The TD Drive: A Parametric, Open-Source Implant for Multi-Area Electrophysiological Recordings in Behaving and Sleeping Rats

Intricate interactions between multiple brain areas underlie most functions attributed to the brain. The process of learning, as well as the formation and consolidation of memories, are two examples that rely heavily on functional connectivity across the brain. In addition, investigating hemispheric similarities and/or differences goes hand in hand with these multi-area interactions. Electrophysiological studies trying to further elucidate these complex processes thus depend on recording brain activity at multiple locations simultaneously and often in a bilateral fashion. Presented here is a 3D-printable implant for rats, named TD Drive, capable of symmetric, bilateral wire electrode recordings, currently in up to ten distributed brain areas simultaneously. The open-source design was created employing parametric design principles, allowing prospective users to easily adapt the drive design to their needs by simply adjusting high-level parameters, such as anterior-posterior and mediolateral coordinates of the recording electrode locations. The implant design was validated in n = 20 Lister Hooded rats that performed different tasks. The implant was compatible with tethered sleep recordings and open field recordings (Object Exploration) as well as wireless recording in a large maze using two different commercial recording systems and headstages. Thus, presented here is the adaptable design and assembly of a new electrophysiological implant, facilitating fast preparation and implantation.

Pop-up Langmuir probe diagnostic in the water cooled divertor of Wendelstein 7-X

The design, development, and successful implementation of pop-up Langmuir probes installed in the water-cooled divertor of W7-X are described. The probes are controlled by drive coils (actuators) installed behind the divertor plates. These drive coils make use of the magnetic field in W7-X to move the probe tips into and out of the plasma. The drive coils were installed in the vacuum vessel after extensively testing the durability of the coils and analyzing the criteria for safe operation. The probe design is carefully tailored for each of the 36 probe tips in order to be suitable for the different magnetic field configurations used in W7-X and ensure that the probes do not present leading edges to the magnetic flux tubes. An electronic bridge circuit is used for measurement to compensate for the effects of signal propagation time on the long cable lengths used. The diagnostic is integrated with the segment control of W7-X for automated operation and control of the diagnostic. The evaluation of the results from the plasma operation is presented after accounting for appropriate sheath expansion for negative bias voltage on the probes.

Comparative assessment of two-phase class II treatment with Activator or Bionator followed by fixed appliances: A retrospective controlled before-and-after study

AIM

Two-phase treatment for children with Class II malocclusion with several functional appliances is still performed by many orthodontists, while the Activator and the Bionator appliances are two of the most popular ones. Aim of this study was to compare the skeletal and dentoalveolar effects of treatment with these two appliances.

METHODS

Class II children treated with Activator or Bionator in the first phase, followed by a phase of fixed appliances were included. Skeletal and dentoalveolar parameters were assessed from lateral cephalograms and analysed with linear regressions at 5%.

RESULTS

A total of 89 patients (mean age 10.0 years; 47% female) were included. During the first phase, Bionator increased less the SNB (difference in mean treatment-induced changes [MD] -0.7°; 95% confidence interval [CI] -1.3 to -0.2°; P=0.01) and decreased less the ANB angle (MD 0.6°; 95% CI 0 to 1.1°; P=0.03) compared to Activator. Activator slightly increased the facial axis and Bionator reduced it (MD -1.6°; 95% CI -2.3 to -0.8°; P<0.001). Compared to Activator, the Bionator retroclined more the upper incisors (MD -2.4°; 95% CI -4.6 to -0.2°; P=0.03) and increased more the interincisal angle (MD 2.9°; 95% CI 0.5 to 5.4°; P=0.02). After the second phase (6.2 years after baseline), the only differences were a reduced facial axis (MD -1.3°; 95% CI -2.2 to -0.3°; P=0.008) and an increased maxillary rotation (MD 0.9°; 95% CI 0 to 1.8°; P=0.04) with Bionator compared to Activator.

CONCLUSION

Similar dentoalveolar effects were seen overall with two-phase treatment with either appliance, with Bionator being associated with more vertical increase compared to Activator.

