Occurrence, statutory guideline values and removal of contaminants of emerging concern by Electrochemical Advanced Oxidation Processes: A review

Recent progress in electro-Fenton technology for the remediation of pharmaceutical compounds in aqueous environments

The global focus on wastewater treatment has intensified in the contemporary era due to its significant environmental and human health impacts. Pharmaceutical compounds (PCs) have become an emerging concern among various pollutants, as they resist conventional treatment methods and pose a severe environmental threat. Advanced oxidation processes (AOPs) emerge as a potent and environmentally benign approach for treating recalcitrant pharmaceuticals. To address the shortcomings of traditional treatment methods, a technology known as the electro-Fenton (EF) method has been developed more recently as an electrochemical advanced oxidation process (EAOP) that connects electrochemistry to the chemical Fenton process. It has shown effective in treating a variety of pharmaceutically active compounds and actual wastewaters. By producing H2O2 in situ through a two-electron reduction of dissolved O2 on an appropriate cathode, the EF process maximizes the benefits of electrochemistry. Herein, we have critically reviewed the application of the EF process, encompassing diverse reactor types and configurations, the underlying mechanisms involved in the degradation of pharmaceuticals and other emerging contaminants (ECs), and the impact of electrode materials on the process. The review also addresses the factors influencing the efficiency of the EF process, such as (i) pH, (ii) current density, (iii) H2O2 concentration, (iv) and others, while providing insight into the scalability potential of EF technology and its commercialization on a global scale. The review delves into future perspectives and implications concerning the ongoing challenges encountered in the operation of the electro-Fenton process for the treatment of PCs and other ECs.

A review on reactive oxygen species generation, anode materials and operating parameters in sonoelectrochemical oxidation for wastewater remediation

The application of sonoelectrochemical (SEC) oxidation technique involving the incorporation of ultrasound irradiation into an electrochemical oxidation system has found enormous success for various purposes, especially for organic synthesis and water treatment. Although its industrial application towards the removal of organic contaminants in water is not popular, its success on the laboratory scale is often attributed to the physical and chemical effects. These effects arise from the influence of ultrasound irradiation, thus eliminating electrode passivation or fouling, improving mass transfer and enhancing reactive oxygen species (ROS) generation. The continuous activation of the electrode surface, improved reaction kinetics and other associated advantages are equally occasioned by acoustic streaming and cavitation. This review hereby outlines common ROS generated in SEC oxidation and pathways to their generation. Furthermore, classes of materials commonly employed as anodes and the influence of prominent operational parameters on the performance of the technique for the degradation of organic pollutants in water are extensively discussed. Hence, this study seeks to broaden the significant promises offered by SEC oxidation to environmentally sustainable technology advances in water treatment and pollution remediation.

Critical review on electrooxidation and chemical reduction of azo dyes: Economic approach

Effective degradation technologies have been extensively investigated and used to remove azo dyes from wastewater for decades. However, no review dealing with both electrooxidation and chemical reduction of azo dyes from an economic and, therefore, application-relevant perspective has been found in the current literature. A novelty of this review article consists not only in the brief summarization and comparison of both methods but mainly in the evaluation of their economic side. Based on the literature survey of the last 15 years, the costs of treatment approaches published in individual research articles have been summarized, and the missing data have been calculated. A broad spectrum of advanced electrode materials and catalysts have been developed and tested for the treatment, specifically aiming to enhance the degradation performance. An outline of the global prices of electrode materials, reducing agents, and basic chemicals is involved. All additional costs are described in depth in this review. The advantages and disadvantages of respective methods are discussed. It was revealed that effective and cheap treatment approaches can be found even in advanced degradation methods. Based on the collected data, electrooxidation methods offer, on average, 30 times cheaper treatment of aqueous solutions. Concerning chemical reduction, only ZVI provided high removal of azo dyes at prices <100 $ per kg of azo dye. The factors affecting total prices should also be considered. Therefore, the basic diagram of the decision-making process is proposed. In the conclusion, challenges, future perspectives, and critical findings are described.

Resource recovery and contaminants of emerging concern mitigation by microalgae treating wastewater

This study aimed to investigate the recovery of agricultural biostimulants and biogas from microalgae treating wastewater, in the framework of a circular bioeconomy. To this end, municipal wastewater was treated in demonstrative raceway ponds, and microalgal biomass (Scenedesmus sp.) was then harvested and downstream processed to recover biostimulants and biogas in a biorefinery approach. The effect of microalgal biostimulants on plants was evaluated by means of bioassays, while the biogas produced was quantified in biochemical methane potential (BMP) tests. Furthermore, the fate of contaminants of emerging concern (CECs) over the process was also assessed. Bioassays confirmed the biostimulant effect of microalgae, which showed gibberellin-, auxin- and cytokinin-like activity in watercress seed germination, mung bean rooting, and wheat leaf chlorophyll retention. In addition, the downstream process applied to raw biomass acted as a pre-treatment to enhance anaerobic digestion performance. After biostimulant extraction, the residual biomass represented 91% of the methane yield from the raw biomass (276 mLCH4·g-1VS). The kinetic profile of the residual biomass was 43% higher than that of the unprocessed biomass. Co-digestion with primary sludge further increased biogas production by 24%. Finally, the concentration of CECs in wastewater was reduced by more than 80%, and only 6 out of 22 CECs analyzed were present in the biostimulant obtained. Most importantly, the concentration of those contaminants was lower than in biosolids that are commonly used in agriculture, ensuring environmental safety.

Occurrence, ecotoxicity and ecological risks of psychoactive substances in surface waters

Psychoactive substances (PSs) represent a subset of emerging contaminants. Their widespread production and utilization contribute to a growing ecological burden and risk on a global scale. Conventional wastewater treatment methods have proven insufficient in adequately removing psychoactive substances, leading to their occurrence in surface water ecosystems worldwide. As of present, however, a thorough understanding of their geographical prevalence and distribution patterns remains elusive. Further, in the existing literature, there is a scarcity of comprehensive overviews that systematically summarize the toxicity of various psychoactive substances towards aquatic organisms. Through summarizing almost 140 articles, the present study provides an overview of the sources, pollution status, and biotoxicity of psychoactive substances in surface waters, as well as an assessment of their ecological risks. Concentrations of several psychoactive substances in surface waters were found to be as high as hundreds or even thousands of ng·L-1. In parallel, accumulation of psychoactive substances in the tissues or organs of aquatic organisms was found to potentially cause certain adverse effects, including behavioral disorders, organ damage, and DNA changes. Oxidative stress was found to be a significant factor in the toxic effects of psychoactive substances on organisms. The application of the risk quotient approach indicated that psychoactive substances posed a medium to high risk in certain surface water bodies, as well as the need for sustained long-term attention and management strategies.

Reducing citrus effluent toxicity: Biological-electrochemical treatment with diamond anode

One challenge of the citrus industry is the treatment and disposal of its effluents due to their high toxicity, substantial organic load, and consequent resistance to conventional biotechnological processes. This study introduces a novel approach, using electrochemical oxidation with a boron-doped diamond anode to efficiently remove organic compounds from biodegraded pulp wash (treated using the fungus Pleurotus sajor-caju.) The findings reveal that employing a current density of 20 mA cm-2 achieves notable results, including a 44.1% reduction in color, a 70.0% decrease in chemical oxygen demand, an 88.0% reduction in turbidity, and an impressive 99.7% removal of total organic carbon (TOC) after 6 h of electrolysis. The energy consumption was estimated at 2.93 kWh g-1 of removed TOC. This sequential biological-electrochemical procedure not only significantly reduced the mortality rate (85%) of Danio rerio embryos but also reduced the incidence of morphologically altered parameters. Regarding acute toxicity (LC50) of the residue, the process demonstrated a mortality reduction of 6.97% for D. rerio and a 40.88% lethality decrease for Lactuca sativa seeds. The substantial reduction in toxicity and organic load observed in this study highlights the potential applicability of combined biological and electrochemical treatments for real agroindustrial residues or their effluents.

