Recent advances on iron oxide magnetic nanoparticles as sorbents of organic pollutants in water and wastewater treatment

Investigating the synergy of rapidly synthesized iron oxide predecessor and plasma-gaseous species for dye-removal to reuse water in irrigation

This study explores a novel and sustainable approach to reusing textile wastewater for irrigation. This is investigated by degrading Evans blue dye, a model azo dye, in wastewater by combining iron oxide predecessor (IOP) catalyst with gaseous species generated by multi-electrode cylindrical plasma device (MCPD). Analysis of IOP-plasma gaseous species revealed the generation of different types of reactive oxygen species in solution which were responsible for degradation of model dye. Key factors influencing the degradation process were studied by performing optimization experiments that resulted in rates of up to 0.008 L mg-1 min-1, more than twice as fast as using plasma gas treatment alone. These studies included mechanistic response of MCPD generated gaseous species with the IOP. In particular, reusability testing of IOP affirmed the robustness and performance efficiency up to three cycles. Finally, toxicity analysis revealed not only reduced negative effects on plant growth by the treated wastewater, but also it can used as minerals to plants. These findings highlight the feasibility of the IOP-MCPD system as a sustainable and eco-friendly solution to reduce scarcity of water in irrigation by treating textile effluent.

Development of dispersive solid phase extraction method for the preconcentration of parathion ethyl as a simulant of nerve agent sarin from soil, plant and water samples prior to GC-MS determination

In the presented study, an efficient and fast analytical method was developed for the determination of parathion ethyl as sarin simulant by gas chromatography-mass spectrometry (GC-MS). Dispersive solid phase extraction (DSPE) was performed to concentrate parathion ethyl from soil, plant and water samples. Reduced graphene oxide-iron (II, III) oxide (rGO-Fe3O4) nanocomposite was used as an adsorbent to collect the target analyte from the aqueous sample solutions. After the optimization of extraction/preconcentration parameters, optimum conditions for adsorbent amount, eluent type, mixing type/period, eluent volume and initial sample volume were determined as 15 mg, acetonitrile, vortex/30 s, 100 µL and 10 mL, respectively. Under the optimum conditions, analytical performance of the developed DSPE-GC-MS method was evaluated in terms of limit of detection (LOD), limit of quantitation (LOQ) and dynamic range. Dynamic range, LOD and LOQ values were figured out to be 0.94-235.15 µg/kg, 0.41 µg/kg and 1.36 µg/kg (mass based), respectively. Satisfactory percent recovery results (90.3-125% for soil, 93.5-108.7% for plant, 88.5-112.9% for tap water) were achieved for soil, plant and tap water samples which proved the accuracy and applicability of the developed method. It is predicted that the DSPE-GC-MS method can be accurately used for the detection of sarin in soil, plant and water samples taken from war territories.

Emerging iron-based mesoporous materials for adsorptive removal of pollutants: Mechanism, optimization, challenges, and future perspective

Iron-based materials (IBMs) have shown promise as adsorbents due to their unique physicochemical properties. This review provides an overview of the different types of IBMs, their synthesis methods, and their properties. Results found in the adsorption of emerging contaminants to a wide range of IBMs are discussed. The IBMs used were evaluated in terms of their maximum uptake capacity, with special consideration given to environmental conditions such as contact time, solution pH, initial pollutant concentration, etc. The adsorption mechanisms of pollutants are discussed taking into account the results of kinetic, isotherm, thermodynamic studies, surface complexation modelling (SCM), and available spectroscopic data. A current overview of molecular modeling and simulation studies related to density functional theory (DFT), surface response methodology (RSM), and artificial neural network (ANN) is presented. In addition, the reusability and suitability of IBMs in real wastewater treatment is shown. The review concludes with the strengths and weaknesses of current research and suggests ideas for future research that will improve our ability to remove contaminants from real wastewater streams.

Characteristics and Antimicrobial Activities of Iron Oxide Nanoparticles Obtained via Mixed-Mode Chemical/Biogenic Synthesis Using Spent Hop (Humulus lupulus L.) Extracts

Iron oxide nanoparticles (IONPs) have many practical applications, ranging from environmental protection to biomedicine. IONPs are being investigated due to their high potential for antimicrobial activity and lack of toxicity to humans. However, the biological activity of IONPs is not uniform and depends on the synthesis conditions, which affect the shape, size and surface modification. The aim of this work is to synthesise IONPs using a mixed method, i.e., chemical co-precipitation combined with biogenic surface modification, using extracts from spent hops (Humulus lupulus L.) obtained as waste product from supercritical carbon dioxide hop extraction. Different extracts (water, dimethyl sulfoxide (DMSO), 80% ethanol, acetone, water) were further evaluated for antioxidant activity based on the silver nanoparticle antioxidant capacity (SNPAC), total phenolic content (TPC) and total flavonoid content (TFC). The IONPs were characterised via UV-vis spectroscopy, scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS) and Fourier-transform infrared (FT-IR) spectroscopy. Spent hop extracts showed a high number of flavonoid compounds. The efficiency of the solvents used for the extraction can be classified as follows: DMSO > 80% ethanol > acetone > water. FT-IR/ATR spectra revealed the involvement of flavonoids such as xanthohumol and/or isoxanthohumol, bitter acids (i.e., humulones, lupulones) and proteins in the surface modification of the IONPs. SEM images showed a granular, spherical structure of the IONPs with diameters ranging from 81.16 to 142.5 nm. Surface modification with extracts generally weakened the activity of the IONPs against the tested Gram-positive and Gram-negative bacteria and yeasts by half. Only the modification of IONPs with DMSO extract improved their antibacterial properties against Gram-positive bacteria (Staphylococcus epidermidis, Staphylococcus aureus, Micrococcus luteus, Enterococcus faecalis, Bacillus cereus) from a MIC value of 2.5-10 mg/mL to 0.313-1.25 mg/mL.

