Environmental Impact of Food Packaging Materials: A Review of Contemporary Development from Conventional Plastics to Polylactic Acid Based Materials

Use of sustainable packaging materials for fresh beef vacuum packaging application and product assessment using physicochemical means

Packaging material should guarantee the longest possible shelf life of food and help to maintain its quality. The aim of the study was to assess the physicochemical changes taking place during 28-day ageing of beef steaks packed in two types of multilayer films containing biodegradable polymers - polylactic acid (NAT/PLA) and Mater-Bi® (NAT/MBI). The control group consisted of steaks packed in synthetic polyamide/polyethylene (PA/PE) film. The samples stored in NAT/PLA had significantly lower purge loss than the control samples and the lowest expressible water amount after 14 and 21 days. Following blooming, the most favourable colour was shown in steaks stored in NAT/MBI, with the highest values for the L*, a* and C* parameters and the R630/580 ratio, a high proportion of oxymyoglobin, and the lowest share of metmyoglobin. All steaks, regardless of the type of packaging material, had acceptable tenderness and were stable in terms of lipid oxidation.

Role of quality assessment of the recycled packaging material in determining its safety profile as food contact material

Food packaging waste significantly impacts global environmental changes, prompting the adoption of a green circular economy approach. Recycling packaging waste is a critical element of this strategy. However, it faces challenges related to the quality of recycled materials and concerns about their safety. Thus, this review aimed to highlight different analytical methods alone or in combination to evaluate the quality of the recycled material. Furthermore, the safety and health aspects related to the migration of contaminants and their relevant regulations have also been discussed. An important parameter while selecting an appropriate recycling method is the composition and nature of the recyclate, for instance, HDPE (High-Density Polyethylene), PET (Polyethylene Terephthalate), and PP (Polypropylene) materials can be recycled using mechanical and chemical recycling, however, PVC (Polyvinyl Chloride) and PS (Polystyrene) present challenges during mechanical recycling due to lower molecular weight and complex compositions, thus are often downcycled into lower-grade products. Still, recycled papers can be more problematic than recycled plastics due to the nature of the materials and the impact of recycling. The literature review suggested that three quality properties i.e., presence of low molecular weight compounds, degree of degradation, and composition should be analyzed by using different spectroscopic, thermo-mechanical, and chromatographic techniques to obtain a detailed understanding of recycled material quality. Furthermore, recycling should be done in such a way that the migration of contaminants should be lower than the migratory limits set by the relevant authorities to avoid any toxicological effects.

A comprehensive review on starch-based sustainable edible films loaded with bioactive components for food packaging

Biopolymers like starch, a renewable and widely available resource, are increasingly being used to fabricate the films for eco-friendly packaging solutions. Starch-based edible films offer significant advantages for food packaging, including biodegradability and the ability to extend shelf life. However, they also present challenges such as moisture sensitivity and limited barrier properties compared to synthetic materials. These limitations can be mitigated by incorporating bioactive components, such as antimicrobial agents or antioxidants, which enhance the film's resistance to moisture and improve its barrier properties, making it a more viable option for food packaging. This review explores the emerging field of starch-based sustainable edible films enhanced with bioactive components for food packaging applications. It delves into fabrication techniques, structural properties, and functional attributes, highlighting the potential of these innovative films to reduce environmental impact and preserve food quality. Key topics discussed include sustainability issues, processing methods, performance characteristics, and potential applications in the food industry. The review provides a comprehensive overview of current research and developments in starch-based edible films, presenting them as promising alternatives to conventional food packaging that can help reduce plastic waste and environmental impact.

Ginkgo biloba leaf polysaccharide-stabled selenium nanozyme as an efficient glutathione peroxidase mimic for the preservation of bananas and cherry tomatoes

To develop functional, sustainable and eco-friendly active packaging materials as alternatives to plastic films, we successfully prepared Ginkgo biloba leaf polysaccharide-stabilized selenium nanomaterials (Se-GBLP). Se-GBLP with glutathione peroxidase-like activity could efficiently remove harmful reactive oxygen species. As a functional additive, Se-GBLP was incorporated into degradable chitosan (CS) to fabricate CS/Se-GBLP films. The addition of Se-GBLP improved the mechanical properties, UV-visible light barrier performance, water vapor permeability, and antioxidant activity of the films. Preservation experiments demonstrated CS/Se-GBLP film could maintain quality and prolong the storage time of bananas and cherry tomatoes. It was the first time to use selenium-based nanozyme for fruit preservation. This work offered a cost-effective solution to reduce post-harvest losses, increasing sustainability and profitability. Future research should focus on more factors affecting freshness such as variety, maturity, harvest and storage conditions to improve preservation, as well as on the material's safety concern and environmental impact.

Microplastics contamination in commercial fish meal and feed: a major concern in the cultured organisms

The growing scale of plastic pollution causes a devastating impact on the aquatic ecosystem. The people largely depend on animal-based food for their protein requirements. In this study, we analysed 10 different fish meal samples and 20 feed samples used in farming to understand the level of microplastic (MPs) contamination and estimate the amount of MPs ingested by farmed fish, shrimp, and chicken through feed. The abundance of MPs in fish meal samples ranges from 210 ± 98.21 to 1154 ± 235.55 items/kg. The fish meal produced from dried fish is more prone to MPs contamination than that produced from fresh fish. In the case of fish feed, MP abundances range from 50 ± 22.36 to 160 ± 36.57 items/kg in shrimp feeds, 60 ± 26.74 to 230 ± 52.32 items/kg in fish feeds and 90 ± 25.11 to 330 ± 36.12 items/kg in chicken feeds. The exposure rate of MPs is higher in the grower- and finisher-stage feeds than in the starter feed. Fiber-shaped MPs of size 100-500 μm with PE and PP polymers were predominantly found in fish meal and feed samples. EDAX analysis showed the presence of Cr, Cd, Ti, Ni, Cu, As, Al, Pb, Hg, Cd, Ti, Fe, Ca, K, and Si in fish meal samples and Ca, Na, Zn, Cu, Ni, Cl, Al, Si, S, Pb, Cd, Ti, Cr, Mg and Fe in feed samples. The possible level of exposure of microplastic particles was calculated based on MP contamination in feed, feed consumption rate, and body weight. We estimated an MP exposure level of 531-1434 items/kg feed for farmed shrimp, 234-4480 items/kg feed for fishes, and 3519-434,280 items/kg feed for chicken. This study concludes that fish meal and feed are one of the important exposure routes of MPs to the farmed animals.

Enzymatic degradation of polylactic acid (PLA)

Environmental concerns arising from the increasing use of polluting plastics highlight polylactic acid (PLA) as a promising eco-friendly alternative. PLA is a biodegradable polyester that can be produced through the fermentation of renewable resources. Together with its excellent properties, suitable for a wide range of applications, the use of PLA has increased significantly over the years and is expected to further grow. However, insufficient degradability under natural conditions emphasizes the need for the exploration of biodegradation mechanisms, intending to develop more efficient techniques for waste disposal and recycling or upcycling. Biodegradation occurs through the secretion of depolymerizing enzymes, mainly proteases, lipases, cutinases, and esterases, by various microorganisms. This review focuses on the enzymatic degradation of PLA and presents different enzymes that were isolated and purified from natural PLA-degrading microorganisms, or recombinantly expressed. The review depicts the main characteristics of the enzymes, including recent advances and analytical methods used to evaluate enantiopurity and depolymerizing activity. While complete degradation of solid PLA particles is still difficult to achieve, future research and improvement of enzyme properties may provide an avenue for the development of advanced procedures for PLA degradation and upcycling, utilizing its building blocks for further applications as envisaged by circular economy principles. KEY POINTS: • Enzymes can be promisingly utilized for PLA upcycling. • Natural and recombinant PLA depolymerases and methods for activity evaluation are summarized. • Approaches to improve enzymatic degradation of PLA are discussed.

