Laccase: A potential biocatalyst for pollutant degradation

Laccase based per- and polyfluoroalkyl substances degradation: Status and future perspectives

Per- and polyfluoroalkyl substances (PFAS) with stable carbon-fluorine bonds are used in a wide range of industrial and commercial applications. Due to their extreme environmental persistence, PFAS have the potential to bioaccumulate, cause adverse effects, and present challenges regarding remediation. Recently, microbial and enzymatic reactions for sustainable degradation of PFAS have gained attention from researchers, although biological decomposition of PFAS remains challenging. Surprisingly, laccases, the multi-copper oxidases produced by various organisms, showed potential for PFAS degradation. Mediators play key roles in initiating laccase induced PFAS degradation and defluorination reactions. The laccase-catalyzed PFAS degradation reactions are relatively slower than normal biocatalytic reactions and the low activity of native laccases constrains their capacity to complete defluorination. With their low redox potential and narrow substrate scope, an innovative remediation strategy must be taken to accelerate this reaction. In this review we have summarized the status, challenges, and future perspectives of enzymatic PFAS degradation. The knowledge of laccase-based defluorination and the molecular basis of the reaction mechanisms overviewed in this study could inform future applications of laccases for sustainable PFAS remediation.

One-step construction of bioinspired multi-enzyme mimicking nanozyme as a universal platform for multi-mode sensing and catalytic degradation

Nanozymes, a category of nanomaterials with exceptional enzyme-like activity, exhibit the significant promise to overcome the inherent limitations of natural enzymes. Inspired by the active site structure of natural laccase, a biomimetic MA-Cu nanozyme with three-dimensional network structure was constructed in water system through one-step complexation based on the specific coordination between nitrogen-rich triazine heterocyclic melamine and Cu2+, in a facile, green and economical manner. Compared to natural laccase, MA-Cu possesses superior multi-enzyme mimicking activity, stability and cost-effectiveness. Through comprehensive characterizations, activity tests and theoretical calculations, the catalytic mechanism and the ligand-tunability of enzyme-like activity have been thoroughly investigated. Based on its multi-enzyme-like activities, a multifunctional monitoring platform for sulfide in food, epinephrine in preparations and glutathione in cells was successfully constructed, respectively. Notably, a green degradation and discrimination platform based on MA-Cu for various pollutants was developed, exhibiting distinguished substrate universality and detoxication capacity. As a stable, easily scalable and commercially applicable nanozyme, MA-Cu is expected to become a compelling candidate for replacing natural enzyme, showing excellent prospects in environmental remediation and biosensing.

Co-immobilization of laccase and zinc oxide nanoparticles onto bacterial cellulose to achieve synergistic effect of photo and enzymatic catalysis for biodegradation of favipiravir

The environmental persistence of pharmaceuticals represents a significant threat to aquatic ecosystems and human health, while limitations in conventional wastewater treatment methods underscore the urgent need for innovative and eco-friendly degradation strategies. Photobiocatalytic approaches provide a promising solution for the effective degradation of pharmaceutical contaminants by harnessing the synergistic effects of both photocatalysts and biocatalysts. In this study, we developed a photobiocatalytic composite by co-immobilizing laccase enzyme and zinc oxide nanoparticles on bacterial cellulose synthesized from orange peel waste. The optimal conditions for achieving maximum yield and efficiency of immobilization were investigated and the successful preparation of the composite was confirmed using infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The immobilized laccase showed Km and Vmax values of 0.68 ± 0.23 mM and 5.4 ± 0.86 μmol/min/L, respectively. The prepared composite was efficiently applied for degradation of favipiravir under optimum conditions including pH, temperature, and incubation time values of 4.0, 50 °C, and 90 min, respectively. The presence of ZnO nanoparticles in the structure of the photobiocatalyst significantly decreased the time of removal in comparison with both free and immobilized laccases. Although 80 ± 5.5 % of the enzyme activity was kept after 10 runs, the prepared photobiocatalyst retained 50 ± 4.6 % of its initial activity after 10 independent cycles. The study showed that the synergistic effects of laccase and ZnO nanoparticles possess the potentials to enhance degradation efficiency through combined light-driven and enzymatic approaches.

Isolation and screening of wood-decaying fungi for lignocellulolytic enzyme production and bioremediation processes

The growing demand for novel enzyme producers to meet industrial and environmental needs has driven interest in lignocellulose-degrading fungi. In this study, lignocellulolytic enzyme production capabilities of environmental fungal isolates collected from boreal coniferous and nemoral summer green deciduous forests were investigated, using Congo Red, ABTS, and Azure B as indicators of cellulolytic and ligninolytic enzyme productions. Through qualitative and quantitative assays, the study aimed to identify promising species for lignocellulose-degrading enzyme secretion and assess their potential for biotechnological applications. Primary screening tests showed intensive enzyme secretion by certain isolates, particularly white rot fungi identified as Trametes pubescens and Cerrena unicolor. These fungi exhibited high efficiency in degrading Congo Red and Azure B. The isolates achieved up to a 93.30% decrease in Congo Red induced color intensity and over 78% decolorization of Azure B within 168 hours. Within 336 hours, these fungi reached nearly 99% removal of Congo Red and up to 99.79% decolorization of Azure B. Enzyme activity analysis confirmed the lignin-degrading capabilities of T. pubescens, which exhibited laccase activity exceeding 208 U/mL. Furthermore, Fomitopsis pinicola showed the highest cellulose-degrading potential among the studied fungi, achieving cellulase activity over 107 U/L during Congo Red decolorization. Previously undescribed enzyme-producing species, such as Peniophora cinerea, Phacidium subcorticalis, and Cladosporium pseudocladosporioides, also demonstrated promising lignocellulolytic enzyme production potential, achieving up to 98.65% and 99.80% decolorization of Congo Red and Azure B, respectively. The study demonstrates novel candidates for efficient lignocellulolytic enzyme production with broad biotechnological applications such as biomass conversion, wastewater treatment, textile dye and other complex chemical removal, and environmental remediation.

A phytoremediation approach for the restoration of coal fly ash polluted sites: A review

Coal fly ash (CFA) is a predominant waste by-product of coal combustion which is disposed of in open ash dams that utilize large pieces of land. This waste material is classified as a hazardous substance in South Africa as well as in other countries due to its fine particles that are easily blown to the atmosphere and the unacceptable levels of heavy metals and persistent organic pollutants. Contaminants in CFA can pollute surface and ground water, agricultural sites, soil and therefore pose risks to the health of humans and the environment. More than 500 million tons of CFA is produced yearly and over 200 million tons remain unused globally. The production will continue due to high consumer energy demands, especially in countries with heavy reliance on coal for power generation. Despite a significant progress made on the application of phytoremediation approach for decontamination of polluted sites, there is very limited evidence for its potential in the rehabilitation of CFA dumps. Low organic carbon, microbial activities and availability of nutrients including nitrogen contribute to restricted plant growth in CFA, and therefore converting ash dumps to barren lands devoid of vegetation. Leguminous plant species can fix atmospheric nitrogen through symbiotic association with bacteria. Therefore, their intercropping mixture development can improve the chemistry of the substrate and facilitate nutrients availability to the companion plants. This approach can enhance the performance of phytoremediation and promote sustainable practices. The paper provides an overview of the ongoing burden of CFA disposal and discusses the ecological and economic benefits of using legumes, aromatic and bioenergy plants. We identify knowledge gaps to establishing vegetation in ash dumping sites, and provide insights to encourage continued research that will enhance the applicability of phytoremediation in restoration programs.

