Multiwalled carbon nanotubes in alfalfa and wheat: toxicology and uptake

Carbohydrate-Derived Superhydrophilic Carbon Aerogels and Their Effects on Seedling Growth of Triticum aestivum

Synthesis methods of carbon nanomaterials have been developed vigorously in recent years, among which a simple, green, and mature approach is of more research significance. Carbon nanomaterials have depicted an impact on the growth and development of plants. In this study, a new type of carbon nanomaterial, superhydrophilic carbon aerogel (CA), was synthesized via a hydrothermal process using carbohydrates and water-soluble polymers as raw materials. Characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, powder X-ray diffraction, and N2 adsorption analysis, the exemplified CA presented to have porous three-dimensional network structure composed of individual particles with diameters of 25 nm, with reactive surface, single composition, high specific surface area (89.94 m2·g-1), and wide range of density variation. The 9 mg·mL-1 CA suspension had a significant positive effect on the root growth of wheat seedlings, with promoted root elongation (about 67.17% longer) and root diameter (about 28.95% thicker) compared with those of the control group. The cytological results suggested that CA treatment triggered the propagation of meristematic cells, and the increased number of meristematic cells (65.79% more than the control group) led to enhanced root growth by upregulated expression of related phytohormone genes in wheat seedlings.

Phytogenic nanoparticles: synthesis, characterization, and their roles in physiology and biochemistry of plants

Researchers are swarming to nanotechnology because of its potentially game-changing applications in medicine, pharmaceuticals, and agriculture. This fast-growing, cutting-edge technology is trying different approaches for synthesizing nanoparticles of specific sizes and shapes. Nanoparticles (NPs) have been successfully synthesized using physical and chemical processes; there is an urgent demand to establish environmentally acceptable and sustainable ways for their synthesis. The green approach of nanoparticle synthesis has emerged as a simple, economical, sustainable, and eco-friendly method. In particular, phytoassisted plant extract synthesis is easy, reliable, and expeditious. Diverse phytochemicals present in the extract of various plant organs such as root, leaf, and flower are used as a source of reducing as well as stabilizing agents during production. Green synthesis is based on principles like prevention/minimization of waste, reduction of derivatives/pollution, and the use of safer (or non-toxic) solvent/auxiliaries as well as renewable feedstock. Being free of harsh operating conditions (high temperature and pressure), hazardous chemicals and the addition of external stabilizing or capping agents makes the nanoparticles produced using green synthesis methods particularly desirable. Different metallic nanomaterials are produced using phytoassisted synthesis methods, such as silver, zinc, gold, copper, titanium, magnesium, and silicon. Due to significant differences in physical and chemical properties between nanoparticles and their micro/macro counterparts, their characterization becomes essential. Various microscopic and spectroscopic techniques have been employed for conformational details of nanoparticles, like shape, size, dispersity, homogeneity, surface structure, and inter-particle interactions. UV-visible spectroscopy is used to examine the optical properties of NPs in solution. XRD analysis confirms the purity and phase of NPs and provides information about crystal size and symmetry. AFM, SEM, and TEM are employed for analyzing the morphological structure and particle size of NPs. The nature and kind of functional groups or bioactive compounds that might account for the reduction and stabilization of NPs are detected by FTIR analysis. The elemental composition of synthesized NPs is determined using EDS analysis. Nanoparticles synthesized by green methods have broad applications and serve as antibacterial and antifungal agents. Various metal and metal oxide NPs such as Silver (Ag), copper (Cu), gold (Au), silicon dioxide (SiO2), zinc oxide (ZnO), titanium dioxide (TiO2), copper oxide (CuO), etc. have been proven to have a positive effect on plant growth and development. They play a potentially important role in the germination of seeds, plant growth, flowering, photosynthesis, and plant yield. The present review highlights the pathways of phytosynthesis of nanoparticles, various techniques used for their characterization, and their possible roles in the physiology of plants.

Use of titanium dioxide doped multi-wall carbon nanotubes as promoter for the growth, biochemical indices of Sesamum indicum L. under heat stress conditions

The behavior of multi-walled carbon nanotubes (MWCNTs) and titanium dioxide nanoparticles (TiO2 NPs) as plant growth enhancers was still unclear; however, in this study, the effects of MWCNTs, TiO2NPs, 5%TiO2@MWCNTs, 10%TiO2@MWCNTs and 15%TiO2@MWCNTs on physical and biochemical contents in Sesamum indicum L. under heat stress conditions were studied. The content of malondialdehyde (MDA) and hydrogen peroxide (H2O2) concentrations were reduced by the spraying MWCNTs and TiO2 NPs on plants. The hydrogen peroxide (H2O2) content was reduced by 49.02% in plants treated with 15%TiO2@MWCNTs while 42.14% reduction was found in plants treated with 10%TiO2@MWCNTs. The proportion of oil and the peroxidase enzyme activity in plants treated with 15%TiO2@MWCNTs were increased by 48.99%, for the oil content, and 2.39 times for POD activity respected to the stressed plants. The proportion of unsaturated fatty acids increased in plants treated with 15%TiO2@MWCNTs, 10%TiO2@MWCNTs and TiO2 NPs by 2.7, 2.52, and 2.09 times, respectively, greater than the control of the Shandweel-3 variety. Finally, plants treated with 15%TiO2@MWCNTs showed increases in seed yield and weight 1000-seeds by 4.42 and 1.67 times, respectively. These findings suggest that TiO2@MWCNTs more effective than separated MWCNTs and TiO2 NPs in improve plant growth. In addition, the cultivar Shandweel-3 showed an improvement in growth indicators more than the Giza-32 cultivar.

Seed Priming with Fullerol Improves Seed Germination, Seedling Growth and Antioxidant Enzyme System of Two Winter Wheat Cultivars under Drought Stress

The application of carbon-based nanomaterials (CBNMs) in plant science and agriculture is a very recent development. Many studies have been conducted to understand the interactions between CBNMs and plant responses, but how fullerol regulates wheat subjected to drought stress is still unclear. In this study, seeds of two wheat cultivars (CW131 and BM1) were pre-treated with different concentrations of fullerol to investigate seed germination and drought tolerance. Our results indicate that the application of fullerol at certain concentrations (25-200 mg L^-1) significantly promoted seed germination in two wheat cultivars under drought stress; the most significant effective concentration was 50 mg L^-1, which increased the final germination percentage by 13.7% and 9.7% compared to drought stress alone, respectively. Wheat plants exposed to drought stress induced a significant decrease in plant height and root growth, while reactive oxygen species (ROS) and malondialdehyde (MDA) contents increased significantly. Interestingly, wheat seedlings of both cultivars grown from 50 and 100 mg L^-1 fullerol-treated seeds were promoted in seedling growth under water stress, which was associated with lower ROS and MDA contents, as well as higher antioxidant enzyme activities. In addition, modern cultivars (CW131) had better drought adaptation than old cultivars (BM1) did, while the effect of fullerol on wheat had no significant difference between the two cultivars. The study demonstrated the possibility of improving seed germination, seedling growth and antioxidant enzyme activities by using appropriate concentrations of fullerol under drought stress. The results are significant for understanding the application of fullerol in agriculture under stressful conditions.

