Zinc is the toxic factor in the lung response to an atmospheric particulate sample

Experimental factors influencing the bioaccessibility and the oxidative potential of transition metals from welding fumes

Inhalation of welding fumes (WFs) containing high levels of transition metals (Cr, Cu, Fe, Mn, Ni…) is associated with numerous health effects including oxidative stress. However, the measurements of the oxidative potential (OP) and bioaccessibility of WF transition metals depend on several physicochemical parameters and may be subject to several experimental artifacts. In this work, we investigated the influence of the experimental conditions that may affect the bioaccessibility of transition metals and their OP on stainless-steel WF extracts. WFs were produced using a generation bench and sampled on filters. The soluble fraction of the metals was analysed. Two different extraction fluids mimicking physiological pulmonary conditions were studied: phosphate buffer and Hatch's solution. Three extraction times were tested to determine the optimal time for a significant OPDTT using the dithiothreitol (DTT) method. The storage conditions of WFs after filter sampling such as duration, temperature and atmospheric conditions were investigated. The results indicate that experimental conditions can significantly affect the OPDTT and metal bioaccessibility analyses. Cr, Cu and Ni show higher solubility in Hatch's solution than in the phosphate buffer. Mn is highly sensitive to DTT and shows close solubility in the two fluids. An extraction time of 0.5 h in phosphate buffer allows a better sensitivity to OPDTT, probably by limiting complexations, interactions between metals and precipitation. Storage time and temperature can influence the physical or chemical evolution of the WFs, which can affect their OPDTT and Mn solubility. However, storage under N2(g) limits these changes. On-line measurements of OPDTT could provide an alternative to filter sampling to overcome these artifacts.

Size-segregated source identification of water-soluble and water-insoluble metals and trace elements of coarse and fine PM in central Los Angeles

In this study, the water-solubility and sources of metals and trace elements in both fine and coarse particulate matter (PM) were investigated in Central Los Angeles. Sampling was performed in the winter, spring, and summer of 2022 at the Particle Instrumentation Unit (PIU) of the University of Southern California located in the proximity of I-110 freeway. Both fine and coarse PM samples were collected using Personal Cascade Impactors (PCIS) and chemically analyzed to determine their water-soluble and water-insoluble metal content. Principal Component Analysis (PCA) and Multiple Linear Regression (MLR) were used to determine the sources of soluble and insoluble metals and obtain their contributions to total metal concentration. Our results indicate that the water-solubility of most of the metals is higher in the fine size fraction compared to the coarse fraction. Seasonal variations in the water solubility of selected metals for both coarse and fine fractions were observed, with higher water-soluble metal concentrations in summer for several species (e.g., Fe , S, Pb, Cu, La, Ni, and Al ), possibly due to higher photochemical processing, while in winter, almost all species exhibited higher insoluble fraction concentrations. The PCA and MLR analyses results showed that tire and brake wear was the most significant contributor to the total metals for both fine soluble and insoluble portions, accounting for 35% and 75% of the total metals, respectively. Combustion sources also contributed substantially to water-soluble metals for fine and coarse size ranges, representing 40% and 32% of the total metal mass, respectively. In addition, mineral dust and soil and re-suspended dust were identified as the highest contributors to coarse metals. The MLR analysis also revealed that secondary aerosols contributed 11% to the fine water-soluble metals. Our results suggest that non-tailpipe emissions significantly contribute to both coarse and fine PM metals in the Central Los Angeles region.

Potential Impacts of Energy and Vehicle Transformation Through 2050 on Oxidative Stress-Inducing PM2.5 Metals Concentration in Japan

The impacts of renewable energy shifting, passenger car electrification, and lightweighting through 2050 on the atmospheric concentrations of PM2.5 total mass and oxidative stress-inducing metals (PM2.5-Fe, Cu, and Zn) in Japan were evaluated using a regional meteorology-chemistry model. The surface concentrations of PM2.5 total mass, Fe, Cu, and Zn in the urban area decreased by 8%, 13%, 18%, and 5%, respectively. Battery electric vehicles (BEVs) have been considered to have no advantage in terms of non-exhaust PM emissions by previous studies. This is because the disadvantages (heavier weight increases tire wear, road wear, and resuspention) offset the advantages (regenerative braking system (RBS) reduces brake wear). However, the future lightweighting of drive battery and body frame were estimated to reduce all non-exhaust PM. Passenger car electrification only reduced PM2.5 concentration by 2%. However, Fe and Cu concentrations were more reduced (-8% and -13%, respectively) because they have high brake wear-derived and significantly reflects the benefits of BEV's RBS. The water-soluble fraction concentration of metals (induces oxidative stress in the body) was estimated based on aerosol acidity. The reduction of SOx, NOx, and NH3 emissions from on-road and thermal power plants slightly changed the aerosol acidity (pH ± 0.2). However, it had a negligible effect on water-soluble metal concentrations (maximum +2% for Fe and +0.5% for Cu and Zn). Therefore, the metal emissions reduction was more important than gaseous pollutants in decreasing the water-soluble metals that induces respiratory oxidative stress and passenger car electrification and lightweighting were effective means of achieving this.

The role of chemical fractionation in risk assessment of toxic metals: a review

The identification of highly toxic metals like Cd, Ni, Pb, Cr, Co or Cu in ambient particulate matter (PM) has garnered a lot of interest recently. Exposure to toxic metals, including carcinogenic ones, at levels above recommended limits, can significantly affect human health. Prolonged exposure to even trace amounts of toxic or essential metals can also have negative health impacts. In order to assess significant risks, it is crucial to govern the concentrations of bioavailable/bio-accessible metals that are available in PM. Estimating the total metal concentrations in PM is only an approximation of metal toxicity. This review provides an overview of various procedures for extracting soluble toxic metals from PM and the importance of chemical fractionation in risk assessment. It is observed that the environmental risk indices such as bioavailability index (BI), contamination factor (CF) and risk assessment code (RAC) are specifically influenced by the concentration of these metals in a particular fraction. Additionally, there is compelling evidence that health risks assessed using total metal concentrations may be overestimated, therefore, the metal toxicity assessment is more accurate and more sensitive to the concentration of the bioavailable/bio-accessible fraction than the total metal concentrations. Hence, chemical fractionation of toxic metals can serve as an effective tool for developing environmental protection laws and improving air quality monitoring programs for public health.

Are iron ore microparticles toxic for the European clam Ruditapes decussatus? Response elements from biomarker activities and in silico modeling

Inevitably, high concentrations of iron, the most widely produced ore globally, can be found in aquatic environments. To assess the toxicity of iron on aquatic organisms, Ruditapes decussatus specimens were subjected to microparticles derived from two types of iron ore (hematite and magnetite) at four different concentrations (0.5, 1, 1.5, and 5 g/L). The findings revealed that both types of iron ore were absorbed by clams in a concentration-dependent manner. Biomarkers analysis demonstrated significant and organ-specific impacts on the health of the clams caused by these microparticles, which was further supported by computational analyses on bioavailability. Within seven days of exposure, changes were observed in the activities of several enzymes, including catalase, acetylcholinesterase, and glutathione S-transferases, as well as in the rate of lipid peroxidation in both the digestive gland and gills. This study provides an environmental perspective on the toxicological effects of iron ore microparticles.

Effects of Zinc on the Right Cardiovascular Circuit in Long-Term Hypobaric Hypoxia in Wistar Rats

Hypobaric hypoxia under chromic conditions triggers hypoxic pulmonary vasoconstriction (HPV) and right ventricular hypertrophy (RVH). The role of zinc (Zn) under hypoxia is controversial and remains unclear. We evaluated the effect of Zn supplementation in prolonged hypobaric hypoxia on HIF2α/MTF-1/MT/ZIP12/PKCε pathway in the lung and RVH. Wistar rats were exposed to hypobaric hypoxia for 30 days and randomly allocated into three groups: chronic hypoxia (CH); intermittent hypoxia (2 days hypoxia/2 days normoxia; CIH); and normoxia (sea level control; NX). Each group was subdivided (n = 8) to receive either 1% Zn sulfate solution (z) or saline (s) intraperitoneally. Body weight, hemoglobin, and RVH were measured. Zn levels were evaluated in plasma and lung tissue. Additionally, the lipid peroxidation levels, HIF2α/MTF-1/MT/ZIP12/PKCε protein expression and pulmonary artery remodeling were measured in the lung. The CIH and CH groups showed decreased plasma Zn and body weight and increased hemoglobin, RVH, and vascular remodeling; the CH group also showed increased lipid peroxidation. Zn administration under hypobaric hypoxia upregulated the HIF2α/MTF-1/MT/ZIP12/PKCε pathway and increased RVH in the intermittent zinc group. Under intermittent hypobaric hypoxia, Zn dysregulation could participate in RVH development through alterations in the pulmonary HIF2α/MTF1/MT/ZIP12/PKCε pathway.