Laccase-based biocatalytic systems application in sustainable degradation of pharmaceutically active contaminants

The outflow of pharmaceutically active chemicals (PhACs) exerts a negative impact on biological systems even at extremely low concentrations. For instance, enormous threats to human and aquatic species have resulted from the widespread use of antibiotics in ecosystems, which stimulate the emergence and formation of antibiotic-resistant bacterial species and associated genes. Additionally, it is challenging to eliminate these PhACs by employing conventional physicochemical water treatment techniques. Enzymatic approaches, including laccase, have been identified as a promising alternative to eliminate a broad array of PhACs from water matrices. However, their application in environmental bioremediation is hindered by several factors, including the enzyme's stability and its location in the aqueous environment. Such obstacles may be surmounted by employing laccase immobilization, which enables enhanced stability (including inactivation caused by the substrate), and thus improved catalysis. This review emphasizes the potential hazards of PhACs to aquatic organisms within the detection concentration range of ngL-1 to µgL-1, as well as the deployment of laccase-based multifunctional biocatalytic systems for the environmentally friendly mitigation of anticancer drugs, analgesics/NSAIDs, antibiotics, antiepileptic agents, and beta blockers as micropollutants. This approach could reduce the underlying toxicological consequences. In addition, current developments, potential applications, and viewpoints have focused on computer-assisted investigations of laccase-PhACs binding at enzyme cavities and degradability prediction.

Precision Thermostability Predictions: Leveraging Machine Learning for Examining Laccases and Their Associated Genes

Laccases, multi-copper oxidases, play pivotal roles in the oxidation of a variety of substrates, impacting numerous biological functions and industrial processes. However, their industrial adoption has been limited by challenges in thermostability. This study employed advanced computational models, including random forest (RF) regressors and convolutional neural networks (CNNs), to predict and enhance the thermostability of laccases. Initially, the RF model estimated melting temperatures with a training mean squared error (MSE) of 13.98, and while it demonstrated high training accuracy (93.01%), the test and validation MSEs of 48.81 and 58.42, respectively, indicated areas for model optimization. The CNN model further refined these predictions, achieving lower training and validation MSEs, thus demonstrating enhanced capability in discerning complex patterns within genomic sequences indicative of thermostability. The integration of these models not only improved prediction accuracy but also provided insights into the critical determinants of enzyme stability, thereby supporting their broader industrial application. Our findings underscore the potential of machine learning in advancing enzyme engineering, with implications for enhancing industrial enzyme stability.

An overview on polyurethane-degrading enzymes

Polyurethanes (PUR) are durable synthetic polymers widely used in various industries, contributing significantly to global plastic consumption. PUR pose unique challenges in terms of degradability and recyclability, as they are characterised by intricate compositions and diverse formulations. Additives and proprietary structures used in commercial PUR formulations further complicate recycling efforts, making the effective management of PUR waste a daunting task. In this review, we delve into the complex challenge of enzymatic degradation of PUR, focusing on the structural and functional attributes of both enzymes and PUR. We also present documented native enzymes with reported efficacy in hydrolysing specific bonds within PUR, analysis of these enzyme structures, reaction mechanisms, substrate specificity, and binding site architecture. Furthermore, we propose essential features for the future redesign of enzymes to optimise PUR biodegradation efficiency. By outlining prospective research directions aimed at advancing the field of enzymatic biodegradation of PUR, we aim to contribute to the development of sustainable solutions for managing PUR waste and reducing environmental pollution.

Elucidating the bioremediation potential of laccase and peroxidase enzymes from Bacillus ligniniphilus L1 in antibiotic degradation: A computationally guided study

This study showcased the antibiotic degradation abilities of laccase and catalase-peroxidase from Bacillus ligniniphilus L1, an extremophile, against 18 common antibiotics using computationally guided approach. Molecular docking and simulation identified six enzyme-antibiotic complexes for laccase and four for catalase-peroxidase, demonstrating significant binding affinity and stability. Enzyme activity assays corroborated computational results, indicating both enzymes could degrade all tested antibiotics with varying efficiencies. L1 laccase outperformed commercial laccase against five antibiotics, notably vancomycin, levofloxacin, tobramycin, linezolid, and rifamycin, with enhanced degradation potential upon ABTS addition. Catalase-peroxidase from L1 exhibited superior degradation efficiency over commercial peroxidase against vancomycin, linezolid, tobramycin, and clindamycin. Overall, this study underscores the computational approach's utility in understanding enzyme-mediated antibiotic degradation, offering insights into environmental contaminant remediation.

Substitution of the Axial Type 1 Cu Ligand Affords Binding of a Water Molecule in Axial Position Affecting Kinetics, Spectral, and Structural Properties of the Small Laccase Ssl1

Multicopper oxidases use Cu ions as cofactors to oxidize various substrates. High reduction potential at Type 1 Cu is considered as crucial for effective catalysis. Previous studies have shown that replacing the axial methionine ligand of the Type 1 Cu with leucine or phenylalanine leads to an increased reduction potential, but not always to higher enzyme activity. Here we present a study on six variants of the small laccase Ssl1 from Streptomyces sviceus, where the axial methionine ligand was substituted, and the effect of the axial ligand on reduction potential, activity, spectral properties and structure was investigated. Absorption, electronic circular dichroism and EPR spectra revealed the presence of a stronger coordinating axial ligand like oxygen, which influences the electronic and catalytic properties more than the nature of the amino acid side chain. The crystal structures of the Ssl1 variants were solved, which show that none of the amino acid side chains coordinate to the Cu. Instead, a water molecule is found in the axial coordination site, which support the spectroscopic data. Our findings highlight the importance of combining structural and spectroscopic methods to investigate the effect of amino acid exchange on multicopper oxidases.

The High-Efficiency Degradation of Multiple Mycotoxins by Lac-W Laccase in the Presence of Mediators

Mycotoxin cocontamination is a severe threat to health and economic security worldwide. The mycotoxins aflatoxin B1 (AFB1), zearalenone (ZEN), deoxynivalenol, T-2 toxin, fumonisin B1, and ochratoxin A are of particular concern due to their substantial toxicity. Lac-W is a laccase with the unique property of degrading these six mycotoxins in the absence of redox mediators. Nevertheless, their degradation rates are low. This work aims to improve the ability of Lac-W to degrade these six mycotoxins and to elucidate its detoxification mechanism. Including redox mediators increased the Lac-W degradation efficiency drastically, and completely degraded AFB1 and ZEN within one hour. Additionally, Lac-W-AS has good temperature, pH, and ions adaptability in ZEN degradation. Lac-W-AS reduced the ZEN toxicity because ZEN degradation products significantly restored the bioluminescence intensity of Vibrio fischeri. A Lac-W-AS-mediated oxidation product of ZEN was structurally characterized as 15-OH-ZEN by UHPLC-MS/MS. Linear sweep voltammetry showed that AS affected the potential of Lac-W and accelerated the oxidation of ZEN. Finally, the combination of mediators (acetosyringone and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonate)) improved the degradation rate of mycotoxins. This work highlights that the combination of Lac-W with mediators serves as a good candidate for degrading multi-mycotoxin contaminants in food and feedstuff.

Mrlac1, an extracellular laccase, is required for conidial morphogenesis as well as the well adaptability in field of Metarhizium rileyi

Acting as an extremely promising fungal pesticide, Metarhizium rileyi exhibits robust insecticidal activity against Lepidoptera pests, particularly the larvae. Though there is a slight delay in efficacy, biopesticides offer salient advantages over traditional chemical pesticide especially in environmental safety, cyclic infection and resistant inhibition. In this study, an exterior T-DNA was randomly inserted into the genome of M. rileyi, resulting in the acquisition of a mutant strain that displayed a colour transition from green to yellow within its conidia. The disruption of Mrlac1, a laccase, has been confirmed to attribute to the epigenetic alterations. Mrlac1 is a secreted protein harboring an N-terminal signaling peptide that undergoes in vivo synthesis and accumulates on the cell wall of M. rileyi. Targeted knock-out mutant exhibited alterations not just in conidia coloration, but significantly diminished capacity to withstand external stressors, particularly non-biological factors such as high humidity, Congo red exposure, and UV radiation. The disruptant suffered a constraint on hyphal polar growth, alteration in conidial surface structure, as well as noticeable increase in adhesion forces between conidia, the core infection factors. There is a remarkable diminution in virulence of Mrlac1 deletion variant against larvae of Spodoptera litura by topical inoculation, but not hemolymph injection. Our findings suggest that Mrlac1 acts as a positive regulator in the normal morphogenesis of fungal conidia, encompassing pigment production, inter-conidia adhesion, and conidial cell wall integrity, while the preservation of these structures holds paramount importance for the survival and infection of M. rileyi in the field.

