Persistent organic pollutants carried on plastic resin pellets from two beaches in China

Metabolic profile changes of zebrafish larvae in the single- and co-exposures of microplastics and phenanthrene

Microplastics (MPs) are ubiquitous in the environment, and can adsorb organic contaminants (OCs) and be taken by various microorganisms and organisms, which could eventually lead to risk to humans. In this study, the phenotypic changes and metabolic profile alternations of zebrafish in the single- and co-exposure of MPs and phenanthrene (Phe) were investigated. The results showed that significantly higher tail malformation rate and edema rate in zebrafish induced by MPs can be enhanced due to the co-existence of Phe. The metabolomic analysis revealed that both synergistic and antagonistic effects of MPs and Phe on the metabolic alternation of zebrafish larvae exist, since unique perturbations of metabolites or pathways were found in all of the three exposure scenarios. Based on Partial least squares-discriminant analysis, porphine, ribose, and L-glutamic acid were the most important metabolites resulting in the difference between the treated and control groups in the MP exposure, Phe exposure and co-exposure, respectively. Two dysregulated pathways namely d-glutamine and D-glutamate metabolism, and alanine, aspartate and glutamate metabolism were significantly affected in the co-exposure while not in either of the single exposure. These findings provide new insights into the toxic effects of MPs on aquatic organisms, and further studies on combined effects of MPs and OCs are suggested to be conducted.

Migration of natural organic matter and Pseudomonas fluorescens-associated polystyrene on natural substrates in aquatic environments

This study investigated the migration behavior of microplastics (MPs) covered with natural organic matter (NOM) and biofilm on three substrates (silica, Pseudomonas fluorescent and Pseudomonas aeruginosa biofilms) in various ionic strengths, focusing on the alterations in surface properties based on surface energy theory that affected their deposition and release processes. Peptone and Pseudomonas fluorescens were employed to generate NOM-attached and biofilm-coated polystyrene (PS) (NOM-PS and Bio-PS). NOM-PS and Bio-PS both exhibited different surface properties, as increased roughness and particle sizes, more hydrophilic surfaces and altered zeta potentials which increased with ionic strength. Although the deposition of NOM-PS on biofilms were enhanced by higher ionic strengths and the addition of Ca2+, while Bio-PS deposited less on biofilms and more on the silica surface. Both types exhibited diffusion-driven adsorption on the silica surface, with Bio-PS also engaging in synergistic and competitive interactions on biofilm surfaces. Release tests revealed that NOM-PS and Bio-PS were prone to release from silica than from biofilms. The Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory furtherly demonstrated that mid-range electrostatic (EL) repulsion had significantly impacts on NOM-PS deposition, and structural properties of extracellular polymeric substances (EPS) and substrate could affect Bio-PS migration.

Occurrence, characteristics, and risk assessment of microplastics and polycyclic aromatic hydrocarbons associated with microplastics in surface water and sediments of the Konya Closed Basin, Turkey

The presence of polycyclic hydrocarbons (PAHs) and microplastics (MPs) in aquatic environments affects the ecosystems and threatens human health. In this study, the abundance, composition, and morphological characteristics of MPs were determined for the first time in the inland freshwater resources of the Konya Closed Basin, Turkey. The abundance of MPs ranged from 1139 to 23,444 particles/m3 and 150 to 3510 particles/kg in the surface water and sediment, respectively. Fragments and fibers were the most abundant MP shapes in the surface waters (51%, 34%) and sediments (29%, 40%), followed by films, pellets, and foams. Transparent and white MPs were present at the highest percentage in surface waters (72%) and sediments (69%), followed by blue, grey, black, brown, and green. In addition, polyethylene, polypropylene, and cellophane were identified as the main polymers in surface waters (34%, 25%, 24%) and sediments (37%, 17%, 31%). In the Konya Closed Basin, 35% of the surface water samples and 54% of the sediment samples were exposed to very high contamination (CF ≥ 6). Surface waters (PLI: 2.51) and sediments (PLI: 1.67) in the basin were contaminated (PLI > 1) with MPs. The 16 PAHs sorbed on MPs in the surface water and sediment ranged from 394 to 24,754 ng/g and from 37 to 18,323 ng/g, respectively. Phenanthrene and fluoranthene were the most abundant PAHs sorbed on MPs in all surface waters and sediments. Two to three-ring PAH compounds sorbed on MPs were also dominantly detected in surface waters and sediments, accounting for 68% and 78% of the total 16 PAHs, respectively. The source of PAHs carried by MPs in the Konya Closed Basin was mainly of petrogenic origin. Incremental lifetime cancer risk (ILCR) results indicated that the maximum ILCR values were higher than the EPA acceptable level (10-6) for child (2.95 × 10-5) and adult (1.46 × 10-4), indicating a potential cancer risk.

Metabolomics combined with proteomics reveals phytotoxic effects of norfloxacin under drought stress on Oryza sativa

In recent decades, plants enduring abiotic stresses such as drought and chemical stresses. Currently, the mechanism of combined antibiotic and drought stress response and its impact on crop growth and food security remains poorly understood. Here, the mechanism of stress responses under the exposure of norfloxacin (NF) and drought (D) individually and in combination (DNF) were explored on rice (Oryza sativa) cultivar Hanyou73 through proteomics and metabolomic analysis. All treatments adversely affected chlorophyll fluorescence kinetics, antioxidant enzyme activities, rice grain composition and yield. The results showed that in DNF the antibiotic was accumulated 627% more than NF treatment in rice grains while in leaves there was no significant difference under both treatments. The proteomic revealed that differentially expressed identified proteins were involved in carbohydrate metabolism, amino acid metabolism, photosynthesis and mRNA binding. However, the metabolomics results showed that the abundance of metabolites related to RNA biosynthesis and amino acid metabolism were more affected. The disruptions caused in rice plant under DNF treatment become more severe, this makes it more susceptible than individual D and NF treatment. These findings improve our knowledge about the response of rice plant to cope with antibiotic contamination alone and in combination with drought.

Microplastic ingestion by sea turtles around Tokyo Bay: Level of water pollution influences ingestion amounts

We investigated the contents inside the esophagus and stomach of turtles inside and outside of the Tokyo Bay area, which face high and low risks of microplastic (MP) exposure, respectively. 65 synthetic particles were recovered from 8 out of 22 turtles, using ATR-FTIR followed by density separation with calcium chloride solution. Statistical analysis indicated that turtles in high-risk areas ingested significantly more MPs than those in low-risk areas. As the inflow of MPs from major rivers influences pollution levels in the ocean, the results of this study highlight the importance of major rivers for MP ingestion by turtles. Additionally, we discussed the current methodology's shortcomings and addressed scope for subsequent research, along with suggestions on future conservation.

Analysis of the Adsorption Behavior of Phenanthrene on Microplastics Based on Two-Dimensional Correlation Spectroscopy

Microplastics (MPs), an emerging pollutant, widely co-occur with polycyclic aromatic hydrocarbons (PAHs) in the environment. Therefore, the interaction between MPs and PAHs has been the focus of much attention in recent years. In this study, three types of MPs, i.e., polypropylene, polystyrene, and poly(vinyl chloride), with the same main chain were selected as the adsorbents, with phenanthrene (PHE) as the representative PAHs. The adsorption mechanisms were explored from the perspective of the molecular spectral level using a combination of Fourier transform infrared spectroscopy (FT-IR) with a two-dimensional correlation technique. The adsorption kinetics results showed that the adsorption of PHE on the three MPs was dominated by chemisorption. However, the FT-IR analysis results indicated that no new covalent bond was created during the adsorption process. Based on the above research, a generalized two-dimensional (2D) correlation spectral technique was employed to investigate the sequence of functional group changes during the adsorption process for different MPs. Furthermore, the hybrid 2D correlation spectral technique explored the effect of side groups attached to the main chain molecules of MPs on adsorption. The results showed that for all three MPs, the functional groups in the side chain have a higher affinity for PHE, which is due to their higher hydrophobicity. This study provides a feasible way to analyze the adsorption of pollutants on MPs, and the results are important for understanding the adsorption interaction between PAHs and MPs in the aquatic environment.

