Effects-directed analysis (EDA) and toxicity identification evaluation (TIE): Complementary but different approaches for diagnosing causes of environmental toxicity

High-Efficiency Effect-Directed Analysis Leveraging Five High Level Advancements: A Critical Review

Organic contaminants are ubiquitous in the environment, with mounting evidence unequivocally connecting them to aquatic toxicity, illness, and increased mortality, underscoring their substantial impacts on ecological security and environmental health. The intricate composition of sample mixtures and uncertain physicochemical features of potential toxic substances pose challenges to identify key toxicants in environmental samples. Effect-directed analysis (EDA), establishing a connection between key toxicants found in environmental samples and associated hazards, enables the identification of toxicants that can streamline research efforts and inform management action. Nevertheless, the advancement of EDA is constrained by the following factors: inadequate extraction and fractionation of environmental samples, limited bioassay endpoints and unknown linkage to higher order impacts, limited coverage of chemical analysis (i.e., high-resolution mass spectrometry, HRMS), and lacking effective linkage between bioassays and chemical analysis. This review proposes five key advancements to enhance the efficiency of EDA in addressing these challenges: (1) multiple adsorbents for comprehensive coverage of chemical extraction, (2) high-resolution microfractionation and multidimensional fractionation for refined fractionation, (3) robust in vivo/vitro bioassays and omics, (4) high-performance configurations for HRMS analysis, and (5) chemical-, data-, and knowledge-driven approaches for streamlined toxicant identification and validation. We envision that future EDA will integrate big data and artificial intelligence based on the development of quantitative omics, cutting-edge multidimensional microfractionation, and ultraperformance MS to identify environmental hazard factors, serving for broader environmental governance.

Innovative analytical methodologies for characterizing chemical exposure with a view to next-generation risk assessment

The chemical burden on the environment and human population is increasing. Consequently, regulatory risk assessment must keep pace to manage, reduce, and prevent adverse impacts on human and environmental health associated with hazardous chemicals. Surveillance of chemicals of known, emerging, or potential future concern, entering the environment-food-human continuum is needed to document the reality of risks posed by chemicals on ecosystem and human health from a one health perspective, feed into early warning systems and support public policies for exposure mitigation provisions and safe and sustainable by design strategies. The use of less-conventional sampling strategies and integration of full-scan, high-resolution mass spectrometry and effect-directed analysis in environmental and human monitoring programmes have the potential to enhance the screening and identification of a wider range of chemicals of known, emerging or potential future concern. Here, we outline the key needs and recommendations identified within the European Partnership for Assessment of Risks from Chemicals (PARC) project for leveraging these innovative methodologies to support the development of next-generation chemical risk assessment.

Environmental Risks of Pharmaceutical Mixtures in Aquatic Ecosystems: Reflections on a Decade of Research

Pharmaceuticals and personal care products (PPCPs) occur as variable mixtures in surface waters receiving discharges of human and animal wastes. A key question identified a decade ago is how to assess the effects of long-term exposures of these PPCP mixtures on nontarget organisms. We review the recent progress made on assessing the aquatic ecotoxicity of PPCP mixtures-with a focus on active pharmaceutical ingredients-and the challenges and research needs that remain. New knowledge has arisen from the use of whole-mixture testing combined with component-based approaches, and these studies show that mixtures often result in responses that meet the concentration addition model. However, such studies have mainly been done on individual species over shorter time periods, and longer-term, multispecies assessments remain limited. The recent use of targeted and nontargeted gene analyses has improved our understanding of the diverse pathways that are impacted, and there are promising new "read-across" methods that use mammalian data to predict toxicity in wildlife. Risk assessments remain challenging given the paucity of ecotoxicological and exposure data on PPCP mixtures. As such, the assessment of PPCP mixtures in aquatic environments should remain a priority given the potential for additive-as well as nontarget-effects in nontarget organisms. In addition, we need to improve our understanding of which species, life stages, and relevant endpoints are most sensitive to which types of PPCP mixtures and to expand our knowledge of environmental PPCP levels in regions of the globe that have been poorly studied to date. We recommend an increased use of new approach methodologies, in particular "omics," to advance our understanding of the molecular mechanics of mixture effects. Finally, we call for systematic research on the role of PPCP mixtures in the development of antimicrobial resistance. Environ Toxicol Chem 2024;43:549-558. © 2023 SETAC.

Combining Passive Sampling and Dosing to Unravel the Contribution of Hydrophobic Organic Contaminants to Sediment Ecotoxicity

Contaminated sediments are ubiquitous repositories of pollutants and cause substantial environmental risks. Results of sediment bioassays remain difficult to interpret, however, as observed effects may be caused by a variety of (un)known stressors. This study aimed therefore to isolate the effects of hydrophobic organic contaminants from other (non)chemical stressors present in contaminated sediments, by employing a newly developed passive sampling-passive dosing (PSPD) test. The results showed that equilibrium partitioning between pesticides or polyaromatic hydrocarbons (PAHs) in contaminated sediments and a silicone rubber (SR) passive sampler was achieved after 1-3 days. Chlorpyrifos concentrations in pore water of spiked sediment matched very well with concentrations released from the SR into an aqueous test medium, showing that SR can serve as a passive dosing device. Subjecting the 96 h PSPD laboratory bioassay with nonbiting midge (Chironomus riparius) larvae to field-collected sediments showed that at two locations, concentrations of the hydrophobic organic contaminant mixtures were high enough to affect the test organisms. In conclusion, the developed PSPD test was able to isolate the effects of hydrophobic organic contaminants and provides a promising simplified building block for a suite of PSPD tests that after further validation could be used to unravel the contribution of hydrophobic organic chemicals to sediment ecotoxicity.

Ecotoxicological mixture risk assessment of 35 pharmaceuticals in wastewater effluents following post-treatment with ozone and/or granulated activated carbon

Reducing the risk posed by mixtures of pharmaceuticals is a goal of current initiatives such as the European Green Deal to reduce anthropological environmental impacts. Wastewater effluent typically contains large numbers of active pharmaceutical ingredients (APIs). For some APIs, existing technology such as conventional activated sludge (CAS) wastewater treatment plants (WWTPs) have removal rates below 20 %, thus the WWTP discharges are adding to the toxic burden of receiving waters. We present an environmental risk assessment of mixtures of 35 APIs in effluent samples from 82 Northern European WWTPs using the concentration addition model, and identify the respective risk-driving APIs. This is then compared to a corresponding mixture risk assessment of effluent samples from the Danish Hillerød WWTP subjected to post-treatment with varying specific ozone doses (0.15-1.05 mgO3/mgDOC) and/or granulated activated carbon (GAC). All 82 WWTP effluent samples exceeded risk thresholds by at least a factor of 30, with a median RQSUM of 92.9, highlighting the need for effluent post-treatment and/or a substantial dilution in the recipient waters. Antibiotics, analgesics and anti-depressants were among the top risk drivers with 99 % of the average mixture risk attributable to azithromycin, diclofenac, venlafaxine, clarithromycin and mycophenolic acid. Effluent mixture risk was reduced by ozonation in a concentration-dependent manner, decreasing below threshold levels to a median RQSUM of 0.83 following treatment with 0.65 mgO3/mg DOC. Fresh GAC was also effective at reducing the mixture risk both alone and with ozone treatment, with median RQSUM of 0.04 and 0.07 respectively. To our knowledge, this is the first study to present a risk assessment of pharmaceutical mixtures in effluent comparing "conventional" WWTP processes with additional post-treatment with ozone and/or GAC for reducing the joint risks of pharmaceutical mixtures for recipient waters. We demonstrate the need for additional WWTP treatment technologies, and the efficacy of GAC and ozonation in decreasing the risk to the aquatic environment from pharmaceutical mixtures to below acceptable threshold limits.

Effect-Directed Analysis Combined with Nontarget Screening to Identify Unmonitored Toxic Substances in the Environment

Effect-directed analysis (EDA) combined with nontarget screening (NTS) has established a valuable tool for the identification of unmonitored toxic substances in environmental samples. It consists of three main steps: (1) highly potent fraction identification, (2) toxicant candidate selection, and (3) major toxicant identification. Here, we discuss the methodology, current status, limitations, and future challenges of EDA combined with NTS. This method has been applied successfully to various environmental samples, such as sediments, wastewater treatment plant effluents, and biota. We present several case studies and highlight key results. EDA has undergone significant technological advancements in the past 20 years, with the establishment of its key components: target chemical analysis, bioassays, fractionation, NTS, and data processing. However, it has not been incorporated widely into environmental monitoring programs. We provide suggestions for the application of EDA combined with NTS in environmental monitoring programs and management, with the identification of further research needs.

