Aerosol Health Effects from Molecular to Global Scales

Oxidized and Unsaturated: Key Organic Aerosol Traits Associated with Cellular Reactive Oxygen Species Production in the Southeastern United States

Exposure to ambient fine particulate matter (PM2.5) is associated with millions of premature deaths annually. Oxidative stress through overproduction of reactive oxygen species (ROS) is a possible mechanism for PM2.5-induced health effects. Organic aerosol (OA) is a dominant component of PM2.5 worldwide, yet its role in PM2.5 toxicity is poorly understood due to its chemical complexity. Here, through integrated cellular ROS measurements and detailed multi-instrument chemical characterization of PM in urban southeastern United States, we show that oxygenated OA (OOA), especially more-oxidized OOA, is the main OA type associated with cellular ROS production. We further reveal that highly unsaturated species containing carbon-oxygen double bonds and aromatic rings in OOA are major contributors to cellular ROS production. These results highlight the key chemical features of ambient OA driving its toxicity. As more-oxidized OOA is ubiquitous and abundant in the atmosphere, this emphasizes the need to understand its sources and chemical processing when formulating effective strategies to mitigate PM2.5 health impacts.

Impurity contribution to ultraviolet absorption of saturated fatty acids

Saturated fatty acids are abundant organic compounds in oceans and sea sprays. Their photochemical reactions induced by solar radiation have recently been found as an abiotic source of volatile organic compounds, which serve as precursors of secondary organic aerosols. However, photoabsorption of wavelengths longer than 250 nanometers in liquid saturated fatty acids remains unexplained, despite being first reported in 1931. Here, we demonstrate that the previously reported absorption of wavelengths longer than 250 nanometers by liquid nonanoic acid [CH3(CH2)7COOH)] originates from traces of impurities (0.1% at most) intrinsically contained in nonanoic acid reagents. Absorption cross sections of nonanoic acid newly obtained here indicate that the upper limit of its photolysis rate is three to five orders of magnitude smaller than those for atmospherically relevant carbonyl compounds.

Global Health and Climate Effects of Organic Aerosols from Different Sources

The impact of aerosols on human health and climate is well-recognized, yet many studies have only focused on total PM2.5 or changes from anthropogenic activities. This study quantifies the health and climate effects of organic aerosols (OA) from anthropogenic, biomass burning, and biogenic sources. Using two atmospheric chemistry models, CAM-chem and GEOS-Chem, our findings reveal that anthropogenic primary OA (POA) has the highest efficiency for health effects but the lowest for direct radiative effects due to spatial and temporal variations associated with population and surface albedo. The treatment of POA as nonvolatile or semivolatile also influences these efficiencies through different chemical processes. Biogenic OA shows moderate efficiency for health effects and the highest for direct radiative effects but has the lowest efficiency for indirect effects due to the reduced high cloud, caused by stabilized temperature profiles from aerosol-radiation interactions in biogenic OA-rich regions. Biomass burning OA is important for cloud radiative effect changes in remote atmospheres due to its ability to be transported further than other OAs. This study highlights the importance of not only OA characteristics such as toxicity and refractive index but also atmospheric processes such as transport and chemistry in determining health and climate impact efficiencies.

Time-Resolved Molecular Characterization of Secondary Organic Aerosol Formed from OH and NO3 Radical Initiated Oxidation of a Mixture of Aromatic Precursors

Aromatic hydrocarbons (ArHCs) and oxygenated aromatic hydrocarbons (ArHC-OHs) are emitted from a variety of anthropogenic activities and are important precursors of secondary organic aerosol (SOA) in urban areas. Here, we analyzed and compared the composition of SOA formed from the oxidation of a mixture of aromatic VOCs by OH and NO3 radicals. The VOC mixture was composed of toluene (C7H8), p-xylene + ethylbenzene (C8H10), 1,3,5-trimethylbenzene (C9H12), phenol (C6H6O), cresol (C7H8O), 2,6-dimethylphenol (C8H10O), and 2,4,6-trimethylphenol (C9H12O) in a proportion where the aromatic VOCs were chosen to approximate day-time traffic-related emissions in Delhi, and the aromatic alcohols make up 20% of the mixture. These VOCs are prominent in other cities as well, including those influenced by biomass combustion. In the NO3 experiments, large contributions from CxHyOzN dimers (C15-C18) were observed, corresponding to fast SOA formation within 15-20 min after the start of chemistry. Additionally, the dimers were a mixture of different combinations of the initial VOCs, highlighting the importance of exploring SOAs from mixed VOC systems. In contrast, the experiments with OH radicals yielded gradual SOA mass formation, with CxHyOz monomers (C6-C9) being the dominant constituents. The evolution of SOA composition with time was tracked and a fast degradation of dimers was observed in the NO3 experiments, with concurrent formation of monomer species. The rates of dimer decomposition in NO3 SOA were ∼2-3 times higher compared to those previously determined for α-pinene + O3 SOA, highlighting the dependence of particle-phase reactions on VOC precursors and oxidants. In contrast, the SOA produced in the OH experiments did not dramatically change over the same time frame. No measurable effects of humidity were observed on the composition and evolution of SOA.

Sulfate Formation by Photosensitization in Mixed Incense Burning-Sodium Chloride Particles: Effects of RH, Light Intensity, and Aerosol Aging

Elevated particulate sulfate concentrations have been frequently observed in coastal areas when air masses are influenced by continental emissions, especially combustion sources like biomass burning. We studied the SO2 uptake by laboratory-generated droplets containing incense smoke extracts and sodium chloride (IS-NaCl) under irradiation and found enhanced sulfate production over pure NaCl droplets, attributable to photosensitization induced by constituents in IS. Low relative humidity and high light intensity facilitated sulfate formation and increased the SO2 uptake coefficient by IS-NaCl particles. Aging of the IS particles further enhanced sulfate production, attributable to the enhanced secondary oxidant production promoted by increased proportions of nitrogen-containing CHN and oxygen- and nitrogen-containing CHON species under light and air. Experiments using model compounds of syringaldehyde, pyrazine, and 4-nitroguaiacol verified the enhancements of CHN and CHON species in sulfate formation. This work provides experimental evidence of enhanced sulfate production in laboratory-generated IS-NaCl droplets via enhanced secondary oxidant production triggered by photosensitization in multiphase oxidation processes under light and air. Our results can shed light on the possible interactions between sea salt and biomass burning aerosols in enhancing sulfate production.

Dithiothreitol-Measured Oxidative Potential of Reference Materials of Mineral Dust: Implications for the Toxicity of Mineral Dust Aerosols in the Atmosphere

Oxidative stress is a mechanism that might raise the toxicity of mineral dust aerosols. We evaluated the oxidative potential (OP) of four reference materials (RMs) of mineral dusts using dithiothreitol assay. The OP of the water-soluble fraction of the dust RMs accounts for 40%-70% of the OP of the total fraction. The values of total and water-soluble OP normalized by the surface area of insoluble particles showed agreement among the different dust RMs. The surface area of insoluble dust particles was therefore inferred as an important factor affecting the OP of mineral dust. Using the relation between total OP and the surface area of insoluble particles of the dust RMs, we estimated the total OPs of fine and coarse atmospheric mineral dust aerosols assuming a typical particle size distribution of Asian dust aerosols observed in Japan. Mass-normalized total OPs were estimated at 44 and 23 pmol min-1 μg-1 for fine and coarse atmospheric mineral dust particles. They closely approximate the values observed for urban aerosols in Japan, which suggests that mineral dust plume advection can lead to a marked increase in human exposure to redox-active aerosols, even far downwind from mineral dust source regions.

Triple-Barrel Ultramicroelectrodes for Multipurpose, Submilliliter Electroanalysis

Here, we have developed and applied a triple-barrel microelectrode. This device incorporates a platinum disk working electrode, a platinum disk counter electrode, and a low-leakage Ag/AgCl reference electrode into a small probe. We demonstrate that the incorporated low-leakage reference electrode shows similar voltammetry, potentiometry, and drift when compared to a commercial reference electrode in bulk solution. We also demonstrate the versatility of such a small three-channel system via voltammetry in nanoliter droplets and through electroanalysis of captured aerosols. Finally, we demonstrate the probe's potential utility in single-cell electroanalysis by making measurements within salmon eggs.

