Overview of the Main Disinfection Processes for Wastewater and Drinking Water Treatment Plants

Comprehensive assessment of chlorination disinfection on microplastic-associated biofilms

Chlorination on microplastic (MP) biofilms was comprehensively investigated with respect to disinfection efficiency, morphology, and core microbiome. The experiments were performed under various conditions: i) MP particles; polypropylene (PP) and polystyrene (PS), ii) MP biofilms; Escherichia coli for single-species and river water microorganisms for multiple-species, iii) different chlorine concentrations, and iv) different chlorine exposure periods. As a result, chlorination effectively inactivated the MP biofilm microorganisms. The disinfection efficiency increased with increasing the free chlorination concentration and exposure periods for both single- and multiple-species MP biofilms. The multiple-species MP biofilms were inactivated 1.3-6.0 times less than single-species MP biofilms. In addition, the PP-MP biofilms were more vulnerable to chlorination than the PS-MP biofilms. Morphology analysis verified that chlorination detached most MP biofilms, while a small part still remained. Interestingly, chlorination strongly changed the biofilm microbiome on MPs; the relative abundance of some microbes increased after the chlorination, suggesting they could be regarded as chlorine-resistant bacteria. Some potential pathogens were also remained on the MP particles after the chlorination. Notably, chlorination was effective in inactivating the MP biofilms. Further research should be performed to evaluate the impacts of residual MP biofilms on the environment.

Viruses in Wastewater-A Concern for Public Health and the Environment

Wastewater monitoring provides essential information about water quality and the degree of contamination. Monitoring these waters helps identify and manage risks to public health, prevent the spread of disease, and protect the environment. Standardizing the appropriate and most accurate methods for the isolation and identification of viruses in wastewater is necessary. This review aims to present the major classes of viruses in wastewater, as well as the methods of concentration, isolation, and identification of viruses in wastewater to assess public health risks and implement corrective measures to prevent and control viral infections. Last but not least, we propose to evaluate the current strategies in wastewater treatment as well as new alternative methods of water disinfection.

Service Life of Pre-Tensioned Concrete Structures in a Chloride Environment on the Example of an Aluminium Foundry Building

This paper describes a study of the chloride content in the concrete lagging of prestressed concrete elements of the roof structure of an aluminium foundry building. Sources of chloride pollution in industrial facilities are discussed. Methods for collecting dust deposited on the structure and sampling concrete for chloride concentration testing are presented in detail. The test methods used and the apparatus used to assess the chloride content at the thickness of concrete reinforcement lagging are presented. Investigations of the chloride content in the concrete of the reinforcement cover showed a very high concentration of chloride in the near-surface layer, depending on the location of the element in relation to the source of chloride emission into the environment. In contrast, the concrete of the deeper layers of the lagging contained very small amounts of Cl- chlorides. The results of the chloride content of the lagging concrete were plotted against the distance from the surface of the specimen and approximated by the function C(x,t) based on Fick's second law and its solution. A satisfactory fit of the course of this function to the experimental results was obtained. Based on the obtained C(x,t) function, the durability of the main structural components of an aluminium foundry industrial hall operating in a chloride environment was estimated.

Where the rubber meets the road: Emerging environmental impacts of tire wear particles and their chemical cocktails

About 3 billion new tires are produced each year and about 800 million tires become waste annually. Global dependence upon tires produced from natural rubber and petroleum-based compounds represents a persistent and complex environmental problem with only partial and often-times, ineffective solutions. Tire emissions may be in the form of whole tires, tire particles, and chemical compounds, each of which is transported through various atmospheric, terrestrial, and aquatic routes in the natural and built environments. Production and use of tires generates multiple heavy metals, plastics, PAH's, and other compounds that can be toxic alone or as chemical cocktails. Used tires require storage space, are energy intensive to recycle, and generally have few post-wear uses that are not also potential sources of pollutants (e.g., crumb rubber, pavements, burning). Tire particles emitted during use are a major component of microplastics in urban runoff and a source of unique and highly potent toxic substances. Thus, tires represent a ubiquitous and complex pollutant that requires a comprehensive examination to develop effective management and remediation. We approach the issue of tire pollution holistically by examining the life cycle of tires across production, emissions, recycling, and disposal. In this paper, we synthesize recent research and data about the environmental and human health risks associated with the production, use, and disposal of tires and discuss gaps in our knowledge about fate and transport, as well as the toxicology of tire particles and chemical leachates. We examine potential management and remediation approaches for addressing exposure risks across the life cycle of tires. We consider tires as pollutants across three levels: tires in their whole state, as particulates, and as a mixture of chemical cocktails. Finally, we discuss information gaps in our understanding of tires as a pollutant and outline key questions to improve our knowledge and ability to manage and remediate tire pollution.

Mucolytic Drugs Ambroxol and Bromhexine: Transformation under Aqueous Chlorination Conditions

Bromhexine and ambroxol are among the mucolytic drugs most widely used to treat acute and chronic respiratory diseases. Entering the municipal wastewater and undergoing transformations during disinfection with active chlorine, these compounds can produce nitrogen- and bromine-containing disinfection by-products (DBPs) that are dangerous for aquatic ecosystems. In the present study, primary and deep degradation products of ambroxol and bromhexine obtained in model aquatic chlorination experiments were studied via the combination of high-performance liquid and gas chromatography with high-resolution mass spectrometry. It was shown that at the initial stages, the reactions of cyclization, hydroxylation, chlorination, electrophilic ipso-substitution of bromine atoms with chlorine, and oxidative N-dealkylation occur. Along with known metabolites, a number of novel primary DBPs were tentatively identified based on their elemental compositions and tandem mass spectra. Deep degradation of bromhexine and ambroxol gives twenty-four identified volatile and semi-volatile compounds of six classes, among which trihalomethanes account for more than 50%. The specific class of bromhexine- and ambroxol-related DBPs are bromine-containing haloanilines. Seven of them, including methoxy derivatives, were first discovered in the present study. One more novel class of DBPs associated with bromhexine and ambroxol is represented by halogenated indazoles formed through dealkylation of the primary transformation products containing pyrazoline or tetrahydropyrimidine cycle in their structure.

A unit process log reduction database for water reuse practitioners

Pathogen reduction for the purpose of human health protection is a critical function provided by water reuse systems. Pathogen reduction performance potential is dependent on a wide range of design and operational parameters. Poor understanding of pathogen reduction performance has important consequences-under treatment can jeopardize human health, while over treatment can lead to unnecessary costs and environmental impacts. Documented pathogen reduction potential of the unit processes that make up water reuse treatment trains is based on a highly dispersed and unstructured literature, creating an impediment to practitioners looking to design, model or simply better understand these systems. This review presents a database of compiled log reduction values (LRVs) and log reduction credits (LRCs) for unit processes capable of providing some level of pathogen reduction, with a focus on processes suitable for onsite non-potable water reuse systems. Where reported, we have also compiled all relevant design and operational factors associated with the LRVs and LRCs. Overall, we compiled over 1100 individual LRV data entries for 31 unit processes, and LRCs for 8 unit processes. Results show very inconsistent reporting of influencing parameters, representing a limitation to the use of some of the data. As a standalone resource, the database (included as Supplemental Information) provides water reuse practitioners with easy access to LRV and LRC data. The database is also part of a longer-term effort to optimize the balance between human health protection, potential environmental impacts and cost of water reuse treatment trains.

