Toxicity of Wastewater with Elevated Bromide and Iodide after Chlorination, Chloramination, or Ozonation Disinfection

The ideal model for determination the formation potential of priority DBPs during chlorination of free amino acids

Amino acids (AAs) account for about 15-35% of dissolved organic nitrogen (DON), and are known as the important precursors of nitrogenous disinfection by-products (N-DBPs). Determining the formation potential (FP) of AAs to DBPs is used to reveal the key precursors of DBPs for further control, while the ideal method for N-DBPs FP of AAs during chlorination is not revealed. In this study, the ideal FP test models for five classes of priority DBPs during chlorination of four representative AAs (accounted for about 35% of total AAs) were analyzed. For haloaldehydes (HALs), haloketones (HKs), haloacetonitriles (HANs), haloacetamides (HAMs), and halonitromethanes (HNMs), their FPs during chlorination of four AAs were 0.1-13.0, 0.01-1.1, 0.1-104, not detectable (nd)-173, and nd-0.4 μg/mg, respectively. The FPs of priority DBPs had significant deviations between different FP test models and different tested AAs. For HALs, the model, whose chlorine dosage was determined by 15 × molar concentration of AAs [Cl (mM) = 15 × M](named: model II), was the ideal model. For HKs, model II was also the ideal FP test model for AAs with ≤3 carbons, while for AAs with 4 carbons, the model, whose chlorine dosage was determined by keeping the residual chlorine at 1 ± 0.2 mg/L after 24 h of reaction (named: model 4), was the ideal model. For HANs and HNMs, model 4 was the ideal FP test model for most of the studied AAs. The performance of HAMs during chlorination of amino acids was totally different from other P-DBPs, and model 3 was recommended to be the ideal model, in which chlorine dosage was determined by 3 × mass concentration of AAs [Cl (mg/L) = X × DOC]. This study is a reference that helps researchers select an ideal model for N-DBPs FP study of AAs.

Machine learning framework for predicting cytotoxicity and identifying toxicity drivers of disinfection byproducts

Drinking water disinfection can result in the formation disinfection byproducts (DBPs, > 700 have been identified to date), many of them are reportedly cytotoxic, genotoxic, or developmentally toxic. Analyzing the toxicity levels of these contaminants experimentally is challenging, however, a predictive model could rapidly and effectively assess their toxicity. In this study, machine learning models were developed to predict DBP cytotoxicity based on their chemical information and exposure experiments. The Random Forest model achieved the best performance (coefficient of determination of 0.62 and root mean square error of 0.63) among all the algorithms screened. Also, the results of a probabilistic model demonstrated reliable model predictions. According to the model interpretation, halogen atoms are the most prominent features for DBP cytotoxicity compared to other chemical substructures. The presence of iodine and bromine is associated with increased cytotoxicity levels, while the presence of chlorine is linked to a reduction in cytotoxicity levels. Other factors including chemical substructures (CC, N, CN, and 6-member ring), cell line, and exposure duration can significantly affect the cytotoxicity of DBPs. The similarity calculation indicated that the model has a large applicability domain and can provide reliable predictions for DBPs with unknown cytotoxicity. Finally, this study showed the effectiveness of data augmentation in the scenario of data scarcity.

Screening Disinfection Byproducts in Arid-Coastal Wastewater: A Workflow Using GC×GC-TOFMS, Passive Sampling, and NMF Deconvolution Algorithm

Disinfection during tertiary municipal wastewater treatment is a necessary step to control the spread of pathogens; unfortunately, it also gives rise to numerous disinfection byproducts (DBPs), only a few of which are regulated because of the analytical challenges associated with the vast number of potential DBPs. This study utilized polydimethylsiloxane (PDMS) passive samplers, comprehensive two-dimensional gas chromatography (GC×GC) coupled with time-of-flight mass spectrometry (TOFMS), and non-negative matrix factorization (NMF) spectral deconvolution for suspect screening of DBPs in treated wastewater. PDMS samplers were deployed upstream and downstream of the chlorination unit in a municipal wastewater treatment plant located in Abu Dhabi, and their extracts were analyzed using GC×GC-TOFMS. A workflow incorporating a multi-tiered, eight-filter screening process was developed, which successfully enabled the reliable isolation of 22 candidate DBPs from thousands of peaks. The NMF spectral deconvolution improved the match factor score of unknown mass spectra to the reference mass spectra available in the NIST library by 17% and facilitated the identification of seven additional DBPs. The close match of the first-dimension retention index data and the GC×GC elution patterns of DBPs, both predicted using the Abraham solvation model, with their respective experimental counterparts-with the measured data available in the NIST WebBook and the GC×GC elution patterns being those observed for the candidate peaks-significantly enhanced the accuracy of peak assignment. Isotopic pattern analysis revealed a close correspondence for 11 DBPs with clearly visible isotopologues in reference spectra, thereby further strengthening the confidence in the peak assignment of these DBPs. Brominated analogues were prevalent among the detected DBPs, possibly due to seawater intrusion. The fate, behavior, persistence, and toxicity of tentatively identified DBPs were assessed using EPI Suite™ and the CompTox Chemicals Dashboard. This revealed their significant toxicity to aquatic organisms, including developmental, mutagenic, and endocrine-disrupting effects in certain DBPs. Some DBPs also showed activity in various CompTox bioassays, implicating them in adverse molecular pathways. Additionally, 11 DBPs demonstrated high environmental persistence and resistance to biodegradation. This combined approach offers a powerful tool for future research and environmental monitoring, enabling accurate identification and assessment of DBPs and their potential risks.

Ferrate(VI) assists in reducing cytotoxicity and genotoxicity to mammalian cells and organic bromine formation in ozonated wastewater

Ozonation of wastewater containing bromide (Br-) forms highly toxic organic bromine. The effectiveness of ozonation in mitigating wastewater toxicity is minimal. Simultaneous application of ozone (O3) (5 mg/L) and ferrate(VI) (Fe(VI)) (10 mg-Fe/L) reduced cytotoxicity and genotoxicity towards mammalian cells by 39.8% and 71.1% (pH 7.0), respectively, when the wastewater has low levels of Br-. This enhanced reduction in toxicity can be attributed to increased production of reactive iron species Fe(IV)/Fe(V) and reactive oxygen species (•OH) that possess higher oxidizing ability. When wastewater contains 2 mg/L Br-, ozonation increased cytotoxicity and genotoxicity by 168%-180% and 150%-155%, respectively, primarily due to the formation of organic bromine. However, O3/Fe(VI) significantly (p < 0.05) suppressed both total organic bromine (TOBr), BrO3-, as well as their associated toxicity. Electron donating capacity (EDC) measurement and precursor inference using Orbitrap ultra-high resolution mass spectrometry found that Fe(IV)/Fe(V) and •OH enhanced EDC removal from precursors present in wastewater, inhibiting electrophilic substitution and electrophilic addition reactions that lead to organic bromine formation. Additionally, HOBr quenched by self-decomposition-produced H2O2 from Fe(VI) also inhibits TOBr formation along with its associated toxicity. The adsorption of Fe(III) flocs resulting from Fe(VI) decomposition contributes only minimally to reducing toxicity. Compared to ozonation alone, integration of Fe(VI) with O3 offers improved safety for treating wastewater with varying concentrations of Br-.

Enhanced electrooxidation/electrocoagulation-ultrafiltration membrane process with S2O42- for saline algae-containing surface water treatment: Purification and membrane performance

The surface water in coastal areas involving algae, is often affected by saline and emerging contaminants caused by saltwater intrusion, and expanding aquaculture industry. Therefore, it is necessary to conduct studies to address the issues that affect ecological safety and health of aquatic environments. This study presents the development of an enhanced electrooxidation/electrocoagulation-ultrafiltration (EO/EC-UF) membrane process using S2O42- (DTN@EO/EC-UF) for the treatment of saline water containing algae. Our results have shown that significant removal of NH3-N (95.1 %), UV254 (89.4 %) and algae (75.7 %) was achieved with the addition of S2O42- (DTN). Additionally, an optimal DTN dosage of 40 mg/L was used in the DTN@EO/EC process to enhance water purification, utilizing reactive species such as SO4·- and ·OH. After coupling with the ultrafiltration (UF) process, optimal operating conditions (DTN: 40 mg/L, current density: 4.65 mA/cm2, electrolysis: 60 s) were applied to treat the saline algae-containing surface water. The generated free chlorine, including NHCl2, accounted for approximately 22 % (0.14 mg/L). In addition, DTN significantly improved the ceramic membrane's permeability and anti-fouling characteristics, with a maximum increasing specific flux from 0.76 to 0.93, mainly attributing to the reduced the irreversible fouling resistance. Furthermore, we discovered that common membrane cleaning using acid or base enhanced the DTN@EO/EC-UF process. In conclusion, this study established an innovative DTN@EO/EC-UF process with excellent performance in terms of water purification and membrane self-cleaning. The results provided a promising alternative for treating saline algae-containing surface water.

Simultaneous modulation of CHO cell cytotoxicity, turbidity, and DOC by coagulation with or without pre-oxidation in water from the Pearl River Delta region, China

Coagulation with or without pre-oxidation are important drinking water treatment processes. However, the efficacy of these processes in mitigating water toxicity remains unknown. To further improve drinking water safety, we employed water from the Pearl River Delta region of southern China to investigate a treatment approach consisting of coagulation with or without pre-oxidation to simultaneously modulate health-relevant cytotoxicity to CHO cells, on top of the conventional foci of turbidity and dissolved organic carbon (DOC) during water treatment. Three coagulants (two aluminum-based and one iron-based salts) and three pre-oxidants (ozone, permanganate, and peroxymonosulfate) were studied. For coagulation without pre-oxidation, intermediate coagulant doses and pH reached optimum cytotoxicity to CHO cells, turbidity, and DOC control simultaneously. Introducing oxidants reduced cytotoxicity to CHO cells significantly, enhanced by increasing oxidant concentrations and pre-oxidation duration. The cytotoxicity to CHO cells mitigation capabilities of three pre-oxidants were: ozone > peroxymonosulfate > potassium permanganate. Modulation of water cytotoxicity to CHO cells was mostly attributable to controlling DOC (specifically humic-acid like substances, tyrosine, tryptophan). However, the addition of pre-oxidants led to significant shifts in water cytotoxicity to CHO cells forcing drivers, rendering humic-acid like substances the sole decisive cytotoxicity-inducing fluorophores. For the first time, 'sweet spots' were identified to simultaneously monitor cytotoxicity to CHO cells alongside turbidity and DOC. These methods better modulate water cytotoxicity to CHO cells without sacrificing conventional water treatment goals while shedding light onto the mechanisms behind.

