Reducing the discharge of micropollutants in the aquatic environment: the benefits of upgrading wastewater treatment plants

Pesticides in wastewater treatment plant effluents in the Yeongsan River Basin, Korea: Occurrence and environmental risk assessment

Pesticides are among the main drivers posing risks to aquatic environments, with effluents from wastewater treatment plants (WWTPs) serving as a major source. This study aimed to identify the primary pesticides for which there was a risk of release into aquatic environments through WWTP effluents, thereby enabling more effective contamination management in public water bodies. In this study, monitoring, risk assessment, and risk-based prioritization of 87 pesticides in effluents from three WWTPs in the Yeongsan River Basin, Korea, were conducted. A total of 59 pesticides were detected at concentrations from 0.852 ng/L to 82.044 μg/L and exhibited variable patterns across different WWTP locations. An environmental risk assessment based on the risk quotient (RQ) of individual pesticides identified 13 substances implicated in significant ecotoxicological risks, as they exceeded RQ values of 1 at least once. An optimized risk (RQf)-based prioritization, considering the frequency of the measured environmental concentration (MEC) exceeding the predicted environmental concentration (PNEC), was conducted to identify pesticides that potentially posed risks and thus should be managed as a priority. Four pesticides had an RQf value >1; metribuzin exhibited the highest RQf value of 4.951, followed by 3-phenoxybenzoic acid, atrazin-2-hydroxy, and atrazine. Additionally, five pesticides (terbuthylazine, methabenzthiazuron, diuron, thiacloprid, and fipronil) and another four pesticides (propazine, imidacloprid, hexaconazole, and hexazione) had RQf values >0.1 and > 0.01, respectively. By calculating the contributions of individual pesticides to the RQf of these mixtures (RQf, mix) based on the concentration addition model, it was determined that >95 % of the sum of RQf, mix was driven by the top seven pesticides. These findings highlight the importance of prioritizing pesticides for effective management of contamination sources.

Development of a probabilistic risk model for pharmaceuticals in the environment under population and wastewater treatment scenarios

Preparing for future environmental pressures requires projections of how relevant risks will change over time. Current regulatory models of environmental risk assessment (ERA) of pollutants such as pharmaceuticals could be improved by considering the influence of global change factors (e.g., population growth) and by presenting uncertainty more transparently. In this article, we present the development of a prototype object-oriented Bayesian network (BN) for the prediction of environmental risk for six high-priority pharmaceuticals across 36 scenarios: current and three future population scenarios, combined with infrastructure scenarios, in three Norwegian counties. We compare the risk, characterized by probability distributions of risk quotients (RQs), across scenarios and pharmaceuticals. Our results suggest that RQs would be greatest in rural counties, due to the lower development of current wastewater treatment facilities, but that these areas consequently have the most potential for risk mitigation. This pattern intensifies under higher population growth scenarios. With this prototype, we developed a hierarchical probabilistic model and demonstrated its potential in forecasting the environmental risk of chemical stressors under plausible demographic and management scenarios, contributing to the further development of BNs for ERA. Integr Environ Assess Manag 2024;20:1715-1735. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Room-temperature synthesis of bimetallic ZnCu-MOF-74 as an adsorbent for tetracycline removal from an aqueous solution

The novel bimetallic MOF, ZnCu-MOF-74, has been evaluated for the remediation of tetracycline-contaminated water. ZnCu-MOF-74 was obtained at room temperature, avoiding high pressure and temperature. ZnCu-MOF-74 exhibited chemical stability in the 4-8 pH range. The adsorption result analysis was described using the Elovich kinetic model and the Langmuir adsorption isotherm, suggesting a physicochemical process. The maximum adsorption capacity was estimated at 775.66 mg g-1. The pH of the solution and the presence of ions such as NO3-, SO42-, Na+, Mg2+, Cl-, and Ca2+ had no influence on the removal of tetracycline. In addition, π-interactions and metal complexation were proposed as possible adsorption mechanisms through FT-IR and XPS. ZnCu-MOF-74 showed outstanding cyclability performance, preserving its adsorption capacity after 4 adsorption-desorption cycles, besides exhibiting chemical stability, proving the benefits of applying ZnCu-MOF-74 in the water treatment process.

Occurrence, removal, and prioritization of organic micropollutants in four full-scale wastewater treatment plants in Korea

This study investigated the occurrence, removal rate, and potential risks of 43 organic micropollutants (OMPs) in four municipal wastewater treatment plants (WWTPs) in Korea. Results from two-year intensive monitoring confirmed the presence of various OMPs in the influents, including pharmaceuticals such as acetaminophen (pain relief), caffeine (stimulants), cimetidine (H2-blockers), ibuprofen (non-steroidal anti-inflammatory drugs- NSAIDs), metformin (antidiabetics), and naproxen (NSAIDs) with median concentrations of >1 μg/L. Some pharmaceuticals (carbamazepine-anticonvulsants, diclofenac-NSAIDs, propranolol-β-blockers), corrosion inhibitors (1H-benzotriazole-BTR, 4-methyl-1H-benzotriazole-4-TTR), and perfluorinated compounds (PFCs) were negligibly removed during WWTP treatment. The OMP concentrations in the influents and effluents were mostly lower in August than those of other months (p-value <0.05) possibly due to wastewater dilution by high precipitation or enhanced biodegradation under high-temperature conditions. The anaerobic-anoxic-oxic process (A2O) with a membrane bioreactor exhibited higher OMP removal than other processes, such as A2O with sedimentation or the conventional activated sludge process (p-value <0.05). Pesticides (DEET and atrazine), corrosion inhibitors (4-TTR and BTR), and metformin were selected as priority OMPs in toxicity-driven prioritization, whereas PFCs were determined as priority OMPs given their persistence and bioaccumulation properties. Overall, our results contribute to an important database on the occurrence, removal, and potential risks of OMPs in Korean WWTPs.

Limitations of wastewater treatment plants in removing trace anthropogenic biomarkers and future directions: A review

This review highlights the limitations faced by conventional wastewater treatment plants (WWTPs) in effectively removing contaminants of emerging concern (CECs), heavy metals (HMs), and Escherichia coli (E. coli). This emphasises the limitations of current treatment methods and advocates for innovative approaches to enhance the removal efficiency. By following the PRISMA guidelines, the study systematically reviewed relevant literature on detecting and remedying these pollutants in wastewater treatment facilities. Conventional wastewater treatment plants struggle to eliminate CECs, HMs, and E. coli owing to their small size, persistence, and complex nature. The review suggests upgrading WWTPs with advanced tertiary processes to significantly improve contaminant removal. This calls for cost-effective treatment parameters and standardised assessment techniques to enhance the fate of MPs in WWTPs and WRRFs. It recommends integrating insights from mass-balance model studies on MPs in WWTP to overcome modelling challenges and ensure model reliability. In conclusion, this review underscores the urgent need for advancements in wastewater treatment processes to mitigate the environmental impact of trace anthropogenic biomarkers. Future efforts should focus on conducting comprehensive studies, implementing advanced treatment methods, and optimising management practices in WWTPs and WRRFs.

Dissolved Organic Matter-Mediated Photosensitized Activation of Monochloramine for Micropollutant Abatement in Wastewater Effluent

Utilizing solar light and water matrix components in situ to reduce the chemical and energy demands would make treatment technologies more sustainable for micropollutant abatement in wastewater effluents. We herein propose a new strategy for micropollutant abatement through dissolved organic matter (DOM)-mediated photosensitized activation of monochloramine (NH2Cl). Exposing the chlorinated wastewater effluent with residual NH2Cl to solar irradiation (solar/DOM/NH2Cl process) degrades six structurally diverse micropollutants at rate constants 1.26-34.2 times of those by the solar photolysis of the dechlorinated effluent (solar/DOM process). Notably, among the six micropollutants, the degradation rate constants of estradiol, acetaminophen, bisphenol A, and atenolol by the solar/DOM/NH2Cl process are 1.13-4.32 times the summation of those by the solar/DOM and solar/NH2Cl processes. The synergism in micropollutant degradation is attributed to the generation of reactive nitrogen species (RNS) and hydroxyl radicals (HO·) from the photosensitized activation of NH2Cl. Triplet state-excited DOM (3DOM*) dominates the activation of NH2Cl, leading to the generation of RNS, while HO· is produced from the interactions between RNS and other photochemically produced reactive intermediates (e.g., O2·- and DOM·+/·-). The findings advance the knowledge of DOM-mediated photosensitization and offer a sustainable method for micropollutant abatement in wastewater effluents containing residual NH2Cl.