Toxicological effects of aqueous extract of Genipa americana L. leaves on adult zebrafish (Danio rerio): Chemical profile, histopathological effects and lack of genotoxicity

Genipa americana is a native plant of Brazil with potential applications in folk medicine. Whereas most of the phytochemical and pharmacological studies on this plant have focused on its fruits, the crude extracts of its leaves contain chemical metabolites that may have toxicity to organisms, which have yet to be investigated. This study aimed to determine the main groups of secondary metabolites in the aqueous extract of the leaves of G. americana by phytochemistry and qualitative HPLC, and to evaluate the possible toxicological effects and histopathological changes caused by this extract in zebrafish (Danio rerio) adults, through micronucleus test, nuclear abnormalities and histopathological analyses of gills and liver. While three metabolites of high intensity (phenolic compounds, flavonoids and triterpenes) were found in the phytochemical evaluation, the HPLC showed results compatible with flavonoids and iridoids, all belonging to common classes for this species and the Rubiaceae family. The acute toxicity test did not induce mortality or genotoxicity in zebrafish, but after exposure for 96 h, it was possible to observe injuries to the fish gill tissue, such as lamellar fusion, vasodilation and telangiectasia; in the liver, necrosis was visualized at 40 mg/L, and at higher concentrations (80 and 100 mg/L) induced sinusoidal widening was identified. In conclusion, the results demonstrated the toxic potential of this plant for aquatic species.

Toxicity of tire particle leachates on early life stages of keystone sea urchin species

Particles from tires are a major fraction of microplastic pollution. They contain a wide range of chemical additives that can leach into the water and be harmful to aquatic organisms. In this study, we investigated the acute toxicity of tire particle leachates in early life stages of three keystone echinoderm species (Paracentrotus lividus, Arbacia lixula, Diadema africanum). Embryos were exposed for 72 h to a range of leachate dilutions, prepared using a concentration of 1 g L-1. Larval growth, abnormal development, and mortality were the measured endpoints. Furthermore, we estimated the activity of glutathione S transferase (GST) and the electron transport system (ETS) in P. lividus. Strong concentration-dependent responses were observed in all species, though with differing sensitivity. The median effect concentrations for abnormal development in P. lividus and A. lixula were 0.16 and 0.35 g L-1, respectively. In D. africanum, mortality overshadowed abnormal development and the median lethal concentration was 0.46 g L-1. Larvae of P. lividus were significantly smaller than the control from 0.125 g L-1, while the other two species were affected from 0.5 g L-1. ETS activity did not change but there was a non-significant trend of increasing GST activity with leachate concentration in P. lividus. Seven organic chemicals and eight metals were detected at elevated concentrations in the leachates. While we regard zinc as a strong candidate to explain some of the observed toxicity, it can be expected that tire particle leachates exhibit a cocktail effect and other leached additives may also contribute to their toxicity. Our results emphasize the importance of multi-species studies as they differ in their susceptibility to tire particle pollution. We found negative effects at concentrations close to projections in the environment, which calls for more research and mitigation actions on these pollutants.

Identification and Prioritization of Environmental Organic Pollutants: From an Analytical and Toxicological Perspective

Exposure to environmental organic pollutants has triggered significant ecological impacts and adverse health outcomes, which have been received substantial and increasing attention. The contribution of unidentified chemical components is considered as the most significant knowledge gap in understanding the combined effects of pollutant mixtures. To address this issue, remarkable analytical breakthroughs have recently been made. In this review, the basic principles on recognition of environmental organic pollutants are overviewed. Complementary analytical methodologies (i.e., quantitative structure-activity relationship prediction, mass spectrometric nontarget screening, and effect-directed analysis) and experimental platforms are briefly described. The stages of technique development and/or essential parts of the analytical workflow for each of the methodologies are then reviewed. Finally, plausible technique paths and applications of the future nontarget screening methods, interdisciplinary techniques for achieving toxicant identification, and burgeoning strategies on risk assessment of chemical cocktails are discussed.

Bioanalytical and non-targeted mass spectrometric screening for contaminants of emerging concern in Southern California bight sediments

Assessing the impact of chemical contaminants on aquatic ecosystem health remains challenging due to complex exposure scenarios and the myriad of impact metrics to consider. To expand the breadth of compounds monitored and evaluate the potential hazard of environmental mixtures, cell-based bioassays (estrogen receptor alpha (ERα) and aryl hydrocarbon receptor (AhR)) and non-targeted chemical analyses with high resolution mass spectrometry (NTA-HRMS) were used to assess the quality of ∼70 marine sediment samples collected from 5 distinct coastal and offshore habitats of the Southern California Bight. AhR responses (<0.12-4.5 ng TCDD/g dry weight) were more frequently detectable and more variable than for ERα (<0.1-0.5 ng E2/g dry weight). The range of AhR and ERα responses increased by habitat as follows: Channel Islands < Mid-shelf < Marinas < Ports < Estuaries. The narrow range and magnitude of ERα screening response suggested limited potential for estrogenic impacts across sediments from all 5 habitats. The AhR response was positively correlated with total PAH and PCB concentrations and corresponded with a chemical score index representing the severity of metal and organic contamination. NTA-HRMS fingerprints generated in positive electrospray ionization mode were clearly distinguishable among coastal vs. offshore samples, with the greatest chemical complexity (n = 982 features detected) observed in estuarine sediment from a highly urbanized watershed (Los Angeles River). The concordance and complementary nature of bioscreening and NTA-HRMS results indicates their utility as holistic proxies for sediment quality, and when analyzed in conjunction with routine targeted chemical monitoring, show promise in identifying unexpected contaminants and novel toxicants.

Integrated Exposure and Algal Ecotoxicological Assessments of Effluents from Secondary and Advanced-Tertiary Wastewater-Treatment Plants

The great concern over the environmental impact of wastewaters has led to the designing of advanced treatment processes to upgrade conventional treatment plants and achieve a significant reduction of contaminants in receiving waters. In the present study we combined chemical and ecotoxicological analyses, aiming to evaluate the reduction of toxicity effects associated with the removal of micropollutants and to define the contribution of the detected compounds to the overall toxicity of the mixtures in a series of wastewater effluents collected from a secondary treatment (OUT 2) and from a tertiary activated carbon treatment (OUT 3) plant. The target compounds were selected after a screening procedure among pharmaceuticals, musk fragrances, and trace metals. The classical algal growth inhibition test was conducted on the original effluent samples and on different fractions obtained by solid-phase extraction (SPE) treatment. A good accordance was found between the removal of toxicity (30%-80%) and organic compounds (70%-80%) after the tertiary treatment, suggesting its high efficiency to improve the wastewater quality. The discrepancy between the contribution to the overall toxicity of the nonadsorbable compounds (i.e., inorganic or very polar organic compounds) as experimentally measured by the SPE bioassays (18%-76%) and calculated by the concentration addition approach (>97%) could be mitigated by including the bioavailability correction in metal-toxicity modeling of wastewater mixtures. For the organic compounds, the toxic equivalency method enabled us to quantify the portion of toxicity explained by the detected chemicals in both OUT 2 (82%-104%) and OUT 3 (5%-57%), validating the selection of the target molecules. The applied integrating approach could be implemented by the inclusion of both additional target chemicals and toxicity endpoints. Environ Toxicol Chem 2022;41:2404-2419. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

SETApp: A machine learning and image analysis based application to automate the sea urchin embryo test

Since countless xenobiotic compounds are being found in the environment, ecotoxicology faces an astounding challenge in identifying toxicants. The combination of high-throughput in vivo/in vitro bioassays with high-resolution chemical analysis is an effective way to elucidate the cause-effect relationship. However, these combined strategies imply an enormous workload that can hinder their implementation in routine analysis. The purpose of this study was to develop a new high throughput screening method that could be used as a predictive expert system that automatically quantifies the size increase and malformation of the larvae and, thus, eases the application of the sea urchin embryo test in complex toxicant identification pipelines such as effect-directed analysis. For this task, a training set of 242 images was used to calibrate the size-increase and malformation level of the larvae. Two classification models based on partial least squares discriminant analysis (PLS-DA) were built and compared. Moreover, Hierarchical PLS-DA shows a high proficiency in classifying the larvae, achieving a prediction accuracy of 84 % in validation. The scripts built along the work were compiled in a user-friendly standalone app (SETApp) freely accessible at https://github.com/UPV-EHU-IBeA/SETApp. The SETApp was tested in a real case scenario to fulfill the tedious requirements of a WWTP effect-directed analysis.