Leaching of organic matter and iodine, formation of iodinated disinfection by-products and toxic risk from Laminaria japonica during simulated household cooking

Iodinated disinfection by-products (I-DBPs) exhibited potential health risk owing to the high toxicity. Our recent study demonstrated that I-DBPs from Laminaria japonica (Haidai), the commonly edible seaweed, upon simulated household cooking condition were several hundred times more than the concentration of drinking water. Here, the characterization of Haidai and its leachate tandem with the formation, identification and toxicity of I-DBPs from the cooking of Haidai were systemically investigated. The dominant organic matter in Haidai leachate were polysaccharides, while the highest iodine specie was iodide (∼90% of total iodine). Several unknown I-DBPs generated from the cooking of Haidai were tentatively proposed, of which 3,5-diiodo-4-hydroxybenzaldehyde was dominant specie. Following a simulated household cooking with real chloraminated tap water, the presence of Haidai sharply increased aggregate iodinated trihalomethanes, iodinated haloacetic acids, and total organic iodine concentrations to 97.4 ± 7.6 μg/L,16.4 ± 2.1 μg/L, and 0.53 ± 0.06 mg/L, respectively. Moreover, the acute toxicity of Haidai soup to Vibrio qinghaiensis sp.-Q67 was around 7.3 times higher than that of tap water in terms of EC50. These results demonstrated that the yield of I-DBPs from the cooking of Haidai and other seaweed should be carefully considered.

Bacterial inactivation processes in water disinfection - mechanistic aspects of primary and secondary oxidants - A critical review

Water disinfection during drinking water production is one of the most important processes to ensure safe drinking water, which is gaining even more importance due to the increasing impact of climate change. With specific reaction partners, chemical oxidants can form secondary oxidants, which can cause additional damage to bacteria. Cases in point are chlorine dioxide which forms free available chlorine (e.g., in the reaction with phenol) and ozone which can form hydroxyl radicals (e.g., during the reaction with natural organic matter). The present work reviews the complex interplay of all these reactive species which can occur in disinfection processes and their potential to affect disinfection processes. A quantitative overview of their disinfection strength based on inactivation kinetics and typical exposures is provided. By unifying the current data for different oxidants it was observable that cultivated wild strains (e.g., from wastewater treatment plants) are in general more resistant towards chemical oxidants compared to lab-cultivated strains from the same bacterium. Furthermore, it could be shown that for selective strains chlorine dioxide is the strongest disinfectant (highest maximum inactivation), however as a broadband disinfectant ozone showed the highest strength (highest average inactivation). Details in inactivation mechanisms regarding possible target structures and reaction mechanisms are provided. Thereby the formation of secondary oxidants and their role in inactivation of pathogens is decently discussed. Eventually, possible defense responses of bacteria and additional effects which can occur in vivo are discussed.

Chlorination (but Not UV Disinfection) Generates Cell Debris that Increases Extracellular Antibiotic Resistance Gene Transfer via Proximal Adsorption to Recipients and Upregulated Transformation Genes

To advance the understanding of antibiotic resistance propagation from wastewater treatment plants, it is important to elucidate how different effluent disinfection processes affect the dissemination of predominantly extracellular antibiotic resistance genes (eARGs). Here, we show that, by facilitating proximal adsorption to recipient cells, bacterial debris generated by chlorination (but not by UV irradiation) increases the natural transformation frequency of their adsorbed eARG by 2.9 to 7.2-fold relative to free eARGs. This is because chlorination increases the bacterial surface roughness by 1.1 to 6.7-fold and the affinity toward eARGs by 1.6 to 5.8-fold, and 98% of the total eARGs released after chlorination were adsorbed to cell debris. In contrast, UV irradiation released predominantly free eARGs with 18% to 56% lower transformation frequency. The collision theory indicates that the ARG donor-recipient collision frequency increased by 35.1-fold for eARGs adsorbed onto chlorination-generated bacterial debris, and the xDLVO model infers a 29% lower donor-recipient contact energy barrier for these ARGs. Exposure to chlorination-generated bacterial debris also upregulated genes associated with natural transformation in Vibrio vulnificus (e.g., tfoX encoding the major activator of natural transformation) by 2.6 to 5.2-fold, likely due to the generation of chlorinated molecules (5.1-fold higher Cl content after chlorination) and persistent reactive species (e.g., carbon-centered radicals) on bacterial debris. Increased proximal eARG adsorption to bacterial debris was also observed in the secondary effluent after chlorination; this decreased eARG decay by 64% and increased the relative abundance of ARGs by 7.2-fold. Overall, this study highlights that different disinfection approaches can result in different physical states of eARGs that affect their resulting dissemination potential via transformation.

Insights into the formation and mitigation of iodinated disinfection by-products during household cooking with Laminaria japonica (Haidai)

Iodinated disinfection by-products (I-DBPs) have attracted extensive interests because of their higher cytotoxicity and genotoxicity than their chlorinated and brominated analogues. Our recent studies have firstly demonstrated that cooking with seaweed salt could enhance the formation of I-DBPs with several tens of μg/L level. Here, I-DBP formation and mitigation from the reaction of disinfectant with Laminaria japonica (Haidai), an edible seaweed with highest iodine content, upon simulated household cooking process was systematically investigated. The total iodine content in Haidai ranged from 4.6 mg-I/g-Haidai to 10.0 mg-I/g-Haidai, and more than 90% of iodine is soluble iodide. During simulated cooking, the presence of disinfectant simultaneously decreased iodide by 15.0-32.8% to 2.7-5.8 mg/L and increased total organic iodine by 1.3-10.9 times to 0.5-1.8 mg/L in Haidai soup, proving I-DBP formation. The concentrations of iodinated trihalomethanes and haloacetic acids were at the levels of several hundreds of μg/L and several μg/L, respectively, which are 2-3 orders and 1-2 orders of magnitude more than those in drinking water. Effects of key factors including disinfectant specie, disinfectant dose, temperature and time on I-DBP formation were also ascertained, and temperature and disinfectant specie played a decisive role in the formation and speciation of I-DBPs. In order to avoid the potential health risk from the exposure of I-DBPs in Haidai soup, it is prerequisite to soak and wash dry Haidai sample over 30.0 min before cooking, which could effectively remove major soluble iodide. In general, this study provided the new insight into I-DBP formation from daily household cooking with Haidai and the corresponding enlightenment for inhabitants to eat Haidai in daily life.

NRF2-ARE signaling is responsive to haloacetonitrile-induced oxidative stress in human keratinocytes

Humans are exposed to disinfection by-products through oral, inhalation, and dermal routes, during bathing and swimming, potentially causing skin lesions, asthma, and bladder cancer. Nuclear factor E2-related factor 2 (NRF2) is a master regulator of the adaptive antioxidant response via the antioxidant reaction elements (ARE) orchestrating the transcription of a large group of antioxidant and detoxification genes. Here we used an immortalized human keratinocyte model HaCaT cells to investigate NRF2-ARE as a responder and protector in the acute cytotoxicity of seven haloacetonitriles (HANs), including chloroacetonitrile (CAN), bromoacetonitrile (BAN), iodoacetonitrile (IAN), bromochloroacetonitrile (BCAN), dichloroacetonitrile (DCAN), dibromoacetonitrile (DBAN), and trichloroacetonitrile (TCAN) found in drinking water and swimming pools. The rank order of cytotoxicity among the HANs tested was IAN ≈ BAN ˃ DBAN ˃ BCAN ˃ CAN ˃ TCAN ˃ DCAN based on their LC₅₀. The HANs induced intracellular reactive oxygen species accumulation and activated cellular antioxidant responses in concentration- and time-dependent fashions, showing elevated NRF2 protein levels and ARE activity, induction of antioxidant genes, and increased glutathione levels. Additionally, knockdown of NRF2 by lentiviral shRNAs sensitized the HaCaT cells to HANs-induced cytotoxicity, emphasizing a protective role of NRF2 against the cytotoxicity of HANs. These results indicate that HANs cause oxidative stress and activate NRF2-ARE-mediated antioxidant response, which in turn protects the cells from HANs-induced cytotoxicity, highlighting that NRF2-ARE activity could be a sensitive indicator to identify and characterize the oxidative stress induced by HANs and other environmental pollutants.

Molecular transformation of algal organic matter during sequential ozonation-chlorination: Role of pre-ozonation and properties of chlorinated disinfection byproducts

Formation of unknown chlorinated disinfection byproducts (Cl-DBPs) during chlorination gradually raised great concern, and pre-oxidation was considered as an efficient method to minimize Cl-DBP formation. In this study, pre-ozonation of algal organic matter was investigated, to explore its impacts on Cl-DBP formation and acute toxicity during subsequent chlorination. With fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) analysis, the conversion of algal organic matter in chlorination with/without pre-ozonation was tracked. The results show that pre-ozonation reduced the formation of trichloromethane (TCM), yet the species and intensity of unknown Cl-DBPs were significantly increased in subsequent chlorination. Meanwhile, the solution acute toxicity was higher in chlorination with pre-ozonation than in chlorination only. Besides, molecular properties of these unknown Cl-DBPs were further explored and featured. One-chlorine-containing DBPs were unsaturated high molecular-weight compounds with more CH₂ structures, while two or three-chlorine-containing DBPs were mainly oxidized or saturated compounds. Of note, large amounts of one-chlorine-containing DBPs related to polycyclic aromatics and polyphenols compositions were generated, which may contribute to the high potential toxicity. Overall, the findings of this study could provide new insights into the impacts of pre-ozonation on the formation of unknown Cl-DBPs and potential toxicity during chlorination for actual application.