Representativeness of the particulate matter pollution assessed by an official monitoring station of air quality in Santiago, Chile: projection to human health

Santiago, capital city of Chile, presents air pollution problems for decades mainly by particulate matter, which significantly affects population health, despite national authority efforts to improve air quality. Different properties of the particulate matter (PM₁₀, PM_2.5 and PM₁ fractions, particle surface and number) were measured with an optical spectrometer. The sampling was done during spring 2019 at different sites within the official representative area of Independencia monitoring station (ORMS-IS). The results of this study evidence large variations in PM mass concentration at small-scale areas within the ORMS-IS representative zone, which reports the same value for the total area. Results from PM properties such as PM₁, particle number and particle surface distribution show that these properties should be incorporated in regular monitoring in order to improve the understanding of the effects of these factors on human health. The use of urban-climate canopy-layer models in a portion of the sampled area around the monitoring station demonstrates the influence of street geometry, building densities and vegetation covers on wind velocity and direction. These factors, consequently, have an effect on the potential for air pollutants concentrations. The results of this study evidence the existence of hot spots of PM pollution within the area of representativeness of the ORMS-IS. This result is relevant from the point of view of human health and contributes to improve the effectiveness of emission reduction policies.

Assessing oxidative stress induction ability and oxidative potential of PM2.5 in cities in eastern and western Japan

Oxidative stress is an important cause of respiratory diseases associated with exposure to PM_2.5. Accordingly, acellular methods for assessing the oxidative potential (OP) of PM_2.5 have been evaluated extensively for use as indicators of oxidative stress in living organisms. However, OP-based assessments only reflect the physicochemical properties of particles and do not consider particle-cell interactions. Therefore, to determine the potency of OP under various PM_2.5 scenarios, oxidative stress induction ability (OSIA) assessments were performed using a cell-based method, the heme oxygenase-1 (HO-1) assay, and the findings were compared with OP measurements obtained using an acellular method, the dithiothreitol assay. For these assays, PM_2.5 filter samples were collected in two cities in Japan. To quantitatively determine the relative contribution of the quantity of metals and subtypes of organic aerosols (OA) in PM_2.5 to the OSIA and the OP, online measurements and offline chemical analysis were also performed. The findings showed a positive relationship between the OSIA and OP for water-extracted samples, confirming that the OP is generally well suited for use as an indicator of the OSIA. However, the correspondence between the two assays differed for samples with a high water-soluble (WS)-Pb content, which had a higher OSIA than would be expected from the OP of other samples. The results of reagent-solution experiments showed that the WS-Pb induced the OSIA, but not the OP, in 15-min reactions, suggesting a reason for the inconsistent relationship between the two assays across samples. Multiple linear regression analyses and reagent-solution experiments showed that WS transition metals and biomass burning OA accounted for approximately 30-40% and 50% of the total OSIA or the total OP of water-extracted PM_2.5 samples, respectively. This is the first study to evaluate the association between cellular oxidative stress assessed by the HO-1 assay and the different subtypes of OA.

Characterizing atmospheric biological aerosols at a suburban site in Guangzhou, southern China by airborne microbes, proteins and saccharides

Bioaerosols in ambient environment can be evaluated using various techniques. However, the results of bioaerosols obtained using different methods are rarely compared. The relationships between different bioaerosol indicators and their behaviors under the influence of environment factors are seldom investigated. Here we used airborne microbial numbers, proteins and saccharides concentrations as the indicators to characterize bioaerosols in two seasons with different source contribution, air pollution situation and meteorological conditions. The observation was conducted at a suburban site in Guangzhou, southern China, during the winter and spring periods of 2021. Airborne microbes were observed with an average of (1.82 ± 1.33) × 10⁶ cells/m³, converted to the mass concentration level of 0.42 ± 0.30 μg/m³, comparable but lower than that of proteins (0.81 ± 0.48 μg/m³). Both of them were much higher than the average concentration of saccharides (19.93 ± 11.53 ng/m³). During the winter period, significant and good correlations were observed between the three components. In spring, a biological outbreak was observed in late March with a strong elevation of airborne microbes followed by elevations of proteins and saccharides. The retardation of proteins and saccharides could be the result of the enhanced release from microorganisms under the influence of atmospheric oxidation processes. Saccharides in PM_2.5 were studied to reveal the contribution of specific sources of bioaerosols (e.g. fungi, pollen, plants and soil). Our results show that primary emissions and secondary processes should play their roles in the variations of these biological components. By comparing the results of the three methods, this study provides an insight into the applicability and variability of bioaerosols characterization in the ambient environment with respect to various influences of sources, atmospheric processes and environmental conditions.

Brown Coal and Logwood Combustion in a Modern Heating Appliance: The Impact of Combustion Quality and Fuel on Organic Aerosol Composition

Residential heating with solid fuels is one of the major drivers for poor air quality in Central and Eastern Europe, and coal is still one of the major fuels in countries, such as Poland, the Czech Republic, and Hungary. In this work, emissions from a single-room heater fueled with brown coal briquettes (BCBs) and spruce logs (SLs) were analyzed for signatures of inorganic as well as semivolatile aromatic and low-volatile organic constituents. High variations in organic carbon (OC) emissions of BCB emissions, ranging from 5 to 22 mg MJ^-1, were associated to variations in carbon monoxide (CO) emissions, ranging from 900 to 1900 mg MJ^-1. Residential BCB combustion turned out to be an equally important source of levoglucosan, an established biomass burning marker, as spruce logwood combustion, but showed distinct higher ratios to manosan and galactosan. Signatures of polycyclic aromatic hydrocarbons emitted by BCB combustion exhibited defunctionalization and desubstitution with increasing combustion quality. Lastly, the concept of island and archipelago structural motifs adapted from petroleomics is used to describe the fraction low-volatile organic compounds in particulate emissions, where a transition from archipelago to island motifs in relation with decreasing CO emissions was observed in BCB emissions, while emissions from SL combustion exhibited the island motif.

Spontaneous dark formation of OH radicals at the interface of aqueous atmospheric droplets

Hydroxyl radical (OH) is a key oxidant that triggers atmospheric oxidation chemistry in both gas and aqueous phases. The current understanding of its aqueous sources is mainly based on known bulk (photo)chemical processes, uptake from gaseous OH, or related to interfacial O3 and NO3 radical-driven chemistry. Here, we present experimental evidence that OH radicals are spontaneously produced at the air-water interface of aqueous droplets in the dark and the absence of known precursors, possibly due to the strong electric field that forms at such interfaces. The measured OH production rates in atmospherically relevant droplets are comparable to or significantly higher than those from known aqueous bulk sources, especially in the dark. As aqueous droplets are ubiquitous in the troposphere, this interfacial source of OH radicals should significantly impact atmospheric multiphase oxidation chemistry, with substantial implications on air quality, climate, and health.

Monitoring and apportioning sources of indoor air quality using low-cost particulate matter sensors

Air quality is one of the most important factors in public health. While outdoor air quality is widely studied, the indoor environment has been less scrutinised, even though time spent indoors is typically much greater than outdoors. The emergence of low-cost sensors can help assess indoor air quality. This study provides a new methodology, utilizing low-cost sensors and source apportionment techniques, to understand the relative importance of indoor and outdoor air pollution sources upon indoor air quality. The methodology is tested with three sensors placed in different rooms inside an exemplar house (bedroom, kitchen and office) and one outdoors. When the family was present, the bedroom had the highest average concentrations for PM_2.5 and PM₁₀ (3.9 ± 6.8 ug/m³ and 9.6 ± 12.7 μg/m³ respectively), due to the activities undertaken there and the presence of softer furniture and carpeting. The kitchen, while presenting the lowest PM concentrations for both size ranges (2.8 ± 5.9 ug/m³ and 4.2 ± 6.9 μg/m³ respectively), presented the highest PM spikes, especially during cooking times. Increased ventilation in the office resulted in the highest PM₁ concentration (1.6 ± 1.9 μg/m³), highlighting the strong effect of infiltration of outdoor air for the smallest particles. Source apportionment, via positive matrix factorisation (PMF), showed that up to 95 % of the PM₁ was found to be of outdoor sources in all the rooms. This effect was reduced as particle size increased, with outdoor sources contributing >65 % of the PM_2.5, and up to 50 % of the PM₁₀, depending on the room studied. The new approach to elucidate the contributions of different sources to total indoor air pollution exposure, described in this paper, is easily scalable and translatable to different indoor locations.

Autoxidation Mechanism and Kinetics of Methacrolein in the Atmosphere

Elucidating the autoxidation of volatile organic compounds (VOCs) is crucial to understanding the formation mechanism of secondary organic aerosols, but it has been proven to be challenging due to the complexity of reactions under atmospheric conditions. Here, we report a comprehensive theoretical study of atmospheric autoxidation in VOCs exemplified by the atmospherically important methacrolein (MACR), a major oxidation product of isoprene. The results indicate that the Cl-adducts and H-abstraction products of MACR readily react with O₂ and undergo subsequent isomerizations via H-shift and cyclization, forming a large variety of lowly and highly oxygenated organic molecules. In particular, the first- and third-generation oxidation products derived from the Cl-adducts and the methyl-H-abstraction complexes are dominated in the atmospheric autoxidation, for which the fractional yields are remarkably affected by the NO concentration. The present findings have important implications for a systematical understanding of the oxidation processes of isoprene-derived compounds in the atmospheric environments.

