Assessment of the nutritional composition of quinoa (Chenopodium quinoa Willd.)

Diversity of quinoa genetic resources for sustainable production: A survey on nutritive characteristics as influenced by environmental conditions

Environmental extremes and climatic variability have enhanced the changes in numerous plant stressors. Researchers have been working to improve “major” crops for several decades to make them more adaptable and tolerant to environmental stresses. However, neglected and underutilized crop species that have the potential to ensure food and nutritional security for the ever-growing global population have received little or no research attention. Quinoa is one of these crops. It is a pseudocereal, considered a rich and balanced food resource due to its protein content and protein quality, high mineral content, and health benefits. This review provides currently available information on the genetic resources of quinoa and their quality in terms of variability of economically important traits such as yield, and the content of bioactive compounds, such as protein and amino acid composition. The influence of variety and environmental conditions on selected traits is also discussed. The various types of nutrients present in the different varieties form the basis and are key for future breeding efforts and for efficient, healthy, and sustainable food production.

Changes in nutritional quality-related traits of quinoa seeds under different storage conditions

Within the context of climate change and its impact on global food security, seed storage has become key, as it ensures long-term food and next-season seed preservation. Aiming at evaluating quality-related changes in quinoa seeds over storage time, different storage temperatures (–20, 4, 12, 25, and 37°C) and humidity conditions (use of silica gel or not) were studied and different seed nutritional parameters were evaluated at different points during a year of storage. Also, to determine if these variations could be conditioned by the genotype used, two quinoa cultivars were compared. The results proved that quinoa seed quality is highly dependent on the storage temperature but is not consistently affected by the use of silica gel if the seed moisture content (SMC) is kept between 5 and 12%. Furthermore, quality can be maintained and even improved by keeping SMC lower than 12% and storage temperatures low (4°C). Under these conditions (at 4°C in hermetic packaging with or without silica gel), and after 12 months of storage, there was an increase in amino acids like isoleucine, serine, arginine, glycine, and glutamic acid and in seed viability and germination. On the contrary, quinoa seeds stored at 37°C showed an accumulation of reactive oxygen species (ROS) which was related to a lower antioxidant capacity and a reduction in the contents of essential amino acids like isoleucine, lysine, histidine, and threonine, resulting in a delayed and reduced germination capacity, and, therefore, lower seed quality. Besides, quality-related differences appeared between cultivars highlighting differences linked to the genotype. Overall, this work demonstrates that optimal storage temperatures and SMC can preserve or even improve quinoa seed nutritional quality, which in turn can impact food safety and agriculture.

In vitro fermentation and production of methane and carbon dioxide from rations containing Moringa oleifera leave silage as a replacement of soybean meal: in vitro assessment

Plant leaf meal of some forage trees such as Moringa oleifera has attracted an increasing interest as a good and cheap source of protein. The present in vitro experiment employed the in vitro wireless gas production (GP) technique to evaluate the inclusion of M. oleifera leaves ensiled for 45 days as a replacement for soybean meal in rations. A control basal ration was formulated to contain 17.5% soybean meal as a source of protein. Soybean meal in the control ration was replaced with silage (MOS) at increasing levels of 0 to 100%. Replacing soybean meal with MOS gradually increased (P < 0.001) GP kinetics (asymptotic GP, rate of GP, and lag time of GP). However, soybean meal replacement decreased (P < 0.001) asymptotic methane (CH4) and carbon dioxide (CO2) productions, and rate of CH4 production and increased the lag time of CH4 and CO2 production. Gradual increases (P < 0.001) in the digestibility of dry matter, neutral detergent fiber and acid detergent fiber, ruminal bacteria count, fermentation pH, and the concentrations of ruminal total volatile fatty acids, acetate, and propionate were observed with rations containing MOS. Decreases in the digestibility of crude protein, ruminal protozoal count, and the concentrations of ruminal ammonia-N were observed with MOS rations. It is concluded soybean meal can be completely replaced by MOS with desirable effects on ruminal fermentation.

Innovatively processed quinoa (Chenopodium quinoa Willd.) food: chemistry, structure and end-use characteristics

BACKGROUND

Quinoa (Chenopodium quinoa Willd.) flour and processed traditional Peruvian quinoa breakfast foods were studied to evaluate the effect of extrusion and post-processing on protein properties, morphology and nutritional characteristics (amino acids and dietary fibers).

RESULTS

The extrusion increased quinoa protein crosslinking and aggregation observed by size exclusion high-performance liquid chromatography and the amount of soluble fibers, as well as decreasing the amounts of insoluble fibers in the processed foods. The post-processing drying resulted in additional crosslinking of large protein fractions in the quinoa products. The microstructure of the extruded quinoa breakfast flakes and heat-post-processed samples studied by scanning electron microscopy and X-ray tomography differed greatly; post-drying induced formation of aerated protein microstructures in the heat-treated samples. Nanostructures revealed by small-angle and wide-angle X-ray scattering indicated that extrusion imparted morphological changes in the quinoa protein and starch (dominance of V-type). Overall, extrusion processing only reduced the content of most of the essential amino acids to a minor extent; the content of valine and methionine was reduced to a slightly greater extent, but the final products met the requirements of the Food and Drug Organization.

CONCLUSION

This study presents innovative examples on how extrusion processing and post-processing heat treatment can be used to produce attractive future food alternatives, such as breakfast cereal flakes and porridge powder, from quinoa grains. Extrusion of quinoa flour into Peruvian foods was shown to be mostly impacted by the processing temperature and processing conditions used. Protein crosslinking increased due to extrusion and post-processing heating. Starch crystallinity decreased most when the product was dried after processing. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Formation and thermal and colloidal stability of oil-in-water emulsions stabilized using quinoa and lentil protein blends

BACKGROUND

The amino acid composition, and rheological, thermal and colloidal stability of plant protein-based oil-in-water emulsion systems containing 1.90, 3.50 and 7.70 g 100 mL^-1 protein, fat and carbohydrate, respectively, using quinoa and lentil protein ratios of 100:0 and 60:40 were investigated. The emulsion containing lentil protein showed lower initial, peak and final viscosity values (22.7, 61.7 and 61.6 mPa s, respectively) than the emulsion formulated with quinoa protein alone (34.3, 102 and 80.0 mPa s, respectively) on heat treatment.

