Synthesis of mesoscale ordered two-dimensional π-conjugated polymers with semiconducting properties

Real-space investigations of on-surface intermolecular radical transfer reactions assisted by persistent radicals

Synthesizing radicals that have both long lifetimes and high chemical reactivity remains a long-term challenge. Here, persistent phenyl radicals are successfully synthesized on Ag(111) by protecting the carbon radical site by designing the precursor molecule with suitable steric hindrance. As carbon-carbon coupling is prohibited, such radicals remain intact for longer than 6 hours at room temperature on Ag(111). Taking advantage of the long lifetimes, the as-synthesized radicals are directly characterized in the real space at the single-chemical-bond scale by means of bond-resolving scanning tunneling microscopy imaging. Accompanied by the excellent stability, the radicals exhibit high chemical reactivities and facilitate the intermolecular radical transfer reactions at extreme low temperature. The preparation of persistent radicals not only favors the characterization of a surface-stabilized radical in the real space but also aids in illuminating the detailed reaction pathways of subsequent radical-assisted reactions directly.

Phenalenyl Chemistry Revisited: Stable and Bioactive Multisubstituted Phenalenyl Radicals Synthesized via a Protection-Oxidation-Protection Strategy

Phenalenyl chemistry has flourished for decades but currently faces bottlenecks related to synthetic challenges and stability issues. In this study, we introduced an iterative protection-oxidation-protection (POP) strategy to synthesize stabilized phenalenyl radicals (PRs) with multiple substitutions at the α-positions. The applicability of this POP strategy was verified using triisopropylsilylthyl and phenyl substituents to generate trisubstituted PR1 and hexasubstituted PR2. In particular, both oxidation and dimerization were observed during the synthesis involving phenyl substituents. Both PR1 and PR2 were bench-stable, with half-lives in solution of up to 46 d and thermal decomposition temperatures of up to 300 °C. X-ray crystallographic analysis revealed that PR1 existed as a distinct 12-center-2-electron π-dimer, whereas PR2 existed as a monomer. The properties associated with monomer-dimer equilibrium both in the solid state and in solution were systematically investigated via variable-temperature spectroscopy, and the results revealed a small singlet-triplet energy gap and concentration-dependent absorption and electrochemical behaviors. Remarkably, both PR1 and PR2 formed biocompatible nanoparticles, with the latter capable of depleting reactive oxygen species in liver cells. This study thus demonstrated the applicability of the POP strategy for the construction of stable, functionalized PR derivatives with practical applications as spin functional materials.

First- and Second-Order Topological States in Two-Dimensional Noncovalent Molecular Chiral Crystals

Topological band physics has been extensively investigated in inorganic solid-state materials with a bonding structure. While covalent organic frameworks or metal-organic frameworks have garnered significant research interest, the high-order topological states in two-dimensional noncovalent molecular crystals remain largely uncharted. Here we investigated noncovalent molecular chiral crystals assembled from achiral molecules using first-principles calculations and tight-binding model analysis. The rotated achiral molecules introduce chiral enantiomers, promoting topological chiral states in the vicinity of conduction band edges. The structural chirality in the rotated monolayer crystal is described by the rotating Kekulé model, which possesses an opposite Berry curvature. Therefore, we further obtain the topological kink states of parallel propagating channels at the neighboring boundary of the two chiral enantiomers. In addition, this model breaks the chiral symmetry, thereby accounting for the origin of the higher-order topological corner states in the valence band. We simultaneously identify valley topological gapless edge states and second-order topological corner states, representing a significant step toward the development of first- and second-order topological insulators in noncovalent molecular chiral crystals. This work sheds light on intriguing higher-order topological states in noncovalent molecular crystals.

Isomerization of Organometallic Polymers on Ag(111): Revealing the Intermolecular Hydrogen Transfer Mechanism

Dehalogenation plays a crucial role in on-surface synthesis, but the bond-forming sites in dehalogenation occasionally differ from the original halogen-substituted sites, leading to unexpected products. Revealing its mechanism is essential for the atomically precise fabrication of low-dimensional nanomaterials, although it remains elusive. Herein, we report an isomerization of organometallic polymers derived from debromination on Ag(111) and elucidate the mechanism involving intermolecular hydrogen transfer via combining scanning tunneling microscopy, noncontact atomic force microscopy, and density functional theory calculations. At room temperature, the precursor 1,4-bis(3-bromothiophen-2-yl)benzene undergoes surface-assisted debromination on Ag(111), forming two organometallic polymers where the bond-forming sites correspond to the original debromination sites. Upon annealing to 393 K, the isomerization of organometallic polymers generates a linear organometallic polymer, where the bond-forming sites mismatched with the original debromination sites. Control experiments combined with theoretical calculations demonstrate that the unexpected isomerization proceeds through the dissociation of polymer chains into surface-stabilized diradical monomers or oligomers, intermolecular hydrogen transfer, and the final recombination of surface-stabilized radicals with Ag adatoms.

On-surface synthesis of organometallic nanorings linked by unconventional intermediates of the Ullmann reaction

Ullmann coupling has been one of the most important organic reactions for the formation of an aryl-aryl bond, which is of great significance in medicinal chemistry, natural product synthesis, and optoelectronic material fabrication. However, the associated reaction mechanism has not been determined with certainty and has mostly relied on theoretical calculations, since the identification of reaction intermediates lacked experimental evidence. Herein, we report the visualization of an unprecedented C-Cu-Br-Cu-C bonded intermediate state of Ullmann coupling by means of on-surface synthesis. These intermediates tend to form nanorings on a Cu(111) surface, as thermodynamically stable structures. Advanced techniques, including scanning tunneling microscopy, non-contact atomic force microscopy, and synchrotron radiation photoemission spectroscopy, together with density functional theory calculations, were used to scrutinize the structural assignments and intermediate transition process at the sub-molecular level. The C-Cu-Br-Cu-C structure is confirmed to be the precursor state of the conventional C-Cu-C intermediate during an on-surface Ullmann reaction, since their coexistence and transformation were observed experimentally. Our findings offer insights into revisiting and understanding the reaction mechanism of Ullmann coupling.

Mechanistic Insights into Regioselectivity and Its Evolution in On-Surface Polymerization

Surface-catalyzed polymerization is crucial in both chemical science and industrial manufacturing, yet achieving regioselective radical polymerization on the surface remains challenging. Here, we demonstrate the regioselective Ullmann polymerization of nonsymmetrical 2,8-dibromoquinoline (DBQ) on an Au(111) surface. By combining scanning tunneling microscopy, density functional theory calculations, and kinetic modeling, we reveal the regioselectivity and its evolution with surface temperature at the molecular level. At 348-368 K, DBQ monomers primarily form covalent dimers through energetically favored head-to-head (HtH) coupling. As the temperature increases to 390-473 K, oligomers and long polymer chains are formed, with less favored head-to-tail (HtT) linkages emerging and eventually dominating over HtH linkages. Such regioselectivity evolution from HtH to HtT is suggested to be related to a sequential monomer addition mode and a shift in the distribution of reactive sites at the end and tail of the polymer chains during polymerization. This result provides molecular-level mechanistic insights into the regiochemistry of surface-catalyzed polymerization.