Chlorination of Aromatic Amino Acids: Elucidating Disinfection Byproducts, Reaction Kinetics, and Influence Factors

In the face of ongoing water pollution challenges, the intricate interplay between dissolved organic matter and disinfectants like chlorine gives rise to potentially harmful disinfection byproducts (DBPs) during water treatment. The exploration of DBP formation originating from amino acids (AA) is a critical focus of global research. Aromatic DBPs, in particular, have garnered considerable attention due to their markedly higher toxicity compared to their aliphatic counterparts. This work seeks to advance the understanding of DBP formation by investigating chlorination disinfection and kinetics using tyrosine (Tyr), phenylalanine (Phe), and tryptophan (Trp) as precursors. Via rigorous experiments, a total of 15 distinct DBPs with accurate molecular structures were successfully identified. The chlorination of all three AAs yielded highly toxic chlorophenylacetonitriles (CPANs), and the disinfectant dosage and pH value of the reaction system potentially influence chlorination kinetics. Notably, Phe exhibited the highest degradation rate compared to Tyr and Trp, at both the CAA:CHOCl ratio of within 1:2 and a wide pH range (6.0 to 9.0). Additionally, a neutral pH environment triggered the maximal reaction rates of the three AAs, while an acidic condition may reduce their reactivity. Overall, this study aims to augment the DBP database and foster a deeper comprehension of the DBP formation and relevant kinetics underlying the chlorination of aromatic AAs.

Remediation of multifarious metal ions and molecular docking assessment for pathogenic microbe disinfection in aqueous solution by waste-derived Ca-MOF

The present study demonstrates an eco-friendly and cost-effective synthesis of calcium terephthalate metal-organic frameworks (Ca-MOF). The Ca-MOF were composed of metal ions (Ca2+) and organic ligands (terephthalic acid; TPA); the former was obtained from egg shells, and the latter was obtained from processing waste plastic bottles. Detailed characterization using standard techniques confirmed the synthesis of Ca-MOF with an average particle size of 461.9 ± 15 nm. The synthesized Ca-MOF was screened for its ability to remove multiple metal ions from an aqueous solution. Based on the maximum sorption capacity, Pb2+, Cd2+, and Cu2+ ions were selected for individual parametric batch studies. The obtained results were interpreted using standard isotherms and kinetic models. The maximum sorption capacity (qm) obtained from the Langmuir model was found to be 644.07 ± 47, 391.4 ± 26, and 260.5 ± 14 mg g-1 for Pb2+, Cd2+, and Cu2+, respectively. Moreover, Ca-MOF also showed an excellent ability to remove all three metal ions simultaneously from a mixed solution. The metal nodes and bonded TPA from Ca-MOF were dissociated by the acid dissolution method, which protonated and isolated TPA for reuse. Further, the crystal structure of Ca-MOF was prepared and docked with protein targets of selected pathogenic water-borne microbes, which showed its disinfection potential. Overall, multiple metal sorption capability, regeneration studies, and broad-spectrum antimicrobial activity confirmed the versatility of synthesized Ca-MOF for industrial wastewater treatment.

Effect of NaOCl and ClO2 on seawater desalination using reverse osmosis with cartridge filtration as the pretreatment during the algal bloom

Increased seawater temperature leads to harmful algal blooms (HABs), which releases toxic materials and extracellular polymeric substances (EPS) that are harmful to both humans and the environment. Reverse osmosis (RO) with cartridge filter (CF) as the pretreatment process is often used for desalination process. However, the EPS causes severe fouling on the CF, and RO membrane. Disinfectants, such as NaOCl and ClO2, are commonly used to remove biofouling, because they can oxidize and kill microorganisms. Therefore, our study aims to utilize NaOCl and ClO2 during the CF-RO process to minimize the algal growth within the system and minimize the fouling induced by EPS. Results from this study show that CF can remove more than 50% of protein and 14% of polysaccharides but is not effective in removing toxins. However, with disinfectants, toxic materials were completely oxidized. Improved removal of EPS with CF improved overall performance. The flux reduction in RO process without disinfection was over 60%, however, the flux decline was about 44% and 10% with NaOCl and ClO2, respectively. Both disinfectants were found to be effective, however use of ClO2 is recommended because it is less damaging the membrane, yet more effective in enhancing the performance.

Cationic cellulose filter papers modified with ZnO/Ag/GO nanocomposite as point of use gravity-driven filters for bacterial removal from water

The surface modification of filters with large pore sizes for the development of low-cost gravity-driven point-of-use (POU) technologies for water disinfection can be an effective strategy to empower people to access safe water instantly, especially in low- and middle-income countries. In this study, the surface of commercial cellulose filter papers, as cheap and bio-based filters, was modified with polydopamine (PDA), polyethyleneimine (PEI) and ZnO/Ag/GO nanocomposite (ZnO/Ag/GO@PDA/PEI papers) for bacterial removal from water. PDA/PEI incorporation introduced a cationic functional layer, which can entrap negative bacteria and make a stable chemical bond with the nanocomposite. ZnO/Ag/GO exhibited promising synergistic antibacterial activities (30 times stronger than ZnO). As a result, 3 sheets of ZnO/Ag/GO@PDA/PEI papers showed a 99.98% bacterial reduction (E. coli), which met the WHO standards. Moreover, the leached zinc and silver in the filtrate were far below the WHO's limits (380 and 10 ppb, respectively). The results showed that the modified papers could be reused multiple times. After six times of reuse, the flow rate dropped slightly (below 20%) and the bacterial removal efficiency was more than 99.9%. This study is valuable for developing filters for treating bacterial-contaminated water on-site with no need for energy, which is a demand in many countries.

Phosphorus-modified copper ferrite (P-CuFe2O4) nanoparticles for photocatalytic ozonation of lomefloxacin

Phosphorus-modified copper ferrite (P-CuFe2O4) nanoparticles were prepared by a simple sol-gel auto-combustion process and used for the photocatalytic ozonation of lomefloxacin (LOM). The morphology, crystallinity, and structure of the synthesized CuFe2O4 and P-CuFe2O4 nanoparticles were investigated using various techniques. The high-performance liquid chromatography (HPLC) analysis revealed that the degradation of LOM achieved a 99% reduction after a duration of 90 min in the photocatalytic ozonation system. In accordance with the charge-to-mass ratio, four intermediates were proposed with the help of their fragments obtained in LC-MS/MS. The degradation kinetics of lomefloxacin followed a pseudo-first order reaction, and the degradation mechanism was proposed based on the results. P0.035Cu0.965Fe2O4 showed the highest total organic carbon (TOC) removal with 20.15% in 90 min, highest specific surface area and the highest fluoride and ammonium production using the ion chromatography (IC). The experimental results obtained from the electron paramagnetic resonance (EPR) analysis indicated that the modified P-CuFe2O4 samples exhibited significantly elevated levels of superoxide (.O2-) production compared to the CuFe2O4 samples. The findings of this study demonstrate that the introduction of phosphorus modification into the copper ferrite photocatalyst led to an augmentation of both the specific surface area and the total pore volume. Furthermore, the incorporation of phosphorus served to promote the efficient separation of electron-hole pairs by effectively trapping electrons in the conduction band, hence enhancing the degradation efficiency.

