Microplastic as a Vector for Chemicals in the Aquatic Environment: Critical Review and Model-Supported Reinterpretation of Empirical Studies

Metabolic profile changes of zebrafish larvae in the single- and co-exposures of microplastics and phenanthrene

Microplastics (MPs) are ubiquitous in the environment, and can adsorb organic contaminants (OCs) and be taken by various microorganisms and organisms, which could eventually lead to risk to humans. In this study, the phenotypic changes and metabolic profile alternations of zebrafish in the single- and co-exposure of MPs and phenanthrene (Phe) were investigated. The results showed that significantly higher tail malformation rate and edema rate in zebrafish induced by MPs can be enhanced due to the co-existence of Phe. The metabolomic analysis revealed that both synergistic and antagonistic effects of MPs and Phe on the metabolic alternation of zebrafish larvae exist, since unique perturbations of metabolites or pathways were found in all of the three exposure scenarios. Based on Partial least squares-discriminant analysis, porphine, ribose, and L-glutamic acid were the most important metabolites resulting in the difference between the treated and control groups in the MP exposure, Phe exposure and co-exposure, respectively. Two dysregulated pathways namely d-glutamine and D-glutamate metabolism, and alanine, aspartate and glutamate metabolism were significantly affected in the co-exposure while not in either of the single exposure. These findings provide new insights into the toxic effects of MPs on aquatic organisms, and further studies on combined effects of MPs and OCs are suggested to be conducted.

Microplastic dynamics and risk projections in West African coastal areas: Developing a vulnerability index, adverse ecological pathways, and mitigation framework using remote-sensed oceanographic profiles

Microplastic pollution presents a serious risk to marine ecosystems worldwide, with West Africa being especially susceptible. This study sought to identify the key factors driving microplastic dynamics in the region. Using NASA's Giovanni system, we analyzed environmental data from 2019 to 2024. Results showed uniform offshore air temperatures due to turbulence (25.22-45.62 K) with significant variations nearshore. Salinity levels remained largely stable (4 PSU) but slightly decreased in southern Nigeria. Surface wind speeds rose from 4.206-5.026 m/s in Nigeria to over 5.848 m/s off Mauritania, while eastward stress hotspots were prominent in Nigeria and from Sierra Leone to Senegal. Photosynthetically available radiation (PAR) beam values peaked off Mauritania and dipped from Nigeria to Sierra Leone, with the inverse pattern observed for diffuse PAR. Hotspots of high absorption, particulate backscattering, elevated aerosol optical depth, and remote sensing reflectance all pointed to substantial particulate matter concentrations. The Microplastic Vulnerability Index (MVI) identifies the coastal stretch from Nigeria to Guinea-Bissau as highly vulnerable to microplastic accumulation due to conditions that favor buildup. In contrast, moderate vulnerability was observed from Guinea-Bissau to Senegal and in Mauritania, where conditions were less extreme, such as higher offshore temperatures that could promote widespread microplastic suspension and cooler nearshore temperatures that favor sedimentation. Increased turbulence and temperatures in coastal areas of Senegal and Mauritania may enhance microplastic transport and impact marine life. In Nigeria, stable coastal conditions-characterized by consistent temperatures, low turbulence, and uniform salinity-may lead to increased persistence and accumulation of microplastics in sensitive habitats like mangroves and coral reefs. These findings highlight the need for region-specific management strategies to address microplastic pollution and effectively protect marine ecosystems.

Sustainability-inspired upcycling of plastic waste into porous carbon nanobulks for water decontamination via peroxymonosulfate activation

"White pollution" is regarded as one of the most serious problems in the natural environment. Thus greener recycling of plastic waste has attracted significant efforts in recent research. In this study, to kill two birds with one stone, a series of porous carbon nanobulks (PCNs) were synthesized from the pyrolysis of plastic waste (polyethylene terephthalate, PET) and inorganic salt (including NaHCO3, Na2CO3, NaCl, and ZnCl2) for sulfadiazine (SDZ) degradation via peroxymonosulfate (PMS) activation. PCNs-1 (co-calcinated from PET and NaHCO3) with a large number of CO and COOH active sites, which were in favor of PMS activation and electron transfer during the catalytic process, had shown the best catalytic activity for SDZ degradation. Significantly, PCNs-1 exhibited excellent universality, adaptability, and stability. The degradation pathways of SDZ were identified by the total content of organic carbon (TOC), and high-resolution mass spectrometry (HR-MS). The possible mechanism was proposed according to the anion effect, quenching experiments, electron paramagnetic resonance (EPR), and electrochemical analysis, indicating that radical (OH, SO4-, O2-) and non-radical (1O2 and e) species were the catalytically active species for SDZ decomposition in the PCNs-1/PMS system. Moreover, Ecological Structure-Activity-Relationship Model (ECOSAR) program and wheat seed cultivation experiments clearly demonstrated that the biotoxicity of SDZ could be effectively reduced by the PCNs-1/PMS system. Here we successfully upcycled plastic waste into high-value materials for efficient water decontamination.

Seasonal change in fate and transport of plastics from Red River to the coast of Vietnam

A Lagrangian-particle tracking model, Delft3D-PART, combined with hydrodynamics models are used to investigate the fate and transport of buoyant plastics from Ba Lat river mouth in Red River Delta, northern Vietnam. It was found that during the dry season (Dec-Feb), 23 % (26.43 ton) of the plastics reached the shoreline while 76.1 % (68.3 ton) moved towards the coast further south of Red River Delta. During the wet season (Jun-Aug), 42 % (56.3 ton) were transported offshore away from the coast and 20 % (26.43 ton) distributed along the shore. The two bays adjacent to the river mouth are major hotspots with the intensity skewed towards the upwind side relative to the seasonal monsoon. This phenomenon is exacerbated by storm events which reverse the typical transport and lead to formation of hotspots at the upwind side of the plastic source. Guidance of model results for targeted cleanup operations is discussed.

Quantification of additives in beached plastic debris from Aotearoa New Zealand

Plastics have become an essential part of modern society. Their properties can be easily manipulated by incorporating additives to impart desirable attributes, such as colour, flexibility, or stability. However, many additives are classified as hazardous substances. To better understand the risk of plastic pollution within marine ecosystems, the type and concentration of additives in plastic debris needs to be established. We report the quantification of thirty-one common plastic additives (including plasticisers, antioxidants, and UV stabilisers) in beached plastic debris collected across Aotearoa New Zealand. Additives were isolated from the plastic debris by solvent extraction and quantified using high-resolution liquid chromatography-mass spectrometry. Twenty-five of the target additives were detected across 200 items of debris, with plasticisers detected at the highest frequency (99 % detection frequency). Additives were detected in all samples, with a median of four additives per debris item. A significantly higher number of additives were detected per debris item for polyvinyl chloride (median = 7) than polyethylene or polypropylene (median = 4). The additives bis(2-ethylhexyl) phthalate, diisononyl phthalate, diisodecyl phthalate, and antioxidant 702 were detected at the highest concentrations (up to 196,930 μg/g). The sum concentration of additives per debris item (up to 320,325 μg/g) was significantly higher in polyvinyl chloride plastics (median 94,716 μg/g) compared to other plastic types, primarily due to the presence of phthalate plasticisers. Non-target analysis was consistent with the targeted analysis, indicating a higher number and concentration of additives in polyvinyl chloride debris items compared to all other polymer types. Feature identification indicated the presence of more additives than previously detected in the targeted analysis, including plasticisers (phthalate and non-phthalate), processing aids, and nucleating agents. This study highlights phthalates and polyvinyl chloride as key targets for consideration in ecotoxicology and risk assessments, and the development of policies to reduce the impacts of plastic pollution.

Binding between Cu2+/Zn2+ and aged polyethylene and polyethylene terephthalate microplastics in swine wastewaters: Adsorption behavior, and mechanism insights

Microplastics (MPs) have aroused growing environmental concerns due to their biotoxicity and vital roles in accelerating the spread of toxic elements. Illuminating the interactions between MPs and heavy metals (HMs) is crucial for understanding the transport and fate of HM-loaded MPs in specific environmentally relevant scenarios. Herein, the adsorption of copper (Cu2+) and zinc (Zn2+) ions over polyethylene (PE) and polyethylene terephthalate (PET) particulates before and after heat persulfate oxidation (HPO) treatment was comprehensively evaluated in simulated and real swine wastewaters. The effects of intrinsic properties (i.e., degree of weathering, size, type) of MPs and environmental factors (i.e., pH, ionic strength, and co-occurring species) on adsorption were investigated thoroughly. It was observed that HPO treatment expedites the fragmentation of pristine MPs, and renders MPs with a variety of oxygen-rich functional groups, which are likely to act as new active sites for binding both HMs. The adsorption of both HMs is pH- and ionic strength-dependent at a pH of 4-6. Co-occurring species such as humic acid (HA) and tetracycline (TC) appear to enhance the affinity of both aged MPs for Cu2+ and Zn2+ ions via bridging complexation. However, co-occurring nutrient species (e.g., phosphate and ammonia) demonstrate different impacts on the adsorption, improving uptake of Cu2+ by precipitation while lowering affinity for Zn2+ owing to the formation of soluble zinc-ammonia complex. Spectroscopic analysis indicates that the dominant adsorption mechanism mainly involves electrostatic interactions and surface complexation. These findings provided fundamental insights into the interactions between aged MPs and HMs in swine wastewaters and might be extended to other nutrient-rich wastewaters.

