Adsorption of 4-n-Nonylphenol and Bisphenol-A on Magnetic Reduced Graphene Oxides: A Combined Experimental and Theoretical Studies

pH-modulated oxidation of organic pollutants for water decontamination: A deep insight into reactivity and oxidation pathway

Solution pH is one of the primary factors affecting the efficiency of water decontamination. Although the influence of pH on oxidants activation, catalyst activity, and reactive oxygen species have been widely explored, there is still a scarcity of systemic studies on the changes in the oxidation behavior of organic pollutants at different pH levels. Herein, we report the influence laws of pH on the forms, reactivities, active sites, degradation pathways, and products toxicities of organic pollutants. Changes in pH cause the protonation or deprotonation of organic pollutants and further affect their forms and chemistry (e.g., electrostatic force, hydrophobicity, and oxidation potential). The oxidation potential of organic pollutants follows the order: protonated form > pristine form > deprotonated form. Moreover, protonation or deprotonation can modify the active sites and degradation pathways of organic pollutants, wherein deprotonation renders them more susceptible to electrophilic attack, while protonation reduces their activity against electrophilic and nucleophilic attacks. Additionally, pH adjustments can modify the degradation pathway and the toxicity of transformation products. Overall, pH changes can affect the oxidation fate of organic pollutants by altering their structure, which distinguishes it from the effect of pH on oxidants or oxidant activation processes.

Exploring the effective adsorption of polystyrene microplastics from aqueous solution with magnetically separable nickel/reduced graphene oxide (Ni/rGO) nanocomposite

Microplastics (MPs) are a potential threat to both humans and aquatic environment as they serve as carriers of various contaminants necessitating the development of reliable, efficient, and ecofriendly techniques to remove MPs from water. In this study, reduced graphene oxide (rGO) magnetized using nickel nanoparticles was utilized as a potent adsorbent for the effective removal of microplastics from water. The synthesized nickel/reduced graphene oxide (Ni/rGO) nanocomposite was characterized by X-ray diffraction (XRD), Raman spectra, vibrating sample magnetometer (VSM), scanning electron microscopy-energy-dispersive X-ray analysis (SEM-EDX), thermogravimetric analysis, and Brunauer-Emmett Teller (BET) analysis. Magnetic Ni/rGO nanocomposite exhibited significant adsorption capability for polystyrene (PS) microspheres allowing the formation of PS-Ni/rGO complex which can be easily separated out using a magnet. The SEM images of PS-Ni/rGO complex confirmed the adsorption of PS microspheres onto the nano adsorbent due to hydrophobic interaction. The adsorbent demonstrated a maximum adsorption capacity of 1250 mg/g. The analysis of isotherm and kinetic models demonstrated that the adsorption mechanism conformed to the Langmuir isotherm and followed pseudo second order kinetics. This study paves a new pathway for the application of magnetically modified reduced graphene oxide for the expedient removal of microplastics from water with the ease of separation using a magnet. The adsorbent was recycled and reused for three times.

Recent advances of application of bentonite-based composites in the environmental remediation

Bentonite-based composites have been widely utilized in the removal of various pollutants due to low cost, environmentally friendly, ease-to-operate, whereas the recent advances concerning the application of bentonite-based composites in environmental remediation were not available. Herein, the modification (i.e., acid/alkaline washing, thermal treatment and hybrids) of bentonite was firstly reviewed; Then the recent advances of adsorption of environmental concomitants (e.g., organic (dyes, microplastics, phenolic and other organics) and inorganic pollutants (heavy metals, radionuclides and other inorganic pollutants)) on various bentonite-based composites were summarized in details. Meanwhile, the effect of environmental factors and interaction mechanism between bentonite-based composites and contaminants were also investigated. Finally, the conclusions and prospective of bentonite-based composites in the environmental remediation were proposed. It is demonstrated that various bentonite-based composites exhibited the high adsorption/degradation capacity towards environmental pollutants under the specific conditions. The interaction mechanism involved the mineralization, physical/chemical adsorption, co-precipitation and complexation. This review highlights the effect of different functionalization of bentonite-based composites on their adsorption capacity and interaction mechanism, which is expected to be helpful to environmental scientists for applying bentonite-based composites into practical environmental remediation.

Hydrothermal synthesis of Mg/Al-layered double hydroxide modified water hyacinth hydrochar for remediation of wastewater containing mordant brown dye

A high-performance dye adsorbent of Mg/Al-layered double hydroxide modified water hyacinth hydrochar (MgAl@WH) was synthesized by a simple hydrothermal method. The surface functional groups, elemental composition, crystalline structure, and surface morphology of the prepared (MgAl@WH) were determined using different analytical techniques. The characterization results revealed that the (MgAl@WH) hydrochar surface offered more active adsorption sites, facilitating the mordant brown (anionic dye) adsorption, leading to its superior performance with much higher uptake capability (311.0 mg g-1 at 298 K) than Mg/Al double hydroxide nanosheets (MgAl DLHs, 80.2 mg g-1 at 298 K) and dried water hyacinth (WH, 10.0 mg g-1 at 298 K). The adsorption behavior of MgAL@WH follows the pseudo second order kinetic model (R2 = 0.999) and Langmuir isotherm model (R2 = 0.999). Moreover, MgAl@WH bonded efficiently with mordant brown dye via hydrogen bonding and interlayer anion exchange with monolayer formation. Additionally, the recycling tests revealed that the MgAl@WH can be reused over 10 cycles without significant change in the removal efficiency. Based on the obtained findings, Mg/Al-layered double hydroxide modified water hyacinth hydrochar (MgAl@WH), for its economic and environmental benefits, has recently been used as an efficient adsorbent to remediate industrial wastewater containing anionic dyes.

Effects of Fe(II) and humic acid on U(VI) mobilization onto oxidized carbon nanofibers derived from the pyrolysis of bacterial cellulose

The effects of Fe(II) and humic acid on U(VI) immobilization onto oxidized carbon nanofibers (Ox-CNFs, pyrolysis of bacterial cellulose) were investigated by batch, spectroscopic and modeling techniques, with results suggesting that, Ox-CNFs exhibited fast adsorption rate (adsorption equilibrium within 3 h), high adsorption performance (maximum adsorption capacity of 208.4 mg/g), good recyclability (no notable change after five regenerations) in the presence of Fe(II) towards U(VI) from aqueous solutions (e.g., 40 % reduction and 10 % adsorption at pH 8.0), which was attributed to the various oxygen-containing functional groups, excellent chemical stability, large specific surface area and high redox effect. U(VI) adsorption increased with increasing pH from 2.0 to 5.0, then high-level plateau and remarkable decrease were observed at 5.0-6.0 and at pH > 6.0, respectively. According to FT-IR and XPS analysis, a negative correlation between U(VI) reduction and organic in the presence of Fe(II) implied that U(VI) reduction was driven by Fe(II) while inhibited by humic acid. The interaction mechanism of U(VI) on Ox-CNFs was demonstrated to be adsorption and ion exchange at low pH and reduction at high pH according to XPS and surface complexation modeling. These findings filled the knowledge gaps pertaining to the effect of Fe(II) on the transformation and fate of U(VI) in the actual environment. This carbon material with distinctive performance and unique topology offers a potential platform for actual application in environmental remediation.