Continuous flow operation of solar photo-Fenton fused with NaOCl as a novel tertiary treatment

A novel strategy based on solar photo-Fenton mediated by ferric nitrilotriacetate (Fe3+-NTA) combined with NaOCl in continuous flow mode for wastewater reclamation has been studied. Escherichia coli (E. coli) inactivation attained ≥ 5 log10-units, meeting the most restrictive EU 2020/741 target (10 CFU/100 mL), and 75% of organic microcontaminant total load was removed. As a remarkable finding, trihalomethanes (THMs) concentration was insignificant, complying by far with the Italian legislation limit. To attain these results, first the effect of liquid depth on E. coli inactivation and imidacloprid (IMD) removal from spiked municipal effluents was evaluated in continuous flow pilot-scale raceway pond reactors at 60-min hydraulic residence time with low reagent concentrations (0.10 mM Fe3+-NTA, 0.73 mM H2O2 and 0.13 mM NaOCl). Disinfection was due to the bactericidal effect of chlorine. In contrast, liquid depth notably influenced microcontaminant removal, highlighting that operation at 10-cm liquid depth allows achieving treatment capacities higher than at 5 cm (16.50 vs 28.20 mg IMD/m2∙day). Next, the monitoring of THMs was carried out to evaluate the generation and degradation of disinfection by-products, along with the removal of actual microcontaminants. These promising results draw attention to the treatment potential and open the way for its commercial application.

Application of Membrane Filtration to Cold Sterilization of Drinks and Establishment of Aseptic Workshop

Aseptic packaging of high quality beverage is necessary and its cold-pasteurization or sterilization is vital. Studies on application of ultrafiltration or microfiltration membrane to cold- pasteurization or sterilization for the aseptic packaging of beverages have been reviewed. Designing and manufacturing ultrafiltration or microfiltration membrane systems for cold-pasteurization or sterilization of beverage are based on the understanding of size of microorganisms and theoretical achievement of filtration. It is concluded that adaptability of membrane filtration, especially its combination with other safe cold method, to cold- pasteurization and sterilization for the aseptic packaging of beverages should be assured without a shadow of doubt in future.

Determination of biological activities of nanoparticles containing silver and copper in water disinfection with/without ultrasound technique

The final and most crucial step in obtaining clean water is disinfection. More innovative methods of water disinfection have recently been sought. Water disinfection is a promising application for nanoparticles as disinfectants. As a contribution to the literature, biofilm and metal-containing nanoparticles as antiadhesion inhibitors were used in conjunction with ultrasound in this study. The microbroth dilution test was used to reveal the microbiological antibacterial activities of different concentrations of AgNO3 and CuCl2 containing nanoparticles against the Escherichia coli ATCC 25,922 strain, which is an indicator bacterium in water systems. Antibiofilm activities were then investigated using biofilm attachment and biofilm inhibition tests. The inhibitory effect of nanoparticle ultrasonic waves on biofilm contamination was determined using a novel approach. Human keratinocyte cells (HaCaT cell line) were used in cell culture studies after water disinfection, and their cytotoxic effects were demonstrated using the MTT assay. The findings suggest that the nanoparticles utilized might be a viable choice for water disinfection applications. Furthermore, employing ultrasound at low doses with nanoparticles resulted in greater results. One feasible option is to employ nanoparticles to cleanse water without producing cytotoxicity.

Directional Separation of Highly Reductive Electrons to the Reactive Center in a Magnetic S-Scheme ZnFe2O4/A-MoS2 Heterojunction for Enhanced Peroxymonosulfate Activation toward Pharmaceuticals and Personal Care Product Removal

Pharmaceuticals and personal care products (PPCPs) are ubiquitous in sewage, adversely affecting ecosystems and human health. In this study, an S-scheme magnetic ZnFe₂O₄/ammoniated MoS₂ (ZnFe₂O₄/A-MoS₂) heterojunction as a visible-light-driven PMS activator for PPCP degradation was developed. ZnFe₂O₄/A-MoS₂ achieves improved photocatalytic activity because the construction of S-scheme heterojunction promotes the separation of the highly reductive photogenerated electrons. The optimized photocatalyst (10%-ZnFe₂O₄/A-MoS₂, 0.2 g/L) achieved 100% removal of 2 ppm carbamazepine (CBZ) within 2.5 min at a PMS dosage of 0.5 mM (initial pH 7.0). Mechanistic investigation revealed that the separated electrons to the ZnFe₂O₄ reactive center of the heterojunction facilitated PMS activation and generated SO₄^·- as the dominant reactive species for CBZ degradation. The system exhibited excellent practicability in various samples of actual sewage, where most sewage components negatively impacted CBZ degradation. Further, the chloride ions in high-salinity sewage could be activated to generate additional reactive chlorine species for PPCP degradation. The heterojunction possesses outstanding reusability and stability in treating various water conditions. This work provides mechanistic and practical perspectives in developing novel S-type heterojunctions for recalcitrant pollutant treatment.

Microbial inactivation kinetics of UV LEDs and effect of operating conditions: A methodological critical analysis

Tiny ultraviolet (UV) light-emitting diodes (LED)s that are replacing the conventional energy-intensive mercury UV lamps have gained interest since the early 2000's because of their promising advantages. In the context of microbial inactivation (MI) of waterborne microbes, disinfection kinetics of those LEDs exhibited variations among studies, in terms of varying the UV wavelength, the exposure time, power, and dose (UV fluence) as well as other operational conditions. While reported results may appear contradictory when examined separately, they probably are not when analyzed collectively. As such, in this study, we carry out a quantitative collective regression analysis of the reported data to shed light on the kinetics of MI by the emerging UV LEDs technology alongside the effects of varying operational conditions. The main goal is to identify dose response requirements for UV LEDs and to compare them to traditional UV lamps in addition to ascertaining optimal settings that could help in achieving the optimal inactivation outcome for comparable UV doses. The analysis showed that kinetically, UV LEDs are as effective as conventional mercury lamps for water disinfection, and at times more effective, especially for UV resistant microbes. We defined the maximal efficiency at two wavelengths, 260-265 nm and 280 nm, among a wide range of available LED wavelengths. We also defined the UV fluence per log inactivation of tested microbes. At the operational level, we identified existing gaps and developed a framework for a comprehensive analysis program for future needs.

Integrating life cycle assessment with quantitative microbial risk assessment for a holistic evaluation of sewage treatment plant

An integrated approach was employed in the present study to combine life cycle assessment (LCA) with quantitative microbial risk assessment (QMRA) to assess an existing sewage treatment plant (STP) at Roorkee, India. The midpoint LCA modeling revealed that high electricity consumption (≈ 576 kWh.day^-1) contributed to the maximum environmental burdens. The LCA endpoint result of 0.01 disability-adjusted life years per person per year (DALYs pppy) was obtained in terms of the impacts on human health. Further, a QMRA model was developed based on representative sewage pathogens, including E. coli O157:H7, Giardia sp., adenovirus, norovirus, and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The public health risk associated with intake of pathogen-laden aerosols during treated water reuse in sprinkler irrigation was determined. A cumulative health risk of 0.07 DALYs pppy was obtained, where QMRA risks contributed 86 % of the total health impacts. The annual probability of illness per person was highest for adenovirus and norovirus, followed by SARS-CoV-2, E. coli O157:H7 and Giardia sp. Overall, the study provides a methodological framework for an integrated LCA-QMRA assessment which can be applied across any treatment process to identify the hotspots contributing maximum environmental burdens and microbial health risks. Furthermore, the integrated LCA-QMRA approach could support stakeholders in the water industry to select the most suitable wastewater treatment system and establish regulations regarding the safe reuse of treated water.

