Biomedical applications of polymers derived by reversible addition - fragmentation chain-transfer (RAFT)

Stimuli-sensitive polymer prodrug nanocarriers by reversible-deactivation radical polymerization

Polymer prodrugs are based on the covalent linkage of therapeutic molecules to a polymer structure which avoids the problems and limitations commonly encountered with traditional drug-loaded nanocarriers in which drugs are just physically entrapped (e.g., burst release, poor drug loadings). In the past few years, reversible-deactivation radical polymerization (RDRP) techniques have been extensively used to design tailor-made polymer prodrug nanocarriers. This synthesis strategy has received a lot of attention due to the possibility of fine tuning their structural parameters (e.g., polymer nature and macromolecular characteristics, linker nature, physico-chemical properties, functionalization, etc.), to achieve optimized drug delivery and therapeutic efficacy. In particular, adjusting the nature of the drug-polymer linker has enabled the easy synthesis of stimuli-responsive polymer prodrugs for efficient spatiotemporal drug release. In this context, this review article will give an overview of the different stimuli-sensitive polymer prodrug structures designed by RDRP techniques, with a strong focus on the synthesis strategies, the macromolecular architectures and in particular the drug-polymer linker, which governs the drug release kinetics and eventually the therapeutic effect. Their biological evaluations will also be discussed.

Modern Trends in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

Synthesis and biological properties of novel glucose-based fluoro segmented macromolecular architectures

The emergence of novel well-defined biological macromolecular architectures containing fluorine moieties displaying superior functionalities can satisfactorily address many biomedical challenges. In this research, ABA- and AB-type glucose-based biological macromolecules were synthesized using acryl-2,3,4,6-tetra-O-acetyl-D-glucopyranoside with pentafluorophenyl (FPM), pentafluorobenzyl (FBM), phenyl (PM) and benzyl (BM) methacrylate-based macro-RAFT agents following RAFT polymerization. The macro-RAFT agents and the corresponding copolymers were characterized by 19F, 1H, and 13C NMR and FTIR spectroscopic techniques to understand the chemical structure, molecular weight by size-exclusion chromatography, thermal analysis by TGA and DSC. Thermal stability (Td5%) of the FPM and FBM fluoro-based polymers was observed in the range of 219-267 °C, while the non-fluoro PM and BM polymers exhibited in the range of 216-264 °C. Among the macro-RAFT agents, PFPM (107 °C, ΔH: 0.613 J/g) and PPM (103 °C, ΔH: 0.455 J/g) showed higher Tm values, while among the block copolymers, PFBM-b-PG (123 °C, ΔH: 0.412 J/g) and PG-b-PFPM-b-PG (126 °C, ΔH: 0.525 J/g) exhibited higher Tm values. PFBMT and PPM macro-RAFT agents, PPM-b-PG and PG-b-PPM-b-PG copolymer spin-coated films showed the highest hydrophobicity (120°) among the synthesized polymers. The block copolymers exhibited self-assembled segregation by using relatively hydrophobic segments as the core and hydrophilic moieties as the corona. Synthesized biological macromolecules exhibit maximum antibacterial activity towards S. aureus than E. coli bacteria. Fluorophenyl (PFPM) and non-fluorobenzyl-based (PBMT) macro-RAFT agents exhibit low IC50 values, suggesting high cytotoxicity. All the triblock copolymers exhibit lesser cytotoxicity than the di-block polymers.

Injectable biocompatible RAFT mediated nitroxide nanogels: A robust ROS-reduction antioxidant approach

This work introduces novel nitroxide-based nanogels (NGs) crafted through controlled RAFT (Reversible Addition Fragmentation chain Transfer) polymerization, showcasing over 85% improved shelf-life compared to native superoxide dismutase (SOD) enzymes. These 30-40 nm NGs hold great promise for injectable delivery, effectively reducing foam cell formation and displaying potent antioxidant behavior against various reactive oxygen species (ROS), revolutionizing antioxidant therapy. Featuring a meticulously designed core-shell structure via precise RAFT polymerization, these NGs mimic SOD enzymatic activity with nitroxide-based antioxidants, providing unprecedented defense against ROS. Combining methacrylated 2,2,6,6-Tetramethyl-4-piperidyl methacrylate (PMA) and Glycidyl methacrylate (GMA) monomers with precisely synthesized nitroxyl radicals results in exceptional properties. Validated through comprehensive analytical methods, these NGs exhibit remarkable stability, halting foam cell formation even at high concentrations, and demonstrate notable biocompatibility. Their ability to protect low density lipoprotein (LDL) from oxidation for up to a month positions them at the forefront of combating cardiovascular diseases, especially atherosclerosis. This study pioneers injectable antioxidant therapy, offering an innovative approach to cardiovascular ailments. Targeting narrow plaques signifies a promising intervention, reshaping cardiovascular disease treatments. It highlights the potential of advanced drug delivery in biomedicine, promising more effective cardiovascular disease treatments.

