Biosensing based on surface plasmon resonance and living cells

Study of cell and drug interactions based on dual-mode detection using SPR and fluorescence imaging

The investigation of the interactions between cells and drugs forms a crucial aspect of biological and clinical medical studies. Generally, single-cell or local-cellular studies require a microscopic imaging system with high magnifications, which suffers from low detection throughputs and poor time responses. The study presented in this paper combined SPR and fluorescence to achieve cell localization, real-time monitoring of cell images and quantitative analysis of drugs. In order to obtain more comprehensive, accurate and real-time data, a dual-mode system based on surface plasmon resonance (SPR) and fluorescence was constructed based on a 4× magnification lens. This enables simultaneous studies of an entire cell and a specific region of the cell membrane. An adaptive adjustment algorithm was established for distorted SPR images, achieving temporal and spatial matching of the dual-mode detection. The combination of SPR and fluorescence not only achieved micro-detection but also complemented the qualitative or quantitative limitations of SPR or fluorescence method alone. In system characterization, the response signal of SPR was noticed to increase with the increasing concentration of EGF in stimulated cells. It indicated that this platform could be employed for quantitative detection of the cell membrane region. Upon addition of EGF, a peak in the SPR curve was observed, and the cells in the corresponding SPR image turned whiter. This indicated that the platform can simultaneously monitor the SPR response signal and image changes. The response time of fluorescence in EGF testing was several seconds earlier than SPR, revealing that signal transduction first occurred in the whole cell and then propagated to the cell membrane region. The inhibitory ability of Gefitinib on cells was verified in a fast and real-time manner within 20 min. The results indicated that the detection limit of this method was 20 IU/mL for EGF and 10 µg/mL for Gefitinib. In conclusion, this study demonstrates the advantages of SPR and fluorescence dual-mode techniques in the analysis of cell-drug interactions, as well as their strong potential in drug screening.

Functional Plasmonic Microscope: Characterizing the Metabolic Activity of Single Cells via Sub-nm Membrane Fluctuations

Metabolic abnormalities are at the center of many diseases, and the capability to film and quantify the metabolic activities of a single cell is important for understanding the heterogeneities in these abnormalities. In this paper, a functional plasmonic microscope (FPM) is used to image and measure metabolic activities without fluorescent labels at a single-cell level. The FPM can accurately image and quantify the subnanometer membrane fluctuations with a spatial resolution of 0.5 μm in real time. These active cell membrane fluctuations are caused by metabolic activities across the cell membrane. A three-dimensional (3D) morphology of the bottom cell membrane was imaged and reconstructed with FPM to illustrate the capability of the microscope for cell membrane characterization. Then, the subnanometer cell membrane fluctuations of single cells were imaged and quantified with the FPM using HeLa cells. Cell metabolic heterogeneity is analyzed based on membrane fluctuations of each individual cell that is exposed to similar environmental conditions. In addition, we demonstrated that the FPM could be used to evaluate the therapeutic responses of metabolic inhibitors (glycolysis pathway inhibitor STF 31) on a single-cell level. The result showed that the metabolic activities significantly decrease over time, but the nature of this response varies, depicting cell heterogeneity. A low-concentration dose showed a reduced fluctuation frequency with consistent fluctuation amplitudes, while the high-concentration dose showcased a decreasing trend in both cases. These results have demonstrated the capabilities of the functional plasmonic microscope to measure and quantify metabolic activities for drug discovery.

A review of electrochemical impedance as a tool for examining cell biology and subcellular mechanisms: merits, limits, and future prospects

Herein the development of cellular impedance biosensors, electrochemical impedance spectroscopy, and the general principles and terms associated with the cell-electrode interface is reviewed. This family of techniques provides quantitative and sensitive information into cell responses to stimuli in real-time with high temporal resolution. The applications of cell-based impedance biosensors as a readout in cell biology is illustrated with a diverse range of examples. The current state of the field, its limitations, the possible available solutions, and the potential benefits of developing biosensors are discussed.

Life in an optical fiber: Monitoring of cell cultures with microcavity in-line Mach-Zehnder interferometer

Monitoring cell adhesion and growth are crucial for various applications involving drug screening, cytotoxicity, and cytocompatibility studies. However, acquiring accurate information about the growing state and responsiveness to a treatment of a cell system in a real-time and label-free manner is still a challenge. This work presents the first research on direct, real-time, and label-free adherent cell culture monitoring using a microcavity in-line Mach-Zehnder interferometer (μIMZI) fabricated in an optical fiber. The sensing solution based on μIMZI offers a great advantage over many other monitoring concepts tracking the changes taking place on the microcavity's bottom surface and within its volume, thus offering a greater penetration depth. In this study, we verified performance of the approach using a non-cancer bone marrow stromal cell line HS-5. The results demonstrate that the changes of the acquired signal are closely related to the different states of cells' adhesion, proliferation, morphology, and variation of mass. Thus, this label-free, real-time μIMZI-based monitoring technique gives a great promise to the analysis or monitoring of relevant new treatments in future scientific, as well as clinical applications.

Mechanisms of Influenza Virus HA2 Peptide Interaction with Liposomes Studied by Dual-Wavelength MP-SPR

A phospholipid-based liposome layer was used as an effective biomimetic membrane model to study the binding of the pH-dependent fusogenic peptide (E4-GGYC) from the influenza virus hemagglutinin HA2 subunit. To this end, a multiparameter surface plasmon resonance approach (MP-SPR) was used for monitoring peptide-liposome interactions at two pH values (4.5 and 8) by means of recording sensorgrams in real time without the need for labeling. Biotinylated liposomes were first immobilized as a monolayer onto the surface of an SPR gold chip coated with a streptavidin layer. Multiple sets of sensorgrams with different HA2 peptide concentrations were generated at both pHs. Dual-wavelength Fresnel layer modeling was applied to calculate the thickness (d) and the refractive index (n) of the liposome layer to monitor the change in its optical parameters upon interaction with the peptide. At acidic pH, the peptide, in its α helix form, entered the lipid bilayer of liposomes, inducing vesicle swelling and increasing membrane robustness. Conversely, a contraction of liposomes was observed at pH 8, associated with noninsertion of the peptide in the double layer of phospholipids. The equilibrium dissociation constant KD = 4.7 × 10-7 M of the peptide/liposome interaction at pH 4.5 was determined by fitting the "OneToOne" model to the experimental sensorgrams using Trace Drawer software. Our experimental approach showed that the HA2 peptide at a concentration up to 100 μM produced no disruption of liposomes at pH 4.5.