Machine learning modeling of fluorescence spectral data for prediction of trace organic contaminant removal during UV/H2O2 treatment of wastewater

Dynamic feedback of the removal performance of trace organic contaminants (TrOCs) is essential towards economical advanced oxidation processes (AOPs), whereas the corresponding quick-response feedback methods have long been desired. Herein, machine learning (ML) multi-target regression random forest (MORF) models were developed based on the fluorescence spectra to predict the removal of TrOCs during UV/H2O2 treatment of municipal secondary effluent as a typical AOP. The predictive performance of the developed MORF model (R2 = 0.83-0.95) exhibited higher accuracy over the traditional linear regression models with R2 increased by ∼0.15. Furthermore, through feature importance analysis, the spectral regions of high importance were identified for different groups of TrOCs, thus enabling faster data acquisition due to remarkably reduced size of required fluorescence spectral scanning region. Specifically, the fluorescence regions Ex(235-275 nm)/Em(325-400 nm) and Ex(240-360 nm)/Em(325-450 nm) were found highly correlated with the removal of the TrOCs susceptible to both photodegradation and •OH degradation and those primarily subject to •OH degradation, respectively. In addition, the spectral regions of high importance were also individually identified for the investigated TrOCs during the AOP. Through providing an efficient ML-based feedback method to monitor TrOC removal during AOP, this study sheds light on the development of dynamic feedback-based strategies for precise and economical advanced treatment of wastewater.

A multi-scenario risk assessment strategy applied to mixtures of chemicals of emerging concern in the River Aconcagua basin in Central Chile

Environmental risk assessments strategies that account for the complexity of exposures are needed in order to evaluate the toxic pressure of emerging chemicals, which also provide suggestions for risk mitigation and management, if necessary. Currently, most studies on the co-occurrence and environmental impacts of chemicals of emerging concern (CECs) are conducted in countries of the Global North, leaving massive knowledge gaps in countries of the Global South. In this study, we implement a multi-scenario risk assessment strategy to improve the assessment of both the exposure and hazard components in the chemical risk assessment process. Our strategy incorporates a systematic consideration and weighting of CECs that were not detected, as well as an evaluation of the uncertainties associated with Quantitative Structure-Activity Relationships (QSARs) predictions for chronic ecotoxicity. Furthermore, we present a novel approach to identifying mixture risk drivers. To expand our knowledge beyond well-studied aquatic ecosystems, we applied this multi-scenario strategy to the River Aconcagua basin of Central Chile. The analysis revealed that the concentrations of CECs exceeded acceptable risk thresholds for selected organism groups and the most vulnerable taxonomic groups. Streams flowing through agricultural areas and sites near the river mouth exhibited the highest risks. Notably, the eight risk drivers among the 153 co-occurring chemicals accounted for 66-92 % of the observed risks in the river basin. Six of them are pesticides and pharmaceuticals, chemical classes known for their high biological activity in specific target organisms.

Oxidation processes and me

This publication summarizes my journey in the field of chemical oxidation processes for water treatment over the last 30+ years. Initially, the efficiency of the application of chemical oxidants for micropollutant abatement was assessed by the abatement of the target compounds only. This is controlled by reaction kinetics and therefore, second-order rate constant for these reactions are the pre-requisite to assess the efficiency and feasibility of such processes. Due to the tremendous efforts in this area, we currently have a good experimental data base for second-order rate constants for many chemical oxidants, including radicals. Based on this, predictions can be made for compounds without experimental data with Quantitative Structure Activity Relationships with Hammet/Taft constants or energies of highest occupied molecular orbitals from quantum chemical computations. Chemical oxidation in water treatment has to be economically feasible and therefore, the extent of transformation of micropollutants is often limited and mineralization of target compounds cannot be achieved under realistic conditions. The formation of transformation products from the reactions of the target compounds with chemical oxidants is inherent to oxidation processes and the following questions have evolved over the years: Are the formed transformation products biologically less active than the target compounds? Is there a new toxicity associated with transformation products? Are transformation products more biodegradable than the corresponding target compounds? In addition to the positive effects on water quality related to abatement of micropollutants, chemical oxidants react mainly with water matrix components such as the dissolved organic matter (DOM), bromide and iodide. As a matter of fact, the fraction of oxidants consumed by the DOM is typically > 99%, which makes such processes inherently inefficient. The consequences are loss of oxidation capacity and the formation of organic and inorganic disinfection byproducts also involving bromide and iodide, which can be oxidized to reactive bromine and iodine with their ensuing reactions with DOM. Overall, it has turned out in the last three decades, that chemical oxidation processes are complex to understand and to manage. However, the tremendous research efforts have led to a good understanding of the underlying processes and allow a widespread and optimized application of such processes in water treatment practice such as drinking water, municipal and industrial wastewater and water reuse systems.

A Unique Monitoring Method for Fecal and Sewage-Derived Chemical Pollution Utilizing International Pellet Watch Approach

This study established a unique approach to assess fecal contamination by measuring fecal sterols, especially coprostanol (5β-cholestanol-3β-ol, 5β) and cholestanol (5α-cholestan-3β-ol, 5α) and their ratio 5β/(5β + 5α) alongside triclosan (TCS) and methyl-triclosan (MTC) in beached plastic pellets across 40 countries. Coprostanol concentrations ranged from 3.6 to 8190 ng/g pellet with extremely high levels in densely populated areas in African countries. The 5β/(5β + 5α) ratio was not affected by the difference in residence time of pellets in aquatic environments, and their spatial pattern showed a positive correlation with that of sedimentary sterols, demonstrating its reliability as an indicator of fecal contamination. Pellets from populated areas of economically developing countries, i.e., Africa and Asia, with lower coverage of wastewater treatment exhibited higher 5β/(5β + 5α) ratios (∼0.7) corresponding to ∼1% sewage in seawater, while pellets from developed countries, i.e., the USA, Canada, Japan, and Europe, with higher coverage of modern wastewater treatment displayed lower ratios (∼0.5), corresponding to the first contact limit. Triclosan levels were higher in developing countries (0.4-1298 ng/g pellet), whereas developed countries showed higher methyl-triclosan levels (0.5-70 ng/g pellet) due to TCS conversion during secondary treatment. However, some samples from Japan and Europe displayed higher TCS levels, suggesting contributions from combined sewage overflow (CSO). Combination of 5β/(5β + 5α) and MTC/TCS ratios revealed extreme fecal contamination from direct input of raw sewage due to inadequate treatment facilities in some African and South and Southeast Asian countries.

Comparison on removal performance of virus, antibiotic-resistant bacteria, cell-associated and cell-free antibiotic resistance genes, and indicator chemicals by ozone in the filtrated secondary effluent of a sewage treatment plant

Due to the widespread appearance of viruses, antibiotic-resistant bacteria (ARBs), and antibiotic resistance genes (ARGs) in the aquatic environment, more powerful oxidation processes such as ozonation are needed to enhance the efficiency of their inactivation and removal during wastewater treatment. However, information is lacking on the elimination rates of viruses, ARBs, cell-associated ARGs (ca-ARGs), and cell-free ARGs (cf-ARGs) during ozonation. This study examined the kinetics and dose-dependent inactivation of a virus (MS2 coliphage) and an ARB (Ampicillin-resistant [AmpR] E. coli) and the removal of ca- and cf-ARGs (plasmid-encoded blaTEM) by ozonation in a filtered secondary effluent (SE) of a municipal sewage treatment plant (STP). In addition, the ozonation kinetics of carbamazepine (CBZ) and metoprolol (MTP)-ubiquitous organic micropollutants with different removal rate constants-were also investigated in order to monitor their effectiveness as indicators for the abovementioned biological risk factors. Our results showed that ozonation was an efficient way to remove MS2, AmpRE. coli, ARGs, CBZ, and MTP. We investigated the kinetics of their inactivation/removal with respect to exposure in terms of CT (dissolved ozone concentration C and contact time T) value, and found their inactivation/removal constants were in the following order: MS2 (8.66 ×103 M-1s-1) ≈ AmpRE. coli (8.19 ×103 M-1s-1) > cf-ARG (3.95 ×103 M-1s-1) > CBZ (3.21 ×103 M-1s-1) > ca-ARG (2.48×103 M-1s-1) > MTP (8.35 ×102 M-1s-1). In terms of specific ozone dose, > 5-log inactivation of MS2 was observed at > 0.30 mg O3/mg DOC, while > 5-log inactivation of AmpRE. coli was confirmed at 1.61-2.35 mg O3/mg DOC. Moreover, there was almost no removal of ca-ARG when the specific ozone dose was < 0.68 mg O3/mg DOC. However, 2.86-3.42-log removal of ca-ARG was observed at 1.27-1.31 mg O3/mg DOC, while 1.14-1.36-log removal of cf-ARG was confirmed at 3.60-4.30 mg O3/mg DOC. As alternative indicators, > 4-log removal of CBZ was observed at > 1.00 mg O3/mg DOC, while > 2-log removal of MTP was confirmed at > 2.00 mg O3/mg DOC. Thus, it was observed that inactivation of E. coli needs a greater ozone dose to achieve the same level of inactivation of AmpRE. coli; for ARGs, cf-ARG can persist longer than ca-ARG if low dosages of ozone are applied in the filtrated SE, CBZ might act as an indicator with which to monitor the inactivation of viruses and ARBs, while MTP might act as an indicator with which to monitor removal of ARGs. Moreover, cf-ARG cannot be neglected even after ozonation due to the possibility that ca-ARGs can become cf-ARGs during ozonation and be discharged with the final effluent, posing a potential risk to the receiving environment.