Multi-level toxicity assessment of polylactic acid (PLA) microplastics on the cladoceran Daphnia magna

The accumulation of plastics waste in the environment has raised a worrisome concern, moving the society to seek out for sustainable solutions, such as the transition from the use of fossil-based, conventional plastics to bioplastics (BPs). However, once in the environment bioplastics have the same probability to accumulate and experience weathering processes than conventional plastics, leading to the formation of microplastics (MPs). However, to date the information on the potential toxicity of MPs originated from the weathering of bioplastics is limited. Thus, this study aimed at investigating the adverse effects induced by the exposure to MPs made of a bioplastic polymer, the polylactic acid (PLA), towards the freshwater cladoceran Daphnia magna. Organisms were exposed for 21 days to three concentrations (0.125 µg/mL, 1.25 µg/mL and 12.5 µg/mL) of PLA microplastics (hereafter PLA-MPs). A multi-level approach was performed to investigate the potential effects through the biological hierarchy, starting from the sub-individual up to the individual level. At the sub-individual level, changes in the oxidative status (i.e., the amount of reactive oxygen species and the activity of antioxidant and detoxifying enzymes) and oxidative damage (i.e., lipid peroxidation) were explored. Moreover, the total caloric content as well as the content of protein, carbohydrate and lipid content assess were used to investigate the effects on energy reserves. At individual level the changes in swimming activity (i.e., distance moved and swimming speed) were assessed. Our results showed that the exposure to PLA-MPs induced a slight modulation in the oxidative status and energy reserves, leading to an increase in swimming behavior of treated individuals compared to control conspecifics. These results suggest that the exposure to MPs made of a bioplastic polymer can induce adverse effects similar to those caused by conventional polymers.

Environmental Sustainability of Food Environments: Development and Application of a Framework in 4 cities in South Asia

Background

Food environments, where people directly engage with broader food systems, may be an important contributor to the environmental sustainability of food systems.

Objectives

The primary objectives of this study were to establish a new food environment framework that considers environmental indicators and to assess data availability and gaps using data previously collected as part of a food systems survey in 4 South Asian cities.

Methods

The framework was developed by conducting a structured literature review of previous food environment frameworks and in-depth interviews with content experts (n = 6). The framework and indicators were then mapped to data collected by consumer and vendor surveys using the Urban Food Systems Assessment Tool (UFSAT) in Ahmedabad (India), Pune (India), Kathmandu (Nepal), and Pokhara (Nepal).

Results

We have expanded the sustainability domain within food environments to include consumer travel to food vendors, the presence of food delivery services, policies related to sustainability, vendor food waste, vendor plastic use, vendor utility usage, vendor recycling and waste management practices, and food packaging. Mapping the framework to existing data from 4 cities in South Asia, we found variations in food environment sustainability indicators, particularly regarding consumer transportation to food vendors, the presence of delivery services, and food waste.

Conclusions

Although the majority of food environment research focuses on the availability and affordability of healthy foods, there is an urgent need to understand better how aspects of food environments contribute to environmental goals. When mapping the framework to existing food systems data, we found gaps in data on environmental sustainability in food environments and variation in indicators across settings.

Development of Biodegradable Bioplastics with Sericin and Gelatin from Silk Cocoons and Fish Waste

The bioplastics sector promotes environmentally friendly means of cutting down on the usage of fossil fuels, plastic waste, and environmental pollution. Plastic contamination has detrimental effects on both ecological systems and the global food supply. The approach we present here to resolve this issue involves the integration of sericin and gelatin, obtained from cocoon and fish waste, respectively, with nano-reinforced cellulose crystals, to develop a biodegradable and compostable plastic material. The use of cocoon and fish wastes for the extraction of sericin and gelatin presents an environmentally beneficial approach since it contributes to waste reduction. The sericin level found in silk cocoon waste was determined to be 28.08%, and the gelatin amount in fish waste was measured to be 58.25%. The inclusion of sericin and gelatin in bioplastics was accompanied by the incorporation of glycerol, vinegar, starch, sodium hydroxide, and other coloring agents. Fourier transform infrared (FTIR) examination of bioplastics revealed the presence of functional groups that corresponded to the sericin and gelatin components. The tensile strength of the bioplastic material was measured to be 27.64 MPa/psi, while its thickness varied between 0.072 and 0.316 mm. The results of burial experiments indicated that the bioplastic material had a degradation rate of 85% after 14 days. The invention exhibits potential as a viable alternative for packaging, containment, and disposable plastic materials. The use of this sustainable approach is recommended for the extraction of sericin and gelatin from silk cocoons and fish waste, with the intention of using them as raw materials for bioplastic production.

Development of a Biopolymer-Based Anti-Fog Coating with Sealing Properties for Applications in the Food Packaging Sector

The quest for sustainable and functional food packaging materials has led researchers to explore biopolymers such as pullulan, which has emerged as a notable candidate for its excellent film-forming and anti-fogging properties. This study introduces an innovative anti-fog coating by combining pullulan with poly (acrylic acid sodium salt) to enhance the display of packaged food in high humidity environments without impairing the sealing performance of the packaging material-two critical factors in preserving food quality and consumers' acceptance. The research focused on varying the ratios of pullulan to poly (acrylic acid sodium salt) and investigating the performance of this formulation as an anti-fog coating on bioriented polypropylene (BOPP). Contact angle analysis showed a significant improvement in BOPP wettability after coating deposition, with water contact angle values ranging from ~60° to ~17° for formulations consisting only of poly (acrylic acid sodium salt) (P0) or pullulan (P100), respectively. Furthermore, seal strength evaluations demonstrated acceptable performance, with the optimal formulation (P50) achieving the highest sealing force (~2.7 N/2.5 cm) at higher temperatures (130 °C). These results highlight the exceptional potential of a pullulan-based coating as an alternative to conventional packaging materials, significantly enhancing anti-fogging performance.

Fabrication of a ternary biocomposite film based on polyvinyl alcohol, cellulose nanocrystals, and silver nanoparticles for food packaging

Silver nanoparticles (AgNPs) were loaded on deprotonated cellulose nanocrystals (CNCd) and incorporated into polyvinyl alcohol (PVA) to develop novel active food packaging films. The AgNPs were fabricated using the liquid phase chemical reduction method using the sodium borohydride reductant of AgNO3. The analysis using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA), Differential scanning calorimetry (DSC), and Ultraviolet-visible spectroscopy (UV-Vis) showed that the CNCd surface had a homogeneous distribution of AgNPs with a diameter of about 100 nm. Additionally, CNCd/Ag was successfully incorporated into the PVA film. The developed PVA/CNCd/Ag film showed significantly improved mechanical properties, thermal stability, and UV barrier properties compared to a neat PVA film. The PVA/CNCd/Ag composite film could significantly preserve bananas for 14 days, preventing deterioration and allowing extended storage periods. This composite film generally shows promise in food packaging and prolongs food's shelf life.

Visible light-responsive polylactic acid@pullulan-chitosan/homojunction g-C3N4 bilayer antimicrobial films for fruit preservation

The development of novel packaging materials with antimicrobial properties is crucial in preventing the microbial-induced spoilage of fruits, vegetables, and foodborne illnesses. In this study, homojunction g-C3N4 (HCN) photocatalysts with excellent photocatalytic performance were incorporated into a matrix consisting of pullulan/chitosan (Pul/CS). These photocatalysts were then electrostatically spun onto polylactic acid (PLA) films to fabricate PLA@Pul/CS/HCN nanofibrous composite films. The design of the bilayer films aimed to combine the physical properties of PLA film with the excellent antibacterial properties of nanofiber films, thereby achieving synergistic advantages. The incorporation of the HCN photocatalysts resulted in enhanced hydrophobicity, barrier function, and mechanical properties of the composite films. Under visible light irradiation, the PLA@Pul/CS/HCN films exhibited approximately 3.43 log and 3.11 log reductions of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), respectively, within 2 h. The excellent antimicrobial performance could be attributed to the synergistic effect of CS and the release of reactive oxygen species (ROS) from HCN. Moreover, the strawberries packaged in the PLA@Pul/CS/HCN film demonstrated diminished quality degradation and a prolonged shelf life following visible light irradiation treatment. This study will provide new insights into the exploration of safe and efficient antimicrobial food packaging.

Sustainable packaging materials for fermented probiotic dairy or non-dairy food and beverage products: challenges and innovations

The food and beverage packaging industry has experienced remarkable growth in recent years. Particularly the requirement for appropriate packaging materials used for the sale of fermented products is boosted due to the rising acceptance of economical functional foods available to consumers on the shelves of their local supermarkets. The most popular nutraceutical foods with increased sales include natural yogurts, probiotic-rich milk, kefir, and other fermented food and beverage products. These items have mainly been produced from dairy-based or non-dairy raw materials to provide several product options for most consumers, including vegan and lactose-intolerant populations. Therefore, there is a need for an evaluation of the potential developments and prospects that characterize the growth of the food packaging industry in the global market. The article is based on a review of information from published research, encompassing current trends, emerging technologies, challenges, innovations, and sustainability initiatives for food industry packaging.

