Effect of Soil Organic Matter, Soil pH, and Moisture Content on Solubility and Dissolution Rate of CuO NPs in Soil

Particle morphology and soil properties affect the retention of copper oxide nanoparticles in agricultural soils

The interaction between nanoscale copper oxides (nano-CuOs) and soil matrix significantly affects their fate and transport in soils. This study investigates the retention of nano-CuOs and Cu2+ ions in ten typical agricultural soils by employing the Freundlich adsorption model. Retention of nano-CuOs and Cu2+ in soils was well fitted by the Freundlich model. The retention parameters (KD, KF, and N) followed an order of CuO NTs > CuO NPs > Cu2+, highlighting significant impact of nano-CuOs morphology. The KF and N values of CuO NPs/Cu2+ were positively correlated with soil pH and electrical conductivity (EC), but exhibited a weaker correlation for CuO NTs. Soil pH and/or EC could be used to predict KF and N values of CuO NPs or CuO NTs, with additional clay content should be included for Cu2+.The different relationship between retention parameters and soil properties may suggest that CuO NTs retention mainly caused by agglomeration, whereas adsorption and agglomeration were of equal importance to CuO NPs. The amendment of Ca2+ at low and medium concentration promoted retention of nano-CuOs in alkaline soils, but reduced at high concentration. These findings provided critical insights into the fate of nano-CuOs in soil environments, with significant implications for environmental risk assessment and soil remediation strategies.

Nano-enabled strategies to promote safe crop production in heavy metal(loid)-contaminated soil

Nanobiotechnology is a potentially safe and sustainable strategy for both agricultural production and soil remediation, yet the potential of nanomaterials (NMs) application to remediate heavy metal(loid)-contaminated soils is still unclear. A meta-analysis with approximately 6000 observations was conducted to quantify the effects of NMs on safe crop production in soils contaminated with heavy metal(loid) (HM), and a machine learning approach was used to identify the major contributing features. Applying NMs can elevate the crop shoot (18.2 %, 15.4-21.2 %) and grain biomass (30.7 %, 26.9-34.9 %), and decrease the shoot and grain HM concentration by 31.8 % (28.9-34.5 %) and 46.8 % (43.7-49.8 %), respectively. Iron-NMs showed a greater potential to inhibit crop HM uptake compared to other types of NMs. Our result further demonstrates that NMs application substantially reduces the potential health risk of HM in crop grains by human health risk assessment. The NMs-induced reduction in HM accumulation was associated with decreasing HM bioavailability, as well as increased soil pH and organic matter. A random forest model demonstrates that soil pH and total HM concentration are the two significant features affecting shoot HM accumulation. This analysis of the literature highlights the significant potential of NMs application in promoting safe agricultural production in HM-contaminated agricultural lands.

Sustained release of Zn from zinc sulfide nanoparticles (ZnS NPs) amplified the bioaccessibility of Zn in soil: Adsorption dynamics and dissolution kinetics

Controlled-release micronutrient supplementation to provide better bioavailable zinc (Zn) under alkaline soil conditions is a concept of commercial pertinence for sustainable agriculture. High pH stable nano-scaled ZnS is the material under study in the present investigation where the adsorption dynamics and dissolution kinetics of sono-chemically synthesized zinc sulfide nanoparticles (ZnS NPs) were evaluated in comparison to ZnSO4 in Lufa 2.2 soil for supplementation of Zn. The mechanism of adsorption of ZnS NPs and ZnSO4 onto Lufa 2.2 soil was well explained by fitting into the Freundlich adsorption model and pseudo-second order equation. ZnS NPs reflected the stronger ability to get adsorbed on the Lufa 2.2 soil as compared to metal ions, due to higher surface reactivity of NPs and higher Kf value (0.557) than ZnSO4 (0.463). Time relevant enhancement in extractability of Zn from ZnS NPs amended soil and diminution in extractability of Zn from ZnSO4 spiked soil was observed in bioavailability studies. The increased labile pool of Zn from ZnS NPs amended soil over time was due to their slow dissolution in soil and could be adjusted to consider as "sustained released ZnS NPs". Dissolution of ZnS nanoparticles (NPs) in Lufa 2.2 soil adhered to the first-order extraction model, exhibiting extended half-lives of 27.72 days (low dose) and 28.87 days (high dose). This supported prolonged stability, increased reactivity, and reduced ecological risk compared to conventional Zn salt fertilizers, promoting enhanced crop productivity.

Recent advances on environmental behavior of Cu-based nanomaterials in soil-plant system: A review

In recent years, copper-based nanomaterials (Cu-based NMs) have shown great potential in promoting agriculture development due to their special physicochemical characteristics. With the mass production and overuse of Cu-based NMs, there are potential effects on the soil-plant environment. Soil organisms, especially soil microorganisms, play a significant part in terrestrial or soil ecosystems; plants, as indirect organisms with soil-related Cu-based NMs, may affect human health through plant agricultural products. Understanding the accumulation and transformation of Cu-based NMs in soil-plant systems, as well as their ecotoxicological effects and potential mechanisms, is a prerequisite for the scientific assessment of environmental risks and safe application. Therefore, based on the current literature, this review: (i) introduces the accumulation and transformation behaviors of Cu-based NMs in soil and plant systems; (ii) focuses on the ecotoxicological effects of Cu-based NMs on a variety of organisms (microorganisms, invertebrates, and plants); (iii) reveals their corresponding toxicity mechanisms. It appears from studies hitherto made that both Cu-based NMs and released Cu2+ may be the main reasons for toxicity. When Cu-based NMs enter the soil-plant environment, their intrinsic physicochemical properties, along with various environmental factors, could also affect their transport, transformation, and biotoxicity. Therefore, we should push for intensifying the multi-approach research that focuses on the behaviors of Cu-based NMs in terrestrial exposure environments, and mitigates their toxicity to ensure the promotion of Cu-based NMs.

Plant Growth-Promoting Rhizobacteria (PGPR) Assisted Bioremediation of Heavy Metal Toxicity

Due to a variety of natural and anthropogenic processes, heavy metal toxicity of soil constitutes a substantial hazard to all living beings in the environment. The heavy metals alter the soil properties, which directly or indirectly influence the agriculture systems. Thus, plant growth-promoting rhizobacteria (PGPR)-assisted bioremediation is a promising, eco-friendly, and sustainable method for eradicating heavy metals. PGPR cleans up the heavy metal-contaminated environment using various approaches including efflux systems, siderophores and chelation, biotransformation, biosorption, bioaccumulation, precipitation, ACC deaminase activity, biodegradation, and biomineralization methods. These PGPRs have been found effective to bioremediate the heavy metal-contaminated soil through increased plant tolerance to metal stress, improved nutrient availability in soil, alteration of heavy metal pathways, and by producing some chemical compounds like siderophores and chelating ions. Many heavy metals are non-degradable; hence, another remediation approach with a broader scope of contamination removal is needed. This article also briefly emphasized the role of genetically modified PGPR strains which improve the soil's degradation rate of heavy metals. In this regard, genetic engineering, a molecular approach, could improve bioremediation efficiency and be helpful. Thus, the ability of PGPRs can aid in heavy metal bioremediation and promote a sustainable agricultural soil system.

Bioavailability and Toxicity of nano Copper Oxide to Pakchoi (Brassica Campestris L.) as Compared with bulk Copper Oxide and Ionic Copper

The increasing use of copper oxide nano particles (nCuO) as nano-fertilizers and pesticides have raised concerns over their impact on soil environment and agricultural products. In this study, two nCuO with different shapes, namely spherical nCuO (CuO NPs) and tubular nCuO (CuO NTs), were selected to investigate their bioavailability and toxicity to pakchoi in two soils with different properties. At the meantime, CuO bulk particles (CuO BPs) and Cu(NO3)2 were used for comparison. Results showed that all the Cu treatments increased the DTPA extractable (DTPA-Cu) concentrations in GD soil (acidic) more than in HN soil (alkaline). The DTPA-Cu concentrations increased in the order of Cu(NO3)2 ≈ CuO NPs > CuO BPs ≈ CuO NTs in GD soil and Cu(NO3)2 > CuO NPs > CuO BPs ≈ CuO NTs in HN soil. While for the contents of Cu in the aerial parts of pakchoi, the order is CuO NPs > Cu(NO3)2 > CuO NTs ≈ CuO BPs in GD soil and CuO NPs ≈ Cu(NO3)2 > CuO BPs ≈ CuO NTs in HN soil. Only CuO NPs reduced pakchoi biomass in GD soil. There are no significant difference among CuO NPs, CuO BPs, and Cu(NO3)2 in reducing the chlorophyll contents in pakchoi in HN soil, whereas in GD soil, CuO NPs and CuO BPs led to significantly lower chlorophyll contents in pakchoi compared to Cu(NO3)2. Additionally, CuO NPs and Cu(NO3)2 increased Mn and Mo in pakchoi leaf in HN soil, while increased Zn in pakchoi leaf in GD soil. These results indicated that CuO NPs showed higher or comparable toxicity and bioavailability to pakchoi compared with Cu(NO3)2 depending on soil properties, and nCuO are more easily to be transferred from roots to the aerial parts than CuO BPs and Cu(NO3)2.