A Versatile, Incubator-Compatible, Monolithic GaN Photonic Chipscope for Label-Free Monitoring of Live Cell Activities

The ability to quantitatively monitor various cellular activities is critical for understanding their biological functions and the therapeutic response of cells to drugs. Unfortunately, existing approaches such as fluorescent staining and impedance-based methods are often hindered by their multiple time-consuming preparation steps, sophisticated labeling procedures, and complicated apparatus. The cost-effective, monolithic gallium nitride (GaN) photonic chip has been demonstrated as an ultrasensitive and ultracompact optical refractometer in a previous work, but it has never been applied to cell studies. Here, for the first time, the so-called GaN chipscope is proposed to quantitatively monitor the progression of different intracellular processes in a label-free manner. Specifically, the GaN-based monolithic chip enables not only a photoelectric readout of cellular/subcellular refractive index changes but also the direct imaging of cellular/subcellular ultrastructural features using a customized differential interference contrast (DIC) microscope. The miniaturized chipscope adopts an ultracompact design, which can be readily mounted with conventional cell culture dishes and placed inside standard cell incubators for real-time observation of cell activities. As a proof-of-concept demonstration, its applications are explored in 1) cell adhesion dynamics monitoring, 2) drug screening, and 3) cell differentiation studies, highlighting its potential in broad fundamental cell biology studies as well as in clinical applications.

Curcumin encapsulation in functional PLGA nanoparticles: A promising strategy for cancer therapies

Nanoparticles have emerged as promising drug delivery systems for the treatment of several diseases. Novel cancer therapies have exploited these particles as alternative adjuvant therapies to overcome the traditional limitations of radio and chemotherapy. Curcumin is a natural bioactive compound found in turmeric, that has been reported to show anticancer activity against several types of tumors. Despite some biological limitations regarding its absorption in the human body, curcumin encapsulation in poly(lactic-co-glycolic acid) (PLGA), a non-toxic, biodegradable and biocompatible polymer, represents an effective strategy to deliver a drug to a tumor site. Furthermore, PLGA nanoparticles can be engineered with targeting moieties to reach specific cancer cells, thus enhancing the antitumor effects of curcumin. We herein aim to bring an up-to-date summary of the recently developed strategies for curcumin delivery to different types of cancer cells through encapsulation in PLGA nanoparticles, correlating their effects with those of curcumin on the biological capabilities acquired by cancer cells (cancer hallmarks). We discuss the targeting strategies proposed for advanced curcumin delivery and the respective improvements achieved for each cancer cell analyzed, in addition to exploring the encapsulation techniques employed. The conjugation of correct encapsulation techniques with tumor-oriented targeting design can result in curcumin-loaded PLGA nanoparticles that can successfully integrate the elaborate network of development of alternative cancer treatments along with traditional ones. Finally, the current challenges and future demands to launch these nanoparticles in oncology are comprehensively examined.

Recent progress in sensing application of metal nanoarchitecture-enhanced fluorescence

Fluorescence analytical methods, as real time and in situ analytical approaches to target analytes, can offer advantages of high sensitivity/selectivity, great versatility, non-invasive measurement and easy transmission over long distances. However, the conventional fluorescence assay still suffers from low specificity, insufficient sensitivity, poor reliability and false-positive responses. By exploiting various metal nanoarchitectures to manipulate fluorescence, both increased fluorescence quantum yield and improved photostability can be realized. This metal nanoarchitecture-enhanced fluorescence (MEF) phenomenon has been extensively studied and used in various sensors over the past years, which greatly improved their sensing performance. Thus in this review, we primarily give a general overview of MEF based sensors from mechanisms to state-of-the-art applications in environmental assays, biological/medical analysis and diagnosis areas. Finally, their pros and cons as well as further development directions are also discussed.

Real-time and wide-field mapping of cell-substrate adhesion gap and its evolution via surface plasmon resonance holographic microscopy

As one of the most common biological phenomena, cell adhesion plays a vital role in the cellular activities such as the growth and apoptosis, attracting tremendous research interests over the past decades. Taking the cell evolution under drug injection as an example, the dynamics of cell-substrate adhesion gap can provide valuable information in the fundamental research of cell contacts. A robust technique of monitoring the cell adhesion gap and its evolution in real time is highly desired. Herein, we develop a surface plasmon resonance holographic microscopy to achieve the novel functionality of real-time and wide-field mapping of the cell-substrate adhesion gap and its evolution in situ. The cell adhesion gap images of mouse osteoblast cells and human breast cancer cells have been effectively extracted in a dynamic and label-free manner. The proposed technique opens up a new avenue of revealing the cell-substrate interaction mechanism and renders the wide applications in the biosensing area.

Emergent Biosensing Technologies Based on Fluorescence Spectroscopy and Surface Plasmon Resonance

The purpose of this work is to provide an exhaustive overview of the emerging biosensor technologies for the detection of analytes of interest for food, environment, security, and health. Over the years, biosensors have acquired increasing importance in a wide range of applications due to synergistic studies of various scientific disciplines, determining their great commercial potential and revealing how nanotechnology and biotechnology can be strictly connected. In the present scenario, biosensors have increased their detection limit and sensitivity unthinkable until a few years ago. The most widely used biosensors are optical-based devices such as surface plasmon resonance (SPR)-based biosensors and fluorescence-based biosensors. Here, we will review them by highlighting how the progress in their design and development could impact our daily life.

Biosensors for Studies on Adhesion-Mediated Cellular Responses to Their Microenvironment

Cells interact with their microenvironment by constantly sensing mechanical and chemical cues converting them into biochemical signals. These processes allow cells to respond and adapt to changes in their environment, and are crucial for most cellular functions. Understanding the mechanism underlying this complex interplay at the cell-matrix interface is of fundamental value to decipher key biochemical and mechanical factors regulating cell fate. The combination of material science and surface chemistry aided in the creation of controllable environments to study cell mechanosensing and mechanotransduction. Biologically inspired materials tailored with specific bioactive molecules, desired physical properties and tunable topography have emerged as suitable tools to study cell behavior. Among these materials, synthetic cell interfaces with built-in sensing capabilities are highly advantageous to measure biophysical and biochemical interaction between cells and their environment. In this review, we discuss the design of micro and nanostructured biomaterials engineered not only to mimic the structure, properties, and function of the cellular microenvironment, but also to obtain quantitative information on how cells sense and probe specific adhesive cues from the extracellular domain. This type of responsive biointerfaces provides a readout of mechanics, biochemistry, and electrical activity in real time allowing observation of cellular processes with molecular specificity. Specifically designed sensors based on advanced optical and electrochemical readout are discussed. We further provide an insight into the emerging role of multifunctional micro and nanosensors to control and monitor cell functions by means of material design.