High-throughput sequencing as a tool for monitoring prokaryote communities in a wastewater treatment plant

In this study, the DNA metabarcoding technique was used to explore the prokaryote diversity and community structure in wastewater collected in spring and winter 2020-2021 as well as the efficiency of the treatment in a wastewater treatment plant (WWTP) in Ría de Vigo (NW Spain). The samplings included raw wastewater from the inlet stream (M1), the discharge water after the disinfection treatment (M3) and mussels used as bioindicators of possible contamination of the marine environment. Significant differences were discovered in the microbiome of each type of sample (M1, M3 and mussels), with 92 %, 45 % and 44 % of exclusive OTUs found in mussel, M3 and M1 samples respectively. Seasonal differences were also detected in wastewater samples, with which abiotic parameters (temperature, pH) could be strongly involved. Bacteria present in raw wastewater (M1) were associated with the human gut microbiome, and therefore, potential pathogens that could be circulating in the population in specific periods were detected (e.g., Arcobacter sp. and Clostridium sp.). A considerable decrease in putative pathogenic organisms from the M1 to M3 wastewater fractions and the scarce presence in mussels (<0.5 % total reads) confirmed the effectiveness of pathogen removal in the wastewater treatment plant. Our results showed the potential of the DNA metabarcoding technique for monitoring studies and confirmed its application in wastewater-based epidemiology (WBE) and environmental contamination studies. Although this technique cannot determine if the infective pathogens are present, it can characterize the microbial communities and the putative pathogens that are circulating through the population (microbiome of M1) and also confirm the efficacy of depuration treatment, which can directly affect the aquaculture sector and even human and veterinary health.

Ozone application in different industries: A review of recent developments

Ozone - a powerful antimicrobial agent, has been extensively applied for decontamination purposes in several industries (including food, water treatment, pharmaceuticals, textiles, healthcare, and the medical sectors). The advent of the COVID-19 pandemic has led to recent developments in the deployment of different ozone-based technologies for the decontamination of surfaces, materials and indoor environments. The pandemic has also highlighted the therapeutic potential of ozone for the treatment of COVID-19 patients, with astonishing results observed. The key objective of this review is to summarize recent advances in the utilisation of ozone for decontamination applications in the above-listed industries while emphasising the impact of key parameters affecting microbial reduction efficiency and ozone stability for prolonged action. We realise that aqueous ozonation has received higher research attention, compared to the gaseous application of ozone. This can be attributed to the fact that water treatment represents one of its earliest applications. Furthermore, the application of gaseous ozone for personal protective equipment (PPE) and medical device disinfection has not received a significant number of contributions compared to other applications. This presents a challenge for which the correct application of ozonation can mitigate. In this review, a critical discussion of these challenges is presented, as well as key knowledge gaps and open research problems/opportunities.

Review of hospital effluents: special emphasis on characterization, impact, and treatment of pollutants and antibiotic resistance

Health care institutions generate large volumes of liquid effluents from specific activities related to healthcare, analysis, and research. Their direct discharge into the environment has various negative effects on aquatic environments and human health, due to their high organic matter charges and the presence of various emerging contaminants such as disinfectants, drugs, bacteria, viruses, and parasites. Moreover, hospital effluents, by carrying antibiotics, contribute to the development of antibiotic-resistant microorganisms in the environment. This resistance has become a global issue that manifests itself variously in different countries, causing the transmission of different infections. In this respect, an effort is provided to protect water resources by current treatment methods that imply physical-chemical processes such as adsorption and advanced oxidation processes, biological processes such as activated sludge and membrane bioreactors and other hybrid techniques. The purpose of this review is to improve the knowledge on the composition and impact of hospital wastewater on man and the environment, highlighting the different treatment techniques appropriate to this type of disposal before discharge into the environment.

Strategies for safe management of hospital wastewater during the COVID-19 pandemic

Management of hospital wastewater is a challenging task, particularly during the situations like coronavirus 2019 (COVID-19) pandemic. The hospital effluent streams are likely to contain many known and unknown contaminants including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) along with a variety of pollutants arising from pharmaceuticals, life-style chemicals, drugs, radioactive species, and human excreta from the patients. The effluents are a mixed bag of contaminants with some of them capable of infecting through contact. Hence, it is essential to identify appropriate treatment strategies for hospital waste streams. In this work, various pollutants emerging in the context of COVID-19 are examined. A methodical review is conducted on the occurrence and disinfection methods of SARS-CoV-2 in wastewater. An emphasis is given to the necessity of addressing the challenges of handling hospital effluents dynamically involved during the pandemic scenario to ensure human and environmental safety. A comparative evaluation of disinfection strategies makes it evident that the non-contact methods like ultraviolet irradiation, hydrogen peroxide vapor, and preventive approaches such as the usage of antimicrobial surface coating offer promise in reducing the chance of disease transmission. These methods are also highly efficient in comparison with other strategies. Chemical disinfection strategies such as chlorination may lead to further disinfection byproducts, complicating the treatment processes. An overall analysis of various disinfection methods is presented here, including developing methods such as membrane technologies, highlighting the merits and demerits of each of these processes. Finally, the wastewater surveillance adopted during the COVID-19 outbreak is discussed.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13762-023-04803-1.

Multifunctional Heterogeneous Ion-Exchange Membranes for Ion and Microbe Removal in Low-Salinity Water

Here, multifunctional heterogeneous ion-exchange metal nanocomposite membranes were prepared for surface water desalination and bacterial inactivation under low-pressure (0.05 MPa) filtration conditions. Ultrafiltration (UF) heterogeneous ion exchange membranes (IEMs) were modified with different concentrations of AgNO₃ and CuSO₄ solutions using the intermatrix synthesis (IMS) technique to produce metal nanocomposite membranes. Scanning electron microscopy (SEM) images revealed that the metal nanoparticles (MNPs) (Ag and Cu) were uniformly distributed on the surface and the interior of the nanocomposite membranes. With increasing metal precursor solution concentration (0.01 to 0.05 mol·L^-1), the metal content of Ag and Cu nanocomposite membranes increased from 0.020 to 0.084 mg·cm^-2 and from 0.031 to 0.218 m·cm^-2 respectively. Results showed that the hydrodynamic diameter diameters of Ag and Cu nanoparticles (NPs) increased from 62.42 to 121.10 nm and from 54.2 to 125.7 nm respectively, as the metal precursor concentration loaded increased. The leaching of metals from metal nanocomposite membranes was measured in a dead-end filtration system, and the highest leaching concentration levels were 8.72 ppb and 5.32 ppb for Ag and Cu, respectively. The salt rejection studies indicated that ionic selectivity was improved with increasing metal content. Bacterial filtration showed higher antibacterial activity for metal nanocomposite membranes, reaching 3.6 log bacterial inactivation.