Effect of the anode material, applied current and reactor configuration on the atenolol toxicity during an electrooxidation process

Atenolol (ATL) is a beta-blocker pharmaceutical product which is excreted mainly unchanged and may represent a long-term risk for organisms present in the sea and in fresh water. Due to its low biodegradation rate, electrochemical advanced oxidation processes (EAOPs) can be used to remove this compound. In this work, ATL ecotoxicity was analyzed in the presence of sodium sulfate (Na2SO4), which is widely used as supporting electrolyte in EAOPs. Ecotoxicity values were expressed as the pollutant concentration that leads to a 50% inhibition of the root elongation of Lactuca sativa seeds in relation to the control (EC50(5 days)). The obtained values for ATL showed an EC50(5 days) of 1377 mg L-1 towards Lactuca sativa. When Na2SO4 was added, the toxicity of the sample increased but no synergy was detected between both compounds. With 2 g L-1 Na2SO4, ATL showed an EC50(5 days) of 972 mg L-1; and with 4 g L-1 Na2SO4 and higher concentrations, EC50 value for ATL was 0 mg L-1. Statistical tools were used to obtain the zones of the [ATL]-[Na2SO4] plane which are toxic towards Lactuca sativa. Solutions containing ATL and Na2SO4 were treated by electrooxidation. Two anode materials (a boron-doped diamond electrode and a microporous Sb-doped SnO2 ceramic one); three operation currents (0.4, 0.6 and 1 A); and two reactor configurations (one-compartment reactor and two-compartment reactor separated by a cation exchange membrane) were used. Lactuca sativa seeds and Vibrio fischeri bacterium tests were employed to evaluate the toxicity of the solutions before and after applying the electrooxidation process. In all the tests, the ecotoxicity of the treated sample increased. This fact is owing to the persulfate presence in the solution due to the sulfate electrochemical oxidation. Nevertheless, none of the final samples were toxic towards Vibrio fischeri because ecotoxicity values were lower than 10 TU; and, in the case of the one-compartment reactor, practically all of them were also non-toxic towards Lactuca sativa. The toxicity of the treated samples increased when using the two-compartment reactor in the presence of the BDD anode, and when the operation current was increased. This is attributed to the highest formation of persulfates. Amongst all the tests performed in this work, the lowest toxicity value (i.e., 3 TU) together with the complete mineralization and degradation degrees was achieved with the two-compartment reactor using the BDD anode and operating at 0.6 A.

A combined experimental and computational approach to unravel degradation mechanisms in electrochemical wastewater treatment

Electrochemical wastewater treatment is a promising technique to remove recalcitrant pollutants from wastewater. However, the complexity of elucidating the underlying degradation mechanisms hinders its optimisation not only from a techno-economic perspective, as it is desirable to maximise removal efficiencies at low energy and chemical requirements, but also in environmental terms, as the generation of toxic by-products is an ongoing challenge. In this work, we propose a novel combined experimental and computational approach to (i) estimate the contribution of radical and non-radical mechanisms as well as their synergistic effects during electrochemical oxidation and (ii) identify the optimal conditions that promote specific degradation pathways. As a case study, the distribution of the degradation mechanisms involved in the removal of benzoic acid (BA) via boron-doped diamond (BDD) anodes was elucidated and analysed as a function of several operating parameters, i.e., the initial sulfate and nitrate content of the wastewater and the current applied. Subsequently, a multivariate optimisation study was conducted, where the influence of the electrode nature was investigated for two commercial BDD electrodes and a customised silver-decorated BDD electrode. Optimal conditions were identified for each degradation mechanism as well as for the overall BA degradation rate constant. BDD selection was found to be the most influential factor favouring any mechanism (i.e., 52-85% contribution), given that properties such as its boron doping and the presence of electrodeposited silver could dramatically affect the reactions taking place. In particular, decorating the BDD surface with silver microparticles significantly enhanced BA degradation via sulfate radicals, whereas direct oxidation, reactive oxygen species and radical synergistic effects were promoted when using a commercial BDD material with higher boron content and on a silicon substrate. Consequently, by simplifying the identification and quantification of underlying mechanisms, our approach facilitates the elucidation of the most suitable degradation route for a given electrochemical wastewater treatment together with its optimal operating conditions.

Development of an environmentally sustainable technique to minimize the sludge production in the textile effluent sector through an electrokinetic (EK) coupled with electrooxidation (EO) approach

This study presents an environmentally sustainable method for minimizing sludge production in the textile effluent sector through the combined application of electrokinetic (EK) and electrooxidation (EO) processes. AAS and XRF analyses reveal that utilizing acidic electrolytes in the EK method successfully eliminates heavy metals (Cu, Mn, Zn, and Cr) from sludge, demonstrating superior efficiency compared to alkaline conditions. In addition, the total removal efficiency of COD contents was calculated following the order of EK-3 (60%), EK-1 (51%) and EK-2 (34%). Notably, EK-3, leveraging pH gradient fluctuations induced by anolyte in the catholyte reservoir, outperforms other EK systems in removing COD from sludge. The EK process is complemented by the EO process, leading to further degradation of dye and other organic components through the electrochemical generation of hypochlorite (940 ppm). At an alkaline pH of 10.0, the color and COD removal were effectively achieved at 98 and 70% in EO treatment, compared to other mediums. In addition, GC-MS identified N-derivative residues at the end of the EO. This study demonstrates an integrated approach that effectively eliminates heavy metals and COD from textile sludge, combining EK with EO techniques.

Phenolic compounds in water: Review of occurrence, risk, and retention by membrane technology

Phenolic compounds are one of the main contributors to water source contamination worldwide. In this review, the data collected on Elsevier, Scopus, and Pubmed, considering papers published between 2000 and 2023, showed more than 60 different phenols have been identified in water matrix (<0.065-179,000,000 ng L-1). The highest concentration reported was in surface water canals in India. The most recurrent and studied compound was bisphenol A (n = 93) in concentrations ranging from 0.45 to 2,970,000 ng L-1. The solid phase extraction (HBL Oasis cartridge) and methanol as solvent was the method of pre-concentration most used followed by gas chromatography for the determination of phenols in water samples. The importance of drinking water guidelines incorporating more phenolic compounds was emphasized given the variety of these compounds quantified in water matrix. The human health risk assessment (HRA) was performed for the min-max concentrations of the pollutants reported in the literature. High HRA even at the lowest concentrations for 2-nitrophenol, 2,6-dichlorophenol, 3,4,5-trichlorophenol, 2,3,4,6-tetrachlorophenol, and 2,4-dinitrophenol was recognized. The cancer risk estimated was considered possible for 3-methylphenol, 2,4-dimethylphenol, 2,4,6-trichlorophenol, pentachlorophenol, and 2,4-dinitrophenol in the highest concentrations. The in-depth discussion of mechanisms, advantages, challenges, and carbon footprint of membrane technologies in water treatment and phenols retention demonstrated the great potential and trends for the production of safe drinking water, highlighting reverse osmosis, as a mature technology, and membrane distillation, as an emergent technology.