Carbon doping enhances the fluoride removal performance of aluminum-based adsorbents

Excessive fluoride presence in water poses significant environmental and public health risks, necessitating the development of effective remediation techniques. Conventional aluminum-based adsorbents face inherent limitations such as limited pH range and low adsorption capacity. To overcome these challenges, we present a facile solvent-thermal method for synthesizing a carbon-doped aluminum-based adsorbent (CDAA). Extensive characterization of CDAA reveals remarkable features including substantial carbon-containing groups, unsaturated aluminum sites, and a high pH at point of zero charge (pHpzc). CDAA demonstrates superior efficiency and selectivity in removing fluoride contaminants, surpassing other adsorbents. It exhibits exceptional adaptability across a broad pH spectrum from 3 to 12, with a maximum adsorption capacity of 637.4 mg/g, more than 110 times higher than alumina. The applicability of the Langmuir isotherm and pseudo-second-order models effectively supports these findings. Notably, CDAA exhibits rapid kinetics, achieving near-equilibrium within just 5 min. Comprehensive analyses utilizing Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) offer detailed insights into the mechanisms involving electrostatic attraction, ion exchange, and ligand exchange. Carbon-based groups play a role in ligand exchange processes, synergistically interacting with the unsaturated aluminum structure to provide a multitude of adsorption sites. The exceptional attributes of CDAA establish its immense potential as a transformative solution for the pressing challenge of fluoride removal from water sources.

Ameliorating Effects of Graphene Oxide on Cadmium Accumulation and Eco-Physiological Characteristics in a Greening Hyperaccumulator (Lonicera japonica Thunb.)

Graphene oxide (GO), as a novel carbon-based nanomaterial (CBN), has been widely applied to every respect of social life due to its unique composite properties. The widespread use of GO inevitably promotes its interaction with heavy metal cadmium (Cd), and influences its functional behavior. However, little information is available on the effects of GO on greening hyperaccumulators under co-occurring Cd. In this study, we chose a typical greening hyperaccumulator (Lonicera japonica Thunb.) to show the effect of GO on Cd accumulation, growth, net photosynthesis rate (Pn), carbon sequestration and oxygen release functions of the plant under Cd stress. The different GO-Cd treatments were set up by (0, 10, 50 and 100 mg L-1) GO and (0, 5 and 25 mg L-1) Cd in solution culture. The maximum rate of Cd accumulation in the roots and shoots of the plant were increased by 10 mg L-1 GO (exposed to 5 mg L-1 Cd), indicating that low-concentration GO (10 mg L-1) combined with low-concentration Cd (5 mg L-1) might stimulate the absorption of Cd by L. japonica. Under GO treatments without Cd, the dry weight of root and shoot biomass, Pn value, carbon sequestration per unit leaf area and oxygen release per unit leaf area all increased in various degrees, especially under 10 mg L-1 GO, were 20.67%, 12.04%, 35% and 28.73% higher than the control. Under GO-Cd treatments, it is observed that the cooperation of low-concentration GO (10 mg L-1) and low-concentration Cd (5 mg L-1) could significantly stimulate Cd accumulation, growth, photosynthesis, carbon sequestration and oxygen release functions of the plant. These results indicated that suitable concentrations of GO could significantly alleviate the effects of Cd on L. japonica, which is helpful for expanding the phytoremediation application of greening hyperaccumulators faced with coexistence with environment of nanomaterials and heavy metals.

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

Development of Novel PET-PAN Electrospun Nanocomposite Membrane Embedded with Layered Double Hydroxides Hybrid for Efficient Wastewater Treatment

Layered double hydroxides (LDHs) with their unique structural chemistry create opportunities to be modified with polymers, making different nanocomposites. In the current research, a novel PET-PAN embedded with Mg-AI-LDH-PVA nanocomposite membrane was fabricated through electrospinning. SEM, EDX, FTIR, XRD, and AFM were carried out to investigate the structure and morphology of the nanocomposite membrane. The characterization of the optimized nanocomposite membrane showed a beadless, smooth structure with a nanofiber diameter of 695 nm. The water contact angle and tensile strength were 16° and 1.4 Mpa, respectively, showing an increase in the hydrophilicity and stability of the nanocomposite membrane by the addition of Mg-Al-LDH-PVA. To evaluate the adsorption performance of the nanocomposite membrane, operating parameters were achieved for Cr(VI) and methyl orange at pH 2.0 and pH 4.0, respectively, including contact time, adsorbate dose, and pollutant concentration. The adsorption data of the nanocomposite membrane showed the removal of 68% and 80% for Cr(VI) and methyl orange, respectively. The process of adsorption followed a Langmuir isotherm model that fit well and pseudo-2nd order kinetics with R2 values of 0.97 and 0.99, respectively. The recycling results showed the membrane's stability for up to five cycles. The developed membrane can be used for efficient removal of pollutants from wastewater.

Molecular insights into complexation between protein and silica: Spectroscopic and simulation investigations

The synergistic effect of protein-silica complexation leads to exacerbated membrane fouling in the membrane desalination process, exceeding the individual impacts of silica scaling or protein fouling. However, the molecular-level dynamics of silica binding to proteins and the resulting structural changes in both proteins and silica remain poorly understood. This study investigates the complexation process between silica and proteins-negatively charged bovine serum albumin (BSA) and positively charged lysozyme (LYZ) at neutral pH-using infrared spectroscopy (IR), in situ attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and multiple computational simulations. The findings reveal that both protein and silica structures undergo changes during the complexation process, with calcium ions in the solution significantly exacerbating these alterations. In particular, in situ ATR-FTIR combined with two-dimensional correlation spectroscopy analysis shows that BSA experiences more pronounced unfolding, providing additional binding sites for silica adsorption compared to LYZ. The adsorbed proteins promote silica polymerization from lower-polymerized to higher-polymerized species. Furthermore, molecular dynamics simulations demonstrate greater conformational variation in BSA through root-mean-square-deviation analysis and the bridging role of calcium ions via mean square displacement analysis. Molecular docking and density functional theory calculations identify the binding sites and energy of silica on proteins. In summary, this research offers a comprehensive understanding of the protein-silica complexation process, contributing to the knowledge of synergistic behaviors of inorganic scaling and organic fouling on membrane surfaces. The integrated approach used here may also be applicable for exploring other complex complexation processes in various environments.