A holistic NMR framework to understand environmental impact: Examining the impacts of superparamagnetic iron oxide nanoparticles (SPIONs) in Daphnia magna via imaging, spectroscopy, and metabolomics

Superparamagnetic iron oxide nanoparticles (SPIONs) are a contaminant of emerging interest, often used in the medical field as an imaging contrast agent, with additional uses in wastewater treatment and as food additives. Although the use of SPIONs is increasing, little research has been conducted on the toxic impacts to living organisms beyond traditional lethal concentration endpoints. Daphnia magna are model organisms for aquatic toxicity testing with a well understood metabolome and high sensitivity to SPIONs. Thus, as environmental concentrations continue to increase, it is becoming critical to understand their sub-lethal toxicity. Due to the paramagnetic nature of SPIONs, a range of potential nuclear magnetic resonance spectroscopy (NMR) experiments are possible, offering the potential to probe the physical location (via imaging), binding (via relaxation weighted spectroscopy), and the biochemical pathways impacted (via in vivo metabolomics). Results indicate binding to carbohydrates, likely chitin in the exoskeleton, along with a decrease in energy metabolites and specific biomarkers of oxidative stress. The holistic NMR framework used here helps provide a more comprehensive understanding of SPIONs impacts on D. magna and showcases NMR's versatility in providing physical, chemical, and biochemical insights.

A narrative review of the synthesis, characterization, and applications of iron oxide nanoparticles

The significance of green synthesized nanomaterials with a uniform shape, reduced sizes, superior mechanical capabilities, phase microstructure, magnetic behavior, and superior performance cannot be overemphasized. Iron oxide nanoparticles (IONPs) are found within the size range of 1-100 nm in nanomaterials and have a diverse range of applications in fields such as biomedicine, wastewater purification, and environmental remediation. Nevertheless, the understanding of their fundamental material composition, chemical reactions, toxicological properties, and research methodologies is constrained and extensively elucidated during their practical implementation. The importance of producing IONPs using advanced nanofabrication techniques that exhibit strong potential for disease therapy, microbial pathogen control, and elimination of cancer cells is underscored by the adoption of the green synthesis approach. These IONPs can serve as viable alternatives for soil remediation and the elimination of environmental contaminants. Therefore, this paper presents a comprehensive analysis of the research conducted on different types of IONPs and IONP composite-based materials. It examines the synthesis methods and characterization techniques employed in these studies and also addresses the obstacles encountered in prior investigations with comparable objectives. A green engineering strategy was proposed for the synthesis, characterization, and application of IONPs and their composites with reduced environmental impact. Additionally, the influence of their phase structure, magnetic properties, biocompatibility, toxicity, milling time, nanoparticle size, and shape was also discussed. The study proposes the use of biological and physicochemical methods as a more viable alternative nanofabrication strategy that can mitigate the limitations imposed by the conventional methods of IONP synthesis.

Enhancing Cu2+ Ion Removal: An Innovative Approach Utilizing Modified Frankincense Gum Combined with Multiwalled Carbon Tubes and Iron Oxide Nanoparticles as Adsorbent

Aquatic pollution, which includes organic debris and heavy metals, is a severe issue for living things. Copper pollution is hazardous to people, and there is a need to develop effective methods for eliminating it from the environment. To address this issue, a novel adsorbent composed of frankincense-modified multi-walled carbon nanotubes (Fr-MMWCNTs) and Fe3O4 [Fr-MWCNT-Fe3O4] was created and subjected to characterization. Batch adsorption tests showed that Fr-MWCNT-Fe3O4 had a maximum adsorption capacity of 250 mg/g at 308 K and could efficiently remove Cu2+ ions over a pH range of 6 to 8. The adsorption process followed the pseudo-second-order and Langmuir models, and its thermodynamics were identified as endothermic. Functional groups on the surface of modified MWCNTs improved their adsorption capacity, and a rise in temperature increased the adsorption efficiency. These results highlight the Fr-MWCNT-Fe3O4 composites' potential as an efficient adsorbent for removing Cu2+ ions from untreated natural water sources.

Green composites based on volcanic red algae Cyanidiales, cellulose, and coffee waste biomass modified with magnetic nanoparticles for the removal of methylene blue

In this paper, green nanocomposites based on biomass and superparamagnetic nanoparticles were synthesized and used as adsorbents to remove methylene blue (MB) from water with magnetic separation. The adsorbents were synthesized through the wet co-precipitation technique, in which iron-oxide nanoparticles coated the cores based on coffee, cellulose, and red volcanic algae waste. The procedure resulted in materials that could be easily separated from aqueous solutions with magnets. The morphology and chemical composition of the nanocomposites were characterized by SEM, FT-IR, and XPS methods. The adsorption studies of MB removal with UV-vis spectrometry showed that the adsorption performance of the prepared materials strongly depended on their morphology and the type of the organic adsorbent. The adsorption studies presented the highest effectiveness in neutral pH with only a slight effect on ionic strength. The MB removal undergoes pseudo-second kinetics for all adsorbents. The maximal adsorption capacity for the coffee@Fe₃O₄-2, cellulose@Fe₃O₄-1, and algae@Fe₃O₄-1 is 38.23 mg g^-1, 41.61 mg g^-1, and 48.41 mg g^-1, respectively. The mechanism of MB adsorption follows the Langmuir model using coffee@Fe₃O₄ and cellulose@Fe₃O₄, while for algae@Fe₃O₄ the process fits to the Redlich-Peterson model. The removal efficiency analysis based on UV-vis adsorption spectra revealed that the adsorption effectiveness of the nanocomposites increased as follows: coffee@Fe₃O₄-2 > cellulose@Fe₃O₄-1 > algae@Fe₃O₄-1, demonstrating an MB removal efficiency of up to 90%.

In situ anchoring of iron and zinc oxides nanoparticles onto rice husk cellulose for efficient wastewater remediation

The development of effective and economical technologies for the treatment of contaminated wastewater has been of great significance to researchers. Therefore, an equal molar ratio of iron and zinc oxides nanoparticles was hydrothermally immobilized on the cellulose fibers of rice husk. Using XRD, SEM, FTIR, EDX, TEM, VSM, BET, and TGA/DTG, the structure, and characteristics of Cel/α-Fe₂O₃-ZnO, a ternary nanocomposite, were affirmed. The nanocomposite displayed a mesoporous structure with a substantial surface area. The efficiency of nanocomposite as a new adsorbent has been studied for the extraction of reactive black 5 (RB5), which is a diazo-anionic dye from simulated wastewater. The medium's pH was the dominant factor of RB5 adsorption, and the optimal removal effectiveness was acquired at pH 2. The adsorption values of RB5 correspond to second-order kinetics. They also matched Langmuir with a maximum capacity of 99.30 mg g^-1. For real industrial wastewater, Cel/α-Fe₂O₃-ZnO has successfully reduced a number of major pollutants, including ammonia (92.73 %), color (92.88 %), COD (91.53 %), BOD₅ (84.97 %), TSS (96.27 %), TP (52.17 %) and TN (47.23 %). These results illustrate the effective application of the ternary nanocomposite in wastewater treatment.