Advances in synthetic strategies for two-dimensional conjugated polymers

Two-dimensional conjugated polymers (2D CPs) are typically represented by 2D conjugated covalent organic frameworks (COFs) that consist of covalently cross-linked linear conjugated polymers, which possess extended in-plane π-conjugation and out-of-plane electronic couplings. The precise incorporation of molecular building blocks into ordered polymer frameworks through (semi)reversible 2D polycondensation methodologies enables the synthesis of novel polymer semiconductors with designable and predictable properties for various (opto)electronic, spintronic, photocatalytic, and electrochemical applications. Linkage chemistry lays the foundation for this class of synthetic materials and provides a library for subsequent investigations. In this review, we summarize recent advances in synthetic strategies for 2D CPs. By exploring synthetic approaches and the intricate interplay between chemical structure, the efficiency of 2D conjugation, and related physicochemical properties, we are expected to guide readers with a general background in synthetic chemistry and those actively involved in electronic device research. Furthermore, the discussion will appeal to researchers intrigued by the prospect of uncovering novel physical phenomena or mechanisms inherent in these emerging polymer semiconductors. Finally, future research directions and perspectives of highly crystalline and processable 2D CPs for electronics and other cutting-edge fields are discussed.

Unraveling the Band Structure and Orbital Character of a π-Conjugated 2D Graphdiyne-Based Organometallic Network

Graphdiyne-based carbon systems generate intriguing layered sp-sp2 organometallic lattices, characterized by flexible acetylenic groups connecting planar carbon units through metal centers. At their thinnest limit, they can result in 2D organometallic networks exhibiting unique quantum properties and even confining the surface states of the substrate, which is of great importance for fundamental studies. In this work, the on-surface synthesis of a highly crystalline 2D organometallic network grown on Ag(111) is presented. The electronic structure of this mixed honeycomb-kagome arrangement - investigated by angle-resolved photoemission spectroscopy and scanning tunneling spectroscopy - reveals a strong electronic conjugation within the network, leading to the formation of two intense electronic band-manifolds. In comparison to theoretical density functional theory calculations, it is observed that these bands exhibit a well-defined orbital character that can be associated with distinct regions of the sp-sp2 monomers. Moreover, it is found that the halogen by-products resulting from the network formation locally affect the pore-confined states, causing a significant energy shift. This work contributes to the understanding of the growth and electronic structure of graphdiyne-like 2D networks, providing insights into the development of novel carbon materials beyond graphene with tailored properties.

Mechanistical Study on Substrate-Controlled Highly Selective [2+2] and [2+3] Cycloaddition Reactions

Polycyclic conjugated hydrocarbons have acquired increased interests recently because of their potential applications in electronic devices. On metal surfaces, the selective synthesis of four- and five-membered carbon rings remains challenging due to the presence of diverse reaction pathways. Here, utilizing the same precursor molecule, we successfully achieved substrate-controlled highly selective cycloaddition reactions towards four- and five-membered carbon rings. A 97 % yield for four-membered carbon rings on Au(111), while a 96 % yield towards five-membered carbon rings is achieved on Ag(111). The detailed topological structures of the reaction products are carefully examined by bond-resolving scanning tunneling microscopy (BR-STM) imaging with a CO functionalized tip. The underlying mechanism of the novel surface-directed reaction selectivity is elucidated by extensive density functional theory (DFT) calculations. Our study paves the way for high selective synthesis of polycyclic conjugated hydrocarbons with non-benzenoid rings.

On-Surface Synthesis and Characterization of Radical Spins in Kagome Graphene

Flat bands in Kagome graphene might host strong electron correlations and frustrated magnetism upon electronic doping. However, the porous nature of Kagome graphene opens a semiconducting gap due to quantum confinement, preventing its fine-tuning by electrostatic gates. Here we induce zero-energy states into a semiconducting Kagome graphene by inserting π-radicals at selected locations. We utilize the on-surface reaction of tribromotrioxoazatriangulene molecules to synthesize carbonyl-functionalized Kagome graphene on Au(111), thereafter modified in situ by exposure to atomic hydrogen. Atomic force microscopy and tunneling spectroscopy unveil the stepwise chemical transformation of the carbonyl groups into radicals, which creates local magnetic defects of spin state S = 1/2 and zero-energy states as confirmed by density functional theory. The ability to imprint local magnetic moments opens up prospects to study the interplay between topology, magnetism, and electron correlation in Kagome graphene.

Two-dimensional polyaniline crystal with metallic out-of-plane conductivity

Linear conducting polymers show ballistic transport, imposed by mobile carriers moving along the polymer chains1,2, whereas conductance in the extended dimension, that is, between polymer strands or layers, remains weak due to the lack of intermolecular ordering and electronic coupling3-5. Here we report a multilayer-stacked two-dimensional polyaniline (2DPANI) crystal, which shows metallic out-of-plane charge transport with high electrical conductivity. The material comprises columnar π arrays with an interlayer distance of 3.59 Å and periodic rhombohedral lattices formed by interwoven polyaniline chains. Electron spin resonance spectroscopy reveals significant electron delocalization in the 2DPANI lattices. First-principles calculations indicate the in-plane 2D conjugation and strong interlayer electronic coupling in 2DPANI facilitated by the Cl-bridged layer stacking. To assess the local optical conductivity, we used terahertz and infrared nanospectroscopy to unravel a Drude-type conductivity with an infrared plasma frequency and an extrapolated local d.c. conductivity of around 200 S cm-1. Conductive scanning probe microscopy showed an unusually high out-of-plane conductivity of roughly 15 S cm-1. Transport measurements through vertical and lateral micro-devices revealed comparable high out-of-plane (roughly 7 S cm-1) and in-plane conductivity (roughly 16 S cm-1). The vertical micro-devices further showed increasing conductivity with decreasing temperature, demonstrating unique out-of-plane metallic transport behaviour. By using this multilayer-stacked 2D conducting polymer design, we predict the achievement of strong electronic coupling beyond in-plane interactions, potentially reaching three-dimensional metallic conductivity6,7.

A Kagome Lattice of Lanthanide Atoms in a 2D Er-Directed Metal-Organic Coordination Network

Kagome lattices have attracted much attention due the very interesting properties they can exhibit, both from the electronic and the magnetic points of view, although much of the experimental studies have been reported on 3D metals or 2D nanosheets. In the past few years, on-surface synthesis has allowed the fabrication of strictly monolayer 2D metal-organic networks, many of them containing transition metals. In this paper we report the fabrication and the study of the electronic and magnetic properties of a monolayer 2D metal-organic network where the nodes are lanthanide atoms forming a kagome lattice.