The Role of Water in the Adsorption of Nitro-Organic Pollutants on Activated Carbon

The density functional theory (DFT) is applied to theoretically study the capture and storage of three different nitro polycyclic aromatic hydrocarbons, 4-nitrophenol, 2-nitrophenol, and 9-nitroanthracene by activated carbon, with and without the presence of water. These species are pollutants derived from vehicle and industry emissions. The modeling of adsorption is carried out at the molecular level using a high-level density functional theory with the B3LYP-GD(BJ)/6-31+G(d,p) level of theory. The adsorption energies of polluting gases considered isolated and in a humid environment are compared to better understand the role of water. The calculations reveal different possible pathways involving the formation of chemical bonds between adsorbent and adsorbate on the formation of intermolecular van der Waals interactions. The negative adsorption energy on AC for the three species is obtained when they are treated individually and in mixture with H2O. The basis-set superposition error, estimated using the counterpoise correction, varies the adsorption energies by 2-13%. Dispersion effects were also taken into account. The adsorption energy ranges from -10 to -414 kJ/mol suggesting a diversity of pathways. The resulting analysis suggests three preferred pathways for capture. The main pathway is physical interaction due to π-π stacking. Other means are capture due to the formation of hydrogen bonds resulting from water adsorbed on the surface and the simultaneous adsorption of pollutant and water where water can act as a link that promotes adsorption. The thermodynamic properties give a clue to the most eco-friendly approaches for molecular adsorption.

Functional graphene oxide for organic pollutants removal from wastewater: a mini review

Graphene oxide (GO), an important derivative of graphene, with a variety of active oxygen-containing groups (hydroxyl, carboxyl and epoxy) on its surface is easy to be functionalized to obtain adsorbent with high adsorption capacity. To date, the adsorption behaviour of organic pollutants by functionalized GO adsorbents have been extensively studied, but there has been no systematic review regarding the functionalization method of GO for the purpose to remove organic pollutants from wastewater. The leading objective of this review is to (i) summarize the functionalization strategies of GO for organic pollutants removal (covalent functionalization and non-covalent functionalization), (ii) evaluate the adsorption performance of functional GO towards organic pollutants by taking aromatic pollutants and dyes as examples and (iii) discuss the regeneration property and adsorption mechanism of functional GO adsorbent. In addition, the problems of existing studies and future research directions are also identified briefly.

Controllable synthesis of Co-Al layered double hydroxides with different anionic intercalation layers for the efficient removal of methyl orange

In order to investigate the effect of the types of interlayer anions on the adsorption performance of LDHs, herein, we synthesized three cobalt-aluminum layered double hydroxides (CoAl-LDHs) with different interlayer anions (NO3-/Cl-/CO32-). The experimental results demonstrate that the CoAl-LDH (Cl-) exhibited high adsorption capacity of 1372.1 mg/g at room temperature and the fastest adsorption rate on methyl orange (MO), mainly attributed to the excellent ion exchange capacity and high specific surface area and pore volume. Furthermore, the ion exchange driven by electrostatic interaction, hydrogen bonding, and surface complexation might be the main mechanisms for MO adsorption on CoAl-LDH (Cl-) and CoAl-LDH (NO3-). However, the MO adsorption on CoAl-LDH (CO32-) was strongly pH-dependent and the optimal pH value was about 3.5. Additionally, the supramolecular structure of CoAl-LDHs-MO was formed through electrostatic interaction, hydrogen bonding, and surface complexation between the host hydroxide layers and the guest MO- after adsorption equilibrium. An in-depth understanding of the differences in the adsorption performance of three anion-intercalated CoAl-LDHs will provide opportunities for further improvement of the adsorption capacity and exhibit a bright future for the design and optimization of efficient nano-adsorbents shortly.

Polypropylene microplastics aging under natural conditions in winter and summer and its effects on the sorption and desorption of nonylphenol

Plastics in the environment undergo various aging effects. Due to the changes in physical and chemical properties, the sorption behavior of aged microplastics (MPs) for pollutants differs from that of pristine MPs. In this paper, the most common disposable polypropylene (PP) rice box was used as the source of MPs to study the sorption and desorption behavior of nonylphenol (NP) on pristine and naturally aged PPs in summer and winter. The results show that summer-aged PP has more obvious property changes than winter-aged PP. The equilibrium sorption amount of NP on PP is summer-aged PP (477.08 μg/g) > winter-aged PP (407.14 μg/g) > pristine PP (389.29 μg/g). The sorption mechanism includes the partition effect, van der Waals forces, hydrogen bonds and hydrophobic interaction, among which chemical sorption (hydrogen bonding) dominates the sorption; moreover, partition also plays an important role in this process. Aged MPs' more robust sorption capacity is attributed to the larger specific surface area, stronger polarity and more oxygen-containing functional groups on the surface that are conducive to forming hydrogen bonds with NP. Desorption of NP in the simulated intestinal fluid is significant owning to intestinal micelles' presence: summer-aged PP (300.52 μg/g) > winter-aged PP (291.08 μg/g) > pristine PP (287.12 μg/g). Hence, aged PP presents a more vital ecological risk.

Enhanced adsorption of 3,4-methylenedioxymethamphetamine by magnetic graphene oxide-polydopamine nanohybrid modified zeolitic imidazolate framework-67 and its micro-mechanism: Experiments and calculations

Exploring the structure-dependent adsorption mechanism of contaminants in wastewater is beneficial to high-efficiency adsorbents design and environmental remediation. In this study, emerging porous material of zeolitic imidazolate framework-67 (ZIF-67) has been modified by the magnetic graphene oxide-polydopamine nanohybrid (mGOP) to obtain three-dimensional ZIF-67/mGOP through an in-situ growth strategy, which was applied to adsorb 3,4-methylenedioxymethamphetamine (MDMA, "ecstasy") in wastewater. A combination of characterizations, experiments (pH, humic acid and ion strength effect) and quantum chemical calculations revealed the microscopic adsorption mechanism involves each single component, of which the hydrogen bond (O/N…HO) and π-π electron donor acceptor (π-π EDA) interactions of mGOP endowed favourable adsorption of ZIF-67/mGOP, and mechanisms of the pore filling and Co-O chelation of ZIF-67 played synergistic effect. Such nanocomposite as a ZIFs-based adsorbent exhibited ultra-high porosity (total pore volume = 0.4033 cm³/g) and specific surface area (995.22 m²/g), revealed the heterogeneity and multilayer adsorption properties, and obtained a theoretical maximum adsorption capacity of 159.845 μg/g which higher than that of mZIF-67 alone. Overall, this work provided an effective strategy for rationally modulate ZIFs-based composites and exploration of adsorption mechanism.