Photothermal degradation of triphenylmethane dye wastewater by Fe3O4@C-laccase

The degradation of synthetic dye wastewater is important for green chemistry and cost-effectiveness. In this study, we developed Fe3O4@C-laccase (laccase immobilized on Fe3O4@C nanoparticles) for photothermal degradation of high concentration of triphenylmethane dye wastewater. The Fe3O4@C-laccase possessed superior pH and thermal stabilities, as well as excellent tolerance to organic solvents, inhibitors, and metal ions. Laccase activity assays revealed that the activity recovery was approximately 118.2 %. Furthermore, the Fe3O4@C-laccase presented rapid and sustainable photothermal degradation capabilities to triphenylmethane dye wastewater. The initial removal efficiencies of 400 mg/L malachite green (MG), 400 mg/L brilliant green (BG), 100 mg/L crystal violet (CV), and 600 mg/L mixed dye (MG:BG:CV = 1:1:1) wastewater were approximately 99.8 %, 99.9 %, 96.4 % and 99.2 % by 60 min treatment, respectively. After undergoing 10 batches of reuse, the photothermal degradation efficiencies of the triphenylmethane dye wastewater remained consistently high, at about 99.3 %, 97.4 %, 94.0 %, and 95.1 %, respectively. The excellent photothermal degradation properties indicate that the Fe3O4@C-laccase holds promise for addressing high concentration of textile wastewater in various applications.

Laccase surface-display for environmental tetracycline removal: From structure to function

Facing the increasingly prominent tetracycline pollution and the resulting environmental problems, how to find environmental and efficient treatment means is one of the current research hotspots. In this study, the laccase surface-display technology for tetracycline treatment was investigated. Via study, the type of anchoring protein had a minor influence on the laccase ability, while the type of laccase showed a major impact. Bacillus subtilis spore coat protein (CotA) exhibited higher laccase activity, stability, and efficiency in degrading tetracycline than Pleurotus ostreatus laccase 6 (Lacc6). The superiority of bacterial laccase over fungal laccase was elucidated from the perspective of crystal structure. Besides, a variety of technical means were used to verify the success of surface-display. pGSA-CotA surface-displayed bacteria exhibited good tolerance to high temperature, pH, and various heavy metals. Importantly, surface-displayed bacteria showed faster degradation efficiency and better treatment effects than the intracellular expression bacteria in tetracycline degradation. This implies that surface display technology has greater potential for laccase-mediated environmental remediation. Due to the adverse impacts of tetracycline on soil enzyme activity and microorganisms, our study found that pGSA-CotA surface-displayed bacteria can alleviate tetracycline stress in soil and partially activate the soil, thereby increasing soil enzyme activity and certain nitrogen cycling genes.

Enhanced degradation of phenolic pollutants by a novel cold-adapted laccase from Peribacillus simplex

Laccase (EC 1.10.3.2), as eco-friendly biocatalysts, holds immense potential for sustainable applications across various environmental and industrial sectors. Despite the growing interest, the exploration of cold-adapted laccases, especially their unique properties and applicability, remains limited. In this study, we have isolated, cloned, expressed, and purified a novel laccase from Peribacillus simplex (GenBank: PP430751), which was derived from permafrost layer. The recombinant laccase (PsLac) exhibited optimal activity at 30 °C and a pH optimum of 3.5. Remarkably, PsLac exhibited remarkable stability in the presence of organic solvents, with its enzyme activity increasing by 20 % after being incubated in a 30 % trichloromethane solution for 12 h, compared to its initial activity. Furthermore, the enzyme preserved 100 % of its activity after undergoing eight freeze-thaw cycles. Notably, the catalytic center of PsLac contains Zn2+ instead of the typically observed Cu2+ found in other laccases, and metal-ion substitution experiments raised the catalytic efficiency to 3-fold when Zn2+ was replaced with Fe2+. Additionally, PsLac has demonstrated a proficient ability to degrade phenolic pollutants, such as hydroquinone, even at a low temperature of 16 °C, positioning it as a promising candidate for environmental bioremediation and contributing to cleaner production processes.

Competitive antagonistic action of laccase between Trichoderma species and the newly identified wood pathogenic Ganoderma camelum

Ganoderma, a well-known genus in the Ganodermataceae family, has caused the extinction of several tree species due to its pathogenicity. This study explored the pathogenic effect of a newly identified Ganoderma species on trees and its competitive efficiency against Trichoderma species. Ganoderma camelum sp. nov. is characterized by small sessile basidiomata and a velvety, soft, camel-brown pileus. Phylogenetic analysis and ITS rDNA sequences indicated that the species were Trichoderma and Ganoderma camelum. Both fungal species competed antagonistically by secreting laccase. The laccase activity of G. camelum, with a value of 8.3 ± 4.0 U/mL, demonstrated the highest competitive activity against Trichoderma species. The laccase produced by T. atroviride (2.62 U/mL) was most effective in countering the pathogenic action of the novel G. camelum. The molecular weights of laccase were determined using SDS-PAGE (62.0 kDa for G. camelum and 57.0 kDa for T. atroviride). Due to the white rot induced by this Ganoderma species in the host tree, G. camelum showed the highest percentage inhibition of radial growth (76.3%) compared to T. atroviride (28.7%). This study aimed to evaluate the competitive antagonistic activity of Ganoderma and Trichoderma on malt extract agar media in the context of white rot disease in the host tree. This study concluded that the laccase from G. camelum caused weight loss in rubber wood blocks through laccase action, indicating tissue injury in the host species. Therefore, it was also concluded that G. camelum was more effective in pathogenic action of the host and resisted the biological action of T. atroviride. In principal components analysis (PCA), all the species associated with laccase exhibited a very strong influence on the variability of the system. The PIRG rate (percentage inhibition of radial growth) was strongly and positively correlated with laccase activity.

Laccase-mediated chemoselective C-4 arylation of 5-aminopyrazoles

Chemoselective arylation of 5-aminopyrazoles was performed through oxidative formation of orthoquinones from catechols catalyzed by Myceliophthora thermophila laccase (Novozym 51003), and subsequently nucleophilic attack of 5-aminopyrazole to the catechol intermediates. The C-4 arylated products were obtained under extremely mild conditions without the need for amine protection or halogenation of the substrates. From this method, 10 derivatives with moderate to good efficiency (42-94%) were prepared.

Gene expression analysis for stem browning in the mushroom Lentinula edodes

The mushroom Lentinula edodes, is consumed worldwide and has high industrial value because of its rich content of bioactive compounds such as ergothioneine and eritadenine. Currently, mainstream artificial cultivation methods for this mushroom typically use synthetic logs. However, browning of the stem's interior (stem browning) has been observed during the cultivation in some L. edodes strains. Although browning does not affect the taste or other qualities of the mushroom, it gives consumers a perception of "poor quality", and is a major challenge for producers. To identify the genes responsible for stem browning in this mushroom, we performed differential gene expression analysis during stem browning development and quantified it using real-time PCR. Our results indicated that certain oxidoreductases, such as tyrosinase and laccase, were significantly upregulated during the progression of stem browning. The results obtained in the present study provide valuable insights to address the problem of stem browning in mushroom L. edodes.

