Microplastics in house dust from 12 countries and associated human exposure

Concentrations, Profiles, and Potential Sources of Liquid Crystal Monomers in Residential Indoor Dust from the United States

Liquid crystal monomers (LCMs) are biphenyl- or cyclohexane-based organic chemicals used in electronic digital displays, and several of them possess bioaccumulative and toxic properties. Little is known about their occurrence in indoor dust from the United States. We analyzed 60 LCMs in 104 residential indoor dust samples collected from 16 states across the United States. Forty-seven of 60 LCMs were detected in dust samples at a median ∑LCM concentration of 402 ng/g (range: not detected to 4300 ng/g). Trans-4-propylcyclohexyl trans,trans-4'-propylbicyclohexyl-4-carboxylate (MPVBC) and (trans,trans)-4-fluorophenyl 4'-pentyl-[1,1'-bi(cyclohexane)]-4-carboxylate (FPeBC) were frequently detected in dust samples. We investigated potential sources of LCMs in dust by determining concentrations and profiles of these chemicals in smartphone screens, desktop and laptop computer monitors, and displays of other electronic devices and found that profiles in smartphones matched closely with those found in dust. The calculated median daily intake of ∑LCM through dust ingestion was 1.19 ng/kg bw/d for children, whereas that through dermal absorption was 0.18 ng/kg bw/d for adults in the United States.

A Comparative Study on the Interaction Between Protein and PET Micro/Nanoplastics: Structural and Surface Characteristics of Particles and Impacts on Lung Carcinoma Cells (A549) and Staphylococcus aureus

The interaction between particles and proteins is a key factor determining the toxicity responses of particles. Therefore, this study aimed to examine the interaction between the emerging pollutant polyethylene terephthalate micro/nanoplastics from water bottles with bovine serum albumin. The physicochemical characteristics of micro/nanoplastics were investigated using nuclear magnetic resonance, x-ray diffraction, Fourier transform infrared, dynamic light scattering, and x-ray energy dispersive spectroscopy after exposure to various concentrations and durations of protein. Furthermore, the impact of protein-treated micro/nanoplastics on biological activities was examined using the mitochondrial activity and membrane integrity of A549 cells and the activity and biofilm production of Staphylococcus aureus. The structural characteristics of micro/nanoplastics revealed an interaction with protein. For instance, the assignment of protein-related new proton signals (e.g., CH2, methylene protons of CH2O), changes in available protons s (e.g., CH and CH3), crystallinity, functional groups, elemental ratios, zeta potentials (-11.3 ± 1.3 to -12.4 ± 1.7 to 25.5 ± 2.3 mV), and particle size (395 ± 76 to 496 ± 60 to 866 ± 82 nm) of micro/nanoplastics were significantly observed after protein treatment. In addition, the loading (0.012-0.027 mM) and releasing (0.008-0.013 mM) of protein also showed similar responses with structural characteristics. Moreover, the cell-based responses were changed regarding the structural and surface characteristics of micro/nanoplastics and the loading efficiencies of protein. For example, insignificant mitochondrial activity (2%-10%) and significant membrane integrity (12%-28%) of A549 cells increased compared with control, and reductions in bacterial activity (5%-40%) in many cases and biofilm production specifically at low dose of all treatment stages (13%-46% reduction) were observed.

The potential of micro- and nanoplastics to exacerbate the health impacts and global burden of non-communicable diseases

Non-communicable diseases (NCD) constitute one of the highest burdens of disease globally and are associated with inflammatory responses in target organs. There is increasing evidence of significant human exposure to micro- and nanoplastics (MnPs). This review of environmental MnP exposure and health impacts indicates that MnP particles, directly and indirectly through their leachates, may exacerbate inflammation. Meanwhile, persistent inflammation associated with NCDs in gastrointestinal and respiratory systems potentially increases MnP uptake, thus influencing MnP access to distal organs. Consequently, a future increase in MnP exposure potentially augments the risk and severity of NCDs. There is a critical need for an integrated one-health approach to human health and environmental research for assessing the drivers of human MnP exposure and their bidirectional links with NCDs. Assessing these risks requires interdisciplinary efforts to identify and link drivers of environmental MnP exposure and organismal uptake to studies of impacted disease mechanisms and health outcomes.

Lung microbiota participated in fibrous microplastics (MPs) aggravating OVA-induced asthma disease in mice

Environmental pollution is one of the risk factors for asthma. Currently, whether micro-plastics could aggravate asthma, is still unclear. In the air, fibrous MPs are the predominant shape. Since fibrous micro-plastics are reported to be detected in the lower respiratory tract and other body parts, the relationship of fibrous MP and asthma, as well as the potential mechanism is not well investigated. In this study, we produced fibrous MPs, whose lengths and widths were in accordance with the natural environment, and further, investigated the potential adverse effect of which on the asthma in a OVA (ovalbumin)-induced mice model, aiming at exploring the true life hazard of MP to the respiratory system. Following nasal exposure to fibrous MPs, the airway inflammation, mucus hypersecretion and fibrosis were aggravated in asthmatic mice. Fibrous MPs exposure also significantly increased the levels of total IgE, and, cardinal Th2 and Th1 pro-inflammatory cytokines participated in the etiopathogenesis of allergic airway inflammation. In addition, MP fibers exposure induced lung epithelial cells apoptosis, disruption of epithelial barrier integrity and activation of NLRP3 related signaling pathways. Moreover, fibrous MPs significantly altered the bacterial composition at the genus level. Compared to the control group, the relative abundance of Escherichia-Shigella and Uncultured were decreased to 4.47% and 0.15% in OVA group, while Blautia and Prevotella were elevated to 4.96% and 2.94%. For the OVA + MPs group, the relative abundance of Blautia and Uncultured were decreased to 2.27% and 0.006%, while Prevotella was increased to 3.05%. Our study highlights the detrimental effect of fibrous MPs on asthmatic population and facilitates an indication of the latent mechanisms of fibrous MPs induced airway pathology.

Microplastics suspended in dust from different indoor environments in Barranquilla, Colombia: Predominant microparticles?

Considering that microplastics (MPs) are classified as ubiquitous pollutants, that air quality affects human health, and that people remain indoors most of the time, the need has arisen to evaluate the exposure to MPs within the suspended dust in indoor environments. With this objective, the present study carried out passive sampling to analyze the precipitation of microparticles in some indoor residential environments (2 apartments) and workplaces (an office, a pastry shop, a gift shop, and a paint shop) in Barranquilla, Colombia. The quantification and physical characterization of microparticles were carried out under a stereomicroscope, and the chemical characterization was carried out by infrared microspectroscopy (μFTIR). The highest average concentration of MPs in the apartments was found in the air-conditioned rooms (1.1 × 104 MP/m2/day), and concerning the workplaces, the gift shop and the paint shop were the spaces with a higher proportion of MPs (6.0-6.1 × 103 MP/m2/day), with polyesters being the main synthetic polymers, but being semi-synthetic particles the predominant among the samples. Regarding its morphology, fibers were the most abundant shape (>90%), grouping mainly in the 1000-5000 μm range, while the few fragments found were mostly grouped below 50 μm. Exposure by inhalation of MPs in adults was estimated between 1.7 × 102-1.6 × 103 MP/kg/day, while by ingestion it ranged between 2.7 × 102-2.4 × 103 MPs/kg/day. On the other hand, within our research, a significant presence of non-plastic microparticles was found, which reached up to 69% in analyzed samples, corresponding mainly to cotton and cellulose, so we suggest that these should also be included in future studies that aim to estimate potential health implications from exposure to suspended micropollutants.

Probabilistic Estimation of Airborne Micro- and Nanoplastic Intake in Humans

Little research exists on the magnitude, variability, and uncertainty of human exposure to airborne micro- and nanoplastics (AMNPs), despite their critical role in human exposure to MNPs. We probabilistically estimate the global intake of AMNPs through three main pathways: indoor inhalation, outdoor inhalation, and ingestion during indoor meals, for both children and adults. The median inhalation of AMPs is 1,207.7 (90% CI, 42.5-8.48 × 104) and 1,354.7 (90% CI, 47.4-9.55 × 104) N/capita/day for children and adults, respectively. The annual intake of AMPs is 13.18 mg/capita/a for children and 19.10 mg/capita/a for adults, which is approximately one-fifth and one-third of the mass of a standard stamp, assuming a consistent daily intake of medians. The majority of AMP number intake occurs through inhalation, while the ingestion of deposited AMPs during meals contributes the most in terms of mass. Furthermore, the median ANP intake through outdoor inhalation is 9,638.1 N/day (8.23 × 10-6 μg/d) and 5,410.6 N/day (4.62 × 10-6 μg/d) for children and adults, respectively, compared to 5.30 × 105 N/day (5.79 × 10-4 μg/d) and 6.00 × 105 N/day (6.55 × 10-4 μg/d) via indoor inhalation. Considering the increased toxicity of smaller MNPs, the significant number of ANPs inhaled warrants great attention. Collaborative efforts are imperative to further elucidate and combat the current MPN risks.