RESULTS

Particle size analysis showed that both samples had small particle sizes (~1.36 μm) after homogenization; however, the sample with 60:40 quinoa:lentil protein ratio showed greater physical stability, likely related to the superior emulsifying properties of lentil protein. However, upon heat treatment, large aggregates (~100 μm) were formed in both samples, reducing the physical stability of the samples. This physical stability was increased with the addition of 0.20% sodium dodecyl sulfate (SDS), whereas it was negatively affected by the addition of α-amylase. Addition of α-amylase led to lower viscosity for both emulsion samples, with measured values of 41.8 and 46.0 mPa s for the 100:0 and 60:40 samples, respectively. This suggests that the heat-induced increases in particle size were partially due to hydrophobic interactions between the proteins as SDS disrupts hydrophobic bonds between proteins.

CONCLUSION

These results demonstrated that using a mixture of lentil and quinoa proteins positively affected the physical stability of plant protein-based emulsions, in addition to contributing to a more nutritionally complete amino acid profile - both important considerations in the development of plant-based beverages. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

The Role of Amaranth, Quinoa, and Millets for the Development of Healthy, Sustainable Food Products-A Concise Review

The selection of sustainable crops adaptable to the rapidly changing environment, which also cater to the dietary needs of the growing population, is a primary challenge in meeting food security. Grains from ancient crops such as amaranth, quinoa, and millets are positioned to address this challenge and hence have gained dietary predominance among cereals and pseudocereals due to their nutritional value and energy efficiency. From a nutritional perspective, they are recognized for their complete protein, phenolic compounds and flavonoids, prebiotic fibers, and essential micronutrients, including minerals and vitamins. Bioactive peptides from their proteins have shown antihypertensive, antidiabetic, antioxidant, and anticancer properties. The nutritional diversity of these grains makes them a preferred choice over traditional cereals for developing healthy, sustainable food products such as plant-based dairy, vegan meats, and gluten-free products. With growing consumer awareness about sustainability and health, the categories mentioned above are transitioning from ‘emerging’ to ‘mainstream’; however, there is still a significant need to include such healthy grains to fulfill the nutritional gap. This review article emphasizes the health benefits of amaranth, quinoa, and millet grains and discusses the recent research progress in understanding their application in new sustainable food categories. The challenges associated with their incorporation into novel foods and future research directions are also provided.

Irrigation Regimes and Nitrogen Rates as the Contributing Factors in Quinoa Yield to Increase Water and Nitrogen Efficiencies

Sustainable field crop management has been considered to reach the food security issue due to global warming and water scarcity. The effect of deficit irrigation and nitrogen rates on quinoa yield is a challenging issue in those areas. In this regard, the interaction effects of different N rates (0, 125, 250, and 375 kg N ha-1) and irrigation regimes [full irrigation (FI) and deficit irrigation at 0.75 FI and 0.5 FI] on quinoa yield and water and nitrogen efficiencies were evaluated with a two-year field experiment. Increasing nitrogen fertilizer application levels from 250 to 375 kg N ha-1 under FI and deficit irrigation did not cause a significant difference in seed yield and the total dry matter of quinoa. Furthermore, 20% and 34% reductions were observed for nitrogen use efficiency (NUE) and nitrogen yield efficiency with the application of 375 kg N ha-1 compared with that obtained in 250 kg N ha-1 nitrogen fertilizer, respectively. Therefore, a Nitrogen application rate of 250 kg ha-1 and applying 0.75 FI is suggested as the optimum rate to reach the highest seed water use efficiency (0.7 kg m-3) and NUE (0.28 kg m-3) to gain 4.12 Mg ha-1 quinoa seed yield. Under non-limited water resource conditions, an FI and N application rate of 375 kg ha-1 could be used for higher seed yield; however, under water-deficit regimes, an N application rate of 250 kg ha-1 could be adequate. However, questions about which environmental factors impressively restricted the quinoa growth for optimizing the potential yield need further investigation.

Physicochemical, rheological and structural properties of flours from six quinoa cultivars grown in Colombia

Background

Inclusion of quinoa in the diet of consumers has generated a challenge for quinoa producers and food processors, which involves the study of new cultivars and the functional properties of their flours.

Methods

Six quinoa cultivars (Titicaca, Blanca real, Soracá, Pasankalla, Puno and Nariño) were analyzed for their proximate composition using the methodologies proposed by the Association of Official Analytical Collaboration, AOAC. A rheological analysis was carried out with flours from each cultivar. A sequential test including a flow test, a pasting test and another flow test was programmed to evaluate the flow behavior before and after a heating process. In addition, the structural properties of the cultivar flours were evaluated by Fourier Transform Infrared spectroscopy (FTIR).

Results

It was found that the Pasankalla, Titicaca and Soracá cultivars had a higher (p &lt; 0.05) protein content, while the Puno, Pansakalla and Blanca real cultivars stood out for their higher (p &lt; 0.05) lipid content. On the other hand, it was found that before heating, all quinoa flour dispersions had a dilatant flow (n &gt; 1), but after heating, all of them showed a decrease of index values, where the flours of the Titicaca and Pasankalla cultivars were more affected with a tendency toward a Newtonian flow (n ≈ 1). The pasting test showed that the viscosity varied according to the cultivar tested. It is noteworthy that both Titicaca and Soracá presented a high peak viscosity (0.16 ± 0.01 and 0.13 ± 0.02 Pa·s respectively) and different setback values on cooling (0.100 ± 0.028 and 0.01 ± 0.01 Pa·s respectively). Spectroscopic analysis showed a direct relationship between the intensity of the peaks and the nutritional content of the flours. In addition, secondary protein structures such as β-sheet, β-Turn, α-Helix and Random Coil were identified after deconvolution of the spectra. The differences in the protein structures of each cultivar could allow their identification by this methodology.