Recent innovation and impacts of nano-based technologies for wastewater treatment on humans: a review

Sustainable wastewater management requires environment-friendly, efficient, and cost-effective methods of water treatment. The ever-growing list of emerging contaminants in municipal wastewater requires advanced, efficient, and cost-effective techniques for its treatment to combat the increasing water demand. The nano-based technologies hold great potential in improving water treatment efficiency and augmenting the water supply. However, the environmental effects of these technologies are still questionable among the public and scientific community. The present review discusses risks to human health due to the use of nano-based technology for the removal of emerging contaminants in water. The discussion will be about the impacts of these technologies on humans. Recommendations about safe and environmentally friendly options for nano-based technology for water treatment have been included. Safest options of nano-based technologies for water treatment and steps to minimize the risk associated with them have also been incorporated in this article. Since all biological systems are different, separate risk analyses should be performed at the environmentally relevant concentration for different durations. There is little/no information on the quantitative impact on humans and requires more understanding. The quantitative measurement of the cellular uptake of nanoparticles is usually difficult. We hope this article will serve its purpose for water researchers, medical researchers, environmentalists, policymakers, and the government.

Engineered Protein-Driven Synthesis of Tunable Iron Oxide Nanoparticles as T1 and T2 Magnetic Resonance Imaging Contrast Agents

Iron oxide nanoparticles (IONPs) have become one of the most promising nanomaterials for biomedical applications because of their biocompatibility and physicochemical properties. This study demonstrates the use of protein engineering as a novel approach to design scaffolds for the tunable synthesis of ultrasmall IONPs. Rationally designed proteins, containing different number of metal-coordination sites, were evaluated to control the size and the physicochemical and magnetic properties of a set of protein-stabilized IONPs (Prot-IONPs). Prot-IONPs, synthesized through an optimized coprecipitation approach, presented good T1 and T2 relaxivity values, stability, and biocompatibility, showing potential for magnetic resonance imaging (MRI) applications.

Functionalization of graphene nanostructures with inorganic nanoparticles and their use for the removal of pharmaceutical pollutants in water

Emerging pollutants such as pharmaceuticals are of special concern because despite their low environmental concentration, their biological activity can be intense, and they should be prevented to reach uncontrolledly to the environment. A graphene-based hybrid material decorated with Fe3O4 and TiO2 nanoparticles (NPs) has been prepared to effectively remove emerging pollutants as nonsteroidal anti-inflammatory drugs (NSAIDs) Ibuprofen and Diclofenac present in water at low environmental concentrations by a one-step functionalization process following a novel gentle and scalable surfactant depletion approach. Following this methodology, nanoparticles are progressively deprived of their original surfactant in the presence of graphene, leading to the formation of hybrid nanostructures composed of two different types of nanoparticles well dispersed over the graphene nanosheets. Ibuprofen and Diclofenac adsorption kinetics on the composites was investigated via UV-Vis spectroscopy. The as prepared hybrid material possesses high adsorption capacity, superparamagnetic properties, photocatalytic behavior, and good water dispersibility. Thanks to incorporating TiO2 nanoparticles as in situ catalysts, the adsorption performance of composites is restored after use, which could be a promising recycling pathway for the adsorbents in wastewater treatments.

Competitive adsorption of Alizarin Red S and Bromocresol Green from aqueous solutions using brookite TiO2 nanoparticles: experimental and molecular dynamics simulation

In this work, the effective adsorption and the subsequent photodegradation activity, of TiO₂ brookite nanoparticles, for the removal of anionic dyes, namely, Alizarin Red S (ARS) and Bromocresol Green (BCG) were studied. Batch adsorption experiments were conducted to investigate the effect of both dyes' concentration, contact time, and temperature. Photodegradation experiments for the adsorbed dyes were achieved using ultraviolet light illumination (6 W, λ = 365 nm). The single adsorption isotherms were fitted to the Sips model. The binary adsorption isotherms were fitted using the Extended-Sips model. The results of adsorption isotherms showed that the estimated maximum adsorption uptakes in the binary system were around 140 mg g^-1 and 45.5 mg g^-1 for ARS and BCG, respectively. In terms of adsorption kinetics, the uptake toward ARS was faster than BCG molecules in which the equilibrium was obtained in 7 min for ARS, while it took 180 min for BCG. Moreover, the thermodynamics results showed that the adsorption process was spontaneous for both anionic dyes. All these macroscopic competitive adsorption results indicate high selectivity toward ARS molecules in the presence of BCG molecules. Additionally, the TiO₂ nanoparticles were successfully regenerated using UV irradiation. Moreover, molecular dynamics computational modeling was performed to understand the molecules' optimum coordination, TiO₂ geometry, adsorption selectivity, and binary solution adsorption energies. The simulation energies distribution exhibits lower adsorption energies for ARS in the range from - 628 to - 1046 [Formula: see text] for both single and binary systems. In addition to that, the water adsorption energy was found to be between - 42 and - 209 [Formula: see text].

Palladium Decorated, Amine Functionalized Ni-, Cd- and Co-Ferrite Nanospheres as Novel and Effective Catalysts for 2,4-Dinitrotoluene Hydrogenation

2,4-diaminotoluene (TDA) is one of the most important polyurethane precursors produced in large quantities by the hydrogenation of 2,4-dinitrotoluene using catalysts. Any improvement during the catalysis reaction is therefore of significant importance. Separation of the catalysts by filtration is cumbersome and causes catalyst loss. To solve this problem, we have developed magnetizable, amine functionalized ferrite supported palladium catalysts. Cobalt ferrite (CoFe₂O₄-NH₂), nickel ferrite (NiFe₂O₄-NH₂), and cadmium ferrite (CdFe₂O₄-NH₂) magnetic catalyst supports were produced by a simple coprecipitation/sonochemical method. The nanospheres formed contain only magnetic (spinel) phases and show catalytic activity even without noble metals (palladium, platinum, rhodium, etc.) during the hydrogenation of 2,4-dinitrotoluene, 63% (n/n) conversion is also possible. By decorating the supports with palladium, almost 100% TDA selectivity and yield were ensured by using Pd/CoFe₂O₄-NH₂ and Pd/NiFe₂O₄-NH₂ catalysts. These catalysts possess highly favorable properties for industrial applications, such as easy separation from the reaction medium without loss by means of a magnetic field, enhanced reusability, and good dispersibility in aqueous medium. Contrary to non-functionalized supports, no significant leaching of precious metals could be detected even after four cycles.

