Halloysite nanotubes and halloysite-based composites for environmental and biomedical applications

An ammonia-sensitive fluorescence sensor based on polyvinyl alcohol-graphene quantum dots/halloysite nanotubes hybrid film for monitoring fish freshness

A fluorescent hybrid film composed of nitrogen-doped graphene quantum dots (N-GQDs) loaded on halloysite nanotubes (HNTs) (N-GQDs/HNTs nanocomposite) as a sensitive element and polyvinyl alcohol (PVA) as a film-forming matrix was designed for freshness detection. The PVA-N-GQDs/HNTs hybrid film exhibited significantly enhanced fluorescence attributed to the loading of N-GQDs onto the surface of HNTs through electrostatic interactions and hydrogen bonding, effectively reducing their aggregation. The fluorescence of the hybrid film could be quenched by ammonia via photoinduced electron transfer (PET), with good linearity in the range of 20 ppm to 500 ppm ammonia and a limit of detection (LOD) of 0.63 ppm. In addition, the hybrid film was applied to monitor the freshness of seawater fish and freshwater fish stored at refrigeration and room temperature to evaluate the practicality of this approach. The developed hybrid film showed promise for nondestructive and on-site monitoring of fish spoilage.

The Effect of Silanized Halloysite Nanotubes on the Structure of Polyethylene-Based Composite

Chemical modification of the surface of halloysite nanotubes (HNT) by alkalization (with sodium hydroxide (NaOH)) and grafting with silanes (bis(trimethylsilyl)amine (HMDS)) was carried out. The efficiency of the alkalization and grafting process was evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and the nitrogen adsorption method were used. XRD and FTIR analysis confirmed the formation of bonds of trimethylsilyl groups to the HNT surface which changed the nature of the surface from hydrophilic to hydrophobic. In addition, it was noted that grafting with silanes decreases by 7.2% the specific surface area of the halloysite compared to the alkalized material. High-density polyethylene (HDPE) composites with halloysite (HNT), alkalized halloysite (alk-HNT), and HMDS-modified halloysite (m-HNT) were processed in the molten state in a Brabender mixer chamber. On SEM/EDS micrographs of HDPE composites with silanized HNT, a change in surface characteristics from smooth to ductile was observed. Higher melting point values based on differential scanning calorimetry (DSC) analysis of HDPE composites with 5%wt silanized halloysite in comparison with HNT and alk-HNT of, respectively, 2.2% and 1.4% were found, which indicates a slight beneficial influence of the filler on the quality of ordering of the crystalline phase of the matrix.

Targeted Clindamycin Delivery Systems: Promising Options for Preventing and Treating Bacterial Infections Using Biomaterials

Targeted therapy represents a real opportunity to improve the health and lives of patients. Developments in this field are confirmed by the fact that the global market for drug carriers was worth nearly $40 million in 2022. For this reason, materials engineering and the development of new drug carrier compositions for targeted therapy has become a key area of research in pharmaceutical drug delivery in recent years. Ceramics, polymers, and metals, as well as composites, are of great interest, as when they are appropriately processed or combined with each other, it is possible to obtain biomaterials for hard tissues, soft tissues, and skin applications. After appropriate modification, these materials can release the drug directly at the site requiring a therapeutic effect. This brief literature review characterizes routes of drug delivery into the body and discusses biomaterials from different groups, options for their modification with clindamycin, an antibiotic used for infections caused by aerobic and anaerobic Gram-positive bacteria, and different methods for the final processing of carriers. Examples of coating materials for skin wound healing, acne therapy, and bone tissue fillers are given. Furthermore, the reasons why the use of antibiotic therapy is crucial for a smooth and successful recovery and the risks of bacterial infections are explained. It was demonstrated that there is no single proven delivery scheme, and that the drug can be successfully released from different carriers depending on the destination.

Formation and Application of Polymer Spherulite-like Patterns of Halloysite Nanotubes by Evaporation-Induced Self-Assembly

Halloysite nanotubes (HNTs) are one-dimensional clay nanomaterials featuring distinct tubular structures and unique surface charges. HNTs can readily form ordered assembly structures under specific conditions, which shows significant potential applications in optical and biological fields. In this study, sodium hexametaphosphate (SHMP) was employed as a stabilizer to prepare polymer spherulite-like patterns via the evaporation-induced self-assembly (EISA) technique. The incorporation of SHMP enhanced the repulsion force among the nanotubes and the surface potential, which facilitated the orderly deposition of HNTs. The influence of HNT concentration, SHMP concentration, drying temperature, and substrate on the polymer spherulites-like pattern has been investigated in detail. The optimal conditions were 10 wt % HNT dispersion, 0.6 wt % SHMP concentration, 30 °C as drying temperature, and glass substrates. In addition, by changing the droplet volume and shape of the three-phase contact line, patterns of different sizes and shapes can be achieved. Bovine serum albumin or metal salt compounds were incorporated into the dispersion of SHMP-modified HNTs, which altered the charge and the self-assembled patterns with different area ratios. Thus, this technology can be utilized for the analysis and comparison of protein and metal ion concentration accurately. This study creates the correlation between the structural parameters and the preparation process involved in creating polymer spherulite-like patterns of modified HNTs and offers fresh insights into potential applications for the self-assembly of HNT droplets in the realms of anticounterfeiting and solution concentration analysis.

