Occurrences and removal of pharmaceuticals and personal care products (PPCPs) in drinking water and water/sewage treatment plants: A review

MgO-loaded tubular ceramic membrane with spatial nanoconfinement for enhanced catalytic ozonation in refractory wastewater treatment

Heterogeneous catalytic ozonation (HCO) enables the destruction of organic pollutants in wastewater via oxidation by powerful hydroxyl radicals (·OH). However, the availability of short-lived ·OH in aqueous bulk is low in practical treatment scenarios due to mass transfer limitations and quenching of water constituents. Herein, we overcome these challenges by loading MgO catalysts inside the pores of a tubular ceramic membrane (denoted as CCM) to confine ·OH within the nanopores and achieve efficient pollutant removal. When the pore size of the membrane was reduced from 1000 to 50 nm, the removal of ibuprofen (IBU) by CCM was increased from 49.6 % to 90.2 % due to the enhancement of ·OH enrichment in the nanospace. In addition, the CCM exhibited high catalytic activity in the presence of co-existing ions and over a wide pH range, as well as good self-cleaning ability in treating secondary wastewater. The experimental results revealed that ·OH were the dominant reactive oxygen species (ROS) in pollutant degradation, while surface hydroxyl groups were active sites for the generation of ·OH via ozone decomposition. This work provides a promising strategy to enhance the utilization of ·OH in HCO for the efficient degradation of organic pollutants in wastewater under spatial confinement.

Multidimensional occurrence and diet risk of emerging contaminants in freshwater with urban agglomerations

Freshwater systems near highly urbanized areas are extremely susceptible to emerging contaminants (ECs), yet their stereoscopic persistence in aquatic ecosystems and related risks remain largely unknown. Herein, we characterized the multi-mediums distribution of 63 ECs in Baiyangdian Lake, the biggest urban lake in the North of China. We identified variations in the seasonal patterns of aquatic EC levels, which decreased in water and increased in sediment from wet to dry seasons. Surprisingly, higher concentrations and a greater variety of ECs were detected in reeds than in aquatic animals, indicating that plants may contribute to the transferring of ECs. Source analysis indicated that human activity considerably affected the distribution and risk of ECs. The dietary risk of ECs is most pronounced among children following the intake of aquatic products, especially with a relatively higher risk associated with fish consumption. Besides, a comprehensive scoring ranking method was proposed, and 9 ECs, including BPS and macrolide antibiotics, are identified as prioritized control pollutants. These findings highlight the risks associated with aquatic ECs and can facilitate the development of effective management strategies.

Remediation of pharmacophoric laboratory waste by using biodegradable carbon nanoparticles of bacterial biofilm origin

Research laboratories generate a broad range of hazardous pharmacophoric chemical contaminants, from drugs to dyes used during various experimental procedures. In the recent past, biological methods have demonstrated great potential in the remediation of such contaminants. However, the presence of pharmacophoric chemicals containing antibiotics, xenobiotics, and heavy metals suppresses the growth and survivability of used microbial agents, thus decreasing the overall efficiency of biological remediation processes. Bacterial biofilm is a natural arrangement to counter some of these inhibitions but its use in a systemic manner, portable devices, and pollutant remediation plants post serious challenges. This could be countered by synthesizing a biodegradable carbon nanoparticle from bacterial biofilm. In this study, extracellular polymeric substance-based carbon nanoparticles (Bio-EPS-CNPs) were synthesized from bacterial biofilm derived from Bacillus subtilis NCIB 3610, as a model bacterial system. The produced Bio-EPS-CNPs were investigated for physiochemical properties by dynamic light scattering, optical, Fourier-transformed infrared, and Raman spectroscopy techniques, whereas X-ray diffraction study, scanning electron microscopy, and transmission electron microscopy were used to investigate structural and morphological features. The Bio-EPS-CNPs exhibited negative surface charge with spherical morphology having a uniform size of sub-100 nm. The maximum remediation of some laboratory-produced pharmacophoric chemicals was achieved through a five-round scavenging process and confirmed by UV/Vis spectroscopic analysis with respect to the used pharmacophore. This bioinspired remediation of used pharmacophoric chemicals was achieved through the mechanism of surface adsorption via hydrogen bonding and electrostatic interactions, as revealed by different characterizations. Further experiments were performed to investigate the effects of pH, temperature, stirring, and the protocol of scavenging to establish Bio-EPS-CNP as a possible alternative to be used in research laboratories for efficient removal of pharmacophoric chemicals by incorporating it in a portable, filter-based device.

Performance evaluation of a new sponge-based moving bed biofilm reactor for the removal of pharmaceutical pollutants from real wastewater

Pharmaceutical pollutants, a group of emerging contaminants, have attracted outstanding attention in recent years, and their removal from aquatic environments has been addressed. In the current study, a new sponge-based moving bed biofilm reactor (MBBR) was developed to remove chemical oxygen demand (COD) and the pharmaceutical compound Ibuprofen (IBU). A 30-L pilot scale MBBR was constructed, which was continuously fed from the effluent of the first clarifier of the Southern Tehran wastewater treatment plant. The controlled operational parameters were pH in the natural range, Dissolved Oxygen of 1.5-2 mg/L, average suspended mixed liquor suspended solids (MLSS), and mixed liquor volatile suspended solids (MLVSS) of 1.68 ± 0.1 g/L and 1.48 ± 0.1 g/L, respectively. The effect of hydraulic retention time (HRT) (5 h, 10 h, 15 h), filling ratio (10%, 20%, 30%), and initial IBU concentration (2 mg/L, 5 mg/L, 10 mg/L) on removal efficiencies was assessed. The findings of this study revealed a COD removal efficiency ranging from 48.9 to 96.7%, with the best removal efficiency observed at an HRT of 10 h, a filling ratio of 20%, and an initial IBU concentration of 2 mg/L. Simultaneously, the IBU removal rate ranged from 25 to 92.7%, with the highest removal efficiency observed under the same HRT and filling ratio, albeit with an initial IBU concentration of 5 mg/L. An extension of HRT from 5 to 10 h significantly improved both COD and IBU removal. However, further extension from 10 to 15 h slightly enhanced the removal efficiency of COD and IBU, and even in some cases, removal efficiency decreased. Based on the obtained results, 20% of the filling ratio was chosen as the optimum state. Increasing the initial concentration of IBU from 2 to 5 mg/L generally improved COD and IBU removal, whereas an increase from 5 to 10 mg/L caused a decline in COD and IBU removal. This study also optimized the reactor's efficiency for COD and IBU removal by using response surface methodology (RSM) with independent variables of HRT, filling ratio, and initial IBU concentration. In this regard, the quadratic model was found to be significant. Utilizing the central composite design (CCD), the optimal operating parameters at an HRT of 10 h, a filling ratio of 21%, and an initial IBU concentration of 3 mg/L were pinpointed, achieving the highest COD and IBU removal efficiencies. The present study demonstrated that sponge-based MBBR stands out as a promising technology for COD and IBU removal.

Influences of earthworm activity and mucus on Cd phytoremediation based on harvesting different leaf types of tall fescue (Festuca arundinacea)

To explore cost-effective and efficient phytoremediation strategies, this study investigated the distinct roles of earthworm activity and mucus in enhancing Cd phytoextraction from soils contaminated by Festuca arundinacea, focusing on the comparative advantages of selective leaf harvesting versus traditional whole-plant harvesting methods. Our study employed a horticultural trial to explore how earthworm activity and mucus affect Festuca arundinacea' s Cd phytoremediation in soils using control, earthworm, and mucus treatments to examine their respective effects on plant growth and Cd distribution. Earthworm activity increased the dry weight of leaves by 13.5% and significantly increased the dry weights of declining and senescent leaves, surpassing that of the control by more than 40%. Earthworm mucus had a similar, albeit less pronounced, effect on plant growth than earthworm activity. This study not only validated the significant role of earthworm activity in enhancing Cd phytoextraction by Festuca arundinacea, with earthworm activity leading to over 85% of Cd being allocated to senescent tissues that comprise only approximately 20% of the plant biomass, but also highlighted a sustainable and cost-effective approach to phytoremediation by emphasizing selective leaf harvesting supported by earthworm activity. By demonstrating that earthworm mucus alone can redistribute Cd with less efficiency compared to live earthworms, our findings offer practical insights into optimizing phytoremediation strategies and underscore the need for further research into the synergistic effects of biological agents in soil remediation processes.

Linking wastewater treatment plant effluents to water quality and hydrology: Effects of multiple stressors on fish communities

Wastewater treatment plants (WWTPs) are essential for maintaining a good water quality of surface waters. However, WWTPs are also associated with water quality deterioration and hydro-morphological alteration. Riverine communities respond to these stressors with changes in their community structure, abundance and diversity. In this study, we used a dataset of 94 monitoring sites across North Rhine-Westphalia, Germany to investigate the influence of WWTPs on the water quality and hydro-morphological quality in river sections downstream of WWTP effluents. More specifically, we analyzed the effects of the percentage of WWTP effluents (in relation to median base flow) on four stressor groups (physico-chemistry, micropollutants, hydrological and morphological alteration) using Linear Mixed Models (LMM). Furthermore, we assessed the impact of a selection of twelve ecologically relevant stressor variables reflecting water quality deterioration and hydro-morphological alteration on reference fish communities using Canonical Correspondence Analysis (CCA). The percentage of WWTP effluents was correlated with water quality, especially with toxic units of a wide range of pharmaceuticals including diclofenac, venlafaxine and sulfamethoxazole (R² up to 0.54) as well as specific pesticides (e.g., terbutryn: R² = 0.33). The correlation of percent WWTP effluents with hydro-morphological alteration was weaker and most pronounced for the frequency of high flow (R² = 0.24) and flow variability (R² = 0.19). About 40 % of the variance in the fish community structure were explained by 12 stressor variables in the CCA models. Water quality and hydrological, but not morphological stressors showed strong albeit highly variable effects on individual fish species. The results indicate that water quality degradation and hydrological alteration are important factors determining the ecological status of fish communities. In this context, WWTP effluents can impose relevant point sources of pollution that affect water quality but also cause alterations of the hydrological regime. Further management measures addressing both stressor groups are needed to improve the ecological status.