Optical trapping and light scattering in atmospheric aerosol science

Aerosol particles are ubiquitous in the atmosphere, and currently contribute a large uncertainty to climate models. Part of the endeavour to reduce this uncertainty takes the form of improving our understanding of aerosol at the microphysical level, thus enabling chemical and physical processes to be more accurately represented in larger scale models. In addition to modeling efforts, there is a need to develop new instruments and methodologies to interrogate the physicochemical properties of aerosol. This perspective presents the development, theory, and application of optical trapping, a powerful tool for single particle investigations of aerosol. After providing an overview of the role of aerosol in Earth's atmosphere and the microphysics of these particles, we present a brief history of optical trapping and a more detailed look at its application to aerosol particles. We also compare optical trapping to other single particle techniques. Understanding the interaction of light with single particles is essential for interpreting experimental measurements. In the final part of this perspective, we provide the relevant formalism for understanding both elastic and inelastic light scattering for single particles. The developments discussed here go beyond Mie theory and include both how particle and beam shape affect spectra. Throughout the entirety of this work, we highlight numerous references and examples, mostly from the last decade, of the application of optical trapping to systems that are relevant to the atmospheric aerosol.

Evidence of aircraft activity impact on local air quality: A study in the context of uncommon airport operation

Wuhan Tianhe International Airport (WUH) was suspended to contain the spread of COVID-19, while Shanghai Hongqiao International Airport (SHA) saw a tremendous flight reduction. Closure of a major international airport is extremely rare and thus represents a unique opportunity to straightforwardly observe the impact of airport emissions on local air quality. In this study, a series of statistical tools were applied to analyze the variations in air pollutant levels in the vicinity of WUH and SHA. The results of bivariate polar plots show that airport SHA and WUH are a major source of nitrogen oxides. NO_x, NO₂ and NO diminished by 55.8%, 44.1%, 76.9%, and 40.4%, 33.3% and 59.4% during the COVID-19 lockdown compared to those in the same period of 2018 and 2019, under a reduction in aircraft activities by 58.6% and 61.4%. The concentration of NO₂, SO₂ and PM_2.5 decreased by 77.3%, 8.2%, 29.5%, right after the closure of airport WUH on 23 January 2020. The average concentrations of NO, NO₂ and NO_x scatter plots at downwind of SHA after the lockdown were 78.0%, 47.9%, 57.4% and 62.3%, 34.8%, 41.8% lower than those during the same period in 2018 and 2019. However, a significant increase in O₃ levels by 50.0% and 25.9% at WUH and SHA was observed, respectively. These results evidently show decreased nitrogen oxides concentrations in the airport vicinity due to reduced aircraft activities, while amplified O₃ pollution due to a lower titration by NO under strong reduction in NO_x emissions.

Vehicle cabin air quality: influence of air recirculation on energy use, particles, and CO2

In this study, simulations were performed to investigate the influence of different vehicle climate ventilation strategies, mainly the air recirculation (REC) degree, on the cabin air quality and climate system power. The focus of air quality is on the cabin particle concentrations including PM2.5 (particles of aerodynamic diameter less than 2.5 μm), UFP (ultrafine particles of aerodynamic diameter less than 100 nm), and cabin CO2 concentration. Three outside climates (cold, intermediate, and warm) and three outside particle concentrations are studied. The studied vehicle originally shows possibilities to meet WHO PM2.5 guideline of 15 μg/m3 with a new filter. The aged filter have reduced performance, especially when outside concentration is high. Increased REC shows advantages in all the three climates in reducing particles and climate power for the studied vehicle. Application of 70% REC (70% of ventilation air is recirculated air) on average lowers PM2.5 by 55% and 39% for a new and aged filter, respectively. 70% REC with a new filter reduces cabin PM2.5 below guideline of 15 μg/m3 in all conditions. The reduction of UFP counts results are generally similar to that of PM2.5. Increased REC also lessens the average climate system power by up to 27% on average. When REC is increased, the cabin CO2 concentration arises accordingly, and the magnitude is relevant to the passengers. In all studied conditions with 1 passenger, 70% REC does not increase CO2 above the common guideline of 1000 ppm. 70% REC is not recommended with more than 1 passengers in cold and intermediate climate and 2 passengers in warm climate. Besides, to avoid the potential windscreen fog risk in cold climate, REC should be avoided when passengers are more than 3. Except for constant REC values, a sample study investigates a dynamic control of the REC. It shows the possibility of continuously optimizing REC to reduce the climate power and particles, while maintaining the CO2 concentration below 1000 ppm. In warm climate with 1 passenger boarded, the average optimized REC is 90%, which in comparison with base case lead to 44% PM2.5 reduction and 12% climate power reduction.

A high-precision aerosol retrieval algorithm for FY-3D MERSI-II images

The Medium Resolution Spectral Imager-II (MERSI-II) onboard the recently launched Chinese Fengyun-3D (FY-3D) satellite has great capability in detecting global aerosols as it includes aerosol bands similar to Moderate Resolution Imaging Spectroradiometer (MODIS). However, to date, aerosol retrieval based on MERSI-II is still limited to dark target regions and there is no official aerosol products for the MERSI-II. This study focuses on developing a high-precision algorithm to retrieve aerosol optical depth (AOD) suitable for entire land areas (except snow/ice and inland waters) based on MERSI-II measurements. Considering both the accuracy and retrieval efficiency, a new cost function is constructed based on (1) the fact that the AOD (550 nm) retrieved independently from different bands should be the same with the correct aerosol model, and (2) the assumption that the aerosol types are the same in the 5 × 5 km spatial range. The retrieval method based on the new cost function is nearly 50 times faster than most current methods using iterative calculations. To extend the application adaption of the FY-3D MERSI-II AOD retrieval and avoid the errors caused by the surface Lambertian hypothesis, a bidirectional reflectance distribution function (BRDF) database is built using MODIS products. Eight candidate aerosol models in different natural zones of China are constructed based on AERONET aerosol products from 2010 - 2021. The new method is applied to MERSI-II images over China and validated against ground-based measurements at 14 stations from 2020 to 2021. MODIS aerosol products from three operational algorithms are also used for comparison purposes. The results show that MERSI-II AOD retrievals agree well with the ground-based measurements with correlation coefficient (R), root mean square error (RMSE), and relative mean bias (RMB) of 0.913, 0.123, and 0.955, respectively. In addition, 72.19 % of AOD matchups fall within the expected error (EE) envelopes. The MERSI-II retrievals show higher accuracy than that of MODIS dark target (DT) and deep blue (DB) products and comparable accuracy of the MODIS Multi-Angle Implementation of Atmospheric Correction (MAIAC) product. MERSI-II AOD also shows higher stability in terms of spatial and temporal and better performance under heavy aerosol loading conditions than MODIS products. A good AOD agreement with R from 0.777 to 0.863 between MERSI-II and MODIS products is found over the land of China. The new method showing high retrieval efficiency and accuracy has great potential to be operationally applied on AOD retrieval for MERSI-II.

PFAS on atmospheric aerosol particles: a review

Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants of concern to human health. These synthetic chemicals are in widespread use for consumer products, firefighting foams, and industrial applications. They have been detected all over the globe, including at remote locations distant from any possible point sources. One mechanism for long-range transport of PFAS is through sorption to aerosol particles in the atmosphere. PFAS can be transferred from the sea surface to sea spray aerosol particles through wave breaking and bubble bursting, and PFAS emitted to the atmosphere in the gas phase can sorb to particulate matter through gas-particle partitioning. Here we present a comprehensive review of global measurements of PFAS on ambient particulate matter dating back to the first reports from the early 2000s. We summarize findings for the historically important C8 species, perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), including detection of isomers and size-segregated measurements, as well as studies of newer and emerging PFAS. We conclude that long-term monitoring of PFAS on particulate matter should be expanded to include more measurement sites in under-sampled regions of the world and that further non-targeted work to identify novel PFAS structures is needed as PFAS manufacturing and regulations continue to evolve.