Microplastics: Omnipresent and an ongoing challenge for medical science

Micro- and nanoplastics are omnipresent not only in the environment, but have also been detected in human body fluids and tissue. The subsequent commentary provides a perspective about potential risks for human health as well as resulting challenges for medical science.

Isolation and identification of microplastics in infant formulas - A potential health risk for children

Microplastics (MPs) are plastic particles between 0.1 and 5,000 µm in size that can contaminate food. Unfortunately, to date, little attention has been paid to analyzing the presence of such particles in baby foods. The present study aimed to determine the degree of contamination of infant formula with MPs. A total of thirty products were subjected to analysis. The research methodology used included the isolation of plastic particles, identification and characterization of MPs using advanced microscopic and spectroscopic techniques. Microplastics were detected in all tested samples. The most frequently identified polymers were polyamide, polyethylene, polypropylene, and poly(ethylene terephthalate). The particles exhibited diverse forms, including fibers, fragments, and films, displaying a range of colors such as colorless, black, and brown particles. Furthermore, the daily intake of MPs by children fed exclusively infant formula was estimated to be approximately 49 ± 32 MPs. This poses a potential health risk for the youngest.

Microplastics dysregulate innate immunity in the SARS-CoV-2 infected lung

Introduction

Global microplastic (MP) pollution is now well recognized, with humans and animals consuming and inhaling MPs on a daily basis, with a growing body of concern surrounding the potential impacts on human health.

Methods

Using a mouse model of mild COVID-19, we describe herein the effects of azide-free 1 μm polystyrene MP beads, co-delivered into lungs with a SARS-CoV-2 omicron BA.5 inoculum. The effect of MPs on the host response to SARS-CoV-2 infection was analysed using histopathology and RNA-Seq at 2 and 6 days post-infection (dpi).

Results

Although infection reduced clearance of MPs from the lung, virus titres and viral RNA levels were not significantly affected by MPs, and overt MP-associated clinical or histopathological changes were not observed. However, RNA-Seq of infected lungs revealed that MP exposure suppressed innate immune responses at 2 dpi and increased pro-inflammatory signatures at 6 dpi. The cytokine profile at 6 dpi showed a significant correlation with the 'cytokine release syndrome' signature observed in some COVID-19 patients.

Discussion

The findings are consistent with the recent finding that MPs can inhibit phagocytosis of apoptotic cells via binding of Tim4. They also add to a growing body of literature suggesting that MPs can dysregulate inflammatory processes in specific disease settings.

Inhalation of Microplastics-A Toxicological Complexity

Humans are chronically exposed to airborne microplastics (MPs) by inhalation. Various types of polymer particles have been detected in lung samples, which could pose a threat to human health. Inhalation toxicological studies are crucial for assessing the effects of airborne MPs and for exposure-reduction measures. This communication paper addresses important health concerns related to MPs, taking into consideration three levels of complexity, i.e., the particles themselves, the additives present in the plastics, and the exogenous substances adsorbed onto them. This approach aims to obtain a comprehensive toxicological profile of deposited MPs in the lungs, encompassing local and systemic effects. The physicochemical characteristics of MPs may play a pivotal role in lung toxicity. Although evidence suggests toxic effects of MPs in animal and cell models, no established causal link with pulmonary or systemic diseases in humans has been established. The transfer of MPs and associated chemicals from the lungs into the bloodstream and/or pulmonary circulation remains to be confirmed in humans. Understanding the toxicity of MPs requires a multidisciplinary investigation using a One Health approach.

ROS-dependent degeneration of human neurons induced by environmentally relevant levels of micro- and nanoplastics of diverse shapes and forms

Our study explores the pressing issue of micro- and nanoplastics (MNPs) inhalation and their subsequent penetration into the brain, highlighting a significant environmental health concern. We demonstrate that MNPs can indeed penetrate murine brain, warranting further investigation into their neurotoxic effects in humans. We then proceed to test the impact of MNPs at environmentally relevant concentrations, with focusing on variations in size and shape. Our findings reveal that these MNPs induce oxidative stress, cytotoxicity, and neurodegeneration in human neurons, with cortical neurons being more susceptible than nociceptors. Furthermore, we examine the role of biofilms on MNPs, demonstrating that MNPs can serve as a vehicle for pathogenic biofilms that significantly exacerbate these neurotoxic effects. This sequence of investigations reveals that minimal MNPs accumulation can cause oxidative stress and neurodegeneration in human neurons, significantly risking brain health and highlights the need to understand the neurological consequences of inhaling MNPs. Overall, our developed in vitro testing battery has significance in elucidating the effects of environmental factors and their associated pathological mechanisms in human neurons.

A critical review on male-female reproductive and developmental toxicity induced by micro-plastics and nano-plastics through different signaling pathways

It is widely accepted that humans are constantly exposed to micro-plastics and nano-plastics through various routes, including inhalation of airborne particles, exposure to dust, and consumption of food and water. It is estimated that humans may consume thousand to millions of micro-plastic particles, equating to several milligrams per day. Prolonged exposure to micro-plastics and nano-plastics has been linked to negative effects on different living organisms, including neurotoxicity, gastrointestinal toxicity, nephrotoxicity, and hepatotoxicity, and developmental toxicities. The main purpose of this review is to explore the effect of micro-plastics and nano-plastics on the male and female reproductive system, as well as their offspring, and the associated mechanism implicated in the reproductive and developmental toxicities. Micro-plastics and nano-plastics have been shown to exert negative effects on the reproductive system of both male and female mammals and aquatic animals, including developmental impacts on gonads, gametes, embryo, and their subsequent generation. In addition, micro-plastics and nano-plastics impact the hypothalamic-pituitary axes, leading to oxidative stress, reproductive toxicity, neurotoxicity, cytotoxicity, developmental abnormalities, poor sperm quality, diminishes ovarian ovulation and immune toxicity. This study discusses the so many different signaling pathways associated in the male and female reproductive and developmental toxicity induced by micro-plastics and nano-plastics.

Potential Effects of Environmental and Occupational Exposure to Microplastics: An Overview of Air Contamination

Microplastics (MPs) are now ubiquitous environmental contaminants that lead to unavoidable human exposure; they have received increasing attention in recent years and have become an emerging area of research. The greatest concern is the negative impacts of MPs on marine, fresh-water, and terrestrial ecosystems, as well as human health, to the extent that the World Health Organization (WHO) calls for increased research and standardized methods to assess exposure to MPs. Many countries and international organizations are implementing or proposing legislation in this regard. This review aims to summarize the current state of legislation, indoor and outdoor contamination, and potential human health risk due to exposure to airborne MPs, considering that occupational exposure to MPs is also becoming a growing area of concern. Even though research regarding MPs has continuously increased in the last twenty years, the effects of MPs on human health have been scarcely investigated, and toxicity studies are still limited and not directly comparable, due to the lack of standardized studies in this field.

Assessment of human dermal absorption of flame retardant additives in polyethylene and polypropylene microplastics using 3D human skin equivalent models

To overcome ethical and technical challenges impeding the study of human dermal uptake of chemical additives present in microplastics (MPs), we employed 3D human skin equivalent (3D-HSE) models to provide first insights into the dermal bioavailability of polybrominated diphenyl ether (PBDEs) present in MPs; and evaluated different factors influencing human percutaneous absorption of PBDEs under real-life exposure scenario. PBDEs were bioavailable to varying degrees (up to 8 % of the exposure dose) and percutaneous permeation was evident, albeit at low levels (≤0.1 % of the exposure dose). While the polymer type influenced the release of PBDEs from the studied MPs to the skin, the polymer type was less important in driving the percutaneous absorption of PBDEs. The absorbed fraction of PBDEs was strongly correlated (r2 = 0.88) with their water solubility, while the dermal permeation coefficient Papp of PBDEs showed strong association with their molecular weight and logKOW. More sweaty skin resulted in higher bioavailability of PBDEs from dermal contact with MPs than dry skin. Overall, percutaneous absorption of PBDEs upon skin contact with MPs was evident, highlighting, for the first time, the potential significance of the dermal pathway as an important route of human exposure to toxic additive chemicals in MPs.