Nanomaterials and biochar mediated remediation of emerging contaminants

The unrestricted release of various toxic substances into the environment is a critical global issue, gaining increased attention in modern society. Many of these substances are pristine to various environmental compartments known as contaminants/emerging contaminants (ECs). Nanoparticles and emerging sorbents enhanced remediation is a compelling methodology exhibiting great potential in addressing EC-related issues and facilitating their elimination from the environment, particularly those compounds that demonstrate eco-toxicity and pose considerable challenges in terms of removal. It provides a novel technique enabling the secure and sustainable removal of various ECs, including persistent organic compounds, microplastics, phthalate, etc. This extensive review presents a critical perspective on the current advancements and potential outcomes of nano-enhanced remediation techniques such as photocatalysis, nano-sensing, nano-enhanced sorbents, bio/phyto-remediation, which are applied to clean-up the natural environment. In addition, when dealing with residual contaminants, special attention is paid to both health and environmental implications; therefore, an evaluation of the long-term sustainability of nano-enhanced remediation methods has been considered. The integrated mechanical approaches were thoroughly discussed and presented in graphical forms. Thus, the critical evaluation of the integrated use of most emerging remediation technologies will open a new dimension in environmental safety and clean-up program.

Evidence for the transportation of aggregated microplastics in the symplast pathway of oilseed rape roots and their impact on plant growth

As an emerging contaminant, microplastics are absorbed by crops, causing diverse impacts on plants. Plants may have different physiological responses to different uptake modes of microplastics various stage of growth. In this study, the distribution of polystyrene (PS) microspheres in the roots of oilseed rape and the physiological responses at different growth stages were investigated by confocal laser scanning microscope, scanning electron microscopy, and biochemical analysis. This study, conducted via scanning electron microscopy, discovered that agglomerates of microspheres, rather than individual plastic pellets, were taken up by plant roots in solution for the first time. The agglomerates subsequently migrate into the vascular bundles of the root system. Moreover, this study provided the proof for the first time that PS is transported in plants via the symplast system. On the physiological and biochemical function, the exposure of PS at the flowering and bolting stages caused oxidative stress on oilseed rape. That is, the addition of PS with different particle sizes significantly increased peroxidase (POD), malondialdehyde (MDA), photosynthetic rate, chlorophyll content and inhibited superoxide dismutase (SOD) content in oilseed rape at different developmental stages. These changes regulated the chloroplast structure and chlorophyll synthesis, maintained a high photosynthetic rate, and mitigated the toxicity of PS. In addition, correlation analysis showed that MDA and citric acid contents were significantly positively correlated with chlorophyll contents (p < 0.05), which suggested that the 80 nm PS treatment stimulated organic acid secretion in oilseed rape at the bolting stage to maintain a higher chlorophyll content. This study expands the current understanding of the effects of microplastics on crop growth, and the results holding significant implications for exploring the impact of microplastics on vegetables during various developmental stages and for future risk assessment.

Toxicity Mechanisms of Nanoplastics on Crop Growth, Interference of Phyllosphere Microbes, and Evidence for Foliar Penetration and Translocation

Despite the increasing prevalence of atmospheric nanoplastics (NPs), there remains limited research on their phytotoxicity, foliar absorption, and translocation in plants. In this study, we aimed to fill this knowledge gap by investigating the physiological effects of tomato leaves exposed to differently charged NPs and foliar absorption and translocation of NPs. We found that positively charged NPs caused more pronounced physiological effects, including growth inhibition, increased antioxidant enzyme activity, and altered gene expression and metabolite composition and even significantly changed the structure and composition of the phyllosphere microbial community. Also, differently charged NPs exhibited differential foliar absorption and translocation, with the positively charged NPs penetrating more into the leaves and dispersing uniformly within the mesophyll cells. Additionally, NPs absorbed by the leaves were able to translocate to the roots. These findings provide important insights into the interactions between atmospheric NPs and crop plants and demonstrate that NPs' accumulation in crops could negatively impact agricultural production and food safety.

Soil moisture dynamics regulates the release rates and lability of copper in contaminated paddy soils

The climate changes have caused more extreme precipitation and drought events in the field and have exacerbated the severity of wet-dry events in soils, which will inevitably lead to severe fluctuations in soil moisture content. Soil moisture content has been recognized to influence the distribution of heavy metals, but how temporal changes of soil moisture dynamics affect the release rates and lability of heavy metals is still poorly understood, which precludes accurate prediction of environmental behavior and environmental risk of heavy metals in the field. In this study, we combined experimental and modeling approaches to quantify copper release rates and labile copper fractions in two paddy soils from southern China under different moisture conditions. Our kinetic data and models showed that the release rates and lability of copper were highly associated with the soil moisture contents, in which, surprisingly, high soil moisture contents effectively reduced the release rates of copper even with little changes in the reactive portions of copper in soils. A suite of comprehensive characterization on soil solid and solution components along the incubation suggested that soil microbes may regulate soil copper lability through forming microbially derived organic matter that sequestered copper and by increasing soil particle aggregation for protecting copper from release. This study highlights the importance of incorporating soil moisture dynamics into future environmental models. The experimental and modeling approaches in this study have provided basis for further developing predictive models applicable to paddy soils with varying soil moisture under the impact of climate change.

Impact of nCuO containing treated wastewater on soil microbes and dissolved organic matter in paddy field leachate

Using treated wastewater (TWW) resources in agriculture is a major pathway for disseminating nanoparticles. Copper-oxide nanoparticles (nCuO) offer potential benefits, but their presence in the environment poses risks to agricultural and environmental sustainability. This study examined soil microbial transformations and the composition of leachate dissolved organic matter (DOM) of paddy soils irrigated with nCuO-contaminated TWW at different concentrations (T2: 0.02 mgL-1, T3: 0.2 mgL-1, T4: 2.0 mgL-1) and examined the differences in Cu source (T5: 0.2 mgL-1 CuSO4). Results showed negative impacts on the absolute microbial abundance with up to 46 % reduction relative to the control treatment (T1). Changes in relative abundance of specific microbes at the genus level deviated from the corresponding phyla. Acidobacteria, Actinobacteria, Chloroflexi, and Verrucomicrobia phyla increased in the surface (0-3 cm) and subsurface (3-15 cm) layers responding differently to nCuO. In the 0-3 cm layer, Nitrospirae, Euryarchaeota, and Crenarchaeota increased, but only Dechloromonas genus from Proteobacteria increased with increasing nCuO. No significant variations were observed in the DOM composition, except in T4, which had a significantly low content of dissolved organic carbon (DOC), total dissolved nitrogen, and terrestrial humic-like and protein-like components. Ninety-eight distinct genera were identified, of which 44%, including 15 bacteria and two archaea, varied between the surface and subsurface, among treatments, and significantly correlated with more DOM parameters in the subsurface. T4 had the highest microbial diversity in the 0-3 layer, and Cu treatments slightly increased the diversity index in the subsurface. Moreover, the effects differed by Cu source, with T3 showing 10 % more reduction in the subsurface and 17 % less reduction in the surface than T5. The variable microbial responses to nCuO and their strong correlations with DOM highlight the need to consider the potential consequences of low nCuO concentrations on biogeochemical cycles.

The effect of the synergistic thermal treatment and stabilization on the transformation and transportation of arsenic, chromium, and cadmium in soil

Thermal treatments commonly used to remedy organic-contaminated soils can inadvertently impact the behavior of non-targeted pollutants, notably heavy metal(loid)s in soil. This study introduces an integrated calcination-stabilization remediation strategy employing steel slag as a stabilizing agent, with a focus on elucidating the transformations and remobilization tendencies of As, Cr, and Cd. Thermal treatment alters the mobility of these elements by modifying soil properties, with pH and redox conditions playing pivotal roles. After anaerobic calcination, the leaching concentrations of As reached 163 μg L-1, far surpassed 7.57 μg L-1 after the aerobic calcination. Although Cr and As share oxygen-containing anion forms, they display opposing leaching tendencies after thermal treatment. At 400 °C, Cr leaching from aerobically treated soil reaches 64.5 mg L-1, dropping to 6.63 mg L-1 after anaerobic heating due to pH-induced Cr(OH)3 formation. Thermal treatment significantly amplifies the leaching of Cd cations. In contrast to the leaching concentration of 122 μg L-1 in the untreated soil, aerobic and anaerobic heating (400 °C) resulted in leaching concentrations of 896 μg L-1 and 132 μg L-1, respectively. Noteworthy, the integrated treatment (400 °C anaerobically) decreases leached As and Cd concentrations to 68.3 μg L-1 and 15.4 μg L-1, attributed to stabilizer alkalinity and porosity. Column leaching shows initial rapid release followed by continuous behavior for As and Cd, with the average leaching concentrations of the remediated soil decreasing to 60.5 μg L-1 and 1.32 μg L-1, ensuring safe backfilling. In conclusion, this study contributes to the understanding of the mobility and stabilization of heavy metal(loid)s subsequent to the integrated calcination-stabilization process.

