Volatile chemical product emissions enhance ozone and modulate urban chemistry

Characterization of VOCs emissions and associated health risks inherent to the packaging and printing industries in Shandong Province, China

Comprehensive volatile organic compounds (VOCs) emission control is imperative to decreasing occupational health risks and environmental impact of the packaging and printing industries. In this work, we investigated the VOCs emission characteristics and concentrations of individual contaminants generated by the packaging and printing industries, with regard to various categories, processes, and geographic regions. VOCs emissions, ozone formation potential (OFP), and associated health risks were assessed at 10 representative packaging and printing firms across several cities in Shandong Province, China. Plastic packaging enterprises had the greatest levels of unorganized VOCs emissions, consisting predominantly of oxygenated volatile organic compounds (OVOCs), followed by alkanes and halocarbons. From metal and paper packaging enterprises, OVOCs, alkanes, and aromatics were significant components of unorganized VOCs emissions. Aromatics, halocarbons, and OVOCs contributed significantly to OFP in workshops. The potential carcinogenic risk associated with VOCs in the packaging and printing industries was not significant. However, according to the findings in this study, the workshop environment may provide a comparatively elevated non-carcinogenic risk attributable to ethyl acetate, isopropanol, acrolein, 1,1,2-Trichloroethane, 1,2-Dichloropropane, and naphthalene exposure. In particular, the endocrine-disrupting and genetic toxic effects caused by benzene, toluene, styrene, and naphthalene should not be overlooked. Thus, it is essential to provide precedence to the working environment conditions of workshop laborers, while also undertaking scientific and systematic measures to mitigate the detrimental impacts of VOCs on the environment and human welfare.

Ozone sensitivity to high energy demand day electricity and onroad emissions during LISTOS

IMPLICATION STATEMENT

High-resolution coupled meteorology-chemistry modeling in the New York City and surrounding areas is used to model changes in ozone air quality resulting from region-wide onroad transportation emission reductions and NOX reductions from high energy demand day (HEDD) electricity generating units (EGUs). Although reducing onroad emissions by 90% produces the largest change in ozone concentrations, the results also suggest that the ozone photochemical regime becomes more NOx-sensitive as emissions from major regional sectors like onroad transportation continue to decline. Despite being highly localized and variable, emissions from HEDD EGUs can have an added impact on reducing ambient ozone concentrations. As the ozone production regime in the region shifts from VOC-sensitive to NOx-sensitive, the impacts of NOx-titration in the urban core weaken and ozone is more likely to decline with a decrease in NOx emissions such as from HEDD units.

High-Resolution Modeling of Summertime Biogenic Isoprene Emissions in New York City

As cities strive for ambitious increases in tree canopy cover and reductions in anthropogenic volatile organic compound (AVOC) emissions, accurate assessments of the impacts of biogenic VOCs (BVOCs) on air quality become more important. In this study, we aim to quantify the impact of future urban greening on ozone production. BVOC emissions in dense urban areas are often coarsely represented in regional models. We set up a high-resolution (30 m) MEGAN (The Model of Emissions of Gases and Aerosols from Nature version 3.2) to estimate summertime biogenic isoprene emissions in the New York City metro area (NYC-MEGAN). Coupling an observation-constrained box model with NYC-MEGAN isoprene emissions successfully reproduced the observed isoprene concentrations in the city core. We then estimated future isoprene emissions from likely urban greening scenarios and evaluated the potential impact on future ozone production. NYC-MEGAN predicts up to twice as much isoprene emissions in NYC as the coarse-resolution (1.33 km) Biogenic Emission Inventory System version 3.61 (BEIS) on hot summer days. We find that BVOCs drive ozone production on hot summer days, even in the city core, despite large AVOC emissions. If high isoprene emitting species (e.g., oak trees) are planted, future isoprene emissions could increase by 1.4-2.2 times in the city core, which would result in 8-19 ppbv increases in peak ozone on ozone exceedance days with current NOx concentrations. We recommend planting non- or low-isoprene emitting trees in cities with high NOx concentrations to avoid an increase in the frequency and severity of future ozone exceedance events.

Oxidation Mechanism and Toxicity Evolution of Linalool, a Typical Indoor Volatile Chemical Product

Linalool, a high-reactivity volatile chemical product (VCP) commonly found in cleaning products and disinfectants, is increasingly recognized as an emerging contaminant, especially in indoor air. Understanding the gas-phase oxidation mechanism of linalool is crucial for assessing its impact on atmospheric chemistry and human health. Using quantum chemical calculations and computational toxicology simulations, we investigated the atmospheric transformation and toxicity evolution of linalool under low and high NO/HO2· levels, representing indoor and outdoor environments. Our findings reveal that linalool can undergo the novel mechanisms involving concerted peroxy (RO2·) and alkoxy radical (RO·) modulated autoxidation, particularly emphasizing the importance of cyclization reactions indoors. This expands the widely known RO2·-dominated H-shift-driven autoxidation and proposes a generalized autoxidation mechanism that leads to the formation of low-volatility secondary organic aerosol (SOA) precursors. Toxicological analysis shows that over half of transformation products (TPs) exhibited higher carcinogenicity and respiratory toxicity compared to linalool. We also propose time-dependent toxic effects of TPs to assess their long-term toxicity. Our results indicate that the strong indoor emission coupled with slow consumption rates lead to significant health risks under an indoor environment. The results highlight complex indoor air chemistry and health concerns regarding persistent toxic products during indoor cleaning, which involves the use of linalool or other VCPs.

Mobile VOC measurements in Commerce City, CO reveal the emissions from different sources

Source attribution of volatile organic compounds (VOCs) can be challenging in urban areas, which have many point sources. Mobile laboratories using time-of-flight mass spectrometers (TOF-MS) can take measurements throughout areas of concern, resulting in data with high spatial resolution that can be used to more easily identify these sources. However, emissions in heavily polluted areas still undergo significant mixing over short distances, making source attribution of some compounds challenging. Positive matrix factorization (PMF) has been widely used for attributing pollutants to different sources when taking stationary measurements due to its ability to process large amounts of data into generally interpretable results. However, some limitations of PMF can impact its usefulness to mobile data; PMF is a computationally intensive process, requires some user choices in attributing factors to emissions sources, and results can be significantly impacted by chemical transformations after emission. Here, both PMF and a simpler comparative analysis method are evaluated in analyzing measurements taken in the Elyria Swansea neighborhood of Commerce City, CO. This neighborhood is located near an oil refinery, a wastewater treatment plant, local industrial shops, and major highways. PMF failed to differentiate between oil refinery emissions and traffic emissions, and had difficulties recognizing other key sources. A simpler comparative analysis showed that the refinery contributed significantly to VOC concentrations throughout the neighborhood, including air toxics such as benzene. A wastewater treatment plant contributed to methanethiol and dimethyl sulfide. Finally, a small woodshop was identified as a hyperlocal VOC source, and contributed high amounts of some VOCs, such as toluene and other solvents, in its immediate surroundings.Implications Statement: This work discusses mobile measurements of VOCs around Commerce City, CO, a heavily polluted urban area north of Denver, using a PTR-TOF-MS. Two different source attribution methods, positive matrix factorization (PMF) and comparative analysis, were evaluated in the context of mobile measurements. The results show that an oil refinery and a woodshop contributed greatly to many VOC concentrations in the Elyria Swansea residential area of Commerce City. Additional sources, such as a wastewater treatment plant, also contributed to some odorous VOCs. PMF was unable to fully describe sources based on the mobile data. Comparative analysis was useful in attributing more VOCs to different sources, but quantitative results were influenced by how the analysis is set up. These findings are relevant to the residents of Denver and regulatory bodies to better understand Denver air pollution, as well as to other mobile studies doing source attribution of VOCs.

Evaporation-Induced Transformations in Volatile Chemical Product-Derived Secondary Organic Aerosols: Browning Effects and Alterations in Oxidative Reactivity

Volatile chemical products (VCPs) are increasingly recognized as significant sources of volatile organic compounds (VOCs) in urban atmospheres, potentially serving as key precursors for secondary organic aerosol (SOA) formation. This study investigates the formation and physicochemical transformations of VCP-derived SOA, produced through ozonolysis of VOCs evaporated from a representative room deodorant air freshener, focusing on the effects of aerosol evaporation on its molecular composition, light absorption properties, and reactive oxygen species (ROS) generation. Following aerosol evaporation, solutes become concentrated, accelerating reactions within the aerosol matrix that lead to a 42% reduction in peroxide content and noticeable browning of the SOA. This process occurs most effectively at moderate relative humidity (∼40%), reaching a maximum solute concentration before aerosol solidification. Molecular characterization reveals that evaporating VCP-derived SOA produces highly conjugated nitrogen-containing products from interactions between existing or transformed carbonyl compounds and reduced nitrogen species, likely acting as chromophores responsible for the observed brownish coloration. Additionally, the reactivity of VCP-derived SOA was elucidated through heterogeneous oxidation of sulfur dioxide (SO2), which revealed enhanced photosensitized sulfate production upon drying. Direct measurements of ROS, including singlet oxygen (1O2), superoxide (O2•-), and hydroxyl radicals (•OH), showed higher abundances in dried versus undried SOA samples under light exposure. Our findings underscore that drying significantly alters the physicochemical properties of VCP-derived SOA, impacting their roles in atmospheric chemistry and radiative balance.