Aquatic Contamination in Lugano Lake (Lugano Lake Ecological Reserve, Buenos Aires, Argentina) Cause Negative Effects on the Reproduction and Juvenile Survival of the Native Gastropod Biomphalaria straminea

Lugano Lake is located in an Ecological Reserve of Buenos Aires City. Biomonitoring of its water quality is essential due to its importance as a place for recreation and protection of native species. Biomphalaria straminea is a native hermaphrodite aquatic gastropod that inhabits different freshwater bodies of Argentina and was recently selected as a potential bioindicator. We propose this study as a first approach to assessing specific organisms’ use in biomonitoring of urban wild reserves, and the usefulness of reproduction assays. B. straminea survival, behavior, reproduction success and offspring survival after the exposure to water samples from Lugano Lake (L1, L2, and L3) were evaluated. Temperature, pH, conductivity and dissolved oxygen were registered in situ. Samples were transported to the laboratory and chemical analysis and bioassays were performed using 20 snails per site. A control group with tap water was added. Egg masses were separated, exposed individually and observed daily using a stereoscopic microscope. After hatching, juveniles were placed in tap water and offspring survival was registered at the first, second, third and fourth months after the beginning of the assay. High levels of conductivity, turbidity and nutrients were obtained. Ammonium and nitrite were higher than the guideline level for the protection of aquatic life. During the bioassay 20% of the snails (L2 and L3) showed abnormally protruding of the head-food region. The number of eggs and embryonated eggs per mass did not differ between treatments. Egg masses exposed to water samples from the lake presented overlapping and abnormal eggs and arrested embryos. Besides, low % of hatching (L1: 33%, L2: 42%, and L3: 16%) and juvenile survival after the first (L1:14%; L2:78%) and second month (L1: 60%) were noted. In the control group, 85% of hatching and 100%–90% of survival were observed. Our results suggests the presence of pollutant in the lake. B. straminea seems to be a sensitive local species. Biomphalaria spp. reproduction assays can provide a valuable endpoint for toxicity and risk assessments and a usefulness tool for biomonitoring water quality.

Identification of toxicity factors and causal analysis of toxicity in surface sediments from Liaohe river basin, Northeast China using an effect guidance strategy

Sediments play a pivotal role in maintaining the aquatic ecological status of rivers. However, the determination of the key toxicants that consider the combined effects of all sediment-related contaminants are still challenging and necessary for an appropriate sediment risk assessment. The effects of sediments on aquatic organisms have been reported in Liaohe River, but their key toxicity factors are not well known. To determine the key toxicity factors, twenty-six surface sediment samples from Liaohe River tributaries in Northeast China were collected. Acute toxicity test of midge larvae results showed that 6 of 26 tributaries had obvious toxic effects, with survival rates of 37%-57% (p < 0.05). The masking test showed that the main pollutants in the surface sediments of T7 and T16 were metals, that of T8 was an organic pollutant, those of T19 and T26 were organic pollutants and ammonia, and those of T17 were heavy metal and ammonia. Chemical analysis showed that the relatively high concentrations of ammonia were only presented in surface sediments of T17, T19, and T26, with PTU of 1.5, 1.2 and 1.1, respectively, whereas heavy metals were markedly high in surface sediments from T7 and T16, with PTU of 0.92 and 0.61, respectively. Interestingly, the observed toxicity in surface sediments agreed with the toxicity predicted by chemical analysis Moreover, the significant correlation between the survival and volume ratio of the sediment and overlying water confirmed ammonia nitrogen was key toxicity factor in T17, T19, and T26, whereas Cu was the key toxicity factor in T7 that cause the biological toxicity. In conclusion, the major toxic factors of ammonia and copper in the sediments were identified. Moreover, our study suggested that effect guidance strategy was an effective method for sediment quality assessment.

Omics-based ecosurveillance for the assessment of ecosystem function, health, and resilience

Current environmental monitoring efforts often focus on known, regulated contaminants ignoring the potential effects of unmeasured compounds and/or environmental factors. These specific, targeted approaches lack broader environmental information and understanding, hindering effective environmental management and policy. Switching to comprehensive, untargeted monitoring of contaminants, organism health, and environmental factors, such as nutrients, temperature, and pH, would provide more effective monitoring with a likely concomitant increase in environmental health. However, even this method would not capture subtle biochemical changes in organisms induced by chronic toxicant exposure. Ecosurveillance is the systematic collection, analysis, and interpretation of ecosystem health-related data that can address this knowledge gap and provide much-needed additional lines of evidence to environmental monitoring programs. Its use would therefore be of great benefit to environmental management and assessment. Unfortunately, the science of 'ecosurveillance', especially omics-based ecosurveillance is not well known. Here, we give an overview of this emerging area and show how it has been beneficially applied in a range of systems. We anticipate this review to be a starting point for further efforts to improve environmental monitoring via the integration of comprehensive chemical assessments and molecular biology-based approaches. Bringing multiple levels of omics technology-based assessment together into a systems-wide ecosurveillance approach will bring a greater understanding of the environment, particularly the microbial communities upon which we ultimately rely to remediate perturbed ecosystems.

Quantitative non-targeted analysis: Bridging the gap between contaminant discovery and risk characterization

Chemical risk assessments follow a long-standing paradigm that integrates hazard, dose-response, and exposure information to facilitate quantitative risk characterization. Targeted analytical measurement data directly support risk assessment activities, as well as downstream risk management and compliance monitoring efforts. Yet, targeted methods have struggled to keep pace with the demands for data regarding the vast, and growing, number of known chemicals. Many contemporary monitoring studies therefore utilize non-targeted analysis (NTA) methods to screen for known chemicals with limited risk information. Qualitative NTA data has enabled identification of previously unknown compounds and characterization of data-poor compounds in support of hazard identification and exposure assessment efforts. In spite of this, NTA data have seen limited use in risk-based decision making due to uncertainties surrounding their quantitative interpretation. Significant efforts have been made in recent years to bridge this quantitative gap. Based on these advancements, quantitative NTA data, when coupled with other high-throughput data streams and predictive models, are poised to directly support 21st-century risk-based decisions. This article highlights components of the chemical risk assessment process that are influenced by NTA data, surveys the existing literature for approaches to derive quantitative estimates of chemicals from NTA measurements, and presents a conceptual framework for incorporating NTA data into contemporary risk assessment frameworks.

Multivariate Analysis of Sediment Toxicity in an Ocean Ecosystem: A Southern California Bight Case Study

Contaminated sediments can negatively affect aquatic organisms and beneficial uses of coastal regions. Monitoring programs typically collect many indicators of sediment toxicity, yet multivariate approaches that comprehensively evaluate data across heterogeneous spatial environments are frequently not performed. In this paper, we explore a multivariate approach to show that a list of suspected drivers of sediment toxicity to native Mytilus galloprovincialis (mussel) and Eohaustorius estuarius (a marine amphipod) population can be narrowed down without excluding samples, and that redundancies in sampling sites can be identified and isolated. Using a 153 × 28 data matrix assembled from a southern California-wide bight monitoring program, we demonstrate by this approach that Port of Los Angeles (PLA) and San Diego Bay (SDB) contained the most toxic sediments in the bight in 2008, the nature of which was unique to each locality. (Note: Little toxicity was observed here in 2013 and 2018.) In PLA sediments, mussels were more affected than amphipods, with higher survivability associated with low Hg and Sn levels. Conversely, amphipods had higher mortality than mussel embryos in SDB sediments, with higher survivability associated with low Be and Co levels. Nitrogen, organic content, and finer sediment particles were not related to the survivability of these organisms.

Using Estrogenic Activity and Nontargeted Chemical Analysis to Identify Contaminants in Sewage Sludge

Diverse organic compounds, many derived from consumer products, are found in sewage sludge worldwide. Understanding which of these poses the most significant environmental threat following land application can be investigated through a variety of predictive and cell-based toxicological techniques. Nontargeted analysis using high-resolution mass spectrometry with predictive estrogenic activity modeling was performed on sewage sludge samples from 12 wastewater treatment plants in California. Diisobutyl phthalate and dextrorphan were predicted to exhibit estrogenic activity and identified in >75% of sludge samples, signifying their universal presence and persistence. Additionally, the application of an estrogen-responsive cell bioassay revealed reductions in agonistic activity during mesophilic and thermophilic treatment but significant increases in antagonism during thermophilic treatment, which warrants further research. Ten nontarget features were identified (metoprolol, fenofibric acid, erythrohydrobupropion, oleic acid, mestranol, 4'-chlorobiphenyl-2,3-diol, medrysone, scillarenin, sudan I, and N,O-didesmethyltramadol) in treatment set samples and are considered to have influenced the in vitro estrogenic activity observed. The combination of predictive and in vitro estrogenicity with nontargeted analysis has led to confirmation of 12 estrogen-active contaminants in California sewage sludge and has highlighted the importance of evaluating both agonistic and antagonistic responses when evaluating the bioactivity of complex samples.