Assessing oxidative stress induction ability and oxidative potential of PM2.5 in cities in eastern and western Japan

Oxidative stress is an important cause of respiratory diseases associated with exposure to PM_2.5. Accordingly, acellular methods for assessing the oxidative potential (OP) of PM_2.5 have been evaluated extensively for use as indicators of oxidative stress in living organisms. However, OP-based assessments only reflect the physicochemical properties of particles and do not consider particle-cell interactions. Therefore, to determine the potency of OP under various PM_2.5 scenarios, oxidative stress induction ability (OSIA) assessments were performed using a cell-based method, the heme oxygenase-1 (HO-1) assay, and the findings were compared with OP measurements obtained using an acellular method, the dithiothreitol assay. For these assays, PM_2.5 filter samples were collected in two cities in Japan. To quantitatively determine the relative contribution of the quantity of metals and subtypes of organic aerosols (OA) in PM_2.5 to the OSIA and the OP, online measurements and offline chemical analysis were also performed. The findings showed a positive relationship between the OSIA and OP for water-extracted samples, confirming that the OP is generally well suited for use as an indicator of the OSIA. However, the correspondence between the two assays differed for samples with a high water-soluble (WS)-Pb content, which had a higher OSIA than would be expected from the OP of other samples. The results of reagent-solution experiments showed that the WS-Pb induced the OSIA, but not the OP, in 15-min reactions, suggesting a reason for the inconsistent relationship between the two assays across samples. Multiple linear regression analyses and reagent-solution experiments showed that WS transition metals and biomass burning OA accounted for approximately 30-40% and 50% of the total OSIA or the total OP of water-extracted PM_2.5 samples, respectively. This is the first study to evaluate the association between cellular oxidative stress assessed by the HO-1 assay and the different subtypes of OA.

Insights into reactive oxygen species formation induced by water-soluble organic compounds and transition metals using spectroscopic method

Ambient particulate matter (PM) can cause adverse health effects via their ability to produce Reactive Oxygen Species (ROS). Water-Soluble Organic Compounds (WSOCs), a complex mixture of organic compounds which usually coexist with Transition Metals (TMs) in PM, have been found to contribute to ROS formation. However, the interaction between WSOCs and TMs and its effect on ROS generation are still unknown. In this study, we examined the ROS concentrations of V, Zn, Suwannee River Fulvic Acid (SRFA), Suwannee River Humic Acid (SRHA) and the mixtures of V/Zn and SRFA/SRHA by using a cell-free 2',7'-Dichlorodihydrofluorescein (DCFH) assay. The results showed that V or Zn synergistically promoted ROS generated by SRFA, but had an antagonistic effect on ROS generated by SRHA. Fluorescence quenching experiments indicated that V and Zn were more prone to form stable complexes with aromatic humic acid-like component (C1) and fulvic acid-like component (C3) in SRFA and SRHA. Results suggested that the underlying mechanism involving the fulvic acid-like component in SRFA more tending to complex with TMs to facilitate ROS generation through π electron transfer. Our work showed that the complexing ability and complexing stability of atmospheric PM organics with metals could significantly affect ROS generation. It is recommended that the research deploying multiple analytical methods to quantify the impact of PM components on public health and environment is needed in the future.

Dynamic landscape of multi-elements in PM2.5 revealed by real-time analysis

Metal components in fine particulate matter (PM_2.5) are closely associated with many adverse health outcomes. Dynamic changes of metals in PM_2.5 are critical for risk assessment due to their temporal variations. Herein, an online method for real-time determination of multi-elements (As, Cd, Cs, Cu, Fe, Mg, Mn, Pb, Rb, Sn, Tl, and V) in PM_2.5 was established by directly introducing air samples into inductively coupled plasma mass spectrometry (ICPMS). Meanwhile, a quantified method using metal standard aerosols (Cr, Mo, and W) and high time resolution for 3.3 min online measurement was developed and validated. The limits of detection were in the range of 0.001-6.30 ng/m³ for different metals. Subsequently, the real-time contents of multi-elements in PM_2.5 for 12 h over 33 days were measured at different air qualities. Temporal variations of crustal elements like Fe, Mg are similar to PM_2.5, whereas toxic elements (Pb, As and Cd) have upward trends at dusk. This denoted the association with various emission sources and different exposure concentrations of metals. In addition to the acquisition of real-time information, online analysis of multi-elements in PM_2.5 is beneficial for atmospheric monitoring and provides critical insights into the different exposure risks of metals in PM_2.5 at varying times.

Inter-annual variability of source contributions to PM10, PM2.5, and oxidative potential in an urban background site in the central mediterranean

Airborne particulate matter (PM) is studied because of its effects on human health and climate change. PM long-term characterisation allows identifying trends and evaluating the outcomes of environmental protection policies. This work is aimed to study the inter-annual variability of PM_2.5 and PM₁₀ concentrations and chemical composition in an urban background site (Italy). A dataset of daily PM_2.5 and PM₁₀ was collected in the period 2016-2017, including the content of OC, EC, major water-soluble ions, main metals, and compared to a similar dataset collected in the period 2013-2014. Oxidative potential using DTT assay (dithiothreitol) was evaluated and expressed in DTT_V as 0.39 nmol/min·m³ in PM₁₀ and 0.29 in PM_2.5 nmol/min·m³. PM source apportionment was computed using the EPA PMF5.0 model and source contributions compared with those of a previous dataset collected between 2013 and 2014. Multi linear regression analysis identified which source contributed (p < 0.05) to the oxidative potential of each size fraction. Inter-annual trends were more evident on PM_2.5 with reductions of biomass burning contribution and increases in traffic contribution in the 2016-2017 period. Crustal contributions were similar for the two periods, in both size fractions. Carbonates were comparable in PM₁₀ with a slight increase in PM_2.5. Sea spray decreased in PM₁₀. The DTT_V of PM_2.5 peaked during cold periods, while, the DTT_V of the PM_10-2.5 fraction peaked in summer, suggesting that different sources, with different seasonality, influence OP in the PM_2.5 and PM_10-2.5 fractions. Analysis showed that sea spray, crustal, and carbonates sources contribute ∼13.6% to DTT_V in PM_2.5 and ∼62.4% to DTT_V in PM_10-2.5. Combustion sources (biomass burning and traffic) contribute to the majority of DTT_V (50.6%) in PM_2.5 and contribute for ∼26% to DTT_V in PM_10-2.5. Secondary nitrate contributes to DTT_V in both fine and coarse fraction; secondary sulphate contribute to DTT_V in PM_2.5 with negligible contributions to DTT_V in PM_10-2.5.

Acute cardiovascular effects of inhaled ambient particulate matter: Chemical composition-related oxidative stress, endothelin-1, blood pressure, and ST-segment changes in Wistar rats

Short-term increases in particulate matter (PM) are associated with heightened morbidity and mortality from cardiovascular causes. Inhalation of PM is known to increase endothelin (ET)-1 levels. Yet, less is known about particle composition-related changes at the molecular level including the endothelinergic system and relationship with cardiovascular function changes. In this work, adult Wistar male rats were exposed for 4 h by nose-only inhalation to clean air, Ottawa urban particles (EHC-93, 48 mg/m³) and water-leached (EHC-93L, 49 mg/m³) particles, to examine the effect of particle compositional changes on oxidative stress, circulating ETs, blood pressure, and heart electrophysiology. Particle deposition in the respiratory compartment was estimated at 85 μg (25 ng/cm²). Lung cell proliferation was low in both treatment groups, indicating absence of acute injury. Inhalation of EHC-93 caused statistically significant elevations (p < 0.05) of oxidative stress markers, ET-1, ET-3, blood pressure, and a decrease of ST-segment duration in the ECG at 1.5 days post-exposure. Leached particles (EHC-93L) caused rapid but transient elevation (p < 0.05) of oxidative stress, ET-1, ET-2, and ET-3 at earlier time points, with no changes in blood pressure or ST-segment. These results demonstrate that inhalation of urban particles at an internal dose inadequate to cause acute lung injury can induce oxidative stress, enhance vasoactive endothelins, leading to vasopressor response, affecting cardiac electrophysiology in Wistar rats, consistent with the cardiovascular impacts of ambient particles in human populations. Change in particle potency after removal of soluble species, notably cadmium, zinc and polar organics suggests that the toxicodynamics of cardiovascular effects can be modified by physicochemical properties of particles.

The Role of Zinc in the Pathogenesis of Lung Disease

Lung diseases, such as asthma, chronic obstructive pulmonary diseases (COPD), and cystic fibrosis (CF), are among the leading causes of mortality and morbidity globally. They contribute to substantial economic burdens on society and individuals. Currently, only a few treatments are available to slow the development and progression of these diseases. Thus, there is an urgent unmet need to develop effective therapies to improve quality of life and limit healthcare costs. An increasing body of clinical and experimental evidence suggests that altered zinc and its regulatory protein levels in the systemic circulation and in the lungs are associated with these disease’s development and progression. Zinc plays a crucial role in human enzyme activity, making it an essential trace element. As a cofactor in metalloenzymes and metalloproteins, zinc involves a wide range of biological processes, such as gene transcription, translation, phagocytosis, and immunoglobulin and cytokine production in both health and disease. Zinc has gained considerable interest in these lung diseases because of its anti-inflammatory, antioxidant, immune, and metabolic modulatory properties. Here we highlight the role and mechanisms of zinc in the pathogenesis of asthma, COPD, CF, acute respiratory distress syndrome, idiopathic pulmonary fibrosis, and pulmonary hypertension.