DNA Origami-Based Single-Molecule Force Spectroscopy and Applications

Over the last years, single-molecule force spectroscopy provided insights into the intricate connection between mechanical stimuli and biochemical signaling. The underlying molecular mechanisms were uncovered and explored using techniques such as atomic force microscopy and force spectroscopy using optical or magnetic tweezers. These experimental approaches are limited by thermal noise resulting from a physical connection of the studied biological system to the macroscopic world. To overcome this limitation, we recently introduced the DNA origami force clamp (FC) which is a freely diffusing nanodevice that generates piconewton forces on a DNA sequence of interest. Binding of a protein to the DNA under tension can be detected employing fluorescence resonance energy transfer (FRET) as a sensitive readout.This protocol introduces the reader to the working principles of the FC and provides instructions to design and generate a DNA origami FC customized for a protein of interest. Molecular cloning techniques are employed to modify, produce, and purify a custom DNA scaffold. A fluorescently labeled DNA suitable to detect protein binding via FRET is generated via enzymatic ligation of commercial DNA oligonucleotides. After thermal annealing of all components, the DNA origami FC is purified using agarose gel electrophoresis. The final section covers the interrogation of the FC using confocal single-molecule FRET measurements and subsequent data analysis to quantify the binding of a DNA-binding protein to its cognate recognition site under a range of forces. Using this approach, force-dependent DNA-protein interactions can be studied on the single-molecule level on thousands of molecules in a parallelized fashion.

Resource-efficient fault-tolerant one-way quantum repeater with code concatenation

One-way quantum repeaters where loss and operational errors are counteracted by quantum error-correcting codes can ensure fast and reliable qubit transmission in quantum networks. It is crucial that the resource requirements of such repeaters, for example, the number of qubits per repeater node and the complexity of the quantum error-correcting operations are kept to a minimum to allow for near-future implementations. To this end, we propose a one-way quantum repeater that targets both the loss and operational error rates in a communication channel in a resource-efficient manner using code concatenation. Specifically, we consider a tree-cluster code as an inner loss-tolerant code concatenated with an outer 5-qubit code for protection against Pauli errors. Adopting flag-based stabilizer measurements, we show that intercontinental distances of up to 10,000 km can be bridged with a minimized resource overhead by interspersing repeater nodes that each specialize in suppressing either loss or operational errors. Our work demonstrates how tailored error-correcting codes can significantly lower the experimental requirements for long-distance quantum communication.

Reliability and accuracy of single-molecule FRET studies for characterization of structural dynamics and distances in proteins

Single-molecule Förster-resonance energy transfer (smFRET) experiments allow the study of biomolecular structure and dynamics in vitro and in vivo. We performed an international blind study involving 19 laboratories to assess the uncertainty of FRET experiments for proteins with respect to the measured FRET efficiency histograms, determination of distances, and the detection and quantification of structural dynamics. Using two protein systems with distinct conformational changes and dynamics, we obtained an uncertainty of the FRET efficiency ≤0.06, corresponding to an interdye distance precision of ≤2 Å and accuracy of ≤5 Å. We further discuss the limits for detecting fluctuations in this distance range and how to identify dye perturbations. Our work demonstrates the ability of smFRET experiments to simultaneously measure distances and avoid the averaging of conformational dynamics for realistic protein systems, highlighting its importance in the expanding toolbox of integrative structural biology.

DNA Origami Curvature Sensors for Nanoparticle and Vesicle Size Determination with Single-Molecule FRET Readout

Particle size is an important characteristic of materials with a direct effect on their physicochemical features. Besides nanoparticles, particle size and surface curvature are particularly important in the world of lipids and cellular membranes as the cell membrane undergoes conformational changes in many biological processes which leads to diverging local curvature values. On account of that, it is important to develop cost-effective, rapid and sufficiently precise systems that can measure the surface curvature on the nanoscale that can be translated to size for spherical particles. As an alternative approach for particle characterization, we present flexible DNA nanodevices that can adapt to the curvature of the structure they are bound to. The curvature sensors use Fluorescence Resonance Energy Transfer (FRET) as the transduction mechanism on the single-molecule level. The curvature sensors consist of segmented DNA origami structures connected via flexible DNA linkers incorporating a FRET pair. The activity of the sensors was first demonstrated with defined binding to different DNA origami geometries used as templates. Then the DNA origami curvature sensors were applied to measure spherical silica beads having different size, and subsequently on lipid vesicles. With the designed sensors, we could reliably distinguish different sized nanoparticles within a size range of 50-300 nm as well as the bending angle range of 50-180°. This study helps with the development of more advanced modular-curvature sensing devices that are capable of determining the sizes of nanoparticles and biological complexes.