Rapid and dynamic detection of antimicrobial treatment response using spectral amplitude modulation in MZO nanostructure-modified quartz crystal microbalance

We report a dynamic and rapid detection of the response of S. epidermidis to various antimicrobial treatments utilizing the real-time spectral amplitude modulations of the magnesium zinc oxide nanostructure-modified quartz crystal microbalance (MZOnano-QCM) biosensor. The sensor consists of a quartz crystal microbalance (QCM) with magnesium zinc oxide (MZO) nanostructures grown directly on the sensing electrode using metalorganic chemical vapor deposition (MOCVD). Combining the high sensitivity detection of bacteria provided by the MZO nanostructures with the QCM's dynamic acoustic spectrum makes a highly-sensitive dynamic biosensor well-suited for monitoring viscoelastic transitions during drug treatment compared to the QCM's conventional frequency shift signals. We demonstrated dynamically monitoring the response of S. epidermidis to various concentrations of the drug ciprofloxacin, and response to three different antimicrobials vancomycin, oxacillin, and ciprofloxacin, using spectral amplitude modulations of the MZOnano-QCM. Our results indicate that the amplitude modulations exhibit high sensitivity to S. epidermidis response to different drug treatments compared to the conventional frequency shift signals of the device, allowing for rapid determination (within 1.5 h) of the efficacy of the antimicrobial drug. The high sensitivity demonstrated by the spectral amplitude modulations is attributed to the direct relationship of these signals to the viscoelastic transitions of the bacterial cells on the device's sensing area while responding to drug treatment. This relationship is established by the Butterworth-Van-Dyke (BVD) model of the MZOnano-QCM. Standard microbiological protocols and assays were performed to determine the optimal drug dosages and the minimum inhibitory concentrations to serve as the benchmark for the sensor data.

Cell-penetrating pepducins targeting the neurotensin receptor type 1 relieve pain

Pepducins are cell-penetrating, membrane-tethered lipopeptides designed to target the intracellular region of a G protein-coupled receptor (GPCR) in order to allosterically modulate the receptor's signaling output. In this proof-of-concept study, we explored the pain-relief potential of a pepducin series derived from the first intracellular loop of neurotensin receptor type 1 (NTS1), a class A GPCR that mediates many of the effects of the neurotensin (NT) tridecapeptide, including hypothermia, hypotension and analgesia. We used BRET-based biosensors to determine the pepducins' ability to engage G protein signaling pathways associated with NTS1 activation. We observed partial Gα_q and Gα₁₃ activation at a 10 μM concentration, indicating that these pepducins may act as allosteric agonists of NTS1. Additionally, we used surface plasmon resonance (SPR) as a label-free assay to monitor pepducin-induced responses in CHO-K1 cells stably expressing hNTS1. This whole-cell integrated assay enabled us to subdivide our pepducin series into three profile response groups. In order to determine the pepducins' antinociceptive potential, we then screened the series in an acute pain model (tail-flick test) by measuring tail withdrawal latencies to a thermal nociceptive stimulus, following intrathecal (i.t.) pepducin administration (275 nmol/kg). We further evaluated promising pepducins in a tonic pain model (formalin test), as well as in neuropathic (Chronic Constriction Injury) and inflammatory (Complete Freund's Adjuvant) chronic pain models. We report one pepducin, PP-001, that consistently reduced rat nociceptive behaviors, even in chronic pain paradigms. Finally, we designed a TAMRA-tagged version of PP-001 and found by confocal microscopy that the pepducin reached the rat dorsal root ganglia post i.t. injection, thus potentially modulating the activity of NTS1 at this location to produce its analgesic effect. Altogether, these results suggest that NTS1-derived pepducins may represent a promising strategy in pain-relief.

Nanomaterials for Biosensing Lipopolysaccharide

Lipopolysaccharides (LPS) are endotoxins, hazardous and toxic inflammatory stimulators released from the outer membrane of Gram-negative bacteria, and are the major cause of septic shock giving rise to millions of fatal illnesses worldwide. There is an urgent need to identify and detect these molecules selectively and rapidly. Pathogen detection has been done by traditional as well as biosensor-based methods. Nanomaterial based biosensors can assist in achieving these goals and have tremendous potential. The biosensing techniques developed are low-cost, easy to operate, and give a fast response. Due to extremely small size, large surface area, and scope for surface modification, nanomaterials have been used to target various biomolecules, including LPS. The sensing mechanism can be quite complex and involves the transformation of chemical interactions into amplified physical signals. Many different sorts of nanomaterials such as metal nanomaterials, magnetic nanomaterials, quantum dots, and others have been used for biosensing of LPS and have shown attractive results. This review considers the recent developments in the application of nanomaterials in sensing of LPS with emphasis given mainly to electrochemical and optical sensing.

Real-Time Label-Free Targeting Assessment and in Vitro Characterization of Curcumin-Loaded Poly-lactic-co-glycolic Acid Nanoparticles for Oral Colon Targeting

The exploitation of curcumin for oral disease treatment is limited by its low solubility, poor bioavailability, and low stability. Surface-functionalized poly-lactic-co-glycolic acid (PLGA) nanoparticles (NPs) have shown promising results to ameliorate selective delivery of drugs to the gastro-intestinal tract. In this study, curcumin-loaded PLGA NPs (C-PLGA NPs) of about 200 nm were surface-coated with chitosan (CS) for gastro-intestinal mucosa adhesion, wheat germ agglutinin (WGA) for colon targeting or GE11 peptide for tumor colon targeting. Spectrometric and zeta potential analyses confirmed the successful functionalization of the C-PLGA NPs. Real-time label-free assessment of the cell membrane-NP interactions and NP cell uptake were performed by quartz crystal microbalance coupled with supported lipid bilayers and by surface plasmon resonance coupled with living cells. The study showed that CS-coated C-PLGA NPs interact with cells by the electrostatic mechanism, while both WGA- and GE11-coated C-PLGA NPs interact and are taken up by cells by specific active mechanisms. In vitro cell uptake studies corroborated the real-time label-free assessment by yielding a curcumin cell uptake of 7.3 ± 0.3, 13.5 ± 1.0, 27.3 ± 4.9, and 26.0 ± 1.3 μg per 10⁴ HT-29 cells for noncoated, CS-, WGA-, and GE11-coated C-PLGA NPs, respectively. Finally, preliminary in vivo studies showed that the WGA-coated C-PLGA NPs efficiently accumulate in the colon after oral administration to healthy Balb/c mice. In summary, the WGA- and GE11-coated C-PLGA NPs displayed high potential for application as active targeted carriers for anticancer drug delivery to the colon.

