1
|
Rede D, Vilarinho R, Moreira JA, Delerue-Matos C, Fernandes VC. Investigating the impact of microplastics on triphenyl phosphate adsorption in soil: Insights into environmental factors and soil properties. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 944:173745. [PMID: 38844227 DOI: 10.1016/j.scitotenv.2024.173745] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/03/2024] [Revised: 05/20/2024] [Accepted: 06/02/2024] [Indexed: 06/18/2024]
Abstract
Microplastics (MPs) pose significant environmental pollution problems owing to their diverse properties such as various shapes, sizes, compositions, surface features, and levels of degradation. Moreover, their interactions with toxic chemicals and aging processes add complexity to environmental research. This study investigated the adsorption of triphenyl phosphate (TPhP) in soil-only, MP-only, and soil-MP simulated environments under different conditions. The experiment involved three phases: initial exposure to a pH of 5.5 under fluorescent light, subsequent introduction of ultraviolet (UV) radiation, and pH adjustment to 4.0 and 7.0, while maintaining UV exposure, each lasting 7 days. The study found that environmental factors affected TPhP sorption capacity, with higher adsorption observed under UV radiation and acidic conditions. In contrast, the MP-only systems showed no clear trend for TPhP adsorption, suggesting kinetic limitations. When MPs were added to the soil, the adsorption dynamics were altered, with varying adsorption capacities observed for different MP polymers under different aging conditions. ATR-FTIR spectroscopy, micro-Raman spectroscopy, and water contact angle measurements suggested potential photooxidation processes and changes in the surface hydrophobicity of the MPs subjected to simulated environmental conditions. This study provides valuable insights into the interplay between soil properties, MP characteristics, and environmental factors in determining TPhP sorption dynamics in soil-MP environments.
Collapse
Affiliation(s)
- Diana Rede
- REQUIMTE/LAQV, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, Rua Dr. António Bernandino de Almeida 431, 4249-015 Porto, Portugal; Departmento de Química e Bioquimica, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre s/n, 4169- 007 Porto, Portugal
| | - Rui Vilarinho
- Departmento de Física e Astronomia, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre s/n, 4169-007 Porto, Portugal; IFIMUP-Instituto de Física dos Materiais Avançados, Nanotecnologia e Fotónica, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre s/n, 4169-007 Porto, Portugal
| | - Joaquim Agostinho Moreira
- Departmento de Física e Astronomia, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre s/n, 4169-007 Porto, Portugal; IFIMUP-Instituto de Física dos Materiais Avançados, Nanotecnologia e Fotónica, Faculdade de Ciências, Universidade do Porto, Rua do Campo Alegre s/n, 4169-007 Porto, Portugal
| | - Cristina Delerue-Matos
- REQUIMTE/LAQV, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, Rua Dr. António Bernandino de Almeida 431, 4249-015 Porto, Portugal
| | - Virgínia Cruz Fernandes
- REQUIMTE/LAQV, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, Rua Dr. António Bernandino de Almeida 431, 4249-015 Porto, Portugal.
| |
Collapse
|
2
|
Li H, Jiang Y, Gu Y, Chen C, Yu J, Wang C, Shi C, Pan R, Chen H. Environmentally persistent free radicals on photoaging microplastics shortens longevity via inducing oxidative stress in Caenorhabditis elegans. CHEMOSPHERE 2024; 361:142560. [PMID: 38851504 DOI: 10.1016/j.chemosphere.2024.142560] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/11/2023] [Revised: 03/20/2024] [Accepted: 06/05/2024] [Indexed: 06/10/2024]
Abstract
Microplastics (MPs) are ubiquitous environmental contaminants that exert multiple toxicological effects. Current studies have mainly focused on modeled or unaged MPs, which lack environmental relevance. The generation and toxicity of environmentally persistent free radicals (EPFRs) on photoaging polystyrene (PS) have not been well studied, and the role of EPFRs on the toxic effects of photoaged PS is easily ignored. Photoaging primarily produces EPFRs, followed by an increase in reactive oxygen species (ROS) content and oxidative potential, which alter the physicochemical properties of photoaged PS. The mean lifespan and lipofuscin content were significantly altered after acute exposure to photoaged PS for 45 d (PS-45) and 60 d (PS-60) in Caenorhabditis elegans. Intestinal ROS and gst-4::GFP expression were enhanced, concomitant with the upregulation of associated genes. Treatment with N-acetyl-l-cysteine by radical quenching test significantly decreased EPFRs levels on the aged PS and inhibited the acceleration of the aging and oxidative stress response in nematodes. Pearson's correlation analysis also indicated that the EPFRs levels were significantly associated with these factors. Thus, the EPFRs generated on photoaged PS contribute to the acceleration of aging by oxidative stress. This study provides new insights into the potential toxicity and highlights the need to consider the role of EPFRs in the toxicity assessment of photoaged PS.
Collapse
Affiliation(s)
- Hui Li
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Yongqi Jiang
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Yulun Gu
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Chao Chen
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Jun Yu
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Chen Wang
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Chongli Shi
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Ruolin Pan
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China
| | - Haibo Chen
- Institute for Environmental Pollution and Health, School of Environmental and Chemical Engineering, Shanghai University, Shanghai, 200444, China.
| |
Collapse
|
3
|
Zjacić JP, Katančić Z, Kovacic M, Kusic H, Hrnjak Murgić Z, Dionysiou DD, Karamanis P, Loncaric Bozic A. Fragmentation of polypropylene into microplastics promoted by photo-aging; release of metals, toxicity and inhibition of biodegradability. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 935:173344. [PMID: 38772480 DOI: 10.1016/j.scitotenv.2024.173344] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/22/2024] [Revised: 05/07/2024] [Accepted: 05/16/2024] [Indexed: 05/23/2024]
Abstract
The widespread presence of microplastics (MP) in water represents an environmental problem, not only because of the harmful effects of their size and potential to vector other pollutants, but also because of the release of additives, degradation products and residues contained in the polymer matrix. The latter includes metallic catalysts, which are often overlooked. This study focuses on the photo-aging of polypropylene (PP) and the resulting structural changes that promote its fragmentation microplastics (PP-MPs) and release of metals, as well as the resulting toxicity of leachates and their potential to inhibit biodegradation of organics in water. The pristine, photo-aged and waste PP are ground under the same regime to assess susceptibility to fragmentation. Obtained PP-MPs are submitted to leaching tests; the release of organics and metals is monitored by Total Organic Carbon (TOC) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analysis, respectively. The leachates are assessed for their toxicity against Vibrio fischeri, Daphnia magna and Pseudokirchneriella subcapitata and their influence on the biodegradability of the glucose solution. Photo-aging induced changes in the crystallinity and morphology of the PP and manifested in the abundance of smaller MPs, as revealed by the particle size distribution. In the case of pristine PP, all particles were > 100 μm in size, while aged PP yielded significant mass fraction of MPs <100 μm. The toxicity of leachates from aged PP-MPs is higher than that of pristine and exhibits a positive correlation with portion of metals released. The biodegradability of glucose is strongly inhibited by PP-MPs leachates containing a mixture of metals in trace concentrations.
Collapse
Affiliation(s)
- Josipa Papac Zjacić
- Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia
| | - Zvonimir Katančić
- Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia
| | - Marin Kovacic
- Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia
| | - Hrvoje Kusic
- Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia; University North, Trg dr. Žarka Dolinara 1, 48000 Koprivnica, Croatia.
| | - Zlata Hrnjak Murgić
- Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia
| | - Dionysios D Dionysiou
- Environmental Engineering and Science Program, Department of Chemical and Environmental Engineering, University of Cincinnati, Cincinnati, OH 45221-0012, USA
| | - Panaghiotis Karamanis
- Université de Pau et des Pays de l'Adour, E2S UPPA, CNRS, IPREM, Hélioparc Pau Pyrénées, 2 Rue de president Angot, 64053 Pau, France
| | - Ana Loncaric Bozic
- Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia
| |
Collapse
|
4
|
Karwadiya J, Lützenkirchen J, Darbha GK. Retention of ZnO nanoparticles onto polypropylene and polystyrene microplastics: Aging-associated interactions and the role of aqueous chemistry. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 352:124097. [PMID: 38703985 DOI: 10.1016/j.envpol.2024.124097] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2023] [Revised: 04/29/2024] [Accepted: 04/30/2024] [Indexed: 05/06/2024]
Abstract
Microplastics (MPs) are pervasive and undergo environmental aging processes, which alters potential interaction with the co-contaminants. Hence, to assess their contaminant-carrying capacity, mimicking the weathering characteristics of secondary MPs is crucial. To this end, the present study investigated the interaction of Zinc oxide (nZnO) nanoparticles with non-irradiated (NI) and UV-irradiated (UI) forms of the most abundant MPs, such as polypropylene (PP) and polystyrene (PS), in aqueous environments. SEM images revealed mechanical abrasions on the surfaces of NI-MPs and their subsequent photoaging caused the formation of close-ended and open-ended cracks in UI-PP and UI-PS, respectively. Batch-sorption experiments elucidated nZnO uptake kinetics by PP and PS MPs, suggesting a sorption-desorption pathway due to weaker and stronger sorption sites until equilibrium was achieved. UI-PP showed higher nZnO (∼3000 mg/kg) uptake compared to NI-PP, while UI-PS showed similar or slightly decreased nZnO (∼2000 mg/kg) uptake compared to NI-PS. FTIR spectra and zeta potential measurements revealed electrostatic interaction as the dominant interaction mechanism. Higher nZnO uptake by MPs was noted between pH 6.5 and 8.5, whereas it decreased beyond this range. Despite DOM, MPs always retained ∼874 mg/kg nZnO irrespective of MPs type and extent of aging. The experimental results in river water showed higher nZnO uptake on MPs compared to DI water, attributed to mutual effect of ionic competition, DOM, and MP hydrophobicity. In the case of humic acids, complex synthetic and natural water matrices, NI-MPs retained more nZnO than UI-MPs, suggesting that photoaged MPs sorb less nZnO under environmental conditions than non-photoaged MPs. These findings enhance our understanding on interaction of the MPs with co-contaminants in natural environments.
Collapse
Affiliation(s)
- Jayant Karwadiya
- Environmental nanoscience laboratory, Department of Earth Sciences, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal, 741246, India
| | - Johannes Lützenkirchen
- Institute of Nuclear Waste Disposal (INE), Karlsruhe Institute of Technology (KIT), 76344, Eggenstein-Leopoldshafen, Germany
| | - Gopala Krishna Darbha
- Environmental nanoscience laboratory, Department of Earth Sciences, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal, 741246, India; Centre for Climate and Environmental Studies, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal, 741246, India.
| |
Collapse
|
5
|
Huang X, Huang J, Lu M, Liu Y, Jiang G, Chang M, Xu W, Dai Z, Zhou C, Hong P, Li C. In situ surface-enhanced Raman spectroscopy for the detection of nanoplastics: A novel approach inspired by the aging of nanoplastics. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 946:174249. [PMID: 38936740 DOI: 10.1016/j.scitotenv.2024.174249] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/28/2023] [Revised: 05/29/2024] [Accepted: 06/22/2024] [Indexed: 06/29/2024]
Abstract
Nanoplastics (NPs) present a hidden risk to organisms and the environment via migration and enrichment. Detecting NPs remains challenging because of their small size, low ambient concentrations, and environmental variability. There is an urgency to exploit detection approaches that are more compatible with real-world environments. Herein, this study provides a surface-enhanced Raman spectroscopy (SERS) technique for the in situ reductive generation of silver nanoparticles (Ag NPs), which is based on photoaging-induced modifications in NPs. The feasibility of generating Ag NPs on the surface of NPs was derived by exploring the photoaging mechanism, which was then utilized to SERS detection. The approach was applied successfully for the detection of polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET) NPs with excellent sensitivity (e.g., as low as 1 × 10-6 mg/mL for PVC NPs, and an enhancement factor (EF) of up to 2.42 × 105 for small size PS NPs) and quantitative analytical capability (R2 > 0.95579). The method was successful in detecting NPs (PS NPs) in lake water. In addition, satisfactory recoveries (93.54-105.70 %, RSD < 12.5 %) were obtained by spiking tap water as well as lake water, indicating the applicability of the method to the actual environment. Therefore, the proposed approach offers more perspectives for testing real environmental NPs.
Collapse
Affiliation(s)
- Xiaoxin Huang
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Zhanjiang 524088, China
| | - Jinchan Huang
- School of Chemistry and Environment, Guangdong Ocean University, Zhanjiang 524088, China
| | - Meilin Lu
- School of Chemistry and Environment, Guangdong Ocean University, Zhanjiang 524088, China
| | - Yu Liu
- School of Chemistry and Environment, Guangdong Ocean University, Zhanjiang 524088, China
| | - Guangzheng Jiang
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Zhanjiang 524088, China
| | - Min Chang
- School of Chemistry and Environment, Guangdong Ocean University, Zhanjiang 524088, China
| | - Wenhui Xu
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Zhanjiang 524088, China
| | - Zhenqing Dai
- School of Chemistry and Environment, Guangdong Ocean University, Zhanjiang 524088, China; Shenzhen Institute of Guangdong Ocean University, Shenzhen 518108, China.
| | - Chunxia Zhou
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Zhanjiang 524088, China
| | - Pengzhi Hong
- College of Food Science and Technology, Guangdong Ocean University, Guangdong Provincial Key Laboratory of Aquatic Product Processing and Safety, Guangdong Province Engineering Laboratory for Marine Biological Products, Guangdong Provincial Engineering Technology Research Center of Seafood, Zhanjiang 524088, China
| | - Chengyong Li
- School of Chemistry and Environment, Guangdong Ocean University, Zhanjiang 524088, China; Shenzhen Institute of Guangdong Ocean University, Shenzhen 518108, China; Guangdong Provincial Key Laboratory of Intelligent Equipment for South China Sea Marine Ranching, Guangdong Ocean University, Zhanjiang 524088, China; Guangdong Provincial Observation and Research Station for Tropical Ocean Environment in Western Coastal Water, Guangdong Ocean University, Zhanjiang 524088, China.
| |
Collapse
|
6
|
Razzell Hollis J, Lavers JL, Bond AL. The use of vibrational spectroscopy and supervised machine learning for chemical identification of plastics ingested by seabirds. JOURNAL OF HAZARDOUS MATERIALS 2024; 476:134996. [PMID: 38972201 DOI: 10.1016/j.jhazmat.2024.134996] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/20/2024] [Revised: 06/17/2024] [Accepted: 06/20/2024] [Indexed: 07/09/2024]
Abstract
Plastic pollution is now ubiquitous in the environment and represents a growing threat to wildlife, who can mistake plastic for food and ingest it. Tackling this problem requires reliable, consistent methods for monitoring plastic pollution ingested by seabirds and other marine fauna, including methods for identifying different types of plastic. This study presents a robust method for the rapid, reliable chemical characterisation of ingested plastics in the 1-50 mm size range using infrared and Raman spectroscopy. We analysed 246 objects ingested by Flesh-footed Shearwaters (Ardenna carneipes) from Lord Howe Island, Australia, and compared the data yielded by each technique: 92 % of ingested objects visually identified as plastic were confirmed by spectroscopy, 98 % of those were low density polymers such as polyethylene, polypropylene, or their copolymers. Ingested plastics exhibit significant spectral evidence of biological contamination compared to other reports, which hinders identification by conventional library searching. Machine learning can be used to identify ingested plastics by their vibrational spectra with up to 93 % accuracy. Overall, we find that infrared is the more effective technique for identifying ingested plastics in this size range, and that appropriately trained machine learning models can be superior to conventional library searching methods for identifying plastics.