HER2 aptamer-conjugated iron oxide nanoparticles with PDMAEMA-b-PMPC coating for breast cancer cell identification

Aim: To synthesize HER2 aptamer-conjugated iron oxide nanoparticles with a coating of poly(2-(dimethylamino) ethyl methacrylate)-poly(2-methacryloyloxyethylphosphorylcholine) block copolymer (IONPPPs). Methods: Characterization covered molecular structure, chemical composition, thermal stability, magnetic characteristics, aptamer interaction, crystalline nature and microscopic features. Subsequent investigations focused on IONPPPs for in vitro cancer cell identification. Results: Results demonstrated high biocompatibility of the diblock copolymer with no significant toxicity up to 150 μg/ml. The facile coating process yielded the IONPP complex, featuring a 13.27 nm metal core and a 3.10 nm polymer coating. Functionalized with a HER2-targeting DNA aptamer, IONPPP enhanced recognition in HER2-amplified SKBR3 cells via magnetization separation. Conclusion: These findings underscore IONPPP's potential in cancer research and clinical applications, showcasing diagnostic efficacy and HER2 protein targeting in a proof-of-concept approach.

Elucidating the Role of Optical Activity of Polymers in Protein-Polymer Interactions

Proteins are biomolecules with potential applications in agriculture, food sciences, pharmaceutics, biotechnology, and drug delivery. Interactions of hydrophilic and biocompatible polymers with proteins may impart proteolytic stability, improving the therapeutic effects of biomolecules and also acting as excipients for the prolonged storage of proteins under harsh conditions. The interactions of hydrophilic and stealth polymers such as poly(ethylene glycol), poly(trehalose), and zwitterionic polymers with various proteins are well studied. This study evaluates the molecular interactions of hydrophilic and optically active poly(vitamin B5 analogous methacrylamide) (poly(B5AMA)) with model proteins by fluorescence spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and circular dichroism (CD) spectroscopy analysis. The optically active hydrophilic polymers prepared using chiral monomers of R-(+)- and S-(-)-B5AMA by the photo-iniferter reversible addition fragmentation chain transfer (RAFT) polymerization showed concentration-dependent weak interactions of the polymers with bovine serum albumin and lysozyme proteins. Poly(B5AMA) also exhibited a concentration-dependent protein stabilizing effect at elevated temperatures, and no effect of the stereoisomers of polymers on protein thermal stability was observed. NMR analysis, however, showed poly(B5AMA) stereoisomer-dependent changes in the secondary structure of proteins.

Living Alternating Ring-Opening Metathesis Copolymerization of 2,3-Dihydrofuran to Provide Completely Degradable Polymers

2,3-Dihydrofuran (DHF) has recently been gaining significant attention as a comonomer in metathesis polymerization, thanks to its ability to provide the resultant polymer backbones with stimuli-responsive degradability. In this report, we present living alternating copolymerization of DHF with less reactive endo-tricyclo[4.2.2.02,5 ]deca-3,9-dienes (TDs) and endo-oxonorbornenes (oxoNBs). By carefully controlling the reactivity of both the Ru initiators and the monomers, we have achieved outstanding A, B-alternation (up to 98 %) under near stoichiometric DHF loading conditions. Notably, we have also found that the use of a more sterically hindered Ru initiator helps to attain polymer backbones with higher DHF incorporation and superior A, B-alternation. While preserving the living characteristics of DHF copolymerization, as evidenced by controlled molecular weights (up to 73.9 kDa), narrow dispersities (down to 1.05), and block copolymer formation, our DHF copolymers could be broken down to a single repeat unit level under acidic conditions. 1 H NMR analysis of the model copolymer revealed that after 24 hours of degradation, up to 80 % of the initial polymer was transformed into a single small molecule product, and after purification, up to 66 % of the degradation product was retrieved. This study provides a versatile approach to improve the alternation and degradability of DHF copolymers.

Site-selected in situ polymerization for living cell surface engineering

The construction of polymer-based mimicry on cell surface to manipulate cell behaviors and functions offers promising prospects in the field of biotechnology and cell therapy. However, precise control of polymer grafting sites is essential to successful implementation of biomimicry and functional modulation, which has been overlooked by most current research. Herein, we report a biological site-selected, in situ controlled radical polymerization platform for living cell surface engineering. The method utilizes metabolic labeling techniques to confine the growth sites of polymers and designs a Fenton-RAFT polymerization technique with cytocompatibility. Polymers grown at different sites (glycans, proteins, lipids) have different membrane retention time and exhibit differential effects on the recognition behaviors of cellular glycans. Of particular importance is the achievement of in situ copolymerization of glycomonomers on the outermost natural glycan sites of cell membrane, building a biomimetic glycocalyx with distinct recognition properties.

Fabrication and characterisation of poly(sulfonated) and poly(sulfonic acid) dissolving microneedles for delivery of antibiotic and antifungal agents

Skin and soft tissue infections (SSTIs) arise from microbial ingress into the skin. In this study, poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (polyAMPS), which has been reported to exhibit antimicrobial properties was synthesised for the manufacture of microarray patches (MAPs). The free acid and sodium salt of polyAMPS with controlled molar masses and narrow dispersity were synthesised via reversible addition - fragmentation chain-transfer (RAFT) polymerisation reaction with a monomer conversion of over 99%, as determined by 1H NMR. The polymers were shown to be biocompatible when evaluated using a fibroblast dermal cell line while agar plating assay using cultures of C. albican demonstrated that the acid form of polyAMPS exhibited antimicrobial inhibition, which is potentiated in the presence of antimicrobial agents. The synthesised polymers were then used to fabricate dissolving MAPs, which were loaded with either ITRA or levofloxacin (LEV). The MAPs displayed acceptable mechanical resistance and punctured ex vivo skin to a depth of 600 µm. Skin deposition studies revealed that the MAPs were able to administer up to ∼ 1.9 mg of LEV (delivery efficiency: 94.7%) and ∼ 0.2 mg of ITRA (delivery efficiency: 45.9%), respectively. Collectively, the synthesis and development of this novel pharmaceutical system may offer a strategy to manage SSTIs.

