Preparation of carbon-coated Fe2 O3 @Ti3 C2 Tx composites by mussel-like modifications as high-performance anodes for lithium-ion batteries

Fe2 O3 with high theoretical capacity (1007 mA h g-1 ) and low cost is a potential anode material for lithium-ion batteries (LIBs), but its practical application is restricted by its low electrical conductivity and large volume changes during lithiation/delithiation. To solve these problems, Fe2 O3 @Ti3 C2 Tx composites were synthesized by a mussel-like modification method, which relies on the self-polymerization of dopamine under mild conditions. During polymerization, the electronegative group (-OH) on dopamine can easily coordinate with Fe3+ ions as well as form hydrogen bonds with the -OH terminal group on the surface of Ti3 C2 Tx , which induces a uniform distribution of Fe2 O3 on the Ti3 C2 Tx surface and mitigates self-accumulation of MXene nanosheets. In addition, the polydopamine-derived carbon layer protects Ti3 C2 Tx from oxidation during the hydrothermal process, which can further improve the electrical conductivity of the composites and buffer the volume expansion and particle agglomeration of Fe2 O3 . As a result, Fe2 O3 @Ti3 C2 Tx anodes exhibit ~100 % capacity retention with almost no capacity loss at 0.5 A g-1 after 250 cycles, and a stable capacity of 430 mA h g-1 at 2 A g-1 after 500 cycles. The unique structural design of this work provides new ideas for the development of MXene-based composites in energy storage applications.

Hematite (α-Fe2O3) with Oxygen Defects: The Effect of Heating Rate for Photocatalytic Performance

Hematite (α-Fe2O3) emerges as an enticing material for visible-light-driven photocatalysis owing to its remarkable stability, low toxicity, and abundance. However, its inherent shortcomings, such as a short hole diffusion length and high recombination rate, hinder its practical application. Recently, oxygen vacancies (Vo) within hematite have been demonstrated to modulate its photocatalytic attributes. The effects of Vo can be broadly categorized into two opposing aspects: (1) acting as electron donors, enhancing carrier conductivity, and improving photocatalytic performance and (2) acting as surface carrier traps, accelerating excited carrier recombination, and deteriorating performance. Critically, the generation rate, distribution, role, and behavior of Vo significantly differ for synthesis methods due to differences in formation mechanisms and oxygen diffusion. This complexity hampers simplified discussions of Vo, necessitating careful investigation and nuanced discussion tailored to the specific method and conditions employed. Among various approaches, hydrothermal synthesis offers a simple and cost-effective route. Here, we demonstrate a hydrothermal synthesis method for Vo introduction to hematite using a carbon source, where variations in the heating rate have not been previously explored in terms of their influence on Vo generation. The analyses revealed that the concentration of Vo was maximized at a heating rate of 16 °C/min, indicative of a high density of surface defects. With regard to photocatalytic performance, elevated heating rates (16 °C/min) fostered the formation of Vo primarily on the hematite surface. The photocatalytic activity was 7.1 times greater than that of the sample prepared at a low heating rate (2 °C/min). These findings highlight the crucial role of surface defects, as opposed to bulk defects, in promoting hematite photocatalysis. Furthermore, the facile control over Vo concentration achievable via manipulating the heating rate underscores the promising potential of this approach for optimizing hematite photocatalysts.

In situconstruction of N-doped Ti3C2Txconfined worm-like Fe2O3nanoparticles by Fe-O-Ti bonding for LIBs anode with superior cycle performance

The development of Fe2O3as lithium-ion batteries (LIBs) anode is greatly restricted by its poor electronic conductivity and structural stability. To solve these issues, this work presentsin situconstruction of three-dimensional crumpled Fe2O3@N-Ti3C2Txcomposite by solvothermal-freeze-drying process, in which wormlike Fe2O3nanoparticles (10-50 nm)in situnucleated and grew on the surface of N-doped Ti3C2Txnanosheets with Fe-O-Ti bonding. As a conductive matrix, N-doping endows Ti3C2Txwith more active sites and higher electron transfer efficiency. Meanwhile, Fe-O-Ti bonding enhances the stability of the Fe2O3/N-Ti3C2Txinterface and also acts as a pathway for electron transmission. With a large specific surface area (114.72 m2g-1), the three-dimensional crumpled structure of Fe2O3@N-Ti3C2Txfacilitates the charge diffusion kinetics and enables easier exposure of the active sites. Consequently, Fe2O3@N-Ti3C2Txcomposite exhibits outstanding electrochemical performance as anode for LIBs, a reversible capacity of 870.2 mAh g-1after 500 cycles at 0.5 A g-1, 1129 mAh g-1after 280 cycles at 0.2 A g-1and 777.6 mAh g-1after 330 cycles at 1 A g-1.

Highly Efficient Photo-Fenton Ag/Fe2O3/BiOI Z-Scheme Heterojunction for the Promoted Degradation of Tetracycline

Novel Ag/Fe₂O₃/BiOI Z-scheme heterostructures are first fabricated through a facile hydrothermal method. The composition and properties of as-synthesized Ag/Fe₂O₃/BiOI nanocomposites are characterized by powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, UV-Vis diffuse reflectance spectra, etc. The Ag/Fe₂O₃/BiOI systems exhibit remarkable degradation performance for tetracycline (TC). In particular, the composite (Ag/Fe₂O₃/BiOI-2) shows the highest efficiency when the contents of Ag and α-Fe₂O₃ are 2 wt% and 15%, respectively. The effects of operating parameters, including the solution pH, H₂O₂ concentration, TC concentration, and catalyst concentration, on the degradation efficiency are investigated. The photo-Fenton mechanism is studied, and the results indicated that •O^2- is the main active specie for TC degradation. The enhanced performance of Ag/Fe₂O₃/BiOI heterostructures may be ascribed to the synergic effect between photocatalysis and the Fenton reaction. The formation of Ag/Fe₂O₃/BiOI heterojunction is beneficial to the transfer and separation of charge carriers. The photo-generated electrons accelerate the Fe²⁺/Fe³⁺ cycle and create the reductive reaction of H₂O₂. This research reveals that the Ag/Fe₂O₃/BiOI composite possesses great potential in wastewater treatment.

Influence of Varying Concentrations of Epoxy, Rice Husk, Al2O3, and Fe2O3 on the Properties of Brake Friction Materials Prepared Using Hand Layup Method

Brake friction materials (BFMs) have a critical role in ensuring the safety as well as the reliability of automotive braking systems. However, traditional BFMs, typically made from asbestos, are associated with environmental and health concerns. Therefore, this results in a growing interest in developing alternative BFMs that are eco-friendly, sustainable, and cost-effective. This study investigates the effect of varying concentrations of epoxy, rice husk, alumina (Al₂O₃), and iron oxide (Fe₂O₃) on the mechanical and thermal properties of BFMs prepared using the hand layup method. In this study, the rice husk, Al₂O₃, and Fe₂O₃ were filtered through a 200-mesh sieve. Note that the BFMs were fabricated using different combinations and concentrations of the materials. Their mechanical properties, such as density, hardness, flexural strength, wear resistance, and thermal properties, were investigated. The results suggest that the concentrations of the ingredients significantly influence the mechanical and thermal properties of the BFMs. A specimen made from epoxy, rice husk, Al₂O₃, and Fe₂O₃ with concentrations of 50 wt.%, 20 wt.%, 15 wt.%, and 15 wt.%, respectively, produced the best properties for BFMs. On the other hand, the density, hardness, flexural strength, flexural modulus, and wear rate values of this specimen were 1.23 g/cm³, 81.2 Vickers (HV), 57.24 MPa, 4.08 GPa, and 8.665 × 10^-7 mm²/kg. In addition, this specimen had better thermal properties than the other specimens. These findings provide valuable insights into developing eco-friendly and sustainable BFMs with suitable performance for automotive applications.

Hematite: A Good Catalyst for the Thermal Decomposition of Energetic Materials and the Application in Nano-Thermite

Metal oxides (MOs) are of great importance in catalysts, sensor, capacitor and water treatment. Nano-sized MOs have attracted much more attention because of the unique properties, such as surface effect, small size effect and quantum size effect, etc. Hematite, an especially important additive as combustion catalysts, can greatly speed up the thermal decomposition process of energetic materials (EMs) and enhance the combustion performance of propellants. This review concludes the catalytic effect of hematite with different morphology on some EMs such as ammonium perchlorate (AP), cyclotrimethylenetrinitramine (RDX), cyclotetramethylenete-tranitramine (HMX), etc. The method for enhancing the catalytic effect on EMs using hematite-based materials such as perovskite and spinel ferrite materials, making composites with different carbon materials and assembling super-thermite is concluded and their catalytic effects on EMs is also discussed. Therefore, the provided information is helpful for the design, preparation and application of catalysts for EMs.