Microplastics in faeces of European shags Gulosus aristotelis in central Norway

Plastic pollution is an increasing problem in the marine environment, and microplastics are frequently ingested by wildlife, including seabirds. Faeces are an increasingly used matrix to quantify egested microplastics. We investigated microplastics in 36 faeces samples from chicks of European shags (Gulosus aristotelis) sampled at Sklinna, central Norway in 2021. Small particles <300 μm (62 %) dominated the material. Out of 465 particles measured with Raman spectroscopy, 32 were identified as microplastics (21 fragments, 4 fibres). 69.4 % of faecal samples contained microplastics, with on average 17 microplastic particles per g faeces dry weight. Sixteen of the 36 samples originated from siblings sampled within the same hour, and plastic loads of these samples were more similar to each other compared to those from other individuals. This suggests that a sample from one chick is representative for all siblings at a given moment in time and proofs parental transfer of MP.

Microplastic Leachate Negatively Affects Fertilization in the Coral Montipora capitata

Microplastic pollution is an emerging stressor of concern to coral reef ecosystems, which are already threatened by additional global and local level anthropogenic stressors. The effects of ingesting microplastics alone on corals have been well studied, but the effects of the chemical composition of these particles have been understudied. Many microplastic-associated chemicals are endocrine disrupters potentially posing a threat to organismal reproduction. Therefore, the goal of this study was to determine if differences exist between the effects of microplastics themselves and microplastic leachate on Montipora capitata fertilization due to changes in fatty acid quantity and composition. Assays were conducted two years in a row which exposed M. capitata gamete bundles to either one of four types of recently manufactured, virgin microspheres (nylon, polypropylene, high-density polyethylene, or low-density polyethylene) at three concentrations (50, 100, or 200 particles/L) or microplastic leachates, presumably including plastic additives from these microspheres. Gamete fertilization was not impacted by microplastic particles themselves, but some of the microplastic leachate treatments with the same polymer type significantly reduced fertilization rates for M. capitata. Additionally, a total of 17 fatty acids were seen in both years, but neither fatty acid quantity nor composition correlated with observed declines in fertilization. Instead, fertilization and fatty acid data independently varied by concentration and polymer type, likely due to the presence of different chemicals. This study is the first to directly test the toxicity of microplastic leachate to coral reproduction. These findings show that microplastic-associated chemicals are an important stressor affecting successful coral fertilization and fatty acid quantity and composition and provide evidence for the negative effects of microplastic leachate to coral reproduction. Thus, plastic additives could pose an additional threat to coral replenishment and persistence in coral reef ecosystems.

The threat of microplastics and microbial degradation potential; a current perspective

Microplastics in marine environments come from various sources, and over the years, their buildup in marine environments suggests an inevitable need for the safe mitigation of plastic pollution. Microplastics are one of the chief and hazardous components of marine pollution, as they are transferred through the food chain to different trophic levels, affecting living organisms. They are also a source of transfer for pathogenic organisms. Upon transfer to humans, several toxic effects can occur. This review aims to assess the accumulation of microplastics in marine environments globally, the threat posed to humans, and the biodegradation potential of bacteria and fungi for future mitigation strategies. The versatility of bacteria and fungi in the biodegradation of different types of plastics has been discussed, with a focus on the microbial majority that has been cultivated in labs from the marine environment. We also propose that the exploration of yet-to-be-cultivated microbial majority can be a way forward for employing future strategies to mitigate microplastics.

The whole life journey and destination of microplastics: A review

Recent reports indicate that ubiquitous microplastics (MPs) in the environment can infiltrate the human body, posing significant health risks and garnering widespread attention. However, public understanding of the intricate processes through which microplastics are transferred to humans remains limited. Consequently, developing effective strategies to mitigate the escalating issue of MPs pollution and safeguard human health is still challenging. In this review, we elucidated the sources and dynamic migration pathways of MPs, examined its complex interactions with other pollutants, and identified primary routes of human exposure. Subsequently, the events and alterations of gut microbiota, gut microbiota metabolism, and intestinal barrier after MPs enter the gut of organisms are unclosed. Additionally, it highlighted the ease with which MPs translocate from the intestine to other organs along with their biological toxicities. Finally, we also emphasized the knowledge gaps in the current research field and proposes future research directions. This review aims to enhance public awareness regarding microplastic pollution and provide valuable references for forthcoming research endeavors as well as policy formulation related to this pressing issue.

A settling velocity formula for irregular shaped microplastic fragments based on new shape factor: Influence of secondary motions

Microplastic (MP) fragments are prevalent in rivers and lakes and cause considerable pollution in natural water environments. Determining the settling velocity of microplastic fragments is crucial for predicting their migration and fate in aquatic systems. Predicting the settling velocity of MP fragments is challenging because of their complex and variable geometries and the uncertainties associated with secondary motions. To better understand the secondary motions of irregular MP fragments, a numerical model was developed to study the entire settling process, and an experiment was conducted to validate the numerical model. The model results showed the temporal changes in the settling velocity and orientation of MP fragments during the settling process. The MP fragments were classified according to their shape factors into fragments undergoing stable, transitional, and oscillating settling on the basis of velocity fluctuations caused by secondary motions. To describe the shape of irregular MP fragments appropriately, a new irregular shape factor (ISF) was derived by performing a theoretical analysis of forces and demonstrated to be more suitable than the Corey shape factor (CSF) for irregular MP fragments exhibiting considerable secondary motions. The settling velocity data were fitted to obtain an explicit settling velocity formula that includes the ISF for irregular MP fragments. Compared with machine learning methods and existing formulas, the proposed formula provides more accurate predictions of the settling velocity for irregular MP fragments.

Interactive effects of microplastics and cadmium on soil properties, microbial communities and bok choy growth

The simultaneous presence of microplastics (MPs) and cadmium (Cd) in soil environments has raised concerns regarding their potential interactive effects on soil-plant ecosystems. This study explores how polyethylene (PE) at concentrations of 0.5 % (w/w), 1 % (w/w), and 2 % (w/w), and Cd at concentrations of 3 mg kg-1 and 12 mg kg-1, either alone or combined, impact soil physicochemical properties, microbial community structures, and bok choy growth through a 40-day pot experiment. Our findings reveal that the addition of 2 % (w/w) PE significantly increased soil organic carbon (SOC). However, when 2 % PE coexisted with Cd, SOC levels decreased, potentially due to a reduction in enzyme activity (β-1,4-glucosidase). PE increased the proportion of 1-2 mm soil aggregates, while the coexistence of 2 % PE and Cd significantly increased the content of soil aggregates larger than 2 mm. The coexistence of PE and Cd increased available potassium (AK) in the soil by approximately 13 % to 41 %. Regarding bok choy growth, the aboveground biomass under 2 % PE was approximately 210 % of that under 0.5 % PE, possibly because of the enhancement in soil nutrients. The presence of Cd, however, reduced the chlorophyll content of bok choy by approximately 18 % to 34 %. Notably, the coexistence of high PE concentration (2 % w/w) and low Cd concentration (3 mg kg-1) resulted in the highest aboveground biomass among all coexistence treatments. Furthermore, the addition of PE and Cd significantly altered the structure of soil bacterial and fungal communities, with fungi showing a greater response. Bacteria were significantly associated with soil inorganic N content and plant growth. This study provides new insights into the interactions of microplastics and Cd within microbial-soil-plant systems.

Review of microplastics and chemical risk posed by plastic packaging on the marine environment to inform the Global Plastics Treaty

Plastic overproduction and the resulting increase in consumption has made plastic pollution ubiquitous in all ecosystems. Recognizing this, the United Nations (UN) has started negotiations to establish a global treaty to end plastic pollution, especially in the marine environment. The basis of the treaty has been formulated in terms of turning off the tap, signaling the will to prevent plastic pollution at its source. Based on the distribution of plastic production by sector, the plastic packaging sector consumes the most plastic. The volume and variety of chemicals used in plastic packaging, most of which is single-use, is a major concern. Single-use plastics including packaging is one of the most dominant sources of plastic pollution. Plastic waste causes pollution in water, air and soil by releasing harmful chemicals into the environment and can also lead to exposure through contamination of food with micro- and nano-plastic particles and chemicals through packaging. Marine life and humans alike face risks from plastic uptake through bioaccumulation and biomagnification. While the contribution of plastics ingested to chemical pollution is relatively minor in comparison to other pathways of exposure, the effect of plastic waste on marine life and human consumption of seafood is beyond question. To reduce the long-term impact of plastic, it is crucial to establish a global legally binding instrument to ensure the implementation of upstream rather than downstream solutions. This will help to mitigate the impact of both chemicals and microplastics, including from packaging, on the environment.