Recent trends and advancements in nanoporous membranes for water purification

When it comes to electrocatalysis, the creation of nanodevices, the research of energy and the environment, and diagnostics, nanoporous materials are an asset. Nanoporous membranes, which can be used to filter water, have recently been the subject of new research and are summarized in this review. These membranes are used to remove salts and metallic ions from the water following an analysis of several nanoporous membrane types and production procedures. Demonstrations and discussions of these membrane systems are then conducted. Nanoporous membranes can be used to filter water, according to the conclusions of this study, which will help readers better grasp how they work. As a result, novel water purification nanoporous compounds that are easy to manufacture, inexpensive, and effective will be developed. Merits and demerits of nanoporous membrane for water treatment and its advancements in purification were discussed.

Photocatalytic activity of ZrO2/TiO2/Fe3O4 ternary nanocomposite for the degradation of naproxen: characterization and optimization using response surface methodology

In this study, ZrO₂, TiO₂, and Fe₃O₄ components were synthesized by co-precipitation, sol–gel, and co-precipitation methods, respectively. In addition, solid-state dispersion method was used for synthesizing of ZrO₂/TiO₂/Fe₃O₄ ternary nanocomposite. The ZrO₂/TiO₂/Fe₃O₄ nanocomposite was characterized by different techniques including XRD, EDX, SEM, BET, FTIR, XPS, EELS, and Photoluminescence (PL). The FTIR analysis of ZrO₂/TiO₂/Fe₃O₄ photocatalyst showed strong peaks in the range of 450 to 700 cm⁻¹, which represent stretching vibrations of Zr–O, Ti–O, and Fe–O. The results of FTIR and XRD, XPS analyses and PL spectra confirmed that the solid-state dispersion method produced ZrO₂/TiO₂/Fe₃O₄ nanocomposites. The EELS analysis confirmed the pure samples of Fe₃O₄, TiO₂ and ZrO₂. The EDAX analysis showed that the Zr:Ti:Fe atomic ratio was 0.42:2.08:1.00. The specific surface area, pores volume and average pores size of the photocatalyst were obtained 280 m²/g, 0.92 cm³/g, and 42 nm respectively. Furthermore, the performance of ZrO₂/TiO₂/Fe₃O₄ nanocomposite was evaluated for naproxen removal using the response surface method (RSM). The four parameters such as NPX concentration, time, pH and catalyst concentration was investigated. The point of zero charge of the photocatalyst was 6. The maximum and minimum degradation of naproxen using photocatalyst were 100% (under conditions: NPX concentration = 10 mg/L, time = 90 min, pH = 3 and catalyst concentration = 0.5 g/L) and 66.10% respectively. The stability experiment revealed that the ternary nanocatalyst demonstrates a relatively higher photocatalytic activity after 7 recycles.

Confining Nano-Fe3O4 in the Superhydrophilic Membrane Skin Layer to Minimize Internal Fouling

Membrane surface fouling is often reversible as it can be mitigated by enhancing the crossflow shear force. However, membrane internal fouling is often irreversible and thus more challenging. In this study, we developed a new superhydrophilic poly(vinylidene fluoride) (P-PVDF) membrane confined with nano-Fe₃O₄ in the top skin layer via reverse filtration to reduce internal fouling. The surface of the P-PVDF membrane confined with nano-Fe₃O₄ had superwetting properties (water contact angle reaching 0° within 1 s), increased roughness (from 182 to 239 nm), and enhanced water affinity. The Fe₃O₄@P-PVDF membrane surface showed a thicker and enhanced hydration layer, which prevented foulants from approaching membrane surfaces and pores, thereby improving the rejection. For example, when 50 ppm humic acid (HA) solution was used as the feed, the removal efficiency of the Fe₃O₄@P-PVDF membrane was ∼67%, while the HA removal of the P-PVDF membrane was only ∼20%. The results from the resistance-in-series model showed that nanoconfinement of Fe₃O₄ in the top skin layer of the membrane allowed foulants to accumulate on the membrane surface (i.e., surface fouling) rather than within the internal pores (i.e., internal fouling). The filtration results under crossflow fouling and cleaning confirmed that the Fe₃O₄@P-PVDF membrane had higher surface fouling but it was much more reversible and much lower internal fouling compared with the control membrane. Our fouling analysis offers new insights into mass transfer mechanisms of the membrane with a nanoconfinement-enhanced hydration layer. This study provides an effective strategy to develop membranes with low internal fouling propensities.

Hydrogels and Hydrogel Nanocomposites: Enhancing Healthcare through Human and Environmental Treatment

Humans are constantly exposed to exogenous chemicals throughout their life, which can lead to a multitude of negative health impacts. Advanced materials can play a key role in preventing or mitigating these impacts through a wide variety of applications. The tunable properties of hydrogels and hydrogel nanocomposites (e.g., swelling behavior, biocompatibility, stimuli responsiveness, functionality, etc.) have deemed them ideal platforms for removal of environmental contaminants, detoxification, and reduction of body burden from exogenous chemical exposures for prevention of disease initiation, and advanced treatment of chronic diseases, including cancer, diabetes, and cardiovascular disease. In this review, three main junctures where the use of hydrogel and hydrogel nanocomposite materials can intervene to positively impact human health are highlighted: 1) preventing exposures to environmental contaminants, 2) prophylactic treatments to prevent chronic disease initiation, and 3) treating chronic diseases after they have developed.