Two-Dimensional Organic-Inorganic van der Waals Hybrids

Two-dimensional organic-inorganic (2DOI) van der Waals hybrids (vdWhs) have emerged as a groundbreaking subclass of layer-stacked (opto-)electronic materials. The development of 2DOI-vdWhs via systematically integrating inorganic 2D layers with organic 2D crystals at the molecular/atomic scale extends the capabilities of traditional 2D inorganic vdWhs, thanks to their high synthetic flexibility and structural tunability. Constructing an organic-inorganic hybrid interface with atomic precision will unlock new opportunities for generating unique interfacial (opto-)electronic transport properties by combining the strengths of organic and inorganic layers, thus allowing us to satisfy the growing demand for multifunctional applications. Here, this review provides a comprehensive overview of the latest advancements in the chemical synthesis, structural characterization, and numerous applications of 2DOI-vdWhs. Firstly, we introduce the chemistry and the physical properties of the recently rising organic 2D crystals (O2DCs), which feature crystalline 2D nanostructures comprising carbon-rich repeated units linked by covalent/noncovalent bonds and exhibit strong in-plane extended π-conjugation and weak interlayer vdWs interaction. Simultaneously, representative inorganic 2D crystals (I2DCs) are briefly summarized. After that, the synthetic strategies will be systematically summarized, including synthesizing single-component O2DCs with dimensional control and their vdWhs with I2DCs. With these synthetic approaches, the control in the dimension, the stacking modes, and the composition of the 2DOI-vdWhs will be highlighted. Subsequently, a special focus will be given on the discussion of the optical and electronic properties of the single-component 2D materials and their vdWhs, which will be closely relevant to their structures, so that we can establish a general structure-property relationship of 2DOI-vdWhs. In addition to these physical properties, the (opto-)electronic devices such as transistors, photodetectors, sensors, spintronics, and neuromorphic devices as well as energy devices will be discussed. Finally, we provide an outlook to discuss the key challenges for the 2DOI-vdWhs and their future development. This review aims to provide a foundational understanding and inspire further innovation in the development of next-generation 2DOI-vdWhs with transformative technological potential.

Physics and Chemistry of Two-Dimensional Triangulene-Based Lattices

ConspectusTriangulene (TRI) and its heterotriangulene (HT) derivatives are planar, triangle-shaped molecules that, via suitable coupling reactions, can form extended organic two-dimensional (2D) crystal (O2DC) structures. While TRI is a diradical, HTs are either closed-shell molecules or monoradicals which can be stabilized in their cationic form.Triangulene-based O2DCs have a characteristic honeycomb-kagome lattice. This structure gives rise to four characteristic electronic bands: two of them form Dirac points, while the other two are flat and sandwich the Dirac bands. Functionalization and heteroatoms are suitable means to engineer this band structure. Heteroatoms like boron and nitrogen shift the Fermi level upward and downward, respectively, while bridging groups and functionalized triangulene edges can introduce a dispersion to the flat bands.The stable backbone architecture makes 2D HT-polymers ideal for photoelectrochemical applications: (i) bridge functionalization can tune the band gap and maximize absorption, (ii) the choice of the center atom (B or N) controls the band occupation and shifts the Fermi level with respect to vacuum, allowing in some cases for overpotential-free photon-driven surface reactions, and (iii) the large surface area allows for a high flux of educts and products.The spin polarization in TRI and in open-shell HTs is maintained when linking them to dimers or extended frameworks with direct coupling or more elaborate bridging groups (acetylene, diacetylene, and phenyl). The dimers have a high spin-polarization energy and some of them are strongly magnetically coupled, resulting in stable high-spin or broken-symmetry (BS) low-spin systems. As O2DCs, some systems become antiferromagnetic Mott insulators with large band gaps, while others show Stoner ferromagnetism, maintaining the characteristic honeycomb-kagome bands but shifting the opposite spin-polarized bands to different energies. For O2DCs based on aza- and boratriangulene (monoradicals as building blocks), the Fermi level is shifted to a spin-polarized Dirac point, and the systems have a Curie temperature of about 250 K. For half-filled (all-carbon) systems, the Ovchinnikov rule or, equivalently, Lieb's theorem, is sufficient to predict the magnetic ordering of the systems, while the non-half-filled systems (i.e., those with heteroatoms) obey the more involved Goodenough-Kanamori rule to interpret the magnetism on the grounds of fundamental electronic interactions.There remain challenges in experiment and in theory to advance the field of triangulene-based O2DCs: Coupling reactions beyond surface chemistry have to be developed to allow for highly ordered, extended crystals. Multilayer structures, which are unexplored to date, will be inevitable in alternative synthesis approaches. The predictive power of density-functional theory (DFT) within state-of-the-art functionals is limited for the description of magnetic couplings in these systems due to the apparent multireference character and the large spatial extension of the spin centers.

Multistep Growth Pathway of Covalent Organic Framework Onion Nanostructures

The growth of complex organic macromolecular materials in solution is a pervasive phenomenon in both natural and synthetic systems, yet the underlying growth mechanisms remain largely unresolved. Using liquid-phase transmission electron microscopy (TEM), we elucidate the real-time growth pathways of covalent organic framework (COF) onion nanostructures, which involve graphitic layer formation, subsequent layer attachment, onion ring closure, and structural relaxation. This process is marked by variations in orientation and curvature, driven by the dynamic formation of the COF structure, which further regulates order-disorder transition and defect generation within the framework. Our in situ TEM characterizations provide valuable insights into how molecular arrangement drives the formation of complex nanostructures. We anticipate that direct imaging of COF nanostructure growth in liquids will open new opportunities for controlling COF crystal morphology, composition, and hierarchical structure development.

Azatriangulene-Based Conductive C═C Linked Covalent Organic Frameworks with Near-Infrared Emission

Two near-infrared (NIR) emissive π-conjugated covalent organic frameworks (COFs) pTANG1 and pTANG2 are synthesized using Knoevenagel condensation of trioxaazatriangulenetricarbaldehyde (TATANG) with benzene- and biphenyldiacetonitriles, respectively. The morphology of the COFs is affected by the size of TATANG precursor crystals. Donor-acceptor interactions in these COFs result in small bandgaps (≈1.6 eV) and NIR emission (λmax = 789 nm for pTANG1). pTANG1 can absorb up to 9 molecules of water per unit cell, which is accompanied by a marked quenching of the NIR emission, suggesting applications as humidity sensors. p-Doping with magic blue significantly increases the electrical conductivities of the COFs by up to 8 orders of magnitude, with the room temperature conductivity of pTANG1 reaching 0.65 S cm-1, the highest among reported C═C linked COFs. 1H NMR relaxometry, temperature-dependent fluorescence spectroscopy, and DFT calculations reveal that the higher rigidity of the shorter phenylene linker is responsible for the more extended conjugation (red-shifted emission, higher electrical conductivity) of pTANG1 compared to pTANG2.