Mechanistic insights into the adsorption of endocrine disruptors onto polystyrene microplastics in water

Microplastics and endocrine disruptors (EDs) are contaminants of emerging concerns and ubiquitously present in aquatic ecosystems, establishing interactions that still are the subject of investigation due to their implications in the cotransport of pollutants. Then, we conducted mechanistic studies based on state-of-art computational chemistry methods to quantitatively understand the interaction mechanisms whereby polystyrene micro or nanoplastics (PS-MPs) interact with representative classes of EDs in water (Ethynylestradiol, Estradiol, and Bisphenol A). The results showed that PS-MPs increase their charge distribution when forming microparticles in water, giving a permanent dipole that explains their increasing solubility in aqueous conditions. In agreement with experimental assessments, the PS-MPs favorably adsorb EDs with adsorption energies larger than 15 kcal/mol, even with comparable stability to nanostructured materials for adsorption, removal, and/or analysis of pollutants. The adsorption occurs via physisorption without covalent binding, bond breaking, or structural preparation energies, where the molecular structure of EDs can favor inner or outer surface adsorption depending on the molecular structure of the adsorbates. A balanced contribution of dispersion and electrostatic stabilizing effects determines the interaction mechanisms, accounting for a whole contribution of 88-90%. The electrostatic contribution emerges from the favorable alignment of the PS-MPs and EDs dipoles upon interaction due to the mild charge transfer between them in solution. In contrast, the dispersion contribution emerges from electron-electron interactions due to the permanent dipoles in adsorbates and adsorbents. Furthermore, thermochemical analyses clarify the role of temperature and pressure effects on the relative adsorption stability among EDs in aquatic environments. Therefore, modeling the adsorption process contributes to new knowledge on the sorption properties of PS-MPs, providing a mechanistic basis to understand the cotransport of pollutants in water environments and their impacts on environmental pollution.

Large-flake graphene-modified biochar for the removal of bisphenol S from water: rapid oxygen escape mechanism for synthesis and improved adsorption performance

The combined effects of graphene and biochar for enhanced adsorption of organic pollutants have not been demonstrated yet. Therefore, the mechanisms of graphene-modified biochar synthesis and its application to adsorption of contaminants remain unclear. In this study, the effect of flake-size graphene on biochar modification and its bisphenol S (BPS) adsorption performance was explored for the first time. Three sizes of graphene oxide were used as the precursor to prepare graphene/biochar composites using pyrolysis. It was found that the graphene with a small flake size was interspersed in the macropores of biochar, while the biochar was completely or mostly wrapped by the large-sized graphene sheet, which effectively prevented the agglomeration and pore blockage of biochar. Large-flake graphene oxide modified biochar (LGB) showed the highest adsorption capacity towards BPS, exhibiting 2.8 times higher adsorption than pristine biochar. Density functional theory (DFT) calculation suggested that the maximum diffusion barrier of O atoms in graphene coated cellulose (most frequently used biochar representative) could be reduced significantly (∼46%) at pyrolysis temperature of 873 K. Taking the advantage of small amount of graphene and enhanced adsorption performance, LGB could be a promising adsorbent for the removal of certain organic pollutants from wastewater and is conducive for the development of high-valued biochar modification.

Next-generation graphene oxide additives composite membranes for emerging organic micropollutants removal: Separation, adsorption and degradation

In the past two decades, membrane technology has attracted considerable interest as a viable and promising method for water purification. Emerging organic micropollutants (EOMPs) in wastewater have trace, persistent, highly variable quantities and types, develop hazardous intermediates and are diffusible. These primary issues affect EOMPs polluted wastewater on an industrial scale differently than in a lab, challenging membranes-based EOMP removal. Graphene oxide (GO) promises state-of-the-art membrane synthesis technologies and use in EOMPs removal systems due to its superior physicochemical, mechanical, and electrical qualities and high oxygen content. This critical review highlights the recent advancements in the synthesis of next-generation GO membranes with diverse membrane substrates such as ceramic, polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The EOMPs removal efficiencies of GO membranes in filtration, adsorption (incorporated with metal, nanomaterial in biodegradable polymer and biomimetic membranes), and degradation (in catalytic, photo-Fenton, photocatalytic and electrocatalytic membranes) and corresponding removal mechanisms of different EOMPs are also depicted. GO-assisted water treatment strategies were further assessed by various influencing factors, including applied water flow mode and membrane properties (e.g., permeability, hydrophily, mechanical stability, and fouling). GO additive membranes showed better permeability, hydrophilicity, high water flux, and fouling resistance than pristine membranes. Likewise, degradation combined with filtration is two times more effective than alone, while crossflow mode improves the photocatalytic degradation performance of the system. GO integration in polymer membranes enhances their stability, facilitates photocatalytic processes, and gravity-driven GO membranes enable filtration of pollutants at low pressure, making membrane filtration more inexpensive. However, simultaneous removal of multiple contaminants with contrasting characteristics and variable efficiencies in different systems demands further optimization in GO-mediated membranes. This review concludes with identifying future critical research directions to promote research for determining the GO-assisted OMPs removal membrane technology nexus and maximizing this technique for industrial application.

Determination of pyrethroids in water samples by dispersive solid-phase extraction coupled with high-performance liquid chromatography

A metal-organic framework UiO-66 was prepared and used as a sorbent for dispersive solid-phase extraction combined with high-performance liquid chromatography (DSPE-HPLC) for extracting and determining four pyrethroids in water samples for the first time. The as-synthesized material was confirmed by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and N₂ adsorption-desorption analysis. In addition, several important parameters affecting DSPE efficiency, including sorbent dosage, extraction time, salt concentration, pH, elution solvent, elution volume, and elution time, were optimized. Under the optimum conditions, the UiO-66 based on the DSPE-HPLC method displayed a wide linear range (10-1000 ng/ml), low limits of detection (2.8-3.5 ng/ml), and good precision (relative standard deviations [RSDs] < 3%) for the four pyrethroids. The recoveries at different spiked levels ranged from 89.3% to 107.7%. In addition, UiO-66 featured good reusability and reproducibility. The results demonstrated that π-π stacking interactions, hydrophobic interactions, and van der Waals forces between UiO-66 and the four pyrethroids played a crucial role in the adsorption process. Meanwhile, the maximum extraction capability could be obtained within 5 min. Thus, the DSPE coupled with the UiO-66 sorbent can be successfully used in the analysis of four pyrethroids in environmental water samples. PRACTITIONER POINTS: Simultaneous determination of four pyrethroids using the developed UiO-66-based DSPE-HPLC method in water samples. The developed method had a short enrichment time, broad linear ranges, a low detection limit, and high enrichment factor. It is showed that π-π stacking interaction, hydrophobic interaction, and van der Waals forces were the main mechanism.