Collapse
Affiliation(s)
| | - Jennifer L Lavers
- Bird Group, Natural History Museum, Tring, UK; Gulbali Institute, Charles Sturt University, Wagga Wagga, New South Wales 2678, Australia
| | | |
Collapse
|
7
|
Shashoua Y, Peydaei A, Mortensen MN, Kanstrup AB, Gregory DJ. Physio-chemical degradation of single-use plastics in natural weather and marine environments. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 357:124414. [PMID: 38908677 DOI: 10.1016/j.envpol.2024.124414] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2024] [Revised: 06/18/2024] [Accepted: 06/19/2024] [Indexed: 06/24/2024]
Abstract
Plastic pollution has reached concerning levels globally, with single-use plastic products (SUPs) comprising at least 50% of plastic waste. This study investigates the physical and chemical degradation of frequently used SUPs, including petroleum-based and bio-based plastics, in natural Northern European coastal weather and marine environments over a three-year period from 2019 to 2022. Addressing a critical knowledge gap, this research was based on a hypothesis that real-world ageing studies on SUPs would produce more accurate time- and process-lines for their transformation from macro-to microplastics than are available today based on the modeling studies more frequently used. The study employs optical examination, mechanical testing, Fourier Transform Infrared (FTIR) spectroscopy, and Gas Chromatography-Mass Spectrometry (GC-MS) to determine and relate physical and chemical changes with time. The results indicate that SUPs undergo significantly faster degradation in natural weather than predicted to date. Photooxidation emerges as the primary degradation pathway for all SUPs, emphasizing the role of light in plastic breakdown. Importantly, physical degradation to microplastics in natural environments is not always associated with significant chemical changes such as breaking chemical bonds. Black SUPs exhibit greater resistance to visible light and ultraviolet radiation than equivalent white and transparent examples. In marine environments, SUPs degrade measurably slower than in air, their degradation slowing with increasing distance from the water surface. Our findings indicate the urgent need for strategies that mitigate the impacts of photo-oxidation of SUPs. Such strategies may include a focus on the removal of post-use SUPs from pavements, roads, beaches, and water surfaces where photo-oxidation is faster than underwater and underground. Preferential use of black SUPs over white or transparent should also be considered.
Collapse
Affiliation(s)
- Yvonne Shashoua
- Environmental Archaeology and Materials Science, National Museum of Denmark, IC Modewegsvej-Brede, Kongens Lyngby, 2800, Denmark
| | - Asal Peydaei
- Environmental Archaeology and Materials Science, National Museum of Denmark, IC Modewegsvej-Brede, Kongens Lyngby, 2800, Denmark.
| | - Martin N Mortensen
- Environmental Archaeology and Materials Science, National Museum of Denmark, IC Modewegsvej-Brede, Kongens Lyngby, 2800, Denmark
| | - Anders B Kanstrup
- Environmental Archaeology and Materials Science, National Museum of Denmark, IC Modewegsvej-Brede, Kongens Lyngby, 2800, Denmark
| | - David J Gregory
- Environmental Archaeology and Materials Science, National Museum of Denmark, IC Modewegsvej-Brede, Kongens Lyngby, 2800, Denmark
| |
Collapse
|
8
|
Velasquez JA, Bao Y, Huang JY. Atmospheric cold plasma as a novel approach to remediating microplastics pollution in water. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 356:124390. [PMID: 38897278 DOI: 10.1016/j.envpol.2024.124390] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2023] [Revised: 06/13/2024] [Accepted: 06/17/2024] [Indexed: 06/21/2024]
Abstract
Microplastics (MPs) have become an environmental and health threat to aquatic species and humans because they are small and can easily reach water bodies for municipal and agricultural uses. MPs have been traced in food commodities and products derived from animals and even found in bottles of drinking water. Current treatment techniques for permanently destroying MPs require high energy inputs and thus are generally cost-inefficient. Atmospheric cold plasma (ACP) is a low-cost energy-efficient technology to produce highly reactive species that can induce physicochemical changes in plastic polymers. This study, for the first time, used ACP as a novel method for MPs treatment. Polypropylene (PP) and low-density polyethylene (LDPE) were used to prepare model MPs. The effects of plasma working gas (oxygen, nitrogen, or their mixture) and post-ACP treatment storage (24 h) on MPs were studied. ACP treatments for 30 min successfully degraded both MPs, by 1.4-11.3% in weight. PP MPs had larger weight reduction than LDPE and the ACP of mixture gas was most effective. PP MPs also showed increased carbonyl index after treatments, to up to 6.89, indicating hydrolytic degradation. For LDPE MPs, oxygen ACP caused more oxidation, but storage did not have an enhancing effect. The results of physicochemical analyses indicated that MPs degradation by ACP was possibly mainly through oxidative and hydrolytic reactions, but further characterizations are needed. This study proves that ACP is a promising strategy to remediate MPs pollution, and thus has great potential for addressing the severe challenges of MPs that the food and agriculture sectors are currently facing.
Collapse
Affiliation(s)
| | - Yiwen Bao
- Department of Food Science, Purdue University, West Lafayette, IN, 47907, USA
| | - Jen-Yi Huang
- Department of Food Science, Purdue University, West Lafayette, IN, 47907, USA; Department of Agricultural and Biological Engineering, Purdue University, West Lafayette, IN, 47907, USA; Environmental and Ecological Engineering, Purdue University, West Lafayette, IN, 47907, USA.
| |
Collapse
|
9
|
Parida M, Jena T, Mohanty S, Nayak SK. Advancing sustainable agriculture: Evaluation of Poly (lactic acid) (PLA) based mulch films and identification of biodegrading microorganisms among soil microbiota. Int J Biol Macromol 2024; 269:132085. [PMID: 38723836 DOI: 10.1016/j.ijbiomac.2024.132085] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/06/2023] [Revised: 04/22/2024] [Accepted: 05/02/2024] [Indexed: 05/30/2024]
Abstract
Non-biodegradable polyolefin based plastic mulch residues in agricultural fields after the end of a crop cycle have raised several concerns as an environmental pollutant in recent years. This study explores the potential of Poly (lactic acid) (PLA) and Poly (butylene adipate-co-terephthalate) (PBAT) based compostable films reactively blended with compatibilizers and chain extenders as a promising solution to environmental challenges associated with traditional plastic mulch films. Epoxidized soybean oil (ESO) and Epoxy-functionalized styrene acrylic copolymer (ESA) have been used as reactive compatibilizers and chain extenders respectively. In-depth analysis of the mechanical, thermal, and barrier properties of the developed films, revealed that the PLA/PBAT blend films at 75:25 weight ratio in the presence of 5 phr ESO and 0.5 phr ESA exhibit improved performance characteristics for application as mulch films. Furthermore, the films were subjected to 360-h UV exposure to gauge their stability under prolonged exposure, specifically investigating changes in the carbonyl index. Additionally, a rigorous real-time field trial of the mulch films spanning eight months with various crops was carried out to understand their performance in practical agricultural settings. The study also involved the identification of microorganisms responsible for the degradation of the developed mulch films employing 16S rRNA sequencing.
Collapse
Affiliation(s)
- Manmath Parida
- Central Institute of Petrochemicals Engineering and Technology (CIPET): SARP - LARPM, B-25, CNI Complex, Patia, Bhubaneswar, Odisha 751024, India
| | - Tapaswini Jena
- Central Institute of Petrochemicals Engineering and Technology (CIPET): SARP - LARPM, B-25, CNI Complex, Patia, Bhubaneswar, Odisha 751024, India
| | - Smita Mohanty
- Central Institute of Petrochemicals Engineering and Technology (CIPET): SARP - LARPM, B-25, CNI Complex, Patia, Bhubaneswar, Odisha 751024, India.
| | | |
Collapse
|
10
|
Yang Z, Zhang J, Haruka N, Murat C, Arakawa H. Spectral analysis of environmental microplastic polyethylene (PE) using average spectra. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 927:171871. [PMID: 38531446 DOI: 10.1016/j.scitotenv.2024.171871] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/07/2023] [Revised: 03/19/2024] [Accepted: 03/20/2024] [Indexed: 03/28/2024]
Abstract
In this study, microplastic samples from surface seawater of Tokyo Bay were collected, polyethylene (PE) microplastics were used to calculate carbonyl index (CI), and average spectra of PE were analyzed and compared with a previous study applying agitation during chemical treatment. It was found that PE and polypropylene (PP) were the predominant polymer type in the samples. Among PE samples, fragments were the most commonly observed shape, with white being the dominant color. Deviations were found in the average spectra among different shapes and colors when compared to the standard PE spectrum. A comparison of the average spectra between the two datasets suggests that pronounced peaks related to oxidation are most likely resulted from agitation during the chemical treatment. Additionally, it was found a closer spectral resemblance between the sample spectra and the spectrum of standard sample of oxidized PE (PEOx) than with the standard PE spectrum, suggesting that using the oxidized PE as a reference spectrum might be more effective for identification. These findings highlight the complex factors affecting the spectral properties of microplastics and highlight the importance of understanding these variations to enhance the accuracy of microplastic identification workflows and understanding of environmental fate of microplastics.
Collapse
Affiliation(s)
- Zijiang Yang
- Faculty of Marine Resources and Environment, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan.
| | - Jiaqi Zhang
- Faculty of Marine Resources and Environment, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan.
| | - Nakano Haruka
- Research Institute for Applied Mechanics, Kyushu University, 6-1 Kasuga-Koen, Kasuga, Fukuoka 816-8580, Japan.
| | - Celik Murat
- Faculty of Marine Resources and Environment, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan
| | - Hisayuki Arakawa
- Faculty of Marine Resources and Environment, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan.
| |
Collapse
|
11
|
Dong S, Maciejewska BM, Schofield RM, Hawkins N, Siviour CR, Grobert N. Electrospinning Nonspinnable Sols to Ceramic Fibers and Springs. ACS NANO 2024; 18:13538-13550. [PMID: 38717374 PMCID: PMC11140837 DOI: 10.1021/acsnano.3c12659] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/15/2023] [Revised: 04/11/2024] [Accepted: 04/24/2024] [Indexed: 05/29/2024]
Abstract
Electrospinning has been applied to produce ceramic fibers using sol gel-based spinning solutions consisting of ceramic precursors, a solvent, and a polymer to control the viscosity of the solution. However, the addition of polymers to the spinning solution makes the process more complex, increases the processing time, and results in porous mechanically weak ceramic fibers. Herein, we develop a coelectrospinning technique, where a nonspinnable sol (<10 mPa s) consisting of only the ceramic precursor(s) and solvent(s) is encapsulated inside a polymeric shell, forming core-shell precursor fibers that are further calcined into ceramic fibers with reduced porosity, decreased surface defects, uniform crystal packing, and controlled diameters. We demonstrate the versatility of this method by applying it to a series of nonspinnable sols and creating high-quality ceramic fibers containing TiO2, ZrO2, SiO2, and Al2O3. The polycrystalline TiO2 fibers possess excellent flexibility and a high Young's modulus reaching 54.3 MPa, solving the extreme brittleness problem of the previously reported TiO2 fibers. The single-component ZrO2 fibers exhibit a Young's modulus and toughness of 130.5 MPa and 11.9 KJ/m3, respectively, significantly superior to the counterparts prepared by conventional sol-gel electrospinning. We also report the creation of ceramic fibers in micro- and nanospring morphologies and examine the formation mechanisms using thermomechanical simulations. The fiber assemblies constructed by the helical fibers exhibit a density-normalized toughness of 3.5-5 times that of the straight fibers due to improved fracture strain. This work expands the selection of the electrospinning solution and enables the development of ceramic fibers with more attractive properties.
Collapse
Affiliation(s)
- Shiling Dong
- Department
of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, U.K.
| | | | - Ryan M. Schofield
- Department
of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, U.K.
| | - Nicholas Hawkins
- Department
of Engineering, University of Oxford, Parks Road, Oxford OX1 3PJ, U.K.
| | - Clive R. Siviour
- Department
of Engineering, University of Oxford, Parks Road, Oxford OX1 3PJ, U.K.
| | - Nicole Grobert
- Department
of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, U.K.
| |
Collapse
|
12
|
Grafia AL, Barbosa SE. Polyethylene Film Surface Modification via Benzoic Acid Grafting. Polymers (Basel) 2024; 16:1291. [PMID: 38732764 PMCID: PMC11085461 DOI: 10.3390/polym16091291] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2024] [Revised: 04/15/2024] [Accepted: 04/23/2024] [Indexed: 05/13/2024] Open
Abstract
A polyethylene (PE) film surface modification method is proposed via benzoic acid (BA) alkylation grafting to improve the surface affinity to polar substances. The procedure involves sequentially spraying AlCl3 and BA onto the heat-softened PE surface. The occurrence of the alkylation reaction was evaluated through comparative chemical, morphological, and thermal analyses. It was demonstrated that the grafting reaction of BA onto the PE film surface took place, limited to the surface layer, while preserving the bulk properties of PE. The reaction resulted in the formation of aluminum benzoate complexes, which improved the surface affinity to polar compounds. The impact of grafting on the surface properties of PE was further assessed by comparing the behavior of PE films treated with BA and untreated PE films when painted with watercolors. The PE film grafted with BA exhibited increased affinity towards watercolors, providing strong evidence of a change in surface polarity from hydrophobic to hydrophilic. These findings indicate that the proposed methodology effectively renders the PE surface paintable, even with non-toxic water-based inks, making it suitable for applications such as packaging.
Collapse
Affiliation(s)
- Ana Luisa Grafia
- Planta Piloto de Ingeniería Química, PLAPIQUI (UNS-CONICET), Bahía Blanca 8000, Argentina;
- Departamento de Ingeniería Química, Universidad Nacional del Sur (UNS), Bahía Blanca 8000, Argentina
| | - Silvia Elena Barbosa
- Planta Piloto de Ingeniería Química, PLAPIQUI (UNS-CONICET), Bahía Blanca 8000, Argentina;
- Departamento de Ingeniería Química, Universidad Nacional del Sur (UNS), Bahía Blanca 8000, Argentina
| |
Collapse
|
13
|
S Gomes R, Fernandes AN, Waldman WR. How to Measure Polymer Degradation? An Analysis of Authors' Choices When Calculating the Carbonyl Index. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2024; 58:7609-7616. [PMID: 38624261 DOI: 10.1021/acs.est.3c10855] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/17/2024]
Abstract
The carbonyl index aims to measure the degradation level and is used in plastic degradation research as a proxy for the general degradation level of collected plastic pieces. According to the choices for carbonyl index calculation, comparison using this index is prevented and must be unveiled by the authors, which does not always happen. In order to study the proper usage of the carbonyl index, regarding the choice of the reference band and the usage of the band intensity or the absorption area, we systematically reviewed the methodologies used for polypropylene as a case study. Based on 95 studies gathered from 2000 to 2024, two main methods were used to determine the carbonyl index: the ratio between the carbonyl band area and the reference band area (33.68%) and the ratio between the highest intensity of the carbonyl band and the reference band (66.31%). The reference band of choice and the type of calculation method produce different carbonyl index values for the same spectra and mean different information, preventing comparison among works with different calculations.