Microplastics in retail shellfish from a seafood market in eastern Thailand: Occurrence and risks to human food safety

This study aimed to investigate the presence of microplastics in three economically essential shellfish species: green mussels, cockles and spotted babylon. The average abundance of microplastics ranged from 2.41 to 2.84 particles/g wet weight. The predominant shape was fiber, with colors ranging from black-grey to transparent. The size of the microplastics discovered was <1.0 mm. Polystyrene and polyethylene were the most detected types in mussels and cockles, while linen was the predominant type in spotted babylon. The Thai population's estimated annual intake (EAI) of microplastics through shellfish consumption ranged from 20.23 to 1178.42 particles/person/year. The potential human health risks were evaluated using the polymer hazard index (PHI), which led to risk categories III-IV. These findings, along with others from the literature, indicate that shellfish consumption may pose risks to human health, depending on the species consumed and the origin of the specimens.

Organic pollutants adsorbed on microplastics: Potential indicators for source appointment of microplastics

Pollution by microplastics (MPs) has caused potential threats to the environment. Understanding the sources of MPs in the environment can help control their emissions and reduce environmental risks. Source apportionment of MPs has been conducted according to the characteristics of MPs themselves (such as types of polymers and morphological characteristics). However, the specificity and resolution of the appointments of sources need to be improved. Organic pollutants adsorbed on MPs can be used as a novel and reliable indicator to identify the source of MPs in the environment. In the present work, the analytical methods of MPs and organic pollutants adsorbed on MPs were critically reviewed, and the occurrence of organic pollutants and factors influencing their adsorption on MPs were discussed. Furthermore, the potential applications of organic pollutants adsorbed on MPs as indicators for determining the sources of MPs were highlighted. The study would help recognize the sources of MPs, which will support efforts aimed at reducing their emissions and further pollution of the ecosystem.

Co-exposure of microplastics and polychlorinated biphenyls strongly influenced the cycling processes of typical biogenic elements in anoxic soil

The co-exposure of microplastics (MPs) and polychlorinated biphenyls (PCBs) in soil is inevitable, but their combined effect on cycles of typical biogenic elements (e.g. C, N, Fe, S) is still unclear. And the co-exposure of MPs and PCBs caused more severe effects than single exposure to pollution. Therefore, in this study, a 255-day anaerobic incubation experiment was conducted by adding polyethylene microplastics (PE MPs, including 30 ± 10 μm and 500 μm) and PCB138. The presence of PE MPs inhibited the PCB138 degradation. Also, PE MPs addition (1%, w/w) enhanced the methanogenesis, Fe(Ⅲ) reduction, and sulfate reduction while inhibited nitrate reduction and the biodegradation of PCB138. And PCB138 addition (10 mg·kg-1) promoted the methanogenesis and Fe(Ⅲ) reduction, but inhibited sulfate reduction and nitrate reduction. Strikingly, the presence of PE MPs significantly reduced the impact of PCB138 on the soil redox processes. The abundance changes of special microbial communities, including Anaeromyxobate, Geobacter, Bacillus, Desulfitobacterium, Thermodesulfovibrio, Metanobacterium, etc., were consistent with the changes in soil redox processes, revealing that the effect of PE MPs and/or PCB138 on the cycle of typical biogenic elements was mainly achieved by altering the functional microorganisms. This study improves the knowledge of studies on the impact of MPs and combined organic pollutants to soil redox processes, which is greatly important to the stabilization and balance of biogeochemical cycling in ecology.

Commercialization potential of PET (polyethylene terephthalate) recycled nanomaterials: A review on validation parameters

Polyethylene Terephthalate (PET) is a polymer which is considered as one of the major contaminants to the environment. The PET waste materials can be recycled to produce value-added products. PET can be converted to nanoparticles, nanofibers, nanocomposites, and nano coatings. To extend the applications of PET nanomaterials, understanding its commercialization potential is important. In addition, knowledge about the factors affecting recycling of PET based nanomaterials is essential. The presented review is focused on understanding the PET commercialization aspects, keeping in mind market analysis, growth drivers, regulatory affairs, safety considerations, issues associated with scale-up, manufacturing challenges, economic viability, and cost-effectiveness. In addition, the paper elaborates the challenges associated with the use of PET based nanomaterials. These challenges include PET contamination to water, soil, sediments, and human exposure to PET nanomaterials. Moreover, the paper discusses in detail about the factors affecting PET recycling, commercialization, and circular economy with specific emphasis on life cycle assessment (LCA) of PET recycled nanomaterials.

Microplastics' toxic effects and influencing factors on microorganisms in biological wastewater treatment units

Prior to entering the water body, microplastics (MPs) are mostly collected at the sewage treatment plant and the biological treatment unit is the sewage treatment facility's central processing unit. This review aims to present a comprehensive analysis of the detrimental impacts of MPs on the biological treatment unit of a sewage treatment plant and it covers how MPs harm the effluent quality of biological treatment processes. The structure of microbial communities is altered by MPs presence and additive release, which reduces functional microbial activity. Extracellular polymers, oxidative stress, and enzyme activity are explored as micro views on the harmful mechanism of MPs on microorganisms, examining the toxicity of additives released by MPs and the harm caused to microorganisms by harmful compounds that have been adsorbed in the aqueous environment. This article offers a theoretical framework for a thorough understanding of the potential problems posed by MPs in sewage treatment plants and suggests countermeasures to mitigate those risks to the aquatic environment.

Effect of microplastics on the adherence of coexisting background organic contaminants to natural organic matter in water

Microplastics (MPs) may interact with background organic substances (including natural organic matter and organic pollutants) after entering the aquatic environment and affect their original binding. Thus, the interaction of MPs with background organic substances (i.e., humic acid (HA), polychlorinated biphenyls (PCBs), and hydroxy PCBs) were elucidated. According to the results, PCB and hydroxy PCB displayed a strong propensity to adhere to HAs in the absence of MPs. However, the PCBs and hydroxy PCBs that were initially bound to HAs shifted from HAs to MPs in the presence of MPs. Further analysis demonstrated that this transfer was dominated by van der Waals interactions, with hydrogen bond interactions as an additional driving force. Upon the interaction, large MPs-HA-PCB/ hydroxy PCB aggregates with MPs as the core and HAs as the outermost layer were formed. Significant changes in the properties of background organic matter, including the distribution of PCB/hydroxy PCB around HA, diffusion coefficient, and hydrogen bond networks in the HA-PCB/ hydroxy PCB domains, occurred during the MP-HA-PCB/hydroxy PCB interaction. These results provide molecular-level evidence that the intrusion of MPs changes the binding preference of background organic pollutants and can lead to a redistribution of background organic pollutants.

Impacts of extreme weather events on microplastic distribution in coastal environments

Microplastic pollution is a pressing environmental threat to the ecosystem, which can be influenced by varying weather factors. With arising weather extremes in recent years, it is crucial to assess the weather effects on coastal microplastic pollution. In this study, we conducted a year-long baseline survey on beach sediment and surface seawater in Hong Kong, and additional surveys after rainstorm and typhoon events. Our data reveals that microplastic abundance was 5 times higher in wet season over dry season. Yet, the seasonal variation was insignificant when considering only the baseline condition, suggesting the role of extreme weather as the main driver of the seasonal variation in microplastic distribution. Typhoons and rainstorms induced 5.1 to 36.4 times and 1.9 to 11.7 times more microplastics in beach sediment, respectively, and 3.5 to 6.0 times and 2.5 to 4.3 times more microplastics in surface seawater, respectively. The larger microplastic mass in beach sediment and the increased proportion of hard fragments under extreme weather conditions indicate the larger mobility of heavier plastic debris from a wider source. We identified positive correlations between plastic levels and multiple weather factors (including rainfall, wind and tide), suggesting the potential terrestrial inputs of microplastics via surface runoff and wind transport, and the potential redistribution of microplastics from deep to surface sediment via wave agitation. We also identified a strongly positive correlation between macro- and microplastic abundance in beach sediment, suggesting the potential plastic fragmentation under strong wave abrasion, which may intensify the coastal microplastic pollution. This study sheds light on the need for reinforced security of waste management systems to avoid terrestrial plastic inputs under extreme weather forces, as well as the timing of coastal cleanup work in terms of limiting plastic fragmentation and achieving better cleanup efficiency.