Conclusion

It can be concluded that quinoa flours from the six cultivars could be used for the formulation of different food products, such as beverages, baked goods, snacks, pasta and others, acting as nutritional improvers and modifiers of rheological, textural and functional properties.

Evaluating the Nutritional Properties of Food: A Scoping Review

There are many methods or indicators used for evaluating the nutritional value of foods; however, it is difficult to accurately reflect the comprehensive nutritional value of a food with a single indicator, and a systematic evaluation system is lacking. In this article, we systematically summarize the common evaluation methods and indicators of the nutritional value of foods. The purpose of this review was to establish an evaluation procedure for nutritional properties of foodstuffs and to help scientists choose more direct and economical evaluation methods according to food types or relevant indicators. The procedure involves the selection of a three-level evaluation method that covers the whole spectrum of a food’s nutritional characteristics. It is applicable to scientific research in the fields of agricultural science, food science, nutrition, and so on.

Preliminary Characterization of Structural and Rheological Behavior of the Quinoa Hyperprotein-Defatted Flour

Protein functional properties are related to physical and chemical parameters that influence protein behavior in food systems during processing, storage and consumption. The structural and rheological properties of three quinoa hyperprotein flours (without defatting, WD, chemically defatted, CD, and mechanically defatted, MD) were evaluated. The values of the fluidity index (n) were significantly different (p &lt; 0.05), which was associated with changes in protein or starch structures due to solvent treatments or heating of the flour during pressing. In addition, a strong dependence of the consistency index (k) on the shear rate was observed. For dispersions with a concentration of 12% (w/v), CD and WD had a significantly lower setback value than MD. The viscosity peak was affected by the presence of lipid molecules. Greater changes were evident in the β-sheet (1,610 and 1,625 cm−1) and β-spin (1,685 and 1,695 cm−1) structures. The changes identified in these structures were associated with the defatting treatment. Consequently, the intensity ratio 2,920/1,633 cm−1 was more sensitive to changes in the fat content of the flours. It was shown that defatting conditions increase the protein adsorption kinetics and that the viscoelastic properties of the protein increase when the flour has a lower fat content. Hyperprotein quinoa flour could be used to improve the protein content of products such as snacks, pastas, ice cream, bakery products, meat extenders, among others, due to its foaming, gelling or emulsifying capacity. The objective of this work was to study the effect of two types of defatting of hyperprotein quinoa flour on its structural and rheological properties.

Nutritive value of quinoa (Chenopodium quinoa) as a feed for ruminants: in sacco degradability and in vitro gas production

Replacement of conventional feedstuffs with inexpensive and non-conventional ingredients such as quinoa may improve animal performance and the quality of their products. Quinoa supplementation is believed to have a good nutritive value as a ruminant feed, but evidence is scarce. The present experiment aimed to evaluate the nutritive value of whole, dried quinoa plant (Chenopodium quinoa) as a feed for ruminants. In the first experiment, the in sacco technique was used to evaluate nutrient disappearance and fermentation kinetics of quinoa. In the second experiment, the in vitro gas production technique was used to evaluate diets with substitution of clover hay with quinoa at 0 (Q0), 15 (Q15), 30 (Q30), and 45% (Q45) of the diets. Proximate analysis showed that quinoa contained about 18.6% crude protein (CP) with oleic acid, arachic acid, linoleic acid, and palmitic acid as the major fatty acids. The in sacco degradability showed that the "a" fraction of dry matter (DM) was low, while the fraction "b" was high for DM and CP. Replacing clover hay with quinoa did not affect gas or methane production; however, Q30 treatment quadratically increased (P < 0.05) its production. It is concluded that quinoa can be used as a feed for ruminants and can replace clover hay up to 45% in the diet.

Changes in Quinoa Seed Fatty Acid Profile Under Heat Stress Field Conditions

The nutritional quality of quinoa is often related to the high protein content of their seeds. However, and despite not being an oilseed crop, the oil composition of quinoa seeds is remarkable due to its profile, which shows a high proportion of polyunsaturated fatty acids (PUFAs), particularly in essential fatty acids such as linoleic (ω-6) and α-linolenic (ω-3). In line with this, this study aimed at evaluating the effect of elevated temperatures on the oil composition of different quinoa cultivars grown in the field in two consecutive years (i.e., 2017 and 2018). In 2017, heat stress episodes resulted in a reduced oil content and lower quality linked to decreased ratios of oleic acid:linoleic acid, larger omega-6 (ω-6) to omega-3 (ω-3) ratios, and lower monounsaturated fatty acid (MUFA) and higher PUFA contents. Furthermore, the correlations found between mineral nutrients such as phosphorous (P) and the contents of oleic and linoleic acids emphasize the possibility of optimizing oil quality by controlling fertilization. Overall, the results presented in this study show how the environmental and genetic factors and their interaction may impact oil quality in quinoa seeds.

Natural Variation in Vitamin B1 and Vitamin B6 Contents in Rice Germplasm

Insufficient dietary intake of micronutrients contributes to the onset of deficiencies termed hidden hunger-a global health problem affecting approximately 2 billion people. Vitamin B1 (thiamine) and vitamin B6 (pyridoxine) are essential micronutrients because of their roles as enzymatic cofactors in all organisms. Metabolic engineering attempts to biofortify rice endosperm-a poor source of several micronutrients leading to deficiencies when consumed monotonously-have led to only minimal improvements in vitamin B1 and B6 contents. To determine if rice germplasm could be exploited for biofortification of rice endosperm, we screened 59 genetically diverse accessions under greenhouse conditions for variation in vitamin B1 and vitamin B6 contents across three tissue types (leaves, unpolished and polished grain). Accessions from low, intermediate and high vitamin categories that had similar vitamin levels in two greenhouse experiments were chosen for in-depth vitamer profiling and selected biosynthesis gene expression analyses. Vitamin B1 and B6 contents in polished seeds varied almost 4-fold. Genes encoding select vitamin B1 and B6 biosynthesis de novo enzymes (THIC for vitamin B1, PDX1.3a-c and PDX2 for vitamin B6) were differentially expressed in leaves across accessions contrasting in their respective vitamin contents. These expression levels did not correlate with leaf and unpolished seed vitamin contents, except for THIC expression in leaves that was positively correlated with total vitamin B1 contents in polished seeds. This study expands our knowledge of diversity in micronutrient traits in rice germplasm and provides insights into the expression of genes for vitamin B1 and B6 biosynthesis in rice.