Trust and compliance: Milieu-specific differences in social cohesion during the COVID-19 pandemic in Germany

As a response to the COVID-19 pandemic, an increase in social cohesion was observed during the first wave and its aftermath. A closer look reveals heterogeneous responses regarding aspects of cohesion-such as trust in others and compliance with containment measures-that differ by individual socioeconomic and cultural characteristics. How these characteristics affect social cohesion in combination is rarely investigated. Therefore, we introduce the concept of social milieus, which addresses the interrelation of socioeconomic and cultural characteristics on the level of social groups, into the international debate. While previous studies have applied this concept to the analysis of social cohesion during the pandemic, they exhibit theoretical and empirical shortcomings. Hence, we develop a new theoretical model of social milieus and an empirical typology using the German sample of the European Social Survey. This typology is matched with data from the Research Institute Social Cohesion (RISC) for a milieu-specific analysis of social cohesion. Results show considerable heterogeneity in social cohesion during the first wave of the pandemic in Germany. Three social milieus with potentially conflicting modes of social cohesion regarding trust and compliance stand out while other milieus are less diverging as presumed in the literature. These modes can be interpreted as emerging from a combination of the milieus' socioeconomic position and basic human values. Thus, the new theoretical model and empirical typology of social milieus contribute to the understanding of how social cohesion has been contested between social milieus early in the pandemic.

DNA-Liposome Hybrid Carriers for Triggered Cargo Release

The design of simple and versatile synthetic routes to accomplish triggered-release properties in carriers is of particular interest for drug delivery purposes. In this context, the programmability and adaptability of DNA nanoarchitectures in combination with liposomes have great potential to render biocompatible hybrid carriers for triggered cargo release. We present an approach to form a DNA mesh on large unilamellar liposomes incorporating a stimuli-responsive DNA building block. Upon incubation with a single-stranded DNA trigger sequence, a hairpin closes, and the DNA building block is allowed to self-contract. We demonstrate the actuation of this building block by single-molecule Förster resonance energy transfer (FRET), fluorescence recovery after photobleaching, and fluorescence quenching measurements. By triggering this process, we demonstrate the elevated release of the dye calcein from the DNA–liposome hybrid carriers. Interestingly, the incubation of the doxorubicin-laden active hybrid carrier with HEK293T cells suggests increased cytotoxicity relative to a control carrier without the triggered-release mechanism. In the future, the trigger could be provided by peritumoral nucleic acid sequences and lead to site-selective release of encapsulated chemotherapeutics.

Coherent Interactions between Silicon-Vacancy Centers in Diamond

We report tunable excitation-induced dipole-dipole interactions between silicon-vacancy color centers in diamond at cryogenic temperatures. These interactions couple centers into collective states, and excitation-induced shifts tag the excitation level of these collective states against the background of excited single centers. By characterizing the phase and amplitude of the spectrally resolved interaction-induced signal, we observe oscillations in the interaction strength and population state of the collective states as a function of excitation pulse area. Our results demonstrate that excitation-induced dipole-dipole interactions between color centers provide a route to manipulating collective intercenter states in the context of a congested, inhomogeneous ensemble.

Quantitative Single-Molecule Measurements of Membrane Charges with DNA Origami Sensors

Charges in lipid head groups generate electrical surface potentials at cell membranes, and changes in their composition are involved in various signaling pathways, such as T-cell activation or apoptosis. Here, we present a DNA origami-based sensor for membrane surface charges with a quantitative fluorescence read-out of single molecules. A DNA origami plate is equipped with modifications for specific membrane targeting, surface immobilization, and an anionic sensing unit consisting of single-stranded DNA and the dye ATTO542. This unit is anchored to a lipid membrane by the dye ATTO647N, and conformational changes of the sensing unit in response to surface charges are read out by fluorescence resonance energy transfer between the two dyes. We test the performance of our sensor with single-molecule fluorescence microscopy by exposing it to differently charged large unilamellar vesicles. We achieve a change in energy transfer of ∼10% points between uncharged and highly charged membranes and demonstrate a quantitative relation between the surface charge and the energy transfer. Further, with autocorrelation analyses of confocal data, we unravel the working principle of our sensor that is switching dynamically between a membrane-bound state and an unbound state on the timescale of 1-10 ms. Our study introduces a complementary sensing system for membrane surface charges to previously published genetically encoded sensors. Additionally, the single-molecule read-out enables investigations of lipid membranes on the nanoscale with a high spatial resolution circumventing ensemble averaging.