Advances in identifying and managing emerging contaminants in aquatic ecosystems: Analytical approaches, toxicity assessment, transformation pathways, environmental fate, and remediation strategies

Emerging contaminants (ECs) are increasingly recognized as threats to human health and ecosystems. This review evaluates advanced analytical methods, particularly mass spectrometry, for detecting ECs and understanding their toxicity, transformation pathways, and environmental distribution. Our findings underscore the reliability of current techniques and the potential of upcoming methods. The adverse effects of ECs on aquatic life necessitate both in vitro and in vivo toxicity assessments. Evaluating the distribution and degradation of ECs reveals that they undergo physical, chemical, and biological transformations. Remediation strategies such as advanced oxidation, adsorption, and membrane bioreactors effectively treat EC-contaminated waters, with combinations of these techniques showing the highest efficacy. To minimize the impact of ECs, a proactive approach involving monitoring, regulations, and public education is vital. Future research should prioritize the refining of detection methods and formulation of robust policies for EC management.

Multivariate optimization of methylene blue dye degradation using electro-Fenton process with self-doped TiO2 nanotube anode

This paper reports the optimization of the electro-Fenton (EF) process using different anode materials for the degradation of Methylene Blue (MB) dye as a model compound. The cathode used was an air-diffusion PTFE, while three different anode materials (Pt, DSA, and self-doped TiO2 nanotubes - SD-TNT) were tested individually. A full factorial design (FFD) with a central point combined with response surface methodology (RSM) was employed to optimize the experimental variables, including solution pH, applied current, and anode material. The optimized EF conditions involved a pH of 4.0, a current of 100 mA, and an SD-TNT anode for 120 min of electrolysis. Under these conditions, the MB solution achieved complete decolorization and 45% of total organic carbon (TOC) removal after 120 min of EF treatment. The findings indicate that the hydroxyl radical (•OH) plays a crucial role as the primary oxidizing agent in the EF process. The decay of MB followed pseudo-first-order kinetics, reflecting a consistent formation of •OH radicals that effectively attacked the MB dye and its subproducts during mineralization. Moreover, the EF process exhibited superior performance in terms of energy consumption (EC) and mineralization current efficiency (ECM) in the initial treatment stages, while the presence of recalcitrant by-products and loss of anode self-doping impacted performance in the later stages. The optimized EF conditions and the understanding gained from this study contribute to the advancement of sustainable wastewater treatment strategies for the removal of organic dyes.

Application of iron-intercalated graphite for modification of nickel foam cathode in heterogeneous electro-Fenton system: Bisphenol A removal from water at neutral pH

The presence of bisphenol A (BPA) in natural waters can be highly harmful due to its high persistence and adverse effects, raising concerns to remove this hazardous compound. Herein, an electro-Fenton system is proposed to eliminate BPA, wherein the iron source in the Fenton reaction is provided by its intercalation into the carbon layers of graphite. The produced heterogeneous catalyst was then coated onto the nickel foam serving as a cathode. The magnetic graphite intercalated compound (mGIC) and the modified cathode (before and after experiments) were characterized by FE-SEM, EDX, XPS, and XRD analyses. Some effective parameters, namely pH (3-9), current density (0-20 mA cm-2), and BPA concentration (0.5-20 mg L-1) were studied. At pH 3, the removal of BPA was 95.52%, and under neutral circumstances, the BPA and TOC removals were 85.70 and 58.12%, respectively at the initial BPA concentration of 10 mg L-1. The proposed system was also applied to several water sources spiked with BPA at the concentration of 5 mg L-1 under neutral pH, which exhibited considerable removal of 99.74%, 99.72%, and 92.70% for groundwater, municipal effluent wastewater, and tap water, respectively. The proposed system was applied for 15 consecutive cycles without showing significant changes in BPA removal, indicating its excellent stability and reusability. Furthermore, based on the analysis of intermediates, a possible decomposition pathway was proposed, indicating a reduction in overall toxicity. By using the proposed heterogeneous electro-Fenton system, iron waste is avoided, and operational costs of treatment can be reduced due to the absence of iron sludge production and catalyst loss.

Reduction of the environmental impact of wastewater from the pretreatment of biodiesel production: A hybrid proposal for decontamination via photo-electro-Fenton/Fered/O3

Complex wastewater is generated during biodiesel production. We propose a new solution for the treatment of wastewater from enzymatic pretreatment of biodiesel production (WEPBP) by using a hybrid system based on the photo-Fered-Fenton process with O₃ assistance (PEF-Fered-O₃). We applied response surface methodology (RSM) to determine the suitable conditions for the PEF-Fered-O₃ process: a current intensity of 3 A, an initial solution pH controlled at 6.4, an initial H₂O₂ concentration of 12,000 mg L^-1, and an O₃ concentration of 50 mg L^-1. We performed three new experiments under similar conditions with slight changes to the conditions, namely a longer reaction time (120 min) and single or periodic H₂O₂ addition (i.e., small H₂O₂ additions at different reaction times). Periodic H₂O₂ addition provided the best removal results probably by reducing the occurrence of undesired side reactions that cause hydroxyl radical (^•OH) scavenging. With the application of the hybrid system, the chemical oxygen demand (COD) and total organic carbon (TOC) decreased by 91% and 75%, respectively. We also evaluated the presence of metals such as iron, copper, and calcium; electric conductivity; and voltage at 5, 10, 15, 30, 45, 60, 90, and 120 min. We submitted raw and treated WEPBP sludge samples to X-ray diffraction to study the degree of crystallinity. There was a rearrangement of the compounds present in treated WEPBP, possibly caused by oxidation of a large fraction of organic matter. Finally, we evaluated the genotoxicity and cytotoxicity of WEPBP by using Allium cepa meristematic root cells. Treated WEPBP was less toxic to these cells, denoted by improvements in gene regulation and cell morphology. Given the current scenario for the biodiesel industry, applying the proposed hybrid PEF-Fered-O₃ system at suitable conditions provides an efficient alternative to treat a complex matrix, namely WEPBP, to reduce its potential to cause abnormalities in the cells of living organisms. Thus, the negative impacts of the discharge of WEPBP in the environment might be reduced.

FeMo@porous carbon derived from MIL-53(Fe)@MoO3 as excellent heterogeneous electro-Fenton catalyst: Co-catalysis of Mo

An ultra-efficient electro-Fenton catalyst with porous carbon coated Fe-Mo metal (FeMo@PC), was prepared by calcining MIL-53(Fe)@MoO₃. This FeMo@PC-2 exhibited impressive catalytic performance for sulfamethazine (SMT) degradation with a high turnover frequency value (7.89 L/(g·min)), much better than most of reported catalysts. The mineralization current efficiency and electric energy consumption were 83.2% and 0.03 kWh/g_TOC, respectively, at low current (5 mA) and small dosage of catalyst (25.0 mg/L). The removal rate of heterogeneous electro-Fenton (Hetero-EF) process catalyzed by FeMo@PC-2 was 4.58 times that of Fe@PC/Hetero-EF process. Because the internal-micro-electrolysis occurred between PC and Fe⁰, while the co-catalysis of Mo accelerated the rate-limiting step of the Fe³⁺/Fe²⁺ cycle and greatly improved the H₂O₂ utilization efficiency. The results of radical scavenger experiments and electron paramagnetic resonance confirmed the main role of surface-bound hydroxyl radical oxidation. This process was feasible to remove diverse organic contaminants such as phenol, 2,4-dichlorophenoxyacetic acid, carbamazepine and SMT. This paper enlightened the importance of the doped Mo, which could greatly improve the activity of the iron-carbon heterogeneous catalyst derived from metal-organic frameworks in EF process for efficient removal of organic contaminants.