Zeolitic imidazolate frameworks (ZIFs): Advanced nanostructured materials to enhance the functional performance of food packaging materials

Zeolite imidazole framework (ZIF) materials are a class of metallic organic framework (MOF) materials that have several potential applications in the food and other industries. They consist of metal ions or clusters of metal ions coordinated with imidazole-based organic linkers, creating a three-dimensional solid structure with well-defined pores and channels. ZIFs possess several important features, including high porosity, tunable pore sizes, high surface areas, adjustable surface chemistries, and good stabilities. These characteristics make them highly versatile materials that can be used in a variety of applications, including smart and active food packaging. Based on their controllable compositions, dimensions, and pore sizes, the properties of ZIFs can be tailored for a diverse range of applications, including energy storage, sensing, separation, encapsulation, and catalysis. In this article, we focus on recent progress and potential applications of ZIFs in food packaging materials. Previous studies have shown that ZIFs can significantly improve the optical, mechanical, barrier, thermal, sustainability, and preservative properties of packaging materials. Moreover, ZIFs can be used as carriers to encapsulate, protect, and control the release of bioactive agents in packaging materials. ZIFs are capable of selectively adsorbing and releasing molecules based on their size, shape, and surface properties. These unique characteristics make them particularly suitable for smart or active food packaging applications. By selectively removing gases (such as oxygen, carbon dioxide, water, or ethylene) ZIFs can improve the shelf life and quality of packaged foods. In addition, they can be employed to control the growth of spoilage microorganisms and minimize oxidation reactions, thereby enhancing the freshness and extending the shelf life of foods. They may also be used to create sensors capable of detecting and indicating food spoilage. For instance, ZIFs that change color or release specific compounds when spoilage products are present can provide visual or chemical indications of food deterioration. This feature is especially valuable in ensuring the safety and quality of packaged food, as it enables consumers and retailers to easily identify spoiled products. ZIFs can be functionalized using various additives, including antioxidants, antimicrobials, pigments, and flavors, which can improve the preservative and sensory properties of packaged foods. Moreover, ZIF-based packaging materials offer sustainability benefits. Unlike traditional plastic packaging, ZIFs are biodegradable and can easily be disposed of without causing harm to the environment, thereby reducing the adverse effects of plastic waste materials. The application of ZIFs in smart/active food packaging offers exciting possibilities for enhancing the shelf life, quality, and safety of foods. With further research and development, ZIF-based packaging could become a sustainable alternative to plastic-based packaging in the food industry. An important aim of this review article is to stimulate further research on the development and application of ZIFs within food packaging materials.

Biomass-derived nanoparticles reinforced chitosan films: as high barrier active packaging for extending the shelf life of highly perishable food

This study emphasizes the potential of biomass-derived nanoparticles such as nanocellulose (NC), nanohemicellulose (NHC), and nanolignin (NL) as reinforcements in chitosan (C) films to produce a higher barrier active packaging film. The incorporation of NC, NHC, and NL (1.5%) significantly improves the mechanical, water, and UV barrier properties of the chitosan film (P < 0.0001). Additionally, NHC and NL reinforcement significantly enhance antioxidant and antimicrobial activity. The physicochemical, sensory, and microbiological properties of fresh meat packed in chitosan films with 1.5% nanoparticles, as well as a commercial LDPE film, were assessed when stored at 4 °C for up to 18 days. C-NHC and C-NL packaging films preserved the quality of meat until the 18th day, whereas the meat packed in the LDPE film spoiled entirely on the sixth day. In conclusion, chitosan films with biomass-derived nanoparticles could be an excellent packaging material for highly perishable food, such as fresh meat, with an extended shelf life.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05896-9.

Recent Progress of Carrageenan-Based Composite Films in Active and Intelligent Food Packaging Applications

Recently, as concerns about petrochemical-derived polymers increase, interest in biopolymer-based materials is increasing. Undoubtedly, biopolymers are a better alternative to solve the problem of synthetic polymer-based plastics for packaging purposes. There are various types of biopolymers in nature, and mostly polysaccharides are used in this regard. Carrageenan is a hydrophilic polysaccharide extracted from red algae and has recently attracted great interest in the development of food packaging films. Carrageenan is known for its excellent film-forming properties, high compatibility and good carrier properties. Carrageenan is readily available and low cost, making it a good candidate as a polymer matrix base material for active and intelligent food packaging films. The carrageenan-based packaging film lacks mechanical, barrier, and functional properties. Thus, the physical and functional properties of carrageenan-based films can be enhanced by blending this biopolymer with functional compounds and nanofillers. Various types of bioactive ingredients, such as nanoparticles, natural extracts, colorants, and essential oils, have been incorporated into the carrageenan-based film. Carrageenan-based functional packaging film was found to be useful for extending the shelf life of packaged foods and tracking spoilage. Recently, there has been plenty of research work published on the potential of carrageenan-based packaging film. Therefore, this review discusses recent advances in carrageenan-based films for applications in food packaging. The preparation and properties of carrageenan-based packaging films were discussed, as well as their application in real-time food packaging. The latest discussion on the potential of carrageenan as an alternative to traditionally used synthetic plastics may be helpful for further research in this field.

Storage stability of Asian seabass oil-in-water Pickering emulsion packed in pouches made from electrospun and solvent casted bilayer films from poly lactic acid/chitosan-gelatin blend containing epigallocatechin gallate

Bilayer pouches were fabricated with chitosan (CS)-fish gelatin (FG) mixture containing epigallocatechin gallate (EGCG) deposited over the poly lactic acid (PLA) film through solvent casting and electrospinning techniques. Pickering emulsions (PE) of Asian seabass depot fat oil stabilized by zein colloidal particles were packed in bilayer pouches and stored at 28 ± 2 °C. The PE packed in pouch containing EGCG had higher emulsion and oxidative stability after 30 days of storage as witnessed by the smaller droplet size and lower values of thiobarbituric acid reactive substances, peroxide, conjugated diene and volatile compounds in comparison with control (PE packed in monolayer PLA pouch) (P < 0.05). EGCG incorporated pouch retained more linoleic acid (C18:2 n-6) and linolenic acid (C18:3 n-9) in emulsion than PLA pouch. Therefore, pouch from bilayer PLA/CS-FG films comprising EGCG could serve as active packaging and extended the shelf life of Pickering emulsion.

Recent advances in modified starch based biodegradable food packaging: A review

This study reviews the importance of resistant starch (RS) as the polymer of choice for biodegradable food packaging and highlights the RS types and modification methods for developing RS from native starch (NS). NS is used in packaging because of its vast availability, low cost and film forming capacity. However, application of starch is restricted due to its high moisture sensitivity and hydrophilic nature. The modification of NS into RS improves the film forming characteristics and extends the applications of starch into the formulation of packaging. The starch is blended with other bio-based polymers such as guar, konjac glucomannan, carrageenan, chitosan, xanthan gum and gelatin as well as active ingredients such as nanoparticles (NPs), plant extracts and essential oils to develop hybrid biodegradable packaging with reduced water vapor permeability (WVP), low gas transmission, enhanced antimicrobial activity and mechanical properties. Hybrid RS based active packaging is well known for its better film forming properties, crystalline structures, enhanced tensile strength, water resistance and thermal properties. This review concludes that RS, due to its better film forming ability and stability, can be utilized as polymer of choice in the formulation of biodegradable packaging.

Plastic food? Energy compensation of zebrafish (Danio rerio) after long-term exposure to polylactic acid biomicroplastics

The extensive use of bio-based plastics has led to their widespread distribution in the environment. However, their long-term ecological impact on aquatic animals is not well understood. In this study, adult zebrafish (Danio rerio) were exposed to 1000 items·L-1 of either polylactic acid (PLA) or polyethylene terephthalate (PET) microplastics (MPs), for 90 days. PLA is a typical bio-based plastic, while PET is a typical petroleum-derived plastic. The abundances of PLA and PET MPs in fish intestines were 981 ± 66 and 671 ± 151 items per fish, respectively, indicating a greater amount of PLA MP residues than PET MPs. However, the inhibitory effect of PET on fish weight was 1.8 times higher than that of PLA, suggesting energy compensation in PLA-treated zebrafish. Proliferation of Lactobacillus was observed in the fish intestines of the PLA group, indicating increased utilization capacity of intestinal flora for lactic acid production during PLA degradation. Metabolomics showed that the tricarboxylic acid pathway was up-regulated in the PLA group compared with that in the PET group, providing evidence of energy compensation. However, more ingested PLA MPs caused more significant histological damage to fish intestines than PET MPs. Therefore, the ecological risks of bio-based plastics still require attention.