Voyaging of halogenated polycyclic aromatic hydrocarbons, an emerging group of pollutants, on micro-mesoplastics in the marine environment

The limited existing research on the accumulation of hazardous chlorinated and brominated polycyclic aromatic hydrocarbons (ClPAHs and BrPAHs) in micro-mesoplastics (mMPs) motivated this investigation. We collected mMPs from the coastal environments of Sri Lanka and Japan. Out of 75 target compounds analyzed, 61 were detected, with total parent PAH concentrations reaching 16,300 and 1770 ng/g plastic in Sri Lanka and Japan, respectively. The total parent PAH concentrations in mMPs from the southern Sri Lankan coastline were relatively higher than those from the eastern coastline. Phenanthrene and naphthalene were the dominant parent PAH congeners in most mMP samples. Chlorinated pyrenes and brominated naphthalene were predominant among halogenated PAHs. The estimated toxic equivalency quotient (TEQ) ranged from 0.67 to 1057 ng-TEQ/g plastic, with the highest levels observed in polystyrene (PS) particles from the southern Sri Lankan coast. Benzo[a]pyrene and dibenzo[a,h]anthracene exhibited elevated TEQ for parent PAHs, whereas dichloropyrene, and dibromopyrene represented the highest TEQs for ClPAHs and BrPAHs, respectively. The data evidenced that several HPAH congeners can increase the PAH-like toxicity (∼86%) in mMPs. This study provides insights into the accumulation of parent and halogenated PAHs in mMPs, highlighting their potential combined implications in marine and terrestrial ecosystems.

Fire and Oil Led to Complex Mixtures of PAHs on Burnt and Unburnt Plastic during the M/V X-Press Pearl Disaster

In May 2021, the M/V X-Press Pearl container ship burned for 2 weeks, leading to the largest maritime spill of resin pellets (nurdles). The disaster was exacerbated by the leakage of other cargo and the ship's underway fuel. This disaster affords the unique opportunity to study a time-stamped, geolocated release of plastic under real-world conditions. Field samples collected from beaches in Sri Lanka nearest to the ship comprised nurdles exposed to heat and combustion, burnt plastic pieces (pyroplastic), and oil-plastic agglomerates (petroplastic). An unresolved question is whether the 1600+ tons of spilled and recovered plastic should be considered hazardous waste. Due to the known formation and toxicity of combustion-derived polycyclic aromatic hydrocarbons (PAHs), we measured 20 parent and 21 alkylated PAHs associated with several types of spilled plastic. The maximum PAH content of the sampled pyroplastic had the greatest amount of PAHs recorded for marine plastic debris (199,000 ng/g). In contrast, the sampled unburnt white nurdles had two orders of magnitude less PAH content. The PAH composition varied between the types of spilled plastic and presented features typical of and conflicting with petrogenic and pyrogenic sources. Nevertheless, specific markers and compositional changes for burning plastics were identified, revealing that the fire was the main source of PAHs. Eight months after the spill, the PAH contents of sampled stray nurdles and pyroplastic were reduced by more than 50%. Due to their PAH content exceeding levels allowable for plastic consumer goods, classifying burnt plastic as hazardous waste may be warranted. Following a largely successful cleanup, we recommend that the Sri Lankans re-evaluate the identification, handling, and disposal of the plastic debris collected from beaches and the potential exposure of responders and the public to PAHs from handling it. The maritime disaster underscores pyroplastic as a type of plastic pollution that has yet to be fully explored, despite the pervasiveness of intentional and unintentional burning of plastic globally.

Enhancement of photodegradation of polyethylene with adsorbed polycyclic aromatic hydrocarbons under artificial sunlight irradiation

The photodegradation of plastic waste produces microplastics (MPs) in marine environments. Plastics can adsorb hydrophobic organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) and can be transported over long distances. However, the impact of adsorbed pollutants on the photodegradation remains unknown. Here, we show that adsorbed PAHs act as photocatalysts that promote the photodegradation of polyethylene. Upon light irradiation, coloration and surface degradation of the PAH-adsorbed polyethylene sheets were observed, indicating that the PAH-adsorbed polyethylene sheets are less resistant to light. Furthermore, fluorene, phenanthrene, anthracene, benzo[a]anthracene, benzo[a]pyrene, and indeno[1,2,3-cd]perylene adsorbed on polyethylene MP exhibited lower photodegradation rates than the aqueous phase. These results indicate that these PAHs can act as photocatalysts; their role of PAHs may have two adverse effects on marine environment. First, enhanced photodegradation of plastic waste increased the production of MPs. Second, the lifetime of PAHs is extended, thereby enhancing PAHs pollution in marine environments.

Microplastic-sorbed persistent organic pollutants in coastal Mediterranean Sea areas of Tunisia

Microplastics (MPs) are emerging pollutants of global concern due to their pervasiveness, high sorption ability for persistent organic pollutants (POPs) and direct and indirect toxicity to marine organisms, ecosystems, as well as humans. As one of the major coastal interfaces, beaches are considered among the most affected ecosystems by MPs pollution. The morphological characteristics of MPs (pellets and fragments) collected from four beaches along the Tunisian coast and sorbed POPs, including polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs), were investigated in this study. The results showed that the MPs varied greatly in color, polymer composition and degradation degree. The color varied from colored to transparent and the most prevalent polymer identified using Raman spectroscopy was polyethylene. Scanning electron microscope (SEM) images exhibited various surface degradation features including cavities, cracks, attached diatom remains, etc. The concentrations of Σ12PCBs over all beaches ranged from 14 to 632 ng g-1 and 26 to 112 ng g-1 in the pellets and fragments, respectively, with a notable presence and dominance of highly-chlorinated PCBs such as CB-153 and -138. Among the OCPs, γ-HCH is the only compound detected with concentrations ranging from 0.4 to 9.7 ng g-1 and 0.7 to 4.2 ng g-1 in the pellets and fragments, respectively. Our findings indicate that MPs found on the Tunisian coast may pose a chemical risk to marine organisms as the concentrations of PCBs and γ-HCH in most of the analysed samples exceeded the sediment-quality guidelines (SQG), especially the effects range medium (ERM) and the probable effects level (PEL). As the first report of its kind, the information gathered in this study can serve as the baseline and starting point for future monitoring work for Tunisia and neighbouring countries, as well as for stakeholders and coastal managers in decision-making processes.

Formation of environmentally persistent free radicals on microplastics under UV irradiations

Microplastics (MPs) are widely distributed in the environment due to breakdown of widespread plastic wastes through physicochemical and biological processes. Environmentally persistent free radicals (EPFRs) might be generated as intermediates when MPs are further fragmented and decomposed under ultraviolet (UV) radiation. Formation of EPFRs is highly depended upon the radiation energy level. This study was designed to establish the correlation between EPFRs concentrations and UV energy. Polystyrene (PS) and polyethylene (PE) were employed to investigate the generation of EPFRs under the irradiation of three ultraviolet light sources (long-wave UVA, medium-wave UVB and short-wave UVC). Electron paramagnetic resonance (EPR) spectroscopy revealed that free radical signals were detected on PS irradiated by UVC and UVB and PE irradiated by UVC, which may be due to the difference in the MPs structure and UV energy. The g-factor and ΔH_p-p of EPR suggested that three different types of EPFRs may be formed on PS while two types of EPFR may be formed on PE. Meanwhile, EPFRs were detected within shorter time under UVC radiation than UVB and UVA, indicating that UVC radiation could lead to faster generation of free radicals. Results of Fourier transform infrared spectroscopy (FTIR) and two-dimensional correlation spectroscopy revealed that tertiary alkyl radicals, peroxy radicals and tertiary alkoxy radicals were dominant in PS whereas alkoxy radicals and keto radicals for PE. The study provides insight to the mechanisms for EPFRs formation on ubiquitously found microplastic particles. Our finding is of great significance as EPFRs may not only play important roles in decomposition of MPs and abiotic reactions of MPs-bound pollutants, but also affect physicochemical properties of MPs and MPs toxicity to aquatic organisms, hence possessing broad impacts on MPs fate and transport in aquatic environmental systems.