Oxidative treatment of micropollutants present in wastewater: A special emphasis on transformation products, their toxicity, detection, and field-scale investigations

Micropollutants have become ubiquitous in aqueous environments due to the increased use of pharmaceuticals, personal care products, pesticides, and other compounds. In this review, the removal of micropollutants from aqueous matrices using various advanced oxidation processes (AOPs), such as photocatalysis, electrocatalysis, sulfate radical-based AOPs, ozonation, and Fenton-based processes has been comprehensively discussed. Most of the compounds were successfully degraded with an efficiency of more than 90%, resulting in the formation of transformation products (TPs). In this respect, degradation pathways with multiple mechanisms, including decarboxylation, hydroxylation, and halogenation, have been illustrated. Various techniques for the analysis of micropollutants and their TPs have been discussed. Additionally, the ecotoxicity posed by these TPs was determined using the toxicity estimation software tool (T.E.S.T.). Finally, the performance and cost-effectiveness of the AOPs at the pilot scale have been reviewed. The current review will help in understanding the treatment efficacy of different AOPs, degradation pathways, and ecotoxicity of TPs so formed.

Comprehensive two-dimensional liquid chromatography with high resolution mass spectrometry to investigate the photoelectrochemical degradation of environmentally relevant pharmaceuticals and their degradation products in water

The widespread presence of organic micropollutants in the environment reflects the inability of traditional wastewater treatment plants to remove them. In this context, advanced oxidation processes (AOPs) have emerged as promising quaternary wastewater treatment technologies since they efficiently degrade recalcitrant components by generating highly reactive free radicals. Nonetheless, the chemical characterization of potentially harmful byproducts is essential to avoid the contamination of natural water bodies with hazardous substances. Given the complexity of wastewater matrices, the implementation of comprehensive analytical methodologies is required. In this work, the simultaneous photoelectrochemical degradation of seven environmentally relevant pharmaceuticals and one metabolite from the EU Watch List 2020/1161 was examined in ultrapure water and simulated wastewater, achieving excellent removal efficiencies (overall >95%) after 180 min treatment. The reactor unit was linked to an online LC sample manager, allowing for automated sampling every 15 min and near real-time process monitoring. Online comprehensive two-dimensional liquid chromatography (LC × LC) coupled with high resolution mass spectrometry (HRMS) was subsequently used to tentatively identify degradation products after photoelectrochemical degradation. Two reversed-phase liquid chromatography (RPLC) columns were used: an SB-C18 column operated with 5 mM ammonium formate at pH 5.8 (1A) and methanol (1B) as the mobile phases in the first dimension and an SB-Aq column using acidified water at pH 3.1 (2A) and acetonitrile (2B) as the mobile phases in the second dimension. This resulted in a five-fold increase in peak capacity compared to one-dimensional LC while maintaining the same total analysis time of 50 min. The LC x LC method allowed the tentative identification of 12 venlafaxine, 7 trimethoprim and 10 ciprofloxacin intermediates. Subsequent toxicity predictions suggested that some of these byproducts were potentially harmful. This study presents an effective hybrid technology for the simultaneous removal of pharmaceuticals from contaminated wastewater matrices and demonstrates how multidimensional liquid chromatography techniques can be applied to better understand the degradation mechanisms after the treatment of micropollutants with AOPs.

Assessing impacts of municipal wastewater treatment plant upgrades on bacterial hazard contributions to the receiving urban river using SourceTracker

Upgrading municipal wastewater treatment plants (MWTPs) has been implemented in many megacities of China to reduce the discharges of nutrients and other pollutants and improve water quality of highly urbanized rivers. However, the contribution of MWTP discharge to bacterial hazards in the receiving rivers after upgrades has been largely unknown. In this study, high-throughput sequencing and shotgun metagenomics were applied to investigate the changes in the abundance, composition, potential risks, and contributions of bacteria and antibiotic resistance genes (ARGs) from effluent to receiving river after upgrading the third-largest MWTP in China with denitrification biofilters, ultrafiltration, ozonation, and disinfection processes. The annual loadings of total nitrogen and 27 types of pharmaceuticals were reduced by 42.4% ± 13.2% and 46.2% ± 15.4%, respectively. Bacterial biomass decreased from (3.58 ± 0.49) to (1.23 ± 0.27) × 107 16S rRNA gene copies/mL, and identified biomarkers in effluent and downstream shifted due to the adopted processes. Opportunistic pathogen bacteria downstream were also reduced. Although the relative abundance of total ARGs in MWTP effluent increased from 1.10 ± 0.02 to 2.19 ± 0.03 copies/16S rRNA gene after upgrades, that of total and high-risk ARGs downstream showed no significant difference. More importantly, the Bayesian-based SourceTracker method provided valuable insight by revealing that the contributions of MWTP discharge to downstream bacteria (from 44.2% ± 1.5%-31.4% ± 0.9%) and ARGs (from 61.2% ± 5.3%-47.6% ± 4.1%) were significantly reduced following the upgrades, indicating upgrading MWTP showed integrated benefits to the bacterial hazards in the receiving river. This study provides useful information for better control of bacterial hazard risks and operational strategy for the improvement of the urban aquatic ecosystem.

Nanoparticle-Assisted Liquid Crystal Droplet Sensors Enable Analysis of Low-Concentration Species in Aqueous Medium

We introduce nanoparticle-assisted liquid crystal (LC) droplet-based sensors that allow determination of low-level concentrations of aqueous soluble species. The silica nanoparticles functionalized with mixed monolayers composed of two distinct groups, hydrophobic alkane tail- and charged group-terminated silanes, facilitated ternary physical interactions between the model analytes (methylene blue (MB) or methyl orange (MO)) and the nematic mesogens 5CB (4-cyano-4'-pentylbiphenyl), and the interfacial species of the nanoparticle. The response of the LC droplets was measured upon nanoparticle adsorption as a function of analyte concentration, which was characterized by the optical determination of the configuration distributions of the LC droplets. We highlight the importance of the charging and the composition of the nanoparticle interfaces for analytical purposes that allow accurate determination of the concentration of the analytes on the order of 0.01 ppb. Such a low concentration corresponds to a low interfacial coverage of nanoparticles, indicating the promisingly high sensitivity of the sensor platform to target analytes. Distinct from the past examples of the LC-based sensors, the nanoparticle-assisted LC sensors allow detection of the species that do not directly cause an ordering transition at the LC-water interfaces, which allow a broader range of analytical targets. The sensor platform that we report herein can be easily tunable for a range of target molecules and will find use in the determination of a wide range of micropollutants in aqueous environments.

The Future of Municipal Wastewater Reuse Concentrate Management: Drivers, Challenges, and Opportunities

Water reuse is rapidly becoming an integral feature of resilient water systems, where municipal wastewater undergoes advanced treatment, typically involving a sequence of ultrafiltration (UF), reverse osmosis (RO), and an advanced oxidation process (AOP). When RO is used, a concentrated waste stream is produced that is elevated in not only total dissolved solids but also metals, nutrients, and micropollutants that have passed through conventional wastewater treatment. Management of this RO concentrate─dubbed municipal wastewater reuse concentrate (MWRC)─will be critical to address, especially as water reuse practices become more widespread. Building on existing brine management practices, this review explores MWRC management options by identifying infrastructural needs and opportunities for multi-beneficial disposal. To safeguard environmental systems from the potential hazards of MWRC, disposal, monitoring, and regulatory techniques are discussed to promote the safety and affordability of implementing MWRC management. Furthermore, opportunities for resource recovery and valorization are differentiated, while economic techniques to revamp cost-benefit analysis for MWRC management are examined. The goal of this critical review is to create a common foundation for researchers, practitioners, and regulators by providing an interdisciplinary set of tools and frameworks to address the impending challenges and emerging opportunities of MWRC management.