Efficiently photocatalysis activation of peroxymonosulfate by bimetallic metal-organic frameworks Mn-MIL-53(Fe) for ibuprofen degradation: Synergistic efficiency, mechanism and degradation pathways

In this study, a UV-driven photocatalytic activation of peroxymonosulfate (PMS) system was constructed using bimetallic metal-organic frameworks to degrade pharmaceuticals and personal care products (PPCPs). Mn-MIL-53(Fe) was successfully synthesised by adjusting the doping ratio of Mn using solvothermal method. The removal of ibuprofen (IBP) by UV/Mn-MIL-53(Fe)/PMS process was as high as 79.7% in 30 min with a Mn doping ratio of 1.0 (molar ratio of Mn to Fe), and the reaction rate constant was 26.9% higher than undoped. Mn-MIL-53(Fe) had been systematically characterized in terms of its physical structure, microscopic morphology, surface functional groups and photoelectric properties. The mechanism investigation revealed that the cycling of Mn and Fe accelerated the rate of electron transfer in the system, which significantly increased the activation efficacy of PMS to generate more hydroxyl and sulfate radicals for IBP degradation. A total of 13 transformation products were detected during the degradation of IBP by the UV/Mn-MIL-53(Fe)/PMS process. Theoretical calculations were used to predict the sites on the IBP molecule that were vulnerable to attack, and four possible degradation pathways were deduced. The excellent stability and efficient catalytic properties of Mn-MIL-53(Fe) provided a promising solution to the problem of water treatment contaminated with PPCPs.

The potential contribution of aquatic wildlife to antibiotic resistance dissemination in freshwater ecosystems: A review

Antibiotic resistance (AR) is one of the major health threats of our time. The presence of antibiotics in the environment and their continuous release from sewage treatment plants, chemical manufacturing plants and animal husbandry, agriculture and aquaculture, result in constant selection pressure on microbial organisms. This presence leads to the emergence, mobilization, horizontal gene transfer and a selection of antibiotic resistance genes, resistant bacteria and mobile genetic elements. Under these circumstances, aquatic wildlife is impacted in all compartments, including freshwater organisms with partially impermeable microbiota. In this narrative review, recent advancements in terms of occurrence of antibiotics and antibiotic resistance genes in sewage treatment plant effluents source compared to freshwater have been examined, occurrence of antibiotic resistance in wildlife, as well as experiments on antibiotic exposure. Based on this current state of knowledge, we propose the hypothesis that freshwater aquatic wildlife may play a crucial role in the dissemination of antibiotic resistance within the environment. Specifically, we suggest that organisms with high bacterial density tissues, which are partially isolated from the external environment, such as fishes and amphibians, could potentially be reservoirs and amplifiers of antibiotic resistance in the environment, potentially favoring the increase of the abundance of antibiotic resistance genes and resistant bacteria. Potential avenues for further research (trophic transfer, innovative exposure experiment) and action (biodiversity eco-engineering) are finally proposed.

Comparative study of emerging pollutants of interest in the groundwater of the volcanic islands of La Palma and El Hierro (Canary Islands)

Emerging pollutants (EPs) include a wide array of chemical compounds, as well as some microorganisms, which presence was unknown or unmeasurable until recently, or have recently started to be considered a threat towards the environment or animal and human health. No clear or homogeneous regulations exist for their measurement or control, and efforts should be made to assess their presence and offer solutions for their safe management, as well as to achieve an optimal protection of water resources. A previous study performed by our research group thoroughly studied a wide profile of EPs in El Hierro Island (Canary Islands) for the first time. Now, we present the study of the same panel of 70 EPs in La Palma Island (Canary Islands). 14 samples were collected in 2021, at different locations in La Palma island, representing seven municipalities (Los Llanos de Aridane, Santa Cruz de la Palma, El Paso, Breña Baja, Tazacorte, Barlovento and Fuencaliente) and four installation types (Piezometers/Wells, Wastewater Treatment Plant (WWTP), Water Gallery and Water Springs). High performance liquid chromatography-mass spectrometry (HPLC-MS) was performed to analyse the EP array, which included five chemical families: UV filters, UV blockers/stabilizers, parabens, Pharmaceutical Active Compounds (PhACs) and pesticides. Subsequently, a comprehensive descriptive and statistical analysis, including different tests was performed on the data obtained. Heterogeneous concentration levels of the EPs studied were found based on municipality and installation type among the island, with some of the PhACs and UV blockers/stabilizers showing very high levels, especially at Breña Baja and wastewater treatment plants (WWTPs). It is worth noting that some of the samples comprised within the WWTPs category were collected outside the treatment plant, after water has been treated, so they should not bear dangerous concentrations of any hazardous compound. The high presence of two pesticides, imidacloprid (ranging from 68.7 to 24,896.5 ng⋅L-1) and acetamiprid (ranging from 1010.7 to 5168.1 ng⋅L-1) was worth highlighting too. In addition, three EP concentration clusters were found to virtually divide the island based on mathematical percentiles of EP mean concentrations, which can help gain more insight into the contamination status of the island and measures that could be taken for their management. Finally, a comparison between La Palma results and the profile observed at El Hierro by our research group was presented. Altogether, the study performed calls for a need to take actions towards avoiding entrance of EPs in the water cycle, and not just focusing on remediation strategies once they have reached the groundwater, freshwater or soil.

The dual-configured hydrogen bonds induced by polymerized deep eutectic solvents-modified magnetic biochar enhanced the selectivity for 3,4-methylenedioxymethamphetamine

The accurate discovering and monitoring of 3,4-methylenedioxymethamphetamine (MDMA) are especially important because of its substantial toxicity and potential harm to human and the ecological systems. Three types of polymerized deep eutectic solvents functionalized magnetic biochar (MBC@poly (AA/AAC/AAm-ChCl)) were successfully synthesized to adsorb MDMA. The isotherm and kinetic data confirmed that MBC@poly (AAm-ChCl) had the strongest adsorption capacity, and the order of adsorption capacity is as follow: MBC@poly(AAm-ChCl) > MBC@poly(AA-ChCl) > MBC@poly(MAA-ChCl), which also revealed that the adsorption was heterogeneous multi-layer chemisorption. The findings of the characterizations manifested that MBC@poly(AAm-ChCl) was the optimal adsorbent owning to its higher nitrogen content, resulting in the formation of a greater number of hydrogen bonds. Due to the strong hydrogen bonding effect of CO and -NH2 functional groups, MBC@poly(AAm-ChCl) exhibited the high selectivity towards MDMA under the coexistence of multiple chemical substances, and excellent adsorption performance over the pH range of 4-11. Urea as a hydrogen bond inhibitor further confirmed MBC@poly(AAm-ChCl) had high-density active hydrogen bonding sites. Furthermore, utilizing density functional theory (DFT) for simulating adsorption both before and after the process verified that the high selectivity of MBC@poly(AAm-ChCl) attributed to the formation of the dual-configured hydrogen bonds. This study provides support for the production of highly selective biochar for use in pretreatment during drug detection.

Uptake/depuration kinetics, bioaccumulation potential and metabolic transformation of a complex pharmaceutical mixture in zebrafish (Danio rerio)

Uptake and elimination kinetics, bioconcentration factors (BCFs), and metabolic transformation of 20 different pharmaceutically active compounds (PhACs), covering a wide range of therapeutic categories and physico-chemical properties, were studied using zebrafish (Danio rerio). The fish were exposed to the mixture of the selected PhACs at environmentally relevant concentrations similar to 10 µg L-1. The experiments were performed in semi-static conditions and comprised a 7-day uptake period followed by a 7-day depuration period. Most of the PhACs reached a concentration plateau within the 7-day uptake-phase which was followed by an efficient depuration, with the observed uptake (ku) and depuration rate constants (kd,) ranging between 0.002 and 3.752 L kg-1 h-1, and 0.010 to 0.217 h-1, respectively. The investigated PhACs showed low to moderate BCFs. The highest BCFs of 47.8, 28.6 and 47.6 L kg-1 were determined for sertraline, diazepam and desloratadine, respectively. A high contribution of metabolic products to the total internal concentration was observed for some PhACs such as codeine (69%), sulfamethoxazole (51%) and verapamil (87%), which has to be taken into account when assessing the bioconcentration potential. Moreover, most of the metabolites exhibited significantly longer half-lives in zebrafish than their parent compounds and affected the overall depuration kinetics.

Occurrence and fate of pharmaceuticals and personal care products in a wastewater treatment plant with Bacillus bio-reactor treatment

Pharmaceuticals and personal care products (PPCPs) have attracted wide attention due to their environmental impacts and health risks. PPCPs released through wastewater treatment plants (WWTPs) are estimated to be 80 %. Nevertheless, the occurrence of PPCPs in the WWTPs equipped with Bacillus spec.-based bioreactors (BBR) treatment system remains unclear. In this study, sludge and waste water samples were collected during separate winter and summer sampling campaigns from a typical BBR treatment system. The results indicate that out of 58 target PPCPs, 27 compounds were detected in the waste water (0.06-1900 ng/L), and 23 were found in the sludge (0.6-7755 ng/g dw). Paraxanthine was the chemical of the highest abundance in the influent due to the high consumption of the parent compounds caffeine and theobromine. The profile for PPCPs in the wastewater and sludge exhibited no seasonal variation. Overall, the removal of target PPCPs in summer is more effective than the winter. In the BBR bio-reactor, it was found that selected PPCPs (at ng/L level) can be completely removed. The efficiency for individual PPCP removal was increased from 1.0 % to 50 % in this unit, after target specific adjustments of the process. The effective removal of selected PPCPs by the BBR treatment system is explained by combined sorption and biodegradation processing. The re-occurrence of PPCPs in the wastewater was monitored. Negative removal efficiency was explained by the cleavage of Phase II metabolites after the biotransformation process, and the lack of equilibrium for PPCPs in the sludge of the second clarifier. A compound specific risk quotient (RQ) was calculated and applied for studying the potential environmental risks. Diphenhydramine is found with the highest environmental risk in wastewater, and 15 other PPCPs show negligible risks in sewage sludge.