Organic Emissions of Volatile Chemical Products in Canada: Emission Inventories, Indoor-to-Outdoor Transfer, and Regional Impacts

The contribution of volatile chemical products (VCPs) to ambient air pollution has increased following decades of regulating combustion sources. There is a research gap concerning the impact of indoor physicochemical phenomena on VCP emissions. In this work, a bottom-up speciated VCP emission inventory with indoor-outdoor resolution was developed for Canada, an industrialized country with low air pollution levels, whose major cities are among the largest urban areas in North America. VCPs were estimated to account for about 290 kilotons of gaseous organic emissions for a typical year in the 2010s, with more than 60% of emissions occurring indoors. Coatings and cleaners were the most emissive VCP categories. Oxygenated species and saturated aliphatics dominated the chemical profiles of most emissions. Less than 5% of VCP emissions were impacted by indoor physicochemical phenomena. VCP emissions were predicted to account for 0.8-3.2 s-1 of OH reactivity and 0.22-0.52 μg/m3 of secondary organic aerosol formation potential in major urban areas in Canada. Our predictions aligned with previous measurements concerning indoor and outdoor organic pollutant levels, underscoring the important air quality impacts of VCPs relative to other sources. Our results provide helpful insights for future research regarding VCP emissions, especially from indoor spaces.

Temperature-dependent emissions dominate aerosol and ozone formation in Los Angeles

Despite declines in transportation emissions, urban North America and Europe still face unhealthy air pollution levels. This has challenged conventional understanding of the sources of their volatile organic compound (VOC) precursors. Using airborne flux measurements to map emissions of a wide range of VOCs, we demonstrate that biogenic terpenoid emissions contribute ~60% of emitted VOC OH reactivity, ozone, and secondary organic aerosol formation potential in summertime Los Angeles and that this contribution strongly increases with temperature. This implies that control of nitrogen oxides is key to reducing ozone formation in Los Angeles. We also show some anthropogenic VOC emissions increase with temperature, which is an effect not represented in current inventories. Air pollution mitigation efforts must consider that climate warming will strongly change emission amounts and composition.

Mapping urban haze

Direct airborne measurements of emission fluxes reveal major sources over California.

Diurnal emission variation of ozone precursors: Impacts on ozone formation during Sep. 2019

With the issue of ozone (O3) pollution having increasingly gained visibility and prominence in China, the Chinese government explored various policies to mitigate O3 pollution. In some provinces and cities, diurnal regulations of O3 precursor were implemented, such as shifting O3 precursor emission processes to nighttime and offering preferential refueling at night. However, the effectiveness of these policies remains unverified, and their impact on the O3 generation process requires further elucidation. In this study, we utilized a regional climate and air quality model (WRF-Chem, v4.5) to test three scenarios aimed at exploring the impact of diurnal industry emission variation of O3 precursors on O3 formation. Significant O3 variations were observed mainly in urban areas. Shifting volatile organic compounds (VOCs) to nighttime have slight decreased daytime O3 levels while moving nitrogen oxides (NOx) to nighttime elevates O3 levels. Simultaneously moving both to nighttime showed combined effects. Process analysis indicates that the diurnal variation in O3 was mainly attributed to chemical process and vertical mixing in urban areas, while advection becomes more important in non-urban areas, contributing to the changes in O3 and O3 precursors levels through regional transportation. Further photochemical analysis reveals that the O3 photochemical production in urban areas was affected by reduced daytime O3 precursors emissions. Specifically, decreasing VOCs lowered the daytime O3 production by reducing the ROx radicals (ROx = HO + HO˙2 + RO˙2), whereas decreasing NOx promoted the daytime O3 production by weakening ROx radical loss. Our results demonstrate that diurnal regulation of O3 precursors will disrupt the ROx radical and O3 formation in local areas, resulting in a change in O3 concentration and atmospheric oxidation capacity, which should be considered in formulating new relevant policies.

Concentrations of Volatile Methyl Siloxanes in New York City Reflect Emissions from Personal Care and Industrial Use

Volatile methyl siloxanes (VMS) are a group of organosilicon compounds of interest because of their potential health effects, their ability to form secondary organic aerosols, and their use as tracer compounds. VMS are emitted in the gas-phase from using consumer and personal care products, including deodorants, lotions, and hair conditioners. Because of this emission route, airborne concentrations are expected to increase with population density, although there are few studies in large urban centers. Here, we report summertime concentrations and daily variations of VMS congeners measured in New York City. Median concentrations of the 6 studied congeners, D3 (20 ng m-3), D4 (57 ng m-3), D5 (230 ng m-3), D6 (11 ng m-3), L5 (2.5 ng m-3), and L7 (1.3 ng m-3) are among the highest reported outdoor concentrations in the literature to date. Average congener ratios of D5:D4 and D5:D6 were consistent with previously reported emissions ratios, suggesting that concentrations were dominated by local emissions. Measured concentrations agree with previously published results from a Community Multiscale Air Quality model and support commonly accepted emissions rates for D4, D5, and D6 of 32.8, 135, and 6.1 mg per capita per day. Concentrations of D4, D5, D6, L5, and L7 and total VMS were significantly lower during the day than during the night, consistent with daytime oxidation reactivity. Concentrations of D3 did not show the same diurnal trend but exhibited a strong directional dependence, suggesting that it may be emitted by industrial point sources in the area rather than personal care product use. Concentrations of all congeners had large temporal variations but showed relatively weak relationships with wind speed, temperature, and mixing height.

Fostering a Holistic Understanding of the Full Volatility Spectrum of Organic Compounds from Benzene Series Precursors through Mechanistic Modeling

A comprehensive understanding of the full volatility spectrum of organic oxidation products from the benzene series precursors is important to quantify the air quality and climate effects of secondary organic aerosol (SOA) and new particle formation (NPF). However, current models fail to capture the full volatility spectrum due to the absence of important reaction pathways. Here, we develop a novel unified model framework, the integrated two-dimensional volatility basis set (I2D-VBS), to simulate the full volatility spectrum of products from benzene series precursors by simultaneously representing first-generational oxidation, multigenerational aging, autoxidation, dimerization, nitrate formation, etc. The model successfully reproduces the volatility and O/C distributions of oxygenated organic molecules (OOMs) as well as the concentrations and the O/C of SOA over wide-ranging experimental conditions. In typical urban environments, autoxidation and multigenerational oxidation are the two main pathways for the formation of OOMs and SOA with similar contributions, but autoxidation contributes more to low-volatility products. NOx can reduce about two-thirds of OOMs and SOA, and most of the extremely low-volatility products compared to clean conditions, by suppressing dimerization and autoxidation. The I2D-VBS facilitates a holistic understanding of full volatility product formation, which helps fill the large gap in the predictions of organic NPF, particle growth, and SOA formation.

Characterization of organic vapors by a Vocus proton-transfer-reaction mass spectrometry at a mountain site in southeastern China

Biogenic and anthropogenic organic vapors are crucial precursors of ozone and secondary organic aerosol (SOA) in the atmosphere. Here we conducted real-time measurements of gaseous organic compounds using a Vocus proton-transfer-reaction mass spectrometer (Vocus PTR-MS) at the Shanghuang mountain site (1128 m a.s.l.) in southeastern China during November 2022. Our results revealed a substantial impact of mixed biogenic and anthropogenic compounds at the mountain site, with oxygenated volatile organic compounds (OVOCs) comprising 74 % of the organic vapors. Two distinct periods, characterized by sunny days (P1) and persistent cloud events (P2), were observed. P1 exhibited higher concentrations of biogenic-related emissions compared to P2. For instance, isoprene, monoterpenes, and sesquiterpenes during P1 were 2.4-2.9 times higher than those during P2. OVOCs such as acetaldehyde, MVK + MACR, acetone, and MEK also showed higher concentrations during P1, indicating a dominant source from the photochemical oxidation of biogenic VOCs. Anthropogenic-related VOCs like benzene and toluene had higher concentrations during P2, displaying different diurnal cycles compared to P1. Our analysis identified four biogenic-related factors dominated by isoprene and sesquiterpene oxidation products, and two anthropogenic-related factors. During P1, biogenic sources contributed approximately 80 % to total organic compounds, while during P2, anthropogenic sources, particularly the aromatic-related factor, increased from 16 % to 35 %. Furthermore, a unique factor characterized by C2 amines and C3 amides and periodic plumes indicated the influence of industrial emissions from regional transport. The study highlights the significant variations in sources and compositions of gaseous organic compounds at regional mountain sites due to changes in meteorology and photochemical processing, potentially impacting regional ozone and SOA formation.