Edible packaging as sustainable alternative to synthetic plastic: a comprehensive review

The choice of an appropriate packaging materials enhances the shelf life and improves quality of food during transportation, storage, and distribution. Development and innovations in food packaging systems have become essential in the food industry. Most widely used packaging materials are non-biodegradable plastics and are harmful to environment and human health. Thus, food industry is replacing non-biodegradable plastics with biodegradable plastics to reduce environmental pollution, health hazards, and food waste. Edible packaging may reduce food waste and keep perishables fresh. This review article compares edible packaging materials to synthetic ones and discusses their pollution-reducing effects. The several types of food packaging discussed in the review include those produced from polysaccharides, proteins, lipids, and composite films. The various characteristics of edible packaging are reviewed, including its barrier qualities, carrier properties, mechanical capabilities, and edibility. The carrier properties describe the capacity to transport and manage the release of active substances, and the edibility indicates acceptance of these items by the customers. Plasticizers, antimicrobials, antioxidants, and emulsifiers were included in the edible packaging to enhance the characteristics of the film. The development and implementation of edible packaging on food products from the laboratory to large-scale industrial levels, as well as their potential industrial applications in the dairy, meat, confectionary, poultry, fish, fruit, and vegetable processing sectors are addressed.

Bacteria for Bioplastics: Progress, Applications, and Challenges

Bioplastics are one of the answers that can point society toward a sustainable future. Under this premise, the synthesis of polymers with competitive properties using low-cost starting materials is a highly desired factor in the industry. Also, tackling environmental issues such as nonbiodegradable waste generation, high carbon footprint, and consumption of nonrenewable resources are some of the current concerns worldwide. The scientific community has been placing efforts into the biosynthesis of polymers using bacteria and other microbes. These microorganisms can be convenient reactors to consume food and agricultural wastes and convert them into biopolymers with inherently attractive properties such as biodegradability, biocompatibility, and appreciable mechanical and chemical properties. Such biopolymers can be applied to several fields such as packing, cosmetics, pharmaceutical, medical, biomedical, and agricultural. Thus, intending to elucidate the science of microbes to produce polymers, this review starts with a brief introduction to bioplastics by describing their importance and the methods for their production. The second section dives into the importance of bacteria regarding the biochemical routes for the synthesis of polymers along with their advantages and disadvantages. The third section covers some of the main parameters that influence biopolymers' production. Some of the main applications of biopolymers along with a comparison between the polymers obtained from microorganisms and the petrochemical-based ones are presented. Finally, some discussion about the future aspects and main challenges in this field is provided to elucidate the main issues that should be tackled for the wide application of microorganisms for the preparation of bioplastics.

Antioxidant and UV-blocking activity of PVA/tannin-based bioplastics in food packaging application

In this study, bioplastics with antioxidant and UV protection properties based on tannin and PVA were created for packaging uses. Using a hot water extraction method at various extraction temperatures (60-100 °C), tannins were removed from the bark of Acacia mangium. Tannins with the best antioxidant activity were extracted at 80 °C. In order to create bioplastic formulations (PVA/Tannins), the extract is then employed. The non-heating bioplastic method's preparation (M3) stage produced the highest levels of antioxidant activity. Therefore, subsequent tests were conducted using the non-heating method (M3). On the opacity, UV protective activity, antioxidant capacity, mechanical strength, thermal stability, and water vapor permeability of the resultant bioplastics, the impact of tannin concentration (0.1-0.5 g) was examined. The findings of the experiments demonstrate that PVA/Tannin bioplastics are less transparent than pure PVA. The PVA/tannin bioplastics that are formed, on the whole, show strong antioxidant and UV protection action. Comparing PVA/Tannin bioplastics to pure PVA also revealed a small improvement in thermal stability and tensile strength. In PVA bioplastics with resistant tannins, moisture content was marginally greater even at low tannin concentrations (0.1 g). Based on the findings, bioplastics made from PVA and the tannin A. mangium have the potential to be used to create packaging that is UV and active antioxidant resistant. It can be applied as the second (inner) layer of the primary packaging to protect food freshness and nutrition due to their antioxidant activity.

Biodegradable Polymer Packaging System for 'Benitaka' Table Grapes during Cold Storage

A biodegradable polymer packaging system for 'Benitaka' table grapes (Vitis vinifera L.) was developed to inhibit the development of gray mold during refrigerated storage. The system consisted of packages and sachets containing Na2S2O5 to release sulfur dioxide (SO2), both produced with biodegradable films of starch, glycerol, and poly (adipate co-butylene terephthalate) (PBAT) produced via blown extrusion. The films were characterized in terms of thickness, density, mass loss in water, water vapor permeability, sorption isotherms, and mechanical properties. The table grapes were packed with biodegradable plastic bags containing SO2-releasing sachets inside. The experimental design was completely randomized, with four repetitions and five treatments: (a) control, without sachet containing Na2S2O5 and SiO2; (b) 2 g of Na2S2O5 + 2 g of SiO2; (c) 4 g of Na2S2O5 + 1 g of SiO2; (d) 4 g of Na2S2O5 + 2 g of SiO2; and (e) 4 g of Na2S2O5 + 4 g of SiO2. The bunches were stored in a refrigerated chamber at 1 ± 1 °C and relative humidity above 90%. The treatments were evaluated 30 and 45 days after the beginning of refrigerated storage and 3 days at room temperature. The grapes were evaluated based on the incidence of gray mold, mass loss, stem browning, shattered berries, and berry bleaching. The data were subjected to the analysis of variance, and the means were compared using Tukey's test at 5%. The biodegradable films had good processability during the production via blown extrusion, with good physical properties to be used in the packaging of grapes and the production of SO2-releasing sachets. The biodegradable polymer packaging system (biodegradable plastic bags + SO2-releasing sachets) inhibited the development of gray mold on 'Benitaka' table grapes for 45 days at 1 °C, preserving their quality, with low mass loss, few shattered berries, and rachis freshness.

Novel edible films fabricated with HG-type pectin extracted from different types of hybrid citrus peels: Effects of pectin composition on film properties

This study investigated the valorization of novel HG-type hybrid citrus pectins derived from three cultivars: Setoka (ST), Kanpei (KP), and Shiranui (SH), and their application as packaging materials. The physicochemical properties of these pectins and their corresponding films were evaluated and compared to commercial citrus pectin. Significant variations were observed in pectin yield (18.15-24.12 %) and other physicochemical characteristics, such as degree of esterification (DE), degree of methoxylation (DM), and monosaccharide composition, among the different cultivars. All hybrid citrus pectins were classified as high-methoxy pectin types (66.67-72.89 %) with typical structural configurations like commercial citrus pectin. However, hybrid citrus pectin films exhibited superior physical properties, including higher mechanical strength, flexibility, and lower water solubility than commercial citrus pectin film, while maintaining similar transparency and moisture content. Additionally, the films displayed smooth and uniform surface morphology, confirming their excellent film-forming properties. Correlation analysis revealed that DE positively influenced mechanical properties (r = 1.0). Furthermore, the monosaccharide composition of pectins showed strong relationships (r = 0.8-1.0) with the film's mechanical and barrier properties. These findings highlight the potential of hybrid citrus pectin as potential packaging material, and the knowledge of the structure-function relationship obtained in this study could be useful for the tailored modification of citrus pectin-based packages.

In-situ formation of thermo-responsive petal-like cellulose nanocrystals hybridized particles towards optimizing mechanical, rheological and dielectric properties of polylactic acid blends

Enhancing the toughness of biodegradable polylactic acid (PLA) blends with minimal filler content meanwhile preserving their thermomechanical properties remains a highly desirable objective. Here, through a simple in situ mixing of PLA with cellulose nanocrystals (CNC) and cellulose nanocrystal nanofluids (CNCfs), the electrostatic interaction between CNCfs (+22.6 mv) and CNC (-9.07 mv) formed petal-like hybridized particles with CNCfs as the core and CNC particles as the outer layer. The rheological tests indicated a significant reduction in the zero-shear viscosity and storage modulus of PLA/CNCfs blends, while the viscosity of PLA/CNCfs@CNC slightly decreased but retained its storage modulus compared to pure PLA. The optimized PLA/CNCfs@CNC blends not only exhibited excellent melt processing performance, but also increased the elongation at break (increased by 184 % and 375 % at 8 °C and 45 °C, respectively) and enhanced toughness remarkably (increased by 3.5 and 3.3-fold at 8 °C and 45 °C, respectively) meantime retaining the modulus with 1 GPa. The addition of CNCfs@CNC hardly affects the glass transition temperature and thermo-mechanical properties of PLA. The dielectric properties of PLA/CNCfs1.0/CNC2.0 blends were maximized at 1000 Hz, reaching a value of 21, which can be attributed to the synergistic effect of multilayer interfacial polarization.