Cd2+ Sorption Alterations in Ultisol Soils Triggered by Different Engineered Nanoparticles and Incubation Times

The progressive influx of engineered nanoparticles (ENPs) into the soil matrix catalyses a fundamental transformation in the equilibrium dynamics between the soil and the edaphic solution. This all-encompassing investigation is geared towards unravelling the implications of an array of ENP types, diverse dosages and varying incubation durations on the kinetics governing Cd2+ sorption within Ultisol soils. These soils have been subjected to detailed characterizations probing their textural and physicochemical attributes in conjunction with an exhaustive exploration of ENP composition, structure and morphology. To decipher the intricate nuances of kinetics, discrete segments of Ultisol soils were subjected to isolated systems involving ENP dosages of 20 and 500 mg ENPs·kg-1 (AgNPs, CuNPs and FeNPs) across intervals of 1, 3 and 6 months. The comprehensive kinetic parameters were unveiled by applying the pseudo-first-order and pseudo-second-order models. At the same time, the underlying sorption mechanisms were studied via the intra-particle diffusion model. This study underscores the substantial impact of this substrate on the kinetic behaviours of contaminants such as Cd, emphasizing the need for its consideration in soil-linked economic activities and regulatory frameworks to optimize resource management.

Espial: Electrochemical Soil pH Sensor for In Situ Real-Time Monitoring

We present a first-of-its-kind electrochemical sensor that demonstrates direct real-time continuous soil pH measurement without any soil pre-treatment. The sensor functionality, performance, and in-soil dynamics have been reported. The sensor coating is a composite matrix of alizarin and Nafion applied by drop casting onto the working electrode. Electrochemical impedance spectroscopy (EIS) and squarewave voltammetry (SWV) studies were conducted to demonstrate the functionality of each method in accurately detecting soil pH. The studies were conducted on three different soil textures (clay, sandy loam, and loamy clay) to cover the range of the soil texture triangle. Squarewave voltammetry showed pH-dependent responses regardless of soil texture (while electrochemical impedance spectroscopy's pH detection range was limited and dependent on soil texture). The linear models showed a sensitivity range from -50 mV/pH up to -66 mV/pH with R2 > 0.97 for the various soil textures in the pH range 3-9. The validation of the sensor showed less than a 10% error rate between the measured pH and reference pH for multiple different soil textures including ones that were not used in the calibration of the sensor. A 7-day in situ soil study showed the capability of the sensor to measure soil pH in a temporally dynamic manner with an error rate of less than 10%. The test was conducted using acidic and alkaline soils with pH values of 5.05 and 8.36, respectively.

Alleviation of chromium stress in plants using metal and metal oxide nanoparticles

Chromium (Cr), one of the hazardous pollutants, exists predominantly as Cr(VI) and Cr(III) in the environment. Cr(VI) is more toxic than Cr(III) due to its high mobility and solubility. Elevated levels of Cr in agricultural soil due to various anthropogenic activities cause Cr accumulation in plants, resulting in a significant reduction in plant yield and quality due to Cr-induced physiological, biochemical and molecular alterations. It can infiltrate the food chain through crop plants and cause harmful effects in humans via biomagnification. Cr(VI) is linked to cancer in humans. Therefore, mitigation strategies are required to remediate Cr-polluted soils and limit its accumulation in plants for safe food production. Recent research on metal and metal oxide nanoparticles (NPs) has shown that they can effectively reduce Cr accumulation and phytotoxicity. The effects of these NPs are influenced by their type and dose, exposure method, plant species and experimental settings. In this review, we present an up-to-date compilation and comprehensive analysis of the existing literature regarding the process of uptake and distribution of Cr and impact and potential mechanisms of metal and metal oxide nanoparticles led mitigation of Cr-induced stress in plants. We have also discussed recent developments, existing research gaps and future research directions in the field of Cr stress mitigation by NPs in plants. Overall, this review can provide valuable insights in reducing Cr accumulation and toxicity using metal and metal oxide nanoparticles, thereby promoting safe and sustainable cultivation of food and phytostabilization of Cr-polluted soil.

Effect of methods application of copper nanoparticles in the growth of avocado plants

The aim of this greenhouse study was to evaluate root irrigation, foliar spray, and stem injection in order to find the best method for the nanofertilization of avocado plants with green synthesized CuNPs. One-year-old avocado plants were supplied four times (every 15 days) with 0.25 and 0.50 mg/ml of CuNPs through the three fertilization methods. Stem growth and new leaf formation were evaluated over time and after 60 days of CuNPs exposure, several plant traits (root growth, fresh and dry biomass, plant water content, cytotoxicity, photosynthetic pigments, and total Cu accumulation in plant tissues) were evaluated for CuNPs improvement. Regarding the control treatment, stem growth and new leaf appearance were increased by 25 % and 85 %, respectively, by the CuNPs supply methods of foliar spray>stem injection>root irrigation, with little significant differences among NPs concentrations. Avocado plants supplied with 0.25 and 0.50 mg/ml CuNPs maintained a hydric balance and cell viability ranged from 91 to 96 % through the three NPs application methods. TEM did not reveal any ultrastructural organelle changes induced by CuNPs in leaf tissues. The concentrations of CuNPs tested were not high enough to exert deleterious effects on the photosynthetic machinery of avocado plants, but photosynthetic efficiency was also found to be improved. The foliar spray method showed improved uptake and translocation of CuNPs, with almost no loss of Cu. In general, the improvement in plant traits indicated that the foliar spray method was the best for nanofertilization of avocado plants with CuNPs.

Environmental implication of MoS2 nanosheets: Effects on maize plant growth and soil microorganisms

Molybdenum disulfide (MoS₂) nanosheets have been used extensively in a variety of fields including medical and industrial. However, little is known about their toxicity effects, especially to edible plants. In this greenhouse study, maize (Zea mays) seedlings were exposed for 4 weeks, through the soil route, to 10 and 100 mg/kg of 2H MoS₂ nanosheets. Plant growth, physiological parameters (chlorophyll, antioxidants, and MDA), along with Mo and nutrient element contents were determined in plant tissues. Results showed that at both doses, the nanosheets decreased plant growth. Inductively coupled plasma-mass spectrometry data also showed that both 2H MoS₂ concentrations allowed Mo absorption and translocation by maize plants. Additionally, at 100 mg/kg the nanosheets significantly reduced Ca, Mg, Mn, and Zn in leaves, and Na in roots. Gene sequencing data of 16S rRNA showed, that MoS₂ nanosheets changed the soil microbial community structure, compared with the untreated control. In addition, nitrogen-fixing microorganisms such as Burkholderiales, Rhizobiales and Xanthobacteraceae were enriched. Overall, the data suggest that, even at low dose (10 mg/kg), the 2H MoS₂ nanosheets perturbed both the nutrient uptake by maize plants and the soil microbial communities.

The life cycle study revealed distinct impact of foliar-applied nano-Cu on antioxidant traits of barley grain comparing with conventional agents

Despite that the applicability of Cu-based engineered nanoparticles (ENPs) as an antibacterial and antifungal agent for plant protection has been studied widely, little is known about their role in the improvement of crop yield and quality. Here, a full life study was performed to investigate the nutritional quality and bioactivity of barley grains under foliar application of nano-/microparticulate (nano-Cu, nano-CuO, micro-Cu) and ionic Cu compounds (CuSO₄, CuEDTA). Hordeum vulgaris L. plants were sprayed with Cu compounds at 500 mg/L during the end of tillering and the beginning of heading. Yield, mineral composition, protein and dietary content, antioxidant (phenolic, anthocyanin, flavonoid, tannin, flavanol) content and antioxidant capacity of barley grain were evaluated. Grain yield was unaffected by all treatments. Only nano-Cu and ionic compounds enhanced Cu accumulation in grain: 2-fold increase was observed compared to the control (2.6 µg/kg). Nano-Cu also increased the dietary fiber content by 19.9 %, while no impact of the other treatments was determined. The content of phenolic compounds, the main group of antioxidants, remained unchanged after Cu supply. In general, for all Cu treatment, antiradical and reducing abilities were decreased or were at the similar level in relation to the control. On the other hand, chelating power in grain extracts was 2-4 times higher under nano-Cu/nano-CuO/micro-Cu than in the untreated sample, while the ionic compounds had no impact on the chelating indicator. Our results demonstrated that more favorable effects were triggered by nano-Cu than CuSO₄ or CuEDTA on the tested indicators of barley grain, despite that both compounds resulted in similar superior Cu acquisition. It suggests that nano-Cu may be considered as an alternative agent to be used as economic and traditional fertilizers.