Ultrathin porous carbon nanosheet as an efficient adsorbent for the removal of bisphenol A: The overlooked role of topological defects

Carbon-based materials are emerging as a type of inexpensive and efficient adsorbent, although their genuine adsorption site is still debatable. Herein, we present a novel approach for designing and constructing an ultra-thin defect-rich hierarchically porous carbon nanosheet (ZG-C). The ZG-C sample demonstrated a high adsorption capacity for bisphenol A (BPA) (602.2 mg/g) along with a fast adsorption process (20 min), and stable reusability (the decline efficiency was 9.14% after five consecutive cycles). Based on comprehensive experiments and a number of characterizations, the high adsorption capacity of ZG-C for BPA was connected with the hierarchical porous structure of ZG-C and multiple intrinsic defects of ZG-C. The results of density functional theory (DFT) further demonstrated that topological defects played an indispensable role in promoting adsorption, and its adsorption energy (-0.595 eV) for BPA was much higher than that of other intrinsic defects. This study not only provides an innovative and simple strategy for preparing hierarchically porous carbon-based adsorbent with abundant intrinsic defects for the efficient removal of BPA, but also significantly contributes to the understanding of the application of carbon-based materials to remove bisphenols.

Synthesis of Ce0.1La0.9MnO3 Perovskite for Degradation of Endocrine-Disrupting Chemicals under Visible Photons

The UN Environmental Protection Agency has recognized 4-n-Nonylphenol (NP) and bisphenol A (BPA) as among the most hazardous chemicals, and it is essential to minimize their concentrations in the wastewater stream. These industrial chemicals have been witnessed to cause endocrine disruption. This report describes the straightforward hydrothermal approach adopted to produce Ce0.1La0.9MnO3 (CLMO) perovskite’s structure. Several physiochemical characterization approaches were performed to understand the Ce0.1La0.9MnO3 (CLMO) perovskite crystalline phase, element composition, optical properties, microscopic topography, and molecular oxidation state. Here, applying visible photon irradiation, the photocatalytic capability of these CLMO nanostructures was evaluated for the elimination of NP and BPA contaminants. To optimize the reaction kinetics, the photodegradation of NP and BPA pollutants on CLMO, perovskite was studied as a specification of pH, catalyst dosage, and initial pollutant concentration. Correspondingly, 92% and 94% of NP and BPA pollutants are degraded over CLMO surfaces within 120 and 240 min, respectively. Since NP and BPA pollutants have apparent rate constants of 0.0226 min−1 and 0.0278 min−1, respectively, they can be satisfactorily fitted by pseudo-first-order kinetics. The decomposition of NP and BPA contaminants is further evidenced by performing FT-IR analysis. Owing to its outstanding photocatalytic execution and simplistic separation, these outcomes suggest that CLMO is an intriguing catalyst for the efficacious removal of NP and BPA toxicants from the aqueous phase. This is pertinent for the treatment of endocrine-disrupting substances in bioremediation.

Endocrine disrupting chemicals in the environment: Environmental sources, biological effects, remediation techniques, and perspective

Endocrine disrupting chemicals (EDCs) have been identified as emerging contaminants, which poses a great threat to human health and ecosystem. Pesticides, polycyclic aromatic hydrocarbons, dioxins, brominated flame retardants, steroid hormones and alkylphenols are representative of this type of contaminant, which are closely related to daily life. Unfortunately, many wastewater treatment plants (WWTPs) do not treat EDCs as targets in the normal treatment process, resulting in EDCs entering the environment. Few studies have systematically reviewed the related content of EDCs in terms of occurrence, harm and remediation. For this reason, in this article, the sources and exposure routes of common EDCs are systematically described. The existence of EDCs in the environment is mainly related to human activities (Wastewater discharges and industrial activities). The common hazards of these EDCs are clarified based on available toxicological data. At the same time, the mechanism and effect of some mainstream EDCs remediation technologies (such as adsorption, advanced oxidation, membrane bioreactor, constructed wetland, etc.) are separately mentioned. Moreover, our perspectives are provided for further research of EDCs.

Carbon nanostructures: a comprehensive review of potential applications and toxic effects

There is no doubt that nanotechnology has revolutionized our life since the 1970s when it was first introduced. Nanomaterials have helped us to improve the current products and services we use. Among the different types of nanomaterials, the application of carbon-based nanomaterials in every aspect of our lives has rapidly grown over recent decades. This review discusses recent advances of those applications in distinct categories, including medical, industrial, and environmental applications. The first main section introduces nanomaterials, especially carbon-based nanomaterials. In the first section, we discussed medical applications, including medical biosensors, drug and gene delivery, cell and tissue labeling and imaging, tissue engineering, and the fight against bacterial and fungal infections. The next section discusses industrial applications, including agriculture, plastic, electronic, energy, and food industries. In addition, the environmental applications, including detection of air and water pollutions and removal of environmental pollutants, were vastly reviewed in the last section. In the conclusion section, we discussed challenges and future perspectives.

Efficient Removal of Nonylphenol Contamination from Water Using Optimized Magnesium Silicate

Nonylphenol (NP) is considered to be an environmentally toxic, endocrine-disrupting chemical that affects humans and ecosystems. Adsorption is one of the most promising approaches for the removal of nonylphenol contamination from water. Herein, in order to design an adsorbent with high adsorption capacity, magnesium silicate with different Mg/Si ratios was successfully synthesized by a sol–gel method at 60 °C. Magnesium silicate with a Mg/Si ratio of 1:6 was found to possess the best adsorption performance, with maximum 4−NP sorption 30.84 mg/g under 25 °C and 0.2 g/L adsorbent dose. The adsorption was negatively affected by increasing adsorbent dose and temperature. The kinetics and isotherm of 4−NP adsorption by Mg/Si were well described by the pseudo−second−order and Sips model, respectively, and behavior was proven to be physisorption−enhanced by a chemical effect. Detailed characterization by XRD, BET, and SEM confirmed that the magnesium silicate possesses an amorphous, mesoporous structure. The study will contribute to the applicability of cheap magnesium silicate for removal of NP contamination in water.