In vitro and in vivo effects of commercial and environmental microplastics on Unio delicatus

Microplastics (MPs) are ubiquitous pollutants in freshwater environments. In this study, freshwater mussels, Unio delicatus, were exposed to both environmental MPs (e-MP) and commercial MPs (c-MP) that include green fluorescent MP (gf-MP), polyethylene (c-PE) and polystyrene (c-PS) at environmental concentrations (5 mg/L and 50 mg/L) over duration of 7 and 30 days. According to in vivo experiment results, both e-MPs and c-MPs induced significant changes in the total hemocyte counts of mussels (p < 0.05). Exposure to high concentrations of e-MPs and c-MPs for 7 days led to decreased cellular glutathione levels in the mussels, while exposure to low concentrations of e-MPs and c-PS for 7 days resulted in increased advanced oxidation protein products (AOPP). Mussels exposed to high concentrations of e-MPs for 30 days exhibited decreases in both glutathione levels and AOPP values. Although no damage was observed in tissues other than gills and digestive gland, histopathological alterations were observed in these tissues following exposure to 50 mg/L c-MPs. Additionally, MPs were observed in the intestine tissues. In vitro experiments using the MTT assay showed no significant difference in cell viability between the MP-exposed group and the control group at tested concentrations, with no observed dose-response relationship (p > 0.05). Nevertheless, certain cells exhibited signs of cell death, such as disrupted cellular structures, condensed nuclei, and loss of cellular integrity. These observations were consistent with mechanical compression, indicating that physical contact with MPs may result in cell damage or death. These findings demonstrate that environmentally relevant concentrations of MPs have toxic effects on freshwater mussels and multiple parameters provide valuable insight for the evaluation of health risks of organisms.

A multidisciplinary perspective on the role of plastic pollution in the triple planetary crisis

In this perspective paper, we discuss the negative impacts of plastics and associated chemicals on the triple planetary crisis of environmental pollution, climate change and biodiversity loss from a multidisciplinary perspective. Plastics are part of the pollution crisis, threatening ecosystems and human health. They also impact climate change and accelerate biodiversity loss; in this, they aggravate the triple planetary crisis. We analyze the scientific state-of-the-art to identify critical knowledge gaps regarding the life cycle, release, fate, exposure, hazard and governance of plastics and associated chemicals, as well as links to climate change and biodiversity loss. Based on the outcome, we derive key research needs for a comprehensive hazard assessment of plastics and associated chemicals, amongst others, to address the largely missing regulation of plastic additives and in-use plastics. We offer a holistic perspective bridging disciplinary expertise from natural and social sciences to achieve effective plastic governance and risk management of plastics and associated chemicals that protect the Earth, its ecosystems and human health from the plastics crisis.

Polystyrene nanoplastics alter intestinal toxicity of 2,4-DTBP in a sex-dependent manner in zebrafish (Danio rerio)

Nanoplastics (NPs) and 2,4-di-tert-butylphenol (2,4-DTBP) are ubiquitous emerging environmental contaminants detected in aquatic environment. While the intestinal toxicity of 2,4-DTBP alone has been studied, its combined effects with NPs remain unclear. Herein, adult zebrafish were exposed to 80 nm polystyrene nanoplastics (PS-NPs) or/ and 2,4-DTBP for 28 days. With co-exposure of PS-NPs, impact of 2,4-DTBP on feeding capacity and intestinal histopathology was enhanced in males while attenuated in females. Addition of PS-NPs significantly decreased the uptake of 2,4-DTBP in females, while the intestinal concentrations of 2,4-DTBP were not different between the sexes in co-exposure groups. Furthermore, lower intestinal pH and higher contents of digestive enzymes were detected in male fish, while bile acid was significantly increased in co-exposed females. In addition, co-exposure of PS-NPs stimulated female fish to remodel microbial composition to potentially enhance xenobiotics degradation, while negative Aeromonas aggravated inflammation in males. These results indicated that in the presence of PS-NPs, the gut microenvironment in females can facilitate the detoxification of 2,4-DTBP, while exaggerating toxiciy in males. Overall, this study demonstrates that toxicological outcomes of NPs-chemical mixtures may be modified by sex-specific physiology and microbiota composition, furthering understanding for environmental risk assessment and management of aquatic environments.

Rapid detection of microfibres in environmental samples using open-source visual recognition models

Microplastics, particularly microfibres (< 5 mm), are a significant environmental pollutant. Detecting and quantifying them in complex matrices is challenging and time-consuming. This study presents two open-source visual recognition models, YOLOv7 and Mask R-CNN, trained on extensive datasets for efficient microfibre identification in environmental samples. The YOLOv7 model is a new introduction to the microplastic quantification research, while Mask R-CNN has been previously used in similar studies. YOLOv7, with 71.4 % accuracy, and Mask R-CNN, with 49.9 % accuracy, demonstrate effective detection capabilities. Tested on aquatic samples from Seyðisfjörður, Iceland, YOLOv7 rapidly identifies microfibres, outperforming manual methods in speed. These models are user-friendly and widely accessible, making them valuable tools for microplastic contamination assessment. Their rapid processing offers results in seconds, enhancing research efficiency in microplastic pollution studies. By providing these models openly, we aim to support and advance microplastic quantification research. The integration of these advanced technologies with environmental science represents a significant step forward in addressing the global issue of microplastic pollution and its ecological and health impacts.

Co-exposure to microplastics and soil pollutants significantly exacerbates toxicity to crops: Insights from a global meta and machine-learning analysis

Environmental contamination of microplastics (MPs) is ubiquitous worldwide, and co-contamination of arable soils with MPs and other pollutants is of increasing concern, and may lead to unexpected consequences on crop production. However, the overall implications of this combined effect, whether beneficial or detrimental, remain a subject of current debate. Here, we conducted a global meta and machine-learning analysis to evaluate the effects of co-exposure to MPs and other pollutants on crops, utilizing 3346 biological endpoints derived from 68 different studies. Overall, compared with control groups that only exposure to conventional soil contaminants, co-exposure significantly exacerbated toxicity to crops, particularly with MPs intensifying adverse effects on crop morphology, oxidative damage, and photosynthetic efficiency. Interestingly, our analysis demonstrated a significant reduction in the accumulation of pollutants in the crop due to the presence of MPs. In addition, the results revealed that potential adverse effects were primarily associated with crop species, MPs mass concentration, and exposure duration. Our study reaffirms the substantial consequences of MPs as emerging pollutants on crops within the context of integrated pollution, providing novel insights into improving sustainability in agro-ecosystems.

Bioaccessibility of plastic-related compounds from polymeric particles in marine settings: Are microplastics the principal vector of phthalate ester congeners and bisphenol A towards marine vertebrates?

Marine vertebrates are known to ingest significant amounts of microplastics (MPs). Once ingested, MPs might cause gastrointestinal injuries and serve as a path of harmful plastic components, such as phthalate esters (PAEs) and bisphenol A (BPA) in the food chain. However, there is a lack of standardized in-vitro methods capable of simulating fish uptake of chemicals from MPs in the environment as potential vectors of such contaminants. In this work, leaching and in-vitro oral bioaccessibility testing of PAEs and BPA from MPs were conducted batchwise using artificial seawater and gut fluids mimicking gastric, intestinal, and gastrointestinal compartments of marine vertebrates at physiological temperature. The environmental and physiologically relevant extraction tests were applied to medium-density polyethylene (PE) and polyvinyl chloride (PVC) certified reference materials containing eight PAEs of varying hydrophobicity, namely, dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate, benzylbutyl phthalate, diethylhexyl phthalate, di-n-octyl phthalate, diisononyl phthalate and diisodecyl phthalate, and BPA (only in PE) as MP surrogates with realistic analyte concentrations of additives for primary MPs. The analysis of the leachates/gut fluid extracts was performed via dilute-and-shoot by ultra-high performance liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Only the most hydrophilic compounds, i.e. DMP, DEP and BPA, were found to get released significantly in saline waters, and exhibited the highest oral bioaccessibility rates (34-83 %). Based on our results, a dual-compartment physiologically relevant gastrointestinal test is recommended for appropriate estimation of fish bioaccessibility. The fish daily intakes of DMP, DEP and BPA from MPs, and seawater ingestion as well were estimated using several contamination scenarios (10th percentile as the low level, 50th percentile as the medium level and 90th percentile as the high level) based on probabilistic distributions and cumulative probability curves of measured environmental concentrations of (i) MPs in seawater throughout the world, (ii) DMP, DEP and BPA in beached MPs and those sampled in the open ocean (including both incurred and adsorbed contaminants), and (iii) DMP, DEP and BPA in seawater as reported in recent literature. Under a medium-level concentration scenario (50th percentile) in marine settings, and taking the gastrointestinal bioaccessibility factor into account, the daily intake of DMP, DEP and BPA from MPs accounted for a mere 0.02 % of the waterborne contribution. Hence, the ingestion of MPs should not be considered the primary route of fish exposure to BPA and the most polar PAEs in marine environments. However, more studies on the local and the global scales for mass concentrations of MPs and additives in marine settings are needed for further confirmation of our findings.

