A highly efficient and selective rapid detection method applied to the detection of amide herbicides in fish serum

Misuse of amide herbicides in the fisheries environment can pose unpredictable harm to aquatic products and ultimately human health. Thus, the development of a real-time, rapid on-site detection method is crucial. This study proposes for the first time, a paper-based visual detection method for amide herbicides in fish serum, by coating the molecularly imprinted polymer layer onto quantum dots, prepared fluorescent sensing materials (QDs@MIPs) for the detection of amide herbicides in aquatic products. These materials specifically cause fluorescence quenching in the presence of amide herbicides resulting in a color change. For practical application, this research designed a rapid test strip based on QDs@MIPs, meanwhile, incorporate a smartphone or a fluorescence spectrophotometer for qualitative and quantitative measurements, the limit of detection ranges of 0.061-0.500 μM. The method can be used for on-site evaluation of aquatic products, providing new technology for monitoring the safety of aquatic products.

Design, synthesis and application of dual-channel fluorescent probes for ratiometric detection of HClO and H2S based on phenothiazine coumarins

The ubiquity of diverse material entities in environmental matrices renders the deployment of unifunctional fluorescent indicators inadequate. Consequently, this study introduces a ratiometric dual-emission fluorescent sensor (Probe CP), synthesized by conjugating phenothiazine coumarin to hydroxycoumarin through a piperazine linker for concurrent detection of HClO and H2S. Upon interaction with HClO, the phenothiazine unit's sulfur atom undergoes oxidation to sulfoxide, facilitating a shift from red to green fluorescence in a ratiometric manner. Concurrently, at the opposite terminus of Probe CP, 2,4-dinitroanisole serves as the reactive moiety for H2S recognition; it restores the blue emission characteristic of 7-hydroxycoumarin while maintaining the red fluorescence emanating from phenothiazine coumarin as an internal standard for ratio-based assessment. Exhibiting elevated specificity and sensitivity coupled with minimal detection thresholds (0.0506 μM for HClO and 1.7292 μM for H2S) alongside rapid equilibration periods (3 min for HClO and half an hour for H2S), this sensor was efficaciously employed in cellular environments and within zebrafish models as well as imaging applications pertaining to alcohol-induced hepatic injury in murine subjects.

A fluorescent chemosensor for selective detection of chromium (III) ions in environmentally and biologically relevant samples

A simple single step one pot multicomponent reaction was performed to synthesize N-(tert-butyl)-2-(furan-2-yl)imidazo[1,2-a]pyridine-3-amine (TBFIPA). The synthesized TBFIPA was subjected to library of cations to study its ability for selective and sensitive detection of specific metal ions. Selective detection of chromium ions by TBFIPA were found from the significant hypsochromic shift (335 nm → 285 nm) in the UV-Visible spectra. The fluorescent TBFIPA displays complete quenching of fluorescence under UV lamp (365 nm) only in the presence of chromium without the interference of common metal ions. Binding constant (ka) obtained from Benesi-Hildebrand plot is 0.21 × 105 M-1, limit of detection (LOD) and limit of quantification (LOQ) of TBFIPA toward Cr3+ ions are 4.70 × 10-7 M and 1.56 × 10-7 M, respectively. The mechanism proposed during complex formation were supported by stoichiometric Job continuous variation plot, 1H NMR titration and ESI-MS spectroscopic data. All the experimental confirmation for complex formation were corroborated with theoretical DFT studies optimized using RB3LYP/6-31G(d) basis set. The selectivity and sensitivity of TBFIPA toward Cr3+ ions are found suitable to design a user-friendly silica based portable test kit. Alongside, TBFIPA was successfully utilized for imaging onion epidermal cells. Furthermore, the results obtained for biological, environmental, and industrial samples provided solid evidence to estimate chromium ions using TBFIPA in these real samples.

Nitrogen-doped carbon dots as fluorescent probes for sensitive and selective determination of Fe3

At present, the contamination of water resources by heavy metal ions has posed a significant threat to human survival. Therefore, it is particularly critical to develop low-cost, easy-to-use, and highly efficient heavy metal detection technologies. In this work, a fast and cost-effective fluorescent probe for nitrogen-doped carbon dots (N-CDs) was prepared using one-step hydrothermal method with citric acid (CA) as carbon source, and melamine as nitrogen source. The structural and optical characterizations of the resulting N-CDs were investigated in details. The results showed that the quantum yield of the prepared fluorescent probe was as high as 45 %, and an average fluorescence lifetime was about 7.80 ns. N-CDs have excellent water solubility and dispersibility, with an average size of 2.58 nm. N-CDs exhibited excellent specific responsiveness to Fe3+ and can be used as an effective method for detecting Fe3+ at low-concentrations (the concentrations of N-CDs as low as 0.24 μg/mL) using fluorescent probes. The linear response of the fluorescent probe N-CDs to Fe3+ was formed in the concentration range of 20-80 μM, and the detection limit was 3.18 μM. In addition, in the actual water samples analysis, the recovery rate reached 97.05-100.58 %. The prepared of N-CDs provide available Fe3+ fluorescent probes in the environment.

Two spirobifluene-based turn-on fluorescent probes for highly selective detection of Cysteine and the applications in cells two-photon fluorescence imaging

Two spirobifluene-based fluorescent probes SPF1 and SPF2, were designed and synthesized. The probes displayed "turn-on" fluorescence response for Cysteine. One of the challenges in developing a Cysteine probe is to secure high selectivity. SPF1/SPF2 can discriminate Cysteine from GSH as well as Hcy, and showed high substrate selectivity. The detection limit of SPF1 is 36 nM, which is excellent comparing with other optical sensors for Cysteine. The sensing mechanism of SPF1/SPF2 was verified by experimental data and theoretical calculations. There was a good linear relationship between the fluorescence intensity of SPF1/SPF2 and the concentration of Cysteine. The MTT tests indicated that SPF1/SPF2 had low cytotoxicity and good biocompatibility. Theoretical calculations demonstrated that SPF1, SPF2, and their related reaction products with Cysteine exhibited good two-photon absorption properties. Finally, SPF1/SPF2 had been successfully applied to the imaging of Cysteine in living cells under two-photon excitation.

A V-shaped bis-coumarin based fluorescence probe for F- detection in tea infusions and potable water and bioimaging applications in living systems

Fluorine (F) is a pivotal element in the formation of human dental and skeletal tissues, and the consumption of water and tea constitutes a significant source of fluoride intake. However, prolonged ingestion of water and tea with excessive fluoride content can lead to fluorosis, which poses a serious health hazard. In this manuscript, a novel turn-on fluorescent probe DCF synthesized by bis-coumarin and tert-butyldiphenylsilane (TBDPS) was introduced for detecting F- in potable water and tea infusions. By leveraging the unique chemical affinity between fluoride and silicon, F- triggers the silicon-oxygen bond cleavage in DCF, culminating in a conspicuous emission of yellow fluorescence. Validated through a succession of optical tests, this probe exhibits remarkable advantages in terms of superior selectivity, a low detection limit, a large Stokes shift, and robust interference resistance when detecting inorganic fluoride. Moreover, it can serve as portable test strips for on-site real-time identification and quantitative analysis of F-. Furthermore, the application of DCF for in-situ monitoring and imaging of F- in zebrafish and soybean root tissues proved its significant value for F- detection in both animal and plant systems. This probe potentially functions as an efficient instrument for delving into the toxic mechanisms of fluoride in physiological processes.