The Elemental Characteristics and Human Health Risk of PM2.5 during Haze Episode and Non-Haze Episode in Chiang Rai Province, Thailand

Fine particle matter (PM_2.5) was directly related to seasonal weather, and has become the influencing factor of air quality that is harmful for human health in Chiang Rai province. The aims were determining the elemental composition in PM_2.5 and human health risk in haze (March 2021) and non-haze episodes (July–August 2021). Nine elements in PM_2.5 were measured by using an Atomic Absorption Spectrophotometer, and an enrichment factor was used to identify the emission source. The results showed that the average concentration of PM_2.5 was 63.07 μg/m³ in haze episodes, and 25.00 μg/m³ in a non-haze episode. The maximum concentration was 116.7 μg/m³ in March. The majority of elements originated from anthropogenic sources. In haze episodes, PM_2.5 mean concentration was approximately 4.2 times that of the WHO guidelines (15 μg/m³ 24 h), and 1.3 times that of the Thai Ambient Air Quality Standard (50 μg/m³). The analysis of backward air mass trajectory showed that transboundary and local sources significantly influenced PM_2.5 at the monitoring site in the sampling period. In the health risk assessment, the non-carcinogenic risk of Cd was the highest, with a Hazard Quotient (HQ) of 0.048, and the cancer risk of Cr was classified as the highest cancer risk, with the values of 1.29 × 10⁻⁵, higher than the minimum acceptable level.

Chemical Fractionation in Environmental Studies of Potentially Toxic Particulate-Bound Elements in Urban Air: A Critical Review

In recent years, studies of heavy metal air pollution have increasingly gone beyond determining total concentrations of individual toxic metals. Chemical fractionation of potentially toxic elements in airborne particles is becoming an important part of these studies. This review covers the articles that have been published over the last three decades. Attention was paid to the issue of atmospheric aerosol sampling, sample pretreatment, sequential extraction schemes and conditions of individual extractions. Geochemical forms of metals occurring in the air in urban areas were considered in detail. Based on the data sets from chemical fractionation of particulate matter samples by three sequential extraction procedures (SEPs)—Fernández Espinosa, BCR and Chester’s—the compilation of the chemical distribution patterns of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn was prepared. The human health risk posed by these toxic and/or carcinogenic elements via inhalation of atmospheric particles was estimated for two categories of polluted urban areas: the commonly encountered pollution level and the high pollution level.

Pollution characteristics and toxic effects of PM1.0 and PM2.5 in Harbin, China

In 2019, PM_2.5 and PM_1.0 samples were collected in Harbin City, Heilongjiang Province, China, to research their mass concentration, number concentration, metal composition analysis, impact on lung injury of mice, and metal source analysis. The results showed that the mass concentration of PM_2.5 and PM_1.0 in the whole year of 2019 showed a trend of high in winter and low in summer. The mass concentration of PM_1.0 was 62~85% of the total mass concentration of PM_2.5, and the changing trend of PM_1.0 number concentration was lower than that of the two sides. Its size was negatively correlated with the temperature and no significant correlation with the relative humidity. The analysis of metal composition found that the emission of coal and motor vehicle exhaust increased the concentration of Zn, Pb, As, and Cu in PM_1.0. And setting off fireworks and firecrackers during the Spring Festival caused the concentration of Ti, Al, and Mg to increase. The burning of biomass also made the K concentration higher in autumn and winter than the other two-quarters. PMF analysis showed that coal combustion, soil dust and vehicle exhaust were the main factors of PM_1.0 pollution in winter. Electron microscope scanning showed that PM_1.0 particle morphology in winter was mainly flocculent aggregated particles generated by coal combustion. In the study of the effects of atmospheric particulate matter on lung injury in mice, it was found that lactate dehydrogenase (LDH), acid phosphatase (ACP),alkaline phosphatase (AKP), and albumin (ALB) in lung tissue cells of mice exposed to air particulates increased, indicating that PM_2.5 and PM_1.0 had toxic effects on lung tissue cells of mice. The level of serum malondialdehyde (MDA), nitric oxide (NO), and nitric oxide synthase (NOS) in lung lavage fluid increased, and the activity of superoxide dismutase (SOD) decreased, which indicated that both PM_2.5 and PM_1.0 could cause oxidative damage in the body, and with the increase of the concentration of PM_2.5 and PM_1.0 in the air particles, the cytotoxic effect on the lung tissue of mice was enhanced and the degree of oxidative damage was increased.

Exposure to PM2.5 is associated with malignant pleural effusion in lung cancer patients

Air pollution has been recognized to be a risk factor for lung cancer. The objective of this study was to investigate the effects of air pollution on heavy metal alterations in the pleural effusion of lung cancer patients. Pleural effusion was collected from patients with lung cancer and congestive heart failure (CHF). One-year average levels of particulate matter with an aerodynamic diameter of < 10 µm (PM₁₀), PM_2.5, NO₂, and SO₂ were linked to the exposure of these subjects. Traffic-related metals, included Al, Fe, Cu, Zn, and Pb, were determined in the pleural effusion. Logistic regression models were used to examine their associations. There were 63 lung cancer patients and 31 CHF patients enrolled in the current study. We found that PM₁₀, PM_2.5, and NO₂ were negatively correlated with Al in the pleural effusion, whereas PM_2.5 was positively correlated with Zn in the pleural effusion. Increases in 1 μg/m³ of PM_2.5 and 1 ng/mL of Zn were associated with lung cancer (adjusted OR=2.394, 95% CI= 1.446-3.964 for PM_2.5; adjusted OR=1.003, 95% CI=1.000-1.005 for Zn). Increases in PM_2.5 and Zn in the pleural effusion increased the risk of malignant pleural effusion in lung cancer patients (adjusted OR=1.517; 95% CI=1.082-2.127 for PM_2.5; adjusted OR=1.002, 95% CI=1.000-1.005 for Zn). Furthermore, we observed that adenocarcinomas increased in association with a 1-μg/m³ increase in PM_2.5 (crude OR=1.683; 95% CI=1.006-2.817) in lung cancer patients. In conclusion, PM_2.5 exposure and the possible resultant Zn in the pleural effusion associated with the development of malignant pleural effusion in lung cancer.

Phosphate Buffer Solubility and Oxidative Potential of Single Metals or Multielement Particles of Welding Fumes

To evaluate the chemical behavior and the health impact of welding fumes (WF), a complex and heterogeneous mixture of particulate metal oxides, two certified reference materials (CRMs) were tested: mild steel WF (MSWF-1) and stainless steel WF (SSWF-1). We determined their total chemical composition, their solubility, and their oxidative potential in a phosphate buffer (PB) solution under physiological conditions (pH 7.4 and 37 °C). The oxidative potential (OPDTT) of WF CRMs was evaluated using an acellular method by following the dithiothreitol (DTT) consumption rate (µmol DTT L−1 min−1). Pure metal salts present in the PB soluble fraction of the WF CRMs were tested individually at equivalent molarity to estimate their specific contribution to the total OPDTT. The metal composition of MSWF-1 consisted mainly of Fe, Zn, Mn, and Cu and the SSWF-1 composition consisted mainly of Fe, Mn, Cr, Ni, Cu, and Zn, in diminishing order. The metal PB solubility decreased from Cu (11%) to Fe (approximately 0.2%) for MSWF-1 and from Mn (9%) to Fe (<1%) for SSWF-1. The total OPDTT of SSWF-1 is 2.2 times the OPDTT of MSWF-1 due to the difference in oxidative capacity of soluble transition metals. Cu (II) and Mn (II) are the most sensitive towards DTT while Cr (VI), Fe (III), and Zn (II) are barely reactive, even at higher concentrations. The OPDTT measured for both WF CRMs extracts compare well with simulated extracts containing the main metals at their respective PB-soluble concentrations. The most soluble transition metals in the simulated extract, Mn (II) and Cu (II), were the main contributors to OPDTT in WF CRMs extracts. Mn (II), Cu (II), and Ni (II) might enhance the DTT oxidation by a redox catalytic reaction. However, summing the main individual soluble metal DTT response induces a large overestimation probably linked to modifications in the speciation of various metals when mixed. The complexation of metals with different ligands present in solution and the interaction between metals in the PB-soluble fraction are important phenomena that can influence OPDTT depletion and therefore the potential health effect of inhaled WF.

Dynamics of Lead Bioavailability and Speciation in Indoor Dust and X-ray Spectroscopic Investigation of the Link between Ingestion and Inhalation Pathways

Lead (Pb) exposure from household dust is a major childhood health concern because of its adverse impact on cognitive development. This study investigated the absorption kinetics of Pb from indoor dust following a single dose instillation into C57BL/6 mice. Blood Pb concentration (PbB) was assessed over 24 h, and the dynamics of particles in the lung and gastro-intestinal (GI) tract were visualized using X-ray fluorescence (XRF) microscopy. The influence of mineralogy on Pb absorption and particle retention was investigated using X-ray absorption near-edge structure spectroscopy. A rapid rise in PbB was observed between 0.25 and 4 h after instillation, peaking at 8 h and slowly declining during a period of 24 h. Following clearance from the lungs, Pb particles were detected in the stomach and small intestine at 4 and 8 h, respectively. Analysis of Pb mineralogy in the residual particles in tissues at 8 h showed that mineral-sorbed Pb and Pb-phosphates dominated the lung, while organic-bound Pb and galena were the main phases in the small intestines. This is the first study to visualize Pb dynamics in the lung and GI tract using XRF microscopy and link the inhalation and ingestion pathways for metal exposure assessment from dust.