Phosphorus recovery via struvite crystallization in batch and fluidized-bed reactors: Roles of microplastics and dissolved organic matter

Struvite crystallization, a promising technology for nutrient recovery from wastewater, is facing considerable challenges due to the presence of emerging contaminants such as microplastics (MPs) ubiquitously found in wastewater. Here, we investigate the roles of MPs and humic acid (HA) in struvite crystallization in batch and fluidized-bed reactors (FBRs) using synthetic and real wastewater with a Mg:N:P molar ratio of 1:3:(1-1.3) at an initial pH of 11. Batch reactor (BR) experiment results show that MPs expedited the nucleation and growth rates of struvite (e.g., the rate of crystal growth in the presence of 30 mg L-1 of polyethylene terephthalate (PET) was 1.43 times higher than that in the blank system), while HA hindered the formation of struvite. X-ray diffraction and the Rietveld refinement analysis revealed that the presence of MPs and HA can result in significant changes in phase compositions of the reclaimed precipitates, with over 80 % purity of struvite found in the precipitates from suspensions in the presence of 30 mg L-1 of MPs. Further characterizations demonstrated that MPs act as seeds of struvite nucleation, spurring the formation of well-defined struvite, while HA favors the formation of newberyite rather than struvite in both reactors. These findings highlight the need for a more comprehensive understanding of the interactions between emerging contaminants and struvite crystallization processes to optimize nutrient recovery strategies for mitigating their adverse impact on the quality and yield of struvite-based fertilizers. ENVIRONMENTAL IMPLICATION: The presence of microplastics in wastewater poses a significant challenge to struvite crystallization for nutrient recovery, as it accelerates nucleation and growth rates of struvite crystals. This can lead to changes in the phase compositions of the reclaimed precipitates, with implications for the quality and yield of struvite-based fertilizers. Additionally, the presence of humic acid hinders the formation of struvite, favoring the formation of other minerals like newberyite. Understanding the interactions between emerging contaminants and struvite crystallization processes is crucial for optimizing nutrient recovery strategies and mitigating the environmental impact of these contaminants on water quality and struvite-based fertilizers.

Orally Ingested Micro- and Nano-Plastics: A Hidden Driver of Inflammatory Bowel Disease and Colorectal Cancer

Micro- and nano-plastics (MNPLs) can move along the food chain to higher-level organisms including humans. Three significant routes for MNPLs have been reported: ingestion, inhalation, and dermal contact. Accumulating evidence supports the intestinal toxicity of ingested MNPLs and their role as drivers for increased incidence of colorectal cancer (CRC) in high-risk populations such as inflammatory bowel disease (IBD) patients. However, the mechanisms are largely unknown. In this review, by using the leading scientific publication databases (Web of Science, Google Scholar, Scopus, PubMed, and ScienceDirect), we explored the possible effects and related mechanisms of MNPL exposure on the gut epithelium in healthy conditions and IBD patients. The summarized evidence supports the idea that oral MNPL exposure may contribute to intestinal epithelial damage, thus promoting and sustaining the chronic development of intestinal inflammation, mainly in high-risk populations such as IBD patients. Colonic mucus layer disruption may further facilitate MNPL passage into the bloodstream, thus contributing to the toxic effects of MNPLs on different organ systems and platelet activation, which may, in turn, contribute to the chronic development of inflammation and CRC development. Further exploration of this threat to human health is warranted to reduce potential adverse effects and CRC risk.

Adsorption performance of nanoplastics in carbon filtration column

Nanoplastics (NPs) are usually formed by the decomposition of large plastics, which will cause water pollution after entering the water body. Carbon filter column is used to adsorb and remove polystyrene nanoparticles (PSNPs). The influence of experimental conditions on adsorption was investigated and fitted by kinetic model. The results show that increasing the height of carbon filter column and decreasing the initial concentration of PSNPs and water flow rate can prolong the breakthrough time of carbon filter column. When the initial concentration of PSNPs is 0.8 mg L-1, the influent flow rate is 4 mL min-1 and the height of carbon filter bed is 8.5 cm, the removal effect is the best, and the depletion point of carbon filter column is extended to 48 h. Adams-Bohart model is suitable for describing the initial stage of adsorption. Thomas and Yoon-Nelson models can well describe the whole dynamic adsorption process of PSNPs, and Yoon-Nelson model can accurately predict the time required for 50% PSNPs to penetrate the carbon column. The adsorption mechanism of NPs by carbon filter column is mainly through the attachment sites and pore retention provided by particles on the surface of activated carbon. This study can provide new technical and theoretical support for the removal of NPs.

Aging properties of polyethylene and polylactic acid microplastics and their adsorption behavior of Cd(II) and Cr(VI) in aquatic environments

In this study, we examined the aging characteristics of polyethylene (PE) and polylactic acid (PLA) microplastics (MPs), examining the adsorption behaviors and mechanisms concerning Cd(II) and Cr(VI) under both single and binary systems. The results revealed that aging treatment changed the physicochemical properties of MPs. The aging mechanisms of PLA and PE MPs were shown to be similar by the 2D-FTIR-COS study. These mechanisms involve the formation of oxygen-containing functional groups through the combination of carbon chain breakdown and oxygen. Aged MPs had a greater ability to adsorb metal ions than pristine MPs, with PLA MPs outperforming PE MPs. After 30 days of aging, Cd(II) adsorption increased by 40.61 % and 25.49 % for PE and PLA MPs, respectively, while Cr(VI) adsorption increased by 37.50 % and 69.29 %, respectively. The adsorption ability of PE and PLA MPs with Cd(II) or Cr(VI) under binary systems was less than that under single systems, with Cd(II) exhibiting more adsorption competitiveness than Cr(VI). Humic acid (HA), ionic species and strength, solution pH, and adsorption of Cd(II) and Cr(VI) were found to be significantly correlated. Further investigation into the adsorption mechanisms of Cd(II) and Cr(VI) on PE and PLA MPs revealed that pore-filling, electrostatic interactions, complexation, and hydrogen bonding play important roles in the adsorption process. The study's conclusions are crucial for assessing the risk associated with concurrent contamination by metal ions and microplastics.

Traversing the prevalence of microplastics in soil-agro ecosystems: Origin, occurrence, and pollutants synergies

The ubiquity of plastics in modern life has made them a significant environmental concern and a marker of the Anthropocene era. The degradation of plastics results in the formation of microplastics (MPs), which measure 5 mm or less. The coexistence of MPs with other pollutants found in sludge, water treatment plant effluents, surface water, and groundwater, shapes the environmental landscape together. Despite extensive investigation, the long-term implications of MPs in soils remain uncertain, underscoring the importance of delving into their transportation and interactions with soil biota and other contaminants. The present article provides a comprehensive overview of MPs contamination in soil, encompassing its sources, prevalence, features, and interactions with soil flora and fauna, heavy metals, and organic compounds. The sources of MPs in soil agroecosystems are mulching, composting, littering, sewage sludge, irrigation water, and fertilizer application. The concentration of MPs reported in plastic mulch, littering, and sewage sludge is 503 ± 2760 items per kg-1, 4483 ± 2315 MPs/kg, and 11,100 ± 570 per/kg. The transport of MPs in soil agroecosystems is due to their horizontal and vertical migration including biotic and abiotic mobility. The article also highlighted the analytical process, which includes sampling planning, collection, purification, extraction, and identification techniques of MPs in soil agroecosystems. The mechanism in the interaction of MPs and organic pollutants includes surface adsorption or adhesion cation bridging, hydrogen bonding, charge transfer, ligand exchange, van der Waals interactions, and ion exchange.