Multiple Roles of Dissolved Organic Matter in Advanced Oxidation Processes

Advanced oxidation processes (AOPs) can degrade a wide range of trace organic contaminants (TrOCs) to improve the quality of potable water or discharged wastewater effluents. Their effectiveness is impacted, however, by the dissolved organic matter (DOM) that is ubiquitous in all water sources. During the application of an AOP, DOM can scavenge radicals and/or block light penetration, therefore impacting their effectiveness toward contaminant transformation. The multiple ways in which different types or sources of DOM can impact oxidative water purification processes are critically reviewed. DOM can inhibit the degradation of TrOCs, but it can also enhance the formation and reactivity of useful radicals for contaminants elimination and alter the transformation pathways of contaminants. An in-depth analysis highlights the inhibitory effect of DOM on the degradation efficiency of TrOCs based on DOM's structure and optical properties and its reactivity toward oxidants as well as the synergistic contribution of DOM to the transformation of TrOCs from the analysis of DOM's redox properties and DOM's transient intermediates. AOPs can alter DOM structure properties as well as and influence types, mechanisms, and extent of oxidation byproducts formation. Research needs are proposed to advance practical understanding of how DOM can be exploited to improve oxidative water purification.

Relationships between regulated DBPs and emerging DBPs of health concern in U.S. drinking water

A survey was conducted at eight U.S. drinking water plants, that spanned a wide range of water qualities and treatment/disinfection practices. Plants that treated heavily-wastewater-impacted source waters had lower trihalomethane to dihaloacetonitrile ratios due to the presence of more organic nitrogen and HAN precursors. As the bromide to total organic carbon ratio increased, there was more bromine incorporation into DBPs. This has been shown in other studies for THMs and selected emerging DBPs (HANs), whereas this study examined bromine incorporation for a wider group of emerging DBPs (haloacetaldehydes, halonitromethanes). Moreover, bromine incorporation into the emerging DBPs was, in general, similar to that of the THMs. Epidemiology studies that show an association between adverse health effects and brominated THMs may be due to the formation of brominated emerging DBPs of heath concern. Plants with higher free chlorine contact times before ammonia addition to form chloramines had less iodinated DBP formation in chloraminated distribution systems, where there was more oxidation of the iodide to iodate (a sink for the iodide) by the chlorine. This has been shown in many bench-scale studies (primarily for iodinated THMs), but seldom in full-scale studies (where this study also showed the impact on total organic iodine. Collectively, the THMs, haloacetic acids, and emerging DBPs accounted for a significant portion of the TOCl, TOBr, and TOI; however, ∼50% of the TOCl and TOBr is still unknown. The correlation of the sum of detected DBPs with the TOCl and TOBr suggests that they can be used as reliable surrogates.

Effects of ultrasonication on the DBP formation and toxicity during chlorination of saline wastewater effluents

Chlorine disinfection of saline wastewater effluents rich in bromide and iodide forms relatively toxic brominated and iodinated disinfection byproducts (DBPs). Ultrasonication is a relatively new water treatment technology, and it is less sensitive to suspended solids in wastewaters. In this study, we examined the effects of ultrasonication (in terms of reactor type and combination mode with chlorination) on the DBP formation and toxicity in chlorinated primary and secondary saline wastewater effluents. Compared with the chlorinated wastewater effluent samples without ultrasonication, ultrasonic horn pretreatment of the wastewater effluent samples reduced the total organic halogen (TOX) levels in chlorination by ∼30%, but ultrasonic bath pretreatment of the wastewater samples did not significantly change the TOX levels in chlorination, which might be attributed to the higher energy utilization and decomposition extent of organic DBP precursors in the ultrasonic horn reactor. Moreover, the TOX levels in the chlorinated samples with ultrasonic horn pretreatment (USH-chlorination), simultaneous treatment (chlorination+USH) and subsequent treatment (chlorination-USH) were also significantly reduced, with the maximum TOX reductions occurring in the samples with ultrasonic horn pretreatment. A toxicity index was calculated by weighting and summing the levels of total organic chlorine, total organic bromine and total organic iodine in each treated sample. The calculated toxicity index values of the chlorinated wastewater effluent samples followed a descending rank order of "chlorination" > "chlorination+USH" > "chlorination-USH" > "USH-chlorination", with the lowest toxicity occurring in the samples with ultrasonic horn pretreatment. Then, a developmental toxicity bioassay was conducted for each treated sample. The measured toxicity index values of the chlorinated wastewater samples followed the same descending rank order.

Effect of ammonia on acute toxicity and disinfection byproducts formation during chlorination of secondary wastewater effluents

Ammonia nitrogen (NH₃-N) significantly affects the occurrence of disinfection byproducts (DBPs) and residual chlorine in chlorinated wastewater, thereby affecting the acute toxicity to aquatic organisms. In this paper, the formation of thirty-five halogenated DBPs and the changes in acute toxicity of luminescent bacteria and zebrafish embryos were evaluated after chlorination of seven secondary wastewater effluents with different NH₃-N concentrations. Results showed that NH₃-N significantly reduced the formation of most DBPs by 82-100%. The acute toxicity was enhanced after chlorination and increased linearly with increasing NH₃-N concentration for luminescent bacteria (r = 0.986, p < 0.05) and zebrafish embryos (r = 0.972, p < 0.05) due to the coexistence of DBPs and monochloramine. According to the toxicity classification system of wastewater, the fitting results indicated that the toxicity level was acceptable for chlorinated wastewater with NH₃-N concentration below 1.00 mg-N/L. DBPs might be the main toxicant to luminescent bacteria in the wastewater with low NH₃-N concentrations (0.06-0.31 mg-N/L), which accounted for 68-97% of the toxicity contribution. By contrast, monochloramine contributed over 80% to the toxicity of luminescent bacteria and zebrafish embryos in the wastewater with high NH₃-N concentrations (2.66-7.17 mg-N/L). Compared to chlorination, chlorine dioxide and ultraviolet disinfection unaffected by NH₃-N could reduce acute toxicity by nearly 100%, primarily due to the lack of residual disinfectant. In view of the high toxicity caused by chlorination, chlorination-dechlorination or chlorine dioxide and UV disinfection are highly recommended for the treatment of wastewater with high NH₃-N concentration.

Potassium ferrate combined with ultrafiltration for treating secondary effluent: Efficient removal of antibiotic resistance genes and membrane fouling alleviation

Antibiotic resistance genes (ARGs) are considered as emerging environmental contaminants, which should be controlled by wastewater treatment plants to prevent their discharge into the environment. However, conventional treatment techniques generally fail to successfully reduce ARGs, and the release of cell-free ARGs was underestimated. In this study, potassium ferrate (Fe(VI)) pretreatment combined with ultrafiltration (UF) process was developed to remove both cell-associated and cell-free ARGs in real secondary effluent, compared to ferric chloride (Fe(III)) and poly-aluminum chloride (PACl) pretreatment processes. It was found that total ARGs especially cell-free ARGs were effectively removed by Fe(VI) oxidation. However, due to the poor settleability of the negatively charged particles formed by Fe(VI) in the secondary effluent, the removal of cell-associated ARGs was less compared to Fe(III) and PACl pretreatments. The combination of Fe(VI) and UF removed the most ARGs (3.26 - 5.01 logs) due to the efficient removal of cell-free ARGs by Fe(VI) (> 2.15 logs) and co-interception of both cell-associated ARGs and Fe(VI) formed particles of the UF. High-throughput sequencing revealed that Fe(VI) decreased the viability and relative abundances of the potential ARGs hosts. Fe(VI)-UF exhibited the best performance on humic-like fluorescent organic matters removal, as well as the least phytotoxicity in the effluent. Moreover, membrane fouling was remarkably alleviated by Fe(VI) pretreatment because (1) Fe(VI) removed macromolecules such as protein-like and polysaccharide-like substances which would block the membrane pores, (2) Fe(VI) improved the hydrophilicity of foulants and reduced the hydrophobic adsorption between foulants and membrane. In short, Fe(VI)-UF is a promising technology to efficiently remove ARGs (especially cell-free ARGs) and alleviate UF membrane fouling in wastewater reclamation.

Potential risks and approaches to reduce the toxicity of disinfection by-product - A review

Water contamination through anthropogenic and industrial activities has led to the emergence and necessity of disinfection methods. Chlorine and bromine gases, often used to disinfect water, resulted in the by-product formation by reacting with organic matter. The Disinfectant by-products (DBP) led to the formation of Trihaloaceticacid (TAA), Trihalomethane (THM), and other minor components. The release of chemicals has also led to the outbreak of diseases like infertility, asthma, stillbirth, and types of cancer. There are new approaches that are found to be useful to compensate for the generation of toxic by-products and involve membrane technologies, namely reverse osmosis, ultrafiltration, and nanofiltration. This review mainly focuses on the toxicology effects of DBPs and various approaches to mitigate the same. The health hazards caused by different DBPs and the various treatment techniques available for the removal are discussed. In addition, a critical comparison of the different removal techniques was discussed.

Ozonation of organic compounds in water and wastewater: A critical review

Ozonation has been applied in water treatment for more than a century, first for disinfection, later for oxidation of inorganic and organic pollutants. In recent years, ozone has been increasingly applied for enhanced municipal wastewater treatment for ecosystem protection and for potable water reuse. These applications triggered significant research efforts on the abatement efficiency of organic contaminants and the ensuing formation of transformation products. This endeavor was accompanied by developments in analytical and computational chemistry, which allowed to improve the mechanistic understanding of ozone reactions. This critical review assesses the challenges of ozonation of impaired water qualities such as wastewaters and provides an up-to-date compilation of the recent kinetic and mechanistic findings of ozone reactions with dissolved organic matter, various functional groups (olefins, aromatic compounds, heterocyclic compounds, aliphatic nitrogen-containing compounds, sulfur-containing compounds, hydrocarbons, carbanions, β-diketones) and antibiotic resistance genes.