Activation of persulfate by vanadium oxide modified carbon nanotube for 17β-estradiol degradation in soil: Mechanism, application and ecotoxicity assessment

Steroid hormones in the environment have attracted public attention because of their high endocrine-disrupting activity even at rather low exposure level. Excessive hormones in the soil from the pollutant discharge of intensive farming would pose a potential threat to the ecology and the human health. Vanadium oxide modified carbon nanotube (VO_X-CNT) was synthesized and applied as persulfate (PDS) activator to reduce17β-estrogen (17β-E2) in soil. 86.06 % 17β-E2 could be degraded within 12 h. Process of materials exchange during oxidation was interfered by soil, resulting in insufficient degradation of 17β-E2, but the active species involved in 17β-E2 degradation would also be enriched by it. 17β-E2 was adsorbed on the VO_X-CNT surface and directly degraded mainly by the active species generated on the catalyst surface, and ^•OH dominated the degradation of 17β-E2 in VO_X-CNT/PDS system. CO, defective sites and vanadium oxides on the surface of VO_X-CNT contributed to the generation of activate species. Oxidizer dosage, catalyst dosage, water-soil ratio and soil properties would affect the degradation of 17β-E2. The ecotoxicological impact on soil caused by VO_X-CNT/PDS was acceptable, and would be weakened with time. Additionally, a rapid decrease in the concentration of 17β-E2 and the promotion of maize growth were observed with VO_X-CNT/PDS in situ pilot-scale remediation. Those results reveal that VO_X-CNT/PDS is a potential technology to remove excessive steroid hormone from soil around large-scale livestock and poultry farms.

Nontargeted metabolomic analysis to unravel alleviation mechanisms of carbon nanotubes on inhibition of alfalfa growth under pyrene stress

Carbon nanotubes have displayed great potential in enhancing phytoremediation of PAHs polluted soils. However, the response of plants to the coexistence of carbon nanotubes and PAHs and the associated influencing mechanisms remain largely unknown. Here, the effect of carbon nanotubes on alfalfa growth and pyrene uptake under exposure to pyrene was evaluated through sand culture experiment and gas chromatography time-of-flight mass spectrometer (GC-TOF-MS) based metabolomics. Results showed that pyrene at 10 mg kg^-1 obviously reduced the shoot fresh weight of alfalfa by 18.3 %. Multiwall carbon nanotubes (MWCNTs) at 25 and 50 mg kg^-1 significantly enhanced the shoot fresh weight in a dose-dependent manner, nearly by 80 % at 50 mg kg^-1. Pyrene was mainly accumulated in alfalfa roots, in which the concentration was 35 times as much as that in shoots. MWCNTs greatly enhanced the accumulation of pyrene in alfalfa roots, almost by two times at 50 mg kg^-1, while decreased pyrene concentration in shoots, from 0.11 mg kg^-1 to 0.044 mg kg^-1 at MWCNTs concentration of 50 mg kg^-1. Metabolomics data revealed that pyrene at 10 mg kg^-1 trigged significant metabolic changes in alfalfa root exudates, downregulating 27 metabolites. MWCNTs generated an increase in the contents of some downregulated metabolites caused by pyrene stress, which were restored to the original level or even higher, mainly including organic acids and amino acids. MWNCTs significantly enriched some metabolic pathways positively correlated with shoot growth and pyrene accumulation in shoots under exposure to pyrene, including TCA cycle, glyoxylate and dicarboxylate metabolism, cysteine and methione metabolism as well as alanine, aspartate and glutamate metabolism. This work highlights the regulation effect of MWCNTs on the metabolism of root exudates, which are helpful for alfalfa to alleviate the stress from pyrene contamination.

Seed Priming with Carbon Nanomaterials Improves the Bioactive Compounds of Tomato Plants under Saline Stress

The consumption of food with a high content of bioactive compounds is correlated with the prevention of chronic degenerative diseases. Tomato is a food with exceptional nutraceutical value; however, saline stress severely affects the yield, the quality of fruits, and the agricultural productivity of this crop. Recent studies have shown that seed priming can mitigate or alleviate the negative effects caused by this type of stress. However, the use of carbon nanomaterials (CNMs) in this technique has not been tested for this purpose. In the present study, the effects of tomato seed priming with carbon nanotubes (CNTs) and graphene (GP) (50, 250, and 500 mg L−1) and two controls (not sonicated and sonicated) were evaluated based on the content of photosynthetic pigments in the leaves; the physicochemical parameters of the fruits; and the presence of enzymatic and non-enzymatic antioxidant compounds, carotenoids, and stress biomarkers such as hydrogen peroxide (H2O2) and malondialdehyde (MDA) in the leaves and fruits of tomato plants without saline stress and with saline stress (50 mM NaCl). The results show that saline stress in combination with CNTs and GP increased the content of chlorophylls (9.1–21.7%), ascorbic acid (19.5%), glutathione (≈13%), proteins (9.9–11.9%), and phenols (14.2%) on the leaves. The addition of CNTs and GP increased the activity of enzymes (CAT, APX, GPX, and PAL). Likewise, there was also a slight increase in the content of H2O2 (by 20.5%) and MDA (3.7%) in the leaves. Salinity affected the quality of tomato fruits. The physico-chemical parameters and bioactive compounds in both the stressed and non-stressed tomato plants were modified with the addition of CNTs and GP. Higher contents of total soluble solids (25.9%), phenols (up to 144.85%), flavonoids (up to 37.63%), ascorbic acid (≈28%), and lycopene (12.4–36.2%) were observed. The addition of carbon nanomaterials by seed priming in tomato plants subjected to saline stress modifies the content of bioactive compounds in tomato fruits and improves the antioxidant defense system, suggesting possible protection of the plant from the negative impacts of stress by salinity. However, analysis of the mechanism of action of CNMs through seed priming, in greater depth is suggested, perhaps with the use of omics sciences.

Engineering plants with carbon nanotubes: a sustainable agriculture approach

Sustainable agriculture is an important conception to meet the growing food demand of the global population. The increased need for adequate and safe food, as well as the ongoing ecological destruction associated with conventional agriculture practices are key global challenges. Nanomaterials are being developed in the agriculture sector to improve the growth and protection of crops. Among the various engineered nanomaterials, carbon nanotubes (CNTs) are one of the most promising carbon-based nanomaterials owing to their attractive physiochemical properties such as small size, high surface area, and superior mechanical and thermal strength, offering better opportunities for agriculture sector applications. This review provides basic information about CNTs, including their history; classification; and electrical, thermal, and mechanical properties, with a focus on their applications in the agriculture field. Furthermore, the mechanisms of the uptake and translocation of CNTs in plants and their defense mechanisms against environmental stresses are discussed. Finally, the major shortcomings, threats, and challenges of CNTs are assessed to provide a broad and clear view of the potential and future directions for CNT-based agriculture applications to achieve the goal of sustainability.

