1
|
Karwadiya J, Lützenkirchen J, Darbha GK. Retention of ZnO nanoparticles onto polypropylene and polystyrene microplastics: Aging-associated interactions and the role of aqueous chemistry. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 352:124097. [PMID: 38703985 DOI: 10.1016/j.envpol.2024.124097] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2023] [Revised: 04/29/2024] [Accepted: 04/30/2024] [Indexed: 05/06/2024]
Abstract
Microplastics (MPs) are pervasive and undergo environmental aging processes, which alters potential interaction with the co-contaminants. Hence, to assess their contaminant-carrying capacity, mimicking the weathering characteristics of secondary MPs is crucial. To this end, the present study investigated the interaction of Zinc oxide (nZnO) nanoparticles with non-irradiated (NI) and UV-irradiated (UI) forms of the most abundant MPs, such as polypropylene (PP) and polystyrene (PS), in aqueous environments. SEM images revealed mechanical abrasions on the surfaces of NI-MPs and their subsequent photoaging caused the formation of close-ended and open-ended cracks in UI-PP and UI-PS, respectively. Batch-sorption experiments elucidated nZnO uptake kinetics by PP and PS MPs, suggesting a sorption-desorption pathway due to weaker and stronger sorption sites until equilibrium was achieved. UI-PP showed higher nZnO (∼3000 mg/kg) uptake compared to NI-PP, while UI-PS showed similar or slightly decreased nZnO (∼2000 mg/kg) uptake compared to NI-PS. FTIR spectra and zeta potential measurements revealed electrostatic interaction as the dominant interaction mechanism. Higher nZnO uptake by MPs was noted between pH 6.5 and 8.5, whereas it decreased beyond this range. Despite DOM, MPs always retained ∼874 mg/kg nZnO irrespective of MPs type and extent of aging. The experimental results in river water showed higher nZnO uptake on MPs compared to DI water, attributed to mutual effect of ionic competition, DOM, and MP hydrophobicity. In the case of humic acids, complex synthetic and natural water matrices, NI-MPs retained more nZnO than UI-MPs, suggesting that photoaged MPs sorb less nZnO under environmental conditions than non-photoaged MPs. These findings enhance our understanding on interaction of the MPs with co-contaminants in natural environments.
Collapse
Affiliation(s)
- Jayant Karwadiya
- Environmental nanoscience laboratory, Department of Earth Sciences, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal, 741246, India
| | - Johannes Lützenkirchen
- Institute of Nuclear Waste Disposal (INE), Karlsruhe Institute of Technology (KIT), 76344, Eggenstein-Leopoldshafen, Germany
| | - Gopala Krishna Darbha
- Environmental nanoscience laboratory, Department of Earth Sciences, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal, 741246, India; Centre for Climate and Environmental Studies, Indian Institute of Science Education and Research Kolkata, Mohanpur, West Bengal, 741246, India.
| |
Collapse
|
2
|
Rizvi NB, Sarwar A, Waheed S, Iqbal ZF, Imran M, Javaid A, Kim TH, Khan MS. Nano-based remediation strategies for micro and nanoplastic pollution. JOURNAL OF CONTAMINANT HYDROLOGY 2024; 265:104380. [PMID: 38875891 DOI: 10.1016/j.jconhyd.2024.104380] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/16/2024] [Revised: 05/02/2024] [Accepted: 06/02/2024] [Indexed: 06/16/2024]
Abstract
Due to rapid urbanization, there have been continuous environmental threats from different pollutants, especially from microplastics. Plastic products rapidly proliferate significantly contributing to the occurrence of micro-plastics, which poses a significant environmental risk. These microplastics originated from diverse sources and are characterized by their persistent and widespread occurrence; human health and the entire ecosystem are adversely affected by them. The removal of microplastics not only requires innovative technologies but also efficient materials capable of effectively eliminating them from our environment. The progress made so far has highlighted the advantages of utilizing the dimensional and structural properties of nanomaterials to increase the effectiveness of existing methods for micro-plastic treatment, aiming for a more sustainable approach to their removal. In the current review, we demonstrate a thorough overview of the sources, occurrences, and potential harmful effects of microplastics, followed by a further discussion of promising technologies used for their removal. An in-depth examination of both advantages and a few limitations of all these given technologies, including physical, chemical, and biological approaches, has been discussed. Additionally, the review explores the use of nanomaterials as an effective means to overcome obstacles and improve the efficiency of microplastic elimination methods. n conclusion, this review addresses, current challenges in this field and outlines the future perspectives for further research in this domain.
Collapse
Affiliation(s)
- Nayab Batool Rizvi
- Centre for Clinical and Nutritional Chemistry, University of the Punjab, Lahore 54000, Pakistan
| | - Adnan Sarwar
- Centre for Clinical and Nutritional Chemistry, University of the Punjab, Lahore 54000, Pakistan
| | - Saba Waheed
- Centre for Clinical and Nutritional Chemistry, University of the Punjab, Lahore 54000, Pakistan
| | - Zeenat Fatima Iqbal
- Department of Chemistry, University of Engineering and Technology, Lahore-54000, Pakistan
| | - Muhammad Imran
- Centre for Inorganic Chemistry, School of Chemistry, University of the Punjab, Lahore 54000, Pakistan.
| | - Ayesha Javaid
- Centre for Inorganic Chemistry, School of Chemistry, University of the Punjab, Lahore 54000, Pakistan
| | - Tak H Kim
- School of Environment and Science, Griffith University, 170 Kessels Road, Nathan, QLD, 4111, Australia
| | - Muhammad Shahzeb Khan
- Sulaiman Bin Abdullah Aba Al-Khail Centre for Interdisciplinary Research in Basic Sciences (SA-CIRBS), Faculty of Basic and Applied Sciences, International Islamic University Islamabad, Islamabad, Pakistan.
| |
Collapse
|
3
|
El Hanafi N, Zaabar A, Aoudjit F, Lounici H. Decolorization enhancement of basic fuchsin by UV/H 2O 2 process: optimization and modeling using Box Behnken design. JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH. PART A, TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING 2024; 59:251-259. [PMID: 38903027 DOI: 10.1080/10934529.2024.2369432] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/25/2022] [Accepted: 06/13/2024] [Indexed: 06/22/2024]
Abstract
The present work deals with the optimization of basic fuchsin dye removal from an aqueous solution using the ultraviolet UV/H2O2 process. Response Surface Modeling (RSM) based on Box-Behnken experimental design (BBD) was applied as a tool for the optimization of operating conditions such as initial dye concentration (10-50 ppm), hydrogen peroxide dosage (H2O2) (10-20 mM/L) and irradiation time (60-180 min), at pH = 7.4 under ultra-violet irradiation (254 nm and 25 W intensity). Chemical oxygen demand (COD abatement) was used as a response variable. The Box-Behnken Design can be employed to develop a mathematical model for predicting UV/H2O2 performance for COD abatement. COD abatement is sensitive to the concentration of hydrogen peroxide and irradiation time. Statistical analyses indicate a high correlation between observed and predicted values (R2 > 0.98). In the BBD predictions, the optimal conditions in the UV/H2O2 process for removing 99.3% of COD were found to be low levels of pollutant concentration (10 ppm), a high concentration of hydrogen peroxide dosage (20 mM/L), and an irradiation time of 80 min.
Collapse
Affiliation(s)
- Nawel El Hanafi
- Laboratoire des Matériaux et Développement Durable (MDD), Faculté des Sciences et des Sciences Appliquées, Université de Bouira, Bouira, Algeria
| | - Aida Zaabar
- Laboratoire des Matériaux et Développement Durable (MDD), Faculté des Sciences et des Sciences Appliquées, Université de Bouira, Bouira, Algeria
- Laboratoire d'Electrochimie, Corrosion et de Valorisation Energétique (LECVE), Faculté de Technologie, Université de Bejaia, Bejaia, Algeria
| | - Farid Aoudjit
- Laboratoire des Matériaux et Développement Durable (MDD), Faculté des Sciences et des Sciences Appliquées, Université de Bouira, Bouira, Algeria
| | - Hakim Lounici
- Laboratoire des Matériaux et Développement Durable (MDD), Faculté des Sciences et des Sciences Appliquées, Université de Bouira, Bouira, Algeria
| |
Collapse
|
4
|
García-López EI, Aoun N, Marcì G. An Overview of the Sustainable Depolymerization/Degradation of Polypropylene Microplastics by Advanced Oxidation Technologies. Molecules 2024; 29:2816. [PMID: 38930879 PMCID: PMC11207091 DOI: 10.3390/molecules29122816] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2024] [Revised: 06/03/2024] [Accepted: 06/08/2024] [Indexed: 06/28/2024] Open
Abstract
Plastics have become indispensable in modern society; however, the proliferation of their waste has become a problem that can no longer be ignored as most plastics are not biodegradable. Depolymerization/degradation through sustainable processes in the context of the circular economy are urgent issues. The presence of multiple types of plastic materials makes it necessary to study the specific characteristics of each material. This mini-review aims to provide an overview of technological approaches and their performance for the depolymerization and/or degradation of one of the most widespread plastic materials, polypropylene (PP). The state of the art is presented, describing the most relevant technologies focusing on advanced oxidation technologies (AOT) and the results obtained so far for some of the approaches, such as ozonation, sonochemistry, or photocatalysis, with the final aim of making more sustainable the PP depolymerization/degradation process.
Collapse
Affiliation(s)
- Elisa I. García-López
- Department of Biological, Chemical and Pharmaceutical Sciences and Technologies (STEBICEF), University of Palermo, Viale delle Scienze, 90128 Palermo, Italy;
| | - Narimene Aoun
- Department of Engineering (DI), University of Palermo, Viale delle Scienze, 90128 Palermo, Italy;
| | - Giuseppe Marcì
- Department of Engineering (DI), University of Palermo, Viale delle Scienze, 90128 Palermo, Italy;
| |
Collapse
|
5
|
Zeng G, Dai M, Liu P, Chen T, Hu L, Luo H, Zhou Q, Du M, Pan X. Phthalocyanine blue leaching and exposure effects on Microcystis aeruginosa (cyanobacteria) of photoaged microplastics. JOURNAL OF HAZARDOUS MATERIALS 2024; 469:133984. [PMID: 38460263 DOI: 10.1016/j.jhazmat.2024.133984] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/05/2023] [Revised: 03/04/2024] [Accepted: 03/06/2024] [Indexed: 03/11/2024]
Abstract
Light-stabilizing additives may contribute to the overall pollution load of microplastics (MPs) and potentially enter the food chain, severely threatening aquatic life and human health. This study investigated the variation between polystyrene (PS) MPs and phthalocyanine blue (CuPC)-containing MPs before and after photoaging, as well as their effects on Microcystis aeruginosa. The presence of PS-MPs increased cell mortality, antioxidant enzyme activity, and the variation in extracellular components, while the presence of CuPC exacerbated these variations. CuPC-containing MPs caused different increasing trends in superoxide dismutase and malondialdehyde activities due to electron transfer across the membrane. Transcriptomic analysis revealed that the MPs and CuPC affected various cellular processes, with the greatest impact being on cell membranes. Compared with MPs, CuPC negatively affected ribosome and polysaccharide formation. These findings provide insights into the molecular mechanisms underlying the cellular response to MPs and their associated light-stabilizer pollution and imply the necessity for mitigating the pollution of both MPs and light-stabilizers.