Indoor Air Sources of Outdoor Air Pollution: Health Consequences, Policy, and Recommendations: An Official American Thoracic Society Workshop Report

Indoor sources of air pollution worsen indoor and outdoor air quality. Thus, identifying and reducing indoor pollutant sources would decrease both indoor and outdoor air pollution, benefit public health, and help address the climate crisis. As outdoor sources come under regulatory control, unregulated indoor sources become a rising percentage of the problem. This American Thoracic Society workshop was convened in 2022 to evaluate this increasing proportion of indoor contributions to outdoor air quality. The workshop was conducted by physicians and scientists, including atmospheric and aerosol scientists, environmental engineers, toxicologists, epidemiologists, regulatory policy experts, and pediatric and adult pulmonologists. Presentations and discussion sessions were centered on 1) the generation and migration of pollutants from indoors to outdoors, 2) the sources and circumstances representing the greatest threat, and 3) effective remedies to reduce the health burden of indoor sources of air pollution. The scope of the workshop was residential and commercial sources of indoor air pollution in the United States. Topics included wood burning, natural gas, cooking, evaporative volatile organic compounds, source apportionment, and regulatory policy. The workshop concluded that indoor sources of air pollution are significant contributors to outdoor air quality and that source control and filtration are the most effective measures to reduce indoor contributions to outdoor air. Interventions should prioritize environmental justice: Households of lower socioeconomic status have higher concentrations of indoor air pollutants from both indoor and outdoor sources. We identify research priorities, potential health benefits, and mitigation actions to consider (e.g., switching from natural gas to electric stoves and transitioning to scent-free consumer products). The workshop committee emphasizes the benefits of combustion-free homes and businesses and recommends economic, legislative, and education strategies aimed at achieving this goal.

Characteristics and sources of oxygenated VOCs in Hong Kong: Implications for ozone formation

To investigate the characteristics of oxygenated volatile organic compounds (OVOCs) and their potential contribution to ozone (O3) generation, we conducted 3-h high-resolution observations during the summertime of 2022 and the wintertime of 2021. This study focused on a total of 28 OVOCs in five different chemical classes, which were encompassed at two representative sites in Hong Kong, including a roadside and an urban area. During the summertime, the total concentrations of quantified OVOCs (∑OVOCs) were 45 ± 12 and 63 ± 20 μg m-3 at the roadside and urban sites, respectively, whereas the ∑OVOCs decreased by 31 ± 11 % and 38 ± 13 %, respectively, during the wintertime. Among the classes of OVOCs, carbonyls and alcohols were the two predominant at both sites, with relatively higher concentration levels of acetone, methanol, butanaldehyde, and acrolein. The sources of OVOCs have significant spatial and temporal characteristics. Spatially, OVOCs were predominately attributed to primary emission and background at the roadside site, whereas they were a combination of primary emission, secondary formation, and background at the urban site. Temporally, background sources dominated the summertime OVOCs, while the contribution of primary emissions increased for the wintertime OVOCs. The O3 formation potential (OFP) for the OVOCs was calculated. The OFPs were 67 ± 16 and 119 ± 31 μg m-3 at the roadside and urban sites during the summertime, whereas the winter OFPs declined 30 % at the roadside and 38 % at the urban site. The background sources of carbonyls and alcohols at the roadside and of carbonyls and acrylates in the urban area were the major contributors to the summer OFP. Controlling the OVOC sources from local non-combustion sources such as gasoline-fuel evaporation and volatile chemical-containing products could lead to a reduction of OVOCs in the background and subsequently mitigate the OFP. This is beneficial for local O3 reduction in Hong Kong and surrounding regions.

Limonene Enantiomeric Ratios from Anthropogenic and Biogenic Emission Sources

Emissions from volatile chemical products (VCPs) have been identified as contributors to air quality degradation in urban areas. Limonene can be a tracer compound for VCPs containing fragrances in densely populated regions, but limonene is also emitted from conifers that are planted in urban areas. This creates challenges for using limonene to estimate VCP emissions. In this study, the -/+ enantiomeric ratios of limonene from VCP and conifer emission sources were quantified to evaluate if this measurement could be used to aid in source apportionment and emission inventory development. Samples were analyzed using a gas chromatograph equipped with a chiral column and mass spectrometry. The results demonstrate that limonene exhibits distinct enantiomeric ratios when sourced from VCPs versus conifers. (+)-Limonene was dominant in VCP sources (>97%), which was not universally true for conifer sources. The results were compared to those of air samples collected outside at two locations and indoors. The levels of (-)-limonene in outdoor air in Irvine and Portland and in indoor air were 50%, 22%, and 4%, respectively. This suggests outdoor limonene had both VCP and plant emission sources while indoor air was dominated by VCP sources. This study demonstrates the potential utility of enantiomeric analysis for improving VCP emission estimates in urban areas.

Large Decreases in Tailpipe Criteria Pollutant Emissions from the U.S. Light-Duty Vehicle Fleet Expected in 2020-2040

The U.S. EPA MOVES3 model was used to assess the impact of the large-scale introduction of electric vehicles on emissions of criteria pollutants (CO, hydrocarbons [HC], NOx, and particulate matter [PM]) and CO2 from the U.S. light-duty vehicle fleet. Large reductions in emissions of these criteria pollutants occurred in 2000-2020. These trends are expected to continue through 2040 driven by turnover of the conventional fleet with old vehicles being replaced by battery electric vehicles (BEVs) and by new internal combustion engine vehicles (ICEVs) with modern emission control systems. Without the introduction of BEVs, the absolute emissions of CO, NOx, HC, and PM2.5 from the U.S. light-duty vehicle fleet are expected to decrease by approximately 61, 88, 55, and 20% from 2020 to 2040. Introduction of BEVs with market share increasing linearly to 100% in 2040 provides additional benefits, which, combined with ICEV fleet turnover, would lead to decreases of absolute emissions of CO, NOx, HC, and PM2.5 of approximately 77, 94, 71, and 37% from 2020 to 2040. Reductions in CO2 emissions follow a similar pattern. Large decreases in criteria pollutant and CO2 emissions from light duty vehicles lie ahead.

Differentiated emissions and secondary organic aerosol formation potential of organic vapor from industrial coatings in China

Organic vapors emitted during solvent use are important precursors of secondary organic aerosols (SOAs). Industrial coatings are a major class of solvents that emit volatile and intermediate volatile organic compounds (VOCs and IVOCs, respectively). However, the emission factors and source profiles of VOCs and IVOCs from industrial coatings remain unclear. In this study, representative solvent- and water-based industrial paints were evaporated, sampled and tested using online and offline instruments. The VOC and IVOC emission factors for solvent-based paints are 129-254 and 25-80 g/kg, while for water-based paint are 13 and 32 g/kg, respectively. In solvent-based paints, the VOCs are mainly aromatics, while the IVOCs are composed of long-chain alkanes, alkenes, carbonyls and halocarbons. The VOCs and IVOCs in water-based paint are mostly oxygenates, such as ethanol, acetone, ethylene glycol, and Texanol. During the evaporation of solvent-based paints, the fraction of IVOCs increases along with those of alkenes and aldehydes, while the proportion of aromatics decreases. For water-based paint, the fraction of IVOCs slightly decreases with evaporation. The SOA formation potentials of solvent-based paints are 8.6-28.0 g/kg, much higher than that of water-based paint (0.65 g/kg); thus, substituting solvent-based paints with water-based paints may significantly decrease SOA formation.

Improved Spatial Resolution in Modeling of Nitrogen Oxide Concentrations in the Los Angeles Basin

The extent to which emission control technologies and policies have reduced anthropogenic NOx emissions from motor vehicles is large but uncertain. We evaluate a fuel-based emission inventory for southern California during the June 2021 period, coinciding with the Re-Evaluating the Chemistry of Air Pollutants in CAlifornia (RECAP-CA) field campaign. A modified version of the Fuel-based Inventory of Vehicle Emissions (FIVE) is presented, incorporating 1.3 km resolution gridding and a new light-/medium-duty diesel vehicle category. NOx concentrations and weekday-weekend differences were predicted using the WRF-Chem model and evaluated using satellite and aircraft observations. Model performance was similar on weekdays and weekends, indicating appropriate day-of-week scaling of NOx emissions and a reasonable distribution of emissions by sector. Large observed weekend decreases in NOx are mainly due to changes in on-road vehicle emissions. The inventory presented in this study suggests that on-road vehicles were responsible for 55-72% of the NOx emissions in the South Coast Air Basin, compared to the corresponding fraction (43%) in the planning inventory from the South Coast Air Quality Management District. This fuel-based inventory suggests on-road NOx emissions that are 1.5 ± 0.4, 2.8 ± 0.6, and 1.3 ± 0.7 times the reference EMFAC model estimates for on-road gasoline, light- and medium-duty diesel, and heavy-duty diesel, respectively.