Utilization of gasification slag and petrochemical incineration fly ash for glass ceramic production

This study investigated glass ceramics produced using coal gasification slag (CGS) and petrochemical incineration fly ash (PIFA) to immobilize hazardous heavy metals such as Cr and As. However, the crystallization kinetics and stabilization behavior mechanism of different heavy metals in the petrochemical incineration fly ash-derived glass-ceramics remains unclear. And X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, and inductively coupled plasma mass spectrometry were used to characterize glass and crystalline products. In this paper, we reported the crystallization kinetics and chemical leaching characteristics of the glass ceramic. A low crystallization activation energy of 121.49 kJ/mol was achieved from crystallization peak of several different heating rates around 850°C, implying that it is easier to produce the glass ceramics at that temperature. The Avrami parameter of the former crystallization was determined to be 1.23 ± .12, which indicated two-dimensional crystal growth with heterogeneous nucleation. The toxicity characteristic leaching procedure results indicated that the heavy metals were well solidified, and that the leaching concentration was significantly lower than the limit specified by governmental agencies. The potentially toxic element index of the parent glass and the two glass ceramics were 11.7, 5.8, and 3.6, respectively. Therefore, the conversion of hazardous petrochemical incineration fly ash and other solid waste into environmentally friendly glass ceramics shows considerable potential and reliability.

Metal Oxide Wrapped by Reduced Graphene Oxide Nanocomposites as Anode Materials for Lithium-Ion Batteries

The reduced graphene oxide/iron oxide (rGO/Fe₂O₃) and reduced graphene oxide/cobalt oxide (rGO/Co₃O₄) composite anodes have been successfully prepared through a simple and scalable ball-milling synthesis. The substantial interaction of Fe₂O₃ and Co₃O₄ with the rGO matrix strengthens the electronic conductivity and limits the volume variation during cycling in the rGO/Fe₂O₃ and rGO/Co₃O₄ composites because reduced graphene oxide (rGO) helps the metal oxides (MOs) to attain a more efficient diffusion of Li-ions and leads to high specific capacities. As anode materials for LIBs, the rGO/Fe₂O₃ and rGO/Co₃O₄ composites demonstrate overall superb electrochemical properties, especially rGO/Fe₂O₃T-5 and rGO/Co₃O₄T-5, showcasing higher reversible capacities of 1021 and 773 mAhg^-1 after 100 cycles at 100 mAg^-1, accompanied by the significant rate performance. Because of their superior electrochemical efficiency, high capacity and low cost, the rGO/Fe₂O₃ and rGO/Co₃O₄ composites made by ball milling could be outstanding anode materials for LIBs. Due to the excellent electrochemical performance, the rGO/Fe₂O₃ and rGO/Co₃O₄ composites prepared via ball milling could be promising anode materials with a high capacity and low cost for LIBs. The findings may provide shed some light on how other metal oxides wrapped by rGO can be prepared for future applications.

Scallop shell coated Fe2O3 nanocomposite as an eco-friendly adsorbent for tetracycline removal

ABSTRACTThe present study focused on the usability of scallop shell coated Fe₂O₃ nanoparticles as an eco-friendly new absorbent in the treatment of tetracycline (TC). The process performance in terms of TC removal was investigated at different operating conditions, i.e. at solution pH of 3-11, Fe₂O₃-scallop dosage of 0.4-2.4 g L^-1, initial TC content of 20-120 mg L^-1 and temperature of 25-55°C. Solution pH of 7 yielded the highest TC removal efficiency (99%). At this pH value, almost complete TC removal was achieved at a Fe₂O₃-scallop shell nanocomposite dose of 1.6 g L^-1 and 25°C. The responsible TC removal mechanism is suggested as the non-electrical π-π dispersion interaction between the bulk π system on the absorbent surface and TC molecules bearing both benzene rings and double bonds at this solution pH. TC removal efficiency appreciably enhanced up to the Fe₂O₃-scallop dosage of 1.6 g L^-1 being an optimum. Adsorption rate was found to be fast at lower initial TC concentrations than 40 mg L^-1. The effect of temperature on TC removal efficiency was insignificant. Adsorption followed the pseudo-second-order kinetic model. Experimental data perfectly fitted by the Langmuir equation. The maximum adsorption capacity was calculated as 49.26 mg g^-1. Thermodynamic analysis demonstrated that adsorption process was spontaneous process and endothermic. The results obtained from the present study proved the excellent performance of scallop shell coated Fe₂O₃ nanoparticles as an eco-friendly adsorbent in TC treatment.

Boosting Electrocatalytic Ammonia Synthesis of Bio-Inspired Porous Mo-Doped Hematite via Nitrogen Activation

Electrochemical N₂ reduction reaction (NRR) emerges as a highly attractive alternative to the Haber-Bosch process for producing ammonia (NH₃) under ambient circumstances. Currently, this technology still faces tremendous challenges due to the low ammonia production rate and low Faradaic efficiency, urgently prompting researchers to explore highly efficient electrocatalysts. Inspired by the Fe-Mo cofactor in nitrogenase, we report Mo-doped hematite (Fe₂O₃) porous nanospheres containing Fe-O-Mo subunits for enhanced activity and selectivity in the electrochemical reduction from N₂ to NH₃. Mo-doping induces the morphology change from a solid sphere to a porous sphere and enriches lattice defects, creating more active sites. It also regulates the electronic structures of Fe₂O₃ to accelerate charge transfer and enhance the intrinsic activity. As a consequence, Mo-doped Fe₂O₃ achieves effective N₂ fixation with a high ammonia production rate of 21.3 ± 1.1 μg h^-1 mg_cat.^-1 as well as a prominent Faradaic efficiency (FE) of 11.2 ± 0.6%, superior to the undoped Fe₂O₃ and other iron oxide catalysts. Density functional theory (DFT) calculations further unravel that the Mo-doping in Fe₂O₃ (110) narrows the band gap, promotes the N₂ activation on the Mo site with an elongated N≡N bond length of 1.132 Å in the end-on configuration, and optimizes an associative distal pathway with a decreased energy barrier. Our results may pave the way toward enhancing the electrocatalytic NRR performance of iron-based materials by atomic-scale heteroatom doping.

Fe2O3/Porous Carbon Composite Derived from Oily Sludge Waste as an Advanced Anode Material for Supercapacitor Application

It is urgent to improve the electrochemical performance of anode for supercapacitors. Herein, we successfully prepare Fe₂O₃/porous carbon composite materials (FPC) through hydrothermal strategies by using oily sludge waste. The hierarchical porous carbon (HPC) substrate and fine loading of Fe₂O₃ nanorods are all important for the electrochemical performance. The HPC substrate could not only promote the surface capacitance effect but also improve the utilization efficiency of Fe₂O₃ to enhance the pseudo-capacitance. The smaller and uniform Fe₂O₃ loading is also beneficial to optimize the pore structure of the electrode and enlarge the interface for faradaic reactions. The as-prepared FPC shows a high specific capacitance of 465 F g^-1 at 0.5 A g^-1, good rate capability of 66.5% retention at 20 A g^-1, and long cycling stability of 88.4% retention at 5 A g^-1 after 4000 cycles. In addition, an asymmetric supercapacitor device (ASC) constructed with FPC as the anode and MnO₂/porous carbon composite (MPC) as the cathode shows an excellent power density of 72.3 W h kg^-1 at the corresponding power density of 500 W kg^-1 with long-term cycling stability. Owing to the outstanding electrochemical characteristics and cycling performance, the associated materials' design concept from oily sludge waste has large potential in energy storage applications and environmental protection.