Plastic pollution from takeaway food industry in China

China's takeaway food industry is growing rapidly, and bringing unprecedented demand for plastic packaging, which results in serious plastic pollution and increasing emissions of plasticizers of phthalate esters (PAEs) and greenhouse gases (GHGs). This study assesses the current and future situation of plastic usage for takeaway food packaging in China, and also analyzes the PAEs and GHG emissions brought by these plastics under different scenarios. From 2010 to 2020, the plastic usage grew from 2.92 to 101 × 104 tons, and brought 112-3845 kg PAEs and 43.6-1438 kt CO2e GHG emissions. Their distribution exhibited a clear 'two-line' pattern: higher features mostly located in Beijing-Guangzhou and Beijing-Shanghai railways. The socio-economic factors model performed better than the growth rate model for plastic usage prediction from 2021 to 2060. It is predicted that 40.6 Mt. plastic would be consumed in 2060, and they will bring 155 tons PAEs and 37.0 Mt. CO2e GHGs. At that time, biodegradable plastic replaced or plastic cycling cannot significantly contribute to national carbon reduction, unless using a temperature change of 2 °C scenario. Our work improves the understanding of PAEs and GHG emission from plastic pollution, and provides insight into long-term dynamics in the plastics management of takeaway food industry.

Ultraviolet blocking ability, antioxidant and antibacterial properties of newly prepared polyvinyl alcohol-nanocellulose‑silver nanoparticles-ChunJian peel extract composite film

In this work, nanocellulose (CNC) from waste water chestnut (WCT) shell was firstly used for preparing nanocomposite films, by using ChunJian peel extract (CJPE) as a green reducing agent to synthesize silver nanoparticles (AgNPs), and then loading them into polyvinyl alcohol-nanocellulose (PVA-CNC) matrix, a multifunctional nanocomposite material that could be used in food packaging was developed. The prepared films were tested for mechanical strength, barrier properties, thermal properties, antibacterial, antioxidant and biocompatibility through various characterizations. The PVA-CNC-AgNPs-CJPE film had good thermostability, mechanical strength, barrier properties, and biocompatibility. Compared with pure PVA film and PVA-CNC film, PVA-CNC-AgNPs-CJPE could shield over 95 % of the UVB (320-275 nm) spectrum and UVC (275-200 nm) spectrum and most of the UVA (400-320 nm). By disk diffusion analysis, the inhibition zones of PVA-CNC-AgNPs-CJPE film against E. coli, P. aeruginosa, S. aureus and E. faecalis were 22.3 mm, 25.0 mm, 22.0 mm and 19.3 mm, respectively. The milk antibacterial simulation test confirmed that PVA-CNC-AgNPs-CJPE film could effectively limit bacterial reproduction and prolong the shelf life of milk. PVA-CNC-AgNPs-CJPE film had excellent UV barrier properties, good antioxidant properties and high-efficiency antibacterial activity, which is expected to be widely used in sustainable nanocomposite food packaging.

Self-healing polymers for surface scratch regeneration

Recently, there has been a significant increase in academic and industrial interest in self-healing polymers (SHPs) due to their remarkable ability to regenerate scratched surfaces and materials of astronomical significance. Scientists have been inspired by the magical repairing mechanism of the living world. They transformed the fiction of self-healing into reality by designing engrossing polymeric materials that could self-repair mechanical abrasions repeatedly. As a result, the durability of the materials is remarkably improved. Thus, the idea of studying SHPs passively upholds economic and environmental sustainability. However, the critical areas of self-healing (including healing efficiency, healing mechanism, and thermo-mechanical property changes during healing) are under continuous scientific improvisation. This review highlights recent notable advances of SHPs for application in regenerating scratched surfaces with various distinctive underlying mechanisms. The primary focus of the work is aimed at discussing the impact of SHPs on scratch-healing technology. Beyond that, insights regarding scratch testing, methods of investigating polymer surfaces, wound depths, the addition of healing fillers, and the environmental conditions maintained during the healing process are reviewed thoroughly. Finally, broader future perspectives on the challenges and prospects of SHPs in healing surface scratches are discussed.

New Functional Bionanocomposites by Combining Hybrid Host-Guest Systems with a Fully Biobased Poly(lactic acid)/Poly(butylene succinate-co-adipate) (PLA/PBSA) Binary Blend

In this study, we have developed innovative polymer nanocomposites by integrating magnesium-aluminum layered double hydroxide (LDH)-based nanocarriers modified with functional molecules into a fully biobased poly(lactic acid)/poly(butylene succinate-co-adipate) (PLA/PBSA) matrix. These LDH-based hybrid host-guest systems contain bioactive compounds like rosmarinic acid, ferulic acid, and glycyrrhetinic acid, known for their antioxidant, antimicrobial, and anti-inflammatory properties. The bioactive molecules can be gradually released from the nanocarriers over time, allowing for sustained and controlled delivery in various applications, such as active packaging or cosmetics. The morphological analysis of the polymer composites, prepared using a discontinuous mechanical mixer, revealed the presence of macroaggregates and nano-lamellae at the polymer interface. This resulted in an enhanced water vapor permeability compared to the original blend. Furthermore, the migration kinetics of active molecules from the thin films confirmed a controlled release mechanism based on their immobilization within the lamellar system. Scaling-up experiments evaluated the materials' morphology and mechanical and thermal properties. Remarkably, stretching deformation and a higher shear rate during the mixing process enhanced the dispersion and distribution of the nanocarriers, as confirmed by the favorable mechanical properties of the materials.

Recent Advances in Functional Cellulose-based Films with Antimicrobial and Antioxidant Properties for Food Packaging

The packaging of food plays a crucial role in food preservation worldwide. However, traditional packaging systems are passive layers with weak efficiency in protecting the food quality. Therefore, packaged foods are gradually spoiled due to the oxidation and growth of microorganisms. Additionally, most of the commercial packaging films are made of petroleum-based materials which raise environmental concerns. Accordingly, the development of eco-friendly natural-derived active packaging systems has increased the attention of scientists. Cellulose as the most abundant polysaccharide on earth with high biocompatibility, no toxicity, and high biodegradability has extensively been applied for the fabrication of packaging films. However, neat cellulose-based films lack antioxidant and antimicrobial activities. Therefore, neat cellulose-based films are passive films with weak food preservation performance. Active films have been developed by incorporating antioxidants and antimicrobial agents into the films. In this review, we have explored the latest research on the fabrication of antimicrobial/antioxidant cellulose-based active packaging films by incorporating natural extracts, natural polyphenols, nanoparticles, and microparticles into the cellulose-based film formulations. We categorized these types of packaging films into two main groups: (i) blend films which are obtained by mixing solutions of cellulose with other soluble antimicrobial/antioxidant agents such as natural extracts and polyphenols; and (ii) composite films which are fabricated by dispersing antimicrobial/antioxidant nano- or microfillers into the cellulose solution. The effect of these additives on the antioxidant and antimicrobial properties of the films has been explained. Additionally, the changes in the other properties of the films such as hydrophilicity, water evaporation rate, and mechanical properties have also been briefly addressed.

Food safety culture maturity and its relation to company and employee characteristics

Three facets of food safety culture (FSC) (i.e., food safety management system (FSMS), human-organizational and human-individual building block), were diagnosed through a validated mixed-method assessment in twenty food processing companies. Many underdeveloped dimensions were detected in the FSMS and the human-organizational building block, while the human-individual building block was more mature. It was explored whether company (e.g., company size) and employee characteristics (e.g. leaders vs. non-leaders) are associated with FSC maturity (based on 1410 employee responses) through a cluster analysis and statistical (Mann-Whitney U and Kruskal-Wallis) tests. Results revealed significant differences (p-value <0.05) based on company characteristics (significant differences based on: size, belonging to a larger group, product type, place in the supply chain, training frequency, certificates, maturity of control and assurance activities) and employee characteristics (significant differences based on: leaders vs. non-leaders, daily direct contact with food or not, seniority, time since training and psychosocial well-being). These findings are useful to develop tailored food safety culture improvement interventions to enhance the maturity of food safety culture in food companies, as these might focus on lower perceiving (sub)groups of employees or lower perceiving (sub)groups of companies.