Accumulation and release of organic pollutants by conventional and biodegradable microplastics in the marine environment

The issue of microplastic (MP) litter in the aquatic environment and its capability of accumulating and/or releasing pollutants has been brought to light in recent years. Biodegradable plastics have been proposed as one of the different solutions to decrease environmental input of discarded plastics; however, their ability to accumulate and release pollutants once in the marine environment has not been assessed yet. In this study, we compare the accumulation and the release of a wide range of compounds by biodegradable (polyhydroxyalkanoates (PHA) and polybutylene succinate (PBS)) and conventional (polyethylene (PE)) MPs following exposure to natural seawater for 64 days. We quantified polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), organophosphorus flame retardants (PFRs), phthalates, and alternative plasticizers in MPs, before and after exposure. Results indicated that PBS- and PHA-MPs accumulated the largest amount of PAHs and PFRs, respectively. Leaching of PFRs and plasticizers was observed for all polymers and was approximately twofold greater for PE- when compared to PBS- and PHA-MPs. Overall, our study suggests that biodegradable MPs may release less additives and accumulate a larger amount of contaminants from seawater compared to conventional ones: these findings may have implications on the risk assessment of biodegradable polymers for marine biota; and on potential widespread adoption of these types of plastics.

Trash to treasure: electrocatalytic upcycling of polyethylene terephthalate (PET) microplastic to value-added products by Mn0.1Ni0.9Co2O4-δ RSFs spinel

Microplastic pollution has emerged as a pressing environmental issue of global concern due to its detrimental effects on the environment and ecology. Restricted to their characters of complex composition, it is a great challenge to propose a more cost-effective approach to achieve highly selective conversion of microplastic into add-value products. Here we demonstrate an upcycling strategy for converting PET microplastics into added-value chemicals (formate, terephthalic acid and K₂SO₄). PET is initially hydrolyzed in KOH solution to produce terephthalic acid and ethylene glycol, which is subsequently used as an electrolyte to produce formate at the anode. Meanwhile, the cathode undergoes hydrogen evolution reaction to produce H₂. Preliminary techno-economic analysis suggests that this strategy has certain economic feasibility and a novel Mn_0.1Ni_0.9Co₂O_4-δ rod-shaped fiber (RSFs) catalyst we synthesized can achieve high Faradaic efficiency (> 95%) at 1.42 V vs. RHE with optimistic formate productivity. The high catalytic performance can be attributed to the doping of Mn changing the electronic structure and reducing the metal-oxygen covalency of NiCo₂O₄, reducing the lattice oxygen oxidation in spinel oxide OER electrocatalysts. This work not only put forward an electrocatalytic strategy for PET microplastic upcycling but also guides the design of electrocatalysts with excellent performance.

Organic Pollutants Associated with Plastic Debris in Marine Environment: A Systematic Review of Analytical Methods, Occurrence, and Characteristics

Plastic pollution has become one of the most serious environmental problems, and microplastics (MPs, particles < 5 mm size) may behave as a vehicle of organic pollutants, causing detrimental effects to the environment. Studies on MP-sorbed organic pollutants lack methodological standardization, resulting in a low comparability and replicability. In this work, we reviewed 40 field studies of MP-sorbed organic contaminants using PRISMA guidelines for acquiring information on sampling and analytical protocols. The papers were also scored for their reliability on the basis of 7 criteria, from 0 (minimum) to 21 (maximum). Our results showed a great heterogeneity of the methods used for the sample collection, MPs extraction, and instruments for chemicals' identification. Measures for cross-contamination control during MPs analysis were strictly applied only in 13% of the studies, indicating a need for quality control in MPs-related research. The most frequently detected MP-sorbed chemicals were polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and organochlorine pesticides (OCPs). Most of the studies showed a good reliability (>75% of the total score), with 32 papers scoring 16 or higher. On the basis of the collected information, a standardizable protocol for the detection of MPs and MP-sorbed chemicals has been suggested for improving the reliability of MPs monitoring studies.

Microplastics in water systems: A review of their impacts on the environment and their potential hazards

Microplastics, the microscopic plastics, are fragments of any type of plastic that are being produced today as plastic waste originating from anthropogenic activities. Such microplastics are discharged into the environment, and they enter back into the human body through different means. The microplastics spread in the environment due to environmental factors and the inherent properties of microplastics, such as density, hydrophobicity, and recalcitrance, and then eventually enter the water environment. In this study, to better understand the behavior of microplastics in the water environment, an extensive literature review was conducted on the occurrence of microplastics in aquatic environments categorized by seawater, wastewater, and freshwater. We summarized the abundance and distribution of microplastics in the water environment and studied the environmental factors affecting them in detail. In addition, focusing on the sampling and pretreatment processes that can limit the analysis results of microplastics, we discussed in depth the sampling methods, density separation, and organic matter digestion methods for each water environment. Finally, the potential hazards posed by the behavior of aging microplastics, such as adsorption of pollutants or ingestion by aquatic organisms, due to exposure to the environment were also investigated.

Urban pipeline rainwater runoff is an important pathway for land-based microplastics transport to inland surface water: A case study in Beijing

Microplastics (MPs) as new environmental pollutants are receiving increasing attention worldwide. Urban rainwater runoff plays an important role in facilitating the migration of land-based MPs to surface water. Previous research has focused predominantly on aquatic ecosystems, whereas research on this migration pathway and the characteristics of MPs in rainwater pipelines draining from different land-use types is still lacking. This study investigated the abundance and characteristics of MPs in rainfall and pipeline rainwater runoff from main roads, office complexes, an agricultural experiment station, and residential areas during different rainfall periods in Haidian District, Beijing, China. Microplastic abundance in pipeline rainwater runoff ranged from 1.6 to 29.6 items L^-1, of which 0.7 to 6.0 items L^-1 were derived from rainfalls, accounting for 24.0 % to 77.4 % of the total. Microplastic abundances in rainfall and pipeline rainwater runoff decreased significantly as rainfall events progressed. The proportions of MPs < 1 mm in rainfall (38.0 %) and rainwater runoff (44.5 %) were the largest. Average MPs abundance was the highest in rainwater runoff from the main road area and lowest in the office area (p < 0.05). The abundance of polyester fibers in rainwater runoff from the residential area was significantly higher than that in other areas, while the main road area had the highest abundance of films (p < 0.05). Overall, 72 % of MPs in rainfall were fibers, and most were composed of polyester, while the MPs in rainwater runoff were mainly fragments (41.2 %) and fibers (35.3 %) composed mainly of polypropylene, polyethylene, and polyester. This study shows that urban pipeline rainwater runoff is one of the main pathways for land-based MPs transport to surface waters, and provides a scientific reference for preventing and controlling MPs entering water bodies through rainwater pipelines.

From marine to freshwater environment: A review of the ecotoxicological effects of microplastics

Microplastics (MPs) have been widely detected in the world's water, which may pose a significant threat to the ecosystem as a whole and have been a subject of much attention because their presence impacts seas, lakes, rivers, and even the Polar Regions. There have been numerous studies that report direct adverse effects on marine organisms, but only a few have explored their ecological effects on freshwater organisms. In this field, there is still a lack of a systematic overview of the toxic effects and mechanisms of MPs on aquatic organisms, as well as a consistent understanding of the potential ecological consequences. This review describes the fate and impact on marine and freshwater aquatic organisms. Further, we examine the toxicology of MPs in order to uncover the relationship between aquatic organism responses to MPs and ecological disorders. In addition, an overview of the factors that may affect the toxicity effects of MPs on aquatic organisms was presented along with a brief examination of their identification and characterization. MPs were discussed in terms of their physicochemical properties in relation to their toxicological concerns regarding their bioavailability and environmental impact. This paper focuses on the progress of the toxicological studies of MPs on aquatic organisms (bacteria, algae, Daphnia, and fish, etc.) of different trophic levels, and explores its toxic mechanism, such as behavioral alternations, metabolism disorders, immune response, and poses a threat to the composition and stability of the ecosystem. We also review the main factors affecting the toxicity of MPs to aquatic organisms, including direct factors (polymer types, sizes, shapes, surface chemistry, etc.) and indirect factors (persistent organic pollutants, heavy metal ions, additives, and monomer, etc.), and the future research trends of MPs ecotoxicology are also pointed out. The findings of this study will be helpful in guiding future marine and freshwater rubbish studies and management strategies.