A perspective on iron (Fe) in the atmosphere: air quality, climate, and the ocean

As scientists engage in research motivated by climate change and the impacts of pollution on air, water, and human health, we increasingly recognize the need for the scientific community to improve communication and knowledge exchange across disciplines to address pressing and outstanding research questions holistically. Our professional paths have crossed because our research activities focus on the chemical reactivity of Fe-containing minerals in air and water, and at the air-sea interface. (Photo)chemical reactions driven by Fe can take place at the surface of the particles/droplets or within the condensed phase. The extent and rates of these reactions are influenced by water content and biogeochemical activity ubiquitous in these systems. One of these reactions is the production of reactive oxygen species (ROS) that cause damage to respiratory organs. Another is that the reactivity of Fe and organics in aerosol particles alter surficial physicochemical properties that impact aerosol-radiation and aerosol-cloud interactions. Also, upon deposition, aerosol particles influence ocean biogeochemical processes because micronutrients such as Fe or toxic elements such as copper become bioavailable. We provide a perspective on these topics and future research directions on the reactivity of Fe in atmospheric aerosol systems, from sources to short- and long-term impacts at the sinks with emphasis on needs to enhance the predictive power of atmospheric and ocean models.

Outdoor Air Pollution and Childhood Respiratory Disease: The Role of Oxidative Stress

The leading mechanisms through which air pollutants exert their damaging effects are the promotion of oxidative stress, the induction of an inflammatory response, and the deregulation of the immune system by reducing its ability to limit infectious agents' spreading. This influence starts in the prenatal age and continues during childhood, the most susceptible period of life, due to a lower efficiency of oxidative damage detoxification, a higher metabolic and breathing rate, and enhanced oxygen consumption per unit of body mass. Air pollution is involved in acute disorders like asthma exacerbations and upper and lower respiratory infections, including bronchiolitis, tuberculosis, and pneumoniae. Pollutants can also contribute to the onset of chronic asthma, and they can lead to a deficit in lung function and growth, long-term respiratory damage, and eventually chronic respiratory illness. Air pollution abatement policies, applied in the last decades, are contributing to mitigating air quality issues, but more efforts should be encouraged to improve acute childhood respiratory disease with possible positive long-term effects on lung function. This narrative review aims to summarize the most recent studies on the links between air pollution and childhood respiratory illness.

Evaluating important analytical figures of merit for PILSNER: particle-into-liquid sampling for nanoliter electrochemical reactions

Recently introduced as a method for aerosol electroanalysis, particle-into-liquid sampling for nanoliter electrochemical reactions (PILSNER) has shown promise as a versatile, highly sensitive analytical technique. To further validate the analytical figures of merit, we present correlated fluorescence microscopy and electrochemical data. The results show excellent agreement as to the detected concentration of a common redox mediator, ferrocyanide. Experimental data also suggest that PILSNER's unconventional two-electrode system is not a contributing source of error when appropriate controls are established. Finally, we address the concern that arises from two electrodes operating within such close proximity. COMSOL Multiphysics simulations confirm that with the present parameters, positive feedback is not a contributing source of error in voltammetric experiments. The simulations also show at what distances feedback could become a source of concern, which will be a factor in future investigations. Thus, this paper provides validation of PILSNER's analytical figures of merit, as well as voltammetric controls and COMSOL Multiphysics simulations to address possible confounding factors that could arise from PILSNER's experimental setup.

Impact of air pollution on ischemic heart disease: Evidence, mechanisms, clinical perspectives

Ambient air pollution, and especially particulate matter (PM) air pollution <2.5 μm in diameter (PM_2.5), has clearly emerged as an important yet often overlooked risk factor for atherosclerosis and ischemic heart disease (IHD). In this review, we examine the available evidence demonstrating how acute and chronic PM_2.5 exposure clinically translates into a heightened coronary atherosclerotic burden and an increased risk of acute ischemic coronary events. Moreover, we provide insights into the pathophysiologic mechanisms underlying PM_2.5-mediated atherosclerosis, focusing on the specific biological mechanism through which PM_2.5 exerts its detrimental effects. Further, we discuss about the possible mechanisms that explain the recent findings reporting a strong association between severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, increased PM_2.5 exposure, and morbidity and mortality from IHD. We also address the possible mitigation strategies that should be implemented to reduce the impact of PM_2.5 on cardiovascular morbidity and mortality, and underscoring the strong need of clinical trials demonstrating the efficacy of specific interventions (including both PM_2.5 reduction and/or specific drugs) in reducing the incidence of IHD. Finally, we introduce the emerging concept of the exposome, highlighting the close relationship between PM_2.5 and other environmental exposures (i.e.: traffic noise and climate change) in terms of common underlying pathophysiologic mechanisms and possible mitigation strategies.

Near-source hypochlorous acid emissions from indoor bleach cleaning

Cleaning surfaces with sodium hypochlorite (NaOCl) bleach can lead to high levels of gaseous chlorine (Cl₂) and hypochlorous acid (HOCl); these have high oxidative capacities and are linked to respiratory issues. We developed a novel spectral analysis procedure for a cavity ring-down spectroscopy (CRDS) hydrogen peroxide (H₂O₂) analyzer to enable time-resolved (3 s) HOCl quantification. We measured HOCl levels in a residential bathroom while disinfecting a bathtub and sink, with a focus on spatial and temporal trends to improve our understanding of exposure risks during bleach use. Very high (>10 ppmv) HOCl levels were detected near the bathtub, with lower levels detected further away. Hypochlorous acid concentrations plateaued in the room at a level that depended on distance from the bathtub. This steady-state concentration was maintained until the product was removed by rinsing. Mobile experiments with the analyzer inlet secured to the researcher's face were conducted to mimic potential human exposure to bleach emissions. The findings from mobile experiments were consistent with the spatial and temporal trends observed in the experiments with fixed inlet locations. This work provides insight on effective strategies to reduce exposure risk to emissions from bleach and other cleaning products.

Linking Cell Health and Reactive Oxygen Species from Secondary Organic Aerosols Exposure

Oxidative stress is a possible mechanism by which ambient fine particulate matter (PM) exerts adverse biological effects. While multiple biological effects and reactive oxygen species (ROS) production have been observed upon PM exposure, whether the biological effects are ROS-mediated remains unclear. Secondary organic aerosols (SOA) constitute a major fraction of fine PM and can contribute substantially to its toxicity. In this work, we measured three types of cell responses (mitochondrial membrane potential (MMP), caspase 3/7 activity, and ROS) and investigated their associations upon exposure to SOA formed from anthropogenic (naphthalene) and biogenic (α-pinene) precursors. MMP and caspase 3/7 activity (an early indicator of apoptosis) are key indicators of cell health, and changes of them could occur downstream of ROS-mediated pathways. We observed a significant increase in caspase 3/7 activity after SOA exposure, suggesting that apoptosis is an important pathway of cell death induced by SOA. We further found strong associations between a decrease in MMP and increase in caspase 3/7 activity with an increase in cellular ROS level. These results suggest that cell health is largely dependent on the cellular ROS level, highlighting oxidative stress as a key mechanism for biological effects from SOA exposure. Linear regression analyses reveal greater changes of the three cellular responses with increasing carbon oxidation state (OSc) of SOA, suggesting that SOA are more toxic when they are more oxidized. Overall, our work provides critical insights into the associations between cell health and ROS level upon SOA exposure and proposes that OSc could be a suitable proxy to assess the overall SOA toxicity.

Consistency and Discrepancy between Visibility and PM2.5 Measurements: Potential Application of Visibility Observation to Air Quality Study

High-quality measurements of air quality are the highest priority for understanding widespread air pollution. Visibility has been widely suggested to be a good alternative to PM2.5 concentration as a measure. In this study, the similarities and differences between visibility and PM2.5 measurements in China are checked and the results reveal the potential application of visibility observation to the study of air quality. Based on the quality-controlled PM2.5 and visibility data from 2016 to 2018, the nonparametric Spearman correlation coefficient (ρ) values between stations for PM2.5 and visibility-derived surface extinction coefficient (bext) decrease as the station distance (R) increases. Some relatively low ρ values (<0.4) occur in regions characterized by the lowest (background) levels of PM2.5 and bext values, for example, the Tibetan and Yungui Plateau. The relatively lower ρ for bext compared to PM2.5 is probably caused by the predefined maximum threshold of visibility measurements (generally 30 km). A significant correlation between PM2.5 and bext is derived in most stations and relatively larger ρ values are evident in eastern China (Northeast China excluded) and in winter (the national median ρ is 0.67). The abrupt changes in specific mass extinction efficiency (αext) imply a potentially large influence of alternation of visibility sensors or recalibrations on visibility measurements. The bext data are thereafter corrected by comparison to the reference measurements at the adjacent stations, which leads to a three-year quality assured of visibility and bext datasets.