Photons, Excitons, and Electrons in Covalent Organic Frameworks

Covalent organic frameworks (COFs) are created by the condensation of molecular building blocks and nodes to form two-dimensional (2D) or three-dimensional (3D) crystalline frameworks. The diversity of molecular building blocks with different properties and functionalities and the large number of possible framework topologies open a vast space of possible well-defined porous architectures. Besides more classical applications of porous materials such as molecular absorption, separation, and catalytic conversions, interest in the optoelectronic properties of COFs has recently increased considerably. The electronic properties of both the molecular building blocks and their linkage chemistry can be controlled to tune photon absorption and emission, to create excitons and charge carriers, and to use these charge carriers in different applications such as photocatalysis, luminescence, chemical sensing, and photovoltaics. In this Perspective, we will discuss the relationship between the structural features of COFs and their optoelectronic properties, starting with the building blocks and their chemical connectivity, layer stacking in 2D COFs, control over defects and morphology including thin film synthesis, exploring the theoretical modeling of structural, electronic, and dynamic features of COFs, and discussing recent intriguing applications with a focus on photocatalysis and photoelectrochemistry. We conclude with some remarks about present challenges and future prospects of this powerful architectural paradigm.

Vertically Expanded Crystalline Porous Covalent Organic Frameworks

Covalent organic frameworks (COFs) can be developed for molecular confinement and separation. However, their proximate π stacks limit the interlayer distance to be only 3-6 Å, which is too small for guests to enter. As a result, COFs block access to the x-y space and limit guest entry/exit strictly to only the pores along the z direction. Therefore, the extended faces of each layer are hidden between layers, precluding any interactions with guest molecules. Here, we report a strategy for opening interlayer spaces of COFs to attain newly accessible nanospaces between layers. This becomes possible using coordination bonds to replace the conventional π-π stacks between layers. We demonstrate this concept by synthesizing two-dimensional covalent cobalt(II) porphyrin layers through topology-guided polymerization, which were piled up by bidentate axial pillars through coordination bonds with cobalt(II) porphyrin along the z direction, assembling vertically expanded COFs via a one-pot reaction. The resultant frameworks separate the layers with axial pillars and create discrete apertures between layers defined by the molecular length of the pillars. Consequently, the originally inaccessible interlayers are open for guest access, while the polygonal π planes are exposed to trigger various supramolecular interactions. Vapor sorption, breakthrough experiments, and computational studies mutually revealed that the vertically expanded frameworks with optimal interlayer slits induce additional interactions to discriminate benzene and cyclohexane and separate their mixtures efficiently under ambient conditions.

Synthesis and structure of a non-van-der-Waals two-dimensional coordination polymer with superconductivity

Two-dimensional conjugated coordination polymers exhibit remarkable charge transport properties, with copper-based benzenehexathiol (Cu-BHT) being a rare superconductor. However, the atomic structure of Cu-BHT has remained unresolved, hindering a deeper understanding of the superconductivity in such materials. Here, we show the synthesis of single crystals of Cu3BHT with high crystallinity, revealing a quasi-two-dimensional kagome structure with non-van der Waals interlayer Cu-S covalent bonds. These crystals exhibit intrinsic metallic behavior, with conductivity reaching 103 S/cm at 300 K and 104 S/cm at 2 K. Notably, superconductivity in Cu3BHT crystals is observed at 0.25 K, attributed to enhanced electron-electron interactions and electron-phonon coupling in the non-van der Waals structure. The discovery of this clear correlation between atomic-level crystal structure and electrical properties provides a crucial foundation for advancing superconductor coordination polymers, with potential to revolutionize future quantum devices.

Prediction of metal-free Stoner and Mott-Hubbard magnetism in triangulene-based two-dimensional polymers

Ferromagnetism and antiferromagnetism require robust long-range magnetic ordering, which typically involves strongly interacting spins localized at transition metal atoms. However, in metal-free systems, the spin orbitals are largely delocalized, and weak coupling between the spins in the lattice hampers long-range ordering. Metal-free magnetism is of fundamental interest to physical sciences, unlocking unprecedented dimensions for strongly correlated materials and biocompatible magnets. Here, we present a strategy to achieve strong coupling between spin centers of planar radical monomers in π-conjugated two-dimensional (2D) polymers and rationally control the orderings. If the π-states in these triangulene-based 2D polymers are half-occupied, then we predict that they are antiferromagnetic Mott-Hubbard insulators. Incorporating a boron or nitrogen heteroatom per monomer results in Stoner ferromagnetism and half-metallicity, with the Fermi level located at spin-polarized Dirac points. An unprecedented antiferromagnetic half-semiconductor is observed in a binary boron-nitrogen-centered 2D polymer. Our findings pioneer Stoner and Mott-Hubbard magnetism emerging in the electronic π-system of crystalline-conjugated 2D polymers.

Real-Time Imaging of On-Surface Ullmann Polymerization Reveals an Inhibiting Effect of Adatoms

Ullmann coupling is a widely used reaction for the on-surface growth of low-dimensional carbon nanomaterials. The irreversible nature of this reaction prevents the "self-healing" of defects, and a detailed knowledge of its mechanism is therefore essential to enable the growth of extended ordered structures. However, the dynamics of the Ullmann polymerization remain largely unexplored, as coupling events occur on a timescale faster than conventional scanning probe microscopy imaging frequencies. Here, we reveal the dynamics of these surface events using high-speed variable-temperature scanning tunneling microscopy (STM) (10 frames per second). Performing the measurements at the onset reaction temperatures provides an unprecedented description of the evolution of organometallic (OM) and covalent surface species during the Ullmann polymerization of para-dibromobenzene on Cu(110). Our results demonstrate the existence of an intermediate OM phase with Cu adatoms that inhibits the polymerization. These observations now complete the picture of the pathways of on-surface Ullmann polymerization, which includes the complex interplay of the phenylene moieties and metal atoms. Our work demonstrates the unique capability of high-speed STM to capture the dynamics of molecular self-assembly and coupling.

2D Conjugated Polymer Thin Films for Organic Electronics: Opportunities and Challenges

2D conjugated polymers (2DCPs) possess extended in-plane π-conjugated lattice and out-of-plane π-π stacking, which results in enhanced electronic performance and potentially unique band structures. These properties, along with predesignability, well-defined channels, easy postmodification, and order structure attract extensive attention from material science to organic electronics. In this review, the recent advance in the interfacial synthesis and conductivity tuning strategies of 2DCP thin films, as well as their application in organic electronics is summarized. Furthermore, it is shown that, by combining topology structure design and targeted conductivity adjustment, researchers have fabricated 2DCP thin films with predesigned active groups, highly ordered structures, and enhanced conductivity. These films exhibit great potential for various thin-film organic electronics, such as organic transistors, memristors, electrochromism, chemiresistors, and photodetectors. Finally, the future research directions and perspectives of 2DCPs are discussed in terms of the interfacial synthetic design and structure engineering for the fabrication of fully conjugated 2DCP thin films, as well as the functional manipulation of conductivity to advance their applications in future organic electronics.