Fe2O3nanoparticles anchored on thermally oxidized MWCNTs as anode material for lithium-ion battery

Thermally oxidized MWCNTs (OMWCNTs) are fabricated by a thermal treatment of MWCNTs at 500 °C for 3 h in an oxygen-containing atmosphere. The oxygen content of OMWCNTs increases from 1.9 wt% for MWCNTs to 8.3 wt%. And the BET specific surface area of OMWCNTs enhances from 254.2 m²g^-1for MWCNTs to 496.1 m²g^-1. The Fe₂O₃/OMWCNTs nanocomposite is prepared by a hydrothermal method. Electrochemical measurements show that Fe₂O₃/OMWCNTs still keeps a highly reversible specific capacity of 653.6 mA h g^-1after 200 cycles at 0.5 A g^-1, which shows an obviously higher capacity than the sum of that of single Fe₂O₃and OMWCNTs. The OMWCNTs not only buffer the volume changes of Fe₂O₃nanoparticles but also provide high-speed electronic transmission channels in the charge-discharge process. The thermal oxidation method of OMWCNTs avoids using strong corrosive acids such as nitric acid and sulfuric acid, which has the advantages of safety, environmental protection, macroscopic preparation, etc.

Synthesis, Characterization and Photocatalytic Activity of CoFe2O4/Fe2O3 Dispersed in Mesoporous KIT-6

The present work aimed to synthesize and characterize a solid based on CoFe₂O₄/Fe₂O₃-KIT-6 and evaluate its performance in the photocatalytic degradation of the remazol red ultra RGB dye. By analyzing XRD, N₂ physisorption, and Mössbauer results, it was possible to identify that the desired CoFe₂O₄/Fe₂O₃ phase was achieved, which maintained its structural properties. The FTIR-pyridine indicated the presence of Lewis acid sites, while TPD-CO₂ showed a large amount of weak basic sites. The band-gap energy indicated that the compound can be applied in photocatalytic degradation under UV/visible light, with the possibility of magnetic separation at the end of the reaction. The photocatalysis results indicated that there was complete degradation of the remazol red ultra RGB dye within 1 h of reaction. Despite the absence of H₂O₂, the combination of the proposed photocatalyst with the anatase phase (TiO₂) showed significant improvements in the degradation process. The proposed mechanism for complete dye degradation indicated that a sequence of radical reactions is necessary, generating oxidant species such as •OH and the final products were CO₂ and H₂O.

Influence of Fe2O3, MgO and Molarity of NaOH Solution on the Mechanical Properties of Fly Ash-Based Geopolymers

The use of waste from industrial activities is of particular importance for environmental protection. Fly ash has a high potential in the production of construction materials. In the present study, the use of fly ash in the production of geopolymer paste and the effect of Fe₂O₃, MgO and molarity of NaOH solution on the mechanical strength of geopolymer paste are presented. Samples resulting from the heat treatment of the geopolymer paste were subjected to mechanical tests and SEM, EDS and XRD analyses. Samples were obtained using 6 molar and 8 molar NaOH solution with and without the addition of Fe₂O₃ and MgO. Samples obtained using a 6 molar NaOH solution where Fe₂O₃ and MgO were added had higher mechanical strengths compared to the other samples.

The role of iron nanoparticles on morpho-physiological traits and genes expression (IRT1 and CAT) in rue (Ruta graveolens)

The iron nanoparticles with different physic-chemical properties induce inconsistent effects on various studied plant species. Thus, the effect of ferric oxide (Fe₂O₃) nanoparticles was compared with Fe₂O₃ microparticles and FeSO₄complexes of EDTA for major physiological and gene expression in Rue (Ruta graveolens). Iron root content increased as Fe-MPs + EDTA ˂˂ Fe-NPs + EDTA˂ FeSO₄ + EDTA. The shoot's iron remained unchanged or slightly increased under most of FeSO₄ and Fe-MPs + EDTA treatments. Under Fe-NPs + EDTA treatment, 50 and 250 µM concentration decreased on shoot iron by 23.2% and 19.4% compared to control, respectively. But the shoot iron at 500 µM NPs was 28.2% higher than that of the control. A 46-58 fold lower Fe translocation was observed under Fe-NPs + EDTA than Fe-MPs + EDTA. The effect of Fe-NPs + EDTA was more significant on plant fresh and dry mass than the control. All treatments showed an increase in anthocyanin by 19-84% in leaves compared to the control. The Fe-NPs + EDTA and MPs + EDTA induced similar effects on enhanced growth parameters, total chlorophyll, catalase enzyme activity, gene, and reduced chlorophyll a/b and oxidants. Catalase enzyme activity in FeSO₄ and MPs + EDTA was similar, and in Fe-NPs + EDTA treatments were influenced by coarse and fine regulation mechanisms, respectively. Iron MPs + EDTA had a more negative effect on IRT₁ relative gene expression in roots as compared to other iron forms. The IRT₁ relative gene expression in shoots was positively affected by 31-81% under all treatment types (except control and 250 µM Fe-NPs + EDTA, and 250 µM MPs + EDTA). These results could reveal the potential mechanism of plant response to nanoparticles.

Scavenger-Supported Photocatalytic Evidence of an Extended Type I Electronic Structure of the TiO2@Fe2O3 Interface

Heterostructures of TiO₂@Fe₂O₃ with a specific electronic structure and morphology enable us to control the interfacial charge transport necessary for their efficient photocatalytic performance. In spite of the extensive research, there still remains a profound ambiguity as far as the band alignment at the interface of TiO₂@Fe₂O₃ is concerned. In this work, the extended type I heterojunction between anatase TiO₂ nanocrystals and α-Fe₂O₃ hematite nanograins is proposed. Experimental evidence supporting this conclusion is based on direct measurements such as optical spectroscopy, X-ray photoemission spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy (HRTEM), and the results of indirect studies of photocatalytic decomposition of rhodamine B (RhB) with selected scavengers of various active species of OH^•, h^•, e^-, and ^•O₂^-. The presence of small 6-8 nm Fe₂O₃ crystallites at the surface of TiO₂ has been confirmed in HRTEM images. Irregular 15-50 nm needle-like hematite grains could be observed in scanning electron micrographs. Substitutional incorporation of Fe³⁺ ions into the TiO₂ crystal lattice is predicted by a 0.16% decrease in lattice parameter a and a 0.08% change of c, as well as by a shift of the Raman E_g(1) peak from 143 cm^-1 in pure TiO₂ to 149 cm^-1 in Fe₂O₃-modified TiO₂. Analysis of O 1s XPS spectra corroborates this conclusion, indicating the formation of oxygen vacancies at the surface of titanium(IV) oxide. The presence of the Fe³⁺ impurity level in the forbidden band gap of TiO₂ is revealed by the 2.80 eV optical transition. The size effect is responsible for the absorption feature appearing at 2.48 eV. Increased photocatalytic activity within the visible range suggests that the electron transfer involves high energy levels of Fe₂O₃. Well-programed experiments with scavengers allow us to eliminate the less probable mechanisms of RhB photodecomposition and propose a band diagram of the TiO₂@Fe₂O₃ heterojunction.

Fabrication and application of Fe2O3-decorated carbon nanotube fibers via instantaneous Joule-heating method

Fe₂O₃-decorated carbon nanotube fibers (Fe₂O₃/CNT fibers) exhibit synergistic properties and can be used in flexible electrochemical devices. One of the greatest challenges is to synthesize homogeneous Fe₂O₃on CNT fibers. In this paper, we have anchored Fe₂O₃nanocrystals compactly and uniformly in CNT fibers via the instantaneous Joule-heating method. By regulating the current intensity, iron catalysts in CNT fibers can be directly converted into Fe₂O₃nanocrystals. This method can also prepare Fe₂O₃particles of different sizes by adjusting the current value. The distinct structure of Fe₂O₃/CNT fibers contributed to their excellent electrochemical performance. Because cobaltocene and nickelocene can also be used as catalysts to prepare CNT fibers, this method is expected to be a universal method for the composite of transition metal oxide and CNT fibers.

Morphological, microstructural and photocatalytic characterization of undoped and Ni, Co doped Fe2O3 particles synthesized by sonochemical method

In this study, an abundant and eco-friendly photocatalytic material, Fe2O3 particles were synthesized by sonochemical method. Morphological and microstructural investigations of synthesized undoped and Ni, Co-doped Fe2O3 particles were performed. The effect of particle morphology and microstructure on its photocatalytic performance was further investigated. Comparative studies for evaluating particle crystallite sizes were conducted by Williamson-Hall (W-H) method and modified Debye-Scherrer (MDS). Crystallite sizes and lattice strains of Fe2O3 induced by process parameters were calculated by W-H method based on uniform deformation model (UDM). The crystallite sizes of the synthesized powders were calculated in the range of 200 nm and 76 nm by Williamson-Hall analysis. In addition to structural investigation, dislocation density of the synthesized particles was calculated by Williamson-Smallman relation. Afterwards, photocatalytic performance of Fe2O3 particles was investigated in detail. The photodegradation of methylene blue solutions in the presence of light in 20 min with samples 3,4, and 5 in 20 min were 0.937, 0.896, and 0.855, respectively. Moreover, the photodegradation of methylene blue solution with sample 5 for 15, 30, and 45 min were 0.9, 0.828, and 0.757, respectively. A photocatalytic activity of 24.25% has been observed under optimum conditions for the time interval of 45 min.