Dispersive solid phase extraction based on reduced graphene oxide modified Fe3O4 nanocomposite for trace determination of parabens in rock, soil, moss, seaweed, feces, and water samples from Horseshoe and Faure Islands

This study reports an efficient, green, sensitive and simple analytical protocol for trace determination of methyl paraben, ethyl paraben, propyl paraben, butylparaben and benzyl paraben by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The analytes were preconcentrated using an ultrasonication supported (US) dispersive solid phase extraction (DSPE) method based on reduced graphene oxide (rGO) modified iron nanoparticles (US-Fe₃O₄@rGO-DSPE). A reversed-phase C18 column and an isocratic elution program comprising of 20 mM phosphate buffer (pH 4.50) and acetonitrile(58:42, v/v) were used to elute and separate the analytes for detection. The limits of detection determined for the analytes were very low and were in the range of 0.02 - 0.16 ng mL^-1. The coefficients of determination obtained for the analytes ranged from 0.9973 to 0.9998, and this validated good linearity of the method.Percent relative standard deviations obtained in the range of 2.5 - 10.6% verified the method's high intraday repeatability. Accuracy of the proposed method was assessed with spiking experiments performed on complex sample matrices. Percent recoveries calculated for spiked soil, artificial seawater and seaweed samples were in acceptable ranges of 95 - 121%, 87 - 117% and 85 - 111%, respectively. These figures of merit suggest that HPLC-UV coupled with the US-Fe₃O₄@rGO-DSPEmethod is suitable for the determination of parabens in Antarctic samples.

Photosynthetic bacteria with iron oxide nanoparticles as catalyst for cooking oil removal and valuable products recovery with heavy metal co-contamination

Waste cooking oil discharge causes environmental pollution in receiving waters, particularly when associated with heavy metals that can lead to formation of hazardous organometallic compounds. This study combined iron oxide nanomaterial and the anoxygenic photosynthetic bacterium Rhodopseudomonas faecalis PA2 for removal of cooking oil in the presence of heavy metals. R. faecalis PA2, with known capability to generate beneficial substances from several wastes, was capable of cooking oil removal with production of valuable products. Oil removal, biomass, protein, and carotenoid production were 82.38%, 1.48 g/L, 1,600.19 mg/L, and 1,046.33 mg/L, respectively, under optimal conditions (cooking oil as carbon source and 30% inoculum density). Iron (Fe) stimulates growth of R. faecalis; in this study, Fe₃O₄ nanoparticles were synthesized and used as a catalyst to facilitate interaction and high reactivity between Fe and R. faecalis PA2. Size measurement by transmission electron microscopy (17.44 nm), X-ray diffraction peaks, and magnetic susceptibility confirmed that the synthesized nanoparticles were magnetite Fe₃O₄. Biomass, protein, and carotenoid production of the Fe₃O₄ supplemented experiment increased by 61.56%, 70.78%, and 57.2%, respectively, when compared with the control. When different concentrations of heavy metals (Pb, Ni, Co, and Zn) were supplemented in the media containing cooking oil, Fe₃O₄ addition increased heavy metal tolerance, improved bacterial growth, and enhanced valuable products when compared with the non-supplemented group. This study reports the positive impact of nanoparticle application as a catalyst for valorization of cooking oil waste with heavy metal co-contamination by the photosynthetic bacterium R. faecalis PA2.

Bioremediation and decontamination potentials of metallic nanoparticles loaded nanohybrid matrices - A review

The current nanotechnological advancements provide an astonishing insight to fabricate nanomaterials for nano-bioremediation purposes. Exciting characteristics possessed by hybrid matrices at the nanoscale knock endless opportunities to nano-remediate environmentally-related pollunanomaterials tants of emerging concern. Nanometals are considered among the oldest generation of the world has ever noticed. These tiny nanometals and nanometal oxides showed enormous potential in almost every extent of industrial and biotechnological domains, including their potential multipurpose approach to deal with water impurities. In this manuscript, we discussed their role in the diversity of water treatment technologies used to remove bacteria, viruses, heavy metals, pesticides, and organic impurities, providing an ample perspective on their recent advances in terms of their characteristics, attachment strategies, performance, and their scale-up challenges. Finally, we tried to explore their futuristic contribution to nano-remediate environmentally-related pollutants of emerging concern aiming to collect treated yet safe water that can be reused for multipurpose.

Magnetic Adsorbents for Wastewater Treatment: Advancements in Their Synthesis Methods

The remediation of water streams, polluted by various substances, is important for realizing a sustainable future. Magnetic adsorbents are promising materials for wastewater treatment. Although numerous techniques have been developed for the preparation of magnetic adsorbents, with effective adsorption performance, reviews that focus on the synthesis methods of magnetic adsorbents for wastewater treatment and their material structures have not been reported. In this review, advancements in the synthesis methods of magnetic adsorbents for the removal of substances from water streams has been comprehensively summarized and discussed. Generally, the synthesis methods are categorized into five groups, as follows: direct use of magnetic particles as adsorbents, attachment of pre-prepared adsorbents and pre-prepared magnetic particles, synthesis of magnetic particles on pre-prepared adsorbents, synthesis of adsorbents on preprepared magnetic particles, and co-synthesis of adsorbents and magnetic particles. The main improvements in the advanced methods involved making the conventional synthesis a less energy intensive, more efficient, and simpler process, while maintaining or increasing the adsorption performance. The key challenges, such as the enhancement of the adsorption performance of materials and the design of sophisticated material structures, are discussed as well.

Toxicity of Modified Magnetite-Based Nanocomposites Used for Wastewater Treatment and Evaluated on Zebrafish (Danio rerio) Model

Magnetite-based nanocomposites are used for biomedical, industrial, and environmental applications. In this study, we evaluated their effects on survival, malformation, reproduction, and behavior in a zebrafish animal model. Nanoparticles were synthesized by chemical coprecipitation and were surface-functionalized with (3-aminopropyl) triethoxysilane (APTES), L-cysteine (Cys), and 3-(triethoxysilyl) propylsuccinic anhydride (CAS). All these nanocomposites were designed for the treatment of wastewater. Zebrafish embryos at 8 h post-fertilization (hpf) and larvae at 4 days post-fertilization (dpf) were exposed to the magnetic nanocomposites Fe3O4 MNP (magnetite), MNP+APTES, MNP+Cys, MNP+APTES+Cys, and MNP+CAS, at concentrations of 1, 10, 100, and 1000 µg/mL. Zebrafish were observed until 13 dpf, registering daily hatching, survival, and malformations. Behavior was tested at 10 dpf for larvae, and reproduction was analyzed later in adulthood. The results showed that the toxicity of the nanocomposites used were relatively low. Exploratory behavior tests showed no significant changes. Reproduction in adults treated during development was not affected, even at concentrations above the OECD recommendation. Given the slight effects observed so far, these results suggest that nanocomposites at the concentrations evaluated here could be a viable alternative for water remediation because they do not affect the long-term survival and welfare of the animals.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