A Bioinspired Single-Atom Fe Nanozyme with Excellent Laccase-Like Activity for Efficient Aflatoxin B1 Removal

The applications of natural laccases are greatly restricted because of their drawbacks like poor biostability, high costs, and low recovery efficiency. M/NC single atom nanozymes (M/NC SAzymes) are presenting as great substitutes due to their superior enzyme-like activity, excellent selectivity and high stability. In this work, inspired by the catalytic active center of natural enzyme, a biomimetic Fe/NC SAzyme (Fe-SAzyme) with O2-Fe-N4 coordination is successfully developed, exhibiting excellent laccase-like activity. Compared with their natural counterpart, Fe-SAzyme has shown superior catalytic efficiency and excellent stability under a wide range of pH (3.0-9.0), temperature (4-80 °C) and NaCl strength (0-300 mm). Interestingly, density functional theory (DFT) calculations reveal that the high catalytic performance is attributed to the activation of O2 by O2-Fe-N4 sites, which weakened the O─O bonds in the oxygen-to-water oxidation pathway. Furthermore, Fe-SAzyme is successfully applied for efficient aflatoxin B1 removal based on its robust laccase-like catalytic activity. This work provides a strategy for the rational design of laccase-like SAzymes, and the proposed catalytic mechanism will help to understand the coordination environment effect of SAzymes on laccase-like catalytic processes.

Degradation Characteristics of Nicosulfuron in Water and Soil by MnO2 Nano-Immobilized Laccase

As a typical sulfonylurea herbicide, nicosulfuron is mainly used to control grass weeds and some broadleaf weeds in corn fields. However, as the amount of use continues to increase, it accumulates in the environment and eventually becomes harmful to the ecosystem. In the present study, a new metallic nanomaterial, δ-MnO2, was prepared, which not only has a similar catalytic mechanism as laccase but also has a significant effect on pesticide degradation. Therefore, the bicatalytic property of MnO2 can be utilized to improve the remediation of nicosulfuron contamination. Firstly, MnO2 nanomaterials were prepared by controlling the hydrothermal reaction conditions, and immobilized laccase was prepared by the adsorption method. Next, we investigate the effects of different influencing factors on the effect of immobilized laccase, MnO2, and free laccase on the degradation of nicosulfuron in water and soil. In addition, we also analyze the metabolic pathway of nicosulfuron degradation in immobilized laccase and the bicatalytic mechanism of MnO2. The results demonstrated that the degradation rate of nicosulfuron in water by immobilized laccase was 88.7%, and the optimal conditions were 50 mg/L, 25 h, 50 °C, and pH 5. For nicosulfuron in soil, the optimal conditions for the degradation by immobilized laccase were found to be 151.1 mg/kg, 46 °C, and pH 5.9; under these conditions, a degradation rate of 90.1% was attained. The findings of this study provide a theoretical reference for the immobilized laccase treatment of sulfonylurea herbicide contamination in water and soil.

Construction of Immobilized Laccase System Based on ZnO and Degradation of Mesotrione

Mesotrione (MES) is a new environmental pollutant. Some reports have indicated that microbial enzymes could be utilized for MES degradation. Laccase is a green biocatalyst whose potential use in environmental pollutant detoxification has been considered limited due to its poor stability and reusability. However, these issues may be addressed using enzyme immobilization. In the present study, we sought to optimize conditions for laccase immobilization, to analyze and characterize the characteristics of the immobilized laccase, and to compare its enzymatic properties to those of free laccase. In addition, we studied the ability of laccase to degrade MES, and analyzed the metabolic pathway of MES degradation by immobilized laccase. The results demonstrated that granular zinc oxide material (G-ZnO) was successfully used as the carrier for immobilization. G-ZnO@Lac demonstrated the highest recovery of enzyme activity and exhibited significantly improved stability compared with free laccase. Storage stability was also significantly improved, with the relative enzyme activity of G-ZnO@Lac remaining at about 54% after 28 days of storage (compared with only 12% for free laccase). The optimal conditions for the degradation of MES by G-ZnO@Lac were found to be 10 mg, 6 h, 30 °C, and pH 4; under these conditions, a degradation rate of 73.25% was attained. The findings of this study provide a theoretical reference for the laccase treatment of 4-hy-droxyphenylpyruvate dioxygenase (HPPD)-inhibiting herbicide contamination.

Thermo-Alkali-Tolerant Recombinant Laccase from Bacillus swezeyi and Its Degradation Potential against Zearalenone and Aflatoxin B1

The enzymatic biodegradation of mycotoxins in food and feed has attracted the most interest in recent years. In this paper, the laccase gene from Bacillus swezeyi was cloned and expressed in Escherichia coli BL 21(D3). The sequence analysis indicated that the gene consisted of 1533 bp. The purified B. swezeyi laccase was analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis -12% with an estimated molecular weight of 56.7 kDa. The enzyme is thermo-alkali-tolerant, displaying the optimal degradation of zearalenone (ZEN) and aflatoxin B1 (AFB1) at pH 8 and 9, with incubation temperatures of 55 and 50 °C, respectively, within 24 h. The degradation potentials of the 50 μg of the enzyme against ZEN (5.0 μg/mL) and AFB1 (2.5 μg/mL) were 99.60 and 96.73%, respectively, within 24 h. To the best of our knowledge, this is the first study revealing the recombinant production of laccase from B. swezeyi, its biochemical properties, and potential use in ZEN and AFB1 degradation in vitro and in vivo.

A complex metabolic network and its biomarkers regulate laccase production in white-rot fungus Cerrena unicolor 87613

BACKGROUND

White-rot fungi are known to naturally produce high quantities of laccase, which exhibit commendable stability and catalytic efficiency. However, their laccase production does not meet the demands for industrial-scale applications. To address this limitation, it is crucial to optimize the conditions for laccase production. However, the regulatory mechanisms underlying different conditions remain unclear. This knowledge gap hinders the cost-effective application of laccases.

RESULTS

In this study, we utilized transcriptomic and metabolomic data to investigate a promising laccase producer, Cerrena unicolor 87613, cultivated with fructose as the carbon source. Our comprehensive analysis of differentially expressed genes (DEGs) and differentially abundant metabolites (DAMs) aimed to identify changes in cellular processes that could affect laccase production. As a result, we discovered a complex metabolic network primarily involving carbon metabolism and amino acid metabolism, which exhibited contrasting changes between transcription and metabolic patterns. Within this network, we identified five biomarkers, including succinate, serine, methionine, glutamate and reduced glutathione, that played crucial roles in co-determining laccase production levels.

CONCLUSIONS

Our study proposed a complex metabolic network and identified key biomarkers that determine the production level of laccase in the commercially promising Cerrena unicolor 87613. These findings not only shed light on the regulatory mechanisms of carbon sources in laccase production, but also provide a theoretical foundation for enhancing laccase production through strategic reprogramming of metabolic pathways, especially related to the citrate cycle and specific amino acid metabolism.

Using low-shear aerated and agitated bioreactor for producing two specific laccases by trametes versicolor cultures induced by 2,5-xylidine: Process development and economic analysis

Laccase isoforms from basidiomycetes exhibit a superior redox potential compared to commercially available laccases obtained from ascomycete fungi, rendering them more reactive toward mono-substituted phenols and polyphenolic compounds. However, basidiomycetes present limitations for large-scale culture in liquid media, restraining the current availability of laccases from this fungal class. To advance laccase production from basidiomycetes, a newly designed 14-L low-shear aerated and agitated bioreactor provided enzyme titers up to 23.5 IU/mL from Trametes versicolor cultures. Produced enzymes underwent ultrafiltration and LC/MS-MS characterization, revealing the predominant production of only two out of the ten laccases predicted in the T. versicolor genome. Process simulation and economic analysis using SuperPro designer® suggested that T. versicolor laccase could be produced at US$ 3.60/kIU in a 200-L/batch enterprise with attractive economic parameters and a payback period of 1.7 years. The study indicates that new bioreactors with plain design help to produce low-cost enzymes from basidiomycetes.