Micro- and nano-plastics in the atmosphere: A review of occurrence, properties and human health risks

The ubiquitous occurrence of micro/nano plastics (MNPs) poses potential threats to ecosystem and human health that have attracted broad concerns in recent decades. Detection of MNPs in several remote regions has implicated atmospheric transport as an important pathway for global dissemination of MNPs and hence as a global health risk. In this review, the latest research progress on (1) sampling and detection; (2) origin and characteristics; and (3) transport and fate of atmospheric MNPs was summarized. Further, the current status of exposure risks and toxicological effects from inhaled atmospheric MNPs on human health is examined. Due to limitations in sampling and identification methodologies, the study of atmospheric nanoplastics is very limited today. The large spatial variation of atmospheric MNP concentrations reported worldwide makes it difficult to compare the overall indoor and outdoor exposure risks. Several in vitro, in vivo, and epidemiological studies demonstrate adverse effects of immune response, apoptosis and oxidative stress caused by MNP inhalation that may induce cardiovascular diseases and reproductive and developmental abnormalities. Given the emerging importance of atmospheric MNPs, the establishment of standardized sampling-pretreatment-detection protocols and comprehensive toxicological studies are critical to advance environmental and health risk assessments of atmospheric MNPs.

Underestimated activity-based microplastic intake under scenario-specific exposures

Despite increasing alarms over the health impacts of microplastics (MPs) due to their detection in human organs and feces, precise exposure evaluations remain scarce. To comprehend their risks, there is a distinct need to prioritize quantitive estimates in MP exposome, particularly at the environmentally-realistic level. Here we used a method rooted in real-world MP measurements and activity patterns to determine the daily intake of MPs through inhalation and from ground dust/soil ingestion. We found that nearly 80% of this intake comes from residential sectors, with activity intensity and behavioral types significantly affecting the human MP burden. The data showed a peak in MP exposure for those aged 18-64. When compared to dietary MP intake sources like seafood, salt, and water, we identified a previously underestimated exposure from inhalation and dust/soil ingestion, emphasizing the need for more realistic evaluations that incorporate activity factors. This discovery raises questions about the accuracy of past studies and underscores MP's potential health risks. Moreover, our time-based simulations revealed increased MP intake during the COVID-19 lockdown due to more surface dust ingestion, shedding light on how global health crises may inadvertently elevate MP exposure risks.

Inhalable Textile Microplastic Fibers Impair Airway Epithelial Differentiation

Rationale: Microplastics are a pressing global concern, and inhalation of microplastic fibers has been associated with interstitial and bronchial inflammation in flock workers. However, how microplastic fibers affect the lungs is unknown. Objectives: Our aim was to assess the effects of 12 × 31 μm nylon 6,6 (nylon) and 15 × 52 μm polyethylene terephthalate (polyester) textile microplastic fibers on lung epithelial growth and differentiation. Methods: We used human and murine alveolar and airway-type organoids as well as air-liquid interface cultures derived from primary lung epithelial progenitor cells and incubated these with either nylon or polyester fibers or nylon leachate. In addition, mice received one dose of nylon fibers or nylon leachate, and, 7 days later, organoid-forming capacity of isolated epithelial cells was investigated. Measurements and Main Results: We observed that nylon microfibers, more than polyester, inhibited developing airway organoids and not established ones. This effect was mediated by components leaching from nylon. Epithelial cells isolated from mice exposed to nylon fibers or leachate also formed fewer airway organoids, suggesting long-lasting effects of nylon components on epithelial cells. Part of these effects was recapitulated in human air-liquid interface cultures. Transcriptomic analysis revealed upregulation of Hoxa5 after exposure to nylon fibers. Inhibiting Hoxa5 during nylon exposure restored airway organoid formation, confirming Hoxa5's pivotal role in the effects of nylon. Conclusions: These results suggest that components leaching from nylon 6,6 may especially harm developing airways and/or airways undergoing repair, and we strongly encourage characterization in more detail of both the hazard of and the exposure to microplastic fibers.

Microplastics as carriers of toxic pollutants: Source, transport, and toxicological effects

Microplastic pollution has emerged as a new environmental concern due to our reliance on plastic. Recent years have seen an upward trend in scholarly interest in the topic of microplastics carrying contaminants; however, the available review studies have largely focused on specific aspects of this issue, such as sorption, transport, and toxicological effects. Consequently, this review synthesizes the state-of-the-art knowledge on these topics by presenting key findings to guide better policy action toward microplastic management. Microplastics have been reported to absorb pollutants such as persistent organic pollutants, heavy metals, and antibiotics, leading to their bioaccumulation in marine and terrestrial ecosystems. Hydrophobic interactions are found to be the predominant sorption mechanism, especially for organic pollutants, although electrostatic forces, van der Waals forces, hydrogen bonding, and pi-pi interactions are also noteworthy. This review reveals that physicochemical properties of microplastics, such as size, structure, and functional groups, and environmental compartment properties, such as pH, temperature, and salinity, influence the sorption of pollutants by microplastic. It has been found that microplastics influence the growth and metabolism of organisms. Inadequate methods for collection and analysis of environmental samples, lack of replication of real-world settings in laboratories, and a lack of understanding of the sorption mechanism and toxicity of microplastics impede current microplastic research. Therefore, future research should focus on filling in these knowledge gaps.

Characterising microplastics in indoor air: Insights from Raman imaging analysis of air filter samples

We are directly exposed to microplastic contamination via indoor air that we breathe daily, for which the characterisation of microplastics is still a challenge. Herein, two typical air filter samples were collected, one from an air-conditioner and another from a personal computer, both of which have been working for around half a year to collect and accumulate microplastics in the indoor air, like microplastic banks. After the sample preparation to remove the mineral dusts, Raman imaging was employed to directly and simultaneously identify and visualise microplastics of polyethylene terephthalate (PET) fibres, distinguish them from other fibres such as cellulose and cross-check them with a scanning electron microscope (SEM). To count the microplastics and to avoid the quantification bias, several areas were randomly scanned and imaged to statistically estimate the percentage of microplastic fibres in the analysed samples. The microplastics amount, which has been estimated at 73-88,000 fibers per filter per half a year, varies and depends on the indoor environment so that the air filter can work as a good indicator to monitor the quality of the indoor air from the microplastic perspective. Overall, human are directly exposed to this emerging contamination every day, raising environmental concerns. Raman imaging characterisation and its corresponding statistical information can help pursue further research on microplastics.

From celebration to contamination: Analysing microplastics released by burst balloons

Air balloons are a ubiquitous presence in our daily lives, and their rupture may release a substantial quantity of debris, as investigated herein. We employ Raman imaging to capture the fragments resulting from balloon explosions, enabling the identification and direct visualisation of minute microplastic particles / fragments with an improved signal-to-noise ratio for precise quantification. To circumvent the generation of misleading confocal Raman images, we recommend employing terrain mapping to scan the three-dimensional surface of the sample. It is important to acknowledge that the analysis of microplastics at the micro-scale inherently poses limitations in terms of throughput, as it necessitates a trade-off between low and high magnifications. We conduct explosive experiments on ten-to-hundred balloons, collecting debris from various angles and positions. Our investigation involves the random testing of multiple samples / sample positions at the micro-scale, with subsequent extrapolation to estimate the total amount of microplastics. The amalgamation of these results through statistical analysis indicates that each balloon explosion can potentially release tens-to-thousands of microplastics, highlighting a concern that has hitherto received insufficient attention. The characterisation approach, particularly the random Raman scanning method in combination with SEM and the statistical analysis on accumulated samples employed in this report, has the potential to serve as a useful tool in future research on microplastics and even nanoplastics.