In Vitro, in Vivo, and Spectroscopic Assessment of Lead Exposure Reduction via Ingestion and Inhalation Pathways Using Phosphate and Iron Amendments

This study compared lead (Pb) immobilization efficacies in mining/smelting impacted soil using phosphate and iron amendments via ingestion and inhalation pathways using in vitro and in vivo assays, in conjunction with investigating the dynamics of dust particles in the lungs and gastro-intestinal tract via X-ray fluorescence (XRF) microscopy. Phosphate amendments [phosphoric acid (PA), hydroxyapatite, monoammonium phosphate (MAP), triple super phosphate (TSP), and bone meal biochar] and hematite were applied at a molar ratio of Pb:Fe/P = 1:5. Pb phosphate formation was investigated in the soil/post-in vitro bioaccessibility (IVBA) residuals and in mouse lung via extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structures (XANES) spectroscopy, respectively. EXAFS analysis revealed that anglesite was the dominant phase in the ingestible (<250 μm) and inhalable (<10 μm) particle fractions. Pb IVBA was significantly reduced (p < 0.05) by phosphate amendments in the <250 μm fraction (solubility bioaccessibility research consortium assay) and by PA, MAP, and TSP in the <10 μm fraction (inhalation-ingestion bioaccessibility assay). A 21.1% reduction in Pb RBA (<250 μm fraction) and 56.4% reduction in blood Pb concentration (<10 μm fraction) were observed via the ingestion and inhalation pathways, respectively. XRF microscopy detected Pb in the stomach within 4 h, presumably via mucociliary clearance.

The effects of particle-induced oxidative damage from exposure to airborne fine particulate matter components in the vicinity of landfill sites on Hong Kong

The physical, chemical and bioreactivity characteristics of fine particulate matter (PM_2.5) collected near (<1 km) two landfill sites and downwind urban sites were investigated. The PM_2.5 concentrations were significantly higher in winter than summer. Diurnal variations of PM_2.5 were recorded at both landfill sites. Soot aggregate particles were identified near the landfill sites, which indicated that combustion pollution due to landfill activities was a significant source. High correlation coefficients (r) implied several inorganic elements and water-soluble inorganic ions (vanadium (V), copper (Cu), chloride (Cl^-), nitrate (NO₃^-), sodium (Na) and potassium (K)) were positively associated with wind flow from the landfill sites. Nevertheless, no significant correlations were also identified between these components against DNA damage. Significant associations were observed between DNA damage and some heavy metals such as cadmium (Cd) and lead (Pb), and total Polycyclic Aromatic Hydrocarbons (PAHs) during the summer. The insignificant associations of DNA damage under increased wind frequency from landfills suggested that the PM_2.5 loading from sources such as regional sources was possibly an important contributing factor for DNA damage. This outcome warrants the further development of effective and source-specific landfill management regulations for particulate matter production control to the city.

Pollution Characterization and Source Apportionment of Day and Night PM2.5 Samples in Urban and Suburban Communities of Tianjin (China)

Day and night PM_2.5 samples were collected from two typical urban and suburban communities in Tianjin. The major chemical components in PM_2.5, including the metal elements, polycyclic aromatic hydrocarbons (PAHs), and inorganic water-soluble ions, were monitored. A positive matrix factorization (PMF) model was used to apportion the potential sources of PM_2.5 at the two sites in the daytime and nighttime. The results indicated that the PM_2.5 concentration was higher in the suburban area than in the urban area during the daytime in winter. The daytime and nighttime PAHs concentrations at both sites were both generally higher in winter than in summer. The concentrations of some of the metal elements were higher in summer than in winter. Regional differences and day and night differences in the metals and water-soluble ions commonly existed. The PMF analysis indicated that coal combustion and transportation-related sources were the predominant sources in the urban and suburban areas in the daytime in winter, and secondary aerosols were the most important source for the suburban area in the nighttime in winter. There were more pollution sources of PM_2.5 during the daytime in summer, especially in the suburban area. In the nighttime in summer, the pollution sources of PM_2.5 in the urban and suburbs areas were basically the same, but the source apportionment was quite different.

TRPs in Tox: Involvement of Transient Receptor Potential-Channels in Chemical-Induced Organ Toxicity-A Structured Review

Chemicals can exhibit significant toxic properties. While for most compounds, unspecific cell damaging processes are assumed, a plethora of chemicals exhibit characteristic odors, suggesting a more specific interaction with the human body. During the last few years, G-protein-coupled receptors and especially chemosensory ion channels of the transient receptor potential family (TRP channels) were identified as defined targets for several chemicals. In some cases, TRP channels were suggested as being causal for toxicity. Therefore, these channels have moved into the spotlight of toxicological research. In this review, we screened available literature in PubMed that deals with the role of chemical-sensing TRP channels in specific organ systems. TRPA1, TRPM and TRPV channels were identified as essential chemosensors in the nervous system, the upper and lower airways, colon, pancreas, bladder, skin, the cardiovascular system, and the eyes. Regarding TRP channel subtypes, A1, M8, and V1 were found most frequently associated with toxicity. They are followed by V4, while other TRP channels (C1, C4, M5) are only less abundantly expressed in this context. Moreover, TRPA1, M8, V1 are co-expressed in most organs. This review summarizes organ-specific toxicological roles of TRP channels.

Physiochemical characteristics of aerosol particles collected from the Jokhang Temple indoors and the implication to human exposure

This paper presents a detailed study on the indoor air pollution in the Jokahng Temple at Tibet Plateau, and its implication to human health. The mean concentrations of PM_1.0 and PM_2.5 were 435.0 ± 309.5 and 483.0 ± 284.9 μg/m³, respectively. The PM_2.5 concentration exceeded the National Ambient Air Quality Standard (75 μg/m³) by 6.4 times. The size-segregated aerosols displayed a bimodal distribution. One peak was observed in the fine mode (0.4-2.1 μm) and the other peak appeared in the coarse mode (2.1-9.0 μm). The concentration of the total size-resolved PM was 794.3 ± 84.9 μg/m³. The mass fraction of coarse particles shared by 41.1%, apparently higher than that reported at low altitudes, probably due to incomplete combustion at Tibet Plateau with hypoxic atmospheric environment. The total concentration of polycyclic aromatic hydrocarbons (PAHs) was 331.2 ± 60.3 ng/m³, in which the concentration of benzo(a)pyrene (BaP) was 18.5 ± 4.3 ng/m³, over ten times higher than the maximum permissible risk value of 1 ng/m³ on account of carcinogenic potency of particulate PAHs through inhalation. PAHs exhibited a trimodal distribution, of which two peaks were observed in the fine mode and one peak in the coarse mode. With the aromatic rings increasing, the peak intensity increased in the fine mode. Na, Ca, Al, Mg and K dominated the elemental mass profiles, and metals displayed a bimodal distribution with a dominant peak in the coarse range. The total PAH deposition flux was 123.6 and 53.1 ng/h for adults and children, respectively. Coarse particles contributed most deposition flux in the head region, while fine particles contribute most deposition flux in the alveolar region. The increment lifetime cancer risk (ILCR) of PAHs ranaged at 10^-5-10^-4, indicating potential cancer risk to human health. The total deposition flux of metals was estimated at 1.4-13.2 ng/h. With the size increasing, deposition flux increased in the head region while decreased in the alveolar region. The highest ILCR of Cr and Ni were 4.9 × 10^-5 and 1.5 × 10^-6, respectively, exceeding the permissible risk of 10^-6. The hazard quotient (HQ) of Fe (10^-5-10^-4) and Zn (10^-6-10^-5) were much lower than the safe level of 1.0, and thus they were not considered as a health concern.

Chemical characterization and sources of PM2.5 at 12-hr resolution in Guiyang, China

The increasing emission of primary and gaseous precursors of secondarily formed atmospheric particulate matter due to continuing industrial development and urbanization are leading to an increased public awareness of environmental issues and human health risks in China. As part of a pilot study, 12-hr integrated fine fraction particulate matter (PM2.5) filter samples were collected to chemically characterize and investigate the sources of ambient particulate matter in Guiyang City, Guizhou Province, southwestern China. Results showed that the 12-hr integrated PM2.5 concentrations exhibited a daytime average of 51 ± 22μg·m-3 (mean ± standard deviation) with a range of 17-128μg·m-3 and a nighttime average of 55 ± 32μg·m-33 with a range of 4-186 μg·m-3. The 24-hr integrated PM2.5 concentrations varied from 15 to 157 μg·m-3, with a mean value of 53 ± 25 μg·m-3, which exceeded the 24-hr PM2.5 standard of 35μg·m-3 set by USEPA, but was below the standard of 75μg·m-3, set by China Ministry of Environmental Protection. Energy-dispersive X-ray fluorescence spectrometry (XRF) was applied to determine PM2.5 chemical element concentrations. The order of concentrations of heavy metals in PM2.5 were iron (Fe) > zinc (Zn) > manganese (Mn) > lead (Pb) > arsenic (As) > chromium (Cr). The total concentration of 18 chemical elements was 13 ± 2 μg·m-3, accounting for 25% in PM2.5, which is comparable to other major cities in China, but much higher than cities outside of China.

In vitro toxicoproteomic analysis of A549 human lung epithelial cells exposed to urban air particulate matter and its water-soluble and insoluble fractions

Background

Toxicity of airborne particulate matter (PM) is difficult to assess because PM composition is complex and variable due to source contribution and atmospheric transformation. In this study, we used an in vitro toxicoproteomic approach to identify the toxicity mechanisms associated with different subfractions of Ottawa urban dust (EHC-93).

Methods

A549 human lung epithelial cells were exposed to 0, 60, 140 and 200 μg/cm² doses of EHC-93 (total), its insoluble and soluble fractions for 24 h. Multiple cytotoxicity assays and proteomic analyses were used to assess particle toxicity in the exposed cells.