Single-Atom Ce-Modified α-Fe2O3 for Selective Catalytic Reduction of NO with NH3

A single-atom Ce-modified α-Fe₂O₃ catalyst (Fe_0.93Ce_0.07O_x catalyst with 7% atomic percentage of Ce) was synthesized by a citric acid-assisted sol-gel method, which exhibited excellent performance for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) over a wide operating temperature window. Remarkably, it maintained ∼93% NO conversion efficiency for 168 h in the presence of 200 ppm SO₂ and 5 vol % H₂O at 250 °C. The structural characterizations suggested that the introduction of Ce leads to the generation of local Fe-O-Ce sites in the FeO_x matrix. Furthermore, it is critical to maintain the atomic dispersion of the Ce species to maximize the amounts of Fe-O-Ce sites in the Ce-doped FeO_x catalyst. The formation of CeO₂ nanoparticles due to a high doping amount of Ce species leads to a decline in catalytic performance, indicating a size-dependent catalytic behavior. Density functional theory (DFT) calculation results indicate that the formation of oxygen vacancies in the Fe-O-Ce sites is more favorable than that in the Fe-O-Fe sites in the Ce-free α-Fe₂O₃ catalyst. The Fe-O-Ce sites can promote the oxidation of NO to NO₂ on the Fe_0.93Ce_0.07O_x catalyst and further facilitate the reduction of NO_x by NH₃. In addition, the decomposition of NH₄HSO₄ can occur at lower temperatures on the Fe_0.93Ce_0.07O_x catalyst containing atomically dispersed Ce species than on the α-Fe₂O₃ reference catalyst, resulting in the good SO₂/H₂O resistance ability in the NH₃-SCR reaction.

A dimethyl disulfide gas sensor based on nanosized Pt-loaded tetrakaidecahedralα-Fe2O3nanocrystals

Surface modification by employing precious metals is one of the most effective ways to improve the gas-sensing performance of metal oxide semiconductors. Pureα-Fe₂O₃nanoparticles and Pt-modifiedα-Fe₂O₃nanoparticles were prepared sequentially using a rather simple hydrothermal synthesis and impregnation method. Compared with the originalα-Fe₂O₃nanomaterials, the Pt-α-Fe₂O₃nanocomposite sensor shows a higher response value (R_a/R_g = 58.6) and a shorter response/recovery time (1 s/168 s) to 100 ppm dimethyl disulfide (DMDS) gas at 375 °C. In addition, it has better selectivity to DMDS gas with the value of more than 9 times higher than the other target gases at 375 °C. This study indicates that the Pt-α-Fe₂O₃nanoparticle sensor has good prospects and can be used as a low-cost and effective DMDS gas sensor.

Mechanisms of NO2 Detection in Hybrid Structures Containing Reduced Graphene Oxide: A Review

The sensitive detection of harmful gases, in particular nitrogen dioxide, is very important for our health and environment protection. Therefore, many papers on sensor materials used for NO₂ detection have been published in recent years. Materials based on graphene and reduced graphene oxide deserve special attention, as they exhibit excellent sensor properties compared to the other materials. In this paper, we present the most recent advances in rGO hybrid materials developed for NO₂ detection. We discuss their properties and, in particular, the mechanism of their interaction with NO₂. We also present current problems occuring in this field.

Improved neural differentiation of human-induced pluripotent stem cell(hiPSCs) on a novel polyurethane-based scaffold containing iron oxide nanoparticles (Fe2O3 NPs)

BACKGROUND

Repair of the nervous system in humans has always been complicated and faced difficulties. Cell transplantation approaches using biocompatible scaffolds might be an attractive therapeutic strategy for neuronal regeneration.

OBJECTIVE

We designed a cell delivery platform based on polyurethane [PU] and modified it with iron oxide nanoparticles [Fe2O3 NPs] for neural induction of human-induced pluripotent stem cells [hiPSC]. Forskolin, IBMX, and different ratios of FBS were employed to induce neurogenesis of hiPSCs. Neural differentiations were assessed at the level of genes and proteins.

METHOD

As was shown by MTT colorimetric assay, the proliferation and viability of SNL 76/7 on PU/ Fe2O3 were superior in comparison with pure PU and Fe2O3. hiPSCs cultured with PU/Fe2O3 exhibited an elevated expression of β3-tubulin, MAP2, NSE, OLIG2, as compared to controls. Furthermore, Acridine Orange staining assured the survival and viability of hiPSCs after 14 days of differentiation.

RESULT

All in all, our findings pointed out the biocompatibility and positive regulatory effect of PU/Fe2O3 on neural markers.

CONCLUSION

We believe this scaffold could be a potential candidate for future nerve differentiation applications.

Acaricidal Potential and Ecotoxicity of Metallic Nano-Pesticides Used against the Major Life Stages of Hyalomma Ticks

Ticks (Acari: Ixodidae) are blood-feeding parasites capable of transmitting diseases to animals (Piroplasmosis) and humans (Congo fever, Lyme disease). The non-judicious use of chemical acaricides has led to the development of acaricide-resistant ticks, making the control of ticks and tick-borne diseases difficult. This study reports the efficacy of magnesium oxide (MgO), iron oxide (Fe₂O₃), and zinc oxide (ZnO) nanoparticles (NPs) as alternatives to traditional acaricides/pesticides using in vitro tests against major representative stages of Hyalomma ticks. Nanopesticides were chemically synthesized as rods (Fe₂O₃), stars (ZnO), and spheres (MgO) and were characterized by XRD and SEM analysis. The in vitro bioassays included adult immersion, larval immersion, and larval packet tests. Non-target effects of the nanopesticides were evaluated using snails. The LC₉₀ values of Fe₂O₃ NPs (4.21, 2.83, 0.89 mg/L) were lowest followed by MgO (4.27, 2.91, 0.93 mg/L) and ZnO (4.49, 3.05, 0.69 mg/L), for the tick adult, larval and egg stages, respectively. Fe₂O₃ NPs were capable of arresting oviposition and larval hatching in the study ticks in vitro. The snail toxicity experiments revealed minimum to mild off-target effects for all nanopesticides tested. This study is the first to report the comparative efficacy of magnesium, iron, and zinc nanomaterials for toxicity in egg, adult and larval stages of Hyalomma ticks. Further studies of NPs on establishing the efficacy against ticks and safety at host-human-environment interface could lead to promising nanopesticde applications.

Multiferroic behavior of the functionalized surface of a flexible substrate by deposition of Bi2 O3 and Fe2 O3

Thin films of bismuth and iron oxides were obtained by atomic layer deposition (ALD) on the surface of a flexible substrate poly(4,4'-oxydiphenylene-pyromellitimide) (Kapton) at a temperature of 250°C. The layer thickness was 50 nm. The samples were examined by secondary-ion mass spectrometry, and uniform distribution of elements in the film layer was observed. Surface morphology, electrical polarization, and mechanical properties were investigated by atomic force microscope, piezoelectric force microscopy, and force modulation microscopy. The values of current in the near-surface layer varied in the range of ±80 pA when a potential of 5 V was applied. Chemical analysis was performed by X-ray photoelectron spectroscopy, where the formation of Bi₂ O₃ and Fe₂ O₃ phases, as well as intermediate phases in the Bi-Fe-O system, was observed. Magnetic measurements were carried out by a vibrating sample magnetometer that showed a ferromagnetic response. The low-temperature method of functionalization of the Kapton surface with bismuth and iron oxides will make it possible to adapt the Bi-Fe-O system to flexible electronics.