Effect of soil texture and zinc oxide nanoparticles on growth and accumulation of cadmium by wheat: a life cycle study

Cadmium (Cd) is getting worldwide attention due to its continuous accumulation in agricultural soils which is due to anthropogenic activities and finally Cd enters in food chain mainly through edible plants. Cadmium free food production on contaminated soils is great challenge which requires some innovative measures for crop production on such soils. The current study evaluated the efficiency of zinc oxide nanoparticles (ZnONPs) (0, 150 and 300 mg/kg) on the growth of wheat in texturally different soils including clay loam (CL), sandy clay loam (SCL), and sandy loam (SL) which were contaminated with were contaminated with 25 mg/kg of Cd before crop growth. Results depicted that doses of ZnONPs and soil textures significantly affected the biological yields, Zn and Cd uptake in wheat plants. The application of 300 mg/kg ZnONPs caused maximum increase in dry weights of shoot (66.6%), roots (58.5%), husk (137.8%) and grains (137.8%) in CL soil. The AB-DTPA extractable Zn was increased while Cd was decreased with doses of NPs depending upon soil textures. The maximum decrease in AB-DTPA extractable Cd was recorded in 300 mg/kg of ZnONPs treatment which was 58.7% in CL, 33.2% in SCL and 12.1% in SL soil as compared to respective controls. Minimum Cd concentrations in roots, shoots, husk and grain were found in 300 mg/kg ZnONPs amended CL soil which was 58%, 76.7%, 58%, and 82.6%, respectively. The minimum bioaccumulation factor (0.14), translocation index (2.46) and health risk index (0.05) was found in CL soil with the highest dose of NPs. The results concluded that use of ZnONPs significantly decreased Cd concentration while increased Zn concentrations in plants depending upon doses of NPs and soil textures.

Enhanced bioremediation of triclocarban-contaminated soil by Rhodococcus rhodochrous BX2 and Pseudomonas sp. LY-1 immobilized on biochar and microbial community response

Triclocarban (TCC), an emerging organic contaminant (EOC), has become a severe threat to soil microbial communities and ecological security. Here, the TCC-degrading strain Rhodococcus rhodochrous BX2 and DCA-degrading strain Pseudomonas sp. LY-1 (together referred to as TC1) were immobilized on biochar to remove TCC and its intermediates in TCC-contaminated soil. High-throughput sequencing was used to investigate the microbial community structure in TCC-contaminated soil. Analysis of co-occurrence networks was used to explore the mutual relationships among soil microbiome members. The results showed that the immobilized TC1 significantly increased the removal efficiency of TCC from 84.7 to 92.7% compared to CK (no TC1 cells on biochar) in 10 mg/L TCC liquid medium. The utilization of immobilized TC1 also significantly accelerated the removal of TCC from contaminated soil. Microbial community analysis revealed the crucial microorganisms and their functional enzymes participating in TCC degradation in soil. Moreover, the internal labor division patterns and connections of TCC-degrading microbes, with a focus on strains BX2 and LY-1, were unraveled by co-occurrence networks analysis. This work provides a promising strategy to facilitate the bioremediation of TCC in soil, which has potential application value for sustainable biobased economies.

Potential mobilization of cadmium and zinc in soils spiked with smithsonite and sphalerite under different water management regimes

Particulate cadmium (Cd) and zinc (Zn) are ubiquitous in agricultural soils of Pb-Zn mining regions. Water management serves as an important agronomic measure altering the bioavailability of Zn and Cd in soils, but how this affects particulate Cd and Zn and the underlying mechanisms remain largely unknown. Microcosm soil incubation combined with spectroscopic and microscopic characterization was conducted. During a two-year-long incubation period we observed that the concentrations of soil CaCl₂-extractable Zn and Cd increased 3-10 times in sphalerite-spiked soils and 1-2 times in smithsonite-spiked soils under periodic flooding conditions due to the long-term dissolution of sphalerite (SP) and smithsonite (SM). However, the increase in the concentration of CaCl₂-extractable metals (Zn: from 0.607 mg kg^-1 to 1.051 mg kg^-1 and Cd: from 0.047 mg kg^-1 to 0.119 mg kg^-1) was found only in SP-treatment under continuous flooding conditions, indicating the mobilization of metals. Ultrafiltration analysis shows that the nanoparticulate fraction of Zn and Cd in soil pore water increased 5 and 7 times in SP-treatments under continuous flooding conditions, suggesting the increment of metal pools in soil pore water. HRTEM-EDX-SAED further reveals that these nanoparticles were mainly crystalline ZnS and Zn-bearing sulfate nanoparticles in the SP-treatment and amorphous ZnCO₃ and ZnS nanoparticles in the SM-treatment. Therefore, the formation of the stable crystalline Zn-bearing nanoparticles in the SP-treatment may explain the elevation of the concentration of soil CaCl₂-extractable Zn and Cd under continuous flooding. The potential mobility of particulate metals should therefore be expected in scenarios of continuous flooding such as paddy soils and wetland systems.

Application of Isotopically Labeled Engineered Nanomaterials for Detection and Quantification in Soils via Single-Particle Inductively Coupled Plasma Time-of-Flight Mass Spectrometry

Finding and quantifying engineered nanomaterials (ENMs) in soil are challenging because of the abundance of natural nanomaterials (NNMs) with the same elemental composition, for example, TiO₂. Isotopically enriched ENMs may be distinguished from NNMs with the same elemental composition using single-particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOF-MS) to measure multiple isotopes simultaneously within each ENM and NNM in soil, but the minimum isotope enrichment needed for detection of ENMs in soil is not known. Here, we determined the isotope enrichment needed for ⁴⁷Ti-enriched TiO₂ ENMs to be detectable in soil and assessed the effects of weathering on those requirements for less soluble TiO₂ and more soluble CuO ENMs. The isotope-enriched ENMs were dosed into two different soils and were extracted and measured by spICP-TOF-MS after 1, 7, and 30 days. Isotope-enriched ENMs were recovered and detected for all three time points. The ⁴⁷Ti-enriched TiO₂ ENMs were detectable in Lufa 2.2 soil at a nominal dosed concentration of 10 mg-TiO₂ kg^-1 which is an environmentally relevant concentration in biosolid-amended soils. For distinguishing an ∼70 nm diameter TiO₂ ENM from TiO₂ NNMs in Lufa 2.2 soil, an ∼10 wt % ⁴⁷Ti isotope-enrichment was required, and this enrichment requirement increases as the particle size decreases. This study is the first to evaluate the tracking ability of isotope-enriched ENMs at an individual particle level in soil and provides guidance on the isotope enrichment requirements for quantification of ENMs made from Earth-abundant elements in soils.

Size-dependent biological effect of copper oxide nanoparticles exposure on cucumber (Cucumis sativus)

Copper oxide nanoparticles (CuO NPs) have received considerable attention for their toxic effects on crops and potential application in agriculture. In order to investigate the biological effects of CuO NPs on plants, we exposed cucumber (Cucumis sativus) to two sizes of CuO NPs (510 nm, μCuO and 43 nm, nCuO). Results indicated that with concentration increased, the available Cu content in soil increased significantly. The addition of CuO NPs increased Cu content and other nutrient element (e.g., K, P, Mn, and Zn) content in plants. However, diverse particle sizes had different effects. The nCuO treatment had larger translocation factor, higher nutrient element content in fruits, and lower oxidative damage than μCuO treatment. Moreover, nCuO of 100 mg/kg could stimulate cucumber growth, while μCuO had no obvious effects on growth. Conclusively, CuO NPs could be used as copper fertilizer to supply copper to cucumber. The nCuO had better effects on improving the bioavailability of Cu and nutritional value of fruits. These results can help develop strategies for safe disposal of CuO NPs as agricultural fertilizer.

Trophic transfer of Cu nanoparticles in a simulated aquatic food chain

The goal of the current study was to quantify the trophic transfer of copper nanoparticles (CuNPs) in a food chain consisting of the microalga Pseudokirchneriella subcapitata as the representative of primary producer, the grazer Daphnia magna, and the omnivorous mysid Limnomysis benedeni. To quantify the size and number concentration of CuNPs in the biota, tissue extraction with tetramethylammonium hydroxide (TMAH) was performed and quantification was done by single particle inductively coupled plasma mass spectrometry (sp-ICP-MS). The bioconcentration factor (BCF) of the test species for CuNPs varied between 10² - 10³ L/kg dry weight when expressing the internal concentration on a mass basis, which was lower than BCF values reported for Cu²⁺ (10³ - 10⁴ L/kg dry weight). The particle size of CuNPs determined by sp-ICP-MS ranged from 22 to 40 nm in the species. No significant changes in the particle size were measured throughout the food chain. Moreover, the measured number of CuNPs in each trophic level was in the order of 10¹³ particles/kg wet weight. The calculated trophic transfer factor (mass concentration basis) was > 1. This indicates biomagnification of particulate Cu from P. subcapitata to L. benedeni. It was also found that the uptake of particulate Cu (based on the particle number concentration) was mainly from the dietary route rather than from direct aqueous exposure. Furthermore, dietary exposure to CuNPs had a significant effect on the feeding rate of mysid during their transfer from daphnia to mysid and from alga through daphnia to mysid. This work emphasizes the importance of tracing the particulate fraction of metal-based engineered nanoparticles when studying their uptake and trophic transfer.