Legacy and emerging poly- and perfluoroalkyl substances in wastewater treatment plant and receiving water: abundance, removal, and potential ecological risk

Poly- and perfluoroalkyl substances (PFASs) are toxic persistent organic pollutants and bioaccumulative chemicals, which affect the environment and ecology. PFASs in the wastewater treatment plant (WWTP) and receiving river downstream were investigated. Fourteen out of eighteen PFASs were detected, ranging from 197 to 0.14 ng L^-1. The main pollutants were 2,3,3,3-tetrafluoro-2-(1,1,2,2,3,3,3-heptafluoro-propoxy) propanoic acid (HFPO-DA), perfluorooctane sulfonate (PFOS), and perfluorooctanoic acid (PFOA). The concentration of HFPO-DA (181 ng L^-1) was the highest in influent, which indicated the use and emission of PFASs in the sewage collection region of WWTP changed from legacy to emerging ones. However, PFOS from catering wastewater as the main source was dominant PFASs in the reclaimed water. Biological treatment could be effective in the removal of PFASs, especially for HFPO-DA. HFPO-DA could directly bind to cytochrome P450 and bring potential ecotoxicity to the surrounding environment, and the ecological risk of degradation products should be under consideration. Coagulation might result in PFASs release from sludge. More attention should be paid to sewage treatment process decision of WWTP for the control of PFASs.

Electrochemical degradation of 10,11-dihydro-10-hydroxy carbamazepine as the main metabolite of carbamazepine

10,11-Dihydro-10-hydroxy carbamazepine has been degraded in deionized water and wastewater samples using an electrochemical process. The anode used in the treatment process was graphite-PVC. Different factors such as initial concentration, NaCl amount, type of matrix, applied voltage, role of H₂O₂, and pH solution were investigated in the treatment of 10,11-dihydro-10-hydroxy carbamazepine. From the outcome of the results, it was noticed that the chemical oxidation of the compound followed a pseudo-first-order reaction. The rate constants were ranged between 22 × 10^-4 and 483 × 10^-4 min^-1. After electrochemical degradation of the compound, several by-products were raised, and they were analyzed using an accurate instrument, liquid chromatography-time of flight-mass spectrometry (LC-TOF/MS). In the present study, the treatment of the compound was followed by high energy consumption under 10 V and 0.5 g NaCl, reaching up to 0.65 Wh mg^-1 after 50 min. The inhibition of E. coli bacteria after incubation of the treated 10,11-dihydro-10-hydroxy carbamazepine sample was investigated in terms of toxicity.

Generation, toxicity, and reduction of chlorinated byproducts: Overcome bottlenecks of electrochemical advanced oxidation technology to treat high chloride wastewater

Electrochemical advanced oxidation process (EAOP) is recommended for high-strength refractory organics wastewater treatment, but the accompanying chlorinated byproduct generation becomes a bottleneck that limits the application of this technology to actual wastewater. In this study, we applied EAOP (0.4-40 mA cm^-2) to treat ultrafiltration effluent of an actual landfill leachate, and quantitatively assessed the toxicities of the dominant chlorinated byproducts in EAOP-treated effluent. Considering both toxic effect and dose, it followed the order: active chlorine > chlorate > perchlorate > organochlorines. The toxic active chlorine could spontaneously decompose by settling. And secondary bioreactor originally serving for denitrification could be used to reduce perchlorate and chlorate. The effects of residual active chlorine and extra carbon addition on simultaneous denitrification, perchlorate, and chlorate reduction were investigated. It seemed that 20 mg of active chlorine was an acceptable level to bioactivity, and sufficient electron donors favored the removal of chlorate and perchlorate. Pseudomonas was identified as an active chlorine tolerant chlorate-reducing bacteria. And Thauera was responsible for perchlorate reduction under the conditions of sufficient carbon source supply. Our results confirmed that the perchlorate and chlorate concentrations in the effluent below their health advisory levels were achievable, solving the issue of toxic chlorinated byproduct generation during EAOP. This study provided a solution to realistic application of EAOP to treat high chloride wastewater.

Appraising efficacy of existing and advanced technologies for the remediation of beta-blockers from wastewater: A review

The discharge of emerging pollutants, such as beta-blockers (BB), has been recognized as one of the major threats to the environment due to the ecotoxicity associated with these emerging pollutants. The BB are prescribed to treat high blood pressure and cardiovascular diseases; however, even at lower concentration, these pollutants can pose eco-toxic impacts towards aquatic organisms. Additionally, owing to their recalcitrant nature, BB are not effectively removed through conventional technologies, such as activated sludge process, trickling filter and moving bed bioreactor; thus, it is essential to understand the degradation mechanism of BB in established as well as embryonic technologies, like adsorption, electro-oxidation, Fenton process, ultraviolet-based advance oxidation process, ozonation, membrane systems, wetlands and algal treatment. In this regard, this review articulates the recalcitrant nature of BB and their associated removal technologies. Moreover, the major advantages and limitations of these BB removal technologies along with the recent advancements with regard to the application of innovative materials and strategies have also been elucidated. Therefore, the present review intends to aid the researchers in improving the BB removal efficiency of these technologies, thus alleviating the problem of the release of BB into the environment.

New hybrid strategy of the photo-Fered-Fenton process assisted by O3 for the degradation of wastewater from the pretreatment of biodiesel production

The present work aims to fill a scientific gap regarding the treatment of wastewater from the enzymatic pretreatment of biodiesel production (WEPBP), as well as the identification of organic contaminants present in this complex matrix. Different treatment strategies were proposed for the removal of total organic carbon (TOC) and chemical oxygen demand (COD) from WEPBP. The interesting combination of O₃/H₂O₂/UV-Vis and electrocoagulation (EC) process was studied in two setups, with the EC process applied prior to O₃/H₂O₂/UV-Vis and vice versa. Further, the innovative hybrid system based on the photo-Fered-Fenton process with O₃ addition (PEF-Fere-O₃) was preliminarily studied for WEPBP treatment. The hybrid system provided the best results for the WEPBP treatment when the reactor was operated at pH of 4.5, 65 mg O₃ L^-1 and 10000 mg H₂O₂ L^-1, UV-Vis was used as the irradiation source, and the current intensity of 3.0 A. Removals of 45% of TOC and 68.7% of COD were reached within 45 min. Oleic acid, linoleic acid, and Diisooctyl phthalate (DIOP) were the main organic contaminants identified in the WEPBP as determined by Gas Chromatography-Mass Spectrometry (GC-MS) analysis. Acute toxicity assays with the bio indicator Artemia salina were carried out in untreated and treated WEPBP samples, indicating that the PEF-Fere-O₃ treatment decreased the amount of contaminants present in the WEPBP as well as reduced the toxicity levels and increased biodegradability index, suggesting its great potential for the treatment of complex industrial wastewaters.