Effect of bromide on molecular transformation of dissolved effluent organic matter during ozonation, UV/H2O2, UV/persulfate, and UV/chlorine treatments

Ozonation and ultraviolet-based advanced oxidation processes (UV-AOPs) play important roles in advanced treatment of municipal wastewater for water reuse. Bromide is widely present in wastewater at different concentration levels (ranging from μg/L to mg/L). However, the effect of bromide on molecular transformation of dissolved effluent organic matter (dEfOM) in real wastewater during ozonation and UV-AOPs treatments still remains unclear. Herein, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) was utilized to characterize the overall molecular transformation of dEfOM and the formation of unknown halogenated byproducts (X-BPs) in ozonation, UV/H₂O₂, UV/persulfate (UV/PS), and UV/chlorine (UV/Cl) processes in the presence of additional bromide. Compared with the same oxidation processes without additional bromide, the degree of dEfOM oxygenation had some extent decrement with the effect of bromide. A slightly increment of the number of unknown brominated byproducts (Br-BPs) was observed during ozonation, UV/H₂O₂, and UV/PS treatments in the presence of additional bromide, and the largest increment of these compounds was found in UV/Cl process. A total of 82 chlorinated byproducts (Cl-BPs) and 183 Br-BPs were detected in all oxidation processes with the effect of bromide, and the number of Br-BPs was significantly higher than that of Cl-BPs. Based on mass difference analysis, 69 pairs of possible precursors/Br-BPs were identified. In addition, the additional bromide did not remarkably increase the concentrations of trihalomethanes (THMs) and haloacetic acids (HAAs) in ozonation, UV/H₂O₂, and UV/PS treatments, while the production of THMs and HAAs significantly decreased by 68.06% and 54.55%, respectively, during UV/Cl treatment. The calculated cytotoxicity increased to some extent for each treatment, especially for UV/Cl treatment, and the compound with largest contribution to cytotoxicity was monobromoacetic acid. This study provides new insights into the formation and transformation of X-BPs during advanced treatment of real wastewater with the effect of bromide.

Aquatic toxicity and aquatic ecological risk assessment of wastewater-derived halogenated phenolic disinfection byproducts

Increasing number of wastewater-derived aliphatic and phenolic disinfection byproducts (DBPs) were discharged into aquatic environment with the discharge of disinfected wastewater. However, the currently available aquatic toxicity data and the aquatic ecological risk information of them are limited, especially for wastewater-derived phenolic DBPs. In this study, we investigated the acute toxicity of 7 phenolic DBPs that selected from the typical five groups of phenolic DBPs (2,4,6-trihalo-phenols, 2,6-dihalo-4-nitrophenols, 3,5-dihalo-4-hydroxybenzaldehydes, 3,5-dihalo-4-hydroxybenzoic acids and halo-salicylic acids) and 4 aliphatic DBPs to Gobiocypris rarus and also assessed their potential aquatic ecological risk. Experimental results indicated that the half lethal concentration (LC₅₀) values of 2,4,6-trihalo-phenols and 2,6-dihalo-4-nitrophenols ranged from 1 to 10 mg/L; While that of 3,5-dihalo-4-hydroxybenzaldehydes was between 10 and 100 mg/L, and 3,5-dihalo-4-hydroxybenzoic acids and halo-salicylic acids was >100 mg/L. The toxicity mode of action (MOA) identification results from three methods suggested that no clear and consistent MOA were obtained for those 11 DBPs currently. The species-specific aquatic toxicity analysis results highlighted that no aquatic species would be considered as the most sensitive species for all 11 DBPs. However, crustacean and fish were more sensitive than that of algae for most of tested compounds. Lastly, the aquatic ecological risk assessment results of those 11 DBPs revealed that all 7 phenolic and 2 aliphatic DBPs (2-bromoacetamide and bromodichloromethane) had low aquatic ecological risk, while dichloroacetic acid and dibromoacetonitrile had high aquatic ecological risk. The low environmental concentration was the main reason why high toxic phenolic DBPs (2,4,6-trihalo-phenols and 2,6-dihalo-4-nitrophenols) exhibited low ecological risk. Their ecological risk may increase with the increases of corresponding environmental concentration. Thus, more efforts should be made to determine other potential harmful effects of those high toxic phenolic DBPs and to minimize their potential ecological risk by taking appropriate measures.

Preferential Halogenation of Algal Organic Matter by Iodine over Chlorine and Bromine: Formation of Disinfection Byproducts and Correlation with Toxicity of Disinfected Waters

The increasing occurrence of harmful algal blooms (HABs) in surface waters may increase the input of algal organic matter (AOM) in drinking water. The formation of halogenated disinfection byproducts (DBPs) during combined chlorination and chloramination of AOM and natural organic matter (NOM) in the presence of bromide and iodide and haloform formation during halogenation of model compounds were studied. Results indicated that haloform/halogen consumption ratios of halogens reacting with amino acids (representing proteins present in AOM) follow the order iodine > bromine > chlorine, with ratios for iodine generally 1-2 orders of magnitude greater than those for chlorine (0.19-2.83 vs 0.01-0.16%). This indicates that iodine is a better halogenating agent than chlorine and bromine. In contrast, chlorine or bromine shows higher ratios for phenols (representing the phenolic structure of humic substances present in NOM). Consistent with these observations, chloramination of AOM extracted from Microcystis aeruginosa in the presence of iodide produced 3 times greater iodinated trihalomethanes than those from Suwannee River NOM isolate. Cytotoxicity and genotoxicity of disinfected algal-impacted waters evaluated by Chinese hamster ovary cell bioassays both follow the order chloramination > prechlorination-chloramination > chlorination. This trend is in contrast to additive toxicity calculations based on the concentrations of measured DBPs since some toxic iodinated DBPs were not identified and quantified, suggesting the necessity of experimentally analyzing the toxicity of disinfected waters. During seasonal HAB events, disinfection practices warrant optimization for iodide-enriched waters to reduce the toxicity of finished waters.

Treatment-driven removal efficiency, product formation, and toxicity evolution of antineoplastic agents: Current status and implications for water safety assessment

Antineoplastic compounds, designed for chemotherapeutic anticancer therapy, have become emerging contaminants of global concern over the past decade due to their ubiquitous occurrence, environmental persistence, and multiple adverse effects on aquatic ecosystems. Increasing efforts have been devoted to developing efficient strategies for remediating water containing these micropollutants. In this study, the physicochemical properties, natural attenuation, and chemical reactivity with aqueous oxidizing species of five antineoplastic drugs with the highest environmental prevalence (i.e., tamoxifen, cyclophosphamide, ifosfamide, 5-fluorouracil, and methotrexate) were summarized. The removal performance, transformation products (TPs) of varying structures, overall reaction pathways, and toxicity evolution during different treatments were evaluated and discussed. Additionally, the biodegradability and multi-endpoint toxicity of each TP were predicted using in silico QSAR software. Depending on their distinct inherent structures, the reactivity of the antineoplastics with oxidizing species varied, with hydroxyl radicals exhibiting unparalleled merits in rapid oxidation. Complete elimination of these contaminants was observed during oxidative treatments, but with inadequate mineralization. Notably, the increase in toxicity within multiple processes was determined based on both experimental bioassays and theoretical predictions. This may be attributed to the adverse effects induced by the large number of identified and unknown TPs individually and in combination. Together with the environmental persistence and low biodegradability of most TPs, these results necessitate the application of efficient post-treatments in conjunction with a more thorough water safety evaluation (e.g., using high-throughput screening) of the mixtures of treated water and wastewater.

The fate and transformation of iodine species in UV irradiation and UV-based advanced oxidation processes

Iodinated disinfection byproducts (I-DBPs) formed in water treatment are of emerging concern due to their high toxicity and the tase-and-odor problems associated with iodinated trihalomethanes (I-THMs). Iodoacetic acid and dichloroiodomethane are currently regulated in Shenzhen, China and the Ministry of Health of the People's Republic of China has also been considering regulating I-DBPs. Iodide (I^-), organoiodine compounds (e.g., iodinated X-ray contrast media [ICM]), and iodate (IO₃^-) are the three common iodine sources in aquatic environment that lead to I-DBP formation. While UV irradiation effectively inactivate a wide range of microorganisms in water, it induces the transformation of these iodine sources, enabling the formation of I-DBPs. This review focuses on the fate and transformation of these iodine sources in UV-based water treatment (i.e., UV irradiation and UV-based advanced oxidation processes [UV-AOPs]) and the formation of I-DBPs in post-disinfection. I^- released in UV-based treatments of ICM and can be oxidized in subsequent disinfection to hypoiodous acid (HOI), which reacts with natural organic matter (NOM) to produce I-DBPs. Both UV and UV-AOPs are not able to fully mineralize ICM and completely oxidize the released I^- to (except UV/O₃). Results reveal that UV and UV-AOPs are adequate for I-DBP degradation but require high UV doses. While the ideal I-DBP mitigation strategy awaits to be developed, understanding their sources and formation pathways aids in informed selections of water treatment processes, empowers water suppliers to meet drinking water standards, and minimizes consumers' exposure to I-DBPs.