Recent advances in the application of clay-containing hydrogels for hemostasis and wound healing

INTRODUCTION

Immediate control of bleeding and anti-infection play important roles in wound management. Multiple organ dysfunction syndrome and death may occur if persistent bleeding, hemodynamic instability, and hypoxemia are not addressed. The combination of clay and hydrogel provides a new outlet for wound hemostasis. In this review, the current research progress of hydrogel/clay composite hemostatic agents was reviewed.

AREAS COVERED

This paper summarizes the characteristics of several kinds of clay including kaolinite, montmorillonite, laponite, sepiolite, and palygorskite. The advantages and disadvantages of its application in hemostasis were also summarized. Future directions for the application of hydrogel/clay composite hemostatic agents are presented.

EXPERT OPINION

Clay can activate the endogenous hemostatic pathway by increasing blood cell concentration and promoting plasma absorption to accelerate the hemostasis. Clay is antimicrobial due to the slow release of metal ions and has a rich surface charge with a high affinity for proteins and cells to promote tissue repair. Hydrogels have some properties such as good biocompatibility, strong adhesion, high stretchability, and good self-healing. Despite promising advances, hydrogel/clay composite hemostasis remains a limitation. Therefore, more evidence is needed to further elucidate the risk factors and therapeutic effects of hydrogel/clay in hemostasis and wound healing.

Sustainable organosolv-lignin coated nanosilver-halloysites reinforced poly (vinyl alcohol) nanocomposites for wound healing application

This study involves the fabrication of innovative poly (vinyl alcohol) nanocomposite films by incorporating silver-embedded clay nanotubes with organosolv-lignin by the solution casting approach. The confirmation of this procedure was achieved through the utilisation of many techniques, including FTIR, PXRD, FE-SEM, and TGA. The aforementioned research have verified the adherence of silver nanoparticles to the surface of raw halloysites. The confirmation of lignin functionalization on these nanotubes has been established. This novel nanofiller was used to make a range of nanocomposite films with varying weight percentages ranging from 0 wt% to 5 wt%. With the increase in the wt% of nanofillers, These nanocomposite films exhibited greater thermal and mechanical stability compared to plain PVA. An investigation was conducted to examine the impact of the films on the cellular behaviour of murine fibroblast (NIH3T3) cell lines. Based on the findings from cell proliferation and scratch testing, it has been determined that these nanocomposite films are not harmful to cells, exhibit a greater rate of cell multiplication (116 ± 1.19), and demonstrate increased migratory capabilities (86.5 ± 0.50). Further investigations of human blood corroborate the evidence that these films are compatible with blood. Nanocomposite films have the potential to serve as wound healers following pre-clinical and clinical testing.

Augmentin loaded functionalized halloysite nanotubes: A sustainable emerging nanocarriers for biomedical applications

Clay minerals such as Halloysite nanotubes (HNTs), abundantly available green nanomaterial, exhibit a significant advantage in biomedical applications such as drug delivery, antibacterial and antimicrobials, tissue engineering or regeneration, etc. Because of the mesoporous structure and high absorbability, HNTs exhibit great potential as a nanocarrier in drug delivery applications. The sulfuric acid treatment enhances the surface area of the HNTs and thereby improves their drug-loading capacity by enlarging their lumen space/inner diameter. In the present investigation, based on the literature that supports the efficacy of drug loading after acid treatment, a dual treatment was performed to functionalize the HNTs surface. First, the HNTs were etched and functionalized using sulfuric acid. The acid-functionalized HNTs underwent another treatment using (3-aminopropyl) triethoxysilane (APTES) to better interact the drug molecules with the HNTs surfaces for efficient drug loading. Augmentin, a potential drug molecule of the penicillin group, was used for HNTs loading, and their antibacterial properties, cytotoxicity, and cumulative drug release (%) were evaluated. Different characterization techniques, such as X-ray diffractometer (XRD) and Fourier Transform Infra-Red (FT-IR), confirm the loading of Augmentin to the APTES@Acid HNTs. TEM images confirm the effective loading of the drug molecule with the HNTs. The drug encapsulation efficiency shows 40.89%, as confirmed by the Thermogravimetric Analysis (TGA). Also, the Augmentin-loaded APTES@Acid HNTs exhibited good antibacterial properties against E. coli and S. aureus and low cytotoxicity, as confirmed by the MTT assay. The drug release studies confirmed the sustainable release of Augmentin from the APTES@Acid HNTs. Hence, the treated HNTs can be considered as a potential nanocarrier for effectively delivering Augmentin and promoting enhanced therapeutic benefits.

Quantifying nematic order in the evaporation-driven self-assembly of halloysite nanotubes: nematic islands and the critical aspect ratio

Halloysite nanotubes (HNTs) are naturally occurring clay minerals found in the Earth's crust that typically exist in the form of high aspect-ratio nanometer-long rods. Here, we investigate the evaporation-driven self-assembly process of HNTs and show that a highly polydisperse collection of HNTs self-sort into a spatially inhomogeneous structure, displaying a systematic variation in the resulting nematic order. Through detailed quantification using the nematic order parameter S and nematic correlation functions, we show the existence of well-defined isotropic-nematic transitions in the emerging structures. We also show that the onset of these transitions gives rise to the formation of nematic islands, a phase resembling ordered nematic domains surrounded by an isotropic phase, which grow in size with S. Detailed image analysis indicates a strong correlation between local S and the local aspect ratio, L/D, with nematic order possible only for rods with L/D ≥ 6.5 ± 1. Finally, we conclude that the observed phenomena directly result from aspect ratio-based sorting in our system. Altogether, our results provide a unique method of tuning the local microscopic structure in self-assembled HNTs using L/D as an external parameter.