Wavelength-scanning surface plasmon resonance microscopy: A novel tool for real time sensing of cell-substrate interactions

This paper, for the first time, presents a wavelength-scanning surface plasmon resonance microscope (WS-SPRM) as a label-free biosensor capable of measuring cell-substrate interaction. The approach utilized a liquid crystal tunable filter (LCTF) as a fast and flexible wavelength-scanning device that can implement a wavelength-scanning and SPR imaging cycle within 1 s. The system was verified by monitoring the dynamics of cellular processes including cell detachment and electroporation of individual cells. It was found that the WS-SPRM presented better performance than the intensity-based SPRM (I-SPRM) in the imaging of cell adhesion. The results also indicated that the WS-SPRM exhibited a larger dynamic range in monitoring cell electroporation than that of I-SPRM. In summary, the developed WS-SPRM in this study provides a promising technique for real-time monitoring of cell-substrate interaction.

Nanoplasmonics-enhanced label-free imaging of endothelial cell monolayer integrity

Surface plasmon resonance imaging (SPRI) is a powerful label-free imaging modality for the analysis of morphological dynamics in cell monolayers. However, classical plasmonic imaging systems have relatively poor spatial resolution along one axis due to the plasmon mode attenuation distance (tens of μm, typically), which significantly limits their ability to resolve subcellular structures. We address this limitation by adding an array of nanostructures onto the metal sensing surface (25 nm thick, 200 nm width, 400 nm period grating) to couple localized plasmons with propagating plasmons, thereby reducing attenuation length and commensurately increasing spatial imaging resolution, without significant loss of sensitivity or image contrast. In this work, experimental results obtained with both conventional unstructured and nanostructured gold film SPRI sensor chips show a clear gain in spatial resolution achieved with surface nanostructuring. The work demonstrates the ability of the nanostructured SPRI chips to resolve fine morphological detail (intercellular gaps) in experiments monitoring changes in endothelial cell monolayer integrity following the activation of the cell surface protease-activated receptor 1 (PAR1) by thrombin. In particular, the nanostructured chips reveal the persistence of small intercellular gaps (<5 μm²) well after apparent recovery of cell monolayer integrity as determined by conventional unstructured surface based SPRI. This new high spatial resolution plasmonic imaging technique uses low-cost and reusable patterned substrates and is likely to find applications in cell biology and pharmacology by allowing label-free quantification of minute cell morphological activities associated with receptor dependent intracellular signaling activity.

Simultaneous assessment of cell morphology and adhesion using aluminum nanoslit-based plasmonic biosensing chips

A variety of physiological and pathological processes rely on cell adhesion, which is most often tracked by changes in cellular morphology. We previously reported a novel gold nanoslit-based biosensor that is capable of real-time and label-free monitoring of cell morphological changes and cell viability. However, the preparation of gold biosensors is inefficient, complicated and costly. Recently, nanostructure-based aluminum (Al) sensors have been introduced for biosensing applications. The Al-based sensor has a longer decay length and is capable of analyzing large-sized mass such as cells. Here, we developed two types of double-layer Al nanoslit-based plasmonic biosensors, which were nanofabricated and used to evaluate the correlation between metastatic potency and adhesion of lung cancer and melanoma cell lines. Cell adhesion was determined by Fano resonance signals that were induced by binding of the cells to the nanoslit. The peak and dip of the Fano resonance spectrum respectively reflected long- and short-range cellular changes, allowing us to simultaneously detect and distinguish between focal adhesion and cell spreading. Also, the Al nanoslit-based biosensor chips were used to evaluate the inhibitory effects of drugs on cancer cell spreading. We are the first to report the use of double layer Al nanoslit-based biosensors for detection of cell behavior, and such devices may become powerful tools for anti-metastasis drug screening in the future.

Early detection of bacteria using SPR imaging and event counting: experiments withListeria monocytogenesandListeria innocua

Foodborne pathogens are of significant concern in the agrifood industry and the development of associated rapid detection and identification methods are of major importance. This paper describes the novel use of resolution-optimized prism-based surface plasmon resonance imaging (RO-SPRI) and data processing for the detection of the foodborne pathogens Listeria monocytogenes and Listeria innocua. With an imaging spatial resolution on the order of individual bacteria (2.7 ± 0.5 μm × 7.9 ± 0.6 μm) over a field of view 1.5 mm², the RO-SPRI system enabled accurate counting of individual bacteria on the sensor surface. Using this system, we demonstrate the detection of two species of Listeria at an initial concentration of 2 × 10² CFU mL⁻¹ in less than 7 hours. The surface density of bacteria at the point of positive detection was 15 ± 4 bacteria per mm². Our approach offers great potential for the development of fast specific detection systems based on affinity monitoring.

A dedicated SPR apparatus optimized for individual bacteria observation and a new strategy for early detection of microorganisms in growth.

Trends in SPR Cytometry: Advances in Label-Free Detection of Cell Parameters

SPR cytometry entails the measurement of parameters from intact cells using the surface plasmon resonance (SPR) phenomenon. Specific real-time and label-free binding of living cells to sensor surfaces has been made possible through the availability of SPR imaging (SPRi) instruments and researchers have started to explore its potential in the last decade. Here we will discuss the mechanisms of detection and additionally describe the problems and issues of mammalian cells in SPR biosensing, both from our own experience and with information from the literature. Finally, we build on the knowledge and applications that has already materialized in this field to give a forecast of some exciting applications for SPRi cytometry.