Insights into greenhouse gas emissions from a wastewater treatment plant in vulnerable water areas of China

Wastewater treatment plants (WWTPs) are a significant anthropogenic source of greenhouse gas (GHG), but the quantitative assessment of GHG emissions from WWTPs in vulnerable water areas under stricter discharge limits remains unclear. Herein, depending on a case WWTP in southern China, we investigated the impacts of discharge standard improvement and key drivers of GHG emissions using daily operating data. We demonstrated that the stricter discharge limits increased the total GHG emission intensity by 18.2 %, with direct emissions increasing more than indirect GHG emissions. The GHG emissions were negatively correlated with water quantity, showing the scale effect, which became more pronounced after the discharge standard improvement. Increasing influent chemical oxygen demand and total nitrogen concentrations significantly drove the variations in GHG emissions, which were accelerated under stricter discharge limits. This study provides insights into the evaluation of GHG emission from WWTPs in vulnerable water areas and carbon-neutral wastewater management policies.

Persistent Trace Organic Contaminants Are Transformed Rapidly under Sulfate- and Fe(III)-Reducing Conditions in a Nature-Based Subsurface Water Treatment System

Subsurface treatment systems, such as constructed wetlands, riverbank filtration systems, and managed aquifer recharge systems, offer a low-cost means of removing trace organic contaminants from treated municipal wastewater. To assess the processes through which trace organic contaminants are removed in subsurface treatment systems, pharmaceuticals and several major metabolites were measured in porewater, sediment, and plants within a horizontal levee (i.e., a subsurface flow wetland that receives treated municipal wastewater). Concentrations of trace organic contaminants in each wetland compartment rapidly declined along the flow path. Mass balance calculations, analysis of transformation products, microcosm experiments, and one-dimensional transport modeling demonstrated that more than 60% of the contaminant removal could be attributed to transformation. Monitoring of the system with and without nitrate in the wetland inflow indicated that relatively biodegradable trace organic contaminants, such as acyclovir and metoprolol, were rapidly transformed under both operating conditions. Trace organic contaminants that are normally persistent in biological treatment systems (e.g., sulfamethoxazole and carbamazepine) were removed only when Fe(III)- and sulfate-reducing conditions were observed. Minor structural modifications to trace organic contaminants (e.g., hydroxylation) altered the pathways and extents of trace organic contaminant transformation under different redox conditions. These findings indicate that subsurface treatment systems can be designed to remove both labile and persistent trace organic contaminants via transformation if they are designed and operated in a manner that results in sulfate-and Fe(III)-reducing conditions.

Evaluation of the prediction of micropollutant elimination during bromide ion-containing industrial wastewater ozonation using the ROH, O3 value

The composition of the wastewater matrix influences the oxidation potential of ozonation, a technique widely recognized efficient removal of micropollutants. Here, we developed a chemical kinetic model to determine the ozone dose required to minimize bromate production in wastewater containing bromine ions while achieving target removal rates. In wastewater ozonation, ozone decomposition comprises instantaneous ozone consumption and subsequent decomposition at first-order reaction rates. Under the injection condition of 1.5 g O3/g dissolved organic carbon (DOC), the instantaneous ozone demand was 62.7% of the injection concentration, and it increased proportionally with increasing injected ozone concentration. Ozone and hydroxyl radical exposures were proportional to the initial ozone dose, while hydroxyl radical exposure was proportional to ozone exposure, and the deviation was relatively high at 1.0-1.5 g O3/g DOC. The calculated hydroxyl radical exposure was 3.0 × 10-10 to 5.3 × 10-10 M s. Ozone and hydroxyl radicals are highly correlated with the ratio of ozone dose to organic matter concentration. Therefore, a trace substance removal rate evaluation model combined with the ROH, O3 model and a bromate generation model were also considered. For ibuprofen, the ozone dose for achieving the target removal rate of 80% while maintaining the bromate concentration below 50 μg L-1 was suitable in the operating range of 0.86 g O3/g DOC or more. The proposed method provides a practical operation strategy to calculate the appropriate ozone dose condition from the target compound removal rate prediction and bromate generation models considering the ratio of ozone dose to organic matter concentration in the incoming wastewater.

Integrated Treatment of Per- and Polyfluoroalkyl Substances in Existing Wastewater Treatment Plants-Scoping the Potential of Foam Partitioning

Foam fractionation is becoming increasingly popular as a treatment technology for water contaminated with per- and polyfluoroalkyl substances (PFAS). At many existing wastewater treatment facilities, particularly in aerated treatment steps, foam formation is frequently observed. This study aimed to investigate if foam fractionation for the removal of PFAS could be integrated with such existing treatment processes. Influent, effluent, water under the foam, and foam were sampled from ten different wastewater treatment facilities where foam formation was observed. These samples were analyzed for the concentration of 29 PFAS, also after the total oxidizable precursor (TOP) assay. Enrichment factors were defined as the PFAS concentration in the foam divided by the PFAS concentration in the influent. Although foam partitioning did not lead to decreased ∑PFAS concentrations from influent to effluent in any of the plants, certain long-chain PFAS were removed with efficiencies up to 76%. Moreover, ∑PFAS enrichment factors in the foam ranged up to 105, and enrichment factors of individual PFAS ranged even up to 106. Moving bed biofilm reactors (MBBRs) were more effective at enriching PFAS in the foam than activated sludge processes. Altogether, these high enrichment factors demonstrate that foam partitioning in existing wastewater treatment plants is a promising option for integrated removal. Promoting foam formation and removing foam from the water surface with skimming devices may improve the removal efficiencies further. These findings have important implications for PFAS removal and sampling strategies at wastewater treatment plants.

The impact of microplastics on bivalve mollusks: A bibliometric and scientific review

Bivalves are important members of the ecosystem and their populations are declining globally, making them a concern for their role in ecosystem services and the fishing industry. Bivalves are excellent bioindicators of MPs pollution due to their widespread distribution, filtering capabilities, and close association with human health. Microplastics (MPs) have direct and indirect impacts on bivalves, affecting their physiology, habitat structure, food sources, and persistence of organic pollutants. This review provides an extensive overview of the impact of MPs on bivalves, covering various aspects such as their economic significance, ecological roles, and importance in biomonitoring environmental quality. The article presents the current state of knowledge on the sources and pathways of MPs in aquatic environments and their effects on bivalves. The mechanisms underlying the effects of MPs on bivalves, including ingestion, filtration activity, feeding inhibition, accumulation, bioaccumulation, and reproduction, are also discussed. Additionally, a bibliometric analysis of research on MPs in bivalves is presented, highlighting the number of papers, geographical distribution, and keyword clusters relating to MPs. Finally, the review emphasizes the importance of ongoing research and the development of mitigation strategies to reduce the negative effects of MPs pollution on bivalves and their habitats in oceans and coastal waters.

Integrated data-driven cross-disciplinary framework to prevent chemical water pollution

Access to a clean and healthy environment is a human right and a prerequisite for maintaining a sustainable ecosystem. Experts across domains along the chemical life cycle have traditionally operated in isolation, leading to limited connectivity between upstream chemical innovation to downstream development of water-treatment technologies. This fragmented and historically reactive approach to managing emerging contaminants has resulted in significant externalized societal costs. Herein, we propose an integrated data-driven framework to foster proactive action across domains to effectively address chemical water pollution. By implementing this integrated framework, it will not only enhance the capabilities of experts in their respective fields but also create opportunities for novel approaches that yield co-benefits across multiple domains. To successfully operationalize the integrated framework, several concerted efforts are warranted, including adopting open and FAIR (findable, accessible, interoperable, and reusable) data practices, developing common knowledge bases/platforms, and staying vigilant against new substance "properties" of concern.

Critical review on data processing algorithms in non-target screening: challenges and opportunities to improve result comparability

Non-target screening (NTS) is a powerful environmental and analytical chemistry approach for detecting and identifying unknown compounds in complex samples. High-resolution mass spectrometry has enhanced NTS capabilities but created challenges in data analysis, including data preprocessing, peak detection, and feature extraction. This review provides an in-depth understanding of NTS data processing methods, focusing on centroiding, extracted ion chromatogram (XIC) building, chromatographic peak characterization, alignment, componentization, and prioritization of features. We discuss the strengths and weaknesses of various algorithms, the influence of user input parameters on the results, and the need for automated parameter optimization. We address uncertainty and data quality issues, emphasizing the importance of incorporating confidence intervals and raw data quality assessment in data processing workflows. Furthermore, we highlight the need for cross-study comparability and propose potential solutions, such as utilizing standardized statistics and open-access data exchange platforms. In conclusion, we offer future perspectives and recommendations for developers and users of NTS data processing algorithms and workflows. By addressing these challenges and capitalizing on the opportunities presented, the NTS community can advance the field, improve the reliability of results, and enhance data comparability across different studies.