Unconventional Band Structure via Combined Molecular Orbital and Lattice Symmetries in a Surface-Confined Metallated Graphdiyne Sheet

Graphyne (GY) and graphdiyne (GDY)-based monolayers represent the next generation 2D carbon-rich materials with tunable structures and properties surpassing those of graphene. However, the detection of band formation in atomically thin GY/GDY analogues has been challenging, as both long-range order and atomic precision have to be fulfilled in the system. The present work reports direct evidence of band formation in on-surface synthesized metallated Ag-GDY sheets with mesoscopic (≈1 µm) regularity. Employing scanning tunneling and angle-resolved photoemission spectroscopies, energy-dependent transitions of real-space electronic states above the Fermi level and formation of the valence band are respectively observed. Furthermore, density functional theory (DFT) calculations corroborate the observations and reveal that doubly degenerate frontier molecular orbitals on a honeycomb lattice give rise to flat, Dirac and Kagome bands close to the Fermi level. DFT modeling also indicates an intrinsic band gap for the pristine sheet material, which is retained for a bilayer with h-BN, whereas adsorption-induced in-gap electronic states evolve at the synthesis platform with Ag-GDY decorating the (111) facet of silver. These results illustrate the tremendous potential for engineering novel band structures via molecular orbital and lattice symmetries in atomically precise 2D carbon materials.

Growth of Single Crystalline 2D Materials beyond Graphene on Non-metallic Substrates

The advent of 2D materials has ushered in the exploration of their synthesis, characterization and application. While plenty of 2D materials have been synthesized on various metallic substrates, interfacial interaction significantly affects their intrinsic electronic properties. Additionally, the complex transfer process presents further challenges. In this context, experimental efforts are devoted to the direct growth on technologically important semiconductor/insulator substrates. This review aims to uncover the effects of substrate on the growth of 2D materials. The focus is on non-metallic substrate used for epitaxial growth and how this highlights the necessity for phase engineering and advanced characterization at atomic scale. Special attention is paid to monoelemental 2D structures with topological properties. The conclusion is drawn through a discussion of the requirements for integrating 2D materials with current semiconductor-based technology and the unique properties of heterostructures based on 2D materials. Overall, this review describes how 2D materials can be fabricated directly on non-metallic substrates and the exploration of growth mechanism at atomic scale.

Recent progress in on-surface synthesis of nanoporous graphene materials

Nanoporous graphene (NPG) materials are generated by removing internal degree-3 vertices from graphene and introducing nanopores with specific topological structures, which have been widely explored and exploited for applications in electronic devices, membranes, and energy storage. The inherent properties of NPGs, such as the band structures, field effect mobilities and topological properties, are crucially determined by the geometric structure of nanopores. On-surface synthesis is an emerging strategy to fabricate low-dimensional carbon nanostructures with atomic precision. In this review, we introduce the progress of on-surface synthesis of atomically precise NPGs, and classify NPGs from the aspects of element types, topological structures, pore shapes, and synthesis strategies. We aim to provide a comprehensive overview of the recent advancements, promoting interdisciplinary collaboration to further advance the synthesis and applications of NPGs.

Dynamic Knoevenagel Condensation of p-Tolyl Carbenium Cations

We report here that methyl-substituted hexamethoxytrityl (HMT) and the derived trioxatriangulene (TOTA) salts react with aldehydes, forming π-extended tristyryl-substituted HMT and TOTA dyes via a dynamic Knoevenagel condensation. These cations undergo a reversible electrochemical (or chemical) reduction, forming neutral radicals, including the first persistent TOTA radical. This reaction represents a promising platform to generate novel π-conjugated systems.

Possibilities and Limitations of Kinetic Studies in On-Surface Synthesis by Real Time X-ray Photoelectron Spectroscopy

The kinetics of coupling reactions on surfaces can be quantitatively studied in real time by X-ray Photoelectron Spectroscopy (XPS). From fitting experimental data, kinetic reaction parameters such as the rate constant's pre-exponential and activation energy can be deduced and compared to quantum chemical simulations. To elucidate the possibilities and limitations of this approach, we propose studies in which experimental data are first simulated and subsequently fitted. Knowing the exact kinetic parameters used in the simulation allows one to evaluate the accuracy of the fit result. Here, several experimental influences, such as the data point density and the addition of noise, are explored for a model reaction with first-order kinetics. The proposed procedure sheds light on the accuracy with which kinetic parameters can be derived and may also help in the design of future experiments.

A compound eye-like morphology formed through hexagonal array of hemispherical microparticles where an alkyl-fullerene derivative self-assembled at atmosphere-sealed air/water interface

Self-assembly processes are widely used in nature to form hierarchically organized structures, prompting us to investigate such processes at the macroscopic scale. We report an unprecedented approach toward the self-assembly of alkyl-fullerene (C60) derivatives into a hexagonal array of hemispherical microparticles akin to the morphology of a compound eye. The method includes casting solvated alkyl-C60compound on an air/water interface followed by controlled evaporation of the solvent under atmosphere-sealed conditions. This leads to the formation of a thin film floating on water with a diameter of up to 1.3 centimeters and exhibiting a hexagonally-packed hemispherical structure with a diameter of approximately 38µm. Various measurements of the formed film reveal that amorphousness is necessary for suppressing uncontrollable crystallization, which affects the microparticle size and film formation mechanism. We tested the feasibility of this approach for the self-assembly of a relatively common C60derivative, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), resulting in the formation of a film with a similar pattern of hexagonally-packed larger microparticles approximately 152µm in size of diameter.

A high density nanopore 3-triangulene kagome lattice

Nanopore-containing two-dimensional materials have been explored for a wide range of applications including filtration, sensing, catalysis, energy storage and conversion. Triangulenes have recently been experimentally synthesized in a variety of sizes. In this regard, using these systems as building blocks, we theoretically examined 3-triangulene kagome crystals with inherent holes of ∼12 Å diameter and a greater density array of nanopores (≥1013 cm-2) compared to conventional 2D systems. The energetic, electronic, and transport properties of pristine and B/N-doped 3-triangulene kagome crystals were evaluated through a combination of density functional theory and non-equilibrium Green's function method. The simulated scanning tunneling microscopy images clearly capture electronic perturbation around the doped sites, which can be used to distinguish the pristine system from the doped systems. The viability of precisely controlling the band structure and transport properties by changing the type and concentration of doping atoms is demonstrated. The findings presented herein can potentially widen the applicability of these systems that combine unique electronic properties and intrinsically high-density pores, which can pave the way for the next generation of nanopore-based devices.