Total organic carbon content as an index to estimate the sorption capacity of micro- and nano-plastics for hydrophobic organic contaminants

The worldwide existing micro- and nano-plastics (MNPs) showed high sorption capacity for hydrophobic organic contaminants (HOCs), and thus leading to change of the environmental behaviors and fates of HOCs. However, there is a lack of general index for evaluating the sorption capacity of MNPs for HOCs. Herein, we investigated the sorption of chlorobenzene, naphthalene and phenanthrene to 10 MNPs of different polymer types with and without UV-aging, respectively. It was found that the sorption was well fitted by Freundlich isotherm model with coefficients R² in the range of 0.892-1.00, and aging of most MNPs resulted in decreased sorption capacity for naphthalene and phenanthrene but slightly increased sorption capacity for chlorobenzene. More importantly, for the 8 MNPs commonly present in the environment and with measured total organic carbon (TOC) covering the range of 23.0-91.9%, the logarithm sorption constant (logK_d) values of the studied HOCs positively correlated with TOC contents of MNPs, with a good determination coefficient (R²) of 0.923 for naphthalene, 0.694 for chlorobenzene, and 0.565 for phenanthrene. Our study demonstrated that the TOC content of MNPs is a good index for estimating the contribution of total MNPs to the sorption of nonpolar HOCs in the environmental media.

Spatiotemporal characterisation of microplastics in the coastal regions of Singapore

In the 21st century, plastic production continues to increase at an unprecedented rate, leading to the global issue of plastic pollution. In marine environments, a significant fraction of plastic litter are microplastics, which have a wide range of effects in marine ecosystems. Here, we examine the spatiotemporal distribution of microplastics along the Johor and Singapore Straits, at surface and at depth. Generally, more microplastics were recorded from the surface waters across both Straits. Fragments were the dominant microplastic type (70%), followed by film (25%) and fiber (5%). A total of seven colours of microplastics were identified, with clear microplastics as the most abundant (64.9%), followed by black (25.1%) and blue (5.5%). Microplastics under 500 μm in size accounted for 98.9%, followed by particles 500-1000 μm (1%) and 1-5 mm (0.1%). During the monsoon season, the abundance of microplastics across various sites were observed to be > 1.1 times when compared to the inter-monsoon period. Rainfall was a closely related to the increased microplastic abundance across various sites in the Singapore Strait. This suggests that weather variations during climate change can play critical roles in modulating microplastic availability. Beach sediments facing the Singapore Strait recorded an abundance of 13.1 particles/kg, with polypropylene fragments, polyethylene pellets and thermoplastic polyester foam identified via Fourier transform infrared spectroscopy. Hence, it is crucial to profile the spatiotemporal variation of microplastic abundance in both the surface and in the water column to gain a better understanding of the threat caused by microplastic pollution in the coastal regions of Singapore.

Effects of microplastics alone or with sorbed oil compounds from the water accommodated fraction of a North Sea crude oil on marine mussels (Mytilus galloprovincialis)

Microplastics (MPs) can adsorb persistent organic pollutants such as oil hydrocarbons and may facilitate their transfer to organisms (Trojan horse effect). The aim of this study was to examine the effects of a 21 day dietary exposure to polystyrene MPs of 4.5 μm at 1000 particles/mL, alone and with sorbed oil compounds from the water accommodated fraction (WAF) of a naphthenic North Sea crude oil at two dilutions (25 % and 100 %), on marine mussels. An additional group of mussels was exposed to 25 % WAF for comparison. PAHs were accumulated in mussels exposed to WAF but not in those exposed to MPs with sorbed oil compounds from WAF (MPs-WAF), partly due to the low concentration of PAHs in the studied crude oil. Exposure to MPs or to WAF alone altered the activity of enzymes involved in aerobic (isocitrate dehydrogenase) and biotransformation metabolism (glutathione S-transferase). Prevalence of oocyte atresia and volume density of basophilic cells were higher and absorption efficiency lower in mussels exposed to MPs and to WAF than in controls. After 21 days MPs caused DNA damage (Comet assay) in mussel hemocytes. In conclusion, a Trojan horse effect was not observed but both MPs and oil WAF caused an array of deleterious effects on marine mussels at different levels of biological organization.

Occurrence, distribution, and associated pollutants of plastic pellets (nurdles) in coastal areas of South Texas

Nurdles, also known as plastic resin pellets, are now a major source of plastic pollution on beaches globally, thus it is important to elucidate their weathering patterns and environmental fates as well as the associated pollutants. In this study we collected nurdles from 24 sites in the coastal bend region of south Texas, covering areas from the near shore railway stations to the adjacent bays and barrier islands. The morphologies of nurdles and associated pollutants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and mercury, were investigated. The results showed that the nurdles varied greatly in color, shape, polymer composition, and oxidation degree. More than 80 % of the nurdles were made with polyethylene, and the rest with polypropylene, polyester, polystyrene, polyethylene-vinyl acetate, and polyvinyl chloride based on Fourier Transform Infrared Spectroscopy (FTIR) analysis. PCBs were not detected on nurdles. PAHs and mercury on nurdles were detected at 12 % and 20 % of the sampling sites. The total concentrations of detectable PAHs ranged from 92.59 to 1787.23 ng/g-nurdle, and the detectable mercury concentrations ranged from 1.23 to 22.25 ng/g-nurdle. Although the concentrations of these pollutants were not at the acute toxic effect level, the presence of PAHs and mercury suggested the potential risk of pollutant exposure to marine organisms in ecosystems, given the fact that nurdles are persistent in the environment.

Effects of individual and combined polystyrene nanoplastics and phenanthrene on the enzymology, physiology, and transcriptome parameters of rice (Oryza sativa L.)

Owing to their wide distribution, easy production, and resistance to degradation, microplastics (MPs) represent a globally emerging group of pollutants of concern. Furthermore, their decomposition can result in the generation of nanoplastics (NPs), which cause further environmental issues. Currently, the impact of the combination of these plastics with other organic pollutants on crop growth remains poorly investigated. In this study, a hydroponic experiment was conducted for seven days to evaluate the effects of 50 nm, 50 mg/L polystyrene (PS), and 1 mg/L phenanthrene (Phe) on the growth of rice plants. The results revealed that both Phe and PS inhibited growth and improved the antioxidant potential of rice. Relative to Phe alone, exposure to a combination of PS and Phe reduced Phe accumulation in the roots and shoots by 67.73% and 36.84%, respectively, and decreased the pressure on the antioxidant system. Exposure to Phe alone destroyed the photosynthetic system of rice plant leaves, whereas a combination of PS and Phe alleviated this damage. Gene Ontology (GO) analysis of the rice transcriptomes revealed that detoxification genes and phenylalanine metabolism were suppressed under exposure to Phe, which consequently diminished the antioxidant capacity and polysaccharide synthesis in rice plants. Kyoto Encyclopaedia of Genes and Genomes (KEGG) transcriptome analysis revealed that the combined presence of both PS and Phe improved photosynthesis and energy metabolism and alleviated the toxic effects of Phe by altering the carbon fixation pathway and hormone signal transduction in rice plants. The combination of PS and Phe also prevented Phe-associated damage to rice growth. These findings improve our understanding of the effects of MP/NPs and polycyclic aromatic hydrocarbons on crops.

Metabolomic disorders unveil hepatotoxicity of environmental microplastics in wild fish Serranus scriba (Linnaeus 1758)

Coastal areas are worldwide subject to large inputs of anthropogenic wastes that are discharged directly into inshore waters, where they will be weathered into small microplastics (MPs) of up to a size <20 μm. This study provides information about the presence of small environmental MPs (≤3 μm) in the liver of adult benthopelagic fish Serranus scriba (Linnaeus 1758), caught from three coastal regions in Tunisia distinguished by different patterns of human activity. Polymer composition in fish liver was identified using Raman microspectroscopy. Results revealed differences in the abundance, size distribution and presence of plastic additives over the investigated sites. Polyethylene-vinyl acetate (PEVA: 34% particles/g of tissue), high density polyethylene (HDPE: 24.4%) and the two smaller size classes, i.e. 3-1.2 μm and 1.2-0.45 μm, were the most abundant MPs types and size distribution found, respectively, in Bizerte channel (BC) site (Bizerte city, Tunisia). Moreover, at hepatic level data showed a significant site-dependent cytotoxicity expressed by changes in malondialdehyde (MDA) content, presence of reactive oxygen species (ROS) expressed by altered level of catalase (CAT) and glutathione-S-transferase (GST) activities and in the content of metallothioneins (MTs), as well as genotoxicity by changes in the amount of micronucleus (MN), and neurotoxicity by altered activity of acetylcholinesterase (AChE). A innovative metabolomics analysis was also performed to further investigate the distinct patterns of key metabolite changes in the liver of Serranus scriba. A total of 36 metabolites were significantly affected, mainly involved in energy, amino acid and osmolyte metabolism. These findings emphasised for the first time a close relationship between the source, abundance and size ranges of environmental MPs ≤ 3 μm and their hepatotoxicity in wild organisms.