Prodrug approaches for the development of a long-acting drug delivery systems

Long-acting formulations are designed to reduce dosing frequency and simplify dosing schedules by providing an extended duration of action. One approach to obtain long-acting formulations is to combine long-acting prodrugs (LA-prodrug) with existing or emerging drug delivery technologies (DDS). The design criteria for long-acting prodrugs are distinct from conventional prodrug strategies that alter absorption, distribution, metabolism, and excretion (ADME) parameters. Our review focuses on long-acting prodrug delivery systems (LA-prodrug DDS), which is a subcategory of long-acting formulations where prodrug design enables DDS formulation to achieve an extended duration of action that is greater than the parent drug. Here, we define LA-prodrugs as the conjugation of an active pharmaceutical ingredient (API) to a promoiety group via a cleavable covalent linker, where both the promoiety and linker are selected to enable formulation and administration from a drug delivery system (DDS) to achieve an extended duration of action. These LA-prodrug DDS results in an extended interval where the API is within a therapeutic range without necessarily altering ADME as is typical of conventional prodrugs. The conversion of the LA-prodrug to the API is dependent on linker cleavage, which can occur before or after release from the DDS. The requirement for linker cleavage provides an additional tool to prolong release from these LA-prodrug DDS. In addition, the physicochemical properties of drugs can be tuned by promoiety selection for a particular DDS. Conjugation with promoieties that are carriers or amenable to assembly into carriers can also provide access to formulations designed for extending duration of action. LA-prodrugs have been applied to a wide variety of drug delivery strategies and are categorized in this review by promoiety size and complexity. Small molecule promoieties (typically MW < 1000 Da) have been used to improve encapsulation or partitioning as well as broaden APIs for use with traditional long-acting formulations such as solid drug dispersions. Macromolecular promoieties (typically MW > 1000 Da) have been applied to hydrogels, nanoparticles, micelles, dendrimers, and polymerized prodrug monomers. The resulting LA-prodrug DDS enable extended duration of action for active pharmaceuticals across a wide range of applications, with target release timescales spanning days to years.

Recent Advances in the Application of ATRP in the Synthesis of Drug Delivery Systems

Advances in atom transfer radical polymerization (ATRP) have enabled the precise design and preparation of nanostructured polymeric materials for a variety of biomedical applications. This paper briefly summarizes recent developments in the synthesis of bio-therapeutics for drug delivery based on linear and branched block copolymers and bioconjugates using ATRP, which have been tested in drug delivery systems (DDSs) over the past decade. An important trend is the rapid development of a number of smart DDSs that can release bioactive materials in response to certain external stimuli, either physical (e.g., light, ultrasound, or temperature) or chemical factors (e.g., changes in pH values and/or environmental redox potential). The use of ATRPs in the synthesis of polymeric bioconjugates containing drugs, proteins, and nucleic acids, as well as systems applied in combination therapies, has also received considerable attention.

Polymer modification of SARS-CoV-2 spike protein impacts its ability to bind key receptor

The global spread of SARS-CoV-2 (severe acute respiratory syndrome coronavirus-2) has caused the loss of many human lives and severe economic losses. SARS-CoV-2 mediates its infection in humans via the spike glycoprotein. The receptor binding domain of the SARS-CoV-2 spike protein binds to its cognate receptor, angiotensin converting enzyme-2 (ACE2) to initiate viral entry. In this study, we examine how polymer modification of the spike protein receptor binding domain impacts binding to ACE2. The horseradish peroxidase conjugated receptor binding domain was modified with a range of polymers including hydrophilic N,N-dimethylacrylamide, hydrophobic N-isopropylacrylamide, cationic 3-(N,N-dimethylamino)propylacrylamide, and anionic 2-acrylamido-2-methylpropane sulfonic acid polymers. The effect of polymer chain length was observed using N,N-dimethylacrylamide polymers with degrees of polymerization of 5, 10 and 25. Polymer conjugation of the receptor binding domain significantly reduced the interaction with ACE2 protein, as determined by an enzyme-linked immunosorbent assay. Stability analysis showed that these conjugates remained highly stable even after seven days incubation at physiological temperature. Hence, this study provides a detailed view of the effect specific type of modification using a library of polymers with different functionalities in interrupting RBD-ACE2 interaction.

Dual Function of β-hydroxy Dithiocinnamic Esters: RAFT Agent and Ligand for Metal Complexation

The reversible addition-fragmentation chain-transfer (RAFT) process has become a versatile tool for the preparation of defined polymers tolerating a large variety of functional groups. Several dithioesters, trithiocarbonates, xanthates, or dithiocarbamates have been developed as effective chain transfer agents (CTA), but only few examples have been reported, where the resulting end groups are directly considered for a secondary use besides controlling the polymerization. We here demonstrate that β-hydroxy dithiocinnamic esters represent a hitherto overlooked class of materials, which were originally designed for the complexation of transition metals but might as well act as reversible CTA. Modified with a suitable leaving group (R-group), these vinyl conjugated dithioesters indeed provide reasonable control over the polymerization of acrylates, acrylamides, or styrene via the RAFT process. Kinetic studies revealed linear evolutions of molar mass with conversion, while different substituents on the aromatic unit had only a minor influence. Block extensions prove the livingness of the polymer chains, although extended polymerization times may lead to side reactions. The resulting dithiocinnamic ester end groups are still able to form complexes with platinum, which verifies that the structural integrity of the end group is maintained. These findings open a versatile new route to tailor-made polymer bound metal complexes. This article is protected by copyright. All rights reserved.