Collapse
Affiliation(s)
- Raimara S Gomes
- Instituto de Química, Universidade Federal do Rio Grande do Sul (UFRGS), Av. Bento Gonçalves, 9500, Porto Alegre, RS 91501-970, Brasil
| | - Andreia N Fernandes
- Instituto de Química, Universidade Federal do Rio Grande do Sul (UFRGS), Av. Bento Gonçalves, 9500, Porto Alegre, RS 91501-970, Brasil
| | - Walter R Waldman
- Centro de Ciências e Tecnologia para Sustentabilidade, Universidade Federal de São Carlos (UFSCar), Rodovia SP-264, km 110, Sorocaba, SP 18052-780, Brasil
| |
Collapse
|
14
|
Müller ND, Kirtane A, Schefer RB, Mitrano DM. eDNA Adsorption onto Microplastics: Impacts of Water Chemistry and Polymer Physiochemical Properties. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2024; 58:7588-7599. [PMID: 38624040 DOI: 10.1021/acs.est.3c10825] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/17/2024]
Abstract
Adsorption of biomacromolecules onto polymer surfaces, including microplastics (MPs), occurs in multiple environmental compartments, forming an ecocorona. Environmental DNA (eDNA), genetic material shed from organisms, can adsorb onto MPs which can potentially either (1) promote long-range transport of antibiotic resistant genes or (2) serve to gain insights into the transport pathways and origins of MPs by analyzing DNA sequences on MPs. However, little is known about the capacity of MPs to adsorb eDNA or the factors that influence sorption, such as polymer and water chemistries. Here we investigated the adsorption of extracellular linear DNA onto a variety of model MP fragments composed of three of the most environmentally prevalent polymers (polyethylene, polyethylene terephthalate, and polystyrene) in their pristine and photochemically weathered states. Batch adsorption experiments in a variety of water chemistries were complemented with nonlinear modeling to quantify the rate and extent of eDNA sorption. Ionic strength was shown to strongly impact DNA adsorption by reducing or inhibiting electrostatic repulsion. Polyethylene terephthalate exhibited the highest adsorption capacity when normalizing for MP specific surface area, likely due to the presence of ester groups. Kinetics experiments showed fast adsorption (majority adsorbed under 30 min) before eventually reaching equilibrium after 1-2 h. Overall, we demonstrated that DNA quickly binds to MPs, with pseudo-first- and -second-order models describing adsorption kinetics and the Freundlich model describing adsorption isotherms most accurately. These insights into DNA sorption onto MPs show that there is potential for MPs to act as vectors for genetic material of interest, especially considering that particle-bound DNA typically persists longer in the environment than dissolved DNA.
Collapse
Affiliation(s)
- Nicolas D Müller
- Department of Environmental Systems Science, ETH Zurich, Universitätstrasse 16, 8092 Zurich, Switzerland
| | - Anish Kirtane
- Department of Environmental Systems Science, ETH Zurich, Universitätstrasse 16, 8092 Zurich, Switzerland
| | - Roman B Schefer
- Department of Environmental Systems Science, ETH Zurich, Universitätstrasse 16, 8092 Zurich, Switzerland
| | - Denise M Mitrano
- Department of Environmental Systems Science, ETH Zurich, Universitätstrasse 16, 8092 Zurich, Switzerland
| |
Collapse
|
15
|
Sangeetha S, Krishna PH. Inclusion of Pseudomonas fluorescens into soil-like fraction from municipal solid waste management park to enhance plastic biodegradation. Biodegradation 2024:10.1007/s10532-024-10085-2. [PMID: 38687420 DOI: 10.1007/s10532-024-10085-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/21/2023] [Accepted: 04/13/2024] [Indexed: 05/02/2024]
Abstract
Single-use facial masks which are predominantly made out of polypropylene is being used and littered in large quantities during post COVID-19 situation. Extensive researches on bioremediation of plastic pollution on soil led to the identification of numerous plastic degrading microorganisms. These organisms assimilate plastic polymers as their carbon source for synthesizing energy. Pseudomonas fluorescens (PF) is one among such microorganism which is being identified to biodegrade plastic polymers in controlled environment. The natural biodegradation of facial mask in soil-like fraction collected from municipal waste management site, bioaugmentation of the degradation process with Pseudomonas fluorescens, biostimulation of the soil with carbonless nutritional supplements and combined bioaugmentation with biostimulation process were studied in the present work. The study has been conducted both in controlled and in natural condition for a period of 12 months. The efficiency of the degradation was verified through FTIR analyses using carbonyl index, bond energy change, Loss in ignition (LOI) measurement along with CHNS analyses of residual substances. The analysis of results reported that carbonyl index (in terms of transmittance) was reduced to 46% of the control batch through the inclusion of PF in natural condition. The bioaugmented batch maintained in natural condition showed 33% reduction of LOI with respect to the control batch. The unburnt carbon content of the residual matter obtained from the furnace were analysed using CHNS analyser and indicated the lowest carbon content in the same bioaugmented batch. In this study, an attempt is made to verify the feasibility of enhancing biodegradation of single-use facial mask by bioaugmentation of soil-like fraction available in solid waste management park with Pseudomonas fluorescens under natural condition. CHNS and FTIR analysis assures the biodegradation of plastic waste in the soil-like fraction using Pseudomonas fluorescens under both controlled and natural environmental condition.
Collapse
Affiliation(s)
- S Sangeetha
- National Institute of Technology, Warangal, Telangana, 506 004, India.
| | - P Hari Krishna
- National Institute of Technology, Warangal, Telangana, 506 004, India
| |
Collapse
|
16
|
Groß M, Mail M, Wrigley O, Debastiani R, Scherer T, Amelung W, Braun M. Plastic Fruit Stickers in Industrial Composting─Surface and Structural Alterations Revealed by Electron Microscopy and Computed Tomography. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2024; 58:7124-7132. [PMID: 38599582 PMCID: PMC11044595 DOI: 10.1021/acs.est.3c08734] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2023] [Revised: 02/15/2024] [Accepted: 02/26/2024] [Indexed: 04/12/2024]
Abstract
Often large quantities of plastics are found in compost, with price look-up stickers being a major but little-explored component in the contamination path. Stickers glued to fruit or vegetable peels usually remain attached to the organic material despite sorting processes in the composting plant. Here, we investigated the effects of industrial composting on the structural alterations of these stickers. Commercial polypropylene (PP) stickers on banana peels were added to a typical organic material mixture for processing in an industrial composting plant and successfully resampled after a prerotting (11 days) and main rotting step (25 days). Afterward, both composted and original stickers were analyzed for surface and structural changes via scanning electron microscopy, Fourier-transform infrared spectroscopy, and micro- and nano-X-ray computed tomography (CT) combined with deep learning approaches. The composting resulted in substantial surface changes and degradation in the form of microbial colonization, deformation, and occurrence of cracks in all stickers. Their pore volumes increased from 16.7% in the original sticker to 26.3% at the end of the compost process. In a similar way, the carbonyl index of the stickers increased. Micro-CT images additionally revealed structural changes in the form of large adhesions that penetrated the surface of the sticker. These changes were accompanied by delamination after 25 days of composting, thus overall hinting at the degradation of the stickers and the subsequent formation of smaller microplastic pieces.
Collapse
Affiliation(s)
- Max Groß
- Institute
of Crop Science and Resource Conservation (INRES), Soil Science and
Soil Ecology, University of Bonn, Nussallee 13, 53115 Bonn, Germany
| | - Matthias Mail
- Institute
of Nanotechnology (INT), Karlsruhe Institute
of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany
- Karlsruhe
Nano Micro Facility (KNMFi), Karlsruhe Institute
of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
| | - Olivia Wrigley
- Institute
of Crop Science and Resource Conservation (INRES), Soil Science and
Soil Ecology, University of Bonn, Nussallee 13, 53115 Bonn, Germany
| | - Rafaela Debastiani
- Institute
of Nanotechnology (INT), Karlsruhe Institute
of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany
- Karlsruhe
Nano Micro Facility (KNMFi), Karlsruhe Institute
of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
| | - Torsten Scherer
- Institute
of Nanotechnology (INT), Karlsruhe Institute
of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany
- Karlsruhe
Nano Micro Facility (KNMFi), Karlsruhe Institute
of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
| | - Wulf Amelung
- Institute
of Crop Science and Resource Conservation (INRES), Soil Science and
Soil Ecology, University of Bonn, Nussallee 13, 53115 Bonn, Germany
| | - Melanie Braun
- Institute
of Crop Science and Resource Conservation (INRES), Soil Science and
Soil Ecology, University of Bonn, Nussallee 13, 53115 Bonn, Germany
| |
Collapse
|
17
|
Plota-Pietrzak A, Czechowski L, Miszczak S, Masek A. Innovative Materials Based on Epoxy Resin for Use as Seat Elements in Bulk Transport. MATERIALS (BASEL, SWITZERLAND) 2024; 17:1829. [PMID: 38673186 PMCID: PMC11051280 DOI: 10.3390/ma17081829] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2024] [Revised: 04/10/2024] [Accepted: 04/12/2024] [Indexed: 04/28/2024]
Abstract
The subject of this research is the development of epoxy composites with a defined service life for the purpose of seat elements in rail vehicles, which will be more environmentally friendly. The produced materials based on epoxy resin filled with PLA or PLA and quercetin were subjected to solar aging tests for 800 h to investigate the impact of the additives used on the aging behavior of the epoxy matrix. Firstly, the TGA analysis showed that the use of the proposed additives allowed for the maintenance of the thermal stability of the epoxy resin. Moreover, based on an optical microscopy test, it was noticed that the introduction of PLA and PLA with quercetin did not contribute to an increase in matrix defects. The one-directional tensile tests carried out before and after solar aging showed that the presence of polylactide in epoxy composites causes a slight growth of the stiffness and strength. Based on contact angle and color change measurements, it was found that quercetin was oxidized, thus ensuring protection for the epoxy matrix. This phenomenon was confirmed by FTIR study, where the carbonyl index (CI) value for the R-PLA-Q composite was lower than for the reference sample. The obtained composite structures may be a good alternative to traditionally used systems as seat elements in rail vehicles, which are not only characterized by high aging resistance but are also more eco-friendly.
Collapse
Affiliation(s)
- Angelika Plota-Pietrzak
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, 90-537 Lodz, Poland;
| | - Leszek Czechowski
- Department of Strength of Materials, Lodz University of Technology, 90-537 Lodz, Poland;
| | - Sebastian Miszczak
- Institute of Materials Science and Engineering, Lodz University of Technology, 90-537 Lodz, Poland;
| | - Anna Masek
- Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, 90-537 Lodz, Poland;
| |
Collapse
|
18
|
Surana M, Pattanayak DS, Yadav V, Singh VK, Pal D. An insight decipher on photocatalytic degradation of microplastics: Mechanism, limitations, and future outlook. ENVIRONMENTAL RESEARCH 2024; 247:118268. [PMID: 38244970 DOI: 10.1016/j.envres.2024.118268] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/27/2023] [Revised: 01/15/2024] [Accepted: 01/18/2024] [Indexed: 01/22/2024]
Abstract
Plastic material manufacturing and buildup over the past 50 years has significantly increased pollution levels. Microplastics (MPs) and non-biodegradable residual plastic films have become the two most pressing environmental issues among the numerous types of plastic pollution. These tiny plastic flakes enter water systems from a variety of sources, contaminating the water. Since MPs can be consumed by people and aquatic species and eventually make their way into the food chain, their presence in the environment poses a serious concern. Traditional technologies can remove MPs to some extent, but their functional groups, stable covalent bonds, and hydrophobic nature make them difficult to eliminate completely. The urgent need to develop a sustainable solution to the worldwide contamination caused by MPs has led to the exploration of various techniques. Advanced oxidation processes (AOPs) such as photo-catalytic oxidation, photo-degradation, and electrochemical oxidation have been investigated. Among these, photocatalysis stands out as the most promising method for degrading MPs. Photocatalysis is an environmentally friendly process that utilizes light energy to facilitate a chemical reaction, breaking down MPs into carbon dioxide and water-soluble hydrocarbons under aqueous conditions. In photocatalysis, semiconductors act as photocatalysts by absorbing energy from a light source, becoming excited, and generating reactive oxygen species (ROS). These ROS, including hydroxyl radicals (•OH) and superoxide ions ( [Formula: see text] ), play a crucial role in the degradation of MPs. This extensive review provides a detailed exploration of the mechanisms and processes underlying the photocatalytic removal of MPs, emphasizing its potential as an efficient and environmentally friendly approach to address the issue of plastic pollution.
Collapse
Affiliation(s)
- Madhu Surana
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - Dhruti Sundar Pattanayak
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - Venkteshwar Yadav
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - V K Singh
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - Dharm Pal
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India.
| |
Collapse
|
19
|
Key S, Ryan PG, Gabbott SE, Allen J, Abbott AP. Influence of colourants on environmental degradation of plastic litter. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 347:123701. [PMID: 38432345 DOI: 10.1016/j.envpol.2024.123701] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/04/2024] [Revised: 02/20/2024] [Accepted: 03/01/2024] [Indexed: 03/05/2024]
Abstract
Plastic degradation and the resultant production of microplastics has an important effect on the environment and fauna across the world. This paper shows that the colourant incorporated into plastic formulations has a significant effect on the stability of plastics. A static experimental exposure of differently coloured polypropylene bottle tops from the same manufacturer to a moderate climate over 3 years showed that black, white and silver plastics were almost unaffected whereas the specific blue, green and especially red pigments used in this study were significantly degraded. The second part of the study collected littered HDPE plastic containers from a remote South African beach and analysed their condition as a function of the given manufacturing date stamp. Most items were black or white and samples up to 45 years old were found with relatively little environmental degradation other than mild abrasion. It appears that carbon and titanium dioxide colourants protect the HDPE polymer from photolytic degradation. While anthraquinone, phthalocyanine and diketopyrrolopyrrole pigments were found to enable UV light to degrade the polymer leading to brittle plastics, promoting the formation of microplastics, it is likely that other pigments that do not strongly absorb in the UV will result in similar degradation.
Collapse
Affiliation(s)
- Sarah Key
- School of Chemistry, University of Leicester, Leicester, LE1 7RH, UK
| | - Peter G Ryan
- FitzPatrick Institute of African Ornithology, University of Cape Town, Rondebosch 7701, South Africa
| | - Sarah E Gabbott
- School of Geography, Geology and the Environment, University of Leicester, Leicester, LE1 7RH, UK
| | - Jack Allen
- School of Chemistry, University of Leicester, Leicester, LE1 7RH, UK
| | - Andrew P Abbott
- School of Chemistry, University of Leicester, Leicester, LE1 7RH, UK.
| |
Collapse
|
20
|
Tyubaeva PM, Varyan IA, Gasparyan KG, Romanov RR, Yurina LV, Vasilyeva AD, Popov AA, Arzhakova OV. Life Cycle of Functional All-Green Biocompatible Fibrous Materials Based on Biodegradable Polyhydroxybutyrate and Hemin: Synthesis, Service Life, and the End-of-Life via Biodegradation. ACS APPLIED BIO MATERIALS 2024; 7:2325-2337. [PMID: 38483087 DOI: 10.1021/acsabm.4c00010] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/16/2024]
Abstract
This article addresses the entire life cycle of the all-green fibrous materials based on poly(3-hydroxybutyrate) (PHB) containing a natural biocompatible additive Hemin (Hmi): from preparation, service life, and the end of life upon in-soil biodegradation. Fibrous PHB/Hmi materials with a highly developed surface and interconnected porosity were prepared by electrospinning (ES) from Hmi-containing feed solutions. Structural organization of the PHB/Hmi materials (porosity, uniform structure, diameter of fibers, surface area, distribution of Hmi within the PHB matrix, phase composition, etc.) is shown to be governed by the ES conditions: the presence of even minor amounts of Hmi in the PHB/Hmi (below 5 wt %) serves as a powerful tool for the control over their structure, performance, and biodegradation. Service characteristics of the PHB/Hmi materials (wettability, prolonged release of Hmi, antibacterial activity, breathability, and mechanical properties) were studied by different physicochemical methods (scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, differential scanning calorimetry, contact angle measurements, antibacterial tests, etc.). The effect of the structural organization of the PHB/Hmi materials on their in-soil biodegradation at the end of life was analyzed, and key factors providing efficient biodegradation of the PHB/Hmi materials at all stages (from adaptation to mineralization) are highlighted (high surface area and porosity, thin fibers, release of Hmi, etc.). The proposed approach allows for target-oriented preparation and structural design of the functional PHB/Hmi nonwovens when their structural supramolecular organization with a highly developed surface area controls both their service properties as efficient antibacterial materials and in-soil biodegradation upon the end of life.