How Blinking Affects Photon Correlations in Multichromophoric Nanoparticles

A single chromophore can only emit a maximum of one single photon per excitation cycle. This limitation results in a phenomenon commonly referred to as photon antibunching (pAB). When multiple chromophores contribute to the fluorescence measured, the degree of pAB has been used as a metric to "count" the number of chromophores. But the fact that chromophores can switch randomly between bright and dark states also impacts pAB and can lead to incorrect chromophore numbers being determined from pAB measurements. By both simulations and experiment, we demonstrate how pAB is affected by independent and collective chromophore blinking, enabling us to formulate universal guidelines for correct interpretation of pAB measurements. We use DNA-origami nanostructures to design multichromophoric model systems that exhibit either independent or collective chromophore blinking. Two approaches are presented that can distinguish experimentally between these two blinking mechanisms. The first one utilizes the different excitation intensity dependence on the blinking mechanisms. The second approach exploits the fact that collective blinking implies energy transfer to a quenching moiety, which is a time-dependent process. In pulsed-excitation experiments, the degree of collective blinking can therefore be altered by time gating the fluorescence photon stream, enabling us to extract the energy-transfer rate to a quencher. The ability to distinguish between different blinking mechanisms is valuable in materials science, such as for multichromophoric nanoparticles like conjugated-polymer chains as well as in biophysics, for example, for quantitative analysis of protein assemblies by counting chromophores.

Use of Hemoadsorption in Patients With Severe Intoxication Requiring Extracorporeal Cardiopulmonary Support-A Case Series

Drugs intoxications often lead to severe vasoplegia and cardiogenic shock, and VA-ECMO represents a viable therapy option. However, as cardiopulmonary support is not contributing to the removal of the causal agent from the blood, detoxification by a new hemoadsorption device (CytoSorb) could represent a potential therapeutic tool due to its highly efficient elimination capacity of endogenous but also exogenous hydrophobic substances for which otherwise no effective antidote exist. In this case series, four anecdotal cases of acute intoxications requiring VA-ECMO support used as extracorporeal cardiopulmonary resuscitation after intoxication-induced out-of-hospital cardiac arrest (OHCA) are presented, who were additionally treated with CytoSorb hemoadsorption in combination with renal replacement therapy. Combined treatment was associated with a considerable decrease in plasma levels of the overdosed drugs. Additionally, the combination of applied techniques was safe, practical, and technically feasible with no adverse or any device-related side effects documented during or after the treatment sessions. Based on the reported dramatic decline in drug levels during treatment, that fits in the device's characteristics, we strongly suggest to further investigate the potentially lifesaving role of CytoSorb therapy in patients with acute intoxications requiring multiple organ support techniques.

Graphene Energy Transfer for Single-Molecule Biophysics, Biosensing, and Super-Resolution Microscopy

Graphene is considered a game-changing material, especially for its mechanical and electrical properties. This work exploits that graphene is almost transparent but quenches fluorescence in a range up to ≈40 nm. Graphene as a broadband and unbleachable energy-transfer acceptor without labeling, is used to precisely determine the height of molecules with respect to graphene, to visualize the dynamics of DNA nanostructures, and to determine the orientation of Förster-type resonance energy transfer (FRET) pairs. Using DNA origami nanopositioners, biosensing, single-molecule tracking, and DNA PAINT super-resolution with <3 nm z-resolution are demonstrated. The range of examples shows the potential of graphene-on-glass coverslips as a versatile platform for single-molecule biophysics, biosensing, and super-resolution microscopy.

Hidden Silicon-Vacancy Centers in Diamond

We characterize a high-density sample of negatively charged silicon-vacancy (SiV^{-}) centers in diamond using collinear optical multidimensional coherent spectroscopy. By comparing the results of complementary signal detection schemes, we identify a hidden population of SiV^{-} centers that is not typically observed in photoluminescence and which exhibits significant spectral inhomogeneity and extended electronic T_{2} times. The phenomenon is likely caused by strain, indicating a potential mechanism for controlling electric coherence in color-center-based quantum devices.