Physicochemical Characterization of Quinoa (Chenopodium quinoa cv. Nariño) Co-products Obtained by Wet Milling

In recent years, great interest has been shown in pseudocereals for their high nutritional value. Wet milling has been used to obtain macromolecules such as proteins and starches. However, the co-products obtained from this food industry have been studied little. A factorial design Box-benhken was used to study the effect of surfactant concentration (SDS), sodium hydroxide (NaOH) concentration and maceration temperature on structural and colorimetric properties. Structural properties were evaluated by infrared spectroscopy (FTIR-ATR) and color changes by the CIElab tristimulus method (L*, a*, b*). A decrease in temperature and NaOH causes a decrease in lightness (L*), resulting in lower starch content and higher protein content in the co-product. This behavior was correlated with the infrared spectroscopy (FTIR-ATR) spectra. The spectra show a possible structural change in the amylose/amylopectin ratio of the starch granule at 1,012 cm−1, 1,077 cm−1, and 1,150 cm−1 bands, which are associated with glycosidic bonds, these bonds were sensitive to NaOH concentration. While those bands assigned to Amide II (1,563 cm−1) and Amide I (1,633 cm−1), were sensitive to the effect of NaOH and maceration temperature, evidencing that protein content in the co-products is variable and depends significantly on the extraction conditions. The co-products obtained by wet milling could be used in the development of functional foods, such as bread, snacks, pasta and other products.

Effects of added cereal fibers on the quality characteristics of black pudding prepared with duck blood

We investigated the physicochemical and rheological properties of black pudding prepared with duck blood using various combinations of cereal fiber sources: oat, buckwheat, quinoa, amaranth, and sorghum. The processing yield of black pudding made with duck blood and the cereals was higher than that of the control (without cereals) in all cases (P < 0.05). The moisture content of the black pudding was the highest in the buckwheat and amaranth groups (P < 0.05). The water activity, pH, and yellowness of the black pudding combined with duck blood and cereals were lower than that of the control (P < 0.05). The hardness of the black pudding with duck blood and cereals was higher than that of the control (P < 0.05), except for the amaranth group. The cohesiveness, gumminess, and chewiness of the black pudding with duck blood and cereals were higher than that of the control (P < 0.05). Differential scanning colorimetry showed distinct peak points according to treatment at the same temperature, and all treatments exhibited 2 peak temperatures, except for sorghum. The viscosities of all samples, including the control, decreased as the shear rate increased, and the viscosity of the black pudding with oat was slightly lower than that of the other samples. Thus, black pudding prepared with duck blood and cereal fibers showed excellent physicochemical and rheological properties, suggesting an improved processing method. These findings can further the development of products using duck blood as a valuable nutritional source rather than being lost as a by-product during slaughter.

Green and eco-friendly synthesis of TiO2 nanoparticles and their application for removal of cadmium from wastewater: reaction kinetics study

The heavy metal cadmium (Cd) is known to be a widespread environmental contaminant and a potential toxin that may adversely affect human health across the globe. Green nanotechnology has recently received a lot of attention for developing eco-friendly, low-cost renewable and sustainable materials for the efficient removal of persistent contaminants from wastewater, including heavy metals (HMs). The current study compared the ability of titanium dioxide nanoparticles (TiO2 NPs) synthesized from Trianthema portulacastrum (A) and Chenopodium quinoa (B) extracts to remove Cd from wastewater. The washed biomass of both the plants was dried under shade for a few days and was ground into the fine particles in a blender. The powdered biomass of T. portulacastrum and C. quinoa was soaked separately in distilled water (@ 10 g/100 ml) for 36 h. The stock solution of titanium (0.3 M) was prepared from concentrated titanium tetraisopropoxide (TTIP) and was mixed with the plant extracts at 1:2 ratio of extract to TTIP solution with continuous stirring at room temperature. A light brown scum like TiO2-NPs were obtained at the bottom of china dish and calcined at 450 °C for 4 h. Finally, after natural cooling, the TiO2-NPs were collected and used for the sorption of Cd through wastewater. Sorption attributes of both TiO2 NPs (A, B) were investigated over contact time, dosage of adsorbent, pH, and initial concentration of Cd. Maximum sorption was obtained (46 mgg−1) by TiO2 NPs (A), followed by 44 mg Cd g−1 with TiO2 NPs (B) at pH 4.2, an optimum adsorbent dosage 0.7 g L−1, Cd initial level 30 mg L−1, with contact time of 2 h. Pseudo-second-order kinetic model was suited for adsorption experimental data using both nanoparticles. These results validated the potential use of TiO2 NPs to remove liquified cadmium at high concentrations from the industrial wastewater.

Significance of milling methods on brown teff flour, dough, and bread properties

Teff (Eragrostis tef) has gained wide popularity of late mainly attributed to its gluten-free nature catering the needs of gluten sensitive population. The higher water absorption capacity and gelling properties of teff flour promote its food applications, especially in the baking sector. The nutritional and sensorial properties of teff flour have been studied by incorporating with wheat flour at different proportions, but no study has reported the impact of various milling methods on the rheological and bread-making properties of teff flour. In this regard, the present study is envisaged to assess the physical, rheological and bread-making properties of teff flour acquired over roller, hammer and pin milling. Among the milling methods, the distribution of particles was more uniform in case of roller mill, while finer particles were obtained for the pin milled flour fractions with 60% of the sample falling below 90 μm. It was observed that the protein, crude fiber and crude fat contents for all the flours were on par with each other irrespective of the milling method. Whereas, the pasting properties varied significantly between the flours obtained from different milling methods. It was observed that the pin milled flour bread was superior in quality owing to its higher loaf volume (331.67 cm³ ) with lower hardness value (5.99 N). The present study indicates the fact that, pin mill could be more suitable for milling brown teff grains owing to the better pasting and bread making properties. This article is protected by copyright. All rights reserved.