Size-Resolved Identification and Quantification of Micro/Nanoplastics in Indoor Air Using Pyrolysis Gas Chromatography-Ion Mobility Mass Spectrometry

Humans are exposed to differing levels of micro/nanoplastics (MNPs) through inhalation, but few studies have attempted to measure <1 μm MNPs in air, in part due to a paucity of analytical methods. We developed an approach to identify and quantify MNPs in indoor air using a novel pyrolysis gas chromatographic cyclic ion mobility mass spectrometer (pyr-GCxcIMS). Four common plastic types were targeted for identification, namely, (polystyrene (PS), polyethylene (PE), polypropylene (PP), and polymethyl methacrylate (PMMA). The method was applied to size-resolved particulate (56 nm to 18 μm) collected from two different indoor environments using a Micro-Orifice Uniform Deposit Impactors (MOUDI) model 110 cascade impactor. Comprehensive two-dimensional separation by GCxcIMS also enabled the retrospective analysis of other polymers and plastic additives. The mean concentrations of MNP particles with diameters of <10 μm and <2.5 μm in the laboratory were estimated to be 47 ± 5 and 27 ± 4 μg/m3, respectively. In the private residence, the estimated concentrations were 24 ± 3 and 16 ± 2 μg/m3. PS was the most abundant MNP type in both locations. Nontargeted screening revealed the presence of plastic additives, such as TDCPP (tris(1,3-dichloro-2-propyl)phosphate) whose abundance correlated with that of polyurethane (PU). This is consistent with their use as flame retardants in PU-based upholstered furniture and building insulation. This study provides evidence of indoor exposure to MNPs and underlines the need for further study of this route of exposure to MNPs and the plastic additives carried with them.

Micro(nano)plastics in the Human Body: Sources, Occurrences, Fates, and Health Risks

The increasing global attention on micro(nano)plastics (MNPs) is a result of their ubiquity in the water, air, soil, and biosphere, exposing humans to MNPs on a daily basis and threatening human health. However, crucial data on MNPs in the human body, including the sources, occurrences, behaviors, and health risks, are limited, which greatly impedes any systematic assessment of their impact on the human body. To further understand the effects of MNPs on the human body, we must identify existing knowledge gaps that need to be immediately addressed and provide potential solutions to these issues. Herein, we examined the current literature on the sources, occurrences, and behaviors of MNPs in the human body as well as their potential health risks. Furthermore, we identified key knowledge gaps that must be resolved to comprehensively assess the effects of MNPs on human health. Additionally, we addressed that the complexity of MNPs and the lack of efficient analytical methods are the main barriers impeding current investigations on MNPs in the human body, necessitating the development of a standard and unified analytical method. Finally, we highlighted the need for interdisciplinary studies from environmental, biological, medical, chemical, computer, and material scientists to fill these knowledge gaps and drive further research. Considering the inevitability and daily occurrence of human exposure to MNPs, more studies are urgently required to enhance our understanding of their potential negative effects on human health.

Exposure to phagolysosomal simulated fluid altered the cytotoxicity of PET micro(nano)plastics to human lung epithelial cells

The occurrence of micro(nano)plastics into various environmental and biological settings influences their physicochemical and toxic behavior. Simulated body fluids are appropriate media for understanding the degradation, stability, and interaction with other substances of any material in the human body. When the particles enter the human body via inhalation, which is one of the avenues for micro(nano)plastics, they first come into contact with the lung lining fluid under neutral conditions and then are phagocytosed under acidic conditions to be removed. Therefore, it is important to examine the physicochemical transformation and toxicity characteristics after interaction with phagolysosomal simulant fluid (PSF). Here, we focused on exploring how the physicochemical differences (e.g. surface chemistry, elemental distribution, and surface charge) of micro(nano)plastics under pH 4.5 phagolysosome conditions impact cytotoxicity and the oxidative characteristics of lung epithelia cells. The cytotoxicity of lung epithelia cells to those treated with PSF and non-treated micro(nano)plastics was tested by various viability indicators including cell counting kit-8 (CCK-8), MTT, and LDH. Furthermore, the cytotoxicity background was examined through the oxidative processes (e.g. reactive oxygen species, antioxidant, superoxide dismutase (SOD), catalase, and reduced glutathione). The results showed that all tested surface physicochemical characteristics were significantly influenced by the phagolysosome conditions. The staged responses were observed with the treatment duration, and significant changes were calculated in carbonyl, carbon-nitrogen, and sulfonyl groups. Moreover, the negativity of the zeta potentials declined between exposure of 2-40 h and then increased at 80 h compared to control owing to the chemical functional groups and elemental distribution of the plastic particles. The tested viability indicators showed that the micro(nano)plastics treated with PSF were cytotoxic to the lung epithelia cells compared to non-treated micro(nano)plastics, and SOD was the dominant enzyme triggering cytotoxicity due to the particle degradation and instability.

Nanoplastics induce neuroexcitatory symptoms in zebrafish (Danio rerio) larvae through a manner contrary to Parkinsonian's way in proteomics

Although nanoplastics (NPs) can penetrate the blood-brain barrier and accumulate in the brain, the neurotoxicity of these particles and the mechanisms associated with their unique physio-chemical properties have yet to be sufficiently ascertained. In this study, we assessed the neuroexcitatory symptoms of zebrafish (Danio rerio) larvae treated with polystyrene (PS) NPs based on an examination of locomotory behaviour, dopamine levels, and acetylcholinesterase activity. We found that PS NPs caused oxidative stress and inhibited atoh1a expression in the cerebellum of Tg(atoh1a:dTomato) transgenic zebrafish larvae, thereby indicating damage to the central nervous system. In contrast to the Parkinson's disease (PD) like effects induced by most types of nanoparticles, such as graphene oxide, we established that PS NPs influenced the neuronal proteomic profiles of zebrafish larvae in a manner contrary to the molecular pathways characteristic of PD-like effects, which could be explained by the molecular dynamic simulation. Unlike graphene oxide nanoparticles that promote significant change in the internal structure of neuroproteins, the complex macromolecular polymers of PS NPs promoted the coalescence and increased expression of neuroproteins, thereby plausibly contributing to the neuroexcitatory symptoms observed in treated zebrafish larvae. Consequently, compared with traditional nanoparticles, we believe that the unique physio-chemical properties of NPs could be a potential factor contributing to their toxicity.

Microplastic contamination in water and sediments of Mahanadi River, India: An assessment of ecological risk along rural-urban area

Worldwide, environmental concerns about MPs pollution have increased. Microplastic contamination that pollutes the ocean is mostly caused by terrestrial transfer from close proximity locations. A study of MPs pollution near coastal locations becomes necessary to address the MPs transit, fate, and mitigation. In the current study MPs pollution in the surface water and sediment of the Mahanadi River estuary was assessed during Pre-MS and MS. The size, shape, and colour of the MPs were determined using a stereomicroscope, and the MPs polymer composition was identified by Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectroscopy. The mean concentration of MPs that were potentially discovered in water was 16.6 ± 5.2 and sediments 197.3 ± 5.4 during Pre-MS. In the MS observed mean abundance of MPs was 15.1 ± 5.4 in water and 164.6 ± 76.9 in sediments. The highest abundant size was smaller than 1 mm; the most prevalent shape were fibers followed by film and fragments; black and white was a prominent colour in water and sediments respectively. Polyesters (PEs), polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), polyamide (PA), Polystyrene (PS), and Polycarbonates (PC) were found in the analysis of the chemical composition of MPs in water and sediments samples. The calculated PLI value shows pollution load at category I, with polymer hazard levels at categories III, IV, and V, indicating very high risk. The current research results show that river inflows and fishing-related actions are probably the main causes of MPs pollution.

A characterization and an exposure risk assessment of microplastics in settled house floor dust in Istanbul, Turkey

The presence of microplastics in the indoor environment presents growing environmental and human health risks because of their physicochemical and toxic characteristics. Therefore, we aimed to isolate, identify, and characterize plastic debris in settled house floor dusts. This study is a rare study which assess the risks of plastic debris in settled house dust through multiple approaches including the estimated daily intake, pollution loading index, and polymer hazard index. The results indicated that polyethylene and polypropylene were the predominate polymer type of plastic debris in settled house dust with various shapes and colors. The risk assessment results also indicated the serious impact of microplastics in terms of extremely dangerous contamination as well as the fact that they present a polymer hazard. Results indicated that humans have a higher risk of exposure to microplastics via ingestion rather than inhalation. In addition, infants had a higher risk of potential intake compared to other age groups.