Disinfection Byproduct Recovery during Extraction and Concentration in Preparation for Chemical Analyses or Toxicity Assays

Over 700 disinfection byproducts (DBPs) have been identified, but they account for only ∼30% of total organic halogen (TOX). Extracting disinfected water is necessary to assess the overall toxicity of both known and unknown DBPs. Commonly used DBP extraction methods include liquid-liquid extraction (LLE) and solid-phase extraction (SPE), which may use either XAD resins or other polymeric sorbents. With few exceptions, DBP recoveries have not been quantified. We compared recoveries by LLE, XAD resins, and a mixture of Phenomenex Sepra SPE sorbents (hereafter SPE) for (semi-)volatile DBPs and nonvolatile model compounds at the 1-L scale. We scaled up the three methods to extract DBPs in 10 L of chlorinated creek waters. For (semi-)volatile DBPs, XAD resulted in lower recoveries than LLE and SPE at both 1- and 10-L scales. At the 10-L scale, recovery of certain trihalomethanes and trihalogenated haloacetic acids by XAD was negligible, while recovery of other (semi-)volatile DBPs extracted by XAD (<30%) was lower than by SPE or LLE (30-60%). TOX recovery at the 10-L scale was generally similar by the three extraction methods. The low TOX recovery (<30%) indicates that the toxicity assessed by bioassays predominantly reflects the contribution of the nonvolatile, hydrophobic fraction of DBPs.

Reduction of cytotoxicity and DNA double-strand break effects of wastewater by ferrate(VI): Roles of oxidation and coagulation

Ferrate(VI) (Fe(VI)) can oxidize individual pollutants, but the pollutant oxidation does not necessarily result in toxicity reduction. Besides, Fe(VI) resultant Fe(III) particles has previously been used to remove heavy metals, but its influence on organic matter and toxicity of wastewater is unknown. This study investigated influence of Fe(VI) on the cytotoxicity and DNA double-strand break (DSB) effects of secondary effluents from wastewater treatment plants to Chinese hamster ovary cells. Adding 5.0 mg/L Fe(VI) as Fe reduced the cytotoxicity and genotoxicity of secondary effluents by 44%-71% and 40%-59%, respectively. The toxicity reduction could be explained by the alleviation of oxidative stress in cells when they were exposed to the Fe(VI)-treated organic matter. Oxidation and coagulation accounted for 60 and 40% of the reductions in cytotoxicity and genotoxicity, demonstrating that both oxidation and coagulation processes can play important roles in reducing toxicity. Molecular weight (MW)-distribution analysis showed that the oxidation process was favored for removing ultraviolet absorbance and fluorescence intensity of organic matter, while the coagulation process removed more dissolved organic carbon (DOC), especially the DOC of fractions with MW < 500 Da. Compared with ferric chloride, the Fe(VI) resultant Fe(III) showed better coagulation performance on organic matter, cytotoxicity and genotoxicity removal, because of the different particle sizes and crystalline structures. This study highlights the benefit of using Fe(VI) in advanced treatment as Fe(VI) reduced the overall toxicity of secondary effluents.

Comparison of Estrogenic, Spectroscopic, and Toxicological Analyses of Pilot-Scale Water, Wastewaters, and Processed Wastewaters at Select Military Installations

Reuse of water requires the removal of contaminants to ensure human health. We report the relative estrogenic activity (REA) of reuse treatment design scenarios for water, wastewaters, and processed wastewaters before and after pilot-scale treatment systems tested at select military facilities. The comparative relationships between REA, several composite toxicological endpoints, and spectroscopic indicators were evaluated for different reuse treatment trains. Four treatment processes including conventional and advanced treatments reduced the estrogenicity by at least 33%. Biologically based methods reduced estrogenicity to below detection levels. Conventional treatment scenarios led to significantly less reduction of adverse biological endpoints compared to the advanced treatment scenarios. Incorporating the anaerobic membrane bioreactor reduced more endpoints with higher reduction percentages compared to the sequencing batch reactor design. Membrane technology and advanced oxidation generated reductions across all biological endpoints, from 65% (genotoxicity) to 100% (estrogenicity). The design scenarios featuring a low-cutoff mechanical screen filter, intermittent activated carbon biofilter, and membrane filtration achieved the highest percent reduction and produced water with the lowest negative biological endpoints. Spectroscopic indicators demonstrated case-specific relationships with estrogenicity and toxicity. Estrogenicity consistently correlated with cytotoxicity and thiol reactivity, indicating the potential for preliminary estrogenicity screening using thiol reactivity.

Investigation of bromide removal and bromate minimization of membrane capacitive deionization for drinking water treatment

The ubiquitous bromide (Br^-) poses a challenge to current drinking water treatment schemes due to the formation of brominated disinfection by-products, especially bromate (BrO₃^-). A cost-effective and energy-efficient technology to remove Br^- before disinfection is highly desired. In this work, the application of membrane capacitive deionization (MCDI) for the removal of Br^- and BrO₃^- minimization for drinking water treatment was systematically investigated. Results showed that the removal of Br^- by MCDI followed the pseudo-second-order kinetics, in which kinetics was faster at lower Br^- concentration. Additionally, Br^- displayed a preferential electrosorption over Cl^- in MCDI despite the relatively smaller amounts. Due to high removal performance of Br^-, 99.49% of BrO₃^- minimization can be achieved. Moreover, the presence of humic acid (HA) had a negative effect on the removal of Br^- and BrO₃^- minimization. However, Br^- could be more preferentially removed than Cl^- in the presence of HA due to the weak interaction with HA. Finally, by treating an actual surface water sample, it was found that the removal rate of Br^- was 91.80%, and 83.97% of BrO₃^- minimization can be achieved. BrO₃^- concentration of effluent meets the control standard. Overall, these results prove the feasibility of MCDI for practical drinking water treatment.

Toxicity of Ozonated Wastewater to HepG2 Cells: Taking Full Account of Nonvolatile, Volatile, and Inorganic Byproducts

Wastewater ozonation forms various toxic byproducts, such as aldehydes, bromate, and organic bromine. However, there is currently no clear understanding of the overall toxicity changes in ozonated wastewater because pretreatment with solid phase extraction cannot retain inorganic bromate and volatile aldehydes, yet contributions of known ozonation byproducts to toxicity are unknown. Moreover, compared with bromate, organic bromine did not receive widespread attention. This study evaluated the toxicity of ozonated wastewater by taking aldehydes, bromate, and organic bromine into consideration. In the absence of bromide, formaldehyde contributed 96-97% cytotoxicity and 92-95% genotoxicity to HepG2 cells among the detected known byproducts, while acetaldehyde, propionaldehyde, and glyoxal had little toxicity. Both formaldehyde and dibromoacetonitrile drove toxicity among the known byproducts when bromide was present. Toxicity assays in HepG2 cells showed that when secondary effluents contained no bromide, the cytotoxicity of the nonvolatile organic fraction (NVOF) was reduced by 56-70%, and genotoxicity was completely removed after ozonation. However, the formed aldehydes (volatile organic fraction, VOF) led to increased overall toxicity. In the presence of bromide, compared with the secondary effluent, ozonation increased the cytotoxicity of the NVOF_Br from 3.4-4.0 mg phenol/L to 10.3-13.9 mg phenol/L, possibly due to the formation of organic bromine. In addition, considering the toxicity of VOF_Br (VOF in the presence of bromide, including aldehydes, tribromomethane, etc.), the overall cytotoxicity and genotoxicity became much higher than those of the secondary effluent. Although bromate had a limited impact on cytotoxicity and genotoxicity, it caused an increase in oxidative stress in HepG2 cells. Therefore, when taking full account of nonvolatile, volatile, and inorganic fractions, ozonation generally increases the toxicity of wastewater.

Unravelling molecular transformation of dissolved effluent organic matter in UV/H2O2, UV/persulfate, and UV/chlorine processes based on FT-ICR-MS analysis

Ultraviolet-based advanced oxidation processes (UV-AOPs) are very promising in advanced treatment of municipal secondary effluents. However, the transformation of dissolved effluent organic matter (dEfOM) in advanced treatment of real wastewater, particularly at molecular level, remains unclear. In this study, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) coupled with multiple statistical analysis were performed to better understand the transformation of dEfOM in UV/H₂O₂, UV/persulfate (UV/PS), and UV/chlorine treatments. An obvious increase in oxygen content of dEfOM was observed after every UV-AOPs treatment, and the detailed oxygenation processes were further uncovered by mass difference analysis based on 24 types of typical reactions. Generally, UV/H₂O₂ process was subjected to the most oxygenation reactions with the typical tri-hydroxylation one (+3O), whereas di-hydroxylation reaction (+H₂O₂) was dominant in UV/PS and UV/chlorine processes. Additionally, the three UV-AOPs shared the majority of precursors, and more proportions of unique products were identified for each process. The precursors with lower H/C and higher aromaticity were readily degraded by UV/chlorine over UV/H₂O₂ and UV/PS, with the products featuring lower molecular weight. Moreover, dEfOM of high aromaticity tended to produce chlorinated byproducts through addition reactions in chlorination and UV/chlorine processes. Among these UV-AOPs, the highest reduction of both acute toxicity and specific UV absorbance at 254 nm (SUVA₂₅₄) was observed for UV/chlorine, implying the potential for UV/chlorine process in advanced treatment of wastewater. In addition, acute toxicity was highly correlated with SUVA₂₅₄ and CHOS compounds. This study is believed to help better understand the different fates of dEfOM in real wastewater during UV-AOPs treatment.

Removal of extracellular antibiotic resistance genes using magnetic biochar/quaternary phosphonium salt in aquatic environments: A mechanistic study

The proliferation and spread of antibiotic resistance genes (ARGs) is becoming a worldwide crisis. Extracellular DNA encoding ARGs (eARGs) in aquatic environment plays a critical role in the dispersion of antimicrobial resistance genes. Strategies to control the dissemination of eARGs are urgently required for ecological safety and human health. Towards this goal, magnetic biochar/quaternary phosphonium salt (MBQ), was used to investigate the efficiency and removal mechanism for eARGs. Magnetic biochar modified by quaternary phosphonium salt enhanced the adsorption capacity of extracellular DNA to approximately 9 folds, compared to that of the unmodified. DNA adsorption by MBQ was mainly dominated by chemisorption in heterogeneous systems and was promoted in acidic and low-salt environment. The generation of •OH and MBQ colloid jointly cleaved DNA into fragments, facilitating the adsorption of the phosphate backbone of DNA onto MBQ through electrostatic force as well as the conformational transition of DNA. Furthermore, quantification of extracellular DNA after MBQ was applied in water demonstrated that over 92.7% of resistance genes were removed, indicating a significantly reduced risk of propagation of antimicrobial resistance in aquatic environments. These findings have a practical significance in the application of MBQ in mitigating the spread of ARGs in aquatic environment.