Optimization and assessment of an electrochemical advanced oxidation system for synthetic stormwater treatment

Electrochemical advanced oxidation processes (eAOPs) such as the current advanced oxidation system (AOS) are a type of electrochemical wastewater treatment that creates oxidative species, such as iodide species, chloride species, and hydroxyl radicals, that can treat even the most recalcitrant contaminants. It is important to determine the concentrations and locations of oxidative species in eAOPs for optimization of the wastewater treatment process. In this study, a spectrophotometric methodology was used to determine concentrations of iodide and chloride oxidative species (starting at 10, 25, and 50 ppm) within an AOS under various input voltages (6, 12, and 24 V). Overall, it was found that iodate and chlorite were the dominant species created in their respective treatments. Additionally, the concentration of iodide oxidative species increased with increasing voltage, whereas the chloride species decreased with increasing voltage. The optimal conditions for the efficient creation of AOS oxidative species were 12 V and 10 ppm potassium iodide and 6 V and 10 ppm sodium chloride, respectively. In addition, the use of iodide is recommended for wastewater treatment using the AOS to effectively create oxidative species. Following optimization, the AOS performance was tested for synthetic stormwater. Results indicated that the AOS performed well for reduction of Escherichia coli; however, reduction of other contaminants was inconsistent as would be expected given the AOS was optimized for disinfection, not decontamination. Further AOS optimization for decontamination would be expected to result in improved decontamination performance.

Sonoelectrochemical oxidation of sulfamethoxazole in simulated and actual wastewater on a piezo-polarizable FTO/BaZr x Ti(1-x)O3 electrode: reaction kinetics, mechanism and reaction pathway studies

The sonoelectrochemical (SEC) oxidation of sulfamethoxazole (SMX) in simulated and actual wastewater on FTO/BaZr_(0.1)Ti_(0.9)O₃, FTO/BaZr_(0.05)Ti_(0.95)O₃ and FTO/BaTiO₃ electrodes is hereby presented. Electrodes from piezo-polarizable BaZr_(0.1)Ti_(0.9)O₃, BaZr_(0.05)Ti_(0.95)O₃, and BaTiO₃ materials were prepared by immobilizing these materials on fluorine-doped tin dioxide (FTO) glass. Electrochemical characterization performed on the electrodes using chronoamperometry and electrochemical impedance spectroscopy techniques revealed that the FTO/BaZr_(0.1)Ti_(0.9)O₃ anode displayed the highest sonocurrent density response of 2.33 mA cm^-2 and the lowest charge transfer resistance of 57 Ω. Compared to other electrodes, these responses signaled a superior mass transfer on the FTO/BaZr_(0.1)Ti_(0.9)O₃ anode occasioned by an acoustic streaming effect. Moreover, a degradation efficiency of 86.16% (in simulated wastewater), and total organic carbon (TOC) removal efficiency of 63.16% (in simulated wastewater) and 41.47% (in actual wastewater) were obtained upon applying the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode for SEC oxidation of SMX. The piezo-polarizable impact of the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode was further established by the higher rate constant obtained for the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode as compared to the other electrodes during SEC oxidation of SMX under optimum operational conditions. The piezo-potential effect displayed by the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode can be said to have impacted the generation of reactive species, with hydroxyl radicals playing a predominant role in the degradation of SMX in the SEC system. Additionally, a positive synergistic index obtained for the electrode revealed that the piezo-polarization effect of the FTO/BaZr_(0.1)Ti_(0.9)O₃ electrode activated during sonocatalysis combined with the electrochemical oxidation process during SEC oxidation can be advantageous for the decomposition of pharmaceuticals and other organic pollutants in water.

Effect of electrolyte composition on electrochemical oxidation: Active sulfate formation, benzotriazole degradation, and chlorinated by-products distribution

Electrochemical oxidation is an effective technique for treating persistent organic pollutants, which are hardly removed in conventional wastewater treatment plants. Sulfate and chloride salts commonly used and present in natural wastewater influence the electrochemical degradation process. In this study, the effect of electrolyte composition on the active sulfate species (SO₄^●⁻ and S₂O₈²⁻) formation, benzotriazole degradation-a model organic compound, and chlorinated by-products distribution have been investigated while using a boron-doped diamond (BDD) anode. Different Na₂SO₄:NaNO₃ and Na₂SO₄:NaCl ratios with constant conductivity of 10 mS/cm were used in the experiments and applied anode potential was kept constant at 4.3 V vs. Ag/AgCl. The electrogenerated SO₄^●⁻ and S₂O₈²⁻ formation were faster in 10:1 and 2:1 Na₂SO₄:NaNO₃ ratios than in the 1:0 ratio. The ^●OH-mediated SO₄^●⁻ production has prevailed in 10:1 and 2:1 ratios. However, ^●OH-mediated SO₄^●⁻ production has hindered the 1:0 ratio due to excess chemisorption of SO₄²⁻ on the BDD anode. Similarly, the faster benzotriazole degradation, mineralization, and lowest energy consumption were achieved in the 10:1 Na₂SO₄:NaNO₃ and Na₂SO₄:NaCl ratio. Besides, chlorinated organic by-product concentration (AOX) was lower in the 10:1 Na₂SO₄:NaCl ratio but increased with the increasing chloride ratio in the electrolyte. LC-MS analysis shows that several chlorinated organic transformation products were produced in 0:1 to 2:1 ratio, which was not found in the 10:1 Na₂SO₄:NaCl ratio. A comparatively higher amount of ClO₄⁻ was formed in the 10:1 ratio than in 2:1 to 0:1 ratio. This ClO₄⁻ formation train evidence the effective ^●OH generation in a sulfate-enriched condition because the ClO₄⁻ formation is positively correlated to ^●OH concentration. Overall results show that sulfate-enriched electrolyte compositions are beneficial for electrochemical oxidation of biorecalcitrant organic pollutants.

Investigating a broad range of emerging contaminants in a set of anthropogenically impacted environmental compartments

Environmental compartments are repositories of probably thousands of emerging contaminants (ECs) released along with treated/untreated wastewater. Despite extensive studies on the detection of ECs in surface water, other environmental compartments such as sediments and groundwater are yet to be thoroughly investigated. To assess the heavy anthropogenic impact on the environment, 24 environmental samples comprising of surface water, sediment and groundwater collected from the Yamuna River basin of India were analyzed via target and suspect screening. The surface water and sediment samples were collected from upstream and downstream of densely populated cities and towns situated along the heavily contaminated river Yamuna. The groundwater samples were collected from shallow drinking water wells of the catchment. Liquid chromatography tandem mass-spectroscopy was used to quantify 10 widely consumed pharmaceuticals in the samples. The study also analyzed the potential health hazards posed by the quantified contaminants. In order to evaluate further, the surface water and groundwater samples were subjected to high resolution mass spectrometry (HRMS) screening against a library resulting in a list of 450 ECs in the surface water and 309 ECs in the groundwater. Agricultural chemicals and pharmaceuticals found abundantly in the samples and half of whom were reported first time. The risk quotient was calculated to assess the potential hazard of the target analytes.