Collapse
Affiliation(s)
- Polina M Tyubaeva
- Academic Department of Technology and Chemistry of Innovative Materials, Plekhanov University of Economics, Stremyanny per. 36, Moscow 117997 Russia
- Department of Biological and Chemical Physics of Polymers, Emanuel Institute of Biochemical Physics, Russian Academy of Sciences, Kosygina ul. 4, Moscow 119334, Russia
| | - Ivetta A Varyan
- Academic Department of Technology and Chemistry of Innovative Materials, Plekhanov University of Economics, Stremyanny per. 36, Moscow 117997 Russia
- Department of Biological and Chemical Physics of Polymers, Emanuel Institute of Biochemical Physics, Russian Academy of Sciences, Kosygina ul. 4, Moscow 119334, Russia
| | - Kristina G Gasparyan
- Department of Biological and Chemical Physics of Polymers, Emanuel Institute of Biochemical Physics, Russian Academy of Sciences, Kosygina ul. 4, Moscow 119334, Russia
| | - Roman R Romanov
- Academic Department of Technology and Chemistry of Innovative Materials, Plekhanov University of Economics, Stremyanny per. 36, Moscow 117997 Russia
| | - Lyubov V Yurina
- Department of Biological and Chemical Physics of Polymers, Emanuel Institute of Biochemical Physics, Russian Academy of Sciences, Kosygina ul. 4, Moscow 119334, Russia
| | - Alexandra D Vasilyeva
- Department of Biological and Chemical Physics of Polymers, Emanuel Institute of Biochemical Physics, Russian Academy of Sciences, Kosygina ul. 4, Moscow 119334, Russia
| | - Anatoly A Popov
- Academic Department of Technology and Chemistry of Innovative Materials, Plekhanov University of Economics, Stremyanny per. 36, Moscow 117997 Russia
- Department of Biological and Chemical Physics of Polymers, Emanuel Institute of Biochemical Physics, Russian Academy of Sciences, Kosygina ul. 4, Moscow 119334, Russia
| | - Olga V Arzhakova
- Faculty of Chemistry, Lomonosov Moscow State University, Leninskie Gory 1/3, 119991 Moscow, Russia
| |
Collapse
|
21
|
Jeyavani J, Al-Ghanim KA, Govindarajan M, Nicoletti M, Malafaia G, Vaseeharan B. Bacterial screening in Indian coastal regions for efficient polypropylene microplastics biodegradation. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 918:170499. [PMID: 38296101 DOI: 10.1016/j.scitotenv.2024.170499] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/18/2023] [Revised: 01/23/2024] [Accepted: 01/25/2024] [Indexed: 02/13/2024]
Abstract
Polypropylene based medical devices significantly increased production and usage in COVID-19 pandemic states, and this material is very resilient in the environment. Thus, more than ever, rapid action is needed to reduce this pollution. This study focuses on the degradation of polypropylene microplastics (PP MPs) by unique marine bacterial strains obtained from the Thoundi (Bacillus tropicus, Bacillus cereus, Stenotrophomonas acidaminiphila, and Brucella pseudintermedia) and Rameshwaram coasts (Bacillus cereus). Those above five bacterial strains were chosen after preliminary screening of their hydrophobicity, biofilm-forming capabilities, and responsiveness to the zone of clearance technique. During the biodegradation process (28 days), the growth, metabolic activity, and viability of these five isolates were all raised. After the post-biodegradation process, the weight loss percentages of the mentioned bacterial strains treated with PP MPs gradually decreased, with values of 51.5 ± 0.5 %, 47.5 ± 0.5 %, 33 ± 1 %, 28.5 ± 0.5 and 35.5 ± 0.5 %, respectively. UV-Vis DRS and SEM analysis confirmed that bacterial strains adhering to MPs cause cracks and cavities on their surface. The degradation of PP MPs can be inferred from alterations in the FT-IR spectrum, specifically in the carbonyl group range of 1100-1700 cm-1, as well as changes in the 1H NMR spectrum, including chemical shift and proton peak pattern alterations. Bacterial strains facilitated the degradation of PP MPs through the secretion of hydrolase-categorized enzymes of protease, lipase, and esterase. The findings of this study indicate that marine bacteria may possess distinctive characteristics that facilitate the degradation of plastic waste and contribute to environmental conservation.
Collapse
Affiliation(s)
- Jeyaraj Jeyavani
- Biomaterials and Biotechnology in Animal Health Lab, Department of Animal Health and Management, Alagappa University, Karaikudi 630003, Tamil Nadu, India.
| | - Khalid A Al-Ghanim
- Department of Zoology, College of Science, King Saud University, Riyadh 11451, Saudi Arabia.
| | - Marimuthu Govindarajan
- Unit of Mycology and Parasitology, Department of Zoology, Annamalai University, Annamalainagar 608 002, Tamil Nadu, India; Unit of Natural Products and Nanotechnology, Department of Zoology, Government College for Women (Autonomous), Kumbakonam 612 001, Tamil Nadu, India.
| | - Marcello Nicoletti
- Department of Environmental Biology, Sapienza University of Rome, 00185 Rome, Italy.
| | - Guilherme Malafaia
- Post-Graduation Program in Biotechnology and Biodiversity, Federal University of Goiás, Goiânia, GO, Brazil; Laboratory of Toxicology Applied to the Environment, Goiano Federal Institute, Urutaí Campus, Rodovia Geraldo Silva Nascimento, 2,5 km, Zona Rural, Urutaí, GO, Brazil; Post-Graduation Program in Ecology, Conservation, and Biodiversity, Federal University of Uberlândia, Uberlândia, MG, Brazil; Post-Graduation Program in Conservation of Cerrado Natural Resources, Goiano Federal Institute, Urutaí, GO, Brazil.
| | - Baskaralingam Vaseeharan
- Biomaterials and Biotechnology in Animal Health Lab, Department of Animal Health and Management, Alagappa University, Karaikudi 630003, Tamil Nadu, India.
| |
Collapse
|
22
|
Theobald B, Risani R, Donaldson L, Bridson JH, Kingsbury JM, Pantos O, Weaver L, Lear G, Pochon X, Zaiko A, Smith DA, Anderson R, Davy B, Davy S, Doake F, Masterton H, Audrezet F, Maday SDM, Wallbank JA, Barbier M, Greene AF, Parker K, Harris J, Northcott GL, Abbel R. An investigation into the stability and degradation of plastics in aquatic environments using a large-scale field-deployment study. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 917:170301. [PMID: 38272094 DOI: 10.1016/j.scitotenv.2024.170301] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/16/2023] [Revised: 12/18/2023] [Accepted: 01/18/2024] [Indexed: 01/27/2024]
Abstract
The fragmentation of plastic debris is a key pathway to the formation of microplastic pollution. These disintegration processes depend on the materials' physical and chemical characteristics, but insight into these interrelationships is still limited, especially under natural conditions. Five plastics of known polymer/additive compositions and processing histories were deployed in aquatic environments and recovered after six and twelve months. The polymer types used were linear low density polyethylene (LLDPE), oxo-degradable LLDPE (oxoLLDPE), poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and poly(lactic acid) (PLA). Four geographically distinct locations across Aotearoa/New Zealand were chosen: three marine sites and a wastewater treatment plant (WWTP). Accelerated UV-weathering under controlled laboratory conditions was also carried out to evaluate artificial ageing as a model for plastic degradation in the natural environment. The samples' physical characteristics and surface microstructures were studied for each deployment location and exposure time. The strongest effects were found for oxoLLDPE upon artificial ageing, with increased crystallinity, intense surface cracking, and substantial deterioration of its mechanical properties. However, no changes to the same extent were found after recovery of the deployed material. In the deployment environments, the chemical nature of the plastics was the most relevant factor determining their behaviours. Few significant differences between the four aquatic locations were identified, except for PA6, where indications for biological surface degradation were found only in seawater, not the WWTP. In some cases, artificial ageing reasonably mimicked the changes which some plastic properties underwent in aquatic environments, but generally, it was no reliable model for natural degradation processes. The findings from this study have implications for the understanding of the initial phases of plastic degradation in aquatic environments, eventually leading to microplastics formation. They can also guide the interpretation of accelerated laboratory ageing for the fate of aquatic plastic pollution, and for the testing of aged plastic samples.
Collapse
Affiliation(s)
| | | | | | - James H Bridson
- Scion, Rotorua 3010, New Zealand; University of Canterbury, Christchurch 8140, New Zealand
| | - Joanne M Kingsbury
- Institute of Environmental Science and Research, Christchurch 8041, New Zealand
| | - Olga Pantos
- Institute of Environmental Science and Research, Christchurch 8041, New Zealand
| | - Louise Weaver
- Institute of Environmental Science and Research, Christchurch 8041, New Zealand
| | - Gavin Lear
- University of Auckland, Auckland 1010, New Zealand
| | - Xavier Pochon
- University of Auckland, Auckland 1010, New Zealand; Cawthron Institute, Nelson 7010, New Zealand
| | | | | | | | - Ben Davy
- Scion, Rotorua 3010, New Zealand
| | | | - Fraser Doake
- Institute of Environmental Science and Research, Christchurch 8041, New Zealand
| | - Hayden Masterton
- Institute of Environmental Science and Research, Christchurch 8041, New Zealand
| | - François Audrezet
- University of Auckland, Auckland 1010, New Zealand; Cawthron Institute, Nelson 7010, New Zealand
| | | | | | | | | | | | | | | | | |
Collapse
|
23
|
Zhang T, Li X, Rao X, Peng Y, Zhao C, Xu Y, Li J, Wei J. Biodegradation of polystyrene and polyethylene by Microbacterium esteraromaticum SW3 isolated from soil. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2024; 274:116207. [PMID: 38492484 DOI: 10.1016/j.ecoenv.2024.116207] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/29/2023] [Revised: 02/26/2024] [Accepted: 03/09/2024] [Indexed: 03/18/2024]
Abstract
Plastic pollution is a common concern of global environmental pollution. Polystyrene (PS) and polyethylene (PE) account for almost one-third of global plastic production. However, so far, there have been few reports on microbial strains capable of simultaneously degrading PS and PE. In this study, Microbacterium esteraromaticum SW3, a non-pathogenic microorganism that can use PS or PE as the only carbon source in the mineral salt medium (MM), was isolated from plastics-contaminated soil and identified. The optimal growth conditions for SW3 in MM were 2% (w/v) PS or 2% (w/v) PE, 35°C and pH 6.3. A large number of bacteria and obvious damaged areas were observed on the surface of PS and PE products after inoculated with SW3 for 21 d. The degradation rates of PS and PE by SW3 (21d) were 13.17% and 5.39%, respectively. Manganese peroxidase and lipase were involved in PS and PE degradation by SW3. Through Fourier infrared spectroscopy detection, different functional groups such as carbonyl, hydroxyl and amidogen groups were produced during the degradation of PS and PE by SW3. Moreover, PS and PE were degraded into alkanes, ketones, carboxylic acids, esters and so on detected by GC-MS. Collectively, we have isolated and identified SW3, which can use PS or PE as the only carbon source in MM as well as degrade PS and PE products. This study not only provides a competitive candidate strain with broad biodegradability for the biodegradation of PS and/or PE pollution, but also provides new insights for the study of plastic biodegradation pathways.
Collapse
Affiliation(s)
- Tingting Zhang
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China
| | - Xinyi Li
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China
| | - Xing Rao
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China
| | - Yukun Peng
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China
| | - Changle Zhao
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China
| | - Yaobo Xu
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China
| | - Juan Li
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China
| | - Jing Wei
- Integrative Science Center of Germplasm Creation in Western China (CHONGQING) Science City, Key Laboratory of Freshwater Fish Reproduction and Development (Ministry of Education), Laboratory of Aquatic Science of Chongqing, School of Life Sciences, Southwest University, Chongqing, China.
| |
Collapse
|
24
|
Quilumbaquin W, Castillo-Cabrera GX, Borrero-González LJ, Mora JR, Valle V, Debut A, Loor-Urgilés LD, Espinoza-Montero PJ. Photoelectrocatalytic degradation of high-density polyethylene microplastics on TiO 2-modified boron-doped diamond photoanode. iScience 2024; 27:109192. [PMID: 38433924 PMCID: PMC10906510 DOI: 10.1016/j.isci.2024.109192] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2023] [Revised: 11/09/2023] [Accepted: 02/07/2024] [Indexed: 03/05/2024] Open
Abstract
Microplastic (MP) accumulation in the environment is accelerating rapidly, which has led to their effects on both the ecosystem and human life garnering much attention. This study is the first to examine the degradation of high-density polyethylene (HDPE) MPs via photoelectrocatalysis (PEC) using a TiO2-modified boron-doped diamond (BDD/TiO2) photoanode. This study was divided into three stages: (i) preparation of the photoanode through electrophoretic deposition of synthetic TiO2 nanoparticles on a BDD electrode; (ii) characterization of the modified photoanode using electrochemical, structural, and optical techniques; and (iii) degradation of HDPE MPs by electrochemical oxidation and photoelectrocatalysis on bare and modified BDD electrodes under dark and UV light conditions. The results indicate that the PEC technique degraded 89.91 ± 0.08% of HDPE MPs in a 10-h reaction and was more efficient at a lower current density (6.89 mA cm-1) with the BDD/TiO2 photoanode compared to electrochemical oxidation on bare BDD.
Collapse
Affiliation(s)
- Wendy Quilumbaquin
- Escuela de Ciencias Químicas, Pontificia Universidad Católica del Ecuador, Quito 170525, Ecuador
| | | | - Luis J. Borrero-González
- Laboratorio de Óptica Aplicada, Escuela de Ciencias Físicas y Matemática, Pontificia Universidad Católica del Ecuador, Quito 170525, Ecuador
| | - José R. Mora
- Department of Chemical Engineering, Universidad San Francisco de Quito USFQ, Quito 170157, Ecuador
| | - Vladimir Valle
- Departamento de Ciencias de Alimentos y Biotecnología, Escuela Politécnica Nacional, Quito 170517, Ecuador
| | - Alexis Debut
- Centro de Nanociencia y Nanotecnología, Universidad de las Fuerzas Armadas ESPE, Sangolquí 170501, Ecuador
| | - Luis D. Loor-Urgilés
- Escuela de Ciencias Químicas, Pontificia Universidad Católica del Ecuador, Quito 170525, Ecuador
| | | |
Collapse
|
25
|
Ghanadi M, Padhye LP. Revealing the long-term impact of photodegradation and fragmentation on HDPE in the marine environment: Origins of microplastics and dissolved organics. JOURNAL OF HAZARDOUS MATERIALS 2024; 465:133509. [PMID: 38232551 DOI: 10.1016/j.jhazmat.2024.133509] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2023] [Revised: 12/25/2023] [Accepted: 01/09/2024] [Indexed: 01/19/2024]
Abstract
The extensive usage of high-density polyethylene (HDPE) materials in marine environments raises concerns about their potential contribution to plastic pollution. Various factors contribute to the degradation of HDPE in marine environments, including UV radiation, seawater hydrolysis, biodegradation, and mechanical stress. Despite their supposed long lifespans, there is still a lack of understanding about the long-term degradation mechanisms that cause weathering of seawater-exposed HDPE products. In this research, the impact of UV radiation on the degradation of HDPE pile sleeves was studied in natural as well as laboratory settings to isolate the UV effect. After nine years of exposure to the marine environment in natural settings, the HDPE pile sleeves exhibited an increase in oxygen-containing surface functional groups and more morphological changes compared to accelerated UVB irradiation in the laboratory. This indicated that combined non-UV mechanisms may play a major role in HDPE degradation than UV irradiation alone. However, UVB irradiation was found to release dissolved organic carbon and total dissolved nitrogen from HDPE pile sleeves, reaching levels of up to 15 mg/L and 2 mg/L, respectively. Our findings underscore the significance of taking into account both UV and non-UV degradation mechanisms when evaluating the role of HDPE in contributing to marine plastic pollution.