Distribution and effects of microplastics as carriers of heavy metals in river surface sediments

There are few studies on microplastics (MPs) in urban river sediments compared to oceans, soils, and even rivers. In this study, the seasonal abundance of MPs, as well as their influencing factors on heavy metal adsorption in river sediments of the Ancient Canal of Zhenjiang City, China, were investigated for the first time. Through on-site sampling, microscopic observation, Raman spectroscopy, scanning electron microscopy, and high-temperature digestion, the abundance, shape, color, particle size, type, and surface characteristics of MPs in Ancient Canal sediments in different seasons, as well as the influencing factors of MPs as heavy metal carriers in different seasons, were analyzed. The results showed that the average abundance of MPs is 2049.09 ± 883.78 and 2216.36 ± 826.21 items kg-1 dry sediments in summer and winter, respectively, and different sites change significantly. In addition, particle sizes, types, colors, and shapes of MPs exhibited seasonal variations. Four MPs shapes were mainly observed: fibers, fragments, particles, and films. Among them, MPs in summer sediments are mainly fiber, and MPs in winter sediments are mainly particles. In the sediment in summer and winter, transparent MPs and small-size (<0.5 mm) MPs are the main ones, where the abundance of MPs decreased with increasing MPs size. The main MPs species are polyvinyl chloride (PVC), polystyrene (PS), polypropylene (PP), polyethylene terephthalate (PET), polycarbonate (PC), and polyethylene (PE), with PP being the predominant MPs in the sediments in different seasons. Scanning electron microscopy-energy dispersive spectrometer (SEM-EDS) revealed that the surfaces of the MPs were characterized by rough, porous, cracked, and torn, with the attachment of various heavy metal elements, and all of the heavy metal elements accumulated to different degrees on the MPs. There was a significant positive correlation (p < 0.05) between the Mn content in the MPs and the Mn content in the sediments in winter, suggesting that the Mn in the MPs in winter may be derived from the sediments. In addition, the type, shape, size, and color of MPs affect the adsorption capacity of heavy metals. Most of the adsorption of MPs on Pb showed a significant negative correlation, and the adsorption of MPs on Cr, Zn, Cu, Cd, and Mn showed a significant positive correlation. MPs can be used as carriers of heavy metals, which will further enhance the hazards of living organisms and pose a potential threat to the safety of the urban river environment.

Micro- and Nanoplastics Produced from Textile Finishes: A Review

The problem of increasing plastic pollution has emerged as a significant societal issue. Plastics can originate from various sources, and there is growing concern among researchers to study and investigate this new category of pollution. The plastic waste is found at the macro, micro, and nanoscale, and its study has had great significance according to the perspective of posing hazardous impacts on living organisms. Given the high demand for functional textiles, the textile industries are supporting the coating of different polymeric based finishes on the surface of textile products. The plastic debris emitted from these coated finishes are in the ranges of nanometric scale, so-called polymeric nanoplastics (PNPs). With the new terminology, polymeric nanoplastics (PNPs) released from textile finishes or coatings are being increasingly mentioned, and the term fibrous microplastics (FMPs) can be seen as outdated. This study is based on an intensive review of a very novel category of debris plastics (PNPs) mostly produced from textile finishes or coatings. In fact, FMPs and PNPs released from synthetic textiles and textiles coated with plastic-based finishes during washing activities are considered to be a major cause that contributes to the current overall load of microplastics (MPs) in the environment. A link between the concentration of NPs from textile fibers and NPs from textile polymeric-based coatings in freshwater and sediments within a particular local setting and the extent of activities of the textile industry has been demonstrated. Invested efforts have been paid to consider and concentrate on plastic pollution (nanoplastics from textile polymeric coatings). We also summarize existing methodologies to elucidate the identification and proactive quantification of nanoplastics shed from the textile polymeric coatings. To this end, more than 40 studies have been done to identify the physical, chemical, and mechanical parameters and to characterize nanoplastics.

New insights into the impact of leachates from in-field collected plastics on aquatic invertebrates and vertebrates

The impact of leachates from micronized beached plastics of the Mediterranean Sea and Atlantic Ocean on coastal marine ecosystems was investigated by using a multidisciplinary approach. Chemical analysis and ecotoxicological tests on phylogenetically distant species were performed on leachates from the following plastic categories: bottles, pellets, hard plastic (HP) containers, fishing nets (FN) and rapido trawling rubber (RTR). The bacteria Alivibrio fischeri, the nauplii of the crustaceans Amphibalanus amphitrite and Acartia tonsa, the rotifer Brachionus plicatilis, the embryos of the sea urchin Paracentrotus lividus, the ephyrae of the jellyfish Aurelia sp. and the larvae of the medaka Oryzias latipes were exposed to different concentrations of leachates to evaluate lethal and sub-lethal effects. Thirty-one additives were identified in the plastic leachates; benzophenone, benzyl butyl phthalate and ethylparaben were present in all leachates. Ecotoxicity of leachates varied among plastic categories and areas, being RTR, HP and FN more toxic than plastic bottles and pellets to several marine invertebrates. The ecotoxicological results based on 13 endpoints were elaborated within a quantitative weight of evidence (WOE) model, providing a synthetic hazard index for each data typology, before their integrations in an environmental risk index. The WOE assigned a moderate and slight hazard to organisms exposed to leachates of FN and HP collected in the Mediterranean Sea respectively, and a moderate hazard to leachates of HP from the Atlantic Ocean. No hazard was found for pellet, bottles and RTR. These findings suggest that an integrated approach based on WOE on a large set of bioassays is recommended to get a more reliable assessment of the ecotoxicity of beached-plastic leachates. In addition, the additives leached from FN and HP should be further investigated to reduce high concentrations and additive types that could impact marine ecosystem health.

The effect of different types of microplastic and acute cadmium exposure on the Mytilus galloprovincialis (Lamarck, 1819)

Microplastic (MP) pollution is a pressing issue for both environmental health and the safety of human food sources. This study provides a comprehensive analysis of the effects of MPs on Mediterranean mussels (Mytilus galloprovincialis, Lamarck 1819), focusing on the food safety risks associated with MP and cadmium (Cd) exposure in these organisms intended for consumption. The retention of different polymer types of MPs in mussels was specifically evaluated, and the influence of Cd on MP retention across these polymers was investigated. Mussels were exposed to polystyrene (PS), polypropylene (PP), and polyethylene terephthalate (PET) MPs individually and in combination with the toxic metal Cd for a duration of 7 days. Antioxidant enzymes, oxidative stress parameters, and digestive system enzyme activities, selected as biomarkers for Cd and MPs pollution, were assessed. Furthermore, human consumption risk evaluations and limits regarding mussel intake were analysed in terms of food safety. The results suggest that exposure to Cd, MPs, or their combination induces oxidative stress, tissue damage, and neurotoxicity. Alterations in digestive enzyme activities could impact the mussels' energy acquisition from food and their capacity to conserve energy reserves. The estimated daily intake (EDI), provisional tolerable weekly intake (PTWI), target hazard quotient (THQ), and target cancer risk (TCR) levels for all groups surpassed established limits, implying a significant health risk for humans consuming these products. These results underscore the potential health risks for humans associated with consuming mussels exposed to Cd and/or MPs and provide valuable data for monitoring pollution levels and ecological risks in aquatic organisms. Additionally, our findings reveal that the retention of Cd in mussel tissues varies significantly after exposure, with combinations of PET and Cd showing lower levels of Cd accumulation compared to other groups, suggesting a differential interaction that influences Cd retention.

Research priorities on microplastics in marine and coastal environments: An Australian perspective to advance global action

Plastic and microplastic contamination in the environment receive global attention, with calls for the synthesis of scientific evidence to inform actionable strategies and policy-relevant practices. We provide a systematic literature review on microplastic research across Australian coastal environments in water, sediment and biota, highlighting the main research foci and gaps in information. At the same time, we conducted surveys and workshops to gather expert opinions from multiple stakeholders (including researchers, industry, and government) to identify critical research directions to meet stakeholder needs across sectors. Through this consultation and engagement process, we created a platform for knowledge exchange and identified three major priorities to support evidence-based policy, regulation, and management. These include a need for (i) method harmonisation in microplastic assessments, (ii) information on the presence, sources, and pathways of plastic pollution, and (iii) advancing our understanding of the risk of harm to individuals and ecosystems.

Interaction of microplastics with perfluoroalkyl and polyfluoroalkyl substances in water: A review of the fate, mechanisms and toxicity

It is well known that microplastics can act as vectors of pollutants in the environment and are widely spread in freshwater and marine environments. PFAS (perfluoroalkyl and polyfluoroalkyl substances) can remain in the aqueous environment for long periods due to their wide application and good stability. The coexistence of microplastics and PFAS in the aqueous environment creates conditions for their interaction and combined toxicity. Studies on adsorption experiments between them and combined toxicity have been documented in the literature but have not been critically summarized and reviewed. Therefore, in this review, we focused on the interaction mechanisms, influencing factors, and combined toxicity between microplastics and PFAS. It was found that surface complexation may be a new interaction mechanism between microplastics and PFAS. In addition, aged microplastics reduce the adsorption of PFAS due to the presence of oxygenated groups on the surface compared to virgin microplastics. Attached biofilms can increase the adsorption capacity and create conditions for biodegradation. And, the interaction of microplastics and PFAS affects their spatial and temporal distribution in the environment. This review can provide insights into the fate of microplastics and PFAS in the global aquatic environment, fill knowledge gaps on the interactions between microplastics and PFAS, and provide a basic reference for assessing their combined toxicity.