In vitro effects-based method and water quality screening model for use in pre- and post-distribution treated waters

Recent urban public water supply contamination events emphasize the importance of screening treated drinking water quality after distribution. In vitro bioassays, when run concurrently with analytical chemistry methods, are effective tools to evaluating the efficacy of water treatment processes and water quality. We tested 49 water samples representing the Chicago Department of Water Management service areas for estrogen, (anti)androgen, glucocorticoid receptor-activating contaminants and cytotoxicity. We present a tiered screening approach suitable to samples with anticipated low-level activity and initially tested all extracts for statistically identifiable endocrine activity; performing a secondary dilution-response analysis to determine sample EC50 and biological equivalency values (BioEq). Estrogenic activity was detected in untreated Lake Michigan intake water samples using mammalian (5/49; median: 0.21 ng E2Eq/L) and yeast cell (5/49; 1.78 ng E2Eq/L) bioassays. A highly sensitive (anti)androgenic activity bioassay was applied for the first time to water quality screening and androgenic activity was detected in untreated intake and treated pre-distribution samples (4/49; 0.93 ng DHTEq/L). No activity was identified above method detection limits in the yeast androgenic, mammalian anti-androgenic, and both glucocorticoid bioassays. Known estrogen receptor agonists were detected using HPLC/MS-MS (estrone: 0.72-1.4 ng/L; 17α-estradiol: 1.3-1.5 ng/L; 17β-estradiol: 1.4 ng/L; equol: 8.8 ng/L), however occurrence did not correlate with estrogenic bioassay results. Many studies have applied bioassays to water quality monitoring using only relatively small samples sets often collected from surface and/or wastewater effluent. However, to realistically adapt these tools to treated water quality monitoring, water quality managers must have the capacity to screen potentially hundreds of samples in short timeframes. Therefore, we provided a tiered screening model that increased sample screening speed, without sacrificing statistical stringency, and detected estrogenic and androgenic activity only in pre-distribution Chicago area samples.

Toxicity of hydraulic fracturing wastewater from black shale natural-gas wells influenced by well maturity and chemical additives

Hydraulic fracturing of deep shale formations generates large volumes of wastewater that must be managed through treatment, reuse, or disposal. Produced wastewater liberates formation-derived radionuclides and contains previously uncharacterized organohalides thought to be generated within the shale well, both posing unknown toxicity to human and ecological health. Here, we assess the toxicity of 42 input media and produced fluid samples collected from four wells in the Utica formation and Marcellus Shale using two distinct endpoint screening assays. Broad spectrum acute toxicity was assessed using a bioluminescence inhibition assay employing the halotolerant bacterium Aliivibrio fischeri, while predictive mammalian cytotoxicity was evaluated using a N-acetylcysteine (NAC) thiol reactivity assay. The acute toxicity and thiol reactivity of early-stage flowback was higher than later produced fluids, with levels diminishing through time as the natural gas wells matured. Acute toxicity of early stage flowback and drilling muds were on par with the positive control, 3,5-dichlorophenol (6.8 mg L-1). Differences in both acute toxicity and thiol reactivity between paired natural gas well samples were associated with specific chemical additives. Samples from wells containing a larger diversity and concentration of organic additives resulted in higher acute toxicity, while samples from a well applying a higher composition of ammonium persulfate, a strong oxidizer, showed greater thiol reactivity, predictive of higher mammalian toxicity. Both acute toxicity and thiol reactivity are consistently detected in produced waters, in some cases present up to nine months after hydraulic fracturing. These results support that specific chemical additives, the reactions generated by the additives, or the constituents liberated from the formation by the additives contribute to the toxicity of hydraulic fracturing produced waters and reinforces the need for careful consideration of early produced fluid management.

Reactivity-directed analysis - a novel approach for the identification of toxic organic electrophiles in drinking water

Drinking water consumption results in exposure to complex mixtures of organic chemicals, including natural and anthropogenic chemicals and compounds formed during drinking water treatment such as disinfection by-products. The complexity of drinking water contaminant mixtures has hindered efforts to assess associated health impacts. Existing approaches focus primarily on individual chemicals and/or the evaluation of mixtures, without providing information about the chemicals causing the toxic effect. Thus, there is a need for the development of novel strategies to evaluate chemical mixtures and provide insights into the species responsible for the observed toxic effects. This critical review introduces the application of a novel approach called Reactivity-Directed Analysis (RDA) to assess and identify organic electrophiles, the largest group of known environmental toxicants. In contrast to existing in vivo and in vitro approaches, RDA utilizes in chemico methodologies that investigate the reaction of organic electrophiles with nucleophilic biomolecules, including proteins and DNA. This review summarizes the existing knowledge about the presence of electrophiles in drinking water, with a particular focus on their formation in oxidative treatment systems with ozone, advanced oxidation processes, and UV light, as well as disinfectants such as chlorine, chloramines and chlorine dioxide. This summary is followed by an overview of existing RDA approaches and their application for the assessment of aqueous environmental matrices, with an emphasis on drinking water. RDA can be applied beyond drinking water, however, to evaluate source waters and wastewater for human and environmental health risks. Finally, future research demands for the detection and identification of electrophiles in drinking water via RDA are outlined.

Occurrence and removal of organic pollutants by a combined analysis using GC-MS with spectral analysis and acute toxicity

The presence of xenobiotic compounds especially organic micro-pollutants in municipal wastewater treatment plant (MWWTP) is a major concern worldwide. The occurrence and removal of trace organic pollutants in a MWWTP by a combined analysis using GC-MS with spectral analysis and acute toxicity were studied in this work. Non-target screening and toxicity analysis of organic compounds were conducted to understand the types of toxic and refractory pollutants in municipal wastewater and evaluated the toxicity removal efficiency of MWWTP. The results showed that most of the effects were significantly reduced or completely eliminated during the wastewater treatment process, while some compounds, such as antioxidants, drugs, and organic plasticizers, had detection rates of up to 100% at each site, indicating that these harmful substances remained throughout wastewater treatment process. Based on Pearson correlation analysis, paired correlation analysis showed a positive correlation between UV₂₅₄, humification index, conventional parameters, and organic acute toxicity, while acute toxicity was negatively correlated with biological index and fluorescence index. The results indicated that the composition of MWWTP had a similar influence law in different locations, and the combination of spectral analysis provided a new insight to qualitatively and quantitatively showed the distribution of organic pollutants in the wastewater treatment system.

Low chlorine impurity might be beneficial in chlorine dioxide disinfection

Chlorine dioxide (ClO₂) is a prevalently used disinfectant alternative to chlorine, due to its effectiveness in pathogen inactivation and low yields of organic halogenated disinfection byproducts (DBPs). However, during ClO₂ generation, chlorine is inevitably introduced into the obtained ClO₂ solution as an "impurity", which could compromise the merits of ClO₂ disinfection. In this study, drinking water disinfection with ClO₂ containing 0‒25% chlorine impurity (i.e., at Cl₂ to ClO₂ mass ratios of 0‒25%) was simulated, and the effect of chlorine impurity on the DBP formation and developmental toxicity of the finished water was evaluated. With increasing the chlorine impurity in ClO₂, the chlorite level kept decreasing and the chlorate level gradually increased; meanwhile, an unexpected trend from decline to rise was observed for the total organic halogenated DBPs, with the minimum level appearing at 5% chlorine impurity. To unravel the mechanisms for the variations of organic halogenated DBPs with chlorine impurity, a quantitative kinetic model was developed to simulate the formation of chlorinated, brominated, and iodinated DBPs in the ClO₂-disinfected drinking water. The modeling results indicated that reactions involving iodide accounted for the decrease of organic halogenated DBPs at a relatively low chlorine impurity level. In accordance with DBP formation, ClO₂ with 5% chlorine impurity generated less toxic drinking water than pure ClO₂, while significantly higher developmental toxicity was induced until the chlorine impurity reached 25%. For E. coli inactivation, the presence of chlorine impurity enhanced the disinfection efficiency due to a synergistic effect of ClO₂ and chlorine. Therefore, disinfection practices with ClO₂ containing low chlorine impurity (e.g., <10%) might be favored (i.e., there is no need to eliminate low chlorine impurity in the ClO₂ solution), while those containing high chlorine impurity should be concerned.

Disinfection by-products in drinking water: Occurrence, toxicity and abatement

Disinfection means the killing of pathogenic organisms (e.g. bacteria and its spores, viruses, protozoa and their cysts, worms, and larvae) present in water to make it potable for other domestic works. The substances used in the disinfection of water are known as disinfectants. At municipal level, chlorine (Cl₂), chloramines (NH₂Cl, NHCl₂), chlorine dioxide (ClO₂), ozone (O₃) and ultraviolet (UV) radiations, are the most commonly used disinfectants. Chlorination, because of its removal efficiency and cost effectiveness, has been widely used as method of disinfection of water. But, disinfection process may add several kinds of disinfection by-products (DBPs) (∼600-700 in numbers) in the treated water such as Trihalomethanes (THM), Haloacetic acids (HAA) etc. which are detrimental to the human beings in terms of cytotoxicity, mutagenicity, teratogenicity and carcinogenicity. In water, THMs and HAAs were observed in the range from 0.138 to 458 μg/L and 0.16-136 μg/L, respectively. Thus, several regulations have been specified by world authorities like WHO, USEPA and Bureau of Indian Standard to protect human health. Some techniques have also been developed to remove the DBPs as well as their precursors from the water. The popular techniques of DBPs removals are adsorption, advance oxidation process, coagulation, membrane based filtration, combined approaches etc. The efficiency of adsorption technique was found up to 90% for DBP removal from the water.