Emerging POPs-type cocktail signatures in Pusa caspica in quantitative structure-activity relationship of Caspian Sea

The Caspian seal Pusa caspica is the only endemic mammalian species throughout the Caspian Sea. This is the first report on risk assessment of persistent organic pollutants (POPs) in Caspian seals by age-sex and tissue-specific uptake, and their surrounding environment (seawater, surface sediments, and suspended particulate matters, SPMs) in the Gorgan Bay (Caspian Sea, Iran). Among the quantified 70 POPs (∑₃₅PCBs, ∑₃HCHs, ∑₆CHLs, ∑₆DDTs, ∑₁₇PCDD/Fs, HCB, dieldrin, and aldrin), ∑₃₅PCBs were dominant in abiotic matrices (48.80% of ∑₇₀POPs), followed by HCHs > CHLs > DDTs > PCDD/Fs > other POPs in surface sediments > SPMs > seawater, while the toxic equivalent quantity (TEQ_WHO) exceeded the safe value (possible risk in this area). In biota, the highest levels of ∑₇₀POPs were found in males (756.3 ng g^-1 dw, p < 0.05), followed by females (419.0 ng g^-1 dw) and pups (¹91.6 ng g^-1 dw) in liver > kidney > muscle > blubber > intestine > fur > heart > spleen > brain. The positive age-related POPs declining correlation between mother-pup pairs suggested the possible maternal transfer of POPs to offspring. The cocktail toxicity assessment revealed that Caspian seals can pose a low risk based on their mixed-TEQ values. Self-organizing map (SOM) indicated the non-coplanar PCB-93 as the most over-represented functional congener in tissue-specific POPs bioaccumulation. Quantitative toxicant tissue-profiling is valuable for predicting the state of mixture toxicity in pinniped species.

Evaluating environmental impact of STP effluents on receiving water in Beijing by the joint use of chemical analysis and biomonitoring

To evaluate the environmental impact of receiving water from the Qinghe River sewage treatment plant (STP) effluents in Beijing, we collected sediments and Bellamya aeruginosa (Up-site, Discharge-site, and Down-site) both in 2017 and 2018 and analyzed the samples via chemical analysis, biological responses and transcriptomics. In two years of data, our biological results showed that AChE activities presented different degrees of influence on B. aeruginosa captured at sampling points of the STP compared to control sites (P < 0.05). Additionally, indicators of the antioxidant system (e.g., SOD, CAT, GST, EROD activity) and MDA content were significantly increased in the whole tissue at the Up-site of the STP. Integration of the assessed biomarkers using the integrated biomarker response (IBR) index ranked the environmental impact at sites as Up-site > Discharge-site > Down-site. In terms of the transcriptome data, B. aeruginosa collected from the Discharge-site of the STP showed greater transcriptomic response than it did from all other sites. KEGG pathway analysis revealed that sewage significantly altered the expression of genes involved in xenobiotics by cytochrome P450, drug metabolism-cytochrome P450, glutathione metabolism, oxidative phosphorylation, citrate (TCA) cycle, glycolysis/gluconeogenesis, apoptotic and Parkinson's disease. The concentrations of 34 organic pollutants (17 PAHs, 10 PAEs, 7 EDCs) were measured. The chemical concentrations of pollutants decreased from Up-site to Down-site and were well correlated with enzyme activity, IBR, and transcriptomic results. Our results demonstrated that the combined use of chemical analysis, biological responses and transcriptome data is necessary to validate the efficacy of a battery of biomarkers chosen to detect environmental stress due to pollution.

A ubiquitous tire rubber-derived chemical induces acute mortality in coho salmon

In U.S. Pacific Northwest coho salmon (Oncorhynchus kisutch), stormwater exposure annually causes unexplained acute mortality when adult salmon migrate to urban creeks to reproduce. By investigating this phenomenon, we identified a highly toxic quinone transformation product of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD), a globally ubiquitous tire rubber antioxidant. Retrospective analysis of representative roadway runoff and stormwater-affected creeks of the U.S. West Coast indicated widespread occurrence of 6PPD-quinone (<0.3 to 19 micrograms per liter) at toxic concentrations (median lethal concentration of 0.8 ± 0.16 micrograms per liter). These results reveal unanticipated risks of 6PPD antioxidants to an aquatic species and imply toxicological relevance for dissipated tire rubber residues.

Protein-affinity guided identification of chlorinated paraffin components as ubiquitous chemicals

Chlorinated paraffins (CPs) have been extensively examined to identify their components. Short-chain CPs with a carbon number of 10-13 have been strictly restricted or banned due to their addition to the list of Persistent Organic Pollutants in the world. However, more constituents with potential toxicities in these complicated mixtures are still unclear. In the present study, a purification method based on the protein affinity of thyroid hormone-related proteins (transthyretin and thyroid receptor) was established. The protein-based affinity extraction coupled with high-throughput scanning successfully discover a new group of chlorinated compounds (CP(O₂)) in commercial CP mixtures. The CP(O₂)s were purified from the commercial mixtures and identified to be chlorinated fatty acid methyl esters (CFAMEs) with a carbon chain length of 17-19 and 3-11 chlorines by a combination of liquid-liquid extraction, hydrolysis, Fourier transform infrared spectrometry and Orbitrap mass spectrometry. The newly identified CFAMEs were found to be ubiquitous in the environmental matrices, and concentration ratios of ∑CFAMEs/∑CPs ranged from 0.01 to 35 in air, soil and food samples. CFAMEs were also detected in blood samples of general populations, and accumulated in humans through dietary uptake. CFAMEs can compete with T4 for binding TTR with higher potencies than CPs, possibly leading to disruptions of thyroid hormone homeostasis.

Development of a Reduced-Volume Acute Lethality Toxicity Test for Hyalella azteca

Effects-directed analysis (EDA) is used to identify the principal toxic components within a complex mixture using iterative steps of chemical fractionation guided by bioassay results. Bioassay selection can be limited in EDA because of the volume requirements for many standardized test methods, and therefore, a reduced-volume acute toxicity test that also provides whole-organism responses is beneficial. To address this need, a static, 7-d, water-only, reduced-volume method (50 mL, 10 organisms) was developed for Hyalella azteca that substantially decreases the volume requirements of standard-volume acute test exposures (200-500 mL of test solution, 15-20 organisms) while maintaining water quality and meeting control survival criteria. Standard- and reduced-volume methods were compared by conducting concurrent toxicity tests with 2 inorganic toxicants (KCl and CdCl₂ ) and 2 organic mixtures of naphthenic acid fraction components (NAFCs) to evaluate test performance. There was no difference between methods when comparing the median lethal concentrations (LC50s) for KCl and both NAFC mixtures (p > 0.05). The LC50s for CdCl₂ were statistically different (p = 0.0002); however, this was not considered biologically meaningful because the difference between LC50s was <2-fold. In conclusion, the reduced-volume H. azteca test method generated results comparable to standard-volume test methods and is suitable for use in situations where limited testing material is available, such as when conducting EDA. Environ Toxicol Chem 2020;39:2221-2227. © Her Majesty the Queen in Right of Canada 2020. Reproduced with the permission of the Minister of Environment and Climate Change Canada.