Effect of biochar on microplastics penetration treatment within soil porous medium under the wetting-drying cycles and optimisation of soil-biochar mixing format

Plant-based biochar was demonstrated promising capability in adsorbing microplastic particles (MPs) within soil porous mediums. However, biochar's function in mitigating MPs' vertical penetration during wetting-drying cycles, typical of seasonal precipitation and evaporation, remains uncertain. Furthermore, few studies have investigated the structures of how biochar combines with soil. This study conducted column tests to assess the MPs retention capabilities of soil-biochar porous media under saturated and wetting-drying conditions. The water retention and hydrophilic properties were investigated to elucidate the impact of wetting-drying cycles. Additionally, different biochar-soil structures were compared to optimise the structural design. Without biochar, wetting-drying cycles resulted in 8.74 % more MPs escaping from samples. However, incorporating 15 % biochar led to only around 2 % more MPs in effluent. Biochar significantly enhanced soil's MP absorption capacity and mitigated the negative effects of wetting-drying cycles. Biochar's alveolate morphology provides ample adsorption sites and creates complex flow paths. The hydrophilic groups of biochar and capillarity by micropores facilitated slower water release during drying, preventing crack propagation and flush on MP particles. This effect was more pronounced with higher biochar content and lower porosity. Moreover, layer structure was found to improve MPs removal, benefiting the long-term performance and management of the biochar functional layer.

Microplastic-derived dissolved organic matter: Generation, characterization, and environmental behaviors

Microplastics (MPs) represent a substantial and emerging class of pollutants distributed widely in various environments, sparking growing concerns about their environmental impact. In environmental systems, dissolved organic matter (DOM) is crucial in shaping the physical, chemical, and biological processes of pollutants while significantly contributing to the global carbon budget. Recent findings have revealed that microplastic-derived dissolved organic matter (MP-DOM) constitutes approximately 10 % of the DOM present on the ocean surface, drawing considerable attention. Hence, this study's primary objective is to explore, the generation, characterization, and environmental behaviors of MP-DOM. The formation and characteristics of MP-DOM are profoundly influenced by leaching conditions and types of MPs. This review delves into the mechanisms of the generation of MP-DOM and provides an overview of a wide array of analytical techniques, including ultraviolet-visible (UV-Vis) spectroscopy, fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), and mass spectroscopy, used to assess the MP-DOM characteristics. Furthermore, this review investigates the environmental behaviors of MP-DOM, including its impacts on organisms, photochemical processes, the formation of disinfection by-products (DBPs), adsorption behavior, and its interaction with natural DOM. Finally, the review outlines research challenges, perspectives for future MP-DOM research, and the associated environmental implications.

Plastics and plastic-bound toxic metals in municipal solid waste compost from Sri Lanka

This study examined plastics and toxic metals in municipal solid waste compost from various regions in Sri Lanka. Plastics were extracted using density separation, digested using wet peroxidation, and identified using Fourier Transform Infra-Red Spectroscopy in Attenuated Total Reflection mode. Compost and plastics were acid-digested to quantify total Cd, Cu, Co, Cr, Pb, and Zn concentrations and analyzed for the bioavailable fraction using 0.01 M CaCl2. Notably, plastics were highly abundant in most compost samples. The main plastic types detected were polyethylene, polypropylene, and cellophane. However, the average Cd, Cu, Co, Cr, Pb, and Zn levels were 0.727, 60.78, 3.670, 25.44, 18.95, and 130.7 mg/kg, respectively, which are well below the recommended levels. Zn was the most bioavailable (2.476 mg/kg), and Cd was the least bioavailable (0.053 mg/kg) metal associated with compost. The Contamination factor data show that there is considerable enhancement of Cd and Cu, however, Cr, Cu, Co, and Pb are at low contamination levels. Mean geo accumulation index values were 1.39, 1.07, - 1.06, - 0.84, - 0.32, and 0.08 for Cd, Cu, Co, Cr, Pb, and Zn. Therefore, the contamination level of compost samples with Cd and Cu ranges from uncontaminated to contaminated levels, whereas Co, Cr, Pb, and Zn are at uncontaminated levels. Despite no direct metal-plastic correlation, plastics in compost could harm plants, animals, and humans due to ingestion. Hence, reducing plastic and metal contamination in compost is crucial.

Trace metals coupled with plasticisers in microplastics strengthen the denitrification function of the soil microbiome in the Qinghai Tibetan Plateau

Due to the lack of research on the co-effects of microplastics and trace metals in the environment on nitrogen cycling-related functional microorganisms, the occurrence of microplastics and one of their plasticisers, phthalate esters, as well as trace metals, were determined in soils and river sediments in the Qinghai-Tibet Plateau. Relationship between microplastics and phthalate esters in the area was determined; the co-effects of these potentially toxic materials, and key factors and pathways affecting nitrogen functions were further explored. Significant correlations between fibre- and film-shaped microplastics and phthalate esters were detected in the soils from the plateau. Copper, lead, cadmium and di-n-octyl phthalate detected significantly affected nitrogen cycling-related functional microorganisms. The co-existence of di-n-octyl phthalate and copper in soils synergistically stimulated the expression of denitrification microorganisms nirS gene and "nitrate_reduction". Additionally, di-n-octyl phthalate and dimethyl phthalate more significantly affected the variation of nitrogen cycling-related functional genes than the number of microplastics. In a dimethyl phthalate- and cadmium-polluted area, nitrogen cycling-related functional genes, especially nirK gene, were more sensitive and stressed. Overall, phthalate esters originated from microplastics play a key role in nitrogen cycling-related functions than microplastics themselves, moreover, the synergy between di-n-octyl phthalate and copper strengthen the expression of denitrification functions.

Transforming pollution into solutions: A bibliometric analysis and sustainable strategies for reducing indoor microplastics while converting to value-added products

Microplastics (MPs), as emerging indoor contaminants, have garnered attention due to their ubiquity and unresolved implications for human health. These tiny particles have permeated indoor air and water, leading to inevitable human exposure. Preliminary evidence suggests MP exposure could be linked to respiratory, gastrointestinal, and potentially other health issues, yet the full scope of their effects remains unclear. To map the overall landscape of this research field, a bibliometric analysis based on research articles retrieved from the Web of Science database was conducted. The study synthesizes the current state of knowledge and spotlights the innovative mitigation strategies proposed to curb indoor MP pollution. These strategies involve minimizing the MP emission from source, advancements in filtration technology, aimed at reducing the MP exposure. Furthermore, this research sheds light on cutting-edge methods for converting MP waste into value-added products. These innovative approaches not only promise to alleviate environmental burdens but also contribute to a more sustainable and circular economy by transforming waste into resources such as biofuels, construction materials, and batteries. Despite these strides, this study acknowledges the ongoing challenges, including the need for more efficient removal technologies and a deeper understanding of MPs' health impacts. Looking forward, the study underscores the necessity for further research to fill these knowledge gaps, particularly in the areas of long-term health outcomes and the development of standardized, reliable methodologies for MP detection and quantification in indoor settings. This comprehensive approach paves the way for future exploration and the development of robust solutions to the complex issue of microplastic pollution.

Role of UV radiation and oxidation on polyethylene micro- and nanoplastics: impacts on cadmium sorption, bioaccumulation, and toxicity in fish intestinal cells

This study investigated the role of ultraviolet (UV) radiation and oxidation in high-density polyethylene microplastics (2-15 μm) and nanoplastics (0.2-9.9 μm) (NMPs) on particle chemistry, morphology, and reactivity with cadmium (Cd). Additionally, toxicity of NMPs alone and with Cd was evaluated using RTgutGC cells, a model of the rainbow trout (Oncorhynchus mykiss) intestine. The role on NMPs on Cd bioaccumulation in RTgutGC cells was also evaluated. Dynamic light scattering indicated that after UV radiation NPs agglomerated size increased from 0.8 to 28 µm, and to 8 µm when Cd was added. Oxidized MPs agglomerated size increased from 11 and 7 to 46 and 27 µm in non-UV- and UV-aged oxidized MPs when adding Cd, respectively. Cd-coated particles exhibited generally significantly higher zeta potential than non-Cd-coated particles, while attenuated total reflectance-Fourier transform infrared spectroscopy showed that the functional chemistry of the particles was oxidized and modified after being exposed to UV radiation. Presence of NMPs resulted in a significant decrease in Cd bioaccumulation in RTgutGC cells (100.5-87.9 ng Cd/mg protein) compared to Cd alone (138.1 ng Cd/mg protein), although this was not quite significant for co-exposures with UV-aged NPs (105.7 ng Cd/mg protein). No toxicity was observed in RTgutGC cells exposed to NMPs alone for 24 h. Moreover, co-exposures with Cd indicated that NMPs reduce the toxicity of Cd. Altogether these results show that UV aging enhances NMP surface reactivity, increasing Cd absorption in solution, which resulted in a reduction in Cd bioavailability and toxicity.