Low toxicity of magnetite-based modified bionanocomposites with potential application for wastewater treatment: Evaluation in a zebrafish animal model

In recent years, the escalating concerns surrounding environmental pollution and the need for sustainable wastewater treatment solutions have underscored the significance of developing technologies that can efficiently treat wastewater while also reducing negative ecological effects. In this context, our study aims to contribute to the advancement of sustainable technologies for wastewater treatment, by investigating the effects that bare magnetite nanoparticles and those functionalized with the enzyme laccase could have in an aquatic animal, zebrafish, at various life cycle stages. Exposure to magnetite nanoparticles shows some effects on embryo hatching, survival rates, or larval behavior at higher concentrations. For both treatments, the hatching percentages were close to 80% compared to 93% for the control group. At the end of the observations in larvae, survival in all the evaluated groups was higher than 90%. Additionally, we evaluated the accumulation of nanoparticles in various stages of zebrafish. We found that, although there was accumulation during embryonic stages, it did not affect normal development or subsequent hatching. Iron levels in different organs such as gills, muscles, gastrointestinal tract, and brain were also evaluated in adults. Animals treated with a mix of food and nanoparticles at 10 μg/mL (Food group) presented a higher concentration of iron accumulation in muscle, gastrointestinal tract, and gills compared to the untreated control group. Although iron levels increased depending on the dose and exposure method applied, they were not statistically significant from the control groups. Our findings suggest that bionanocomposites evaluated here can be considered safe for removal of contaminants in wastewater without toxic effects or detrimental accumulation fish's health.

Laccase-Treated Polystyrene Surfaces with Caffeic Acid, Dopamine, and L-3,4-Dihydroxyphenylalanine Substrates Facilitate the Proliferation of Melanocytes and Embryonal Carcinoma Cells NTERA-2

This study presents the effects of treating polystyrene (PS) cell culture plastic with oxidoreductase enzyme laccase and the catechol substrates caffeic acid (CA), L-DOPA, and dopamine on the culturing of normal human epidermal melanocytes (NHEMs) and human embryonal carcinoma cells (NTERA-2). The laccase-substrate treatment improved PS hydrophilicity and roughness, increasing NHEM and NTERA-2 adherence, proliferation, and NHEM melanogenesis to a level comparable with conventional plasma treatment. Cell adherence dynamics and proliferation were evaluated. The NHEM endpoint function was quantified by measuring melanin content. PS surfaces treated with laccase and its substrates demonstrated the forming of polymer-like structures. The surface texture roughness gradient and the peak curvature were higher on PS treated with a combination of laccase and substrates than laccase alone. The number of adherent NHEM and NTERA-2 was significantly higher than on the untreated surface. The proliferation of NHEM and NTERA-2 correspondingly increased on treated surfaces. NHEM melanin content was enhanced 6-10-fold on treated surfaces. In summary, laccase- and laccase-substrate-modified PS possess improved PS surface chemistry/hydrophilicity and altered roughness compared to untreated and plasma-treated surfaces, facilitating cellular adherence, subsequent proliferation, and exertion of the melanotic phenotype. The presented technology is easy to apply and creates a promising custom-made, substrate-based, cell-type-specific platform for both 2D and 3D cell culture.

Lignocellulolytic Enzymes Production by Four Wild Filamentous Fungi for Olive Stones Valorization: Comparing Three Fermentation Regimens

Lignocellulolytic enzymes play a crucial role in efficiently converting lignocellulose into valuable platform molecules in various industries. However, they are limited by their production yields, costs, and stability. Consequently, their production by producers adapted to local environments and the choice of low-cost raw materials can address these limitations. Due to the large amounts of olive stones (OS) generated in Morocco which are still undervalued, Penicillium crustosum, Fusarium nygamai, Trichoderma capillare, and Aspergillus calidoustus, are cultivated under different fermentation techniques using this by-product as a local lignocellulosic substrate. Based on a multilevel factorial design, their potential to produce lignocellulolytic enzymes during 15 days of dark incubation was evaluated. The results revealed that P. crustosum expressed a maximum total cellulase activity of 10.9 IU/ml under sequential fermentation (SF) and 3.6 IU/ml of β-glucosidase activity under submerged fermentation (SmF). F. nygamai recorded the best laccase activity of 9 IU/ml under solid-state fermentation (SSF). Unlike T. capillare, SF was the inducive culture for the former activity with 7.6 IU/ml. A. calidoustus produced, respectively, 1,009 μg/ml of proteins and 11.5 IU/ml of endoglucanase activity as the best results achieved. Optimum cellulase production took place after the 5th day under SF, while ligninases occurred between the 9th and the 11th days under SSF. This study reports for the first time the lignocellulolytic activities of F. nygamai and A. calidoustus. Furthermore, it underlines the potential of the four fungi as biomass decomposers for environmentally-friendly applications, emphasizing the efficiency of OS as an inducing substrate for enzyme production.

Insects to the rescue? Insights into applications, mechanisms, and prospects of insect-driven remediation of organic contaminants

Traditional and emerging contaminants pose significant human and environmental health risks. Conventional physical, chemical, and bioremediation techniques have been extensively studied for contaminant remediation. However, entomo- or insect-driven remediation has received limited research and public attention. Entomo-remediation refers to the use of insects, their associated gut microbiota, and enzymes to remove or mitigate organic contaminants. This novel approach shows potential as an eco-friendly method for mitigating contaminated media. However, a comprehensive review of the status, applications, and challenges of entomo-remediation is lacking. This paper addresses this research gap by examining and discussing the evidence on entomo-remediation of various legacy and emerging organic contaminants. The results demonstrate the successful application of entomo-remediation to remove legacy organic contaminants such as persistent organic pollutants. Moreover, entomo-remediation shows promise in removing various groups of emerging contaminants, including microplastics, persistent and emerging organic micropollutants (e.g., antibiotics, pesticides), and nanomaterials. Entomo-remediation involves several insect-mediated processes, including bio-uptake, biotransfer, bioaccumulation, and biotransformation of contaminants. The mechanisms underlying the biotransformation of contaminants are complex and rely on the insect gut microbiota and associated enzymes. Notably, while insects facilitate the remediation of contaminants, they may also be exposed to the ecotoxicological effects of these substances, which is often overlooked in research. As an emerging field of research, entomo-remediation has several knowledge gaps. Therefore, this review proposes ten key research questions to guide future perspectives and advance the field. These questions address areas such as process optimization, assessment of ecotoxicological effects on insects, and evaluation of potential human exposure and health risks.

Controllable chemical redox reactions to couple microbial degradation for organic contaminated sites remediation: A review

Global environmental concern over organic contaminated sites has been progressively conspicuous during the process of urbanization and industrial restructuring. While traditional physical or chemical remediation technologies may significantly destroy the soil structure and function, coupling moderate chemical degradation with microbial remediation becomes a potential way for the green, economic, and efficient remediation of contaminated sites. Hence, this work systematically elucidates why and how to couple chemical technology with microbial remediation, mainly focused on the controllable redox reactions of organic contaminants. The rational design of materials structure, selective generation of reactive oxygen species, and estimation of degradation pathway are described for chemical oxidation. Meanwhile, current progress on efficient and selective reductions of organic contaminants (i.e., dechlorination, defluorination, -NO2 reduction) is introduced. Combined with the microbial remediation of contaminated sites, several consideration factors of how to couple chemical and microbial remediation are proposed based on both fundamental and practical points of view. This review will advance the understanding and development of chemical-microbial coupled remediation for organic contaminated sites.

Bioremediation of Hazardous Pollutants Using Enzyme-Immobilized Reactors

Bioremediation uses the degradation abilities of microorganisms and other organisms to remove harmful pollutants that pollute the natural environment, helping return it to a natural state that is free of harmful substances. Organism-derived enzymes can degrade and eliminate a variety of pollutants and transform them into non-toxic forms; as such, they are expected to be used in bioremediation. However, since enzymes are proteins, the low operational stability and catalytic efficiency of free enzyme-based degradation systems need improvement. Enzyme immobilization methods are often used to overcome these challenges. Several enzyme immobilization methods have been applied to improve operational stability and reduce remediation costs. Herein, we review recent advancements in immobilized enzymes for bioremediation and summarize the methods for preparing immobilized enzymes for use as catalysts and in pollutant degradation systems. Additionally, the advantages, limitations, and future perspectives of immobilized enzymes in bioremediation are discussed.