Effect of wetting-drying cycles on the Cu bioavailability in the paddy soil amended with CuO nanoparticles

The extensive application of metal-based nanoparticles can pose environmental risks, but how the alternation of wet and dry caused by natural precipitation and artificial irrigation affects the environmental fate of nanoparticles is still unclear. Here, we investigated the underlying mechanisms of wetting-drying cycles (WDCs) on the Cu bioavailability in paddy soil treated with CuO nanoparticles (100 and 500 mg/kg) during 140 days by comparing with drought and flooding conditions. The results show that soil moisture content greatly affected the soil pH and redox potential. The bioavailable Cu contents in the WDCs exposed to CuO nanoparticles were positively correlated to moisture content and WDCs number. The fit result of the pseudo-second-order equation indicates that WDCs greatly prevented the aging process of Cu in soil. Furthermore, WDCs transformed oxidizable Cu to water-soluble, acid extractable and reducible Cu. WDCs markedly promoted the degradation of dissolved organic matter and the transformation of acid-soluble sulfate to water-soluble inorganic sulfate, meanwhile, significantly enhanced the contents of crystalline iron oxides by 22-57% and 82-326% with respect to drought and flooding, but reduced the level of ferrous iron by 37-67% compared to the flooding. µ-XRF analysis shows that the fate of CuO nanoparticles might be mainly determined by Fe under WDCs condition but by S in flooded soil. This study can provide a comprehensive assessment on the impact of natural precipitation and artificial irrigation on the environmental risks of MNPs.

Mineral Neutralizers as a Tool for Improving the Properties of Soil Contaminated with Copper

In phytoremediation processes implemented in highly contaminated areas, there is a high risk of contaminant toxicity during the germination of freshly sown plants. In such conditions, it is recommended to support phytoremediation by using neutralizing additives. The present study aimed at assessing the effect of the addition of mineral neutralizers (MNs), i.e., limestone, clay, and zeolite, to soil contaminated with copper (0, 200, 400, 600 mg kg−1). Basic soil indicators were analyzed, such as pH, hydrolytic acidity (HAC), total exchangeable bases (TEB), cation exchange capacity (CEC), base saturation (BS), electrolytical conductivity (EC), total organic carbon (TOC), total nitrogen (Ntot), carbon to nitrogen ratio (C:N),, and interactions of soil micronutrients, such as Cu, Zn, Cd, Cr, Ni, Pb, Mn, and Fe with MNs. Copper contamination significantly decreased the soil pH and increased its HAC. A decrease in the share of TEB was found, which resulted in a decrease in the CEC and in BS of the soil. Among the additives, limestone had the most beneficial effect on reducing soil acidity, contributing to a significant increase in TEB, CEC, and BS. The least favorable effect was shown for clay, which generally caused the deterioration of soil properties. The MNs significantly increased the content of Zn, Cr, and Fe and lowered the content of Ni in the soil compared to the control. The demonstrated interactions indicate the diversified activity of MNs at different levels of soil contamination with copper.

Slow release of copper from jellyfish-based hydrogels for soil enrichment

Nanotechnology has shown great potential to increase global food production and enhance food security. However, large-scale application of nano-enabled plant agriculture necessitates careful adjustments in design to overcome barriers associated with targeted nanomaterial delivery and their safety concerns. The research herein proposes the delivery of copper (Cu) from immobilized and non-immobilized copper oxide nanoparticles (Cu₂O), an active nanomaterial with antifungal and micro-nutrient properties. A benign and biodegradable jellyfish-based hydrogel was used as a platform during Cu₂O delivery to soils. The delivery kinetics and Cu dissolution from the nanocomposite were compared to those obtained with crosslinked ionic Cu in hydrogel, which was found to be a less controlled composite. In addition, changing environmental conditions from DI to soil extracts resulted in a decrease in the Cu dissolution rate (from 0.025 to 0.015 h^-1) and an increase in the overall normalized Cu release (0.27 to 0.76 mg g^-1). Use of hydrogels from natural sources allowed biodegradability over several months, adding nutrients (in the form of elements such as sulfur, nitrogen, and carbon) back to the environment, which ultimately minimizes nanomaterial required for a given desired nanomaterial yield and enhances the overall performance. Altogether, this work demonstrates the potential of Cu₂O embedded hydrogels as a benign composite for Cu slow-release and therefore bolsters the field of nano-enabled plant agriculture and supports its safe deployment at large scales.

Dissolution kinetics and solubility of copper oxide nanoparticles as affected by soil properties and aging time

Nano copper oxide (CuO NP) was added to eight soils to study the effect of aging time of copper on the concentration of diethylenetriaminepentaacetic acid (DTPA)-extracted copper (DTPA-Cu), with bulk copper oxide (CuO BP) and copper nitrate [Cu(NO₃)₂] used for comparison. Moreover, the effect of soil properties on the dissolution of CuO NP was studied. A dissolution model was used to quantitatively describe the dissolution kinetics of CuO NPs in different soils. The results showed that the concentration of DTPA-Cu decreased with increasing aging time in soils spiked with Cu(NO₃)₂, while the concentration increased to varying degrees in soils spiked with CuO NPs or CuO BPs. In acidic soils, the equilibrium concentrations of DTPA-Cu were 93.3-98.7 mg·kg^-1 for CuO NP treatments, 65.5-94.3 mg·kg^-1 for CuO BP treatments, and 81.4-90.0 mg·kg^-1 for Cu(NO₃)₂ treatments, which were greater than those in alkaline soils (43.4-56.9 mg·kg^-1, 6.26-8.61 mg·kg^-1, and 73.9-80.0 mg·kg^-1, respectively). In acidic soils, DTPA-Cu equilibrium concentration ranked the different forms of copper treatments as CuO NPs > Cu(NO₃)₂ > CuO BPs, while in alkaline soils, the order was Cu(NO₃)₂ > CuO NPs > CuO BPs. The dissolution rate constants and solubility of CuO NPs were 0.33-6.42 and 37.1-100.1 mg·kg^-1, respectively. Pearson correlation analysis indicated that the dissolution parameters of CuO NPs were negatively correlated with soil pH and positively correlated with the contents of organic matter, clay, iron oxides, and aluminum oxides. Further, the dissolution rate constant and solubility of CuO NPs could be well predicted by soil pH and the content of free or amorphous aluminum. Our study identified the main factors controlling the dissolution of CuO NPs in farmland soils and highlighted the higher availability of CuO NPs in acidic soils.

Aggregation, solubility and cadmium-adsorption capacity of CuO nanoparticles in aquatic environments: Effects of pH, natural organic matter and component addition sequence

Nanoparticles (NPs), heavy metals and natural organic matter may co-exist in the water bodies. Currently, knowledge on their interaction effects on the behaviors and fates of NPs and heavy metal ions is rather limited, which is critical to comprehensively understand their environmental risk. In this study, the aggregation, solubility and Cd-adsorption of CuO NPs co-existing with humic acid (HA) and Cd²⁺ upon different solution pH and contact sequences were determined. In the ternary systems of CuO NPs, HA and Cd²⁺, pH was more important than the contact sequence of the components in affecting the NP aggregation, while the contact sequence was a predominant factor in determining the NP solubility. Pre-equilibration of CuO NPs and HA before addition of Cd²⁺ resulted in the highest solubility and lowest aggregation of the NPs, relative to other sequences of addition of the components. The adsorption capacity of CuO NPs for Cd-ions increased with an increasing pH value from 5 to 9. HA significantly enhanced the Cd-adsorption capacity of CuO NPs at pH 7 and 9, while at pH 5 a non-significant effect was observed. The results are helpful to better estimate the behaviors and fates of CuO NPs and Cd²⁺ when they coexisting in natural waters.

Microbe-oriented nanoparticles as phytomedicines for plant health management: An emerging paradigm to achieve global food security

Biotic and abiotic environmental stresses affect the production and quality of agricultural products worldwide. The extensive use of traditional preventive measures comprising toxic chemicals has become more problematic due to severe ecotoxicological challenges. To address this issue, engineered nanoparticles (NPs) with their distinct physical and chemical properties has gained scientific attention and can help plants to confront environmental challenges. Despite their ameliorative and beneficial effects, toxicological concerns have been raised about NPs. The recent development of biogenic NPs (bio-NPs) is getting attention in agriculture due to their diverse biocompatibility, better functional efficacy, and eco-friendly nature compared to the recalcitrant NPs, providing a promising strategy for increased crop protection against biotic and abiotic environmental stresses, with the ultimate goal of ensuring global food security. This review summarizes the recent advances in the engineering of bio-NPs with particular emphasis on the functions of bio-NPs in protecting plants from biotic and abiotic environmental stresses, delivery and entry routes of NPs to plant systems, nanotoxicity, and plant physiological/biochemical responses to nanotoxicity. Future perspectives of bio-NP-enabled strategies, remaining pitfalls, and possible solutions to combat environmental challenges via advanced nanotechnology to achieve global food security and a sustainable agricultural system are also discussed.