Organic Peroxides in Aerosol: Key Reactive Intermediates for Multiphase Processes in the Atmosphere

Organic peroxides (POs) are organic molecules with one or more peroxide (-O-O-) functional groups. POs are commonly regarded as chemically labile termination products from gas-phase radical chemistry and therefore serve as temporary reservoirs for oxidative radicals (HOx and ROx) in the atmosphere. Owing to their ubiquity, active gas-particle partitioning behavior, and reactivity, POs are key reactive intermediates in atmospheric multiphase processes determining the life cycle (formation, growth, and aging), climate, and health impacts of aerosol. However, there remain substantial gaps in the origin, molecular diversity, and fate of POs due to their complex nature and dynamic behavior. Here, we summarize the current understanding on atmospheric POs, with a focus on their identification and quantification, state-of-the-art analytical developments, molecular-level formation mechanisms, multiphase chemical transformation pathways, as well as environmental and health impacts. We find that interactions with SO2 and transition metal ions are generally the fast PO transformation pathways in atmospheric liquid water, with lifetimes estimated to be minutes to hours, while hydrolysis is particularly important for α-substituted hydroperoxides. Meanwhile, photolysis and thermolysis are likely minor sinks for POs. These multiphase PO transformation pathways are distinctly different from their gas-phase fates, such as photolysis and reaction with OH radicals, which highlights the need to understand the multiphase partitioning of POs. By summarizing the current advances and remaining challenges for the investigation of POs, we propose future research priorities regarding their origin, fate, and impacts in the atmosphere.

Dynamic Wood Smoke Aerosol Toxicity during Oxidative Atmospheric Aging

Wildfires are a major source of biomass burning aerosol to the atmosphere, with their incidence and intensity expected to increase in a warmer future climate. However, the toxicity evolution of biomass burning organic aerosol (BBOA) during atmospheric aging remains poorly understood. In this study, we report a unique set of chemical and toxicological metrics of BBOA from pine wood smoldering during multiphase aging by gas-phase hydroxyl radicals (OH). Both the fresh and OH-aged BBOA show activity relevant to adverse health outcomes. The results from two acellular assays (DTT and DCFH) show significant oxidative potential (OP) and reactive oxygen species (ROS) formation in OH-aged BBOA. Also, radical concentrations in the aerosol assessed by electron paramagnetic resonance (EPR) spectroscopy increased by 50% following heterogeneous aging. This enhancement was accompanied by a transition from predominantly carbon-centered radicals (85%) in the fresh aerosol to predominantly oxygen-centered radicals (76%) following aging. Both the fresh and aged biomass burning aerosols trigger prominent antioxidant defense during the in vitro exposure, indicating the induction of oxidative stress by BBOA in the atmosphere. By connecting chemical composition and toxicity using an integrated approach, we show that short-term aging initiated by OH radicals can produce biomass burning particles with a higher particle-bound ROS generation capacity, which are therefore a more relevant exposure hazard for residents in large population centers close to wildfire regions than previously studied fresh biomass burning emissions.

Toxicological effects of fresh and aged gasoline exhaust particles in Hong Kong

Exhaust emissions from gasoline vehicles are one of the major contributors to aerosol particles observed in urban areas. It is well-known that these tiny particles are associated with air pollution, climate forcing, and adverse health effects. However, their toxicity and bioreactivity after atmospheric ageing are less constrained. The aim of the present study was to investigate the chemical and toxicological properties of fresh and aged particulate matter samples derived from gasoline exhaust emissions. Chemical analyses showed that both fresh and aged PM samples were rich in organic carbon, and the dominating chemical species were n-alkane and polycyclic aromatic hydrocarbons. Comparisons between fresh and aged samples revealed that the latter contained larger amounts of oxygenated compounds. In most cases, the bioreactivity induced by the aged PM samples was significantly higher than that induced by the fresh samples. Moderate to weak correlations were identified between chemical species and the levels of biomarkers in the fresh and aged PM samples. The results of the stepwise regression analysis suggested that n-alkane and alkenoic acid were major contributors to the increase in lactate dehydrogenase (LDH) levels in the fresh samples, while polycyclic aromatic hydrocarbons (PAHs) and monocarboxylic acid were the main factors responsible for such increase in the aged samples.

Diesel exhaust PM2.5 greatly deteriorates fibrosis process in pre-existing pulmonary fibrosis via ferroptosis

Fine particulate matter (PM2.5) has been widely reported to contribute to the pathogenesis of pulmonary diseases. The direct hazardous effect of PM2.5 on the respiratory system at high concentrations in vitro and in vivo have been well identified. However, its effect on the pre-existing respiratory diseases of patients at environment-related concentrations remains unclear. Diesel exhaust PM2.5 as a primary representative of ambient PM2.5 fine particles were used to investigated the effect of PM2.5 on the fibrosis progression of existing pulmonary fibrosis disease models. This study reported that PM2.5 could result in the enhanced sensitivity to fibrotic response, which may be ascribed to ferroptosis induced by PM2.5 in damaged lung areas. Proteomic analysis revealed that the upregulation of HO-1 as a key mechanism in the ferroptosis and exacerbation of pulmonary fibrosis induced by PM2.5. As a result, HO-1 degraded heme-containing protein and released iron in fibrotic cells, leading to generation of mitochondrial ROS and impaired mitochondrial function. Transmission electron microscopic assay verified that PM2.5 entered the mitochondria of fibrotic cells and was accompanied by significant mitochondrial morphological changes characterized by increased mitochondrial membrane density and reduced mitochondrial size. The HO-1 inhibitor zinc protoporphyrin and mitochondrion-targeted antioxidant Mito-TEMPO significantly attenuated PM2.5-induced ferroptosis and exacerbation of fibrosis. In addition, AMPK-ULK1 axis-triggered autophagy activation and NCOA4-mediated degradation of ferritin by autophagy were found to be related to the PM2.5-induced ferroptosis of fibrotic cells. As evidenced by the inhibition of autophagy with 3-methyladenine or AMPK inhibitor, NCOA4 knockdown decreased intracellular iron accumulation and lipid peroxidation, thereby relieving PM2.5-induced epithelial-mesenchymal transition and cell death in fibrotic cells. Overall, this study provided experimental support for the idea that PM2.5 greatly deteriorates fibrosis process in pre-existing pulmonary fibrosis, and HO-1-mediated mitochondrial dysfunction and NCOA4-mediated ferritinophagy are jointly required for the PM2.5-induced ferroptosis and enhanced fibrosis effects.

Highly Acidic Conditions Drastically Alter the Chemical Composition and Absorption Coefficient of α-Pinene Secondary Organic Aerosol

Secondary organic aerosols (SOA), formed through the gas-phase oxidation of volatile organic compounds (VOCs), can reside in the atmosphere for many days. The formation of SOA takes place rapidly within hours after VOC emissions, but SOA can undergo much slower physical and chemical processes throughout their lifetime in the atmosphere. The acidity of atmospheric aerosols spans a wide range, with the most acidic particles having negative pH values, which can promote acid-catalyzed reactions. The goal of this work is to elucidate poorly understood mechanisms and rates of acid-catalyzed aging of mixtures of representative SOA compounds. SOA were generated by the ozonolysis of α-pinene in a continuous flow reactor and then collected using a foil substrate. SOA samples were extracted and aged by exposure to varying concentrations of aqueous H₂SO₄ for 1-2 days. Chemical analysis of fresh and aged samples was conducted using ultra-performance liquid chromatography coupled with photodiode array spectrophotomety and high-resolution mass spectrometry. In addition, UV-vis spectrophotometry and fluorescence spectrophotometry were used to examine the changes in optical properties before and after aging. We observed that SOA that aged in moderately acidic conditions (pH from 0 to 4) experienced small changes in composition, while SOA that aged in a highly acidic environment (pH from -1 to 0) experienced more dramatic changes in composition, including the formation of compounds containing sulfur. Additionally, at highly acidic conditions, light-absorbing and fluorescent compounds appeared, but their identities could not be ascertained due to their small relative abundance. This study shows that acidity is a major driver of SOA aging, resulting in a large change in the chemical composition and optical properties of aerosols in regions where high concentrations of H₂SO₄ persist, such as upper troposphere and lower stratosphere.

Ozonolysis of α-Pinene and Δ3-Carene Mixtures: Formation of Dimers with Two Precursors

The formation of secondary organic aerosol (SOA) from the structurally similar monoterpenes, α-pinene and Δ³-carene, differs substantially. The aerosol phase is already complex for a single precursor, and when mixtures are oxidized, products, e.g., dimers, may form between different volatile organic compounds (VOCs). This work investigates whether differences in SOA formation and properties from the oxidation of individual monoterpenes persist when a mixture of the monoterpenes is oxidized. Ozonolysis of α-pinene, Δ³-carene, and a 1:1 mixture of them was performed in the Aarhus University Research on Aerosol (AURA) atmospheric simulation chamber. Here, ∼100 ppb of monoterpene was oxidized by 200 ppb O₃ under dark conditions at 20 °C. The particle number concentration and particle mass concentration for ozonolysis of α-pinene exceed those from ozonolysis of Δ³-carene alone, while their mixture results in concentrations similar to α-pinene ozonolysis. Detailed offline analysis reveals evidence of VOC-cross-product dimers in SOA from ozonolysis of the monoterpene mixture: a VOC-cross-product dimer likely composed of the monomeric units cis-caric acid and 10-hydroxy-pinonic acid and a VOC-cross-product dimer ester likely from the monomeric units caronaldehyde and terpenylic acid were tentatively identified by liquid chromatography-mass spectrometry. To improve the understanding of chemical mechanisms determining SOA, it is relevant to identify VOC-cross-products.