Identification and characterization of a fungal cutinase-like enzyme CpCut1 from Cladosporium sp. P7 for polyurethane degradation

Plastic degradation by biological systems emerges as a prospective avenue for addressing the pressing global concern of plastic waste accumulation. The intricate chemical compositions and diverse structural facets inherent to polyurethanes (PU) substantially increase the complexity associated with PU waste management. Despite the extensive research endeavors spanning over decades, most known enzymes exhibit a propensity for hydrolyzing waterborne PU dispersion (i.e., the commercial Impranil DLN-SD), with only a limited capacity for the degradation of bulky PU materials. Here, we report a novel cutinase (CpCut1) derived from Cladosporium sp. P7, which demonstrates remarkable efficiency in the degrading of various polyester-PU materials. After 12-h incubation at 55°C, CpCut1 was capable of degrading 40.5% and 20.6% of thermoplastic PU film and post-consumer foam, respectively, while achieving complete depolymerization of Impranil DLN-SD. Further analysis of the degradation intermediates suggested that the activity of CpCut1 primarily targeted the ester bonds within the PU soft segments. The versatile performance of CpCut1 against a spectrum of polyester-PU materials positions it as a promising candidate for the bio-recycling of waste plastics.IMPORTANCEPolyurethane (PU) has a complex chemical composition that frequently incorporates a variety of additives, which poses significant obstacles to biodegradability and recyclability. Recent advances have unveiled microbial degradation and enzymatic depolymerization as promising waste PU disposal strategies. In this study, we identified a gene encoding a cutinase from the PU-degrading fungus Cladosporium sp. P7, which allowed the expression, purification, and characterization of the recombinant enzyme CpCut1. Furthermore, this study identified the products derived from the CpCut1 catalyzed PU degradation and proposed its underlying mechanism. These findings highlight the potential of this newly discovered fungal cutinase as a remarkably efficient tool in the degradation of PU materials.

Thermosensitive polymer-assisted extraction and purification of fungal laccase from citrus pulp wash effluent

BACKGROUND

This study explores the use of liquid-liquid extraction with thermosensitive polymers for producing laccase (Lac) from Pleurotus sajor-caju. This process leverages liquid waste from the citrus industry, specifically pulp wash. The research delves into extractive fermentation and thermoseparation, both processes being facilitated by a polymer exhibiting a lower critical solution temperature transition.

RESULTS

Key factors considered include the choice of polymer, its concentration, pH, separation temperature, and the behavior of the polymer-rich phase post-extractive fermentation concerning the lower critical solution temperature. Notably, under conditions of 45% by weight of Pluronic L-61 and pH 5.0 at 25 °C, the Lac resulted in an enhancement in the purification factor of 28.4-fold, compared with the Lac obtained directly from the fermentation process on the eighth day. There was an 83.6% recovery of the Lac enzyme in the bottom phase of the system. Additionally, the unique properties of Pluronic L-61, which can induce phase separation and also allow for thermoseparation, led to a secondary fraction (aqueous solution) of Lac with purification factor of 2.1 ± 0.1-fold (at 32 ± 0.9 °C and 30 ± 0.3 min without stirring) from the polymeric phase (top phase). Fourier-transform infrared analysis validated the separation data, particularly highlighting the α-helix content in the amide I region (1600-1700 cm-1 ).

CONCLUSION

In summary, the insights from this study pave the way for broader industrial applications of these techniques, underscoring benefits like streamlined process integration, heightened selectivity, and superior separation efficacy. © 2023 Society of Chemical Industry.

Co-immobilizing laccase-mediator system by in-situ synthesis of MOF in PVA hydrogels for enhanced laccase stability and dye decolorization efficiency

The laccase mediator system (LMS) with a broad substrate range has attracted much attention as an efficient approach for water remediation. However, the practical application of LMS is limited due to their high solubility, poor stability and low reusability. Herein, the bimetallic Cu/ZIFs encapsulated laccase was in-situ grown in poly(vinyl alcohol) (PVA) polymer matrix. The PVA-Lac@Cu/ZIFs hydrogel was formed via one freeze-thawing cycle, and its catalytic stability was significantly improved. The mediator was further co-immobilized on the hydrogel, and this hierarchically co-immobilized ABTS/PVA-Lac@Cu/ZIFs hydrogel could avoid the continuous oxidation reaction between laccase and redox mediators. The co-immobilized LMS biocatalyst was used to degrade malachite green (MG), and the degradation rate was up to 100 % within 4 h. More importantly, the LMS could be recycled synchronously from the dye solutions and reused to degrade MG multiple times. The degradation rate remained above 69.4 % after five cycles. Furthermore, the intermediate products were detected via liquid chromatography-mass spectrometry, and the potential degradation pathways were proposed. This study demonstrated the significant potential of utilizing the MOF nanocrystals and hydrogel as a carrier for co-immobilized LMS, and the effective reuse of both laccase and mediator was promising for laccase application in wastewater treatment.

Transcriptomic and metabolomic analysis unveils a negative effect of glutathione metabolism on laccase activity in Cerrena unicolor 87613

The white rot fungus Cerrena unicolor 87613 has been previously shown to be a promising resource in laccase production, an enzyme with significant biotechnological applications. Conventional methods face technical challenges in improving laccase activity. Attempts are still being made to develop novel approaches for further enhancing laccase activity. This study aimed to understand the regulation of laccase activity in C. unicolor 87613 for a better exploration of the novel approach. Transcriptomic and metabolomic analyses were performed to identify key genes and metabolites involved in extracellular laccase activity. The findings indicated a strong correlation between the glutathione metabolism pathway and laccase activity. Subsequently, experimental verifications were conducted by manipulating the pathway using chemical approaches. The additive reduced glutathione (GSH) dose-dependently repressed laccase activity, while the GSH inhibitors (APR-246) and reactive oxygen species (ROS) inducer (H2O2) enhanced laccase activity. Changes in GSH levels could determine the intracellular redox homeostasis in interaction with ROS and partially affect the expression level of laccase genes in C. unicolor 87613 in turn. In addition, GSH synthetase was found to mediate GSH abundance in a feedback loop. This study suggests that laccase activity is negatively influenced by GSH metabolism and provides a theoretical basis for a novel strategy to enhance laccase activity by reprogramming glutathione metabolism at a specific cultivation stage.IMPORTANCEThe production of laccase activity is limited by various conventional approaches, such as heterologous expression, strain screening, and optimization of incubation conditions. There is an urgent need for a new strategy to meet industrial requirements more effectively. In this study, we conducted a comprehensive analysis of the transcriptome and metabolome of Cerrena unicolor 87613. For the first time, we discovered a negative role played by reduced glutathione (GSH) and its metabolic pathway in influencing extracellular laccase activity. Furthermore, we identified a feedback loop involving GSH, GSH synthetase gene, and GSH synthetase within this metabolic pathway. These deductions were confirmed through experimental investigations. These findings not only advanced our understanding of laccase activity regulation in its natural producer but also provide a theoretical foundation for a strategy to enhance laccase activity by reprogramming glutathione metabolism at a specific cultivation stage.

A graphitized carbon@boron carbide-mediated laccase-based amperometric biosensor for epinephrine detection

The development of novel electron transfer mediator is important for laccase-based electrochemical biosensors. Here, graphitized carbon coated boron carbide (GC@B4C) was first used as the mediator to transfer electrons from laccase (Lac) to nickel foam (NF) electrode. The GC shell of GC@B4C particles was characterized and confirmed by HRTEM, XRD and Raman spectroscopy. The fabricated Lac/GC@B4C/NF electrode was applied for amperometric detection of epinephrine (EP). Detection results indicated Lac/GC@B4C/NF electrode has wide linear range (0.1 µM-2.6 mM), low detection limit (40 nM), high sensitivity (76.05 µA mM-1), strong anti-interference ability and favorable stability for EP detection. This work opened up the use of nonmetallic carbide as the mediator for enzyme-based electrochemical biosensors.