Collapse
Affiliation(s)
- Ganning Zeng
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China; Key Laboratory of Ocean Space Resource Management Technology, MNR, Hangzhou 310012, China
| | - Mengzheng Dai
- College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Peirui Liu
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Tiansheng Chen
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Lingling Hu
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Hongwei Luo
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Qian Zhou
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Mingming Du
- College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Xiangliang Pan
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China.
| |
Collapse
|
6
|
Saygin H, Tilkili B, Kayisoglu P, Baysal A. Oxidative stress, biofilm-formation and activity responses of P. aeruginosa to microplastic-treated sediments: Effect of temperature and sediment type. ENVIRONMENTAL RESEARCH 2024; 248:118349. [PMID: 38309565 DOI: 10.1016/j.envres.2024.118349] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2023] [Revised: 01/16/2024] [Accepted: 01/28/2024] [Indexed: 02/05/2024]
Abstract
Climate change and plastic pollution are the big environmental problems that the environment and humanity have faced in the past and will face in many decades to come. Sediments are affected by many pollutants and conditions, and the behaviors of microorganisms in environment may be influenced due to changes in sediments. Therefore, the current study aimed to explore the differential effects of various microplastics and temperature on different sediments through the metabolic and oxidative responses of gram-negative Pseudomonas aeruginosa. The sediments collected from various fields including beaches, deep-sea discharge, and marine industrial areas. Each sediment was extracted and then treated with various microplastics under different temperature (-18, +4, +20 and 35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed sediment samples were incubated with Pseudomonas aeruginosa to test bacterial activity, biofilm, and oxidative characteristics. The results showed that both the activity and the biofilm formation of Pseudomonas aeruginosa increased with the temperature of microplastic treatment in the experimental setups at the rates between an average of 2-39 % and 5-27 %, respectively. The highest levels of bacterial activity and biofilm formation were mainly observed in the beach area (average rate +25 %) and marine industrial (average rate +19 %) sediments with microplastic contamination, respectively. Moreover, oxidative characteristics significantly linked the bacterial activities and biofilm formation. The oxidative indicators of Pseudomonas aeruginosa showed that catalase and glutathione reductase were more influenced by microplastic contamination of various sediments than superoxide dismutase activities. For instance, catalase and glutathione reductase activities were changed between -37 and +169 % and +137 to +144 %, respectively; however, the superoxide dismutase increased at a rate between +1 and + 21 %. This study confirmed that global warming as a consequence of climate change might influence the effect of microplastic on sediments regarding bacterial biochemical responses and oxidation characteristics.
Collapse
Affiliation(s)
- Hasan Saygin
- Application and Research Center for Advanced Studies, Istanbul Aydin University, Sefakoy Kucukcekmece, 34295, Istanbul, Turkey
| | - Batuhan Tilkili
- Health Services Vocational School of Higher Education, Istanbul Aydin University, Sefakoy Kucukcekmece, 34295, Istanbul, Turkey
| | - Pinar Kayisoglu
- Deptment of Environmental Engineering, Faculty of Civil Engineering, Istanbul Technical University, Maslak, Sariyer, Istanbul, Turkey
| | - Asli Baysal
- Deptment of Chemistry, Faculty of Science and Letters, Istanbul Technical University, Maslak, Sariyer, Istanbul, Turkey.
| |
Collapse
|
7
|
Chinnam B, Dasagiri CS, Araga R. Synthesis and preliminary evaluation of Ag-TiO 2/CNT hybrid nanocomposite for the degradation of polystyrene microplastics under solar irradiation. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:32863-32874. [PMID: 38668952 DOI: 10.1007/s11356-024-33438-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Accepted: 04/19/2024] [Indexed: 05/29/2024]
Abstract
Currently, microplastics (MPs) are considered as emerging aqueous pollutants. However, existing methods for the separation and treatment of MPs from an aquatic environment are limited by their low efficiency. Advanced oxidation processes (AOPs) are novel techniques that employ photo-induced electron/hole pairs to generate active radicals for MP mineralization. Thus, in this study, a photocatalyst, i.e., Ag+ ion-doped TiO2, heterojunctioned with carbon nanotubes (CNT), was synthesized to study the degradation of typical MPs such as polystyrene (PS) under solar irradiation. Effectiveness of the prepared photocatalyst for the PS degradation was estimated through FESEM, FTIR, total organic carbon (TOC) analyzer, and gas chromatography-mass spectroscopy (GC-MS). Quantitatively, 31.7% degradation of PS microbeads was achieved within 48 h. Therefore, this study provides an efficient and cost-effective strategy for the degradation of MPs from the aqueous medium.
Collapse
Affiliation(s)
- Bhagyalakshmi Chinnam
- Department of Chemical Engineering, National Institute of Technology Warangal, Warangal, Telangana, India, 506004
| | - Chandra Shekhar Dasagiri
- Department of Chemical Engineering, National Institute of Technology Warangal, Warangal, Telangana, India, 506004
| | - Ramya Araga
- Department of Chemical Engineering, National Institute of Technology Warangal, Warangal, Telangana, India, 506004.
| |
Collapse
|
8
|
Surana M, Pattanayak DS, Yadav V, Singh VK, Pal D. An insight decipher on photocatalytic degradation of microplastics: Mechanism, limitations, and future outlook. ENVIRONMENTAL RESEARCH 2024; 247:118268. [PMID: 38244970 DOI: 10.1016/j.envres.2024.118268] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/27/2023] [Revised: 01/15/2024] [Accepted: 01/18/2024] [Indexed: 01/22/2024]
Abstract
Plastic material manufacturing and buildup over the past 50 years has significantly increased pollution levels. Microplastics (MPs) and non-biodegradable residual plastic films have become the two most pressing environmental issues among the numerous types of plastic pollution. These tiny plastic flakes enter water systems from a variety of sources, contaminating the water. Since MPs can be consumed by people and aquatic species and eventually make their way into the food chain, their presence in the environment poses a serious concern. Traditional technologies can remove MPs to some extent, but their functional groups, stable covalent bonds, and hydrophobic nature make them difficult to eliminate completely. The urgent need to develop a sustainable solution to the worldwide contamination caused by MPs has led to the exploration of various techniques. Advanced oxidation processes (AOPs) such as photo-catalytic oxidation, photo-degradation, and electrochemical oxidation have been investigated. Among these, photocatalysis stands out as the most promising method for degrading MPs. Photocatalysis is an environmentally friendly process that utilizes light energy to facilitate a chemical reaction, breaking down MPs into carbon dioxide and water-soluble hydrocarbons under aqueous conditions. In photocatalysis, semiconductors act as photocatalysts by absorbing energy from a light source, becoming excited, and generating reactive oxygen species (ROS). These ROS, including hydroxyl radicals (•OH) and superoxide ions ( [Formula: see text] ), play a crucial role in the degradation of MPs. This extensive review provides a detailed exploration of the mechanisms and processes underlying the photocatalytic removal of MPs, emphasizing its potential as an efficient and environmentally friendly approach to address the issue of plastic pollution.
Collapse
Affiliation(s)
- Madhu Surana
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - Dhruti Sundar Pattanayak
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - Venkteshwar Yadav
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - V K Singh
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India
| | - Dharm Pal
- Department of Chemical Engineering, National Institute of Technology Raipur, Raipur, 492010, Chhattisgarh, India.
| |
Collapse
|
9
|
Bhatia SK, Kumar G, Yang YH. Understanding microplastic pollution: Tracing the footprints and eco-friendly solutions. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 914:169926. [PMID: 38199349 DOI: 10.1016/j.scitotenv.2024.169926] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/25/2023] [Revised: 01/03/2024] [Accepted: 01/03/2024] [Indexed: 01/12/2024]
Abstract
Microplastics (MPs) pollution has emerged as a critical environmental issue with far-reaching consequences for ecosystems and human health. These are plastic particles measuring <5 mm and are categorized as primary and secondary based on their origin. Primary MPs are used in various products like cosmetics, scrubs, body wash, and toothpaste, while secondary MPs are generated through the degradation of plastic products. These have been detected in seas, rivers, snow, indoor air, and seafood, posing potential risks to human health through the food chain. Detecting and quantifying MPs are essential to understand their distribution and abundance in the environment. Various microscopic (fluorescence microscopy, scanning electron microscopy) and spectroscopy techniques (FTIR, Raman spectroscopy, X-ray photoelectron spectroscopy) have been reported to analyse MPs. Despite the challenges in scalable removal methods, biological systems have emerged as promising options for eco-friendly MPs remediation. Algae, bacteria, and fungi have shown the potential to adsorb and degrade MPs in wastewater treatment plants (WWTPs) offering hope for mitigating this global crisis. This review examines the sources, impacts, detection, and biological removal of MPs, highlighting future directions in this crucial field of environmental conservation. By fostering global collaboration and innovative research a path towards a cleaner and healthier planet for future generations can be promised.
Collapse
Affiliation(s)
- Shashi Kant Bhatia
- Department of Biological Engineering, College of Engineering, Konkuk University, Seoul 05029, Republic of Korea; Institute for Ubiquitous Information Technology and Applications, Seoul 05029, Republic of Korea.
| | - Gopalakrishnan Kumar
- School of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea; Institute of Chemistry, Bioscience and Environmental Engineering, Faculty of Science and Technology, University of Stavanger, Box 8600 Forus, 4036 Stavanger, Norway
| | - Yung-Hun Yang
- Department of Biological Engineering, College of Engineering, Konkuk University, Seoul 05029, Republic of Korea; Institute for Ubiquitous Information Technology and Applications, Seoul 05029, Republic of Korea.
| |
Collapse
|
10
|
Zhou L, Masset T, Breider F. Adsorption of copper by naturally and artificially aged polystyrene microplastics and subsequent release in simulated gastrointestinal fluid. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2024; 26:411-420. [PMID: 38250811 DOI: 10.1039/d3em00354j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/23/2024]
Abstract
Microplastics, especially aged microplastics can become vectors of metals from environment to organisms with potential negative effects on food chain. However, a few studies focused on the bioavailability of adsorbed metals and most studies related to aged microplastics used artificial method that cannot entirely reflect actual aging processes. In this study, virgin polystyrene was aged by ozone (PS-O3), solar simulator (PS-SS) and lake (PS-lake) to investigate adsorption of Cu by virgin, artificially and naturally aged microplastics and subsequent release in simulated gastrointestinal fluids (SGF). Characterization results show carbonyl was formed in PS-O3 and PS-SS, and the oxidation degree was PS-O3 > PS-SS > PS-lake. However, Cu adsorption capacity followed this order PS-lake (158 μg g-1) > PS-SS (117 μg g-1) > PS-O3 (65 μg g-1) > PS-virgin (0). PS-O3 showed highest Cu adsorption capacity at 0.5 h (71 μg g-1), but it dropped dramatically later (10 μg g-1, 120 h), because PS-O3 could break up and the adsorbed Cu released in solutions subsequently. For PS-lake, precipitation of metallic oxides contributes to the accumulation of Cu. The addition of dissolved organic matter (DOM) could occupy adsorption sites on PS and compete with Cu, but also can attach PS and adsorb Cu due to its rich functional groups. The simultaneous ingestion of microplastics with food suggested that adsorbed Cu is solubilized mostly from aged PS to SGF.
Collapse
Affiliation(s)
- Lu Zhou
- Ecole Polytechnique Fédérale de Lausanne - EPFL, Central Environmental Laboratory, IIE, ENAC, Station 2, CH-1015, Lausanne, Switzerland.
