Biochar as a sorbent for contaminant management in soil and water: a review

Facile fabrication of chitosan/bone/bamboo biochar beads for simultaneous removal of co-existing Cr(VI) and bisphenol a from water

Heavy metal Cr(VI) and organic BPA have posed harmful risks to human health, aquatic organisms and the ecosystem. In this work, Chitosan/bone/bamboo biochar beads (CS-AMCM) were synthesized by co-pyrolysis and in situ precipitation method. These microbeads featured a particle size of approximately 1 ± 0.2 mm and were rich in oxygen/nitrogen functional groups. CS-AMCM was characterized using XRD, Zeta potential, FTIR, etc. Experiments showed that adsorption processes of CS-AMCM on Cr(VI) and BPA fitted well to Langmuir model, with theoretical maximum capacities of 343.61 mg/g and 140.30 mg/g, respectively. Pore filling, electrostatic attraction, redox, complexation and ion exchange were the main mechanisms for Cr(VI), whereas for BPA, the intermolecular force (hydrogen bond) and pore filling were involved. CS-AMCM with adsorbed Cr(VI) demonstrated effective activation in producing ·OH and ·O2 from H2O2, which degraded BPA and Cr(VI) with the removal rates of 99.2% and 98.2%, respectively. CS-AMCM offers the advantages of low-cost, large adsorption capacity, high catalytic degradation efficiency, and favorable recycling in treating Cr(VI) and BPA mixed wastewater, which shows great potential in treating heavy metal and organic matter mixed pollution wastewater.

Mechanisms insights into Cd passivation in soil by lignin biochar: Transition from flooding to natural air-drying

Biochar shows great potential in soil cadmium pollution treatment, however, the effect and mechanisms of biochar on cadmium passivation (CP) during the long-term process of soil from flooding to natural air-drying are not clear. In this study, a 300-day experiment was conducted to keep the flooded water level constant for the first 100 days and then dried naturally. Mechanisms of CP by lignin biochar (LBC) were analyzed through chemical analysis, FTIR-2D-COS, EEMs-PARAFAC, ultraviolet spectroscopy characterizations, and microbial community distribution of soil. Results showed that application of LBC results in rapid CP ratio in soil within 35 days, mainly in the residual and Fe-Mn bound states (total 72.80%). CP ratio further increased to 90.89% with water evaporation. The CP mechanisms include precipitation, electrostatic effect, humus complexation, and microbial remediation by promoting the propagation of fungi such as Penicillium and Trichoderma. Evaporation of water promoted the colonization of aerobic microorganisms and then increased the degree of soil humification and aromatization, thereby enhancing the cadmium passivation. Simultaneously, the biochar could reduce the relative abundance of plant pathogens in soil from 1.8% to 0.03% and the freshness index (β/α) from 0.64 to 0.16, favoring crop growth and promoting carbon sequestration and emission reduction.

Development and implementation of a novel mechanized planting method for ecological restoration of aquatic environments using degradable nutrition pots

Submerged plants play a significant role in the remediation and purification of polluted water bodies. Reconstruction of submerged plants has been considered as an important ecological method to restore aquatic ecosystems. However, large-scale and efficient plantation of submerged plants in water restoration is a huge challenge. This paper proposes a novel mechanized planting method for submerged plants utilizing nutrition pots as planting units. Firstly, the details of the mechanized planting method were introduced. The mechanized planting method involves pre-planting the reproductive bodies of submerged plants in degradable nutrition pots, and then implanting them into the underwater soil through a planting device. Secondly, the interaction force between the nutrition pot and the soil was measured. It was found that the implantation force of nutrition pots increases with planting velocity. The planting force shows a significant increase trend when the water content in the soil decreases. Thirdly, the deformation of the nutrition pot was studied through simulations. It was discovered that the deformation of the nutrition pot mainly occurs at the bottom and the side walls near the bottom, and the limited deformation ensures the integrity of the nutrition pot. Finally, a planting device with a linear motion mechanism was designed, and a typical submerged plant, Vallisneria natans was tested, using agricultural paper seedling containers as the nutrition pots. It was demonstrated that the mechanized device successfully planted submerged plant nutrition pots into the soil, and the submerged plants survived and showed a clear growth trend. The mechanized planting method of submerged plants proposed in this article is expected to provide a new and friendly technology for ecological restoration of water source.

Comparative role of charcoal, biochar, hydrochar and modified biochar on bioavailability of heavy metal(loid)s and machine learning regression analysis in alkaline polluted soil

Pot experiment was performed aimed to assess the comparative role of charcoal, biochar, hydrochar and thiourea-vegetable modified biochar at 1 and 2 % doses, and <1 mm particle size on the bioavailability of Cd, Pb, As, Ni, Cu and Zn, and enhance NPK, and mustard growth in a slightly alkaline polluted soil. Furthermore, machine learning method was used to examine the systematic evaluation of the impact of feature selection based on Pearson's correlation on the performance of the linear regression model. The results revealed that maximum fresh and dry biomass of mustard was observed by 26.38 and 38.18 % with hydrochar 1 %, whereas lemon biochar at 2 % reduced fresh and dry biomass up to 34.0 and 53.0 % than control. The immobilization of Cd and Pb was observed by 83.70 and 71.15 % with thiourea-vegetable modified biochar at 2 %, As 71.62 % with hydrochar 2 %, Ni 80.84 % with thiourea-vegetable modified biochar 2 %, Cu 66.32 % with and Zn 36.30 % with thiourea-vegetable modified biochar at 2 % than control. However, the maximum mobilization of Cu in soil was observed by 30.3 % with lemon biochar 2 %, similarly for Zn 37.36 % with hydrochar 2 % as compared with other treatments. The phyto-availability of Cd, Pb, As and Cu in the mustard shoot and root biomass was reduced except Ni and Zn in soil than control. It was observed that using the machine learning regression analysis approach, variability in treatments effectiveness is evident across different feature correlation thresholds. This study clearly shows that the beneficial role of studied amendments on mustard growth and reduced bioavailability of heavy metal(loid)s and enhance primary macronutrients in alkaline polluted soil. It is suggested that future studies may be conducted on combined application of studies amendments on plant growth, immobilization of heavy metal(loid)s in multi-metal polluted soil under different field conditions.

Biochar-nanoparticle combinations enhance the biogeochemical recovery of a post-mining soil

Here we addressed the capacity of distinct amendments to reduce arsenic (As), copper (Cu), selenium (Se) and zinc (Zn) associated risks and improve the biogeochemical functions of post-mining soil. To this, we examined nanoparticles (NPs) and/or biochar effects, combined with phytostabilization using Lolium perenne L. Soil samples were taken in a former metal mine surroundings. Ryegrass seeds were sown in pots containing different combinations of NPs (zero-valent iron (nZVI) or hydroxyapatite (nH)) (0 and 2 %), and biochar (0, 3 and 5 %). Plants were grown for 45 days and the plant yield and element accumulation were evaluated, also soil properties (element distribution within the soil fractions, fertility, and enzymatic activities associated with microbiota functionality and nutrient cycling) were determined. Results showed biochar-treated soil had a higher pH, and much higher organic carbon (C) content than control soil and NP-treated soils, and it revealed increased labile C, total N, and available P concentrations. Soil treatment with NP-biochar combinations increased exchangeable non-acid cation concentrations and reduced exchangeable Na%, improved soil fertility, reduced sodicity risk, and increased ryegrass biomass. Enzymatic activities, particularly dehydrogenase and glucosidase, increased upon the addition of biochar, and this effect was fostered by NPs. Most treatments led to a significant reduction of metal(loid)s contents in biomass, mitigating contamination risks. The two different NPs had similar effects in many parameters, nH outperformed nZVI in terms of increased nutrients, C content, and enzymatic activities. On the basis of our results, combined biochar-NP amendments use, specially nH, emerges as a potential post-mining soil restoration strategy.

A coherent engineering assessment of ABS/biochar biocomposites in MEX 3D additive manufacturing

Acrylonitrile butadiene styrene (ABS) composites were prepared in filament form compatible with the material extrusion (MEX) 3D printing method, using biochar as a filler at various loadings of up to 10.0 wt %. Samples were fabricated to experimentally investigate their mechanical performance. The ABS/biochar composites were characterized using thermogravimetric analysis, differential scanning calorimetry, Raman spectroscopy, and rheological tests. The electrical properties of the composites were investigated using broadband dielectric spectroscopy. Scanning electron microscopy was utilized to analyze the morphological features of the fabricated specimens by examining their side and fracture surfaces. The results indicate that the composite with 4.0 wt % biochar content compared to pure ABS showed the highest mechanical response between the prepared composites (24.9 % and 21 % higher than the pure ABS tensile and flexural strength respectively). The composites retained their insulating behavior. These findings contribute to expanding the utilization of the material extrusion (MEX) 3D printing method while also unlocking prospects for potential applications in microelectronics, apart from mechanical reinforcement.