Toward Sustainable Environmental Quality: Priority Research Questions for Asia

Environmental and human health challenges are pronounced in Asia, an exceptionally diverse and complex region where influences of global megatrends are extensive and numerous stresses to environmental quality exist. Identifying priorities necessary to engage grand challenges can be facilitated through horizon scanning exercises, and to this end we identified and examined 23 priority research questions needed to advance toward more sustainable environmental quality in Asia, as part of the Global Horizon Scanning Project. Advances in environmental toxicology, environmental chemistry, biological monitoring, and risk-assessment methodologies are necessary to address the adverse impacts of environmental stressors on ecosystem services and biodiversity, with Asia being home to numerous biodiversity hotspots. Intersections of the food-energy-water nexus are profound in Asia; innovative and aggressive technologies are necessary to provide clean water, ensure food safety, and stimulate energy efficiency, while improving ecological integrity and addressing legacy and emerging threats to public health and the environment, particularly with increased aquaculture production. Asia is the largest chemical-producing continent globally. Accordingly, sustainable and green chemistry and engineering present decided opportunities to stimulate innovation and realize a number of the United Nations Sustainable Development Goals. Engaging the priority research questions identified herein will require transdisciplinary coordination through existing and nontraditional partnerships within and among countries and sectors. Answering these questions will not be easy but is necessary to achieve more sustainable environmental quality in Asia. Environ Toxicol Chem 2020;39:1485-1505. © 2020 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Examining the correlation between quantifiable SVOCs and organic carbon content or particulate size in benthic sediments as a function of ocean stratum

The raw analytical concentration values of semi-volatile organic compounds (SVOCs) in ocean sediments do not necessarily reflect the bioavailable fractions of SVOCs in the sediments due to factors such as the total organic carbon content of sediments (TOC) and the percentage of fine particles in sediments (% fines) as they are believed to affect the extraction efficiency of SVOCs from sediments. Corrective actions are therefore taken to minimize their influence on measurements. In doing so, a broad and uniform correlation is assumed to exist between the 'native' levels of SVOCs and TOC or % fines across ocean strata. However, the validity of this blanket assumption is not yet verified. In this study, we examined the strength of the assumption using DDTs, PAHs and PCBs levels in sediments from Santa Monica Bay (SMB), California, USA. (The distribution patterns of these SVOCs in SMB are known and reproducible for quality assurance.) As our results show, a uniform correlation between SVOC levels and TOC or % fines across strata is mostly absent. For example, PAH and PCB levels show negative correlation with TOC or % fines, and only in canyon sediments, DDT levels correlate positively with both TOC and % fines across at least three strata. Furthermore, the distribution of PAH molecules appears to be controlled by molecular size with smaller PAHs being found almost exclusively in the canyons. Our finding here, being the first of its kind, suggests that more work is needed to clarify the reporting of SVOC levels in ocean sediments.

An integrative method for identification and prioritization of constituents of concern in produced water from onshore oil and gas extraction

In the United States, onshore oil and gas extraction operations generate an estimated 900 billion gallons of produced water annually, making it the largest waste stream associated with upstream development of petroleum hydrocarbons. Management and disposal practices of produced water vary from deep well injection to reuse of produced water in agricultural settings. However, there is relatively little information with regard to the chemical or toxicological characteristics of produced water. A comprehensive literature review was performed, screening nearly 16,000 published articles, and identifying 129 papers that included data on chemicals detected in produced water. Searches for information on the potential ecotoxicological or mammalian toxicity of these chemicals revealed that the majority (56%) of these compounds have not been a subject of safety evaluation or mechanistic toxicology studies and 86% lack data to be used to complete a risk assessment, which underscores the lack of toxicological information for the majority of chemical constituents in produced water. The objective of this study was to develop a framework to identify potential constituents of concern in produced water, based on available and predicted toxicological hazard data, to prioritize these chemicals for monitoring, treatment, and research. In order to integrate available evidence to address gaps in toxicological hazard on the chemicals in produced water, we have catalogued available information from ecological toxicity studies, toxicity screening databases, and predicted toxicity values. A Toxicological Priority Index (ToxPi) approach was applied to integrate these various data sources. This research will inform stakeholders and decision-makers on the potential hazards in produced water. In addition, this work presents a method to prioritize compounds that, based on hazard and potential exposure, may be considered during various produced water reuse strategies to reduce possible human health risks and environmental impacts.

Smarter Sediment Screening: Effect-Based Quality Assessment, Chemical Profiling, and Risk Identification

Sediments play an essential role in the functioning of aquatic ecosystems but simultaneously retain harmful compounds. However, sediment quality assessment methods that consider the risks caused by the combined action of all sediment-associated contaminants to benthic biota are still underrepresented in water quality assessment strategies. Significant advancements have been made in the application of effect-based methods, but methodological improvements can still advance sediment risk assessment. The present study aimed to explore such improvements by integrating effect-monitoring and chemical profiling of sediment contamination. To this end, 28 day life cycle bioassays with Chironomus riparius using intact whole sediment cores from contaminated sites were performed in tandem with explorative chemical profiling of bioavailable concentrations of groups of legacy and emerging sediment contaminants to investigate ecotoxicological risks to benthic biota. All contaminated sediments caused effects on the resilient midge C. riparius, stressing that sediment contamination is ubiquitous and potentially harmful to aquatic ecosystems. However, bioassay responses were not in line with any of the calculated toxicity indices, suggesting that toxicity was caused by unmeasured compounds. Hence, this study underlines the relevance of effect-based sediment quality assessment and provides smarter ways to do so.

Application of diffusive gradients in thin films (DGT) and simultaneously extracted metals (SEM) for evaluating bioavailability of metal contaminants in the sediments of Taihu Lake, China

The toxicities of heavy metals in sediments are related to their bioavailability, which is critical for deriving reliable sediment quality guidelines. To evaluate the bioavailability of the metals (Cd, Cu, Ni, Pb and Zn), sediments were collected from Taihu Lake, one of the largest and most important freshwater lakes in China. Concentrations of simultaneously extracted metals (1-M HCl extraction, C_SEM) in the sediments, metals released from sediment to pore waters and accumulated by diffusive gradients in thin films (DGT, C_DGT), and dissolved metals in the overlying water (C_OLW) were measured separately. Sediment toxicity was assessed with tubificids (Monopylephorus limosus) and chironomids (Chironomus kiiensis and Chironomus tentans). Significant relationships existed between the total metal concentrations and C_SEM, C_DGT, and C_OLW measurements (r² = 0.43-0.95, n = 27, p < 0.001), with stronger relationships with C_SEM (r² = 0.91-0.95) than C_DGT (r² = 0.56-0.85) and C_OLW (r² = 0.43-0.71). Risk quotients were derived by dividing C_SEM by sediment quality guideline values (SQGVs), and by dividing both C_DGT and C_OLW by water quality criteria (WQC). Toxicity of the sediments to the three species was better explained by the C_SEM-based risk quotient than those derived from C_DGT and C_OLW. The study indicated that DGT piston probes deployed face down in sediments did not accumulate metals in proportion to the bioavailable metal fraction that caused toxicity to these freshwater benthic organisms, and that single measurements of metals in overlying waters are not adequate for predicting risks of toxicity from sediments. The measurement of C_SEM was determined to be effective for assessing the risk posed by the metals in the Taihu Lake sediments, but offered limited improvement over measurement of total metal concentrations.

Determination of Endocrine Disruption Potential of Bisphenol A Alternatives in Food Contact Materials Using In Vitro Assays: State of the Art and Future Challenges

Alternatives to bisphenol A (BPA) are developed for food contact materials as a result of increasing evidence of exposure-correlated harmful effects of BPA. In vitro assays provide the fast, affordable, and mechanism insightful ways to screen endocrine disruption (ED), which is a major concern of new BPA alternatives. In this review, we summarize the safety and regulation information on the alternatives to BPA, review the state of the art of in vitro assays for ED evaluation, highlight their advantages and limitations, and discuss the challenges and future research needs. Our review shows that ligand binding, reporter gene, cell proliferation, and steroidogenesis are four commonly used in vitro assays to determine the ED at the response of receptor, gene transcription, and whole cell level. Major challenges are found from in vitro-in vivo translation and identification of ED chemicals in polymers. More studies on these areas are needed in the future.

Using the HPTLC-bioluminescence bacteria assay for the determination of acute toxicities in marine sediments and its eligibility as a monitoring assessment tool

For an integrated ecological risk assessment of marine sediment contamination, the determination of target-compound concentrations by e.g. mass spectrometric methods is not sufficient to explain sediment toxicity. Due to the presence of a multitude of environmental contaminants in this complex matrix causing a mixed toxicity, the identification and assessment of main toxicants is a challenge. One approach in identifying main toxicants is the application of effect-directed analysis (EDA). In this study, an EDA approach was developed using high performance thin layer chromatography (HPTLC) coupled to bioluminescence bacteria detection with Aliivibrio fischeri for the determination of marine sediments acute toxicity. In a first attempt, the HPTLC separation was optimized with a fast, two-step gradient to separate main hydrophobic organic contaminant (HOC) classes found in marine sediments. An easy-to-use evaluation script for the resulting bioluminescence inhibition images was programed using R. The developed method was applied to sediment extracts of two different sample sets: (i) Fourteen marine sediment samples from the German Bight representing a wide range of contaminant loads and sediment properties and (ii) sediment samples from a core representing temporal trends of contamination. Results from the HPTLC-bioluminescence bacteria assay were compared to HOC concentrations determined by GC-MS/MS. A correlation of the determined inhibition Γ-values for the PAH inhibition zone to PAH concentrations showed a very good agreement (R² = 0.91). The results of this study were used to evaluate the suitability of the EDA approach to be used as an assessment tool for marine sediments.