- State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, People's Republic of China
| | - Thibault Masset
- Ecole Polytechnique Fédérale de Lausanne - EPFL, Central Environmental Laboratory, IIE, ENAC, Station 2, CH-1015, Lausanne, Switzerland.
| | - Florian Breider
- Ecole Polytechnique Fédérale de Lausanne - EPFL, Central Environmental Laboratory, IIE, ENAC, Station 2, CH-1015, Lausanne, Switzerland.
| |
Collapse
|
11
|
Haleem N, Kumar P, Zhang C, Jamal Y, Hua G, Yao B, Yang X. Microplastics and associated chemicals in drinking water: A review of their occurrence and human health implications. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 912:169594. [PMID: 38154642 DOI: 10.1016/j.scitotenv.2023.169594] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/06/2023] [Revised: 12/18/2023] [Accepted: 12/20/2023] [Indexed: 12/30/2023]
Abstract
Microplastics (MPs) have entered drinking water (DW) via various pathways, raising concerns about their potential health impacts. This study provides a comprehensive review of MP-associated chemicals, such as oligomers, plasticizers, stabilizers, and ultraviolet (UV) filters that can be leached out during DW treatment and distribution. The leaching of these chemicals is influenced by various environmental and operating factors, with three major ones identified: MP concentration and polymer type, pH, and contact time. The leaching process is substantially enhanced during the disinfection step of DW treatment, due to ultraviolet light and/or disinfectant-triggered reactions. The study also reviewed human exposure to MPs and associated chemicals in DW, as well as their health impacts on the human nervous, digestive, reproductive, and hepatic systems, especially the neuroendocrine toxicity of endocrine-disrupting chemicals. An overview of MPs in DW, including tap water and bottled water, was also presented to enable a background understanding of MPs-associated chemicals. In short, certain chemicals leached from MPs in DW can have significant implications for human health and demand further research on their long-term health impacts, mitigation strategies, and interactions with other pollutants such as disinfection byproducts (DBPs) and per- and polyfluoroalkyl substances (PFASs). This study is anticipated to facilitate the research and management of MPs in DW and beverages.
Collapse
Affiliation(s)
- Noor Haleem
- Department of Agricultural and Biosystems Engineering, South Dakota State University, Brookings, SD 57007, USA; Institute of Environmental Sciences and Engineering National University of Sciences and Technology, Islamabad 44000, Pakistan
| | - Pradeep Kumar
- Department of Agricultural and Biosystems Engineering, South Dakota State University, Brookings, SD 57007, USA
| | - Cheng Zhang
- Department of Chemistry and Biochemistry, South Dakota State University, Brookings, SD 57007, USA
| | - Yousuf Jamal
- Institute of Chemical Engineering & Technology, University of the Punjab, Lahore 54590, Pakistan
| | - Guanghui Hua
- Department of Civil and Environmental Engineering, South Dakota State University, Brookings, SD 57007, USA
| | - Bin Yao
- Department of Agricultural and Biosystems Engineering, South Dakota State University, Brookings, SD 57007, USA
| | - Xufei Yang
- Department of Agricultural and Biosystems Engineering, South Dakota State University, Brookings, SD 57007, USA.
| |
Collapse
|
12
|
Rafa N, Ahmed B, Zohora F, Bakya J, Ahmed S, Ahmed SF, Mofijur M, Chowdhury AA, Almomani F. Microplastics as carriers of toxic pollutants: Source, transport, and toxicological effects. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 343:123190. [PMID: 38142809 DOI: 10.1016/j.envpol.2023.123190] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/24/2023] [Revised: 11/25/2023] [Accepted: 12/17/2023] [Indexed: 12/26/2023]
Abstract
Microplastic pollution has emerged as a new environmental concern due to our reliance on plastic. Recent years have seen an upward trend in scholarly interest in the topic of microplastics carrying contaminants; however, the available review studies have largely focused on specific aspects of this issue, such as sorption, transport, and toxicological effects. Consequently, this review synthesizes the state-of-the-art knowledge on these topics by presenting key findings to guide better policy action toward microplastic management. Microplastics have been reported to absorb pollutants such as persistent organic pollutants, heavy metals, and antibiotics, leading to their bioaccumulation in marine and terrestrial ecosystems. Hydrophobic interactions are found to be the predominant sorption mechanism, especially for organic pollutants, although electrostatic forces, van der Waals forces, hydrogen bonding, and pi-pi interactions are also noteworthy. This review reveals that physicochemical properties of microplastics, such as size, structure, and functional groups, and environmental compartment properties, such as pH, temperature, and salinity, influence the sorption of pollutants by microplastic. It has been found that microplastics influence the growth and metabolism of organisms. Inadequate methods for collection and analysis of environmental samples, lack of replication of real-world settings in laboratories, and a lack of understanding of the sorption mechanism and toxicity of microplastics impede current microplastic research. Therefore, future research should focus on filling in these knowledge gaps.
Collapse
Affiliation(s)
- Nazifa Rafa
- Department of Geography, University of Cambridge, Downing Place, Cambridge, CB2 3EN, United Kingdom
| | - Bushra Ahmed
- Science and Math Program, Asian University for Women, Chattogram 4000, Bangladesh
| | - Fatema Zohora
- Science and Math Program, Asian University for Women, Chattogram 4000, Bangladesh
| | - Jannatul Bakya
- Science and Math Program, Asian University for Women, Chattogram 4000, Bangladesh
| | - Samiya Ahmed
- Biological and Biomedical Sciences Department, College of Health and Life sciences, Hamad Bin Khalifa University, Doha, Qatar
| | - Shams Forruque Ahmed
- Science and Math Program, Asian University for Women, Chattogram 4000, Bangladesh
| | - M Mofijur
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo, NSW 2007, Australia
| | - Ashfaque Ahmed Chowdhury
- School of Engineering and Technology, Central Queensland University, Rockhampton, QLD 4702, Australia; Centre for Intelligent Systems, Clean Energy Academy, Central Queensland University, Rockhampton, QLD 4702, Australia
| | - Fares Almomani
- Department of Chemical Engineering, Qatar University, Doha, Qatar.
| |
Collapse
|
13
|
Wang X, Dai Y, Li Y, Yin L. Application of advanced oxidation processes for the removal of micro/nanoplastics from water: A review. CHEMOSPHERE 2024; 346:140636. [PMID: 37949189 DOI: 10.1016/j.chemosphere.2023.140636] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/08/2023] [Revised: 11/03/2023] [Accepted: 11/05/2023] [Indexed: 11/12/2023]
Abstract
Micro/nanoplastics (MNPs) have been increasingly found in environments, food, and organisms, arousing wide public concerns. MNPs may enter food chains through water, posing a threat to human health. Therefore, efficient and environmentally friendly technologies are needed to remove MNPs from contaminated aqueous environments. Advanced oxidation processes (AOPs) produce a vast amount of active species, such as hydroxyl radicals (·OH), known for their strong oxidation capacity. As a result, an increasing number of researchers have focused on using AOPs to decompose and remove MNPs from water. This review summarizes the progress in researches on the removal of MNPs from water by AOPs, including ultraviolet photolysis, ozone oxidation, photocatalysis, Fenton oxidation, electrocatalysis, persulfate oxidation, and plasma oxidation, etc. The removal efficiencies of these AOPs for MNPs in water and the influencing factors are comprehensively analyzed, meanwhile, the oxidation mechanisms and reaction pathways are also discussed in detail. Most AOPs can achieve the degradation of MNPs, mainly manifest as the decrease of particle size and the increase of mass loss, but the mineralization rate is low, thus requiring further optimization for improved performance. Investigating various AOPs is crucial for achieving the complete decomposition of MNPs in water. AOPs will undoubtedly play a vital role in the future for the removal of MNPs from water.
Collapse
Affiliation(s)
- Xiaojie Wang
- School of Water Resources and Environment, Beijing Key Laboratory of Water Resources & Environmental Engineering, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing, 100083, China.
| | - Yunrong Dai
- School of Water Resources and Environment, Beijing Key Laboratory of Water Resources & Environmental Engineering, MOE Key Laboratory of Groundwater Circulation and Environmental Evolution, China University of Geosciences (Beijing), Beijing, 100083, China.
| | - Yang Li
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing, 100875, China.
| | - Lifeng Yin
- State Key Laboratory of Water Environment Simulation, School of Environment, Beijing Normal University, Beijing, 100875, China.
| |
Collapse
|
14
|
Vega-Herrera A, Garcia-Torné M, Borrell-Diaz X, Abad E, Llorca M, Villanueva CM, Farré M. Exposure to micro(nano)plastics polymers in water stored in single-use plastic bottles. CHEMOSPHERE 2023; 343:140106. [PMID: 37689148 DOI: 10.1016/j.chemosphere.2023.140106] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2023] [Revised: 09/05/2023] [Accepted: 09/06/2023] [Indexed: 09/11/2023]
Abstract
Human exposure to micro (nano)plastics (MNPLs) has become a significant concern as a potential health threat. Exposure routes include ingestion, inhalation, and dermal contact, being food and drinking water the primary sources of oral exposure. Here we present the quantification of polymers of MNPLs particles from 700 nm to 20 μm in bottled water commercialised in Spain, including an estimation of the potential risk for daily consumers. We evaluated samples from 20 popular brands in 0.5 and 1.5 L plastic bottles. A double-suspect screening approach developed and validated in our research group for drinking water was adapted for bottled water samples. The identification and quantification of MNPLs-polymers in mass units and the tentative identification of plastic additives (PA) until the second level of confidence was carried out based on high-performance liquid chromatography coupled to high-resolution mass spectrometry (HPLC-HRMS). The results showed the presence of polypropylene (PP), polyethylene (PE) and polypropylene terephthalate (PET) in the samples. Among them, PE was the most frequently detected and quantified polymer (55% of samples) followed by PET which was detected in 33% of the samples and showing the highest concentration (4700 ng L-1). The median value of the sum of polymer concentrations was 359 ng L-1. In addition, 28 plastic additives were detected, where at least one of them was present in 100% of the samples. Stabilizers and plasticisers were the most frequently identified. A prioritisation study was performed using a multi-QSAR modelling software, where bis(2-ethylhexyl) adipate and bis(2-ethylhexyl) phthalate were estimated as the most potentially harmful compounds for human health. Overall, findings suggest that bottled water is a non-negligible route to exposure to MNPLs.