Cyto-Genotoxic Effect Causing Potential of Polystyrene Micro-Plastics in Terrestrial Plants

The polystyrene micro-plastics (Ps-MPs) is one of the leading pollutants found in both aquatic and terrestrial ecosystems. While most of the studies on the morphology and cyto-toxicity of MPs have been based on aquatic organisms, their effects on terrestrial plants are still scarcely known. The present study was an attempt to measure the effect of different sizes (80, 100, 200, 500, 1000, 2000, 4000, and 8000 nm) and concentrations (100 and 400 mg/L) of Ps-MPs on the root length and chromosomes of root tip cells of Allium cepa using A. cepa root chromosomal aberration assay. Large size Ps-MPs (4000 and 8000 nm) showed the highest reduction in A. cepa root length; however, the differences were not significant (at p ≤ 0.05), with respect to negative control (Milli-Q water). The mitotic index showed both significant size- and concentration-dependent decreases, being the lowest (12.06%) in 100 nm at 100 mg/L concentration, with respect to the control (25.05%). The chromosomal abnormality index (CAI) and nuclear abnormality index (NAI) showed significant decreases, with respect to negative control. In addition, the induction of micro-nucleated cells was also observed in Allium root tip cells, when treated with MPs of all sizes, which can predict direct DNA damage to the plant cells. Hence, we conclude that most of the MP sizes caused cyto-toxic and nuclear damage by adversely impacting the spindle formation and induction of micro-nucleated cells in Allium cepa root tip cells. To the best of our knowledge, this is the first study that showed the effect of considerable size range of Ps-MP sizes on the root length and cell division in plants.

Interactive effects of metals and carbon nanotubes in a microcosm agrosystem

Agricultural soils are exposed to multiple contaminants through the use of agrochemicals or sewage sludge, introducing metals, nanomaterials and others. Among nanomaterials, carbon nanotubes (CNTs) are known for their large surface area and adsorption capabilities, possibly modifying other element behavior. However, to date, very little is known about the impacts of such interactions in agrosystems. In this study, we aimed at understanding the transfer and toxicity of contaminants (Cd, Pb, Zn and CNTs) in microcosms including native soil bacteria, earthworms and lettuce. After a 6 week exposure, no effect of the addition of CNTs to metal contaminated soils was detected on bacterial concentration or earthworm growth. However, in lettuce, an interactive effect between CNTs and metals was highlighted: in the soil containing the highest metal concentrations the addition of 0.1 mg kg^-1 CNTs led to a biomass loss (-22%) and a flavonoid concentration increase (+27%). In parallel, the addition of CNTs led to differential impacts on elemental uptake in lettuce leaves possibly related to the soil organic matter content. For earthworms, the addition of 10 mg kg^-1 CNTs resulted in an increased body elemental transfer in the soil with the higher organic matter content (Pb: + 34% and Zn: + 25%).

Nanomaterials coupled with microRNAs for alleviating plant stress: a new opening towards sustainable agriculture

Plant growth and development is influenced by their continuous interaction with the environment. Their cellular machinery is geared to make rapid changes for adjusting the morphology and physiology to withstand the stressful changes in their surroundings. The present scenario of climate change has however intensified the occurrence and duration of stress and this is getting reflected in terms of yield loss. A number of breeding and molecular strategies are being adopted to enhance the performance of plants under abiotic stress conditions. In this context, the use of nanomaterials is gaining momentum. Nanotechnology is a versatile field and its application has been demonstrated in almost all the existing fields of science. In the agriculture sector, the use of nanoparticles is still limited, even though it has been found to increase germination and growth, enhance physiological and biochemical activities and impact gene expression. In this review, we have summarized the use and role of nanomaterial and small non-coding RNAs in crop improvement while highlighting the potential of nanomaterial assisted eco-friendly delivery of small non-coding RNAs as an innovative strategy for mitigating the effect of abiotic stress.

Combined effects of carbon nanotubes and cadmium on the photosynthetic capacity and antioxidant response of wheat seedlings

A detailed study of nanomaterials has revealed their broad application prospects. However, the presence of carbon nanotubes (CNTs) in the environment has been increasing and has aroused concerns regarding their toxicity to crops when combined with heavy metals. In the present study, the effects of Cd on the photosynthetic capacity and antioxidant activity of wheat seedlings in the presence of single-walled CNTs (SW) and multi-walled CNTs (MW) were investigated. Our results indicated that SW (5-40 mg L^-1) and MW (10-40 mg L^-1) significantly increased the oxidative stress response of wheat seedlings to Cd. Compared with Cd alone, CNTs combined with Cd decreased net photosynthetic rate, stomatal conductance, transpiration rate, primary maximum photochemical efficiency of photosystem II, actual quantum yield, photosynthetic electron transport rate, root canal protein, and ribulose-1,5-bisphosphate carboxylase/oxygenase content. Moreover, combined treatments increased the content of superoxide anion, superoxide dismutase, guaiacol peroxidase, cytochrome, and malondialdehyde in wheat seedlings. Moreover, membrane lipid peroxidation was aggravated, causing serious damage to the wheat membrane system. In addition, the toxicity of the SW treatment and the combined treatment with SW and Cd was higher than that of the MW treatment.

Innovations in nanoscience for the sustainable development of food and agriculture with implications on health and environment

A rapid increase in world population is leading to the rise in global demand of food and agriculture (agri) products. Nanotechnology and its applications have emerged as one of the most pioneering and promising technology for transforming conventional food and agri industries, with the aim of sustainable farming, improving the food security, quality and safety which could revolutionize the food and agri industries. Current developments in nanotechnology have led to the new paths progressively and bringing the radical changes the way food is perceived throughout the farming, transportation, processing, packaging, storage, monitoring and consumption. This review brings the current updates on novel nanomaterials in food and agri industries. Emphasis is given on the importance of nanotechnological applications, offering complete food solutions from farm to fork; including nutraceutical and functional foods, improving bioavailability, efficiency, nutritional status, nano-additives, food texture, color, taste and packaging. Agricultural sector also witnessed several nano-based products, such as nano-fertilizer, nano-pesticide, nano growth promoters and many more for the development of sustainable farming and crop improvement. Despite of numerous advantages of nanotechnology, there are still toxicity challenges, safety concerns, which needs to be addressed and demands transformations in regulatory policies. Rapid development is projected to transform several foods and agri sectors, with rapid increase in market stake and investment. Government agencies, private research centers as well as academicians are also coming together to explore the benefits of nanotechnology to improve food scarcity in the coming years.

A Novel Mechanism Underlying Multi-walled Carbon Nanotube-Triggered Tomato Lateral Root Formation: the Involvement of Nitric Oxide

Abundant studies revealed that multi-walled carbon nanotubes (MWCNTs) are toxic to plants. However, whether or how MWCNTs influence lateral root (LR) formation, which is an important component of the adaptability of the root system to various environmental cues, remains controversial. In this report, we found that MWCNTs could enter into tomato seedling roots. The administration with MWCNTs promoted tomato LR formation in an approximately dose-dependent fashion. Endogenous nitric oxide (NO) production was triggered by MWCNTs, confirmed by Greiss reagent method, electron paramagnetic resonance (EPR), and laser scanning confocal microscopy (LSCM), together with the scavenger of NO. A cause-effect relationship exists between MWCNTs and NO in the induction of LR development, since MWCNT-triggered NO synthesis and LR formation were obviously blocked by the removal of endogenous NO with its scavenger. The activity of NO generating enzyme nitrate reductase (NR) was increased in response to MWCNTs. Tungstate inhibition of NR not only impaired NO production, but also abolished LR formation triggered by MWCNTs. The addition of NG-nitro-L-arginine methyl ester (L-NAME), an inhibitor of mammalian nitric oxide synthase (NOS)-like enzyme, failed to influence LR formation. Collectively, we proposed that NO might act as a downstream signaling molecule in MWCNT control of LR development, at least partially via NR.