Synthesis of recyclable and light-weight graphene oxide/chitosan/genipin sponges for the adsorption of diclofenac, triclosan, and microplastics

Emerging micropollutants, such as pharmaceuticals and microplastics (MPs), have become a pressing water environmental concern. The aim of this study is to synthesize chitosan sponges using graphene oxide (GO) and genipin (GP) for the removal of pharmaceuticals (diclofenac (DCF) and triclosan (TCS)) and MPs, verify their adsorption mechanisms, evaluate the effects of temperature, pH, and salinity on their adsorption capacities, and determine their reusability. The GO5/CS/GP sponge exhibited a macroporous nature (porosity = 95%, density = 32.6 mg/cm3). GO and cross-linker GP enhanced the adsorption of DCF, TCS, and polystyrene (PS) MPs onto the CS sponges. The adsorption of DCF, TCS, and PS MPs involved multiple steps: surface diffusion and pore diffusion of the sponge. The adsorption isotherms demonstrated that Langmuir model was the most fitted well model to explain adsorption of TCS (qm = 7.08 mg/g) and PS MPs (qm = 7.42 mg/g) on GO5/CS/GP sponge, while Freundlich model suited for DCF adsorption (qm = 48.58 mg/g). DCF adsorption was thermodynamically spontaneous and endothermic; however, the adsorption of TCS and PS MPs was exothermic (283-313 K). The optimal pH was 5.5-7 due to the surface charge of the GO5/CS/GP sponge (pHzpc = 5.76) and ionization of DCF, TCS, and PS MPs. As the salinity increased, DCF removal efficiency drastically decreased due to the weakening of electrostatic interactions; however, TCS removal efficiency remained stable because TCS adsorption was mainly caused by hydrophobic and π-π interactions rather than electrostatic interaction. The removal of PS MPs was enhanced by the electrostatic screening effects of high Na+ ions. PS nanoplastics (average size = 26 nm) were removed by the GO5/CS/GP sponge at a rate of 73.0%, which was better than that of PS MPs (41.5%). In addition, the GO5/CS/GP sponge could be recycled over five adsorption-desorption cycles.

Adsorption and leaching of fluorotelomer compounds and perfluoroalkyl acids in aqueous media by activated carbon prepared from municipal biosolids

Perfluoroalkyl acids (PFAAs) are ubiquitous in nature and pose serious health risks to humans and animals. Limiting PFAA exposure requires novel technology for their effective removal from water. We investigated the efficacy of biosolid-based activated carbon (Bio-SBAC) in removing frequently detected PFAAs and their precursor fluorotelomer compounds at environmentally relevant concentrations (∼50 μg/L). Batch experiments were performed to investigate adsorption kinetics, isotherms, and leachability. Bio-SBAC achieved >95% removal of fluorotelomeric compounds, indicating that the need for PFAA removal from the environment could be minimised if the precursors were targeted. Kinetic data modelling suggested that chemisorption is the dominant PFAA adsorption mechanism. As evidenced by the isotherm modelling results, Freundlich adsorption intensity, n-1, values of <1 (0.707-0.938) indicate chemisorption. Bio-SBAC showed maximum capacities for the adsorption of perfluorooctanoic acid (1429 μg/g) and perfluorononanoic acid (1111 μg/g). Batch desorption tests with 100 mg/L humic acid and 10 g/L NaCl showed that Bio-SBAC effectively retained the adsorbed PFAA with little or no leaching, except perfluorobutanoic acid. Overall, this study revealed that Bio-SBAC is a value-added material with promising characteristics for PFAA adsorption and no leachability. Additionally, it can be incorporated into biofilters to remove PFAAs from stormwater, presenting a sustainable approach to minimise biosolid disposal and improve the quality of wastewater before discharge into receiving waters.

Emerging organic contaminants in drinking water systems: Human intake, emerging health risks, and future research directions

Few earlier reviews on emerging organic contaminants (EOCs) in drinking water systems (DWS) focused on their detection, behaviour, removal and fate. Reviews on multiple exposure pathways, human intake estimates, and health risks including toxicokinetics, and toxicodynamics of EOCs in DWS are scarce. This review presents recent advances in human intake and health risks of EOCs in DWS. First, an overview of the evidence showing that DWS harbours a wide range of EOCs is presented. Multiple human exposure to EOCs occurs via ingestion of drinking water and beverages, inhalation and dermal pathways are discussed. A potential novel exposure may occur via the intravenous route in dialysis fluids. Analysis of global data on pharmaceutical pollution in rivers showed that the cumulative concentrations (μg L-1) of pharmaceuticals (mean ± standard error of the mean) were statistically more than two times significantly higher (p = 0.011) in South America (11.68 ± 5.29), Asia (9.97 ± 3.33), Africa (9.48 ± 2.81) and East Europe (8.09 ± 4.35) than in high-income regions (2.58 ± 0.48). Maximum cumulative concentrations of pharmaceuticals (μg L-1) decreased in the order; Asia (70.7) had the highest value followed by South America (68.8), Africa (51.3), East Europe (32.0) and high-income regions (17.1) had the least concentration. The corresponding human intake via ingestion of untreated river water was also significantly higher in low- and middle-income regions than in their high-income counterparts. For each region, the daily intake of pharmaceuticals was highest in infants, followed by children and then adults. A critique of the human health hazards, including toxicokinetics and toxicodynamics of EOCs is presented. Emerging health hazards of EOCs in DWS include; (1) long-term latent and intergenerational effects, (2) the interactive health effects of EOC mixtures, (3) the challenges of multifinality and equifinality, and (4) the Developmental Origins of Health and Disease hypothesis. Finally, research needs on human health hazards of EOCs in DWS are presented.

Trace organic contaminants in lake waters: Occurrence and environmental risk assessment at the national scale in Canada

Numerous contaminants are produced and used daily, a significant fraction ultimately finding their way into natural waters. However, data on their distribution in lakes is lacking. To address this gap, the presence of 54 trace organic contaminants (TrOCs), representative of various human activities, was investigated in the surface water of 290 lakes across Canada. These lakes ranged from remote to highly impacted by human activities. In 88% of the sampled lakes, contaminants were detected, with up to 28 detections in a single lake. The compounds most frequently encountered were atrazine, cotinine, and deethylatrazine, each of which was present in more than a third of the lakes. The range of detected concentrations was from 0.23 ng/L to about 2200 ng/L for individual compounds, while the maximum cumulative concentration exceeded 8100 ng/L in a single lake. A risk assessment based on effect concentrations for three aquatic species (Pimephales promelas, Daphnia magna, and Tetrahymena pyriformis) was conducted, revealing that 6% of lakes exhibited a high potential risk for at least one species. In 59% of lakes, some contaminants with potential sub-lethal effects were detected, with the detection of up to 17 TrOCs with potential impacts. The results of this work provide the first reference point for monitoring the evolution of contamination in Canadian lakes by TrOCs. They demonstrate that a high proportion of the sampled lakes bear an environmentally relevant anthropogenic chemical footprint.

Occurrence, removal efficiency, and emission of antibiotics in the sewage treatment plants of a low-urbanized basin in China and their impact on the receiving water

Sewage treatment plants (STPs) are primary sources of antibiotics in aquatic environments. However, limited research has been conducted on antibiotic attenuation in STPs and their downstream waters in low-urbanized areas. This study analyzed 15 antibiotics in the STP sewage and river water in the Zijiang River basin to quantify antibiotic transport and attenuation in the STPs and downstream. The results showed that 14 target antibiotics, except leucomycin, were detected in the STP sewage, dominated by amoxicillin (AMOX), ofloxacin, and roxithromycin. The total antibiotic concentration in the influent and effluent ranged from 158 to 1025 ng/L and 99.9 to 411 ng/L, respectively. The removal efficiency of total antibiotics ranged from 54.7 % to 75.7 % and was significantly correlated with total antibiotic concentration in the influent. The antibiotic emission from STPs into rivers was 78 kg/yr and 4.6 g/km2yr in the Zijiang River basin. The total antibiotic concentration downstream of the STP downstream was 23.6 to 213 ng/L and was significantly negatively correlated with the transport distance away from the STP outlets. Antibiotics may pose a high ecological risk to algae and low ecological risk to fish in the basin. The risk of AMOX and ciprofloxacin resistance for organisms in the basin was estimated to be moderate. This study established antibiotic removal and attenuation models in STPs and their downstream regions in a low-urbanized basin, which is important for simulating antibiotic transport in STPs and rivers worldwide.