Collapse
Affiliation(s)
- Albert Vega-Herrera
- Institute of Environmental Assessment and Water Research (IDAEA), CSIC, C. Jordi Girona, 18-26, 08034, Barcelona, Spain
| | - Maria Garcia-Torné
- Institute of Environmental Assessment and Water Research (IDAEA), CSIC, C. Jordi Girona, 18-26, 08034, Barcelona, Spain
| | - Xavier Borrell-Diaz
- Institute of Environmental Assessment and Water Research (IDAEA), CSIC, C. Jordi Girona, 18-26, 08034, Barcelona, Spain
| | - Esteban Abad
- Institute of Environmental Assessment and Water Research (IDAEA), CSIC, C. Jordi Girona, 18-26, 08034, Barcelona, Spain
| | - Marta Llorca
- Institute of Environmental Assessment and Water Research (IDAEA), CSIC, C. Jordi Girona, 18-26, 08034, Barcelona, Spain
| | - Cristina M Villanueva
- ISGlobal, C. Doctor Aiguader, 88, Barcelona, 08003, Spain; Universitat Pompeu Fabra (UPF), Pl. de La Mercè, 10-12, Barcelona, 08002, Spain; CIBER Epidemiología y Salud Pública (CIBERESP), Av. Monforte de Lemos, 3-5, Madrid, 28029, Spain; Hospital Del Mar Medical Research Institute (IMIM), Passeig Marítim, 25-29, Barcelona, 08028, Spain
| | - Marinella Farré
- Institute of Environmental Assessment and Water Research (IDAEA), CSIC, C. Jordi Girona, 18-26, 08034, Barcelona, Spain.
| |
Collapse
|
15
|
Cavazzoli S, Ferrentino R, Scopetani C, Monperrus M, Andreottola G. Analysis of micro- and nanoplastics in wastewater treatment plants: key steps and environmental risk considerations. ENVIRONMENTAL MONITORING AND ASSESSMENT 2023; 195:1483. [PMID: 37971551 PMCID: PMC10654204 DOI: 10.1007/s10661-023-12030-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/26/2023] [Accepted: 10/23/2023] [Indexed: 11/19/2023]
Abstract
The analysis of micro- and nanoplastics (MNPs) in the environment is a critical objective due to their ubiquitous presence in natural habitats, as well as their occurrence in various food, beverage, and organism matrices. MNPs pose significant concerns due to their direct toxicological effects and their potential to serve as carriers for hazardous organic/inorganic contaminants and pathogens, thereby posing risks to both human health and ecosystem integrity. Understanding the fate of MNPs within wastewater treatment plants (WWTPs) holds paramount importance, as these facilities can be significant sources of MNP emissions. Additionally, during wastewater purification processes, MNPs can accumulate contaminants and pathogens, potentially transferring them into receiving water bodies. Hence, establishing a robust analytical framework encompassing sampling, extraction, and instrumental analysis is indispensable for monitoring MNP pollution and assessing associated risks. This comprehensive review critically evaluates the strengths and limitations of commonly employed methods for studying MNPs in wastewater, sludge, and analogous environmental samples. Furthermore, this paper proposes potential solutions to address identified methodological shortcomings. Lastly, a dedicated section investigates the association of plastic particles with chemicals and pathogens, alongside the analytical techniques employed to study such interactions. The insights generated from this work can be valuable reference material for both the scientific research community and environmental monitoring and management authorities.
Collapse
Affiliation(s)
- Simone Cavazzoli
- Department of Civil, Environmental and Mechanical Engineering (DICAM), University of Trento, Via Mesiano, 77 - 38123, Trento (TN), Italy.
| | - Roberta Ferrentino
- Department of Civil, Environmental and Mechanical Engineering (DICAM), University of Trento, Via Mesiano, 77 - 38123, Trento (TN), Italy
| | - Costanza Scopetani
- Faculty of Biological and Environmental Sciences, Ecosystems and Environment Research Programme, University of Helsinki, Niemenkatu, 73 - 15140, Lahti, Finland
- Department of Chemistry 'Ugo Schiff' (DICUS), University of Florence, Via Della Lastruccia, 13 - 50019, Sesto Fiorentino (FI), Italy
| | - Mathilde Monperrus
- UMR 5254, Université de Pau et des Pays de l'Adour, E2S UPPA, CNRS, IPREM-MIRA, 64600, Anglet, France
| | - Gianni Andreottola
- Department of Civil, Environmental and Mechanical Engineering (DICAM), University of Trento, Via Mesiano, 77 - 38123, Trento (TN), Italy
| |
Collapse
|
16
|
Gupta S, Kumar R, Rajput A, Gorka R, Gupta A, Bhasin N, Yadav S, Verma A, Ram K, Bhagat M. Atmospheric Microplastics: Perspectives on Origin, Abundances, Ecological and Health Risks. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:107435-107464. [PMID: 37452254 DOI: 10.1007/s11356-023-28422-y] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/13/2022] [Accepted: 06/20/2023] [Indexed: 07/18/2023]
Abstract
Microplastic (MP) pollution has aroused a tremendous amount of public and scientific interest worldwide. MPs are found widely ranging from terrestrial to aquatic ecosystems primarily due to the over-exploitation of plastic products and unscientific disposal of plastic waste. There is a large availability of scientific literature on MP pollution in the terrestrial and aquatic ecosystems, especially the marine environments; however, only recently has greater scientific attention been focused on the presence of MPs in the air and its retrospective health implications. Besides, atmospheric transport has been reported to be an important pathway of transport of MPs to the pristine regions of the world. From a health perspective, existing studies suggest that airborne MPs are priority pollutant vectors, that may penetrate deep into the body through inhalation leading to adverse health impacts such as neurotoxicity, cancer, respiratory problems, cytotoxicity, and many more. However, their effects on indoor and outdoor air quality, and on human health are not yet clearly understood due to the lack of enough research studies on that and the non-availability of established scientific protocols for their characterization. This scientific review entails important information concerning the abundance of atmospheric MPs worldwide within the existing literature. A thorough comparison of existing sampling and analytical protocols has been presented. Besides, this review has unveiled the areas of scientific concern especially air quality monitoring which requires immediate attention, with the information gaps to be filled have been addressed.
Collapse
Affiliation(s)
- Shivali Gupta
- Department of Environmental Sciences, University of Jammu (J&K), Jammu, India, 180006
| | - Rakesh Kumar
- Department of Environmental Sciences, University of Jammu (J&K), Jammu, India, 180006.
| | - Akanksha Rajput
- Department of Environmental Sciences, University of Jammu (J&K), Jammu, India, 180006
| | - Ruby Gorka
- Department of Environmental Sciences, University of Jammu (J&K), Jammu, India, 180006
| | - Antima Gupta
- Department of Environmental Sciences, University of Jammu (J&K), Jammu, India, 180006
| | - Nazuk Bhasin
- Department of Environmental Sciences, University of Jammu (J&K), Jammu, India, 180006
- IESD, Banaras Hindu University, Varanasi, India, 221005
| | - Sudesh Yadav
- Jawaharlal Nehru University, New Delhi, India, 110067
| | - Anju Verma
- Jawaharlal Nehru University, New Delhi, India, 110067
| | - Kirpa Ram
- IESD, Banaras Hindu University, Varanasi, India, 221005
| | - Madulika Bhagat
- Department of Biotechnology, University of Jammu (J&K), Jammu, India, 180006
| |
Collapse
|
17
|
Meera G, Sasidharan Pillai IM, Reji PG, Sajithkumar KJ, Priya KL, Chellappan S. Coagulation studies on photodegraded and photocatalytically degraded polystyrene microplastics using polyaluminium chloride. WASTE MANAGEMENT (NEW YORK, N.Y.) 2023; 170:329-340. [PMID: 37741081 DOI: 10.1016/j.wasman.2023.09.018] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/10/2023] [Revised: 09/01/2023] [Accepted: 09/15/2023] [Indexed: 09/25/2023]
Abstract
Microplastics are ubiquitous persistent emerging contaminants, and its presence has been detected even in the most pristine and fragile ecosystems. Advanced oxidation processes are one of the novel degradation technologies used for the elimination of microplastics from the environment. In this study, the effect of ultraviolet C (UV-C, 253.7 nm) and ultraviolet A (UV-A, 365 nm) irradiations on polystyrene (PS) microplastic properties in the presence and absence of titanium dioxide were studied along with their coagulation performances using polyaluminium chloride (PAC). The effects of solar irradiation on the chemical properties of microplastics in aqueous and dry conditions were also investigated. PS microplastics (1.5 g) in three size ranges, 300-150 μm, 150-75 μm, and <75 μm were used during this experiment. After 45 days of irradiation, samples showed discolouration, brittleness, and loss of hydrophobicity. Images obtained from scanning electron microscope revealed smoothening and melting of PS surfaces upon UV exposure. Attenuated total reflectance- Fourier transform infrared spectroscopy and X-ray photon spectroscopy of photoaged samples revealed chemical alterations, bond cleavage and formation of oxygenated functional groups on microplastic surfaces. PAC coagulation of samples before and after UV irradiation showed drastic differences in removal efficiencies, with UV-C irradiated microplastics exhibiting maximum efficiency. Large sized and photocatalytically degraded microplastics showed better removal efficiencies than small sized particles. The 300-150 μm sized PS microplastic, degraded photo catalytically under UV-C irradiation showed approximately 99 % removal efficiency, while PS < 75 μm photodegraded under UV-A irradiation showed only 74.2 % removal efficiency.
Collapse
Affiliation(s)
- G Meera
- Environmental Engineering and Management, UKF College of Engineering and Technology, Kollam, Kerala, India
| | | | - P G Reji
- Environmental Engineering and Management, UKF College of Engineering and Technology, Kollam, Kerala, India
| | - K J Sajithkumar
- Environmental Engineering and Management, UKF College of Engineering and Technology, Kollam, Kerala, India; School for Sustainable Development, Amrita Vishwa Vidyapeetham, Kollam, Kerala, India
| | - K L Priya
- Department of Civil Engineering, TKM College of Engineering, Kollam, Kerala, India
| | - Suchith Chellappan
- Environmental Engineering and Management, UKF College of Engineering and Technology, Kollam, Kerala, India
| |
Collapse
|
18
|
Wang X, Zhu Z, Jiang J, Li R, Xiong J. Preparation of heterojunction C 3N 4/WO 3 photocatalyst for degradation of microplastics in water. CHEMOSPHERE 2023:139206. [PMID: 37315863 DOI: 10.1016/j.chemosphere.2023.139206] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/10/2023] [Revised: 05/12/2023] [Accepted: 06/11/2023] [Indexed: 06/16/2023]
Abstract
In this study, a WO3/g-C3N4 composite photocatalyst was synthesized via a hydrothermal method and characterized for its potential application in photocatalytic H2 generation from PET degradation. XRD analysis revealed that the hexagonal WO3 crystal structure was achieved after 10 h of hydrothermal time, with particles of suitable size for uniform loading on the g-C3N4 surface. SEM images showed the successful loading of WO3 nanorods onto the g-C3N4 surface, significantly increasing the specific surface area. FTIR and UV-vis diffuse reflectance spectroscopy confirmed the formation of a Z-type heterojunction between WO3 and g-C3N4. Photoluminescence measurements indicated a reduced rate of electron-hole pair recombination in the composite. The 30% WO3/g-C3N4 composite demonstrated a high H2 evolution rate of 14.21 mM and excellent stability in PET solution under visible light irradiation. 1H NMR and EPR spectroscopy analyses revealed the degradation of PET into small molecular compounds and the generation of active radicals, including ·O2-, during the reaction. Overall, the WO3/g-C3N4 composite exhibited promising potential for photocatalytic H2 production and PET degradation.