Polymeric Nanostructures Containing Proteins and Peptides for Pharmaceutical Applications

Over the last three decades, proteins and peptides have attracted great interest as drugs of choice for combating a broad spectrum of diseases, including diabetes mellitus, cancer, and infectious and neurological diseases. However, the delivery of therapeutic proteins to target sites should take into account the obstacles and limitations related to their intrinsic sensitivity to different environmental conditions, fragile tertiary structures, and short half-life. Polymeric nanostructures have emerged as competent vehicles for protein delivery, as they are multifunctional and can be tailored according to their peculiarities. Thus, the enhanced bioavailability and biocompatibility, the adjustable control of physicochemical features, and the colloidal stability of polymer-based nanostructures further enable either the embedding or conjugation of hydrophobic or hydrophilic bioactive molecules, which are some of the features of paramount importance that they possess and which contribute to their selection as vehicles. The present review aims to discuss the prevalent nanostructures composed of block copolymers from the viewpoint of efficient protein hospitality and administration, as well as the up-to-date scientific publications and anticipated applications of polymeric nanovehicles containing proteins and peptides.

Thiocarbonyl Chemistry in Polymer Science

Organised by reaction type, this review highlights the unique reactivity of thiocarbonyl (C=S) groups with radicals, anions, nucleophiles, electrophiles, in pericyclic reactions, and in the presence of light. In the...

Poly(N,N-dimethylacrylamide)-coated upconverting NaYF4:Yb,Er@NaYF4:Nd core-shell nanoparticles for fluorescent labeling of carcinoma cells

Upconverting luminescent lanthanide-doped nanoparticles (UCNP) belong to promising new materials that absorb infrared light able to penetrate in the deep tissue level, while emitting photons in the visible or ultraviolet region, which makes them favorable for bioimaging and cell labeling. Here, we have prepared upconverting NaYF4:Yb,Er@NaYF4:Nd core-shell nanoparticles, which were coated with copolymers of N,N-dimethylacrylamide (DMA) and 2-(acryloylamino)-2-methylpropane-1-sulfonic acid (AMPS) or tert-butyl [2-(acryloylamino)ethyl]carbamate (AEC-Boc) with negative or positive charges, respectively. The copolymers were synthesized by a reversible addition-fragmentation chain transfer (RAFT) polymerization, reaching Mn ~ 11 kDa and containing ~ 5 mol% of reactive groups. All copolymers contained bisphosphonate end-groups to be firmly anchored on the surface of NaYF4:Yb,Er@NaYF4:Nd core-shell nanoparticles. To compare properties of polymer coatings, poly(ethylene glycol)-coated and neat UCNP were used as a control. UCNP with various charges were then studied as labels of carcinoma cells, including human hepatocellular carcinoma HepG2, human cervical cancer HeLa, and rat insulinoma INS-1E cells. All the particles proved to be biocompatible (nontoxic); depending on their ξ-potential, the ability to penetrate the cells differed. This ability together with the upconversion luminescence are basic prerequisites for application of particles in photodynamic therapy (PDT) of various tumors, where emission of nanoparticles in visible light range at ~ 650 nm excites photosensitizer.

Effect of cell culture media on photopolymerizations

Radical polymerization is one of the most widely used methods for the synthesis of polymeric materials for biomedical applications, such as drug delivery, 3D cell culture, and regenerative medicine. Among radical polymerization reactions, thiol-ene click chemistry has shown excellent orthogonality in diverse reaction conditions. However, our preliminary investigations revealed that it fails in cell culture environment. Herein, we investigate the mechanisms by which cell culture media interfere with radical photoreactions. Three different models including free radical linear photopolymerization (N,N-dimethylacrylamide photopolymerization), free radical photohydrogelation (poly(ethylene glycol) diacrylate photohydrogelation), and thiol-ene photohydrogelation (4-arm poly(ethylene glycol)-norbornene thiol-ene photohydrogelation) were investigated. We showed that common cell culture media ingredients can interfere with radical polymerization by two different pathways; namely, radical chain transfer and radical scavenging effects. Thiol-ene photoclick hydrogelation was seriously affected by cell culture media especially under the alkaline conditions of many of them, due to the impact of deprotonation of the thiol reactant. We intend these findings to serve as a reference guide to researchers employing free radical-based molecular synthesis in cell culture settings. The nonbenign impact of media components, pH, and concentration should provide a cue for future studies that aim to prepare well-defined polymeric materials in the presence of cell culture media.