To freeze, or not to freeze: the impact of subzero temperature on quantifying organic contaminants in ocean sediments

Assessing the extent of ocean bed contamination by anthropogenic organic chemicals requires collecting and preserving the native state of sediments. The latter is particularly important since most sediment analyses are performed away from the sites of samples collection. Preservation, however, is presumptuous since commonly used sediment handling practices such as freezing are structurally disruptive, the impacts of which are not well understood. In this study, the impact of freezing on quantifying the total organic carbon (TOC) contents and the extent of PAH, DDT and PCB contamination in 17 split-paired sediment samples was investigated. The samples were collected from the Santa Monica Bay, California (USA). One-half of each split-pair was frozen at -20 °C and the other half was refrigerated at 4 °C for up to 11 days. The results suggest that no significant differences exist between the frozen and the refrigerated datasets for PCBs (F1,28 = 4.01, p > 0.05), DDTs (n = 16, t-Stat < t-Critical, p > 0.05) or TOC (n = 16, t-Stat < t-Critical, p > 0.05). The results however show that less PAHs were detected in the frozen sediments (F1,24 = 8.18, p < 0.05) than in the refrigerated sediments; the larger PAHs were affected the most. Interestingly, while benzo[a]pyrene, a large PAH molecule, was affected by this apparent temperature-induced difference, its structural isomer, benzo[e]pyrene, was not. Even more interesting was the finding that while non-coplanar PCBs were affected similarly, the coplanar PCBs were not. Overall, sediment freezing within this study's timeframe appears to offer little contextual advantage over sediment refrigeration.

Critical assessment and integration of separate lines of evidence for risk assessment of chemical mixtures

Humans are exposed to multiple chemicals on a daily basis instead of to just a single chemical, yet the majority of existing toxicity data comes from single-chemical exposure. Multiple factors must be considered such as the route, concentration, duration, and the timing of exposure when determining toxicity to the organism. The need for adequate model systems (in vivo, in vitro, in silico and mathematical) is paramount for better understanding of chemical mixture toxicity. Currently, shortcomings plague each model system as investigators struggle to find the appropriate balance of rigor, reproducibility and appropriateness in mixture toxicity studies. Significant questions exist when comparing single-to mixture-chemical toxicity concerning additivity, synergism, potentiation, or antagonism. Dose/concentration relevance is a major consideration and should be subthreshold for better accuracy in toxicity assessment. Previous work was limited by the technology and methodology of the time, but recent advances have resulted in significant progress in the study of mixture toxicology. Novel technologies have added insight to data obtained from in vivo studies for predictive toxicity testing. These include new in vitro models: omics-related tools, organs-on-a-chip and 3D cell culture, and in silico methods. Taken together, all these modern methodologies improve the understanding of the multiple toxicity pathways associated with adverse outcomes (e.g., adverse outcome pathways), thus allowing investigators to better predict risks linked to exposure to chemical mixtures. As technology and knowledge advance, our ability to harness and integrate separate streams of evidence regarding outcomes associated with chemical mixture exposure improves. As many national and international organizations are currently stressing, studies on chemical mixture toxicity are of primary importance.

Alternative Management of Oil and Gas Produced Water Requires More Research on Its Hazards and Risks

Produced water is the largest waste stream associated with oil and gas exploration and production operations. Most produced water generated onshore is managed by permitted injection in deep underground wells, but alternative disposal options including reuse are increasingly being considered. However, insufficient understanding of the composition and toxicity of produced water imposes significant constraints on effective management of potential short-term and long-term risks associated with such alternative uses. As interest builds for management options, such as surface discharge, livestock watering, irrigation, and other industrial uses, research is needed to assess produced-water hazards and exposures to both humans and the environment. This challenge affords an opportunity to capitalize on emerging risk assessment tools. Innovative and comprehensive approaches to filling data gaps and assessing produced water risks will be imperative. A group of experts from industry, academia, and government were assembled to define research needs to support objective decision making on the acceptability, or lack thereof, of produced water disposal alternatives. Presented here are key outcomes from that workshop and recommendations for a research framework to assess toxicity of produced water and associated risks from above ground discharge and reuse options. Integr Environ Assess Manag 2019;15:677-682. © 2019 SETAC.

Integration of fish cell cultures in the toxicological assessment of effluents

The pollution by industrial and municipal effluents are major sources of concerns. Fish cell cultures were applied in different strategies of the evaluation of effluents, particularly whole toxicity, toxicity identification evaluation and mode of action studies based in adverse outcome pathways. Whole effluent toxicity was evaluated using a battery of five model systems from four trophic levels: Daphnia magna was the most sensitive system, followed by the hepatoma fish cell line PLHC-1, the bacterium Allivibrio fischeri, the fibroblastic fish cell line RTG-2 and the algae Chlorella vulgaris, detecting a risk of eutrofization. The uptake of neutral red was more sensitive than the content of protein assay. The main morphological alterations observed were cell loss, hydropic degeneration, and a general loss of lysosomes and of their perinuclear distribution. The toxicity was characterized in PLHC-1 cells through toxicity identification evaluation, in which a partial reduction with graduation at pH 11, filtration, aeration and addition of thiosulfate or EDTA was shown; on the other hand, a low sorption in solid phase extraction suggested that the main responsible were not organic compounds. Consequently, it was not necessary to apply an effect directed analysis HPLC fractionation. In the chemical identification phase, Zn, Cd, As, Cu and Pb were quantified in decreasing concentrations. In the toxicity confirmation phase, a reconstituted sample and individual solutions, presented decreasing toxicity: Zn > Pb > As⁺⁵ > Cd > Cu > As⁺³, the global toxicity being explained by response addition. In the last step, the mode of action was investigated using five specific biomarkers. While metallothionein and succinate dehydrogenase activity were increased, no changes occurred for lysosomal function, acetylcholinesterase and EROD activities, the responsibility of the toxicity for the elements found being confirmed.

Identification of Toxicants from a Highly C10 -C40 -Contaminated Sediment Influenced by the Wood Industry: Petroleum Hydrocarbons or Biogenic Organic Compounds?

Sediment from a log pond located in south Finland contained 15 000 to 50 000 mg/kg dry weight of C₁₀ -C₄₀ hydrocarbons. It was unclear whether they originated from the hydraulic fluid of the log hoist or the wood extractives. In the present study, methods of effect-directed analysis were used for the identification of toxicants. A combination of fractionation, biotesting, and chemical analyses revealed that the key toxicant of log pond sediment was retene, a dialkyl-substituted phenanthrene derived from wood resin acids. In addition, the most toxic fraction included 3 other wood-originated diterpenic compounds. Typical wood extractives such as sesquiterpenes and odd-carbon number alkanes in the range C₂₁ -C₃₃ were identified in the fraction, which showed minor genotoxic potency. The most polar fraction contained triterpenes and showed estrogenic activity. No evidence for the presence of hydraulic fluid in sediment was found. The study also indicated that in cases where the organic matter content of sediment or soil is high, using the results of standard mineral oil analysis in risk management can lead to incorrect actions because standard methods do not differentiate petroleum hydrocarbons from biogenic hydrocarbons. Environ Toxicol Chem 2019;9999:1-11. © 2019 SETAC.

The role of analytical chemistry in exposure science: Focus on the aquatic environment

Exposure science, in its broadest sense, studies the interactions between stressors (chemical, biological, and physical agents) and receptors (e.g. humans and other living organisms, and non-living items like buildings), together with the associated pathways and processes potentially leading to negative effects on human health and the environment. The aquatic environment may contain thousands of compounds, many of them still unknown, that can pose a risk to ecosystems and human health. Due to the unquestionable importance of the aquatic environment, one of the main challenges in the field of exposure science is the comprehensive characterization and evaluation of complex environmental mixtures beyond the classical/priority contaminants to new emerging contaminants. The role of advanced analytical chemistry to identify and quantify potential chemical risks, that might cause adverse effects to the aquatic environment, is essential. In this paper, we present the strategies and tools that analytical chemistry has nowadays, focused on chromatography hyphenated to (high-resolution) mass spectrometry because of its relevance in this field. Key issues, such as the application of effect direct analysis to reduce the complexity of the sample, the investigation of the huge number of transformation/degradation products that may be present in the aquatic environment, the analysis of urban wastewater as a source of valuable information on our lifestyle and substances we consumed and/or are exposed to, or the monitoring of drinking water, are discussed in this article. The trends and perspectives for the next few years are also highlighted, when it is expected that new developments and tools will allow a better knowledge of chemical composition in the aquatic environment. This will help regulatory authorities to protect water bodies and to advance towards improved regulations that enable practical and efficient abatements for environmental and public health protection.