Phytochemicals and bioactive constituents in food packaging - A systematic review

Designing and manufacturing functional bioactive ingredients and pharmaceuticals have grown worldwide. Consumers demand for safe ingredients and concerns over harmful synthetic additives have prompted food manufacturers to seek safer and sustainable alternative solutions. In recent years the preference by consumers to natural bioactive agents over synthetic compounds increased exponentially, and consequently, naturally derived phytochemicals and bioactive compounds, with antimicrobial and antioxidant properties, becoming essential in food packaging field. In response to societal needs, packaging needs to be developed based on sustainable manufacturing practices, marketing strategies, consumer behaviour, environmental concerns, and the emergence of new technologies, particularly bio- and nanotechnology. This critical systematic review assessed the role of antioxidant and antimicrobial compounds from natural resources in food packaging and consumer behaviour patterns in relation to phytochemical and biologically active substances used in the development of food packaging. The use of phytochemicals and bioactive compounds inside packaging materials used in food industry could generate unpleasant odours derived from the diffusion of the most volatile compounds from the packaging material to the food and food environment. These consumer concerns must be addressed to understand minimum concentrations that will not affect consumer sensory and aroma negative perceptions. The research articles were carefully chosen and selected by following the Preferred Reporting Items for Systematic Reviews (PRISMA) guidelines.

Innovations in Food Packaging for a Sustainable and Circular Economy

Packaging is fundamental to maintaining the quality of food, but its contribution with a negative footprint to the environment must be completely changed worldwide to reduce pollution and climate change. Innovative and sustainable packaging and new strategies of reutilization are necessary to reduce plastic waste accumulation, maintain food quality and safety, and reduce food losses and waste. The purpose of this chapter is to present innovations in food packaging for a sustainable and circular economy. First, to present the eco-design packaging approach as well as new strategies for recycled or recyclable materials in food packaging. Second, to show current trends in new packaging materials developed from the use of agro-industrial wastes as well as new methods of production, including 3D/4D printing, electrostatic spinning, and the use of nanomaterials.

A Nanozymatic-Mediated Smartphone Colorimetric Sensing Platform for the Detection of Dimethyl Phthalate (DMP) and Dibutyl Phthalate (DBP)

Plasticizers are a type of toxic substance that may remain in food, posing significant health risks including carcinogenic, teratogenic, mutagenic, and other adverse effects. In this study, a novel strategy was employed by combining Pt@Au nanozymes with high catalytic properties to created two catalytic signal probes, designated as Pt@Au@Ab1 and Pt@Au@Ab2, specifically designed for the detection of dimethyl phthalate (DMP) and dibutyl phthalate (DBP). These catalytic signal probes served as the foundation for the development of a colorimetric immunoassay, enabling the simultaneous detection of both DMP and DBP. The colorimetric immunoassay is capable of detecting DMP in the range of 0.5-100 μg/L with a limit of detection as low as 0.1 μg/L and DBP in the range of 1-32 μg/L with a low limit of detection of 0.5 μg/L. The developed immunoassay can be used for the determination of the DMP and DBP in baijiu and plastic bottled drinks. The recovery rate is in the range of 96.4% and 100.5% and the coefficient of variation is between 1.0% and 7.2%. This innovative colorimetric immunoassay offers a robust tool for the simultaneous quantification of DMP and DBP in real samples.

Effect of Edible Coating Made from Arrowroot Flour and Kaffir Lime Leaf Essential Oil on the Quality Changes of Pork Sausage under Prolonged Refrigerated Storage

Edible coatings are pivotal in enhancing the quality of processed meat products, acting as barriers to environmental and microbial influences by adhering directly to the food surface. Arrowroot flour, a widely produced edible tuber in Thailand, is uncharted in terms of its capability and effectiveness as an edible coating on food materials. This study aims to elucidate the composition and spectral properties of arrowroot tuber flour (ATF) to discern its viability as an edible coating for pork sausages. ATF exhibited a composition predominantly featuring carbohydrates (74.78%), moisture (9.59%), and protein (8.89%), underlining its appropriateness as an edible coating. Rapid visco amylograph revealed ATF's significant pasting capability. This study incorporated kaffir lime leaves essential oil (KEO) into the ATF coating in diverse concentrations (0-3%). Fourier-transform Infrared spectroscopy illuminated characteristic peaks and bands, showing observable shifts with the integration of KEO, yet the majority of peak placements remained essentially unchanged. The microstructure of the coatings maintained its homogeneity at heightened KEO concentrations, reflecting compatibility with ATF. The efficacy of the ATF-KEO coatings was evaluated on pork sausages, using uncoated samples as controls. While color modifications were evident, coated sausages maintained consistent moisture content, water activity, and pH levels throughout the storage duration. The coated samples also manifested enhanced textural attributes and a decline in lipid oxidation, as evidenced by reduced TBARS levels compared to controls. A subsequent microbial examination corroborated the inhibitory capacity of the ATF-KEO coatings on the microbial proliferation in pork sausages, encapsulating Total Viable Count (TVC), psychrotrophic bacteria, and lactic acid bacteria. In conclusion, the findings substantiate the promising application of ATF, especially in synergy with KEO, as a proficient edible coating for meat products. This combination aids in preserving color and texture, impeding microbial advancement, and moderating lipid oxidation, thereby contributing to the overall quality and safety of the products.

Effect of Nano-Silica and Sorbitol on the Properties of Chitosan-Based Composite Films

Chitosan and its derivatives are widely used in food packaging, pharmaceutical, biotechnology, medical, textile, paper, agriculture, and environmental industries. However, the flexibility of chitosan films is extremely poor, which limits its relevant applications to a large extent. In this paper, chitosan/sorbitol/nano-silica (CS/sorbitol/SiO2) composite films were prepared by the casting film method using chitosan, sorbitol, Tween-80 and nano-SiO2 as raw materials. The structure of the films was characterized by infrared spectroscopy, electron scanning microscopy, and X-ray diffraction analysis. The effects of sorbitol and nano-silica dosage on the mechanical properties, thermal properties and water vapor barrier properties of the composite film were investigated. The results show that with the gradual increase in sorbitol (≤75 wt %), the elongation at the break of chitosan/sorbitol films significantly increased. When the addition of sorbitol was 75 wt %, the elongation at break of the chitosan/sorbitol composite film was 13 times higher than that of the chitosan film. Moreover, nano-SiO2 can further improve the mechanical properties and thermal stability of the chitosan/sorbitol composite films. When the amount of nano-silica was 4.5 wt %, the composite film became more flexible, with a maximum elongation of 90.8% (which is 14 times that of chitosan film), and its toughness increased to 10.52 MJm-3 (which is 6 times that of chitosan film). This study balances the tensile strength and elongation at break of the composite films by adding a plasticizer and nano-filler, providing a reference for the preparation of chitosan composites or their blending with other polymers, and has practical guiding significance for the industrial production of biomass plastics.

The Mechanisms of Plastic Food-Packaging Monomers' Migration into Food Matrix and the Implications on Human Health

The development of packaging technology has become a crucial part of the food industry in today's modern societies, which are characterized by technological advancements, industrialization, densely populated cities, and scientific advancements that have increased food production over the past 50 years despite the lack of agricultural land. Various types of food-packaging materials are utilized, with plastic being the most versatile. However, there are certain concerns with regards to the usage of plastic packaging because of unreacted monomers' potential migration from the polymer packaging to the food. The magnitude of monomer migration depends on numerous aspects, including the monomer chemistry, type of plastic packaging, physical-chemical parameters such as the temperature and pH, and food chemistry. The major concern for the presence of packaging monomers in food is that some monomers are endocrine-disrupting compounds (EDCs) with a capability to interfere with the functioning of vital hormonal systems in the human body. For this reason, different countries have resolved to enforce guidelines and regulations for packaging monomers in food. Additionally, many countries have introduced migration testing procedures and safe limits for packaging monomer migration into food. However, to date, several research studies have reported levels of monomer migration above the set migration limits due to leaching from the food-packaging materials into the food. This raises concerns regarding possible health effects on consumers. This paper provides a critical review on plastic food-contact materials' monomer migration, including that from biodegradable plastic packaging, the monomer migration mechanisms, the monomer migration chemistry, the key factors that affect the migration process, and the associated potential EDC human health risks linked to monomers' presence in food. The aim is to contribute to the existing knowledge and understanding of plastic food-packaging monomer migration.