Turn-on fluorescence of mirabegron for its sensitive detection in human plasma: Box-Behnken-Design for optimization

Here, a novel fluorescence strategy was established for the detection of mirabegron (MBG) sensitively on the basis of hantzsch dihydropyridine synthesis. The developed method adopts turn-on fluorescence of MBG for the first time, permitting its selective determination in spiked human plasma at 486 nm after excitation at 410 nm. The developed method exhibited a good linear range from 0.5 μgmL-1 to 2.0 μgmL-1 with detection and quantification limits of 0.05 and 0.2 (μgmL-1), respectively. The profitable applicability of the developed method in spiked human plasma samples was demonstrated, achieving limit of detection below the previously levels reported by spectroscopic methods, allowing application of the developed method for selective determination of MBG in its tablets and spiked human plasma samples with good recovery.

Fabrication of a ratiometric fluorescent probe based on Tb3+ doped dual-emitting carbon dots for the detection of cytochrome c

Cytochrome c (Cyt-c) was commonly an intrinsic biomarker for a variety of cellular characteristics, such as respiration, energy levels, and apoptosis. Herein, a simple fluorescence sensor was constructed for the detection of Cyt-c in buffer and real serum samples. The carbon dots doped with Tb3+ on the premise of 1-(2-pyridylazo)-2-naphthol (PAN) were fabricated and used as a dual-emission ratiometric fluorescent probe for detecting Cyt-c based on the internal filtering effect (IFE). As a fluorescent probe for ultra-sensitive detection, Cyt-c was quantitatively detected at different concentrations from 1 to 1000 nM. The fluorescent detection method for Cyt-c showed a good linear relationship from 1 to 50 nM, and the limit of detection (LOD) was 0.35 nM. In the recovery range of 101.27-103.39 % in human serum samples, the relative standard deviation (RSD) was less than 3.27 % (n = 3). In the end, the possible structures of CDs were predicted by DFT theoretical simulation calculations. All the results proved the ability of carbon dots as fluorescent probes to detect biomarkers and the application prospects in bioanalysis.

Conjugated molecularly imprinted polymers based on covalent organic frameworks: Fluorescent sensing platform for specific capture of urea and elimination of ethyl carbamate

This study described the preparation of an azide covalent organic framework-embedded molecularly imprinted polymers (COFs(azide)@MIPs) platform for urea adsorption and indirect ethyl carbamate (EC) removal from Chinese yellow rice wine (Huangjiu). By modifying the pore surface of COFs using the copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, COFs(azide) with a high fluorescence quantum yield and particular recognition ability were inventively produced. In order to selectively trap urea, the COFs(azide) were encased in an imprinted shell layer via imprinting technology. With a detection limit (LOD) of 0.016 μg L-1 (R2 = 0.9874), the COFs(azides)@MIPs demonstrated a good linear relationship with urea in the linear range of 0-5 μg L-1. Using real Huangjiu samples, the spiking recovery trials showed the viability of this sensing platform with recoveries ranging from 88.44 % to 109.26 % and an RSD of less than 3.40 %. The Huangjiu processing model system achieved 38.93 % EC reduction by COFs(azides)@MIPs. This research will open up new avenues for the treatment of health problems associated with fermented alcoholic beverages, particularly Huangjiu, while also capturing and removing hazards coming from food.

The highly selective and sensitive fluorescence probe for detection of copper (II) ions and its bioimaging in vitro and vivo

We designed and developed the probe W-3 for detection of Cu2+. The results showed probe can selectively detect Cu2+, accompanied by noticeable color change. The probe can detect the Cu2+ in water samples and drinks based on absorption detection. In addition, the combination of portable test paper and the smartphone platform obtained great convenience for on-site and visual detection of Cu2+, with satisfactory sensitivity and reliability. More importantly, the fluorescence probe W-3 can be used for the detection of Cu2+ in cells and mice. Therefore, the W-3 provided potential chemical tools for detecting Cu2+ in vitro and vivo.

An asynchronous response fluorescence sensor combines machine learning theory to qualitatively and quantitatively detect tetracyclines

Excess use of tetracyclines poses significant health risks arising from animal-derived foods, meaning simple and sensitive methods to detect tetracyclines would be beneficial given current laboratory methods are complex and expensive. Herein, we describe an asynchronous response fluorescence sensor constructed based on Zn-based metal-organic framework and Ru(bpy)32+ (denoted as Ru@Zn-BTEC) for the qualitative and quantitative detection of tetracyclines in foods. Under excitation at 365 nm, the sensor emitted red fluorescence at 609 nm. When tetracyclines were present, these molecules aggregated in the Ru@Zn-BTEC framework, causing green fluorescence emission at 528 nm. The developed sensing system accurately distinguished the different categories of tetracyclines with a classifier accuracy of 94 %. The Ru@Zn-BTEC sensor demonstrated a detection limit of 0.012 μM and satisfactory recovery (87.81 %-113.84 %) for tetracyclines in food samples. This work provides a pathway for constructing asynchronous response fluorescence sensors for food analysis.

Rapid visual detection of sulfur dioxide residues in food using acid-sensitive CdTe quantum dots-loaded alginate hydrogel beads

Acid-sensitive CdTe quantum dots-loaded alginate hydrogel (CdTe QDs-AH) beads were designed for the visual detection of SO2 residues. As proof of concept, two types of CdTe QDs were selected as model probes and embedded in AH beads. The entire test was performed within 25 min in a modified double-layer test tube with one bead fixed above the sample solution. Adding citric acid and heating at 70 ℃ for 20 min transformed the sulfites in the solution into SO2 gas, which then quenched the fluorescence of the CdTe QDs-AH beads. Using this assay, qualitative, naked-eye detection of SO2 residues was achieved in the concentration range of 25-300 ppm, as well as precise quantification was possible based on the difference in the average fluorescence brightness of the beads before and after the reaction. Five food types were successfully analysed using this method, which is simpler and more economical than existing methods, and does not require complex pretreatment.

Simple enzyme based fluorimetric biosensor for urea in human biofluids

As an important biomarker for renal related diseases, detection of urea is playing a vital role in human biofluids on clinical diagnosis concern. In this work, a synthetic salicyaldehyde based imine fluorophore was synthesized using sonication method and conjugated with urease which was used as fluorescent biosensor for the detection of urea in serum samples. This enzyme based biosensor has shown a good selectivity and sensitivity towards urea with the linear range from 2 to 80 mM and the detection limit of 73 µM. The sensing response obtain is highly agreeing with existing analytical technique for urea detection which strongly recommends this biosensor for clinical application.

Nitrogen-doped carbon quantum dots as dual mode fluorescence sensors for the determination of food colorant quinoline yellow

Quinoline yellow (QY), as a food coloring agent, will consume a large number of detoxifying substances in the body after being ingested by the human body, interfering with the normal metabolic functions of the human body, and may cause allergies, diarrhea and other symptoms, as well as a certain degree of carcinogenicity, posing a great threat to human health. As a result, it is critical to develop a fast, sensitive, and effective approach to determining quinoline yellow in food. In this study, carbon dots (N-CQDs) with high fluorescence quantum yield were prepared and used to determine the QY content using the dual mode of internal filtering effect and fluorescence emission shift detection. Both methods showed good linearity in the range of QY concentration of 0.3-3.2 μM, and the detection limits were classified as 2.6 nM and 0.18 μM. In addition, in order to achieve visual detection of QY, fluorescent test strips were constructed using the carbon dots and non-fluorescent qualitative filter paper to make the detection of QY more convenient. This probe presents a novel way for detecting quinoline yellow in food analysis.