Environmental impact of microplastics and potential health hazards

Microscopic plastic (microplastic) pollutants threaten the earth's biodiversity and ecosystems. As a result of the progressive fragmentation of oversized plastic containers and products or manufacturing in small sizes, microplastics (particles of a diameter of 5 mm with no lower limit) are used in medicines, personal care products, and industry. The incidence of microplastics is found everywhere in the air, marine waters, land, and even food that humans and animals consume. One of the greatest concerns is the permanent damage that is created by plastic waste to our fragile ecosystem. The impossibility of the complete removal of all microplastic contamination from the oceans is one of the principal tasks of our governing body, research scientists, and individuals. Implementing the necessary measures to reduce the levels of plastic consumption is the only way to protect our environment. Cutting off the plastic flow is the key remedy to reducing waste and pollution, and such an approach could show immense significance. This review offers a comprehensive exploration of the various aspects of microplastics, encompassing their composition, types, properties, origins, health risks, and environmental impacts. Furthermore, it delves into strategies for comprehending the dynamics of microplastics within oceanic ecosystems, with a focus on averting their integration into every tier of the food chain.

Enhanced Cadmium Adsorption Dynamics in Water and Soil by Polystyrene Microplastics and Biochar

Microplastics (MPs) are prevalent emerging pollutants in soil environments, acting as carriers for other contaminants and facilitating combined pollution along with toxic metals like cadmium (Cd). This interaction increases toxic effects and poses substantial threats to ecosystems and human health. The objective of this study was to investigate the hydrodynamic adsorption of Cd by conducting experiments where polystyrene microplastics (PS) and biochar (BC) coexisted across various particle sizes (10 µm, 20 µm, and 30 µm). Then, soil incubation experiments were set up under conditions of combined pollution, involving various concentrations (0.5 g·kg-1, 5 g·kg-1, 50 g·kg-1) and particle sizes of PS and BC to assess their synergistic effects on the soil environment. The results suggest that the pseudo-second-order kinetic model (R2 = 0.8642) provides a better description of the adsorption dynamics of Cd by PS and BC compared to the pseudo-first-order kinetic model (R2 = 0.7711), with an adsorption saturation time of 400 min. The Cd adsorption process in the presence of PS and BC is more accurately modeled using the Freundlich isotherm (R2 > 0.98), indicating the predominance of multilayer physical adsorption. The coexistence of 10 µm and 20 µm PS particles with BC enhanced Cd absorption, while 30 µm PS particles had an inhibitory effect. In soil incubation experiments, variations in PS particle size increased the exchangeable Cd speciation by 99.52% and decreased the residual speciation by 18.59%. The addition of microplastics notably impacted the exchangeable Cd speciation (p < 0.05), with smaller PS particles leading to more significant increases in the exchangeable content-showing respective increments of 45.90%, 106.96%, and 145.69%. This study contributes to a deeper understanding of the mitigation mechanisms of biochar in the face of combined pollution from microplastics and heavy metals, offering theoretical support and valuable insights for managing such contamination scenarios.

Meta-analysis unravels the complex combined toxicity of microplastics and antibiotics in aquatic ecosystems

The aquatic ecosystem, a repository for various pollutants, has been identified as a crucial zone where microplastics (MPs) serve as vectors for antibiotics, facilitating their spread. Despite this, the influence of MPs on the toxicity of antibiotics remains a topic of debate. In this study, we conduct a global meta-analysis, examining 730 datasets from 29 laboratory studies. Our findings reveal that the impact of MPs on antibiotic toxicity is highly dependent on biological response pathways, microplastic concentration, antibiotic properties, and exposure time. We observed that MPs amplify the accumulation of antibiotics in aquatic organisms, significantly heightening their adverse effects on growth, development, and immune functions. Intriguingly, MPs appear to mitigate the reproductive toxicity caused by antibiotics. A notable inverse relationship was identified between antibiotic toxicity and microplastic concentration and exposure time. Furthermore, antibiotic concentration predominantly affects growth, development, and reproductive health, whereas exposure time is critical in determining antibiotic accumulation and immune-related toxicity. These insights underscore that microplastic co-exposure can modify the toxicological profile of antibiotics. The outcomes of this research enhance our comprehensive understanding of the intricate combined effects of MPs and antibiotics on aquatic life, emphasizing the necessity for informed scientific management of these emerging contaminants.

When antibiotics encounter microplastics in aquatic environments: Interaction, combined toxicity, and risk assessments

Antibiotics and microplastics (MPs), known as emerging pollutants, are bound to coexist in aquatic environments due to their widespread distribution and prolonged persistence. To date, few systematic summaries are available for the interaction between MPs and antibiotics in aquatic ecosystems, and a comprehensive reanalysis of their combined toxicity is also needed. Based on the collected published data, we have analyzed the source and distribution of MPs and antibiotics in global aquatic environments, finding their coexistence occurs in a lot of study sites. Accordingly, the presence of MPs can directly alter the environmental behavior of antibiotics. The main influencing factors of interaction between antibiotics and MPs have been summarized in terms of the characteristics of MPs and antibiotics, as well as the environmental factors. Then, we have conducted a meta-analysis to evaluate the combined toxicity of antibiotics and MPs on aquatic organisms and the related toxicity indicators, suggesting a significant adverse effect on algae, and inapparent on fish and daphnia. Finally, the environmental risk assessments for antibiotics and MPs were discussed, but unfortunately the standardized methodology for the risk assessment of MPs is still challenging, let alone assessment for their combined toxicity. This review provides insights into the interactions and environment risks of antibiotics and MPs in the aquatic environment, and suggests perspectives for future research.

Size dependent uptake and trophic transfer of polystyrene microplastics in unicellular freshwater eukaryotes

Microplastics (MP) have become a well-known and widely investigated environmental pollutant. Despite the huge amount of new studies investigating the potential threat posed by MP, the possible uptake and trophic transfer in lower trophic levels of freshwater ecosystems remains understudied. This study aims to investigate the internalization and potential trophic transfer of fluorescent polystyrene (PS) beads (0.5 μm, 3.6 × 108 particles/mL; 6 μm, 2.1 × 105 particles/mL) and fragments (<30 μm, 5 × 103 particles/mL) in three unicellular eukaryotes. This study focuses on the size-dependent uptake of MP by two freshwater Ciliophora, Tetrahymena pyriformis, Paramecium caudatum and one Amoebozoa, Amoeba proteus, serving also as predator for experiments on potential trophic transfer. Size-dependent uptake of MP in all three unicellular eukaryotes was shown. P. caudatum is able to take up MP fragments up to 27.7 μm, while T. pyriformis ingests particles up to 10 μm. In A. proteus, small MP (PS0.5μm and PS6μm) were taken up via pinocytosis and were detected in the cytoplasm for up to 14 days after exposure. Large PS-MP (PS<30μm) were detected in A. proteus only after predation on MP-fed Ciliophora. These results indicate that A. proteus ingests larger MP via predation on Ciliophora (PS<30μm), which would not be taken up otherwise. This study shows trophic transfer of MP at the base of the aquatic food web and serves as basis to study the impact of MP in freshwater ecosystems.

Microplastics and PAHs mixed contamination: An in-depth review on the sources, co-occurrence, and fate in marine ecosystems

Microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) are toxic contaminants that have been found in marine ecosystems. This review aims to explore the sources and mechanisms of PAHs and MPs mixed contamination in marine environments. Understanding the released sources of PAHs and MPs is crucial for proposing appropriate regulations on the release of these contaminants. Additionally, the mechanisms of co-occurrence and the role of MPs in distributing PAHs in marine ecosystems were investigated in detail. Moreover, the chemical affinity between PAHs and MPs was proposed, highlighting the potential mechanisms that lead to their persistence in marine ecosystems. Moreover, we delve into the various factors influencing the co-occurrence, chemical affinity, and distribution of mixed contaminants in marine ecosystems. These factors, including environmental characteristics, MPs properties, PAHs molecular weight and hydrophobicity, and microbial interactions, were critically examined. The co-contamination raises concerns about the potential synergistic effects on their degradation and toxicity. Interesting, few studies have reported the enhanced photodegradation and biodegradation of contaminants under mixed contamination compared to their individual remediation. However, currently, the remediation strategies reported for PAHs and MPs mixed contamination are scarce and limited. While there have been some initiatives to remove PAHs and MPs individually, there is a lack of research specifically targeting the removal of mixed contaminants. This deficiency highlights the need for further investigation and the development of effective remediation approaches for the efficient remediation of PAHs and MPs from marine ecosystems.