Analysis of pharmacokinetic profile and ecotoxicological character of cefepime and its photodegradation products

An important problem is the impact of photodegradation on product toxicity in biological tests, which may be complex and context-dependent. Previous studies have described the pharmacology of cefepime, but the toxicological effects of its photodegradation products remain largely unknown. Therefore, photodegradation studies were undertaken in conditions similar to those occurring in biological systems insilico, in vitro, in vivo and ecotoxicological experiments. The structures of four cefepime photodegradation products were determined by UPLC-MS/MS method. The calculated in silico ADMET profile indicates that carcinogenic potential is expected for compounds CP-1, cefepime, CP-2 and CP-3. The Cell Line Cytomotovity Predictor 2.0 tool was used to predict the cytotoxic effects of cefepime and related compounds in non-transformed and cancer cell lines. The results indicate that possible actions include: non-small cell lung cancer, breast adenocarcinoma, prostate cancer and papillary renal cell carcinoma. OPERA models were used to predict absorption, distribution, metabolism and excretion (ADME) endpoints, and potential bioactivity of CP-2, cefepime and CP-4. The results obtained in silico show that after 96h of exposure, cefepime, CP-1, CP-2, and CP-3 are moderately toxic in the zebrafish model, while CP-4 is highly toxic. On the contrary, cefepime is more toxic to T. platyurus (highly toxic) compared to the zebrafish model, similar to products CP-4, CP-3 and CP-2. In vitro cytotoxicity studies were performed by MTT assay and in vivo acute embryo toxicity studies using Danio rerio embryos and larvae. In vitro showed an increase in the cytotoxicity of products with the longest exposure period i.e. for 8 h. Additionally, at a concentration of 200 μg/mL, statistically significant changes in metabolic activity were observed depending on the irradiation time. In vivo studies conducted with Zebrafish showed that both cefepime and its photodegradation products have only low toxicity. Assessment of potential ecotoxicity included Microbiotests on invertebrates (Thamnotoxkit F and Daphtoxkit F), and luminescence inhibition tests (LumiMara). The observed toxicity of the tested solutions towards both Thamnocephalus platyurus and Daphnia magna indicates that the parent substance (unexposed) has lower toxicity, which increases during irradiation. The acute toxicity (Lumi Mara) of nonirradiated cefepime solution is low for all tested strains (<10%), but mixtures of cefepime and its photoproducts showed growth inhibition against all tested strains (except #6, Photobacterium phoreum). Generally, it can be concluded that after UV-Vis irradiation, the mixture of cefepime phototransformation products shows a significant increase in toxicity.

Current strategies on bioremediation of personal care products and detergents: Sustainability and life cycle assessment

The increased use of personal care products and detergents in modern society has raised concerns about their potential adverse effects on the environment. These products contain various chemical compounds that can persist in water bodies, leading to water pollution and ecological disturbances. Bioremediation has emerged as a promising approach to address these challenges, utilizing the natural capabilities of microorganisms to degrade or remove these contaminants. This review examines the current strategies employed in the bioremediation of personal care products and detergents, with a specific focus on their sustainability and environmental impact. This bioremediation is essential for environmental rejuvenation, as it uses living organisms to detergents and other daily used products. Its distinctiveness stems from sustainable, nature-centric ways that provide eco-friendly solutions for pollution eradication and nurturing a healthy planet, all while avoiding copying. Explores the use of microbial consortia, enzyme-based treatments, and novel biotechnological approaches in the context of environmental remediation. Additionally, the ecological implications and long-term sustainability of these strategies are assessed. Understanding the strengths and limitations of these bioremediation techniques is essential for developing effective and environmentally friendly solutions to mitigate the impact of personal care products and detergents on ecosystems.

Nontarget screening analysis of organic compounds in river sediments: a case study in the Taipu River of the Yangtze River Delta Region in China

Sediments are the vital fate of organic compounds, and the recognition of organic compounds in sediments is constructive in providing comprehensive and long-term information. In this study, a three-step nontarget screening (NTS) analysis workflow using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC × GC-TOFMS) revealed the extensive existence of organic compounds in the Taipu River sediment. Organic compounds (705) were detected and divided into four structure-related groups or eight use-related classes. In the Taipu River's mainstream, a significant difference was found in the composition profiles of the identified organic compounds among various sites, demonstrating the organic compounds were more abundant in the midstream and downstream than in the upstream. Meanwhile, the hydrodynamic force was recognized as a potential factor influencing organic compounds' occurrence. Based on multiple statistical analyses, the shipping and textile printing industries were considered the significant contributors to the identified organic compounds. Considering the principles of the priority substances and the current status of the substances, two traditional pollutants and ten emerging organic compounds were recognized as the priority organic compounds for the Taipu River. Conclusively, this study established a workflow for NTS analysis of sediment samples and demonstrated the necessity of NTS analysis to evaluate the impact of terrestrial emissions of organic compounds on the aquatic environment.

Synthesis, characterization, and environmental applications of graphene-coated sand: A review

Global water quality has deteriorated, leaving over 844 million individuals without access to clean drinking water. While sand filters (SF) offer a solution, their limited surface area and adsorption capacity for emerging contaminants remain a challenge. This has prompted the development of new materials such as graphene-coated sand (GCS) to enhance the sand's adsorptive properties. Notably, GCS also possesses inherent anti-bacterial properties and can function as a photocatalyst when exposed to UV and visible light, offering enhanced water purification. This manuscript 1) reviews the synthesis of GCS, detailing the characterization techniques employed to understand its structure, composition, and multifunctional properties and 2) highlights the superior efficacy of GCS in removing contaminants, including metals (>95 % removal of Cd2+, Pb2+, Zn2+, and Cu2+ in low pH environment), sulfides (full removal compared to 26 % removal by raw sand), antibiotics (98 % removal of tetracycline), and bacteria (complete cell membrane destruction), compared to traditional SF. Due to its enhanced performance and multifaceted purification capabilities, GCS presents a promising alternative to SFs, especially in developing countries, aiming to improve water quality and ensure safe drinking water access. To the best of our knowledge, no other work groups the available research on GCS. Furthermore, future research directions should focus on reducing the overall production cost of GCS, exploring surface modification techniques, and expanding the range of contaminants tested by GCS, to fully realize its potential in water purification.

Occurrence profiling, risk assessment, and correlations of antimicrobials in surface water and groundwater systems in Southwest Nigeria

The presence of antimicrobials in water has grown into a major global health concern. This study thus focused on the presence, ecological implications, and potential health risks associated with nine antimicrobials: five antibiotics (ampicillin, chloramphenicol, ciprofloxacin, metronidazole, and tetracycline) and four parabens (methylparaben, ethylparaben, propylparaben, and butylparaben) in surface water and groundwater samples collected from three Southwestern States in Nigeria (Osun, Oyo, and Lagos States). These antimicrobials were widely detected across the three States with ciprofloxacin being the most dominant having maximum average concentrations of 189 μg L-1 and 319 μg L-1 in surface water and groundwater respectively. The range of average concentrations of antibiotics in surface water are 47.3-235 μg L-1 (Osun), 27.9-166 μg L-1 (Oyo) and 52.1-159 μg L-1 (Lagos). For groundwater, it is 35.3-180 μg L-1 (Osun), 26.5-181 μg L-1 (Oyo) and 32.3-319 μg L-1 (Lagos). The average concentrations of all parabens were 32.4-153 μg L-1, 53.4-80.1 μg L-1, and 83.2-132 μg L-1 for surface water and 46.7-55.7 μg L-1, 53-117 μg L-1, and 62.4-118 μg L-1 for groundwater in Osun, Oyo, and Lagos States respectively. Methylparaben was most frequently detected paraben with average concentrations of 153 μg L-1 and 117 μg L-1 in surface water and groundwater respectively. The measured environmental concentrations of these antimicrobials pose a significant ecological risk while those of ciprofloxacin and ampicillin pose a high health risk to all population groups studied. The average concentrations of antibiotics investigated in this study exceeded their threshold values for Predicted No-Effect Concentrations (PNEC) associated with resistance selection, except for tetracycline.

Pharmaceuticals and Personal Care Products in the Aquatic Environment: How Can Regions at Risk be Identified in the Future?

Pharmaceuticals and personal care products (PPCPs) are an indispensable component of a healthy society. However, they are well-established environmental contaminants, and many can elicit biological disruption in exposed organisms. It is now a decade since the landmark review covering the top 20 questions on PPCPs in the environment (Boxall et al., 2012). In the present study we discuss key research priorities for the next 10 years with a focus on how regions where PPCPs pose the greatest risk to environmental and human health, either now or in the future, can be identified. Specifically, we discuss why this problem is of importance and review our current understanding of PPCPs in the aquatic environment. Foci include PPCP occurrence and what drives their environmental emission as well as our ability to both quantify and model their distribution. We highlight critical areas for future research including the involvement of citizen science for environmental monitoring and using modeling techniques to bridge the gap between research capacity and needs. Because prioritization of regions in need of environmental monitoring is needed to assess future/current risks, we also propose four criteria with which this may be achieved. By applying these criteria to available monitoring data, we narrow the focus on where monitoring efforts for PPCPs are most urgent. Specifically, we highlight 19 cities across Africa, Central America, the Caribbean, and Asia as priorities for future environmental monitoring and risk characterization and define four priority research questions for the next 10 years. Environ Toxicol Chem 2024;43:575-588. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Molecular interactions of paraben family of pollutants with embryonic neuronal proteins of Danio rerio: A step ahead in computational toxicity towards adverse outcome pathway

The paraben family of endocrine disruptors exhibit persistent behaviours in aquatic matrices, having bio-accumulative effects and necessitating toxicity analysis and safe use, as well as prevention of food web penetration. In this study, the toxicity effects of 9 different parabens (Methyl, Ethyl, Propyl, Butyl, Heptyl, Isopropyl, Isobutyl, benzyl parabens and p-hydroxybenzoic acid) were studied against 17 neuronal proteins (Neurog1, Ascl1a, DLA, Syn2a, Ntn1a, Pitx2, and SoxB1, Her/Hes, Zic family) expressed during the early embryonic developmental stage of Danio rerio. The neuronal genes were selected as a biomarker to study the inhibitory effects on the cascade of genes expressed in the early developmental stage. The study uses trRossetta software to predict protein structures of neuronal genes, followed by structural refinement, energy minimisation, and active site prediction, evaluated using energy value, RC plot and ERRAT scores of PROCHECK and ERRAT programs. Compared to raw structures, highly confident predicted structures and quality scores were observed for refined protein with few exceptions. Based on the polarity and charge of the aminoacids, the probable pockets were identified using active site prediction, which were then used for molecular docking analysis. Further, the ADMET analysis, ligand likeliness and toxicological test revealed the paraben family of compounds as one of the most susceptible toxic and mutagenic compounds. The molecular docking results showed an interesting pattern of increasing binding affinity with increase in the carbon chains of paraben molecules. Benzyl Paraben showed higher binding affinities across all 17 neuronal proteins. Finally, gene co-occurrence/co-expression and protein-protein interaction studies using the STRING database depict that all proteins are functionally related and play essential roles in standard biological processes or pathways, conserved and expressed in diverse organisms. The interaction between paraben compounds and neuronal genes indicates high risks of inhibiting reactions in embryonic stages, emphasising the need for effective treatment measures and strict regulations.