Emission of volatile organic compounds from residential biomass burning and their rapid chemical transformations

Biomass combustion releases a complex array of Volatile Organic Compounds (VOCs) that pose significant challenges to air quality and human health. Although biomass burning has been extensively studied at ecosystem levels, understanding the atmospheric transformation and impact on air quality of emissions in urban environments remains challenging due to complex sources and burning materials. In this study, we investigate the VOC emission rates and atmospheric chemical processing of predominantly wood burning emissions in a small urban centre in Greece. Ioannina is situated in a valley within the Dinaric Alps and experiences intense atmospheric pollution accumulation during winter due to its topography and high wood burning activity. During pollution event days, the ambient mixing ratios of key VOC species were found to be similar to those reported for major urban centres worldwide. Positive matrix factorisation (PMF) analysis revealed that biomass burning was the dominant emission source (>50 %), representing two thirds of OH reactivity, which indicates a highly reactive atmospheric mixture. Calculated OH reactivity ranges from 5 s-1 to an unprecedented 278 s-1, and averages at 93 ± 66 s-1 at 9 PM, indicating the presence of exceptionally reactive VOCs. The highly pronounced photochemical formation of organic acids coincided with the formation of ozone, highlighting the significance of secondary formation of pollutants in poorly ventilated urban areas. Our findings underscore the pressing need to transition from wood burning to environmentally friendly sources of energy in poorly ventilated urban areas, in order to improve air quality and safeguard public health.

Siloxane Emissions and Exposures during the Use of Hair Care Products in Buildings

Cyclic volatile methyl siloxanes (cVMS) are ubiquitous in hair care products (HCPs). cVMS emissions from HCPs are of concern, given the potential adverse impact of siloxanes on the environment and human health. To characterize cVMS emissions and exposures during the use of HCPs, realistic hair care experiments were conducted in a residential building. Siloxane-based HCPs were tested using common hair styling techniques, including straightening, curling, waving, and oiling. VOC concentrations were measured via proton-transfer-reaction time-of-flight mass spectrometry. HCP use drove rapid changes in the chemical composition of the indoor atmosphere. cVMS dominated VOC emissions from HCP use, and decamethylcyclopentasiloxane (D5) contributed the most to cVMS emissions. cVMS emission factors (EFs) during hair care routines ranged from 110-1500 mg/person and were influenced by HCP type, styling tools, operation temperatures, and hair length. The high temperature of styling tools and the high surface area of hair enhanced VOC emissions. Increasing the hair straightener temperature from room temperature to 210 °C increased cVMS EFs by 50-310%. Elevated indoor cVMS concentrations can result in substantial indoor-to-outdoor transport of cVMS via ventilation (0.4-6 tons D5/year in the U.S.); thus, hair care routines may augment the abundance of cVMS in the outdoor atmosphere.

Temporal and spatial shifts in the chemical composition of urban coastal rainwaters of Kuwait: The role of air mass trajectory and meteorological variables

The rainwater chemistry encompasses the signatures of geogenic and anthropogenic processes along the regional air mass movement apart from the local sources. The predominance of dust events and anthropogenic emissions in arid regions facilitate new particle formation. Further, rain events of different seasons depict moisture sources from diverse regions reflecting variation in the regional geochemistry with respect to seasons. Hence, to characterize the geochemical composition of rainwater, the study has focused on an integrated approach by considering regional transport, meteorological components and possible local sources. A total of 74 rainwater samples were collected from 27 rain events in 2018, 2019, and 2022, representing urban coastal areas of Kuwait predominantly of Ca-SO4-HCO3 type. The average pH and electrical conductivity of the rainwater were 7.18 and 140 μS/cm, respectively. The sea salt fractions calculated relative to Kuwait seawater ranged from 25.6 to >100 %, with higher values attributed to anthropogenic sources. Sea salt fraction, ion ratios, principal component analysis and factor scores revealed the terrestrial and anthropogenic sources apart from marine contributions. In addition, new particle formation and aerosols contributed to the rainwater chemistry involving SOx, NOx, and photochemical reactions during higher relative humidity and lesser wind speed. The HYSPLIT reflected that the moisture sources were largely from western regions of the study area, and those of December and January events had long-distance travel across the Azores high originating from northeast America. The trajectories of the November events are observed to originate from the Caspian/Black Sea region in the northeastern part of Kuwait with a relatively shorter distance of travel. The rainfall samples had higher ionic concentrations, and saturated with aragonite and calcite minerals in a few locations specifically after the dust events, while the subsequent rain events were less polluted.

Volatile organic compounds emitted by conventional and "green" cleaning products in the U.S. market

Exposure to cleaning products has been associated with harm to the respiratory system, neurotoxicity, harm to the reproductive system, and elevated risk of cancer, with greatest adverse impacts for workers exposed in an occupational setting. Social and consumer interest in cleaning products that are safer for health created a market category of "green" products defined here as products advertised as healthier, non-toxic, or free from harmful chemicals as well as products with a third-party certification for safety or environmental features. In the present study we examined the air quality impacts of cleaning products and air fresheners, measuring the number, concentrations, and emission factors of volatile organic compounds (VOCs) in an air chamber following product application. Across seven common product categories, 30 products were tested overall including 14 conventional, 9 identified as "green" with fragrance, and 7 identified as "green" and fragrance-free. A total of 530 unique VOCs were quantified with 205 additional VOCs detected below the limits of quantification. Of the quantifiable VOCs, 193 were considered hazardous according to either the California's Department of Toxic Substances Control Candidate Chemicals List or the European Chemical Agency's Classification and Labeling Inventory. The total concentration of VOCs and total emission factors across all products with detections ranged from below limits of detection to 18,708 μg/m3, 38,035 μg/g product and 3803 μg/application. Greater total concentration, total emission factors, and numbers of VOCs were generally observed in conventional cleaning products compared to products identified as "green", particularly compared to fragrance-free products. A hazard index approach was utilized to assess relative risk from measured VOC emissions. The five products with the highest hazard indices were conventional products with emissions of 2-butoxyethanol, isopropanol, toluene and chloroform. Overall, this analysis suggests that the use of "green" cleaning products, especially fragrance-free products, may reduce exposure to VOC emissions.

Global Anthropogenic Emissions of Full-Volatility Organic Compounds

Traditional global emission inventories classify primary organic emissions into nonvolatile organic carbon and volatile organic compounds (VOCs), excluding intermediate-volatility and semivolatile organic compounds (IVOCs and SVOCs, respectively), which are important precursors of secondary organic aerosols. This study establishes the first global anthropogenic full-volatility organic emission inventory with chemically speciated or volatility-binned emission factors. The emissions of extremely low/low-volatility organic compounds (xLVOCs), SVOCs, IVOCs, and VOCs in 2015 were 13.2, 10.1, 23.3, and 120.5 Mt, respectively. The full-volatility framework fills a gap of 18.5 Mt I/S/xLVOCs compared with the traditional framework. Volatile chemical products (VCPs), domestic combustion, and on-road transportation sources were dominant contributors to full-volatility emissions, accounting for 30, 30, and 12%, respectively. The VCP and on-road transportation sectors were the main contributors to IVOCs and VOCs. The key emitting regions included Africa, India, Southeast Asia, China, Europe, and the United States, among which China, Europe, and the United States emitted higher proportions of IVOCs and VOCs owing to the use of cleaner fuel in domestic combustion and more intense emissions from VCPs and on-road transportation activities. The findings contribute to a better understanding of the impact of organic emissions on global air pollution and climate change.