Degradable polymers via olefin metathesis polymerization

The development of degradable polymers has commanded significant attention over the past half century. Approaches have predominantly relied on ring-opening polymerization of cyclic esters (e.g., lactones, lactides) and N-carboxyanhydrides, as well as radical ring-opening polymerizations of cyclic ketene acetals. In recent years, there has been a significant effort applied to expand the family of degradable polymers accessible via olefin metathesis polymerization. Given the excellent functional group tolerance of olefin metathesis polymerization reactions generally, a broad range of conceivable degradable moieties can be incorporated into appropriate monomers and thus into polymer backbones. This approach has proven particularly versatile in synthesizing a broad spectrum of degradable polymers including poly(ester), poly(amino acid), poly(acetal), poly(carbonate), poly(phosphoester), poly(phosphoramidate), poly(enol ether), poly(azobenzene), poly(disulfide), poly(sulfonate ester), poly(silyl ether), and poly(oxazinone) among others. In this review, we will highlight the main olefin metathesis polymerization strategies that have been used to access degradable polymers, including (i) acyclic diene metathesis polymerization, (ii) entropy-driven and (iii) enthalpy-driven ring-opening metathesis polymerization, as well as (iv) cascade enyne metathesis polymerization. In addition, the livingness or control of polymerization reactions via different strategies are highlighted and compared. Potential applications, challenges and future perspectives of this new library of degradable polyolefins are discussed. It is clear from recent and accelerating developments in this field that olefin metathesis polymerization represents a powerful synthetic tool towards degradable polymers with novel structures and properties inaccessible by other polymerization approaches.

pH-Responsive Amphiphilic Carboxylate Polymers: Design and Potential for Endosomal Escape

The intracellular delivery of emerging biomacromolecular therapeutics, such as genes, peptides, and proteins, remains a great challenge. Unlike small hydrophobic drugs, these biotherapeutics are impermeable to the cell membrane, thus relying on the endocytic pathways for cell entry. After endocytosis, they are entrapped in the endosomes and finally degraded in lysosomes. To overcome these barriers, many carriers have been developed to facilitate the endosomal escape of these biomacromolecules. This mini-review focuses on the development of anionic pH-responsive amphiphilic carboxylate polymers for endosomal escape applications, including the design and synthesis of these polymers, the mechanistic insights of their endosomal escape capability, the challenges in the field, and future opportunities.

Self-Immolative RAFT-Polymer End Group Modification

Reversible modifications of reversible addition-fragmentation chain transfer (RAFT)-polymerization derived end groups are usually limited to reductive degradable disulfide conjugates. However, self-immolative linkers can promote ligation and traceless release of primary and secondary amines as well as alcohols via carbonates or carbamates in β-position to disulfides. In this study, these two strategies are combined and the concept of self-immolative RAFT-polymer end group modifications is introduced: As model compounds, benzylamine, dibenzylamine, and benzyl alcohol are first attached as carbamates or carbonates to a symmetrical disulfide, and in a straightforward one-pot reaction these groups are reversibly attached to aminolyzed trithiocarbonate end groups of RAFT-polymerized poly(N,N-dimethylacrylamide). Quantitative end group modification is confirmed by ¹ H NMR spectroscopy, size exclusion chromatography, and mass spectrometry, while reversible release of attached compounds under physiological reductive conditions is successfully monitored by diffusion ordered NMR spectroscopy and thin layer chromatography. Additionally, this concept is further expanded to protein-reactive, self-immolative carbonate species that enable reversible bioconjugation of lysozyme and α-macrophage mannose receptor (MMR) nanobodies as model proteins. Altogether, self-immolative RAFT end group modifications can form the new basis for reversible introduction of various functionalities to polymer chain ends including protein bioconjugates and, thus, opening novel opportunities for stimuli-responsive polymer hybrids.

Drug Delivery: Hydrophobic Drug Encapsulation into Amphiphilic Block Copolymer Micelles

Drug encapsulation into amphiphilic block copolymer micelles aims to increase drug solubility and minimize drug degradation upon administration, avoid undesirable side effects and ameliorate drug bioavailability. Drug encapsulation methodologies including thin-film hydration method and organic cosolvent method are described in this chapter. Often, it is desirable to determine the most efficient solubilization protocol leading to functional drug delivery nanovehicles in each case. The encapsulation of curcumin into PEO-b-PPO-b-PEO (Pluronic F-127) polymeric micelles through thin-film hydration method presents the most promising results. Indomethacin can be loaded successfully into the hydrophobic cores of PEO-b-PCL amphiphilic block copolymer micelles following both encapsulation protocols.

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Reversible addition–fragmentation chain-transfer (RAFT) polymerization is a powerful tool for the precise formation of macromolecular building blocks that can be used for the construction of well-defined nanocomposites.

Aluminum Tralen Complex Meditated Reversible-Deactivation Radical Polymerization of Vinyl Acetate

The Al^III(tralen)Cl complex (tralenH₂ = N,N'-di(cyclohepta-2,4,6-trien-1-one-2-yl)-1,2-diaminobenzene) has been synthesized and applied to mediate the reversible-deactivation radical polymerization (RDRP) of vinyl monomers. The polymerization of unconjugated monomers such as vinyl acetate (VAc) and N-vinylpyrrolidone (NVP) with Al^III(tralen)Cl showed the living characters of linearly increased molecular weight with conversion and formation of block copolymer. However, the control manners in the polymerization of conjugated monomers like acrylates and styrene were limited. The electron paramagnetic resonance (EPR) spectrum indicated that Al^III(tralen)BArF (BArF = tetrakis(3,5-trifluormethylphenyl)borate) and propagating radicals formed a paramagnetic dormant species, possibly PVAc-Al^III(tralen)BArF, via the single-electron transfer to the tralen ligand.

Peptide-induced RAFT polymerization via an amyloid-β17-20-based chain transfer agent

We here describe the synthesis of a novel peptide/polymer-conjugate, embedding the amyloid-β (Aβ) protein core sequence Leu-Val-Phe-Phe (LVFF, Aβ17-20) via RAFT polymerization. Based on a novel chain transfer-agent, the "grafting-from" approach effectively generates the well-defined peptide-polymer conjugates with appreciably high monomer conversion rate, resulting in mechanically stiffer peptide-functional cross-linked polymeric hydrogels.