Collapse
Affiliation(s)
- Mahyar Ghanadi
- Department of Civil and Environmental Engineering, The University of Auckland, Auckland 1010, New Zealand
| | - Lokesh P Padhye
- Department of Civil and Environmental Engineering, The University of Auckland, Auckland 1010, New Zealand.
| |
Collapse
|
26
|
Bihannic I, Gley R, Gallo L, Badura A, Razafitianamaharavo A, Beuret M, Billet D, Bojic C, Caillet C, Morlot P, Zaffino M, Jouni F, George B, Boulet P, Noûs C, Danger M, Felten V, Pagnout C, Duval JFL. Photodegradation of disposable polypropylene face masks: Physicochemical properties of debris and implications for the toxicity of mask-carried river biofilms. JOURNAL OF HAZARDOUS MATERIALS 2024; 465:133067. [PMID: 38039813 DOI: 10.1016/j.jhazmat.2023.133067] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Revised: 11/18/2023] [Accepted: 11/21/2023] [Indexed: 12/03/2023]
Abstract
COVID-19 outbreak led to a massive dissemination of protective polypropylene (PP) face masks in the environment, posing a new environmental risk amplified by mask photodegradation and fragmentation. Masks are made up of a several kilometres long-network of fibres with diameter from a few microns to around 20 µm. After photodegradation, these fibres disintegrate, producing water dispersible debris. Electrokinetics and particle stability observations support that photodegradation increases/decreases the charge/hydrophobicity of released colloidal fragments. This change in hydrophobicity is related to the production of UV-induced carbonyl and hydroxyl reactive groups detectable after a few days of exposure. Helical content, surface roughness and specific surface area of mask fibres are not significantly impacted by photodegradation. Fragmentation of fibres makes apparent, at the newly formed surfaces, otherwise-buried additives like TiO2 nanoparticles and various organic components. Mortality of gammarids is found to increase significantly over time when fed with 3 days-UV aged masks that carry biofilms grown in river, which is due to a decreased abundance of microphytes therein. In contrast, bacteria abundance and microbial community composition remain unchanged regardless of mask degradation. Overall, this work reports physicochemical properties of pristine and photodegraded masks, and ecosystemic functions and ecotoxicity of freshwater biofilms they can carry.
Collapse
Affiliation(s)
| | - Renaud Gley
- Université de Lorraine, CNRS, LIEC, F-54000 Nancy, France
| | - Lucas Gallo
- Université de Lorraine, CNRS, LIEC, F-54000 Nancy, France
| | | | | | | | - David Billet
- Université de Lorraine, CNRS, LIEC, F-54000 Nancy, France
| | - Clément Bojic
- Université de Lorraine, CNRS, LIEC, F-57000 Metz, France
| | - Céline Caillet
- Université de Lorraine, CNRS, LIEC, F-54000 Nancy, France
| | | | - Marie Zaffino
- Université de Lorraine, CNRS, LIEC, F-57000 Metz, France
| | - Fatina Jouni
- Université de Lorraine, CNRS, LIEC, F-57000 Metz, France
| | - Béatrice George
- Université de Lorraine, INRAE, LERMAB, F-54000 Nancy, France
| | - Pascal Boulet
- Université de Lorraine, CNRS, IJL, F-54000 Nancy, France
| | | | - Michael Danger
- Université de Lorraine, CNRS, LIEC, F-57000 Metz, France
| | - Vincent Felten
- Université de Lorraine, CNRS, LIEC, F-57000 Metz, France
| | | | | |
Collapse
|
27
|
Istomina A, Chelomin V, Mazur A, Zhukovskaya A, Karpenko A, Mazur M. Biodegradation of polyethylene in digestive gland homogenates of marine invertebrates. PeerJ 2024; 12:e17041. [PMID: 38426135 PMCID: PMC10903337 DOI: 10.7717/peerj.17041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/20/2023] [Accepted: 02/12/2024] [Indexed: 03/02/2024] Open
Abstract
Вiotic factors may be the driving force of plastic fragmentation along with abiotic factors. Since understanding the processes of biodegradation and biological depolymerization of plastic is important, a new methodological approach was proposed in this study to investigate the role of marine invertebrate digestive enzymes in plastic biodegradation. The aim of this study is to evaluate the possibility of enzymatic biodegradation of polyethylene fragments in the digestive gland homogenate of marine invertebrates differing in their feeding type (Strongylocentrotus nudus, Patiria pectinifera, Mizuhopecten yessoensis). Significant changes are found in the functional groups of the polymer after 3 days of incubation in the digestive gland homogenates of the studied marine invertebrates. A significant increase in the calculated CI (carbonyl index) and COI (сarbon-oxygen index) indices compared to the control sample was observed. The results suggest that digestive enzymes of studied organisms may play an important role in the biogeochemical cycling of plastic.
Collapse
Affiliation(s)
- Aleksandra Istomina
- V.I. Il’ichev Pacific Oceanological Institute, Far Eastern Branch, Russian Academy of Sciences, Vladivostok, Russia
| | - Victor Chelomin
- V.I. Il’ichev Pacific Oceanological Institute, Far Eastern Branch, Russian Academy of Sciences, Vladivostok, Russia
| | - Andrey Mazur
- V.I. Il’ichev Pacific Oceanological Institute, Far Eastern Branch, Russian Academy of Sciences, Vladivostok, Russia
| | - Avianna Zhukovskaya
- V.I. Il’ichev Pacific Oceanological Institute, Far Eastern Branch, Russian Academy of Sciences, Vladivostok, Russia
| | - Alexander Karpenko
- A.V. Zhirmunsky National Scientific Center of Marine Biology, Far Eastern Branch, Russian Academy of Sciences, Vladivostok, Russia
| | - Marina Mazur
- A.V. Zhirmunsky National Scientific Center of Marine Biology, Far Eastern Branch, Russian Academy of Sciences, Vladivostok, Russia
| |
Collapse
|
28
|
Moura DS, Pestana CJ, Moffat CF, Gkoulemani N, Hui J, Irvine JTS, Lawton LA. Aging microplastics enhances the adsorption of pharmaceuticals in freshwater. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 912:169467. [PMID: 38141976 DOI: 10.1016/j.scitotenv.2023.169467] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 12/07/2023] [Accepted: 12/16/2023] [Indexed: 12/25/2023]
Abstract
Plastic pollution is an increasing environmental concern. Pollutants such as microplastics (< 5 mm) and pharmaceuticals often co-exist in the aquatic environment. The current study aimed to elucidate the interaction of pharmaceuticals with microplastics and ascertain how the process of photo-oxidation of microplastics affected the adsorption of the pharmaceuticals. To this end, a mixture containing ibuprofen, carbamazepine, fluoxetine, venlafaxine and ofloxacin (16 μmol L-1 each) was placed in contact with one of six either virgin or aged microplastic types. The virgin microplastics were acquired commercially and artificially aged in the laboratory. Polypropylene, polyethylene, polyethylene terephthalate, polyamide, polystyrene, and polyvinyl chloride microparticles at two sizes described as small (D50 < 35 μm) and large (D50 95-157 μm) were evaluated. Results demonstrated that the study of virgin particles may underestimate the adsorption of micropollutants onto microplastics. For virgin particles, only small microparticles of polypropylene, polyethylene, polyvinyl chloride, and both sizes of polyamide adsorbed pharmaceuticals. Aging the microplastics increased significantly the adsorption of pharmaceuticals by microplastics. Fluoxetine adsorbed onto all aged microplastics, from 18 % (large polyethylene terephthalate) to 99 % (small polypropylene). The current investigation highlights the potential of microplastics to act as a vector for pharmaceuticals in freshwater, especially after aging.
Collapse
Affiliation(s)
- Diana S Moura
- School of Pharmacy and Life Sciences, Robert Gordon University, Aberdeen AB10 7GJ, UK.
| | - Carlos J Pestana
- School of Pharmacy and Life Sciences, Robert Gordon University, Aberdeen AB10 7GJ, UK
| | - Colin F Moffat
- School of Pharmacy and Life Sciences, Robert Gordon University, Aberdeen AB10 7GJ, UK
| | - Nikoletta Gkoulemani
- School of Chemistry, University of St Andrews, North Haugh, St Andrews, Scotland KY16 9ST, UK
| | - Jianing Hui
- School of Chemistry, University of St Andrews, North Haugh, St Andrews, Scotland KY16 9ST, UK
| | - John T S Irvine
- School of Chemistry, University of St Andrews, North Haugh, St Andrews, Scotland KY16 9ST, UK
| | - Linda A Lawton
- School of Pharmacy and Life Sciences, Robert Gordon University, Aberdeen AB10 7GJ, UK
| |
Collapse
|
29
|
Niu Z, Curto M, Le Gall M, Demeyer E, Asselman J, Janssen CR, Dhakal HN, Davies P, Catarino AI, Everaert G. Accelerated fragmentation of two thermoplastics (polylactic acid and polypropylene) into microplastics after UV radiation and seawater immersion. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2024; 271:115981. [PMID: 38242046 DOI: 10.1016/j.ecoenv.2024.115981] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/22/2023] [Revised: 12/19/2023] [Accepted: 01/12/2024] [Indexed: 01/21/2024]
Abstract
To better understand the fate and assess the ingestible fraction of microplastics (by aquatic organisms), it is essential to quantify and characterize of their released from larger items under environmental realistic conditions. However, the current information on the fragmentation and size-based characteristics of released microplastics, for example from bio-based thermoplastics, is largely unknown. The goal of our work was to assess the fragmentation and release of microplastics, under ultraviolet (UV) radiation and in seawater, from polylactic acid (PLA) items, a bio-based polymer, and from polypropylene (PP) items, a petroleum-based polymer. To do so, we exposed pristine items of PLA and PP, immersed in filtered natural seawater, to accelerated UV radiation for 57 and 76 days, simulating 18 and 24 months of mean natural solar irradiance in Europe. Our results indicated that 76-day UV radiation induced the fragmentation of parent plastic items and the microplastics (50 - 5000 µm) formation from both PP and PLA items. The PP samples (48 ± 26 microplastics / cm2) released up to nine times more microplastics than PLA samples (5 ± 2 microplastics / cm2) after a 76-day UV exposure, implying that the PLA tested items had a lower fragmentation rate than PP. The particles' length of released microplastics was parameterized using a power law exponent (α), to assess their size distribution. The obtained α values were 3.04 ± 0.11 and 2.54 ± 0.06 (-) for 76-day UV weathered PP and PLA, respectively, meaning that PLA microplastics had a larger sized microplastics fraction than PP particles. With respect to their two-dimensional shape, PLA microplastics also had lower width-to-length ratio (0.51 ± 0.17) and greater fiber-shaped fractions (16%) than PP microplastics (0.57 ± 0.17% and 11%, respectively). Overall, the bio-based PLA items under study were more resistant to fragmentation and release of microplastics than the petroleum-based PP tested items, and the parameterized characteristics of released microplastics were polymer-dependent. Our work indicates that even though bio-based plastics may have a slower release of fragmented particles under UV radiation compared to conventional polymer types, they still have the potential to act as a source of microplastics in the marine environment, with particles being available to biota within ingestible size fractions, if not removed before major fragmentation processes.
Collapse
Affiliation(s)
- Zhiyue Niu
- Flanders Marine Institute (VLIZ), InnovOcean Campus, Jacobsenstraat 1, 8400 Oostende, Belgium; Blue Growth Research Lab, Ghent University, Bluebridge Building, Ostend Science Park 1, 8400 Ostend, Belgium.
| | - Marco Curto
- Advanced Polymers and Composites (APC) Research Group, School of mechanical and Design Engineering, University of Portsmouth, Portsmouth PO1 3DJ, UK
| | - Maelenn Le Gall
- Marine Structures Laboratory, IFREMER, Centre de Bretagne, 29280, France
| | - Elke Demeyer
- Functional Thermoplastic Textiles, Centexbel, Industriepark Zwijnaarde 70, 9052 Gent, Belgium
| | - Jana Asselman
- Blue Growth Research Lab, Ghent University, Bluebridge Building, Ostend Science Park 1, 8400 Ostend, Belgium
| | - Colin R Janssen
- Blue Growth Research Lab, Ghent University, Bluebridge Building, Ostend Science Park 1, 8400 Ostend, Belgium
| | - Hom Nath Dhakal
- Advanced Polymers and Composites (APC) Research Group, School of mechanical and Design Engineering, University of Portsmouth, Portsmouth PO1 3DJ, UK
| | - Peter Davies
- Marine Structures Laboratory, IFREMER, Centre de Bretagne, 29280, France
| | - Ana Isabel Catarino
- Flanders Marine Institute (VLIZ), InnovOcean Campus, Jacobsenstraat 1, 8400 Oostende, Belgium
| | - Gert Everaert
- Flanders Marine Institute (VLIZ), InnovOcean Campus, Jacobsenstraat 1, 8400 Oostende, Belgium
| |
Collapse
|
30
|
Hsu YJ, Huang C, Lee M. Unveiling microplastic spectral signatures under weathering and digestive environments through shortwave infrared hyperspectral sensing. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 342:123106. [PMID: 38070648 DOI: 10.1016/j.envpol.2023.123106] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/17/2023] [Revised: 12/03/2023] [Accepted: 12/04/2023] [Indexed: 01/26/2024]
Abstract
Microplastic (MP) pollution presents a novel challenge for marine environmental protection, necessitating comprehensive and long-term monitoring and assessment approaches. Environmental MPs can undergo weathering and microorganism-related digestive processes, altering their original surface properties and chemical structure, thus complicating their quantification and identification. This study aims to establish a comprehensive hyperspectral database for weathered and digestion-degraded MPs, using a wide variety of polymer types collected as either virgin particles or commercial products (within a size range of approximately 3 mm), and to investigate the impact of these processes on their spectral characteristics. Polypropylene (PP) and polyethylene (PE) MPs exhibited significant responses to weathering treatment, as indicated by the formation of new characteristic peaks or slight peak shifts around 1679-1705 nm, which can be attributed to the formation of carbonyl and vinyl functional groups through Norrish reactions. Similarly, polyethylene terephthalate (PET), acrylonitrile butadiene styrene (ABS), and polystyrene (PS) MPs demonstrated notable degradation following digestive treatment, as evidenced by the emergence of new absorption peaks at approximately 1135-1165 nm, possibly associated with alterations involving carbonyl and vinyl functional groups. The results were further validated based on their comparable spectral characteristics of the resultant MPs to reference polymers and possible additives, considering a reasonably accurate match of approximately 80% for the studied MP samples. This study showcases the significant advantage of using shortwave infrared hyperspectral sensing for rapid identification of virgin and exposed MPs with a relatively large scan area after a simple sample preparation. This approach, combined with other complementary characterization techniques, shall provide highly throughput results for MPs identification. This research provides valuable insights into the features extracted from environmental MPs and establishes a foundation for improving their classification efficiency for environmental applications.