Comparison between Spatially Resolved Airborne Flux Measurements and Emission Inventories of Volatile Organic Compounds in Los Angeles

Los Angeles is a major hotspot for ozone and particulate matter air pollution in the United States. Ozone and PM2.5 in this region have not improved substantially for the past decade, despite a reduction in vehicular emissions of their precursors, NOx and volatile organic compounds (VOCs). This reduction in "traditional" sources has made the current emission mixture of air pollutant precursors more uncertain. To map and quantify emissions of a wide range of VOCs in this urban area, we performed airborne eddy covariance measurements with wavelet analysis. VOC fluxes measured include tracers for source categories, such as traffic, vegetation, and volatile chemical products (VCPs). Mass fluxes were dominated by oxygenated VOCs, with ethanol contributing ∼29% of the total. In terms of OH reactivity and aerosol formation potential, terpenoids contributed more than half. Observed fluxes were compared with two commonly used emission inventories: the California Air Resources Board inventory and the combination of the Biogenic Emission Inventory System with the Fuel-based Inventory of Vehicle Emissions combined with Volatile Chemical Products (FIVE-VCP). The comparison shows mismatches regarding the amount, spatial distribution, and weekend effects of observed VOC emissions with the inventories. The agreement was best for typical transportation related VOCs, while discrepancies were larger for biogenic and VCP-related VOCs.

Summertime tropospheric ozone source apportionment study in the Madrid region (Spain)

The design of emission abatement measures to effectively reduce high ground-level ozone (O3) concentrations in urban areas is very complex. In addition to the strongly non-linear chemistry of this secondary pollutant, precursors can be released by a variety of sources in different regions, and locally produced O3 is mixed with that transported from the regional or continental scales. All of these processes depend also on the specific meteorological conditions and topography of the study area. Consequently, high-resolution comprehensive modeling tools are needed to understand the drivers of photochemical pollution and to assess the potential of local strategies to reduce adverse impacts from high tropospheric O3 levels. In this study, we apply the Integrated Source Apportionment Method (ISAM) implemented in the Community Multiscale Air Quality (CMAQ v5.3.2) model to investigate the origin of summertime O3 in the Madrid region (Spain). Consistent with previous studies, our results confirm that O3 levels are dominated by non-local contributions, representing around 70 % of mean values across the region. Nonetheless, precursors emitted by local sources, mainly road traffic, play a more important role during O3 peaks, with contributions as high as 25 ppb. The potential impact of local measures is higher under unfavorable meteorological conditions associated with regional accumulation patterns. These findings suggest that this modeling system may be used in the future to simulate the potential outcomes of specific emission abatement measures to prevent high-O3 episodes in the Madrid metropolitan area.

Secondary Organic Aerosol Formation from Volatile Chemical Product Emissions: Model Parameters and Contributions to Anthropogenic Aerosol

Volatile chemical products (VCP) are an increasingly important source of hydrocarbon and oxygenated volatile organic compound (OVOC) emissions to the atmosphere, and these emissions are likely to play an important role as anthropogenic precursors for secondary organic aerosol (SOA). While the SOA from VCP hydrocarbons is often accounted for in models, the formation, evolution, and properties of SOA from VCP OVOCs remain uncertain. We use environmental chamber data and a kinetic model to develop SOA parameters for 10 OVOCs representing glycols, glycol ethers, esters, oxygenated aromatics, and amines. Model simulations suggest that the SOA mass yields for these OVOCs are of the same magnitude as widely studied SOA precursors (e.g., long-chain alkanes, monoterpenes, and single-ring aromatics), and these yields exhibit a linear correlation with the carbon number of the precursor. When combined with emissions inventories for two megacities in the United States (US) and a US-wide inventory, we find that VCP VOCs react with OH to form 0.8-2.5× as much SOA, by mass, as mobile sources. Hydrocarbons (terpenes, branched and cyclic alkanes) and OVOCs (terpenoids, glycols, glycol ethers) make up 60-75 and 25-40% of the SOA arising from VCP use, respectively. This work contributes to the growing body of knowledge focused on studying VCP VOC contributions to urban air pollution.

Characterizing sources and ozone formations of summertime volatile organic compounds observed in a medium-sized city in Yangtze River Delta region

Volatile organic compounds (VOCs) emitted from various sources into atmosphere could cause serious O₃ pollution in urban areas. Although characterizations of ambient VOCs have been extensively studied in megacities, they are scarcely investigated in medium/small-sized cities, which could present different pollution characterizations due to the factors like emission sources and populations. Herein, field campaigns were conducted concurrently at six sites in a medium-sized city of Yangtze River Delta region to determine ambient levels, O₃ formations and source contributions of summertime VOCs. During the observation period, the total VOC (TVOCs) mixing ratios ranged from 27.10 ± 3.35 to 39.09 ± 10.84 ppb at six sites. The ozone formation potential (OFP) results showed that alkenes, aromatics and oxygenated VOCs (OVOCs) were dominant contributors, together sharing 81.4% of total calculated OFPs. Ethene ranked the largest OFP contributor at all six sites. A high VOC site, KC, was selected as a case to detailed analyze diurnal variations of VOCs and its relationship with O₃. Consequently, diurnal patterns varied with VOC groups, and TVOC concentrations were lowest during strong photochemical period (15:00-18:00 p.m.), opposite to the O₃ peak. VOCs/NOx ratios and observation-based model (OBM) analysis revealed that O₃ formation sensitivity was primarily in transition regime in summertime and that the reduction of VOCs rather than NO_X would be more efficient to suppress O₃ peak at KC during pollution episode. Additionally, source apportionment conducted with positive matrix factorization (PMF) indicated that industrial emission (29.2%-51.7%) and gasoline exhaust (22.4%-41.1%) were major sources for VOCs at all six sites, and that VOCs from industrial emissions and gasoline exhaust were the key precursors for ozone formation. Our results shed light on the importance of alkenes, aromatics and OVOCs in forming O₃ and propose that preferentially reducing VOCs especially those from industrial emission and gasoline exhaust would benefit alleviating O₃ pollution.

Policy-Related Gains in Urban Air Quality May Be Offset by Increased Emissions in a Warming Climate

Air quality policies have made substantial gains by reducing pollutant emissions from the transportation sector. In March 2020, New York City's activities were severely curtailed in response to the COVID-19 pandemic, resulting in 60-90% reductions in human activity. We continuously measured major volatile organic compounds (VOCs) during January-April 2020 and 2021 in Manhattan. Concentrations of many VOCs decreased significantly during the shutdown with variations in daily patterns reflective of human activity perturbations, resulting in a temporary ∼28% reduction in chemical reactivity. However, the limited effect of these dramatic measures was outweighed by larger increases in VOC-related reactivity during the anomalously warm spring 2021. This emphasizes the diminishing returns from transportation-focused policies alone and the risk of increased temperature-dependent emissions undermining policy-related gains in a warming climate.

Nonagricultural emissions enhance dimethylamine and modulate urban atmospheric nucleation

Gas-phase dimethylamine (DMA) has recently been identified as one of the most important vapors to initiate new particle formation (NPF), even in China's polluted atmosphere. Nevertheless, there remains a fundamental need for understanding the atmospheric life cycle of DMA, particularly in urban areas. Here we pioneered large-scale mobile observations of the DMA concentrations within cities and across two pan-region transects of north-to-south (∼700 km) and west-to-east (∼2000 km) in China. Unexpectedly, DMA concentrations (mean ± 1σ) in South China with scattered croplands (0.018 ± 0.010 ppbv) were over three times higher than those in the north with contiguous croplands (0.005 ± 0.001 ppbv), suggesting that nonagricultural activities may be an important source of DMA. Particularly in non-rural regions, incidental pulsed industrial emissions led to some of the highest DMA concentration levels in the world (>2.3 ppbv). Besides, in highly urbanized areas of Shanghai, supported by direct source-emission measurements, the spatial pattern of DMA was generally correlated with population (R² = 0.31) due to associated residential emissions rather than vehicular emissions. Chemical transport simulations further show that in the most populated regions of Shanghai, residential DMA emissions can contribute for up to 78% of particle number concentrations. Shanghai is a case study for populous megacities, and the impacts of nonagricultural emissions on local DMA concentration and nucleation are likely similar for other major urban regions globally.

Gas Phase Emissions of Volatile Organic Compounds Arising from the Application of Sunscreens

The speciation of volatile organic compounds (VOCs) emitted from personal care products (PCPs) is complex and contributes to poor air quality and health risks to users via the inhalation exposure pathway. Detailed VOC emission profiles were generated for 26 sunscreen products; consequently, variability was observed between products, even though they were all designed for the same purpose. Some were found to contain fragrance compounds not labelled on their ingredients list. Five contaminant VOCs were identified (benzene, toluene, ethylbenzene, o-xylene, and p-xylene); headspace sampling of an additional 18 randomly selected products indicated that ethanol originating from fossil petroleum was a potential source. The gas phase emission rates of the VOCs were quantified for 15 of the most commonly emitted species using SIFT-MS. A wide range of emission rates were observed between the products. Usage estimates were made based on the recommended dose per body surface area, for which the total mass of VOCs emitted from one full-body application dose was in the range of 1.49 × 103-4.52 × 103 mg and 1.35 × 102-4.11 × 102 mg for facial application (men aged 16+; children aged 2-4). Depending on age and sex, an estimated 9.8-30 mg of ethanol is inhaled from one facial application of sunscreen.