Synthesis and characterization of TiO2-based supported materials for industrial application and recovery in a pilot photocatalytic plant using chemometric approach

In this contribution, the performance of powdered titanium dioxide (TiO2)-based photocatalysts was evaluated in a pilot photocatalytic plant for the degradation of different dyes, with an investigated volume of 1 L and solar simulated light as irradiation source. Five different samples, synthesized in our laboratories, were tested in the pilot plant, each consisting of TiO2 nanoparticles (NPs) coupled with a different material (persistent luminescent material and semiconductor material) and treated in different thermal conditions. All synthesized samples have been subjected to X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller analysis (BET), and transmission electron microscopy (TEM) characterization, to shed light on the influence of introducing other materials on titania characteristics. To study and evaluate the significance of the parameters affecting the process in the pilot plant, a chemometric approach was applied, by selecting a mathematical model (D-Optimal) to simultaneously monitor a large number of variables (i.e., 7), both qualitative and quantitative, over a wide range of levels. At the same time, the recovery of the synthesized photocatalysts was studied following a novel promising recuperation method, i.e., annulling the surface charge of the suspended samples by reaching the isoelectric point (pHPZC) of each sample, for the quantitative precipitation of TiO2 nanoparticles.

Effective treatment of petroleum oil-contaminated wastewater using activated sludge modified with magnetite/silicon nanocomposite

The study aimed to optimize the treatment of oil refinery-contaminated wastewater through modification of the well-established activated sludge process with new nanocomposite (NC) materials to produce high-quality treated effluents for potential reuse. Refinery wastewater samples were collected from one of the major oil refineries, Alexandria, Egypt, where the operation, performance, and efficiency of the current activated sludge (AS) unit were evaluated for 6 consecutive months. Two AS bench scale PVC basins were constructed. Magnetite nanoparticles (Fe3O4 NPs) and magnetite silica (Fe3O4/silica) nanocomposite (NC) were prepared and characterized. Bioremediation trials were carried out in a sequential batch mode using Fe3O4/silica NC-modified AS and control (unmodified AS). The proposed treatment produced high-quality effluents in a very short time (2 h) despite the very high initial pollutant concentration accompanied with a reduction in the produced sludge. The highest removal of TSS, TDS, BOD, COD, and OG from raw industrial wastewater recorded 78.33, 3.6, 87.65, 85.17, and 92.92% compared to 55.3, 12.6, 50.0, 40.22, and 56.84%, respectively, achieved by the unmodified AS unit. The results confirmed that integration of the AS treatment with nanomaterial composite is highly effective, promising, and economic for the treatment of highly toxic and complicated industrial wastewater such as petroleum refinery effluents.

Visible light-driven oxidation of non-native substrate by laccase attached on Ru-based metal-organic frameworks

Light-induced electron transfer can broaden the substrate range of metalloenzyme. However, the efficiency of photo-enzyme coupling is limited by the poor combination of photosensitizer or photocatalyst with enzyme. Herein, we prepared the nano-photocatalyst MIL-125-NH2@Ru(bpy) by in site embedding ruthenium pyridine-diimine complex [Ru(bpy)3]2+ into metal organic frameworks MIL-125-NH2 and associated it with multicopper oxidase (MCO) laccase. Compared to [Ru(bpy)3]2+, the coupling efficiency of MIL-125-NH2@Ru(bpy)3 for enzymatic oxygen reduction increased by 35.7%. A series of characterizations confirmed that the amino group of laccase formed chemical bonds with the surface defects or hydrophobic groups of MIL-125-NH2@Ru(bpy)3. Consequently, the tight binding accelerated the quenching process and electron transfer between laccase and the immobilized ruthenium pyridine-diimine complex. This work would open an avenue for the synthesis of MOFs photocatalyst towards photo-enzyme coupling.

Removal characteristics of 53 micropollutants during ozonation, chlorination, and UV/H2O2 processes used in drinking water treatment plant

The removal of 53 emerging micropollutants (MPs), including 10 per- and polyfluorinated substances (PFASs), 25 pharmaceuticals and personal care products (PPCPs), 7 pesticides, 5 endocrine disrupters (EDCs), 3 nitrosamines, and 3 taste and odor compounds (T&Os), by chlorination, ozonation, and UV/H2O2 treatment was examined in deionized water and surface waters used as the raw waters in drinking water treatment plants (DWTPs) in South Korea. The UV/H2O2 treatment was effective in the removal of most MPs, whereas chlorination was selectively effective for 19 MPs, including EDCs (>70 %). MPs containing aromatic ring with electron-donating functional group, or primary and secondary amines were effectively removed by chlorination immediately upon reaction initiation. The removal of MPs by ozonation was generally lower than that of the other two processes at a low ozone dose (1 mg L-1), but higher than chlorination at a high ozone dose (3 mg L-1), particularly for 16 MPs, including T&Os. Compared in deionized water, the removals of MPs in the raw water samples were lower in all three processes. The regression models predicting the rate constants (kobs) of 53 MPs showed good agreement between modeled and measured value for UV/H2O2 treatment (R2 = 0.948) and chlorination (R2 = 0.973), despite using only dissolved organic carbon (DOC) and oxidant concentration as variables, whereas the ozonation model showed a variation (R2 = 0.943). Our results can provide the resources for determining which oxidative process is suitable for treating specific MPs present in the raw waters of DWTPs.

Personal care products in soil-plant and hydroponic systems: Uptake, translocation, and accumulation

Personal care products (PCPs) are organic compounds that are incorporated in several daily life products, such as shampoos, lotions, perfumes, cleaning products, air fresheners, etc. Due to their massive and continuous use and because they are not routinely monitored in the environment, these compounds are considered emerging contaminants. In fact, residues of PCPs are being discharged into the sewage system, reaching wastewater treatment plants (WWTPs), where most of these compounds are not completely degraded, being partially released into the environment via the final effluents and/or accumulating in the sewage sludges. Environmental sustainability is nowadays one of the main pillars of society and the application of circular economy models, promoting the waste valorisation, is increasingly encouraged. Therefore, irrigation with reclaimed wastewater or soil fertilization with sewage sludge/biosolids are interesting solutions. However, these practices raise concerns due to the potential risks associated to the presence of hazardous compounds, including PCPs. When applied to agricultural soils, PCPs present in these matrices can contaminate the soil or be taken up by crops. Crops can therefore become a route of exposure for humans and pose a risk to public health. However, the extent to which PCPs are taken up and bioaccumulated in crops is highly dependent on the physicochemical properties of the compounds, environmental variables, and the plant species. This issue has attracted the attention of scientists in recent years and the number of publications on this topic has rapidly increased, but a systematic review of these studies is lacking. Therefore, the present paper reviews the uptake, accumulation, and translocation of different classes of PCPs (biocides, parabens, synthetic musks, phthalates, UV-filters) following application of sewage sludge or reclaimed water under field and greenhouse conditions, but also in hydroponic systems. The factors influencing the uptake mechanism in plants were also discussed.

Methylation and Demethylation of Emerging Contaminants in Plants

Many contaminants of emerging concern (CECs) have reactive functional groups and may readily undergo biotransformations, such as methylation and demethylation. These transformations have been reported to occur during human metabolism and wastewater treatment, leading to the propagation of CECs. When treated wastewater and biosolids are used in agriculture, CECs and their transformation products (TPs) are introduced into soil-plant systems. However, little is known about whether transformation cycles, such as methylation and demethylation, take place in higher plants and hence affect the fate of CECs in terrestrial ecosystems. In this study, we explored the interconversion between four common CECs (acetaminophen, diazepam, methylparaben, and naproxen) and their methylated or demethylated TPs in Arabidopsis thaliana cells and whole wheat seedlings. The methylation-demethylation cycle occurred in both plant models with demethylation generally taking place at a greater degree than methylation. The transformation rate of demethylation or methylation was dependent on the bond strength of R-CH3, with demethylation of methylparaben or methylation of acetaminophen being more pronounced. Although not explored in this study, these interconversions may exert influences on the behavior and biological activity of CECs, particularly in terrestrial ecosystems. The study findings demonstrated the prevalence of transformation cycles between CECs and their methylated or demethylated TPs in higher plants, contributing to a more complete understanding of risks of CECs in the human-wastewater-soil-plant continuum.