Water toxicity evaluations: Comparing genetically modified bioluminescent bacteria and CHO cells as biomonitoring tools

The use of water for drinking and agriculture requires knowledge of its toxicity. In this study, we compared the use of genetically modified bioluminescent (GMB) bacteria whose luminescence increases in the presence of toxicants and Chinese Hamster Ovary (CHO) cells for the characterization of the toxicity of water samples collected from a lake and streams, hydroponic and aquaponic farms, and a wastewater treatment plant. GMB bacteria were used to probe genotoxicity, cytotoxicity and reactive oxygen species-induced effects in the whole water samples. Unlike GMB bacteria, the use of CHO cells requires XAD resin-based pre-concentration of toxic material present in water samples for the subsequent cytotoxicity assay. In addition to the examination of the toxicity of the water from the different sources, the GMB bacteria were also used to test the XAD extracts diluted to the concentrations causing 50% growth inhibition of the CHO cells. The two biomonitoring tools provided different results when they were used to test the above-mentioned diluted XAD extracts. A pre-concentration procedure based on adsorption by XAD resins with subsequent elution was not sufficient to represent the material responsible for the toxicity of the whole water samples toward the GMB bacteria. Therefore, the use of XAD resin extracts may lead to major underestimates of the toxicity of water samples. Although the toxicity findings obtained using the GMB bacteria and CHO cells may not correlate with each another, the GMB bacteria assay did provide a mechanism-specific biomonitoring tool to probe the toxicity of water samples without a need for the pre-concentration step.

Synergistic and antagonistic interactions among organic and metallic components of the ambient particulate matter (PM) for the cytotoxicity measured by Chinese hamster ovary cells

Although PM_2.5 toxicity is known to be related to its chemical composition, the effect of interactions among various particles' components on the toxicity is not well explored. To understand these interactions, especially metals and organic compounds on PM_2.5 cytotoxicity, we chose several redox-active substances known to be present in the ambient particles such as metals (Cu, Fe, and Mn) and quinones [9,10-phenanthraquinone (PQ), 1,2-naphthoquinone (1,2-NQ), 1,4-naphthoquinone (1,4-NQ), and 5-hydroxy-1,4-naphthoquinone (5,H-1,4-NQ)]. Cytotoxicity was assessed through a Chinese hamster ovary (CHO) cells assay and expressed by a median lethal concentration (LC₅₀). Two methods were employed to assess the interactions. In the first method, we tested the impact of nontoxic level of a component on the LC₅₀ of other components. In the second method, we mixed two components in different concentration ratios to expose the cells and calculated a mixture toxicity index (MTI). MTI is a composite value to quantify the nature of interactions such that the interactions are considered synergistic when MTI > 1, additive when 0 < MTI ≤ 1 and antagonistic when MTI < 0. The interactions between quinones and metals were largely synergistic by both methods. To further assess the environmental relevance of these mixtures, we extracted organic compounds termed as water-soluble Humic-like substances (HULIS) from real ambient PM samples and mixed them with individual metals. A similar pattern, as observed from the interaction of quinones and metals, was found. Moreover, the interactions became more synergistic as the relative concentration of metals with respect to water-soluble HULIS was decreased in these mixtures. With environmentally relevant mass concentration ratios of organics to metals (75-7500), the interactions were strongly synergistic (MTI = 1-115). These results indicate the importance of incorporating the interaction among various PM components for estimating the net toxicity of ambient PM_2.5.

Ammonia-Mediated Bromate Inhibition during Ozonation Promotes the Toxicity Due to Organic Byproduct Transformation

Ammonia (NH₄⁺) and hydrogen peroxide (H₂O₂) have been widely used to inhibit bromate formation during ozonation. However, organic byproducts can also pose a risk under these conditions. During bromate inhibition, the influence of NH₄⁺ and H₂O₂ on organic byproducts and their toxicity should be elucidated. Our study found that NH₄⁺ suppressed organic bromine, but might result in increased toxicity. Adding 0.5 mg/L of NH₄⁺-N substantially increased both the formation of cytotoxicity and genotoxicity (DNA double-strand breaks) of organic byproducts from 0.6 to 1.6 mg-phenol/L, and from 0.3 to 0.8 μg-4-NQO/L (0.5 mg/L Br^-, 5 mg/L O₃). NH₄⁺ decreased bromate, but increased the overall toxicity of the integrated byproducts (organic byproducts and bromate). Organic nitrogen measurements and ¹⁵N isotope analysis showed enhanced incorporation of nitrogen into organic matter when NH₄⁺ and Br^- coexisted during ozonation. NH₄⁺ decreased the formation of brominated acetonitriles, but enhanced the formation of brominated nitromethanes and brominated acetamides. These brominated nitrogenous byproducts were partially responsible for this increase in toxicity. Different from ammonia, H₂O₂ could reduce both bromate and the toxicity of organic byproducts. In the presence of 0.5 mg/L Br^- and 10 mg/L O₃, adding H₂O₂ (0.5 mM) substantially suppressed bromate, cytotoxicity formation and genotoxicity formation by 88%, 63% and 67%. This study highlights that focusing on bromate control with NH₄⁺ addition might result in higher toxicity. Efforts are needed to effectively control the toxicities of bromate and organic byproducts simultaneously.

Assessing Additivity of Cytotoxicity Associated with Disinfection Byproducts in Potable Reuse and Conventional Drinking Waters

Recent studies used the sum of the measured concentrations of individual disinfection byproducts (DBPs) weighted by their Chinese hamster ovary (CHO) cell cytotoxicity LC₅₀ values to estimate the DBP-associated cytotoxicity of disinfected waters. This approach assumed that cytotoxicity was additive rather than synergistic or antagonistic. In this study, we evaluated whether this assumption was valid for mixtures containing DBPs at the concentration ratios measured in authentic disinfected waters. We examined the CHO cell cytotoxicity of defined DBP mixtures based on the concentrations of 43 regulated and unregulated DBPs measured in eight drinking and potable reuse waters. The hypothesis for additivity was supported using three experimental approaches. First, we demonstrated that the calculated additive toxicity (CAT) and bioassay-based calculated additive toxicity (BCAT) of the DBP mixtures agree within 12% on a median basis. We also found an additive toxicity response (CAT ≈ BCAT) between the regulated and unregulated DBP classes. Finally, the empirical biological cytotoxicity of the DBP subset mixtures, independent of the calculated toxicity, was additive. These results support the validity of using the sum of cytotoxic potency-weighted DBP concentrations as an estimate of the CHO cell cytotoxicity associated with known DBPs in real disinfected waters.

Influence of Anaerobic Mesophilic and Thermophilic Digestion on Cytotoxicity of Swine Wastewaters

Recycling wastewater from animal production for fertilizers using anaerobic digestion (AD) is a common method to recover the nutrients in the digestate. However, the digestate toxicity is not well understood because AD is mainly designed for chemical oxygen demand reduction. This study determined the toxicity during AD and the controlling factors with the goal to improve digestate safety during farmer handling to reuse the nutrients. Thermophilic and mesophilic AD of two swine wastewater sources were studied. Mammalian cell cytotoxicity revealed that the effluent after thermophilic digestion was at least 69% more toxic than the mesophilic effluent, owing to higher ammonia and total organic carbon in the former. Ammonia accounted for >55% total cytotoxicity, and the organics of the thermophilic digestate were twice more toxic than those in the mesophilic digestate. Despite less toxicity contribution than the ammonia, the organics did demonstrate significant adverse effects on the thiol-mediated cellular protection mechanism. For swine wastewater nutrient recovery, converting ammonia to less toxic nitrogen forms could lower the toxic hazard of the AD digestate. With much less ammonia, the organics would be the remaining decisive factor for toxicity, which is favorably reduced using thermophilic AD over mesophilic. If the ammonia is not reduced, mesophilic AD would generate a less toxic digestate.

Strengths of correlations with formation of chlorination disinfection byproducts: effects of predictor type and other factors

Measurements of the UV-Vis absorbance (Abs) and intensity of fluorescence emission (Fluor), as well as of concentrations of total or dissolved organic carbon (OC) in aqueous samples are commonly used to estimate the potential for disinfection byproducts (DBPs) formation during water chlorination. In this work, based on 574 linear associations collected from 70 experimental research papers published over the period of 1997-2019, the strengths of the correlations of Abs, Fluor, and OC with DBPs concentrations are compared. The correlations were expressed as approximately normally distributed Z-scores using Fisher variance-stabilizing transformation. The effects of specific prediction method, chlorination agent, water source, and DBPs type, with consideration of possible effects due to the presence of bromide, are examined against Z-scores by ANOVA, testing main effects and some variables interactions. The performed analysis is a first attempt to expose differences and patterns in correlation strengths associated with DBPs formation, based on systematically covered broad existing literature. Abs and OC concentration of water samples tend to demonstrate the strongest correlations with DBPs formation as compared with specific UV absorbance (SUVA) or intensity of fluorescence emission. Correlations of DBPs formation during chloramination demonstrated weaker strengths as compared with other chlorination agents, suggesting more caution in predicting DBPs concentrations, based on simple descriptors such as Abs, OC, and Fluor. In a series of different water types, the correlations with DBPs formation are expected to be enhanced, when wastewater is chlorinated. Non-fluorescent matter may be an important contributor to DBPs formation during water chlorination. When fluorescence intensity is considered as a predicting tool, choosing humic-like rather than proteinaceous fluorescence may enhance the strengths of the correlations with DBPs formation. Different performances of Abs, OC, and Fluor in correlating with DBPs formation may be beneficial for their concurrent use helping to optimize removal of different DBPs precursors.