The immobilization of cadmium by rape straw derived biochar in alkaline conditions: Sorption isotherm, molecular binding mechanism, and in-situ remediation of Cd-contaminated soil

The issue of cadmium (Cd) contamination in alkaline soils is escalating, necessitating the prompt implementation of effective passivation strategies. Biochar has gained significant attention for its potential in immobilizing heavy metals; however, the suitability of biochar as a remediation material and its micro-scale interaction mechanisms with Cd under alkaline conditions remain unclear. Rape straw (RS) were pyrolyzed at 400 °C (RB400) and 700 °C (RB700) to produce biochar. Adsorption and soil incubation experiments were carried out to assess the feasibility of using rape straw derived biochar pyrolyze at different temperatures and understanding their remediation mechanisms in alkaline environments. The sorption capacity for Cd immobilization was evaluated using sorption isotherms, revealing that RB700 exhibited enhanced Cd sorption performance with a maximum sorption capacity of 119.33 mg g-1 calculated from the Langmuir isotherm equation at pH 8. Cd L3-edge X-ray absorption near-edge structure (XANES) spectroscopy analysis confirmed that the dominant sorption species of Cd were organic Cd in RB400, with CdCO3 precipitation increased to 73.9% in RB700. Solid-state 13C nuclear magnetic resonance (13C-NMR) spectroscopy demonstrated that aromatic and carboxyl C functional groups are involved in the organic sorption of Cd through complexation and Cd2+-π interactions in alkaline solutions. The precipitation of CdCO3 in RB700 may resulted in a more effective passivation effect compared to RB400, leading to a significant 15.54% reduction in the DTPA-Cd content in Cd-contaminated soil. These findings highlight the effective Cd passivation Cd in alkaline environments by rape straw derived biochar, providing new molecular insights into the Cd retention mechanism of biochar. Furthermore, it presents novel ideas for improving remediation approaches for alkaline Cd-contaminated soils.

Enriched rice husk biochar superior to commercial biochar in ameliorating ammonia loss from urea fertilizer and improving plant uptake

Adding value to agricultural leftovers and turning them into biochar is a viable way to replenish soil nutrients and boost crop productivity. To further validate the efficacy of enriched rice husk biochar, an incubation study and a pot experiment were conducted: (1) to describe the effect of enriched rice husk biochar addition on soil total N, soil exchangeable NH4 + and available NO3 - and (2) to describe the effect of enriched rice husk biochar on improving N, P, K, Ca, and Mg uptake, use efficiency, and dry matter production of rice plants. The amount of NH3 loss that was considerably reduced by rice husk biochar at 5 and 10 t ha-1 was 34 % lower than the control. The availability of soil total N, exchangeable NH4 +, available NO3 -, available P, and exchangeable cations was greatly enhanced by the addition of rice husk biochar. Due to the effective nutrient uptake that occurs with an increase in soil nutrient level, the physical growth of the rice plant (height, tiller number, greenness, and panicle number) increeased significantly in treatments supplemented with 5 t ha-1 rice husk biochar. When rice plants were treated with 5 t ha-1 rice husk biochar, their absorption of N, P, and K increased by >80 %, respectively. The production of dry matter in rice plants increased as a result of the increased N intake. The application of 5 t ha-1 of rice husk biochar enhanced the soil nutrients by reducing NH3 loss and augmenting soil nutrients for efficient plant absorption, as demonstrated by the favourable enhancement of soil macro- and micronutrients and biomass of rice plants.

Effects of the physical structure and surface charge of activated carbon on the reduction of biogenic amines in anchovy fish sauce

This study aimed to efficiently reduce a large number of biogenic amines in salt-fermented fish sauce while minimizing sensory reduction using various activated carbons. Aromatic amines, such as tryptamine and phenethylamine, were reduced by 86.1-100 % after treating with activated carbon. Histamine with a heterocyclic structure decreased by 13-42 %. No significant effects were observed on the levels of aliphatic amines, putrescine, cadaverine, spermine, and spermidine. The major taste component, amino acid nitrogen, was reduced to within 3 %, and brown color removal was reduced depending on the type of activated carbon used. Acid-modified AC-A and AC-B had rough surfaces, high total acidity, low point of zero charge (pHpzc), and rich surface functional groups. Owing to its smooth surface, low total acidity, high pHpzc, and few surface functional groups, AC-C exhibited a higher histamine elimination and less color reduction despite its lower surface area compared to other activated carbons.

Preparation of porous biochar from fusarium wilt-infected banana straw for remediation of cadmium pollution in water bodies

The problem of cadmium pollution and its control is becoming increasingly severe issue in the world. Banana straw is an abundant bio raw material, but its burning or discarding in field not only causes pollution but also spreads fusarium wilt. The objective of this paper is to utilize biochar derived from the wilt-infected banana straw for remediation of Cd(II) pollution while to eliminate the pathogen. The activity of wilt pathogen in biochar was determined by PDA petri dish test. The Cd(II) adsorption of the biochar was determined by batch adsorption experiments. The effects of KOH concentration (0.25, 0.5 and 0.75 M) on the physicochemical characteristics of the biochar were also observed by BET, SEM, FTIR, XRD and XPS. Results showed that pristine banana straw biochar (PBBC) did not harbor any pathogen. The specific surface area (SSA) and Cd(II) adsorption capacity of 0.75 M KOH modified banana straw biochar (MBBC0.75M) were increased by 247.2% and 46.1% compared to that of PBBC, respectively. Cd(II) adsorption by MBBC0.75M was suitable to be described by the pseudo-second-order kinetic model and Freundlich isotherm. After Cd(II) adsorption, the CdCO3 were confirmed by XRD and observed through SEM. The weakness and shift of oxygen-containing functional groups in MBBC0.75M after Cd(II) adsorption implied that those groups were complexed with Cd(II). The results showed that pyrolysis could not only eliminate banana fusarium wilt, but also prepare porous biochar with the wilt-infected banana straw. The porous biochar possessed the potential to adsorb Cd(II) pollutants.

Applications of charcoal, activated charcoal, and biochar in aquaculture - A review

Environmental pollution and poor feed quality pose potential threats to aquatic organisms and human health, representing challenges for the aquaculture industry. In light of the rising demand for aquatic organisms, there is an urgent need to improve aquacultural production and protect the products from contamination. Char, a carbonaceous material derived through pyrolysis of organic carbon-rich biomass, has proven advantages in soil, air, and water remediation. While char's performance and the associated physicochemical characteristics depend strongly on the pyrolysis temperature, residence time, and feedstock type, char generally shows advantages in pollutant removal from the environment and livestock. This enables it to enhance the health and growth performance of livestock. Given the growing attention to char application in aquaculture in recent years, this review summarises major studies on three applications: aquacultural water treatment, sediment remediation, and char-feed supplement. Most of these studies have demonstrated char's positive effects on pollutant removal from organisms and aquacultural environments. Moreover, adopting char as fish feed can improve fish growth performance and the condition of their intestinal villi. However, due to insufficient literature, further investigation is needed into the mechanistic aspects of pollutants removal in aquatic organisms by char as a feed additive, such as the transportation of char inside aquatic organisms, the positive and negative effects of char on these products, and how char alters the gut microbiota community of these products. This paper presents an overview of the current application of char in aquaculture and highlights the research areas that require further investigation to enrich future studies.

Pyrolyzed and unpyrolyzed residues enhance maize yield under varying rates of application and fertilization regimes

Biochar is increasingly gaining popularity due to its extensive recommendation as a potential solution for addressing the concerns of food security and climate change in agroecosystems, with biochar application for increased carbon sequestration, enhanced soil fertility, improved soil health, and increased crop yield and quality. There have been multiple studies on crop yield utilizing various biochar types and application amounts; however, none have focused on the influence of diverse biochar types at various pyrolysis temperatures with different application amounts and the integration of fertilizer regimes in maize crops. Therefore, a two-year factorial field experiment was designed in a temperate Himalayan region of India (THRI) to evaluate the residual effect of different biochar on maize yield under different pyrolysis temperatures, various application rates and fertilizer regimes. The study included three factors viz., amendment type (factor 1), rate of application (factor 2) and fertilizer regime (factor 3). Amendment type included 7 treatments: No biochar- control (A1), apple biochar @ 400 °C pyrolysis temperature (A2), apple biochar @ 600 °C pyrolysis temperature (A3), apple residue biomass (A4), dal weed biochar @ 400 °C pyrolysis temperature (A5), dal weed biochar @ 600 °C pyrolysis temperatures (A6), and dal weed residue biomass (A7). The rate of application included 3 levels: Low (L- 1 t ha-1), medium (M- 2 t ha-1), and high (H- 3 t ha-1). At the same time, the fertilizer regimes included 2 treatments: No fertilizer (N) and recommended dose of fertilizer (F). The results revealed that among the various amendment type, rate of application and fertilizer regimes, the A3 amendment, H rate of application and F fertilizer regime gave the best maize growth and productivity outcome. Results revealed that among the different pyrolyzed residues used, the A3 amendment had the highest plant height (293.87 cm), most kernels cob-1 (535.75), highest soil plant analysis development (SPAD) value (58.10), greatest cob length (27.36 cm), maximum cob girth (18.18 cm), highest grain cob yield (1.40 Mg ha-1), highest grain yield (4.78 Mg ha-1), higher test weight (305.42 gm), and highest stover yield (2.50 Mg ha-1). The maximum dry weight in maize and the number of cobs plant-1 were recorded with amendments A4 (14.11 Mg ha-1) and A6 (1.77), respectively. The comparatively 2nd year of biochar application than the 1st year, the H level of the rate of application than the L rate and the application and integration of the recommended dose of fertilizer in maize results in significantly higher values of growth and productivity in maize. Overall, these findings suggest that the apple biochar @ 600 °C pyrolysis temperature (A3) at a high application rate with the addition of the recommended dose of fertilizer is the optimal biochar for enhancing the growth and productivity of maize in the THRI.