Deciphering the factors influencing electric field mediated polymerization and depolymerization at the solution-solid interface

Strong and oriented electric fields are known to influence structure as well as reactivity. The strong electric field (EF) between the tip of a scanning tunneling microscope (STM) and graphite has been used to modulate two-dimensional (2D) polymerization of aryl boronic acids where switching the polarity of the substrate bias enabled reversible transition between self-assembled molecular networks of monomers and crystalline 2D polymer (2DP) domains. Here, we untangle the different factors influencing the EF-mediated (de)polymerization of a boroxine-based 2DP on graphite. The influence of the solvent was systematically studied by varying the nature from polar protic to polar aprotic to non-polar. The effect of monomer concentration was also investigated in detail with a special focus on the time-dependence of the transition. Our experimental observations indicate that while the nucleation of 2DP domains is not initiated by the applied electric field, their depolymerization and subsequent desorption, are a consequence of the change in the polarity of the substrate bias within the area scanned by the STM tip. We conclude that the reversible transition is intimately linked to the bias-induced adsorption and desorption of the monomers, which, in turn, could drive changes in the local concentration of the monomers.

Topology selectivity of a conformationally flexible precursor through selenium doping

Conformational arrangements within nanostructures play a crucial role in shaping the overall configuration and determining the properties, for example in covalent/metal organic frameworks. In on-surface synthesis, conformational diversity often leads to uncontrollable or disordered structures. Therefore, the exploration of controlling and directing the conformational arrangements is significant in achieving desired nanoarchitectures. Herein, a conformationally flexible precursor 2,4,6-tris(3-bromophenyl)-1,3,5-triazine is employed, and a random phase consisting of C3h and Cs conformers is firstly obtained after deposition of the precursor on Cu(111) at room temperature to 365 K. At low coverage (0.01 ML) selenium doping, we achieve the selectivity of the C3h conformer and improve the nanopore structural homogeneity. The ordered two-dimensional metal organic nanostructure can be fulfilled by selenium doping from room temperature to 365 K. The formation of the conformationally flexible precursor on Cu(111) is explored through the combination of high-resolution scanning tunneling microscopy and non-contact atomic force microscopy. The regulation of energy diagrams in the absence or presence of the Se atom is revealed by density functional theory calculations. These results can enrich the on-surface synthesis toolbox of conformationally flexible precursors, for the design of complex nanoarchitectures, and for future development of engineered nanomaterials.

Universal inter-molecular radical transfer reactions on metal surfaces

On-surface synthesis provides tools to prepare low-dimensional supramolecular structures. Traditionally, reactive radicals are a class of single-electron species, serving as exceptional electron-withdrawing groups. On metal surfaces, however, such species are affected by conduction band screening effects that may even quench their unpaired electron characteristics. As a result, radicals are expected to be less active, and reactions catalyzed by surface-stabilized radicals are rarely reported. Herein, we describe a class of inter-molecular radical transfer reactions on metal surfaces. With the assistance of aryl halide precursors, the coupling of terminal alkynes is steered from non-dehydrogenated to dehydrogenated products, resulting in alkynyl-Ag-alkynyl bonds. Dehalogenated molecules are fully passivated by detached hydrogen atoms. The reaction mechanism is unraveled by various surface-sensitive technologies and density functional theory calculations. Moreover, we reveal the universality of this mechanism on metal surfaces. Our studies enrich the on-surface synthesis toolbox and develop a pathway for producing low-dimensional organic materials.

Artificial kagome lattices of Shockley surface states patterned by halogen hydrogen-bonded organic frameworks

Artificial electronic kagome lattices may emerge from electronic potential landscapes using customized structures with exotic supersymmetries, benefiting from the confinement of Shockley surface-state electrons on coinage metals, which offers a flexible approach to realizing intriguing quantum phases of matter that are highly desired but scarce in available kagome materials. Here, we devise a general strategy to construct varieties of electronic kagome lattices by utilizing the on-surface synthesis of halogen hydrogen-bonded organic frameworks (XHOFs). As a proof of concept, we demonstrate three XHOFs on Ag(111) and Au(111) surfaces, which correspondingly deliver regular, breathing, and chiral breathing diatomic-kagome lattices with patterned potential landscapes, showing evident topological edge states at the interfaces. The combination of scanning tunnelling microscopy and noncontact atomic force microscopy, complemented by density functional theory and tight-binding calculations, directly substantiates our method as a reliable and effective way to achieve electronic kagome lattices for engineering quantum states.

Distance-Dependent Evolution of Electronic States in Kagome-Honeycomb Lateral Heterostructures in FeSn

In this work, we demonstrate the formation and electronic influence of lateral heterointerfaces in FeSn containing Kagome and honeycomb layers. Lateral heterostructures offer spatially resolved property control, enabling the integration of dissimilar materials and promoting phenomena not typically observed in vertical heterostructures. Using the molecular beam epitaxy technique, we achieve a controllable synthesis of lateral heterostructures in the Kagome metal FeSn. With scanning tunneling microscopy/spectroscopy in conjunction with first-principles calculations, we provide a comprehensive understanding of the bonding motif connecting the Fe3Sn-terminated Kagome and Sn2-terminated honeycomb surfaces. More importantly, we reveal a distance-dependent evolution of the electronic states in the vicinity of the heterointerfaces. This evolution is significantly influenced by the orbital character of the flat bands. Our findings suggest an approach to modulate the electronic properties of the Kagome lattice, which should be beneficial for the development of future quantum devices.

Prediction of highly stable 2D carbon allotropes based on azulenoid kekulene

Despite enormous interest in two-dimensional (2D) carbon allotropes, discovering stable 2D carbon structures with practically useful electronic properties presents a significant challenge. Computational modeling in this work shows that fusing azulene-derived macrocycles - azulenoid kekulenes (AK) - into graphene leads to the most stable 2D carbon allotropes reported to date, excluding graphene. Density functional theory predicts that placing the AK units in appropriate relative positions in the graphene lattice opens the 0.54 eV electronic bandgap and leads to the appearance of the remarkable 0.80 eV secondary gap between conduction bands - a feature that is rare in 2D carbon allotropes but is known to enhance light absorption and emission in 3D semiconductors. Among porous AK structures, one material stands out as a stable narrow-multigap (0.36 and 0.56 eV) semiconductor with light charge carriers (me = 0.17 m0,  mh = 0.19 m0), whereas its boron nitride analog is a wide-multigap (1.51 and 0.82 eV) semiconductor with light carriers (me = 0.39 m0,  mh = 0.32 m0). The multigap engineering strategy proposed here can be applied to other carbon nanostructures creating novel 2D materials for electronic and optoelectronic applications.