Cross-examination of engineered nanomaterials in crop production: Application and related implications

The review presents the current knowledge on the development and implementation of nanotechnology in crop production, giving particular attention to potential opportunities and challenges of the use of nano-sensors, nano-pesticides, and nano-fertilizers. Due to the size-dependent properties, e.g. high reactivity, targeted and controlled delivery of active ingredients, engineered nanomaterials (ENMs) are expected to be more efficient agrochemicals than conventional agents. Growing production and usage of ENMs result in the spread of ENMs in the environment. Because plants constitute an important component of the agri-ecosystem, they are subjected to the ENMs activity. A number of studies have confirmed the uptake and translocation of ENMs by plants as well as their positive/negative effects on plants. Here, these endpoints are briefly summarized to show the diversity of plant responses to ENMs. The review includes a detailed molecular analysis of ENMs-plant interactions. The transcriptomics, proteomics and metabolomics tools have been very recently employed to explore ENMs-induced effects in planta. The omics approach allows a comprehensive understanding of the specific machinery of ENMs occurring at the molecular level. The summary of data will be valuable in defining future studies on the ENMs-plant system, which is crucial for developing a suitable strategy for the ENMs usage.

The dichotomy of nanotechnology as the cutting edge of agriculture: Nano-farming as an asset versus nanotoxicity

The unprecedented setbacks and environmental complications, faced by global agro-farming industry, have led to the advent of nanotechnology in agriculture, which has been recognized as a novel and innovative approach in development of sustainable farming practices. The agricultural regimen is the "head honcho" of the world, however presently certain approaches have been imposing grave danger to the environment and human civilization. The nano-farming paradigm has successfully elevated the growth and development of plants, parallel to the production, quality, germination/transpiration index, photosynthetic machinery, genetic progression, and so on. This has optimized the traditional farming into precision farming, utilising nano-based sensors and nanobionics, smart delivery tools, nanotech facets in plant disease management, nanofertilizers, enhancement of plant adaptive potential to external stress, role in bioenergy conservation and so on. These applications portray nanorevolution as "the big cheese" of global agriculture, mitigating the bottlenecks of conventional practices. Besides the applications of nanotechnology, the review identifies the limitations, like possible harmful impact on environment, mankind and plants, as the "Achilles heel" in agro-industry, aiming to establish its defined role in agriculture, while simultaneously considering the risks, in order to resolve them, thus abiding by "technology-yes, but safety-must". The authors aim to provide a significant opportunity to the nanotech researchers, Botanists and environmentalists, to promote judicial use of nanoparticles and establish a secure and safe environment.

Pristine and sulfidized ZnO nanoparticles alter microbial community structure and nitrogen cycling in freshwater lakes

Zinc oxide nanoparticles (ZnO NPs) and its sulfidized form (ZnS NPs) are increasingly entering into freshwater systems through multiple pathways. However, their impacts on the composition and function of sedimentary microbial communities are still largely unknown. Here, two kinds of lake-derived microcosms were constructed and incubated with ZnO NPs, or ZnS NPs to investigate the short-term (7 days) and long-term (50 days) impacts on sedimentary microbial communities and nitrogen cycling. After 7 days, both ZnO NPs and ZnS NPs dosed microbial communities experienced distinct alterations as compared to the undosed controls. By day 50, the structural shifts of microbial communities caused by ZnO NPs were significantly enlarged, while the microbial shifts induced by ZnS NPs were largely resolved. Additionally, ZnO NPs and ZnS NPs could significantly alter nitrogen species and nitrogen cycling genes in sediments, revealing their non-negligible impacts on nitrogen cycling processes. Furthermore, our data clearly indicated that the impacts of ZnO NPs and ZnS NPs on nitrogen cycling differed distinctly in different lake-derived microcosms, and the impacts were significantly correlated with microbial community structure. Overall, this research suggests that the entrance of pristine or sulfidized ZnO NPs into freshwater systems may significantly impact the sedimentary microbial community structure and nitrogen cycling.

Uptake, translocation, and transformation of silver nanoparticles in plants

This article reviews the plant uptake of silver nanoparticles (AgNPs) that occurred in soil systems and the in planta fate of Ag.

Effect of clay colloid - CuO nanoparticles interaction on retention of nanoparticles in different types of soils: role of clay fraction and environmental parameters

The extensive application of metal oxide nanoparticles (NPs) in various sectors has raised concern about their subsequent release and potentially harmful impacts on the soil system. The present study has addressed the interaction of CuO NPs with bentonite clay colloids (CC) under varying environmental parameters as a model to represent the soil pore water scenario. Based on CuO - CC interaction in model and natural soil solution extracts (SSE), the role of clay fraction and their stability on CuO retention in various types of soils have been evaluated. Results suggested that increasing ionic strength (IS) in the system caused aggregation of CuO NPs, and in the presence of CC, critical coagulation concentration decreased drastically from 27.8 and 17.3 mM to 10.7 and 0.33 mM for NaCl and CaCl₂ respectively, due to heteroaggregation in the system. Interestingly, in the SSE, the dominating role of ionic valency, dissolved organic carbon (DOC), and CC was observed in colloidal stabilization over IS. No significant impact of temperature was observed on the stability of CuO NPs both in model and SSE. Further, stability studies in the SSE were correlated with NPs retention behavior in soils. Observations suggest that retention of CuO NPs in soils is a function of binding of the colloidal fraction to the soil, which in turn depends on the colloidal stability. The highest retention was observed in black and laterite soils, whereas lower binding of clay fraction in red soil caused the least retention. A decrease in K_d values after a certain application concentration provided maximum sustainable application concentration of CuO NPs, which may vary with soil properties. Results suggest that the binding of clay and organic matter with a sandy matrix of soil plays a prime role in deciding the overall fate of CuO NPs in the soils.

The co-occurrence of Zn-and Cu-based engineered nanoparticles in soils: The metal extractability vs. toxicity to Folsomia candida

The presence of engineered nanoparticles (ENPs) in soil gradually increases, among others due to the nano-agrochemicals application. So far, the co-existence of different ENPs in soil is poorly examined. Here, the metal extractability and toxicity of soils spiked (300 mg kg^-1) singly and jointly with Zn- and Cu-based ENPs or metal salts were tested. The samples were aged for 1 and 90 days. The predicting available metal component of ENPs concentrations were determined by different methods including soil pore water collection and batch extractions with H₂O, CaCl₂ or DTPA. Survival and reproduction of Folsomia candida were also evaluated. The combined effect of ENPs on the extractability of metals was mainly found with DTPA characterized by the highest leaching capacity among the used extractants. In fresh soil, the mixtures of ENPs differentiated only DTPA-extractable Cu level, while aging resulted in changes in both Zn and Cu concentrations leached by CaCl₂ or DTPA. However, the character of the combined effect was an ENPs- and soil type-dependent, whereas the mixtures of metal salts mostly provided higher Zn and Cu recovery than the individual compounds. The pattern of co-toxicity of metal-oxide ENPs was also time-dependent: the antagonistic and synergistic effect was observed in the samples after 1 and 90 days, respectively. However, the toxicity was weakly related with extractable concentrations in both single and joint treatment of metal compounds. The distinct joint effect patterns of ENPs imply the need for more in-depth investigation of mechanisms of activity of ENPs mixtures in soil.

Current trends and future prospective in nanoremediation of heavy metals contaminated soils: A way forward towards sustainable agriculture

Heavy metals (HMs) contamination in agricultural soils is a major concern for global food safety and human health. Although, various in-situ and ex-situ remediation methods have been used for the treatment of HMs contaminated soils, however, they also have many drawbacks viz., capital investment, toxicity, and environmental health hazards. Consequently, there is an urgent need to develop a novel method to ameliorate the toxicity of HMs in agricultural soils. In recent years, nanoparticles (NPs) have gained significant attention due to their potential applications in the environment and agriculture fields. Nanoremediation employs NPs that effectively reduce the contents of toxic HMs in the soil-plant system. Several studies have reported that the application of NPs in HMs-polluted soils, which reduced plant-available HMs concentration soils. However, the long-term efficiency of NPs immobilization is still unclear. Here, we provide details about the toxicity of HMs to environmental systems and potential applications NPs to alleviate the accumulation of HMs in agricultural soils. Finally, we present the mechanistic route of HMs-toxicity alleviation in plants by NPs application as well as their long-term efficiency and future prospects.

Biomass ash formulations as sustainable improvers for mining soil health recovery: Linking soil properties and ecotoxicity

There is a growing need to recover degraded soils to restore their essential ecosystem services and limit damages of anthropic activities onto these systems. Safe and sustainable solutions for long-term recovery must be designed, ideally by recycling existing resources. Using ash from combustion of residual forest biomass at the pulp and paper industry is an interesting and sustainable strategy to recover mining soils. However, formulations must be found to limit the potential toxicity associated with soluble salts and chloride that ash contains. Here, we assessed the effectiveness of three field ash-based amendments for the recovery of three highly acidic soils from Portuguese abandoned mines. Three amendments were tested: an un-stabilized mixture of ash and biological sludge, granulated ash, and granulated ash mixed with composted sludge. One year after application in open field plots (in the scope of LIFE No_Waste project), soil health restoration was evaluated through (i) soil physico-chemical characterization and (ii) soil habitat functions though standardized ecotoxicological tests. This study highlights that stabilized materials provided nutrients, organic matter and alkalinity that corrected soil pH and decreased metal bioavailability, while controlling the release of soluble salts and chloride from ash. This soil improvement correlated with improved soil model organisms' reproduction and survival. For similar amendment, the native soil properties studied (as soil native electrical conductivity) affected the level of organism response. This work provides evidence that ash stabilization, formulation and supplementation with organic matter could be sustainable strategies to restore highly degraded mining soils and to recover their ecological functions. It further highlights the importance of analyzing combined effects on soil physico-chemical properties and ecological function recovery to assess restoration strategy efficiencies in complex multi-stressor environments.