Effect of microplastics on the activity of carboxylesterase and phosphatase enzymes in Scinax squalirostris tadpoles

Microplastics (MPs) are critical emerging pollutants around the world. There is a growing interest in the effects of MP ingestion, non-digestion, and toxicity on aquatic organisms. Amphibian tadpoles are the vertebrate group that has received the least attention regarding this issue. The aim of the present study was to determine the ingestion of polyethylene MPs by Scinax squalirostris tadpoles by atomic force microscopy (AFM) and to evaluate the activities of carboxylesterase (CbE, using 4-naphthyl butyrate-NB-, and 1-naphthyl acetate -NA- as substrates) and alkaline phosphatase (ALP) under MP exposure. Enzyme activities were analyzed spectrophotometrically at 2 and 10 days of exposure. Tadpoles were exposed to two different treatments during 10 days: a negative control (CO, dechlorinated water) and MP (60 mg L^-1). AFM images of the digestive contents of tadpoles revealed the presence of MPs. After 10 days of MP exposure, CbE (NB) activity was significantly higher and CbE (NA) activity was significantly lower in MP treatments than in controls. ALP activity decreased in MP treatments after 2 and 10 days of exposure. The detection of MP particles in the intestinal contents and the effects on metabolic enzymes in a common frog species evidenced the potential health risk of MP to aquatic vertebrates. Thus, the differential response in enzymes and substrates demonstrate the need for considering the complex effects of contaminants and nutrients on ecosystems for ecotoxicological risk characterization.

Characteristics of Microplastics and Their Affiliated PAHs in Surface Water in Ho Chi Minh City, Vietnam

Microplastic pollution has become a worldwide concern. However, studies on the distribution of microplastics (MPs) from inland water to the ocean and their affiliated polycyclic aromatic hydrocarbons (PAHs) are still limited in Vietnam. In this study, we investigated the distribution of MPs and PAHs associated with MPs in canals, Saigon River, and Can Gio Sea. MPs were found at all sites, with the highest average abundance of MPs being 104.17 ± 162.44 pieces/m³ in canals, followed by 2.08 ± 2.22 pieces/m³ in the sea, and 0.60 ± 0.38 pieces/m³ in the river. Fragment, fiber, and granule were three common shapes, and each shape was dominant in one sampling area. White was the most common MP color at all sites. A total of 13 polymers and co-polymers were confirmed, and polyethylene, polypropylene, and ethylene-vinyl acetate were the three dominant polymers. The total concentration of MPs-affiliated PAHs ranged from 232.71 to 6448.66, from 30.94 to 8940.99, and from 432.95 to 3267.88 ng/g in Can Gio sea, canals, and Saigon River, respectively. Petrogenic sources were suggested as a major source of PAHs associated with MPs in Can Gio Sea, whereas those found in Saigon River and canals were from both petrogenic and pyrogenic sources.

Microplastic contamination in seafood from Dongshan Bay in southeastern China and its health risk implication for human consumption

Microplastic (MP) pollution has been a considerable concern due to its ubiquity in the environment and its potential to harm human health. Unfortunately, the exact levels of MP in various species of seafood species have not been established. It is also unclear whether or not consuming seafood contaminated with MPs directly jeopardizes human health. Here, eight popular species of seafood in Dongshan Bay, China were investigated to determine the presence of MP pollution and its implications on human health. The abundance, color, size, shape, type, surface morphology, danger of the MPs extracted from the seafood were analyzed. Results showed that the average MP abundance in the shellfish and fish was 1.88 ± 1.44 and 1.98 ± 1.98 items individual^-1, respectively. The heavy presence of fibers may be attributed to the shellfish and fish's feeding behaviors as well as their habitat and environment. The sizes of MPs found were below 1.0 mm. The main types of MP found in the shellfish were PES and PET, whereas the main types found in the fish were PS and PES. Risk assessment suggested that MPs in the shellfish (risk Level V) posed a greater and more direct threat to human health if the shellfish is eaten whole. The MPs in the gastrointestinal tracts (GITs) of fish (risk Level IV) have a relatively limited effect on human health since GITs are seldom consumed by humans unless the fish is heavily processed (canned or dried). MPs-induced health risk is predicted using a technique called molecular docking. The results of this study not only establish levels of MP pollution in popular seafood species but also help understand the implications of consuming MP-contaminated seafood on human health.

Tracing microplastics from raw water to drinking water treatment plants in Busan, South Korea

The increasing amount of plastic waste has raised concerns about microplastics (MPs) in aquatic environments. MPs can be fragmented into nanoplastics that can pass through water treatment processes and into tap water; potentially threatening human health because of their high adsorption capacity for hazardous organic materials and their intrinsic toxicity. This case study investigates the identification, fate, and removal efficiency of MPs in Korean drinking water treatment plants. Two sites on the Nakdong River, two lake reservoirs (raw water sources), and four corresponding drinking water treatment plants were targeted to trace the amounts, types, and sizes of MPs throughout the treatment process. Monthly quantitative and qualitative analyses were conducted by chemical image mapping using micro-Fourier-transform infrared spectroscopy. MPs larger than 20 μm were detected, and their sizes and types were quantified using siMPle software. Overall, the number of MPs in the river sites (January to April and October to November) exceeded those in the reservoirs, but only slight differences in the number of MPs between rivers and lake reservoirs were detected from June to October. The annual average number of MPs in River A, B and Lack C and D was not distinctively different (2.65, 2.48, 2.46 and 1.87 particles/L, respectively). The majority of MPs found in raw waters were polyethylene (PE)/polypropylene (PP) (> 60%) and polyethylene terephthalate (PET)/poly(methyl methacrylate) (PMMA) (20%), in addition to polyamide (<10%) in the river and polystyrene (<10%) in the lake reservoirs. Approximately 70-80% of the MPs were removed by pre-ozonation/sedimentation; 81-88% of PE/PP was removed by this process. PET/PMMA was removed by filtration. Correlation of MPs with water quality parameters showed that the Mn concentration was moderately correlated with the MP abundance in rivers and lake reservoirs, excluding the lake with the lowest Mn concentration, while the total organic carbon was negatively correlated with the MP abundance in both rivers (A and B) and lake reservoir C.

Distribution Characteristics and Source Analysis of Microplastics in Urban Freshwater Lakes: A Case Study in Songshan Lake of Dongguan, China

Current studies on microplastic pollution mainly focus on marine systems. However, few studies have investigated microplastics in an urban lake. This research intends to use an urban lake (Songshan Lake) as an example to explore the pollution characteristics of microplastics and use the principal component as well as the heat map analysis to discuss the relationships between different shapes of microplastics. According to this study, the average abundance of microplastics in the surface water and surface sediments of Songshan Lake were, respectively, 2.29 ± 0.98 items/m3 and 244 ± 121 items/kg; thin films were the major microplastics in both media; transparent this type of color has the most microplastic content. The particle size of microplastics was mainly 0.18–0.6 mm (43.3%) in surface water and 1–2 mm (48.3%) in surface sediments. The composition included five polymers: polyethylene (PE), polypropylene (PP), polypropylene–polyethylene copolymer (PP–PE copolymer), polystyrene (PS), and polyvinyl chloride (PVC), among which PE (47%) and PP (36%) were the main components. Principal component analysis (PCA) showed that there was a positive correlation among the four shapes of microplastics: films, fragments, foams, and fibers. The heat map analysis showed that the same category of shape distribution features may be similar for each sampling site.