Tailoring giant quantum transport anisotropy in nanoporous graphenes under electrostatic disorder

During the last 15 years bottom-up on-surface synthesis has been demonstrated as an efficient way to synthesize carbon nanostructures with atomic precision, opening the door to unprecedented electronic control at the nanoscale. Nanoporous graphenes (NPGs) fabricated as two-dimensional arrays of graphene nanoribbons (GNRs) represent one of the key recent breakthroughs in the field. NPGs interestingly display in-plane transport anisotropy of charge carriers, and such anisotropy was shown to be tunable by modulating quantum interference. Herein, using large-scale quantum transport simulations, we show that electrical anisotropy in NPGs is not only resilient to disorder but can further be massively enhanced by its presence. This outcome paves the way to systematic engineering of quantum transport in NPGs as a novel concept for efficient quantum devices and architectures.

Recent advances in two-dimensional polymers: synthesis, assembly and energy-related applications

Two-dimensional polymers (2DPs) are a class of 2D crystalline polymer materials with definite structures, which have outstanding physical-chemical and electronic properties. They cleverly link organic building units through strong covalent bonds and can construct functional 2DPs through reasonable design and selection of different monomer units to meet various application requirements. As promising energy materials, 2DPs have developed rapidly in recent years. This review first introduces the basic overview of 2DPs, such as their historical development, inherent 2D characteristics and diversified topological advantages, followed by the summary of the typical 2DP synthesis methods recently (including "top-down" and "bottom-up" methods). The latest research progress in assembly and processing of 2DPs and the energy-related applications in energy storage and conversion are also discussed. Finally, we summarize and prospect the current research status, existing challenges, and future research directions of 2DPs.

On-Surface Synthesis of a Radical 2D Supramolecular Organic Framework

The design of supramolecular organic radical cages and frameworks is one of the main challenges in supramolecular chemistry. Their interesting material properties and wide applications make them very promising for (photo)redox catalysis, sensors, or host-guest spin-spin interactions. However, the high reactivity of radical organic systems makes the design of such supramolecular radical assemblies challenging. Here, we report the on-surface synthesis of a purely organic supramolecular radical framework on Au(111), by combining supramolecular and on-surface chemistry. We employ a tripodal precursor, functionalized with 7-azaindole groups that, catalyzed by a single gold atom on the surface, forms a radical molecular product constituted by a π-extended fluoradene-based radical core. The radical products self-assemble through hydrogen bonding, leading to extended 2D domains ordered in a Kagome-honeycomb lattice. This approach demonstrates the potential of on-surface synthesis for developing 2D supramolecular radical organic chemistry.

Deceptive orbital confinement at edges and pores of carbon-based 1D and 2D nanoarchitectures

The electronic structure defines the properties of graphene-based nanomaterials. Scanning tunneling microscopy/spectroscopy (STM/STS) experiments on graphene nanoribbons (GNRs), nanographenes, and nanoporous graphene (NPG) often determine an apparent electronic orbital confinement into the edges and nanopores, leading to dubious interpretations such as image potential states or super-atom molecular orbitals. We show that these measurements are subject to a wave function decay into the vacuum that masks the undisturbed electronic orbital shape. We use Au(111)-supported semiconducting gulf-type GNRs and NPGs as model systems fostering frontier orbitals that appear confined along the edges and nanopores in STS measurements. DFT calculations confirm that these states originate from valence and conduction bands. The deceptive electronic orbital confinement observed is caused by a loss of Fourier components, corresponding to states of high momentum. This effect can be generalized to other 1D and 2D carbon-based nanoarchitectures and is important for their use in catalysis and sensing applications.

Galvanic-Replacement-Assisted Synthesis of Nanostructured Silver-Surface for SERS Characterization of Two-Dimensional Polymers

Surface-enhanced Raman scattering (SERS) spectroscopy is a powerful technology in trace analysis. However, the wide applications of SERS in practice are limited by the expensive substrate materials and the complicated preparation processes. Here we report a simple and economical galvanic-replacement-assisted synthesis route to prepare Ag nanoparticles on Cu(0) foil (nanoAg@Cu), which can be directly used as SERS substrate. The fabrication process is fast (ca. 10 min) and easily scaled up to centimeters or even larger. In addition, the morphology of the nanoAg@Cu (with Ag particles size from 30 nm to 160 nm) can be adjusted by various additives (e.g., amino-containing ligands). Finally, we show that the as-prepared nanoAg@Cu can be used for SERS characterization of two-dimensional polymers, and ca. 298 times relative enhancement of Raman intensity is achieved. This work offers a simple and economical strategy for the scalable fabrication of silver-based SERS substrate in thin film analysis.

Electronic Band Engineering of Two-Dimensional Kagomé Polymers

Two-dimensional conjugated polymers (2DCPs) are an emerging class of materials that exhibit properties similar to graphene yet do not have the limitation of zero bandgap. On-surface synthesis provides exceptional control on the polymerization reaction, allowing tailoring properties by choosing suitable monomers. Heteroatom-substituted triangulene 2DCPs constitute a playing ground for such a design and are predicted to exhibit graphene-like band structures with high charge mobility and characteristic Dirac cones in conduction or valence states. However, measuring these properties experimentally is challenging and requires long-range-ordered polymers, preferably with an epitaxial relationship with the substrate. Here, we investigate the electronic properties of a mesoscale-ordered carbonyl-bridged triphenylamine 2DCP (P2TANGO) and demonstrate the presence of a Dirac cone by combining angle-resolved photoemission spectroscopy (ARPES) with density functional theory (DFT) calculations. Moreover, we measure the absolute energy position of the Dirac cone with respect to the vacuum level. We show that the bridging functionality of the triangulene (ether vs carbonyl) does not significantly perturb the band structure but strongly affects the positioning of the bands with respect to the Au(111) states and allows control of the ionization energy of the polymer. Our results provide proof of the controllable electronic properties of 2DCPs and bring us closer to their use in practical applications.

Revolutionizing the structural design and determination of covalent-organic frameworks: principles, methods, and techniques

Covalent organic frameworks (COFs) represent an important class of crystalline porous materials with designable structures and functions. The interconnected organic monomers, featuring pre-designed symmetries and connectivities, dictate the structures of COFs, endowing them with high thermal and chemical stability, large surface area, and tunable micropores. Furthermore, by utilizing pre-functionalization or post-synthetic functionalization strategies, COFs can acquire multifunctionalities, leading to their versatile applications in gas separation/storage, catalysis, and optoelectronic devices. Our review provides a comprehensive account of the latest advancements in the principles, methods, and techniques for structural design and determination of COFs. These cutting-edge approaches enable the rational design and precise elucidation of COF structures, addressing fundamental physicochemical challenges associated with host-guest interactions, topological transformations, network interpenetration, and defect-mediated catalysis.