Application of Chromatographic and Thermal Methods to Study Fatty Acids Composition and Positional Distribution, Oxidation Kinetic Parameters and Melting Profile as Important Factors Characterizing Amaranth and Quinoa Oils

Amaranth and quinoa are classed as pseudocereals that do not belong to the grass family, meaning they are not technically a grain. Both of them are seeds with tremendous nutritional value; compared to other cereals, they contain much more fat. The aim of the study was to present the parameters characterizing thermal properties of amaranth and quinoa oils, such as: oxidation induction time, oxidation kinetic parameters, and melting profile. In isolated oils, the peroxide value, oxidative stability by the Rancimat test (in 120 °C) and the pressure differential scanning calorimetry (PDSC) method (at 100, 110, 120, 130, 140 °C), fatty acids composition, and their distribution between the triacylglycerol positions were determined. The kinetic parameters of the oxidation process (activation energy, pre-exponential factor, and reaction rate constants) were calculated using the Ozawa–Flynn–Wall method and the Arrhenius equation. To measure the melting profile, the differential scanning calorimetry (DSC) method was used. Both types of seeds are a good source of unsaturated fatty acids. Induction time of oxidation suggests that amaranth oil may have better resistance to oxidation than quinoa oil. The melting characteristics of the oils show the presence of low-melting triacylglycerol fractions, mainly containing unsaturated fatty acids, which means that a small amount of energy is required to melt the fats.

Nutritional Composition and Bioactive Components in Quinoa (Chenopodium quinoa Willd.) Greens: A Review

Quinoa (Chenopodium quinoa Willd.) is a nutrient-rich grain native to South America and eaten worldwide as a healthy food, sometimes even referred to as a ”superfood”. Like quinoa grains, quinoa greens (green leaves, sprouts, and microgreens) are also rich in nutrients and have health promoting properties such as being antimicrobial, anticancer, antidiabetic, antioxidant, antiobesity, and cardio-beneficial. Quinoa greens are gluten-free and provide an excellent source of protein, amino acids, essential minerals, and omega-3 fatty acids. Quinoa greens represent a promising value-added vegetable that could resolve malnutrition problems and contribute to food and nutritional security. The greens can be grown year-round (in the field, high tunnel, and greenhouse) and have short growth durations. In addition, quinoa is salt-, drought-, and cold-tolerant and requires little fertilizer and water to grow. Nevertheless, consumption of quinoa greens as leafy vegetables is uncommon. To date, only a few researchers have investigated the nutritional properties, phytochemical composition, and human health benefits of quinoa greens. We undertook a comprehensive review of the literature on quinoa greens to explore their nutritional and functional significance to human health and to bring awareness to their use in human diets.

Quinoa Soluble Fiber and Quercetin Alter the Composition of the Gut Microbiome and Improve Brush Border Membrane Morphology In Vivo (Gallus gallus)

Quinoa (Chenopodium quinoa Willd.), a gluten-free pseudo-cereal, has gained popularity over the last decade due to its high nutritional value. Quinoa is a rich source of proteins, carbohydrates, fibers, tocopherols (Vitamin E), unsaturated fatty acids and a wide range of polyphenols. The study used Gallus gallus intra-amniotic feeding, a clinically validated method, to assess the effects of quinoa soluble fiber (QSF) and quercetin 3-glucoside (Q3G) versus control. Quercetin is a pharmacologically active polyphenol found in quinoa. Six groups (no injection, 18 Ω H2O, 5% inulin, 1% Q3G, 5% QSF, 1% Q3G + 5% QSF) were assessed for their effect on the brush border membrane (BBM) functionality, intestinal morphology and cecal bacterial populations. Our results showed a significant (p < 0.05) improvement in BBM morphology, particularly goblet and Paneth cell numbers, in the group administered with quinoa and quercetin. However, there were no significant changes seen in the expression of the genes assessed both in the duodenum and liver between any of the treatment groups. Furthermore, fibrous quinoa increased the concentration of probiotic L. plantarum populations compared to the control (H2O). In conclusion, quercetin and quinoa fiber consumption has the potential to improve intestinal morphology and modulate the microbiome.

Physicochemical Characterization of Thirteen Quinoa (Chenopodium quinoa Willd.) Varieties Grown in North-West Europe-Part II

Quinoa cultivation has gained increasing interest in Europe but more research on the characteristics of European varieties is required to help determine their end use applications. A comparative study was performed on 13 quinoa varieties cultivated under North-West European field conditions during three consecutive growing seasons (2017-2019). The seeds were milled to wholemeal flour (WMF) to evaluate the physicochemical properties. The WMFs of 2019 were characterized by the highest water absorption capacity (1.46-2.06 g/g), while the water absorption index (WAI) between 55 °C (2.04-3.80 g/g) and 85 °C (4.04-7.82 g/g) increased over the years. The WMFs of 2018 had the highest WAI at 95 °C (6.48-9.48 g/g). The pasting profiles were characterized by a high viscosity peak (1696-2560 mPa.s) and strong breakdown (-78-643 mPa.s) in 2017. The peak viscosity decreased in 2018 and 2019 (823-2492 mPa.s), while breakdown (-364-555 mPa.s) and setback (19-1037 mPa.s) increased. Jessie, Summer Red, Rouge Marie, Vikinga, and Zwarte WMFs were characterized by low WAIs and high shear resistance. Bastille WMF developed high viscosities and, along with Faro WMF, showed a high breakdown. The wide variation in physicochemical properties suggests that the potential food applications of WMFs depend on the variety and growing conditions.

Nutritional Value and Bioactive Compounds of Leaves and Grains from Quinoa (Chenopodium quinoa Willd.)