Valorization of UWWTP effluents for ammonium recovery and MC elimination by advanced AOPs

The main objective of this study was to generate ready-to-use revalorized irrigation water for fertilization from urban wastewater treatment plant (UWWTP) effluents. The focus was on controlled retention of NH₄⁺ and microcontaminants (MC), using nanofiltration. Retentates generated were treated by solar photo-Fenton at circumneutral pH using Ethylenediamine-N, N'-disuccinic acid (EDDS) iron complexing agent. Solar photo-Fenton degradation efficacy was compared with electrooxidation processes as anodic oxidation, solar-assisted anodic oxidation, electro-Fenton and solar photoelectro Fenton. Finally, phytotoxicity and acute toxicity tests were performed to demonstrate the potentially safe reuse of treated wastewater for crop irrigation. Nanofiltration was able to produce a ready-to-use permeate stream containing recovered NH₄⁺. (valuable nutrient). Solar photo-Fenton treatment at circumneutral pH would only be of interest for rapid degradation of contaminants at less than 1 mg/L in nanofiltration retentates. Other alternative tertiary treatments, such as electrooxidation processes, are a promising alternative when a high concentration of MC requires longer process times. Anodic oxidation was demonstrated to be able to eliminate >80% of microcontaminants and solar-assisted anodic oxidation significantly reduced the electricity consumption. Electro-Fenton processes were the least efficient of the processes tested. Phytotoxicity results showed that irrigation with the permeates reduced germination, root development was mainly promoted and shoot development was positive only at low retention rate (concentration factor = 2). Acute and chronic Daphnia magna toxicity studies demonstrated that the permeate volumes should be diluted at least 50% before direct reuse for crop irrigation.

Emerging Pollutants in Wastewater, Advanced Oxidation Processes as an Alternative Treatment and Perspectives

Emerging pollutants are present in wastewaters treated by conventional processes. Due to water cycle interactions, these contaminants have been reported in groundwater, surface water, and drinking waters. Since conventional processes cannot guarantee their removal or biotransformation, it is necessary to study processes that comply with complete elimination. The current literature review was conducted to describe and provide an overview of the available information about the most significant groups of emerging pollutants that could potentially be found in the wastewater and the environment. In addition, it describes the main entry and distribution pathways of emerging contaminants into the environment through the water and wastewater cycle, as well as some of the potential effects they may cause to flora, fauna, and humans. Relevant information on the SARS-CoV-2 virus and its potential spread through wastewater is included. Furthermore, it also outlines some of the Advanced Oxidation Processes (AOPs) used for the total or partial emerging pollutants removal, emphasizing the reaction mechanisms and process parameters that need to be considered. As well, some biological processes that, although slow, are effective for the biotransformation of some emerging contaminants and can be used in combination with advanced oxidation processes.

Tyrosinase-functionalized polyhydroxyalkanoate bio-beads as a novel biocatalyst for degradation of bisphenol analogues

Bisphenol compounds are emerging contaminants of high concerns with known endocrine-disrupting effects. Biocatalysis provides a green chemistry alternative for advanced treatment in water reclamation. This study createda novel biocatalyst through genetically immobilizing the Bacillus megaterium tyrosinase enzyme (BmTyr) on the surface ofself-assembled polyhydroxyalkanoate (PHA) biopolymer beads (termed PHA-BmTyr) by using synthetic biology techniques and demonstrated one-pot in vivo production of the biocatalyst for effective degradation and detoxification of various bisphenol analogues for the first time. The degradation pathway of bisphenols was determined to be mediated by the monophenolase and diphenolase activity of BmTyr. Notably, biocatalytic bisphenol degradation by PHA-BmTyr could substantially reduce or eliminate estrogenic activity of the contaminants, and the degradation products had remarkably lower acute and chronic toxicity than their parent compounds. Furthermore, the PHA-BmTyr biocatalyst had high reusability for multiple bisphenol degradation reaction cycles and showed excellent stability that retained 100% and 86.6% of the initial activity when stored at 4 °C and room temperature, respectively for 30 days. Also, the PHA-BmTyr biocatalyst could efficiently degrade bisphenol analogues in real wastewater effluent matrix. This study provides a promising approach to develop innovative biocatalysis technologies for sustainable water reclamation.

Electrochemical sensing system for the analysis of emerging contaminants in aquatic environment: A review

This survey distinguishes understudied spaces of arising impurity research in wastewaters and the habitat, and suggests bearing for future checking. Thinking about the impeding effect of toxins on human wellbeing and biological system, their discovery in various media including water is fundamental. This review sums up and assesses the latest advances in the electrochemical detecting of emerging contaminants (ECs). This survey is expected to add to the advancement in electrochemical applications towards the ECs. Different electrochemical insightful procedures like Amperometry, Voltammetry has been examined in this overview. The improvement of cutting edge nanomaterial-based electrochemical sensors and biosensors for the discovery of drug compounds has accumulated monstrous consideration because of their benefits, like high affectability and selectivity, continuous observing, and convenience has been reviewed in this survey. This survey likewise features the diverse electrochemical treatment procedures accessible for the removal of ECs.

Advanced Electrodegradation of Doxorubicin in Water Using a 3-D Ti/SnO2 Anode

This study investigated the application of an advanced electrooxidation process with three-dimensional tin oxide deposited onto a titanium plate anode, named 3-D Ti/SnO2, for the degradation and mineralization of one of the most important emerging contaminants with cytostatic properties, doxorubicin (DOX). The anode was synthesized using a commercial Ti plate, with corrosion control in acidic medium, used as a substrate for SnO2 deposition by the spin-coating method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses revealed that porous SnO2 was obtained, and the rutile phase of TiO2 was identified as an intermediary substrate onto the Ti plate. The results of CV analysis allowed us to determine the optimal operating conditions for the electrooxidation process conducted under a constant potential regime, controlled by the electron transfer or the diffusion mechanisms, involving hydroxyl radicals. The determination of UV–VIS spectra, total organic carbon (TOC), and chemical oxygen demand (COD) allowed us to identify the degradation mechanism and pathway of DOX onto the 3-D Ti/SnO2 anode. The effective degradation and mineralization of DOX contained in water by the electrooxidation process with this new 3-D dimensionally stable anode (DSA) was demonstrated in this study.

Synergistically enhanced oxygen reduction reaction and oxytetracycline mineralization by FeCoO/GO modified cathode in microbial fuel cell

The widespread application of antibiotics have aroused serious pollution over the world. Microbial fuel cell (MFC) air cathode was able to simultaneously recover electricity and perform advanced oxidation of pollutions through electro-Fenton (EF). This study synthesized an iron‑cobalt oxide and graphene composite (FeCoO/GO), which possessed high electrochemical activity and ORR catalytic performance. The uniform decoration of FeCoO/GO in MFC air cathode distinctly increased the electricity generation (4.5 times higher than carbon felt) and oxytetracycline (OTC) degradation and detoxification (1.33 times higher). FeCoO/GO boosted the H₂O₂ generation from ORR (1.14 times higher than CF) and mineralization efficiency of OTC (2.63 times higher than CF). UPLC-QTOF-MS verified that OTC was degraded and mineralized through decarboxylation, demethylation, and carbon ring cleavage by the oxidation of ·OH. The enhanced degradation of OTC was not only benefited from the increased ORR catalytic performance, but also the excellent H₂O₂ catalytic activity by Fe and Co for ·OH generation. This study demonstrated an effective strategy by decorating FeCoO/GO in MFC air cathode for the synergistically enhanced ORR and OTC degradation and detoxification, giving promising guidance for the deep removal of antibiotic pollutants in the environment.