Influences of earthworm activity and mucus on Cd phytoremediation based on harvesting different leaf types of tall fescue (Festuca arundinacea)

To explore cost-effective and efficient phytoremediation strategies, this study investigated the distinct roles of earthworm activity and mucus in enhancing Cd phytoextraction from soils contaminated by Festuca arundinacea, focusing on the comparative advantages of selective leaf harvesting versus traditional whole-plant harvesting methods. Our study employed a horticultural trial to explore how earthworm activity and mucus affect Festuca arundinacea' s Cd phytoremediation in soils using control, earthworm, and mucus treatments to examine their respective effects on plant growth and Cd distribution. Earthworm activity increased the dry weight of leaves by 13.5% and significantly increased the dry weights of declining and senescent leaves, surpassing that of the control by more than 40%. Earthworm mucus had a similar, albeit less pronounced, effect on plant growth than earthworm activity. This study not only validated the significant role of earthworm activity in enhancing Cd phytoextraction by Festuca arundinacea, with earthworm activity leading to over 85% of Cd being allocated to senescent tissues that comprise only approximately 20% of the plant biomass, but also highlighted a sustainable and cost-effective approach to phytoremediation by emphasizing selective leaf harvesting supported by earthworm activity. By demonstrating that earthworm mucus alone can redistribute Cd with less efficiency compared to live earthworms, our findings offer practical insights into optimizing phytoremediation strategies and underscore the need for further research into the synergistic effects of biological agents in soil remediation processes.

Synthesis, delineation and technological advancements of algae biochar for sustainable remediation of the emerging pollutants from wastewater-a review

The use of algae for value-added product and biorefining applications is enchanting attention among researchers in recent years due to its remarkable photosynthetic ability, adaptability, and capacity to accumulate lipids and carbohydrates. Algae biomass, based on its low manufacturing costs, is relatively renewable, sustainable, environmentally friendly and economical in comparison with other species. High production rate of algae provides a unique opportunity for its conversion to biochar with excellent physicochemical properties, viz. high surface area and pore volume, high adsorption capacity, abundant functional groups over surface, etc. Despite several potential algal-biochar, a detailed study on its application for removal of emerging contaminants from wastewater is limited. Therefore, this technical review is being carried out to evaluate the specific elimination of inorganic and organic pollutants from wastewater, with a view to assessing adsorption performances of biochar obtained from various algae species. Species-specific adsorption of emerging pollutants from wastewater have been discussed in the present review. The promising methods like pyrolysis, gasification, dry and wet torrefaction for the production of algae biochar are highlighted. The strategies include chemical and structural modifications of algae biochar for the removal of toxic contaminants have also been considered in the current work. The overall aim of this review is to confer about the synthesis, technological advancements, delineation and application of algae biochar for the treatment of wastewater.

Study on Adsorption of Cd in Solution and Soil by Modified Biochar-Calcium Alginate Hydrogel

Contamination with cadmium (Cd) is a prominent issue in agricultural non-point source pollution in China. With the deposition and activation of numerous Cd metal elements in farmland, the problem of excessive pollution of agricultural produce can no longer be disregarded. Considering the issue of Cd pollution in farmland, this study proposes the utilization of cross-linked modified biochar (prepared from pine wood) and calcium alginate hydrogels to fabricate a composite material which is called MB-CA for short. The aim is to investigate the adsorption and passivation mechanism of soil Cd by this innovative composite. The MB-CA exhibits a higher heavy metal adsorption capacity compared to traditional biochar and hydrogel due to its increased oxygen-containing functional groups and heavy metal adsorption sites. In the Cd solution adsorption experiment, the highest Cd2+ removal rate reached 85.48%. In addition, it was found that the material also has an excellent pH improvement effect. Through the adsorption kinetics experiment and the soil culture experiments, it was determined that MB-CA adheres to the quasi-second-order kinetic model and is capable of adsorbing 35.94% of Cd2+ in soil. This study validates the efficacy of MB-CA in the adsorption and passivation of Cd in soil, offering a novel approach for managing Cd-contaminated cultivated land.

Per- and poly-fluoroalkyl substances in agricultural contexts and mitigation of their impacts using biochar: A review

Growing concern over the presence of per- and polyfluoroalkyl substances (PFAS) in agricultural compartments (e.g., soil, water, plants, soil fauna) has led to an increased interest in scalable and economically feasible remediation technologies. Biochar is the product of pyrolyzing organic materials (crop waste, wood waste, manures, grasses) and has been used as a low-cost adsorbent to remove contaminants including PFAS. This review frames biochar as a strategy for mitigating the detrimental impacts of PFAS in agricultural systems and discusses the benefits of this strategy within the framework of the needs and challenges of contaminant remediation in agriculture. To gauge the optimal physicochemical characteristics of biochar in terms of PFAS adsorption, principal component analysis using >100 data points from the available literature was performed. The main biochar-based PFAS treatment strategies (water filtration, soil application, mixing with biosolids) were also reviewed to highlight the benefits and complications of each. Life cycle analyses on the use of biochar for contaminant removal were summarized, and data from selected studies were used to calculate (for the first time) the global warming potential and net energy demand of various agriculturally important biochar classes (crop wastes, wood wastes, manures) in relation to their PFAS adsorption performance. This review serves to identify key gaps in our knowledge of (i) PFAS adsorption by biochars in agricultural remediation applications and (ii) environmental costs/benefits of biochars in relation to their adsorptive properties toward PFAS. The concepts introduced in this review may assist in developing large-scale biochar-based PFAS remediation strategies to help protect the agricultural food production environment.

Feasibility study of Aesculus turbinata fruit shell-derived biochar for ammonia removal in wastewater and its subsequent use as nitrogen fertilizer

In the face of increasing nitrogen demand for crop cultivation driven by population growth, this study presents a sustainable solution to address both the heightened demand and the energy-intensive process of nitrogen removal from wastewater. Our approach involves the removal of nitrogen from wastewater and its subsequent return to the soil as a fertilizer. Using biochar derived from Aesculus turbinata fruit shells (ATFS), a by-product of post-medical use, we investigated the effect of pyrolysis temperature on the NH4-N adsorption capacity of ATFS biochar (ATFS-BC). Notably, the ATFS-BC pyrolyzed at 300 °C (ATFS-BC300) exhibited the highest NH4-N adsorption capacity of 15.61 mg/g. The superior performance of ATFS-BC300 was attributed to its higher number of oxygen functional groups and more negatively charged surface, which contributed to the enhanced NH4-N adsorption. The removal of NH4-N by ATFS-BC300 involved both physical diffusion and chemisorption, with NH4-N forming a robust multilayer adsorption on the biochar. Alkaline conditions favored NH4-N adsorption by ATFS-BC300; however, the presence of trivalent and divalent ions hindered this process. Rice plants were cultivated to assess the potential of NH4-N adsorbed ATFS-BC300 (NH4-ATFS-BC300) as a nitrogen fertilizer. Remarkably, medium doses of NH4-ATFS-BC300 (594.5 kg/ha) exhibited key agronomic traits similar to those of the commercial nitrogen fertilizer in rice seedlings. Furthermore, high doses of NH4-ATFS-BC300 demonstrated superior agronomic traits compared to the commercial fertilizer. This study establishes the viability of utilizing ATFS-BC300 as a dual-purpose solution for wastewater treatment and nitrogen fertilizer supply, presenting a promising avenue for addressing environmental challenges.

Knowledge graph and development hotspots of biochar as an emerging aquatic antibiotic remediator: A scientometric exploration based on VOSviewer and CiteSpace

As an emerging material in the field of environmental remediation, biochar produced by carbonisation of organic solid waste has been widely used in the remediation of antibiotic wastewater due to its environmental friendliness and excellent adsorption properties. This study analyses the current literature in the field in a comprehensive and scientific manner using CiteSpace and VOSviewer technologies. Between 2011 and 2023, a total of 1162 papers were published in this domain, spanning three distinct stages: applied methods, mechanism investigation, and enhanced improvement. The results of keyword clustering indicate that the remediation of antibiotics complexed with multiple pollutants by biochar is the main research topic, followed by the remediation of antibiotics by biochar in combination with other technologies. Furthermore, drawing from current research hotspots in antibiotic remediation using biochar, this study identified the pivotal mechanisms involved: (1) The primary mechanisms by which raw biochar remediates antibiotics include π-π electron donor-acceptor interactions, hydrophobic interactions, electrostatic interactions, hydrogen-bonding, and pore filling. (2) Steam activation, acid/base, metal salt/metal oxide, and clay mineral modification can improve the physical/chemical properties of biochar, enhancing its adsorptive removal of antibiotics. (3) Biochar activated persulfate and degraded antibiotics via free radical pathways (SO4-•, •OH and O2-•) as well as non-free radical pathways (1O2 and electron transfer). In addition, the challenge and prospect of biochar engineering applications for antibiotic remediation lies in improving the main mechanism of antibiotic remediation by biochar. The prospective utilization of biochar in enhancing the remediation of antibiotic-related pollutants holds tremendous value for the future.