Effects of carbon nanotubes on growth of wheat seedlings and Cd uptake

Carbon nanotubes (CNTs) have been widely used in many scientific fields including plant sciences due to their unique physical and chemical properties. However, little is known about the toxic effects of CNTs combined with cadmium (Cd) on wheat. The aim of this study was to investigate the effects of single-walled carbon nanotubes (SW) and multi-walled carbon nanotubes (MW) on the phytotoxicity of Cd in wheat. A hydroponic culture was carried out to study wheat seedling growth in six treatments, namely Cd only (Cd); MW only (MW); SW only (SW); SW combined with Cd (SWCd); MW combined with Cd (MWCd); and a control (neither Cd nor carbon nanotubes). Compared with the Cd, SW/MW alone, CNTsCd treatments induced a reduction in total root length, root surface area, average root diameter, number of root hairs, and the dry weight of shoots and roots, which indicated that wheat growth and development was significantly inhibited. In addition, an obvious decrease in tubulins in the roots was observed. However, SW/MWCd induced a significant increase in glutathione S-transferase and cyochrome P450 in the shoots and roots, which indicated that the defense ability of wheat seedlings had improved, thus alleviating Cd stress. Moreover, Cd content increased significantly in shoot and root tissues with an increase in SW/MW content, compared to the Cd treatment. According to the transmission electron microscopy, CNTs alone destroyed the cell structure, and this devastating phenomenon was deepened after combining Cd and CNTs due to CNTs carrying Cd to attack cells. Compared with MW, SW had a greater effect on wheat seedlings. To conclude, CNTs increase the toxicity of Cd to wheat seedlings. These results are significant as they evaluate indirect phytotoxicity of CNTs for adsorbing heavy metals and plant growth regulators. In view of the widespread exposure of agricultural crops to Cd, the nanotoxicity of CNTs should be seriously considered in relation to food security in the future.

Discerning the mechanism of the multiwalled carbon nanotubes effect on root cell water and nutrient transport

Multiwalled carbon nanotubes (MWCNTs) are tubular carbon structures that are able to enter cells through holes in the plasma membrane and produce changes in gene expression. In this work, we compared the functionality of carbon nanotubes with the electroporation that perforates membranes, in Brassica oleracea var. Italica (broccoli) root protoplasts. For this, we combined those treatments with control conditions and abiotic stress (salinity) in order to elucidate if the response is related to conditions optimal for the plant. The measurement of the osmotic water permeability (Pf), mineral concentrations and expression levels of aquaporins (PIP1s and PIP2s) revealed that the physiological action of the nanotubes was similar to that achieved with electroporation for both Pf and the concentrations of nutrients in the protoplasts. On the other hand, PIP1s and PIP2s expression was increased in the protoplasts receiving the control plus MWCNTs treatment but not in those treated with electroporation. This opens new and interesting lines, as it shows that nanotubes are able to modulate the expression of aquaporins.

Target-specific gene delivery in plant systems and their expression: Insights into recent developments

In order to improve crop plants in terms of their yield, drought resistance, pest resistance, nutritional value, etc., modern agriculture has relied upon plant genetic engineering. Since the advent of recombinant DNA technology, several tools have been used for genetic transformations in plants such as Agrobacterium tumefaciens, virus-mediated gene transfer, direct gene transfer systems such as electroporation, particle gun, microinjection and chemical methods. All these traditional methods lack specificity and the transgenes are integrated at random sites in the plant DNA. Recently novel techniques for gene targeting have evolved such as engineered nucleases such as Zinc Finger Nucleases, Transcription Activator like effector nucleases, Clustered regular interspaced short palindromic repeats. Other advances include improvement in tools for delivery of gene editing components which include carrier proteins, and carbon nanotubes. The present review focuses on the latest techniques for target specific gene delivery in plants, their expression and future directions in plant biotechnology.

Advances in nanomaterials as novel elicitors of pharmacologically active plant specialized metabolites: current status and future outlooks

During the last few decades major advances have shed light on nanotechnology. Nanomaterials have been widely used in various fields such as medicine, energy, cosmetics, electronics, biotechnology and pharmaceuticals. Owing to their unique physicochemical characteristics and nanoscale structures, nanoparticles (NPs) have the capacity to enter into plant cells and interact with intracellular organelles and various metabolites. The effects of NPs on plant growth, development, physiology and biochemistry have been reported, but their impact on plant specialized metabolism (aka as secondary metabolism) still remains obscure. In reaction to environmental stress and elicitors, a common response in plants results in the production or activation of different types of specialized metabolites (e.g., alkaloids, terpenoids, phenolics and flavonoids). These plant specialized metabolites (SMs) are important for plant adaptation to an adverse environment, but also a huge number of them are biologically active and used in various commercially-valued products (pharmacy, cosmetic, agriculture, food/feed). Due to their wide array of applications, SMs have attracted much attention to explore and develop new strategies to enhance their production in plants. In this context, NPs emerged as a novel class of effective elicitors to enhance the production of various plant SMs. In recent years, many reports have been published regarding the elicitation of SMs by different types of NPs. However, in order to achieve an enhanced and sustainable production of these SMs, in-depth studies are required to figure out the most suitable NP in terms of type, size and/or effective concentration, along with a more complete understanding about their uptake, translocation, internalization and elicitation mechanisms. Herein, we are presenting a comprehensive and critical account of the plant SMs elicitation capacities of the three main classes of nanomaterials (i.e., metallic NPs (MNPs), metal oxide NPs (MONPs) and carbon related nanomaterials). Their different proposed uptake, translocation and internalization pathways as well as elicitation mechanism along with their possible deleterious effect on plant SMs and/or phytotoxic effects are summarized. We also identified and critically discussed the current research gaps existing in this field and requiring future investigation to further improve the use of these nanomaterials for an efficient production of plant SMs.

Insights into long-term effects of amino-functionalized multi-walled carbon nanotubes (MWCNTs-NH2) on the performance, enzymatic activity and microbial community of sequencing batch reactor

Carbon nanotubes (CNTs) inevitably enter domestic sewage and industrial wastewater with the continuous increase of their production and application field. The potential effect of CNTs on biological wastewater treatment processes has raised wide concerns due to their biotoxicity. In the present study, the performance, microbial community and enzymatic activity of sequencing batch reactors (SBRs) were evaluated under 148-day exposure of amino-functionalized multi-walled CNTs (MWCNTs-NH₂) at 10 and 30 mg/L. The COD removal efficiency at 10 and 30 mg/L MWCNTs-NH₂ gradually reduced from 91.03% and 90.43% on day to 89.11% and 86.70% on day 148, respectively. The NH₄⁺-N removal efficiency at 10 and 30 mg/L MWCNTs-NH₂ gradually reduced from 98.98% and 98.46% on day 1 to 96.65% and 63.39% on day 148, respectively. Compared to 0 mg/L MWCNTs-NH₂, the oxygen-utilizing rate, ammonia-oxidizing rate, nitrite-oxidizing rate, nitrite-reducing rate and nitrate-reducing rate at 30 mg/L MWCNTs-NH₂ were decreased by 52.35%, 60.58%, 55.12%, 56.56% and 57.42% on day 148, respectively. The microbial reactive oxygen species and lactate dehydrogenase release on day 148 was increased by 59.71% and 55.28% at 30 mg/L MWCNTs-NH₂, respectively. The key microbial enzymatic activity related to nitrogen removal decreased with the increase of operation time under MWCNTs-NH₂ stress. The relative abundances of Nitrosomonas, Nitrosospira, Nitrospira and some denitrifying bacteria at 10 mg/L MWCNTs-NH₂ gradually reduced with an increment in operation time. The changes of nitrogen removal rate, microbial community and enzymatic activity of SBR were related to the time-cumulative nonlinear inhibition effect under long-term exposure.