Efficient removal of Cu-EDTA complexes from wastewater by combined electrooxidation and electrocoagulation process: Performance and mechanism study

In this study, combined electrooxidation and electrocoagulation (EO-EC) reactor using RuO₂-IrO₂/Ti and Al electrodes has been built for treatment of Cu-EDTA wastewater. Effects of current density, electrolyte, NaCl concentration, pH and initial concentration on EO-EC performance were investigated. In this study, Cu-EDTA removal efficiency increased with a higher current density. The electrolyte type exerted a significant role in EO-EC process, compared with Na₂SO₄ and NaNO₃, NaCl was a superior supporting electrolyte because the oxidation of Cl^- into Cl₂ provided additional highly reactive oxidant ClO^- for Cu-EDTA oxidation or mineralization. In neutral or alkaline solution, EO-EC reactor performed better than when it was acid. At the condition of current density 10.29 mA cm^-2, C₀(NaCl) 1 g L^-1, C₀(Cu) 50 mg L^-1 and pH 7, the Cu and COD removal efficiency reached 99.85% and 85.01%, respectively within 60 min. The possible mechanism of Cu-EDTA removal was proposed based on SEM, EDS, XRD, FTIR and XPS analysis of the products. Cu-EDTA chelates were degraded or mineralized by direct charge transfer, chemisorbed M(·OH) and active chorine species produced on anode surface, in which degradation intermediates and mineralization products of Cu-EDTA were generated. Meanwhile, residual degradation intermediates and mineralization products were removed by electrocoagulation. In this study, EO-EC process has been proved to be an effective way for the treatment of Cu-EDTA contaminated wastewater.

Spatial and seasonal variations of endocrine disrupting compounds in water and sediment samples of Markman Canal and Swartkops River Estuary, South Africa and their ecological risk assessment

The presence of pharmaceuticals in surface water and sediment has sparked up a global concern, as they could cause harm to human health. In this study, we investigated five pharmaceuticals (caffeine, carbamazepine, sulfamethoxazole, testosterone, and trimethoprim) in surface water and sediment samples from Swartkops River Estuary and Markman Stormwater Canal, in the Eastern Cape Province, South Africa. Ultra-Performance Liquid Chromatography (UPLC) systems coupled with a hyphenated quadrupole-time-of-flight mass spectrometry (QTOF-MS) was used for the analysis. Of the five pharmaceuticals investigated, three were detected in sediment samples at concentrations ranging from BDL - 23.86 μg/kg (dw). Caffeine and sulfamethoxazole were below the detection limit. The finding of this current study suggests that Markman and Motherwell's stormwater canals were potential contributors to pollution in Swartkops River Estuary. Ecotoxicity risk assessment indicated that trimethoprim and carbamazepine could constitute potential risk to aquatic organisms in Markman Canal and Swartkops Estuary, suggesting the need for proper control measure to prevent the pollution from toxicants in aquatic resources.

Toward Selective Oxidation of Contaminants in Aqueous Systems

The presence of diverse pollutants in water has been threating human health and aquatic ecosystems on a global scale. For more than a century, chemical oxidation using strongly oxidizing species was one of the most effective technologies to destruct pollutants and to ensure a safe and clean water supply. However, the removal of increasing amount of pollutants with higher structural complexity, especially the emerging micropollutants with trace concentrations in the complicated water matrix, requires excessive dosage of oxidant and/or energy input, resulting in a low cost-effectiveness and possible secondary pollution. Consequently, it is of practical significance but scientifically challenging to achieve selective oxidation of pollutants of interest for water decontamination. Currently, there are a variety of examples concerning selective oxidation of pollutants in aqueous systems. However, a systematic understanding of the relationship between the origin of selectivity and its applicable water treatment scenarios, as well as the rational design of catalyst for selective catalytic oxidation, is still lacking. In this critical review, we summarize the state-of-the-art selective oxidation strategies in water decontamination and probe the origins of selectivity, that is, the selectivity resulting from the reactivity of either oxidants or target pollutants, the selectivity arising from the accessibility of pollutants to oxidants via adsorption and size exclusion, as well as the selectivity due to the interfacial electron transfer process and enzymatic oxidation. Finally, the challenges and perspectives are briefly outlined to stimulate future discussion and interest on selective oxidation for water decontamination, particularly toward application in real scenarios.

Toxicity and removal of parabens from water: A critical review

Parabens are biocides used as preservatives in food, cosmetics and pharmaceuticals. They possess antibacterial and antifungal activity due to their ability to disrupt cell membrane and intracellular proteins, and cause changes in enzymatic activity of microbial cells. Water, one of our most valuable natural resource, has become a huge reservoir for parabens. Halogenated parabens from chlorination/ozonation of water contaminated with parabens have shown to be even more persistent in water than other types of parabens. Unfortunately, there is dearth of data on their (halogenated parabens) presence and fate in groundwater which serves as a major source of drinking water for a huge population in developing countries. An attempt to neglect the presence of parabens in water will expose man to it through ingestion of contaminated food and water. Although there are reviews on the occurrence, fate and behaviour of parabens in the environment, they largely omit toxicity and removal aspects. This review therefore, presents recent reports on the acute and chronic toxicity of parabens, their estrogenic agonistic and antagonistic activity and also their relationship with antimicrobial resistance. This article further X-rays several techniques that have been employed for the removal of parabens in water and their drawbacks including adsorption, biodegradation, membrane technology and advanced oxidation processes (AOPs). The heterogeneous photocatalytic process (one of the AOPs) appears to be more favoured for removal of parabens due to its ability to mineralize parabens in water. However, more work is needed to improve this ability of heterogeneous photocatalysts. Perspectives that will be relevant for future scientific studies and which will drive policy shift towards the presence of parabens in our drinking waters are also offered. It is hoped that this review will elicit some spontaneous actions from water professionals, scientists and policy makers alike that will provide more data, effective technologies, and adaptive policies that will address the growing threat of the presence of parabens in our environment with respect to human health.

Peracids - New oxidants in advanced oxidation processes: The use of peracetic acid, peroxymonosulfate, and persulfate salts in the removal of organic micropollutants of emerging concern - A review

In recent years, there has been increasing interest in using of advanced oxidation processes in water and wastewater decontamination. As a new oxidants peracids, mainly peracetic acid (PAA) and peracid salts, i.e. peroxymonosulfate (PMS) and persulfate (PS) are used. The degradation process of organic compounds takes place with the participation of radicals, including hydroxyl (^•OH) and sulfate (SO₄^•-) radicals derived from the peracids activation processes. Peracids can be activated in homogeneous systems (UV radiation, d-electron metal ions, e.g. Fe²⁺, Co²⁺, Mn²⁺, base, ozonolysis, thermolysis, radiolysis), or using heterogeneous activation (metals with zero oxidation state, metal oxides, quinones, activated carbon, semiconductors). As a result of oxidation, products of a lower mass than the parent compounds, less toxic, and more susceptible to biodegradation are formed. An important task is to investigate the effect of the peracid activation method and matrix composition on the efficiency of contamination removal. The article presents the latest information about the application of peracids in the removal of organic micropollutants of emerging concern (mainly focuses on endocrine disrupted compounds). The most important information on peracetic acid, peroxymonosulfate and persulfate salts, and methods of their activation are presented. Current uses of these oxidants in organic micropollutants removal are also described. Information was collected on the factors influencing the oxidation process and the effectiveness of pollutant removal. This paper compares PAA, PMS and PS-based processes for the first time in terms of kinetics and efficiency.

Advanced Oxidation Processes Based on Sulfate Radicals for Wastewater Treatment: Research Trends

In this work, the recent trends in the application of the sulfate radical-based advanced oxidation processes (SR-AOPs) for the treatment of wastewater polluted with emerging contaminants (ECs) and pathogenic load were systematically studied due to the high oxidizing power ascribed to these technologies. Additionally, because of the economic benefits and the synergies presented in terms of efficiency in ECs degradation and pathogen inactivation, the combination of the referred to AOPs and conventional treatments, including biological processes, was covered. Finally, the barriers and limitations related to the implementation of SR-AOPs were described, highlighting the still scarce full-scale implementation and the high operating-costs associated, especially when solar energy cannot be used in the oxidation systems.