Microplastic-associated pathogens and antimicrobial resistance in environment

The ubiquitous use of microplastics and their release into the environment especially the water bodies by anthropogenic/industrial activities are the major resources for microplastic contamination. The widespread and often injudicious use of antimicrobial drugs or antibiotics in various sectors including human health and hygiene, agriculture, animal husbandry and food industries are leading to the release of antibiotics into the wastewater/sewage and other water bodies, particularly in urban setups and thus leads to the antimicrobial resistance (AMR) in the microbes. Microplastics are emerging as the hubs as well as effective carriers of these microbial pathogens beside their AMR-genes (ARGs) in marine, freshwater, sewage/wastewater, and urban river ecosystems. These drug resistant bacteria interact with microplastics forming synthetic plastispheres, the ideal niche for biofilm formations which in turn facilitates the transfer of ARGs via horizontal gene transfer and further escalates the occurrence and levels of AMR. Microplastic-associated AMR is an emerging threat for human health and healthcare besides being a challenge for the research community for effective management/address of this menace. In this review, we encompass the increasing prevalence of microplastics in environment, emphasizing mainly on water environments, how they act as centers and vectors of microbial pathogens with their associated bacterial assemblage compositions and ultimately lead to AMR. It further discusses the mechanistic insights on how microplastics act as hosts of biofilms (creating the plastisphere). We have also presented the modern toolbox used for microplastic-biofilm analyses. A review on potential strategies for addressing microplastic-associated AMR is given with recent success stories, challenges and future prospects.

Combined effects of polystyrene microplastics and copper on antioxidant capacity, immune response and intestinal microbiota of Nile tilapia (Oreochromis niloticus)

Microplastics (MPs) coexist with other pollutants (such as heavy metals) in water, adversely impacting aquatic organisms, which might cause unpredictable ecological risks. This study aims to evaluate the effect of copper (Cu²⁺) and polystyrene microplastics (PS-MPs) on antioxidant capacity, immune response and intestinal microbiota of Nile tilapia. Cu²⁺ and PS-MPs co-exposure enhanced Cu²⁺ bioaccumulation in the liver of fish compared with Cu²⁺-alone exposure. Fish exposed to PS-MPs and Cu²⁺ displayed histopathologic alterations in the liver, intestine and gill. Exposure at low concentrations of Cu²⁺ in the C0 and CP0 groups can improve antioxidant capacity and immune response, while oxidative damage and inflammation existed in the high concentration of Cu²⁺ groups. Intestinal microbiota results showed that the diversity and structure were changed by Cu²⁺ and PS-MPs exposure, and harmful bacterium even increased at high concentration of Cu²⁺ and PS-MPs exposure groups. All in all, PS-MPs aggravate the accumulation of Cu²⁺ and lead to perturbations in biological systems of Nile tilapia.

Particles rather than released Zn2+ from ZnO nanoparticles aggravate microplastics toxicity in early stages of exposed zebrafish and their unexposed offspring

Knowledge on the interaction between microplastics (MPs) and zinc oxide nanoparticles (ZnO NPs) is limited. Here, we investigated effects of embryo-larvae exposure to 500 μg/L polystyrene MPs (5 µm), 1200 μg/L ZnO NPs (< 100 nm), 500 μg/L dissolved Zn²⁺ from ZnSO4^, and the mixtures of MPs and ZnO NPs or ZnSO4 on exposed F0 larvae and unexposed F1 larvae. Consequently, ZnO particles adhered to MPs surfaces rather than Zn²⁺, and increased Zn transport into larvae. Growth inhibition, oxidative stress, apoptosis, and disturbance of growth hormone and insulin-like growth factor (GH/IGF) axis were induced by MPs and ZnO NPs alone, which were further aggravated by their co-exposure in F0 larvae. MPs + ZnO increased apoptotic cells in the gill and esophagus compared with MPs and ZnO NPs alone. Reduced growth and antioxidant capacity and down-regulated GH/IGF axis were merely observed in F1 larvae from F0 parents exposed to MPs + ZnO. Contrary to ZnO NPs, dissolved Zn²⁺ reversed MPs toxicity, suggesting the protective role of Zn²⁺ may be not enough to ameliorate thfie negative effects of ZnO particles. To summarize, we found that particles rather than released Zn²⁺ from ZnO nanoparticles amplified MPs toxicity in early stages of exposed zebrafish and their unexposed offspring.

Microplastics increase the accumulation of phenanthrene in the ovaries of marine medaka (Oryzias melastigma) and its transgenerational toxicity

Microplastics (MPs) are considered to exacerbate the impacts of hydrophobic organic pollutants on aquatic organisms through the carrier function, but whether MPs affect the transgenerational toxicity of pollutants is unclear. This study exposed adult female marine medaka to phenanthrene (Phe)-adsorbed MPs for 60 days to investigate the effects of MPs on the bioaccumulation, reproductive and transgenerational toxicity of Phe. Compared to Phe alone, co-exposure to Phe and 200 μg/L MPs significantly increased Phe bioaccumulation in the intestines and ovaries. Phe alone and Phe combined with MPs disrupted the regulation of the hypothalamus-pituitary-gonadal axis, and reduced vitellogenin levels and reproductive capacity of female fish. In particular, co-exposure to 200 μg/L MPs and Phe increased the rate of follicular atresia, inhibited ovarian maturity, and aggravated reproductive toxicity. Notably, maternal uptake of Phe could be transferred to the offspring, and embryonic accumulation increased with the concentrations of MPs. Moreover, MPs aggravated Phe-induced bradycardia in embryos, suggesting that MPs exacerbated the transgenerational toxicity of Phe. These findings reveal that the growing number of MPs in the ocean might amplify the adverse effects of organic pollutants on the health and population stability of marine fishes, and this problem merits more attention.

Occurrence, toxicity and remediation of polyethylene terephthalate plastics. A review

Polyethylene terephthalate is a common plastic in many products such as viscose rayon for clothing, and packaging material in the food and beverage industries. Polyethylene terephthalate has beneficial properties such as light weight, high tensile strength, transparency and gas barrier. Nonetheless, there is actually increasing concern about plastic pollution and toxicity. Here we review the properties, occurrence, toxicity, remediation and analysis of polyethylene terephthalate as macroplastic, mesoplastic, microplastic and nanoplastic. Polyethylene terephthalate occurs in groundwater, drinking water, soils and sediments. Plastic uptake by humans induces diseases such as reducing migration and proliferation of human mesenchymal stem cells of bone marrow and endothelial progenitor cells. Polyethylene terephthalate can be degraded by physical, chemical and biological methods.

Microplastics pollution in the ocean: Potential carrier of resistant bacteria and resistance genes

Microplastics pollution in marine environments is concerning. Microplastics persist and accumulate in various sections of the ocean where they present opportunity for micropollutant accumulation and microbial colonisation. Even though biofilm formation on plastics was first reported in the 1970's, it is only in recent years were plastic associated biofilms have gained research attention. Plastic surfaces pose a problem as they are a niche ready for colonisation by diverse biofilm assemblages, composed of specific bacterial communities and putative pathogens prone to acquiring ARGs and resistance in the biofilm. However, the nature of antibiotic resistance on aquatic plastic debris is not yet fully understood and remains a concern. Given the inevitable increase of plastic production and waste generation, microplastics released into the environment may prove to be problematic. This review explores microplastic waste in the ocean and possible concerns that may arise from the presence of microplastics in conjunction with favourable conditions for the development and dispersal of antibiotic resistance in the ocean and food web.

Interaction of Microplastics with Antibiotics in Aquatic Environment: Distribution, Adsorption, and Toxicity

As two major types of pollutants of emerging concerns, microplastics (MPs) and antibiotics (ATs) coexist in aquatic environments, and their interactions are a source of increasing concern. Therefore, this work examines the interaction mechanisms of MPs and ATs, and the effect of MPs on ATs bioavailability and antibiotic resistance genes (ARGs) abundance in aquatic environments. First, the mechanisms for ATs adsorption on MPs are summarized, mainly including hydrophobic, hydrogen-bonding, and electrostatic interactions. But other possible mechanisms, such as halogen bonding, CH/π interaction, cation-π interaction, and negative charge-assisted hydrogen bonds, are newly proposed to explain the observed ATs adsorption. Additionally, environmental factors (such as pH, ionic strength, dissolved organic matters, minerals, and aging conditions) affecting ATs adsorption by MPs are specifically discussed. Moreover, MPs could change the bioaccumulation and toxicity of ATs to aquatic organisms, and the related mechanisms on the joint effect are reviewed and analyzed. Furthermore, MPs can enrich ARGs from the surrounding environment, and the effect of MPs on ARGs abundance is evaluated. Finally, research challenges and perspectives for MPs-ATs interactions and related environmental implications are presented. This review will facilitate a better understanding of the environmental fate and risk of both MPs and ATs.