Use of selected amendments for reducing metal mobility and ecotoxicity in contaminated bottom sediments

The aims of the study were 1) to assess the suitability of selected amendments for reducing the mobility of metals in sediments by evaluating their effects on metal sorption capacity, and 2) to assess the ecotoxicity of sediment/amendment mixtures. Three different amendments were tested: cellulose waste, biochar, and dolomite. The efficiency of metal immobilization in mixtures was dependent on pH, which increased with concentrations of amendment. The higher negative charge observed for dolomite and cellulose waste corresponded with greater attraction of cations and enhanced metal sorption. For cellulose waste, the highest values of the Q parameter were attributed to the presence of OH groups, which corresponded with the highest immobilization of metals. Biochar reduced the negative surface charge, which highlights the importance of additional factors such as high specific surface area and volume of pores in metal immobilization. All amendments increased the SSA and VN2, indicating a higher number of sorption sites for metal immobilization. Most bioassays established a reduction of the ecotoxicity for amendments. Mixtures with dolomite (25%, 45% doses) and biochar (45% dose) were low toxic. Mixtures with cellulose waste were toxic or highly toxic. The mobility of metals from contaminated sediments can be limited by reused industry side products, which could contribute to further closing the circular economy loop.

Visualization of phenanthrene effect on biochar colloids transport in porous media

Biochar colloids (BCs) can be used as adsorbent materials for remediation of phenanthrene due to their high specific surface area and other characteristics. Understanding the effects of phenanthrene on the transport of BCs contributes to facilitate the removal of phenanthrene in soil and water habitats. In this work, the influence of phenanthrene on the transport of BCs under different environmental factors (pH, ionic strength (IS), media size) in a one-dimensional sand column was firstly explored together with a real-time visualization system to explore the transport mechanism of BCs in two-dimensional sand tank. The results show that phenanthrene adsorbed on the surface of BCs, shielded its surface charge and reduced the mobility of BCs in porous media. Acidic conditions promoted the agglomeration of BCs and adsorption of phenanthrene, resulting in a 51.03 % decrease in the maximum breakthrough rate of BCs compared to alkaline conditions. The same was true for the high IS condition, where the maximum breakthrough rate of BCs was only 0.95 % at IS = 50. Additionally, there was a substantial and positive correlation between media particle size and BCs mobility. As the quartz sand particle size increased, the maximum breakthrough rates of BCs were 2.67 %, 33.28 %, and 52.27 % in the 1-D experiment, and 0, 13.88 %, and 13.10 % in the 2-D experiment, respectively. The contact area of BCs with the medium expands under the fine particle size condition, leading to a significant decrease in the mobility of BCs at low potentials influenced by phenanthrene. This finding is significant for biochar application in phenanthrene contaminated soil and groundwater remediation.

Ecological consequences of biochar and hydrochar amendments in soil: assessing environmental impacts and influences

Anthropogenic activities have caused irreversible consequences on our planet, including climate change and environmental pollution. Nevertheless, reducing greenhouse gas (GHG) emissions and capturing carbon can mitigate global warming. Biochar and hydrochar are increasingly used for soil remediation due to their stable adsorption qualities. As soil amendments, these materials improve soil quality and reduce water loss, prevent cracking and shrinkage, and interact with microbial communities, resulting in a promising treatment method for reducing gas emissions from the top layer of soil. However, during long-term studies, contradictory results were found, suggesting that higher biochar application rates led to higher soil CO2 effluxes, biodiversity loss, an increase in invasive species, and changes in nutrient cycling. Hydrochar, generated through hydrothermal carbonization, might be less stable when introduced into the soil, which could lead to heightened GHG emissions due to quicker carbon breakdown and increased microbial activity. On the other hand, biochar, created via pyrolysis, demonstrates stability and can beneficially impact GHG emissions. Biochar could be the preferred red option for carbon sequestration purposes, while hydrochar might be more advantageous for use as a gas adsorbent. This review paper highlights the ecological impact of long-term applications of biochar and hydrochar in soil. In general, using these materials as soil amendments helps establish a sustainable pool of organic carbon, decreasing atmospheric GHG concentration and mitigating the impacts of climate change.

Response of chemical and biochemical soil properties to the spreading of biochar-based treated olive mill wastewater

Despite the polluting potential olive mill wastewater (OMW) can be a useful source of nutrients and organic compounds to improve soil properties. The aim of this paper was to verify if biochar-based treatment of OMW could be an efficient method to contrast the richness in phenolic compounds and phytotoxicity of OMW making it more suitable. for soil amendment. In this study poplar biochar (BP) was more effective than conifer biochar (BC) in terms of adsorbing phenols and reducing phytotoxicity at different biochar rates (5 and 10 %). In soil amendment BP-treated OMW induced an increase of organic carbon by approximately 15 % and notably BP10 treated OMW enhanced available phosphorous by 25 % after 30 days of incubation. In soil amended with 10 % BP-treated OMW microbial biomass and enzymatic activities were significantly enhanced after 30 and 90 days, with no effect on cress seed germination. Therefore, biochar based-treatment could be cost-effective and able to facilitate the long-term management of OMW in terms of storage and disposal.

Mechanism of clay mineral modified biochar simultaneously immobilizes heavy metals and reduces soil carbon emissions

Heavy metal pollution in farmland soil has become increasingly severe, and multi-element composite pollution has brought enormous harm to human production and life. Environmental changes in cold regions (such as freeze-thaw cycles and dry-wet alternations) may increase the potential physiological toxicity of heavy metals and exacerbate pollution risks. In order to reveal the effectiveness of sepiolite modified biochar in the remediation of the soil contaminated with lead (Pb), cadmium (Cd), and chromium (Cr), the rice husk biochar pyrolyzed at 500 and 800 °C were selected for remediation treatment (denoted as BC500 and BC800). Meanwhile, different proportions of sepiolite were used for modification (biochar: sepiolite = 1: 0.5 and 1: 1), denoted as MBC500/MBC800 and HBC500/HBC800, respectively. The results showed that modified biochar with sepiolite can effectively improve the immobilization of heavy metals. Under natural conservation condition, the amount of diethylenetriaminepentaacetic acid (DTPA) extractable Pb in BC500, MBC500, and HBC500 decreased by 5.95, 12.39, and 13.55%, respectively, compared to CK. Freeze-thaw cycles and dry-wet alternations activated soil heavy metals, while modified biochar increased adsorption sites and oxygen-containing functional groups under aging conditions, inhibiting the fractions transformation of heavy metals. Furthermore, freeze-thaw cycles promoted the decomposition and mineralization of soil organic carbon (SOC), while sepiolite hindered the release of active carbon through ion exchange and adsorption complexation. Among them, and the soil dissolved organic carbon (DOC) content in HBC800 decreased by 49.39% compared to BC800. Additionally, the high-temperature pyrolyzed biochar (BC800) enhanced the porosity richness and alkalinity of material, which effectively inhibited the migration and transformation of heavy metals compared to BC500, and reduced the decomposition of soil DOC.

A Review of Remediation Strategies for Diphenyl Ether Herbicide Contamination

In agriculture, diphenyl ether herbicides are a broad-spectrum family of pesticides mainly used to control annual weeds in agriculture. Although diphenyl ether herbicides have a long-lasting effect in weed control, they can also be harmful to succeeding crops, as well as to the water and soil environment. Residual herbicides can also harm a large number of non-target organisms, leading to the death of pest predators and other beneficial organisms. Therefore, it is of great significance to control and remediate the contamination caused by diphenyl ether herbicide residues for the sake of environmental, nutritional, and biological safety. This review provides an overview of the techniques used for remediating diphenyl ether herbicide contamination, including biological, physical, and chemical remediation. Among these techniques, bioremediation, particularly microbial biodegradation technology, is extensively employed. The mechanisms and influencing factors of different remediation techniques in eliminating diphenyl ether herbicide contamination are discussed, together with a prospect for future development directions. This review serves as a scientific reference for the efficient remediation of residual contamination from diphenyl ether herbicides.

Sustainable management of campus fallen leaves through low-temperature pyrolysis and application in Pb immobilization

Realizing campus sustainability requires the environmental-friendly and economical treatment of tremendous fallen leaves. Producing fallen leaf biochar at a low temperature is a candidate approach. In this study, six common types of fallen leaves on the campus were pyrolyzed at 300 °C. The obtained biochars were characterized and the adsorption mechanisms of lead (Pb) by the fallen leaf biochars were investigated. The adsorption capacity of leaf biochar for Pb was relatively high, up to 209 mg/g (Yulania denudata leaf biochar). Adsorption of Pb onto active sites was the rate-limiting step for most leaf biochars. But for Platanus leaf biochar, intraparticle diffusion of Pb2+ dominated owing to the lowest adsorption capacity. However, the highest exchangeable Pb fraction (27%) indicated its potential for removing aqueous Pb2+. Ginkgo and Prunus cerasifera leaf biochar immobilized Pb by surface complexation and precipitation as lead oxalate. Hence, they were suitable for soil heavy metal remediation. This study shed the light on the sustainable utilization of campus fallen leaves and the application of fallen leaf biochars in heavy metal remediation.