Virus inactivation by sequential ultraviolet-chlorine disinfection: Synergistic effect and mechanism

The COVID-19 outbreak has raised concerns about the efficacy of the disinfection process followed in water treatment plants in preventing the spread of viruses. Ultraviolet (UV) and chlorine multi-barrier disinfection processes are commonly used in water treatment plants; however, their effects on virus inactivation are still unclear. In this study, the effects of different disinfection processes (i.e., UV, free chlorine, and their combination) on waterborne viruses were analyzed using bacteriophage surrogates (i.e., MS2 and PR772) as alternative indicators. The results showed that the inactivation rates of PR772 by either UV or free chlorine disinfection were higher than those of MS2. PR772 was approximately 1.5 times more sensitive to UV disinfection and 8.4 times more sensitive to chlorine disinfection than MS2. Sequential UV-chlorine disinfection had a synergistic effect on virus inactivation, which was enhanced by an increase in the UV dose. As compared with single free chlorine disinfection, UV irradiation at 40 mJ cm^-2 enhanced MS2 and PR772 inactivation significantly with a 2.7-fold (MS2) and a 1.7-fold (PR772) increase in the inactivation rate constants on subsequent chlorination in phosphate buffered saline. The synergistic effect was also observed in real wastewater samples, in which the MS2 inactivation rate increased 1.4-fold on subsequent chlorination following UV irradiation at 40 mJ cm^-2. The mechanism of the synergistic effect of sequential UV-chlorine disinfection was determined via sodium dodecyl sulfate-polyacrylamide gel electrophoresis, using MS2 as an indicator. The results showed that the synergistic effect was due to damage to MS2 surface proteins caused by previous UV disinfection, which enhanced the sensitivity of MS2 to chlorination. This study provides a feasible approach for the efficient inactivation of viruses in water supply and drainage.

Recent approaches and advanced wastewater treatment technologies for mitigating emerging microplastics contamination - A critical review

Microplastics have been identified as an emerging pollutant due to their irrefutable prevalence in air, soil, and particularly, the aquatic ecosystem. Wastewater treatment plants (WWTPs) are seen as the last line of defense which creates a barrier between microplastics and the environment. These microplastics are discharged in large quantities into aquatic bodies due to their insufficient containment during water treatment. As a result, WWTPs are regarded as point sources of microplastics release into the environment. Assessing the prevalence and behavior of microplastics in WWTPs is therefore critical for their control. The removal efficiency of microplastics was 65 %, 0.2-14 %, and 0.2-2 % after the successful primary, secondary and tertiary treatment phases in WWTPs. In this review, other than conventional treatment methods, advanced treatment methods have also been discussed. For the removal of microplastics in the size range 20-190 μm, advanced treatment methods like membrane bioreactors, rapid sand filtration, electrocoagulation and photocatalytic degradation was found to be effective and these methods helps in increasing the removal efficiency to >99 %. Bioremediation based approaches has found that sea grasses, lugworm and blue mussels has the ability to mitigate microplastics by acting as a natural trap to the microplastics pollutants and could act as candidate species for possible incorporation in WWTPs. Also, there is a need for controlling the use and unchecked release of microplastics into the environment through laws and regulations.

Microplastics toxicity, detection, and removal from water/wastewater

The world has witnessed massive and preeminent microplastics (MPs) pollution in water bodies due to the inevitable continuous production of plastics for various advantageous chemical and mechanical features. Plastic pollution, particularly contamination by MPs (plastic particles having a diameter lesser than 5 mm), has been a rising environmental concern in recent years due to the inappropriate disposal of plastic trash. This study presents the recent advancements in different technologies for MPs removal in order to gain proper insight into their strengths and weaknesses, thereby orchestrating the preparation for innovation in the field. The production, origin, and global complexity of MPs were discussed. This study also reveals MPs' mode of transportation, its feedstock polymers, toxicities, detection techniques, and the conventional removal strategies of MPs from contaminated systems. Modification of conventional methods vis-à-vis new materials/techniques and other emerging technologies, such as magnetic extraction and sol-gel technique with detailed mechanistic information for the removal of MPs are presented in this study. Conclusively, some future research outlooks for advancing the MPs removal technologies/materials for practical realization are highlighted.

Wastewater substrate disinfection for cyanobacteria cultivation as tertiary treatment

Cultivation of microalgae or/and cyanobacteria in nutrient-rich wastewaters offers an opportunity for enhancing sustainability of tertiary wastewater treatment processes via resources/energy recovery/production, mitigation of emitted GHGs and provision of added value products. However, maintaining a monoculture in wastewater-media constitutes a significant challenge to be addressed. In this regard, the present work assesses the efficiency of the low-cost wastewater substrate disinfection techniques of filtration, use of NaClO, H₂O₂ or Fe(VI), as a preliminary treatment stage upstream a cyanobacteria cultivation photobioreactor. The growth rate of cyanobacterium Synechococcus elongatus PCC 7942, and nitrate and phosphate removal rates, were experimentally assessed in cultivation setups with biologically treated dairy wastewater that had been subjected to a single or a synergetic couple of disinfection techniques. The results showed that filter thickness has a greater effect on disinfection efficiency than filter pore size. Furthermore, the disinfection efficiency of Fe(VI), which was produced on-site by electrosynthesis via a Fe⁰/Fe⁰ cell, was greater than that of NaClO and H₂O₂. Filtration at ≤ 1.2-μm pore size coupled with chemical disinfection led to unhindered Synechococcus elongatus PCC 7942 growth and efficient nitrate and phosphate removal rates, at dosages, in terms of Concentreation-Time (CT) product, of CT ≥ 270 mg min L^-1 for NaClO and CT ≥ 157 mg min L^-1 for Fe(VI). The coagulation action of Fe(III) species that result from Fe(VI) reduction and the oxidation action of Fe(VI) can assist in turbidity, organic compounds and phosphorous removal from wastewater media. Moreover, the residual iron species can assist in Synechococcus elongatus PCC 7942 harvesting and may enhance photosynthesis rate by increasing light transfer efficiency. Thus, a filtration configuration coupled with chemical disinfection, preferably using ferrates, downstream of sedimentation tank of a secondary biological wastewater treatment stage is proposed as a necessary, efficient and low-cost disinfection technique for full-scale scale implementation of cyanobacteria cultivation as tertiary wastewater processes.

The Lesson Learned from the COVID-19 Pandemic: Can an Active Chemical Be Effective, Safe, Harmless-for-Humans and Low-Cost at a Time? Evidence on Aerosolized Hypochlorous Acid

The COVID-19 pandemic has underlined the importance of disinfectants as tools to prevent and fight against coronavirus spreading. An ideal disinfectant and sanitizer must be nontoxic to surface contact, noncorrosive, effective, and relatively inexpensive as it is hypochlorous acid (HOCl). The present work intended to evaluate, on different surfaces, the bactericidal and virucidal effectiveness of nebulized HOCl and test its safety usage in 2D and 3D skin and lung models. Our data showed that HOCl at the dose of 300 ppm did not affect cellular and tissue viability, not their morphology. The HOCl bactericidal properties varies with the surface analyzed: 69% for semi-porous, 96-99.9% for flat and porous. This discrepancy was not noticed for the virucidal properties. Overall, this study showed that nebulized HOCl can prevent virus and bacteria growth without affecting lung and skin tissues, making this compound a perfect candidate to sanitize indoor environments.

Can Common Pool Resource Theory Catalyze Stakeholder-Driven Solutions to the Freshwater Salinization Syndrome?