Emergence and fate of volatile iodinated organic compounds during biological treatment of oil and gas produced water

Oil and gas (O&G) production in the United States is expected to grow at a substantial rate over the coming decades. Environmental sustainability related to water consumption during O&G extraction can be addressed through treatment and reuse of water returning to the surface after well completion. Water quality is an important factor in reuse applications, and specific treatment technologies must be utilized to remove different contaminants. Among others, biological active filtration can remove dissolved organic matter as a pre-treatment for surface discharge or to facilitate reuse in such applications as hydraulic fracturing, dust suppression, road stabilization, and crop irrigation. Yet, the formation of byproducts during treatment of O&G wastewater remains a concern when evaluating reuse applications. In this study, we investigated the previously unnoticed biotic formation of iodinated organic compounds (IOCs) such as triiodomethane during biological treatment of O&G wastewater for beneficial reuse. Iodide and several IOCs were quantified in O&G produced water before and after treatment in biological active filters filled with different media types over 13 weeks of operation. While iodide and total IOCs were measured at concentrations <53 mg/L and 147 μg/L, respectively, before biological treatment, total IOCs were measured at concentrations close to 4 mg/L after biological treatment. Triiodomethane was the IOC that was predominantly present. IOC formation had a negative strong correlation (r = -0.7 to -0.8, p < 0.05, n = 9) with iodide concentration in the treated O&G wastewater, indicating that iodide introduced to the biological active filter system was utilized in various reactions, including biologically mediated halogenation of organic matter. Additionally, iodide-oxidizing bacteria augmented in the treated produced water pointed towards potential negative environmental implications when releasing biologically treated halide-rich wastewater effluents to the aquatic environment.

Global Transcriptional Analysis of Nontransformed Human Intestinal Epithelial Cells (FHs 74 Int) after Exposure to Selected Drinking Water Disinfection By-Products

BACKGROUND

Drinking water disinfection inadvertently leads to the formation of numerous disinfection by-products (DBPs), some of which are cytotoxic, mutagenic, genotoxic, teratogenic, and potential carcinogens both in vitro and in vivo.

OBJECTIVES

We investigated alterations to global gene expression (GE) in nontransformed human small intestine epithelial cells (FHs 74 Int) after exposure to six brominated and two chlorinated DBPs: bromoacetic acid (BAA), bromoacetonitrile (BAN), 2,6-dibromo-p-benzoquinone (DBBQ), bromoacetamide (BAM), tribromoacetaldehyde (TBAL), bromate (BrO3-), trichloroacetic acid (TCAA), and trichloroacetaldehyde (TCAL).

METHODS

Using whole-genome cDNA microarray technology (Illumina), we examined GE in nontransformed human cells after 4h exposure to DBPs at predetermined equipotent concentrations, identified significant changes in gene expression (p≤0.01), and investigated the relevance of these genes to specific toxicity pathways via gene and pathway enrichment analysis.

RESULTS

Genes related to activation of oxidative stress-responsive pathways exhibited fewer alterations than expected based on prior work, whereas all DBPs induced notable effects on transcription of genes related to immunity and inflammation.

DISCUSSION

Our results suggest that alterations to genes associated with immune and inflammatory pathways play an important role in the potential adverse health effects of exposure to DBPs. The interrelationship between these pathways and the production of reactive oxygen species (ROS) may explain the common occurrence of oxidative stress in other studies exploring DBP toxicity. Finally, transcriptional changes and shared induction of toxicity pathways observed for all DBPs caution of additive effects of mixtures and suggest further assessment of adverse health effects of mixtures is warranted. https://doi.org/10.1289/EHP4945.

Toxicity of chlorinated and ozonated wastewater effluents probed by genetically modified bioluminescent bacteria and cyanobacteria Spirulina sp

Chlorination and ozonation of various waters may be associated with the formation of toxic disinfection byproducts (DBPs) and cause health risks to humans. Monitoring the toxicity of chlorinated and ozonated water and identification of different toxicity mechanisms are therefore required. This study is one of its kind to examine the toxic effects of chlorinated and ozonated wastewater effluents on three genetically modified bioluminescent bacteria, in comparison to the naturally isolated cyanobacteria, Spirulina strains as test systems. Three different secondary wastewater effluents were collected from treatment plants, chlorinated using sodium hypochlorite (at 1 and 10 mg L^-1 of chlorine) or treated using 3-4 mg L^-1 of ozone at different contact times. As compared to cyanobacterial Spirulina sp., the genetically modified bacteria enhancing bioluminescence at the presence of stress agents demonstrated greater sensitivity to the toxicity induction and have also provided mechanism-specific responses associated with genotoxicity, cytotoxicity and reactive oxygen species (ROS) generation in wastewater effluents. Effects of effluent chlorination time and chlorine concentration revealed by means of bioluminescent bacteria suggest the formation of genotoxic and cytotoxic DBPs followed with their possible disappearance at longer times. Ozonation could degrade genotoxic compounds in some effluents, but the cytotoxic potential of wastewater effluents may certainly increase with ozonation time. No induction of ROS-related toxicity was detected in either chlorinated or ozonated wastewater effluents. UV absorbance- and fluorescence emission-based spectroscopic characteristics may be variously correlated with changes in genotoxicity in ozonated effluents, however, no associations were obtained in chlorinated wastewater effluents. The bacterial response to the developed mechanism-specific toxicity differs among wastewater effluents, reflecting variability in effluent compositions.

Underestimated risk from ozonation of wastewater containing bromide: Both organic byproducts and bromate contributed to the toxicity increase

Ozonation is widely used in wastewater treatment but the associated byproduct formation is a concern. When ozonation is used in the presence of bromide, bromate is generally considered as a major byproduct, and few studies have examined the toxicity of organic byproducts. This study was designed to investigate the cytotoxicity, genotoxicity and DNA/RNA oxidative damage to Chinese hamster ovary (CHO) cells of organic extracts from ozonated wastewater in the absence or presence of bromide. Ozonation effectively detoxified secondary effluents containing no bromide. However, ozonation significantly increased the cytotoxicity and genotoxicity of the effluents spiked with a bromide concentration as low as 100 μg/L, compared with the bromide-free effluent. When the bromide concentration in the effluent was increased to 2000 μg/L, ozonation resulted in 1.4-1.5 times the cytotoxicity and 1.5-5.0 times the genotoxicity of the non-ozonated secondary effluent. Besides, the oxidative stress (including reactive oxygen species and reactive nitrogen species) and DNA/RNA oxidative damage also became more severe and a high level of 8-hydroxy-(deoxy)guanosine was detected in the CHO cell nucleus in the presence of bromide. Cytotoxicity and genotoxicity were found to increase with the formation of total organic bromine (TOBr). When the CHO cells were exposed to both the organic byproducts and bromate formed from wastewater containing 500 and 2000 μg/L bromide, bromate significantly increased oxidative stress and DNA/RNA oxidative damage at relatively high concentration factors, suggesting both organic byproduct and bromate can contribute to toxicity increase. During ozonation of the effluent containing bromide, particular attention should be paid to the organic byproducts such as TOBr.

Disinfection byproducts and their toxicity in wastewater effluents treated by the mixing oxidant of ClO2/Cl2

Mixing oxidant of chlorine dioxide (ClO₂) and chlorine (Cl₂) often applied in water disinfection. Two secondary wastewater effluents at different ammonium-N levels (0.1 and 1.6 mg N L^-1) were treated with the mixing oxidant (ClO₂/Cl2) to evaluate the formation of disinfection byproducts (DBPs) and the associated cytotoxicity of treated wastewaters. The total chlorine concentrations of ClO₂ and Cl₂ were maintained at 10 mg L^-1 as Cl₂ with varied mixing ratios of ClO₂ to Cl₂. The formation of 37 halogenated DBPs, including nitrogenous, brominated and iodinated analogues, and 2 inorganic DBPs (chlorite and chlorate) was examined. The sum concentrations of the halogenated DBPs were reduced remarkably with decreasing Cl₂ percentages, but each individual DBP group had distinct features. The regulated trihalomethanes reduced the most when ClO₂ was present in chlorination, but decreasing Cl₂ percentage from 70% to 30% was not quite effective to reduce the formation of iodinated trihalomethanes, haloacetic acids and haloacetontriles in low ammonium-N wastewater. The bromine and iodine substitution factors tend to increase with decreasing Cl₂ percentages, indicating that destruction of DBP precursors by ClO₂ favored bromine and iodine incorporation. Additionally, decreasing Cl₂ percentages in the mixing oxidant (ClO₂/Cl₂) was often accompanied with lower chlorate formation but higher chlorite formation. The toxicity of treated wastewaters was evaluated through two approaches: the calculated cytotoxicity based on the concentrations of detected DBPs and the experimental cytotoxicity using the Chinese hamster ovary (CHO) cells. The calculated cytotoxicity decreased with decreasing Cl₂ percentages, with haloacetonitriles and haloacetaldehydes as predominate contributors. However, the experimental cytotoxicity tests showed that treatment of high ammonium-N wastewater with ClO₂/Cl₂ exhibited considerable higher (> 3 times) cytotoxicity potency than using single disinfectant.

Toxicological Comparison of Water, Wastewaters, and Processed Wastewaters

Drinking water utilities will increasingly rely on alternative water sources in the future, including wastewater reuse. Safety must be assured in the application of advanced oxidation processes (AOPs) and supporting treatments for wastewater effluent reuse. This study developed toxicological profiles for source and tap waters, wastewaters, and treated effluents by different processes from four military installation locations. The objective of this study was to evaluate the toxicity of extracted organics from diverse source waters and after reuse treatments. The toxicity analyses included thiol reactivity, mammalian cell cytotoxicity, and genotoxicity. Differences in toxicity between source or tap waters and effluents from wastewater treatment processes supported AOP treatment to reduce risks of potable reuse. An anoxic and aerobic activated sludge process followed by sand filtration controlled toxicity to levels similar to a municipal drinking water. An anaerobic membrane bioreactor process exceeded the toxicity levels of a typical drinking water. Two AOP processes (ultraviolet (UV) + reverse osmosis (RO) + chlorination (NaOCl) or RO + UV-H₂O₂ + NaOCl) significantly reduced toxicity. The integration of the wastewater systems with ultrafiltration, AOP, and RO was effective to reduce the toxicity to levels comparable to, or better than, tap water samples.