Results

The cytotoxicity data based on cellular ATP, BrdU incorporation and LDH leakage indicated that the insoluble, but not the soluble, fraction is responsible for the toxicity of EHC-93 in A549 cells. Two-dimensional gel electrophoresis results revealed that the expressions of 206 protein spots were significantly altered after particle exposures, where 154 were identified by MALDI-TOF-TOF-MS/MS. The results from cytotoxicity assays and proteomic analyses converged to a similar finding that the effects of the total and insoluble fraction may be alike, but their effects were distinguishable, and their effects were significantly different from the soluble fraction. Furthermore, the toxic potency of EHC-93 total is not equal to the sum of its insoluble and soluble fractions, implying inter-component interactions between insoluble and soluble materials resulting in synergistic or antagonistic cytotoxic effects. Pathway analysis based on the low toxicity dose (60 μg/cm²) indicated that the two subfractions can alter the expression of those proteins involved in pathways including cell death, cell proliferation and inflammatory response in a distinguishable manner. For example, the insoluble and soluble fractions differentially affected the secretion of pro-inflammatory cytokines such as MCP-1 and IL-8 and distinctly altered the expression of those proteins (e.g., TREM1, PDIA3 and ENO1) involved in an inflammatory response pathway in A549 cells.

Conclusions

This study demonstrated the impact of different fractions of urban air particles constituted of various chemical species on different mechanistic pathways and thus on cytotoxicity effects. In vitro toxicoproteomics can be a valuable tool in mapping these differences in air pollutant exposure-related toxicity mechanisms.

Electronic supplementary material

The online version of this article (10.1186/s12989-017-0220-6) contains supplementary material, which is available to authorized users.

Seasonal variation of particle-induced oxidative potential of airborne particulate matter in Beijing

An in vitro plasmid scission assay (PSA), the cell apoptosis assay, and ICP-MS were employed to study the oxidative potentials and trace element compositions of the airborne particulate matter (PM) in Beijing during a one year-long field campaign from June 2010 to June 2011. The cell damages induced by PM reveled by the cell apoptosis assay showed a similar variation pattern to the DNA damages obtained by PSA, verifying the feasibility of the PSA in analyzing the oxidative capacity of PM samples. The PSA experiments showed that the particle-induced DNA damage was highest in summer, followed by spring, winter and autumn in descending order. The percentages of the oxidative damages to plasmid DNA induced by the water-soluble fractions of PM under the particle doses from 10 to 250μg/ml were generally lower than 45%, with some values peaking at above 50%. The peak values were frequently present in late spring (i.e. April and May) and early summer (i.e. June) but they were scarcely observed in other seasons. These peak values were mostly associated with haze days or the days with low wind speed (less than 4m/s), indicating that the PM samples during haze had higher oxidative potential than those during non-haze periods. The oxidative potential induced by the water-soluble fraction of the PM displayed a significant positive correlation with the concentrations of the water-soluble elements Cd, Cs, Pb, Rb, Zn, Be and Bi, demonstrating that the particle-induced oxidative potentials were mainly sourced from these elements. The exposure risk represented by the mass concentration of these elements in unit volume of atmosphere was higher in summer and winter, and lower in autumn and spring. The haze day PM samples not only had higher level of oxidative potentials but also had higher concentrations of water-soluble elements.

Use of simulated epithelial lung fluid in assessing the human health risk of Pb in urban street dust

In many urban contexts, non-dietary Pb exposure from street dusts may add to the overall exposure burden, and the presence of high total Pb content is well documented in urban street dust from across the globe. Given the increasing recognition of the potential adverse health effects from both the quantity and the chemical and physical composition of the inhaled fraction, and the recognition that it is the soluble fraction rather than the total element content that has more direct links to health effects, attention has focused in this study on the human health risks via this exposure pathway. In order to investigate the environmental exposure to Pb from the inhalation of urban street dusts, a newly developed in vitro simulated epithelium lung fluid (SELF) has been applied to the <10μm fraction of urban street dusts. In this context, 21 urban street dust samples, across five UK cities, were selected based on their high pseudo-total Pb content. The work revealed that inhalation bioaccessibility, and hence inhalation dose, varied across the cities but was generally found to be low (<10%). Indeed, the lung bioaccessibility was far lower (% lung bioaccessibility ranged from 1.2 to 8.8) than is currently applied in two of the most commonly employed risk assessment models i.e. the Integrated Exposure Uptake Biokinetic model (IEUBK, USA) and the Contaminated Land Exposure Assessment model (CLEA, UK). The estimated inhalation dose (for adults) calculated from the PM10 bioaccessibility ranged from 7ngkg^-1_BWday^-1 (Edinburgh) to 1.3ngkg^-1_BWday^-1 (Liverpool). The results indicate a low potential inhalation bioaccessibility for Pb in these urban street dust samples when modelled using the neutral pH conditions of the SELF.

In Vitro Investigations of Human Bioaccessibility from Reference Materials Using Simulated Lung Fluids

An investigation for assessing pulmonary bioaccessibility of metals from reference materials is presented using simulated lung fluids. The objective of this paper was to contribute to an enhanced understanding of airborne particulate matter and its toxic potential following inhalation. A large set of metallic elements (Ba, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sr, and Zn) was investigated using three lung fluids (phosphate-buffered saline, Gamble's solution and artificial lysosomal fluid) on three standard reference materials representing different types of particle sources. Composition of the leaching solution and four solid-to-liquid (S/L) ratios were tested. The results showed that bioaccessibility was speciation- (i.e., distribution) and element-dependent, with percentages varying from 0.04% for Pb to 86.0% for Cd. The higher extraction of metallic elements was obtained with the artificial lysosomal fluid, in which a relative stability of bioaccessibility was observed in a large range of S/L ratios from 1/1000 to 1/10,000. For further investigations, it is suggested that this method be used to assess lung bioaccessibility of metals from smelter-impacted dusts.

A critical review of approaches and limitations of inhalation bioavailability and bioaccessibility of metal(loid)s from ambient particulate matter or dust

Inhalation of metal(loid)s in ambient particulate matter (APM) represents a significant exposure pathway to humans. Although exposure assessment associated with this pathway is currently based on total metal(loid) content, a bioavailability (i.e. absorption in the systemic circulation) and/or bioaccessibility (i.e. solubility in simulated lung fluid) based approach may more accurately quantify exposure. Metal(loid) bioavailability-bioaccessibility assessment from APM is inherently complex and lacks consensus. This paper reviews the discrepancies that impede the adoption of a universal protocol for the assessment of inhalation bioaccessibility. Exposure assessment approaches for in-vivo bioavailability, in-vitro cell culture and in-vitro bioaccessibility (composition of simulated lungs fluid, physico-chemical and methodological considerations) are critiqued in the context of inhalation exposure refinement. An important limitation of bioavailability and bioaccessibility studies is the use of considerably higher than environmental metal(loid) concentration, which diminishing their relevance to human exposure scenarios. Similarly, individual metal(loid) studies have been criticised due to complexities of APM metal(loid) mixtures which may impart synergistic or antagonistic effects compared to single metal(loid) exposure. Although a number of different simulated lung fluid (SLF) compositions have been used in metal(loid) bioaccessibility studies, information regarding the comparative leaching efficiency among these different SLF and comparisons to in-vivo bioavailability data is lacking. In addition, the particle size utilised is often not representative of what is deposited in the lungs while assay parameters (extraction time, solid to liquid ratio, temperature and agitation) are often not biologically relevant. Research needs are identified in order to develop robust in-vitro bioaccessibility protocols for the assessment or prediction of metal(loid) bioavailability in APM for the refinement of inhalation exposure.

Oxidative stress and endocytosis are involved in upregulation of interleukin-8 expression in airway cells exposed to PM2.5

Inhaled PM2.5 (particulate matter with an aerodynamic diameter of 2.5 μm or less) can induce lung inflammation through released inflammatory mediators from airway cells, such as interleukin-8 (IL-8) and tumor necrosis factor alpha (TNF-α). However, the mechanisms underlying PM2.5-induced IL-8 gene expression have not been fully characterized. BEAS-2B cells (a human bronchial epithelial cell line) and THP-1 cells (a human macrophage-like cell line) were used as the in vitro models to investigate the underlying mechanism in this study. IL-8 expression was increased in the cells treated with PM2.5 in a dose-dependent manner. The water-soluble and insoluble fractions of PM2.5 suspension were both shown to induce IL-8 expression. PM2.5 exposure could obviously induce ROS (reactive oxygen species) generation, indicative of oxidative stress. Pretreatment with the antioxidant N-acetyl-l-cysteine (NAC) potently inhibited PM2.5-induced IL-8 expression. Employment of the transition metal chelators including TPEN (N,N,N',N'-tetrakis (2-pyridylmethyl) ethylenediamine) or DFO (desferrioxamine) inhibited IL-8 expression induced by PM2.5 by over 20% in BEAS-2B cells, but had minimal effect in THP-1 cells. Pretreatment with the endocytosis inhibitor CytD markedly blocked IL-8 expression induced by PM2.5 in both BEAS-2B and THP-1 cells. In summary, exposure to PM2.5 induced IL-8 gene expression through oxidative stress induction and endocytosis in airway cells. © 2015 Wiley Periodicals, Inc. Environ Toxicol 31: 1869-1878, 2016.