Assessment of greenhouse emissions of the green bean through the static enclosure technique

Urban green installations are extensively promoted to increase sustainable and accessible food production and simultaneously improve the environmental performance and liveability of city buildings. In addition to the multiple benefits of plant retrofitting, these installations may lead to a consistent increase in biogenic volatile organic compounds (BVOCs) in the urban environment, especially indoors. Accordingly, health concerns could limit the implementation of building-integrated agriculture. In a building-integrated rooftop greenhouse (i-RTG), throughout the whole hydroponic cycle, green bean emissions were dynamically collected in a static enclosure. Four representative BVOCs, α-pinene (monoterpene), β-caryophyllene (sesquiterpene), linalool (oxygenated monoterpene) and cis-3-hexenol (LOX derivate), were investigated in the samples collected from two equivalent sections of a static enclosure, one empty and one occupied by the i-RTG plants, to estimate the volatile emission factor (EF). Throughout the season, extremely variable BVOC levels between 0.04 and 5.36 ppb were found with occasional but not significant (P > 0.05) variations between the two sections. The highest emission rates were observed during plant vegetative development, with EFs equivalent to 78.97, 75.85 and 51.34 ng g^-1 h^-1 for cis-3-hexenol, α-pinene, and linalool, respectively; at plant maturity, all volatiles were either close to the LLOQ (lowest limit of quantitation) or not detected. Consistent with previous studies significant relationships (r ≥ 0.92; P < 0.05) were individuated within volatiles and temperature and relative humidity of the sections. However, correlations were all negative and were mainly attributed to the relevant effect of the enclosure on the final sampling conditions. Overall, levels found were at least 15 folds lower than the given Risk and LCI values of the EU-LCI protocol for indoor environments, suggesting low BVOC exposure in the i-RTG. Statistical outcomes demonstrated the applicability of the static enclosure technique for fast BVOC emissions survey inside green retrofitted spaces. However, providing high sampling performance over entire BVOCs collection is recommended to reduce sampling error and incorrect estimation of the emissions.

Unexpected deterioration of O3 pollution in the South Coast Air Basin of California: The role of meteorology and emissions

Tropospheric ozone (O₃) pollution has long been a prominent environmental threat due to its adverse impacts on vulnerable populations and ecosystems. In recent years, an unexpected increase in O₃ levels over the South Coast Air Basin (SoCAB) of California has been observed despite reduced precursor emissions and the driving factors behind this abnormal condition remain unclear. In this work, we combine ambient measurements, satellite data, and air quality modeling to investigate O₃ and precursor emission trends and explore the impacts of meteorological variability and emission changes on O₃ over the SoCAB from 2012 to 2020. Changes in O₃ trends were characterized by declining O₃ in 2012-2015, and increasing O₃ afterwards with the most extreme O₃ exceedances in 2020. Basin-wide increases of MDA8 O₃ concentrations over warm season were depicted between 2012 and 2020, with the most significant enhancements (5-10 ppb) observed in San Bernardino County. Persistent heatwaves and weak ventilation on consecutive days were closely correlated with O₃ exceedances (r² above 0.6) over inland SoCAB. While decreasing trends in NO_x (-4.1%/yr) and VOC emissions (-1.8%/yr) inferred from emission inventory and satellites during 2012-2020 resulted in a slow transition for O₃ sensitivity from VOCs-limited to NO_x-limited, model simulations performed with fixed meteorology indicate that unfavorable meteorological conditions could largely offset regulation benefits, with meteorology anomaly-induced monthly O₃ changes reaching 20 ppb (May 2020) and the deterioration of O₃ pollution in 2016, 2017, and 2020 was largely attributed to unfavorable meteorological conditions. Nevertheless, anthropogenic emission changes may act as the dominant factor in governing O₃ variations across the SoCAB when net effects of meteorology are neutral (typically 2018). This work provides a comprehensive assessment of O₃ pollution and contributes valuable insights into understanding the long-term changes of O₃ and precursors in guiding future regulation efforts in the SoCAB.

Yields and molecular composition of gas phase and secondary organic aerosol from the photooxidation of the volatile consumer product benzyl alcohol: formation of highly oxygenated and hydroxy nitroaromatic compounds

Recently, volatile chemical products (VCPs) have been increasingly recognized as important precursors for secondary organic aerosol (SOA) and ozone in urban areas. However, their atmospheric chemistry, physical transformation, and their impact on climate, environment and human health remain poorly understood. Here, the yields and chemical composition at the molecular level of gas and particle phase products originating from the photooxidation of one of these VCPs, benzyl alcohol (BnOH), is reported. The SOA was generated in the presence of seed aerosol from nebulized ammonium sulfate solution in a 14.5 m3 smog chamber operated in flow mode. More than 50 organic compounds containing nitrogen and/or up to seven oxygen atoms were identified by mass spectrometry. While a detailed non-targeted analysis has been made, our primary focus has been to examine highly oxygenated and nitro-aromatic compounds. The major components include ring-opening products with high oxygen to carbon ratio (e.g., malic acid, tartaric acids, arabic acid, trihydroxy-oxo-pentanoic acids, and pentaric acid), and ring-retaining products (e.g., benzaldehyde, benzoic acid, catechol, 3-nitrobenzyl alcohol, 4-nitrocatechol, 2-hydroxy-5-nitrobenzyl alcohol, 2-nitrophloroglucinol, 3,4-dihydroxy-5-nitrobenzyl alcohol). The presence of some of these products in the gas and particle phases simultaneously provides evidence of their gas/particle partitioning. These oxygenated oxidation products made dominant contributions to the SOA particle composition in both low and high NOx systems. Yields, organic mass to organic carbon ratio, and proposed reaction schemes for selected compounds are provided. The aerosol yield was 5.2% for BnOH/H2O2 at SOA concentration of 52.9 µg m-3 and ranged between 1.7-8.1 % for BnOH/NOx at SOA concentration of 40.0-119.5 µg m-3.

Estimation of Anthropogenic VOCs Emission Based on Volatile Chemical Products: A Canadian Perspective

Volatile organic compounds (VOCs) in urban areas are of great interest due to their significant role in forming ground-level ozone and adverse public health effects. Emission inventories usually compile the outdoor VOCs emission sources (e.g., traffic and industrial emissions). However, considering emissions from volatile chemical products (e.g., solvents, printing ink, personal care products) is challenging because of scattered data and the lack of an effective method to estimate the VOCs emission rate from these chemical products. This paper aims to systematically analyse potential sources of VOCs emission in Canada's built environment, including volatile chemical products. Also, spatial variation of VOCs level in the ambient atmosphere is examined to understand the VOC relationship with ozone and secondary organic aerosol formation. The study shows that VOCs level may vary among everyday microenvironments (e.g., residential areas, offices, and retail stores) depending on the frequency of product consumption, building age, ventilation condition, and background ambient concentration in the atmosphere. However, it is very difficult to establish VOC speciation and apportionment to different volatile chemical products that contribute most significantly to exposure and target subpopulations with elevated levels. Thus, tracer compounds can be used to identify inventory sources at the consumer end. A critical overview highlights the limitations of existing VOC estimation methods and possible approaches to control VOC emissions. The findings provide crucial information to establish an emission inventory framework for volatile chemical products at a national scale and enable policymakers to limit VOCs emission from various volatile chemical products.

Identification of the roles of urban plume and local chemical production in ozone episodes observed in Long Island Sound during LISTOS 2018: Implications for ozone control strategies

Long Island Sound (LIS) frequently experiences ozone (O₃) exceedance events that surpass national ambient air quality standards (NAAQS) due to complex driving factors. The underlying mechanisms governing summertime O₃ pollution are investigated through collaborative observations from lidar remote sensing and ground samplers during the 2018 LIS Tropospheric O₃ Study (LISTOS). Regional transport and local chemical reactions are identified as the two key driving factors behind the observed O₃ episodes in LIS. An enhanced laminar structure is observed in the O₃ vertical structure in the atmospheric boundary layer (i.e., 0-2 km layer) for the case dominated by regional transport. An O₃ formation regime shift is found in ozone-precursor sensitivity (OPS) for the O₃ exceedance event dominated by regional transport with NO_x-enriched air mass transport from the New York City (NYC) urban area to LIS. Furthermore, the Integrated Process Rate (IPR) analysis demonstrates that transport from the NYC urban area contributed 40% and 27.1% of surface O₃ enhancement to the cases dominated by regional transport and local production, respectively. This study provides scientific evidence to uncovers two key processes that govern summertime O₃ pollution over LIS and can help to improve emission control strategies to meet the attainment standards for ambient O₃ levels over LIS and other similar coastal areas.