Activation of persulfate by heterogeneous nano zero-valent iron/halloysite nanotubes: reaction behavior, mechanism, and implication for tetracycline hydrochloride degradation

A novel composite (nZVI/HNTs) was prepared via incorporating nano zero-valent iron (nZVI) on halloysite nanotubes (HNTs) for degrading tetracycline hydrochloride (TCH) with existence of persulfate (PS). The adsorption process of nZVI/HNTs to TCH conformed to the Freundlich isotherm model and pseudo-second-order kinetic model, and its maximum adsorption capacity was 76.62 mg·g-1. Furthermore, the nZVI/HNTs + PS system exhibited satisfactory degradation efficiency (84.21%) for TCH, and stable nZVI/HNTs (Fe leaching < 0.001 mg·L-1) could be reused. When nZVI/HNTs dosage, PS dosage and temperature increased, TCH degradation could be enhanced. After four cycling, nZVI/HNTs + PS system had still 65.8% degradation for TCH. The quenching tests and EPR analysis evidenced that SO4•- was predominant instead of •OH in such system. Three possible pathways of TCH degradation were provided through the liquid chromatograph-mass spectrometer (LC-MS) determination. Meanwhile, the biological toxicity prediction analysis indicated that the nZVI/HNTs + PS system would be an environment friendly treatment method toward TCH pollution.

ZnO/Graphene Oxide on Halloysite Nanotubes as a Superabsorbent Nanocomposite Photocatalyst for the Degradation of Organic Dyes

Using renewable photocatalysts for pollutant degradation represents a promising approach to addressing environmental water challenges by harnessing solar energy without additional energy consumption. However, for the practical use of photocatalysts, it is necessary to improve catalyst efficiency, considering cost and biocompatibility. In this study, we developed a new superabsorbent photocatalyst for the degradation of organic dyes in water. Our photocatalyst comprises halloysite nanotubes (HNTs) with a large outer diameter and Si-O and Al-O groups on the outer and inner surfaces, respectively; graphene oxide (GO) possessing numerous sp2 bonds and light-conductive properties; and ZnO, which can degrade organic molecules via a photon source. By exploiting the superabsorbent properties of GOs for organic dyes and stabilizing ZnO nanoparticles on HNTs to inhibit aggregation, our photocatalysts demonstrated significantly improved degradability compared to ZnO nanoparticles alone and combinations of ZnO with HNTs or GO. The structural characteristics of the nanocomposites were characterized using SEM, EDX, Raman spectroscopy, and XRD. Their enhanced photocatalytic activity was demonstrated by the degradation of rhodamine b in water, showing 95% photodegradation under UV illumination for 60 min, while the ZnO nanoparticles showed only 56% dye degradation under the same condition. Additionally, the degradation rate was enhanced by four times. Furthermore, the catalysts maintained their initial activity with no significant loss after four uses, showing their potential for practical implementation in the mass purification of wastewater.

Halloysite-TiO2 Nanocomposites for Water Treatment: A Review

Halloysite nanotubes (HNTs) are clay minerals with a tubular structure that can be used for many different applications in place of carbon nanotubes. Indeed, HNTs display low/non-toxicity, are biocompatible, and can be easily prepared. Moreover, the aluminum and silica groups present on HNTs' inner and outer surfaces facilitate the interaction with various functional agents, such as alkalis, organosilanes, polymers, surfactants, and nanomaterials. This allows the deposition of different materials, for instance, metal and non-metal oxides, on different substrate types. This review article first briefly presents HNTs' general structure and the various applications described in the last 20 years (e.g., drug delivery, medical implants, and energy storage). Then, it discusses in detail HNT applications for water purification (inorganic and organic pollutants). It focuses particularly on HNT-TiO₂ composites that are considered very promising photocatalysts due to their high specific surface area and adsorption capacity, large pore volume, good stability, and mechanical features.

Halloysite nanotube/black phosphorene nanohybrid modified screen-printed carbon electrode as an ultra-portable electrochemical sensing platform for smartphone-capable detection of maleic hydrazide with machine learning assistance

With the assistance of machine learning (ML), black phosphorene (BP) stabilized by silver nanoparticles (AgNPs) is used to modify halloysite nanotube (HNT) to obtain highly conductive nanomaterials, HNT/BP-AgNPs, which are morphologically characterized and elementally analyzed. Artificial neural network (ANN) and least squares support vector machine (LS-SVM) are adopted for the intelligent and rapid analysis of maleic hydrazide (MH). An ultra-portable electrochemical sensor bases on HNT/BP-AgNPs modifying screen-printed carbon electrode (SPCE), smartphone and mini-palm potentiostat for detection of MH in the linear range 0.7-55 μM with limit of detection (LOD) of 0.3 μM. For comparison, a traditional electrochemical sensor is fabricated by glass carbon electrode (GCE), desktop computer and large electrochemical potentiostat, and the linear range is 0.3-600 μM with low LOD of 0.1 μM. The ultra-portable electrochemical sensor combined with ML for the detection of MH in sweat potato and carrot gain satisfactory recoveries.