Quinoa is an important crop for food security and food sovereignty in Ecuador. In this study, we evaluated the nutritional value, bioactive compounds, and antinutrient compounds of leaves and grains of the Ecuadorian quinoa variety Tunkahuan, and we identified significant differences between the nutrient content in the leaves and grains. The quinoa leaves presented a higher protein content than the grains, as well as inorganic nutrients such as calcium, phosphorus, iron, and zinc. Both the grains and leaves had an appreciable phenolic content. In addition, the quinoa grains presented a higher content of the antinutrient saponin than the leaves, while the leaves contained more nitrates and oxalates than the grains. Thus, quinoa leaves and grains exhibit excellent potential for application in the food and pharmaceutical industries.

Starch and protein hydrolysis in cooked quinoa (Chenopodium quinoa Willd.) during static and dynamic in vitro oral and gastric digestion

Quinoa is a pseudocereal that has a favorable nutrient profile and may be a beneficial addition to the diet. To evaluate potential health-promoting properties of foods, it is important to understand the rate of macronutrient hydrolysis, which is commonly quantified through in vitro digestion studies. Additionally, limited information is available comparing starch and protein hydrolysis of solid foods using static and dynamic digestion models. The objective of this study was to examine starch and protein hydrolysis in cooked quinoa using a combination of a static (saliva only) or dynamic (saliva + mincing) oral digestion model with a static (gastric fluids only) or dynamic (Human Gastric Simulator) gastric digestion model. Disruption of the pericarp of the cooked quinoa seeds during dynamic oral digestion released additional surface area, which led to faster gastric emptying during dynamic gastric digestion. Starch and protein hydrolysis were impacted by type of gastric model due to differences in pH and variations in structural breakdown. Starch hydrolysis was 29.04 ± 1.83% after 180 min dynamic gastric digestion compared to 2.85 ± 1.88% during static gastric digestion (averaged across both oral digestion models). The degree of protein hydrolysis was 4.85 ± 0.01% after 180 min in the static gastric model compared to 3.94 ± 0.18% in the dynamic gastric model (averaged across both oral digestion models). This information provides evidence on the role of food structure and breakdown (through use of static vs. dynamic oral and gastric digestion models) on quinoa starch and protein hydrolysis.

Effect of Different Black Quinoa Fractions (Seed, Flour and Wet-Milling Coproducts) upon Quality of Meat Patties during Freezing Storage

In this study, the quality of meat patty samples containing different black quinoa fractions (seed, flour and wet-milling coproducts) was evaluated during freezing preservation. Composition, physicochemical parameters (aw, pH, colour and texture), cooking properties, lipid oxidation and sensory characteristic were studied in four batches (control and 8% concentration of quinoa seed, flour and wet-milling coproducts added) at 30, 60 and 90 days of freezing (−20 ± 1 °C). Different black quinoa fraction addition affected (p < 0.05) physiochemical properties, improved cooking properties and reduced lipid oxidations during freezing storage. Batches with flour and wet-milling coproducts added were the most stable for texture parameters and lipid oxidation during freezing. The results obtained showed that quinoa wet-milling co-products could be considered a valuable sustainable and organic food ingredient, maintaining nutritional and global qualities of the fresh meat product. In addition, freezing storage is an effective way to prolong the shelf life of patties with different black quinoa fractions, added without affecting quality.

Textural and sensory characteristics of sugar-free biscuit formulated with quinoa flour, isomalt, and maltodextrin

A low-calorie biscuit formulation containing quinoa flour (cultivars TTKK), isomalt, and maltodextrin was optimized using response surface methodology. Optimized samples were evaluated in terms of total phenolic compounds (TPC), sensory properties, and nutritional value while samples containing only wheat flour (Pishgam var.) and sucrose were used as control. Morphology of isolated starch from quinoa was also investigated. The results showed that with increasing amounts of quinoa, isomalt, and maltodextrin ΔE and Browning index increased, whereas hardness and L values decreased. The formulation containing 25% quinoa flour, 3.5% maltodextrin, and 10% isomalt was found to be optimal with an overall desirability value of 0.95. The sensory evaluation showed that replacement of wheat flour with 25 g/100 g quinoa flour in biscuits was acceptable. TPC of the optimal biscuit (1,180.34 ± 0.02 μg GAE/g) was higher than that of the control sample (729.95 ± 0.007 μg GAE/g). In addition, the optimized biscuit had more protein (8.36 ± 0.035%) and dietary fiber (2.14 ± 0.035%) content compared with the control sample (7.01 ± 0.007% and 1.66 ± 0.028%, respectively). The consumption of 100 g of optimized quinoa biscuits supplies the daily requirement of Fe, Mg, Ca, and Zn at 2.43%, 44.81%, 19.46% and 1.12%, respectively.

Crosstalk during the Carbon-Nitrogen Cycle That Interlinks the Biosynthesis, Mobilization and Accumulation of Seed Storage Reserves

Carbohydrates are the major storage reserves in seeds, and they are produced and accumulated in specific tissues during the growth and development of a plant. The storage products are hydrolyzed into a mobile form, and they are then translocated to the developing tissue following seed germination, thereby ensuring new plant formation and seedling vigor. The utilization of seed reserves is an important characteristic of seed quality. This review focuses on the seed storage reserve composition, source–sink relations and partitioning of the major transported carbohydrate form, i.e., sucrose, into different reserves through sucrolytic processes, biosynthetic pathways, interchanging levels during mobilization and crosstalk based on vital biochemical pathways that interlink the carbon and nitrogen cycles. Seed storage reserves are important due to their nutritional value; therefore, novel approaches to augmenting the targeted storage reserve are also discussed.