Ecotoxicity and genotoxicity of polystyrene microplastics on higher plant Vicia faba

Nano- and microplastics have been widely spread in environmental matrices, especially in marine and terrestrial systems. In this study, higher plant Vicia faba root tips were exposed to 5 μm and 100 nm with 10, 50 and 100 mg/L polystyrene fluorescent microplastics (PS-MPs) for 48 h. Root length, weight, oxidative stress and genotoxicity of V. faba were assessed to investigate toxic effects of PS-MPs. The results showed that the biomass and catalase (CAT) enzymes activity of V. faba roots decreased under 5 μm PS-MPs whereas superoxide dismutase (SOD) and peroxidase (POD) enzymes activity significantly increased. Under the 100 nm PS-MPs exposure a significant decrease of growth was observed only at the highest concentration (100 mg/L). However, micronucleus (MN) test and antioxidative enzymes activities showed that 100 nm PS-MPs induce higher genotoxic and oxidative damage to V. faba than 5 μm PS-MPs. Furthermore, the laser confocal scanning microscopy (LCSM) demonstrated that 100 nm PS-MPs can accumulate in V. faba root and most probably block cell connections or cell wall pores for transport of nutrients. These findings provide a new insight into the toxic effects of microplastics on V. faba, and further apply to the ecological risk assessment of microplastics on higher plants.

Applications of carbon nanomaterials in the plant system: A perspective view on the pros and cons

With the remarkable development in the field of nanotechnology, carbon-based nanomaterials (CNMs) have been widely used for numerous applications in different areas of the plant system. The current understanding about the CNMs' accumulation, translocation, plant growth responses, and stress modulations in the plant system is far from complete. There have been relentless efforts by the researchers worldwide in order to acquire newer insights into the plant-CNMs interactions and the consequences. The present review intends to update the reader with the status of the impacts of the different CNMs on plant growth. Research reports from the plant biotechnologists have documented mixed effects (which are dependent on CNMs' concentration) of the CNMs' exposure on plants ranging from enhanced crop yield to acute cytotoxicity. The growth and yield pattern vary from species to species and are dependent on the dosage of the CNMs applied. Studies found an increase in vegetative growth and yield of fruit/seed at lower concentration of CNMs, but a decrease in these observables were also noted when higher concentrations of CNMs were used. In general, at lower concentrations, CNMs were found to be effective in enhancing (water uptake, water transport, seed germination, nitrogenase, photosystem and antioxidant activities), activating (water channels proteins) and promoting (nutrition absorption); all these change when concentrations are raised. All these aspects have been reviewed thoroughly in this article, with a focus on the recent updates on the role of the CNMs in augmenting or retarding plant growth. Sections have been devoted to the various features of the CNMs and their roles in inducing plant growth, phytotoxic responses of the plants and overall crop improvement. Concluding remarks have been added to propose future directions of research on the CNMs-plant interactions and also to sound a warning on the use of CNMs in agriculture.

Phytomodulatory effects of silver nanoparticles on Corchorus olitorius: Its antiphytopathogenic and hepatoprotective potentials

This study has reported the effects of biogenic silver nanoparticles (AgNPs) using cocoa pod extract on physiological tolerance indices, antioxidant activity and hepatoprotective potentials of Corchorus olitorius as well as its efficiency for controlling soil phytopathogens. C. olitorius seeds were grown in soil prepared with water (control), 0.05, 0.1, 0.15 and 0.2 mg AgNPs/g soil. C. olitorus grown with AgNPs had significantly (p < 0.05) higher free radical scavenging ability, ferric reducing ability, percentage germination, vigour indices, longer roots and shoots as well as lower moisture content over control. C. olitorius grown with AgNPs attenuated hydrogen peroxide (H₂O₂)-mediated reduction in catalase concentrations and H₂O₂-induced malondialdehyde elevations in liver. Efficiency of AgNPs to reduce soil phytopathogens (fungi and nematodes) revealed significant (p < 0.05) reduction in the incidences of soil and shoot Meloidogyne spp., Aspergillus terreus, A. niger, Fusarium spp. and Cladosporium spp. with increase in concentrations of AgNPs. More efficiently, there was complete extermination of A. niger and Fusarium spp. in the leaves of C. olitorius grown with AgNPs. Results in this study have shown the positive influence of AgNPs on C. olitorius by strengthening its resistance against fungi, and nematodes, improvement of its shelf-life, modulation of antioxidant activities and promotion of liver-detoxifying potentials.

Carboxylated multi-walled carbon nanotubes exacerbated oxidative damage in roots of Vicia faba L. seedlings under combined stress of lead and cadmium

Multi-walled carbon nanotubes (MWCNTs) and heavy metals could be absorbed and bioaccumulated by agricultural crops, implicating ecological risks. Herein, the present study investigated the ecotoxicological effects and mechanisms of individual carboxylated MWCNTs (MWCNTs-COOH) (2.5, 5.0 and 10 mg/L) and their combination with 20 µM Pb and 5 µM Cd (shortened as Pb + Cd) on roots of Vicia faba L. seedlings after 20 days of exposure. The results showed that the tested MWCNTs-COOH induced imbalance of nutrient elements, enhanced isozymes and activities of superoxide dismutase (SOD), guaiacol peroxidase (POD), catalase (CAT), and ascorbate peroxidase (APX), resulting in accumulation of carbonylated proteins, elevation of endoproteases (EPs) isozymes, and reduction of HSP70 synthesis in the roots. However, the tested MWCNTs-COOH facilitated the enrichment of Cd, Pb and Na elements, contributing to the decrease of SOD, CAT and APX activities, and the reduction of HSP70 synthesis, whereas the elevation of carbonylated proteins, EP activities and cell necrosis in the roots when Pb + Cd was combined in comparison to the treatments of MWCNTs-COOH, or Pb + Cd alone. Thus, the tested MWCNTs-COOH not only caused oxidative stress, but also aggravated the oxidative damage in the roots exposed to Pb + Cd in the culture solution.

Enhanced organic contaminants accumulation in crops: Mechanisms, interactions with engineered nanomaterials in soil

The mechanism of enhanced accumulation of organic contaminants in crops with engineered nanomaterials (ENMs) were investigated by co-exposure of crops (Ipomoea aquatica Forsk (Swamp morning-glory), Cucumis sativus L. (cucumber), Zea mays L. (corn), Spinacia oleracea L. (spinach) and Cucurbita moschata (pumpkin))to a range of chemicals (polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and polybrominated diphenyl ether (PBDE)) and ENMs (TiO₂, Ag, Al₂O₃, graphene, carbon nanotubes (CNTs)) in soil. Induced by 50 mg kg^-1 graphene co-exposure, the increase range of BDE-209, BaP, p,p'-DDE, HCB, PYR, FLU, ANT, and PHEN in the plants were increased in the range of 7.51-36.42, 5.69-32.77, 7.09-59.43, 11.61-66.73, 4.58-57.71, 5.79-109.07, 12.85-109.76, and15.57-127.75 ng g^-1, respectively. The contaminants in ENMs-spiked and control soils were separated into bioavailable, bound and residual fractions using a sequential ultrasonic extraction procedure (SUEP) to investigate the mechanism of the enhanced accumulation. The bioavailable fraction in spiked soils showed no significant difference (p > 0.05) from that in the control, while the bound fraction increased in equal proportion (p > 0.05) to the reduction in the residual fraction. These results implied that ENMs can competitively adsorbed the bound of organic contaminants from soil and co-transferred into crops, followed by a portion of the residual fraction transferred to the bound fraction to maintain the balance of different fractions in soils. The mass balance was all higher than 98.5%, indicating the portion of degraded contaminants was less than 1.5%. These findings could expand our knowledge about the organic contaminants accumulation enhancement in crops with ENMs.