An off-on fluorescence method for acid phosphatase assay based on the inner filter effect of MnO2 nanosheets on vitamin B2

Fluorescence analysis has attracted much attention due to its rapidity and sensitivity. The present work describes a novel fluorescence detection method for acid phosphatase (ACP) on the basis of inner-filter effect (IFE), where MnO2 nanosheets (MnO2 NSs) and vitamin B2 (VB2) are served as absorbers and fluorophores, respectively. In the absence of ACP, the absorption band of MnO2 NSs overlaps well with the excitation band of VB2, resulting in effective IFE and inhibition of VB2 fluorescence. In the presence of ACP, 2-phospho-L-ascorbic acid trisodium salt (AAP) is hydrolyzed to generate ascorbic acid (AA), which efficiently trigger the reduction of MnO2 NSs into Mn2+ ions, causing the weakening of the MnO2 NSs absorption band and the recovery of VB2 fluorescence. Further investigation indicates that the fluorescence recovery degree of VB2 increases with the increase of ACP concentration. Under selected experimental conditions, the proposed method can achieve sensitive detection of ACP in the ranges of 0.5-4.0 mU/mL and 4.0-15 mU/mL along with a limit of detection (LOD) as low as 0.14 mU/mL. Finally, this method was successfully applied for the detection of ACP in human serum samples with satisfactory recoveries in the range of 95.0 %-108 %.

A novel fluorescent probe based imprinted polymer-coated magnetite for the detection of imatinib leukemia anti-cancer drug traces in human plasma samples

Myeloid leukemia is a chronic cancer, which associated with abnormal BCR-ABL tyrosine kinase activity. Imatinib (IMB) acts as a tyrosine kinase inhibitor and averts tumor growth in cancer cells by controlling cell division, so it is urgent to develop an effective assay to detect and monitor its IMB concentration. Therefore, an innovative fluorescent biomimetic sensor is a promising sensing material that constructed for the efficient recognition of IMB and displays excellent selectivity and sensitivity stemming from molecularly imprinted polymer@Fe3O4 (MIP@Fe3O4). The detection strategy depends on the recognition of IMB molecules at the imprinted sites in the presence of coexisting molecules, which are then transferred to the fluorescence signal. The synthesized MIP@Fe3O4 was characterized using Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Furthermore, computational studies of the band gap (EHOMO-ELUMO) of the monomers, IMB, and their complexes were performed. These results confirmed that the copolymer is the most appropriate and has high stability (Binding energy; 0.004 x 10-19 KJ) and low reactivity. A comprehensive linear response over IMB concentrations from 5 × 10-6 mol/L to 8 × 10-4 mol/L with a low detection limit of 9.3 × 10-7 mol/L was achieved. Furthermore, the proposed technique displayed long-term stability (over 2 months), high intermediate precision (RSD<2.1 %), good reproducibility (RSD <1.9 %), and outstanding selectivity toward IMB over analogous molecules with similar chemical and spatial structure (no interference by 100 to 150-fold of the competitors). Owing to these merits, the proposed fluorescence sensor was utilized to detect IMB in drug tablets and human plasma, and satisfactory results (99.3-100.4 %) were obtained. Thus, the synthesized fluorescence sensor is a promising platform for IMB sensing in various applications.

Development of a fluorescent scaffold by utilizing quercetin template for selective detection of Hg2+: Experimental and theoretical studies along with live cell imaging

Quercetin is an important antioxidant with high bioactivity and it has been used as SARS-CoV-2 inhibitor significantly. Quercetin, one of the most abundant flavonoids in nature, has been in the spot of numerous experimental and theoretical studies in the past decade due to its great biological and medicinal importance. But there have been limited instances of employing quercetin and its derivatives as a fluorescent framework for specific detection of various cations and anions in the chemosensing field. Therefore, we have developed a novel chemosensor based on quercetin coupled benzyl ethers (QBE) for selective detection of Hg2+ with "naked-eye" colorimetric and "turn-on" fluorometric response. Initially QBE itself exhibited very weak fluorescence with low quantum yield (Φ = 0.009) due to operating photoinduced electron transfer (PET) and inhibition of excited state intramolecular proton transfer (ESIPT) as well as intramolecular charge transfer (ICT) within the molecule. But in presence of Hg2+, QBE showed a sharp increase in fluorescence intensity by 18-fold at wavelength 444 nm with high quantum yield (Φ = 0.159) for the chelation-enhanced fluorescence (CHEF) with coordination of Hg2+, which hampers PET within the molecule. The strong binding affinity of QBE towards Hg2+ has been proved by lower detection limit at 8.47 µM and high binding constant value as 2 × 104 M-1. The binding mechanism has been verified by DFT study, Cyclic voltammograms and Jobs plot analysis. For the practical application, the binding selectivity of QBE with Hg2+ has been capitalized in physiological medium to detect intracellular Hg2+ levels in living plant tissue by using green gram seeds. Thus, employing QBE as a fluorescent chemosensor for the specific identification of Hg2+ will pave the way for a novel approach to simplifying the creation of various chemosensors based on quercetin backbone for the precise detection of various biologically significant analytes.

Near-infrared Rhodols-based fluorescent probe with large Stokes shift for tracking of H2S in food spoilage and living cells

Hydrogen sulfide (H2S), as a biomarker signaling gas, is not only susceptible to food spoilage, but also plays a key function in many biological processes. In this work, an activated near infrared (NIR) H2S fluorescent probe was designed and synthesized with quinoline-conjugated Rhodols dye as fluorophore skeleton and a dinitrophenyl group as the responsive moiety. Due to the quenching effect of dinitrophenyl group and the closed-loop structure of Rhodols fluorophore, probe itself has a very weak absorption and fluorescence background signal. After the H2S-induced thiolysis reaction, the probe exhibits a remarkable colormetric change and NIR fluorescent enhancement response at 716 nm with large Stokes shift (116 nm), and possesses high sensing selectivity and sensitivity with a low detection limits of 330 nM. The response mechanism is systematically characterized by 1H NMR, MS and DFT calculations. The colorimetric change allows the probe to be used as a test strips to detect H2S in food spoilage, while NIR fluorescent response helps the probe monitor intracellular H2S.

Synchronous spectrofluorimetry and chemometric modeling: A synergistic approach for analyzing simeprevir and daclatasvir, with application to pharmacokinetics evaluation

Simeprevir and daclatasvir represent a cornerstone in the management of Hepatitis C Virus infection, a global health concern that affects millions of people worldwide. In this study, we propose a synergistic approach combining synchronous spectrofluorimetry and chemometric modeling i.e. Partial Least Squares (PLS-1) for the analysis of simeprevir and daclatasvir in different matrices. Moreover, the study employs firefly algorithms to further optimize the chemometric models via selecting the most informative features thus improving the accuracy and robustness of the calibration models. The firefly algorithm was able to reduce the number of selected wavelengths to 47-44% for simeprevir and daclatasvir, respectively offering a fast and sensitive technique for the determination of simeprevir and daclatasvir. Validation results underscore the models' effectiveness, as evidenced by recovery rates close to 100% with relative root mean square error of prediction (RRMSEP) of 2.253 and 2.1381 for simeprevir and daclatasvir, respectively. Moreover, the proposed models have been applied to determine the pharmacokinetics of simeprevir and daclatasvir, providing valuable insights into their distribution and elimination patterns. Overall, the study demonstrates the effectiveness of synchronous spectrofluorimetry coupled with multivariate calibration optimized by firefly algorithms in accurately determining and quantifying simeprevir and daclatasvir in HCV antiviral treatment, offering potential applications in pharmaceutical formulation analysis and pharmacokinetic studies for these drugs.