Incorporation of sodium alginate functionalized halloysite nanofillers into poly (vinyl alcohol) to study mechanical, cyto/heme compatibility and wound healing application

In this study, the Halloysite nanotubes (HNTs) are surface-functionalized with sodium alginate (Sod.alg) and poly (vinyl alcohol) (PVA) were employed to generate nanocomposite films (Sod.alg-rHNT/PVA). These nanocomposite films were made via the solution casting technique. FE-SEM data verified sod.alg-rHNT dispersion into the PVA matrix. The modifications were confirmed from FTIR, TGA and PXRD techniques. In the mechanical studies of synthesized nanocomposite films, the films showed a considerable increase in the tensile strength and Young's modulus values. The nanocomposite film's ability to induce cell proliferation and migration was investigated using murine fibroblast (NIH3T3) cells. The films increased cellular proliferation (128 ± 1.07 %) compared to the neat PVA. Cell adhesion tests showed cytocompliant films. In the scratch assay, the 5 wt% film elicited wound closure at a faster rate (91.53 ± 1.04 %). Films were compatible with human blood cells. Therefore the prepared nanocomposite films can be used as promising wound healers after pre-clinical and clinical testing.

Sustainable Secondary-Raw Materials, Natural Substances and Eco-Friendly Nanomaterial-Based Approaches for Improved Surface Performances: An Overview of What They Are and How They Work

To meet modern society’s requirements for sustainability and environmental protection, innovative and smart surface coatings are continually being developed to improve or impart surface functional qualities and protective features. These needs regard numerous different sectors, such as cultural heritage, building, naval, automotive, environmental remediation and textiles. In this regard, researchers and nanotechnology are therefore mostly devoted to the development of new and smart nanostructured finishings and coatings featuring different implemented properties, such as anti-vegetative or antibacterial, hydrophobic, anti-stain, fire retardant, controlled release of drugs, detection of molecules and mechanical resistance. A variety of chemical synthesis techniques are usually employed to obtain novel nanostructured materials based on the use of an appropriate polymeric matrix in combination with either functional doping molecules or blended polymers, as well as multicomponent functional precursors and nanofillers. Further efforts are being made, as described in this review, to carry out green and eco-friendly synthetic protocols, such as sol–gel synthesis, starting from bio-based, natural or waste substances, in order to produce more sustainable (multi)functional hybrid or nanocomposite coatings, with a focus on their life cycle in accordance with the circular economy principles.

New insights in polydopamine formation via surface adsorption

Polydopamine is a biomimetic self-adherent polymer, which can be easily deposited on a wide variety of materials. Despite the rapidly increasing interest in polydopamine-based coatings, the polymerization mechanism and the key intermediate species formed during the deposition process are still controversial. Herein, we report a systematic investigation of polydopamine formation on halloysite nanotubes; the negative charge and high surface area of halloysite nanotubes favour the capture of intermediates that are involved in polydopamine formation and decelerate the kinetics of the process, to unravel the various polymerization steps. Data from X-ray photoelectron and solid-state nuclear magnetic resonance spectroscopies demonstrate that in the initial stage of polydopamine deposition, oxidative coupling reaction of the dopaminechrome molecules is the main reaction pathway that leads to formation of polycatecholamine oligomers as an intermediate and the post cyclization of the linear oligomers occurs subsequently. Furthermore, TRIS molecules are incorporated into the initially formed oligomers.

Temperature-responsive and biocompatible nanocarriers based on clay nanotubes for controlled anti-cancer drug release

Administration of temperature-responsive drug carriers that release anticancer drugs at high temperatures can benefit hyperthermia therapies because of the synergistic effect of anticancer drug molecules and high temperature on killing the cancer cells. In this study, we design and characterize a new temperature-responsive nanocarrier based on a naturally occurring and biocompatible clay mineral, halloysite nanotubes. Poly(N-isopropylacrylamide) brushes were grown on the surface of halloysite nanotubes using a combination of mussel-inspired dopamine polymerization and surface-initiated atom transfer radical polymerization. The chemical structure of the hybrid materials was investigated using X-ray photoelectron spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The hybrid material was shown to have a phase transition temperature of about 32 °C, corresponding to a 40 nm thick polymer layer surrounding the nanotubes. Cell studies suggested that grafting of poly(N-isopropylacrylamide) brushes on the polydopamine-modified halloysite nanotubes suppresses the cytotoxicity caused by the polydopamine interlayer and drug release studies on nanotubes loaded with doxorubicin showed that thanks to the poly(N-isopropylacrylamide) brushes a temperature-dependent drug release is observed. Finally, a fluorescent dye molecule was covalently attached to the polymer-grafted nanotubes and stimulated emission depletion nanoscopy was used to confirm the internalization of the nanotubes in HeLa cells.