Effects of Chemical Modifications on the Thermoresponsive Behavior of a PDMAEA-b-PNIPAM-b-POEGA Triblock Terpolymer

In this work, the synthesis, selective chemical modifications, and self-assembly behavior in aqueous media of a novel poly(2-(dimethylamino)ethyl acrylate)₂₀-b-poly(N-isopropylacrylamide)₁₁-b-poly(oligo ethylene glycol methyl ether acrylate)₁₈ (PDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈) dual-responsive (pH and temperature) and triply hydrophilic amino-based triblock terpolymer are reported. The amine functional triblock terpolymer was synthesized by sequential reversible addition fragmentation chain transfer polymerization (RAFT) polymerization and molecularly characterized by size exclusion chromatography (SEC) and ¹H-NMR spectroscopy that evidenced the success of the three-step polymerization scheme. The tertiary amine pendant groups of the PDMAEA block were chemically modified in order to produce the Q₁PDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈ as well as the Q₆PDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈ quaternized triblock terpolymers (Q₁ and Q₆ prefixes show the number of carbon atoms (C1 and C6) attached on the PDMAEA groups) using methyl iodide (CH₃I) and 1-iodohexane (C₆H₁₃I) as the quaternizing agents and the SPDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈ sulfobetainized triblock terpolymer using 1,3 propanesultone (C₃H₆O₃S) as the sulfobetainization agent. The self-assembly properties of the triblock terpolymers in aqueous solutions upon varying temperature and solution pH were studied by light scattering and fluorescence spectroscopy experiments. The novel triblock terpolymers self-assemble into nanosized aggregates upon solution temperature rise above the nominal lower critical solution temperature (LCST) of the temperature-responsive PNIPAM block. The remarkable stimuli-responsive self-assembly behavior of the novel triblock terpolymers in aqueous media make them interesting candidates for biomedical applications in the fields of drug and gene delivery.

Synthesis and property of polyurethane elastomer for biomedical applications based on nonaromatic isocyanates, polyesters, and ethylene glycol

Polyurethane (PU) elastomers were synthesized by the reaction of HDI or IPDI diisocyanates and poly(ε-caprolactone) (PCL or poly(ethylene adipate) (PA) diols and ethylene glycol as a polymer chain extender. IR, 1H, and 13C NMR spectroscopy and X-ray analysis were used for the structural analysis of the formed films. The molecular weight distribution was examined by GPC chromatography. Based on the measured contact angles, free surface energy parameters were calculated. The obtained results were analyzed for the possible use of these polyurethanes as biomaterials. The most promising in this respect was PU-3, which was synthesized from IPDI and PCL. This was due to its high molecular weight of approximately 90,000, the presence of a crystalline phase, and the relatively high hydrophobicity, with a SEP value below 25 mJ/m2. These films showed a good resistance to hydrolysis during incubation in Baxter physiological saline during 6 weeks. Both Gram-positive (Bacillus sp.) and Gram-negative (Pseudomonas sp.) types of bacterial strains were used to test the biodegradation property. Synthesized PUs are biodegradable and showed moderate or even mild cytotoxicity against human normal fibroblasts (BJ) and immortalized keratinocytes (HaCaT), estimated with direct contact assay. The most biocompatible was PU-3 film, which revealed rather mild reactivity against both cell lines, and the least was PU-2 film, synthesized from HDI and PA (severe toxicity for HaCaTs).

Polymers with Dithiobenzoate End Groups Constitutively Release Hydrogen Sulfide upon Exposure to Cysteine and Homocysteine

Dithioesters are well-established as efficient reversible addition-fragmentation chain transfer (RAFT) agents. More recently, certain small molecule dithioesters have been reported to release the biological signaling molecule hydrogen sulfide (H₂S) upon exposure to cysteine. Herein, we examine the propensity of polymers synthesized using RAFT with a dithioester chain transfer agent to release H₂S via reaction of cysteine with constitutive dithioester end-groups. Homocysteine-triggered release of H₂S from these materials is also observed, with evidence suggesting that the mechanism is analogous to the reaction with cysteine.

Folate decorated polymeric micelles for targeted delivery of the kinase inhibitor dactolisib to cancer cells

One of the main challenges in clinical translation of polymeric micelles is retention of the drug in the nanocarrier system upon its systemic administration. Core crosslinking and coupling of the drug to the micellar backbone are common strategies to overcome these issues. In the present study, polymeric micelles were prepared for tumor cell targeting of the kinase inhibitor dactolisib which inhibits both the mammalian Target of Rapamycin (mTOR) kinase and phosphatidylinositol-3-kinase (PI3K). We employed platinum(II)-based linker chemistry to couple dactolisib to the core of poly(ethylene glycol)-b-poly(acrylic acid) (PEG-b-PAA) polymeric micelles. The formed dactolisib-PEG-PAA unimers are amphiphilic and self-assemble in an aqueous milieu into core-shell polymeric micelles. Folate was conjugated onto the surface of the micelles to yield folate-decorated polymeric micelles which can target folate receptor over-expressing tumor cells. Fluorescently labeled polymeric micelles were prepared using a lissamine-platinum complex linked in a similar manner as dactolisib. Dactolisib polymeric micelles showed good colloidal stability in water and released the coupled drug in buffers containing chloride or glutathione. Folate decorated micelles were avidly internalized by folate-receptor-positive KB cells and displayed targeted cellular cytotoxicity at 50-75 nM IC₅₀. In conclusion, we have prepared a novel type of folate-receptor targeted polymeric micelles in which platinum(II) linker chemistry modulates drug retention and sustained release of the coupled inhibitor dactolisib.