Freshwater salinity is rising across many regions of the United States as well as globally, a phenomenon called the freshwater salinization syndrome (FSS). The FSS mobilizes organic carbon, nutrients, heavy metals, and other contaminants sequestered in soils and freshwater sediments, alters the structures and functions of soils, streams, and riparian ecosystems, threatens drinking water supplies, and undermines progress toward many of the United Nations Sustainable Development Goals. There is an urgent need to leverage the current understanding of salinization's causes and consequences─in partnership with engineers, social scientists, policymakers, and other stakeholders─into locally tailored approaches for balancing our nation's salt budget. In this feature, we propose that the FSS can be understood as a common pool resource problem and explore Nobel Laureate Elinor Ostrom's social-ecological systems framework as an approach for identifying the conditions under which local actors may work collectively to manage the FSS in the absence of top-down regulatory controls. We adopt as a case study rising sodium concentrations in the Occoquan Reservoir, a critical water supply for up to one million residents in Northern Virginia (USA), to illustrate emerging impacts, underlying causes, possible solutions, and critical research needs.

Recent advances in aqueous virus removal technologies

The COVID-19 outbreak has triggered a massive research, but still urgent detection and treatment of this virus seems a public concern. The spread of viruses in aqueous environments underlined efficient virus treatment processes as a hot challenge. This review critically and comprehensively enables identifying and classifying advanced biochemical, membrane-based and disinfection processes for effective treatment of virus-contaminated water and wastewater. Understanding the functions of individual and combined/multi-stage processes in terms of manufacturing and economical parameters makes this contribution a different story from available review papers. Moreover, this review discusses challenges of combining biochemical, membrane and disinfection processes for synergistic treatment of viruses in order to reduce the dissemination of waterborne diseases. Certainly, the combination technologies are proactive in minimizing and restraining the outbreaks of the virus. It emphasizes the importance of health authorities to confront the outbreaks of unknown viruses in the future.

Sensing Gas Mixtures by Analyzing the Spatiotemporal Optical Responses of Liquid Crystals Using 3D Convolutional Neural Networks

We report how analysis of the spatial and temporal optical responses of liquid crystal (LC) films to targeted gases, when performed using a machine learning methodology, can advance the sensing of gas mixtures and provide important insights into the physical processes that underlie the sensor response. We develop the methodology using O₃ and Cl₂ mixtures (representative of an important class of analytes) and LCs supported on metal perchlorate-decorated surfaces as a model system. Although O₃ and Cl₂ both diffuse through LC films and undergo redox reactions with the supporting metal perchlorate surfaces to generate similar initial and final optical states of the LCs, we show that a three-dimensional convolutional neural network can extract feature information that is encoded in the spatiotemporal color patterns of the LCs to detect the presence of both O₃ and Cl₂ species in mixtures and to quantify their concentrations. Our analysis reveals that O₃ detection is driven by the transition time over which the brightness of the LC changes, while Cl₂ detection is driven by color fluctuations that develop late in the optical response of the LC. We also show that we can detect the presence of Cl₂ even when the concentration of O₃ is orders of magnitude greater than the Cl₂ concentration. The proposed methodology is generalizable to a wide range of analytes, reactive surfaces, and LCs and has the potential to advance the design of portable LC monitoring devices (e.g., wearable devices) for analyzing gas mixtures using spatiotemporal color fluctuations.

A review on disinfection methods for inactivation of waterborne viruses

Water contamination is a global health problem, and the need for safe water is ever-growing due to the public health implications of unsafe water. Contaminated water could contain pathogenic bacteria, protozoa, and viruses that are implicated in several debilitating human diseases. The prevalence and survival of waterborne viruses differ from bacteria and other waterborne microorganisms. In addition, viruses are responsible for more severe waterborne diseases such as gastroenteritis, myocarditis, and encephalitis among others, hence the need for dedicated attention to viral inactivation. Disinfection is vital to water treatment because it removes pathogens, including viruses. The commonly used methods and techniques of disinfection for viral inactivation in water comprise physical disinfection such as membrane filtration, ultraviolet (UV) irradiation, and conventional chemical processes such as chlorine, monochloramine, chlorine dioxide, and ozone among others. However, the production of disinfection by-products (DBPs) that accompanies chemical methods of disinfection is an issue of great concern due to the increase in the risks of harm to humans, for example, the development of cancer of the bladder and adverse reproductive outcomes. Therefore, this review examines the conventional disinfection approaches alongside emerging disinfection technologies, such as photocatalytic disinfection, cavitation, and electrochemical disinfection. Moreover, the merits, limitations, and log reduction values (LRVs) of the different disinfection methods discussed were compared concerning virus removal efficiency. Future research needs to merge single disinfection techniques into one to achieve improved viral disinfection, and the development of medicinal plant-based materials as disinfectants due to their antimicrobial and safety benefits to avoid toxicity is also highlighted.

Profiling microalgal cultures growing on municipal wastewater and fertilizer media in raceway photobioreactors

Microalgae cultivation is proposed as an effective system for pathogens reduction and wastewater depuration, however, a full characterisation of the risks is still needed. Two raceways were inoculated with Scenedesmus, one using wastewater and the other using a fertilizer medium. Microbial community and pathogen presence were explored by next generation sequencing (NGS), commercial qPCR array and plate counts. These methods proved to be complementary for a full characterization of community structure and potential risks. Media and sampling locations contributed to shape communities and pathogenic loads. The main pathogenic genera detected were Arcobacter and Elizabethkingia (mainly in wastewater) with an important presence of Aeromonas (all samples). A lower presence of pathogens was detected in fertilizer samples, while wastewater showed a reduction from inlet to outlet. Raceways showed potential as an effective biotreatment, with most of the retained pathogens released in the outlet and only a minor part settled in the biomass.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Arc and pulsed spark discharge inactivation of pathogenic P. aeruginosa, S. aureus, M. canis, T. mentagrophytes, and C. albicans microorganisms

There is a strong and ever-escalating need for sterilization tools that are effective against a broad range of pathogenic microorganisms. To address this issue, this study evaluates the inactivation potential of arc and pulsed spark plasma discharges on Pseudomonas aeruginosa, Staphylococcus aureus, Microsporum canis, Trichophyton mentagrophytes, and Candida albicans microorganisms. Our results show that the electrical discharge plasma systems are effective in the inactivation of pathogenic microorganisms. The inactivation of the considered strains was greatly affected by the type of microorganisms. Higher viability losses of the pathogenic strains were observed in bacterial strains than in the fungal strains. Moreover, in the case of fungal strains, the population of C. albicans was decreased the most, followed by Trichophyton mentagrophyte, while the population of Microsporum canis was decreased the least. Besides, the arc discharge system was compared with the pulsed spark discharge system. It can be obtained from the results that the pulsed spark discharge treatment successfully enhanced the reduction of the pathogenic cells more than the arc discharge treatment. The higher efficiency of the pulsed spark discharge is due to the generation of discharge streamers on the water surface. The SEM analyses showed that electrical discharge plasmas produced serious damage to pathogenic eukaryotic and prokaryotic microorganisms. Also, the plasma-induced changes in pH values and temperature values were measured. The pulsed spark discharge-treated samples have more significant changes in pH value while arc discharge-treated samples have larger temperature changes.

A systematic review on chlorine tolerance among bacteria and standardization of their assessment protocol in wastewater

Though chlorine is a cost-effective disinfectant for water and wastewaters, the bacteria surviving after chlorination pose serious public health and environmental problems. This review critically assesses the mechanism of chlorine disinfection as described by various researchers; factors affecting chlorination efficacy; and the re-growth potential of microbial contaminations in treated wastewater post chlorination to arrive at meaningful doses for ensuring health safety. Literature analysis shows procedural inconsistencies in the assessment of chlorine tolerant bacteria, making it extremely difficult to compare the tolerance characteristics of different reported tolerant bacteria. A comparison of logarithmic reduction after chlorination and the concentration-time values for prominent pathogens led to the generation of a standard protocol for the assessment of chlorine tolerance. The factors that need to be critically monitored include applied chlorine doses, contact time, determination of chlorine demands of the medium, and the consideration of bacterial counts immediately after chlorination and in post chlorinated samples (regrowth). The protocol devised here appropriately assesses the chlorine-tolerant bacteria and urges the scientific community to report the regrowth characteristics as well. This would increase the confidence in data interpretation that can provide a better understanding of chlorine tolerance in bacteria and aid in formulating strategies for effective chlorination.