Enhanced nitrate and cadmium removal performance at low carbon to nitrogen ratio through immobilized redox mediator granules and functional strains in a bioreactor

The coexistence of multiple pollutants and lack of carbon sources are challenges for the biological treatment of wastewater. To achieve simultaneous removal of nitrate (NO₃^--N) and cadmium (Cd²⁺) at low carbon to nitrogen (C/N) ratios, 2-hydroxy-1,4-naphthoquinone (HNQ) was selected from three redox mediators as an accelerator for denitrification of heterotrophic strain Pseudomonas stutzeri sp. GF2 and autotrophic strain Zoogloea sp. FY6. Then, halloysite nanotubes immobilized with 2-hydroxy-1,4-naphthoquinone (HNTs-HNQ) were prepared and a bioreactor was constructed with immobilized redox mediator granules (IRMG) as the carrier, which was immobilized with HNTs-HNQ and inoculated with the two strains. The immobilized HNQ and the inoculated strains jointly improved the removal ability of NO₃^--N and Cd²⁺ and the removal efficiency of NO₃^--N (25.0 mg L^-1) and Cd²⁺ (5.0 mg L^-1) were 92.81% and 93.94% at C/N = 1.5 and hydraulic retention time (HRT) = 4 h. The Cd²⁺ was removed by adsorption of iron oxides (FeO(OH) and Fe₃O₄) and IRMG. The electron transport system activity (ETSA) of bacteria was improved and the composition of dissolved organic matter in the effluent was not affected by HNQ. The HNQ promoted the production of FeO(OH) and up-regulated the proportion of Zoogloea (54.75% in the microbial community), indicating that Zoogloea sp. FY6 was dominant in the microbial community. In addition, HNQ influenced the metabolic pathways and improved the relative abundance of some genes involved in nitrogen metabolism and the iron redox cycle.

Nanotechnology for research and treatment of the intestine

The establishment of intestinal in vitro models is crucial for elucidating intestinal cell-microbe intrinsic connections and interaction mechanisms to advance normalized intestinal diagnosis and precision therapy. This review discusses the application of nanomaterials in mucosal therapy and mechanism research in combination with the study of nanoscaffold in vitro models of the gut. By reviewing the original properties of nanomaterials synthesized by different physicochemical principles and modifying the original properties, the contribution of nanomaterials to solving the problems of short survival period, low cell differentiation rate, and poor reduction ability in traditional intestinal models is explored. According to nanomaterials’ different diagnostic mediators and therapeutic targets, the current diagnostic principles in inflammatory bowel disease, intestinal cancer, and other diseases are summarized inductively. In addition, the mechanism of action of nanomedicines in repairing mucosa, inhibiting inflammation, and alleviating the disease process is also discussed. Through such systematic elaboration, it offers a basis for nanomaterials to help advance in vitro research on the intestine and provide precision treatments in the clinic.

Natural halloysite nanotubes as an efficient catalyst in strecker reaction: the synthesis of α-amino nitriles under solvent-free conditions

In this work, a green and cost-effective method based on halloysite as natural catalyst for the synthesis of α-amino nitriles via Strecker three-component reaction is introduced. The chemical and physical structure of natural halloysite has characterized thoroughly, and then the effect of different parameters such as the amount of catalyst, solvent, and temperature was optimized in the synthesis of 2-phenyl-2-(phenylamino)acetonitrile as the model reaction. Then, various substituted benzaldehydes and anilines were converted to the desired α-amino nitriles under the optimized conditions. Electronic properties of substituents on aldehydes and aromatic amines have been affected the reaction efficiency. For all substrates, good to excellent yields of the corresponding α-amino nitriles were obtained under solvent-free conditions at room temperature. The catalyst has been recovered and reused five times in successive Strecker reaction.

AFM Characterization of Halloysite Clay Nanocomposites' Superficial Properties: Current State-of-the-Art and Perspectives

Natural halloysite clay nanotubes (HNTs) are versatile inorganic reinforcing materials for creating hybrid composites. Upon doping HNTs with polymers, coating, or loading them with bioactive molecules, the production of novel nanocomposites is possible, having specific features for several applications. To investigate HNTs composites nanostructures, AFM is a very powerful tool since it allows for performing nano-topographic and morpho-mechanical measurements in any environment (air or liquid) without treatment of samples, like electron microscopes require. In this review, we aimed to provide an overview of recent AFM investigations of HNTs and HNT nanocomposites for unveiling hidden characteristics inside them envisaging future perspectives for AFM as a smart device in nanomaterials characterization.

Surface tuned polyethersulfone membrane using an iron oxide functionalized halloysite nanocomposite for enhanced humic acid removal

Nanomodification of ultrafiltration (UF) membranes has been shown to be a simple and efficient technique for the preparation of high-performance membranes. In this work, an iron oxide functionalized halloysite nanoclay (Fe-HNC) nanocomposite was prepared and used as a nanofiller for polyethersulfone (PES) membranes. The effect of Fe-HNC concentration on the filtration performance of the membrane was investigated by varying the nanocomposite dosage (0-0.5 wt %) in the casting dope. Various characterization studies showed that the incorporation of Fe-HNC nanocomposites improved the membrane morphology and enhanced the surface properties, thermal stability, mechanical strength, hydrophilicity, and porosity. The permeability to pure water and filtration of humic acid (HA) were significantly improved by incorporating Fe-HNC into the PES membranes. The membrane with Fe-HNC loading of 0.1 wt % exhibited the highest pure water permeability (174.3 L/(m² h bar)) and removal of HA (90.1 %), which were 1.8 times and 29 % higher, respectively than the pristine PES membrane. Moreover, fouling studies showed the enhanced antifouling ability of the Fe-HNC nanocomposites modified PES membranes, especially against irreversible fouling. Continuous membrane regeneration-based fouling removal studies from HA showed that the PES/0.1 wt % Fe-HNC membrane exhibited a high fouling recovery of 70.4 % with very low reversible and irreversible fouling resistance of 9.61 % and 14.78 %, respectively, compared to the pristine PES membrane (fouling recovery: 40.4 %; reversible fouling: 21.7 %; irreversible fouling: 20.1 %). Overall, the Fe-HNC nanocomposite proved to be an effective nanomodifier for improving the permeability of PES membranes and the antifouling ability to treat HA polluted aqueous streams.