Collapse
Affiliation(s)
- Xiang Wang
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100, Chongqing, China.
| | - Zhihao Zhu
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100, Chongqing, China
| | - Jinwei Jiang
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100, Chongqing, China
| | - Ruiling Li
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100, Chongqing, China
| | - Junjie Xiong
- College of Environmental and Chemical Engineering, Chongqing Three Gorges University, Wanzhou, 404100, Chongqing, China
| |
Collapse
|
19
|
Ahmed ASS, Billah MM, Ali MM, Bhuiyan MKA, Guo L, Mohinuzzaman M, Hossain MB, Rahman MS, Islam MS, Yan M, Cai W. Microplastics in aquatic environments: A comprehensive review of toxicity, removal, and remediation strategies. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 876:162414. [PMID: 36868275 DOI: 10.1016/j.scitotenv.2023.162414] [Citation(s) in RCA: 20] [Impact Index Per Article: 20.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/14/2022] [Revised: 02/10/2023] [Accepted: 02/19/2023] [Indexed: 06/18/2023]
Abstract
The occurrence of microplastics (MPs) in aquatic environments has been a global concern because they are toxic and persistent and may serve as a vector for many legacies and emerging pollutants. MPs are discharged to aquatic environments from different sources, especially from wastewater plants (WWPs), causing severe impacts on aquatic organisms. This study mainly aims to review the Toxicity of MPs along with plastic additives in aquatic organisms at various trophic compartments and available remediation methods/strategies for MPs in aquatic environments. Occurrences of oxidative stress, neurotoxicity, and alterations in enzyme activity, growth, and feeding performance were identical in fish due to MPs toxicity. On the other hand, growth inhibition and ROS formation were observed in most of the microalgae species. In zooplankton, potential impacts were acceleration of premature molting, growth retardation, mortality increase, feeding behaviour, lipid accumulation, and decreased reproduction activity. MPs togather with additive contaminants could also exert some toxicological impacts on polychaete, including neurotoxicity, destabilization of the cytoskeleton, reduced feeding rate, growth, survivability and burrowing ability, weight loss, and high rate of mRNA transcription. Among different chemical and biological treatments for MPs, high removal rates have been reported for coagulation and filtration (>86.5 %), electrocoagulation (>90 %), advanced oxidation process (AOPs) (30 % to 95 %), primary sedimentation/Grit chamber (16.5 % to 58.84 %), adsorption removal technique (>95 %), magnetic filtration (78 % to 93 %), oil film extraction (>95 %), and density separation (95 % to 100 %). However, desirable extraction methods are required for large-scale research in MPs removal from aquatic environments.
Collapse
Affiliation(s)
- A S Shafiuddin Ahmed
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong; Department of Infectious Diseases and Public Health, City University of Hong Kong, Hong Kong.
| | - Md Masum Billah
- Inter-Departmental Research Centre for Environmental Science-CIRSA, University of Bologna, Ravenna Campus, Italy
| | - Mir Mohammad Ali
- Department of Aquaculture, Sher-e-Bangla Agricultural University, Dhaka, Bangladesh
| | - Md Khurshid Alam Bhuiyan
- Department of Physical Chemistry, Faculty of Marine and Environmental Sciences, University of Cadiz, Cadiz, Spain
| | - Laodong Guo
- School of Freshwater Sciences, University of Wisconsin-Milwaukee, Milwaukee, USA
| | - Mohammad Mohinuzzaman
- Department of Environmental Science and Disaster Management, Noakhali Science and Technology University, Sonapur, Bangladesh
| | - M Belal Hossain
- Department of Fisheries and Marine Science, Noakhali Science and Technology University, Sonapur, Bangladesh; School of Engineering and Built Environment, Griffith University, Brisbane, Australia
| | - M Safiur Rahman
- Water Quality Research Laboratory, Chemistry Division, Atomic Energy Center, Atomic Energy Commission, Dhaka, Bangladesh
| | - Md Saiful Islam
- Department of Soil Science, Patuakhali Science and Technology University, Patuakhali, Bangladesh
| | - Meng Yan
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong
| | - Wenlong Cai
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Hong Kong; Department of Infectious Diseases and Public Health, City University of Hong Kong, Hong Kong
| |
Collapse
|
20
|
Meegoda JN, Hettiarachchi MC. A Path to a Reduction in Micro and Nanoplastics Pollution. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2023; 20:ijerph20085555. [PMID: 37107837 PMCID: PMC10139116 DOI: 10.3390/ijerph20085555] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/17/2023] [Accepted: 04/13/2023] [Indexed: 05/11/2023]
Abstract
Microplastics (MP) are plastic particles less than 5 mm in size. There are two categories of MP: primary and secondary. Primary or microscopic-sized MP are intentionally produced material. Fragmentation of large plastic debris through physical, chemical, and oxidative processes creates secondary MP, the most abundant type in the environment. Microplastic pollution has become a global environmental problem due to their abundance, poor biodegradability, toxicological properties, and negative impact on aquatic and terrestrial organisms including humans. Plastic debris enters the aquatic environment via direct dumping or uncontrolled land-based sources. While plastic debris slowly degrades into MP, wastewater and stormwater outlets discharge a large amount of MP directly into water bodies. Additionally, stormwater carries MP from sources such as tire wear, artificial turf, fertilizers, and land-applied biosolids. To protect the environment and human health, the entry of MP into the environment must be reduced or eliminated. Source control is one of the best methods available. The existing and growing abundance of MP in the environment requires the use of multiple strategies to combat pollution. These strategies include reducing the usage, public outreach to eliminate littering, reevaluation and use of new wastewater treatment and sludge disposal methods, regulations on macro and MP sources, and a wide implementation of appropriate stormwater management practices such as filtration, bioretention, and wetlands.
Collapse
Affiliation(s)
- Jay N. Meegoda
- Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, NJ 07102, USA
- Correspondence: ; Tel.: +1-973-596-2464
| | | |
Collapse
|
21
|
Lu Y, Li MC, Lee J, Liu C, Mei C. Microplastic remediation technologies in water and wastewater treatment processes: Current status and future perspectives. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 868:161618. [PMID: 36649776 DOI: 10.1016/j.scitotenv.2023.161618] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/29/2022] [Revised: 01/06/2023] [Accepted: 01/10/2023] [Indexed: 06/17/2023]
Abstract
Microplastics (MPs) are a type of contaminants produced during the use and disposal of plastic products, which are ubiquitous in our lives. With the high specific surface area and strong hydrophobicity, MPs can adsorb various hazardous microorganisms and chemical contaminants from the environment, causing irreversible damage to our humans. It is reported that the MPs have been detected in infant feces and human blood. Therefore, the presence of MPs has posed a significant threat to human health. It is critically essential to develop efficient, scalable and environmentally-friendly methods to remove MPs. Herein, recent advances in the MPs remediation technologies in water and wastewater treatment processes are overviewed. Several approaches, including membrane filtration, adsorption, chemically induced coagulation-flocculation-sedimentation, bioremediation, and advanced oxidation processes are systematically documented. The characteristics, mechanisms, advantages, and disadvantages of these methods are well discussed and highlighted. Finally, the current challenges and future trends of these methods are proposed, with the aim of facilitating the remediation of MPs in water and wastewater treatment processes in a more efficient, scalable, and environmentally-friendly way.
Collapse
Affiliation(s)
- Yang Lu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Mei-Chun Li
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China; School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China.
| | - Juhyeon Lee
- College of Information Science and Technology, Nanjing Forestry University, Nanjing 210037, China
| | - Chaozheng Liu
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Changtong Mei
- Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| |
Collapse
|
22
|
Goveas LC, Nayak S, Kumar PS, Rangasamy G, Vidya SM, Vinayagam R, Selvaraj R, Vo DVN. Microplastics occurrence, detection and removal with emphasis on insect larvae gut microbiota. MARINE POLLUTION BULLETIN 2023; 188:114580. [PMID: 36657228 DOI: 10.1016/j.marpolbul.2023.114580] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/10/2022] [Revised: 12/22/2022] [Accepted: 01/02/2023] [Indexed: 06/17/2023]
Abstract
Microplastics have been identified in all living forms including human beings, the present need is to restrain its spread and devise measures to remediate microplastics from polluted ecosystems. In this regard, the present review emphasizes on the occurrence, sources detection and toxic effects of microplastics in various ecosystems. The removal of microplastics is prevalent by various physico-chemical and biological methods, although the removal efficiency by biological methods is low. It has been noted that the degradation of plastics by insect gut larvae is a well-known aspect, however, the underlying mechanism has not been completely identified. Studies conducted have shown the magnificent contribution of gut microbiota, which have been isolated and exploited for microplastic remediation. This review also focuses on this avenue, as it highlights the contribution of insect gut microbiota in microplastic degradation along with challenges faced and future prospects in this area.
Collapse
Affiliation(s)
- Louella Concepta Goveas
- Nitte (Deemed to be University), NMAM Institute of Technology (NMAMIT), Department of Biotechnology Engineering, Nitte, India
| | - Sneha Nayak
- Nitte (Deemed to be University), NMAM Institute of Technology (NMAMIT), Department of Biotechnology Engineering, Nitte, India
| | - P Senthil Kumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai 603 110, India; Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Chennai 603 110, India; Department of Biotechnology Engineering and Food Technology, Chandigarh University, Mohali 140413, India; School of Engineering, Lebanese American University, Byblos, Lebanon.
| | - Gayathri Rangasamy
- School of Engineering, Lebanese American University, Byblos, Lebanon; Department of Sustainable Engineering, Institute of Biotechnology, Saveetha School of Engineering, SIMATS, Chennai 602105, India
| | - S M Vidya
- Nitte (Deemed to be University), NMAM Institute of Technology (NMAMIT), Department of Biotechnology Engineering, Nitte, India.
| | - Ramesh Vinayagam
- Department of Chemical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka 576104, India
| | - Raja Selvaraj
- Department of Chemical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka 576104, India.
| | - Dai Viet N Vo
- Institute of Environmental Sciences, Nguyen Tat Thanh University, Ho Chi Minh City, Viet Nam
| |
Collapse
|
23
|
Dos Santos NDO, Busquets R, Campos LC. Insights into the removal of microplastics and microfibres by Advanced Oxidation Processes. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 861:160665. [PMID: 36473655 DOI: 10.1016/j.scitotenv.2022.160665] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 11/22/2022] [Accepted: 11/29/2022] [Indexed: 06/17/2023]
Abstract
Water treatment plants' effluents are hotspots of microplastics (MPs) and microfibres (MFs) released into the aquatic environment because they were not designed to capture these particles. Special attention should be given to MFs, since they mainly come from laundry and are related to one of the main MP shapes detected in water and wastewater treatment plants. In this sense, Advanced Oxidation Processes (AOPs) could be a feasible solution for tackling MP and MF pollution, however, it is still premature to extract conclusions due to the limited number of studies on the degradation of these particles (specifically MFs) using AOPs. This review addresses the impacts of AOPs on MPs/MFs, focusing on their degradation efficiency, toxicity, and sustainability of the processes, among other aspects. The review points out that polyamide MFs can achieve mass loss >90% by photocatalytic system using TiO2. Also, the low oxidation of MPs (<30 %) by conventional Fenton process affects mainly the surface of the MPs. However, other Fenton-based processes can provide better removal of some types of MPs, mainly using temperatures >100 °C, reaction time ≥ 5 h, and initial pH ≤ 3, achieving MP weight loss up to 96 %. Despite these results, better operating conditions are still required for AOPs since the ones reported so far are not feasible for full-scale application. Additionally, ozonation in treatment plants has increased the fragmentation of MPs (including MFs), leading to a new generation of MPs. More attention is needed on toxicity effects of intermediates and methods of analysis employed for the analysis of MPs/MFs in wastewater effluent should be standardized so that studies can be compared effectively. Future research should focus on the sustainability of the AOP for MP removal in water treatment (power consumption, chemicals consumed and operational costs) for a better understanding of full-scale applicability of AOP adapted to MP treatment.