N self-doped hierarchically porous carbon derived from biomass as an efficient adsorbent for the removal of tetracycline antibiotics

In this study, we developed a simple strategy to synthesize a N self-doped hierarchically porous carbon adsorbent (LPC-NC) derived from biomass using potassium oxalate monohydrate and calcium carbonate and remove tetracyclines that are major antibiotics frequently measured in surface water. In the pyrolysis process, the N-enriching lotus seed pots biomass decomposed and formed a porous carbon matrix with self-doped N. The LPC-NC displayed high adsorption amount (506.6 mg/g for tetracycline (TTC) and 445.3 mg/g for oxytetracycline (OTC)), short equilibrium time (30 min) and stable reusability (the decline efficiency<8.0% after five cycles). Batch adsorption experimental and theoretical studies showed that the high adsorption capacity of LPC-NC for tetracyclines was mainly ascribed to the self-doped pyridinic-N species and the adsorption capacity of pyridinic-N species at the edge location was better than that of pyridinic-N species at the vacancy location. Importantly, we believe that the high adsorption performance of LPC-NC for tetracyclines is due to the activation of carbon π electrons by destroying the integrity of conjugation on LPC-NC, thus enhancing the π-π interaction between LPC-NC and tetracyclines. In addition, the results of solid-state nuclear magnetic resonance (NMR) confirmed that the hierarchically porous structure of LPC-NC was conducive to the adsorption of tetracyclines. These insights provide new ideas for the rational design of N-doped carbon-based adsorbents for the efficient removal of tetracyclines.

Graphene oxide functionalized with cobalt ferrites applied to the removal of bisphenol A: ionic study, reuse capacity and desorption kinetics

A new adsorbent material based on graphene oxide (GO) functionalized with magnetic cobalt ferrite nanoparticles (γCoFe₂O₄) was synthesized via ultrasonication to remove the endocrine-disrupting-chemical bisphenol A (BPA) from aqueous solutions. The synthesized material (GO-γCoFe₂O₄) was characterized by TEM, SEM, DRX and FTIR analysis. Magnetization measures proved that the adsorbent had superparamagnetic characteristics that facilitated its separation from the aqueous solution. The maximum adsorption capacity obtained was 30 mg g^-1 with adsorbent concentration of 1 g L^-1, temperature of 55°C and natural pH of the solution. The experimental data were better adjusted to the kinetic models of pseudo-second-order and Langmuir isotherm. The thermodynamic parameters showed that the BPA adsorption on GO-γCoFe₂O₄ was spontaneous, exothermic and thermodynamically favourable. Desorption kinetics was performed using 50% ethanol as solvent, resulting in an equilibrium time of 4 h with better adjustment to the pseudo-second order kinetic model. The adsorbent showed a high regeneration capacity maintaining adsorptive capacity above 75% after 6 cycles of reuse.

Effect of γ-Fe2O3 nanoparticles on the composition of montmorillonite and its sorption capacity for pyrene

Fe content and distribution on montmorillonite would probably enhance its sorption capacity for hydrophobic organic pollutants. Thus, Fe modified montmorillonites with different ratios of FeSO₄·7H₂O and Ca-montmorillonite were prepared. The results indicated that γ-Fe₂O₃ nanoparticles were not only generated at the montmorillonite surfaces, but that the γ-Fe₂O₃ also extended the edges of montmorillonite surfaces. The sorption capacities for pyrene were enhanced and even reached 834.79 μg g^-1 with increase in ferrous iron content, but were then suppressed due to aggregation of γ-Fe₂O₃ on montmorillonite surfaces. Furthermore, pyrene was directly observed on γ-Fe₂O₃-montmorillonite surfaces with a lattice spacing parameter of approximately 0.27 nm, indicating that a new phase that mainly contained pyrene was generated during the sorption process. Additionally, after regenerating the γ-Fe₂O₃-montmorillonite composites, they could be reused for at least 5 cycles. It is therefore proposed that the prepared γ-Fe₂O₃-montmorillonite could be exploited as a potential green composite for remediation of hydrophobic organic pollutants in soil and sediment.

Improving nanoplastic removal by coagulation: Impact mechanism of particle size and water chemical conditions

Plastic particles may bring potential threats to the ecosystem. Coagulation, as a widely used method to remove particles, has been rarely studied for plastic particles in the nanometer range. In this work, the coagulation removal of polystyrene nanoplastic particles (PSNPs, 50-1000 nm) was conducted in a model system containing coagulants aluminum chlorohydrate (PAC) and polyacrylamide (PAM). The optimal removal efficiency (98.5%) was observed in the coagulation process at pH= 8.0, 0.4 g·L^-1 PAC and 20 mg·L^-1 PAM. The inhibition impact of humic acid was also noticed, due to its competitive adsorption with PSNPs onto flocs. The interaction energies between PSNPs and PAC were calculated by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, which showed that electrical neutralization resulted in the difference of the remove efficiency in different sizes and coagulant concentrations. The formation of Al-O bond between PSNPs and PAC/PAM flocs promoted the removal of PSNPs. Excessive PAM (> 20 mg·L^-1) increased clusters size and solution viscosity, which resulted in the settling of clusters being controlled by buoyancy and the reduced remove efficiency. The findings suggest that the chemical coagulation dominants the removal of NPs, and the coagulation efficiency can be optimized by choosing suitable coagulant and water chemical conditions.

Adsorption of bisphenol A and 2,4-dichlorophenol onto cetylpyridinium chloride-modified pine sawdust: a kinetic and thermodynamic study

Using biomass wastes as adsorbents is a promising option for organic waste reclamation, but unfortunately, their adsorption capacity is usually limited, especially for hydrophobic organic pollutants. To address this issue, this work prepared cetylpyridinium chloride (a cationic surfactant)-modified pine sawdust (CPC-PS) and further demonstrated their performance for hydrophobic bisphenol A (BPA) and 2,4-dichlorophenol (DCP) adsorption. Compared to the PS, the CPC-PS improved the maximum adsorption capacity for BPA and DCP by approximately 98% and 122%, respectively. The kinetic and thermodynamic analyses showed that the BPA and DCP adsorption onto the CPC-PS fitted the pseudo-second-order kinetics and the Freundlich model. After regeneration using NaOH, the adsorption capacity of the CPC-PS for BPA still maintained 80.2% of the initial value after five cycles. Based on the experimental results, the CPC-PS was proposed to enhance the BPA and DCP adsorption through the solubilization of hemimicelles for hydrophobic organic pollutants, the π-π stacking between benzene-ring structures, and the hydrogen binding between the adsorbents and the pollutants. This work provides a viable method to use surfactant-modified pine sawdust as effective adsorbents to remove hydrophobic pollutants.