Collapse
Affiliation(s)
- Yu-Jhen Hsu
- Department of Safety, Health and Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan
| | - Chihchi Huang
- Department of Safety, Health and Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan
| | - Mengshan Lee
- Department of Safety, Health and Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan.
| |
Collapse
|
31
|
Mankhair RV, Singh A, Chandel MK. Characterization of excavated plastic waste from an Indian dumpsite: Investigating extent of degradation and resource recovery potential. WASTE MANAGEMENT & RESEARCH : THE JOURNAL OF THE INTERNATIONAL SOLID WASTES AND PUBLIC CLEANSING ASSOCIATION, ISWA 2024:734242X231219654. [PMID: 38233370 DOI: 10.1177/0734242x231219654] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/19/2024]
Abstract
In recent years, the concept of landfill mining has gained a lot of traction in India, and tonnes of plastic waste is being excavated. The present shift towards a circular economy necessitates to explore the use of excavated plastic waste as a source of valuable materials and energy. However, the physicochemical characteristics of plastic waste change due to the degradation and weathering process in landfills, making its valorization difficult. The current study investigates the change in physicochemical characteristics of plastic waste with age from an Indian dumpsite to identify the potential valorization options. In addition, a material and energy flow analysis was performed considering incineration treatment of plastic waste. The plastic waste ranged between 3.6 and 21% in the dumpsite and has almost doubled in recent decades, owing to the increase in plastic waste generation in India. Polyethylene (high- and low-density) accounted for approximately 66% of the excavated plastic waste and had a lot of adhered surface impurities. Mechanical pre-treatment using a shredder was effective in the removal of the adhered impurities with a recovery rate of 50-70% for polyethylene and a higher recovery of 70-90% for other types of plastic. Changes in the surface morphology of plastic waste with aging were observed through Scanning Electron Microscopy. The Fourier Transform Infrared Spectroscopy results confirmed low degradation levels for aged plastic waste, which is also confirmed through the high level of oxygen detected. The material and energy flow analysis revealed that incinerating one tonne of excavated plastic waste could produce approximately 1410 kWh of electricity.
Collapse
Affiliation(s)
- Roshan Vilasrao Mankhair
- Department of Environmental Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India
| | - Ayush Singh
- Department of Environmental Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India
| | - Munish K Chandel
- Department of Environmental Science and Engineering, Indian Institute of Technology Bombay, Mumbai, India
| |
Collapse
|
32
|
Zhang Z, Zou S, Li P. Aging of plastics in aquatic environments: Pathways, environmental behavior, ecological impacts, analyses and quantifications. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 341:122926. [PMID: 37963513 DOI: 10.1016/j.envpol.2023.122926] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/21/2023] [Revised: 10/30/2023] [Accepted: 11/10/2023] [Indexed: 11/16/2023]
Abstract
The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.
Collapse
Affiliation(s)
- Zekun Zhang
- School of Marine Sciences, Sun Yat-sen University, Zhuhai 519082, China
| | - Shichun Zou
- School of Marine Sciences, Sun Yat-sen University, Zhuhai 519082, China; Guangdong Provincial Key Laboratory of Marine Resources and Coastal Engineering, Zhuhai 519082, China
| | - Pu Li
- School of Marine Sciences, Sun Yat-sen University, Zhuhai 519082, China; Guangdong Provincial Key Laboratory of Marine Resources and Coastal Engineering, Zhuhai 519082, China.
| |
Collapse
|
33
|
Wahl A, Davranche M, Rabiller-Baudry M, Pédrot M, Khatib I, Labonne F, Canté M, Cuisinier C, Gigault J. Condition of composted microplastics after they have been buried for 30 years: Vertical distribution in the soil and degree of degradation. JOURNAL OF HAZARDOUS MATERIALS 2024; 462:132686. [PMID: 37866145 DOI: 10.1016/j.jhazmat.2023.132686] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/13/2023] [Revised: 09/26/2023] [Accepted: 09/30/2023] [Indexed: 10/24/2023]
Abstract
Microplastics in soils are a growing concern. Composting household wastes can introduce microplastics to agroecosystems, because when unsorted compost is used as a fertilizer, the plastic debris it contains degrades to microplastics. This paper examines the distribution and degradation of microplastics in agricultural soil samples to investigate their potential mobility. The source of microplastics was a household waste compost added to the soil more than 30 years before the study. The microplastics were sorted from a plot-composite soil and characterised by Attenuated Total Reflectance combined with Fourier transform infrared spectroscopy (ATR-FTIR). The microplastics are present in the cultivated depth but have not been transferred deeper (2.9 g kg-1 in the 0-5 cm soil depth against 0.9 g kg-1 in the 30-35 cm soil depth). Polyethylene (PE), polypropylene (PP), polystyrene (PS) and Polyvinylchloride (PVC) were identified in the forms of heterogeneous fragments, films, and fibres and accounted for 90% of the total microplastics. Advanced degradation observed was mainly assumed to be due to composting, though the plastic may have degraded further in the soil matrix. Highly degraded plastics are a greater danger for further leaching of contaminants into soil and our food supply.
Collapse
Affiliation(s)
- Aurélie Wahl
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France
| | - Mélanie Davranche
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France
| | - Murielle Rabiller-Baudry
- Univ Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, F-35000 Rennes, France
| | - Mathieu Pédrot
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France
| | - Imane Khatib
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France
| | - Fabian Labonne
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France
| | - Marion Canté
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France
| | - Candice Cuisinier
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France
| | - Julien Gigault
- Univ. Rennes, CNRS, Geosciences Rennes, UMR 6118, F-35000 Rennes, France; TAKUVIK CNRS/ULaval, UMI3376, Université Laval, Quebec City, QC, Canada
| |
Collapse
|
34
|
Russo S, Muscetta M, Amato P, Venezia V, Verrillo M, Rega R, Lettieri S, Cocca M, Marotta R, Vitiello G. Humic substance/metal-oxide multifunctional nanoparticles as advanced antibacterial-antimycotic agents and photocatalysts for the degradation of PLA microplastics under UVA/solar radiation. CHEMOSPHERE 2024; 346:140605. [PMID: 37931713 DOI: 10.1016/j.chemosphere.2023.140605] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/19/2023] [Revised: 10/27/2023] [Accepted: 10/31/2023] [Indexed: 11/08/2023]
Abstract
As a result of the accumulation of plastic in the environment, microplastics have become part of the food chain, boosting the resistance of fungi and bacteria which can frequently encounter human beings. Employing photocatalytic degradation is a possible route towards the removal of chemical and biological pollutants, such as plastics and microplastic wastes as well as microorganisms. Using biowaste materials to design hybrid nanoparticles with enhanced photocatalytic and antimicrobial features would uphold the principles of the circular bioeconomy. Here, two unexpensive semiconductors-namely titanium dioxide (TiO2) and zinc oxide (ZnO) - were synthetized through solvothermal synthesis and combined with humic substances deriving from agrifood biomass. The preparation led to hybrid nanoparticles exhibiting enhanced ROS-generating properties for simultaneous applications as antimicrobial agents against different bacterial and fungal strains and as photoactive catalysts to degrade polylactic acid (PLA) microplastics under UVA and solar irradiation. In comparison to bare nanoparticles, hybrid nanoparticles demonstrated higher antibacterial and antimycotic capabilities toward various pathogenic microorganisms as well as advanced photocatalytic activity in the degradation of PLA with a carbonyl index reduction in the range of 15-23%, thus confirming a noteworthy ability in microplastics photodegradation under UVA and solar irradiation.
Collapse
Affiliation(s)
- Simone Russo
- Department of Chemical, Materials and Production Engineering (DICMaPI), University of Naples Federico II, Piazzale V. Tecchio 80, 80125, Naples, Italy
| | - Marica Muscetta
- Department of Chemical, Materials and Production Engineering (DICMaPI), University of Naples Federico II, Piazzale V. Tecchio 80, 80125, Naples, Italy.
| | - Paola Amato
- Department of Chemical, Materials and Production Engineering (DICMaPI), University of Naples Federico II, Piazzale V. Tecchio 80, 80125, Naples, Italy
| | - Virginia Venezia
- Department of Chemical, Materials and Production Engineering (DICMaPI), University of Naples Federico II, Piazzale V. Tecchio 80, 80125, Naples, Italy; Department of Structures for Engineering and Architecture, University of Naples Federico II, Via Claudio 21, 80125, Naples, Italy
| | - Mariavittoria Verrillo
- Department of Agricultural Science, University of Naples Federico II, via Università 100, 80055, Portici, Italy; Centro Interdipartimentale di Ricerca sulla Risonanza Magnetica Nucleare per l'Ambiente, l'Agro-Alimentare ed i Nuovi Materiali (CERMANU), via Università 100, 80055, Portici, Italy
| | - Romina Rega
- Institute for Applied Sciences and Intelligent Systems, National Research Council (CNR-ISASI), Via Campi Flegrei 34, 80078, Pozzuoli, NA, Italy
| | - Stefano Lettieri
- Institute for Applied Sciences and Intelligent Systems, National Research Council (CNR-ISASI), Via Campi Flegrei 34, 80078, Pozzuoli, NA, Italy; Department of Physics "Ettore Pancini", University of Naples Federico II, Via Cinthia 4, Complesso di Monte Sant'Angelo, 80126, Naples, Italy
| | - Mariacristina Cocca
- Institute for Polymers, Composites and Biomaterials (IPCB), National Research Council (CNR) of Italy, Via Campi Flegrei, 34, 80078, Pozzuoli, NA, Italy
| | - Raffaele Marotta
- Department of Chemical, Materials and Production Engineering (DICMaPI), University of Naples Federico II, Piazzale V. Tecchio 80, 80125, Naples, Italy; Institute for Polymers, Composites and Biomaterials (IPCB), National Research Council (CNR) of Italy, Via Campi Flegrei, 34, 80078, Pozzuoli, NA, Italy
| | - Giuseppe Vitiello
- Department of Chemical, Materials and Production Engineering (DICMaPI), University of Naples Federico II, Piazzale V. Tecchio 80, 80125, Naples, Italy; Institute for Polymers, Composites and Biomaterials (IPCB), National Research Council (CNR) of Italy, Via Campi Flegrei, 34, 80078, Pozzuoli, NA, Italy; CSGI, Center for Colloid and Surface Science, via della Lastruccia 3, Sesto Fiorentino, FI, Italy.
| |
Collapse
|
35
|
Castillo AB, El-Azhary M, Sorino C, LeVay L. Potential ecological risk assessment of microplastics in coastal sediments: Their metal accumulation and interaction with sedimentary metal concentration. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 906:167473. [PMID: 37778558 DOI: 10.1016/j.scitotenv.2023.167473] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/05/2023] [Revised: 09/16/2023] [Accepted: 09/28/2023] [Indexed: 10/03/2023]
Abstract
Metal pollution in sediments has long been recognized, while sediments are also a long-term sink for microplastics (MPs). MPs may also adsorb environmental pollutants, including metals, as well as leaching polymer components and chemicals used during production. A comprehensive survey of 21 locations around Qatari coastline investigated abundance of MPs in high-shore intertidal sediments and concentration of metals both on MPs and sediment particles. MPs abundance ranged from 3 to 156 MPs particles·kg-1 (12-624 MPs particles·m-2) with polyethylene being the most abundant (27.4 %). MPs showed physical morphologies, with 76 % displayed signs of chemical degradation as confirmed by the carbonyl absorption peak profile, possibly due to exposure to harsh environmental conditions on the Arabian Gulf shores. Most metals analyzed were found at higher concentrations in sediments than the same metals adsorbed to MPs. The average metal concentration ranged from 0.26 (Cd) to 3122.62 μg∙g-1 (Sr) in sediments while 0.22 (Mo) to 30.26 μg∙g-1 (Sr) in MPs. The calculated metal Pollution Load Index (Sed PLI, range 0.57-2.38) for sediments indicates unpolluted to moderately polluted levels, while the Potential Ecological Risk Index (Sed PERI, range 6.9-2220) indicates a relatively considerable ecological risk for metal pollution in sediments in some of the coastal areas surveyed. PLI values calculated for metals associated with MPs (MPs PLI, range 1.1-7.5), suggests relatively moderate pollution, while the PERI for metals in MPs (MPs PERI, range 25.2-1811) has similar ecological risk in terms of metal pollutants in MPs as for sediments. This may be effective in providing relative spatial indices of pollution load and risk for metals associated with MPs, which could potentially inform establishment of an appropriate assessment framework, where MPs are increasingly abundant in coastal sediments. However, this does not account for the relatively lower abundance of MPs compared to sediments.
Collapse
Affiliation(s)
| | - Marwa El-Azhary
- Environmental Science Center, Qatar University, P.O. Box 2713, Qatar
| | - Caesar Sorino
- Environmental Science Center, Qatar University, P.O. Box 2713, Qatar
| | - Lewis LeVay
- Centre for Applied Marine Sciences, School of Ocean Sciences, Bangor University, Menai Bridge, Anglesey LL59 5EY, UK
| |
Collapse
|
36
|
Parveen N, Joseph A, Goel S. Leaching of organic matter from microplastics and its role in disinfection by-product formation. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 906:167640. [PMID: 37806590 DOI: 10.1016/j.scitotenv.2023.167640] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/24/2023] [Revised: 09/26/2023] [Accepted: 10/05/2023] [Indexed: 10/10/2023]
Abstract
Natural organic matter (NOM) is the primary precursor of disinfection by-products (DBPs). However, as emerging environmental contaminants continue to increase in natural waters, there is a possibility of new precursors of DBPs. We investigated the potential of microplastics (MPs), a growing environmental concern, for leaching organic matter (OM) and subsequent DBP formation. Two experimental setups were used, including chlorinated water containing MPs (Cl2-MP), and non-chlorinated water containing MPs (Non-Cl2-MP), using polyethylene (PE), polyethylene tetrahydrate (PET), polypropylene (PP), and polyvinyl chloride (PVC) as MP materials. The UV absorbance spectra of Cl2-PET/PP/PVC showed peaks at 218 nm, which were significantly correlated with dissolved organic carbon (DOC), indicating lower aromaticity of the leached OM. The DOC concentrations in Cl2-MP samples were several times higher than those in Non-Cl2-MP samples. The leached OM from MPs formed trihalomethanes (THMs) and haloacetic acids (HAAs) in Cl2-MP samples. Among the MPs tested, PVC showed the highest total THM formation after 7 days, followed by PET, PE, and PP. Brominated THMs were predominant, while HAAs were highly chlorinated. THM formation increased with contact time for PE, PET, and PVC, and decreased for PP. Compared to THMs, the concentration of HAAs was low (highest total THM = 185.5 μg/L per g-MP and highest total HAA = 120.7 μg/L per g-MP). Further, the total THM concentration decreased and the total HAA concentration increased over the reaction period, indicating the leaching of different types of OM with increasing contact time. Additionally, the differences in the pattern of DOC leaching and DBP formation among different MPs suggested changes in the leached OM.
Collapse
Affiliation(s)
- Naseeba Parveen
- School of Environmental Science and Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721302, India.
| | - Anuja Joseph
- School of Environmental Science and Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721302, India
| | - Sudha Goel
- School of Environmental Science and Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721302, India; Department of Civil Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721302, India
| |
Collapse
|
37
|
Bridson JH, Masterton H, Theobald B, Risani R, Doake F, Wallbank JA, Maday SDM, Lear G, Abbel R, Smith DA, Kingsbury JM, Pantos O, Northcott GL, Gaw S. Leaching and transformation of chemical additives from weathered plastic deployed in the marine environment. MARINE POLLUTION BULLETIN 2024; 198:115810. [PMID: 38006872 DOI: 10.1016/j.marpolbul.2023.115810] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/18/2023] [Revised: 11/12/2023] [Accepted: 11/14/2023] [Indexed: 11/27/2023]
Abstract
Plastic pollution causes detrimental environmental impacts, which are increasingly attributed to chemical additives. However, the behaviour of plastic additives in the marine environment is poorly understood. We used a marine deployment experiment to examine the impact of weathering on the extractables profile, analysed by liquid chromatography-mass spectrometry, of four plastics at two locations over nine months in Aotearoa/New Zealand. The concentration of additives in polyethylene and oxo-degradable polyethylene were strongly influenced by artificial weathering, with deployment location and time less influential. By comparison, polyamide 6 and polyethylene terephthalate were comparatively inert with minimal change in response to artificial weathering or deployment time. Non-target analysis revealed extensive differentiation between non-aged and aged polyethylene after deployment, concordant with the targeted analysis. These observations highlight the need to consider the impact of leaching and weathering on plastic composition when quantifying the potential impact and risk of plastic pollution within receiving environments.