Indoor microplastics: a comprehensive review and bibliometric analysis

Indoor microplastic (MP) pollution is becoming a worldwide issue because people spend more time inside. Through dust and air, indoor MP pollution may harm human health. This review summarizes recent advancements in indoor MP research, covering pretreatments, quality control, filter membranes, and identification methods. Additionally, it conducts bibliometric analysis to examine the usage of keywords, publication records, and authors' contributions to the field. Comparatively, dust and deposition samples exhibit higher MP concentrations than indoor air samples. Fiber-shaped MPs are commonly detected indoors. The color and types of MPs display variability, with polypropylene, polyethylene, polyethylene terephthalate, and polystyrene identified as the dominant MPs. Indoor environments generally demonstrate higher concentrations of MPs than outdoor environments, and MPs in the lower size range (1-100 µm) are typically more abundant. Among the reviewed articles, 45.24% conducted pretreatment on their samples, while 16.67% did not undergo any pretreatment. The predominant filter utilized in most studies was the Whatman Glass microfiber filter (41.67%), and MPs were predominantly characterized using µ-FTIR (19.23%). In the literature, 17 papers used blank samples, and eight did not. Blank findings were not included in most research (23 articles). A significant increase in published articles has been observed since 2020, with an annual growth rate exceeding 10%. The keyword microplastics had the highest frequency, followed by fibers. This indoor MP study emphasizes the need for collaborative research, policymaking, and stakeholder involvement to reduce indoor MP pollution. As indoor MP research grows, so are opportunities to identify and minimize environmental and health impacts.

A systematic review of the impacts of exposure to micro- and nano-plastics on human tissue accumulation and health

Micro- and nano-plastics (MNPs) pollution has become a pressing global environmental issue, with growing concerns regarding its impact on human health. However, evidence on the effects of MNPs on human health remains limited. This paper reviews the three routes of human exposure to MNPs, which include ingestion, inhalation, and dermal contact. It further discusses the potential routes of translocation of MNPs in human lungs, intestines, and skin, analyses the potential impact of MNPs on the homeostasis of human organ systems, and provides an outlook on future research priorities for MNPs in human health. There is growing evidence that MNPs are present in human tissues or fluids. Lab studies, including in vivo animal models and in vitro human-derived cell cultures, revealed that MNPs exposure could negatively affect human health. MNPs exposure could cause oxidative stress, cytotoxicity, disruption of internal barriers like the intestinal, the air-blood and the placental barrier, tissue damage, as well as immune homeostasis imbalance, endocrine disruption, and reproductive and developmental toxicity. Limitedly available epidemiological studies suggest that disorders like lung nodules, asthma, and blood thrombus might be caused or exacerbated by MNPs exposure. However, direct evidence for the effects of MNPs on human health is still scarce, and future research in this area is needed to provide quantitative support for assessing the risk of MNPs to human health.

Microplastics in environment: a comprehension on sources, analytical detection, health concerns, and remediation

Contamination of ecosystems by microplastics (MPs) has been reported intensively worldwide in the recent decade. A trend of reports indicated their presence in the atmosphere; food items and soil ecosystems are rising continuously. Literature evidenced that MPs are abundant in seawater, beach sand, drinking water, agricultural soils, wastewater treatment plant (WWTP) effluent, and the atmosphere. The greater abundance of MPs in the environment has led to their invasion of seafood, human-consumed food items such as table salts, beverages, takeout food containers, and disposable cups, marine biological lives, and creating serious health hazards in humans. Moreover, the absence of guidelines and specifications for controlling MPs in the environment makes the situation alarming, and the human toxicity data of MPs is scarce. Thereby, the toxicity assessment of MPs in humans is of greater concern. This review compiles the updated information on the potential sources of MPs in different components of the environment (viz. soil, water, and air), their analysis methods, effects on human health, and remediation methods.

Development of a solubility parameter calculation-based method as a complementary tool to traditional techniques for indoor dust microplastic determination and risk assessment

Herein, a method based on solubility parameter calculation was first used to analyze microplastics in indoor dust. The limit of quantification (LOQ) reached 0.2 mg/g, and the result of reference material SRM 2585 (n = 3) was 14.8 mg/g ± 1.8 %, suggesting satisfying sensitivity and precision. Recoveries of spiking experiments were > 80 % with no obvious matrix interferences observed, except ethylene propylene diene monomer (EPDM) MPs. Further, 69 indoor dust samples were analyzed to verify the method and to assess exposure scenarios for graduate students in Tianjin, China. EPDM was identified in an indoor environment for the first time as the second most widely detected type after PET in this work. The mass-based result is complementary to the outcomes from thermogravimetric analysis-gas chromatography-mass spectrometry and laser direct infrared imaging. Significant correlations were found between total organic carbon (TOC), microplastics, and BDE-209 concentrations, indicating microplastics important contaminant vectors in indoor dust. Dormitory stays and PET contributed the most to health risks among the three exposure scenarios and detected four polymers, respectively. This work provides an approach with the potential for the standardized determination of microplastics in complex environmental matrices and reveals exposure characteristics of indoor dust microplastics.

Source apportionment of microplastics in indoor dust: Two strategies based on shape and composition

Microplastic (MP) pollution is widely distributed in the environment. However, methods for source apportionment of MPs are still lacking. In this study, the shape and size of 102,860 MPs in indoor dust from 39 cities of China were analyzed by laser direct infrared, and accordingly, a shape index (fshape) based on MP's aspect ratio was developed to assess the contribution of textiles release. In addition, a composition index (fcomp) based on the ratio of the mass concentration of polyethylene terephthalate (PET) to polyamide (PA), which were detected by liquid chromatography-tandem mass spectrometry, was proposed. The contribution of textile source and non-textile source to the indoor MPs were also estimated based on fcomp. It is estimated by fshape that 43% of MPs in indoor dust was released from textiles. Among the most abundant MPs in indoor dust, 98% of polyurethane, 94% of PA and 92% of PET come from the textile source, 76% of polypropylene and almost all of polyethylene come from the non-textile source. fcomp indicates that 83% of PET MPs comes from textile source, i.e., polyester. Considering the application proportion of PET in textile and non-textile industry, it is estimated that 59% of MPs in indoor dust comes from textile source, which is similar to the result obtained by fshape.

Microplastics: Human exposure assessment through air, water, and food

BACKGROUND

Microplastics (MP) are plastic particles with dimension up to 5 mm. Due to their persistence, global spread across different ecosystems and potential human health effects, they have gained increasing attention during the last decade. However, the extent of human exposure to MP through different pathways and their intake have not been elucidated.

OBJECTIVES

The objective of this review is to provide an overview on the pathways of exposure to MP through inhalation, ingestion, and dermal contact considering data from the open bibliography on MP in air, dust, food, water and drinks.

METHODS

A bibliographic search on Scopus and PubMed was conducted using keywords on MP in outdoor and indoor air, indoor dust, food including beverages and water and human intake (n = 521). Articles were sorted by their title and abstract (n = 213), and only studies reporting MP identification and quantification techniques were further considered (n = 168). A total of 115 articles that include quality assurance and quality control (QA/QC) procedures are finally discussed in the present review. Based on MP concentration data available in literature, we estimated the potential inhaled dose (ID), dust intake (DI), the estimated daily intake (EDI) via food and beverages. Finally, the total daily intake (TDI) considering both inhalation and ingestion routes are provided for adults, infants and newborns.

RESULTS

The concentrations of MP in outdoor and indoor air, dust, and in food and water are provided according to the bibliography. Human exposure to MP through dust ingestion, inhalation of air and food/drinks consumption revealed that indoor air and drinking waters were the main sources of MP.

CONCLUSIONS

This study reveals that humans are constantly exposed to MP, and that the indoor environment and the food and water we ingest decisively contribute to MP intake. Additionally, we highlight that infants and newborns are exposed to high MP concentrations and further studies are needed to evaluate the presence and risk of MP in this vulnerable age-population.