A review on the application of nanoporous zeolite for sanitary landfill leachate treatment

This review deals with low-cost nanoporous zeolites for the treatment of sanitary landfill leachate. Organic contaminants and ammoniacal nitrogen are significant parameters in landfill leachate treatment. Adsorption processes are regarded as promising alternative treatment options in this respect. Zeolites are aluminosilicate materials that are widely used in separation, filtration, adsorption and catalysis. Natural zeolite is a low-cost and readily available form of zeolite and is a promising candidate to be used as an ion-exchange material for ammonia and other inorganic pollutant removal from landfill leachate. In this review, adsorption isotherms and kinetic models in batch systems are evaluated and adsorption design parameters of the fixed-bed system are presented. Studies on ammonia removal from landfill leachate via zeolites have been thoroughly investigated. Leachate treatment systems combined with zeolites are presented. Cost of zeolites are also reported in comparison with other adsorbents. The investigated studies demonstrate that activated zeolite can improve the removal of chemical oxygen demand, NH₃-N and colour significantly compared to the case where raw zeolite is used. Moreover, the composite of activated carbon and zeolite is also favorable for ammonia removal according to reported findings, where best adsorptive removal is attained on the composite media (24.39 mg/g).

Preparation and Property of Bio-Polyimide/Halloysite Nanocomposite Based on 2,5-Furandicarboxylic Acid

Bio-based polyimide (PI)/halloysite nanotube (HNT) nanocomposites based on 2,5-furandicarboxylic acid were prepared by in situ polymerization. The pristine HNTs were modified by tetraethoxysilane (TEOS) and 4,4′-oxybisbenzenamine (ODA). The bio-based PI/HNT nanocomposite film exhibited lower moisture absorption than pure bio-based polyimide, showing that the water resistance of the bio-based polyimide film was improved. The thermal stability and glass transition temperature (Tg) of PI/HNTs nanocomposites were improved with the addition of modified HNTs. Both the tensile strength and Young’s modulus of bio-based PI/HNTs nanocomposite films were enhanced. A 37.7% increase in tensile strength and a 75.1% increase in Young’s modulus of bio-based PI/HNTs nanocomposite films, with 1 wt% of the modified HNTs, were achieved. The result confirmed that 2,5-furandicarboxylic acid could replace the oil-based material effectively, thus reducing pollution and protecting the environment. Finally, a preparation mechanism to prepare bio-based PI/HNTs nanocomposite is proposed.

Performance evaluation of nanotubular halloysites from weathered pegmatites in removing heavy metals from water through novel artificial intelligence-based models and human-based optimization algorithm

The efforts of this study aimed to evaluate the feasibility of the nanotubular halloysites in weathered pegmatites (NaHWP) for removing heavy metals (i.e., Cd²⁺, Pb²⁺) from water. Furthermore, two novel intelligent models, such as teaching-learning-based optimization (TLBO)-artificial neural network (ANN), and TLBO-support vector regression (SVR), named as TLBO-ANN and TLBO-SVR models, respectively, were proposed to predict the Cd²⁺ and Pb²⁺ absorption efficiencies from water using the NaHWP absorbent. Databases used, including 53 experiments for Pb²⁺ absorption and 56 experiments for Cd²⁺ absorption from water, under the catalysis of different conditions, such as initial concentration of Pb²⁺ and Cd²⁺, solution pH, adsorbent weight, and contact time. Subsequently, the TLBO-ANN and TLBO-SVR models were developed and applied to predict the efficiencies of Cd²⁺ and Pb²⁺ absorption from water, aiming to evaluate the role as well as the effects of different conditions on the absorption efficiencies using the NaHWP absorbent. The standalone ANN and SVM models were also taken into consideration and compared with the proposed hybrid models (i.e., TLBO-ANN and TLBO-SVR). The results showed that the NaHWP detected in a Kaolin mine (Vietnam) with 70% nanotubular halloysites is a potential adsorbent for water treatment to eliminate heavy metals from water. The two novel hybrid models proposed, i.e., TLBO-ANN and TLBO-SVR, also yielded the dominant performances and accuracies in predicting the Cd²⁺ and Pb²⁺ absorption efficiencies from water, i.e., RMSE = 1.190 and 1.102, R² = 0.951 and 0.957, VAF = 94.436 and 95.028 for the TLBO-ANN and TLBO-SVR models, respectively, in predicting the Pb²⁺ absorption efficiency from water; RMSE = 3.084 and 3.442, R² = 0.971 and 0.965, VAF = 96.499 and 96.415 for the TLBO-ANN and TLBO-SVR models, respectively, in predicting the Cd²⁺ absorption efficiency from water. Furthermore, the validation results also demonstrated these findings in practice through 23 experiments with the accuracies of 98.3% and 98.37% for the TLBO-ANN and TLBO-SVR models, respectively, in predicting the Pb²⁺ absorption efficiency from water; the accuracies of 98.3% and 97.46% for the TLBO-ANN and TLBO-SVR models, respectively, in predicting the Cd²⁺ absorption efficiency from water. Besides, solution pH was evaluated as the most critical parameter that can be adjusted to enhance the performance of the absorption of the heavy metals in this study. By using the NaHWP absorbent and the novel proposed intelligent models developed, heavy metals can be eliminated entirely from water, providing pure water/clean freshwater without any risk of adverse health effects for the short term or long term.