Botany, Nutritional Value, Phytochemical Composition and Biological Activities of Quinoa

Quinoa is a climate-resilient food grain crop that has gained significant importance in the last few years due to its nutritional composition, phytochemical properties and associated health benefits. Quinoa grain is enriched in amino acids, fiber, minerals, phenolics, saponins, phytosterols and vitamins. Quinoa possesses different human-health promoting biological substances and nutraceutical molecules. This review synthesizes and summarizes recent findings regarding the nutrition and phytochemical properties of quinoa grains and discusses the associated biological mechanisms. Quinoa grains and grain-based supplements are useful in treating different biological disorders of the human body. Quinoa is being promoted as an exceptionally healthy food and a gluten-free super grain. Quinoa could be used as a biomedicine due to the presence of functional compounds that may help to prevent various chronic diseases. Future research needs to explore the nutraceutical and pharmaceutical aspects of quinoa that might help to control different chronic diseases and to promote human health.

Transcriptome Analysis Reveals the Molecular Mechanism of GABA Accumulation during Quinoa (Chenopodium quinoa Willd.) Germination

Quinoa (Chenopodium quinoa Willd.) with a history of 5000 years as food is extremely rich in nutrients and bioactive compounds, including γ-aminobutyric acid (GABA), a natural four-carbon non-protein amino acid with great benefits to human health. In quinoa, GABA generally increases with the germination time, but the underlying molecular mechanism is unclear. Here, we found that the GABA content in quinoa varied significantly among 25 varieties using an automatic amino acid analyzer. Next, six varieties (three low-GABA and three high-GABA varieties) were used for further analyses. The content of GABA in six varieties all showed an increasing trend after germination. In addition, Pearson's correlation analysis showed that the changes in GABA content were closely related to the transcript level or enzyme activity of three key enzymes including glutamate decarboxylase (GAD), GABA transaminase (GABA-T), and succinate-semialdehyde dehydrogenase (SSADH) in the GABA shunt, especially GAD. Based on RNA-sequencing analysis, eight GAD genes, two GABA-T genes, one SSADH gene, nine polyamine oxidase (PAO) genes, five diamine oxidase (DAO) genes, four 4-aminobutyraldehyde dehydrogenase (BADH) genes, and three thermospermine synthase ACAULIS5 (ACL5) genes were identified. Among these, CqGAD8 and CqGABA-T2 may make a greater contribution to GABA accumulation during quinoa germination.

Biological synthesis, characterization of three metal-based nanoparticles and their anticancer activities against hepatocellular carcinoma HepG2 cells

Treatment of liver cancer has always been a challenge for clinicians and development of appropriate drug against hepatocellular carcinoma is the major focus for researchers working in the field. The synthesis of metal-based nanoparticles (NPs) by green method for pharmacological uses has attained considerable attention recently. In current study three different NPs (AgO₂, CeO₂, CuO₂) were synthesized by using Trianthima portulacastrum and Chinopodium quinoa leaf extracts. These biogenic NPs were analyzed by High-tech. approaches including Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) spectroscope, SEM-EDS spot analysis, elemental mapping and X-ray diffraction (XRD). The anticancer potential of these nanoparticles was estimated using MTT assay, against hepatic cancer cell line (HepG2). SEM secondary electron images presented the nano size of prepared particles in agglomerated form with few porous forms. Average size of Ag-, Ce-, and CuNPs was observed 19-24 nm, 8-12 nm, 13-15 nm respectively. Elemental mapping and EDS-spot analysis ratifies the formation of AgNPs, CeNPs, and CuNPs. These NPs have shown good anticancer activity at different concentrations against HepG2 cell line. Further studies are however needed to identify the molecular mechanisms of these anticancer activities.

Investigation of Quinoa Seeds Fractions and Their Application in Wheat Bread Production

The present study aimed to investigate the influence of quinoa fractions (QF) on the chemical components of wheat flour (WF), dough rheological properties, and baking performance of wheat bread. The microstructure and molecular conformations of QF fractions were dependent to the particle size. The protein, lipids, and ash contents of composite flours increased with the increase of QF addition level, while particle size (PS) decreased these parameters as follows: Medium ˃ Small ˃ Large, the values being higher compared with the control (WF). QF addition raised dough tenacity from 86.33 to 117.00 mm H₂O, except for the small fraction, and decreased the extensibility from 94.00 to 26.00 mm, while PS determined an irregular trend. The highest QF addition levels and PS led to the highest dough viscoelastic moduli (55,420 Pa for QL_20, 65245 Pa for QM_20 and 48305 Pa for QS_20, respectively). Gradual increase of QF determined dough hardness increase and adhesiveness decrease. Bread firmness, springiness, and gumminess rises were proportional to the addition level. The volume, elasticity, and porosity of bread decreased with QF addition. Flour and bread crust and crumb color parameters were also influenced by QF addition with different PS.

Effect of heating under pressure treatment on the antioxidant of quinoa

Heating under pressure treatment (HUP) is a method which can keep the complete form of quinoa grain after processing, which is beneficial to the development of subsequent products. The conditions for quinoa heating under pressure was optimized by response surface methodology to be: quinoa grains were regulated with adding 6.3% of pH 7.0 water and heated under 0.36 MPa pressure for 3–5 min, resulting in the predicted maxima of total phenolic content (TPC), Flavonoid and Saponin content were 313.21 mg GAE/100 g, 1.621 mg/g, and 16.78 mg/g and the values of OH Scavenging Rate, DPPH Scavenging Rate, ABST+ Scavenging Rate were 69.45, 91.73, and 52.38% separately. The content of flavonoid and saponin in the HUP samples were more than that in the boiled, baked, and extruded samples, which were close to that in raw quinoa sample, and meaning high retention of active phytochemicals and antioxidation activity in HUP quinoa. The hydroxyl radical scavenging rate is related to the content of polyphenol, flavonoid and saponin.