Interactions and effects of microplastics with heavy metals in aquatic and terrestrial environments

Contamination of waters and soils with microplastics (MPs) is an emerging environmental issue worldwide. MPs constitute a cocktail of various additives and polymers besides adsorbing toxic heavy metals from the environment. This co-occurrence of MPs with heavy metals poses a threat to the health of organisms and is poorly understood. Ingestion of MPs contaminated with heavy metals may also result in subsequent transfer of heavy metals up in the food chain. MPs surfaces play a crucial role in the adsorption of heavy metals. Aged/biofouled MPs facilitate greater adsorption of metals and certain microplastic (MP) polymers adsorb some metals more specifically. External factors involved in the process of adsorption/accumulation of heavy metals are the solution pH, salinity, and the concentration of relevant heavy metals in the media. Desorption greatly depends upon pH of the external solution. This is more concerning as the guts/digestive systems of organisms have low pH which could enhance the desorption of toxic metals and making them accumulate in their bodies. The aim of this article is to discuss the abundance, distribution, adsorption, and desorption behavior of MPs for heavy metals, and their combined toxic effects on flora and fauna based on the limited research on this topic in the literature. There is an overarching need to understand the interactions of MPs with heavy metals in different ecosystems so that the extent of ecotoxic effects they pose could be assessed which would help in the environmental regulation of these pollutants.

Battling the known unknowns: a synoptic review of aquatic plastics research from Australia, the United Kingdom and China

Plastic pollution is a global environmental and human health issue, with plastics now ubiquitous in the environment and biota. Despite extensive international research, key knowledge gaps ("known unknowns") remain around ecosystem-scale and human health impacts of plastics in the environment, particularly in limnetic, coastal and marine systems. Here we review aquatic plastics research in three contrasting geographic and cultural settings, selected to present a gradient of heavily urbanised (and high population density) to less urbanised (and low population density) areas: China, the United Kingdom (UK), and Australia. Research from each country has varying environmental focus (for example, biota-focussed studies in Australia target various bird, fish, turtle and seal species, while UK and China-based studies focus on commercially important organisms such as bivalves, fish and decapods), and uses varying methods and reporting units (e.g. mean, median or range). This has resulted in aquatic plastics datasets that are hard to compare directly, supporting the need to converge on standardised sampling methods, and bioindicator species. While all the study nations show plastics contamination, often at high levels, datasets are variable and do not clearly demonstrate pollution gradients.

Environmental profile, distributions and potential sources of halogenated polycyclic aromatic hydrocarbons

Halogenated polycyclic aromatic hydrocarbons (HPAHs) are high lipophilic and degradation-resistant, which have been detected in the air, water, sediment and biota. HPAHs tend to have strong adverse effects on animals and humans. Although we have realized HPAHs are emerging contaminants which needs to be paid attention, there is still a lack of their individual commercial standards. This makes it difficult for understanding HPAHs comprehensively. This review is devoted to collect all the results have reported, and give a systemic look of their global distributions, influence factors and sources. Compared with air, studies on other environmental matrices (water and sediment) are more limited. The researches on organisms are fewest. Comparing the studied congeners, there are more studies on ClPAHs than BrPAHs. Human activities contribute mostly to their occurrence. Further, we then also introduce the toxicity and analytical methods to better understand HPAHs. The future research directions are also provided. Through this review, we can conclude there is an urgent need to develop analysis methods and ecologic risk assessment for better exploring HPAHs. Effective methods should be done to control HPAHs. Therefore, this review can provide a good basis for researchers to understand and control global pollution.

Characteristics, fate, and impact of marine plastic debris exposed to sunlight: A review

The increase of plastic production from the middle of the twentieth century was inevitably followed by an increase in the amount of plastic dumped in the natural environment. There, the plastic debris are exposed to sunlight, temperature, humidity, and physical stress. This can induce photo-oxidative and thermal degradation. This review discusses the mechanism of plastics UV weathering and its characteristics. Comparison of the photodegradation rate and physico-chemical properties are made according to the weathering mode (natural/accelerated) and medium (air/water). Since the photodegradation can lead to plastics fragmentation, this phenomenon is described along with the methodologies used in literature to evaluate the fragmentation. The impact of the photodegraded plastic debris on the marine environment is also presented in term of (i) photodegradation products and stabilizers leakage, (ii) organic pollutants accumulation, transfer, and leakage, and (iii) toxicity on marine organisms.

Time to Safeguard the Future Generations from the Omnipresent Microplastics

Microplastics (MPs) as a ubiquitous environmental pollutant have drawn growing attention, and it is concerning that children are more sensitive to MPs than adults. Unfortunately, information about the link between children and MPs is insufficient. Therefore, we review the sources and exposure routes of children to MPs and collect evidence for the potential risks. Children can ingest and/or inhale MPs derived from various foodstuffs and plastic products. Despite the limited knowledge on the toxicity to humans, current studies have proved the accumulation and translocation of MPs in different tissues and organs. Main damages including cytotoxicity, neurotoxicity, and immunotoxicity can be caused by pristine polymers and/or co-contaminants. There is much more to be understood about MPs, especially their health effects, and this study has made it clear that it is time to protect our future generations from the threat of MPs.

Contamination knows no borders: Toxic organic compounds pollute plastics in the biodiversity hotspot of Revillagigedo Archipelago National Park, Mexico

Plastic pollution is ubiquitous and not even remote protected islands are safe from it. Floating debris can adsorb toxic compounds that concentrate on their surface, being available to the animals that ingest them. For this reason, a baseline study of plastic pollution was conducted in the remote Revillagigedo Archipelago, in the Mexican Pacific Ocean. In 47 manta net samples an average of 4.8 plastics/1000m² was found, 73% of the pieces being <5 mm. Polyethylene and polypropylene were the most common polymers found. The chemical analysis of organic pollutants revealed that organochlorine pesticides, polycyclic aromatic hydrocarbons and polychlorinated biphenyls are adsorbed on the plastics collected in the area. Filter feeding megafauna such as humpback whales, manta rays and whale sharks could ingest contaminated micro and macroplastics. Plastics were found also on the beach, where they are available to the ingestion by terrestrial animals, including endemic species endangered to extinction.

The impacts of weathering on concentration and bioaccessibility of organic pollutants associated with plastic pellets (nurdles) in coastal environments

Nurdles, the pre-production plastic pellets, are a major source of plastic pollution in marine environments due to unregulated spills during production and transportation. We analyzed the types of plastics and associated organic pollutants on nurdles collected along the shoreline of Gulf of Mexico in Texas. Our results showed that the nurdles were made from polyethylene (81.9%) and polypropylene (18.1%). Polycyclic aromatic hydrocarbons (PAHs, 16 US EPA priority) and polychlorinated biphenyls (PCBs, 7 commercial congeners) sorbed to the nurdles were in concentration ranges of 1.6-14,700 ng/ g and 0-642 ng/ g, respectively. Heavily weathered nurdles tended to have higher concentrations of PAHs and PCBs than lightly weathered ones. The bioaccessibility of sorbed contaminants was evaluated using a simulated intestinal fluid. The results showed that the associated PAHs were more bioaccessible in lightly weathered nurdles (13.1 ± 2.3%) than heavily weathered one (5.3 ± 0.1%), and that no PCBs were bioaccessible. These findings are informative for toxicity evaluation and resource management of plastic debris in coastal environments.

Chronic feeding exposure to virgin and spiked microplastics disrupts essential biological functions in teleost fish

Toxicity of polyethylene (PE) and polyvinyl chloride (PVC) microplastics (MPs), either virgin or spiked with chemicals, was evaluated in two short-lived fish using a freshwater species, zebrafish, and a marine species, marine medaka. Exposures were performed through diet using environmentally relevant concentrations of MPs over 4 months. No modification of classical biomarkers, lipid peroxidation, genotoxicity or F0 behaviour was observed. A significant decrease in growth was reported after at least two months of exposure. This decrease was similar between species, independent from the type of MPs polymer and the presence or not of spiked chemicals, but was much stronger in females. The reproduction was evaluated and it revealed a significant decrease in the reproductive output for both species and in far more serious numbers in medaka. PVC appeared more reprotoxic than PE as were MPs spiked with PFOS and benzophenone-3 compared to MPs spiked with benzo[a]pyrene. Further, PVC-benzophenone-3 produced behavioural disruption in offspring larvae. These results obtained with two species representing different aquatic environments suggest that microplastics exert toxic effects, slightly different according to polymers and the presence or not of sorbed chemicals, which may lead in all cases to serious ecological disruptions.