Role of metals in free radical generation and genotoxicity induced by airborne particulate matter (PM2.5) from Pune (India)

In the present study, metal-facilitated free radical generation in particulate matter (PM) and its association with deoxyribonucleic acid (DNA) damage were studied. The examined data showed that the concentration of fine PM in Pune exhibited seasonal variations. Inductively coupled plasma-atomic emission spectrometry (ICP-AES) was used to examine the metal composition, which showed the presence of metals such as Cu, Zn, Mn, Fe, Co, Cr, Pb, Cd, and Ni. Fe metal was present in the highest concentrations in both the seasons, followed by Zn. The scanning electron microscopy-energy-dispersive spectrometer (SEM-EDS) results also demonstrated that the fine PM particles deposited in summer samples were less than those of winter samples, suggesting that the PM load in winter was higher as compared to that in summer. Elemental mapping of these particles substantiates deposition of metals as Fe, Zn, etc. on particles. The electron paramagnetic species (EPR) technique was utilized for free radical detection, and plasmid DNA assay was utilized to study the genotoxicity of ambient fine PM. Obtained g values show the presence of radicals in PM samples of Pune. PM contains the C-centered radical with a vicinal oxygen atom (g = 2.003). In addition to this, the g value for Fe was also observed. Therefore, we intend that the radicals related with fine PM comprise metal-mediated radicals and produce DNA damage. The plasmid DNA assay results indicated that the TM₅₀ values (toxic mass of PM causing 50 % of plasmid DNA damage) of PM exhibited seasonal variations with higher TM₅₀ values for summer and lower TM₅₀ values during winter.

Contrasting biological potency of particulate matter collected at sites impacted by distinct industrial sources

BACKGROUND

Industrial sources contribute a significant proportion of anthropogenic particulate matter (PM) emissions, producing particles of varying composition that may differentially impact health. This study investigated the in vitro toxicity of ambient PM collected near industrial sites in relation to particle size and composition.

METHODS

Size-fractionated particles (ultrafine, PM_0.1-2.5, PM_2.5-10, PM_>10) were collected in the vicinity of steel, copper, aluminium, and petrochemical industrial sites. Human lung epithelial-like A549 and murine macrophage-like J774A.1 cells were exposed for 24 h to particle suspensions (0, 30, 100, 300 μg/cm²). Particle potency was assessed using cytotoxic (resazurin reduction, lactate dehydrogenase (LDH) release) and inflammatory (cytokine release) assays, and regressed against composition (metals, polycyclic aromatic hydrocarbons (PAHs), endotoxin).

RESULTS

Coarse (PM_2.5-10, PM_>10) particle fractions were composed primarily of iron and aluminium; in contrast, ultrafine and fine (PM_0.1-2.5) fractions displayed considerable variability in metal composition (especially water-soluble metals) across collection sites consistent with source contributions. Semi-volatile and PM-associated PAHs were enriched in the fine and coarse fractions collected near metal industry. Cell responses to exposure at equivalent mass concentrations displayed striking differences among sites (SITE x SIZE and SITE x DOSE interactions, p < 0.05), suggesting that particle composition, in addition to size, impacted particle toxicity. While both J774A.1 and A549 cells exhibited clear particle size-dependent effects, site-dependent differences were more pronounced in J774A.1 cells, suggesting greater sensitivity to particle composition. Plotting particle potency according to cytotoxic and inflammatory response grouped particles by size and site, and showed that particles of similar composition tended to cluster together. Cytotoxic effects in J774A.1 cells correlated with metal and PAH content, while inflammatory responses were associated primarily with endotoxin content in coarse particles.

CONCLUSIONS

Industrial sources produce particulate emissions with varying chemical composition that differ in their in vitro potency in relation to particle size and the levels of specific constituents.

Exposure to concentrated ambient fine particulate matter disrupts vascular endothelial cell barrier function via the IL-6/HIF-1α signaling pathway

Exposure to concentrated ambient fine particulate matter (PM2.5) has been associated with cardiovascular diseases (CVDs). The barrier function of vascular endothelial cells is critical for the development of CVDs. Here, we employed human umbilical vein endothelial cells to clarify the function of ambient PM2.5 pollution in the regulation of membrane permeability of vascular endothelial cells. The results show that a high concentration of PM2.5, which mainly includes heavy metals and polycyclic aromatic hydrocarbons, induces barrier dysfunction of vascular endothelial cells. This was mediated in part by promoting IL‐6 expression, which then increases the transcriptional activity of HIF‐1α by promoting its translocation to the nucleus. Our findings indicate that concentrated PM2.5 can destroy membrane integrity and promote permeability in vascular endothelial cells, thereby contributing to the development of CVDs.

Developing a Gene Biomarker at the Tipping Point of Adaptive and Adverse Responses in Human Bronchial Epithelial Cells

Determining mechanism-based biomarkers that distinguish adaptive and adverse cellular processes is critical to understanding the health effects of environmental exposures. Shifting from in vivo, low-throughput toxicity studies to high-throughput screening (HTS) paradigms and risk assessment based on in vitro and in silico testing requires utilizing toxicity pathway information to distinguish adverse outcomes from recoverable adaptive events. Little work has focused on oxidative stresses in human airway for the purposes of predicting adverse responses. We hypothesize that early gene expression-mediated molecular changes could be used to delineate adaptive and adverse responses to environmentally-based perturbations. Here, we examined cellular responses of the tracheobronchial airway to zinc (Zn) exposure, a model oxidant. Airway derived BEAS-2B cells exposed to 2–10 μM Zn²⁺ elicited concentration- and time-dependent cytotoxicity. Normal, adaptive, and cytotoxic Zn²⁺ exposure conditions were determined with traditional apical endpoints, and differences in global gene expression around the tipping point of the responses were used to delineate underlying molecular mechanisms. Bioinformatic analyses of differentially expressed genes indicate early enrichment of stress signaling pathways, including those mediated by the transcription factors p53 and NRF2. After 4 h, 154 genes were differentially expressed (p < 0.01) between the adaptive and cytotoxic Zn²⁺ concentrations. Nearly 40% of the biomarker genes were related to the p53 signaling pathway with 30 genes identified as likely direct targets using a database of p53 ChIP-seq studies. Despite similar p53 activation profiles, these data revealed widespread dampening of p53 and NRF2-related genes as early as 4 h after exposure at higher, unrecoverable Zn²⁺ exposures. Thus, in our model early increased activation of stress response pathways indicated a recoverable adaptive event. Overall, this study highlights the importance of characterizing molecular mechanisms around the tipping point of adverse responses to better inform HTS paradigms.

Combined toxicity of heavy metal mixtures in liver cells

With rapid industrialization, China is now facing great challenges in heavy metal contamination in the environment. Human exposure to heavy metals through air, water and food commonly involves a mixture consisting of multiple heavy metals. In this study, eight common heavy metals (Pb, Cd, Hg, Cu, Zn, Mn, Cr, Ni) that cause environmental contamination were selected to investigate the combined toxicity of different heavy metal mixtures in HL7702 cells. Toxicity (24 h LC50 ) of each individual metal on the cells ranked Hg > Cr = Cd > Cu > Zn > Ni > Mn > Pb; toxicity of the different mixtures ranked: M5 > M3PbHgCd > M5+Mn > M5+Cu > M2CdNi > M4A > M8-Mn > M8 > M5+Zn > M4B > M8-Cr > M8-Zn > M8-Cu > M8-Pb > M8-Cd > M8-Hg > M8-Ni > M3PbHgNi > M3CuZnMn. The cytotoxicity data of individual metals were successfully used to build the additive models of two- to eight-component metal mixtures. The comparison between additive model and combination model or partly additive model was useful to evaluate the combined effects in mixture. Synergistic, antagonistic or additive effects of the toxicity were observed in different mixtures. These results suggest that the combined effects should be considered in the risk assessment of heavy metal co-exposure, and more comprehensive investigations on the combined effects of different heavy metal mixtures are needed in the future. Copyright © 2016 John Wiley & Sons, Ltd.

The suitability of extraction solutions to assess bioaccessible trace metal fractions in airborne particulate matter: a comparison of common leaching agents

The determination of bioaccessible metal concentrations and/or fractions is a prerequisite for reliable assessment of the hazardous potential of toxic trace metals present in airborne particulate matter (APM). For this purpose, the use of various leaching agents has been reported in literature. The applied reagents reveal severe differences in composition. Therefore, variations in the amounts of trace metals released from APM samples could be expected with the use of these agents, hampering comparison of literature data. In this work, bioaccessible metal fractions were determined in PM10 samples from Graz, Austria, and Karachi, Pakistan, using synthetic gastric juice (SGJ), artificial lysosomal fluid (ALF), Gamble's solution, aqueous solutions of sodium chloride, ammonium acetate, ammonium citrate, and water for sample extraction. Investigated trace metals showed distinct differences in extractable fractions for the same extractant. For example, bioaccessible contents ranged from 34.8 ± 13.3% for Ni (n = 12) to 77.9 ± 14.8% for Cd (n = 12) when SGJ was used for extraction. Furthermore, extraction yields for the applied leaching agents were determined, indicating for all investigated elements two to four times more efficient extraction with SGJ, ammonium citrate buffer, and ALF as compared to water and simple inorganic salt solutions, indicating that ammonium citrate buffer could be used as an alternative for synthetic body fluids with rather complex composition.