Hemostatic Electrospun Nanocomposite Containing Poly(lactic acid)/Halloysite Nanotube Functionalized by Poly(amidoamine) Dendrimer for Wound Healing Application: In Vitro and In Vivo Assays

The main challenge in treating injuries is excessive bleeding whereas intervention is required if the body's hemostatic systems fail to control the bleeding. Herein, a novel nanocomposite consisting of poly(lactic acid) (PLA) and poly(amidoamine) (PAMAM) dendrimer functionalized halloysite nanotube (HNT) with a highly porous structure via electrospinning is developed. HNT is functionalized by PAMAM via divergent synthetic routes from zero to third-generation numbers. The effect of different percentages and generation numbers of PAMAM dendrimer (G1, G2, and G3) functionalized HNT on PLA is studied using physicochemical nanocomposite characteristics. These resultant nanocomposites provide a nanofibrous structure with appropriate physicochemical characteristics such as mechanical properties, surface wettability, and water permeability. The hemostatic assays indicate that nanocomposite with PAMAM G3 functionalized HNT have the quickest blood clotting time due to the abundant amino functional group. Furthermore, the nanocomposites with 10 wt% of nanoparticles significantly promote cellular behavior in vitro. The in vivo study demonstrates that PLA/PAMAM G3 functionalized HNT promotes angiogenesis, collagen deposition, and re-epithelialization in the wound sites of the rat model, as well as inhibiting inflammatory response. The findings indicate that nanofibrous structure and the presence of dendrimer functionalized HNT have a synergetic effect on the enhanced nanocomposite wound healing performance.

Chondroitin Sulfate-Based Cryogels for Biomedical Applications

Cryogels attained from natural materials offer exceptional properties in applications such as tissue engineering. Moreover, Halloysite Nanotubes (HNT) at 1:0.5 weight ratio were embedded into CS cryogels to render additional biomedical properties. The hemolysis index of CS cryogel and CS:HNT cryogels was calculated as 0.77 ± 0.41 and 0.81 ± 0.24 and defined as non-hemolytic materials. However, the blood coagulation indices of CS cryogel and CS:HNT cryogels were determined as 76 ± 2% and 68 ± 3%, suggesting a mild blood clotting capability. The maximum% swelling capacity of CS cryogel was measured as 3587 ± 186%, 4014 ± 184%, and 3984 ± 113%, at pH 1.0, pH 7.4 and pH 9.0, respectively, which were reduced to 1961 ± 288%, 2816 ± 192, 2405 ± 73%, respectively, for CS:HNT cryogel. It was found that CS cryogels can hydrolytically be degraded 41 ± 1% (by wt) in 16-day incubation, whereas the CS:HNT cryogels degraded by 30 ± 1 wt %. There is no chelation for HNT and 67.5 ± 1% Cu(II) chelation for linear CS was measured. On the other hand, the CS cryogel and CS:HNT cryogel revealed Cu(II) chelating capabilities of 60.1 ± 12.5%, and 43.2 ± 17.5%, respectively, from 0.1 mg/mL Cu(II) ion stock solution. Additionally, at 0.5 mg/mL CS, CS:HNT, and HNT, the Fe(II) chelation capacity of 99.7 ± 0.6, 86.2 ± 4.7% and only 11.9 ± 4.5% were measured, respectively, while no Fe(II) was chelated by linear CS chelated Fe(II). As the adjustable and controllable swelling properties of cryogels are important parameters in biomedical applications, the swelling properties of CS cryogels, at different solution pHs, e.g., at the solution pHs of 1.0, 7.4 and 9.0, were measured as 3587 ± 186%, 4014 ± 184%, and 3984 ± 113%, respectively, and the maximum selling% values of CS:HNT cryogels were determined as 1961 ± 288%, 2816 ± 192, 2405 ± 73%, respectively, at the same conditions. Alpha glucosidase enzyme interactions were investigated and found that CS-based cryogels can stimulate this enzyme at any CS formulation.

Plasmonic photothermal release of docetaxel by gold nanoparticles incorporated onto halloysite nanotubes with conjugated 2D8-E3 antibodies for selective cancer therapy

BACKGROUND

Applied nanomaterials in targeted drug delivery have received increased attention due to tangible advantages, including enhanced cell adhesion and internalization, controlled targeted release, convenient detection in the body, enhanced biodegradation, etc. Furthermore, conjugation of the biologically active ingredients with the drug-containing nanocarriers (nanobioconjugates) has realized impressive opportunities in targeted therapy. Among diverse nanostructures, halloysite nanotubes (NHTs) with a rolled multilayer structure offer great possibilities for drug encapsulation and controlled release. The presence of a strong hydrogen bond network between the rolled HNT layers enables the controlled release of the encapsulated drug molecules through the modulation of hydrogen bonding either in acidic conditions or at higher temperatures. The latter can be conveniently achieved through the photothermal effect via the incorporation of plasmonic nanoparticles.