Improved emission factors and speciation to characterize VOC emissions in the printing industry in China

Printing industry is one of the most important sources of industrial volatile organic compound (VOC) emissions in China, and is thus a key industrial sector in terms of VOC control. However, process-based VOC emission and speciation from the printing industry have not been well identified, mainly owing to the poor emission factors (EFs) and diversity of source profiles. In this study, we systematically characterized process-based VOC emissions from the printing industry for the period of 2010-2019, through the establishment of improved emission factors and composite source profiles. VOC emissions from the printing industry were found to continuously increase from 2010 to 2018, reaching their maximum in 2018 at 939.8 Gg, but started to decrease afterwards. The substantial growth is driven by the large demand for ink and adhesive and the absence of effective control measures in the printing industry. The total VOC emissions and ozone formation potential (OFP) in China in 2019 were 916.1 Gg and 1834.5 Gg, respectively. Gravure printing and the compound process were the processes that contributed the most to both emissions and OFP. Rapidly developing provinces such as Guangdong, Jiangsu, and Zhejiang were the largest contributors to emissions. Oxygenated VOCs (OVOCs) accounted for most of the VOC emissions, followed by alkanes and aromatics, while aromatics were the dominant groups for total OFP, followed by alkenes/alkynes and OVOCs. Ethyl acetate, toluene, isopropanol, isopentane, and n-pentane were the top five VOC species in terms of emissions, while toluene, ethyl acetate, 1,3-butadiene, isopentane, and 1-butene were the top five species in terms of OFP. Scientific and precise control policy were proposed, involving four aspects: environmental access, emission standards, classification and management, and research on source substitution. We believe our study will provide an important reference for the systematic characterization and control policy of VOC emissions from other industries.

From the HOMEChem frying pan to the outdoor atmosphere: chemical composition, volatility distributions and fate of cooking aerosol

Cooking organic aerosol (COA) is frequently observed in urban field studies. Like other forms of organic aerosol, cooking emissions partition between gas and particle phases; a quantitative understanding of the species volatility governing this partitioning is essential to model the transport and fate of COA. However, few cooking-specific volatility measurements are available, and COA is often assumed to be semi-volatile. We use measurements from a thermodenuder coupled to an aerosol chemical speciation monitor during the HOMEChem study to investigate the chemical components and volatility of near-source COA. We found that fresh emissions of COA have three chemical components: a biomass burning-like component (COA_BBOA), a lower volatility component associated with cooking oil (COA_oil-2), and a higher volatility component associated with cooking oil (COA_oil-1). We provide characteristic mass spectra and volatility profiles for these components. We develop a model to describe the partitioning of these emissions as they dilute through the house and outdoor atmosphere. We show that the total emissions from cooking can be misclassified in air quality studies that use semi-volatile emissions as a proxy for cooking aerosol, due to the presence of substantial mass in lower volatility bins of COA not generally represented in models. Primary emissions of COA can thus be not only primary sources of urban aerosol pollution, but also sources of semi-volatile organic compounds that undergo secondary chemistry in the atmosphere and contribute to ozone formation and secondary organic aerosol.

Evaluating major anthropogenic VOC emission sources in densely populated Vietnamese cities

Volatile organic compounds (VOCs) play an important role in urban air pollution, both as primary pollutants and through their contribution to the formation of secondary pollutants, such as tropospheric ozone and secondary organic aerosols. In this study, more than 30 VOC species were continuously monitored in the two most populous cities in Vietnam, namely Ho Chi Minh City (HCMC, September-October 2018 and March 2019) and Hanoi (March 2019). In parallel with ambient VOC sampling, grab sampling was used to target the most prevalent regional-specific emission sources and estimate their emission factors (EFs). Emission ratios (ERs) obtained from ambient sampling were compared between Vietnamese cities and other cities across the globe. No significant differences were observed between HCMC and Hanoi, suggesting the presence of similar sources. Moreover, a good global agreement was obtained in the spatial comparison within a factor of 2, with greater ER for aromatics and pentanes obtained in the Vietnamese cities. The detailed analysis of sources included the evaluation of EF from passenger cars, buses, trucks, motorcycles, 3-wheeled motorcycles, waste burning, and coal-burning emissions. Our comparisons between ambient and near-source concentration profiles show that road transport sources are the main contributors to VOC concentrations in Vietnamese cities. VOC emissions were calculated from measured EF and consumption data available in Hanoi and compared with those estimated by a global emission inventory (EDGAR v4.3.2). The total VOC emissions from the road transport sector estimated by the inventory do not agree with those calculated from our observations which showed higher total emissions by a factor of 3. Furthermore, the inventory misrepresented the VOCs speciation, mainly for isoprene, monoterpenes, aromatics, and oxygenated compounds. Accounting for these differences in regional air quality models would lead to improved predictions of their impacts and help to prioritise pollution reduction strategies in the region.

Characterization of different contaminants and current knowledge for defining chemical mixtures in human milk: A review

Hundreds of xenobiotics, with very diverse origins, have been detected in human milk, including contaminants of emerging concern, personal care products and other current-use substances reflecting lifestyle. The routes of exposure to these chemicals include dermal absorption, ingestion and inhalation. Specific families of chemicals are dominant among human milk monitoring studies (e.g., organochlorine pesticides, bisphenol A, dioxins), even though other understudied families may be equally toxicologically relevant (e.g., food-processing chemicals, current-use plasticizers and flame retardants, mycotoxins). Importantly, the lack of reliable human milk monitoring data for some individual chemicals and, especially, for complex mixtures, is a major factor hindering risk assessment. Non-targeted screening can be used as an effective tool to identify unknown contaminants of concern in human milk. This approach, in combination with novel methods to conduct risk assessments on the chemical mixtures detected in human milk, will assist in elucidating exposures that may have adverse effects on the development of breastfeeding infants.

Low-Temperature Toluene Oxidation on Fe-Containing Modified SBA-15 Materials

Transition metals as catalysts for total VOC oxidation at low temperatures (150-280 °C) are a big challenge nowadays. Therefore, iron-modified SBA-15, AlSBA-15, and ZrSBA-15 materials with 0.5 to 5.0 wt.% Fe loading were prepared and tested for toluene oxidation. It was found that increasing Fe loading significantly improved the rate of oxidation and lowered the temperature of achieving 100% removal of toluene from above 500 °C for the supports (AlSBA-15 and ZrSBA-15) to below 400 °C for 5FeZrSBA-15. The formation of finely dispersed iron oxide active sites with a particle size less than 5 nm was observed on all the SBA-15, AlSBA-15, and ZrSBA-15 supports. It was found that the surface properties of the mesoporous support due to the addition of Al or Zr predetermined the type of formed iron oxide species and their localization on the support surface. Fe-containing SBA-15 and AlSBA-15 showed activity in total toluene oxidation at higher temperatures (280-450 °C). However, 5 wt. % Fe-containing ZrSBA-15 showed excellent activity in the total oxidation of toluene as a model VOC at lower temperatures (150-380 °C) due to the synergistic effect of Fe-Zr and the presence of accessible and stable Fe²⁺/Fe³⁺ active sites.

Multiple Impacts of Aerosols on O3 Production Are Largely Compensated: A Case Study Shenzhen, China

Tropospheric ozone (O₃) is a harmful gas compound to humans and vegetation, and it also serves as a climate change forcer. O₃ is formed in the reactions of nitrogen oxides and volatile organic compounds (VOCs) with light. In this study, an O₃ pollution episode encountered in Shenzhen, South China in 2018 was investigated to illustrate the influence of aerosols on local O₃ production. We used a box model with comprehensive heterogeneous mechanisms and empirical prediction of photolysis rates to reproduce the O₃ episode. Results demonstrate that the aerosol light extinction and NO₂ heterogeneous reactions showed comparable influence but opposite signs on the O₃ production. Hence, the influence of aerosols from different processes is largely counteracted. Sensitivity tests suggest that O₃ production increases with further reduction in aerosols in this study, while the continued NO_x reduction finally shifts O₃ production to an NO_x-limited regime with respect to traditional O₃-NO_x-VOC sensitivity. Our results shed light on the role of NO_x reduction on O₃ production and highlight further mitigation in NO_x not only limiting the production of O₃ but also helping to ease particulate nitrate, as a path for cocontrol of O₃ and fine particle pollution.

Quantifying diurnal changes in NO2 due to COVID-19 stay-at-home orders in New York City

Introduction

Policy responses to the COVID-19 pandemic, such as the NY on Pause stay-at-home order (March 22 - June 8, 2020), substantially reduced traffic and traffic-related air pollution (TRAP) in New York City (NYC). We evaluated the magnitude of TRAP decreases and examined the role of modifying factors such as weekend/weekday, road proximity, location, and time-of-day.