Zinc oxide nanoparticles induce eosinophilic airway inflammation in mice

Zinc oxide nanoparticles (ZnO NPs) have been widely used in industry. The metal composition of PM2.5 might contribute to the higher prevalence of asthma. To investigate the effects of ZnO NPs on allergic airway inflammation, mice were first exposed to different concentrations of ZnO NPs (0.1 mg/kg, 0.5 mg/kg) or to a combination of ZnO NPs and chicken egg ovalbumin (OVA) by oropharyngeal aspiration on day 0 and day 7 and then were sacrificed 5 days later. The subsequent time course of airway inflammation in the mice after ZnO NPs exposure was evaluated on days 1, 7, and 14. To further determine the role of zinc ions, ZnCl2 was also administered. The inflammatory cell count, cytokine levels in the bronchoalveolar lavage fluid (BALF), and lung histopathology were examined. We found significant neutrophilia after exposure to high-dose ZnO NPs on day 1 and significant eosinophilia in the BALF at 7 days. However, the expression levels of the T helper 2 (Th2) cytokines IL-4, IL-5, and IL-13 increased significantly after 24h of exposure to only ZnO NPs and then decreased gradually. These results suggested that ZnO NPs could cause eosinophilic airway inflammation in the absence of allergens.

Fine particulate matter in acute exacerbation of COPD

Chronic obstructive pulmonary disease (COPD) is a common airway disorder. In particular, acute exacerbations of COPD (AECOPD) can significantly reduce pulmonary function. The majority of AECOPD episodes are attributed to infections, although environmental stress also plays a role. Increasing urbanization and associated air pollution, especially in developing countries, have been shown to contribute to COPD pathogenesis. Elevated levels of particulate matter (PM) in polluted air are strongly correlated with the onset and development of various respiratory diseases. In this review, we have conducted an extensive literature search of recent studies of the role of PM_2.5 (fine PM) in AECOPD. PM_2.5 leads to AECOPD via inflammation, oxidative stress (OS), immune dysfunction, and altered airway epithelial structure and microbiome. Reducing PM_2.5 levels is a viable approach to lower AECOPD incidence, attenuate COPD progression and decrease the associated healthcare burden.

Study of ⁷Be and ²¹⁰Pb as radiotracers of African intrusions in Malaga (Spain)

The relationship between the particulate matter in the atmosphere of Malaga and the origin of air masses with special attention to African intrusions was analyzed. The concentrations of PM10 and the activities of some radionuclides ((7)Be and (210)Pb) as tracers of these intrusions are discussed. The origin of these radiotracers is completely different. (210)Pb is a good tracer of air masses traveling close to the ground and come from inland areas. On the other hand, the production of (7)Be is very low in the vicinity of the Earth's surface, and increases with altitude, making it a great tracer of stratospheric air masses in the troposphere. Studies of radionuclide activities in aerosol particles provide a means for evaluating the integrated effects of transport and meteorology on the atmospheric loadings of substances with different sources. Measurements of aerosol mass concentration and specific activities of (7)Be and (210)Pb in aerosols at Malaga (36° 43' 40″ N; 4° 28' 8″ W) for the period 2009-2011 were used to obtain the relationships between radionuclide activities and airflow patterns by comparing the data grouped by air mass trajectory. The average concentration values of (7)Be and (210)Pb over the 3-year period have been found to be 5.05 and 0.55 mBq m(-3), respectively, with mean aerosol mass concentration of 53.6 μg m(-3). Taking into account the outbreaks of the daily values limits of PM10 in the study period (2009-2011), the origin of air masses is studied to explain three different situations of both radionuclides (7)Be and (210)Pb: 1) high concentrations of (7)Be and low concentrations of (210)Pb; 2) high concentrations of (210)Pb and low concentrations of (7)Be and 3) high concentrations of (7)Be and (210)Pb.

Bioaccessibility of trace elements in fine and ultrafine atmospheric particles in an industrial environment

The lung bioaccessibility, i.e., the solubility in alveolar lung fluid of metals in particulate matter, has been recognized as an important parameter for health risk assessment, associated with the inhalation of airborne particles. The purpose of this study is to use an in vitro method to estimate the pulmonary bioaccessibility of toxic metals in different particle sizes, from a multi-influenced industrial emission area. The fine and ultrafine particles collected with cascade impactors in the chimneys and at different distances from a Fe-Mn smelter were extracted with a simulated alveolar fluid (Gamble solution). In addition, a four-step sequential extraction procedure was employed to approach the metal speciation. The bioaccessibility of metals ranged from almost insoluble for Fe (<1%) to extremely soluble for Rb (>80%). In terms of particle size, the trace element bioaccessibility is generally higher for the finer size fractions (submicron and ultrafine particles) than for the coarse one (>1 µm). These submicron particles have a very high number concentration and specific surface area, which confer them an important contact surface with the alveolar fluid, i.e., a higher bioaccessibility. Interestingly, the bioaccessibility of most metals clearly increases between the chimney stacks and the close environment of the studied Fe-Mn smelter, over a very short distance (800 m), possibly due to a mix with surrounding steelworks emissions. This increase is not observed over a greater distance from the smelter (2000 m), when industrial particles were mixed with urban aerosols, except for Fe, under more soluble forms in combustion particles.

Zinc compound air releases from Toxics Release Inventory facilities and cardiovascular disease mortality rates

BACKGROUND

Inhaled zinc has been found in association with cardiopulmonary toxicity. However, limited human epidemiologic studies are available. This study analyzed the association between covariate-adjusted cardiovascular (CVD) mortality rates and zinc compound air releases in the United States.

METHODS

We conducted an ecological analysis on the association between zinc compound air releases for 1991-2000 using the Toxics Release Inventory database and average age-adjusted CVD mortality for 2006-2010, adjusting for race/ethnicity composition and several health and socioeconomic factors. Models were estimated for males and females and for metropolitan and nonmetropolitan counties.

RESULTS

Zinc compound air releases were positively associated with increased adjusted CVD mortality rates in all four models (β=0.0085, p<0.0001 for males in nonmetropolitan counties; β=0.0093, p<0.0001 for males in metropolitan counties; β=0.0145, p<0.0001 for females in nonmetropolitan counties; and β=0.0098, p<0.0001 for females in metropolitan counties). Results were largely robust to various sensitivity analyses.

CONCLUSION

This study provides epidemiological evidence for possible CVD health impacts of inhaled zinc in the United States. Although the strongest effect was found for females in nonmetropolitan counties, the associations were consistent in nonmetropolitan or metropolitan counties for both genders.

PM10 mass concentration and oxidative capacity of moxa smoke

BACKGROUND

The burning of moxa floss in moxibustion releases moxa smoke containing a substantial amount of particulate matter (PM10) into the environment, which has generated safety concerns about its potential health impact.

DESIGN

Plasmid scission assay was performed using PM10 collected from moxibustion clinics.

METHODS

PM10 was collected in winter 2012 by burning three types of moxa floss samples in moxibustion simulation clinics, and the resulting PM10 mass concentration was calculated. Oxidative capacity of the PM10 samples was measured by plasmid scission assay and the percentage of DNA damage at dosage 500 µg ml(-1) (D500) was calculated by linear regression analysis.

RESULTS

The average PM10 mass concentration of samples A (3 years and 3:1 ratio), B (3 years and 8:1 ratio) and C (10 years and 3:1 ratio) was 273.33, 172.22 and 168.89 μg/m(3), respectively. The D500 oxidative capacity of PM10 was on average 24.25%, 27.83% and 28.07% for samples A, B and C, respectively. No significant difference was found in the PM10-induced oxidative damage by moxa smoke produced from the three types of moxa floss.

CONCLUSIONS

PM10 mass concentrations from the three types of moxa floss combustion exceeded internationally recommended levels. Despite so, PM10 mass concentration of moxa smoke was much lower than biomass and coal combustion and similar to that of gas combustion. The oxidative DNA damage induced by individual PM10 in moxibustion environment was lower than that reported in other environments, indicating that moxibustion-derived PM10 might not be as injurious to human health as generally assumed.

Cytotoxic and inflammatory potential of size-fractionated particulate matter collected repeatedly within a small urban area

Background

Exposure to coarse, fine, and ultrafine particles is associated with adverse population health impacts. We investigated whether size-fractionated particles collected repeatedly in the vicinity of industrial (steel mills and associated coking operations, wastewater treatment), high traffic, and residential areas display systematic differences in biological potency.

Methods

Particulate matter (PM_<0.1, PM_0.1–0.5, PM_0.5–2.5, PM_2.5–10, PM_>10) samples collected at sites within Windsor, Ontario, were screened for biological potency in human A549 lung epithelial and murine J774A.1 macrophage-like cells using cytotoxicity bioassays (cellular ATP, resazurin reduction, lactate dehydrogenase (LDH) release), cytokine production, and transcript profiles. Potency was determined from the slope of each dose-effect relationship.

Results

Cytotoxic potency varied across size fractions and within a fraction across sites and sampling periods, suggesting that particle composition, in addition to size and mass, affected particle toxicity. While ATP and LDH profiles showed some similarity, resazurin reduction (a measure of metabolic activity) exhibited a unique pattern of response, indicating that the cytotoxicity assays were sensitive to distinct particle characteristics. Chemical speciation varied in relation to prevailing winds, consistent with enrichment of source emissions (e.g. higher metal and polycyclic aromatic hydrocarbon content downwind of the industrial site). Notwithstanding this variability, site-dependent differences in particle toxicity were evident, including greater potency of coarse fractions at the industrial site and of ultrafine particles at the traffic site (Site × Size interactions, p < 0.05). Regression of potency against particle constituents revealed correlations between resazurin reduction, induction of metal-responsive genes, and metal content, which were particularly strong for the coarse fraction, and between cytokine release and endotoxin, suggesting that these factors were important drivers of biological effects that explain, at least in part, the contrasting potencies of particles compared on an equivalent mass basis.