Superoxide Release by Macrophages through NADPH Oxidase Activation Dominating Chemistry by Isoprene Secondary Organic Aerosols and Quinones to Cause Oxidative Damage on Membranes

Oxidative stress mediated by reactive oxygen species (ROS) is a key process for adverse aerosol health effects. Secondary organic aerosols (SOA) account for a major fraction of fine particulate matter, and their inhalation and deposition into the respiratory tract causes the formation of ROS by chemical and cellular processes, but their relative contributions are hardly quantified and their link to oxidative stress remains uncertain. Here, we quantified cellular and chemical superoxide generation by 9,10-phenanthrenequinone (PQN) and isoprene SOA using a chemiluminescence assay combined with electron paramagnetic resonance spectroscopy as well as kinetic modeling. We also applied cellular imaging techniques to study the cellular mechanism of superoxide release and oxidative damage on cell membranes. We show that PQN and isoprene SOA activate NADPH oxidase in macrophages to release massive amounts of superoxide, overwhelming the superoxide formation by aqueous chemical reactions in the epithelial lining fluid. The activation dose for PQN is 2 orders of magnitude lower than that of isoprene SOA, suggesting that quinones are more toxic. While higher exposures trigger cellular antioxidant response elements, the released ROS induce oxidative damage to the cell membrane through lipid peroxidation. Such mechanistic and quantitative understandings provide a basis for further elucidation of adverse health effects and oxidative stress by fine particulate matter.

Diurnal trends of indoor and outdoor fluorescent biological aerosol particles in a tropical urban area

We evaluated diurnal trends of size-resolved indoor and outdoor fluorescent biological airborne particles (FBAPs) and their contributions to particulate matter (PM) within 0.5-20 μm. After a ten-week continuous sampling via two identical wideband integrated bioaerosol sensors, we found that both indoor and outdoor diurnal trends of PM were driven by its bioaerosol component. Outdoors, the median [interquartile range] FBAP mass concentration peaked at 8.2 [5.8-9.9] μg/m³ around sunrise and showed a downtrend from 6:00 to 18:00 during the daytime and an uptrend during the night. The nighttime FBAP level was 1.8 [1.4-2.2] times higher than that during the daytime, and FBAPs accounted for 45 % and 56 % of PM during daytime and nighttime, respectively. Indoors, the rise in concentrations of FBAPs smaller than 1 μm coincided with the starting operation of the heating, ventilation, and air conditioning (HVAC) system at 6:00, and the concentration peaked at 8:00 and dropped to the daily average by noontime. This indicated that the starting operation of the HVAC system dislodged the overnight settled and accumulated fine bioaerosols into the indoor environment. For particles larger than 1 μm, the variation of mass concentration was driven by occupancy. Based on regression modeling, the contributions of indoor PM, non-FBAP, and FBAP sources to indoor mass concentrations were estimated to be 93 %, 67 %, and 97 % during the occupied period.

Classification of Aggregates Using Multispectral Two-Dimensional Angular Light Scattering Simulations

Airborne particulate matter plays an important role in climate change and health impacts, and is generally irregularly shaped and/or forms agglomerates. These particles may be characterized through their light scattering signals. Two-dimensional angular scattering from such particles produce a speckle pattern that is influenced by their morphology (shape and material composition). In what follows, we revisit morphological descriptors obtained from computationally generated light scattering patterns from aggregates of spherical particles. These descriptors are used as inputs to a multivariate statistical algorithm and then classified via supervised machine learning algorithms. The classification results show improved accuracy over previous efforts and demonstrate the utility of the proposed morphological descriptors.

Effects of Nitrogen Oxides on the Production of Reactive Oxygen Species and Environmentally Persistent Free Radicals from α-Pinene and Naphthalene Secondary Organic Aerosols

Reactive oxygen species (ROS) and environmentally persistent free radicals (EPFR) play an important role in chemical transformation of atmospheric aerosols and adverse aerosol health effects. This study investigated the effects of nitrogen oxides (NO_x) during photooxidation of α-pinene and naphthalene on the EPFR content and ROS formation from secondary organic aerosols (SOA). Electron paramagnetic resonance (EPR) spectroscopy was applied to quantify EPFR content and ROS formation. While no EPFR were detected in α-pinene SOA, we found that naphthalene SOA contained about 0.7 pmol μg^-1 of EPFR, and NO_x has little influence on EPFR concentrations and oxidative potential. α-Pinene and naphthalene SOA generated under low NO_x conditions form OH radicals and superoxide in the aqueous phase, which was lowered substantially by 50-80% for SOA generated under high NO_x conditions. High-resolution mass spectrometry analysis showed the substantial formation of nitroaromatics and organic nitrates in a high NO_x environment. The modeling results using the GECKO-A model that simulates explicit gas-phase chemistry and the radical 2D-VBS model that treats autoxidation predicted reduced formation of hydroperoxides and enhanced formation of organic nitrates under high NO_x due to the reactions of peroxy radicals with NO_x instead of their reactions with HO₂. Consistently, the presence of NO_x resulted in the decrease of peroxide contents and oxidative potential of α-pinene SOA.

High fraction of soluble trace metals in fine particles under heavy haze in central China

Atmospheric trace metals are a key component of particulate matter and significantly influence the atmospheric process and human health. The dissolved fraction of trace metals represents their bioavailability and exhibits high chemical activity. However, the optimum measurement method for detecting the soluble fraction of trace metals is still undetermined. The impact of variations in pollution on the soluble fraction is largely unrevealed. Therefore, in this work, a one-month field observation was conducted in Central China and different extraction solvents were used to determine the proper measurement method for the soluble fraction of trace metals and investigate the variation pattern under different pollution conditions. The findings show that solvents with acidity near that of aerosol water can better reflect the actual soluble fraction of trace metals in fine particulate matter. The soluble fraction of trace metals tends to increase with pollution level increased, demonstrating unexpectedly high health risks and chemical activity under heavy haze conditions. Our results indicate that remediation and trace metal pollution control are urgently needed.

Inter-annual variability of source contributions to PM10, PM2.5, and oxidative potential in an urban background site in the central mediterranean

Airborne particulate matter (PM) is studied because of its effects on human health and climate change. PM long-term characterisation allows identifying trends and evaluating the outcomes of environmental protection policies. This work is aimed to study the inter-annual variability of PM_2.5 and PM₁₀ concentrations and chemical composition in an urban background site (Italy). A dataset of daily PM_2.5 and PM₁₀ was collected in the period 2016-2017, including the content of OC, EC, major water-soluble ions, main metals, and compared to a similar dataset collected in the period 2013-2014. Oxidative potential using DTT assay (dithiothreitol) was evaluated and expressed in DTT_V as 0.39 nmol/min·m³ in PM₁₀ and 0.29 in PM_2.5 nmol/min·m³. PM source apportionment was computed using the EPA PMF5.0 model and source contributions compared with those of a previous dataset collected between 2013 and 2014. Multi linear regression analysis identified which source contributed (p < 0.05) to the oxidative potential of each size fraction. Inter-annual trends were more evident on PM_2.5 with reductions of biomass burning contribution and increases in traffic contribution in the 2016-2017 period. Crustal contributions were similar for the two periods, in both size fractions. Carbonates were comparable in PM₁₀ with a slight increase in PM_2.5. Sea spray decreased in PM₁₀. The DTT_V of PM_2.5 peaked during cold periods, while, the DTT_V of the PM_10-2.5 fraction peaked in summer, suggesting that different sources, with different seasonality, influence OP in the PM_2.5 and PM_10-2.5 fractions. Analysis showed that sea spray, crustal, and carbonates sources contribute ∼13.6% to DTT_V in PM_2.5 and ∼62.4% to DTT_V in PM_10-2.5. Combustion sources (biomass burning and traffic) contribute to the majority of DTT_V (50.6%) in PM_2.5 and contribute for ∼26% to DTT_V in PM_10-2.5. Secondary nitrate contributes to DTT_V in both fine and coarse fraction; secondary sulphate contribute to DTT_V in PM_2.5 with negligible contributions to DTT_V in PM_10-2.5.