Response of lipid metabolism, energy supply, and cell fate in yellowstripe goby (Mugilogobius chulae) exposed to environmentally relevant concentrations atorvastatin

The usage of typical pharmaceuticals and personal care products (PPCPs) such as cardiovascular and lipid-modulating drugs in clinical care accounts for the largest share of pharmaceutical consumption in most countries. Atorvastatin (ATV), one of the most commonly used lipid-lowering drugs, is frequently detected with lower concentrations in aquatic environments owing to its wide application, low removal, and degradation rates. However, the adverse effects of ATV on non-target aquatic organisms, especially the molecular mechanisms behind the toxic effects, still remain unclear. Therefore, this study investigated the potentially toxic effects of ATV exposure (including environmental concentrations) on yellowstripe goby (Mugilogobius chulae) and addressed the multi-dimensional responses. The results showed that ATV caused typical hepatotoxicity to M. chulae. ATV interfered with lipid metabolism by blocking fatty acid β-oxidation and led to the over-consumption of lipids. Thus, the exposed organism was obliged to alter the energy supply patterns and substrates utilization pathways to keep the normal energy supply. In addition, the higher concentration of ATV exposure caused oxidative stress to the organism. Subsequently, M. chulae triggered the autophagy and apoptosis processes with the help of key stress-related transcriptional regulators FOXOs and Sestrins to degrade the damaged organelles and proteins to maintain intracellular homeostasis.

Accelerating the environmental applications of black phosphorus: A review

Since its rediscovery in 2014, layered black phosphorus (BP) has received extensive attention as a new two-dimensional semiconductor. BP is a promising material with properties of a large surface-to-volume ratio, wide light absorption range, tunable band gap, and high charge carrier mobility. These unique characteristics of BP make it a promising contender for various applications, particularly in the realm of environmental applications. This literature review provides a comprehensive discussion and overview of the latest developments in utilizing BP for environmental purposes. The review starts with the applications of BP in photocatalysis including photodegradation of refractory pollutants, H2 evolution reaction (HER), and reduction of CO2 and N2. In the following section, Environmental electrocatalysis of HER and N2 reduction reaction (NRR) is discussed. In addition, BP-based environmental sensing (detection of heavy metal ions, antibiotics, mycotoxins, NOx) and eco-friendly halogen-free flame retardant are summarized as well. Finally, a thorough comprehension of the current state and potential future trends of BP-based nanomaterials for various environmental applications are presented.

Toxic effects of environmentally relevant concentrations of naproxen exposure on Daphnia magna including antioxidant system, development, and reproduction

Naproxen (NPX) is one of common non-prescription non-steroidal anti-inflammatory drugs (NSAIDs) which is widely detected in aquatic environments worldwide due to its high usage and low degradation. NPX exerts anti-inflammatory and analgesic pharmacological effects through the inhibition of prostaglandin-endoperoxide synthase (PTGS), also known as cyclooxygenase (COX). Given its evolutionarily relatively conserved biological functions, the potential toxic effects of NPX on non-target aquatic organisms deserve more attention. However, the ecotoxicological studies of NPX mainly focused on its acute toxic effects under higher concentrations while the chronic toxic effects under realistic concentrations exposure, especially for the underlying molecular mechanisms still remain unclear. In the present study, Daphnia magna, being widely distributed in freshwater aquatic environments, was selected to investigate the toxic effects of environmentally relevant concentrations of NPX via determining the response of the Nrf2/Keap1 signaling pathway-mediated antioxidant system in acute exposure, as well as the changes in life-history traits, such as growth, reproduction, and behavior in chronic exposure. The results showed that the short-term exposure to NPX (24 h and 48 h) suppressed ptgs2 expression while activating Nrf2/Keap1 signaling pathway and its downstream antioxidant genes (ho-1, sod, cat and trxr). However, with prolonged exposure to 96 h, the opposite performance was observed, the accumulation of malondialdehyde (MDA) indicated that D. magna suffered from severe oxidative stress. To maintain homeostasis, the exposed organism may trigger ferroptosis and apoptosis processes with the help of Silent mating type information regulation 2 homologs (SIRTs). The long-term chronic exposure to NPX (21 days) caused toxic effects on D. magna at the individual and population levels, including growth, reproduction and behavior, which may be closely related to the oxidative stress induced by the drug. The present study suggested that more attention should be paid to the ecological risk assessment of NSAIDs including NPX on aquatic non-target organisms.

Emerging pollutants in etiology and pathophysiology of polycystic ovary syndrome

Polycystic ovary syndrome (PCOS) is a multifactorial endocrine disorder affecting reproductive-aged women worldwide. Although genetic and lifestyle factors have been implicated in its etiology, emerging evidence suggests that exposure to environmental pollutants may also contribute significantly to the development and pathophysiology of PCOS. This review article aims to provide a comprehensive overview of the potential role of emerging pollutants, including pharmaceuticals and personal care products (PPCPs), microplastics, endocrine disruptors, and nanoparticles, in PCOS development. The article summarizes the current understanding of PCOS pathogenesis and its clinical manifestations. Subsequently, it delves into the mechanisms of action of the emerging pollutants, exploring how they may disrupt the endocrine system, interfere with hormonal regulation, and contribute to the manifestation of PCOS symptoms. Moreover, the potential for cumulative effects and synergistic interactions between these pollutants demands a cautious approach when considering their role in PCOS etiology.

Performance of an anaerobic-oxic-anoxic (AOA) system in the simultaneous removal of nutrients and triclosan and bacterial community

The constant presence of triclosan (TCS) in surface water and wastewater has been verified due to its application in several pharmaceutical and personal care products. Thus, removing this emerging contaminant is essential to minimize the contamination of water bodies. The anaerobic-aerobic-anoxic (AOA) system is an innovative alternative that combines the removal of nutrients and triclosan. This study focuses on the simultaneous removal of carbonaceous matter, nitrogen, phosphorus, and triclosan in a continuous pilot-scale AOA system from synthetic wastewater. The upflow system, in series, was operated at hydraulic retention time (HRT) of 8 h and a flowrate of 2.40 L h-1. Glucose (190 mg L-1) was added to the anoxic reactor as the external carbon source. Besides that, bacterial community structure was investigated using 16S rRNA sequencing in each reactor. The system achieved average removal efficiencies of 96% (14.03 g d-1) for Chemical Oxygen Demand (COD), 85% (2.64 g d-1) for Total Kjeldahl Nitrogen (TKN), 88% (1.40 g d-1) for Total Ammonia Nitrogen (TAN), 20% (0.12 g d-1) for Total Phosphorus (TP), and 93% (1.87 μg d-1) for Triclosan (TCS). The phyla Proteobacteria, Firmicutes, Bacteroidetes, and Chloroflexi were found in greater abundance. The main genera identified were Anaeromusa, Aeromonas, Azospira, Clostridium, and Lactococcus. The organisms related to phylum and genus corroborate the involved processes and the removal performance achieved. In addition, Lactococcus, Thermomonas, Ferruginibacter, and Dechloromonas were involved in triclosan biodegradation. The anaerobic-oxic-anoxic system successfully removed carbonaceous, nitrogenous matter, and triclosan, with glucose increasing the denitrifying activity.

Comparative removal of pharmaceuticals in aqueous phase by agricultural waste-based biochars

The intensification of pharmaceutical use globally has led to an increase in the number of water bodies contaminated by drugs, and an effective strategy must be developed to address this issue. In this work, several biochars produced from Miscanthus straw pellets (MSP550, MSP700) and wheat straw pellets (WSP550, WSP700) at 550 and 700°C, respectively, were selected as adsorbents for removing various pharmaceuticals, such as pemetrexed (PEME), sulfaclozine (SCL), and terbutaline (TBL), from the aqueous phase. The biochar characterizations (physicochemical properties, textural properties, morphological structures, and zeta potentials) and adsorptive conditions (contact times, temperatures, and pH effect) were investigated. The infrared and Raman spectra of biochars before and after pharmaceutical adsorption, as well as quantum chemical computations, were carried out to explore the adsorption mechanisms. The results showed that the general adsorption abilities of biochars for pharmaceuticals were in the order of WSP700 > MSP700 > MSP550 > WSP550. Both the higher drug concentration and higher temperature improved biochar adsorption. By decreasing the pH, the adsorption amounts increased for PEME and SCL. However, TBL exhibited the best adsorption at pH 7, whereas a weakening of affinity occurred at lower or higher pH values. Electrostatic interactions and hydrogen bonding were the main adsorptive mechanisms between all biochars and pharmaceuticals. π-π interactions played a role in the adsorption process of low-temperature-prepared biochars (MSP550 and WSP550). This work can provide new insights into the control of pharmaceuticals from water with low-cost adsorbents. PRACTITIONER POINTS: Use of biochars for pharmaceuticals removal from aqueous phase. Characterization of biochars : physical and chemical properties, textural and surface properties. Simulation calculation for characterization of pharmaceuticals. Kinetic studies of pharmaceuticals adsorption on biochars. DRIFTS and Raman analysis for the understanding of adsorption process.

Fate of pharmaceuticals in the Ebro River Delta region: The combined evaluation of water, sediment, plastic litter, and biomonitoring

The increasing consumption of pharmaceuticals, alongside their limited removal in wastewater treatment plants (WWTPs), have led to their ubiquitous occurrence in receiving aquatic environments. This study addresses the occurrence of 68 pharmaceuticals (PhACs) in the Ebro River Delta region (NE Spain), as well as their distribution in different environmental compartments, including surface water, sediments, biota (river biofilm and fish tissues), and field-collected plastic litter. In addition, their concentrations in serving WWTPs, as possible sources of environmental contamination, were also determined. Our study confirmed the widespread occurrence of PhACs in riverine and, to a more limited extent, coastal environments. Most frequently detected PhACs belonged to analgesics/anti-inflammatories (e.g., ibuprofen) and psychiatric drugs (e.g., venlafaxine) therapeutic groups, followed by antihypertensives (e.g., valsartan) and antibiotics (e.g., azithromycin). Seasonal differences in cumulative levels of PhACs were reported for water and sediments (winter>summer). Despite spatial gradients were not clear along the river, a non-negligible contribution of upstream Ebro sites (reference area) was highlighted, which was unexpected based on the low anthropogenic pressure. Sediments represented a minor attenuation pathway for the selected PhACs, whereas they were more heavily accumulated in biota: fish liver (up to 166 ng/g dw), river biofilms (up to 108 ng/g dw), fish plasma (up to 63 ng/mL), and fish muscle (up to 31 ng/g dw). These findings highlight the importance of biomonitoring in the characterization of polluted areas and prioritization of hazardous substances (e.g., psychiatric drugs) in aquatic systems, and a particular interest of fish plasma as non-destructive biomonitoring matrix. PhACs were also detected on plastic litter, demonstrating their role as environmental sinks for certain PhACs (e.g., analgesics/anti-inflammatories, psychiatric drugs). Overall, the widespread detection of PhACs in a variety of biotic and abiotic matrices from the lower Ebro River and Delta warns about their possible environmental implications.