Collapse
Affiliation(s)
- Naiara de Oliveira Dos Santos
- Department of Civil, Environmental & Geomatic Engineering, Faculty of Engineering, University College London, London WC1E 6BT, United Kingdom
| | - Rosa Busquets
- Department of Civil, Environmental & Geomatic Engineering, Faculty of Engineering, University College London, London WC1E 6BT, United Kingdom; School of Life Sciences, Pharmacy and Chemistry, Faculty of Health, Science, Social Care and Education, Kingston University, Penrhyn Road, Kingston Upon Thames KT1 2EE, United Kingdom
| | - Luiza C Campos
- Department of Civil, Environmental & Geomatic Engineering, Faculty of Engineering, University College London, London WC1E 6BT, United Kingdom.
| |
Collapse
|
24
|
Jeong Y, Gong G, Lee HJ, Seong J, Hong SW, Lee C. Transformation of microplastics by oxidative water and wastewater treatment processes: A critical review. JOURNAL OF HAZARDOUS MATERIALS 2023; 443:130313. [PMID: 36372022 DOI: 10.1016/j.jhazmat.2022.130313] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/07/2022] [Revised: 10/29/2022] [Accepted: 11/01/2022] [Indexed: 06/16/2023]
Abstract
Microplastics (MPs) are contaminants of emerging concern that accumulate in various environments, where they pose threats to both the ecosystem and public health. Since MPs have been detected in drinking water resources and wastewater effluents, more efficient treatment is needed at wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). This review discusses the potential of biological, photochemical, Fenton (-like) systems, ozonation, and other oxidation processes in the treatment of MPs in terms of their indicators of oxidation such as mass loss and surface oxidation. The oxidation processes were further analyzed in terms of limitations and environmental implications. Most previous studies examining MPs degradation using conventional treatments-such as UV disinfection, ozonation, and chlorination-employed significantly higher doses than the common doses applied in DWTPs and WWTPs. Owing to such dose gaps, the oxidative transformation of MPs observed in many previous studies are not likely to occur under practical conditions. Some novel oxidation processes showed promising MPs treatment efficiencies, while many of them have not yet been applied on a larger scale due to high costs and the lack of extensive basic research. Health and environmental impacts related to the discharge of oxidized MPs in effluents should be considered carefully in different aspects: the role as vectors of external pollutants, release of organic compounds (including organic byproducts from oxidation) and fragmentation into smaller particles as MPs circulate in the ecosystem as well as the possibility of bioaccumulation. Future research should also focus on ways to incorporate developed oxidation processes in DWTPs and WWTPs to mitigate MPs contamination.
Collapse
Affiliation(s)
- Yeonseo Jeong
- Department of Chemical Engineering and Materials Science, University of Minnesota, 21 Washington Ave. SE, Minneapolis, MN 55455-0132, United States
| | - Gyeongtaek Gong
- Clean Energy Research Center, Division of Energy and Environment Technology, KIST-School, University of Science and Technology, Korea Institute of Science and Technology, 5, Hwarang-ro, Seongbuk-gu, Seoul 02792, Republic of Korea
| | - Hye-Jin Lee
- School of Chemical and Biological Engineering, Institute of Chemical Process (ICP), and Institute of Engineering Research, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 08826, Republic of Korea
| | - Jihye Seong
- School of Chemical and Biological Engineering, Institute of Chemical Process (ICP), and Institute of Engineering Research, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 08826, Republic of Korea
| | - Seok Won Hong
- Center for Water Cycle Research, Division of Energy and Environment Technology, KIST-School, University of Science and Technology, Korea Institute of Science and Technology, 5, Hwarang-ro, Seongbuk-gu, Seoul 02792, Republic of Korea.
| | - Changha Lee
- School of Chemical and Biological Engineering, Institute of Chemical Process (ICP), and Institute of Engineering Research, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 08826, Republic of Korea.
| |
Collapse
|
25
|
Yuan X, Geng G, Liu X, Wang Z, Wang Z, Shah NS, Song J, Guo Y, Kong L, Liu S, Zhang W. Cobalt and nitrogen co-doped monolithic carbon foam for ultrafast degradation of emerging organic pollutants via peroxymonosulfate activation. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2023; 249:114455. [PMID: 38321674 DOI: 10.1016/j.ecoenv.2022.114455] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/18/2022] [Revised: 11/22/2022] [Accepted: 12/18/2022] [Indexed: 02/08/2024]
Abstract
Cobalt-based catalysts are expected as one of the most promising peroxymonosulfate (PMS) activators for the removal of organic pollutants from industrial wastewater. However, the easy agglomeration, difficult separation, and secondary pollution of cobalt ions limit their practical application. In this study, a novel, highly efficient, reusable cobalt and nitrogen co-doped monolithic carbon foam (Co-N-CMF) was utilized to activate PMS for ultrafast pollutant degradation. Co-N-CMF (0.2 g/L) showed ultrafast catalytic kinetics and higher total organic carbon (TOC) removal efficiency. Bisphenol A, ciprofloxacin, 2,4-dichlorophenoxyacetic acid, and 2,4-dichlorophenol could be completely degraded after 2, 4, 5, and 5 min, and the TOC removal efficiencies were 77.4 %, 68.9 %, 72.8 %, and 79.8 %, respectively, corresponding to the above pollution. The sulfate radical (SO4•-) was the main reactive oxygen species in Co-N-CMF/PMS based on electron paramagnetic resonance. The ecological structure-activity relationship program analysis via the quantitative structure activity relationship analysis and phytotoxicity assessment revealed that the Co-N-CMF/PMS system demonstrates good ecological safety and ecological compatibility. The Co-N-CMF catalyst has good catalytic activity and facile recycling, which provides a fine method with excellent PMS activation capacity for 2,4-dichlorophenol elimination from simulated industrial wastewater. This study provides new insights into the development of monolithic catalysts for ultrafast wastewater treatment via PMS activation.
Collapse
Affiliation(s)
- Xiaoying Yuan
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China
| | - Guomin Geng
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China
| | - Xu Liu
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China
| | - Zucheng Wang
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China
| | - Zhaoxin Wang
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China
| | - Noor Samad Shah
- Department of Environmental Sciences, COMSATS University Islamabad, Vehari Campus, 61100, Pakistan
| | - Jianjun Song
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China.
| | - Yingshu Guo
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China.
| | - Lingshuai Kong
- Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100, PR China.
| | - Shuhua Liu
- School of Pharmaceutical Sciences, Shandong Analysis and Test Center, Qilu University of Technology (Shandong Academy of Sciences) Jinan 250014, PR China
| | - Wenyu Zhang
- Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Chemical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, PR China
| |
Collapse
|
26
|
Chi N, Yang Z, Feng L, Li X, Zhu J, Jiang Z, Zheng H. Efficient removal of RR2 dye by electro- Ce(III) process with its elegant arts and attractive charm in performance, energy consumption and mechanism. ENVIRONMENTAL RESEARCH 2023; 216:114590. [PMID: 36252834 DOI: 10.1016/j.envres.2022.114590] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/07/2022] [Revised: 10/03/2022] [Accepted: 10/11/2022] [Indexed: 06/16/2023]
Abstract
Reactive red 2 (RR2) azo dye wastewater poses a serious hazard to the water environment health, so using a novel and efficient Electro- Ce(III) (E- Ce(III)) process takes on a critical significance in treating RR2 dye wastewater. In this study, the effects of a variety of single-factor conditions on RR2 removal efficiency were evaluated in depth. The results indicated that the optimal experimental conditions are as reaction temperature of 25 °C, Na2SO4 concentration of 25 mM, Ce(III) concentration of 0.3 mM, pH of 4.0, and current density of 40.0 mA/cm2. When the RR2 dye wastewater was treated for 40 min under the optimal experimental conditions, a high removal rate of 99.8% for RR2 was obtained. It is suggested that the background ion PO43- in the dye wastewater inhibits the E-Ce (III) process, whereas Cl- facilitates this process. Moreover, the yield of Ce(IV) increases with the increase of the current density. At the current density of 40.0 mA/cm2, a reasonable energy consumption of 3.85 kW h/gTOC for the process was obtained after the 3-h treatment. The effects of different degradation processes (including Direct Electrooxidation (DEO), single Ce(III), and E-Ce (III)) on RR2 removal efficiency and TOC change were compared. The types of oxidizing substances in the E-Ce (III) process were detected, and the mechanism of RR2 oxidative degradation in the E-Ce (III) process was summarized. The result suggests that the E-Ce (III) process has low power consumption. Meanwhile, in the E-Ce (III) process, free reactive Ce(IV) with strong oxidation is continuously generated, RR2 can be efficiently degraded. And the continuous cycle transformation between Ce(III) and Ce(IV) maintains the strong oxidation of the process. The contribution of free reactive Ce(IV) and DEO to RR2 degradation was obtained as 58.8% and 39.8%, respectively. The combined effect of Ce(IV) and DEO played a major role in the E-Ce (III) process, while ·OH exhibited a relatively weak effect (nearly 1.4%). RR2 was comprised of 13 major intermediates, and the biodegradability of wastewater was improved significantly after treatment, thus facilitating the further mineralization and biodegradation of the products. The E- Ce(III) process is novel, efficient, and environment-friendly, and has a large market application space, suggesting that it can be applied as an efficient, economic, and sustainable water treatment process.
Collapse
Affiliation(s)
- Nianping Chi
- School of Municipal and Geomatics Engineering, Hunan City University, Hunan Province Engineering &Technology Research Center for Rural Water Quality Safety, Yiyang, Hunan, 413000, China
| | - Zhenwen Yang
- School of Municipal and Geomatics Engineering, Hunan City University, Hunan Province Engineering &Technology Research Center for Rural Water Quality Safety, Yiyang, Hunan, 413000, China
| | - Li Feng
- School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou, 510006, China.
| | - Xuhao Li
- School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou, 510006, China
| | - Junren Zhu
- Chongqing City Management College, Chongqing, 401331, PR China
| | - Zhenzhen Jiang
- Chongqing Vocational Institute of Engineering, Chongqing, 402260, PR China
| | - Huaili Zheng
- Key Laboratory of the Three Gorges Reservoir Region's Eco-Environment, Ministry of Education, Chongqing University, Chongqing, 400045, China
| |
Collapse
|
27
|
Simon-Sánchez L, Grelaud M, Lorenz C, Garcia-Orellana J, Vianello A, Liu F, Vollertsen J, Ziveri P. Can a Sediment Core Reveal the Plastic Age? Microplastic Preservation in a Coastal Sedimentary Record. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2022; 56:16780-16788. [PMID: 36375087 PMCID: PMC9730841 DOI: 10.1021/acs.est.2c04264] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/15/2022] [Revised: 10/24/2022] [Accepted: 10/25/2022] [Indexed: 06/16/2023]
Abstract
The seafloor is the major sink for microplastic (MP) pollutants. However, there is a lack of robust data on the historical evolution of MP pollution in the sediment compartment, particularly the sequestration and burial rate of small MPs. By combining a palaeoceanographic approach and state-of-the-art analytical methods for MP identification down to 11 μm in size, we present the first high-resolution reconstruction of MP pollution from an undisturbed sediment core collected in the NW Mediterranean Sea. Furthermore, we investigate the fate of MPs once buried in the sediments by evaluating the changes in the size distribution of the MPs and the weathering status of the polyolefins, polyethylene, and polypropylene. Our results indicate that the MP mass sequestered in the sediment compartment mimics the global plastic production from 1965 to 2016. We observed an increase in the weathering status of the polyolefins as the size decreased. However, the variability in the size and weathering status of the MPs throughout the sedimentary record indicated that these pollutants, once incorporated into sediments, remain preserved with no further degradation under conditions lacking remobilization.