Aggregation-induced-emission red carbon dots for ratiometric sensing of norfloxacin and anti-counterfeiting

The detection of trace antibiotic residues holds significant importance because it's related to food safety and human health. In this study, we developed a new high-yield red-emitting carbon dots (R-CDs) with aggregation-induced emission properties for ratiometric sensing of norfloxacin. R-CDs were prepared in 30 min using an economical and efficient microwave-assisted method with tartaric acid and o-phenylenediamine as precursors, achieving a high yield of 34.4 %. R-CDs showed concentration-dependent fluorescence and aggregation-induced-emission properties. A ratiometric fluorescent probe for detecting the norfloxacin was developed. In the range of 0-40 μM, the intensity ratio of two emission peaks (I445 nm/I395 nm) towards norfloxacin show good linear relationship with its concentrations and a low detection limit was obtained (36.78 nM). In addition, complex patterns were developed for anti-counterfeiting based on different emission phenomenon at different concentrations. In summary, this study designed a novel ratiometric fluorescent probe for detection of norfloxacin, which greatly shortens the detection time and improves efficiency compared with high-performance liquid chromatography and other methods. The study will promote the application of carbon dots in anti-counterfeiting and other related fields, laying the foundation for the preparation of low-cost photosensitive anti-counterfeiting materials.

Smartphone-based dual inverse signal MOFs fluorescence sensing for intelligent on-site visual detection of malachite green

The development of intelligent, sensitive, and visual methods for the rapid detection of veterinary drug residues is essential to ensure food quality and safety. Here, a smartphone-based dual inverse signal MOFs fluorescence sensing system was proposed for intelligent in-site visual detection of malachite green (MG). A UiO-66-NH2@RhB-dual-emission fluorescent probe was successfully synthesized in one step using a simple one-pot method. The inner filter effect (IFE) quenches the red fluorescence, while hydrogen bonding interaction enhances the blue fluorescence, enabling highly sensitive, accurate, and visual detection of MG dual inverse signals through fluorescence analysis. The probe showed great linearity over a wide range of 0.1-100 μmol/L, with a limit of detection (LOD) of 20 nmol/L. By integrating smartphone photography and RGB (red, green, and blue) analysis, accurate quantitative analysis of MG in water and actual fish samples can be achieved within 5 min. This developed platform holds great promise for the on-site detection of MG in practical applications, with the advantages of simplicity, cost-effectiveness, and rapidity. Consequently, it may open up a new pathway for on-site evaluation of food safety and environmental health.

UIO66 low background signal and fluorescence synergism strategy for highly sensitive detection of Salmonella typhimurium

Successful construction of a detection method for Salmonella typhimurium (S. typhimurium) based on the synergy of hybridization chain reaction (HCR) and fluorescence was realized in this paper. First, the aptamer modified with the quenching group Black Hole Quencher-1 acid (BHQ1) was immobilized on the magnetic beads in combination with the complementary chain of the aptamer modified with 6-carboxyfluorescein (6-FAM). Second, S. typhimurium and cDNA-6-FAM immobilized on magnetic beads competitively bound to the aptamer. Finally, the cDNA-6-FAM was released after magnetic separation acted as a promoter to trigger HCR amplification when the target presented. The fluorescence signal could be significantly improved by the combination of green SYBR Green I (SGI) and HCR long double-stranded DNA and the fluorescent synergy of 6-FAM and SGI. Because of the separation of target and its aptamer, the trigger strand was abstracted by magnetic separation. There was no HCR to generate long double-stranded DNA, and the fluorescence of excess hairpin/SGI could be adsorbed through UIO66 so that only a very low background signal was detected. This fluorescent sensor was capable of monitoring S. typhimurium in the range of 10-3.2 × 107 CFU mL-1 with a limit of detection as low as 1.5 CFU mL-1. Because of the excellent properties of the aptasensor and the validity of SGI fluorescence synergy, this HCR enzyme-free amplification strategy could be generalized to other areas.

Natural flavonols as probes for direct determination of borax: From conventional fluorescence analysis to paper-based smartphone sensing

Borax is strictly regulated in the food processing and pharmaceutical industry due to its physiological toxicity, and the development of a direct analytical method is essential for effectively monitoring the borax abuse. In this work, the fluorescence properties of flavonoids, including flavones, isoflavones and flavonols, were systematically investigated from aqueous to borax solutions, and it was found that the weak intrinsic fluorescence of flavonols could be pervasively sensitized by borax. A natural flavonol, morin, was subsequently chosen as a representative probe to develop a turn-on fluorescence sensing method for borax analysis, which achieved a linear response spanning four orders of magnitude with a detection limit of 1.07 μM (0.22 μg mL-1 in terms of Na2B4O7 content). Furthermore, a smartphone-assisted paper-based test device was designed and constructed by 3D printing technology. Using morin-impregnated test strips as the carrier, the borax could be visually detected by the RGB signals of the captured images, with a detection limit of 0.13 mM (27.05 μg mL-1 for Na2B4O7). Combining ion exchange treatment for food samples and sodium periodate oxidation for drug samples, the developed methods were successfully applied for the direct analysis of borax in various products with the recoveries of 86.9-106.3% for traditional fluorescence analysis and 82.7-108.8% for smartphone-assisted fluorescence sensing. The fluorescence property of the morin-borax system was studied using time-dependent density functional theory, and the sensing mechanism was discussed in conjunction with experimental research.

CdTe based water-soluble fluorescent probe for rapid detection of zilpaterol in swine urine and pork

Zilpaterol hydrochloride (zilpaterol) is used in animal feed as it can increase the lean meat mass. However, consuming zilpaterol-containing animal products may damage human health. Therefore, rapid detection of zilpaterol is attracting increasing research attention. This study aimed to developed a fast, accurate, and ultrasensitive fluorescence immunoassay based on CdTe quantum dots (QDs). A CdTe QD fluorescence sensor was synthesized from thioglycolic acid using a simple hydrothermal method. The morphology and structure of the CdTe QDs were characterized using transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy. The detection limits of our method in swine urine and pork samples were 0.5 μg/L and 1.2 μg/kg, respectively. A wide linear range of 0.1-10000 μg/L (R2 = 0.996) was achieved. Both within-run precision (CVw) and between-run precision (CVb) were ≤ 10 %. The method was then successfully applied for the analysis of zilpaterol contents in swine urine and pork samples.

Joint forces of mass spectrometric techniques (ICP-MS and MALDI-TOF-MS) and fluorescence spectrometry in the study of platinum-based cytostatic drugs interactions with metallothionein MT2 and MT3

Herby, the interaction of metallothioneins with commonly used Pt-based anticancer drugs - cisplatin, carboplatin, and oxaliplatin - was investigated using the combined power of elemental (i.e. LA-ICP-MS, CE-ICP-MS) and molecular (i.e. MALDI-TOF-MS) analytical techniques providing not only required information about the interaction, but also the benefit of low sample consumption. The amount of Cd and Pt incorporated within the protein was determined for protein monomers and dimer/oligomers formed by non-oxidative dimerization. Moreover, fluorescence spectrometry using Zn2+-selective fluorescent indicator - FluoZin3 - was employed to monitor the ability of Pt drugs to release natively occurring Zn from the protein molecule. The investigation was carried out using two protein isoforms (i.e. MT2, MT3), and significant differences in behaviour of these two isoforms were observed. The main attention was paid to elucidating whether the protein dimerization/oligomerization may be the reason for the potential failure of the anticancer therapy based on these drugs. Based on the results, it was demonstrated that the interaction of MT2 (both monomers and dimers) interacted with Pt drugs significantly less compared to MT3 (both monomers and dimers). Also, a significant difference between monomeric and dimeric forms (both MT2 and MT3) was not observed. This may suggest that dimer formation is not the key factor leading to the inactivation of Pt drugs.