Physiological impact of personal care product constituents on non-target aquatic organisms

Personal care products (PCPs) are products used in cleaning, beautification, grooming, and personal hygiene. The rise in diversity, usage, and availability of PCPs has resulted in their higher accumulation in the environment. Thus, these constitute an emerging category of environmental contaminants due to the potential of its constituents (chemical and non-chemical) to induce various physiological effects even at lower concentrations (ng/L). For analyzing the impact of the PCPs constituents on the non-target organism about 300 article including research articles, review articles and guidelines were studied from 2000 to 2023. This review aims to firstly discuss the fate and accumulation of PCPs in the aquatic environment and organisms; secondly provides overview of environmental risks that are linked to PCPs; thirdly review the trends, current status of regulations and risks associated with PCPs and finally discuss the knowledge gaps and future perspectives for future research. The article discusses important constituents of PCPs such as antimicrobials, cleansing agents and disinfectants, fragrances, insect repellent, moisturizers, plasticizers, preservatives, surfactants, UV filters, and UV stabilizers. Each of them has been found to display certain toxic impact on the aquatic organisms especially the plasticizers and UV filters. These continuously and persistently release biologically active and inactive components which interferes with the physiological system of the non-target organism such as fish, corals, shrimps, bivalves, algae, etc. With a rise in the number of toxicity reports, concerns are being raised over the potential impacts of these contaminant on aquatic organism and humans. The rate of adoption of nanotechnology in PCPs is greater than the evaluation of the safety risk associated with the nano-additives. Hence, this review article presents the current state of knowledge on PCPs in aquatic ecosystems.

Proteomic analysis of the hepatic response to a pollutant mixture in mice. The protective action of selenium

Metals and pharmaceuticals contaminate water and food worldwide, forming mixtures where they can interact to enhance their individual toxicity. Here we use a shotgun proteomic approach to evaluate the toxicity of a pollutant mixture (PM) of metals (As, Cd, Hg) and pharmaceuticals (diclofenac, flumequine) on mice liver proteostasis. These pollutants are abundant in the environment, accumulate in the food chain, and are toxic to humans primarily through oxidative damage. Thus, we also evaluated the putative antagonistic effect of low-dose dietary supplementation with the antioxidant trace element selenium. A total of 275 proteins were affected by PM treatment. Functional analyses revealed an increased abundance of proteins involved in the integrated stress response that promotes translation, the inflammatory response, carbohydrate and lipid metabolism, and the sustained expression of the antioxidative response mediated by NRF2. As a consequence, a reductive stress situation arises in the cell that inhibits the RICTOR pathway, thus activating the early stage of autophagy, impairing xenobiotic metabolism, and potentiating lipid biosynthesis and steatosis. PM exposure-induced hepato-proteostatic alterations were significantly reduced in Se supplemented mice, suggesting that the use of this trace element as a dietary supplement may at least partially ameliorate liver damage caused by exposure to environmental mixtures.

Recent Advances on Electrochemical Sensors for Detection of Contaminants of Emerging Concern (CECs)

Contaminants of Emerging Concern (CECs), a new category of contaminants currently in the limelight, are a major issue of global concern. The pervasive nature of CECs and their harmful effects, such as cancer, reproductive disorders, neurotoxicity, etc., make the situation alarming. The perilous nature of CECs lies in the fact that even very small concentrations of CECs can cause great impacts on living beings. They also have a nature of bioaccumulation. Thus, there is a great need to have efficient sensors for the detection of CECs to ensure a safe living environment. Electrochemical sensors are an efficient platform for CEC detection as they are highly selective, sensitive, stable, reproducible, and prompt, and can detect very low concentrations of the analyte. Major classes of CECs are pharmaceuticals, illicit drugs, personal care products, endocrine disruptors, newly registered pesticides, and disinfection by-products. This review focusses on CECs, including their sources and pathways, health effects caused by them, and electrochemical sensors as reported in the literature under each category for the detection of major CECs.

Water, Water Everywhere, but Every Drop Unique: Challenges in the Science to Understand the Role of Contaminants of Emerging Concern in the Management of Drinking Water Supplies

The protection and management of water resources continues to be challenged by multiple and ongoing factors such as shifts in demographic, social, economic, and public health requirements. Physical limitations placed on access to potable supplies include natural and human-caused factors such as aquifer depletion, aging infrastructure, saltwater intrusion, floods, and drought. These factors, although varying in magnitude, spatial extent, and timing, can exacerbate the potential for contaminants of concern (CECs) to be present in sources of drinking water, infrastructure, premise plumbing and associated tap water. This monograph examines how current and emerging scientific efforts and technologies increase our understanding of the range of CECs and drinking water issues facing current and future populations. It is not intended to be read in one sitting, but is instead a starting point for scientists wanting to learn more about the issues surrounding CECs. This text discusses the topical evolution CECs over time (Section 1), improvements in measuring chemical and microbial CECs, through both analysis of concentration and toxicity (Section 2) and modeling CEC exposure and fate (Section 3), forms of treatment effective at removing chemical and microbial CECs (Section 4), and potential for human health impacts from exposure to CECs (Section 5). The paper concludes with how changes to water quantity, both scarcity and surpluses, could affect water quality (Section 6). Taken together, these sections document the past 25 years of CEC research and the regulatory response to these contaminants, the current work to identify and monitor CECs and mitigate exposure, and the challenges facing the future.

Developing a hybrid model for predicting the reaction kinetics between chlorine and micropollutants in water

Understanding the reactivities of chlorine towards micropollutants is crucial for assessing the fate of micropollutants in water chlorination. In this study, we integrated machine learning with kinetic modeling to predict the reaction kinetics between micropollutants and chlorine in deionized water and real surface water. We first established a framework to predict the apparent second-order rate constants for micropollutants with chlorine by combining Morgan molecular fingerprints with machine learning algorithms. The framework was tuned using Bayesian optimization and showed high prediction accuracy. It was validated through experiments and used to predict the unreported apparent second-order rate constants for 103 emerging micropollutants with chlorine. The framework also improved the understanding of the structure-dependence of micropollutants' reactivity with chlorine. We incorporated the predicted apparent second-order rate constants into the Kintecus software to establish a hybrid model to profile the time-dependent changes of micropollutant concentrations by chlorination. The hybrid model was validated by experiments conducted in real surface water in the presence of natural organic matter. The hybrid model could predict how much micropollutants were degraded by chlorination with varied chlorine contact times and/or initial chlorine dosages. This study advances fundamental understanding of the reaction kinetics between chlorine and emerging micropollutants, and also offers a valuable tool to assess the fate of micropollutants during chlorination of drinking water.

Role of the hydrolytic-acidogenic phase on the removal of bisphenol A and sildenafil during anaerobic treatment

This paper presents the main results of the removal of two pharmaceutical and personal care products (PPCPs), bisphenol A (BPA) and sildenafil (SDF), by applying anaerobic biological batch tests. The biomass used was previously acclimatized and the experiment lasted 28 days. The effect of factors such as compound (BPA and SDF), concentration and type of inoculum was assessed, considering the factorial experimental design. The results indicated that evaluated factors did not significantly affect the PPCPs elimination in the evaluated range with a confidence level of 95%. On the other hand, the removal percentages obtained with BPA were mainly related to mechanisms, such as sorption and abiotic reactions. Regarding SDF, biodegradation was the predominant mechanism of removal under the experimental conditions of this study; however, the degradation of SDF was partial, with percentages lower than 43% in the tests with hydrolytic/acidogenic inoculum (H/A) and lower than 41% in the tests with methanogenic inoculum (MET). Finally, these findings indicated that hydrolysis/acidogenesis phase is a main contributor to SDF biodegradation in anaerobic digestion. The study provides a starting point for future research that seeks to improve treatment systems to optimize the removal of pollutants from different water sources.

Contributions of Pharmaceuticals to DBP Formation and Developmental Toxicity in Chlorination of NOM-containing Source Water

Pharmaceuticals have been considered a priority group of emerging micropollutants in source waters in recent years, while their role in the formation and toxicity of disinfection byproducts (DBPs) during chlorine disinfection remains largely unclear. In this study, the contributions of natural organic matter (NOM) and pharmaceuticals (a mixture of ten representative pharmaceuticals) to the overall DBP formation and toxicity during drinking water chlorination were investigated. By innovatively "normalizing" chlorine exposure and constructing a kinetic model, we were able to differentiate and evaluate the contributions of NOM and pharmaceuticals to the total organic halogen (TOX) formation for source waters that contained different levels of pharmaceuticals. It was found that at a chlorine contact time of 1.0 h, NOM (2 mg/L as C) and pharmaceuticals (total 0.0062-0.31 mg/L as C) contributed 79.8-99.5% and 0.5-20.2%, respectively, of TOX. The toxicity test results showed that the chlorination remarkably increased the toxicity of the pharmaceutical mixture by converting the parent compounds into more toxic pharmaceutical-derived DBPs, and these DBPs might contribute significantly to the overall developmental toxicity of chlorinated waters. This study highlights the non-negligible role of pharmaceuticals in the formation and toxicity of overall DBPs in chlorinated drinking water.