Recent Developments on Nanotechnology in Agriculture: Plant Mineral Nutrition, Health, and Interactions with Soil Microflora

Plant mineral nutrition is important for obtaining higher agricultural productivity to meet the future demands of the increasing global human population. It is envisaged that nanotechnology can provide sustainable solutions by replacing traditional bulk fertilizers with their nanoparticulate counterparts possessing superior properties to overcome the current challenges of bioavailability and uptake of minerals, increasing crop yield, reducing fertilizer wastage, and protecting the environment. Recent studies have shown that nanoparticles of essential minerals and nonessential elements affect plant growth, physiology, and development, depending on their size, composition, concentration, and mode of application. The current review includes the recent findings on the positive as well as negative effects that nanofertilizers exert on plants when applied via foliar and soil routes, their effects on plant associated microorganisms, and potential for controlling agricultural pests. This review suggests future research needed for the development of sustained release nanofertilizers for enhancing food production and environmental protection.

Environmental behavior of coated NMs: Physicochemical aspects and plant interactions

The application of nanomaterials (NMs) depends on several characteristics, including polydispersity, shape, surface charge, and composition, among others. However, the specific surface properties of bare NMs induce aggregation, reducing their utilization. Thus, different surface coverages have been developed to avoid or minimize NMs aggregation, making them more stable for the envisioned applications. Carbon-based NMs are usually coated with metals, while metal-based NMs are coated with natural organic compounds including chitosan, dextran, alginate, or citric acid. On the other hand, the coating process is expected to modify the surface properties of the NMs; several coating agents add negative or positive charges to the particles, changing their interaction with the environment. In this review, we analyze the most recent literature about coating processes and the behavior of coated NMs in soil, water, and plants. In particular, the behavior of the most commercialized metal-based NMs, such as TiO₂, ZnO, CeO₂, CuO, Ag, and Au, and carbon-based NMs are discussed in this review. The available articles about the effects of coated NMs in plants are discussed. Up to now, there is no uniformity in the information to ensure that the surface coverage increases or decreases the effects of NMs in plants. While some parameters are increased, others are decreased. Since the data is contradictory in some cases, the available literature does not allow researchers to determine what concentrations benefit the plants. This review highlights current results and future perspectives on the study of the effects of coated NMs in the environment.

Multiwall carbon nanotubes modulate paraquat toxicity in Arabidopsis thaliana

Carbon nanotubes can be either toxic or beneficial to plant growth and can also modulate toxicity of organic contaminants through surface sorption. The complex interacting toxic effects of carbon nanotubes and organic contaminants in plants have received little attention in the literature to date. In this study, the toxicity of multiwall carbon nanotubes (MWCNT, 50 mg/L) and paraquat (MV, 0.82 mg/L), separately or in combination, were evaluated at the physiological and the proteomic level in Arabidopsis thaliana for 7-14 days. The results revealed that the exposure to MWCNT had no inhibitory effect on the growth of shoots and leaves. Rather, MWCNT stimulated the relative electron transport rate and the effective photochemical quantum yield of PSII value as compared to the control by around 12% and lateral root production up to nearly 4-fold as compared to the control. The protective effect of MWCNT on MV toxicity on the root surface area could be quantitatively explained by the extent of MV adsorption on MWCNT and was related to stimulation of photosynthesis, antioxidant protection and number and area of lateral roots which in turn helped nutrient assimilation. The influence of MWCNT and MV on photosynthesis and oxidative stress at the physiological level was consistent with the proteomics analysis, with various over-expressed photosynthesis-related proteins (by more than 2 folds) and various under-expressed oxidative stress related proteins (by about 2-3 folds). This study brings new insights into the interactive effects of two xenobiotics (MWCNT and MV) on the physiology of a model plant.

Uptake of Engineered Nanoparticles by Food Crops: Characterization, Mechanisms, and Implications

With the rapidly increasing demand for and use of engineered nanoparticles (NPs) in agriculture and related sectors, concerns over the risks to agricultural systems and to crop safety have been the focus of a number of investigations. Significant evidence exists for NP accumulation in soils, including potential particle transformation in the rhizosphere and within terrestrial plants, resulting in subsequent uptake by plants that can yield physiological deficits and molecular alterations that directly undermine crop quality and food safety. In this review, we document in vitro and in vivo characterization of NPs in both growth media and biological matrices; discuss NP uptake patterns, biotransformation, and the underlying mechanisms of nanotoxicity; and summarize the environmental implications of the presence of NPs in agricultural ecosystems. A clear understanding of nano-impacts, including the advantages and disadvantages, on crop plants will help to optimize the safe and sustainable application of nanotechnology in agriculture for the purposes of enhanced yield production, disease suppression, and food quality.

Exploration of nano carbons in relevance to plant systems

The potential applications of nano-carbons and biochar towards plant growth are highlighted and discussed in this perspective article.

Contrasting effects of engineered carbon nanotubes on plants: a review

Rapid surge of interest for carbon nanotube (CNT) in the last decade has made it an imperative member of nanomaterial family. Because of the distinctive physicochemical properties, CNTs are widely used in a number of scientific applications including plant sciences. This review mainly describes the role of CNT in plant sciences. Contradictory effects of CNT on plants physiology are reported. CNT can act as plant growth inducer causing enhanced plant dry biomass and root/shoot lengths. At the same time, CNT can cause negative effects on plants by forming reactive oxygen species in plant tissues, consequently leading to cell death. Enhanced seed germination with CNT is related to the water uptake process. CNT can be positioned as micro-tubes inside the plant body to enhance the water uptake efficiency. Due to its ability to act as a slow-release fertilizer and plant growth promoter, CNT is transpiring as a novel nano-carbon fertilizer in the field of agricultural sciences. On the other hand, accumulation of CNT in soil can cause deleterious effects on soil microbial diversity, composition and population. It can further modify the balance between plant-toxic metals in soil, thereby enhancing the translocation of heavy metal(loids) into the plant system. The research gaps that need careful attention have been identified in this review.

Toxicity assessment of multi-walled carbon nanotubes on Cucurbita pepo L. under well-watered and water-stressed conditions

The rapid increase in the production and application of various types of nanomaterials increases the possibility of their presence in total environment, which subsequently raises concerns about their potential threats to the first trophic level of organisms, specifically under varying environmental constraints. In this work, seeds of Cucurbita pepo L. were cultured in MS basal medium exposed to multi-walled carbon nanotubes (MWCNTs) at different concentrations (0, 125, 250, 500 and 1000μgmL^-1) under two levels of water potential, well-watered (0MPa) and water stress (-1.5MPa) induced by polyethylene glycol (PEG 6000) for 14 days. Seeds exposed to MWCNTs showed reduction in germination percentage, root and shoot length, biomass accumulation and vigor index in a dose-dependent manner. However, seedlings germinated in MWCNTs-fortified media had significantly lower germination and growth attributes than those of control under water stress conditions. This happened due to increased oxidative injury indices including hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) contents, as well as electrolyte leakage index (ELI) of tissues. The impaired morpho-physiological and biochemical processes of seedlings exposed to different concentrations of MWCNTs under both PEG-induced stress and non-stress growing conditions were consequence of changes in the activation of various cellular antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (POD). Taken together, our findings reveal that MWCNTs played negative role on seed germination and subsequent growth of C. pepo L. seedlings under both levels of water potential.