Ratio-fluorescence detection of tert-butylhydroquinone based on non-conjugated polymer dots and gold nanoclusters

A novel ratiometric fluorescent probe based on non-conjugated polymer dots (NCPDs) and gold nanocluster (AuNCs) was constructed to determine tert-butylhydroquinone (TBHQ). The probe exhibited dual emission peaks at 480 nm and 630 nm under 370 nm excitation. The fluorescence of AuNCs was quenched by TBHQ due to strong electrostatic interactions, whereas the emission of NCPDs increased. The ratio of fluorescence intensity at 480 nm to 630 nm (F480 / F630) was monitored as analytical signal response. The probe have been utilized for the detection of TBHQ with good linear relationship in the range of 0.2 to 60 μg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 0.048 μg/mL and 0.159 μg/L, respectively. Three levels of spiked-in TBHQ concentrations were obtained with recovery rates from 80 % to 102 %. The present study provided an effective ratiometric fluorescence method for selective screening of TBHQ in food samples.

A combined experimental and theoretical approach for doxycycline sensing using simple fluorescent probe with distinct fluorescence change in wide range of interferences

Overuse of doxycycline (DOXY) can cause serious problems to human health, environment and food quality. So, it is essential to develop a new sensing methodology that is both sensitive and selective for the quantitative detection of DOXY. In our current research, we synthesized a simple fluorescent probe 4,4'-bis(benzyloxy)-1,1'-biphenyl (BBP) for the highly selective detection of doxycycline by through fluorescence spectroscopy. The probe BBP displayed ultra-sensitivity towards doxycycline due to Forster resonance energy transfer (FRET). Fluorescence spectroscopy, density functional theory (DFT), 1H NMR titration, UV-Vis, and Job's plot were used to confirm the sensing mechanism. The charge transfer between the probe and analyte was further examined qualitatively by electron density differences (EDD) and quantitively by natural bond orbital (NBO) analyses. Whereas the non-covalent nature of probe BBP towards DOXY was verified by theoretical non-covalent interaction (NCI) analysis as along with Bader's quantum theory of atoms in molecules (QTAIM) analysis. Furthermore, probe BBP was also practically employed for the detection of doxycycline in fish samples, pharmaceutical wastewater and blood samples.

Biophysical characterization and design of a minimal version of the Hoechst RNA aptamer

RNA aptamers are oligonucleotides, selected through Systematic Evolution of Ligands by EXponential Enrichment (SELEX), that can bind to specific target molecules with high affinity. One such molecule is the RNA aptamer that binds to a blue-fluorescent Hoechst dye that was modified with bulky t-Bu groups to prevent non-specific binding to DNA. This aptamer has potential for biosensor applications; however, limited information is available regarding its conformation, molecular interactions with the ligand, and binding mechanism. The study presented here aims to biophysically characterize the Hoechst RNA aptamer when complexed with the t-Bu Hoechst dye and to further optimize the RNA sequence by designing and synthesizing new sequence variants. Each variant aptamer-t-Bu Hoechst complex was evaluated through a combination of fluorescence emission, native polyacrylamide gel electrophoresis, fluorescence titration, and isothermal titration calorimetry experiments. The results were used to design a minimal version of the aptamer consisting of only 21 nucleotides. The performed study also describes a more efficient method for synthesizing the t-Bu Hoechst dye derivative. Understanding the biophysical properties of the t-Bu Hoechst dye-RNA complex lays the foundation for nuclear magnetic resonance spectroscopy studies and its potential development as a building block for an aptamer-based biosensor that can be used in medical, environmental or laboratory settings.

Machine learning-assisted chromium speciation using a single-well ratiometric fluorescent nanoprobe

Chromium is widely recognized as a significant pollutant discharged into the environment by various industrial activities. The toxicity of this element is dependent on its oxidation state, making speciation analysis crucial for monitoring the quality of environmental water and assessing the potential risks associated with industrial waste. This study introduces a single-well fluorometric sensor that utilizes orange emissive thioglycolic acid stabilized CdTe quantum dots (TGA-QDs) and blue emissive carbon dots (CDs) to detect and differentiate between various chromium species, such as Cr (III) and Cr (VI) (i.e., CrO42- and Cr2O72-). The variations of fluorescence spectra of the proposed probe upon chromium species addition were analyzed using machine learning techniques such as linear discriminant analysis and partial least squares regression as a classification and multivariate calibration technique, respectively. Linear discriminant analysis (LDA) demonstrated exceptional accuracy in differentiating single-component and bicomponent samples. Additionally, the findings from the partial least squares regression (PLSR) showed that the sensor created has strong linearity within the 1.0-100.0, 1.0-100.0, and 0.1-15 μM range for Cr2O72-, CrO42-, and Cr3+, respectively. Furthermore, appropriate detection limits were successfully achieved, which were 2.6, 2.9, and 0.7 μM for Cr2O72-, CrO42-, and Cr3+, respectively. Ultimately, the successful capability of the sensing platform in the identification and quantification of chromium species in environmental water samples provides innovative insights into general speciation analytics.

A new carbazole based fluorescent probe with AIE characteristic for detecting and imaging hydrazine in living cells, mungbean sprouts, Arabidopsis thaliana, and practical samples

In this study, we report a new carbazole-malononitrile fluorescent probe CBC with an interesting aggregation-induced emission (AIE) characteristic. Probe CBC could rapidly and selectively detect hydrazine (N2H4) in ～100% aqueous media, and also exhibit an exceedingly low detection limit of 6.3 nM for sensitively detecting N2H4. The sensing mechanism of CBC towards N2H4 has been well demonstrated through the spectra of 1H NMR, HRMS and FTIR. Interestingly, probe CBC was applied to visualize and detect gaseous and aqueous N2H4 with sensitive color changes. Importantly, probe CBC was applied to effectively detect N2H4 in practical samples such as soil, human serum, human urine, plants, foods and beverages, as well as sensitively sense and image N2H4 in biological systems including living mungbean sprouts, Arabidopsis thaliana, and HeLa cells.

A novel method for determination of peroxide value and acid value of extra-virgin olive oil based on fluorescence internal filtering effect correction

Peroxide value (PV) and acid value (AV) are widely used indicators for evaluating oxidation degree of olive oils. Fluorescence spectroscopy has been extensively studied on the detection of oil oxidation, however, the detection accuracy is limited due to internal filtering effect (IFE). Due to the primary and secondary IFE, at least two wavelengths of absorption information are required. Least squares support vector regression (LSSVR) models for PV and AV were established based on two absorption coefficients (μa) at 375 nm and emission wavelength and one fluorescence intensity at corresponding wavelength. The regression results proved that the model based on 375 and 475 nm could reach the best performance, with the highest correlation coefficient for prediction (rp) of 0.889 and 0.960 for PV and AV respectively. Finally, the explicit formulations for PV and AV were determined by nonlinear least squares fitting, and the rp could reach above 0.94 for two indicators.

Novel fluorescence strategy based on G-quadruplex structure-switching aptamer for enrofloxacin detection in food and environmental samples

Enrofloxacin (ENR) is widely used in the prevention and treatment of animal infectious diseases, so it is necessary to strengthen the residue detection of this drug in animal-derived food and water environments. In this work, for the first time, we engineered assembly a split ENR aptamer into the G-quadruplex (G4) region to form a new aptamer (G4-ENRA) that provides a more sensitive signal-reporting function while retaining target-specific recognition ability of the aptamer. This rational design effectively overcomes the issue of difficulty in identification probe development. Under the optimized conditions, a response range of 0.05-20 µM and limit of detection of 26.7 nM were obtained by directly detecting fluorescence signals, displaying a comparative advantage over the previously reported methods. Moreover, this method demonstrated satisfactory performance for the ENR detection in various real food and environmental samples, with the detection recoveries ranging from 95.87 % to 104.36 %, illustrating promising applicability prospects.