Pyrolysis of biomass harvested from heavy-metal contaminated area: Characteristics of bio-oils and biochars from batch-wise one-stage and continuous two-stage pyrolysis

This study evaluates pyrolysis products obtained from biomasses (silver grass, pine, and acacia) harvested from heavy-metal-contaminated soil. To do so, we utilized two methods: a batch one-stage pyrolysis, and a continuous two-stage pyrolysis. The study results show that the yields and characteristics of bio-oils and biochars varied depending on the pyrolysis process and the type of biomass. The two-stage pyrolysis having two reactors (auger and fluidized bed reactors) appeared to be very suitable for specific chemicals production such as acetic acid, acetol, catechol, and levoglucosan. The biochar obtained from the fluidized-bed reactor of two-stage pyrolysis had high thermal stability, high crystallinity, high inorganic content, and a small number of functional groups. In contrast, the biochar obtained from the one-stage pyrolysis had low thermal stability, low crystallinity, a high carbon content, and a large number of functional groups. The biochar obtained from the two-stage pyrolysis appeared to be suitable as a material for catalyst support and as an adsorbent. The biochar obtained from one-stage pyrolysis appeared to be a suitable as a soil amendment, as an adsorbent, and as a precursor of activated carbon. All biochars showed a negative carbon footprint. In the end, this study, which was conducted using two different processes, was able to obtain the fact that products of pyrolysis biomass contaminated with heavy metals have different characteristics depending on the process characteristics and that their utilization plans are different accordingly. If the optimal utilization method proposed through this study is found, pyrolysis will be able to gain importance as an effective treatment method for biomass contaminated with heavy metals.

Effective removal of nitrate and phosphate using graphene nanosheets synthesized from waste plastics

In this work, waste plastics have been used with bentonite clay to produce silica-containing graphene nanosheets (GNs) for adsorption of nitrate and phosphate from synthetic water. The GNs were obtained by the two steps process, namely (1) pyrolysis at 750 °C and (2) ball milling. Then, GNs were characterized by Raman spectroscopy, FTIR, XRD, FESEM, HRTEM and EDX spectroscopy, which provided the details of material's morphology, surface properties, and composition. From Raman spectroscopy, D and G bands were found at 1342 cm-1 and 1594 cm-1, respectively, which confirmed the presence of nanosheets on the graphene surface. Furthermore, the layers of nanosheets were confirmed by the HRTEM analysis and XRD peaks. In analytical study, the batch experiment was conducted to investigate the influence of operational parameters such as pH (03-12), contact time (05-120 min), adsorbent dosage (0.01-0.06 g), and initial concentrations of adsorbates (10-50 mg/L for nitrate and 03-15 mg/L for phosphate) on adsorption process. The removal percentage of nitrate and phosphate at optimum dosage = 0.05 g, pH = 6.5, contact time = 60 min, nitrate concentration = 30 mg/L, and phosphate concentration = 09 mg/L were found to be 85 and 91, respectively. The highest adsorption capacity of nitrate and phosphate was found to be 53 mg/g and 16.4 mg/g, respectively. The adsorption behaviour of both nitrate and phosphate showed chemisorption as the experimental data were well fitted by the pseudo-2nd-order kinetic and Langmuir isotherm model. Life cycle cost analysis (LCCA) of the synthesis process was conducted to evaluate the cost-benefit analysis for commercial feasibility. The estimated price for the synthesis of GNs using 1 kg of waste plastics and bentonite clay as precursor was $4.21, suggesting commercialization.

Recovery of biochar particles laden with lead in saturated porous media by DC electric field

The co-transport behavior of environmental pollutants with biochar particles has aroused great interests from researchers due to the concerns about pollutant diffusion and environmental exposure after biochar is applied to soil. In this work, the recovery and co-transport behavior of biochar micron-/nano-particles (BCMP and BCNP) and lead (Pb2+) in saturated porous media were investigated under different ionic strength conditions (IS = 1, 5 and 10 mM) under a direct current electric field. The results showed that the electric field could significantly enhance the mobility of Pb adsorbed biochar particles, particularly BCNP. The recovery of Pb laden biochar particles was improved by 1.8 folds, reaching 78.8% at maximum under favorable condition at +0.5 V cm-1. According to the CDE (Convection-Dispersion-Equation) model and DLVO (Derjaguin-Landau-Verwey-Overbeek) theory analysis, the electric field facilitated the transport of Pb carried biochar mainly by increasing the negative charges on biochar surface and improving the repulsive force between biochar and porous media. High IS was favorable for biochar transport under the electric field, but inhibited desorbing Pb2+ from biochar (18% by maximum at IS = 10 mM). By switching the electric field power, a two-stage strategy was established to maximize the recovery of both biochar particles and Pb, where BCNP and Pb recovery were higher than electric field free case by 90% and 35%, respectively. The findings of this study can help build a biochar recovery approach to prevent potential risks from biochar application in heavy metal contaminated soil remediation.

Advancements in application of modified biochar as a green and low-cost adsorbent for wastewater remediation from organic dyes

Synthetic organic dyes, which are resistant to biodegradation, pose a notable health risk, potentially leading to cancer and respiratory infections. Researchers have addressed this concern by exploring physicochemical methods to remove organic dyes from wastewater. A particularly promising solution involves modified biochar adsorbents, which demonstrate high efficiency in organic dye removal. Biochar, a charcoal-like material derived from biomass pyrolysis, offers advantages such as low cost, eco-friendliness, high efficiency and reusability. Beyond its role in sustainable soil remediation, biochar proves effective in removing organic dyes from wastewater after undergoing physical or chemical modification. Acid-base activation or metal-heteroatom impregnation enhances biochar's adsorption capacity. This comprehensive review examines the attributes of biochar, common methods for production and modification, and the impacts of raw materials, pyrolysis temperature, heating rate and residence time. It further elucidates the biochar adsorption mechanism in the removal of organic dyes, assessing factors influencing efficiency, including biochar feedstock, solution pH, adsorption temperature, particle size, initial dye concentration, biochar dosage and reaction time. It explores challenges, opportunities, reusability and regeneration methods of biochar in treating organic dye wastewater. It also discusses recent advances in organic dye removal using adsorption-based biochar. The review ultimately advocates for enhancing biochar's adsorption performance through post-modification.

Simultaneous removal of Cd(II) and As(V) by ferrihydrite-biochar composite: Enhanced effects of As(V) on Cd(II) adsorption

The coexistence of cadmium (Cd(II)) and arsenate (As(V)) pollution has long been an environmental problem. Biochar, a porous carbonaceous material with tunable functionality, has been used for the remediation of contaminated soils. However, it is still challenging for the dynamic quantification and mechanistic understanding of the simultaneous sequestration of multi-metals in biochar-engineered environment, especially in the presence of anions. In this study, ferrihydrite was coprecipitated with biochar to investigate how ferrihydrite-biochar composite affects the fate of heavy metals, especially in the coexistence of Cd(II) and As(V). In the solution system containing both Cd(II) and As(V), the maximum adsorption capacities of ferrihydrite-biochar composite for Cd(II) and As(V) reached 82.03 µmol/g and 531.53 µmol/g, respectively, much higher than those of the pure biochar (26.90 µmol/g for Cd(II), and 40.24 µmol/g for As(V)) and ferrihydrite (42.26 µmol/g for Cd(II), and 248.25 µmol/g for As(V)). Cd(II) adsorption increased in the presence of As(V), possibly due to the changes in composite surface charge in the presence of As(V), and the increased dispersion of ferrihydrite by biochar. Further microscopic and mechanistic results showed that Cd(II) complexed with both biochar and ferrihydrite, while As(V) was mainly complexed by ferrihydrite in the Cd(II) and As(V) coexistence system. Ferrihydrite posed vital importance for the co-adsorption of Cd(II) and As(V). The different distribution patterns revealed by this study help to a deeper understanding of the behaviors of cations and anions in the natural environment.

Exploring the influence of invasive weed biochar on the sorption and dissipation dynamics of imazethapyr in sandy loam soil

The management of invasive weeds on both arable and non-arable land is a vast challenge. Converting these invasive weeds into biochar and using them to control the fate of herbicides in soil could be an effective strategy within the concept of turning waste into a wealth product. In this study, the fate of imazethapyr (IMZ), a commonly used herbicide in various crops, was investigated by introducing such weeds as biochar, i.e., Parthenium hysterophorus (PB) and Lantana camara (LB) in sandy loam soil. In terms of kinetics, the pseudo-second order (PSO) model provided the best fit for both biochar-mixed soils. More IMZ was sorbed onto LB-mixed soil compared to PB-mixed soil. When compared to the control (no biochar), both PB and LB biochars (at concentrations of 0.2% and 0.5%) increased IMZ adsorption, although the extent of this effect varied depending on the dosage and type of biochar. The Freundlich adsorption isotherm provided a satisfactory explanation for IMZ adsorption in soil/soil mixed with biochar, with the adsorption process exhibiting high nonlinearity. The values of Gibb's free energy change (ΔG) were negative for both adsorption and desorption in soil/soil mixed with biochar, indicating that sorption was exothermic and spontaneous. Both types of biochar significantly affect IMZ dissipation, with higher degradation observed in LB-amended soil compared to PB-amended soil. Hence, the findings suggest that the preparation of biochar from invasive weeds and its utilization for managing the fate of herbicides can effectively reduce the residual toxicity of IMZ in treated agroecosystems in tropical and subtropical regions.