1D NiO-3D Fe2O3mixed dimensional heterostructure for fast response flexible broadband photodetector

Conventional heterojunction photodetectors rely on planar junction architecture which suffer from low interfacial contact area, inferior light absorption characteristics and complex fabrication schemes. Heterojunctions based on mixed dimensional nanostructures such as 0D-1D, 1D-2D, 1D-3D etc have recently garnered exceptional research interest owing to their atomically sharp interfaces, tunable junction properties such as enhanced light absorption cross-section. In this work, a flexible broadband UV-vis photodetector employing mixed dimensional heterostructure of 1D NiO nanofibers and 3D Fe₂O₃nanoparticles is fabricated. NiO nanofibers were synthesized via economical and scalable electro-spinning technique and made composite with Fe₂O₃nanoclusters for hetero-structure fabrication. The optical absorption spectra of NiO nanofibers and Fe₂O₃nanoparticles exhibit peak absorption in UV and visible spectra, respectively. The as-fabricated photodetector displays quick response times of 0.09 s and 0.18 s and responsivities of 5.7 mA W^-1(0.03 mW cm^-2) and 5.2 mA W^-1(0.01 mW cm^-2) for UV and visible spectra, respectively. The fabricated NiO-Fe₂O₃device also exhibits excellent detectivity in the order of 10¹²jones. The superior performance of the device is ascribed to the type-II heterojunction between NiO-Fe₂O₃nanostructures, which results in the localized built-in potential at their interface, that aids in the effective carrier separation and transportation. Further, the flexible photodetector displays excellent robustness when bent over ∼1000 cycles thereby proving its potential towards developing reliable, diverse functional opto-electronic devices.

Controlled Band Offsets in Ultrathin Hematite for Enhancing the Photoelectrochemical Water Splitting Performance of Heterostructured Photoanodes

Formation of type II heterojunctions is a promising strategy to enhance the photoelectrochemical performance of water-splitting photoanodes, which has been tremendously studied. However, there have been few studies focusing on the formation of type II heterojunctions depending on the thickness of the overlayer. Here, enhanced photoelectrochemical activities of a Fe₂O₃ film deposited-BiVO₄/WO₃ heterostructure with different thicknesses of the Fe₂O₃ layer have been investigated. The Fe₂O₃ (10 nm)/BiVO₄/WO₃ heterojunction photoanode shows a much higher photocurrent density compared to the Fe₂O₃ (100 nm)/BiVO₄/WO₃ photoanode. The Fe₂O₃ (10 nm)/BiVO₄/WO₃ trilayer heterojunction anodes have sequential type II junctions, while a thick Fe₂O₃ overlayer forms an inverse type II junction between Fe₂O₃ and BiVO₄. Furthermore, the incident-photon-to-current efficiency measured under back-illumination is higher than those measured under front-illumination, demonstrating the importance of the illumination sequence for light absorption and charge transfer and transport. This study shows that the thickness of the oxide overlayer influences the energy band alignment and can be a strategy to improve solar water splitting performance. Based on our findings, we propose a photoanode design strategy for efficient photoelectrochemical water splitting.

Theranostic applications of stimulus-responsive systems based on Fe2O3

According to the interaction of nanoparticles with biological systems, enthusiasm for nanotechnology in biomedical applications has been developed in the past decades. Fe2O3 nanoparticles, as the most stable iron oxide, have special merits that make them useful widely for detecting diseases, therapy, drug delivery, and monitoring the therapeutic process. This review presents the fabrication methods of Fe2O3-based materials and their photocatalytic and magnetic properties. Then, we highlight the application of Fe2O3-based nanoparticles in diagnosis and imaging, different therapy methods, and finally, stimulus-responsive systems, such as pH-responsive, magnetic-responsive, redox-responsive, and enzyme-responsive, with an emphasis on cancer treatment. In addition, the potential of Fe2O3 to combine diagnosis and therapy within a single particle called theranostic agent will be discussed.

Improvement of water resistance by Fe2O3/TiO2 photoelectrocatalysts for formaldehyde removal: experimental and theoretical investigation

TiO2-based photocatalysts are a potential technology for removing indoor formaldehyde (CHOH) owing to their strong photooxidation ability. However, their photooxidation performance is generally weakened when suffering from the competitive adsorption of H2O. In a method inspired by the oxygen evolution reaction (OER) to generate intermediates with hydroxyl radicals on the anode electrode catalysts, an electric field was employed in this research and applied to the photooxidation of CHOH to prevent the competitive adsorption of H2O. Additionally, 0.5-5% Fe2O3 decorated TiO2 was employed to improve the photoelectrocatalytic activity. The influence of an electric field on hydroxyl-radical production was investigated by both density functional theory (DFT) with direct-imposed dipole momentum and photoelectrocatalytic experimental tests. The surface characterization of the photocatalysts, including transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR), was conducted. DFT results show that a positive electric field with a strength of 0.05 Å/V was more favorable to produce hydroxyl on Fe2O3/TiO2(010) than was a negative electric field. Fe2O3 decoration can significantly boost hydroxyl formation, resulting from a decrease in the binding energy between the Fe of Fe2O3 and the oxygen and hydrogen atoms of H2O. The dissociated hydrogen atom of the H2O preferentially remained on the catalysts' surface rather than being released into the gas flow. The experimental results demonstrated that applying 150 V could not directly enhance the photooxidation of CHOH by either TiO2 or Fe2O3/TiO2 but that it could relieve the H2O inhibitory effect by more than 10% on the Fe2O3/TiO2.

Fabrication of 3D hierarchical Fe2O3/SnO2photoanode for enhanced photoelectrochemical performance

Exploring and fabricating a suitable photoanode with high catalytic activity is critical for enhancing photoelectrochemical (PEC) performance. Herein, a novel 3D hierarchical Fe₂O₃/SnO₂photoanode was fabricated by a hydrothermal route, combining with an annealing process. The morphology, crystal structure were studied by scanning electron microscopy, transmission electron microscopy, x-ray photon spectroscopy, and x-ray diffraction, respectively. The results reveal the successful preparation of Fe₂O₃nanothorns on the surface of SnO₂nanosheets. The as-fabricated 3D Fe₂O₃/SnO₂photoanode yields obviously promoted PEC performance with a photocurrent density of approximate 5.85 mA cm^-2, measured in a mixture of Na₂S (0.25 M) and Na₂SO₃(0.35 M) aqueous solution at 1.23 V (versus reversible hydrogen electrode, RHE). This value of photocurrent is about 53 times higher than that of the bare SnO₂photoanode. The obvious improved PEC properties can be attributed to the 3D Fe₂O₃/SnO₂heterostructures that offer outstanding light harvesting ability as well as improved charge transport and separation. These results suggest that exploring a suitable 3D hierarchical photoanode is an effective approach to boost PEC performance.

Preparation of Fe2O3-coated vermiculite composite by hydrophobic agglomeration and its application in As/Cd co-contaminated soil

Exploring an economic and efficient method for simultaneous passivation of As and Cd in soils is of great current significance. In this study, a low-cost composite material, Fe₂O₃-vermiculite (Fe-V), for effectively passivating As/Cd was synthesized successfully based on hydrophobic aggregation method. The reaction products were characterized by XRD, SEM, EDS and FTIR, results showed that Fe₂O₃ was successfully loaded onto the surface of vermiculite by the connection with sodium stearate and employed this composite material to passivate the co-contaminated soil with As/Cd. All the percentage of toxicity reduction (P_d value) was higher than the control group, which indicated the passivation was effective. In soil A (As 45 mg/kg and Cd 6 mg/kg), the P_d of As were higher than 90%, the P_d of Cd were 80-100%. And in soil B (As 80 mg/kg and Cd 10 mg/kg), the P_d of As were more than 84.68%, the P_ds of Cd were about 99%. In the meantime, the application of Fe-V could apparently increase the residual fraction of As and Cd in soil A and soil B. Moreover, the passivation of As and Cd in soils by Fe-V composite materials was a combined physical and chemical action system. This research shows that Fe-V could play a good role in the passivation of As/Cd in different pollution levels of soils.