Label-free cell signaling pathway deconvolution of angiotensin type 1 receptor reveals time-resolved G-protein activity and distinct AngII and AngIIIIV responses

Angiotensin II (AngII) type 1 receptor (AT₁R) is a G protein-coupled receptor known for its role in numerous physiological processes and its implication in many vascular diseases. Its functions are mediated through G protein dependent and independent signaling pathways. AT₁R has several endogenous peptidic agonists, all derived from angiotensinogen, as well as several synthetic ligands known to elicit biased signaling responses. Here, surface plasmon resonance (SPR) was used as a cell-based and label-free technique to quantify, in real time, the response of HEK293 cells stably expressing the human AT₁R. The goal was to take advantage of the integrative nature of this assay to identify specific signaling pathways in the features of the response profiles generated by numerous endogenous and synthetic ligands of AT₁R. First, we assessed the contributions of Gq, G12/13, Gi, Gβγ, ERK1/2 and β-arrestins pathways in the cellular responses measured by SPR where Gq, G12/Rho/ROCK together with β-arrestins and ERK1/2 were found to play significant roles. More specifically, we established a major role for G12 in the early events of the AT₁R-dependent response, which was followed by a robust ERK1/2 component associated to the later phase of the signal. Interestingly, endogenous AT₁R ligands (AngII, AngIII and AngIV) exhibited distinct responses signatures with a significant increase of the ERK1/2-like components for both AngIII and AngIV, which points toward possibly distinct physiological roles for the later. We also tested AT₁R biased ligands, all of which affected both the early and later events. Our results support SPR-based integrative cellular assays as a powerful approach to delineate the contribution of specific signaling pathways for a given cell response and reveal response differences associated with ligands with distinct pharmacological properties.

Label-free optical biosensor for real-time monitoring the cytotoxicity of xenobiotics: A proof of principle study on glyphosate

Rapid and inexpensive biosensor technologies allowing real-time analysis of biomolecular and cellular events have become the basis of next-generation cell-based screening techniques. Our work opens up novel opportunities in the application of the high-throughput label-free Epic BenchTop optical biosensor in cell toxicity studies. The Epic technology records integrated cellular responses about changes in cell morphology and dynamic mass redistribution of cellular contents at the 100-150 nm layer above the sensor surface. The aim of the present study was to apply this novel technology to identify the effect of the herbicide Roundup Classic, its co-formulant polyethoxylated tallow amine (POEA), and its active ingredient glyphosate, on MC3T3-E1 cells adhered on the biosensor surface. The half maximal inhibitory concentrations of Roundup Classic, POEA and glyphosate upon 1 h of exposure were found to be 0.024%, 0.021% and 0.163% in serum-containing medium and 0.028%, 0.019% and 0.538% in serum-free conditions, respectively (at concentrations equivalent to the diluted Roundup solution). These results showed a good correlation with parallel end-point assays, demonstrating the outstanding utility of the Epic technique in cytotoxicity screening, allowing not only high-throughput, real-time detection, but also reduced assay run time and cytotoxicity assessment at end-points far before cell death would occur.

Monitoring individual cell-signaling activity using combined metal-clad waveguide and surface-enhanced fluorescence imaging

Validation of a combined metal-clad waveguide and surface enhanced fluorescence imaging platform for live cell imaging.

Novel Real-Time Proximity Assay for Characterizing Multiple Receptor Interactions on Living Cells

Cellular receptor activity is often controlled through complex mechanisms involving interactions with multiple molecules, which can be soluble ligands and/or other cell surface molecules. In this study, we combine a fluorescence-based technology for real-time interaction analysis with fluorescence quenching to create a novel time-resolved proximity assay to study protein-receptor interactions on living cells. This assay extracts the binding kinetics and affinity for two proteins if they bind in proximity on the cell surface. One application of real-time proximity interaction analysis is to study relative levels of receptor dimerization. The method was primarily evaluated using the HER2 binding antibodies Trastuzumab and Pertuzumab and two EGFR binding antibodies including Cetuximab. Using Cetuximab and Trastuzumab, proximity of EGFR and HER2 was investigated before and after treatment of cells with the tyrosine-kinase inhibitor Gefitinib. Treated cells displayed 50% increased proximity signal, whereas the binding characteristics of the two antibodies were not significantly affected, implying an increase in the EGFR-HER2 dimer level. These results demonstrate that real-time proximity interaction analysis enables determination of the interaction rate constants and affinity of two ligands while simultaneously quantifying their relative colocalization on living cells.

Quantitative Detection of Weak D Antigen Variants in Blood Typing using SPR

Modern techniques for quantifying blood group antibody-antigen interactions are very limited, especially for weaker interactions which result from low antigen expression and/or partial expression of the antigen structure. Surface plasmon resonance (SPR) detection is often used to monitor and quantify bio-interactions. Previously, a regenerable, multi-fucntional platform for quantitative RBC phenotyping of normal antigen expression using SPR detection was reported. However, detection of weaker variants were not explored. Here, this sensitivity study used anti-human IgG antibodies immobilized to a gold sensor surface to two clinically important types of weaker D variants using SPR; weak D and partial D. Positive pre-sensitised cells bind to the anti-human IgG monolayer, and the response unit (RU) is reported (>100 RU). Unbound negative cells are directly eluted (<100 RU). Weak D cells were detected between a range of 180–580 RU, due to a lower expression of antigens. Partial D cells, category D VI, were also positively identified (352–1147 RU), similar to that of normal D antigens. The detection of two classes of weaker D variants was achieved for the first time using this fully regenerable SPR platform, opening up a new avenue to replace the current subjective and arbitrary methods for quantifying blood group antibody-antigen interactions.

Real-time Characterization of Antibody Binding to Receptors on Living Immune Cells

Understanding molecular interactions on immune cells is crucial for drug development to treat cancer and autoimmune diseases. When characterizing molecular interactions, the use of a relevant living model system is important, as processes such as receptor oligomerization and clustering can influence binding patterns. We developed a protocol to enable time-resolved analysis of ligand binding to receptors on living suspension cells. Different suspension cell lines and weakly adhering cells were tethered to Petri dishes with the help of a biomolecular anchor molecule, and antibody binding was analyzed using LigandTracer. The protocol and assay described in this report were used to characterize interactions involving eight cell lines. Experiments were successfully conducted in three different laboratories, demonstrating the robustness of the protocol. For various antibodies, affinities and kinetic rate constants were obtained for binding to CD20 on both Daudi and Ramos B-cells, the T-cell co-receptor CD3 on Jurkat cells, and the Fcγ receptor CD32 on transfected HEK293 cells, respectively. Analyzing the binding of Rituximab to B-cells resulted in an affinity of 0.7–0.9 nM, which is similar to values reported previously for living B-cells. However, we observed a heterogeneous behavior for Rituximab interacting with B-cells, which to our knowledge has not been described previously. The understanding of complex interactions will be facilitated with the possibility to characterize binding processes in real-time on living immune cells. This provides the chance to broaden the understanding of how binding kinetics relate to biological function.