Addressing chemical pollution in biodiversity research

Climate change, biodiversity loss, and chemical pollution are planetary-scale emergencies requiring urgent mitigation actions. As these "triple crises" are deeply interlinked, they need to be tackled in an integrative manner. However, while climate change and biodiversity are often studied together, chemical pollution as a global change factor contributing to worldwide biodiversity loss has received much less attention in biodiversity research so far. Here, we review evidence showing that the multifaceted effects of anthropogenic chemicals in the environment are posing a growing threat to biodiversity and ecosystems. Therefore, failure to account for pollution effects may significantly undermine the success of biodiversity protection efforts. We argue that progress in understanding and counteracting the negative impact of chemical pollution on biodiversity requires collective efforts of scientists from different disciplines, including but not limited to ecology, ecotoxicology, and environmental chemistry. Importantly, recent developments in these fields have now enabled comprehensive studies that could efficiently address the manifold interactions between chemicals and ecosystems. Based on their experience with intricate studies of biodiversity, ecologists are well equipped to embrace the additional challenge of chemical complexity through interdisciplinary collaborations. This offers a unique opportunity to jointly advance a seminal frontier in pollution ecology and facilitate the development of innovative solutions for environmental protection.

Recognition, possible source, and risk assessment of organic pollutants in surface water from the Yongding River Basin by non-target and target screening

Organic pollutants in aquatic environment could have important implications on pollution stress on aquatic organisms and even on the risk of human exposure. Thus, revealing their occurrence in aquatic environment is essential for water quality monitoring and ecological risk purposes. In this study, a comprehensive two-dimensional gas chromatography connected with time-of-flight mass spectrometry (GC × GC-TOF-MS) was applied, to enable non-target and target analysis of pollutants in the Yongding River Basin. Based on the isotopic patterns, accurate masses and standard substances, certain environmental contaminants were tentatively identified which including polycyclic aromatic hydrocarbon (PAHs), organochlorine pesticides (OCPs), phenols, amines, etc. The compounds with the highest concentration were naphthalene (109.0 ng/L), 2,3-benzofuran (51.5 ng/L) and 1,4-dichlorobenzene (35.9 ng/L) in Guishui River. Wastewater treatment plants (WWTPs) discharges were a main source of pollutants in Yongding River Basin, as the types of compounds screened in the downstream river were relatively similar to those from WWTPs. According to the target analysis, a number of pollutants were selected due to the acute toxicity and cumulative discharge from WWTPs and downstream rivers. Three PAHs (naphthalene, Benzo(b)fluoranthene and pyrene) homologues showed moderate risk to fish and H. Azteca in Yongding River Basin, while the rest of the measured chemicals showed low ecological impact across the entire study area based on the risk assessment. The results are helpful for understanding the necessity of high-throughput screening analysis for assessing water quality of rivers and the discharge emissions of pollutants from WWTPs to the river environment.

Efficiency of ozonation and O3/H2O2 as enhanced wastewater treatment processes for micropollutant abatement and disinfection with minimized byproduct formation

Ozonation, a viable option for improving wastewater effluent quality, requires process optimization to ensure the organic micropollutants (OMPs) elimination and disinfection under minimized byproduct formation. This study assessed and compared the efficiencies of ozonation (O₃) and ozone with hydrogen peroxide (O₃/H₂O₂) for 70 OMPs elimination, inactivation of three bacteria and three viruses, and formation of bromate and biodegradable organics during the bench-scale O₃ and O₃/H₂O₂ treatment of municipal wastewater effluent. 39 OMPs were fully eliminated, and 22 OMPs were considerably eliminated (54 ± 14%) at an ozone dosage of 0.5 gO₃/gDOC for their high reactivity to ozone or ^•OH. The chemical kinetics approach accurately predicted the OMP elimination levels based on the rate constants and exposures of ozone and ^•OH, where the quantum chemical calculation and group contribution method successfully predicted the ozone and ^•OH rate constants, respectively. Microbial inactivation levels increased with increasing ozone dosage up to ∼3.1 (bacteria) and ∼2.6 (virus) log₁₀ reductions at 0.7 gO₃/gDOC. O₃/H₂O₂ minimized bromate formation but significantly decreased bacteria/virus inactivation, whereas its impact on OMP elimination was insignificant. Ozonation produced biodegradable organics that were removed by a post-biodegradation treatment, achieving up to 24% DOM mineralization. These results can be useful for optimizing O₃ and O₃/H₂O₂ processes for enhanced wastewater treatment.

Nontarget Analysis of Polluted Surface Waters in Bangladesh Using Open Science Workflows

Nontarget mass spectrometry has great potential to reveal patterns of water contamination globally through community science, but few studies are conducted in low-income countries, nor with open-source workflows, and few datasets are FAIR (Findable, Accessible, Interoperable, Reusable). Water was collected from urban and rural rivers around Dhaka, Bangladesh, and analyzed by liquid chromatography high-resolution mass spectrometry in four ionization modes (electrospray ionization ±, atmospheric pressure chemical ionization ±) with data-independent MS2 acquisition. The acquisition strategy was complementary: 19,427 and 7365 features were unique to ESI and APCI, respectively. The complexity of water pollution was revealed by >26,000 unique molecular features resolved by MS-DIAL, among which >20,000 correlated with urban sources in Dhaka. A major wastewater treatment plant was not a dominant pollution source, consistent with major contributions from uncontrolled urban drainage, a result that encourages development of further wastewater infrastructures. Matching of deconvoluted MS2 spectra to public libraries resulted in 62 confident annotations (i.e., Level 1-2a) and allowed semiquantification of 42 analytes including pharmaceuticals, pesticides, and personal care products. In silico structure prediction for the top 100 unknown molecular features associated with an urban source allowed 15 additional chemicals of anthropogenic origin to be annotated (i.e., Level 3). The authentic MS2 spectra were uploaded to MassBank Europe, mass spectral data were openly shared on the MassIVE repository, a tool (i.e., MASST) that could be used for community science environmental surveillance was demonstrated, and current limitations were discussed.

Anthropogenic impacts on the nitrate pollution in an urban river: Insights from a combination of natural-abundance and paired isotopes

Urban rivers are often characterized by high nitrate (NO₃^-) loadings. High NO₃^- loadings cause water quality and ecological damages, which undermines the sustainable development of cities. To date, the drivers of these high NO₃^- loadings remain unclear. This study, for the first time, integrated natural-abundance isotopes (δ¹⁵ N/δ¹⁸O-NO₃^- and δD/δ¹⁸O-H₂O) and ¹⁵N-pairing techniques to comprehensively reveal the anthropogenic impacts on the NO₃^- pollution in an urban river. Natural-abundance isotopes suggested that in both the wet and dry seasons, the NO₃^- was predominantly from the conservative mixing of different sources, and biological NO₃^- removal was minor. The ¹⁵N-pairing experiments supported the natural-abundance isotope data, quantitatively showing that in-soil nitrification was prevailing, while NO₃^- removal processes (denitrification, anammox, and dissimilatory NO₃^- reduction to ammonium) were weak. A Bayesian isotope-mixing model showed that soil sources (soil organic nitrogen and chemical fertilizer) dominated the NO₃^- in the upper reaches, while in the lower reaches, the impermeable riparian zone short-circuited the access of soils to the river. Here, the wastewater treatment plants became a significant source of NO₃^-. This study quantitatively revealed the drivers of high NO₃^- loadings in an urban river, and generated important clues for effective NO₃^- pollution control and remediation in urban rivers.

Identifying the water quality variation characteristics and their main driving factors from 2008 to 2020 in the Yellow River Basin, China

Understanding of the water quality dynamics and their main influence factors is crucial for sustainable water environment management especially in the sensitive ecosystem area. Here, the spatiotemporal dynamic of water quality in the Yellow River Basin from 2008 to 2020 and its relationship with physical geography, human activities, and meteorology were studied by using Pearson correlation test, and a generalized linear model. The results showed that water quality was significantly improved since 2008, which was reflected from the decreasing trend of the permanganate index (COD_Mn) and ammonia nitrogen (NH₃-N), and increasing trend of the dissolved oxygen (DO). However, the total nitrogen (TN) remained severely polluted with average annual concentration inferior to level V. Spatially speaking, the water quality in the upper and lower reaches was better than that of the middle reaches. The whole basin was severely contaminated by TN with 2.62 ± 1.52, 3.91 ± 1.71, and 2.91 ± 1.20 mg L^-1 from upper, middle, and lower reaches, respectively. Thus, TN should be paid much attention in the water quality management of the Yellow River Basin. The water quality improvement could be attributed to the reduction of pollution discharges and ecological restoration. Further analysis found the variation of water consumption and increase of forest and wetland area contributed 39.90% and 47.49% for COD_Mn and 58.92% and 30.87% for NH₃-N, respectively. Meteorological variables and total water resources contributed slightly. This study is expected to provide in-depth insights for the water quality dynamics and their response to human activities and natural factors in the Yellow River Basin, which could provide theoretical references for water quality protection and management.