Nanoparticle silver coexposure reduces the accumulation of weathered persistent pesticides by earthworms

Although the use of engineered nanomaterials continues to increase, how these materials interact with coexisting contaminants in the environment is largely unknown. The effect of silver (Ag) in bulk, ionic, and nanoparticle (NP; bare and polyvinyl pyrrolidone-coated) forms at 3 concentrations (0 mg/kg, 500 mg/kg, 1000 mg/kg, 2000 mg/kg; ion at 69 mg/kg, 138 mg/kg, 276 mg/kg) on the accumulation of field-weathered chlordane and dichlorodiphenyldichloroethylene + metabolites (DDX) by Eisenia fetida (earthworm) was investigated. Earthworm biomass and survival were unaffected by treatment. At the 500 mg/kg and 1000 mg/kg exposure levels, NP-exposed earthworms contained significantly greater Ag (194-245%) than did the bulk exposed organisms; NP size or coating had no impact on element content. Generally, exposure to Ag of any type or at any concentration significantly reduced pesticide accumulation, although reductions for DDX (35.1%; 8.9-47.0%) were more modest than those for chlordane (79.0%; 17.4-92.9%). For DDX, the reduction in pesticide accumulation was not significantly affected by Ag type or concentration. For chlordane, the 3 NP exposures suppressed chlordane accumulation significantly more than did bulk exposure; earthworms exposed to bulk Ag contained 1170 ng/g chlordane, but levels in the NP-exposed earthworms were 279 ng/g. At the 500 mg/kg exposure, the smallest coated NPs exerted the greatest suppression in chlordane accumulation; at the 2 higher concentrations, chlordane uptake was unaffected by NP size or coating. The findings show that in exposed earthworms Ag particle size does significantly impact accumulation of the element itself, as well as that of coexisting weathered pesticides. The implications of these findings with regard to NP exposure and risk are unknown but are the topic of current investigation. Environ Toxicol Chem 2017;36:1864-1871. © 2016 SETAC.

Regulation of morphological, molecular and nutrient status in Arabidopsis thaliana seedlings in response to ZnO nanoparticles and Zn ion exposure

This study examined the mechanism of toxicity in Arabidopsis thaliana seedlings to zinc oxide nanoparticles (ZnO NPs) and zinc (Zn) ions. We subjected plants to different ZnO NPs and Zn ion concentrations (0, 20, 50, 100 and 200mg/L) and analyzed resulting morphological changes, transcriptional regulation of genes involved in Zn-homeostasis, macro- and microelement homeostasis, as well as auxin regulation. Except for 20mg/L, the fresh weight and primary root length was reduced after exposure to all other concentrations of Zn ion and ZnO NP concentrations. An increase in lateral root formation (19 and 32%) was observed after exposure to 20 and 50mg/L of Zn ions respectively; whereas 20mg/L ZnO NPs treatment triggered a 9% increase in lateral root formation. Both qualitative, using Zynpyr-1 fluorescent probe and quantitative analysis revealed Zn uptake and translocation from roots to shoots after Zn ion exposure. However, ZnO NPs-treated seedlings resulted in no root to shoot translocation and Zn accumulation was mainly located in root tips, primary-lateral root junctions and root- shoot junctions. The macronutrients viz. P (1.34mg/kg DW), K (13.29mg/kg DW), S (1.29mg/kg DW) and micronutrients Cu (0.004mg/kg DW) and Fe (0.345mg/kg DW) contents were highly decreased as a result of exposure to 200mg/L of Zn ions. Similarly, the highest reduction of P (2.30mg/kg DW), K (6.36mg/kg DW), S (2.63mg/kg DW) and Cu (0.004mg/kg DW) was observed after exposure to 200mg/L of ZnO NPs. Gene regulation studies indicated the transcriptional modulation of various genes involved in Zn, macro- and micro nutrient homeostasis as well as hormone regulation. Taken together, it was observed that the mechanism of toxicity of Zn ions and ZnO NPs were different. These findings will help to design safer strategies for the application of ZnO NPs as plant fertilizer without compromising the morphological and nutritional qualities as well as for the future phytoremediation purposes.

Influence of multiwalled carbon nanotubes and sodium dodecyl benzene sulfonate on bioaccumulation and translocation of pyrene and 1-methylpyrene in maize (Zea mays) seedlings

Influence of multiwalled carbon nanotubes with outer diameters > 50 nm (MW) and a surfactant sodium dodecyl benzene sulfonate (SDBS) on bioaccumulation and translocation of pyrene and 1-methylpyrene (1-CH₃-pyrene) in maize seedlings in single-(F1) and bi-(F2) compound systems was investigated. Pyrene concentration in shoots was detected in all treatments in F1 and F2, ranging in 10.43-60.28 ng/g and 21.46-40.21 ng/g, respectively, and its translocation factors (TFs) ranged in 0.12-0.19 and 0.07-0.16. However, no 1-CH₃-pyrene in shoots was detected from F1 and F2, indicating almost 100% suppression on its translocation from roots to shoots. SDBS at 100 mg/kg significantly enhanced pyrene bioaccumulation in roots and shoots by 43.5% and 77.4% in F1, and 21.7% in roots in F2, while showed insignificant effect on shoot concentration in F2. In contrast, SDBS at 100 mg/kg exerted no significant effect on root 1-CH₃-pyrene concentration in F1 and F2. With increasing amendment level of MW from 50 to 3000 mg/kg, both pyrene and 1-CH₃-pyrene concentrations in roots and shoots sharply decreased, indicating an increasing suppression on their bioaccumulation and translocation in plant. As for 3000 mg/kg MW + 100 mg/kg SDBS, root concentrations of pyrene and 1-CH₃-pyrene in F1 were significantly reduced by 53.4% and 100%, while shoot concentration of pyrene was not affected, generally consistent with the trend of the corresponding bioaccumulation factors (BCF_root) and TFs. As for F2 with the same treatment, root 1-CH₃-pyrene concentration declined by 68.6%, whereas pyrene bioaccumulation in roots and shoots was insignificantly affected, which were also in agreement with their BCF_root and TFs. Results of this work highlight the combined impacts of soil amendment with carbon nanotubes and surfactant on bioaccumulation and translocation of pyrene and 1-CH₃-pyrene in maize seedlings in multi-pollutant exposure systems, which is important for soil pollution control and food safety assessment.

Exposure of engineered nanomaterials to plants: Insights into the physiological and biochemical responses-A review

Recent investigations show that carbon-based and metal-based engineered nanomaterials (ENMs), components of consumer goods and agricultural products, have the potential to build up in sediments and biosolid-amended agricultural soils. In addition, reports indicate that both carbon-based and metal-based ENMs affect plants differently at the physiological, biochemical, nutritional, and genetic levels. The toxicity threshold is species-dependent and responses to ENMs are driven by a series of factors including the nanomaterial characteristics and environmental conditions. Effects on the growth, physiological and biochemical traits, production and food quality, among others, have been reported. However, a complete understanding of the dynamics of interactions between plants and ENMs is not clear enough yet. This review presents recent publications on the physiological and biochemical effects that commercial carbon-based and metal-based ENMs have in terrestrial plants. This document focuses on crop plants because of their relevance in human nutrition and health. We have summarized the mechanisms of interaction between plants and ENMs as well as identified gaps in knowledge for future investigations.