Two-Dimensional Conjugated Polymers: a New Choice For Organic Thin-Film Transistors

Organic thin-film transistors (OTFTs) as a vital component among transistors have shown great potential in smart sensing, flexible displays, and bionics due to their flexibility, biocompatibility and customizable chemical structures. Even though linear conjugated polymer semiconductors are common for constructing channel materials of OTFTs, advanced materials with high charge carrier mobility, tunable band structure, robust stability, and clear structure-property relationship are indispensable for propelling the evolution of OTFTs. Two-dimensional conjugated polymers (2DCPs), featured with conjugated lattice, tailorable skeletons, and functional porous structures, match aforementioned criteria closely. In this review, we firstly introduce the synthesis of 2DCP thin films, focusing on their characteristics compatible with the channels of OTFTs. Subsequently, the physics and operating mechanisms of OTFTs and the applications of 2DCPs in OTFTs are summarized in detail. Finally, the outlook and perspective in the field of OTFTs using 2DCPs are provided as well.

On-Surface Synthesis of Multiple Cu Atom-Bridged Organometallic Oligomers

A metal-metal bond between coordination complexes has the nature of a covalent bond in hydrocarbons. While bimetallic and trimetallic compounds usually have three-dimensional structures in solution, the high directionality and robustness of the bond can be applied for on-surface syntheses. Here, we present a systematic formation of complex organometallic oligomers on Cu(111) through sequential ring opening of 11,11,12,12-tetraphenyl-1,4,5,8-tetraazaanthraquinodimethane and bonding of phenanthroline derivatives by multiple Cu atoms. A detailed characterization with a combination of scanning tunneling microscopy and density functional theory calculations revealed the role of the Cu adatoms in both enantiomers of the chiral oligomers. Furthermore, we found sufficient strength of the bonds against sliding friction by manipulating the oligomers up to a hexamer. This finding may help to increase the variety of organometallic nanostructures on surfaces.

On-surface synthesis of nitrogen-doped nanographene with an [18]annulene pore on Ag(111)

On-surface synthesis is of importance to fabricate low dimensional carbon-based nanomaterials with atomic precision. Here, we synthesize nitrogen-doped nanographene with an [18]annulene pore and its dimer through sequential reactions of debromination, aryl-aryl coupling, cyclodehydrogenation and C-N coupling on Ag(111) from 3,12-dibromo-7,8-diaza[5]helicene. The inner structures of the products were characterized with scanning tunneling microscopy with a CO terminated tip at low temperature. Furthermore, the first four unoccupied electronic states of the nanographene were investigated with a combination of scanning tunneling spectroscopy and theoretical calculations. Except for the LUMO + 2 state observed at +1.3 V, the electronic states at 500 mV, 750 mV and 1.9 V were attributed to the superatom molecular orbitals at the [18]annulene pore, which were significantly shifted towards the Fermi level due to the hybridization with the confined surface state.

On-Surface Two-Dimensional Polymerization: Advances, Challenges, and Prospects

Two-dimensional polymers (2DPs) are molecularly thin networks consisting of monomers covalently linked in at least two directions in the molecular plane. Because of the unique structural features and emergent physicochemical properties, 2DPs promise application potentials in catalysis, chemical sensing, and organic electronic devices. On-surface synthesis is of great interest to fabricate 2DPs with atomic precision, and the properties of the 2DPs can be characterized in situ through scanning probe techniques. In this Perspective, we first introduce the recent developments of on-surface 2D polymerization, including the design principle, the synthetic reactions, and the factors affecting the synthesis of 2DPs on surface. Then, we summarize some major challenges in this field, including the fabrication of high-quality 2DPs and the study of the intrinsic electronic properties of 2DPs, and we discuss some of the available solutions to address these issues.

Magnetic Coupling Control in Triangulene Dimers

Metal-free magnetism remains an enigmatic field, offering prospects for unconventional magnetic and electronic devices. In the pursuit of such magnetism, triangulenes, endowed with inherent spin polarization, are promising candidates to serve as monomers to construct extended structures. However, controlling and enhancing the magnetic interactions between the monomers persist as a significant challenge in molecular spintronics, as so far only weak antiferromagnetic coupling through the linkage has been realized, hindering their room temperature utilization. Herein, we investigate 24 triangulene dimers using first-principles calculations and demonstrate their tunable magnetic coupling (J), achieving unprecedented strong J values of up to -144 meV in a non-Kekulé dimer. We further establish a positive correlation between bandgap, electronic coupling, and antiferromagnetic interaction, thereby providing molecular-level insights into enhancing magnetic interactions. By twisting the molecular fragments, we demonstrate an effective and feasible approach to control both the sign and strength of J by tuning the balance between potential and kinetic exchanges. We discover that J can be substantially boosted at planar configurations up to -198 meV. We realize ferromagnetic coupling in nitrogen-doped triangulene dimers at both planar and largely twisted configurations, representing the first example of ferromagnetic triangulene dimers that cannot be predicted by the Ovchinnikov rule. This work thus provides a practical strategy for augmenting magnetic coupling and open up new avenues for metal-free ferromagnetism.

A Thiophene Backbone Enables Two-Dimensional Poly(arylene vinylene)s with High Charge Carrier Mobility

Linear conjugated polymers have attracted significant attention in organic electronics in recent decades. However, despite intrachain π-delocalization, interchain hopping is their transport bottleneck. In contrast, two-dimensional (2D) conjugated polymers, as represented by 2D π-conjugated covalent organic frameworks (2D c-COFs), can provide multiple conjugated strands to enhance the delocalization of charge carriers in space. Herein, we demonstrate the first example of thiophene-based 2D poly(arylene vinylene)s (PAVs, 2DPAV-BDT-BT and 2DPAV-BDT-BP, BDT=benzodithiophene, BT=bithiophene, BP=biphenyl) via Knoevenagel polycondensation. Compared with 2DPAV-BDT-BP, the fully thiophene-based 2DPAV-BDT-BT exhibits enhanced planarity and π-delocalization with a small band gap (1.62 eV) and large electronic band dispersion, as revealed by the optical absorption and density functional calculations. Remarkably, temperature-dependent terahertz spectroscopy discloses a unique band-like transport and outstanding room-temperature charge mobility for 2DPAV-BDT-BT (65 cm2  V-1  s-1 ), which far exceeds that of the linear PAVs, 2DPAV-BDT-BP, and the reported 2D c-COFs in the powder form. This work highlights the great potential of thiophene-based 2D PAVs as candidates for high-performance opto-electronics.

Room Temperature On-Surface Synthesis of a Vinylene-Linked Single Layer Covalent Organic Framework

Conjugated single-layered two-dimensional covalent organic frameworks are flat and extended polymer networks with a unique combination of material properties, giving rise to potential applications in sensing, optoelectronics, and photonics. Despite their great potential, thus far only a few reactions to access such extended conjugated 2D polymers have been reported. Here, the on-surface polymerization of the first vinylene-linked single layered two-dimensional covalent organic framework using reversible Knoevenagel polycondensation under solvothermal conditions is described. Self-assembly of the two monomer building blocks at the solid-liquid interface led to the formation of extended covalent networks at room temperature without the need of additional catalysts or reagents. The described approach grants access to extended conjugated 2D polymers under unprecedentedly mild conditions and paves the way to new hybrid material systems.