Isotopically labeled ozone: A new approach to elucidate the formation of ozonation products

As ozonation becomes a widespread treatment for removal of chemicals of emerging concern from wastewater treatment plant effluents, there are increasing concerns regarding the formation of ozonation products (OPs), and their possible impacts on the aquatic environment and eventually human health. In this study, a novel method was developed that utilizes heavy oxygen (¹⁸O₂) for the production of heavy ozone ([¹⁸O₁]O₂, [¹⁸O₂]O₁, [¹⁸O₃]) to actively label OPs from oxygen transfer reactions. To establish and validate this new approach, venlafaxine with a well-described oxygen transfer reaction (tertiary amine -> N-oxide) was chosen as a model compound. Observed ¹⁸O/¹⁶O ratios in the major OP venlafaxine N-oxide (NOV) correlated with expected ¹⁸O purities based on tracer experiments. These results confirmed the successful labeling with heavy oxygen and furthermore demonstrate the potential to monitor NOV as an indicator of ¹⁸O/¹⁶O ratios during ozonation. As a next step, ¹⁸O/¹⁶O ratios were used to elucidate the formation mechanism of previously described OPs from sulfamethoxazole (SMX). Seven OPs were detected including the frequently described nitro-SMX, which was formed with a maximum yield of 3.2% (of initial SMX). With the successful labeling of six of the seven OPs from sulfamethoxazole, it was possible to confirm their previously proposed formation pathways, and to distinguish oxygen transfer from electron transfer reactions. ¹⁸O/¹⁶O ratios in OPs indicate that hydroxylation of the aromatic ring and formation of nitro-groups mostly follows oxygen transfer reactions, while electron transfer reactions initiate the formation of hydroxylamine and the abstraction of NH₂ leading to catechol.

Effects of anthropogenic stress on hosts and their microbiomes: Treated wastewater alters performance and gut microbiome of a key detritivore (Asellus aquaticus)

Human activity is a major driver of ecological and evolutionary change in wild populations and can have diverse effects on eukaryotic organisms as well as on environmental and host-associated microbial communities. Although host-microbiome interactions can be a major determinant of host fitness, few studies consider the joint responses of hosts and their microbiomes to anthropogenic changes. In freshwater ecosystems, wastewater is a widespread anthropogenic stressor that represents a multifarious environmental perturbation. Here, we experimentally tested the impact of treated wastewater on a keystone host (the freshwater isopod Asellus aquaticus) and its gut microbiome. We used a semi-natural flume experiment, in combination with 16S rRNA amplicon sequencing, to assess how different concentrations (0%, 30%, and 80%) of nonfiltered wastewater (i.e. with chemical toxicants, nutrients, organic particles, and microbes) versus ultrafiltered wastewater (i.e. only dissolved pollutants and nutrients) affected host survival, growth, and food consumption as well as mid- and hindgut bacterial community composition and diversity. Our results show that while host survival was not affected by the treatments, host growth increased and host feeding rate decreased with nonfiltered wastewater - potentially indicating that A. aquaticus fed on organic matter and microbes available in nonfiltered wastewater. Furthermore, even though the midgut microbiome (diversity and composition) was not affected by any of our treatments, nonfiltered wastewater influenced bacterial composition (but not diversity) in the hindgut. Ultrafiltered wastewater, on the other hand, affected both community composition and bacterial diversity in the hindgut, an effect that in our system differed between sexes. While the functional consequences of microbiome changes and their sex specificity are yet to be tested, our results indicate that different components of multifactorial stressors (i.e. different constituents of wastewater) can affect hosts and their microbiome in distinct (even opposing) manners and have a substantial impact on eco-evolutionary responses to anthropogenic stressors.

Degradation of diclofenac and 4-chlorobenzoic acid in aqueous solution by cold atmospheric plasma source

In this study, cold atmospheric plasma (CAP) was explored as a novel advanced oxidation process (AOP) for water decontamination. Samples with high concentration aqueous solutions of Diclofenac sodium (DCF) and 4-Chlorobenzoic acid (pCBA) were treated by plasma systems. Atmospheric pressure plasma jets (APPJs) with a 1 pin-electrode and multi-needle electrodes (3 pins) configurations were used. The plasma generated using argon as working gas was touching a stationary liquid surface in the case of pin electrode-APPJ while for multi-needle electrodes-APPJ the liquid sample was flowing during treatment. In both configurations, a commercial RF power supply was used for plasma ignition. Measurement of electrical signals enabled precise determination of power delivered from the plasma to the sample. The optical emission spectroscopy (OES) of plasma confirmed the appearance of excited reactive species in the plasma, such as hydroxyl radicals and atomic oxygen which are considered to be key reactive species in AOPs for the degradation of organic pollutants. Treatments were conducted with two different volumes (5 mL and 250 mL) of contaminated water samples. The data acquired allowed calculation of degradation efficiency and energy yield for both plasma sources. When treated with pin-APPJ, almost complete degradation of 5 mL DCF occurred in 1 min with the initial concentration of 25 mg/L and 50 mg/L, whereas 5 mL pCBA almost degraded in 10 min at the initial concentration of 25 mg/L and 40 mg/L. The treatment results with multi-needle electrodes system confirmed that DCF almost completely degraded in 30 min and pCBA degraded about 24 % in 50 min. The maximum calculated energy yield for 50 % removal was 6465 mg/kWh after treatment of 250 mL of DCF aqueous solution utilizing the plasma recirculation technique. The measurements also provided an insight to the kinetics of DCF and pCBA degradation. Degradation products and pathways for DCF were determined using LC-MS measurements.

New insight into fate and transport of organic compounds from pollution sources to aquatic environment using non-targeted screening: A wastewater treatment plant case study

A variety of chemicals discharged into the aquatic environment by the wastewater treatment plant (WWTP), which is a potential source of hazard to the ecological environment and human health. This study established a novel analytical method for all compounds using non-targeted screening to comprehensively explore the fate and transport of organic compounds from WWTP to aquatic environment. 3967 and 3636 features were detected in WWTP samples and river samples, respectively. Multi-level classification was applied to all identified compounds, and results showed that aliphatics were dominant in both abundance and response, accounting for an average of 35.49 % and 74.10 %, respectively. A total of 88 Emerging Contaminants (ECs), including 22 endocrine disrupting chemicals (EDCs), 12 pharmaceuticals and personal care products (PPCPs), 12 pesticides, 10 volatile organic compounds (VOCs), 5 persistent organic pollutants (POPs) and 27 chemicals with other uses, were identified from all compounds, and their traceability analysis was performed. Furthermore, the contribution rate of organic compounds from WWTP effluent to river was calculated to be 33.60 % by the analysis of source-sink relationship. An in-depth and comprehensive exploration of the fate and transport of all organic compounds will help to provide guidelines for the treatment technologies and achieve the traceability of pollutants.

Formation of carbonyl compounds during ozonation of lake water and wastewater: Development of a non-target screening method and quantification of target compounds

Ozonation of natural waters is typically associated with the formation of carbonyl compounds (aldehydes, ketones and ketoacids), a main class of organic disinfection byproducts (DBPs). However, the detection of carbonyl compounds in water and wastewater is challenged by multiple difficulties inherent to their physicochemical properties. A non-target screening method involving the derivatisation of carbonyl compounds with p-toluenesulfonylhydrazine (TSH) followed by their analysis using liquid chromatography coupled to electrospray ionisation high-resolution mass spectrometry (LC-ESI-HRMS) and an advanced non-target screening and data processing workflow was developed. The workflow was applied to investigate the formation of carbonyl compounds during ozonation of different water types including lake water, aqueous solutions containing Suwannee River Fulvic acid (SRFA), and wastewater. A higher sensitivity for most target carbonyl compounds was achieved compared to previous derivatisation methods. Moreover, the method allowed the identification of known and unknown carbonyl compounds. 8 out of 17 target carbonyl compounds were consistently detected above limits of quantification (LOQs) in most ozonated samples. Generally, the concentrations of the 8 detected target compounds decreased in the order: formaldehyde > acetaldehyde > glyoxylic acid > pyruvic acid > glutaraldehyde > 2,3-butanedione > glyoxal > 1-acetyl-1-cyclohexene. The DOC concentration-normalised formation of carbonyl compounds during ozonation was higher in wastewater and SRFA-containing water than in lake water. The specific ozone doses and the type of the dissolved organic matter (DOM) played a predominant role for the extent of formation of carbonyl compounds. Five formation trends were distinguished for different carbonyl compounds. Some compounds were produced continuously upon ozonation even at high ozone doses, while others reached a maximum concentration at a certain ozone dose above which they decreased. Concentrations of target and peak areas of non-target carbonyl compounds during full-scale ozonation at a wastewater treatment plant showed an increase as a function of the specific ozone dose (sum of 8 target compounds ∼ 280 µg/L at 1 mgO₃/mgC), followed by a significant decrease after biological sand filtration (> 64-94% abatement for the different compounds). This highlights the biodegradability of target and non-target carbonyl compounds and the importance of biological post-treatment.