Impact of a super typhoon on heavy metal distribution, migration, availability in agricultural soils

Heavy metal contamination in agricultural soils is a worldwide concerned environmental issue. However, a short-term extreme hydrodynamic event (e.g., a super typhoon) may significantly affect the distribution, migration, and availability of heavy metals in agriculture soils on a large scale. The limited understanding of such an impact prevents effective environment survey, risk assessment, and remediation strategy for heavy metal contaminated soils. Here, we show a massive migration of heavy metals during a super typhoon (Lekima) based on the field investigation, simulated experiments, and isotopic fingerprinting. The contaminations of heavy metals (Cd, Zn, Cu, Ni, Cr and As) of agricultural soils at 209 sampling sites over 3.59 × 10⁵ km², were significantly relieved by 10.3-42.0 % after the typhoon, because of the primary contribution of runoff erosion over interflow according to the simulated soil erosions. However, the available fractions (as % of the total amount of each metal) were metal-dependent, with Cd, Zn, Cu, and Ni increased (5.3-26.4 %), and Cr and As decreased (0.9-3.5 %). In contrary, the Pb contamination was slightly aggravated by 8.7 % after the typhoon, and the Pb isotopic signatures indicate its input and migration via wet precipitation and surface runoff. The soil properties (e.g., pH and organic matter) showed limited impact on the migration of heavy metals during this typhoon. These results suggest that a natural short-term extreme hydrodynamic event can drive the massive migration of heavy metals in agricultural soils and their trade-off with other environmental medias, providing valuable information for multi-medias environmental risk assessment and cooperative remediation that can be significantly disturbed by such an event.

Differential bioaccumulations and ecotoxicological impacts of metal-oxide nanoparticles, bulk materials, and metal-ions in cucumbers grown in sandy clay loam soil

Expanding applications of metal-oxide nanoparticles (NPs) and increased environmental deposition of NPs followed by their interactions with edible crops threaten yields. This study demonstrates the effects of aging (45 days in soil) of four NPs (ZnO, CuO, Al₂O₃, TiO₂; 3.9-34 nm) and their corresponding metal oxide bulk particles (BPs; 144-586 nm) on cucumbers (Cucumis sativus L.) cultivated in sandy-clay-loam field soil and compares these with the phytotoxic effects of readily soluble metal salts (Zn²⁺, Cu²⁺, and Al³⁺). Data revealed the cell-to-cell translocations of NPs, their attachments to outer and inner cell surfaces, nuclear membranes, and vacuoles, and their upward movements to aerial parts. Metal bioaccumulations in cucumbers were found in the order: (i) ZnO-NPs > ZnO-BPs > Zn²⁺, (ii) CuO-NPs > CuO-BPs > Cu²⁺, (iii) Al³⁺> Al₂O₃-NPs > Al₂O₃-BPs and (iv) TiO₂-NPs > TiO₂-BPs. Aging of NPs in soil for 45 days significantly enhanced metal uptake (P ≤ 0.05), for instance aged ZnO-NPs at 1 g kg^-1 increased the uptake by 20.7 % over non-aged ZnO-NPs. Metal uptakes inhibited root (RDW) and shoot (SDW) dry weight accumulations. For Cu species, maximum negative impact (%) was exhibited by Cu²⁺ (RDW:SDW = 94:65) followed by CuO-NPs (RDW:SDW = 78:34) and CuO-BPs (RDW:SDW = 27:22). Aging of NPs/BPs at 1-4 g kg^-1 further enhanced the toxic impact of tested materials on biomass accumulations and chlorophyll formation. NPs also induced membrane damage of root tissues and enhanced levels of antioxidant enzymes. The results of this study suggest that care is required when aged metal-oxide NPs of both essential (Zn and Cu) and non-essential (Al and Ti) metals interact with cucumber plants, especially, when they are used for agricultural purposes.

Effect of Soil Properties and Aging Time on Oral and Inhalation Bioaccessibility of Copper Oxide Nanoparticles in Soils

In this study, soils spiked with copper oxide nanoparticles (CuO NPs) or Cu(NO₃)₂ and aged as long as 90 days were utilized to investigate effect of soil properties and aging on oral and inhalation bioaccessibility of CuO NPs. Results showed that oral bioaccessibility of CuO NPs in gastric phase (GP) ranged from 70% to 84%, it significantly decreased to 50%-70% in intestinal phase (IP). The inhalation bioaccessibility of CuO NPs in artificial lysosomal fluid (ALF) ranged from 66% to 85%, and much higher than that in Gamble's solution (GS, 3.3%-23%). By comparing CuO NPs to Cu(NO₃)₂ bioaccessibility, insignificant difference was found. The aging time (D15 and D90) had limited effect on their oral and inhalation bioaccessibility. CEC and free Al were positively and clay content was negatively correlated with CuO NPs inhalation bioaccessibility, while Cu(NO₃)₂ inhalation bioaccessibility decreased with increasing soil clay content and pH. Our findings provide an essential basis to evaluate the human health risks of CuO NPs.

Measuring ZnO nanoparticles available concentrations in contaminated soils using the diffusive gradient in thin-films (DGT) technique

A major gap in understanding nanomaterials behaviour in the environment is a lack of reliable tools to measure their available concentrations. In this research we use diffusive gradients in thin films (DGT) for measuring concentrations of zinc oxide nanoparticles (ZNO NPs) in soils. Available nanoparticle concentrations were assessed by difference, using paired DGT devices with and without 1000 MWCO dialysis membranes to exclude NPs. We used ZnO because its toxic effects are accelerated through dissolution to Zn²⁺. Our test soils had different pH and organic matter (OM) contents, which both affect the dissolution rate of ZnO NPs. Woburn (pH ≈ 6.9, OM ≈ 1.8%) and Lufa (pH ≈ 5.9, OM ≈ 4.2%) soils were spiked to a single concentration of 500 mg of ZnO NPs per 1 kg of soil and the available concentrations of ZnO NPs and dissolved zinc were evaluated in 3, 7, 14, 21, 28, 60, 90, 120, 150 and 180 day intervals using DGT. The results showed that the dissolution of ZnO NPs, as well as the available concentrations of both dissolved and nanoparticulate Zn, was much higher in Lufa soil than in Woburn. This work demonstrates that DGT can be used as a simple yet reliable technique for determining concentrations of ZnO NPs in soils and probing its dissolution kinetics.

Critical Review: Role of Inorganic Nanoparticle Properties on Their Foliar Uptake and in Planta Translocation

There is increasing pressure on global agricultural systems due to higher food demand, climate change, and environmental concerns. The design of nanostructures is proposed as one of the economically viable technological solutions that can make agrochemical use (fertilizers and pesticides) more efficient through reduced runoff, increased foliar uptake and bioavailability, and decreased environmental impacts. However, gaps in knowledge about the transport of nanoparticles across the leaf surface and their behavior in planta limit the rational design of nanoparticles for foliar delivery with controlled fate and limited risk. Here, the current literature on nano-objects deposited on leaves is reviewed. The different possible foliar routes of uptake (stomata, cuticle, trichomes, hydathodes, necrotic spots) are discussed, along with the paths of translocation, via the phloem, from the leaf to the end sinks (mature and developing tissues, roots, rhizosphere). This review details the interplays between morphological constraints, environmental stimuli, and physical-chemical properties of nanoparticles influencing their fate, transformation, and transport after foliar deposition. A metadata analysis from the existing literature highlighted that plant used for testing nanoparticle fate are most often dicotyledon plants (75%), while monocotyledons (as cereals) are less considered. Correlations on parameters calculated from the literature indicated that nanoparticle dose, size, zeta potential, and affinity to organic phases correlated with leaf-to-sink translocation, demonstrating that targeting nanoparticles to specific plant compartments by design should be achievable. Correlations also showed that time and plant growth seemed to be drivers for in planta mobility, parameters that are largely overlooked in the literature. This review thus highlights the material design opportunities and the knowledge gaps for targeted, stimuli driven deliveries of safe nanomaterials for agriculture.

Dissolution and Aggregation of Metal Oxide Nanoparticles in Root Exudates and Soil Leachate: Implications for Nanoagrochemical Application

Knowledge of dissolution, aggregation, and stability of nanoagrochemicals in root exudates (RE) and soil leachate will contribute to improving delivery mechanisms, transport in plants, and bioavailability. We characterized aggregation, stability, and dissolution of four nanoparticles (NPs) in soybean RE and soil leachate: nano-CeO₂, nano-Mn₃O₄, nano-Cu(OH)₂, and nano-MoO₃. Aggregation differed considerably in different media. In RE, nano-Cu(OH)₂, and nano-MoO₃ increased their aggregate size for 5 days; their mean sizes increased from 518 ± 43 nm to 938 ± 32 nm, and from 372 ± 14 nm to 690 ± 65 nm, respectively. Conversely, nano-CeO₂ and nano-Mn₃O₄ disaggregated in RE with time, decreasing from 289 ± 5 nm to 129 ± 10 nm, and from 761 ± 58 nm to 143 ± 18 nm, respectively. Organic acids in RE and soil leachate can be adsorbed onto particle surfaces, influencing aggregation. Charge of the four NPs was negative in contact with RE and soil leachate, due to organic matter present in RE and soil leachate. Dissolution in RE after 6 days was 38%, 1.2%, 0.5%, and <0.1% of the elemental content of MoO₃, Cu(OH)₂, Mn₃O₄, and CeO₂ NPs. Thus, the bioavailability and efficiency of delivery of the NPs or their active ingredients will be substantially modified soon after they are in contact with RE or soil leachate.