Collapse
Affiliation(s)
- James H Bridson
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand; School of Physical and Chemical Sciences, University of Canterbury, Christchurch 8041, New Zealand.
| | - Hayden Masterton
- Institute of Environmental Science and Research, 27 Creyke Road, Christchurch 8041, New Zealand
| | - Beatrix Theobald
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand
| | - Regis Risani
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand
| | - Fraser Doake
- Institute of Environmental Science and Research, 27 Creyke Road, Christchurch 8041, New Zealand
| | - Jessica A Wallbank
- School of Biological Sciences, University of Auckland, 3a Symonds Street, Auckland 1010, New Zealand
| | - Stefan D M Maday
- School of Biological Sciences, University of Auckland, 3a Symonds Street, Auckland 1010, New Zealand
| | - Gavin Lear
- School of Biological Sciences, University of Auckland, 3a Symonds Street, Auckland 1010, New Zealand
| | - Robert Abbel
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand
| | - Dawn A Smith
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand
| | - Joanne M Kingsbury
- Institute of Environmental Science and Research, 27 Creyke Road, Christchurch 8041, New Zealand
| | - Olga Pantos
- Institute of Environmental Science and Research, 27 Creyke Road, Christchurch 8041, New Zealand
| | - Grant L Northcott
- Northcott Research Consultants Limited, 20 River Oaks Place, Hamilton 3200, New Zealand
| | - Sally Gaw
- School of Physical and Chemical Sciences, University of Canterbury, Christchurch 8041, New Zealand
| |
Collapse
|
38
|
Hoseini M, Stead J, Bond T. Ranking the accelerated weathering of plastic polymers. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2023; 25:2081-2091. [PMID: 37882078 DOI: 10.1039/d3em00295k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/27/2023]
Abstract
The timespans over which different plastics degrade in the environment are poorly understood. This study aimed to rank the degradation speed of five widespread plastic polymers-low density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), polylactic acid (PLA) and polyethylene terephthalate (PET)-in terms of their physicochemical properties. Five of the six samples were plastic films with identical dimensions, which allowed the influence of morphology to be excluded, with a polyethylene carrier bag (PEB) tested for comparison. An accelerated weathering chamber was used to photochemically degrade samples over 41 days, with degradation monitored via mass loss and changes to carbonyl index, crystallinity and contact angle. The mass loss ranking was PP ≫ LDPE > PEB > PS > PLA > PET. Estimates of the time needed for complete degradation ranged from 0.27 years for PP to 1179 years for PET. Therefore, mass loss in PP proceeded more rapidly than the other polymers, which was unexpected based on previous literature and is plausibly explained by the presence of an unlisted additive which accelerated degradation. Increases in carbonyl index proceeded more rapidly in PP and LDPE than the other polymers tested. However, changes in contact angle and crystallinity did not correspond to the mass loss ranking. Therefore, monitoring the carbonyl index during accelerated weathering trials can indicate which polymers will fragment more quickly. However, alternative approaches are needed to simulate conditions where photooxidation reactions are negligible, such as the ocean floor.
Collapse
Affiliation(s)
- Maryam Hoseini
- School of Sustainability, Civil and Environmental Engineering, University of Surrey, Stag Hill, Guildford GU2 7XH, UK.
- Department of Chemical and Biological Engineering, University of Sheffield, Western Bank, Sheffield S10 2TN, UK
| | - Jess Stead
- School of Sustainability, Civil and Environmental Engineering, University of Surrey, Stag Hill, Guildford GU2 7XH, UK.
| | - Tom Bond
- School of Sustainability, Civil and Environmental Engineering, University of Surrey, Stag Hill, Guildford GU2 7XH, UK.
| |
Collapse
|
39
|
Saito J, Katte Y, Nagato EG. The molecular level degradation state of drift plastics in the Sea of Japan coastline. MARINE POLLUTION BULLETIN 2023; 197:115707. [PMID: 37883812 DOI: 10.1016/j.marpolbul.2023.115707] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2023] [Revised: 10/05/2023] [Accepted: 10/19/2023] [Indexed: 10/28/2023]
Abstract
Polyethylene (PE) and polyethylene terephthalate (PET) are among the most abundant plastics polluting the oceans. However, their environmental fate depends on how they have been weathered. Due to its unique geography, the Sea of Japan is a pollution hotspot where plastics accumulate. In this study, the structures of plastics, having drifted into the Sea of Japan coastline environment, were analyzed with a particular focus on examining polymer crystallization and carbonyl formation; two factors which influence microplastic formation and the adsorption of contaminants onto plastic surfaces. PE in the coastal environment did not show evidence of crystallization, although carbonyl formation did increase. By contrast, PET bottles were shown to not be uniform in structure, with unaged bottles being less crystalline in the neck component compared to the body. Because of this difference, in environmental PET bottles, it was the bottle neck that showed increases in crystallization and carbonyl group formation.
Collapse
Affiliation(s)
- Junya Saito
- Shimane University, Faculty of Life and Environmental Science, 690-8504 Matsue, Japan
| | - Yasuharu Katte
- Shimane University, Faculty of Life and Environmental Science, 690-8504 Matsue, Japan
| | - Edward G Nagato
- Shimane University, Faculty of Life and Environmental Science, 690-8504 Matsue, Japan.
| |
Collapse
|
40
|
Yang Z, Murat Ç, Nakano H, Arakawa H. Accessing the intrinsic factors of carbonyl index of microplastics: Physical and spectral properties, baseline correction, calculation methods, and their interdependence. MARINE POLLUTION BULLETIN 2023; 197:115700. [PMID: 37897964 DOI: 10.1016/j.marpolbul.2023.115700] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/16/2023] [Revised: 09/25/2023] [Accepted: 10/19/2023] [Indexed: 10/30/2023]
Abstract
Carbonyl index (CI) is a measure of the degradation status of microplastics. While many studies address environmental factors of microplastic degradation, intrinsic factors like physical properties, spectral properties, baseline correction, and CI calculation methods are less explored. This research focused on these aspects using surface seawater samples. We found that color and shape have limited dependence on particle size or signal-to-noise ratio (SNR). Baseline correction can significantly alter CI values, with the direction of the shift depending on the methods used. Additionally, most CI values before and after baseline correction and those calculated using different methods tend to be strongly correlated. Using the selected CI calculation methods, we found that CI values varied significantly by shape and color. CI's relation to the similarity between the sample and its pristine form suggests an alternative degradation measure. Our findings emphasize the need for standardized CI calculation methods.
Collapse
Affiliation(s)
- Zijiang Yang
- Faculty of Marine Resources and Environment, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan.
| | - Çelik Murat
- Faculty of Marine Resources and Environment, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan
| | - Haruka Nakano
- Research Institute for Applied Mechanics, Kyushu University, 6-1 Kasuga-Koen, Kasuga, Fukuoka 816-8580, Japan.
| | - Hisayuki Arakawa
- Faculty of Marine Resources and Environment, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan.
| |
Collapse
|
41
|
Sommer C, Nguyen J, Menzel T, Ruckdäschel H, Koch M. Determining weathering-induced heterogeneous oxidation profiles of polyethylene, polypropylene and polystyrene using laser-induced breakdown spectroscopy. CHEMOSPHERE 2023; 343:140105. [PMID: 37714488 DOI: 10.1016/j.chemosphere.2023.140105] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2023] [Revised: 07/31/2023] [Accepted: 09/06/2023] [Indexed: 09/17/2023]
Abstract
Weathering-induced polymer degradation is typically heterogeneous which plays an integral part in fragmentation. Despite that, the current selection of techniques to investigate such heterogeneities, especially beneath the sample surface, is sparse. We introduce Laser-induced Breakdown Spectroscopy (LIBS) as an analytical tool and evaluate its performance for depth profiling. Three types of polymers were selected (polyethylene, polypropylene, and polystyrene) that were aged under controlled conditions. We demonstrate that LIBS can detect heterogeneous oxidation on the surface and inside the samples. The results reveal that different oxidation behaviors are linked to the sample's lattice structure and the subsequent formation of microcracks. This implies that LIBS is beneficial to give additional insights into the weathering and degradation behavior of environmentally relevant plastics.
Collapse
Affiliation(s)
- Caroline Sommer
- Faculty of Physics and Material Sciences Centre, Philipps-University Marburg, 35037, Marburg, Germany.
| | - Johnny Nguyen
- Faculty of Physics and Material Sciences Centre, Philipps-University Marburg, 35037, Marburg, Germany
| | - Teresa Menzel
- Department Polymer Engineering, University of Bayreuth, 95447, Bayreuth, Germany
| | - Holger Ruckdäschel
- Department Polymer Engineering, University of Bayreuth, 95447, Bayreuth, Germany
| | - Martin Koch
- Faculty of Physics and Material Sciences Centre, Philipps-University Marburg, 35037, Marburg, Germany
| |
Collapse
|
42
|
Yan P, Hao X, Zhang S. Extraction and decontamination of microplastics from high organic matter soils: A simple, cost-saving and high efficient method. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 344:118381. [PMID: 37329579 DOI: 10.1016/j.jenvman.2023.118381] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2023] [Revised: 05/21/2023] [Accepted: 06/11/2023] [Indexed: 06/19/2023]
Abstract
This article introduces a simple, cost-saving and high efficient for the extraction and separation of microplastics (MPs) from soil with a high organic matter (SOM) content. In this study, MP with particle sizes of 154-600 μm of polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC) and polyethylene terephthalate (PET) were artificially added into the five Mollisols with the high SOM. Three flotation solutions were used to extract these MPs from soils, and four digestion solutions were used to digest the SOM. As well, their destruction effects on MPs were also examined. The results showed that the flotation recovery rates of PE, PP, PS, PVC and PET were 96.1%-99.0% by ZnCl2 solution, while were 102.0%-107.2% by rapeseed oil, were 100.0%-104.7% by soybean oil. The digestion rate of SOM was 89.3% by H2SO4:H2O2 (1:40, v:v) at 70 °C for 48 h, and this was higher than by H2O2 (30%), NaOH and Fenton's reagent. However, the digestion rate of PE, PP, PS, PVC and PET were 0.0%-0.54% by H2SO4:H2O2 (1:40, v:v), and this was lower than by H2O2 (30%), NaOH and Fenton's reagent. As well, the factors influencing on MP extraction was also discussed. Generally, the best flotation solution was ZnCl2 (ρ > 1.6 g cm-3) and the best digestion method was H2SO4:H2O2 (1:40, v:v) at 70 °C for 48 h. The optimal extraction and digestion method were verified by the known concentrations of MPs (recovery rate of MPs was 95.7-101.7%), and this method was also used to extract MPs from long-term mulching vegetable fields in Mollisols of Northeast China.
Collapse
Affiliation(s)
- Pengke Yan
- Northeast Agricultural University, 600 Changjiang Rd, Harbin, 150030, PR China
| | - Xinhua Hao
- Northeast Agricultural University, 600 Changjiang Rd, Harbin, 150030, PR China
| | - Shaoliang Zhang
- Northeast Agricultural University, 600 Changjiang Rd, Harbin, 150030, PR China.
| |
Collapse
|
43
|
Bridson JH, Abbel R, Smith DA, Northcott GL, Gaw S. Impact of accelerated weathering on the leaching kinetics of stabiliser additives from microplastics. JOURNAL OF HAZARDOUS MATERIALS 2023; 459:132303. [PMID: 37595471 DOI: 10.1016/j.jhazmat.2023.132303] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2023] [Revised: 08/01/2023] [Accepted: 08/12/2023] [Indexed: 08/20/2023]
Abstract
The release of additives from microplastics is known to harm organisms. In the environment, microplastics are exposed to weathering processes which are suspected to influence additive leaching kinetics, the extent and mechanism of which remain poorly understood. We examined the impact of weathering on stabiliser additive leaching kinetics using environmentally relevant accelerated weathering and leaching procedures. Nine binary polymer-additive formulations were specifically prepared, weathered, analysed, and evaluated for their leaching characteristics. Cumulative additive release (Ce) varied widely between formulations, ranging from 0.009 to 1162 µg/g. Values of Ce generally increased by polymer type in the order polyethylene terephthalate < polyamide 6 < polyethylene. The change in leaching kinetics after accelerated weathering was incongruous across the nine formulations, with a significant change in Ce only observed for three out of nine formulations. Physicochemical characterisation of the microplastics demonstrated that additive blooming was the primary mechanism influencing the leaching response to weathering. These findings highlight the dependency of additive fate on the polymer type, additive chemistry, and the extent of weathering exposure. This has significant implications for risk assessment and mitigation, where the general assumption that polymer weathering increases additive leaching may be too simplistic.
Collapse
Affiliation(s)
- James H Bridson
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand; School of Physical and Chemical Sciences, University of Canterbury, Christchurch 8041, New Zealand.
| | - Robert Abbel
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand
| | - Dawn A Smith
- Scion, Titokorangi Drive, Private Bag 3020, Rotorua 3046, New Zealand
| | - Grant L Northcott
- Northcott Research Consultants Limited, 20 River Oaks Place, Hamilton 3200, New Zealand
| | - Sally Gaw
- School of Physical and Chemical Sciences, University of Canterbury, Christchurch 8041, New Zealand
| |
Collapse
|
44
|
Alimi OS, Claveau-Mallet D, Lapointe M, Biu T, Liu L, Hernandez LM, Bayen S, Tufenkji N. Effects of weathering on the properties and fate of secondary microplastics from a polystyrene single-use cup. JOURNAL OF HAZARDOUS MATERIALS 2023; 459:131855. [PMID: 37478596 DOI: 10.1016/j.jhazmat.2023.131855] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2023] [Revised: 05/31/2023] [Accepted: 06/13/2023] [Indexed: 07/23/2023]
Abstract
In this work, we probed the changes to some physicochemical properties of polystyrene microplastics generated from a disposable cup as a result of UV-weathering, using a range of spectroscopy, microscopy, and profilometry techniques. Thereafter, we aimed to understand how these physicochemical changes affect the microplastic transport potential and contaminant sorption ability in model freshwaters. Exposure to UV led to measured changes in microplastic hydrophobicity (20-23 % decrease), density (3% increase), carbonyl index (up to 746 % increase), and microscale roughness (24-86 % increase). The settling velocity of the microplastics increased by 53 % after weathering which suggests that UV aging can increase microplastic deposition to sediments. This impact of aging was greater than the effect of the water temperature. Weathered microplastics exhibited reduced sorption capacity (up to 52 % decrease) to a model hydrophobic contaminant (triclosan) compared to unaged ones. The adsorption of triclosan to both microplastics was slightly reversible with notable desorption hysteresis. These combined effects of weathering could potentially increase the transport potential while decreasing the contaminant transport abilities of microplastics. This work provides new insights on the sorption capacity and mobility of a secondary microplastic, advances our knowledge about their risks in aquatic environments, and the need to use environmentally relevant microplastics.