Novel Insights into the Dermal Bioaccessibility and Human Exposure to Brominated Flame Retardant Additives in Microplastics

In this study, we optimized and applied an in vitro physiologically based extraction test to investigate the dermal bioaccessibility of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCDD), incorporated as additives in different types of microplastics (MPs), and assess human dermal exposure to these chemicals. The dermal bioaccessibility of PBDEs in polyethylene (PE) MPs was significantly higher (P < 0.05) than in polypropylene (PP) MPs. Both log K_ow and water solubility influenced the dermal bioaccessibility of PBDEs. For HBCDDs in polystyrene MPs, the dermally bioaccessible fractions were 1.8, 2.0, and 1.6% of the applied dose for α-, β-, and γ-HBCDDs, respectively. MP particle size and the presence of cosmetic formulations (antiperspirant, foundation, moisturizer and sunscreen) influenced the bioaccessibility of PBDEs and HBCDDs in MP matrices at varying degrees of significance. Human exposure to ∑PBDEs and ∑HBCDDs via dermal contact with MPs ranged from 0.02 to 22.2 and 0.01 to 231 ng (kg bw)^-1 d^-1 and from 0.02 to 6.27 and 0.2 to 65 ng (kg bw)^-1 d^-1 for adults and toddlers, respectively. Dermal exposure to PBDEs and HBCDDs in MPs is substantial, highlighting for the first time the significance of the dermal pathway as a major route of human exposure to additive chemicals in microplastics.

There's something in the air: A review of sources, prevalence and behaviour of microplastics in the atmosphere

Literature regarding microplastics in the atmosphere has advanced in recent years. However, studies have been undertaken in isolation with minimal collaboration and exploration of the relationships between air, deposition and dust. This review collates concentrations (particle count and mass-based), shape, size and polymetric characteristics for microplastics in ambient air (m3), deposition (m2/day), dust (microplastics/g) and snow (microplastics/L) from 124 peer-reviewed articles to provide a holistic overview and analysis of our current knowledge. In summary, ambient air featured concentrations between <1 to >1000 microplastics/m³ (outdoor) and <1 microplastic/m³ to 1583 ± 1181 (mean) microplastics/m³ (indoor), consisting of polyethylene terephthalate, polyethylene, polypropylene. No difference (p > 0.05) was observed between indoor and outdoor concentrations or the minimum size of microplastics (p > 0.5). Maximum microplastic sizes were larger indoors (p < 0.05). Deposition concentrations ranged between 0.5 and 1357 microplastics/m²/day (outdoor) and 475 to 19,600 microplastics/m²/day (indoor), including polyethylene, polystyrene, polypropylene, polyethylene terephthalate. Concentrations varied between indoor and outdoor deposition (p < 0.05), being more abundant indoors, potentially closer to sources/sinks. No difference was observed between the minimum or maximum reported microplastic sizes within indoor and outdoor deposition (p > 0.05). Road dust concentrations varied between 2 ± 2 and 477 microplastics/g (mean), consisting of polyvinyl chloride, polyethylene, polypropylene. Mean outdoor dust concentrations ranged from <1 microplastic/g (remote desert) to between 18 and 225 microplastics/g, comprised of polyethylene terephthalate, polyamide, polypropylene. Snow concentrations varied between 0.1 and 30,000 microplastics/L, containing polyethylene, polyamide, polypropylene. Concentrations within indoor dust varied between 10 and 67,000 microplastics/g, including polyethylene terephthalate, polyethylene, polypropylene. No difference was observed between indoor and outdoor concentrations (microplastics/g) or maximum size (p > 0.05). The minimum size of microplastics were smaller within outdoor dust (p > 0.05). Although comparability is hindered by differing sampling methods, analytical techniques, polymers investigated, spectral libraries and inconsistent terminology, this review provides a synopsis of knowledge to date regarding atmospheric microplastics.

Toxicological effects of micro/nano-plastics on mouse/rat models: a systematic review and meta-analysis

Micro/nano-plastics (MNPs) are considered a heterogeneous class of environmental contaminants that cause multiple toxic effects on biological species. As the commonly used mammalian models to study the effects of MNPs with regard to their toxic effects, the mouse and rat models are making a great contribution to the disciplines of environmental toxicology and medical health. However, the toxic effects of MNPs have not been systematically summarized. Therefore, a systematic review and a meta-analysis of the toxic effects of MNPs on mouse/rat models were conducted. A total of seven main categories were established in this systematic review, and 24 subcategories were further divided according to the specific physiological significance of the endpoint or the classification of the physiological system, which covered all the selected pieces of literature. A total of 1,762 biological endpoints were found, and 52.78% of them were significantly affected. This fact indicates that there are relative factors, including the size, polymer type, concentration, and exposure time of MNPs and different sexes of mouse/rat models that could significantly affect the biological endpoints. These biological endpoints can be classified into various factors, such as the dose-response relationships between MNP concentration and physiological categories of the nervous system, growth, reproduction, digestive tract histopathology, and inflammatory cytokine level, among others. MNPs negatively affected the blood glucose metabolism, lipid metabolism, and reproductive function in mice. The reproductive function in male mice is more sensitive to the toxic effects of MNPs. These findings also provide insights into and directions for exploring the evidence and mechanisms of the toxic effects of MNPs on human health. It is clear that more research is required on the pathological mechanisms at the molecular level and the long-term effects of tissue accumulation.

Residential houses - a major point source of microplastic pollution: insights on the various sources, their transport, transformation, and toxicity behaviour

Municipal wastewater has been considered as one of the largest contributors and carriers of microplastics to the aquatic environment. However, the various residential activities that generate municipal wastewater are equally significant whenever the source of microplastics in aquatic system is accounted. However, so far, only municipal wastewater has received wide attention in previous review articles. Hence, this review article is written to address this gap by highlighting, firstly, the chances of microplastics arising from the usage of personal care products (PCPs), laundry washing, face masks, and other potential sources. Thereafter, the various factors influencing the generation and intensity of indoor microplastic pollution and the evidence available on the possibility of microplastic inhalation by humans and pet animals are explained. Followed by that, the removal efficiency of microplastics observed in wastewater treatment plants, the fate of microplastics present in the effluent and biosolids, and their impact on aquatic and soil environment are explored. Furthermore, the impact of aging on the characteristics of microsized plastics has been explored. Finally, the influence of age and size of microplastics on the toxicity effects and the factors impacting the retention and accumulation of microplastics in aquatic species are reviewed. Furthermore, the prominent pathway of microplastics into the human body and the studies available on the toxicity effects observed in human cells upon exposure to microplastics of different characteristics are explored.

Review of microplastics in the indoor environment: Distribution, human exposure and potential health impacts

The emergence of microplastics (MPs) pollution as a global environmental concern has attracted significant attention in the last decade. The majority of the human population spends most of their time indoors, leading to increased exposure to MPs contamination through various sources such as settled dust, air, drinking water and food. Although research on indoor MPs has intensified significantly in recent years, comprehensive reviews on this topic remain limited. Therefore, this review comprehensively analyses the occurrence, distribution, human exposure, potential health impact and mitigation strategies of MPs in the indoor air environment. Specifically, we focus on the risks associated with finer MPs that can translocate into the circulatory system and other organs, emphasizing the need for continued research to develop effective strategies to mitigate the risks associated with MPs exposure. Our findings suggest that indoor MPs impose potential risk to human health, and strategies for mitigating exposure should be further explored.

Occurrence of 1,3-Diphenylguanidine, 1,3-Di-o-tolylguanidine, and 1,2,3-Triphenylguanidine in Indoor Dust from 11 Countries: Implications for Human Exposure

1,3-Diphenylguanidine (DPG), 1,3-di-o-tolylguanidine (DTG), and 1,2,3-triphenylguanidine (TPG) are synthetic chemicals widely used in rubber and other polymers. Nevertheless, limited information is available on their occurrence in indoor dust. We measured these chemicals in 332 dust samples collected from 11 countries. DPG, DTG, and TPG were found in 100%, 62%, and 76% of the house dust samples, at median concentrations of 140, 2.3, and 0.9 ng/g, respectively. The sum concentrations of DPG and its analogues varied among the countries in the following decreasing order: Japan (median: 1300 ng/g) > Greece (940) > South Korea (560) > Saudi Arabia (440) > the United States (250) > Kuwait (160) > Romania (140) > Vietnam (120) > Colombia (100) > Pakistan (33) > India (26). DPG accounted for ≥87% of the sum concentrations of the three compounds in all countries. DPG, DTG, and TPG exhibited significant correlations (r: 0.35-0.73; p < 0.001). Elevated concentrations of DPG were found in dust from certain microenvironments (e.g., offices and cars). Human exposure to DPG through dust ingestion were in the ranges 0.07-4.40, 0.09-5.20, 0.03-1.70, 0.02-1.04, and 0.01-0.87 ng/kg body weight (BW)/day for infants, toddlers, children, teenagers, and adults, respectively.