Recent advancements of g-C3N4-based magnetic photocatalysts towards the degradation of organic pollutants: a review

Heterogeneous photocatalysis premised on advanced oxidation processes has witnessed a broad application perspective, including water purification and environmental remediation. In particular, the graphitic carbon nitride (g-C₃N₄), an earth-abundant metal-free conjugated polymer, has acquired extensive application scope and interdisciplinary consideration owing to its outstanding structural and physicochemical properties. However, several issues such as the high recombination rate of the photo-generated electron-hole pairs, smaller specific surface area, and lower electrical conductivity curtail the catalytic efficacy of bulk g-C₃N₄. Another challenging task is separating the catalyst from the reaction medium, limiting their reusability and practical applications. Therefore, several methodologies are adopted strategically to tackle these issues. Attention is being paid, especially to the magnetic nanocomposites (NCs) based catalysts to enhance efficiency and proficient reusability property. This review summarizes the latest progress related to the design and development of magnetic g-C₃N₄-based NCs and their utilization in photocatalytic systems. The usefulness of the semiconductor heterojunctions on the catalytic activity, working mechanism, and degradation of pollutants are discussed in detail. The major challenges and prospects of using magnetic g-C₃N₄-based NCs for photocatalytic applications are highlighted in this report.

Dynamic green synthesis of iron oxide and manganese oxide nanoparticles and their cogent antimicrobial, environmental and electrical applications

The scientific community is inclined towards addressing environmental and energy concerns through sustainable means. Conventional processes such as chemical synthesis, involve the usage of environmentally harmful ligands and high tech facilities, which are time-consuming, expensive, energy-intensive, and require extreme conditions for synthesis. Plant-based synthesis is valuable and sustainable for the ecosystem. The use of plant-based precursors for nanoparticle synthesis eliminates the menace of toxic waste contamination. The present review elucidates that the plant based synthesized iron oxide and manganese oxide nanoparticles have tremendous and exceptional applications in various fields such as antimicrobial and antioxidative domains, environmental, electrical and sensing properties. Hence, the literature reviewed explains that plant based synthesis of nanoparticles is an adept and preferred technique. These important transition oxide metal nanoparticles have great applicability in ecological, environmental science as well as electrochemistry and sensing technology. Both these metal oxides display a stable and adaptable nature, which can be functionalized for a specific application, thus exhibiting great potential for efficiency. The current review epitomizes all the latest reported work on the synthesis of iron and manganese oxide nanoparticles through a greener approach along with explaining various significant applications keeping in view the concept of sustainability.

Amido-Functionalized Magnetic Metal-Organic Frameworks Adsorbent for the Removal of Bisphenol A and Tetracycline

In this paper, amido-functionalized MOFs with core/shell magnetic particles (Fe₃O₄@MIL-53(Al)-NH₂) was prepared by the solvothermal method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), Vibrating Sample Magnetometer (VSM) and UV/VIS spectrophotometer. The influence of different factors on the adsorption effect of the pollutant, including adsorbent amounts, adsorption time, ionic strength and pH, were explored. It was found that the amine-decorated Fe₃O₄@MIL-53(Al)-NH₂ were efficient for removal of contaminant, with the adsorption capacity for bisphenol A (234.1 mg/g) and tetracycline (84.8 mg/g) under the optimized conditions. The adsorption kinetics and the equilibrium adsorption data indicated that the adsorption process of BPA and TC was more compatible with the pseudo-second-order kinetic model and the Langmuir model, respectively. The thermodynamic values show the adsorption of the mentioned contaminant was spontaneous and endothermic. Moreover, the Fe₃O₄@MIL-53(Al)-NH₂ adsorbent had good regeneration and reusability capacity after five cyclic utilization. All these results show Fe₃O₄@MIL-53(Al)-NH₂ adsorbent could be a potential candidate for future water purification.

Effect of magnetic field on nano-magnetite composite exhibits in ion-adsorption

Nano-magnetites are widely researched for its potential as an excellent adsorbent in many applications. However, the efficiency of the nano-magnetites are hindered by their tendency to agglomerate. In this work, we dispersed and embedded the nano-magnetites in a porous silica gel matrix to form a nanocomposite to reduce the extent of agglomeration and to enhance the adsorption performance. Our experimental results showed that the removal efficiency of Cu²⁺ ion has improved by 46% (22.4 ± 2.2%) on the nano-magnetite-silica-gel (NMSG) nanocomposite as compared to pure nano-magnetites (15.3 ± 0.6%). The adsorption capacity is further enhanced by 39% (from 11.2 ± 1.1 to 15.6 ± 1.6 mg/g) by subjecting the NMSG to a magnetic field prior to adsorption. We infer that the magnetic field aligned the magnetic domains within the nano-magnetites, resulting in an increased Lorentz force during adsorption. Similar alignment of magnetic domains is near to impossible in pure nano-magnetites due to severe agglomeration. We further found that the adsorption capacity of the NMSG can be manipulated with an external magnetic field by varying the strength and the configurations of the field. Equipped with proper process design, our finding has great potentials in processes that involve ion-adsorptions, for example, NMSG can: (i) replace/reduce chemical dosing in controlling adsorption kinetics, (ii) replace/reduce complex chemicals required in ion-chromatography columns, and (iii) reduce wastage of nano-adsorbents by immobilizing it in a porous matrix.