Salicylaldehyde built fluorescent probe for dual sensing of Al3+, Zn2+ ions: Applications in latent fingerprint, bio-imaging & real sample analysis

This Schiff base chemosensor (SNN) detected dual ions, Al3+ and Zn2+ ions selectively. Fluorescence spectrum investigations showed that Al3+ ions increased fluorescence intensity, notably at 493 nm. Introducing Zn2+ ions caused a significant blue shift of roughly ∼65 nm at a wavelength of 434 nm, resulting in a notable change in fluorescence intensity. When binding Al3+/Zn2+ ions, the SNN receptor uses three methods. Inhibition of photoinduced electron transfer (PET), excited state intramolecular proton transfer (ESIPT), and restriction of CN isomerization. The jobs plot method found that SNN + Al3+ and SNN + Zn2+ complexations had a 1:1 stoichiometry. DFT, LC-HRMS, and 1H NMR titration confirm this conclusion. The probe SNN's limit of detection (LOD) for Al3+/Zn2+ ions was 3.99 nM and 1.33 nM. Latent fingerprint (LFP), food samples, pharmaceutical products, and E. coli pathogen bio-imaging have all used the SNN probe to identify Al3+ and Zn2+ ions.

Plasmon-enhanced fluorescence combined with aptamer sensor based on Ag nanocubes for signal-amplified detection of berberine hydrochloride

Plasmon enhanced fluorescent (PEF) with more "hot spots" play a critical role in signal amplified technology to avoid the intrinsic limitation of fluorophore which ascribed to a strong electromagnetic field at the tip structure. However, application of PEF technique to obtain a highly sensitive analysis of medicine was still at a very early stage. Herein, a simple but versatile Ag nanocubes (Agcubes)-based PEF sensor combined with aptamer (Agcubes@SiO2-QDs-Apt) was proposed for highly sensitive detection of berberine hydrochloride (BH). The distance between the plasma Agcubes and the red-emitted CdTe quantum dots (QDs) were regulated by the thickness of silica spacer. The three-dimensional finite-difference time-domain (3D-FDTD) simulation further revealed that Agcubes have a higher electromagnetic field than Ag nanospheres. Compared with PEF sensor, signal QDs-modified aptamer without Agcubes (QDs-Apt) showed a 10-fold higher detection limit. The linear range and detection limit of the Agcubes@SiO2-QDs-Apt were 0.1-100 μM, 87.3 nM, respectively. Furthermore, the PEF sensor was applied to analysis BH in the berberine hydrochloride tablets, compound berberine tablet and urine with good recoveries of 98.25-102.05%. These results demonstrated that the prepared PEF sensor has great potential for drug quality control and clinical analysis.

The quantification of southern corn leaf blight disease using deep UV fluorescence spectroscopy and autoencoder anomaly detection techniques

Southern leaf blight (SLB) is a foliar disease caused by the fungus Cochliobolus heterostrophus infecting maize plants in humid, warm weather conditions. SLB causes production losses to corn producers in different regions of the world such as Latin America, Europe, India, and Africa. In this paper, we demonstrate a non-destructive method to quantify the signs of fungal infection in SLB-infected corn plants using a deep UV (DUV) fluorescence spectrometer, with a 248.6 nm excitation wavelength, to acquire the emission spectra of healthy and SLB-infected corn leaves. Fluorescence emission spectra of healthy and diseased leaves were used to train an Autoencoder (AE) anomaly detection algorithm-an unsupervised machine learning model-to quantify the phenotype associated with SLB-infected leaves. For all samples, the signature of corn leaves consisted of two prominent peaks around 450 nm and 325 nm. However, SLB-infected leaves showed a higher response at 325 nm compared to healthy leaves, which was correlated to the presence of C. heterostrophus based on disease severity ratings from Visual Scores (VS). Specifically, we observed a linear inverse relationship between the AE error and the VS (R2 = 0.94 and RMSE = 0.935). With improved hardware, this method may enable improved quantification of SLB infection versus visual scoring based on e.g., fungal spore concentration per unit area and spatial localization.

Integration of a facile sustainable resonance Rayleigh scattering switchable-based system for feasible determination of centrophenoxine, a nootropic and antioxidant agent; application to crude materials and dosage forms

The proposed research adheres to a certain methodology to ensure that the technique used for analyzing the centrophenoxine drug is sustainable and green. It is important to highlight that several tools that have been recently developed were utilized as potential indicators of environmental sustainability and applicability. The present research presents a novel and entirely innovative method utilizing ultrasensitive spectrofluorimetry for the detection of centrophenoxine (CPX) drug. The employed methodology in this study involved the utilization of one-step, one-pot, and direct spectrofluorimetric technique, which was found to be both efficient and environmentally sustainable in the validation and assessment of the drug. Simply, when CPX and erythrosine B reagent were combined in an acidic environment, the highly resonance Rayleigh scattering product was immediately produced. The sensitivity limits were observed to be within the range of 15-47 ng mL-1, whereas the linearity was assessed to be in the range of 50-2000 ng mL-1. The optimal settings for all modifiable parameters of the system were ascertained through an analysis of centrophenoxine-erythrosine B complexes. Moreover, the system demonstrated compliance with International Council for Harmonization (ICH) specifications without encountering any issues. The suggested process was then rated on different recent environmental safety measuring metrics to see how good it was for the environment. Fortunately, the WAC standards that combine ecological and functional elements utilizing the Green/Red/Blue (RGB 12) design also acclaimed the current analytical technique as a white one. Additionally, a new applicability evaluation tool (BAGI) was employed to estimate the practicability of the planned method in the analytical chemistry field.

Fluorescent ovalbumin-functionalized gold nanocluster as a highly sensitive and selective sensor for relay detection of salicylaldehyde, Hg(II) and folic acid

A sensitive and selective relay-based scheme for the detection of salicylaldehyde, Hg2+, and folic acid (FA) has been demonstrated using fluorescent ovalbumin functionalized gold nanoclusters (OVA-AuNCs, λem = 655 nm) in this article. The OVA-AuNCs were conjugated to salicylaldehyde via an imine linkage to form Salic_OVA-AuNCs conjugate. The molecular docking study reveals that multiple functional groups and amino acid residues are involved in the interaction between salicylaldehyde and the OVA-AuNCs. The coupling of salicylaldehyde with OVA-AuNCs results in fluorescence quenching at 655 nm and concomitant formation of an emission band at 500 nm, which have leveraged to detect salicylaldehyde down to 2.02 µM. Following that, the Salic_OVA-AuNCs has been used for the detection of Hg2+ and FA. Several processes, such as internal charge transfer (ICT), photoinduced electron transfer (PET) and metallophilic interactions, are involved between the Salic_OVA-AuNCs nanoprobe and the analytes, which allowed to detect Hg2+ and FA down to 0.13 nM and 0.11 nM, respectively. The Salic_OVA-AuNCs nanoprobe has an additional naked-eye utility when applied to paper-strip sensing strategy for Hg2+ and FA detection.

Catalytic hairpin self-assembly amplification fluorescence detection of chloramphenicol based on cross-shaped DNA and UiO-66

A catalytic hairpin self-assembly (CHA) amplification method was developed for CAP detection based on cross-shaped DNA and UiO-66. MOF was used to quench the fluorescent signal of FAM labeled DNA. Cross-shaped DNA with four fluorophore group (FAM) was utilized to enhance the fluorescent intensity. CAP could open hairpin structure of H-apt and induce CHA reaction. The product of CHA hybridized with cross-shaped DNA, resulting its leaving from the surface of UiO-66 and recovery of fluorescent signal. The limit of detection (LOD) was low to 0.87 pM. This method had been successfully applied for the detection of CAP in actual samples. Importantly, the high sensitivity was attributed to the great amplification efficiency of CHA, strong fluorescent intensity of cross-shaped DNA structure and great fluorescent quenched efficiency of UiO-66.