A scoping review on the health effects of smoke haze from vegetation and peatland fires in Southeast Asia: Issues with study approaches and interpretation

Smoke haze due to vegetation and peatland fires in Southeast Asia is a serious public health concern. Several approaches have been applied in previous studies; however, the concepts and interpretations of these approaches are poorly understood. In this scoping review, we addressed issues related to the application of epidemiology (EPI), health burden estimation (HBE), and health risk assessment (HRA) approaches, and discussed the interpretation of findings, and current research gaps. Most studies reported an air quality index exceeding the ‘unhealthy’ level, especially during smoke haze periods. Although smoke haze is a regional issue in Southeast Asia, studies on its related health effects have only been reported from several countries in the region. Each approach revealed increased health effects in a distinct manner: EPI studies reported excess mortality and morbidity during smoke haze compared to non-smoke haze periods; HBE studies estimated approximately 100,000 deaths attributable to smoke haze in the entire Southeast Asia considering all-cause mortality and all age groups, which ranged from 1,064–260,000 for specified mortality cause, age group, study area, and study period; HRA studies quantified potential lifetime cancer and non-cancer risks due to exposure to smoke-related chemicals. Currently, there is a lack of interconnection between these three approaches. The EPI approach requires extensive effort to investigate lifetime health effects, whereas the HRA approach needs to clarify the assumptions in exposure assessments to estimate lifetime health risks. The HBE approach allows the presentation of health impact in different scenarios, however, the risk functions used are derived from EPI studies from other regions. Two recent studies applied a combination of the EPI and HBE approaches to address uncertainty issues due to the selection of risk functions. In conclusion, all approaches revealed potential health risks due to smoke haze. Nonetheless, future studies should consider comparable exposure assessments to allow the integration of the three approaches.

Health risk assessment and source apportionment of PM2.5-bound toxic elements in the industrial city of Siheung, Korea

The emission sources and their health risks of fine particulate matter (PM_2.5) in Siheung, Republic of Korea, were investigated as a middle-sized industrial city. To identify the PM_2.5 sources with error estimation, a positive matrix factorization model was conducted using daily mean speciated data from November 16, 2019, to October 2, 2020 (95 samples, 22 chemical species). As a result, 10 sources were identified: secondary nitrate (24.3%), secondary sulfate (18.8%), traffic (18.8%), combustion for heating (12.6%), biomass burning (11.8%), coal combustion (3.6%), heavy oil industry (1.8%), smelting industry (4.0%), sea salts (2.7%), and soil (1.7%). Based on the source apportionment results, health risks by inhalation of PM_2.5 were assessed for each source using the concentration of toxic elements portioned. The estimated cumulative carcinogenic health risks from the coal combustion, heavy oil industry, and traffic sources exceeded the benchmark, 1E-06. Similarly, carcinogenic health risks from exposure to As and Cr exceeded 1E-05 and 1E-06, respectively, needing a risk reduction plan. The non-carcinogenic risk was smaller than the hazard index of one, implying low potential for adverse health effects. The probable locations of sources with relatively higher carcinogenic risks were tracked. In this study, health risk assessment was performed on the elements for which mass concentration and toxicity information were available; however, future research needs to reflect the toxicity of organic compounds, elemental carbon, and PM_2.5 itself.

Effects of Acidity on Reactive Oxygen Species Formation from Secondary Organic Aerosols

Reactive oxygen species (ROS) play a critical role in the chemical transformation of atmospheric secondary organic aerosols (SOA) and aerosol health effects by causing oxidative stress in vivo. Acidity is an important physicochemical property of atmospheric aerosols, but its effects on the ROS formation from SOA have been poorly characterized. By applying the electron paramagnetic resonance spin-trapping technique and the Diogenes chemiluminescence assay, we find highly distinct radical yields and composition at different pH values in the range of 1-7.4 from SOA generated by oxidation of isoprene, α-terpineol, α-pinene, β-pinene, toluene, and naphthalene. We observe that isoprene SOA has substantial hydroxyl radical (^•OH) and organic radical yields at neutral pH, which are 1.5-2 times higher compared to acidic conditions in total radical yields. Superoxide (O₂ ^•-) is found to be the dominant species generated by all types of SOAs at lower pH. At neutral pH, α-terpineol SOA exhibits a substantial yield of carbon-centered organic radicals, while no radical formation is observed by aromatic SOA. Further experiments with model compounds show that the decomposition of organic peroxide leading to radical formation may be suppressed at lower pH due to acid-catalyzed rearrangement of peroxides. We also observe 1.5-3 times higher molar yields of hydrogen peroxide (H₂O₂) in acidic conditions compared to neutral pH by biogenic and aromatic SOA, likely due to enhanced decomposition of α-hydroxyhydroperoxides and quinone redox cycling, respectively. These findings are critical to bridge the gap in understanding ROS formation mechanisms and kinetics in atmospheric and physiological environments.

Aqueous ·OH Oxidation of Highly Substituted Phenols as a Source of Secondary Organic Aerosol

Biomass burning (BB) releases large quantities of phenols (ArOH), which can partition into cloud/fog drops and aerosol liquid water (ALW), react, and form aqueous secondary organic aerosol (aqSOA). While simple phenols are too volatile to significantly partition into particle water, highly substituted ArOH partition more strongly and might be important sources of aqSOA in ALW. To investigate this, we measured the ^·OH oxidation kinetics and aqSOA yields for six highly substituted ArOH from BB. Second-order rate constants are high, in the range (1.9-14) × 10⁹ M^-1 s^-1 at pH 2 and (14-25) × 10⁹ M^-1 s^-1 at pH 5 and 6. Mass yields of aqSOA are also high, with an average (±1σ) value of 82 (±12)%. ALW solutes have a range of impacts on phenol oxidation by ^·OH: a BB sugar and some inorganic salts suppress oxidation, while a nitrate salt and transition metals enhance oxidation. Finally, we estimated rates of aqueous- and gas-phase formation of SOA from a single highly substituted phenol as a function of liquid water content (LWC), from conditions of cloud/fog (0.1 g-H₂O m^-3) to ALW (10 μg-H₂O m^-3). Formation of aqSOA is significant across the LWC range, although gas-phase ^·OH becomes dominant under ALW conditions. We also see a generally large discrepancy between measured and modeled aqueous ^·OH concentrations across the LWC range.

Exposure models for particulate matter elemental concentrations in Southern California

Due to a scarcity of routine monitoring of speciated particulate matter (PM), there has been limited capability to develop exposure models that robustly estimate component-specific concentrations. This paper presents the largest such study conducted in a single urban area. Using samples that were collected at 220 locations over two seasons, quasi-ultrafine (PM_0.2), accumulation mode fine (PM_0.2-2.5), and coarse (PM_2.5-10) particulate matter concentrations were used to develop spatiotemporal regression, machine learning models that enabled predictions of 24 elemental components in eight Southern California communities. We used supervised variable selection of over 150 variables, largely from publicly available sources, including meteorological, roadway and traffic characteristics, land use, and dispersion model estimates of traffic emissions. PM components that have high oxidative potential (and potentially large health effects) or are otherwise important markers for major PM sources were the primary focus. We present results for copper, iron, and zinc (as non-tailpipe vehicle emissions); elemental carbon (diesel emissions); vanadium (ship emissions); calcium (soil dust); and sodium (sea salt). Spatiotemporal linear regression models with 17 to 36 predictor variables including meteorology; distance to different classifications of roads; intersections and off ramps within a given buffer distance; truck and vehicle traffic volumes; and near-roadway dispersion model estimates produced superior predictions over the machine learning approaches (cross validation R-squares ranged from 0.76 to 0.92). Our models are easily interpretable and appear to have more effectively captured spatial gradients in the metallic portion of PM than other comparably large studies, particularly near roadways for the non-tailpipe emissions. Furthermore, we demonstrated the importance of including spatiotemporally resolved meteorology in our models as it helped to provide key insights into spatial patterns and allowed us to make temporal predictions.

A new method for measuring airborne elemental carbon using PUF disk passive samplers

Carbonaceous aerosol species, such as elemental carbon (EC), are important Short-Lived Climate Forcers (SLCFs), contributing to climate and health effects of air pollution. The quantification of carbonaceous aerosols has been conventionally carried out using active air sampling followed by various analytical techniques, such as thermal/thermal-optical analysis. Active sampling requires specific equipment and infrastructure with electricity and therefore may not be the best choice for studying carbonaceous aerosols at remote locations. Passive sampling on the other hand provides a simple and cost-effective alternative to study time-weighted temporal and spatial trends. For the first time in this study, we have developed a method to examine the viability of measuring EC using polyurethane foam passive air samplers (PUF-PAS) coupled with a thermal analysis, i.e., EnCan-Total-900 (ECT9). The method was found reproducible with coefficients of variation as low as 3% for EC measured in ambient passive samples. The method had relatively low background with EC levels in blanks being as low as 0.1% of those in deployed samples, allowing quantification within a wide range of concentrations. The results indicate a homogenous distribution of particles within the PUF-PAS substrate. EC concentrations measured with the passive method were not significantly different from those obtained from active samples at the study sites (p > 0.01). This proof of concept of the PUF-PAS method provides an opportunity to cost-effectively expand measurements of elemental carbon at the global scale, and could be further extended to include other carbonaceous aerosol species in the future. This helps address regional data gaps for improving uncertainties of SLCF impacts on global climate forcing and to inform policy decisions.