Microplastics in infant milk powder

Microplastics can be found almost everywhere and extensively expose to human. Infants are vulnerable, and the potential risks of microplastics may be greater for infants, however, infants' microplastic exposure is still poorly understood. Since milk powder makes up a significant portion of many infants' diets, we investigated microplastic pollution in infant milk powder and calculated the microplastic exposure from milk powder, feeding bottles and milk powder preparation. On one hand, we studied 13 different types of milk powder with different packaging, processing systems, and milk sources. The boxed milk powder (7 ± 3 items/100 g) was more polluted with microplastics than the canned milk powder (4 ± 3 items/100 g). The inner packaging of the boxed milk powder was plastic and aluminum foil laminated, it emitted 8 ± 2 to 17 ± 1 items/100 g of microplastics, and might be a main source of microplastics in boxed milk powder. On the other hand, we found that when infants consume milk powder, the microplastic exposure from milk powder itself is little, exposure from feeding bottles is 6.8 times higher than that from milk powder and milk powder preparation is 1.7 times higher.

Microplastic pollution in sediments of urban rainwater drainage system

The sink of microplastics (MPs) in sediments of urban rainwater drainage system (RDS) is of great concern, because the MPs deposited can be resuspended by flow disturbance. Previous research has confirmed the significant accumulation of MPs in sediments of urban RDS, but it remains poorly elucidated, such as pollution sources and influencing factors. In this study, we investigated the MPs in sediments from RDS of a university campus. MPs were detected from all sediment samples, showing the ubiquity of microplastic pollution. Among 11 samples MPs' abundance ranged from 80 to 2610 particles/kg (dry weight), with highly spatial variability, depending on land type and environmental management practice within the catchment. Sites from office & teaching area had the averaged abundance of 335.00 ± 196.85 particles/kg, while 270.00 ± 89.09 particles/kg for staff residential area, and 795.00 ± 1050.65 particles/kg for student living area, indicating that the sediments of RDS from student living area had the highest abundance of MPs. However, independent sample t-test analysis suggests there is no statistically significant difference between land types, because of effective environmental management practices in the catchment. The surfaces of MPs were much rough, which implies that the fragmentation of larger plastic particles resulted in the production of MPs. Although the MPs of <1000 μm were the most, 1000-2000 μm MPs also accounted for a significant proportion in this study, showing a slight difference from the previous study in which MPs over 1 mm were quite low. Polypropylene (PP) and polyester (PET) found to be dominant with 49.75 ± 18.69 % and 49.75 ± 18.69 % of the total number, respectively. As to shapes, the proportion of fiber and fragment MPs exceeded 80 %. The color of MPs diversified greatly, and the MPs with bright colors occupied over 80 %. Fabric fibers, food packaging and courier packaging materials were figured out to be the considerable contributors of MPs.

High temporal resolution records of outdoor and indoor airborne microplastics

There is increasing concern regarding airborne microplastics, but to date, studies have typically used coarse interval sampling (a day or longer) to generate deposition and concentration estimates. In this proof-of-concept study, we used a Burkard volumetric spore trap (intake 10 L min-1; recording airborne particulates onto an adhesive-coated tape moving at 2 mm hr-1) to assess whether this approach has potential to record airborne microplastics at an hourly resolution, thereby providing detailed diurnal patterns. Simultaneous sampling at outdoor and indoor locations at rural and urban sites showed clear daily and weekly patterns in microplastic concentrations which may be related to people and vehicle movement. Indoor residential concentrations of suspected microplastics were the highest (reaching hourly concentrations of 40-50 m-3), whilst rural outdoor concentrations were very low (typically 1-2 m-3 h-1). Whilst the approach shows great potential for high resolution data generation, further development is required for spectroscopic analysis and hence chemical confirmation of visual microplastic identification.

Microplastics in terrestrial ecosystem: Sources and migration in soil environment

Plastics, especially microplastics in soils, are considered a severe environmental issue worldwide. However, globally, the main research focus is on microplastic pollution in the marine environment, the microplastic pollution on soils and sediments remains on the sideline so far. But the fact is that microplastics are omnipresent in terrestrial systems in the form of microbeads in industrial systems and in sewage sludge. Their presence in agricultural soils and sediments is enormously increased due to plastic mulching, plastic greenhouses and compost and extensive use of controlled release fertilizers. Therefore, this review outlines the global scenario regarding plastics and microplastics production, consumption, and possible pathways of penetration into the soil environment. Various mechanisms to restrict and manage the pathways of plastics and microplastics into the soil environment are also discussed. This review also focuses on the challenges and limitations on the use of plastic alternates such as bioplastics and oxo plastics. Also, the knowledge gaps on the source of microplastics in the environment and their deleterious effects on properties of soil, soil health and focused light on their soil trophic transfer in food chains via plants. This review provides a detailed insight on the management and possible control measures to alleviate the potential risk caused by microplastics pollution in the soil environment and the overall ecosystem's health. In spite of the occurrence and fate of microplastics on terrestrial environment, knowledge gaps and challenges for tackling this contamination are also explored which facilitates the policy makers to develop regulatory measures towards the containment of microplastics in living ecosystem.

Atmospheric microplastics: exposure, toxicity, and detrimental health effects

Microplastics (MPs) are micro-particulate pollutants present in all environments whose ubiquity leads humans to unavoidable exposure. Due to low density, MPs also accumulate in the atmosphere, where they are easily transported worldwide and come into direct contact with the human body by inhalation or ingestion, causing detrimental health effects. This literature review presents the sources of atmospheric MPs pollution, transport routes, physicochemical characteristics, and environmental interactions. The document also explains the implications for human health and analyzes the risk of exposure based on the potential toxicity and the concentration in the atmosphere. MPs' toxicity lies in their physical characteristics, chemical composition, environmental interactions, and degree of aging. The abundance and concentration of these microparticles are associated with nearby production sources and their displacement in the atmosphere. The above elements are presented in an integrated way to facilitate a better understanding of the associated risk. The investigation results encourage the development of future research that delves into the health implications of exposure to airborne MPs and raises awareness of the risks of current plastic pollution to promote the establishment of relevant mitigation policies and procedures.

Nanoplastics causes extensive congenital malformations during embryonic development by passively targeting neural crest cells

Nanomaterials are widespread in the human environment as pollutants, and are being actively developed for use in human medicine. We have investigated how the size and dose of polystyrene nanoparticles affects malformations in chicken embryos, and have characterized the mechanisms by which they interfere with normal development. We find that nanoplastics can cross the embryonic gut wall. When injected into the vitelline vein, nanoplastics become distributed in the circulation to multiple organs. We find that the exposure of embryos to polystyrene nanoparticles produces malformations that are far more serious and extensive than has been previously reported. These malformations include major congenital heart defects that impair cardiac function. We show that the mechanism of toxicity is the selective binding of polystyrene nanoplastics nanoparticles to neural crest cells, leading to the death and impaired migration of those cells. Consistent with our new model, most of the malformations seen in this study are in organs that depend for their normal development on neural crest cells. These results are a matter of concern given the large and growing burden of nanoplastics in the environment. Our findings suggest that nanoplastics may pose a health risk to the developing embryo.

Microplastics occurrence, detection and removal with emphasis on insect larvae gut microbiota

Microplastics have been identified in all living forms including human beings, the present need is to restrain its spread and devise measures to remediate microplastics from polluted ecosystems. In this regard, the present review emphasizes on the occurrence, sources detection and toxic effects of microplastics in various ecosystems. The removal of microplastics is prevalent by various physico-chemical and biological methods, although the removal efficiency by biological methods is low. It has been noted that the degradation of plastics by insect gut larvae is a well-known aspect, however, the underlying mechanism has not been completely identified. Studies conducted have shown the magnificent contribution of gut microbiota, which have been isolated and exploited for microplastic remediation. This review also focuses on this avenue, as it highlights the contribution of insect gut microbiota in microplastic degradation along with challenges faced and future prospects in this area.