Stable isotope labeling for detection of ozonation byproducts in effluent organic matter with FT-ICR-MS

Despite effluent organic matter (EfOM) being a major consumer of ozone during wastewater treatment, little is known about ozonation byproducts (OBPs) produced from EfOM. To unambiguously identify OBPs, heavy ozone was used to ozonate EfOM, resulting in ¹⁸O labeled and unlabeled OBPs. Labeled OBPs mostly represent a single ¹⁸O transfer and were classified as either direct or indirect OBPs based on the ¹⁸O/¹⁶O intensity ratios of the isotopologues. Of the 929 labeled OBPs, 84 were unequivocally classified as direct OBPs. The remainder suggest a major contribution by indirect, hydroxyl radical induced formation of OBPs in EfOM. Overall, labelled OBPs possess a low degree of unsaturation and contributed most to OBP peak intensity - marking them as potential end products. A few direct and indirect OBPs with high peak intensity containing ¹⁸O and heteroatoms (N, S) were fragmented with CID FT-ICR-MS/MS and screened for indicative neutral losses carrying heavy oxygen. The neutral loss screening was used to detect the ¹⁸O location on the OBP and indicate the original functional group in EfOM based on known reaction mechanisms. We identified sulfoxide and sulfonic acid functional groups in selected OBPs - implying the presence of reduced sulfur in EfOM molecules - while no evidence for nitrogen containing functional groups reacting with ozone was found.

A step forward on site-specific environmental risk assessment and insight into the main influencing factors of CECs removal from wastewater

The presence of Contaminants of Emerging Concern (CECs) in water systems has been recognized as a potential source of risk for human health and the ecosystem. The present paper aims at evaluating the effects of different characteristics of full-scale Wastewater Treatment Plants (WWTPs) on the removal of 14 selected CECs belonging to the classes of caffeine, illicit drugs and pharmaceuticals. Particularly, the investigated plants differed because of the treatment lay-out, the type of biological process, the value of the operating parameters, the fate of the treated effluent (i.e. release into surface water or reuse), and the treatment capacity. The activity consisted of measuring concentrations of the selected CECs and also traditional water quality parameters (i.e. COD, phosphorous, nitrogen species and TSS) in the influent and effluent of 8 plants. The study highlights that biodegradable CECs (cocaine, methamphetamine, amphetamine, benzoylecgonine, 11-nor-9carboxy-Δ9-THC, lincomycin, trimethoprim, sulfamethoxazole, sulfadiazine, sulfadimethoxine, carbamazepine, ketoprofen, warfarin and caffeine) were well removed by all the WWTPs, with the best performance achieved by the MBR for antibiotics. Carbamazepine was removed at the lowest extent by all the WWTPs. The environmental risk assessed by using the site-specific value of the dilution factor resulted to be high in 3 out of 8 WWTPs for carbamazepine and less frequently for caffeine. However, the risk was reduced when the dilution factor was assumed equal to the default value of 10 as proposed by EU guidelines. Therefore, a specific determination of this factor is needed taking into account the hydraulic characteristics of the receiving water body.

Impacts of wastewater effluents and seasonal trends on levels of antipsychotic pharmaceuticals in water and sediments from two cold-region rivers

Most pharmaceuticals are found at trace concentrations in aquatic systems, but their continuous release and potential accumulation can lead to adverse health effects in exposed organisms. Concentrations can vary temporally, driven by variations in discharges of receiving waters, sorption to sediments, and other biotic and abiotic exchange processes. The principal aim of this research was to better understand the occurrence, trends, and dynamics of pharmaceuticals in a cold-climate, riverine environment. To this end, a suite of seven representative antipsychotic pharmaceuticals was measured upstream and downstream of two wastewater treatment plants (WWTPs) in Saskatchewan, Canada, located in the South Saskatchewan River and Wascana Creek, respectively, across three seasons. Concentrations of analytes were in the ng/L range and generally greater downstream of both WWTPs compared to upstream. Some compounds, including the tricyclic antidepressant amitriptyline, which was the most abundant analyte in water and sediment from both sites and across seasons, reached low μg/L concentrations. Data collected from this research effort indicate contamination with antipsychotic pharmaceuticals, with the potential to adversely impact exposed organisms.

Effects of conventionally treated and ozonated wastewater on the damselfly larva oxylipidome in response to on-site exposure

Pharmaceutical residues discharged through insufficiently treated or untreated wastewater enter aquatic environments, where they may adversely impact organisms such as aquatic invertebrates. Ozonation, an advanced wastewater treatment technique, has been successfully implemented to enhance the removal of a broad range of pharmaceuticals, however diverse byproducts and transformation products that are formed during the ozonation process make it difficult to predict how ozonated wastewater may affect aquatic biota. The aim of this study was to investigate effects on fatty acid metabolites, oxylipins, in a common invertebrate species, damselfly larvae, after on-site exposure to conventional wastewater treatment plant (WWTP) effluent and additionally ozonated effluent at a full-scale WWTP. Subsequent ozonation of the conventionally treated wastewater was assessed in terms of i) removal of pharmaceuticals and ii) potential sub-lethal effects on the oxylipidome. Northern damselfly (Coenagrion hastulatum) larvae were exposed for six days in the treatment plant facility to either conventional WWTP effluent or ozonated effluent and the effects on pharmaceutical levels and oxylipin levels were compared with those from tap water control exposure. Ozonation removed pharmaceuticals at an average removal efficiency of 67% (ozone dose of 0.49 g O₃/g DOC). Of 38 pharmaceuticals detected in the effluent, 16 were removed to levels below the limit of quantification by ozonation. Levels of two oxylipins, 12(13)-EpODE and 15(16)-EpODE, were reduced in larvae exposed to the conventionally treated wastewater in comparison to the tap water control. 15(16)-EpODE was reduced in the larvae exposed to ozonated effluent in comparison to the tap water control. One oxylipin, 8-HETE, was significantly lower in larvae exposed to conventional WWTP effluent compared to ozonated effluent. In conclusion, the study provides proof-of-principle that damselfly larvae can be used on-site to test the impact of differentially treated wastewater.

Prioritization of micropollutants in municipal wastewater and the joint inhibitory effects of priority organic pollutants on Vibrio qinghaiensis sp.-Q67

Treatment of wastewater in municipal wastewater treatment plants has become a major barrier to organic pollutants entering the aquatic environment. In this study, qualitative screening of organic micropollutants was conducted in a typical municipal wastewater treatment plant (MWWTP) using gas chromatography-mass spectrometry (GC-MS). The identified compounds were prioritized according to their comprehensive scores ranked by detection frequency, semi-quantitative concentration, bioaccumulation, ecotoxicity, and biodegradability. The results showed dibutyl phthalate, antioxidant 2246, methyl stearate, 2,4,6-tri‑tert-butylphenol, and dioctyl phthalate had the top five scores and were ranked as priority organic pollutants in the municipal wastewater. The individual and joint toxicity determinations of the five compounds were carried out by a bioluminescence inhibition assay using Vibrio qinghaiensis sp.-Q67 (V. qinghaiensis). The individual toxicity assay results of these pollutants on V. qinghaiensis demonstrated that the order of the acute toxicity of the five priority organic pollutants was as follows: dioctyl phthalate> dibutyl phthalate> methyl stearate> antioxidant 2246> 2,4,6-tri‑tert-butylphenol. The joint toxicity showed partial addition or antagonism among these pollutants. The prediction results of the mixed toxicity were compared between the concentration addition model and the independent action model, indicating that a single traditional prediction model could not accurately predict the mixed toxicity of different types of organic pollutants, and that a comprehensive application of model prediction could improve the accuracy of mixed toxicity prediction. This method could provide a theoretical basis for systematic screening and toxicity prediction of pollutants in wastewater.