Solution and gaseous phase sensing of formaldehyde with economical triphenylmethane based sensors: a tool to estimate formaldehyde content in stored fish samples

The use of formalin to preserve raw food items such as fish, meat, vegetables etc. is very commonly practiced in the present day. Also, formaldehyde (FA), which is the main constituent of formalin solution, is known to cause serious health issues on exposure. Considering the ill effects of formaldehyde, herein we report synthesis of highly sensitive triphenylmethane based formaldehyde (FA) sensors from a single step reaction of inexpensive reagents namely 4-hydroxy benzaldehyde and 2,6-dimethyl phenol. The synthetic method also provides highly pure product in bulk quantity. The analytical activity of the triphenylmethane sensor 1 with a limit of detection (LOD) value of 2.31 × 10-6 M for FA was significantly enhanced through induced deprotonation and thereafter a LOD value of 1.82 × 10-8 M could be achieved. To the best of our knowledge, the LOD value of the deprotonated form (sensor 2) for FA was superior to those of all the FA optical sensors reported so far. The mechanism of sensing was demonstrated by 1H-NMR titration and recording mass spectra before and after addition of FA to a solution of sensor 2. Both sensor 1 and sensor 2 exhibit quenching in emission upon addition of FA. A fluorescence study also demonstrates enhancement in analytical activity of the sensor upon induced deprotonation. Then the sensor was effectively immobilized into a hydrophilic and biocompatible starch-PVA polymer matrix which enabled detection of FA in a 100% aqueous system reversibly. Again, quick and effective sensing of FA in real food samples (stored fish) with the help of a computational application was demonstrated. The sensors have significant practical applicability as they effectively detect FA in real food samples qualitatively and quantitatively.

3D printing-based lateral flow visual assay utilizing the dual-excitation property of nitrogen-doped carbon dots for the ratiometric determination and chemometric discrimination of flavonoids

A ratiometric fluorescence sensor has been established based on dual-excitation carbon dots (D-CDs) for the detection of flavonoids (morin is chosen as the typical detecting model for flavonoids). D-CDs were prepared using microwave radiation with o-phenylenediamine and melamine and exhibit controllable dual-excitation behavior through the regulation of their concentration. Remarkably, the short-wavelength excitation of D-CDs can be quenched by morin owing to the inner filter effect, while the long-wavelength excitation remains insensitive, serving as the reference signal. This contributes to the successful design of an excitation-based ratiometric sensor. Based on the distinct and differentiated variation of excitation intensity, morin can be determined from 0.156 to 110 µM with a low detection limit of 0.156 µM. In addition, an intelligent and visually lateral flow sensing device is developed for the determination  of morin content in real samples with satisfying recoveries, which indicates the potential application for human health monitoring.

A highly sensitive point-of-care detection platform for Salmonella typhimurium by integrating magnetic enrichment and fluorescent CsPbBr3@SiO2

A platform was designed based on Fe3O4 and CsPbBr3@SiO2 for integrated magnetic enrichment-fluorescence detection of Salmonella typhimurium, which significantly simplifies the detection process and enhances the working efficiency. Fe3O4 served as a magnetic enrichment unit for the capture of S. typhimurium. CsPbBr3@SiO2 was employed as a fluorescence-sensing unit for quantitative signal output, where SiO2 was introduced to strengthen the stability of CsPbBr3, improve its biomodificability, and prevent lead leakage. More importantly, the SiO2 shell shows neglectable absorption or scattering towards fluorescence, making the CsPbBr3@SiO2 exhibit a high quantum yield of 74.4%. After magnetic enrichment, the decreasing rate of the fluorescence emission intensity of the CsPbBr3@SiO2 supernatant at 527 nm under excitation light at UV 365 nm showed a strong linear correlation with S. typhimurium concentration of 1 × 102~1 × 108 CFU∙mL-1, and the limit of detection (LOD) reached 12.72 CFU∙mL-1. This platform has demonstrated outstanding stability, reproducibility, and resistance to interference, which provides an alternative for convenient and quantitative detection of S. typhimurium.

Efficient porphyrin integrated UiO-66 probes for ratiometric fluorescence sensing of antibiotic residues in milk

Dual-emissive fluorescence probes were designed by integrating porphyrin into the frameworks of UiO-66 for ratiometric fluorescence sensing of amoxicillin (AMX). Porphyrin integrated UiO-66 showed dual emission in the blue and red region. AMX resulted in the quenching of blue fluorescence component, attributable to the charge neutralization and hydrogen bonds induced energy transfer. AMX was detected using (F438/F654) as output signals. Two linear relationships were observed (from 10 to 1000 nM and 1 to 100 µM), with a limit of detection of 27 nM. The porphyrin integrated UiO-66 probe was used to detect AMX in practical samples. This work widens the road for the development of dual/multiple emissive fluorescence sensors for analytical applications, providing materials and theoretical supporting for food, environmental, and human safety.

Nanoscale potassium sensing based on valinomycin-anchored fluorescent gold nanoclusters

Gold nanoclusters are a smart platform for sensing potassium ions (K+). They have been synthesized using bovine serum albumin (BSA) and valinomycin (Val) to protect and cap the nanoclusters. The nanoclusters (Val-AuNCs) produced have a red emission at 616 nm under excitation with 470 nm. In the presence of K+, the valinomycin polar groups switch to the molecule's interior by complexing with K+, forming a bracelet structure, and being surrounded by the hydrophobic exterior conformation. This structure allows a proposed fluorometric method for detecting K+ by switching between the Val-AuNCs' hydrophilicity and hydrophobicity, which induces the aggregation of gold nanoclusters. As a result, significant quenching is seen in fluorescence after adding K+. The quenching in fluorescence in the presence of K+ is attributed to the aggregation mechanism. This sensing technique provides a highly precise and selective sensing method for K+ in the range 0.78 to 8 µM with LOD equal to 233 nM. The selectivity of Val-AuNCs toward K+ ions was investigated compared to other ions. Furthermore, the Val-AuNCs have novel possibilities as favorable sensor candidates for various imaging applications. Our detection technique was validated by determining K+ ions in postmortem vitreous humor samples, which yielded promising results.

Modulation of protein-ligand interactions in the presence of ZIF-8: Spectroscopy and molecular dynamics simulation

In this paper, we investigated the protein-ligand interactions in the presence of ZIF-8 using multi-spectroscopic approaches and molecular dynamics simulation. Fluorescence experiments and molecular docking results showed that ZIF-8 did not change the type of quenching and interaction force between ciprofloxacin (CIP) and human serum albumin (HSA), but made the binding constant of HSA-CIP to be smaller, suggesting that ZIF-8 maybe accelerate the dissociation of CIP from HSA-CIP complex. Moreover, the effect of ZIF-8 on the physiological function of HSA was explored. Multi-spectroscopic methods revealed that ZIF-8 did not significantly alter the microenvironment of amino acid groups, but cause a slight decrease in the content of α-helical conformation, and a sparse and flexible structure of the protein backbone. These peculiarities might lead to the diminution of HSA's ability to control drugs. In short, ZIF-8 might enhance drug effect due to affecting the binding of drugs to proteins. However, the present study is only a preliminary investigation of the suitability of ZIF-8 as a drug carrier in vitro, and subsequent in vivo experimental studies will be required to further confirm the idea.