Preparation of magnetized iron oxide grafted on graphene oxide for hyperthermia application

Magnetic hyperthermia therapy (MHT) is a highly promising therapeutic modality for the treatment of different kinds of cancers and malignant tumors. The therapy is based on the concept that; iron oxide nanoparticles deposited at cancer sites can generate heat when exposed to an alternating current magnetic field or near infrared radiation and consequently destroying only the cancer cells by exploiting their vulnerability to heat. The fact that the treatment is at molecular level and that iron oxide nanoparticles provide more guided focus heating justifies its efficacy over treatment such as surgery, radiation therapy and chemotherapy. Nevertheless, the spread of MHT as the next-generation therapeutics has been shadowed by insufficient heating especially at the in vivo stage. This can be averted by modifying the iron oxide nanoparticle structure. To this end, various attempts have been made by developing a magnetic hybrid nanostructure capable of generating efficient heat. However, the synthesis method for each component (of the magnetic hybrid nanostructure) and the grafting process is now an issue. This has a direct effect on the performance of the magnetic hybrid nanostructure in MHT and other applications. The main objective of this review is to detail out the different materials, methods and characterization techniques that have been used so far in developing magnetic hybrid nanostructure. In view of this, we conducted a comprehensive review and present a road map for developing a magnetic hybrid nanostructure that is capable of generating optimum heat during MHT. We further summarize the various characterization techniques and necessary parameters to study in validating the efficiency of the magnetic hybrid nanostructure. Hopefully, this contribution will serve as a guide to researchers that are willing to evaluate the properties of their magnetic hybrid nanostructure.

Highly efficient and fast removal of colored pollutants from single and binary systems, using magnetic mesoporous silica

Magnetic mesoporous silica material was tested as adsorbent for removal of two usual colored compounds present in industrial wastewater. The magnetic mesoporous silica was synthesized by modified sol-gel method and characterized from the morpho-textural, structural and magnetic point of view. The specific surface area and the total pore volume indicate a good adsorption capacity of the material, and the obtained saturation magnetization strength value denotes a good magnetic separation from solution. The adsorption capacity of magnetic mesoporous silica increases with the increase of the initial dye concentration, and the removal efficiency of the dyes was dependent on the pH of the solution and decreased with increasing temperature. The pseudo-second-order kinetic model described best the adsorption mechanism, and the maximum adsorption capacities were determined from the Sips isotherm model, being 88.29 mg/g for Congo Red and 208.31 mg/g for Methylene Blue. A complete thermodynamic evaluation was performed, by determining the free energy, enthalpy and entropy, and the result showed a spontaneous and exothermic adsorption process. The recovery and reutilization of the adsorbent were estimated in five cycles of adsorption-desorption, and the results indicated a good stability and reusability of magnetic mesoporous silica. The new magnetic mesoporous silica can be easily separated from solution, via an external magnetic field, and may be effectively applied as adsorbent for elimination of dyes from colored polluted waters.

Silk Polymers and Nanoparticles: A Powerful Combination for the Design of Versatile Biomaterials

Silk fibroin (SF) is a natural protein largely used in the textile industry but also in biomedicine, catalysis, and other materials applications. SF is biocompatible, biodegradable, and possesses high tensile strength. Moreover, it is a versatile compound that can be formed into different materials at the macro, micro- and nano-scales, such as nanofibers, nanoparticles, hydrogels, microspheres, and other formats. Silk can be further integrated into emerging and promising additive manufacturing techniques like bioprinting, stereolithography or digital light processing 3D printing. As such, the development of methodologies for the functionalization of silk materials provide added value. Inorganic nanoparticles (INPs) have interesting and unexpected properties differing from bulk materials. These properties include better catalysis efficiency (better surface/volume ratio and consequently decreased quantify of catalyst), antibacterial activity, fluorescence properties, and UV-radiation protection or superparamagnetic behavior depending on the metal used. Given the promising results and performance of INPs, their use in many different procedures has been growing. Therefore, combining the useful properties of silk fibroin materials with those from INPs is increasingly relevant in many applications. Two main methodologies have been used in the literature to form silk-based bionanocomposites: in situ synthesis of INPs in silk materials, or the addition of preformed INPs to silk materials. This work presents an overview of current silk nanocomposites developed by these two main methodologies. An evaluation of overall INP characteristics and their distribution within the material is presented for each approach. Finally, an outlook is provided about the potential applications of these resultant nanocomposite materials.

Green Synthesis, Characterization and Application of Natural Product Coated Magnetite Nanoparticles for Wastewater Treatment

Adsorption of organic pollutants, toxic metal ions, and removal of harmful bacteria can give us clean and pure drinkable water from wastewater resources. Respective magnetite nanoparticles (MNPs) were synthesized using a cheaper and greener way in an open-air environment with the use of crude latex of Jatropha curcas (JC) and leaf extract of Cinnamomum tamala (CT). Characterization of MNPs had been performed by dynamic light scattering (DLS), Ultraviolet-visible (UV-vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, powdered X-ray diffraction (XRD), and field emission scanning electron microscope (FE-SEM). The size ranges of the synthesized MNPs were observed in between 20-42 nm for JC-Fe₃O₄ and within 26-35 nm for CT-Fe₃O₄ by FE-SEM images. The effect of synthesized magnetic nanoparticles in wastewater treatment (bacterial portion), dye adsorption, toxic metal removal as well as antibacterial, antioxidant, and cytotoxic activities were studied. This purification will lead to an increase in the resources of pure drinking water in the future.

Liquid-Phase Synthesis of Iron Oxide Nanostructured Materials and Their Applications

Owing to their high natural abundance, low cost, easy availability, and excellent magnetic properties, considerable interest has been devoted to the synthesis and applications of iron oxide nanostructured materials. Liquid-phase synthesis methods are economical and environmentally friendly with low energy consumption and volatile emissions, and as such have received much attention for the preparation of iron oxide nanostructured materials. Herein, the liquid-phase synthesis methods of iron oxide nanostructured materials including the co-precipitation method, microemulsion method, conventional hydrothermal and solvothermal methods, microwave-assisted heating method, sonolysis method, and other methods are summarized and reviewed. Many iron oxide nanostructured materials, self-assembled nanostructures, and nanocomposites have been successfully prepared, which are of great significance to enhance their structure-dependent properties and applications. The specific roles of liquid-phase chemical reaction parameters in regulating the chemical composition, structure, crystallinity, morphology, particle size, and dispersive behavior of the as-prepared iron oxide nanostructured materials are emphasized. The biomedical, environmental, and electrochemical energy storage applications of iron oxide nanostructured materials are discussed. Finally, challenges and perspectives are proposed for future investigations on the liquid-phase synthesis and applications of iron oxide nanostructured materials.