Methods

Hourly nitrogen dioxide (NO₂) concentrations from January 1, 2018 through June 8, 2020 were obtained from the Environmental Protection Agency's Air Quality System for all six hourly monitors in the NYC area. We used an interrupted time series design to determine the impact of NY on Pause on NO₂ concentrations, using a mixed effects model with random intercepts for monitor location, adjusted for meteorology and long-term trends. We evaluated effect modification through stratification.

Results

NO₂ concentrations decreased during NY on Pause by 19% (-3.2 ppb, 95% confidence interval [CI]: -3.5, -3.0), on average, compared to pre-Pause time trends. We found no evidence for modification by weekend/weekday, but greater decreases in NO₂ at non-roadside monitors and weak evidence for modification by location. For time-of-day, we found the largest decreases for 5 am (27%, -4.5 ppb, 95% CI: -5.7, -3.3) through 7 am (24%, -4.0 ppb, 95% CI: -5.2, -2.8), followed by 6 pm and 7 pm (22%, -3.7 ppb, 95% CI: -4.8, -2.6 and 22%, -4.8, -2.5, respectively), while the smallest decreases occurred at 11 pm and 1 am (both: 11%, -1.9 ppb, 95% CI: -3.1, -0.7).

Conclusion

NY on Pause's impact on TRAP varied greatly diurnally. Decreases during early morning and evening time periods are likely due to decreases in traffic. Our results may be useful for planning traffic policies that vary by time of day, such as congestion tolling policies.

Investigating Changes in Ozone Formation Chemistry during Summertime Pollution Events over the Northeastern United States

Understanding the local-scale spatial and temporal variability of ozone formation is crucial for effective mitigation. We combine tropospheric vertical column densities (VCD_Trop) of formaldehyde (HCHO) and nitrogen dioxide (NO₂), referred to as HCHO-VCD_Trop and NO₂-VCD_Trop, retrieved from airborne remote sensing and the TROPOspheric Monitoring Instrument (TROPOMI) with ground-based measurements to investigate changes in ozone precursors and the inferred chemical production regime on high-ozone days in May-August 2018 over two Northeast urban domains. Over New York City (NYC) and Baltimore/Washington D.C. (BAL/DC), HCHO-VCD_Trop increases across the domain, but higher NO₂-VCD_Trop occurs mainly in urban centers on ozone exceedance days (when maximum daily 8 h average (MDA8) ozone exceeds 70 ppb at any monitor in the region). The ratio of HCHO-VCD_Trop to NO₂-VCD_Trop, proposed as an indicator of the sensitivity of local surface ozone production rates to its precursors, generally increases on ozone exceedance days, implying a transition toward a more NO_x-sensitive ozone production regime that should lead to higher efficacy of NO_x controls on the highest ozone days in NYC and BAL/DC. Warmer temperatures and enhanced influence from emissions in the local boundary layer on the high-ozone days are accompanied by slower wind speeds in BAL/DC but stronger, southwesterly winds in NYC.

Ammonium-adduct chemical ionization to investigate anthropogenic oxygenated gas-phase organic compounds in urban air

Volatile chemical products (VCPs) and other non-combustion-related sources have become important for urban air quality, and bottom-up calculations report emissions of a variety of functionalized compounds that remain understudied and uncertain in emissions estimates. Using a new instrumental configuration, we present online measurements of oxygenated organic compounds in a U.S. megacity over a 10-day wintertime sampling period, when biogenic sources and photochemistry were less active. Measurements were conducted at a rooftop observatory in upper Manhattan, New York City, USA using a Vocus chemical ionization time-of-flight mass spectrometer with ammonium (NH4 +) as the reagent ion operating at 1 Hz. The range of observations spanned volatile, intermediate-volatility, and semi-volatile organic compounds with targeted analyses of ~150 ions whose likely assignments included a range of functionalized compound classes such as glycols, glycol ethers, acetates, acids, alcohols, acrylates, esters, ethanolamines, and ketones that are found in various consumer, commercial, and industrial products. Their concentrations varied as a function of wind direction with enhancements over the highly-populated areas of the Bronx, Manhattan, and parts of New Jersey, and included abundant concentrations of acetates, acrylates, ethylene glycol, and other commonly-used oxygenated compounds. The results provide top-down constraints on wintertime emissions of these oxygenated/functionalized compounds with ratios to common anthropogenic marker compounds, and comparisons of their relative abundances to two regionally-resolved emissions inventories used in urban air quality models.

Home is Where the Pipeline Ends: Characterization of Volatile Organic Compounds Present in Natural Gas at the Point of the Residential End User

The presence of volatile organic compounds (VOCs) in unprocessed natural gas (NG) is well documented; however, the degree to which VOCs are present in NG at the point of end use is largely uncharacterized. We collected 234 whole NG samples across 69 unique residential locations across the Greater Boston metropolitan area, Massachusetts. NG samples were measured for methane (CH₄), ethane (C₂H₆), and nonmethane VOC (NMVOC) content (including tentatively identified compounds) using commercially available USEPA analytical methods. Results revealed 296 unique NMVOC constituents in end use NG, of which 21 (or approximately 7%) were designated as hazardous air pollutants. Benzene (bootstrapped mean = 164 ppbv; SD = 16; 95% CI: 134-196) was detected in 95% of samples along with hexane (98% detection), toluene (94%), heptane (94%), and cyclohexane (89%), contributing to a mean total concentration of NMVOCs in distribution-grade NG of 6.0 ppmv (95% CI: 5.5-6.6). While total VOCs exhibited significant spatial variability, over twice as much temporal variability was observed, with a wintertime NG benzene concentration nearly eight-fold greater than summertime. By using previous NG leakage data, we estimated that 120-356 kg/yr of annual NG benzene emissions throughout Greater Boston are not currently accounted for in emissions inventories, along with an unaccounted-for indoor portion. NG-odorant content (tert-butyl mercaptan and isopropyl mercaptan) was used to estimate that a mean NG-CH₄ concentration of 21.3 ppmv (95% CI: 16.7-25.9) could persist undetected in ambient air given known odor detection thresholds. This implies that indoor NG leakage may be an underappreciated source of both CH₄ and associated VOCs.

Ozone Impact on Emission of Biogenic Volatile Organic Compounds in Three Tropical Tree Species From the Atlantic Forest Remnants in Southeast Brazil

Plants emit a broad number of Biogenic Volatile Organic Compounds (BVOCs) that can impact urban ozone (O₃) production. Conversely, the O₃ is a phytotoxic pollutant that causes unknown alterations in BVOC emissions from native plants. In this sense, here, we characterized the constitutive and O₃-induced BVOCs for two (2dO₃) and four (4dO₃) days of exposure (O₃ dose 80 ppb) and evaluated the O₃ response by histochemical techniques to detect programmed cell death (PCD) and hydrogen peroxide (H₂O₂) in three Brazilian native species. Croton floribundus Spreng, Astronium graveolens Jacq, and Piptadenia gonoacantha (Mart.) JF Macbr, from different groups of ecological succession (acquisitive and conservative), different carbon-saving defense strategies, and specific BVOC emissions. The three species emitted a very diverse BVOC composition: monoterpenes (MON), sesquiterpenes (SEQ), green leaf volatiles (GLV), and other compounds (OTC). C. floribundus is more acquisitive than A. graveolens. Their most representative BVOCs were methyl salicylate-MeSA (OTC), (Z) 3-hexenal, and (E)-2-hexenal (GLV), γ-elemene and (-)-β-bourbonene (SEQ) β-phellandrene and D-limonene (MON), while in A. graveolens were nonanal and decanal (OTC), and α-pinene (MON). Piptadenia gonoachanta is more conservative, and the BVOC blend was limited to MeSA (OTC), (E)-2-hexenal (GLV), and β-Phellandrene (MON). The O₃ affected BVOCs and histochemical traits of the three species in different ways. Croton floribundus was the most O₃ tolerant species and considered as an SEQ emitter. It efficiently reacted to O₃ stress after 2dO_3, verified by a high alteration of BVOC emission, the emergence of the compounds such as α-Ionone and trans-ß-Ionone, and the absence of H₂O₂ detection. On the contrary, A. graveolens, a MON-emitter, was affected by 2dO₃ and 4dO₃, showing increasing emissions of α-pinene and β-myrcene, (MON), γ-muurolene and β-cadinene (SEQ) and H₂O₂ accumulation. Piptadenia gonoachanta was the most sensitive and did not respond to BVOCs emission, but PCD and H₂O₂ were highly evidenced. Our results indicate that the BVOC blend emission, combined with histochemical observations, is a powerful tool to confirm the species' tolerance to O₃. Furthermore, our findings suggest that BVOC emission is a trade-off associated with different resource strategies of species indicated by the changes in the quality and quantity of BVOC emission for each species.