Experimental study of carbon dioxide absorption by Fe2O3@glutamine/NMP nanofluid

In this study, for the first time, the nanoparticle (NP) of Fe₂O₃@glutamine (C₅H₁₀N₂O₃) was synthesized to improve the Fe₂O₃ properties in absorbing carbon dioxide (CO₂) using the base fluid of hydrous N-methyl-2-pyrrolidone (NMP) solution (50 wt%), as a physically powerful CO₂ absorbent. To do this, several nano-NMP solutions, in different weight percentages of NPs, were first prepared. Then, in a batch setup, the nano-NMP solutions were directly exposed to CO₂ gaseous (at the pressures of 20, 30, and 40 bar) to clarify the effects of the mass percentage of NPs and initial pressure on CO₂ absorption. Results clearly illustrated that Fe₂O₃ nanofluid was not stable more than 0.025 wt%. However, Fe₂O₃@glutamine nanofluid was stable approximately two times more than Fe₂O₃ nanofluid due to the presence of glutamine as a hydrophilic agent in the structure of Fe₂O₃@glutamine. Moreover, in comparison to the base fluid (NMP solution), although Fe₂O₃ increased CO₂ absorption up to 9.14%, Fe₂O₃@glutamine NPs caused the CO₂ absorption to increase up to 19.41%, which can be determined as the chemical reactions of two amino groups in the glutamine structure with CO₂ and also higher stability of Fe₂O₃@glutamine NPs compared to bare Fe₂O₃ NPs. To achieve accurate results, all the mentioned experiments were repeated 5 times. The performance of Fe₂O₃ and Fe₂O₃@glutamine NPs after the fifth trial reduced by less than 3.5%, which reveals that the synthesized NPs had almost stable efficiency throughout their applications.

Genotoxicity of aluminium oxide, iron oxide, and copper nanoparticles in mouse bone marrow cells

The aim of this study was to evaluate the genotoxic effects of Al₂O₃, Fe₂O₃, and Cu nanoparticles with chromosomal aberration (CA), micronucleus (MN), and comet assays on the bone marrow of male BALB/c mice. Three doses of Al₂O₃, Fe₂O₃ (75, 150, and 300 mg/kg), or Cu (5, 10, and 15 mg/kg) nanoparticles were administered to mice through intraperitoneal injection once a day for 14 days and compared with negative control (distilled water) and positive control (mitomycin C and methyl methanesulphonate). Al₂O₃ and Fe₂O₃ did not show genotoxic effects, but Cu nanoparticles induced significant (P<0.05) genotoxicity at the highest concentration compared to negative control. Our findings add to the health risk information of Al₂O₃, Fe₂O₃, and Cu nanoparticles regarding human exposure (occupational and/or through consumer products or medical treatment), and may provide regulatory reference for safe use of these nanoparticles. However, before they can be used safely and released into the environment further chronic in vivo studies are essential.

Solid-State Dispersions of Platinum in the SnO2 and Fe2O3 Nanomaterials

The dispersion of platinum (Pt) on metal oxide supports is important for catalytic and gas sensing applications. In this work, we used mechanochemical dispersion and compatible Fe(II) acetate, Sn(II) acetate and Pt(II) acetylacetonate powders to better disperse Pt in Fe₂O₃ and SnO₂. The dispersion of platinum in SnO₂ is significantly different from the dispersion of Pt over Fe₂O₃. Electron microscopy has shown that the elements Sn, O and Pt are homogeneously dispersed in α-SnO₂ (cassiterite), indicating the formation of a (Pt,Sn)O₂ solid solution. In contrast, platinum is dispersed in α-Fe₂O₃ (hematite) mainly in the form of isolated Pt nanoparticles despite the oxidative conditions during annealing. The size of the dispersed Pt nanoparticles over α-Fe₂O₃ can be controlled by changing the experimental conditions and is set to 2.2, 1.2 and 0.8 nm. The rather different Pt dispersion in α-SnO₂ and α-Fe₂O₃ is due to the fact that Pt⁴⁺ can be stabilized in the α-SnO₂ structure by replacing Sn⁴⁺ with Pt⁴⁺ in the crystal lattice, while the substitution of Fe³⁺ with Pt⁴⁺ is unfavorable and Pt⁴⁺ is mainly expelled from the lattice at the surface of α-Fe₂O₃ to form isolated platinum nanoparticles.

High performance and low power consumption resistive random access memory with Ag/Fe2O3/Pt structure

Due to magnetic field tunability and the abundance of iron in the Earth's crust, iron oxide-based resistive random access memory (RRAM) is considered to be low cost and potential for multi-level storage. However, the relatively high operation voltage (>1 V) and small storage window (<100) limit its application. In this work, the devices with simple Ag/Fe₂O₃/Pt structure exhibit typical bipolar resistive switching with ultralow set voltage (V_set) of 0.16 V, ultralow reset voltage (V_reset) of -0.04 V, high OFF/ON resistance ratio of 10³, excellent cycling endurance more than 10⁴and good retention time longer than 10⁴s. Each major parameter has about an order of magnitude improvement compared to the previous data. The devices demonstrate outstanding stable low power consumption quality. Based on the analysis of the experimental results, a percolation model of silver ion migration was established and confirmed that low operation voltage is attributed to the amorphous oxide layer with large porosity. During electrical testing, the compliance current (I_c) and maximum reset voltage (V_max) can also affect the device performance. This discovery suggests Fe₂O₃memristor has significant potential for application and provides a new idea for the realization of high-performance low-power RRAM.

Tailored Co3O4-Based Nanosystems: Toward Photocatalysts for Air Purification

The adverse effects of NO_x (NO + NO₂) gases on the environment and human health have triggered the development of sustainable photocatalysts for their efficient removal (De-NO_x). In this regard, the present work focuses on supported Co₃O₄-based nanomaterials fabricated via chemical vapor deposition (CVD), assessed for the first time as photocatalysts for sunlight-activated NO oxidation. A proof-of-principle investigation on the possibility of tailoring material performances by heterostructure formation is explored through deposition of SnO₂ or Fe₂O₃ onto Co₃O₄ by radio frequency (RF) sputtering. A comprehensive characterization by complementary analytical tools evidences the formation of high-purity columnar Co₃O₄ arrays with faceted pyramidal tips, conformally covered by very thin SnO₂ and Fe₂O₃ overlayers. Photocatalytic functional tests highlight an appreciable activity for bare Co₃O₄ systems, accompanied by a high selectivity in NO_x conversion to harmless nitrate species. A preliminary evaluation of De-NO_x performances for functionalized systems revealed a direct dependence of the system behavior on the chemical composition, SnO₂/Fe₂O₃ overlayer morphology, and charge transfer events between the single oxide constituents. Taken together, the present results can provide valuable guidelines for the eventual implementation of improved photocatalysts for air purification.

Coating of Wood with Fe2O3-Decorated Carbon Nanotubes by One-Step Combustion for Efficient Solar Steam Generation

As the global water shortage becomes increasingly serious, it is highly imperative to develop efficient, renewable, and large-scale water purification devices. Herein, an efficient solar-driven water purification device of wood coated with Fe₂O₃ nanoparticle-decorated carbon nanotubes (Fe₂O₃/CNT) is fabricated in only a few seconds by one-step combustion of ferric acetylacetonate in an ambient environment. The thin layer of the Fe₂O₃/CNT hybrid coated on the upper surface of the wood serves as a solar-light absorber for converting solar energy to thermal energy, while the thermally insulating wood layer with vertically aligned channels endows the device with rapid water upward transport and localizes the generated heat inside the Fe₂O₃/CNT layer for solar-driven water evaporation. As a result, the wood/Fe₂O₃/CNT device achieves a high water steam generation capability of 1.42 kg m^-2 h^-1 along with an excellent evaporation efficiency of 87.2% under 1 sun irradiation, higher than most of the wood-based solar-driven water evaporation device reported. This device is also efficient in the purification of seawaters and wastewaters. This work demonstrates a rapid and facile methodology for large-scale fabrication of wood/Fe₂O₃/CNT devices for efficient solar-driven water purification.

Terrestrial solar radiation driven photodecomposition of ciprofloxacin in clinical wastewater applying mesostructured iron(III) oxide

Cationic cylindrical polymer brushes based on polybutadiene-block-poly(2-vinylpyridine) were applied as structure-directing agent for mesostructuring Fe₂O₃ nanoparticles into nanotubes. After temperature-controlled template removal, the obtained non-woven catalysts were tested for the photodegradation of ciprofloxacin under terrestrial solar radiation. At a slightly basic pH value, as typically encountered in clinical wastewaters, the mesostructured Fe₂O₃ shows a 4.5 times faster degradation of ciprofloxacin than commercial Aeroxide® TiO₂ P25. Even wide-bandgap ZnO, mesostructured in the same way, is 1.6 times slower. Moreover, the non-woven-like structure of the catalyst allows for easy recovery of the catalyst and operation in a continuous flow reactor. Graphical abstract.