Viral Eco-Genomic Tools: Development and Implementation for Aquatic Biomonitoring

Enteric viruses (EVs) occurrence within aquatic environments varies and leads to significant risk on public health of humans, animals, and diversity of aquatic taxa. Early and efficacious recognition of cultivable and fastidious EVs in aquatic systems are important to ensure the sanitary level of aquatic water and implement required treatment strategies. Herein, we provided a comprehensive overview of the conventional and up-to-date eco-genomic tools for aquatic biomonitoring of EVs, aiming to develop better water pollution monitoring tools. In combination with bioinformatics techniques, genetic tools including cloning sequencing analysis, DNA microarray, next-generation sequencing (NGS), and metagenomic sequencing technologies are implemented to make informed decisions about the global burden of waterborne EVs-associated diseases. The data presented in this review are helpful to recommend that: (1) Each viral pollution detection method has its own merits and demerits; therefore, it would be advantageous for viral pollution evaluation to be integrated as a complementary platform. (2) The total viral genome pool extracted from aquatic environmental samples is a real reflection of pollution status of the aquatic eco-systems; therefore, it is recommended to conduct regular sampling through the year to establish an updated monitoring system for EVs, and quantify viral peak concentrations, viral typing, and genotyping. (3) Despite that conventional detection methods are cheaper, it is highly recommended to implement molecular-based technologies to complement aquatic ecosystems biomonitoring due to numerous advantages including high-throughput capability. (4) Continuous implementation of the eco-genetic detection tools for monitoring the EVs in aquatic ecosystems is recommended.

The Geological Characteristics of the Vadose Zone Influence the Impact of Treated Wastewater on the Groundwater Quality (SCA.Re.S. Project 2019-2020)

This study evaluated whether some chemical and microbial contaminants in treated sewage effluents from two wastewater treatment plants (WWTP) reached the groundwater when they drained through a fractured karst vadose zone (WWTP-K) and a porous vadose zone (WWTP-P). Forty-five samples of sewage water (SW), treated water (TW), and monitoring well (MW), collected from WWTP-P (24) and WWTP-K (21), were analyzed for a range of microbiological and chemical properties. The E. coli and Salmonella counts were below the limits outlined in the Legislative Decree 152/06 in effluents from both types of WWTP. Enteric viruses were found in 37.5% and 12.5% of the SW and TW from WWTP-P, respectively. The percentages of Pepper mild mottle virus isolated were higher in TW (62.5% in WWTP-P, 85.7% in WWTP-K) than in SW and MW. The residual concentrations of contaminants of emerging concern (CEC) of each drug category were higher in the MW downstream of WWTP-K than of WWTP-P. Our results showed that the porous vadose zone was more effective at reducing the contaminant loads than the fractured karst one, especially the CEC, in the effluent. The legislation should include other parameters to minimize the risks from treated effluent that is discharged to soil.

Green phytoextracts as natural photosensitizers in LED-based photodynamic disinfection of multidrug-resistant bacteria in wastewater effluent

The photodynamic treatment (PDT) process is a promising technology to control emerging pollutants and antimicrobial resistance problems in the water environment. The reactive oxygen species (ROS) produced when natural and nontoxic photosensitizers (PS) are exposed to light are the key functional components of the PDT process that can effectively achieve microbial inactivation with minimal negative impact. This study examined the application of green phytoextracts from two plants, Chamaecyparis obtusa and Moringa oleifera, as natural photosensitizers for the white light-emitting diode (LED) based photodynamic disinfection of multidrug-resistant (MDR) and total coliforms (TC) from secondary effluent in full-scale municipal wastewater treatment plants. Gas chromatography-mass spectrometry and Fourier transform infrared spectroscopy showed that the phytoextracts contained 57 compounds, particularly aromatic and phenolic hydroxyl compounds. The phytoextracts showed an excellent activity as a PS compared to the intrinsic antibacterial effect. Under a light intensity of 17 mW/cm², the complete inactivation (6.55 Log CFU/mL) was observed at an irradiation time of 100 min for Escherichia coli ART-2 and 80 min for Staphylococcus aureus, meaning that E. coli was resistant. The light intensity was an important factor influencing photodynamic disinfection. For the complete disinfection of TC satisfying the water reclamation regulation, the irradiation time requirement was 20 min under a light intensity of 80 mW/cm². During the photodynamic reaction, a significant amount of ROS was generated from the phytoextracts as the light irradiation time was increased. The major ROS was singlet oxygen (¹O₂, Type II) during the initial 40 min of reaction time and hydroxyl radical (•OH, Type I) after 40 min until complete inactivation.

Metrological Traceability and Crucial Detector Characteristics for UVC Metrology in UVGI Applications

Ultraviolet-C (UVC) radiation-based sanitization has globally gained enormous importance in the current COVID-19 (caused by SARS-COV-2 virus) pandemic situation. The effectiveness of radiation sanitization is quantified in terms of ‘radiation dose’, which in turn is derived from a radiometric parameter ‘irradiance’, measured using UVC radiometer. Metrological traceability of irradiance/dose measurement is essentially required for achieving requisite accuracy of measurements, and hence germicidal efficacy. In the present article, the derivation of traceability for irradiance measurement using UVC radiometer is demonstrated. The critical conditions to be considered while using detector/radiometer for measuring UVC irradiance/dose in practical conditions are elaborated, avoiding which, significant errors in the UVC irradiance/dose may arise, and hence, may compromise the performance of the Ultraviolet Germicidal Irradiation (UVGI) devices.

Lytics broadcasting system: A novel approach to disseminate bacteriophages for disinfection and biogenic hydrogen sulphide removal tested in synthetic sewage

Owing to their selective nature, bacteriophages are prospective in targeted wastewater disinfection. Other potential applications include the removal of biogenic malodour and the mitigation of corrosion in sewerage pipelines. Nevertheless, its applications are ridden with challenges, the most prominent of which is scaling up. Towards that end, effective methodologies are required for dispersing phages into wastewater. The study describes a device arbitrarily named Lytics Broadcasting System. In principle, the device contains phages that can be continuously dispersed into wastewater. The modified version is called Bacteriophage Amplification Reactor, which operates with both phages and their respective hosts, ensuring continual production and dissemination of phages. Both prototypes utilize 0.22 μm cellulose membranes as an interface through which phage diffuse passively and selectively owing to its smaller size and established through membrane-overlay method. In the study, previously reported bacteriophage φPh_Se01 and Salmonella enterica were used. A reduction of 3-4 log was achieved with both the prototypes after 48 h of operation in 1 L of augmented synthetic sewage. Subsequently, the biogenic H₂S produced by Salmonella enterica was reduced by 64-74% indicating its utility for targeted disinfection and malodour mitigation of wastewater. This study aims to provide a framework for the development of scalable prototypes of Lytic Broadcasting Systems for real-world wastewater applications.