Collapse
Affiliation(s)
- Laura Simon-Sánchez
- Institute
of Environmental Science and Technology (ICTA), Autonomous University of Barcelona (UAB), Bellaterra08193, Spain
| | - Michaël Grelaud
- Institute
of Environmental Science and Technology (ICTA), Autonomous University of Barcelona (UAB), Bellaterra08193, Spain
| | - Claudia Lorenz
- Department
of the Built Environment, Aalborg University, Thomas Manns Vej 23, Aalborg Øst9220, Denmark
| | - Jordi Garcia-Orellana
- Institute
of Environmental Science and Technology (ICTA), Autonomous University of Barcelona (UAB), Bellaterra08193, Spain
- Departament
de Física, Universitat Autònoma
de Barcelona, Autonomous University of Barcelona (UAB), Bellaterra08193, Spain
| | - Alvise Vianello
- Department
of the Built Environment, Aalborg University, Thomas Manns Vej 23, Aalborg Øst9220, Denmark
| | - Fan Liu
- Department
of the Built Environment, Aalborg University, Thomas Manns Vej 23, Aalborg Øst9220, Denmark
| | - Jes Vollertsen
- Department
of the Built Environment, Aalborg University, Thomas Manns Vej 23, Aalborg Øst9220, Denmark
| | - Patrizia Ziveri
- Institute
of Environmental Science and Technology (ICTA), Autonomous University of Barcelona (UAB), Bellaterra08193, Spain
- Catalan
Institution for Research and Advanced Studies (ICREA), Pg. Lluís Companys 23, Barcelona08010, Spain
| |
Collapse
|
28
|
Nguyen MK, Hadi M, Lin C, Nguyen HL, Thai VB, Hoang HG, Vo DVN, Tran HT. Microplastics in sewage sludge: Distribution, toxicity, identification methods, and engineered technologies. CHEMOSPHERE 2022; 308:136455. [PMID: 36116626 DOI: 10.1016/j.chemosphere.2022.136455] [Citation(s) in RCA: 24] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/13/2022] [Revised: 08/28/2022] [Accepted: 09/11/2022] [Indexed: 06/15/2023]
Abstract
Microplastic pollution is becoming a global challenge due to its long-term accumulation in the environment, causing adverse effects on human health and the ecosystem. Sludge discharged from wastewater treatment plants (WWTPs) plays a critical role as a carrier and primary source of environmental microplastic contamination. A significantly average microplastic variation between 1000 and 301,400 particles kg-1 has been reported in the sludge samples. In recent years, advanced technologies have been successfully applied to address this issue, including adsorption, advanced oxidation processes (AOPs), and membrane bioreactors (MBRs). Adsorption technologies are essential to utilizing novel adsorbents (e.g., biochar, graphene, zeolites) for effectively removing MPs. Especially, the removal efficiency of polymer microspheres from an aqueous solution by Mg/Zn modified magnetic biochars (Mg/Zn-MBC) was obtained at more than 95%. Also, advanced oxidation processes (AOPs) are widely applied to degrade microplastic contaminants, in which photocatalytic by semiconductors (e.g., TiO2 and ZnO) is a highly suitable approach to promote the degradation reactions owing to strongly hydroxyl radicals (OH*). Biological degradation-aided microorganisms (e.g., bacterial and fungal strains) have been reported to be suitable for removing microplastics. Yet, it was affected by biotic and abiotic factors of the environmental conditions (e.g., pH, light, temperature, moisture, bio-surfactants, microorganisms, enzymes) as well as their polymer characteristics, i.e., molecular weight, functional groups, and crystallinity. Notably, membrane bioreactors (MBRs) showed the highest efficiency in removing up to 99% microplastic particles and minimizing their contamination in sewage sludge. Further, MBRs illustrate the suitability for treating high-strength compounds, e.g., polymer debris and microplastic fibers from complex industrial wastewater. Finally, this study provided a comprehensive understanding of potential adverse risks, transportation pathways, and removal mechanisms of microplastic, which full-filled the knowledge gaps in this field.
Collapse
Affiliation(s)
- Minh Ky Nguyen
- Ph.D. Program in Maritime Science and Technology, National Kaohsiung University of Science and Technology, Kaohsiung, 81157, Taiwan; Faculty of Environment and Natural Resources, Nong Lam University, Ho Chi Minh City, 700000, Viet Nam
| | - Mohammed Hadi
- Department of Ocean Operations and Civil Engineering, Norwegian University of Science and Technology, Norway
| | - Chitsan Lin
- Ph.D. Program in Maritime Science and Technology, National Kaohsiung University of Science and Technology, Kaohsiung, 81157, Taiwan; Department of Marine Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, 81157, Taiwan.
| | - Hoang-Lam Nguyen
- Department of Civil Engineering, McGill University, Montreal, Canada
| | - Vu-Binh Thai
- Institute for Environment and Resource, Vietnam National University Ho Chi Minh City, Ho Chi Minh, 700000, Viet Nam
| | - Hong-Giang Hoang
- Faculty of Health Sciences and Finance - Accounting, Dong Nai Technology University, Bien Hoa, Dong Nai, 76100, Viet Nam
| | - Dai-Viet N Vo
- Center of Excellence for Green Energy and Environmental Nanomaterials (CE@GrEEN), Nguyen Tat Thanh University, Ho Chi Minh City, 700000, Viet Nam
| | - Huu-Tuan Tran
- Laboratory of Ecology and Environmental Management, Science and Technology Advanced Institute, Van Lang University, Ho Chi Minh City, Viet Nam; Faculty of Applied Technology, School of Engineering and Technology, Van Lang University, Ho Chi Minh City, 700000, Viet Nam.
| |
Collapse
|
29
|
Khan NA, Khan AH, López-Maldonado EA, Alam SS, López López JR, Méndez Herrera PF, Mohamed BA, Mahmoud AED, Abutaleb A, Singh L. Microplastics: Occurrences, treatment methods, regulations and foreseen environmental impacts. ENVIRONMENTAL RESEARCH 2022; 215:114224. [PMID: 36058276 DOI: 10.1016/j.envres.2022.114224] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 08/10/2022] [Accepted: 08/25/2022] [Indexed: 06/15/2023]
Abstract
Microplastics are a silent threat that represent a high degree of danger to the environment in its different ecosystems and of course will also have an important impact on the health of living organisms. It is evident the need to have effective treatments for their treatment, however this is not a simple task, this as a result of the behavior of microplastics in wastewater treatment plants due to their different types and nature, their long molecular chain, reactivity against water, size, shape and the functional groups they carry. Wastewater treatment plants are at the circumference of the release of these wastes into the environment. They often act as a source of many contaminations, which makes this problem more complex. Challenges such as detection in the current scenario using the latest analytical techniques impede the correct understanding of the problem. Due to microplastics, treatment plants have operational and process stability problems. This review paper will present the in-depth situation of occurrence of microplastics, their detection, conventional and advanced treatment methods as well as implementation of legislations worldwide in a comprehensive manner. It has been observed that no innovative or new technologies have emerged to treat microplastics. Therefore, in this article, technologies targeting wastewater treatment plants are critically analyzed. This will help to understand their fate, but also to develop state-of-the-art technologies or combinations of them for the selective treatment of microplastics. The pros and cons of the treatment methods adopted and the knowledge gaps in legislation regarding their implementation are also comprehensively analyzed. This critical work will offer the development of new strategies to restrict microplastics.
Collapse
Affiliation(s)
- Nadeem A Khan
- Department of Civil Engineering, Jamia Millia Islamia Central University, New Delhi, 110025, India; Department of Civil Engineering, Mewat Engineering College, Nuh, Haryana, 122107, India.
| | - Afzal Husain Khan
- Engineering Department, College of Engineering, Jazan University, 45142, Jazan, Saudi Arabia.
| | - Eduardo Alberto López-Maldonado
- Faculty of Chemical Sciences and Engineering, Autonomous University of Baja, California, CP, 22390, Tijuana, Baja California, Mexico.
| | - Shah Saud Alam
- Department of Mechanical Engineering, The University of Kansas, 1530W 15th St., Lawrence, KS, 66045, USA.
| | - Juan Ramon López López
- Facultad de Ciencias Químico-Biológicas, Universidad Autónoma de Sinaloa, Av. Las. Américas S/N, C.P. 80000, Culiacán, Sinaloa, Mexico
| | - Perla Fabiola Méndez Herrera
- Facultad de Ciencias Químico-Biológicas, Universidad Autónoma de Sinaloa, Av. Las. Américas S/N, C.P. 80000, Culiacán, Sinaloa, Mexico
| | - Badr A Mohamed
- Department of Civil Engineering, University of British Columbia, 6250 Applied Science Lane, Vancouver, BC, V6T 1Z4, Canada; Department of Agricultural Engineering, Cairo University, El-Gamma Street, Giza, 12613, Egypt.
| | - Alaa El Din Mahmoud
- Environmental Sciences Department, Faculty of Science, Alexandria University, 21511, Alexandria, Egypt; Green Technology Group, Faculty of Science, Alexandria University, 21511, Alexandria, Egypt.
| | - Ahmad Abutaleb
- Department of Chemical Engineering, College of Engineering, Jazan University, 45142, Jazan, Saudi Arabia.
| | - Lakhveer Singh
- Department of Chemistry, Sardar Patel University, Mandi, Himachal Pradesh 175001, India; Department of Civil Engineering, Centre for Research & Development, Chandigarh University, Mohali 140413, Punjab, India.
| |
Collapse
|
30
|
Rizwan K, Bilal M. Developments in advanced oxidation processes for removal of microplastics from aqueous matrices. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:86933-86953. [PMID: 36279055 DOI: 10.1007/s11356-022-23545-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2022] [Accepted: 10/06/2022] [Indexed: 06/16/2023]
Abstract
Continuous incorporation of microplastics (MPs) and their fragmented residues into the ecosystem has sparked significant scientific apprehensions about persistence, a multitude of sources, and toxicity impacts on human health and aquatic entities. Overcoming this multifaceted hazard necessitates the development of novel techniques with robust efficiencies to eliminate microplastics from the environmental compartments. Coagulation, flocculation, and membrane filtration are non-destructive techniques but necessitate extra steps for microplastic degradation, whereas biological means have been confirmed less efficient (less than 15% degradation). Recent reports have emphasized advanced oxidation processes (AOPs) as practical treatment alternatives, representing superior catalytic efficacy for microplastic degradation (≈30-95%). Nevertheless, additional investigations should be carried out to evaluate the performance of AOPs in degrading microplastics under real environmental matrices. Moreover, the detection of transformed metabolites, degradation mechanistic insights, and toxicity bioassays are required to substantiate AOP assumption as feasible remediation substitutes. This review focuses on the source, occurrence, discharge, transportation, and associated paramount health risks of microplastics. Advanced oxidation processes-assisted removal of microplastics from the aqueous matrices is thoroughly vetted with up-to-date findings. Factors affecting the degradation of MPs have been discussed in detail. In addition to the generalized mechanistic insights into photocatalytic degradation, the risk assessment of aging intermediates is also comprehended. Finally, the review was concluded by emphasizing current research gaps and incoming research tendencies to provide guidelines for efficiently addressing microplastic pollution.