Parallel evolution of polymer chemistry and immunology: Integrating mechanistic biology with materials design

To develop new therapeutics involves the interaction of multiple disciplines to yield safe, functional devices and formulations. Regardless of drug function and potency, administration with controlled timing, dosing, and targeting is required to properly treat or regulate health and disease. Delivery approaches can be optimized through advances in materials science, clinical testing, and basic biology and immunology. Presently, laboratories focused on developing these technologies are composed of, or collaborate with, chemists, biologists, materials scientists, engineers, and physicians to understand the way our body interacts with drug delivery devices, and how to synthesize new, rationally designed materials to improve targeted and controlled drug delivery. In this review, we discuss both device-based and micro/nanoparticle-based materials in the clinic, our biologic understanding of how our immune system interacts with these materials, how this diverse set of immune cells has become a target and variable in drug delivery design, and new directions in polymer chemistry to address these interactions and further our advances in medical therapeutics.

Blue LED light-activated RAFT polymerization of PEG acrylate with high chain-end fidelity for efficient PEGylation

Well-defined PPEGAs with high chain-end fidelity are synthesized through blue LED light-initiated RAFT, with their efficient PEGylation potential highlighted.

Bioactive Peptide Brush Polymers via Photoinduced Reversible-Deactivation Radical Polymerization

Harnessing metal-free photoinduced reversible-deactivation radical polymerization (photo-RDRP) in organic and aqueous phases, we report a synthetic approach to enzyme-responsive and pro-apoptotic peptide brush polymers. Thermolysin-responsive peptide-based polymeric amphiphiles assembled into spherical micellar nanoparticles that undergo a morphology transition to worm-like micelles upon enzyme-triggered cleavage of coronal peptide sidechains. Moreover, pro-apoptotic polypeptide brushes show enhanced cell uptake over individual peptide chains of the same sequence, resulting in a significant increase in cytotoxicity to cancer cells. Critically, increased grafting density of pro-apoptotic peptides on brush polymers correlates with increased uptake efficiency and concurrently, cytotoxicity. The mild synthetic conditions afforded by photo-RDRP, make it possible to access well-defined peptide-based polymer bioconjugate structures with tunable bioactivity.

pH and thermal dual-responsive poly(NIPAM-co-GMA)-coated magnetic nanoparticles via surface-initiated RAFT polymerization for controlled drug delivery

Herein, a novel type of multifunctional magnetic nanoparticles with dual thermal and pH-responsive behavior was fabricated as the carrier for delivery of doxorubicin (DOX). Fe₃O₄@SiO₂ magnetic nanoparticles, were grafted with polymer brushes consisting of poly (NIPAM-co-GMA) (PNG) chains via surface initiated reversible addition-fragmentation chain transfer (SI-RAFT) polymerization. The polymer brushes were then modified with hydrazine groups as DOX binding sites. The prepared multifunctional magnetic nanoparticles were characterized by FT-IR, ¹H NMR, XPS, TGA, DLS, VSM, GPC, TEM, and XRD analysis. The in vitro drug release of the multifunctional magnetic nanoparticles was examined at 37 °C (above LCST) and 25 °C (below LCST) in different pH media and exhibited excellent pH- and thermo-sensitive behavior. The results show that the Fe₃O₄@SiO₂@PNG-Hy fabricated via SI-RAFT polymerization is a viable candidate material for tumor treatment studies.

Comparison of Thermoresponsive Hydrogels Synthesized by Conventional Free Radical and RAFT Polymerization

We compared the influence of the polymerization mechanism onto the physical characteristics of thermoresponsive hydrogels. The Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels were successfully synthesized using reversible addition-fragmentation chain-transfer (RAFT) and free radical polymerization (FRP). The gels were prepared while using different crosslinker feed and monomer concentration. The swelling, dye release, and hydrolytic stability of the gels were investigated in water, or in representative komostrope and chaotrope salt solutions at room temperature and at 37 °C. It was found that the swelling ratio (SR) of the RAFT gels was significantly higher than that of the FRP gels; however, an increased crosslinking density resulted in a decrease of the SR of the RAFT gels as compared to the corresponding gels that are made by FRP, which indicates the limitation of the cross-linking efficiency that is attained in RAFT polymerization. Additionally, an increased monomer concentration decreased the SR of the RAFT gels, whereas a similar SR was observed for the FRP gels. However, the SR of both RAFT and FRP gels in NaSCN and Na₂SO₄ solutions were similar. Finally, the rate of dye release was significantly slower from the RAFT gels than the FRP gels and the hydrolytic stability of the RAFT gels was lower than that of FRP gels in water, but maintained similar stability in Na₂SO₄ and NaSCN solutions.

Synthesis and characterization of amphiphilic star-shaped copolymers based on β-cyclodextrin for micelles drug delivery

PURPOSE

A series of β-CD amphiphilic star-shaped copolymers with exceptional characteristics were synthesized and their potential as carriers for micelles drug delivery was investigated.