Study on the degradation conditions of corn stalks by Asian corn borer digestive enzymes combined with white-rot fungus

Since the environmentally friendly reuse of corn stalks attracts more and more attention, it is an efficient and feasible way to reuse corn stalks as forage. However, whether the cellulose, lignin, and hemicellulose within corn stalks can be effectively decomposed becomes a key to reusing corn stalks as forage. Orthogonal test was designed by five different degradation temperatures (22°C, 24°C, 26°C, 28°C, 30°C), five different pH values (4, 5, 6, 8, 10), and five different degradation time durations (5, 15, 25, 30, and 35 days) to examine 25 kinds of different degradation conditions. It was found that the decomposition effect of hemicellulose, cellulose, and lignin, of group 25 (26°C, pH = 5, 25 days) was stronger compared with other groups, with the contents calculated as 8.22%, 31.55%, and 22.55% individually (p < 0.01, p < 0.05). Group 19 (22°C, pH = 4, 5 days) revealed the worst degradation effect of cellulose, lignin, and hemicellulose compared to other groups, with contents calculated as 15.48%, 38.85%, and 29.57%, individually (p < 0.01, p < 0.05). The research data deliver a basis for ideal degradation conditions for corn stalks degradation in combination with the digestive enzymes of P. chrysosporium and O. furnacalis larva. Aiming to explore a highly efficient and environmentally friendly corn stalk degradation method.

Spatial nanopores promote laccase degradation of bisphenol A and its analogs

Bisphenol A (BPA) and its analogs are endocrine-disrupting chemicals that are frequently detected in environmental and human samples. However, the effective removal of BPA and its analogs has not yet been extensively studied. Herein, we introduce a novel enzyme reactor for the degradation of BPA and its analogs in water. The influence of pore size on the degradation efficiency of immobilized laccase in the spatial nanopores of hydrogel was investigated using BPA as a representative compound. This showed that nanopores enhance the activity of immobilized laccases in a pore size-dependent manner and increase their stability. Compared with the same amount of free laccase, the 50 mg/L BPA degradation performance of laccase immobilized in 76 nm nanopores increased to 300 %. Taking advantage of magnetic separation, this immobilized laccase can be reused, and its degradation capacity was maintained at over 73.7 % after ten reactions. Moreover, the degradation of seven BPA analogs was 1.03-5.88 times higher using laccase immobilized in nanopores compared with free laccase. Also, the biocatalyst could efficiently degrade BPA analogs in real water matrix. This study opens up a new avenue for the removal of BPA and its analogs by immobilizing laccase in nanopores, overcoming the key limitations introduced by the short enzyme life span and non-reusability.

Enhancing the Physicochemical Attributes of Dough and Noodles through the Incorporation of Bacillus vallismortis Laccase

This investigation examined how the Bacillus vallismortis laccase (rBVL-MRL522) influenced the physicochemical characteristics, structural attributes, and functional capabilities of both dough and noodles. Incorporating rBVL-MRL522 (1 U/g) did not lead to a substantial change in the water absorption of wheat flour. However, the introduction of rBVL-MRL522 caused a significant elongation in the formation time of wheat flour dough, extending it by 88.9%, and also resulted in a 50% increase in the stabilization duration of wheat flour dough. Furthermore, adding rBVL-MRL522 led to a proportional rise in both the elastic and viscous moduli (G'' of the dough, signifying that r-BVL (rBVL-MRL522) has a beneficial effect on the gluten strength of the dough. Integrating rBVL-MRL522 promoted the consolidation of the gluten-based cross-linked structure within the dough, decreasing the size of starch particles and, more evenly, the dispersion of these starch particles. In the noodle processing, adding rBVL-MRL522 at a rate of 1 U/g raised the L* value of the noodles by 2.34 units compared to the noodles prepared without the inclusion of rBVL-MRL522. Using a greater amount of rBVL-MRL522 (2 U/g) substantially increased the hardness of the noodles by 51.31%. Additionally, rBVL-MRL522 showed a noteworthy enhancement in the elasticity, cohesiveness, and chewiness of the noodles. In conclusion, rBVL-MRL522 promoted the cross-linking gluten, leading to a more extensive and condensed three-dimensional network structure in raw and cooked noodles. As a result, this study offers valuable insights into the environmentally friendly processing of dough and associated products.

Trametes versicolor laccase activity modulated by the interaction with gold nanoparticles

In this study, the impact of gold nanoparticles (AuNPs) on the structure and activity of laccase from Trametes versicolor (Lc) was described. Fluorescence experiments revealed that AuNPs efficiently quench Lc's tryptophan fluorescence by a static and dynamic process. By using differential scanning microcalorimetry and circular dichroism spectroscopy, it was determined how the concentration of nanoparticles and the composition of the medium affected the secondary structure of Lc. The data revealed that upon binding with AuNPs, conformational changes take place mainly in presence of high amounts of nanoparticles. The complex kinetic analysis unveiled the Lc activity enhancement at low concentrations of AuNPs as opposed to the concentrated regime, where it can be reduced by up to 55%. The Michaelis-Menten tests highlighted that the activity of the biocatalyst is closely related to the concentration of AuNPs, while the Selwyn analysis demonstrated that even in a concentrated regime of Lc it is not deactivated regardless of the amount of AuNPs added. The thermal parameters improved by twofold in the presence of low AuNPs concentration, whereas the activation energy increased with AuNPs content, implying that not all collisions are beneficial to the enzyme structure. The effect of AuNPs on the decomposition of a recalcitrant dye (naphthol green B, NG) by Lc was also evaluated, and the Michaelis-Menten model revealed that only the high AuNPs content influenced negatively the Lc activity. The isothermal titration calorimetry revealed that hydrogen bonds are the main intermolecular forces between Lc and AuNPs, while electrostatic interactions are responsible for NG adsorption to AuNPs. The results of the docking analysis show the binding of NG near the copper T1 site of Lc with hydrogen bonds, electrostatic and hydrophobic interactions. The findings of this work provide important knowledge for laccase-based bio-nanoconjugates and their use in the field of environmental remediation.

Metal-Organic Framework for the Immobilization of Oxidoreductase Enzymes: Scopes and Perspectives

Oxidoreductases are a wide class of enzymes that can catalyze biological oxidation and reduction reactions. Nowadays, oxidoreductases play a vital part in most bioenergetic metabolic pathways, which have important applications in biodegradation, bioremediation, environmental applications, as well as biosensors. However, free oxidoreductases are not stable and hard to be recycled. In addition, cofactors are needed in most oxidoreductases catalyze reactions, which are so expensive and unstable that it hinders their industrial applications. Enzyme immobilization is a feasible strategy that can overcome these problems. Recently, metal-organic frameworks (MOFs) have shown great potential as support materials for immobilizing enzymes due to their unique properties, such as high surface-area-to-volume ratio, chemical stability, functional designability, and tunable pore size. This review discussed the application of MOFs and their composites as immobilized carriers of oxidoreductase, as well as the application of MOFs as catalysts and immobilized carriers in redox reactions in the perspective of the function of MOFs materials. The paper also focuses on the potential of MOF carrier-based oxidoreductase immobilization for designing an enzyme cascade reaction system.