Three-Phase Boundary in Cross-Coupled Micro-Mesoporous Networks Enabling 3D-Printed and Ionogel-Based Quasi-Solid-State Micro-Supercapacitors

The construction of advanced micro-supercapacitors (MSCs) with both wide working-voltage and high energy density is promising but still challenging. In this work, a series of nitrogen-doped, cross-coupled micro-mesoporous carbon-metal networks (N-STC/M_x O_y ) is developed as robust additives to 3D printing inks for MSCs fabrication. Taking the N-STC/Fe₂ O₃ nanocomposite as an example, both experimental results and theoretical simulations reveal that the well-developed hierarchical networks with abundantly decorated ultrafine Fe₂ O₃ nanoparticles not only significantly facilitate the ion adsorption at its three-phase boundaries (Fe₂ O₃ , N-STC, and electrolyte), but also greatly favor ionic diffusion/transport with shortened pathways. Consequently, the as-prepared N-STC/Fe₂ O₃ electrode delivers a high gravimetric capacitance (267 F g^-1 at 2 mV s^-1 ) and outstanding stability in a liquid-electrolyte-based symmetric device, as well as a record-high energy density of 114 Wh kg^-1 for an asymmetric supercapacitor. Particularly, the gravimetric capacitance of the ionogel-based quasi-solid-state MSCs by 3D printing reaches 377 F g^-1 and the device can operate under a wide temperature range (-10 to 60 °C).

The Effect of Laser Re-Solidification on Microstructure and Photo-Electrochemical Properties of Fe-Decorated TiO2 Nanotubes

Fossil fuels became increasingly unpleasant energy source due to their negative impact on the environment; thus, attractiveness of renewable, and especially solar energy, is growing worldwide. Among others, the research is focused on smart combination of simple compounds towards formation of the photoactive materials. Following that, our work concerns the optimized manipulation of laser light coupled with the iron sputtering to transform titania that is mostly UV-active, as well as exhibiting poor oxygen evolution reaction to the material responding to solar light, and that can be further used in water splitting process. The preparation route of the material was based on anodization providing well organized system of nanotubes, while magnetron sputtering ensures formation of thin iron films. The last step covering pulsed laser treatment of 355 nm wavelength significantly changes the material morphology and structure, inducing partial melting and formation of oxygen vacancies in the elementary cell. Depending on the applied fluence, anatase, rutile, and hematite phases were recognized in the final product. The formation of a re-solidified layer on the surface of the nanotubes, in which thickness depends on the laser fluence, was shown by microstructure studies. Although a drastic decrement of light absorption was recorded especially in UV range, laser-annealed samples have shown activity under visible light even 20 times higher than bare titania. Electrochemical analysis has shown that the improvement of photoresponse originates mainly from over an order of magnitude higher charge carrier density as revealed by Mott-Schottky analysis. The results show that intense laser light can modulate the semiconductor properties significantly and can be considered as a promising tool towards activation of initially inactive material for the visible light harvesting.

Amorphous/Crystalline Hetero-Phase TiO2 -Coated α-Fe2 O3 Core-Shell Nanospindles: A High-Performance Artificial Nitrogen Fixation Electrocatalyst

Electrochemical nitrogen fixation techniques have emerged as a promisingly sustainable approach to face the challenge associated with nitrogen activation of ammonia synthesis by the Haber-Bosch process under ambient conditions. Herein, the performance of electrocatalytic nitrogen reduction for the production of α-Fe₂ O₃ nanospindles coated with mesoporous TiO₂ with different crystallinity [denoted as α-Fe₂ O₃ @mTiO₂ -X (X=300, 400, and 500 °C)] were investigated. The as-prepared α-Fe₂ O₃ @mTiO₂ -400 composite exhibits a large NH₃ yield (27.2 μg h^-1  mg_cat. ^-1 ) at -0. 5 V vs. the reversible hydrogen electrode and a high Faradaic efficiency (13.3 %) in 0.1 m Na₂ SO₄ , with excellent electrochemical durability. This work presents a novel avenue for the rational design of efficient unique hetero-phase nanocatalysts toward sustainable electrocatalytic N₂ fixation.

Influence of Desulfurization with Fe2O3 on the Reduction of Nickel Converter Slag

Generally in the nickel converter slag, metals are mainly in the form of sulfides, which are difficult to separate from slag. Although metal oxides in the slag, such as NiO, CoO, and Cu₂O, are easily reduced into metal using carbon, the presence of sulfur inhibits the reduction reaction. In this study, the addition of Fe₂O₃ to nickel converter slag produced desulfurized slag, which enhanced the carbothermal reduction process. Increasing the desulfurization rate promoted the conversion of sulfides into oxides in slag, which significantly increased the activity of NiO, Cu₂O, and Fe₂O₃. However, the residual sulfur content had no significant effect on the activity of FeO and CoO, due to the high initial FeO content and cobalt existing mainly in the form of oxides. The optimum addition of Fe₂O₃ was 15.0 g per 100 g nickel slag, while the desulfurization ratio was 36.84% and the rates of nikel, cobalt and copper recovery were 95.33%, 77.73%, and 73.83%, respectively.

Hydrothermal Synthesis of Hematite Nanoparticles Decorated on Carbon Mesospheres and Their Synergetic Action on the Thermal Decomposition of Nitrocellulose

In this study, carbon mesospheres (CMS) and iron oxide nanoparticles decorated on carbon mesospheres (Fe₂O₃-CMS) were effectively synthesized by a direct and simple hydrothermal approach. α-Fe₂O₃ nanoparticles have been successfully dispersed in situ on a CMS surface. The nanoparticles obtained have been characterized by employing different analytical techniques encompassing Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The produced carbon mesospheres, mostly spherical in shape, exhibited an average size of 334.5 nm, whereas that of Fe₂O₃ supported on CMS is at around 80 nm. The catalytic effect of the nanocatalyst on the thermal behavior of cellulose nitrate (NC) was investigated by utilizing differential scanning calorimetry (DSC). The determination of kinetic parameters has been carried out using four isoconversional kinetic methods based on DSC data obtained at various heating rates. It is demonstrated that Fe₂O₃-CMS have a minor influence on the decomposition temperature of NC, while a noticeable diminution of the activation energy is acquired. In contrast, pure CMS have a slight stabilizing effect with an increase of apparent activation energy. Furthermore, the decomposition reaction mechanism of NC is affected by the introduction of the nano-catalyst. Lastly, we can infer that Fe₂O₃-CMS may be securely employed as an effective catalyst for the thermal decomposition of NC.

The Effect of Temperature and Milling Process on Steel Scale Utilized as a Pigment for Ceramic Glaze

This study is focused on the evaluation of the re-utilizability of scale originated during the steel casting and steel rolling processes as a pigment for glazes. Non-oiled scale with Fe₃O₄ as the major phase were used as a coloring component of transparent glaze matrix in: (i) as received state, (ii) thermally pre-treated at 700 and 900 °C, (iii) mechanically treated in planetary ball mill (60, 120 and 240 min) and (iv) mechanically treated in vibratory disc mill (60 and 120 min). Prepared glazes were applied on the surface of ceramic tiles prepared from a commercially available white ceramic slurry. The resulting tiles with given glaze were thermally treated at 800, 900 and 1060 °C. The pigments were characterized by X-ray powder diffraction method (XRD), X-ray fluorescence spectroscopy (XRF), granulometry (PSD), thermogravimetric analysis (TG) and differential thermal analysis (DTA), scanning electron microscopy (SEM/EDAX). The color of the samples was described by the coordinates L*a*b* from CIELAB color space. The results showed that the non-oiled scale is suitable as the pigment for ceramic glazes. Careful control of the scale treatment process (mechanical as well as thermal) together with the temperature of final glaze firing is necessary to obtain the glaze of desired color and quality.