Multifunctional temperature-responsive polymers as advanced biomaterials and beyond

The versatility and applicability of thermoresponsive polymeric systems have led to great interest and a multitude of publications. Of particular significance, multifunctional poly(N-isopropylacrylamide) (PNIPAAm) systems based on PNIPAAm copolymerized with various functional comonomers or based on PNIPAAm combined with nanomaterials exhibiting unique properties. These multifunctional PNIPAAm systems have revolutionized several biomedical fields such as controlled drug delivery, tissue engineering, self-healing materials, and beyond (e.g., environmental treatment applications). Here, we review these multifunctional PNIPAAm-based systems with various cofunctionalities, as well as highlight their unique applications. For instance, addition of hydrophilic or hydrophobic comonomers can allow for polymer lower critical solution temperature modification, which is especially helpful for physiological applications. Natural comonomers with desirable functionalities have also drawn significant attention as pressure surmounts to develop greener, more sustainable materials. Typically, these systems also tend to be more biocompatible and biodegradable and can be advantageous for use in biopharmaceutical and environmental applications. PNIPAAm-based polymeric nanocomposites are reviewed as well, where incorporation of inorganic or carbon nanomaterials creates synergistic systems that tend to be more robust and widely applicable than the individual components.

Insight into the removal process mechanism of pharmaceutical compounds and dyes on plasma-modified biomass: the key role of adsorbate specificity

The reason that some molecules, but not others, are easily adsorbed was not fully understood. In order to spotlight the effect of morphological structure and surface functional composition of adsorbate rather than focusing only on the nature of adsorbent as in most of literature reports, this work reports the biosorption of two dyes (anionic Orange G and cationic malachite green) and two pharmaceuticals (Ibuprofen and ampicillin) as target representative contaminants onto plasma-modified cocoa shell (CPHP) used as alternative low-cost adsorbent. As results, when molecules were mixed in solution and then exposed to a substrate, the factors that affect adsorption include the relative solvation of the adsorbates, the ability of each molecule to adhere to the surface, and the degree of interaction between the molecules once they were adsorbed. The maximum adsorbed amounts at 298 K of OG, MG, IBP, and AMP were 23.96, 14.65, 13.99, and 06.66 mg/g, respectively. The most solvated molecules may not adsorb rapidly to the surface, while comparatively, the less soluble molecules will aggregate, so as to maximize self-interactions via Van der Waals, hydrogen bonds or other interactions. This work demonstrated that the adsorbate intrinsic properties could play a significant role in the adsorption process. Hence, properties such as functional active groups, dimensions, and hydrophobicity were the determining parameters in the adsorption process mechanism. Accordingly, the pharmaceuticals biosorption mechanism involved π-π bonding, hydrophobic effect, electrostatic interaction, and van der Waals forces whereas the dye biosorption mechanism was dominated as well known by electrostatic attraction and hydrogen bonding phenomenon. Experimental parameters such as initial pH of solution and contact time were optimized. The optimum pH values were 2.0 for ibuprofen (IBP) and 7.0 for ampicillin (AMP). The kinetics of adsorption and the experimental isotherms data were analyzed using non-linear models. Results indicated that Avrami fractional order was the most successfully fitted model for pharmaceutical biosorption and based on the statistical values of SD and R²_adj parameters, Liu isotherm was the most successfully fitted model.

The Role of New Inorganic Materials in Composite Membranes for Water Disinfection

Today, there is an increasing interest in improving the physicochemical properties of polymeric membranes by merging the membranes with different inorganic materials. These so-called composite membranes have been implemented in different membrane-based technologies (e.g., microfiltration, ultrafiltration, nanofiltration, membrane bioreactors, among others) for water treatment and disinfection. This is because such inorganic materials (such as TiO2-, ZnO-, Ag-, and Cu-based nanoparticles, carbon-based materials, to mention just a few) can improve the separation performance of membranes and also some other properties, such as antifouling, mechanical, thermal, and physical and chemical stability. Moreover, such materials display specific biological activity towards viruses, bacteria, and protozoa, showing enhanced water disinfection properties. Therefore, the aim of this review is to collect the latest advances (in the last five years) in using composite membranes and new hybrid materials for water disinfection, paying particular emphasis on relevant results and new hydride composites together with their preparation protocols. Moreover, this review addresses the main mechanism of action of different conventional and novel inorganic materials toward biologically active matter.

Iron Magnetic Nanoparticle-Induced ROS Generation from Catechol-Containing Microgel for Environmental and Biomedical Applications

Reactive oxygen species (ROS) can degrade organic compounds and function as a broad-spectrum disinfectant. Here, dopamine methacrylamide (DMA) was used to prepare catechol-containing microgels, which can release ROS via metal-catechol interaction. A combination of the microgel and iron magnetic nanoparticle (FeMNP) significantly reduced the concentration of four organic dyes (Alizarin Red S, Rhodamine B, Crystal Violet, and Malachite Green) and an antibiotic drug, ciprofloxacin, dissolved in solution. Degradation of dye occurred across a wide range of pH levels (pH 3-9). This simple combination was also antimicrobial against both Escherichia coli and Staphylococcus aureus. Electron paramagnetic resonance spectroscopy (EPR) results indicate that singlet oxygen was generated during the reaction between catechol and FeMNP at both pH 3 and 7.4, which was responsible for the degradation of organic compounds and bactericidal features of the microgel. Unlike autoxidation that only occurs at a neutral to basic pH, FeMNP-induced catechol oxidation generated singlet oxygen over a wide range of pH level. Additionally, catechol chelates heavy metal ions, resulting in their removal from solution and repurposed these metal ions for dye degradation. This multifunctional microgel can potentially be used for environmental applications for the removal of organic pollutants and heavy metal ions from wastewater, as well as reducing bacterial infection in biomedical applications.

Water Decontamination with Magnetic Particles by Adsorption and Chemical Degradation. Influence of the Manufacturing Parameters

Many different processes for manufacturing of magnetic particles are present in scientific literature. However, the large majority are not able to be applied to large-scale real operations. In this study, we present an experiment undertaken to determine advisable values and options for the main variables and factors for the application of the reverse co-precipitation method to produce magnetic particles for real environmental applications. In such, we have tried a conjugation of values/factors that has led to 12 main experiments and production of 12 different particles. After an initial study concerning their main characteristics, these 12 different particles were applied for the sorption removal of COD from real wastewater samples (efficiencies between 70% and 81%) and degradation of Methylene blue by Fenton reaction (degradation efficiencies up to 100%). The main conclusion from this work is that the best set of values depends on the target environmental application, and this set of values were determined for the two applications studied.