A Novel Strategy to Directly Quantify Polyethylene Microplastics in PM2.5 Based on Pyrolysis-Gas Chromatography-Tandem Mass Spectrometry

The broad application of plastic products has resulted in a considerable release of microplastics (MPs) into the ecosystem. While MPs in other environmental matrices (e.g., soil and water) have been studied for a long time, the atmospheric fine particulate matter (PM_2.5)-bound MPs are rarely investigated due to the lack of an appropriate analytical approach. The prevalently used visual and spectroscopic means (e.g., optical microscopy, Fourier-transform infrared spectroscopy, and Raman spectroscopy) suffer from obvious drawbacks that cannot precisely detect MPs of tiny sizes and provide quantitative information. In the present study, a novel strategy that does not require sample pretreatment was developed to first effectuate accurate quantification of polyethylene MP (PE-MP) in PM_2.5 based on pyrolysis-gas chromatography-tandem mass spectrometry (Pyr-GC-MS/MS). It featured acceptable recoveries (97%-110%), high sensitivity (LOD = 1 pg), and qualified precisions (RSD of 3%-13%). Employing this approach, for the first time, exact atmospheric concentrations of PE-MPs in PM_2.5 from megacities in North (Zhengzhou and Taiyuan) and South (Guangzhou) China were obtained, and relatively serious pollution was found in Taiyuan. The 100% sample detection rates also suggested the widespread occurrence and possible human exposure risks of PM_2.5-bound PE-MPs. In brief, the new strategy could conduct direct, sensitive, and accurate quantification of PE-MP in PM_2.5, favoring further studies of environmental fates, distributions, and toxicities of atmospheric MPs.

Parabens in indoor dust from houses, university dormitories, and cosmetics stores in Nanjing, China: occurrence and human exposure

Parabens are extensively used as preservatives in consumer products. The widespread exposure of human to parabens has been associated with adverse health effects. In this study, six parabens were measured in 100 indoor dust collected from homes, university dormitories, and cosmetics stores in Nanjing, China. Concentrations of sum of six parabens (∑₆parabens) in dust from homes, university dormitories, and cosmetics stores ranged from 13.1 to 4.22 × 10³, 102 to 3.03 × 10³, and 7.02 × 10³ to 3.41 × 10⁴ ng/g, respectively. The median concentrations of ∑₆parabens in dust from cosmetics stores (1.5 × 10⁴ ng/g) were 1-2 orders of magnitude higher than those found in dust from homes (166 ng/g) and university dormitories (1.23 × 10³ ng/g) (p < 0.01). Methyl-, ethyl-, and propyl-parabens were the predominant compounds found in dust samples, and the sum concentrations of three compounds accounted for 71.9-99.6%, 93.1-99.6%, and 94.7-99.6% of ∑₆parabens in dust from homes, university dormitories, and cosmetics stores, respectively. Significant positive correlations were found between methyl- and propyl-parabens concentrations in three types of dust (r = 0.789-0.909), indicating their coexistence in many consumer products. The estimated daily intake (EDI) of ∑₆parabens for adults via dust ingestion was highest for employees in cosmetics stores (median: 4.6 ng/kg bw/day), followed by university students (0.56-0.64 ng/kg bw/day), and adults in homes (0.075-0.087 ng/kg bw/day). The result provides a better understanding of human exposure to parabens in different indoor environments, and more studies are needed to further investigate the occurrence and potential health risks of parabens in dust from various microenvironments.

Investigating nanoplastics toxicity using advanced stem cell-based intestinal and lung in vitro models

Plastic particles in the nanometer range-called nanoplastics-are environmental contaminants with growing public health concern. As plastic particles are present in water, soil, air and food, human exposure via intestine and lung is unavoidable, but possible health effects are still to be elucidated. To better understand the Mode of Action of plastic particles, it is key to use experimental models that best reflect human physiology. Novel assessment methods like advanced cell models and several alternative approaches are currently used and developed in the scientific community. So far, the use of cancer cell line-based models is the standard approach regarding in vitro nanotoxicology. However, among the many advantages of the use of cancer cell lines, there are also disadvantages that might favor other approaches. In this review, we compare cell line-based models with stem cell-based in vitro models of the human intestine and lung. In the context of nanoplastics research, we highlight the advantages that come with the use of stem cells. Further, the specific challenges of testing nanoplastics in vitro are discussed. Although the use of stem cell-based models can be demanding, we conclude that, depending on the research question, stem cells in combination with advanced exposure strategies might be a more suitable approach than cancer cell lines when it comes to toxicological investigation of nanoplastics.

Assessment of microplastics pollution in aquatic species (fish, crab, and snail), water, and sediment from the Buriganga River, Bangladesh: An ecological risk appraisals

Current work focus on microplastic (MPs) occurrence in the water, sediment, and aquatic species (fish, crab, and snail) of the Buriganga River, Bangladesh, with an ecological risk assessment perspective. It also includes the distribution of MPs in different river ecosystem segments and the presence of heavy metal (loid)s (HMs) in water, sediments, and MPs surface. The MPs were inspected by stereomicroscope to identify the shapes, color, and size, and Fourier transform infrared (FTIR) spectroscopy was used to characterize polymer types. The samples concentration of four HMs viz., As, Cd, Cr, and Pb were determined by atomic absorption spectrometry (AAS). The possible MPs content in water, sediment, fish, crab, and snail were varied from 0.250 to 0.117 MPs/mL, 3.5-8.17 MPs/g, 0.65-3.82 MPs/g, 3.75-4.28 MPs/g, and 0.84-1.12 MPs/g, respectively. Fibers and fragments were the most dominant shape, less than 0.5 mm was dominant in size, and blue was the dominant color. In the evaluation of the chemical composition of MPs in water, sediment, fish, snail, and crab samples, Polyethylene terephthalate (PETE), Ethylene-vinyl acetate (EVA), High-density polyethylene (HDPE), Acrylonitrile butadiene styrene (ABS), Cellulose acetate (CA), and Nylon were identified. Regarding HMs load, the river demonstrated a highly polluted environment following the abundance pattern Cr > Pb > As>Cd. SEM-EDAX of MPs was conducted to investigate the surface MP's surface and elemental composition. It reveals that the MPs surface has characteristic flakes, cracks, and adhering particles along with Si, K, Au, C, and O on the surface studied MPs. There is no significant relationship found among the ecosystem segments. However, Ompok bimaculatus species show a negative relationship of MPs distribution with water and sediment. Moreover, according to the ecological risk of MPs pollution in the Buriganga River, it was in category-I, indicating considerable pollution load due to the presence of MPs.

Atmospheric micro (nano) plastics: future growing concerns for human health

ABSTRACT

Plastics are an integral but largely inconspicuous part of daily human routines. The present review paper uses cross-disciplinary scientific literature to examine and assess the possible effects of nanoplastics (NPs) concerning microplastics (MPs) on human health and summarizes crucial areas for future research. Although research on the nature and consequences of MPs has seen a substantial rise, only limited studies have concentrated on the atmospheric nanosized polymeric particles. However, due to the intrinsic technological complications in separating and computing them, their existence has been difficult to determine correctly. There is a consensus that these are not only existing in the environment but can get directly released or as the outcome of weathering of larger fragments, and it is believed to be that combustion can be the tertiary source of polymeric particles. NPs can have harmful consequences on human health, and their exposure may happen via ingestion, inhalation, or absorption by the skin. The atmospheric fallout of micro (nano) plastics may be responsible for contaminating the environment. Apart from this, different drivers affect the concentration of micro (nano) plastics in every environment compartment like wind, water currents, vectors, soil erosion, run-off, etc. Their high specific surface for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. These NPs could potentially cause physical damage by the particles themselves and biological stress by NPs alone or by leaching additives. However, there is minimal understanding of the occurrence, distribution, abundance, and fate of NPs in the environment, partially due to the lack of suitable techniques for separating and identifying NPs from complex environmental matrices.

HIGHLIGHTS

Micro (nano) plastics generated may reach the soil, water, and atmospheric compartments.Atmospheric currents serve as a way to transport, leading to micro (nano) plastics pollution.Exposure to micro (nano) plastics may happen via ingestion, inhalation, or absorption by the skin.Nanoplastics may be environmentally more harmful than other plastic particles; the focus should be on defining the exact size range.Visual classification of micro (nano) plastics is poor in reliability and may also contribute to microplastics being misidentified.