Boosting Multiple Interfaces by Co-Doped Graphene Quantum Dots for High Efficiency and Durability Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells (PSCs), as the most rapidly developing next-generation thin-film photovoltaic technology, have attracted extensive research interest, yet their efficiency, scalability, and durability remain challenging. α-Fe₂O₃ could be used as an electron transporting layer (ETL) of planar PSCs, which exhibits a much higher humidity and UV light-stability compared to TiO₂-based planar PSCs. However, the photovoltaic conversion efficiency (PCE) of the Fe₂O₃-based device was still below 15% because of poor interface contact between α-Fe₂O₃ and perovskite and poor crystal quality of perovskites. In this work, we have engineered the interfaces throughout the entire solar cell via incorporating N, S co-doped graphene quantum dots (NSGQDs). The NSGQDs played remarkable multifunctional roles: (i) facilitated the perovskite crystal growth; (ii) eased charge extraction at both anode and cathode interfaces; and (iii) induced the defect passivation and suppressed the charge recombination. When assembled with a α-Fe₂O₃ ETL, the planar PSCs exhibited a significantly increased efficiency from 14 to 19.2%, with concomitant reductions in hysteresis, which created a new record of the PCE for Fe₂O₃-based PSCs to date. In addition, PSCs with the entire device interfacial engineering showed an obviously improved durability, including prominent humidity, UV light, and thermal stabilities. Our interfacial engineering methodology via graphene quantum dots represents a versatile and effective way for building high efficiency as well as durable PSCs.

Modification of photocatalytic property of BaTiO3 perovskite structure by Fe2O3 nanoparticles for CO2 reduction in gas phase

In this work, perovskite structure of BaTiO₃ was coupled with Fe₂O₃ in different molar ratios achieving the best photocatalytic performance of CO₂ reduction in the presence of CH₄ as reducing agent; both of them are main greenhouse gases. The photocatalysts were synthesized by facile hydrothermal method. The samples were characterized by XRD, FTIR, FESEM, EDX, UV-Vis DRS, and photoluminescence (PL) analyses. The BaTiO₃ synthesized in this research showed a weak PL signal which is due to the intrinsic ferroelectric property as has been observed in previous reports. Compared to the pure BaTiO₃ and Fe₂O₃, the heterojunctions exhibited enhanced photocatalytic activity. The maximum CO₂ reduction under visible light irradiation was obtained to be 22% during 60 min process time. The enhanced photocatalytic activity could be attributed to the increased optical absorption, the good separation, and immigration of photogenerated charge carriers that decreased the recombination rate of charge carriers in the n-n heterojunction.

Rational Design and Controllable Synthesis of Multishelled Fe2O3@SnO2@C Nanotubes as Advanced Anode Material for Lithium-/Sodium-Ion Batteries

Hierarchical Fe₂O₃ and SnO₂ nanostructures have shown great potential for applications in high-performance ion batteries because of their superiority, including wide resources, facile preparation, environmental friendliness, and high energy density. However, some severe challenges, such as rapid capacity decay due to volume expansion upon cycling and poor conductivity, limit their rate performance. To address this issue, multishelled Fe₂O₃@SnO₂@C (FSC) nanotubes were designed and synthesized by using a template method and Ostwald interaction. The as-prepared FSC nanotubes can deliver a high capacity of 1659 mA h g^-1 at a current density of 200 mA g^-1 and a high reversible capacity of 818 mA h g^-1 at 2000 mA g^-1 for lithium-ion batteries. Particularly, a high specific capacity of 1024 mA h g^-1 is still maintained after 100 charging/discharging cycles at 200 mA g^-1. Applied in sodium-ion batteries, the multishelled FSC nanotubes manifest a high specific capacity of 449 mA h g^-1 after 180 cycles at 50 mA g^-1. Such excellent performances of the as-fabricated FSC nanotubes may be due to the unique multishelled tubular structure, porous characteristics, and high specific surface area. Therefore, the present work provides an outstanding method to improve the energy storage performance of metal oxide composites and other types of nanocomposites.

Enhanced effects of ash and slag on SO3 formation in the post-flame region

The effects of slag, fly ash (formed in boiler above 1500 °C), and experimental ash (formed in muffle furnace at 815 °C) on the formation of sulfur trioxide (SO₃) were studied in a fixed bed rector. The results showed that the slag had the best catalytic effect on SO₃ formation, the effect of fly ash was second, and the effect of experimental ash was the worst. The reason may be that the forms of iron in different samples were different. Iron in the experimental ash all existed in the form of Fe₂O₃. Iron in the fly ash mainly existed in the form of composite iron oxides, such as Fe_0.3Mg_0.7SiO₃, Ca₃Fe₂(SiO₄)₃, and MgFe₂O₄. Iron in the slag also mainly existed in the form of composite iron oxides, such as CaFe₂O₄, MgFe₂O₄, and CaMgO_0.88Fe_0.12SiO₄. The different forms of iron had different effects on SO₃ formation. Composite iron oxides could produce more oxygen vacancies owing to lattice defects. This likely promoted the migration and regeneration of lattice oxygen and thus better promoted the formation of SO₃ than Fe₂O₃. Moreover, MgFe₂O₄ and Ca₃Fe₂(SiO₄)₃ could better promote SO₃ formation than CaMgO_0.88Fe_0.12SiO₄ and Fe_0.3Mg_0.7SiO₃. In addition, increasing the SO₂ concentration and O₂ concentration increased the SO₃ concentration but increasing the SO₂ concentration decreased the SO₃ formation ratio.

In-Depth Understanding of the Morphology Effect of α-Fe2O3 on Catalytic Ethane Destruction

Shape effects of nanocrystal catalysts in different reactions have attracted remarkable attention. In the present work, three types of α-Fe₂O₃ oxides with different micromorphologies were rationally synthesized via a facile solvothermal method and adopted in deep oxidation of ethane. The physicochemical properties of prepared materials were characterized by XRD, N₂ sorption, FE-SEM, HR-TEM, FTIR, in situ DRIFTS, XPS, Mössbauer spectroscopy, in situ Raman, electron energy loss spectroscopy, and H₂-TPR. Moreover, the formation energy of oxygen vacancy and surface electronic structure on various crystal faces of α-Fe₂O₃ were explored by DFT calculations. It is shown that nanosphere-like α-Fe₂O₃ exhibits much higher ethane destruction activity and reaction stability than nanocube-like α-Fe₂O₃ and nanorod-like α-Fe₂O₃ due to larger amounts of oxygen vacancies and lattice defects, which greatly enhance the concentration of reactive oxygen species, oxygen transfer speed, and material redox property. In addition to this, DFT results reveal that nanosphere-like α-Fe₂O₃ has the lowest formation energy of oxygen vacancy on the (110) facet ( E_vo (110) = 1.97 eV) and the strongest adsorption energy for ethane (-0.26 eV) and O₂ (-1.58 eV), which can accelerate the ethane oxidation process. This study has deepened the understanding of the face-dependent activities of α-Fe₂O₃ in alkane destruction.

Biomimetic Straw-Like Bundle Cobalt-Doped Fe2 O3 Electrodes towards Superior Lithium-Ion Storage

Biomimetic straw-like bundles of Co-doped Fe₂ O₃ (SCF), with Co²⁺ incorporated into the lattice of α-Fe₂ O₃ , was fabricated through a cost-effective hydrothermal process and used as the anode material for lithium-ion batteries (LIBs). The SCF exhibited ultrahigh initial discharge specific capacity (1760.7 mA h^-1  g^-1 at 200 mA g^-1 ) and cycling stability (with the capacity retention of 1268.3 mA h^-1  g^-1 after 350 cycles at 200 mA g^-1 ). In addition, a superior rate capacity of 376.1 mA h^-1  g^-1 was obtained at a high current density of 4000 mA g^-1 . The remarkable electrochemical lithium storage of SCF is attributed to the Co-doping, which increases the unit cell volume and affects the whole structure. It makes the Li⁺ insertion-extraction process more flexible. Meanwhile, the distinctive straw-like bundle structure can accelerate Li ion diffusion and alleviate the huge volume expansion upon cycling.

Color Tuning by Oxide Addition in PEDOT:PSS-Based Electrochromic Devices

Poly(3,4-ethylenedi-oxythiophene) (PEDOT) derivatives conducting polymers are known for their great electrochromic (EC) properties offering a reversible blue switch under an applied voltage. Characterizations of symmetrical EC devices, built on combinations of PEDOT thin films, deposited with a bar coater from commercial inks, and separated by a lithium-based ionic membrane, show highest performance for 800 nm thickness. Tuning of the color is further achieved by mixing the PEDOT film with oxides. Taking, in particular, the example of optically inactive iron oxide Fe₂O₃, a dark blue to reddish switch, of which intensity depends on the oxide content, is reported. Careful evaluation of the chromaticity parameters L*, a*, and b*, with oxidizing/reducing potentials, evidences a possible monitoring of the bluish tint.