Collapse
Affiliation(s)
- Olubukola S Alimi
- Department of Chemical Engineering, McGill University, Montreal, Quebec, H3A 0C5 Canada; Department of Civil and Environmental Engineering, University of Alberta, Edmonton, T6G 1H9 Canada.
| | - Dominique Claveau-Mallet
- Department of Chemical Engineering, McGill University, Montreal, Quebec, H3A 0C5 Canada; Department of Civil, Geological and Mining Engineering, Polytechnique Montreal, 2900 Edouard-Montpetit, Montreal, Canada
| | - Mathieu Lapointe
- Department of Chemical Engineering, McGill University, Montreal, Quebec, H3A 0C5 Canada; Department of Construction Engineering, École de technologie supérieure - University of Québec, Montreal, Quebec, H3C 1K3, Canada
| | - Thinh Biu
- Department of Chemical Engineering, McGill University, Montreal, Quebec, H3A 0C5 Canada
| | - Lan Liu
- Department of Food Science and Agricultural Chemistry, McGill University, 21111 Lakeshore, Ste Anne de Bellevue, Montreal, Canada
| | - Laura M Hernandez
- Department of Chemical Engineering, McGill University, Montreal, Quebec, H3A 0C5 Canada
| | - Stéphane Bayen
- Department of Food Science and Agricultural Chemistry, McGill University, 21111 Lakeshore, Ste Anne de Bellevue, Montreal, Canada
| | - Nathalie Tufenkji
- Department of Chemical Engineering, McGill University, Montreal, Quebec, H3A 0C5 Canada
| |
Collapse
|
45
|
Singleton SL, Davis EW, Arnold HK, Daniels AMY, Brander SM, Parsons RJ, Sharpton TJ, Giovannoni SJ. Identification of rare microbial colonizers of plastic materials incubated in a coral reef environment. Front Microbiol 2023; 14:1259014. [PMID: 37869676 PMCID: PMC10585116 DOI: 10.3389/fmicb.2023.1259014] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2023] [Accepted: 09/15/2023] [Indexed: 10/24/2023] Open
Abstract
Plastic waste accumulation in marine environments has complex, unintended impacts on ecology that cross levels of community organization. To measure succession in polyolefin-colonizing marine bacterial communities, an in situ time-series experiment was conducted in the oligotrophic coastal waters of the Bermuda Platform. Our goals were to identify polyolefin colonizing taxa and isolate bacterial cultures for future studies of the biochemistry of microbe-plastic interactions. HDPE, LDPE, PP, and glass coupons were incubated in surface seawater for 11 weeks and sampled at two-week intervals. 16S rDNA sequencing and ATR-FTIR/HIM were used to assess biofilm community structure and chemical changes in polymer surfaces. The dominant colonizing taxa were previously reported cosmopolitan colonizers of surfaces in marine environments, which were highly similar among the different plastic types. However, significant differences in rare community composition were observed between plastic types, potentially indicating specific interactions based on surface chemistry. Unexpectedly, a major transition in community composition occurred in all material treatments between days 42 and 56 (p < 0.01). Before the transition, Alteromonadaceae, Marinomonadaceae, Saccharospirillaceae, Vibrionaceae, Thalassospiraceae, and Flavobacteriaceae were the dominant colonizers. Following the transition, the relative abundance of these taxa declined, while Hyphomonadaceae, Rhodobacteraceae and Saprospiraceae increased. Over the course of the incubation, 8,641 colonizing taxa were observed, of which 25 were significantly enriched on specific polyolefins. Seven enriched taxa from families known to include hydrocarbon degraders (Hyphomonadaceae, Parvularculaceae and Rhodobacteraceae) and one n-alkane degrader (Ketobacter sp.). The ASVs that exhibited associations with specific polyolefins are targets of ongoing investigations aimed at retrieving plastic-degrading microbes in culture.
Collapse
Affiliation(s)
| | - Edward W. Davis
- Department of Microbiology, Oregon State University, Corvallis, OR, United States
| | - Holly K. Arnold
- Department of Microbiology, Oregon State University, Corvallis, OR, United States
| | | | - Susanne M. Brander
- Department of Fisheries, Wildlife, and Conservation Sciences, Coastal Oregon Marine Experiment Station, Oregon State University, Newport, OR, United States
| | | | - Thomas J. Sharpton
- Department of Microbiology, Oregon State University, Corvallis, OR, United States
| | | |
Collapse
|
46
|
Schefer RB, Armanious A, Mitrano DM. Eco-Corona Formation on Plastics: Adsorption of Dissolved Organic Matter to Pristine and Photochemically Weathered Polymer Surfaces. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2023; 57:14707-14716. [PMID: 37722069 DOI: 10.1021/acs.est.3c04180] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/20/2023]
Abstract
Plastic fate in freshwater systems is dependent on particle size, morphology, and physicochemical surface properties (e.g., charge, surface roughness, and hydrophobicity). Environmental aging processes, such as photochemical weathering and eco-corona formation due to dissolved organic matter (DOM) adsorption on plastic surfaces, can alter their physicochemical properties, affecting fate and transport. While plastic aging has been studied from a materials science perspective, its specific implications in environmental contexts remain less understood. Although photochemical weathering and eco-corona formation occur simultaneously in the environment, in this work, we systematically assessed the effects of photochemical weathering on the physicochemical properties of polymers (polyethylene, polypropylene, polyethylene terephthalate, and polystyrene) and how this influences the adsorption of DOMs (Suwannee River humic acid, fulvic acid, and natural organic matter) relative to pristine polymers. Pristine polymers initially had different and distinct physicochemical surface properties, but upon aging, they became more similar in terms of surface properties. Photochemical weathering resulted in a decrease in polymer film thickness, an increase in surface roughness, and hydrophilicity. DOM adlayers on the polymer surfaces resulted in more comparable wettability, effectively masking the initial polymer properties. Collectively, this study explores the physiochemical changes polymers undergo in laboratory studies mimicking environmental conditions. Understanding these changes is the initial step to rationalizing and predicting processes and interactions such as heteroaggregation that dictate the fate of plastics in the environment.
Collapse
Affiliation(s)
- Roman B Schefer
- Environmental Systems Science Department, ETH Zürich, Universitätstrasse 16, 8092 Zurich, Switzerland
| | - Antonius Armanious
- Department of Health Science and Technology, ETH Zürich, Universitätstrasse 2, 8092 Zurich, Switzerland
| | - Denise M Mitrano
- Environmental Systems Science Department, ETH Zürich, Universitätstrasse 16, 8092 Zurich, Switzerland
| |
Collapse
|
47
|
Senathirajah K, Kandaiah R, Panneerselvan L, Sathish CI, Palanisami T. Fate and transformation of microplastics due to electrocoagulation treatment: Impacts of polymer type and shape. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 334:122159. [PMID: 37442330 DOI: 10.1016/j.envpol.2023.122159] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/23/2023] [Revised: 06/26/2023] [Accepted: 07/07/2023] [Indexed: 07/15/2023]
Abstract
The prevalence and adverse impacts of microplastics requires the identification of science-based abatement measures. Electrocoagulation treatment is a cost-effective oxidation process that removes numerous pollutants, including to some extent, microplastics. The performance of a custom-built electrocoagulation reactor was determined by calculating the removal efficiency. The effects of the oxidation process on polymer types (polyamide (PA), polyethylene (PE), polyethylene terephthalate (PET) and polypropylene (PP)) and shapes (fibres and fragments) were investigated in synthetic wastewater and laundry wastewater. The calculated removal efficiency suggested that electrocoagulation treatment was an effective technology for microplastics abatement. More fibres tended to be removed than fragments, viz. 92% fibres removed versus 88% fragments. The findings also demonstrated that specific polymers were preferentially removed, viz. PET > LDPE > PP > PA. Further analysis indicated that the electrocoagulation treatment affected microplastic polymers physically, viz. flaking and changed surface conditions, as well as chemically, viz. changes in vibrational energies of C-O-C stretching bonds, C=O stretching bonds, C-H stretching bonds and formation of reactive oxygen species (ROS). Our findings indicate that whilst seemingly effective, electrocoagulation treatment induces changes to microplastic polymers that could beneficially lead to degradation, and/or further fragmentation or breakdown and thereby potentially generating more bioavailable toxic nanoplastic byproducts.
Collapse
Affiliation(s)
- Kala Senathirajah
- Environmental and Plastic Innovation Cluster (EPIC), Global Innovative Centre for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW, 2308, Australia.
| | - Raji Kandaiah
- Environmental and Plastic Innovation Cluster (EPIC), Global Innovative Centre for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW, 2308, Australia
| | - Logeshwaran Panneerselvan
- Environmental and Plastic Innovation Cluster (EPIC), Global Innovative Centre for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW, 2308, Australia
| | - C I Sathish
- Environmental and Plastic Innovation Cluster (EPIC), Global Innovative Centre for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW, 2308, Australia
| | - Thavamani Palanisami
- Environmental and Plastic Innovation Cluster (EPIC), Global Innovative Centre for Advanced Nanomaterials (GICAN), Faculty of Engineering and Built Environment, The University of Newcastle, Callaghan, NSW, 2308, Australia.
| |
Collapse
|
48
|
Jeyaraj J, Baskaralingam V, Stalin T, Muthuvel I. Mechanistic vision on polypropylene microplastics degradation by solar radiation using TiO 2 nanoparticle as photocatalyst. ENVIRONMENTAL RESEARCH 2023; 233:116366. [PMID: 37302740 DOI: 10.1016/j.envres.2023.116366] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/26/2023] [Revised: 05/25/2023] [Accepted: 06/08/2023] [Indexed: 06/13/2023]
Abstract
Microplastics are emerging contaminants owing to their occurrence and distribution in everywhere the ecosystem and leading to major environmental problems. Management methods are more suitable for larger-sized plastics. Here, the current study elucidates that, TiO2 photocatalyst under sunlight irradiation actively mitigates polypropylene microplastics (pH 3, 50 h) in an aqueous medium. End of post-photocatalytic experiments, the weight loss percentage of microplastics was 50.5 ± 0.5%. Fourier transforms infrared (FTIR) and nuclear magnetic resonance spectroscopy (1H NMR) spectroscopy results revealed the formation of peroxide and hydroperoxide ions, carbonyl, keto and ester groups at the end of the post-degradation process. Ultraviolet-Visible Diffuse Reflectance spectroscopic (UV - DRS) results showed variation in the optical absorbance of polypropylene microplastics peak values at 219 and 253 nm. Increased the weight percentage of oxygen level due to the oxidation of functional groups and decreased the weight percentage of carbon content in electron dispersive spectroscopy (EDS), probably owing to breakdown of long-chain polypropylene microplastics. In addition, scanning electron microscopy (SEM) microscopic analysis showed the surface having holes, cavities, and cracks on irritated polypropylene microplastics. The overall study and their mechanistic pathway strongly confirmed the formation of reactive oxygen species (ROS) with help of the movement of electrons by photocatalyst under solar irradiation which aids the degradation of polypropylene microplastics.
Collapse
Affiliation(s)
- Jeyavani Jeyaraj
- Biomaterials and Biotechnology in Animal Health Lab, Department of Animal Health and Management, Science Campus, 6th Floor, Alagappa University, Karaikudi, 630004, Tamil Nadu, India
| | - Vaseeharan Baskaralingam
- Biomaterials and Biotechnology in Animal Health Lab, Department of Animal Health and Management, Science Campus, 6th Floor, Alagappa University, Karaikudi, 630004, Tamil Nadu, India.
| | - Thambusamy Stalin
- Department of Industrial Chemistry, Alagappa University, Karaikudi, Tamil Nadu, 630003, India
| | - Inbasekaran Muthuvel
- Advanced Photocatalysis Laboratory, Department of Chemistry, Annamalai University, Annamalaingar, 608 002, Tamil Nadu, India; Photocatalysis Laboratory, Department of Chemistry, M.R.Govt.Arts College, Mannargudi, 614 001, Tamil Nadu, India
| |
Collapse
|
49
|
Yang Z, Çelik M, Arakawa H. Challenges of Raman spectra to estimate carbonyl index of microplastics: A case study with environmental samples from sea surface. MARINE POLLUTION BULLETIN 2023; 194:115362. [PMID: 37549535 DOI: 10.1016/j.marpolbul.2023.115362] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/07/2023] [Revised: 06/19/2023] [Accepted: 07/30/2023] [Indexed: 08/09/2023]
Abstract
This study investigates the feasibility of using the carbonyl index (CI) derived from Raman spectra as an indicator of plastic degradation and its relationship with the CI calculated from Fourier transform infrared (FTIR) spectra, using microplastic samples of polyethylene (PE) from surface seawater. Multiple methods were used to calculate the CI values of FTIR spectra, while proposed methods were used to calculate the corresponding CI values of Raman spectra. Some significant relations between FTIR CI and Raman CI were observed. However, small R2 values suggest weak functional relationships, which can be attributed to the low signal-to-noise ratio (SNR) of Raman spectra. These results highlight the challenges of establishing a functional relationship between FTIR CI and Raman CI, including challenges such as the uniformity of Raman spectra, determining optimal Raman measurement parameters, selecting appropriate peaks for Raman CI calculation, deciding on spectral processing methods, and addressing the interdependence of these issues.
Collapse
Affiliation(s)
- Zijiang Yang
- Department of Ocean Sciences, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan.
| | - Murat Çelik
- Department of Ocean Sciences, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan
| | - Hisayuki Arakawa
- Department of Ocean Sciences, Tokyo University of Marine Science and Technology, Konan 4-5-7, Minato-Ku, Tokyo 108-8477, Japan.
| |
Collapse
|
50
|
Du T, Shao S, Qian L, Meng R, Li T, Wu L, Li Y. Effects of photochlorination on the physicochemical transformation of polystyrene nanoplastics: Mechanism and environmental fate. WATER RESEARCH 2023; 243:120367. [PMID: 37499544 DOI: 10.1016/j.watres.2023.120367] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2023] [Revised: 07/12/2023] [Accepted: 07/14/2023] [Indexed: 07/29/2023]
Abstract
With the increasingly severe plastic pollution, the environmental behavior and effects of nanoplastics (NPs) have attracted much attention. The transformation of NPs in natural and engineered environments (e.g., photooxidation, disinfection) can significantly alter the physicochemical properties and thus affect the fate and toxicity of NPs. However, how solar irradiation with free chlorine, an inevitable process once NPs enter the environment from wastewater treatment plants, affects the physicochemical properties of NPs is still unclear. In this study, the behavior and mechanism of polystyrene (PS) NPs transformation in the solar/chlorine process were evaluated. The results demonstrated that solar irradiation significantly enhanced the physicochemical transformation of PS NPs during chlorination, including chain scission, surface oxidation, and organic release. In addition, two-dimensional correlation spectroscopy analysis using Fourier transform infrared spectroscopy and reactive species quenching experiments showed that chain scission and surface oxidation of PS NPs were primarily caused by direct oxidation of hydroxyl radicals and ozone, while reactive chlorine species played an indirect role. Moreover, photochlorination-induced changes in the properties of PS NPs enhanced the colloidal stability in synthetic wastewater solution and toxicity to Caenorhabditis elegans. These findings reveal an important transformation behavior of nanoplastics in the environment and emphasize the importance of accounting for photochlorination to accurately assess the ecological risk of nanoplastics.
Collapse
Affiliation(s)
- Tingting Du
- Information Materials and Intelligent Sensing Laboratory of Anhui Province, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China.
| | - Song Shao
- Information Materials and Intelligent Sensing Laboratory of Anhui Province, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China
| | - Liwen Qian
- Information Materials and Intelligent Sensing Laboratory of Anhui Province, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China
| | - Ru Meng
- Information Materials and Intelligent Sensing Laboratory of Anhui Province, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China
| | - Tong Li
- Information Materials and Intelligent Sensing Laboratory of Anhui Province, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China
| | - Lijun Wu
- Information Materials and Intelligent Sensing Laboratory of Anhui Province, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China
| | - Yao Li
- College of Environmental Science and Engineering, Ministry of Education Key Laboratory of Pollution Processes and Environmental Criteria, Tianjin Key Laboratory of Environmental Remediation and Pollution Control, Nankai University, Tianjin 300350, China.
| |
Collapse
|