Stabilization of PFAS-contaminated soil with sewage sludge- and wood-based biochar sorbents

Sustainable and effective remediation technologies for the treatment of soil contaminated with per- and polyfluoroalkyl substances (PFAS) are greatly needed. This study investigated the effects of waste-based biochars on the leaching of PFAS from a sandy soil with a low total organic carbon content (TOC) of 0.57 ± 0.04 % impacted by PFAS from aqueous film forming foam (AFFF) dispersed at a former fire-fighting facility. Six different biochars (pyrolyzed at 700-900 °C) were tested, made from clean wood chips (CWC), waste timber (WT), activated waste timber (aWT), two digested sewage sludges (DSS-1 and DSS-2) and de-watered raw sewage sludge (DWSS). Up-flow column percolation tests (15 days and 16 pore volume replacements) with 1 % biochar indicated that the dominant congener in the soil, perfluorooctane sulphonic acid (PFOS) was retained best by the aWT biochar with a 99.9 % reduction in the leachate concentration, followed by sludge-based DWSS (98.9 %) and DSS-2 and DSS-1 (97.8 % and 91.6 %, respectively). The non-activated wood-based biochars (CWC and WT) on the other hand, reduced leaching by <42.4 %. Extrapolating this to field conditions, 90 % leaching of PFOS would occur after 15 y for unamended soil, and after 1200 y and 12,000 y, respectively, for soil amended with 1 % DWSS-amended and aWT biochar. The high effectiveness of aWT and the three sludge-based biochars in reducing PFAS leaching from the soil was attributed largely to high porosity in a pore size range (>1.5 nm) that can accommodate the large PFAS molecules (>1.02-2.20 nm) combined with a high affinity to the biochar matrix. Other factors like anionic exchange capacity could play a contributing role. Sorbent effectiveness was better for long-chain than for short-chain PFAS, due to weaker, apolar interactions between the biochar and the latter's shorter hydrophobic CF2-tails. The findings were the first to demonstrate that locally sourced activated wood-waste biochars and non-activated sewage sludge biochars could be suitable sorbents for the ex situ stabilization and in situ remediation of PFAS-contaminated soil, bringing this technology one step closer to full-scale field testing.

Comparison of water-soluble organic matter (WSOM)-containing and WSOM-free biochars for simultaneous sorption of lead and cadmium

The effects of individual biochar constituents and natural environmental media on the immobilization behaviors and chemical activities of toxic heavy metals are still poorly understood. In this work, the physicochemical properties of raw corn straw (CS) and CS-derived biochar materials as well as their sorption abilities and retention mechanisms for lead (Pb) and cadmium (Cd) were evaluated by combining batch experiments and spectral approaches. According to the spectral analysis results and single variable principle, the setting of biochars after soaking in solution as the control group was suggested when evaluating their retention mechanisms for Pb and Cd. The rising of ionic strength did not apparently affect the immobilization of Pb by biochar prepared at 500 °C (i.e., CB500) and Pb/Cd by water-soluble organic matter (WSOM)-free CB500 (i.e., DCB500), while slightly inhibited the sorption of Cd by CB500. Pb and Cd exhibited a mutual inhibition effect on their sorption trends with a higher sorption preference of Pb. The dominant fixation mechanism of Pb by CB500 and DCB500 was identified to be mineral precipitation. In contrast, the main sorption mechanism of Cd changed from mineral precipitation in the single-metal system to surface complexation in the binary-metal system. The sorption ratios of Pb and Cd on CB500 were comparable to those on DCB500 with the coexistence of mixed natural organic matters (NOM) and ferrihydrite. The current experimental findings suggested that DCB500 was a suitable remediation agent for regulating the migration behaviors of toxic Pb and Cd in acidic and NOM-rich soil and water systems.

Fast and efficient As(III) removal from water by bifunctional nZVI@NBC

As a notable toxic substance, metalloid arsenic (As) widely exists in water body and drinking As-contaminated water for an extended period of time can result in serious health concerns. Here, the performance of nanoscale zero-valent iron (nZVI) modified N-doped biochar (NBC) composites (nZVI@NBC) activated peroxydisulfate (PDS) for As(III) removal was investigated. The removal efficiencies of As(III) with initial concentration ranging from 50 to 1000 μg/L were above 99% (the residual total arsenic below 10 μg/L, satisfying the contaminant limit for arsenic in drinking water) within 10 min by nZVI@NBC (0.2 g/L)/PDS (100 μM). As(III) removal efficiency influenced by reaction time, PDS dosage, initial concentration, pH, co-existing ions, and natural organic matter in nZVI@NBC/PDS system were investigated. The nZVI@NBC composite is magnetic and could be conveniently collected from aqueous solutions. In practical applications, nZVI@NBC/PDS has more than 99% As(III) removal efficiency in various water bodies (such as deionized water, piped water, river water, and lake water) under optimized operation parameters. Radical quenching and EPR analysis revealed that SO4·- and ·OH play important roles in nZVI@NBC/PDS system, and the possible reaction mechanism was further proposed. These results suggest that nZVI@NBC activated peroxydisulfate may be an efficient and fast approach for the removal of water contaminated with As(III).

Zea mays cultivation, biochar, and arbuscular mycorrhizal fungal inoculation influenced lead immobilization

Plant cultivation can influence the immobilization of heavy metals in soil. However, the roles of soil amendments and microorganisms in crop-based phytoremediation require further exploration. In this study, we evaluated the impact of Zea mays L. cultivation, biochar application, and arbuscular mycorrhizal fungi (AMF) inoculation on soil lead (Pb) immobilization. Our results indicated that biochar addition resulted in a significant, 42.00%, reduction in AMF colonization. Plant cultivation, AMF inoculation, and biochar addition all contributed to enhanced Pb immobilization, as evidenced by decreased levels of diethylenetriaminepentaacetic acid- and CaCl2-extractable Pb in the soil. Furthermore, soil subjected to plant cultivation with AMF and biochar displayed reduced concentrations of bioavailable Pb. Biochar addition altered the distribution of Pb fractions in the soil, transforming the acid-soluble form into the relatively inert reducible and oxidizable forms. Additionally, biochar, AMF, and their combined use promoted maize growth parameters, including height, stem diameter, shoot and root biomass, and phosphorus uptake, while simultaneously reducing the shoot Pb concentration. These findings suggest a synergistic effect in Pb phytostabilization. In summary, despite the adverse impact of biochar on mycorrhizal growth, cultivating maize with the concurrent use of biochar and AMF emerges as a recommended and effective strategy for Pb phytoremediation.IMPORTANCEHeavy metal contamination in soil is a pressing environmental issue, and phytoremediation has emerged as a sustainable approach for mitigating this problem. This study sheds light on the potential of maize cultivation, biochar application, and arbuscular mycorrhizal fungi (AMF) inoculation to enhance the immobilization of Pb in contaminated soil. The findings demonstrate that the combined use of biochar and AMF during maize cultivation can significantly improve Pb immobilization and simultaneously enhance maize growth, offering a promising strategy for sustainable and effective Pb phytoremediation practices. This research contributes valuable insights into the field of phytoremediation and its potential to address heavy metal pollution in agricultural soils.

Application of machine learning in prediction of Pb2+ adsorption of biochar prepared by tube furnace and fluidized bed

Data mining by machine learning (ML) has recently come into application in heavy metals purification from wastewater, especially in exploring lead removal by biochar that prepared using tube furnace (TF-C) and fluidized bed (FB-C) pyrolysis methods. In this study, six ML models including Random Forest Regression (RFR), Gradient Boosting Regression (GBR), Support Vector Regression (SVR), Kernel Ridge Regression (KRR), Extreme Gradient Boosting (XGB), and Light Gradient Boosting Machine (LGBM) were employed to predict lead adsorption based on a dataset of 1012 adsorption experiments, comprising 422 TF-C groups from our experiments and 590 FB-C groups from literatures. The XGB model showed superior accuracy and predictive performance for adsorption, achieving R2 values for TF-C (0.992) and FB-C (0.981), respectively. Contrasting inferior results were observed in other models, including RF (0.962 and 0.961), GBR (0.987 and 0.975), SVR (0.839 and 0.763), KRR (0.817 and 0.881), and LGBM (0.975 and 0.868). Additionally, a hybrid dataset combining both biochars in Pb adsorption also indicated high accuracy (0.972) as obtained from XGB model. The investigation revealed that the influence of char characteristics and adsorption conditions on Pb adsorption differs between the two biochar. Specific char characteristics, particularly nitrogen content, significantly influence lead adsorption in both biochar. Interestingly, the influence of pyrolysis temperature (PT) on lead adsorption is found to be greater for TF-C than for FB-C. Consequently, careful consideration of PT is crucial when preparing TF-C biochar. These findings offer practical guidance for optimizing biochar preparation conditions during heavy metal removal from wastewater.