METHODS

A series of amphiphilic copolymers based on β-CD were synthesized by introducing poly (acrylic acid)-co-poly(methyl methacrylate)-poly (vinyl pyrrolidone) or poly (acrylic acid)-co-poly(methyl methacrylate)-co-poly(monoacylated-β-CD)-poly (vinyl pyrrolidone) blocks to the primary hydroxyl group positions of β-CD. The micellization behavior of the copolymers, the synthesis conditions, characteristics, drug release in vitro and tissue distribution of vinpocetine (VP) micelles in vivo were investigated.

RESULTS

Around 60 types of β-CD amphiphilic star-shaped copolymers were successfully synthesized and the critical micelle concentration ranged from 9.80 × 10^-4 to 5.24 × 10^-2g/L. The particle size, drug loading and entrapment efficiency of VP-loaded β-CD-P₄ micelles prepared with optimal formulation were about 65 nm, 21.44 ± 0.14%, and 49.05 ± 0.36%, respectively. The particles had good sphericity. The cumulative release rates at 72 h of VP-loaded β-CD-P₄ micelles in pH 1.0, pH 4.5, pH 6.5, or pH 7.4 media were 93%, 69%, 49%, and 43%, respectively. And, the lung targeting efficiency of VP-loaded β-CD-P₄ micelles was 8.98 times higher than that of VP injection.

CONCLUSION

The VP-loaded β-CD-P₄ micelles exhibited controlled-release property, pH-induced feature and lung targeting capacity compared with VP injection, suggesting that the β-CD-P₄ copolymers are an excellent candidate for micelles drug delivery.

Dual Polymerizations: Untapped Potential for Biomaterials

Block copolymers with unique architectures and those that can self-assemble into supramolecular structures are used in medicine as biomaterial scaffolds and delivery vehicles for cells, therapeutics, and imaging agents. To date, much of the work relies on controlling polymer behavior by varying the monomer side chains to add functionality and tune hydrophobicity. Although varying the side chains is an efficient strategy to control polymer behavior, changing the polymer backbone can also be a powerful approach to modulate polymer self-assembly, rigidity, reactivity, and biodegradability for biomedical applications. There are many developments in the syntheses of polymers with segmented backbones, but these developments are not widely adopted as strategies to address the unique constraints and requirements of polymers for biomedical applications. This review highlights dual polymerization strategies for the synthesis of backbone-segmented block copolymers to facilitate their adoption for biomedical applications.

Stimuli-responsive polymer-doxorubicin conjugate: Antitumor mechanism and potential as nano-prodrug

Polymer-drug conjugates has significantly improved the anti-tumor efficacy of chemotherapeutic drugs and alleviated their side effects. N-(1,3-dihydroxypropan-2-yl) methacrylamide (DHPMA) copolymer was synthesized via RAFT polymerization and polymer-doxorubicin (DOX) (diblock pDHPMA-DOX) were formed by conjugation, resulting in a self-aggregation-induced nanoprodrug with a favorable size of 21 nm and great stability. The nanoprodrug with a molecular weight (MW) of 95 kDa released drugs in response to tumor microenvironmental pH variations and they were enzymatically hydrolyzed into low MW segments (45 kDa). The nanoprodrug was transported through the endolysosomal pathway, released the drug into the cytoplasm and some was localized in the mitochondria, resulting in disruption of the cellular actin cytoskeleton. Cellular apoptosis was also associated with reduction in the mitochondrial potential caused by the nanoprodrug. Notably, the nanoprodrug had a significantly prolonged blood circulation time with an elimination half time of 9.8 h, displayed high accumulation within tumors, and improved the in vivo therapeutic efficacy against 4T1 xenograft tumors compared to free DOX. The tumor xenograft immunohistochemistry study clearly indicated tumor inhibition was through the inhibition of cell proliferation and antiangiogenic effects. Our studies demonstrated that the diblock pDHPMA-DOX nanoprodrug with a controlled molecular structure is promising to alleviate adverse effects of free DOX and have a great potential as an efficient anticancer agent. STATEMENT OF SIGNIFICANCE: In this work, we prepared a biodegradable diblock DHPMA polymer-doxorubicin conjugate via one-pot of RAFT polymerization and conjugate chemistry. The conjugate-based nanoprodrug was internalized by endocytosis to intracellularly release DOX and further induce disruption of mitochondrial functions, actin cytoskeleton alterations and cellular apoptosis. The nanoprodrug with a high molecular weight (MW) (95 kDa) showed a long blood circulation time and achieved high accumulation into tumors. The nanoprodrug was degraded into low MW (∼45 kDa) products below the renal threshold, which ensured its biosafety. Additionally, the multi-stimuli-responsive nanoprodrug demonstrated an enhanced antitumor efficacy against 4T1 breast tumors and alleviated side effects, showing a great potential as an efficient and safe anticancer agent.

Contact Lens Materials: A Materials Science Perspective

More is demanded from ophthalmic treatments using contact lenses, which are currently used by over 125 million people around the world. Improving the material of contact lenses (CLs) is a now rapidly evolving discipline. These materials are developing alongside the advances made in related biomaterials for applications such as drug delivery. Contact lens materials are typically based on polymer- or silicone-hydrogel, with additional manufacturing technologies employed to produce the final lens. These processes are simply not enough to meet the increasing demands from CLs and the ever-increasing number of contact lens (CL) users. This review provides an advanced perspective on contact lens materials, with an emphasis on materials science employed in developing new CLs. The future trends for CL materials are to graft, incapsulate, or modify the classic CL material structure to provide new or improved functionality. In this paper, we discuss some of the fundamental material properties, present an outlook from related emerging biomaterials, and provide viewpoints of precision manufacturing in CL development.