Selective Removal of Phenolic Compounds by Peroxydisulfate Activation: Inherent Role of Hydrophobicity and Interface ROS

Selective removal of organic pollutants by advanced oxidation methods has been receiving increasing attention for environmental remediation. In this study, a novel catalyst, which can selectively oxidize phenolic compounds (PCs) based on their hydrophobicity, composed of metal-organic-framework-derived Fe/Fe₃O₄ and three-dimensional reduced graphene oxide (rGOF) is designed for peroxydisulfate (PDS) activation. This heterogeneous PDS activation system can completely degrade hydrophobic PCs within 30 min. By investigating the hydrophobic properties of eight representative PCs, a positive correlation between the hydrophobicity of PC and the reaction kinetics is reported for the first time. The selective removal stems from the strong interaction between highly hydrophobic PCs and the catalyst. Moreover, the mechanism investigation shows that the degradation reaction is triggered by interface reactive oxygen species (ROS). Our study reveals that the selective degradation of organic pollutants by PDS activation depends on the hydrophilic and hydrophobic properties of the pollutant and catalyst. The reported results provide new insights into a highly selective and efficient PDS activation system for organic pollutant removal.

Simulating and Predicting Adsorption of Organic Pollutants onto Black Phosphorus Nanomaterials

Layered black phosphorus (BP) has exhibited exciting application prospects in diverse fields. Adsorption of organics onto BP may influence environmental behavior and toxicities of both organic pollutants and BP nanomaterials. However, contributions of various intermolecular interactions to the adsorption remain unclear, and values of adsorption parameters such as adsorption energies (E_ad) and adsorption equilibrium constants (K) are lacking. Herein, molecular dynamic (MD) and density functional theory (DFT) was adopted to calculate E_ad and K values. The calculated E_ad and K values for organics adsorbed onto graphene were compared with experimental ones, so as to confirm the reliability of the calculation methods. Polyparameter linear free energy relationship (pp-LFER) models on E_ad and logK were developed to estimate contributions of different intermolecular interactions to the adsorption. The adsorption in the gaseous phase was found to be more favorable than in the aqueous phase, as the adsorbates need to overcome cohesive energies of water molecules onto BP. The affinity of the aromatics to BP was comparable to that of graphene. The pp-LFER models performed well for predicting the E_ad and K values, with external explained variance ranging from 0.90 to 0.97, and can serve as effective tools to rank adsorption capacities of organics onto BP.

Insight into the hetero-interactions of 4-nonylphenol with dissolved organic matter: multiple spectroscopic methods, 1H NMR study and principal component analysis

Understanding the interactions between heterogeneous dissolved organic matter (DOM) and nonylphenols (NPs) is essential for predicting their behavior and fate in the environment. Herein, we firstly obtained different MW-fractionated humic acids (HAs) using the ultrafiltration method. Afterward, the molecular weight (MW)-dependent interactions of HAs with 4-nonylphenol (4-NP) were analysed by excitation emission matrix (EEM) fluorescence spectroscopy, fluorescence quenching, UV-vis spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and principal component analysis (PCA). EEM spectra indicated that the quenching mechanism was static. In the binding process, the higher MW fractions showed stronger interaction with 4-NP than the lower MW counterparts, exhibiting a clear MW-dependent interaction heterogeneity. The interaction constants for the 4-NP–HAs system were suppressed as the ionic strength decreased and pH increased, which was especially obvious in the binding of 4-NP to the lower MW-fractionated HAs. The FTIR spectra revealed that hydroxyl and aromatics were involved in the interaction process of HA fractions with 4-NP. It was also found from ¹H NMR that π–π interactions between aromatic rings of 4-NP and MW-fractionated HAs were responsible for the complexation. The correlation analysis and PCA results indicated that aromaticity and MW play important roles in the interaction process and confirmed an obvious interaction heterogeneity among MW-fractionated HAs samples. This work highlighted MW-dependent interaction heterogeneities of HA, which suggested that heterogeneity in MW distribution should be taken into consideration when exploring the fate and biogeochemistry cycling of 4-NP from contaminated environments.

Multiple spectroscopic methods, ¹H NMR study and PCA were used to investigate the heterointeractions of 4-nonylphenol with humic acids.

Modification of cyclodextrin and use in environmental applications

Water pollution, which has become a global problem in parallel with environmental pollution, is a problem that needs to be solved urgently, considering the gradual depletion of water resources. The inadequacy of the water treatment methods and the materials used somehow directed the researchers to look for dual character structures such as biocompatible and biodegradable β-cyclodextrin (β-CD). β-CD, which is normally insoluble in water, is used in demanding wastewater applications by being modified with the help of different agents to be water soluble or transformed into polymeric adsorbents as a result of co-polymerization via cross-linkers. In this way, in addition to the host-guest interactions offered by β-CD, secondary forces arising from these interactions provide advantages in terms of regeneration and reusability. However, the adsorption efficiency and synthesis steps need to be improved. Based on the current studies presented in this review, in which cross-linkers and modification methods are also mentioned, suggestions for novel synthesis methods of new-generation β-CD-based materials, criticisms, and recent methods of removal of micropollutants such as heavy metals, industrial dyes, harmful biomolecules, and pharmaceutics wastes are mentioned.

Highly efficient adsorption and mechanism of alkylphenols on magnetic reduced graphene oxide

The influence of alkylphenols to environment cannot be ignored, as they are common product from chemical industries and potential threat to human health. Some alkylphenols are listed as persistent toxic substances (PTS) by the United Nations Environment Programme (UNEP). In this study, the optimized magnetic reduced graphene oxide (MrGO) was synthesized by a facile solvothermal method, and investigated for adsorption of three typical alkylphenols. In neutral condition, MrGO showed extremely high adsorption capacity of three typical alkylphenols, 4-heptylphenol (4-HP), 4-tert-octylphenol (4-OP), and 4-nonylphenol (4-NP), which could reach 938.9 mg g^-1 (40 °C), 987.8 mg g^-1 (40 °C), and 989.7 mg g^-1 (20 °C), respectively. This study revealed that the adsorption process was a heterogeneous multi-layer physical adsorption, and the adsorption rates were related to the number of unoccupied vacancies on the adsorbent surface. From batch experiments and density functional theory (DFT) calculations, the main adsorption interactions between MrGO and alkylphenols were deduced to be π-π, hydrogen-bond, and hydrophobic interactions. What's more, the different affinities of MrGO towards different targets were further distinguished and explained in detail. The wonderful stability and recyclability of MrGO made it a promising cost-effective remediation candidate.