Recent advances on natural colorants-based intelligent colorimetric food freshness indicators: fabrication, multifunctional applications and optimization strategies

With the increasing concerns of food safety and public health, tremendous efforts have been concentrated on the development of effective, reliable, nondestructive methods to evaluate the freshness level of different kinds of food. Natural colorants-based intelligent colorimetric indicators which are typically constructed with natural colorants and polymer matrices has been regarded as an innovative approach to notify the customers and retailers of the food quality during the storage and transportation procedure in real-time. This review briefly elucidates the mechanism of natural colorants used for intelligent colorimetric indicators and fabrication methodologies of natural colorants-based food freshness indicators. Subsequently, their multifunctional applications in intelligent food packaging systems like antioxidant packaging, antimicrobial packaging, biodegradable packaging, UV-blocking packaging and inkless packaging are well introduced. This paper also summarizes several optimizing strategies for the practical application of this advanced technology from different perspectives. Strategies like adopting a hydrophobic matrix, constructing double-layer film and encapsulation have been developed to improve the stability of the indicators. Co-pigmentation, metal ion complexation, pigment-mixing and using substrates with high surface area are proved to be effective to enhance the sensitivity of the indicators. Approaches include multi-index evaluation, machine learning and smartphone-assisted evaluation have been proven to improve the accuracy of the intelligent food freshness indicators. Finally, future research opportunities and challenges are proposed. Based on the fundamental understanding of natural colorants-based intelligent colorimetric food freshness indicators, and the latest research and findings from literature, this review article will help to develop better, lower cost and more reliable food freshness evaluation technique for modern food industry.

Multifunctional chromone-incorporated poly(hydroxybutyrate) luminescent film for active and intelligent food packaging

The major objective of present work was to fabricate poly(hydroxybutyrate) based luminescent films for genuine food packaging applications. These films were synthesized by incorporating varying Chromone (CH) concentrations (5, 10, 15, 20, and 25 wt%) into poly(hydroxybutyrate) (PHB) matrix through solvent-casting. Different characteristics of prepared films were examined using Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Thermogravimetric analysis (TGA), Mechanical testing, and Time-resolved photoluminescence (TRPL). UV-blocking properties and water vapor permeation were also examined. FTIR spectra indicated the occurrence of hydrogen bonding between PHB and CH. Among all prepared film samples, PHB/CH15 showed maximum tensile strength (22.5 MPa) with enhanced barrier ability against water vapor and UV rays, thermal stability, and luminescent performance. After overall analysis, PHB/CH15 film was selected to investigate its X-ray diffraction, release behavior, DPPH scavenging, and antimicrobial potential. Release kinetics revealed that the cumulative release percentage of CH was higher in fatty acid stimulant. Moreover, results suggested that this film demonstrated antioxidant activity (>55 %) and superior antimicrobial potential against Aspergillus niger, Staphylococcus aureus, and Escherichia coli. Furthermore, packaging of bread samples using PHB/CH15 film demonstrated the complete inhibition of microbial growth in bread up to 10 days of storage and ensure the safety of genuine food products.

Lignins as Promising Renewable Biopolymers and Bioactive Compounds for High-Performance Materials

The recycling of biomass into high-value-added materials requires important developments in research and technology to create a sustainable circular economy. Lignin, as a component of biomass, is a multipurpose aromatic polymer with a significant potential to be used as a renewable bioresource in many fields in which it acts both as promising biopolymer and bioactive compound. This comprehensive review gives brief insights into the recent research and technological trends on the potential of lignin development and utilization. It is divided into ten main sections, starting with an outlook on its diversity; main properties and possibilities to be used as a raw material for fuels, aromatic chemicals, plastics, or thermoset substitutes; and new developments in the use of lignin as a bioactive compound and in nanoparticles, hydrogels, 3D-printing-based lignin biomaterials, new sustainable biomaterials, and energy production and storage. In each section are presented recent developments in the preparation of lignin-based biomaterials, especially the green approaches to obtaining nanoparticles, hydrogels, and multifunctional materials as blends and bio(nano)composites; most suitable lignin type for each category of the envisaged products; main properties of the obtained lignin-based materials, etc. Different application categories of lignin within various sectors, which could provide completely sustainable energy conversion, such as in agriculture and environment protection, food packaging, biomedicine, and cosmetics, are also described. The medical and therapeutic potential of lignin-derived materials is evidenced in applications such as antimicrobial, antiviral, and antitumor agents; carriers for drug delivery systems with controlled/targeting drug release; tissue engineering and wound healing; and coatings, natural sunscreen, and surfactants. Lignin is mainly used for fuel, and, recently, studies highlighted more sustainable bioenergy production technologies, such as the supercapacitor electrode, photocatalysts, and photovoltaics.

Use of fenugreek seed gum in edible film formation: major drawbacks and applicable methods to overcome

Researching on potential biopolymer sources with the aim of developing edible films with better mechanical and barrier properties has become innovative as it would be a key factor to minimize the use of synthetic polymers in food packaging. Therefore, different biopolymers such as galactomannan have been gaining attention recently. Fenugreek seed gum is a rich source of galactomannan which is minimally researched on its applicability in edible film making. The degree of galactose substitution and polymerization are the main factors that determine the functional properties of galactomannan. A strong and cohesive film matrix cannot be produced from fenugreek seed gum as its molecular interaction is weakened due to the high galactose substitution with a high galactose/mannose ratio, 1:1. Structural modifications of galactomannan in fenugreek seed gum will lead to films with the required mechanical properties. Hence, this review summarizes recent scientific studies on the limitations of fenugreek seed gum as a film forming agent and the specific modification techniques that can be applied in order to increase its film forming capability and performance.

Opportunities and Challenges of Establishing a Regional Bio-based Polylactic Acid Supply Chain

Polylactic acid (PLA) is the bioplastic with the highest market share. However, it is mainly produced from first-generation feedstock and there are various inconsistencies in the literature in terms of its production and recycling processes, carbon footprint, and prices. The aim of this study is to compile and contrast these aspects and investigate second-generation PLA production from technical, economic, and ecological perspectives simultaneously. The comprehensive analyses also show the chances and challenges of originating a PLA supply chain in a specific region. Herein, the German Federal State of North Rhine-Westphalia (NRW) has been chosen as a region of interest. In addition to highlighting the industrial capabilities and synergies, the study quantifies and illustrates the locations of different suitable second-generation feedstocks in the region. However, the identified potentials can be challenged by various obstacles such as the high demand of bioresources, feedstock quality, spatial aspects, and logistics. Furthermore, the substantial price gap between PLA and fossil-based plastics can also discourage the investors to include PLA on their portfolios. Thus, the study also provides recommendations to overcome these obstacles and promote the regional value chains of bioplastics which may serve as prototype for other regions.

Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging

The present study is focused on polylactic acid (PLA) blending with bio nanoadditives, such as Tonsil^® (clay) and Aerosil^®, to obtain nanocomposites for a new generation of food packaging. The basic composition was enhanced using Sorbitan oleate (E494) and Proviplast as plasticizers, increasing the composite samples' stability and their mechanical strength. Four mixtures were prepared: S1 with Tonsil^®; S2 with Aerosil^®; S3 with Aerosil^® + Proviplast; and S4 with Sabosorb. They were complexly characterized by FT-IR spectroscopy, differential scanning calorimetry, mechanical tests on different temperatures, and absorption of the saline solution. FTIR shows a proper embedding of the filler component into the polymer matrix and DSC presents a good stability at the living body temperature for all prepared samples. Micro and nanostructural aspects were evidenced by SEM and AFM microscopy, revealing that S3 has the most compact and uniform filler distribution and S4 has the most irregular one. Thus, S3 evidenced the best diametral tensile strength and S4 evidenced the weakest values. All samples present the best bending strength at 18 °C and fair values at 4 °C, with the best values being obtained for the S1 sample and the worst for S4. The lack of mechanical strength of the S4 sample is compensated by its best resistance at liquid penetration, while S1 is more affected by the liquid infiltrations. Finally, results show that PLA composites are suitable for biodegradable and disposable food packages, and the desired properties could be achieved by proper adjustment of the filler proportions.