Wavelength-Scanning SPR Imaging Sensors Based on an Acousto-Optic Tunable Filter and a White Light Laser

A fast surface plasmon resonance (SPR) imaging biosensor system based on wavelength interrogation using an acousto-optic tunable filter (AOTF) and a white light laser is presented. The system combines the merits of a wide-dynamic detection range and high sensitivity offered by the spectral approach with multiplexed high-throughput data collection and a two-dimensional (2D) biosensor array. The key feature is the use of AOTF to realize wavelength scan from a white laser source and thus to achieve fast tracking of the SPR dip movement caused by target molecules binding to the sensor surface. Experimental results show that the system is capable of completing a SPR dip measurement within 0.35 s. To the best of our knowledge, this is the fastest time ever reported in the literature for imaging spectral interrogation. Based on a spectral window with a width of approximately 100 nm, a dynamic detection range and resolution of 4.63 × 10^-2 refractive index unit (RIU) and 1.27 × 10^-6 RIU achieved in a 2D-array sensor is reported here. The spectral SPR imaging sensor scheme has the capability of performing fast high-throughput detection of biomolecular interactions from 2D sensor arrays. The design has no mechanical moving parts, thus making the scheme completely solid-state.

Fast spectral surface plasmon resonance imaging sensor for real-time high-throughput detection of biomolecular interactions

A fast surface plasmon resonance (SPR) imaging biosensor system based on wavelength interrogation using a liquid crystal tunable filter (LCTF) is presented. The system combines the merits of wide-dynamic detection range offered by the spectral approach and multiplexed high-throughput data collection with a two-dimensional (2-D) biosensor array. The key feature of the reported scheme is a feedback loop that drives the LCTF to achieve fast tracking of the SPR dip movement caused by the binding of target molecules to the sensor surface. Experimental results show that the system is capable of completing an SPR dip measurement within 4 s. Based on using a spectral window of about 100 nm, the experimental dynamic detection range and refractive index resolution are 4.63×10?2??RIU and 5.87×10?6??RIU, respectively. As also demonstrated herein using 2-D microsensor arrays, among the spectral SPR sensors, the reported system is most suitable for multiplexed label-free biosensing applications.

Feasibility Study of the Permeability and Uptake of Mesoporous Silica Nanoparticles across the Blood-Brain Barrier

Drug delivery into the brain is impeded by the blood-brain-barrier (BBB) that filters out the vast majority of drugs after systemic administration. In this work, we assessed the transport, uptake and cytotoxicity of promising drug nanocarriers, mesoporous silica nanoparticles (MSNs), in in vitro models of the BBB. RBE4 rat brain endothelial cells and Madin-Darby canine kidney epithelial cells, strain II, were used as BBB models. We studied spherical and rod-shaped MSNs with the following modifications: bare MSNs and MSNs coated with a poly(ethylene glycol)-poly(ethylene imine) (PEG-PEI) block copolymer. In transport studies, MSNs showed low permeability, whereas the results of the cellular uptake studies suggest robust uptake of PEG-PEI-coated MSNs. None of the MSNs showed significant toxic effects in the cell viability studies. While the shape effect was detectable but small, especially in the real-time surface plasmon resonance measurements, coating with PEG-PEI copolymers clearly facilitated the uptake of MSNs. Finally, we evaluated the in vivo detectability of one of the best candidates, i.e. the copolymer-coated rod-shaped MSNs, by two-photon in vivo imaging in the brain vasculature. The particles were clearly detectable after intravenous injection and caused no damage to the BBB. Thus, when properly designed, the uptake of MSNs could potentially be utilized for the delivery of drugs into the brain via transcellular transport.

SIMPLE SURFACE PLASMON RESONANCE-BASED DOSEMETER

The interest to application of various surface plasmon resonance (SPR)-based sensors for the investigation of chemical and biological processes in thin layers deposited on the grating's surface/media is developing. Characterisation of processes as well as specimen's features might be performed analysing variations in optical properties (refraction index) of these thin layers. SPR sensors by default are characterised by high resolution and small uncertainties, and measurements might be performed in situ High-resolution, low-cost, SPR-based dosemeter concept has been proposed and realised depositing dose-sensitive nPAG gel layer onto diffraction grating's surface. The experimental set-up and method for information read out from the sensor were developed and implemented. Obtained results show a potential application of SPR-based dosemeter for dose measurements/mapping in steep gradient fields and/or large area fields.

Surface plasmon resonance: a label-free tool for cellular analysis

Surface plasmon resonance (SPR) is a popular technique that allows for sensitive, specific, label-free and real-time assessment of biomolecular interactions. SPR is a nondestructive, modular and flexible tool for various applications in biomedical sciences ranging from cell sorting, cell surface characterization and drug discovery. In this review, we will discuss more specifically how SPR is used to monitor the dynamics of various types of cellular binding events and morphological adherence changes in response to external stimuli.

Noble Hybrid Nanostructures as Efficient Anti-Proliferative Platforms for Human Breast Cancer Cell

Nanomaterials have proven to possess great potential in biomaterials research. Recently, they have suggested considerable promise in cancer diagnosis and therapy. Among others, silicon (Si) nanomaterials have been extensively employed for various biomedical applications; however, the utilization of Si for cancer therapy has been limited to nanoparticles, and its potential as anticancer substrates has not been fully explored. Noble nanoparticles have also received considerable attention owing to unique anticancer properties to improve the efficiency of biomaterials for numerous biological applications. Nevertheless, immobilization and control over delivery of the nanoparticles have been challenge. Here, we develop hybrid nanoplatforms to efficiently hamper breast cancer cell adhesion and proliferation. Platforms are synthesized by femtosecond laser processing of Si into multiphase nanostructures, followed by sputter-coating with gold (Au)/gold-palladium (Au-Pd) nanoparticles. The performance of the developed platforms was then examined by exploring the response of normal fibroblast and metastatic breast cancer cells. Our results from the quantitative and qualitative analyses show a dramatic decrease in the number of breast cancer cells on the hybrid platform compared to untreated substrates. Whereas, fibroblast cells form stable adhesion with stretched and elongated cytoskeleton and actin filaments. The hybrid platforms perform as dual-acting cytophobic/cytostatic stages where Si nanostructures depress breast cancer cell adhesion while immobilized Au/Au-Pd nanoparticles are gradually released to affect any surviving cell on the nanostructures. The nanoparticles are believed to be taken up by breast cancer cells via endocytosis, which subsequently alter the cell nucleus and may cause cell death. The findings suggest that the density of nanostructures and concentration of coated nanoparticles play critical roles on cytophobic/cytostatic properties of the platforms on human breast cancer cells while having no or even cytophilic effects on fibroblast cells. Because of the remarkable contrary responses of normal and cancer cells to the proposed platform, we envision that it will provide novel applications in cancer research.