Removal of micropollutants through bio-based materials as a transition to circular bioeconomy: Treatment processes involved, perspectives and bottlenecks

The recent increase in micropollutant levels in water bodies is a growing concern globally. The generation of new materials and techniques for wastewater treatment often involves the release of hazardous wastes and the utilization of energy related to it. This can be resolved by the synthesis of bio-based materials through the use of already released wastes and naturally occurring components, adding their value as reusable resources. These bio-based materials find wide applications for micropollutant elimination and energy tapping due to the presence of various functional groups, large surface area, high stability, and reusability. The processes involved in micropollutant elimination through biomaterials generally include adsorption and degradation. These treatment processes are suggested to depend on various operational parameters like pH, temperature, dose, reaction time, presence of other contaminants, ions, etc. in the system, which may influence the process efficiency. Understanding the potential of bio-based materials many steps can be taken towards its large-scale application to upgrade wastewater treatment plants for micropollutant elimination. Furthermore, the recent advances of bio-based materials in energy storage and conversion have widened its scope for implementation in a circular bioeconomy. The bottlenecks towards such a transition and future recommendations are also presented and discussed.

Elimination efficiency of synthetic musks during the treatment of drinking water with ozonation and UV-based advanced oxidation processes

This study investigated the reaction kinetics and elimination efficiency of eleven synthetic musks during ozonation and UV_254nm-based, advanced oxidation processes. The synthetic musks containing olefin moieties with electron-donating alkyl substituents such as octahydro tetramethyl naphthalenyl ethanone (OTNE) and ambrettolide (AMBT) showed high reactivity toward ozone (k ≥ 3.7 × 10⁵ M^-1 s^-1) and free available chlorine (FAC) (k = 9.2 - 88 M^-1 s^-1), while all other synthetic musks were less ozone reactive (k = 0.3 - 560 M^-1 s^-1) and FAC-refractory. All synthetic musks showed high ^•OH reactivity (k > 5 × 10⁹ M^-1 s^-1), except musk ketone (MK) (k = 2.3 × 10⁹ M^-1 s^-1). In concordance with the kinetic information, OTNE and AMBT were efficiently eliminated (>97%) in simulated ozone treatments of drinking water at a specific ozone dose of 0.5 gO₃/gDOC. The elimination levels of the other synthetic musks were below 50% at 0.5 gO₃/gDOC. The fluence-based UV photolysis rate constant of the synthetic musks was determined to be (0.2 - 2.7) × 10^-3 cm²/mJ. The elimination levels of synthetic musks during UV alone treatment ranged from 7 to 81% at a UV fluence of 500 mJ/cm². The addition of 10 mg/L H₂O₂ (UV/H₂O₂) significantly enhanced the elimination of most synthetic musks (achieving >90% elimination at 500 mJ/cm²), indicating that the ^•OH reaction was mainly responsible for their elimination. The addition of 10 mg/L FAC (UV/FAC) also significantly enhanced the elimination of olefinic and aromatic synthetic musks (>90%), for which the reaction with ClO^• was mainly responsible. For MK and two alkyl synthetic musks, their elimination during UV/FAC treatment was still limited (28 - 64%) and was mainly achieved by UV photolysis or reaction with ^•OH. In summary, this study substantiates the chemical kinetics approach as a helpful tool for predicting or interpreting the elimination of micropollutants during oxidative water treatment.

Unraveling the dynamics of organic micropollutants in wastewater: Online LC-MS/MS analysis at high temporal resolution

Online monitoring of organic micropollutants (OMPs) in the aquatic environment at high temporal resolution is an upcoming technique that provides insights into their dynamics and has the potential to bring water research and management to a new level. An online monitoring setup was developed to quantify OMPs in wastewater treatment plant (WWTP) influent and effluent using automated and continuous sampling, sample preparation, online solid-phase extraction-liquid chromatography-tandem mass spectrometry analysis and data evaluation. This online monitoring setup provided high selectivity and sensitivity (limit of quantification down to 1 ng/L) as well as a stable performance during one week of constant operation whilst using a high sampling frequency of 10 min (>1000 samples). Custom automated data evaluation enabled quantification within seconds after each measurement and results were comparable to those from a commercial software. Additionally, an alarm tool was included in the evaluation application, which automatically notified the user in case a substance exceeded a predefined threshold. The online monitoring setup was applied to WWTP influent and effluent, where 57 substances were monitored over a period of one week and two days, respectively. High temporal resolution enabled the observation of periodic patterns of pharmaceuticals as well as pollution by OMPs originating from point and diffuse sources, while dynamics of OMPs in WWTP effluent were less pronounced. These new insights into the dynamics of OMPs in WWTP influent, which would not be observable using 24 h composite samples, will be a starting point for new stormwater and wastewater research and management strategies.

Microbial bromate reduction following ozonation of bromide-rich wastewater in coastal areas

Ozonation of wastewater can reduce the release of organic micropollutants, but may result in the formation of undesirable by-products, such as bromate from bromide. Bromide is one of the most abundant ions in seawater, the primary precursor of bromate during ozonation, and the end product in microbial bromate reduction. Investigations were carried out to compare the concentration of bromide in wastewater in coastal and non-coastal catchment areas, to monitor bromate formation during ozonation, and to assess the potential for subsequent bromate reduction with denitrifying carriers. Higher bromide concentrations were systematically observed in wastewater from coastal catchment areas (0.2-2 mg Br^-/L) than in wastewater from non-coastal areas (0.06-0.2 mg Br^-/L), resulting in elevated formation of bromate during ozonation. Subsequent investigations of bromate reduction in contact with denitrifying carriers from two full-scale moving bed biofilm reactors (MBBRs) showed that 80 % of the bromate formed during ozonation could be reduced to bromide in 60 min with first-order rate constants of 0.3-0.8 L/(g_biomass·h). Flow-through experiments with denitrifying carriers also showed that combined reduction of bromate and nitrate could be achieved below a concentration of 2 mg NO_x^--N/L. These findings indicate that bromide-rich wastewater is more likely to be of concern when using ozonation in coastal than in non-coastal areas, and that bromate and nitrate reduction can be combined in a single biofilm reactor.

Assessment of phytotoxic potential and pathogenic bacteria removal from secondary effluents during ozonation and UV/H2O2

Wastewater reuse is an important strategy for water resource management. For this reason, the disinfection process must be appropriated, eliminating pathogenic microorganisms. Ozonation (O₃) and UV/H₂O₂ treatments can be used for effluent disinfection, but few studies just address the Escherichia coli quantification. In this study, secondary effluents from two wastewater treatment plants with different characteristics were exposed to O₃ (5 and 10 mg L^-1) or UV/H₂O₂ (H₂O₂: 90 mg L^-1) treatments and evaluated by BD Phoenix ™ 100 (Becton Dickinson, USA) and MALDI-TOF for the characterization of the indigenous microorganisms in the effluents, before and after treatments. Additionally, all the samples were tested for phytotoxicity by Lactuca sativa bioassay. The results showed that the highest ozone dose and the UV/H₂O₂ treatment were effective in removing E. coli. UV/H₂O₂ was more efficient as it eliminated most of the microorganisms. Acinetobacter sp., Aeromonas and Pseudomonas were still found after O₃ treatment. Bacillus sp. was found after O₃ and UV/H₂O₂ treatments. The results with L. sativa showed inhibition of root growth for all dry period (low rainfall) samples of one of the WWTP, due to the high concentration of the phytotoxicity compounds. For environmental and human health safety, treated effluents should be evaluated for their toxic and pathogenic potential before being released into the environment. Pathogens evaluation on treated effluents should cover a wider range of pathogenic microorganisms than those routinely required by legislation.

Chemical characterization of riverine sediments affected by wastewater treatment plant effluent discharge

This study was aimed at assessing the contribution of wastewater treatment effluents to the contamination profile of the sediments of receiving waterways. Three wastewater treatment plants (WWTP) were addressed, encompassing different population equivalent sizes, urbanization degrees and treatment methods translating differences in expected contamination patterns. Within each WWTP system, the assessment targeted the effluent and sediment samples collected upstream and downstream the effluent discharge point; contaminants belonging to several concerning chemical classes (metals and metalloids; pesticides; pharmaceuticals and personal care products, PPCPs; and polycyclic aromatic hydrocarbons, PAHs) were quantified both in effluent and sediment samples. Clear associations between contaminants present in the effluent and corresponding sediment samples were not always verified. In fact, a noticeable difference between the number or abundance of contaminants detected in effluents and in sediments, suggesting that effluents are not always the most likely source (e.g. PAHs). However, sediment contaminants that were likely sourced by the effluents were also identified (e.g. PPCPs). Sediment analysis offers an important historical view of contamination, especially in flowing recipient ecosystems where any characterization over the water matrix is ephemeral and linking exclusively to the moment of sampling. Hence, sediments should be considered for the establishment of WWTP operational benchmarks regulating the emission of contaminants, which is currently focused mostly on effluent composition thus potentially over/underestimating the longer-term impact of effluent discharge in the recipient waterways.