Identifying Organic Toxicants in Sediment Using Effect-Directed Analysis: A Combination of Bioaccessibility-Based Extraction and High-Throughput Midge Toxicity Testing

Toxicity identification evaluation (TIE) and effect-directed analysis (EDA) were integrated to diagnose toxicity drivers in a complex system, such as sediment. In TIE manipulation, XAD resin was utilized as an amending agent for characterizing organic toxicants, which also facilitate a large-volume bioaccessibility-based extraction for EDA purposes. Both raw sediments in TIE and extract fractions in EDA were tested with Chironomus dilutus for toxicity using whole-sediment testing and a high-throughput microplate assay. This allowed for a direct link between whole-sediment TIE and EDA, which strongly strengthened the characterization and identification of toxicants. Sediments amended with XAD resin, as part of the TIE, significantly reduced midge mortality compared with unamended sediments, suggesting that organics were one class of main toxicants. On the basis of bioaccessible concentrations in sediment measured by XAD extraction, a group of previously unidentified contaminants, synthetic polycyclic musks (versalide, tonalide, and galaxolide), were found to explain 32-73% of the observed toxicity in test sediments. Meanwhile, three pyrethroids contributed to an additional 17-35% of toxicity. Surprisingly, the toxicity contribution of musks and pyrethroids reached 58-442 and 56-1625%, respectively, based on total sediment concentrations measured by exhaustive extraction. This suggested that total sediment concentrations significantly overestimated toxicity and that bioavailability should be considered in toxicity identification. Identifying nontarget toxicants sheds a light on application of the integrated TIE and EDA method in defining causality in a complex environment.

Environmental concentrations of azinphos-methyl cause different toxic effects without affecting the main target (cholinesterases) in the freshwater gastropod Biomphalaria straminea

Organophosphate insecticides (OPs) are commonly used in Argentina and around the world for pest control in food crops. They exert their toxicity through the inhibition of the enzyme acetylcholinesterase. In the present study, we aimed to evaluate biochemical and reproductive effects in Biomphalaria straminea, a freshwater gastropod naturally distributed in Argentina, of subchronic exposures to environmental azinphos-methyl concentrations (20 and 200 µg L^-1). For biochemical parameters, adult organisms were exposed for 14 days and the activity of cholinesterases (ChEs), carboxylesterases (CEs), glutathione S-transferase (GST), catalase (CAT), superoxide dismutase (SOD), the production of reactive oxygen species (ROS), the total antioxidant capacity (TAC), glycogen and proteins were determined. For reproductive parameters, the egg masses of B. straminea were exposed to azinphos-methyl for one month, and the hatching time and success as well as the offspring survival were registered. We found different toxic effects elicited by the insecticide on the studied biomarkers. CEs activity was significantly inhibited while CAT and GST activities, ROS production and TAC were significantly increased, with respect to the solvent control group. ChE and SOD activities and protein and glycogen contents were not altered by azinphos-methyl. The hatching time and success were not statistically different from control. Nevertheless, the offspring survival was severely affected by the insecticide. Our results show that the primary target of the insecticide (ChE) was not inhibited but CEs, GST, CAT, ROS, TAC and offspring survival were sensitive biomarkers and valuable endpoints for subchronic toxicity assessments in this species.

In vitro or not in vitro: a short journey through a long history

The aim of ecotoxicology is to study toxic effects on constituents of ecosystems, with the protection goal being populations and communities rather than individual organisms. In this ecosystem perspective, the use of in vitro methodologies measuring cellular and subcellular endpoints at a first glance appears to be odd. Nevertheless, more recently in vitro approaches gained momentum in ecotoxicology. In this article, we will discuss important application domains of in vitro methods in ecotoxicology. One area is the use of in vitro assays to replace, reduce, and refine (3R) in vivo tests. Research in this field has focused mainly on the use of in vitro cytotoxicity assays with fish cells as non-animal alternative to the in vivo lethality test with fish and on in vitro biotransformation assays as part of an alternative testing strategy for bioaccumulation testing with fish. Lessons learned from this research include the importance of a critical evaluation of the sensitivity, specificity and exposure conditions of in vitro assays, as well as the availability of appropriate in vitro-in vivo extrapolation models. In addition to this classical 3R application, other application domains of in vitro assays in ecotoxicology include the screening and prioritization of chemical hazards, the categorization of chemicals according to their modes of action and the provision of mechanistic information for the pathway-based prediction of adverse outcomes. The applications discussed in this essay may highlight the potential of in vitro technologies to enhance the environmental hazard assessment of single chemicals and complex mixtures at a reduced need of animal testing.

Diagnosis of complex mixture toxicity in sediments: Application of toxicity identification evaluation (TIE) and effect-directed analysis (EDA)

Determining causality of sediment toxicity is of great importance in aquatic risk assessment, but there are tremendous challenges due to joint toxicity of trace pollutants in complex sediment matrices. Two approaches, namely toxicity identification evaluation (TIE) and effect-directed analysis (EDA) have been developed. Conventional sediment TIEs take the advantage of environmental relevance by using whole organism bioassays; however, they suffer from lack of effective methods for specifically identifying major contributors as it typically only evaluates contaminant class rather than specific contaminants. Alternatively, EDA is a powerful tool in identifying causes of sediment toxicity with sophisticated fractionation and chemical analysis of targeted and non-targeted non-polar organic toxicants, but it is not always environmentally relevant due to the use of in-vitro bioassays and exhaustive solvent extraction. An integrated TIE and EDA method would provide an environmentally relevant and toxicant specific approach to effectively determine causality of sediment toxicity by combining the merits of the two methods. Bioavailability-based extraction and dosing techniques are recommended to be incorporated into the integrated method to improve the accuracy of toxicity diagnosis. Besides considering bioavailability in the integrated TIE and EDA approach, the premise of adverse outcome pathways should also be considered. Generally speaking, both TIE and EDA have focused on adverse effects at cellular and organism levels. The addition of trait-based approaches in screening multiple toxicological endpoints helps to extend effects on cellular and organism levels to population level, and provides a better understanding of potential impacts to the community and ecosystem. The outcome pathway underlies the critical role of determining causality in interpreting impacts of complex mixtures to benthic community and aquatic ecosystem.

Potential ecotoxicity of metals leached from antifouling paint particles under different salinities

Antifouling paint particles (APPs) are residues generated during maintenance of vessels. In boat maintenance areas of South America, waste generation and disposal are not completely regulated. Therefore, APPs can enter into the aquatic environment and act as a source of contamination by metals and other biocides. Thus, the aim of the present study was to evaluate the potential ecotoxicity of the metal mixture present in APPs leached under different salinities. Therefore, the copepod Acartia tonsa was exposed to different concentrations of a leachate solution prepared by the addition of APPs (1.25g/L) in artificial saline water (salinities 5, 15 and 30). Thereafter, complexing agents (EDTA and sodium thiosulfate) were added to the experimental media in order to evaluate metal influence in APPs toxicity. APPs leachate solutions were very toxic to A. tonsa, reaching an estimated LC₅₀ of 1% at salinities 5% and 15%, and 2% at salinity 30. The addition of the chelators in leachate solutions showed that metals are the major responsible compounds for the observed toxicity. Moreover, results from the calculated toxic units suggested a slightly synergic effect between Cu and Zn in the paint formulation. A metal speciation modelling showed that Zn was predominant as a free ion at all salinities, therefore, explaining the high leachate toxicity. Furthermore, the release of Zn was observed more at lower salinities, whereas Cu was observed at higher salinities. APPs are frequently released in estuarine systems, under conditions of salinity gradients. Therefore, navigated estuaries might be under the threat of this neglected residue.

Towards a holistic and solution-oriented monitoring of chemical status of European water bodies: how to support the EU strategy for a non-toxic environment?