Coupling of biogas residue biochar and low-magnitude electric fields promotes anaerobic co-digestion of sewage sludge and food waste

Biochar-assisted anaerobic digestion (AD) remains constrained due to the inefficient decomposition of complex organics, even with the direct interspecies electron transfer (DIET) pathway. The coupling of electrochemistry with the anaerobic biological treatment could shorten lengthy retention time in co-digestion by improving electron transfer rates and inducing functional microbial acclimation. Thus, this work investigated the potential of improving the performance of AD by coupling low-magnitude electric fields with biochar derived from the anaerobically digested biogas residue. Different voltages (0.3, 0.6, and 0.9 V) were applied at various stages to assess the impact on biochar-assisted AD. The results indicate that an external voltage of 0.3 V, coupled with 5 g/L of biochar, elevates CH4 yield by 45.5% compared to biogas residue biochar alone, and the coupled approach increased biogas production by up to 143% within 10 days. This finding may be partly explained by the enhanced utilization of substrates and the increased amounts of specific methanogens such as Methanobacterium and Methanosarcina. The abundance of the former increased from 4.0 to 11.3%, which enhances the DIET between microorganisms. Furthermore, the coupling method shows better potential for enhancing AD compared to preparing iron-based biochar, and these results present potential avenues for its broader applications.

Effect of pyrolysis temperature on the binding characteristics of DOM derived from livestock manure biochar with Cu(II)

Biochar-derived dissolved organic matter (BDOM) has the potential to influence the environmental application of biochar and the behavior of heavy metals. In this study, the binding properties of BDOM derived from livestock manure biochar at different pyrolysis temperatures with Cu(II) were investigated based on a multi-analytical approach. The results showed that the DOC concentration, aromatics, and humification degree of BDOM were higher in the process of low pyrolysis of biochar. The pyrolysis temperature changed the composition of BDOM functional groups, which affected the binding mechanism of BDOM-Cu(II). Briefly, humic-like and protein-like substances dominated BDOM-Cu(II) binding at low and high pyrolysis temperatures, respectively. The higher binding capacity for Cu(II) was exhibited by BDOM derived from the lower pyrolysis temperature, due to the carboxyl as the main binding site in humic acid had high content and binding ability at low-temperature. The amide in proteins only participated in the BDOM-Cu(II) binding at high pyrolysis temperature, and polysaccharides also played an important role in the binding process. Moreover, the biochar underwent the secondary reaction at certain high temperatures, which led to condensation reaction of the aromatic structure and the conversion of large molecules into small molecules, affecting the BDOM-Cu(II) binding sites.

Biochar-based materials as remediation strategy in petroleum hydrocarbon-contaminated soil and water: Performances, mechanisms, and environmental impact

Petroleum contamination is considered as a major risk to the health of humans and environment. Biochars as low-cost and eco-friendly carbon materials, have been widely used for the removal of petroleum hydrocarbon in the environment. The purpose of this paper is to review the performance, mechanisms, and potential environmental toxicity of biochar, modified biochar and its integration use with other materials in petroleum contaminated soil and water. Specifically, the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated. In addition, the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption, biodegradation, chemical degradation, and reusability. Moreover, the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated. Finally, some shortcoming of current approaches, and future research needs were provided for the future direction and challenges of modified biochar research. Overall, this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.

Biochar-Derived Persistent Free Radicals: A Plethora of Environmental Applications in a Light and Shadows Scenario

Biochar (BC) is a carbonaceous material obtained by pyrolysis at 200-1000 °C in the limited presence of O2 from different vegetable and animal biomass feedstocks. BC has demonstrated great potential, mainly in environmental applications, due to its high sorption ability and persistent free radicals (PFRs) content. These characteristics enable BC to carry out the direct and PFRs-mediated removal/degradation of environmental organic and inorganic contaminants. The types of PFRs that are possibly present in BC depend mainly on the pyrolysis temperature and the kind of pristine biomass. Since they can also cause ecological and human damage, a systematic evaluation of the environmental behavior, risks, or management techniques of BC-derived PFRs is urgent. PFRs generally consist of a mixture of carbon- and oxygen-centered radicals and of oxygenated carbon-centered radicals, depending on the pyrolytic conditions. Here, to promote the more productive and beneficial use of BC and the related PFRs and to stimulate further studies to make them environmentally safer and less hazardous to humans, we have first reviewed the most common methods used to produce BC, its main environmental applications, and the primary mechanisms by which BC remove xenobiotics, as well as the reported mechanisms for PFR formation in BC. Secondly, we have discussed the environmental migration and transformation of PFRs; we have reported the main PFR-mediated application of BC to degrade inorganic and organic pollutants, the potential correlated environmental risks, and the possible strategies to limit them.

Fabrication of date palm kernel biochar-sulfur (DPKB-S) for super adsorption of methylene blue dye from water

A novel form of biochar was created by dehydration of Date palm kernel with 85% sulfuric acid. It was examined how the newly produced biochar (DPKB-S) affected the aqueous solution's capacity to extract Methylene Blue (MB) dye. The prepared DPKB-S was categorized by BET, BJH, FT-IR, SEM, EDX, DSC, and TGA analyses. The ideal pH for the MB dye adsorption by DPKB-S is 8. With 0.75 g L-1 of DPKB-S and an initial concentration of 50 ppm MB dye, Date Palm Kernel Biochar-Sulfur (DPKB-S) had the highest removal percentage of 100%. The Langmuir and Freundlich isotherm models were used to investigate the collected data. Freundlich model is the model that best covers MB dye adsorption in DPKB-S at low concentrations (0.75-1.25 g L-1) and the Langmuir model at high concentrations (1.5-1.75 g L-1). The Langmuir model maximum adsorption capacity (Qm) of the DPKB-S was 1512.30 mg g-1. Furthermore, a variety of error function models were applied to investigate the isotherm models derived data, including Marquardt's percent standard deviation (MPSD), the sum of absolute errors (EABS), the sum of the errors squared (ERRSQ), root mean square errors (RMS), Chi-square error (X2), the average relative error (ARE), average percent errors (APE), and hybrid error function (HYBRID). Kinetic data were calculated by intraparticle diffusion (IPD), pseudo-second-order (PSO), pseudo-first-order (PFO), and film diffusion (FD) models. A PSO rate model with a strong correlation (R2 = 1.00) largely regulated the adsorption rate. The removal mechanism of MB dye by DPKB-S is based on the principle that these positively charged dyes are attracted by electrostatic attraction forces due to the growth in the number of negatively charged regions at basic pH value. According to the results, DPKB-S shows promise as an affordable and competent adsorbent for the adsorption of MB dye. It can be used frequently without experiencing a discernible decrease in adsorption efficiency.

Definitive Review of Nanobiochar

Nanobiochar is an advanced nanosized biochar with enhanced properties and wide applicability for a variety of modern-day applications. Nanobiochar can be developed easily from bulk biochar through top-down approaches including ball-milling, centrifugation, sonication, and hydrothermal synthesis. Nanobiochar can also be modified or engineered to obtain "engineered nanobiochar" or biochar nanocomposites with enhanced properties and applications. Nanobiochar provides many fold enhancements in surface area (0.4-97-times), pore size (0.1-5.3-times), total pore volume (0.5-48.5-times), and surface functionalities over bulk biochars. These enhancements have given increased contaminant sorption in both aqueous and soil media. Further, nanobiochar has also shown catalytic properties and applications in sensors, additive/fillers, targeted drug delivery, enzyme immobilization, polymer production, etc. The advantages and disadvantages of nanobiochar over bulk biochar are summarized herein, in detail. The processes and mechanisms involved in nanobiochar synthesis and contaminants sorption over nanobiochar are summarized. Finally, future directions and recommendations are suggested.

Adsorptive behavior of engineered biochar /hydrochar for tetracycline removal from synthetic wastewater

In this research, engineered biochar and hydrochar derived from paddy husk were compared for the adsorption tetracycline (TC) in water effluents. Biochar was produced at three different pyrolysis temperatures (e.g., 250 °C, 300 °C and 350 °C) while hydrochar was produced using three different HTC temperatures (e.g., 180 °C, 200 °C and 220 °C). The adsorptive experiments were performed for both biochar and hydrochar using well-defined experimental conditions: pH (3); initial TC concentration (10 mg/L); adsorbent dosage (1 g/L); and temperature (27 °C) to study their adsorptive performances (qe in mg/g). After selecting the best qe values for both biochar and hydrochar, both materials were modified using 20% H3PO4. A comprehensive scientific evaluation of both engineered biochar (EBC 350) and hydrochar (EHC 220) was performed using adsorption isotherm, adsorption kinetics, rate-limiting, and thermodynamics tests along with their characterization using FTIR and point of zero charge (pzc). The effects of temperature, dosage, and initial TC concentration on the adsorption process were studied for both EBC 350 and EHC 220. Acid activation improved the adsorptive performance of EHC 220 almost four times (from 1.9 to 7.5 mg/g), whereas adsorptive performance of EBC 350 improved 2.4 times from 3.8 to 9.1 mg/g. The best pH for TC adsorption onto EHC 220 was 5, whereas it was 3 for EBC 350. EBC 350 exhibited a good fit with the Freundlich model, whereas EHC 220 followed the Langmuir model. At 100 mg/L TC concentration, EHC 220 exhibited higher qe value (46.9 mg/g) compared to EBC 350 (41.7 mg/g). The Pseudo-first order kinetic model was the best fit for EHC 220 adsorption, whereas Pseudo-second order model was most suitable for EBC 350. The adsorption mechanisms involved in TC adsorption by EHC 220 included hydrogen bonding, hydrophobic effect, and π-π interaction, whereas cation exchange, mass diffusion, and π-π interaction were involved for EBC 350. The results of this study will facilitate the development of cost-effective filters with the incorporation of engineered biochar/engineered hydrochar for the active removal of emerging contaminants, like tetracycline, from wastewater so as to increase its reusable potential.