R. Patiranage D, Johansen K, Schmöckel SM, Bertero D, Oakey H, Colque-Little C, Afzal I, Raubach S, Miller N, Streich J, Amby DB, Emrani N, Warmington M, Mousa MAA, Wu D, Jacobson D, Andreasen C, Jung C, Murphy K, Bazile D, Tester M. Quinoa Phenotyping Methodologies: An International Consensus

Quinoa is a crop originating in the Andes but grown more widely and with the genetic potential for significant further expansion. Due to the phenotypic plasticity of quinoa, varieties need to be assessed across years and multiple locations. To improve comparability among field trials across the globe and to facilitate collaborations, components of the trials need to be kept consistent, including the type and methods of data collected. Here, an internationally open-access framework for phenotyping a wide range of quinoa features is proposed to facilitate the systematic agronomic, physiological and genetic characterization of quinoa for crop adaptation and improvement. Mature plant phenotyping is a central aspect of this paper, including detailed descriptions and the provision of phenotyping cards to facilitate consistency in data collection. High-throughput methods for multi-temporal phenotyping based on remote sensing technologies are described. Tools for higher-throughput post-harvest phenotyping of seeds are presented. A guideline for approaching quinoa field trials including the collection of environmental data and designing layouts with statistical robustness is suggested. To move towards developing resources for quinoa in line with major cereal crops, a database was created. The Quinoa Germinate Platform will serve as a central repository of data for quinoa researchers globally.

Integrating Omics and Gene Editing Tools for Rapid Improvement of Traditional Food Plants for Diversified and Sustainable Food Security

Indigenous communities across the globe, especially in rural areas, consume locally available plants known as Traditional Food Plants (TFPs) for their nutritional and health-related needs. Recent research shows that many TFPs are highly nutritious as they contain health beneficial metabolites, vitamins, mineral elements and other nutrients. Excessive reliance on the mainstream staple crops has its own disadvantages. Traditional food plants are nowadays considered important crops of the future and can act as supplementary foods for the burgeoning global population. They can also act as emergency foods in situations such as COVID-19 and in times of other pandemics. The current situation necessitates locally available alternative nutritious TFPs for sustainable food production. To increase the cultivation or improve the traits in TFPs, it is essential to understand the molecular basis of the genes that regulate some important traits such as nutritional components and resilience to biotic and abiotic stresses. The integrated use of modern omics and gene editing technologies provide great opportunities to better understand the genetic and molecular basis of superior nutrient content, climate-resilient traits and adaptation to local agroclimatic zones. Recently, realizing the importance and benefits of TFPs, scientists have shown interest in the prospection and sequencing of TFPs for their improvements, cultivation and mainstreaming. Integrated omics such as genomics, transcriptomics, proteomics, metabolomics and ionomics are successfully used in plants and have provided a comprehensive understanding of gene-protein-metabolite networks. Combined use of omics and editing tools has led to successful editing of beneficial traits in several TFPs. This suggests that there is ample scope for improvement of TFPs for sustainable food production. In this article, we highlight the importance, scope and progress towards improvement of TFPs for valuable traits by integrated use of omics and gene editing techniques.

The genotype-dependent phenotypic landscape of quinoa in salt tolerance and key growth traits

Cultivation of quinoa (Chenopodium quinoa), an annual pseudocereal crop that originated in the Andes, is spreading globally. Because quinoa is highly nutritious and resistant to multiple abiotic stresses, it is emerging as a valuable crop to provide food and nutrition security worldwide. However, molecular analyses have been hindered by the genetic heterogeneity resulting from partial outcrossing. In this study, we generated 136 inbred quinoa lines as a basis for the molecular identification and characterization of gene functions in quinoa through genotyping and phenotyping. Following genotyping-by-sequencing analysis of the inbred lines, we selected 5,753 single-nucleotide polymorphisms (SNPs) in the quinoa genome. Based on these SNPs, we show that our quinoa inbred lines fall into three genetic sub-populations. Moreover, we measured phenotypes, such as salt tolerance and key growth traits in the inbred quinoa lines and generated a heatmap that provides a succinct overview of the genotype–phenotype relationship between inbred quinoa lines. We also demonstrate that, in contrast to northern highland lines, most lowland and southern highland lines can germinate even under high salinity conditions. These findings provide a basis for the molecular elucidation and genetic improvement of quinoa and improve our understanding of the evolutionary process underlying quinoa domestication.

How Does Mechanical Pearling Affect Quinoa Nutrients and Saponin Contents?

Agriculture is facing many challenges, such as climate change, drought, and salinity, which call for urgent interventions for fast adaptation and crop diversification. The introduction of high-value and stress tolerant crops such as quinoa would be a judicious solution to overcome constraints related to abiotic stress and to increase land productivity and farmers’ incomes. The implementation of quinoa in Morocco has not been supported by a full valorization program to control the quality of quinoa seeds. The novelty of this work is to assess the pearling operation as an efficient method of saponins removal as well as the determination of total residual saponins. This study aimed to evaluate the effects of several pearling durations on nutrient and saponin content of quinoa seeds of three tested varieties (Puno, Titicaca, and ICBA-Q5). Five pearling durations were tested (0, 2, 4, 6, 7, and 8 min) using a locally manufactured pearling machine. The results indicated that a pearling duration of two minutes was enough to reduce total saponin content from 0.49% to 0.09% for Puno variety, from 0.37% to 0.07% for Titicaca variety, and from 0.57% to 0.1% for ICBA-Q5 variety. Our results showed that pearling slightly reduced protein, total fat, and moisture contents for all varieties except for Puno, where total fat content slightly increased with the pearling. Puno variety had the highest seed content in terms of protein and total fat; the ICBA-Q5 variety had the lowest. Titicaca had the highest bran content in terms of protein and total fat, ICBA-Q5 had the highest bran content in terms of ash and the lowest bran content in terms of protein and total fat, and Puno had the lowest bran content in terms of ash. Pearling had no significant effect on macronutrient contents in the processed seed, but it resulted in a very highly significant difference for most of them in the bran except for Mg and S. Regarding seed content in terms of micro-nutrients, statistical analysis showed significant differences between varieties in terms of Zn, Cu, and Mn contents, but no significant difference was recorded for Fe or B. Pearling had no significant effect on seed micronutrient contents. Therefore, to retain maximum nutritional content in the quinoa and maintain quinoa integrity, it is necessary to limit the pearling duration of quinoa to two minutes, which is enough to reduce saponin content below the Codex Standard threshold (0.12%).