The definition of priority substances (PS) according to the Water Framework Directive (WFD) helped to remove many of these chemicals from the market and to reduce their concentrations in the European water bodies. However, it could not prevent that many of these chemicals have been replaced by others with similar risks. Today, monitoring of the PS-based chemical status according to WFD covers only a tiny fraction of toxic risks, extensively ignores mixture effects and lacks incentives and guidance for abatement. Thus, we suggest complement this purely status-related approach with more holistic and solution-oriented monitoring, which at the same time helps to provide links to the ecological status. Major elements include (1) advanced chemical screening techniques supporting mixture risk assessment and unraveling of source-related patterns in complex mixtures, (2) effect-based monitoring for the detection of groups of chemicals with similar effects and the establishment of toxicity fingerprints, (3) effect-directed analysis of drivers of toxicity and (4) to translate chemical and toxicological fingerprints into chemical footprints for prioritization of management measures. The requirement of more holistic and solution-oriented monitoring of chemical contamination is supported by the significant advancement of appropriate monitoring tools within the last years. Non-target screening technology, effect-based monitoring and basic understanding of mixture assessment are available conceptually and in research but also increasingly find their way into practical monitoring. Substantial progress in the development, evaluation and demonstration of these tools, for example, in the SOLUTIONS project enhanced their acceptability. Further advancement, integration and demonstration, extensive data exchange and closure of remaining knowledge gaps are suggested as high priority research needs for the next future to bridge the gap between insufficient ecological status and cost-efficient abatement measures.

The role of bioassays in the evaluation of ecotoxicological aspects within the PEF/OEF protocols: The case of WWTPs

The suitability evaluation of any industrial process should rely on economic, technical, social and, in particular, environmental aspects. The Commission Recommendation 2013/179/UE enables the improvement and the harmonization of the conventional evaluation of environmental footprints, such as LCA (Life Cycle Assessment), Carbon and Water Footprint, by suggesting the assessment of life cycle environmental performance of products and organisations (PEF, OEF). Novelty aspects reside in including new impact categories (namely, human toxicity cancer effects, human toxicity not-cancer effects and eco-toxicity). This paper presents an application of PEF/OEF protocol to the example case of an activated sludge wastewater treatment plant. Strengths and criticisms of this approach are discussed, by taking into consideration the possible final goal of the suitability assessment. Valuably, the adoption of bioassays (i.e., the input of their results in the models for calculating the life cycle environmental performance) for a more reliable evaluation of the impact on the ecosystem and human health is proposed.

Improving the accuracy of effect-directed analysis: the role of bioavailability

Aquatic ecosystems have been suffering from contamination by multiple stressors. Traditional chemical-based risk assessment usually fails to explain the toxicity contributions from contaminants that are not regularly monitored or that have an unknown identity. Diagnosing the causes of noted adverse outcomes in the environment is of great importance in ecological risk assessment and in this regard effect-directed analysis (EDA) has been designed to fulfill this purpose. The EDA approach is now increasingly used in aquatic risk assessment owing to its specialty in achieving effect-directed nontarget analysis; however, a lack of environmental relevance makes conventional EDA less favorable. In particular, ignoring the bioavailability in EDA may cause a biased and even erroneous identification of causative toxicants in a mixture. Taking bioavailability into consideration is therefore of great importance to improve the accuracy of EDA diagnosis. The present article reviews the current status and applications of EDA practices that incorporate bioavailability. The use of biological samples is the most obvious way to include bioavailability into EDA applications, but its development is limited due to the small sample size and lack of evidence for metabolizable compounds. Bioavailability/bioaccessibility-based extraction (bioaccessibility-directed and partitioning-based extraction) and passive-dosing techniques are recommended to be used to integrate bioavailability into EDA diagnosis in abiotic samples. Lastly, the future perspectives of expanding and standardizing the use of biological samples and bioavailability-based techniques in EDA are discussed.

Contribution of pyrethroids in large urban rivers to sediment toxicity assessed with benthic invertebrates Chironomus dilutus: A case study in South China

The importance of pyrethroids as potential stressors to benthic organisms has gradually become evident in urban creeks; however, the occurrence and toxicity of sediment-associated pyrethroids are rarely studied in large rivers. In this context, 10 sediments from a large urban river (Guangzhou reach of the Pearl River in China) were assessed for pyrethroid occurrence and sediment toxicity to the benthic invertebrate Chironomus dilutus. One half of the sediments exhibited lethality to C. dilutus in a 10-d exposure and all surviving midges showed significant change of enzymatic activity. Moreover, mortality occurred during a 20-d exposure for all the sediments, in accordance with the high hazard quotients to benthic species estimated from pyrethroid residues in sediment. Pyrethroids were detectable in all sediments with the concentrations ranging from 2.43 to 61.2 ng/g dry weight, and permethrin and cypermethrin dominated pyrethroid composition. Acute toxic units for pyrethroids ranged from 0.03 to 0.56 (cypermethrin accounted for 13-81%) and showed a direct relationship with sediment mortality among the midges. This is consistent with the studies on small creeks in Guangzhou in which sediment-bound cypermethrin was found as a main stressor to benthic invertebrates. Comparatively, sediment toxicity and pyrethroid residues in large rivers were significantly lower than those in nearby creeks (urban tributaries). The difference may be partially explained by differing flow rates and water-carrying capacity among waterbodies at different scales; further validation is required. Overall, extensive use of pyrethroids has caused a threat to benthic species not only in small creeks but also in large rivers. Environ Toxicol Chem 2017;36:3367-3375. © 2017 SETAC.

Toxicities and risk assessment of heavy metals in sediments of Taihu Lake, China, based on sediment quality guidelines

The occurrence, toxicities, and ecological risks of five heavy metals (Pb, Cu, Cd, Zn and Ni) in the sediment of Taihu Lake were investigated in this study. To evaluate the toxicities caused by the heavy metals, the toxicities induced by organic contaminants and ammonia in the sediments were screened out with activated carbon and zeolite. The toxicities of heavy metals in sediments were tested with benthic invertebrates (tubificid and chironomid). The correlations between toxicity of sediment and the sediment quality guidelines (SQGs) derived previously were evaluated. There were significant correlations (p<0.0001) between the observed toxicities and the total risk quotients of the heavy metals based on SQGs, indicating that threshold effect level (TEL) and probable effect level (PEL) were reliable to predict the toxicities of heavy metals in the sediments of Taihu Lake. By contrast, the method based on acid volatile sulfides (AVS) and simultaneously extracted metals (SEM), such as ∑SEM/AVS and ∑SEM-AVS, did not show correlations with the toxicities. Moreover, the predictive ability of SQGs was confirmed by a total predicting accuracy of 77%. Ecological risk assessment based on TELs and PELs showed that the contaminations of Pb, Cu, Cd and Zn in the sediments of Taihu Lake were at relatively low or medium levels. The risks caused by heavy metals in the sediments of northern bay of the lake, which received more wastewater discharge from upper stream, were higher than other area of the lake.

European demonstration program on the effect-based and chemical identification and monitoring of organic pollutants in European surface waters

Growing concern about the adverse environmental and human health effects of a wide range of micropollutants requires the development of novel tools and approaches to enable holistic monitoring of their occurrence, fate and effects in the aquatic environment. A European-wide demonstration program (EDP) for effect-based monitoring of micropollutants in surface waters was carried out within the Marie Curie Initial Training Network EDA-EMERGE. The main objectives of the EDP were to apply a simplified protocol for effect-directed analysis, to link biological effects to target compounds and to estimate their risk to aquatic biota. Onsite large volume solid phase extraction of 50 L of surface water was performed at 18 sampling sites in four European river basins. Extracts were subjected to effect-based analysis (toxicity to algae, fish embryo toxicity, neurotoxicity, (anti-)estrogenicity, (anti-)androgenicity, glucocorticoid activity and thyroid activity), to target analysis (151 organic micropollutants) and to nontarget screening. The most pronounced effects were estrogenicity, toxicity to algae and fish embryo toxicity. In most bioassays, major portions of the observed effects could not be explained by target compounds, especially in case of androgenicity, glucocorticoid activity and fish embryo toxicity. Estrone and nonylphenoxyacetic acid were identified as the strongest contributors to estrogenicity, while herbicides, with a minor contribution from other micropollutants, were linked to the observed toxicity to algae. Fipronil and nonylphenol were partially responsible for the fish embryo toxicity. Within the EDP, 21 target compounds were prioritized on the basis of their frequency and extent of exceedance of predicted no effect concentrations. The EDP priority list included 6 compounds, which are already addressed by European legislation, and 15 micropollutants that may be important for future monitoring of surface waters. The study presents a novel simplified protocol for effect-based monitoring and draws a comprehensive picture of the surface water status across Europe.