RESULTS

The developed nanotherapeutic integrated natural halloysite nanotubes (HNTs) as a carrier; gold nanoparticles (AuNPs) for selective release; docetaxel (DTX) as a cytotoxic anticancer agent; human IgG1 sortilin 2D8-E3 monoclonal antibody (SORT) for selective targeting; and 3-chloropropyltrimethoxysilane as a linker for antibody attachment that also enhances the hydrophobicity of DTX@HNT/Au-SORT and minimizes DTX leaching in body's internal environment. HNTs efficiently store DTX at room temperature and release it at higher temperatures via disruption of interlayer hydrogen bonding. The role of the physical expansion and disruption of the interlayer hydrogen bonding in HNTs for the controlled DTX release has been studied by dynamic light scattering (DLS), electron microscopy (EM), and differential scanning calorimetry (DSC) at different pH conditions. HNT interlayer bond disruption has been confirmed to take place at a much lower temperature (44 °C) at low pH vs. 88 °C, at neutral pH thus enabling the effective drug release by DTX@HNT/Au-SORT through plasmonic photothermal therapy (PPTT) by light interaction with localized plasmon resonance (LSPR) of AuNPs incorporated into the HNT pores.

CONCLUSIONS

Selective ovarian tumor targeting was accomplished, demonstrating practical efficiency of the designed nanocomposite therapeutic, DTX@HNT/Au-SORT. The antitumor activity of DTX@HNT/Au-SORT (apoptosis of 90 ± 0.3%) was confirmed by in vitro experiments using a caov-4 (ATCC HTB76) cell line (sortilin expression > 70%) that was successfully targeted by the sortilin 2D8-E3 mAb, tagged on the DTX@HNT/Au.

Preparation and Properties of the Urea-Formaldehyde Res-In/Reactive Halloysite Nanocomposites Adhesive with Low-Formaldehyde Emission and Good Water Resistance

Low-cost urea formaldehyde resin (UF)/reactive halloysite nanotubes (HNTs) nanocomposite adhesive was prepared successfully via in situ polymerization. The HNTs were modified to improve its compatibility with polymer. The XRD and FTIR results showed that physical and chemical interaction between the HNTs and polymer resin influenced the structure of UF owing to the functional groups on the HNTs. It is found from SEM images that the modified HNTs could be dispersed uniformly in the resin and the nanocomposite particles were spherical. The performance experiment confirmed that thermal stability of nanocomposite increased largely, formaldehyde emission of UF wood adhesive reduced 62%, and water resistance of UF wood adhesive improved by 84%. Meanwhile, the content of HNTs on the nanocomposites could be up to 60 wt %. The mechanism of the nanocomposites based on the reactive HNTs was proposed. The approach of the preparation could supply an idea to prepare other polymer/clay nanocomposites.

Optimization of TiO2-P25 photocatalyst dose and H2O2 concentration for advanced photo-oxidation using smartphone-based colorimetry

Color images taken by a smartphone camera were used to estimate the rate of advanced photo-oxidation reaction of Direct Red 23 (DR23) azo dye as a model organic pollutant. The red, green, blue color coordinates were tested to quantify the dye. Images of the reaction mixture were taken at specified intervals to obtain kinetic lines and reaction rate constants. Both the reaction rate constant and the final degree of degradation were plotted as functions of the photocatalyst dose and the concentration of H₂O₂. The smartphone measurements are fully consistent with the reference spectrophotometry data. The maximum degradation efficiency of the DR23 dye was recorded at C₀(H₂O₂) = 2.5 mM and photocatalyst dose equal to 1.0 mg/L. Higher H₂O₂ concentrations reduce the degradation rate as a result of the side reaction of H₂O₂ with OH radicals. A two-factor experimental design was used to study the effects of photocatalyst dose and H₂O₂ concentration with five and seven levels, respectively. The analysis of variance results indicated that the concentration of H₂O₂ had the greater influence. The smartphone provides quick and easy measurement of the photodegradation rate directly in the solutions without sampling. The proposed approach can be applied under field conditions in wastewater treatment plants.

Simultaneous removal of organics and heavy metals from industrial wastewater: A review

The co-existence of heavy metals and organics in industrial effluents is a prevalent problem. These pollutants usually have dissimilar compositions and properties, making their complete removal very tedious even with the use of conventional methods. In some cases, organics and heavy metals usually exist in a mixed matrix in industrial wastes. This poses harmful health risks to humans, aquatic lives and the entire ecosystem, because majority of these mixed pollutants amass in water in concentrations which are more than the permissible discharge limits in the environment. Therefore, it is necessary to remove these pollutants in order to prevent them from contaminating both the surface and ground water. Although, the removal of organic compounds and heavy metals (such as Hg, Pb, Cd, As and Cr) could be easily achieved individually, however, these pollutants exist together in many industrial effluents and even in surface waters. Hence the complete removal of these pollutants concurrently in a polluted system is the focus of this study. Several technologies have been used for the simultaneous removal of organics and heavy metal pollutants from water, which includes adsorption, ion exchange, photocatalysis, and coagulation. The success of these techniques depends on the water matrices and the choice of water treatment media such as adsorbents, resins, photocatalysts, and coagulants. The advantages and limitations of these technologies together with their respective mathematical modelling is critically examined in this review. Finally, the effect of joint existence of organic pollutants and heavy metals on the removal efficiency were examined in addition to the mathematical models that discusses the mechanisms of their combine elimination.