Collapse
Affiliation(s)
- Komal Rizwan
- Department of Chemistry, University of Sahiwal, Sahiwal, 57000, Pakistan.
| | - Muhammad Bilal
- Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Berdychowo 4, Ponzan, PL-60695, Poland
| |
Collapse
|
31
|
Wang L, Hu Z, Yin H, Bradford SA, Luo J, Hou D. Aging of colloidal contaminants and pathogens in the soil environment: Implications for nanoplastic and COVID-19 risk mitigation. SOIL USE AND MANAGEMENT 2022; 39:SUM12849. [PMID: 36711026 PMCID: PMC9874619 DOI: 10.1111/sum.12849] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/28/2022] [Revised: 10/03/2022] [Accepted: 10/05/2022] [Indexed: 06/18/2023]
Abstract
Colloidal contaminants and pathogens are widely distributed in soil, whose tiny sizes and distinct surface properties render unique environmental behaviours. Because of aging, colloids can undergo dramatic changes in their physicochemical properties once in the soil environment, thus leading to diverse or even unpredictable environmental behaviour and fate. Herein, we provide a state-of-art review of colloid aging mechanisms and characteristics and implications for risk mitigation. First, we review aging-induced formation of colloidal contaminants and aging-associated changes. We place a special focus on emerging nanoplastic (NP) contaminants and associated physical, chemical, and biological aging processes in soil environments. Second, we assess aging and survival features of colloidal pathogens, especially viruses. Viruses in soils may survive from several days to months, or even several years in groundwater, depending on their rates of inactivation and the reversibility of attachment. Furthermore, we identify implications for risk mitigation based on aging mechanisms. Hotspots of (photo)chemical aging of NPs, including plastic gauzes at construction sites and randomly discarded plastic waste in rural areas, are identified as area requiring greater research attention. For COVID-19, we suggest taking greater care in regions where viruses are persist for long periods, such as cold climate regions. Soil amendment with quicklime (CaO) may act as an effective means for pathogen disinfection. Future risk mitigation of colloidal contaminants and pathogens relies on a better understanding of aging mechanisms and more sophisticated models accurately depicting processes in real soil environments.
Collapse
Affiliation(s)
- Liuwei Wang
- School of EnvironmentTsinghua UniversityBeijingChina
| | - Zhongtao Hu
- School of EnvironmentTsinghua UniversityBeijingChina
- Faculty of ScienceThe University of MelbourneMelbourneVictoriaAustralia
| | - Hanbing Yin
- School of EnvironmentTsinghua UniversityBeijingChina
- College of Environmental Science and EngineeringBeijing Forestry UniversityBeijingChina
| | - Scott A. Bradford
- United States Department of Agriculture, Agricultural Research ServiceSustainable Agricultural Water Systems UnitDavisCaliforniaUSA
| | - Jian Luo
- School of Civil and Environmental EngineeringGeorgia Institute of TechnologyAtlantaGeorgiaUSA
| | - Deyi Hou
- School of EnvironmentTsinghua UniversityBeijingChina
| |
Collapse
|
32
|
Tursi A, Baratta M, Easton T, Chatzisymeon E, Chidichimo F, De Biase M, De Filpo G. Microplastics in aquatic systems, a comprehensive review: origination, accumulation, impact, and removal technologies. RSC Adv 2022; 12:28318-28340. [PMID: 36320515 PMCID: PMC9531539 DOI: 10.1039/d2ra04713f] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Accepted: 09/29/2022] [Indexed: 11/30/2022] Open
Abstract
Although the discovery of plastic in the last century has brought enormous benefits to daily activities, it must be said that its use produces countless environmental problems that are difficult to solve. The indiscriminate use and the increase in industrial production of cleaning, cosmetic, packaging, fertilizer, automotive, construction and pharmaceutical products have introduced tons of plastics and microplastics into the environment. The latter are of greatest concern due to their size and their omnipresence in the various environmental sectors. Today, they represent a contaminant of increasing ecotoxicological interest especially in aquatic environments due to their high stability and diffusion. In this regard, this critical review aims to describe the different sources of microplastics, emphasizing their effects in aquatic ecosystems and the danger to the health of living beings, while examining, at the same time, those few modelling studies conducted to estimate the future impact of plastic towards the marine ecosystem. Furthermore, this review summarizes the latest scientific advances related to removal techniques, evaluating their advantages and disadvantages. The final purpose is to highlight the great environmental problem that we are going to face in the coming decades, and the need to develop appropriate strategies to invert the current scenario as well as better performing removal techniques to minimize the environmental impacts of microplastics.
Collapse
Affiliation(s)
- Antonio Tursi
- Department of Chemistry and Chemical Technologies, University of Calabria Via P. Bucci, Cubo 15D, 87036 Arcavacata di Rende (CS) Italy
| | - Mariafrancesca Baratta
- Department of Chemistry and Chemical Technologies, University of Calabria Via P. Bucci, Cubo 15D, 87036 Arcavacata di Rende (CS) Italy
| | - Thomas Easton
- School of Engineering, Institute for Infrastructure and Environment, University of Edinburgh The King's Buildings Edinburgh EH9 3JL UK
| | - Efthalia Chatzisymeon
- School of Engineering, Institute for Infrastructure and Environment, University of Edinburgh The King's Buildings Edinburgh EH9 3JL UK
| | - Francesco Chidichimo
- Department of Environmental Engineering, University of Calabria Via P. Bucci, Cubo 42B, 87036 Arcavacata di Rende (CS) Italy
| | - Michele De Biase
- Department of Environmental Engineering, University of Calabria Via P. Bucci, Cubo 42B, 87036 Arcavacata di Rende (CS) Italy
| | - Giovanni De Filpo
- Department of Chemistry and Chemical Technologies, University of Calabria Via P. Bucci, Cubo 15D, 87036 Arcavacata di Rende (CS) Italy
| |
Collapse
|
33
|
Alkhadra M, Su X, Suss ME, Tian H, Guyes EN, Shocron AN, Conforti KM, de Souza JP, Kim N, Tedesco M, Khoiruddin K, Wenten IG, Santiago JG, Hatton TA, Bazant MZ. Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion. Chem Rev 2022; 122:13547-13635. [PMID: 35904408 PMCID: PMC9413246 DOI: 10.1021/acs.chemrev.1c00396] [Citation(s) in RCA: 60] [Impact Index Per Article: 30.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/06/2021] [Indexed: 02/05/2023]
Abstract
Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.
Collapse
Affiliation(s)
- Mohammad
A. Alkhadra
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| | - Xiao Su
- Department
of Chemical and Biomolecular Engineering, University of Illinois at Urbana−Champaign, Urbana, Illinois 61801, United States
| | - Matthew E. Suss
- Faculty
of Mechanical Engineering, Technion—Israel
Institute of Technology, Haifa 3200003, Israel
- Wolfson
Department of Chemical Engineering, Technion—Israel
Institute of Technology, Haifa 3200003, Israel
- Nancy
and Stephen Grand Technion Energy Program, Technion—Israel Institute of Technology, Haifa 3200003, Israel
| | - Huanhuan Tian
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| | - Eric N. Guyes
- Faculty
of Mechanical Engineering, Technion—Israel
Institute of Technology, Haifa 3200003, Israel
| | - Amit N. Shocron
- Faculty
of Mechanical Engineering, Technion—Israel
Institute of Technology, Haifa 3200003, Israel
| | - Kameron M. Conforti
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| | - J. Pedro de Souza
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| | - Nayeong Kim
- Department
of Chemical and Biomolecular Engineering, University of Illinois at Urbana−Champaign, Urbana, Illinois 61801, United States
| | - Michele Tedesco
- European
Centre of Excellence for Sustainable Water Technology, Wetsus, Oostergoweg 9, 8911 MA Leeuwarden, The Netherlands
| | - Khoiruddin Khoiruddin
- Department
of Chemical Engineering, Institut Teknologi
Bandung, Jl. Ganesha no. 10, Bandung, 40132, Indonesia
- Research
Center for Nanosciences and Nanotechnology, Institut Teknologi Bandung, Jl. Ganesha no. 10, Bandung 40132, Indonesia
| | - I Gede Wenten
- Department
of Chemical Engineering, Institut Teknologi
Bandung, Jl. Ganesha no. 10, Bandung, 40132, Indonesia
- Research
Center for Nanosciences and Nanotechnology, Institut Teknologi Bandung, Jl. Ganesha no. 10, Bandung 40132, Indonesia
| | - Juan G. Santiago
- Department
of Mechanical Engineering, Stanford University, Stanford, California 94305, United States
| | - T. Alan Hatton
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| | - Martin Z. Bazant
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
- Department
of Mathematics, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| |
Collapse
|
34
|
Chen Z, Liu X, Wei W, Chen H, Ni BJ. Removal of microplastics and nanoplastics from urban waters: Separation and degradation. WATER RESEARCH 2022; 221:118820. [PMID: 35841788 DOI: 10.1016/j.watres.2022.118820] [Citation(s) in RCA: 25] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/21/2022] [Revised: 06/30/2022] [Accepted: 07/03/2022] [Indexed: 06/15/2023]
Abstract
The omnipresent micro/nanoplastics (MPs/NPs) in urban waters arouse great public concern. To build a MP/NP-free urban water system, enormous efforts have been made to meet this goal via separating and degrading MPs/NPs in urban waters. Herein, we comprehensively review the recent developments in the separation and degradation of MPs/NPs in urban waters. Efficient MP/NP separation techniques, such as adsorption, coagulation/flocculation, flotation, filtration, and magnetic separation are first summarized. The influence of functional materials/reagents, properties of MPs/NPs, and aquatic chemistry on the separation efficiency is analyzed. Then, MP/NP degradation methods, including electrochemical degradation, advanced oxidation processes (AOPs), photodegradation, photocatalytic degradation, and biological degradation are detailed. Also, the effects of critical functional materials/organisms and operational parameters on degradation performance are discussed. At last, the current challenges and prospects in the separation, degradation, and further upcycling of MPs/NPs in urban waters are outlined. This review will potentially guide the development of next-generation technologies for MP/NP pollution control in urban waters.
Collapse
Affiliation(s)
- Zhijie Chen
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, NSW 2007, Australia
| | - Xiaoqing Liu
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, NSW 2007, Australia
| | - Wei Wei
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, NSW 2007, Australia
| | - Hong Chen
- State Environmental Protection Key Laboratory of Integrated Surface Water-Groundwater Pollution Control, Shenzhen Key Laboratory of Interfacial Science and Engineering of Materials (SKLISEM), School of Environmental Science and Engineering, Southern University of Science and Technology, Shenzhen 518055, PR China
| | - Bing-Jie Ni
- Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, NSW 2007, Australia.
| |
Collapse
|
35
|
Light-Activated Hydroxyapatite Photocatalysts: New Environmentally-Friendly Materials to Mitigate Pollutants. MINERALS 2022. [DOI: 10.3390/min12050525] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
This review focuses on a reasoned search for articles to treat contaminated water using hydroxyapatite (HAp)-based compounds. In addition, the fundamentals of heterogeneous photocatalysis were considered, combined with parameters that affect the pollutants’ degradation using hydroxyapatite-based photocatalyst design and strategies of this photocatalyst, and the challenges of and perspectives on the development of these materials. Many critical applications have been analyzed to degrade dyes, drugs, and pesticides using HAp-based photocatalysts. This systematic review highlights the recent state-of-the-art advances that enable new paths and good-quality preparations of HAp-derived photocatalysts for photocatalysis.
Collapse
|