Metallo-β-lactamases immobilized by magnetic zeolitic imidazolate frameworks-8 for degradation of β-lactam antibiotics in an aqueous environment

Residual antibiotics in nature are an important cause of antimicrobial drug resistance, and how to deal with residual β-lactam antibiotics in aqueous environments has become an urgent issue. In this work, magnetic zeolitic imidazolate frameworks-8 (ZIF-8) for immobilizing metallo-β-lactamases (MBLs), or Fe3O4@ZIF-8@MBLs, were successfully synthesized using the one-pot method in aqueous solution. The morphology and chemical structure of Fe3O4@ZIF-8@MBLs were characterized by scanning electron microscopy, energy dispersive spectra, X-ray diffraction, infrared spectra, physical adsorption, and zeta potential. Further, the degradation performance of Fe3O4@ZIF-8@MBLs for β-lactam antibiotics (penicillin G, cefoperazone, meropenem) in an aqueous environment was investigated by UV-visible absorption spectrophotometry. The results indicated that Fe3O4@ZIF-8@MBLs, compared to control ZIF-8, exhibited superior degradation ability, excellent reusability, and better stability under several harsh conditions. The strategy of combining ZIF-8 and MBLs to form magnetic porous polymers may be suitable for removing β-lactam antibiotics from an aqueous environment. This work provided an original insight into future studies on the degradation of β-lactam antibiotics employing MBLs immobilized by magnetic metal-organic frameworks.

Effects of wavelength on the treatment of contaminants of emerging concern by UV-assisted homogeneous advanced oxidation/reduction processes

Pollutants of emerging concern in aqueous environments present a significant threat to both the aquatic ecosystem and human health due to their rapid transfer. Among the various treatment approaches to remove those pollutants, UV-assisted advanced oxidation/reduction processes are considered competent and cost-effective. The treatment effectiveness is highly dependent on the wavelength of the UV irradiation used. This article systematically discusses the wavelength dependency of direct photolysis, UV/peroxides, UV/chlor(am)ine, UV/ClO2, UV/natural organic matter, UV/nitrate, and UV/sulfite on the transformation of contaminants. Altering wavelengths affects the photolysis of target pollutants, photo-decay of the oxidant/reductant, and quantum yields of reactive species generated in the processes, which significantly impact the degradation rates and formation of disinfection byproducts. In general, the degradation of contaminants is most efficient when using wavelengths that closely match the highest molar absorption coefficients of the target pollutants or the oxidizing/reducing agents, and the contribution of pollutant absorption is generally more significant. By matching the wavelength with the peak absorbance of target compounds and oxidants/reductants, researchers and engineers have the potential to optimize the UV wavelengths used in UV-AO/RPs to effectively remove pollutants and control the formation of disinfection byproducts.

Occurrence, fate, and potential risk of pharmaceutical pollutants in agriculture: Challenges and environmentally friendly solutions

In recent years, pharmaceutical active compounds (PhACs) have attained global prevalence. The behavior of PhACs in agricultural soils is complex and depends on several factors, such as the nature of the compounds and their physicochemical characteristics, which affect their fate and potential threats to human health, ecosystems, and the environment. The detection of residual pharmaceutical content is possible in both agricultural soils and environmental matrices. PhACs are commonly found in agricultural soil, with concentrations varying significantly, ranging from as low as 0.048 ng g-1 to as high as 1420.76 mg kg-1. The distribution and persistence of PhACs in agriculture can lead to the leaching of these toxic pollutants into surface water, groundwater, and vegetables/plants, resulting in human health risks and environmental pollution. Biological degradation or bioremediation plays a critical role in environmental protection and efficiently eliminates contamination by hydrolytic and/or photochemical reactions. Membrane bioreactors (MBRs) have been investigated as the most recent approach for the treatment of emerging persistent micropollutants, including PhACs, from wastewater sources. MBR- based technologies have proven to be effective in eliminating pharmaceutical compounds, achieving removal rates of up to 100%. This remarkable outcome is primarily facilitated by the processes of biodegradation and metabolization. In addition, phytoremediation (i.e., constructed wetlands), microalgae-based technologies, and composting can be highly efficient in remediating PhACs in the environment. The exploration of key mechanisms involved in pharmaceutical degradation has revealed a range of approaches, such as phytoextraction, phytostabilization, phytoaccumulation, enhanced rhizosphere biodegradation, and phytovolatilization. The well-known advanced/tertiary removal of sustainable sorption by biochar, activated carbon, chitosan, etc. has high potential and yields excellent quality effluents. Adsorbents developed from agricultural by-products have been recognized to eliminate pharmaceutical compounds and are cost-effective and eco-friendly. However, to reduce the potentially harmful impacts of PhACs, it is necessary to focus on advanced technologies combined with tertiary processes that have low cost, high efficiency, and are energy-saving to remove these emerging pollutants for sustainable development.

Wastewater reuse in agriculture: Prospects and challenges

Sustainable water recycling and wastewater reuse are urgent nowadays considering water scarcity and increased water consumption through human activities. In 2015, United Nations Sustainable Development Goal 6 (UN SDG6) highlighted the necessity of recycling wastewater to guarantee water availability for individuals. Currently, wastewater irrigation (WWI) of crops and agricultural land appears essential. The present work overviews the quality of treated wastewater in terms of soil microbial activities, and discusses challenges and benefits of WWI in line with wastewater reuse in agriculture and aquaculture irrigation. Combined conventional-advanced wastewater treatment processes are specifically deliberated, considering the harmful impacts on human health arising from WWI originating from reuse of contaminated water (salts, organic pollutants, toxic metals, and microbial pathogens i.e., viruses and bacteria). The comprehensive literature survey revealed that, in addition to the increased levels of pathogen and microbial threats to human wellbeing, poorly-treated wastewater results in plant and soil contamination with toxic organic/inorganic chemicals, and microbial pathogens. The impact of long-term emerging pollutants like plastic nanoparticles should also be established in further studies, with the development of standardized analytical techniques for such hazardous chemicals. Likewise, the reliable, long-term and extensive judgment on heavy metals threat to human beings's health should be explored in future investigations.

Study of the presence and environmental risk of organic contaminants policed by the European Union and other organic compounds in the water resources of a region overlapping protected areas: The Guadiaro River basin (southern Spain)

The study presented here is a first qualitative assessment of the occurrence of organic contaminants contemplated and not yet contemplated in European Union environmental legislation in water resources in the little anthropized Guadiaro River basin (70% of its area is covered by natural vegetation), in southern Spain. Water samples were collected from four carbonate aquifers, two detrital aquifers and four surface water courses and were analyzed for (i) 171 organic contaminants, (ii) major ions and (iii) stable isotopes (δ18OH2O, δ2HH2O, δ13CDIC). An environmental risk assessment was conducted through calculation of risk quotients comparing measured concentrations with ecotoxicological data found in the literature. Twenty-five organic contaminants were detected, at least once, including pesticides, pharmaceuticals, drugs of abuse and polycyclic aromatic hydrocarbons (PAHs). Cocaine and its main metabolite were detected in 85% and 95% of water samples, respectively (0.001-0.18 μg/L and 0.004-0.6 μg/L, respectively). Pyrene (PAH) was found in all water samples (0.001-0.015 μg/L) and forest fires were pointed out as a potential diffuse source. Relationship between rivers and aquifers is reflected by the distribution of organic contaminants, essentially the drugs of abuse. Concentration of contaminants were generally higher in groundwater samples, especially from detrital aquifers, potentially due to an accumulation process promoted by irrigation-return flows and by its slow dynamic compared to that of karstic systems. Pyrene concentration was also higher in some springs from karstic aquifers. Hence, calculated risk quotients were in general higher in groundwater, meaning that the threat to surface aquatic systems can grow as aquifers increase their influence on the water courses as the dry season progresses. The relationship between δ13CDIC and most organic contaminants (especially pyrene) reveal the role of the soil as storage media.

Electrodeposited copper enhanced removal of 2,4-dichlorophenol in batch and flow reaction in Cu@CC-PS-MFC system

Combination of microbial fuel cell (MFC) and advanced oxidation process (AOP) is promising for pollutant removal. In this paper, Cu0-loaded carbon cloth cathode by electrodeposition (Cu@CC-PS-MFC) was applied to enhance 2,4-dichlorophenol (2,4-DCP) degradation based on persulfate (PS) activation in microbial fuel cell. Cu0 exhibited a typical structure of face-centered cubic metal polyhedron on carbon cloth. The removal of 2,4-DCP by Cu@CC-PS-MFC (75.6%) was enhanced by more than 50% compared to CC-PS-MFC (49.2%) after 1 h of reaction. 30 mg/L 2,4-DCP in Cu@CC-PS-MFC was completely removed and achieved a high mineralization (80.6%) after 9 h of reaction under optimized condition with low dissolved copper ion concentration (0.615 mg/L). Meanwhile, more than 90% removal of 2,4-DCP was stably achieved with flow operation condition (hydraulic residence time of 7.2 h). The change of copper valent state Cu0/Cu2O/CuO was the main mechanism of PS activation with main reactive species of O•H and O21. The bioanode of MFC enhanced the in-situ regeneration of ≡Cu+ and ≡Cu0 on the catalyst surface by transporting electrons, which was believed to contribute to good catalyst lifetime and excellent 2,4-DCP removal. Electrodeposited copper contributes to the enhanced degradation of 2,4-DCP with energy recovery at the same time which can further broaden the application MFC.