Surface plasmon resonance biosensor as a tool for the measurement of complex refractive indices

Optical characterisation of liquids through the measurement of their complex refractive index is critical in environmental monitoring, food industry and medicine. While surface plasmon resonance is widely used for measurement of the real part of the refractive index there have been few studies to date on measurement of complex refractive index with this method. We present a systematic study which highlights the challenges associated with this approach. Instrument design and data analysis techniques are presented together with preliminary experimental results.

Investigation of an SPR biosensor for determining the influence of connexin 43 expression on the cytotoxicity of cisplatin

The real-time and label free detection abilities of surface plasmon resonance (SPR) biosensors provide a way of evaluating the influence of some genes’ expression on anti-tumor drug cytotoxicity.

iRAGE as a novel carboxymethylated peptide that prevents advanced glycation end product-induced apoptosis and endoplasmic reticulum stress in vascular smooth muscle cells

Advanced glycation end-products (AGE) and the receptor for AGE (RAGE) have been linked to numerous diabetic vascular complications. RAGE activation promotes a self-sustaining state of chronic inflammation and has been shown to induce apoptosis in various cell types. Although previous studies in vascular smooth muscle cells (VSMC) showed that RAGE activation increases vascular calcification and interferes with their contractile phenotype, little is known on the potential of RAGE to induce apoptosis in VSMC. Using a combination of apoptotic assays, we showed that RAGE stimulation with its ligand CML-HSA promotes apoptosis of VSMC. The formation of stress granules and the increase in the level of the associated protein HuR point toward RAGE-dependent endoplasmic reticulum (ER) stress, which is proposed as a key contributor of RAGE-induced apoptosis in VSMC as it has been shown to promote cell death via numerous mechanisms, including up-regulation of caspase-9. Chronic NF-κB activation and modulation of Bcl-2 homologs are also suspected to contribute to RAGE-dependent apoptosis in VSMC. With the goal of reducing RAGE signaling and its detrimental impact on VSMC, we designed a RAGE antagonist (iRAGE) derived from the primary amino acid sequence of HSA. The resulting CML peptide was selected for the high glycation frequency of the primary sequence in the native protein in vivo. Pretreatment with iRAGE blocked 69.6% of the increase in NF-κB signaling caused by RAGE activation with CML-HSA after 48h. Preincubation with iRAGE was successful in reducing RAGE-induced apoptosis, as seen through enhanced cell survival by SPR and reduced PARP cleavage. Activation of executioner caspases was 63.5% lower in cells treated with iRAGE before stimulation with CML-HSA. To our knowledge, iRAGE is the first antagonist shown to block AGE-RAGE interaction and we propose the molecule as an initial candidate for drug discovery.

Kinetics of small molecule interactions with membrane proteins in single cells measured with mechanical amplification

Measuring small molecule interactions with membrane proteins in single cells is critical for understanding many cellular processes and for screening drugs. However, developing such a capability has been a difficult challenge. We show that molecular interactions with membrane proteins induce a mechanical deformation in the cellular membrane, and real-time monitoring of the deformation with subnanometer resolution allows quantitative analysis of small molecule-membrane protein interaction kinetics in single cells. This new strategy provides mechanical amplification of small binding signals, making it possible to detect small molecule interactions with membrane proteins. This capability, together with spatial resolution, also allows the study of the heterogeneous nature of cells by analyzing the interaction kinetics variability between different cells and between different regions of a single cell.

Considerations on Circuit Design and Data Acquisition of a Portable Surface Plasmon Resonance Biosensing System

The aim of this study was to develop a circuit for an inexpensive portable biosensing system based on surface plasmon resonance spectroscopy. This portable biosensing system designed for field use is characterized by a special structure which consists of a microfluidic cell incorporating a right angle prism functionalized with a biomolecular identification membrane, a laser line generator and a data acquisition circuit board. The data structure, data memory capacity and a line charge-coupled device (CCD) array with a driving circuit for collecting the photoelectric signals are intensively focused on and the high performance analog-to-digital (A/D) converter is comprehensively evaluated. The interface circuit and the photoelectric signal amplifier circuit are first studied to obtain the weak signals from the line CCD array in this experiment. Quantitative measurements for validating the sensitivity of the biosensing system were implemented using ethanol solutions of various concentrations indicated by volume fractions of 5%, 8%, 15%, 20%, 25%, and 30%, respectively, without a biomembrane immobilized on the surface of the SPR sensor. The experiments demonstrated that it is possible to detect a change in the refractive index of an ethanol solution with a sensitivity of 4.99838 × 10⁵ ΔRU/RI in terms of the changes in delta response unit with refractive index using this SPR biosensing system, whereby the theoretical limit of detection of 3.3537 × 10⁻⁵ refractive index unit (RIU) and a high linearity at the correlation coefficient of 0.98065. The results obtained from a series of tests confirmed the practicality of this cost-effective portable SPR biosensing system.