Dairy Effluent-Saturated Biochar's Short-Term Effects on Vigna unguiculata and Cynodon dactylon Performance and Soil Properties

We compared the effects of wood-, manure-, and blend-derived biochar (BC) saturated/unsaturated with dairy effluents on Vigna unguiculata and Cynodon dactylon performance and soil characteristics in a greenhouse pot study. Plant samples were assayed for herbage and root dry weight and N and C percentages. Soil samples were assayed for nutrients, pH, and conductivity. Variance analysis, Tukey's tests, Pearson's correlations, and multiple regression analysis were performed. The performance of C. dactylon was not affected. V. unguiculata's herbage and root production responded negatively to manure BC and 2% of any BC, respectively, which is mainly explained by the conductivity and soil P increase, respectively. When V. unguiculata was grown, BC inclusion decreased NO3-N and increased the soil P content. When C. dactylon was grown, only P was altered (increased) when manure or the blend BC were applied. The soil total C increased as the BC loading rate increased. The application of high BC rates was detrimental for V. unguiculata, but showed a neutral effect for C. dactylon. To improve dairy waste recycling, saturated 1% blend BC and saturated 2% blend or manure BC could be applied to V. unguiculata and C. dactylon, respectively, with no short-term negative impacts. Only wood BC avoided soil P build-up. BC application increased the soil total C, showing potential for C sequestration.

Comparison of Oil-Seed Shell Biomass-Based Biochar for the Removal of Anionic Dyes-Characterization and Adsorption Efficiency Studies

This research investigated the synthesis of biochar through the direct pyrolysis of pre-roasted sunflower seed shells (SFS) and peanut shells (PNS) and compared their application for the effective removal of textile dyes from wastewater. Biochar prepared at 900 °C (SFS900 and PNS900) showed the highest adsorption capacity, which can be attributed to the presence of higher nitrogen content and graphite-like structures. CHNS analysis revealed that PNS900 exhibited an 11.4% higher carbon content than SFS900, which enhanced the environmental stability of PNS biochar. Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses of the produced biochar indicated the degradation of cellulosic and lignin moieties. X-ray photoelectron spectroscopy (XPS) revealed a 13.8% and 22.6% increase in C-C/C=C mass concentrations in the SFS900 and PNS900, respectively, and could be attributed to the condensation of polyaromatic structures. Batch experiments for dye removal demonstrated that irrespective of dye species, PNS900 exhibited superior dye removal efficiency compared to SFS900 at similar dosages. In addition to H-bonding and electrostatic interactions, the presence of pyridinic-N and graphitic-N can play a vital role in enhancing Lewis acid-base and π-π EDA interactions. The results can provide valuable insights into the biochar-dye interaction mechanisms.

Phytoremediation of contaminated sediment combined with biochar: Feasibility, challenges and perspectives

The accumulation of contaminants in sediments is accelerated by human activities and poses a major threat to ecosystems and human health. In recent years, various remediation techniques have been developed for contaminated sediments. In this review, a bibliometric analysis of papers on sediment remediation indexed in the WOS database between 2009 and 2023 was conducted using VOSviewer. We describe the development of biochar and plants for sediment contaminant removal. However, the single processes of biochar remediation and phytoremediation can be impeded by (i) low efficiency, (ii) poor tolerance of plants towards pollutants, (iii) difficulty in biochar to degrade pollutants, and (iv) biochar aging causing secondary pollution. Fortunately, combination remediation, realized through the combination of biochar and plants, can overcome the shortcomings of their individual applications. Therefore, we suggest that the remediation of contaminants in sediments can be accomplished by combining biochar with macrophytes and considering multiple limiting factors. Here, we explore the challenges that co-remediation with biochar and macrophytes will face in achieving efficient and sustainable sediment remediation, including complex sediment environments, interaction mechanisms of biochar-macrophyte-microorganisms, emerging pollutants, and integrated life cycle assessments, which can provide references for combined biochar and plant remediation of sediments in the future.

Mechanisms of adsorption and functionalization of biochar for pesticides: A review

Agricultural production relies heavily on pesticides. However, factors like inefficient application, pesticide resistance, and environmental conditions reduce their effective utilization in agriculture. Subsequently, pesticides transfer into the soil, adversely affecting its physicochemical properties, microbial populations, and enzyme activities. Different pesticides interacting can lead to combined toxicity, posing risks to non-target organisms, biodiversity, and organism-environment interactions. Pesticide exposure may cause both acute and chronic effects on human health. Biochar, with its high specific surface area and porosity, offers numerous adsorption sites. Its stability, eco-friendliness, and superior adsorption capabilities render it an excellent choice. As a versatile material, biochar finds use in agriculture, environmental management, industry, energy, and medicine. Added to soil, biochar helps absorb or degrade pesticides in contaminated areas, enhancing soil microbial activity. Current research primarily focuses on biochar produced via direct pyrolysis for pesticide adsorption. Studies on functionalized biochar for this purpose are relatively scarce. This review examines biochar's pesticide absorption properties, its characteristics, formation mechanisms, environmental impact, and delves into adsorption mechanisms, functionalization methods, and their prospects and limitations.

Effects of different aging methods on the ability of biochar to adsorb heavy metal cadmium and its physical and chemical properties

The aging process can affect the physical and chemical properties as well as adsorption capacity of biochar. This study focuses on the heavy metal cadmium (Cd) as the research object, and artificially ages biochar prepared from rice straw and corn straw through accelerated freeze-thaw cycles, alternating dry wet cycles, and ultraviolet light treatment, in order to evaluate the effects of different aging conditions on the physical and chemical properties of the two different types of biochar and on their adsorption capacities for Cd. After aging, the pH of rice and corn biochar decreased to varying degrees, respectively. The surface structure was ruptured, the average pore diameter was decreased, and the specific surface area was increased by 27.3%, 21.9%, and 9.8% (rice) and 95.4%, 27.7%, and 13.4% (corn). Ultraviolet light aging has the most significant impact on the elemental content of biochar, and the C content was decreased by 12.4% (rice) and 9.3% (corn). The O content was increased by 11.2% (rice) and 44.1% (corn), and the numbers of O/C, H/C, (O + N)/C, and oxygen-containing functional groups were increased. These results demonstrate that the aging process reduces the degree of aromatization of biochar, while enhancing its polarity and Cd adsorption capacity. Rice straw biochar (RSB) has a greater ability to adsorb Cd than corn straw biochar (CSB). In addition, ultraviolet light aging is particularly effective in increasing heavy metal adsorption.

Phthalates contamination in sediments: A review of sources, influencing factors, benthic toxicity, and removal strategies

Sediments provide habitat and food for benthos, and phthalates (PAEs) have been detected in numerous river and marine sediments as a widely used plastic additive. PAEs in sediments is not only toxic to benthos, but also poses a threat to pelagic fish and human health through the food chain, so it is essential to comprehensively assess the contamination of sediments with PAEs. This paper presents a critical evaluation of PAEs in sediments, which is embodied in the analysis of the sources of PAEs in sediments from multiple perspectives. Biological production is indispensable, while artificial synthesis is the most dominant, thus the focus was on analyzing the industrial and commercial sources of synthetic PAEs. In addition, since the content of PAEs in sediments varies, some factors affecting the content of PAEs in sediments are summarized, such as the properties of PAEs, the properties of plastics, and environmental factors (sediments properties and hydrodynamic conditions). As endocrine disruptors, PAEs can produce toxicity to its direct contacts. Therefore, the effects of PAEs on benthos immunity, endocrinology, reproduction, development, and metabolism were comprehensively analyzed. In addition, we found that reciprocal inhibition and activation of the systems lead to genotoxicity and apoptosis. Finally, the paper discusses the feasible measures to control PAEs in wastewater and leachate from the perspective of source control, and summarizes the in-situ treatment measures for PAEs contamination in sediments. This paper provides a comprehensive review of PAEs contamination in sediments, toxic effects and removal strategies, and provides an important reference for reducing the contamination and toxicity of PAEs to benthos.

Effects of Fe-modified digestate hydrochar at different hydrothermal temperatures on anaerobic digestion of swine manure

Hydrothermal carbonization temperature is a key factor in controlling the physico-chemical properties of hydrochar and affecting its function. In this study, effects of hydrochar and Fe-modified hydrochar (Fe-HC) prepared at 180 °C (180C-Fe), 220 °C (220C-Fe) and 260 °C (260C-Fe) on anaerobic digestion (AD) performance of swine manure was investigated. Among the three Fe-HCs, 220C-Fe had the highest amount of Fe and Fe2+ on the surface. The relative methane production of control reached 174 %-189 % in the 180C-Fe and 220C-Fe treatments between days 11 and 12. The degradation efficiency of swine manure was highest in the 220C-Fe treatment (61.3 %), which was 14.8 % higher than in the control. Fe-HC could act as an electron shuttle, stimulate the coenzyme F420 formation, increase the relative abundance of Methanosarcina and promote electron transport for acetotrophic methanogenesis in the AD. These findings are helpful for designing an efficient process for treating swine manure and utilizing digestate.