Investigation of the Effect of Hybrid Nanofiller on the Mechanical Performance and Surface Properties of Bio-Based Polylactic Acid/Polyolefin Elastomer (PLA/POE) Blend

Polylactic acid has stood out among bio-based polymers for its usage in the food packaging industry and biomedical fields. Through the melt mixing process, the toughened poly(lactic) acid (PLA) was prepared with polyolefin elastomer (POE), incorporated via various ratios of nanoclay and a fixed amount of nanosilver particles (AgNPs). The correlation between the compatibility and morphology, mechanical properties, and surface roughness of samples with nanoclay was studied. The calculated surface tension and melt rheology confirmed the interfacial interaction demonstrated by droplet size, impact strength, and elongation at break. Each blend sample exhibited matrix-dispersed droplets, and the size of POE droplets steadily dropped with increasing nanoclay content, corresponding to the enhanced thermodynamic affinity between PLA and POE. Scanning electron microscopy (SEM) acknowledged that the inclusion of nanoclay in the PLA/POE blend ameliorated the mechanical performance by preferable localization in the interface of used components. The optimum value of elongation at break was acquired at about 32.44%, where the incorporation of 1 wt.% nanoclay led, respectively, to 171.4% and 24% enhancement rather than the PLA/POE blend with the composition of 80/20 and the virgin PLA. Similarly, the impact strength reached 3.46 ± 0.18 kJ m^-1 as the highest obtained amount, showing the proximity of 23% progress to the unfilled PLA/POE blend. Surface analysis indicated that adding nanoclay caused the augment of surface roughness from 23.78 ± 5.80 µm in the unfilled PLA/POE blend to 57.65 ± 18.2 µm in PLA/POE contained 3 wt.% nanoclay. Rheological measurements implied that organoclay resulted in the strengthening of melt viscosity as well as the rheological parameters such as storage modulus and loss modulus. Han plot further showed that the storage modulus is always higher than the loss modulus in all prepared PLA/POE nanocomposite samples, corresponding to the restriction of polymer chains mobility induced by the formation of strong molecular interaction between nanofillers and polymer chains.

Recent Advances in Halal Bioactive Materials for Intelligent Food Packaging Indicator

Food safety and security are top priorities for consumers and the food industry alike. Despite strict standards and criteria for food production processes, the potential for food-borne diseases due to improper handling and processing is always present. This has led to an urgent need for solutions that can ensure the safety of packaged foods. Therefore, this paper reviews intelligent packaging, which employs non-toxic and environmentally friendly packaging with superior bioactive materials that has emerged as a promising solution. This review was prepared based on several online libraries and databases from 2008 to 2022. By incorporating halal bioactive materials into the packaging system, it becomes possible to interact with the contents and surrounding environment of halal food products, helping preserve them for longer periods. One particularly promising avenue of research is the use of natural colourants as halal bioactive materials. These colourants possess excellent chemical, thermal, and physical stabilities, along with antioxidant and antimicrobial properties, making them ideal candidates for use in intelligent indicators that can detect food blemishes and prevent pathogenic spoilage. However, despite the potential of this technology, further research and development are needed to promote commercial applications and market development. With continued efforts to explore the full potential of natural colourants as halal bioactive materials, we can meet the increasing demand for food safety and security, helping to ensure that consumers have access to high-quality, safe, and nutritious foods.

Production of nanocellulose from corn husk for the development of antimicrobial biodegradable packaging film

Packaging is a potential way of keeping food products safe from various environmental pollutants, and biological, chemical, & physical deterioration. Hence, the demand for an effective antimicrobial active packaging material is increasing tremendously to improve the shelf-life of food products. Thus, we extracted nanocellulose from corn husks and developed a eugenol-incorporated biodegradable antimicrobial active packaging film. The extracted nanocellulose showed a particle size of 149.67 ± 3.56 nm and an overall surface charge of -20.2 mV ± 0.76 V. The film casting method is one of the promising methods to fabricate biodegradable films using plant-based biopolymers. Therefore, different concentrations of eugenol (0.5-5 % v/v) were incorporated to formulate the functional film (FF0.5-FF5) by employing the casting process. FF exhibited comparable tensile strength as compared to the control film (CF), however, FF5 showed the least tensile strength (85 MPa). Based on the mechanical characterization, the FF3 film sample was further selected for characterization. The morphological evaluation revealed that the surface of the film was smooth and non-porous with reduced moisture content and density. The film exhibited high thermal stability as the degradation occurred above 400 °C, indicating the strong hydrogen bonding between the hydroxyl groups of the film. The Fourier transform infrared spectroscopy analysis revealed the existence of COOH vibration and COC stretching groups of cellulose and eugenol. The antimicrobial studies showed high efficacy against Staphylococcus aureus followed by Salmonella typhmurium, Pseudomonas aeruginosa, and Klebsiella pneumoniae bacteria. Overall, eugenol-incorporated nanocellulose-based biodegradable packaging film could be an excellent candidate as an alternative to active packaging material and provide an opportunity for the efficient utilization of corn husk.

Morphology and Properties of Polylactic Acid Composites with Butenediol Vinyl Alcohol Copolymer Formed by Melt Blending

Due to its poor toughness and hydrophilicity, the application of polylactic acid (PLA) in the field of absorbent sanitary materials is restricted. A butenediol vinyl alcohol copolymer (BVOH) was used to improve PLA via melt blending. The morphology, molecular structure, crystallization, thermal stability, tensile property, and hydrophilicity of PLA/BVOH composites with different mass ratios were investigated. The results show that the PLA/BVOH composites possessed a two-phase structure with good interfacial adhesion. The BVOH could effectively blend into PLA without a chemical reaction. The addition of the BVOH promoted the crystallization of PLA, improved the perfection of the crystalline region, and increased the glass transition temperature and melting temperature of PLA in the heating process. Moreover, the thermal stability of PLA was markedly improved by adding the BVOH. The addition of the BVOH also had a significant effect on the tensile property of the PLA/BVOH composites. When the content of the BVOH was 5 wt.%, the elongation at the break of the PLA/BVOH composites could reach 9.06% (increased by 76.3%). In addition, the hydrophilicity of PLA was also significantly improved, and the water contact angles decreased with the increase in the BVOH content and time. When the content of the BVOH was 10 wt.%, the water contact angle could reach 37.3° at 60 s, suggesting good hydrophilicity.

Study of PLA pre-treatment, enzymatic and model-compost degradation, and valorization of degradation products to bacterial nanocellulose

It is well acknowledged that microplastics are a major environmental problem and that the use of plastics, both petro- and bio- based, should be reduced. Nevertheless, it is also a necessity to reduce the amount of the already spread plastics. These cannot be easily degraded in the nature and accumulate in the food supply chain with major danger for animals and human life. It has been shown in the literature that advanced oxidation processes (AOPs) modify the surface of polylactic acid (PLA) materials in a way that bacteria more efficiently dock on their surface and eventually degrade them. In the present work we investigated the influence of different AOPs (ultrasounds, ultraviolet irradiation, and their combination) on the biodegradability of PLA films treated for different times between 1 and 6 h. The pre-treated samples have been degraded using a home model compost as well as a cocktail of commercial enzymes at mesophilic temperatures (37 °C and 42 °C, respectively). Degradation degree has been measured and degradation products have been identified. Excellent degradation of PLA films has been achieved with enzyme cocktail containing commercial alkaline proteases and lipases of up to 90% weight loss. For the first time, we also report valorization of PLA into bacterial nanocellulose after enzymatic hydrolysis of the samples.

A comprehensive review on polylactic acid (PLA) - Synthesis, processing and application in food packaging

Plastics play an essential role in food packaging; their primary function is to preserve the nature of the food, ensure adequate shelf life and ensure food safety. Plastics are being produced on a global scale in excess of 320 million tonnes annually, with demand rising to reflect the material in wide range of applications. Nowadays, the packaging industry is a significant consumer of synthetic plastic made from fossil fuels. Petrochemical-based plastics are regarded as the preferred material for packaging. Nonetheless, using these plastics in large quantities results in a long-standing environment. Environmental pollution and the depletion of fossil fuels have prompted researchers and manufacturers to develop eco-friendly biodegradable polymers to replace petrochemical-based polymers. As a result, the production of eco-friendly food packaging material has sparked increased interest as a viable alternative to petrochemical-based polymers. Polylactic acid (PLA) is one of the compostable thermoplastic biopolymers that is biodegradable and renewable in nature. High-molecular-weight PLA can be used to produce fibres, flexible, non-wovens, hard and durable materials (100,000 Da or even higher).The chapter focuses on food packaging techniques, food industry waste, biopolymers, their classification, PLA synthesis, the importance of PLA properties for food packaging, and technologies used to process PLA in food packaging.