Ratiometric fluoroprobe based on Eu-MOF@Tb3+ for detecting tetracycline hydrochloride in freshwater fish and its application in rapid visual detection

Tetracycline hydrochloride (TCH), a prevalent antibiotic in aquaculture for treating bacterial infections, poses challenges for on-site detection. This study employed the reversed-phase microemulsion method to synthesize a uniform nano metal-organic framework (MOF) material, europium-benzene-p-dicarboxylic acid (Eu-BDC), doped with Tb3+ to form a dual-emission fluorescence probe. By leveraging the combined a-photoinduced electron-transfer (a-PET) and inner filter effect (IFE) mechanisms, high-sensitivity TCH detection in Carassius auratus and Ruditapes philippinarum was achieved. The detection range for TCH is 0.380-75 μM, with a low limit of detection (LOD) at 0.115 μM. Upon TCH binding, Eu-BDC fluorescence rapidly decreased, while Tb3+ fluorescence remained constant, establishing a ratiometric fluorescence change. Investigation into the TCH quenching mechanism on Eu-BDC was conducted using time-dependent density functional theory (TD-DFT) calculations and fluorescence quenching kinetic equations, suggesting a mixed quenching mechanism. Furthermore, a novel photoelectric conversion fluorescence detection device (FL-2) was developed and evaluated in conjunction with high-performance liquid chromatography-diode-array detection (HPLC-DAD). This is the first dedicated fluorescence device for TCH detection, showcasing superior photoelectric conversion performance and stability that reduces experimental errors associated with smartphone photography methods, presenting a promising avenue for on-site rapid TCH detection.

A novel dual-responsive colorimetric/fluorescent probe for the detection of N2H4 and ClO- and its application in environmental analysis and bioimaging

Hydrazine (N2H4) and hypochlorite (ClO-) are both reactive chemical substances extensively utilized across various industrial domains. Excessive hydrazine (N2H4) and hypochlorite (ClO-) can pose significant risks to the environment, ecosystems, and human health. In order to assess and control the environmental hazard caused by N2H4 and ClO-, there is an imperative need for efficient methods capable of rapid and precise detection of these contaminants. This paper introduces a novel dual-responsive colorimetric/fluorescent probe (MDT) for the detection of N2H4 and ClO- in environmental and biological samples. The probe exhibits turn-on fluorescent responses to N2H4 or ClO- with low detection limits (N2H4: 8 nM; ClO-: 15 nM), large Stokes shifts (N2H4: 175 nm; ClO-: 203 nm), short response time (N2H4: 4 min; ClO-: 5 s) and broad pH range (5-10). In practical applications, MDT has been successfully employed in detecting N2H4 and ClO- in water and soil samples from diverse locations. Test strips loaded with MDT offer a visual and convenient means to track N2H4 vapor and quantify N2H4 and ClO- concentrations in solutions. Finally, MDT has been utilized for sensing N2H4 and ClO- in Arabidopsis thaliana roots and living zebrafish. This study presents a promising tool for monitoring N2H4 and ClO- in the environment and living organisms.

Green and inventive fluorescence approach for levodropropizine determination in human plasma

A green, rapid and sensitive fluorimetric method to quantify levodropropizine (LVP) in human plasma was exploited for the first time. The proposed method adopts LVP's intrinsic fluorescence in distilled water at a detecting emission of 345 nm following excitation at 240 nm. LVP displayed linearity across concentrations ranging from 50 to 1000 ng mL-1, with a detection limit of 0.77 ng mL-1 and a quantification limit of 2.33 ng mL-1. Thorough validation confirmed its reliability, successfully determining LVP in tablets with an average recovery of 98.64 ± 1.07 %. Furthermore, the method's applicability extended to estimate the studied drug in spiked human plasma with excellent obtained percentage recoveries (98.68 ± 1.28-100.14 ± 1.23).

Development of a simple polymer-based sensor for detection of the Pirimicarb pesticide

In this study, a sensitive and selective fluorescent chemosensor was developed for the determination of pirimicarb pesticide by adopting the surface molecular imprinting approach. The magnetic molecularly imprinted polymer (MIP) nanocomposite was prepared using pirimicarb as the template molecule, CuFe2O4 nanoparticles, and graphene quantum dots as a fluorophore (MIP-CuFe2O4/GQDs). It was then characterized using X-ray diffraction (XRD) technique, Fourier transforms infrared (FT-IR) spectroscopy, scanning electron microscope (SEM), and transmission electron microscopy (TEM). The response surface methodology (RSM) was also employed to optimize and estimate the effective parameters of pirimicarb adsorption by this polymer. According to the experimental results, the average particle size and imprinting factor (IF) of this polymer are 53.61 nm and 2.48, respectively. Moreover, this polymer has an excellent ability to adsorb pirimicarb with a removal percentage of 99.92 at pH = 7.54, initial pirimicarb concentration = 10.17 mg/L, polymer dosage = 840 mg/L, and contact time = 6.15 min. The detection of pirimicarb was performed by fluorescence spectroscopy at a concentration range of 0-50 mg/L, and a sensitivity of 15.808 a.u/mg and a limit of detection of 1.79 mg/L were obtained. Real samples with RSD less than 2 were measured using this chemosensor. Besides, the proposed chemosensor demonstrated remarkable selectivity by checking some other insecticides with similar and different molecular structures to pirimicarb, such as diazinon, deltamethrin, and chlorpyrifos.

Dual-channel fluorescent sensors based on chitosan-coated Mn-doped ZnS micromaterials to detect ampicillin

The global threat of antibiotic resistance has increased the importance of the detection of antibiotics. Conventional methods to detect antibiotics are time-consuming and require expensive specialized equipment. Here, we present a simple and rapid biosensor for detecting ampicillin, a commonly used antibiotic. Our method is based on the fluorescent properties of chitosan-coated Mn-doped ZnS micromaterials combined with the β-lactamase enzyme. The biosensors exhibited the highest sensitivity in a linear working range of 13.1-72.2 pM with a limit of detection of 8.24 pM in deionized water. In addition, due to the biological specificity of β-lactamase, the proposed sensors have demonstrated high selectivity over penicillin, tetracycline, and glucose through the enhancing and quenching effects at wavelengths of 510 nm and 614 nm, respectively. These proposed sensors also showed promising results when tested in various matrices, including tap water, bottled water, and milk. Our work reports for the first time the cost-effective (Mn:ZnS)Chitosan micromaterial was used for ampicillin detection. The results will facilitate the monitoring of antibiotics in clinical and environmental contexts.

Pore-Engineered Hydrogen-Bonded Supramolecular Fluorosensor for Ultrasensitive Determination of Copper Ions

The selective quantification of copper ions (Cu2+) in biosamples holds great importance for disease diagnosis, treatment, and prognosis since the Cu2+ level is closely associated with the physiological state of the human body. While it remains a long-term challenge due to the extremely low level of free Cu2+ and the potential interference by the complex matrices. Here, a pore-engineered hydrogen-bonded organic framework (HOF) fluorosensor is constructed enabling the ultrasensitive and highly selective detection of free Cu2+. Attributing to atomically precise functionalization of active amino "arm" within the HOF pores and the periodic π-conjugated skeleton, this porous HOF fluorosensor affords high affinity toward Cu2+ through double copper-nitrogen (Cu─N) coordination interactions, resulting in specific fluorescence quenching of the HOF as compared with a series of substances ranging from other metal ions, metabolites, amino acids to proteins. Such superior fluorescence quenching effect endows the Cu2+ quantification by this new HOF sensor with a wide linearity of 50-20 000 nm, a low detection limit of 10 nm, and good recoveries (89.5%-115%) in human serum matrices, outperforming most of the reported approaches. This work highlights the practicability of hydrogen-bonded supramolecular engineering for designing facile and ultrasensitive biosensors for clinical free Cu2+ determination.