Tuning cell adhesion by direct nanostructuring silicon into cell repulsive/adhesive patterns

Developing platforms that allow tuning cell functionality through incorporating physical, chemical, or mechanical cues onto the material surfaces is one of the key challenges in research in the field of biomaterials. In this respect, various approaches have been proposed and numerous structures have been developed on a variety of materials. Most of these approaches, however, demand a multistep process or post-chemical treatment. Therefore, a simple approach would be desirable to develop bio-functionalized platforms for effectively modulating cell adhesion and consequently programming cell functionality without requiring any chemical or biological surface treatment. This study introduces a versatile yet simple laser approach to structure silicon (Si) chips into cytophobic/cytophilic patterns in order to modulate cell adhesion and proliferation. These patterns are fabricated on platforms through direct laser processing of Si substrates, which renders a desired computer-generated configuration into patterns. We investigate the morphology, chemistry, and wettability of the platform surfaces. Subsequently, we study the functionality of the fabricated platforms on modulating cervical cancer cells (HeLa) behaviour. The results from in vitro studies suggest that the nanostructures efficiently repel HeLa cells and drive them to migrate onto untreated sites. The study of the morphology of the cells reveals that cells evade the cytophobic area by bending and changing direction. Additionally, cell patterning, cell directionality, cell channelling, and cell trapping are achieved by developing different platforms with specific patterns. The flexibility and controllability of this approach to effectively structure Si substrates to cell-repulsive and cell-adhesive patterns offer perceptible outlook for developing bio-functionalized platforms for a variety of biomedical devices. Moreover, this approach could pave the way for developing anti-cancer platforms that selectively repel cancer cells while favoring the adhesion of normal cells.

Cellular micromotion monitored by long-range surface plasmon resonance with optical fluctuation analysis

Long-range surface plasmon resonance (LRSPR) is a powerful biosensing technology due to a substantially larger probing depth into the medium and sensitivity, compared with conventional SPR. We demonstrate here that LRSPR can provide sensitive noninvasive measurement of the dynamic fluctuation of adherent cells, often referred to as the cellular micromotion. Proof of concept was achieved using confluent layers of 3T3 fibroblast cells and MDA-MB-231 cancer cells. The slope of the power spectral density (PSD) of the optical fluctuations was calculated to determine the micromotion index, and significant differences were measured between live and fixed cell layers. Furthermore, the performances of LRSPR and conventional surface plasmon resonance (cSPR) were compared with respect to micromotion monitoring. Our study showed that the micromotion index of cells measured by LRSPR sensors was higher than when measured with cSPR, suggesting a higher sensitivity of LRSPR to the micromotion of cells. To investigate further this finding, simulations were conducted to establish the relative sensitivities of LRSPR and cSPR to membrane fluctuations. Increased signal intensity was predicted for LRSPR in comparison to cSPR, suggesting that membrane fluctuations play a significant role in the optical micromotion measured in LRSPR. Analogous to cellular micromotion measured using impedance techniques, LRSPR micromotion has the potential to provide important biological information on the metabolic activity and viability of adherent cells.

Design and analysis of a spectro-angular surface plasmon resonance biosensor operating in the visible spectrum

Surface plasmon resonance (SPR) sensing is one of the most widely used methods to implement biosensing due to its sensitivity and capacity for label-free detection. Whilst most commercial SPR sensors operate in the angular regime, it has recently been shown that an increase in sensitivity and a greater robustness against noise can be achieved by measuring the reflectivity when varying both the angle and wavelength simultaneously, in a so-called spectro-angular SPR biosensor. A single value decomposition method is used to project the two-dimensional spectro-angular reflection signal onto a basis set and allow the image obtained from an unknown refractive index sample to be compared very accurately with a pre-calculated reference set. Herein we demonstrate that a previously reported system operated in the near infra-red has a lower detection limit when operating in the visible spectrum due to the improved spatial resolution and numerical precision of the image sensor. The SPR biosensor presented here has an experimental detection limit of 9.8 × 10(-7) refractive index unit. To validate the system as a biosensor, we also performed the detection of synthetic RNA from pathogenic Legionella pneumophila with the developed biosensing platform.

Surface plasmon resonance fiber sensor for real-time and label-free monitoring of cellular behavior

This paper reports on the application of an optical fiber biosensor for real-time analysis of cellular behavior. Our findings illustrate that a fiber sensor fabricated from a traditional telecommunication fiber can be integrated into conventional cell culture equipment and used for real-time and label-free monitoring of cellular responses to chemical stimuli. The sensing mechanism used for the measurement of cellular responses is based on the excitation of surface plasmon resonance (SPR) on the surface of the optical fiber. In this proof of concept study, the sensor was utilized to investigate the influence of a number of different stimuli on cells-we tested the effects of trypsin, serum and sodium azide. These stimuli induced detachment of cells from the sensor surface, uptake of serum and inhibition of cellular metabolism, accordingly. The effects of different stimuli were confirmed with alamar blue assay, phase contrast and fluorescence microscopy. The results indicated that the fiber biosensor can be successfully utilized for real-time and label-free monitoring of cellular response in the first 30 min following the introduction of a stimulus. Furthermore, we demonstrated that the optical fiber biosensors can be easily regenerated for repeated use, proving this platform as a versatile and cost-effective sensing tool.

Label-free monitoring of μ-opioid receptor-mediated signaling

In this study, we used a combination of traditional signaling investigation approaches, bioluminescence resonance energy transfer (BRET) biosensors, and the label-free approach surface plasmon resonance (SPR) spectroscopy to monitor the signaling cascades of the μ-opioid receptor (MOP). In human embryonic kidney cells stably expressing a Flag-tagged version of human MOP, we compared the signals triggered by the noninternalizing and internalizing MOP agonists morphine and DAMGO (Tyr-D-Ala-Gly-N-methyl-Phe-Gly-ol), respectively. We studied three major and well described components of MOP signaling: receptor internalization, G protein coupling, and activation of extracellular signal-regulated kinase ERK1/ERK2. Our results show that morphine and DAMGO display different profiles of receptor internalization and a similar ability to trigger the phosphorylation of ERK1/ERK2. Our SPR analyses revealed that morphine and DAMGO evoke similar SPR signatures and that Gαi, cAMP-dependent pathways, and ERK1/ERK2 have key roles in morphine- and DAMGO-mediated signaling. Most interestingly, we found that the so-called MOP neutral antagonists CTOP (D-Phe-Cys-Tyr-D-Trp-Orn-Thr-Pen-Thr-NH(2)), naloxone, and naltrexone behave like partial agonists. Even more intriguing, BRET experiments indicate that CTAP (D-Phe-Cys-Tyr-D-Trp-Arg-Thr-Pen-Thr-NH(2)) induces similar conformational changes as naltrexone at the Gαi-βγ interface, whereas it appears as an inverse agonist based on its SPR response thus indicating distinct signaling mechanisms for the two ligands. Taken together, our results support the usefulness of label-free methods such as SPR to study whole-cell responses and signaling cascades triggered by G protein-coupled receptors and complement the conventional approaches by revealing cellular responses that would have been otherwise undetectable.