Emerging investigator series: aqueous-phase processing of atmospheric aerosol influences dissolution kinetics of metal ions in an urban background site in the Po Valley

Metals are an important atmospheric aerosol component; their impacts on health and the environment depend also on their solubility, dissolution kinetics and chemical form in which they are present in the aerosol (e.g., oxidation state, inorganic salt or oxide/hydroxide, organic complex). In this study, we investigated the impact of fog processing on the solubility and dissolution of metals in PM_2.5 samples collected in an urban background site in Padova (Italy). For each sample, we determined the solubility and dissolution kinetics of 17 elements in a solution simulating fog water in the winter season in the Po Valley (pH 4.7, T 5 °C, and water content ∼0.5 g m^-3). We also determined water-soluble inorganic and organic compounds having ligand properties. We used the model E-AIM IV to calculate the aerosol liquid water (ALW) content and pH, and we used the model Visual MinteQ to determine the speciation picture of the most important elements under conditions of both deliquescent aerosol (ALW and pH calculated using E-AIM IV, ambient temperature) and simulated fog. We found that the dissolution of Al, Cu, and Fe metal ions, predicted to be largely coordinated with organic compounds under fog conditions, was either immediate or considerably faster in samples collected on days with observed fog events compared with those collected on days having drier conditions. For readily soluble elements, such as As, Cd, Cr, Sr, and Zn, such an effect was not observed. Our study highlights the importance of coordination chemistry in atmospheric aerosol and fog in determining the bioavailability of particle-bound metals.

Haze Air Pollution Health Impacts of Breath-Borne VOCs

Here, we investigated the use of breath-borne volatile organic compounds (VOCs) for rapid monitoring of air pollution health effects on humans. Forty-seven healthy college students were recruited, and their exhaled breath samples (n = 235) were collected and analyzed for VOCs before, on, and after two separate haze pollution episodes using gas chromatography-ion mobility spectrometry (GC-IMS). Using a paired t-test and machine learning model (Gradient Boosting Machine, GBM), six exhaled VOC species including propanol and isoprene were revealed to differ significantly among pre-, on-, and post-exposure in both haze episodes, while none was found between clean control days. The GBM model was shown capable of differentiating between pre- and on-exposure to haze pollution with a precision of 90-100% for both haze episodes. However, poor performance was detected for the same model between two different clean days. In addition to gender and particular haze occurrence influences, correlation analysis revealed that NH₄⁺, NO₃^-, acetic acid, mesylate, CO, NO₂, PM_2.5, and O₃ played important roles in the changes in breath-borne VOC fingerprints following haze air pollution exposure. This work has demonstrated direct evidence of human health impacts of haze pollution while identifying potential breath-borne VOC biomarkers such as propanol and isoprene for haze air pollution exposure.

Recent Insights into Particulate Matter (PM2.5)-Mediated Toxicity in Humans: An Overview

Several epidemiologic and toxicological studies have commonly viewed ambient fine particulate matter (PM_2.5), defined as particles having an aerodynamic diameter of less than 2.5 µm, as a significant potential danger to human health. PM_2.5 is mostly absorbed through the respiratory system, where it can infiltrate the lung alveoli and reach the bloodstream. In the respiratory system, reactive oxygen or nitrogen species (ROS, RNS) and oxidative stress stimulate the generation of mediators of pulmonary inflammation and begin or promote numerous illnesses. According to the most recent data, fine particulate matter, or PM_2.5, is responsible for nearly 4 million deaths globally from cardiopulmonary illnesses such as heart disease, respiratory infections, chronic lung disease, cancers, preterm births, and other illnesses. There has been increased worry in recent years about the negative impacts of this worldwide danger. The causal associations between PM_2.5 and human health, the toxic effects and potential mechanisms of PM_2.5, and molecular pathways have been described in this review.

Atmospheric Autoxidation of Organophosphate Esters

Organophosphate esters (OPEs), widely used as flame retardants and plasticizers, have frequently been identified in the atmosphere. However, their atmospheric fate and toxicity associated with atmospheric transformations are unclear. Here, we performed quantum chemical calculations and computational toxicology to investigate the reaction mechanism of peroxy radicals of OPEs (OPEs-RO₂^•), key intermediates in determining the atmospheric chemistry of OPEs, and the toxicity of the reaction products. TMP-RO₂^• (R₁) and TCPP-RO₂^• (R₂) derived from trimethyl phosphate and tris(2-chloroisopropyl) phosphate, respectively, are selected as model systems. The results indicate that R₁ and R₂ can follow an H-shift-driven autoxidation mechanism under low NO concentration ([NO]) conditions, clarifying that RO₂^• from esters can follow an autoxidation mechanism. The unexpected autoxidation mechanism can be attributed to the distinct role of the ─(O)₃P(═O) phosphate-ester group in facilitating the H-shift of OPEs-RO₂^• from commonly encountered ─OC(═O)─ and ─ONO₂ ester groups in the atmosphere. Under high [NO] conditions, NO can mediate the autoxidation mechanism to form organonitrates and alkoxy radical-related products. The products from the autoxidation mechanism have low volatility and aquatic toxicity compared to their corresponding parent compounds. The proposed autoxidation mechanism advances our current understanding of the atmospheric RO₂^• chemistry and the environmental risk of OPEs.

Oxidation Flow Reactor Results in a Chinese Megacity Emphasize the Important Contribution of S/IVOCs to Ambient SOA Formation

Oxygenated volatile organic compounds (OVOCs) and secondary organic aerosol (SOA) formation potential of ambient air in Guangzhou, China was investigated using a field-deployed oxidation flow reactor (OFR). The OFR was used to mimic hours to weeks of atmospheric exposure to hydroxyl (OH) radicals within the 2-3 min residence time. A comprehensive investigation on the variation of VOCs and OVOCs as a function of OH exposure is shown. Substantial formation of organic acids and nitrogen-containing OVOC species were observed. Maximum SOA formation in the OFR was observed following 1-4 equiv days' OH exposure. SOA produced from known/measured VOC/IVOC precursors such as single-ring aromatics and long-chain alkanes can account for 52-75% of measured SOA under low NO_x and 26-60% under high NO_x conditions based on laboratory SOA yield parametrizations. To our knowledge, this is the first time that the contribution (8-20%) of long-chain (C₈-C₂₀) alkane oxidation to OFR SOA formation was quantified from direct measurement. By additionally estimating contribution from unmeasured semivolatile and intermediate volatility compounds (S/IVOCs) that are committed with C₈-C₂₀ alkanes, 64-100% of the SOA formation observed in the OFR can be explained, signifying the important contribution of S/IVOCs such as large cyclic alkanes to ambient SOA.

Secondary organic aerosol formation and aging from ambient air in an oxidation flow reactor during wintertime in Beijing, China

Secondary organic aerosols (SOA) constitute a large fraction of atmospheric aerosols, yet our knowledge of the formation and aging processes of SOA in megacities of China is still limited. In this work, the formation and aging processes of SOA in winter in Beijing was investigated using a high-resolution aerosol mass spectrometer (AMS) and an oxidation flow reactor (OFR). Our results showed that the OA enhancement from OH aging peaked at ∼3.9 equivalent days with an average enhancement of 0.9 (±0.3) μg m^-3. Positive matrix factorization analysis of AMS-OFR data identified three primary OA (POA) and two SOA factors. While the concentrations of POA factors decreased as a function of photochemical age, the two SOA factors showed clear enhancements by 2.5 and 4.3 μg m^-3 at ∼3.9 and ∼2.6 days of equivalent photochemical age, respectively. The average contribution of SOA to the total OA was 47% in ambient air and 87% in OFR-oxidized ambient air. The elevated oxygen-to-carbon (O/C) ratio from 0.49 to 0.77-0.82 and the decreased hydrogen-to-carbon (H/C) from 1.37 to ∼1.1 highlighted the formation of more oxidized SOA during photochemical aging in winter in Beijing. The ubiquitous SOA enhancement as a function of OA levels indicated the significant formation potential of SOA in winter, and it varied differently among different episodes. In particular, we observed a maximum SOA enhancement of 38.6 μg m^-3 during a biomass burning event. This result demonstrates that photochemical oxidation of ubiquitous biomass burning emissions can be a large source of SOA in winter in North China Plain.