Desorption of Polycyclic Aromatic Hydrocarbons from Microplastics in Human Gastrointestinal Fluid Simulants-Implications for Exposure Assessment

Microplastics have been detected in various food types, suggesting inevitable human exposure. A major fraction may originate from aerial deposition and could be contaminated by ubiquitous pollutants such as polycyclic aromatic hydrocarbons (PAHs). While data on the sorption of pollutants to microplastics are abundant, the subsequent desorption in the gastrointestinal tract (GIT) is less understood. This prompted us to systematically investigate the release of microplastics-sorbed PAHs at realistic loadings (44-95 ng/mg) utilizing a physiology-based in vitro model comprising digestion in simulated saliva, gastric, and small and large intestinal fluids. Using benzo[a]pyrene as a representative PAH, desorption from different microplastics based on low density polyethylene (LDPE), thermoplastic polyurethanes (TPUs), and polyamides (PAs) was investigated consecutively in all four GIT fluid simulants. The cumulative relative desorption (CRD) of benzo[a]pyrene was negligible in saliva simulant but increased from gastric (4 ± 1% - 15 ± 4%) to large intestinal fluid simulant (21 ± 1% - 29 ± 6%), depending on the polymer type. CRDs were comparable for ten different microplastics in the small intestinal fluid simulant, except for a polydisperse PA-6 variant (1-10 μm), which showed an exceptionally high release (51 ± 8%). Nevertheless, the estimated contribution of microplastics-sorbed PAHs to total human PAH dietary intake was very low (≤0.1%). Our study provides a systematic data set on the desorption of PAHs from microplastics in GIT fluid simulants.

Coastal plastic pollution: A global perspective

Coastal ecosystems have ecological importance worldwide and require control and prevention measures to mitigate human pollution. The objective of this study was to perform a systematic review to provide a comprehensive overview of the global issue of coastal plastic pollution. 689 articles were eligible for qualitative synthesis and 31 were considered for quantitative analysis. There was an exponential increase in articles addressing coastal plastic pollution over the past 50 years. Studies were mainly carried out on beaches, and plastic bottles were the most found item, followed by cigarette butts. Polyethylene was the predominant plastic polymer, and white microplastic fragments stood out. China published most articles on the topic and Brazil had the highest number of sites sampled. Meta-analysis had significant effect sizes based on the reported data. These findings carry significant implications for environmental policies, waste management practices, and targeted awareness campaigns aimed at mitigating plastic pollution.

The relationship between plastic ingestion and trace element concentrations in Arctic seabirds

Seabirds ingest contaminants linked to their prey's tissues, but also adsorbed to ingested plastic debris. To explore relationships between ingested plastics and trace elements concentrations, we analyzed 25 essential non-essential trace elements in liver tissue in relation to plastic content in the gastrointestinal tract in adults of four species of Arctic seabirds with different propensity to ingest plastic. Linear Discriminant Analysis (LDA) provided a clear separation between species based on element concentrations, but not among individuals with and without plastics. Molybdenum, copper, vanadium, and zinc were strong drivers of the LDA, separating northern fulmars (Fulmarus glacialis) from other species (60.4 % of explained between-group variance). Selenium, vanadium, zinc, and mercury were drivers separating black-legged kittiwakes (Rissa tridactyla) from the other species (19.3 % of explained between-group variance). This study suggests that ingestion of plastic particles has little influence on the burden of essential and non-essential trace elements in Arctic seabird species.

Reductive stress and cytotoxicity in the swollen river mussel (Unio tumidus) exposed to microplastics and salinomycin

Multistress effects lead to unpredicted consequences in aquatic ecotoxicology and are extremely concerning. The goal of this study was to trace how specific effects of the antibiotic salinomycin (Sal) and microplastics (MP) on the bivalve molluscs are manifested in the combined environmentally relevant exposures. Unio tumidus specimens were treated with Sal (0.6 μg L-1), MP (1 mg L-1, 2 μm size), and both at 18 °C (Mix) and 25 °C (MixT) for 14 days. The redox stress and apoptotic enzyme responses and the balance of Zn/Cu in the digestive gland were analyzed. The shared signs of stress included a decrease in NAD+/NADH and Zn/Cu ratios and lysosomal integrity and an increase in Zn-metallothioneins and cholinesterase levels. MP caused a decrease in the glutathione (GSH) concentration and redox state, total antioxidant capacity, and Zn levels. MP and Mix induced coordinated apoptotic/autophagy activities, increasing caspase-3 and cathepsin D (CtD) total and extralysosomal levels. Sal activated caspase-3 only and increased by five times Cu level in the tissue. Due to the discriminant analysis, the cumulative effect was evident in the combined exposure at 18 °C. However, under heating, the levels of NAD+, NADH, GSH, GSH/GSSG and metallothionein-related thiols were decreased, and coordination of the cytosolic and lysosomal death stimuli was distorted, confirming that heating and pollution could exert unexpected synergistic effects on aquatic life.

Data driven AI (artificial intelligence) detection furnish economic pathways for microplastics

Microplastics pollution is killing human life, contaminating our oceans, and lasting for longer in the environment than it is used. Microplastics have contaminated the geochemistry and turned the water system into trash barrel. Its detection in water is easy in comparison to soil and air so the attention of researchers is focused on it for now. Being very small in size, microplastics can easily cross the water filtration system and end up in the ocean or lakes and become the prospective challenge to aquatic life. This review piece provides the hot research theme and current advances in the field of microplastics and their eradication through the virtual world of artificial intelligence (AI) because Microplastics have confrontation with clean water tactics.

Sustainable struggling: decoding microplastic released from bioplastics-a critical review

This comprehensive review delves into the complex issue of plastic pollution, focusing on the emergence of biodegradable plastics (BDPs) as a potential alternative to traditional plastics. While BDPs seem promising, recent findings reveal that a large number of BDPs do not fully degrade in certain natural conditions, and they often break down into microplastics (MPs) even faster than conventional plastics. Surprisingly, research suggests that biodegradable microplastics (BDMPs) could have more significant and long-lasting effects than petroleum-based MPs in certain environments. Thus, it is crucial to carefully assess the ecological consequences of BDPs before widely adopting them commercially. This review thoroughly examines the formation of MPs from prominent BDPs, their impacts on the environment, and adsorption capacities. Additionally, it explores how BDMPs affect different species, such as plants and animals within a particular ecosystem. Overall, these discussions highlight potential ecological threats posed by BDMPs and emphasize the need for further scientific investigation before considering BDPs as a perfect solution to plastic pollution.

Do weathered microplastics impact the planktonic community? A mesocosm approach in the Baltic Sea

Microplastics (MPs) are ubiquitous pollutants of increasing concern in aquatic systems. However, little is still known about the impacts of weathered MPs on plankton at the community level after long-term exposure. In this study, we investigated the effects of weathered MPs on the structure and dynamics of a Baltic Sea planktonic community during ca. 5 weeks of exposure using a mesocosm approach (2 m3) mimicking natural conditions. MPs were obtained from micronized commercial materials of polyvinyl chloride, polypropylene, polystyrene, and polyamide (nylon) previously weathered by thermal ageing and sunlight exposure. The planktonic community was exposed to 2 μg L-1 and 2 mg L-1 of MPs corresponding to measured particle concentrations (10-120 μm) of 680 MPs L-1 and 680 MPs mL-1, respectively. The abundance and composition of all size classes and groups of plankton and chlorophyll concentrations were periodically analyzed throughout the experiment. The population dynamics of the studied groups showed some variations between treatments, with negative and positive effects of MPs exhibited depending on the group and exposure time. The abundance of heterotrophic bacteria, pico- and nanophytoplankton, cryptophytes, and ciliates was lower in the treatment with the higher MP concentration than in the control at the last weeks of the exposure. The chlorophyll concentration and the abundances of heterotrophic nanoflagellates, Astromoeba, dinoflagellate, diatom, and metazooplankton were not negatively affected by the exposure to MPs and, in some cases, some groups showed even higher abundances in the MP treatments. Despite these tendencies, statistical analyses indicate that in most cases there were no statistically significant differences between treatments over the exposure period, even at very high exposure concentrations. Our results show that weathered MPs of the studied conventional plastic materials have minimal or negligible impact on planktonic communities after long-term exposure to environmentally relevant concentrations.

Adsorption of PFAS onto secondary microplastics: A mechanistic study

Microplastics (MPs) are abundant in aquatic systems. The ecological risks of MPs may arise from their physical features, chemical properties, and/or their ability to concentrate and transport other contaminants, such as per- and polyfluoroalkyl substances (PFAS). PFAS have been extracted from MPs found in natural waters. Still, there needs to be a mechanistic investigation of the effect of PFAS chemistry and water physicochemical properties on how PFAS partition onto secondary MPs. Here, we studied the influence of pH, natural organic matter (NOM), ionic strength, and temperature on the adsorption of PFAS on MPs generated from PET water bottles. The adsorption of PFAS to the MPs was thermodynamically spontaneous at 25 °C, based on Gibb's free energy (ΔG = -16 to -23 kJ/mol), primarily due to increased entropy after adsorption. Adsorption reached equilibrium within 7-9 h. Hence, PFAS will partition to the surface of secondary PET MPs within hours in fresh and saline waters. Natural organic matter decreased the capacity of secondary PET MPs for PFAS through electrosteric repulsion, while higher ionic strength favored PFAS adsorption by decreasing electrostatic repulsion. Increased pH increased electrostatic repulsion, which negated PFAS adsorption. The study provides fundamental information for developing models to predict interactions between secondary MPs and PFAS.