Conclusions

The data show that 1) particle potency and composition can exhibit significant temporal variation in relation to source contributions; 2) sources may differentially impact the potency of specific size fractions; and 3) particle constituents, notably metals and endotoxin, may elicit distinct biological responses. Together, the data are consistent with the notion that sources and composition, in addition to size and mass concentration, are relevant to particle toxicity.

Electronic supplementary material

The online version of this article (doi:10.1186/s12989-015-0099-z) contains supplementary material, which is available to authorized users.

Effect of fuel zinc content on toxicological responses of particulate matter from pellet combustion in vitro

Significant amounts of transition metals such as zinc, cadmium and copper can become enriched in the fine particle fraction during biomass combustion with Zn being one of the most abundant transition metals in wood combustion. These metals may have an important role in the toxicological properties of particulate matter (PM). Indeed, many epidemiological studies have found associations between mortality and PM Zn content. The role of Zn toxicity on combustion PM was investigated. Pellets enriched with 170, 480 and 2300 mg Zn/kg of fuel were manufactured. Emission samples were generated using a pellet boiler and the four types of PM samples; native, Zn-low, Zn-medium and Zn-high were collected with an impactor from diluted flue gas. The RAW 264.7 macrophage cell line was exposed for 24h to different doses (15, 50,150 and 300 μg ml(-1)) of the emission samples to investigate their ability to cause cytotoxicity, to generate reactive oxygen species (ROS), to altering the cell cycle and to trigger genotoxicity as well as to promote inflammation. Zn enriched pellets combusted in a pellet boiler produced emission PM containing ZnO. Even the Zn-low sample caused extensive cell cycle arrest and there was massive cell death of RAW 264.7 macrophages at the two highest PM doses. Moreover, only the Zn-enriched emission samples induced a dose dependent ROS response in the exposed cells. Inflammatory responses were at a low level but macrophage inflammatory protein 2 reached a statistically significant level after exposure of RAW 264.7 macrophages to ZnO containing emission particles. ZnO content of the samples was associated with significant toxicity in almost all measured endpoints. Thus, ZnO may be a key component producing toxicological responses in the PM emissions from efficient wood combustion. Zn as well as the other transition metals, may contribute a significant amount to the ROS responses evoked by ambient PM.

Respiratory and cardiovascular effects of metals in ambient particulate matter: a critical review

In this review, we critically evaluated the epidemiological and toxicological evidence for the role of specific transition metals (As. Cr. Cu. Fe. Mn. Ni. Sc. Ti. V and Zn) in causing or contributing to the respiratory and cardiovascular health effects associated with ambient PM. Although the epidemiologic studies arc suggestive. and both the in vivo and in vitro laboratory studies document the toxicity of specific metals (Fe. Ni. V and Zn). the overall weight of evidence does not convincingly implicate metals as major contributors to health effects. None of the epidemiology studies that we reviewed conclusively implicated specific transition metals as having caused the respiratory and cardiovascular effects associated with ambient levels of PM. However, the studies reviewed tended to be internal ly consistent in identifying some metals (Fe, Ni, V and Zn) more frequently than others (As, Cu, Mn and Sc) as having positive associations wi th health effects. The major problem wi th which the epidemiological studies were faced was classifying and quantifying exposure. Community and population exposures to metals or other components of ambient PM were inferred from centrally- located samplers that may not accurately represent individual level exposures. Only a few authors reported findings that did not support the stated premise of the study; indeed, statistic ally significant associations are not necessarily biologically significant. It is likely that ·'negative studies" are under-represented in the published literature, making it a challenge to achieve a balanced evaluation of the role of metals in causing health effects associated with ambient PM. Both the in vivo and in vitro study results demonstrated that individual metals (Cu. Fe. Ni. V and Zn) and extracts of metals from ambient PM sources can produce acute inflammatory responses. However. the doses administered to laboratory animals were many orders of magnitude greater than what humans experience from breathing ambient air. The studies that used intratracheal instillation have the advantage of delivering a known dose to a specific anatomical location. but arc not analogous to an inhaled dose that is distributed over the surface area of the respiratory tract. Studies. in which laboratory animals or human volunteers inhaled CAPs best represent exposures to the general human population. The in vivo and in vitro studies reviewed provide indications that the probable mechanisms involved in the respiratory and cardiac effects from high metal exposures include: an inflammatory response mediated by formation of ROS, upregulation of genes coding for inflammatory cytokines, altered expression of genes involved in cell signaling pathways and maintenance of metals homeostasis.The fact that doses of metals many orders of magnitude greater than those existing in ambient air were required to produce measurable adverse effects in animals makes it doubtful that metals play any major role in respiratory and cardiovascular effects produced from human exposure to ambient PM. We suggest that future research priorities should focus on testing at more environmentally relevant exposure levels and that any new toxicological studies be written to include dosages in units that can be easily compared to human exposure levels.

Role of H2O2 in the oxidative effects of zinc exposure in human airway epithelial cells

Human exposure to particulate matter (PM) is a global environmental health concern. Zinc (Zn²⁺) is a ubiquitous respiratory toxicant that has been associated with PM health effects. However, the molecular mechanism of Zn²⁺ toxicity is not fully understood. H₂O₂ and Zn²⁺ have been shown to mediate signaling leading to adverse cellular responses in the lung and we have previously demonstrated Zn²⁺ to cause cellular H₂O₂ production. To determine the role of Zn²⁺-induced H₂O₂ production in the human airway epithelial cell response to Zn²⁺ exposure. BEAS-2B cells expressing the redox-sensitive fluorogenic sensors HyPer (H₂O₂) or roGFP2 (E_GSH) in the cytosol or mitochondria were exposed to 50 µM Zn²⁺ for 5 min in the presence of 1 µM of the zinc ionophore pyrithione. Intracellular H₂O₂ levels were modulated using catalase expression either targeted to the cytosol or ectopically to the mitochondria. HO-1 mRNA expression was measured as a downstream marker of response to oxidative stress induced by Zn²⁺ exposure. Both cytosolic catalase overexpression and ectopic catalase expression in mitochondria were effective in ablating Zn²⁺-induced elevations in H₂O₂. Compartment-directed catalase expression blunted Zn²⁺-induced elevations in cytosolic E_GSH and the increased expression of HO-1 mRNA levels. Zn²⁺ leads to multiple oxidative effects that are exerted through H₂O₂-dependent and independent mechanisms.

•

We used targeted catalase expression to examine the role of H₂O₂ in Zn²⁺-induced effects.

•

Cytosolic or mitochondrial catalase ablated Zn²⁺-induced mitochondrial H₂O₂ production.

•

Catalase expression blunted Zn²⁺-induced cytosolic E_GSH and HO-1 mRNA.

•

Independently, decreasing GSH_total or increasing E_GSH failed to induce HO-1 mRNA.

•

Zn²⁺ causes multiple oxidative effects by H₂O₂-dependent and independent mechanisms.

Development and application of an inhalation bioaccessibility method (IBM) for lead in the PM10 size fraction of soil

An approach for assessing the inhalation bioaccessibility of Pb in the PM10 size fraction is presented, using an in vitro simulated epithelial lung fluid to represent the extracellular environment of the lung. The developed inhalation bioaccessibility method (IBM) is applied to a range of urban surface soils and mining wastes obtained from Mitrovica, Kosovo, a site where impacts upon human health following exposure to Pb have been internationally publicised. All Pb determinations were undertaken by inductively coupled plasma mass spectrometry (ICP-MS). The pseudo-total concentration of Pb (microwave acid digestion using aqua-regia) varied between matrices: smelter (20,900-72,800mgkg(-1)), topsoil (274-13,700mgkg(-1)), and tailings (2990mgkg(-1)-25,300mgkg(-1)). The in vitro inhalation bioaccessibility was typically several orders of magnitude lower: smelter (7.0-965mgkg(-1)), topsoil (9.8-1060mgkg(-1)), and tailings (0.7mgkg(-1)-49.2mgkg(-1)). The % inhalation bioaccessibility ranged from 0.02 to 11.0%, with the higher inhalation bioaccessible Pb concentrations being observed for samples from the Bosniak Mahalla area of Mitrovica (an area proposed for the relocation of internally displaced peoples). The estimated inhalation dose (for adults) calculated from the PM10 pseudo-total Pb concentration ranged from 0.369 to 1.284μgkg(-1)BWday(-1) (smelter), 0.005-0.242μgkg(-1)BWday(-1) (topsoil), and 0.053-0.446μgkg(-1)BWday(-1) (tailings). When daily inhalation doses were calculated using the bioaccessible Pb concentration the modelled exposure doses were much lower: smelter (0.0001-0.0170μgkg(-1)BWday(-1)), topsoil (0.0002-0.0187μgkg(-1)BWday(-1)) and tailings (0.0001-0.0009μgkg(-1)BWday(-1)). Modelled for the neutral pH conditions of the interstitial lung environment, the results indicate a low potential inhalation bioaccessibility for Pb in these samples. Given the already elevated environmental Pb burden experienced by the local population, where significant prolonged dust or particulate generating activities are taking place, or where the inhaled particles are phagocytized, then inhalation exposure has the potential to significantly add to the overall Pb burden. Such data are important for local policy makers to better enable them to assess risk, especially in areas where soils/dusts have elevated levels of contamination.