Constructed wetlands for textile wastewater remediation: A review on concept, pollutant removal mechanisms, and integrated technologies for efficiency enhancement

Textile industries are among the ecologically unsustainable industries that release voluminous wastewater threatening ecosystem health. The constructed wetlands (CWs) are low-cost eco-technological interventions for the management of industrial wastewaters. The CWs are self-sustaining remediation systems that do not require an external source of energy and encompass simple operational mechanisms including biological (bioremediation and phytoremediation), chemical, and physical processes for pollutant removal. This review idiosyncratically scrutinizes the recent advances and developments in CWs, and their types employed for textile wastewater treatment. The major focus is on mechanisms involved during the removal of contaminants from textile wastewater in CWs and factors affecting the performance of the system. The article also discusses the State-of-the-Art integrated technologies e.g., CW-MFCs/algal ponds/sponge iron coupled systems, for the performance and sustainability enhancement of CWs. All the important aspects together with the technology amalgamation are critically synthesized for establishing suitable strategies for CW-based textile wastewater treatment systems.

Quantification of human enteric viruses as alternative indicators of fecal pollution to evaluate wastewater treatment processes

We investigated the potential use and quantification of human enteric viruses in municipal wastewater samples of Winnipeg (Manitoba, Canada) as alternative indicators of contamination and evaluated the processing stages of the wastewater treatment plant. During the fall 2019 and winter 2020 seasons, samples of raw sewage, activated sludge, effluents, and biosolids (sludge cake) were collected from the North End Sewage Treatment Plant (NESTP), which is the largest wastewater treatment plant in the City of Winnipeg. DNA (Adenovirus and crAssphage) and RNA enteric viruses (Pepper mild mottle virus, Norovirus genogroups GI and GII, Rotavirus Astrovirus, and Sapovirus) as well as the uidA gene found in Escherichia coli were targeted in the samples collected from the NESTP. Total nucleic acids from each wastewater treatment sample were extracted using a commercial spin-column kit. Enteric viruses were quantified in the extracted samples via quantitative PCR using TaqMan assays. Overall, the average gene copies assessed in the raw sewage were not significantly different (p-values ranged between 0.1023 and 0.9921) than the average gene copies assessed in the effluents for DNA and RNA viruses and uidA in terms of both volume and biomass. A significant reduction (p-value ≤ 0.0438) of Adenovirus and Noroviruses genogroups GI and GII was observed in activated sludge samples compared with those for raw sewage per volume. Higher GCNs of enteric viruses were observed in dewatered sludge samples compared to liquid samples in terms of volume (g of sample) and biomass (ng of nucleic acids). Enteric viruses found in gene copy numbers were at least one order of magnitude higher than the E. coli marker uidA, indicating that enteric viruses may survive the wastewater treatment process and viral-like particles are being released into the aquatic environment. Viruses such as Noroviruses genogroups GI and GII, and Rotavirus were detected during colder months. Our results suggest that Adenovirus, crAssphage, and Pepper mild mottle virus can be used confidently as complementary viral indicators of human fecal pollution.

Biocide Use in the Beverage Industry: Consumers’ Knowledge and Label Preferences Relating to the Need and Usefulness of Biocides with Particular Reference to Dairy Beverage Products in New Zealand and China

Biocides, in the form of sanitisers and disinfectants, are used extensively to reduce the risk of microbial contamination to beverage products and to ensure the safety of potable water used in processing. To better understand consumers’ perceptions of biocide use and to explore messaging strategies regarding their importance to ensure product safety, eight focus groups were conducted in New Zealand (n = 4) and China (n = 4). Consumers generally did not understand why or how biocides were used. In both countries, their most trustworthy source of information on biocide use was government sources. New Zealand and Chinese participants did not like the word “biocide” mentioned on labels due to its perceived negative connotations. Interestingly, acceptance for the word was higher if the phrase “environmentally friendly” was simultaneously communicated. The findings from this study have provided the beverage industry with guidance on how best to initiate conversations with consumers on the use of biocides.

Conceptualizing a novel Hybrid Decontamination System (HDS) based on UV/H2O2 treatment for the enhanced decontamination and reuse of N95 FFRs

The ongoing Pandemic of COVID-19 caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has severely stressed the worldwide healthcare system and has created dangerous shortages of personal protective equipment (PPE) including N95 filtering facepiece respirators (FFRs). Even though suppliers struggled to meet global demand for N95 masks at an unprecedented level, a shortage of FFR appears as a significant factor in the transmission of the disease to frontline workers. CDC, USA has mentioned that FFR decontamination and reuse may be necessary during times of shortage to ensure guaranteed availability. Hence present stressed condition faced by the healthcare sector seeks for an affordable decontamination strategy that can be replicated easily broadening the utility of FFR decontamination across a range of healthcare settings. After reviewing available literature on the various disinfection techniques that may be used for the decontamination of FFRs, a first of its kind, portable Hybrid Decontamination System/procedure has been conceptualized and designed. This system combines the disinfecting properties of both vaporous hydrogen peroxide (VHP) and ultra-violet C irradiation (UV C) to ensure maximum decontamination of N95 respirators. The instrument will be equipped with a hydrogen peroxide chamber and UV light source. Sterilization of the FFRs will be done through treatment with VHP followed by UV light treatment. The proposed system will allow the user to completely sterilize the FFRs in a time-efficient manner.

Seasonal variations of polycyclic aromatic hydrocarbons in coastal sediments of a marine resource hot spot: the case of pars special economic energy zone, Iran

Polycyclic aromatic hydrocarbons (PAHs) are an important group of compounds of major environmental concern, which are in the class of persistent organic pollutants. Therefore, the key purpose of this research was to analyze seasonal fluctuations and to determine the probability of polycyclic aromatic hydrocarbons in coastal sediments of the Iranian Marine Resource Center based on the evaluation of 16 US-EPA important PAH compounds. These compounds have been collected from intertidal sediments located in the marine resources of southern Iran in different seasons. These samples of the surficial sediment were collected at the PSEEZ area using a stainless steel grab sampler in four seasons, from depths between 0.5 and 30 m. Surface sediment samples were removed by spoons and carefully placed in an aluminum foil; they were taken to the laboratory on ice and held at 20° C until their study. After extraction, by using a rotary evaporator apparatus, samples were condensed. The assay was added to roughly 2 g of activated copper flasks in the refrigerator for 36 h for desulfurization. Among different seasons, the highest concentration was observed in winter, with a mean of 281.3 ng g^-1. According to ecological risk assessment (concentrations of possible effects, low effect range, degree of threshold effects, and median effect range), PAH risks in surface sediments of PSEEZ were lower than the threshold results levels (TEL), possible effects levels (PEL), low range of effects (ERL), and median range of effects (ERM), indicating that a biological effect would rarely occur. The dry weight scale of the concentration of ∑PAHs ranges from 145.7 to 348.42 ng g^-1 with a mean quantity of 260.52 ng g^-1. Therefore, according to the amount of ∑PAH concentration, the sediments in the PSEEZ area indicated moderate to heavy pollutions. In this way, the sedimentary surface ecosystems of the Persian Gulf were considered as moderately polluted compared with other ecosystems worldwide. Our study highlighted some of the research gaps in PAH contamination studies and the level of PAH contamination. Therefore, this study will provide a scientific background, planning, and policies for PAH pollution control and environmental protection in Iran and similar regions around the world.