Imaging adsorption of iodide on single Cu2O microparticles reveals the acid activation mechanism

Imaging an adsorption reaction taking place at the single-particle level is a promising avenue for fundamentally understanding the adsorption mechanism. Here, we employ a dark-field microscopy (DFM) method for in situ imaging the adsorption process of I^- on single Cu₂O microparticles to reveal the acid activation mechanism. Using the time-lapsed DMF imaging, we find that a relatively strong acid is indispensable to trigger the adsorption reaction of I^- on single Cu₂O microparticle. A hollow microparticle with the increase in size is obtained after the adsorption reaction, causing the enhancement of the scattering intensity. Correlating the change of the scattering light intensity or particle size with adsorption capacity of I^-, we quantitatively analyze the selective uptake, slightly heterogeneous adsorption behavior, pH/temperature-dependent adsorption capacity, and adsorption kinetics as well as isotherms of individual Cu₂O microparticles for I^-. Our observations demonstrate that the acid-initiated Kirkendall effect is responsible for the high-reaction activity of single Cu₂O microparticles for adsorption of I^- in the acidic environment, through breaking the unfavorable lattice energy between Cu₂O and CuI as well as generating high-active hollow intermediate microparticle.

Effect of seawater acidification and plasticizer (Bisphenol-A) on aggregation of nanoparticles

This study investigated the effect of an organic pollutant (Bisphenol- A, an endocrine-disrupting chemical) on the stability of a mixture of nanoparticles (NPs). Experiments were conducted in seawater chemistry condition with TiO₂/ZnO NP concentration ratio: 0.01, 0.1, 1, 10,100; pH: 7.4 and 8.1; BPA concentration: 1 and 10 μg/L. The presence of BPA was found to increase the size of NP. Lower pH of 7.4 increased size of NPs from 3 to 297% (at 1 μg/L BPA; NP ratio = 0.1 to 100). Aggregation rate constant values ranged between 0.17 and 1.81 nm/s in pH 7.4 suspension and between 0.48 and 56 nm/s in pH 8.1 suspension. Factors, such as pH and NP mass concentration had major effects on size change for suspension having the same ratio of TiO₂/ZnO. NP aggregate was comprised of 97% ZnO NP, 3% TiO₂ NP and had 1.39 mg/kg BPA. Overall, this study found dominance of van der Waals forces of attraction in mixture suspension of NPs and BPA. The obtained result on NP persistence in seawater can now be used in estimating exposure doses of a mixture of nanoparticles during inadvertent exposure.

Microbe-Assisted Nanocomposite Anodes for Aqueous Li-Ion Batteries

With the rapid increase in the use of lithium-ion batteries (LIBs), the development of safe LIBs has become an important social issue. Replacing flammable organic liquid electrolytes in current LIBs with water can be an alternative route to resolve this safety concern. The water-in-salt (WIS) electrolytes received great attention as next-generation electrolytes due to their large electrochemical stability window. However, their high cathodic limit remains as a challenge, impeding the use of low-potential anodes. Here, we report the first biodirected synthesis of carbonaceous layers on anodes to use them as interlayers that prevent a direct contact of water molecules to anode particles. High-aspect ratio microbes are utilized as precursors of carbonaceous layers on TiO₂ nanoparticles (m-TiO₂) to enhance the conductivity and to reduce the electrolysis of WIS electrolytes. We selected the cylindrical shape of microbes that offers geometric diversity, providing us a toolkit to investigate the effect of microbe length in forming the network in binary composites and their impacts on the battery performance with WIS electrolytes. Using microbes with varying aspect ratios, the optimal microbe size to maximize the battery performance is determined. The effects of storage time on microbe size are also studied. Compared to uncoated TiO₂ anodes, m-TiO₂ exhibited 49% higher capacity at the 40th cycle and enhanced the cycle life close to anodes made with a conventional carbon precursor while using an 11% less amount of carbon. We performed density functional theory calculations to unravel the underlying mechanism of the performance improvement using microbe-derived carbon layers. Computational results show that high amounts of pyridinic nitrogen present in the peptide bonds in microbes are expected to slow down the water diffusion. Our findings provide key insights into the design of an interlayer for WIS anodes and open an avenue to fabricate energy storage materials using biomaterials.

Towards improving the capacity of UiO-66 for antibiotic elimination from contaminated water

Antibiotics are found in natural waters, raising concern about their human and environmental toxicity and the wide occurrence of antibiotic resistant bacteria. The antibiotic resistance crisis is attributed to the overuse and misuse of these medications. Particularly, sulfamethazine (SMT), an antibiotic commonly used in pigs and cattle for the treatment of bacterial diseases, has been detected in the natural environment (soil and water). Among all the technologies developed to combat the deteriorating water quality and control antimicrobial resistance, heterogeneous photocatalysis should be highlighted for the degradation of refractory organic compounds. Here, we described the SMT adsorption and photodegradation capacity of a highly porous and robust zirconium-based MOF UiO-66 under realistic conditions, and its potential recyclability. Further, its SMT removal capacity was improved by functionalizing the MOF porosity (28.5% of SMT adsorption in 24 h for nanoUiO-66-NH2), and nanosizing the MOF (100% SMT photodegradation in only 4 h for nanoUiO-66). Finally, the safety of the formed by-product during SMT photodegradation was confirmed, reinforcing the potential of the application of UiO-66 in water remediation.

Occurrence, potential ecological risks, and degradation of endocrine disrupter, nonylphenol, from the aqueous environment

Nonylphenol (NP) is considered a potential endocrine-disrupting chemical affecting humans and the environment. Due to widespread occurrence in the aquatic environment and neuro-, immuno, reproductive, and estrogenic effects, nonylphenol calls for considerable attention from the scientific community, researchers, government officials, and the public. It can persist in the environment, especially soil, for a long duration because of its high hydrophobic nature. Nonylphenol is incorporated into the water matrices via agricultural run-off, wastewater effluents, agricultural sources, and groundwater leakage from the soil. In this regard, assessment of the source, fate, toxic effect, and removal of nonylphenol seems a high-priority concern. Remediation of nonylphenol is possible through physicochemical and microbial methods. Microbial methods are widely used due to ecofriendly in nature. The microbial strains of the genera, Sphingomonas, Sphingobium, Pseudomonas, Pseudoxanthomonas, Thauera, Novosphingonium, Bacillus, Stenotrophomonas, Clostridium, Arthrobacter, Acidovorax, Maricurvus, Rhizobium, Corynebacterium, Rhodococcus, Burkholderia, Acinetobacter, Aspergillus, Pleurotus, Trametes, Clavariopsis, Candida, Phanerochaete, Bjerkandera, Mucor, Fusarium and Metarhizium have been reported for their potential role in the degradation of NP via its metabolic pathway. This study outlines the recent information on the occurrence, origin, and potential ecological and human-related risks of nonylphenol. The current development in the removal of nonylphenol from the environment using different methods is discussed. Despite the significant importance of nonylphenol and its effects on the environment, the number of studies in this area is limited. This review gives an in-depth understanding of NP occurrence, fate, toxicity, and remediation from the environments.