Thermostable Bacterial Laccase: Catalytic Properties and Its Application in Biotransformation of Emerging Pollutants

Laccases have been predominantly reported in fungi, and primarily, fungal laccases are currently exploited in industrial applications. However, extremophilic bacterial laccases possess immense potential, as they can withstand extreme temperatures, pH, and salt concentrations. In addition, unlike fungal laccases, the production of bacterial laccases is cost-effective. Therefore, bacterial laccases are gaining significant attention for their large-scale applications. Previously, we reported a novel thermostable laccase (LacT) from Brevibacillus agri. Herein, we have confirmed that LacT shares a high sequence similarity with CotA laccase from Bacillus amyloliquefaciens. Peptide mass fingerprinting of LacT was conducted via matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF/MS-MS). Inductively coupled plasma-optical emission spectroscopic (ICP-OES) analysis revealed the presence of ∼3.95 copper ions per protein molecule. Moreover, the secondary and tertiary structure of LacT was studied using circular dichroism (CD) and fluorescence spectroscopy. The absence of notable shifts in CD and fluorescence spectra with an increase in temperature established that LacT remains intact even at elevated temperatures. Analysis of the thermal denaturation profile of LacT by thermogravimetric analysis (TGA) also confirmed its temperature stability. Thereafter, we exploited LacT in its application for the bioremediation of phenolic endocrine disruptors, namely, triclosan, 4,4'-dihydroxybiphenyl, and dienestrol. LacT oxidizes 4,4'-dihydroxybiphenyl and triclosan but no LacT activity was detected with dienestrol. The rate of biotransformation of 4,4'-dihydroxybiphenyl and triclosan increased in the presence of CuSO4 and a redox mediator, ABTS. Transformation of dienestrol was observed only with LacT in the presence of ABTS. This study establishes the application of LacT for the bioremediation of phenolic compounds.

Degradation of indole via a two-component indole oxygenase system from Enterococcus hirae GDIAS-5

Animal farming copiously generates indoles, which contribute to odor and pose a challenge for deodorization. While biodegradation is widely accepted, there is a lack of suitable indole-degrading bacteria for animal husbandry. In this study, we aimed to construct genetically engineered strains with indole-degrading abilities. Enterococcus hirae GDIAS-5 is a highly efficient indole-degrading bacterium, which functions via a monooxygenase YcnE presumably contributes to indole oxidation. However, the efficiency of engineered Escherichia coli expressing YcnE for indole degradation is lower than that of GDIAS-5. To improve its efficacy, the underlying indole-degradation mechanisms in GDIAS-5 were analyzed. An ido operon that responds to a two-component indole oxygenase system was identified. In vitro experiments showed that the reductase component of YcnE, YdgI, can improve the catalytic efficiency. The reconstruction of the two-component system in E. coli exhibited higher indole removal efficiency than GDIAS-5. Furthermore, isatin, the key intermediate metabolite in indole degradation, might be degraded via a novel isatin-acetaminophen-aminophenol pathway involving an amidase whose coding gene is located near the ido operon. The two-component anaerobic oxidation system, upstream degradation pathway, and engineering strains investigated in this study provide important insights into indole degradation metabolism and offer efficient resources for achieving bacterial odor elimination.

Heterologous expression, purification, and characterization of thermo- and alkali-tolerant laccase-like multicopper oxidase from Bacillus mojavensis TH309 and determination of its antibiotic removal potential

Laccases or laccase-like multicopper oxidases have great potential in bioremediation to oxidase phenolic or non-phenolic substrates. However, their inability to maintain stability in harsh environmental conditions and against non-substrate compounds is one of the main reasons for their limited use. The gene (mco) encoding multicopper oxidase from Bacillus mojavensis TH309 were cloned into pET14b( +), expressed in Escherichia coli, and purified as histidine tagged enzyme (BmLMCO). The molecular weight of the enzyme was about 60 kDa. The enzyme exhibited laccase-like activity toward 2,6-dimethoxyphenol (2,6-DMP), syringaldazine (SGZ), and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS). The highest enzyme activity was recorded at 80 °C and pH 8. BmLMCO showed a half-life of ~ 305, 99, 50, 46, 36, and 20 min at 40, 50, 60, 70, 80, and 90 °C, respectively. It retained more than 60% of its activity after pre-incubation in the range of pH 5-12 for 60 min. The enzyme activity significantly increased in the presence of 1 mM of Cu2+. Moreover, BmLMCO tolerated various chemicals and showed excellent compatibility with organic solvents. The Michaelis constant (Km) and the maximum velocity (Vmax) values of BmLMCO were 0.98 mM and 93.45 µmol/min, respectively, with 2,6-DMP as the substrate. BmLMCO reduced the antibacterial activity of cefprozil, gentamycin, and erythromycin by 72.3 ± 1.5%, 79.6 ± 6.4%, and 19.7 ± 4.1%, respectively. This is the first revealing shows the recombinant production of laccase-like multicopper oxidase from any B. mojavensis strains, its biochemical properties, and potential for use in bioremediation.

Preparation and characterization of a laccase-like enzyme from Thermomicrobium roseum

In this study, a laccase-like gene from Thermomicrobium roseum DSM 5159 (TrLac-like) (NCBI: WP_012642205.1) was recombinantly expressed in Bacillus subtilis WB600. The optimum temperature and pH for TrLac-like were 50 °C and 6.0, respectively. TrLac-like showed high tolerance to mixed systems of water and organic solvents, indicating its potential for large-scale application in various industries. It showed 36.81 % similarity with YlmD from Geobacillus stearothermophilus (PDB:6T1B) in sequence alignment; therefore, 6T1B was employed as the template for homology modeling. To improve catalytic efficiency, amino acid substitutions within 5 Å of the inosine ligand were simulated to reduce the binding energy and promote substrate affinity. Single and double substitutions (44 and 18, respectively) were prepared, and the catalytic efficiency of the mutant A248D was increased to approximately 110-fold that of the wild type, while the thermal stability was maintained. Bioinformatics analysis revealed that the significant improvement in catalytic efficiency could be attributed to the formation of new hydrogen bonds between the enzyme and substrate. With a further decrease in the binding energy, the catalytic efficiency of the multiple mutant H129N/A248D was approximately 14-fold higher than that of the wild type but lower than that of the single mutant A248D. This is possibly because k_cat also decreased with the decrease of K_m; consequently, the substrate could not be released in time owing to the enzyme with the combination mutation not being able to release the substrate at a high rate.

3D printed polylactide scaffolding for laccase immobilization to improve enzyme stability and estrogen removal from wastewater

This study reports a biocatalytic system of immobilized laccase and 3D printed open-structure biopolymer scaffoldings. The scaffoldings were computer-designed and 3D printed using polylactide (PLA) filament. The immobilization of laccase onto the 3D printed PLA scaffolds were optimized with regard to pH, enzyme concentration, and immobilization time. Laccase immobilization resulted in a small reduction in reactivity (in terms of Michaelis constant and maximum reaction rate) but led to significant improvement in chemical and thermal stability. After 20 days of storage, the immobilized and free laccase showed 80% and 35% retention of the initial enzymatic activity, respectively. The immobilized laccase on 3D printed PLA scaffolds achieved 10% improvement in the removal of estrogens from real wastewater as compared to free laccase and showed the significant reusability potential. Results here are promising but also highlight the need for further study to improve enzymatic activity and reusability.

Characterization of a New Laccase from Vibrio sp. with pH-stability, Salt-tolerance, and Decolorization Ability

Laccases have been widely used for fruit juice clarification, food modification, and paper pulp delignification. In addition, laccases exhibit remarkable performance in the degradation of toxic substances, including pesticides, organic synthetic dyes, antibiotics, and organic pollutants. Thus, the screening and development of robust laccases has attracted significant attention. In this study, Vibrio sp. LA is a strain capable of producing cold-adapted laccases. The laccase coding gene L01 was cloned from this strain and expressed in Yarrowia lipolytica, a host with good secretion ability. The secreted L01 (approximate MW of 56,000 Da) had the activity and specific activity of 18.6 U/mL and 98.6 U/mg toward ABTS, respectively. The highest activity occurred at 35 °C. At 20 °C, L01 activity was over 70% of the maximum activity in pH conditions ranging from 4.5–10.0. Several synthetic dyes were efficiently degraded by L01. Owing to its robustness, salt tolerance, and pH stability, L01 is a promising catalytic tool for potential industrial applications.