Copper-based nanoparticles in the soil-plant environment: Assessing their applications, interactions, fate and toxicity

Copper-based nanoparticles (Cu-based NPs) have been gaining wide attention in agricultural applications due to their diverse characteristics and multipurpose properties. This includes their use in agrochemicals for efficient delivery and controlled release of pesticides and fertilizers. However, their excessive usage over a long duration of time could pose potential risks to the soil system. Further, they are known for their well-established anti-microbial effects which could be detrimental to soil health, particularly to the activities of soil microbes, which play a significant role in the functioning of terrestrial and agroecosystems. Thus, there is a great need to clearly understand these uniquely nanospecific properties of Cu-based NPs along with mode-of-action, effect on soil processes, soil organisms, and plants. This paper examines the current literature on Cu-based NPs to provide a systematic understanding of their potential impacts on the soil-plant environment. It explores their rising application and usage in agriculture along with their possible interaction with various soil components and the potential factors influencing it. It further investigates their uptake, translocation, and distribution in plants in various exposure media. It summarises that the dissolution, biotransformation, and bioavailability of Cu-based NPs in the soil are governed by several factors, like soil type, soil pH, and organic matter content. Further, environmental factors, time duration, and presence of other pollutants could also influence their biotransformation and soil toxicity. Finally, this review seeks to provide future perspectives that need attention for investigation purposes.

Combined effect of nano-CuO and nano-ZnO in plant-related system: From bioavailability in soil to transcriptional regulation of metal homeostasis in barley

The co-existence of engineered nanoparticles (ENPs) in the environment is an emerging issue remaining poorly investigated. The present study aimed at analyzing the fate of binary mixtures of CuO and ZnO ENPs in a soil-plant system. The ENPs were singly or jointly dosed into soil at 300 mg kg^-1 and aged for 7 and 30 days. To evaluate nano-specific effects, individual and combined treatments of metal salts were also applied. Interactions between ENPs and soil-grown barley Hordeum vulgare were determined in terms of biomass, plant mineral composition as well as expression of genes regulating metal homeostasis (ZIP1,3,6,8,10,14, RAN1, PAA1,2, MTP1, COPT5) and detoxification (MT1-3). The bioavailability of Zn and Cu in bulk soil and in the rooting zone was determined using the 0.01 mol L^-1 CaCl₂ extraction. After combined treatment of ENPs, the extractable concentrations of Cu and Zn were lower than upon individual exposure in bulk soil. The opposite tendency was noted for metal salts. Genes related to metal uptake (ZIP) and cellular compartment (PAA2, RAN1) were mostly up-regulated by single rather than combined application of ENPs. The single and joint exposure to metals salts induced the down-regulation of these genes.

Zinc oxide nanoparticles: potential effects on soil properties, crop production, food processing, and food quality

The use of zinc oxide nanoparticles (ZnO NPs) is expected to increase soil fertility, crop productivity, and food quality. However, the potential effects of ZnO NP utilization should be deeply understood. This review highlights the behavior of ZnO NPs in soil and their interactions with the soil components. The review discusses the potential effects of ZnO NPs on plants and their mechanisms of action on plants and how these mechanisms are related to their physicochemical properties. The impact of current applications of ZnO NPs in the food industry is also discussed. Based on the literature reviewed, soil properties play a vital role in dispersing, aggregation, stability, bioavailability, and transport of ZnO NPs and their release into the soil. The transfer of ZnO NPs into the soil can affect the soil components, and subsequently, the structure of plants. The toxic effects of ZnO NPs on plants and microbes are caused by various mechanisms, mainly through the generation of reactive oxygen species, lysosomal destabilization, DNA damage, and the reduction of oxidative stress through direct penetration/liberation of Zn2+ ions in plant/microbe cells. The integration of ZnO NPs in food processing improves the properties of the relative ZnO NP-based nano-sensing, active packing, and food/feed bioactive ingredients delivery systems, leading to better food quality and safety. The unregulated/unsafe discharge concentrations of ZnO NPs into the soil, edible plant tissues, and processed foods raise environmental/safety concerns and adverse effects. Therefore, the safety issues related to ZnO NP applications in the soil, plants, and food are also discussed.

Transformation and implication of nanoparticulate zero valent iron in soils

Knowledge of nanoparticulate zero-valent iron (nZVI) transformation in soils and its relationship with the potential impacts on soil properties are crucial to evaluate the environmental implication and application of nZVI. This study investigated nZVI transformation and the effects on soil properties in eight soils with various ageing time and soil moisture content (SMC). Spherical nZVI was gradually oxidized, collapsed, and adhered to clay minerals, and crystalline maghemite and magnetite were the primary oxidation products. Compared with the flooded condition, nZVI oxidation was accelerated under 70% SMC but was limited under 30% SMC. Acidic soil with lower content of dissolved aromatic carbon was advantage to nZVI oxidation under the flooded condition, while carboxymethylcellulose coating and iron oxides on nZVI surface limited nZVI oxidation. The aged nZVI existed mainly in the form of association with soil mineral or organic matter rather than in ion-exchangeable or carbonate form. nZVI treatment promoted soil aromatic carbon sequestration and decreased soil redox potential, and the impacts of nZVI on soil pH, electrical conductivity, ζ-potential, dissolved organic carbon, and catalase and urease activities were dependent on soil type and SMC. The findings are of significance for the evaluation of the environmental risk and proper application of nZVI.

Dissolution of copper oxide nanoparticles is controlled by soil solution pH, dissolved organic matter, and particle specific surface area

Dissolution is the primary process affecting the bioavailability and toxicity of nanoscale copper oxide (nano-CuO) to plants and soil organisms. In this study, particle morphology, organic acid, and soil properties were considered to understand the dissolution characteristics of nano-CuO in soil solutions. The results showed that the copper ions (Cu²⁺) released from spherical nano-CuO (CuO NPs), tubular nano-CuO (CuO NTs), and spherical microsized CuO (CuO MPs) in the ten soil solutions were 26.6-4194.0 μg/L, 4.90-217.1 μg/L, and 10.8-326.0 μg/L, respectively. The concentration of Cu²⁺ was negatively correlated with the pH of the soil solution and positively correlated with the contents of dissolved organic carbon (DOC), aluminum, and manganese. Multivariate stepwise regression analysis indicated that the dissolution of CuO NPs could be well predicted by pH and DOC contents of the soil solutions. In the GD soil solution (acidic), 4- and 8-fold of the DOC content amendments significantly promoted the dissolution of the three sizes of CuOs, resulting in an increase of Cu²⁺ 4.55-11.3 and 5.67-16.2 times, respectively. In the CQ soil solution (neutral), 8-fold DOC amendments increase the release of Cu²⁺ 2.13-16.6 times. While in the SD soil solution (alkaline), promoting effect on the dissolution was only observed for nano-CuOs, with Cu²⁺ elevated by factors of 1.56-4.64 and 1.38-4.48. The amendments of Al³⁺ and Mn²⁺ in soil solution increased the amounts of Cu²⁺ 1.13-4.80 and 1.02-1.46 times in the GD soil solution. In comparison, no significant promoting effects were observed in CQ and SD soil solutions due to their stronger buffering capacities. These findings offer insight into the dissolution behavior of nano-CuOs in soils and be helpful to evaluate their environmental risks.

Prediction of Plant Uptake and Translocation of Engineered Metallic Nanoparticles by Machine Learning

Machine learning was applied to predict the plant uptake and transport of engineered nanoparticles (ENPs). A back propagation neural network (BPNN) was used to predict the root concentration factor (RCF) and translocation factor (TF) of ENPs from their essential physicochemical properties (e.g., composition and size) and key external factors (e.g., exposure time and plant species). The relative importance of input variables was determined by sensitivity analysis, and gene-expression programming (GEP) was used to generate predictive equations. The BPNN model satisfactorily predicted the RCF and TF in both hydroponic and soil systems, with an R² higher than 0.8 for all simulations. Inclusion of the initial ENP concentration as an input variable further improved the accuracy of the BPNN for soil systems. Sensitivity analysis indicated that the composition of ENPs (e.g., metals vs metal oxides) is a major factor affecting RCF and TF values in a hydroponic system. However, the soil organic matter and clay contents are more dominant in a soil system. The GEP model (R² = 0.8088 and 0.8959 for RCF and TF values) generated more accurate predictive equations than the conventional regression model (R² = 0.5549 and 0.6664 for RCF and TF values) in a hydroponic system, which could guide the sustainable design of ENPs for agricultural applications.