Phytotoxicity of soluble graphitic nanofibers to model plant species

Carbon nanomaterials are considered promising for applications in energy storage, catalysis, and electronics. This has motivated study of their potential environmental toxicity. Recently, a novel nanomaterial consisting of graphene oxide wrapped around a carbon nanotube (CNT) core was synthesized. The resulting soluble graphitic nanofibers were found to have superior catalytic properties, which could result in their use in fuel cells. Before this material undergoes widespread use, its environmental toxicity must be determined because of its aqueous solubility. The authors used the plant species Lolium multiflorum, Solanum lycopersicum, and Lactuca sativa to study the toxicity of the soluble graphitic nanofibers, as well as multiwalled carbon nanotubes (MWCNTs) and graphene oxide, all synthesized in-house. Soluble graphitic nanofiber-exposed plant roots and shoots showed decreased growth, with roots showing more toxicity than shoots. Decreased pH of nanomaterial solutions corresponded to insignificantly decreased root growth, suggesting that another mechanism of toxicity must exist. Agglomeration and adsorption of soluble graphitic nanofibers onto the roots likely caused the remaining toxicity because a gray layer could be seen around the surface of the root. Multiwalled carbon nanotubes showed little toxicity over the concentration range tested, whereas graphene oxide showed a unique pattern of high toxicity at both the lowest and highest concentrations tested. Overall, soluble graphitic nanofibers showed moderate toxicity between that of the more toxic graphene oxide and the relatively nontoxic MWCNTs. Environ Toxicol Chem 2016;35:2941-2947. © 2016 SETAC.

Drought Impact Is Alleviated in Sugar Beets (Beta vulgaris L.) by Foliar Application of Fullerenol Nanoparticles

Over the past few years, significant efforts have been made to decrease the effects of drought stress on plant productivity and quality. We propose that fullerenol nanoparticles (FNPs, molecular formula C60(OH)24) may help alleviate drought stress by serving as an additional intercellular water supply. Specifically, FNPs are able to penetrate plant leaf and root tissues, where they bind water in various cell compartments. This hydroscopic activity suggests that FNPs could be beneficial in plants. The aim of the present study was to analyse the influence of FNPs on sugar beet plants exposed to drought stress. Our results indicate that intracellular water metabolism can be modified by foliar application of FNPs in drought exposed plants. Drought stress induced a significant increase in the compatible osmolyte proline in both the leaves and roots of control plants, but not in FNP treated plants. These results indicate that FNPs could act as intracellular binders of water, creating an additional water reserve, and enabling adaptation to drought stress. Moreover, analysis of plant antioxidant enzyme activities (CAT, APx and GPx), MDA and GSH content indicate that fullerenol foliar application could have some beneficial effect on alleviating oxidative effects of drought stress, depending on the concentration of nanoparticles applied. Although further studies are necessary to elucidate the biochemical impact of FNPs on plants; the present results could directly impact agricultural practice, where available water supplies are often a limiting factor in plant bioproductivity.

Carbon Nanotubes Filled with Different Ferromagnetic Alloys Affect the Growth and Development of Rice Seedlings by Changing the C:N Ratio and Plant Hormones Concentrations

The aim of this study was to investigate the phytotoxicity of thin-walled carbon nanotubes (CNTs) to rice (Oryza sativa L.) seedlings. Three different CNTs, including hollow multi-walled carbon nanotubes (MWCNTs), Fe-filled carbon nanotubes (Fe-CNTs), and Fe-Co-filled carbon nanotubes (FeCo-CNTs), were evaluated. The CNTs significantly inhibited rice growth by decreasing the concentrations of endogenous plant hormones. The carbon to nitrogen ratio (C:N ratio) significantly increased in rice roots after treatments with CNTs, and all three types of CNTs had the same effects on the C:N ratio. Interestingly, the increase in the C:N ratio in roots was largely because of decreased N content, indicating that the CNTs significantly decreased N assimilation. Analyses of the Fe and Co contents in plant tissues, transmission electron microscope (TEM) observations and energy dispersive X-ray spectroscopy (EDS) analysis proved that the CNTs could penetrate the cell wall and the cell membrane, and then enter the root cells. According to the author's knowledge, this is the first time to study the relationship between carbon nanotubes and carbon nitrogen ratio and plant hormones.

Determination of uptake, accumulation, and stress effects in corn (Zea mays L.) grown in single-wall carbon nanotube contaminated soil

Single-wall carbon nanotubes (SWNTs) are projected to increase in usage across many industries. Two studies were conducted using Zea L. (corn) seeds exposed to SWNT spiked soil for 40 d. In Study 1, corn was exposed to various SWNT concentrations (0, 10, and 100 mg/kg) with different functionalities (non-functionalized, OH-functionalized, or surfactant stabilized). A microwave induced heating method was used to determine SWNTs accumulated mostly in roots (0-24 μg/g), with minimal accumulation in stems and leaves (2-10 μg/g) with a limit of detection at 0.1 μg/g. Uptake was not functional group dependent. In Study 2, corn was exposed to 10 mg/kg SWNTs (non-functionalized or COOH-functionalized) under optimally grown or water deficit conditions. Plant physiological stress was determined by the measurement of photosynthetic rate throughout Study 2. No significant differences were seen between control and SWNT treatments. Considering the amount of SWNTs accumulated in corn roots, further studies are needed to address the potential for SWNTs to enter root crop species (i.e., carrots), which could present a significant pathway for human dietary exposure.

Responses of testis, epididymis, and sperm of pubertal rats exposed to functionalized multiwalled carbon nanotubes

The present study investigated the response of testes, epididymides and sperm in pubertal Wistar rats following exposure to 0, 0.25, 0.5, 0.75, and 1.0 mg kg(-1) functionalized multi-walled carbon nanotubes (f-MWCNTs) for 5 days. The results showed that administration of (f-MWCNTs) significantly increased the activities of superoxide dismutase, catalase, and glutathione peroxidase in a dose-dependent manner in both testes and sperm compared with control group. Moreover, the significant decrease in the activity of glutathione-S-transferase and glutathione level was accompanied with significant elevation in the levels of hydrogen peroxide and malondialdehyde in both testes and sperm of (f-MWCNTs)-treated rats. The spermiogram of (f-MWCNTs)-treated rats indicated significant decrease in epididymal sperm number, sperm progressive motility, testicular sperm number and daily sperm production with elevated sperm abnormalities when compared with the control. Exposure to (f-MWCNTs) decreased plasma testosterone level and produced marked morphological changes including decreased geminal epithelium, edema, congestion, reduced spermatogenic cells and focal areas of tubular degeneration in the testes. The lumen of the epididymides contained reduced sperm cells and there was mild to severe hyperplasia epithelial cells lining the duct of the epididymis. Collectively, pubertal exposure of male rats to (f-MWCNTs) elicited oxidative stress response resulting in marked testicular and epididymides dysfunction.

Influence of the morphology of carbon nanostructures on the stimulated growth of gram plant

The growth stimulation of gram plants (Cicer arietinum) by water dispersible carbon nanostructures is found to be dependent on the latter's morphology.