Facile synthesis of highly active Ti/Sb-SnO2 electrode by sol-gel spinning technique for landfill leachate treatment

Highly active Ti/Sb-SnO₂ electrodes were fabricated using sol-gel spin coating procedure, which exhibited a rough, uniform and multilayer coating structure. The effects of different Sb-SnO₂ film layers on the physiochemical, electrochemical properties and pollutant degradability of electrodes and the mechanism were evaluated on a systematic basis. The electrodes with more active layers exhibited higher electro-catalytic performance. Upon exceeding 8 layers, the promotion effect of the coating was reduced. Considering various factors, this paper recommends preparing Ti/Sb-SnO₂ electrodes coated with 8 layers to obtain higher electro-catalytic ability in landfill leachate treatment. The specific number of coating layers should be determined according to the electrode requirements. This work provided a theoretical basis and technical support for the preparation of Ti-SnO₂ electrodes with high electro-catalytic activity and stability, while it still remains a great challenge to achieve an excellent balance between performance and stability before Ti/Sb-SnO₂ electrodes can be implemented on a large scale in wastewater treatment.

On the performance of distinct electrochemical and solar-based advanced oxidation processes to mineralize the insecticide imidacloprid

Water contamination by contaminants of emerging concern is one of the main challenges to be solved by our desired sustainable society. In the same time, different technologies for water treatment are becoming enough mature to be implemented. In this work, two different advanced oxidation processes (AOP) were investigated: i) electrochemical processes (electrochemical, photoassisted electrochemical, electro Fered-Fenton, and photo-electro Fered-Fenton - PEF-Fered) using a BDD and DSA® electrodes under UVA and UVC irradiation (9 W) and ii) solar-based AOP using four distinct oxidants (HOCl, H₂O₂, S₂O₈^2-, HSO₅^-) in the presence or absence of Fe²⁺ ions to oxidize and mineralize imidacloprid (IMD: 50 mg L^-1) containing solutions. The PEF-Fered (1.0 mM Fe²⁺ and 50 mg L^-1 h^-1 H₂O₂) under UVA or UVC irradiation and HOCl/UVC (NaCl 17 mM) processes using a BDD and DSA® electrodes (10 mA cm ^-2), respectively, performed equally well to completely oxidize and mineralize (∼90%) IMD at the expense of only ∼0.3 kWh g^-1. Low amounts and highly oxidized byproducts identified through liquid chromatography tandem mass spectrometry were observed for the HOCl/UVC process using a DSA® electrode. Concerning the solar-based AOP, all assessed oxidants (4 mM h^-1) successfully oxidized IMD within 3 h of treatment, whereas only H₂O₂ and HOCl led to significant (∼60%) TOC abatement after 6 h treatment. The use of Fe²⁺ (0.5 or 1.0 mM) had no significant improvement in the oxidation and mineralization of IMD.

Mechanistic insights into 2,4-D photoelectrocatalytic removal from water with TiO2 nanotubes under dark and solar light irradiation

Removal of recalcitrant pollutants from water is a major challenge, to which the photoelectrocatalytic processes may be a solution. Applied potential plays a key role in the photocatalytic activity of the semiconductor. This paper investigated the effect of applied potential on the photoelectrocatalytic oxidation of 2,4-Dichlorophenoxyacetic acid (2,4-D) with TiO₂ nanotubular anodes under solar light irradiation. The process was investigated at constant potentials in different regions of the polarization curve: the ohmic region, the saturation region and in the region of the Schottky barrier breakdown. PEC tests were performed in aqueous solutions of 2,4-D, and in the presence of methanol or formic acid, as scavengers of OH^• radicals and holes. Results showed the main mechanism is oxidation by OH^• radicals from water oxidation, while runs with hole scavenger revealed a second mechanism of direct oxidation by holes photogenerated at the electrode surface, with high removal rates due to current doubling effect.

Oxidative degradation and mineralization of the endocrine disrupting chemical bisphenol-A by an eco-friendly system based on UV-solar/H2O2 with reduction of genotoxicity and cytotoxicity levels

A solar-driven advanced oxidation process at a lab scale was studied for the degradation and mineralization of the known endocrine disrupting chemical (EDC), bisphenol A (BPA). Preliminary tests were performed varying the irradiation source, BPA/H₂O₂ ratio, temperature, initial H₂O₂ concentration, initial solution pH, and initial BPA concentration, then, the operational conditions of the UV-solar/H₂O₂ were optimized by a response surface methodology (RSM), providing the following responses: UV-solar/H₂O₂ process at pH 3.0, [BPA]₀ = 25 mg L^-1, [H₂O₂] = 350 mg L^-1, T = 50 °C, achieving BPA degradation of 77.4% and BPA mineralization of 38.2%, H₂O₂ consumption of 230 mg L^-1. From the optimized condition, different pH ranges were tested (3.0; 5.0; 7.0; 9.0; and 11.0), where, at solution pH 5.0 the best removal rates were achieved (89.2% BPA degradation and 49.0% BPA mineralization). The BPA amount in solution was monitored by High Performance Liquid Chromatography (HPLC) and a study of the intermediate reaction by-products was performed by Gas Chromatography-Mass Spectrometry (GC-MS) analyses, highlighting the lower amount of by-products identified when the solution pH 5.0 was employed, rather than the solution pH 3.0. Genotoxicity tests with Zebrafish (Danio rerio) and cytotoxicity tests with Allium cepa were performed aiming to evaluate errors in the cells and nuclear abnormalities of the tested organisms induced by BPA raw samples, as well as by the BPA samples treated by the UV-solar/H₂O₂ process. Therefore, the bio-toxicity levels for an animal and a vegetal bio-indicator were reduced by applying a renewable source of energy as the irradiation source for the UV/H₂O₂ process, representing an efficient and eco-friendly alternative for BPA treatment in aqueous solutions.

Paraben Compounds—Part II: An Overview of Advanced Oxidation Processes for Their Degradation

Water scarcity represents a problem for billions of people and is expected to get worse in the future. To guarantee people’s water needs, the use of “first-hand water” or the reuse of wastewater must be done. Wastewater treatment and reuse are favorable for this purpose, since first-hand water is scarce and the economic needs for the exploration of this type of water are increasing. In wastewater treatment, it is important to remove contaminants of emerging concern, as well as pathogenic agents. Parabens are used in daily products as preservatives and are detected in different water sources. These compounds are related to different human health problems due to their endocrine-disrupting behavior, as well as several problems in animals. Thus, their removal from water streams is essential to achieve safe reusable water. Advanced Oxidation Processes (AOPs) are considered very promising technologies for wastewater treatment and can be used as alternatives or as complements of the conventional wastewater treatments that are inefficient in the removal of such contaminants. Different AOP technologies such as ozonation, catalytic ozonation, photocatalytic ozonation, Fenton’s, and photocatalysis, among others, have already been used for parabens abatement. This manuscript critically overviews several AOP technologies used in parabens abatement. These treatments were evaluated in terms of ecotoxicological assessment since the resulting by-products of parabens abatement can be more toxic than the parent compounds. The economic aspect was also analyzed to evaluate and compare the considered technologies.