Roadmap on quantum nanotechnologies

Quantum phenomena are typically observable at length and time scales smaller than those of our everyday experience, often involving individual particles or excitations. The past few decades have seen a revolution in the ability to structure matter at the nanoscale, and experiments at the single particle level have become commonplace. This has opened wide new avenues for exploring and harnessing quantum mechanical effects in condensed matter. These quantum phenomena, in turn, have the potential to revolutionize the way we communicate, compute and probe the nanoscale world. Here, we review developments in key areas of quantum research in light of the nanotechnologies that enable them, with a view to what the future holds. Materials and devices with nanoscale features are used for quantum metrology and sensing, as building blocks for quantum computing, and as sources and detectors for quantum communication. They enable explorations of quantum behaviour and unconventional states in nano- and opto-mechanical systems, low-dimensional systems, molecular devices, nano-plasmonics, quantum electrodynamics, scanning tunnelling microscopy, and more. This rapidly expanding intersection of nanotechnology and quantum science/technology is mutually beneficial to both fields, laying claim to some of the most exciting scientific leaps of the last decade, with more on the horizon.

Picosecond time-resolved photon antibunching measures nanoscale exciton motion and the true number of chromophores

The particle-like nature of light becomes evident in the photon statistics of fluorescence from single quantum systems as photon antibunching. In multichromophoric systems, exciton diffusion and subsequent annihilation occurs. These processes also yield photon antibunching but cannot be interpreted reliably. Here we develop picosecond time-resolved antibunching to identify and decode such processes. We use this method to measure the true number of chromophores on well-defined multichromophoric DNA-origami structures, and precisely determine the distance-dependent rates of annihilation between excitons. Further, this allows us to measure exciton diffusion in mesoscopic H- and J-type conjugated-polymer aggregates. We distinguish between one-dimensional intra-chain and three-dimensional inter-chain exciton diffusion at different times after excitation and determine the disorder-dependent diffusion lengths. Our method provides a powerful lens through which excitons can be studied at the single-particle level, enabling the rational design of improved excitonic probes such as ultra-bright fluorescent nanoparticles and materials for optoelectronic devices.

DNA origami-based single-molecule force spectroscopy elucidates RNA Polymerase III pre-initiation complex stability

The TATA-binding protein (TBP) and a transcription factor (TF) IIB-like factor are important constituents of all eukaryotic initiation complexes. The reason for the emergence and strict requirement of the additional initiation factor Bdp1 in the RNA polymerase (RNAP) III system, however, remained elusive. A poorly studied aspect in this context is the effect of DNA strain arising from DNA compaction and transcriptional activity on initiation complex formation. We made use of a DNA origami-based force clamp to follow the assembly of human initiation complexes in the RNAP II and RNAP III systems at the single-molecule level under piconewton forces. We demonstrate that TBP-DNA complexes are force-sensitive and TFIIB is sufficient to stabilise TBP on a strained promoter. In contrast, Bdp1 is the pivotal component that ensures stable anchoring of initiation factors, and thus the polymerase itself, in the RNAP III system. Thereby, we offer an explanation for the crucial role of Bdp1 for the high transcriptional output of RNAP III.

Cold Physical Plasma-Treated Buffered Saline Solution as Effective Agent Against Pancreatic Cancer Cells

BACKGROUND

Cold physical plasma has been suggested as a new anticancer tool recently. However, direct use of plasma is limited to visible tumors and in some clinical situations, is not feasible. This includes repetitive treatment of peritoneal metastases, which commonly occur in advanced gastrointestinal cancer and in pancreatic cancer in particular. In case of diffuse intraperitoneal metastatic spread, Hyperthermic Intraperitoneal Intraoperative Chemotherapy (HIPEC) is used as a therapeutic approach. Plasma-treated solutions may combine non-toxic characteristics with the anticancer effects of HIPEC. Previous work has provided evidence for an anticancer efficacy of plasma-treated cell culture medium but the clinical relevance of such an approach is low due to its complex formulation and lack of medical accreditation.

OBJECTIVE

Plasma-treated Phosphate-Buffered Saline (PBS), which closely resembles medically certified solutions, was investigated for its cytotoxic effect on 2D monolayer murine pancreatic cancer cells in vitro.

METHODS

Toxicity studies of primary murine fibroblasts, PDA6606 murine pancreatic cancer cells, and COLO 357 human pancreatic cancer cells exposed to plasma-treated PBS were performed.

RESULTS

Plasma-treated PBS significantly decreased cancer cell metabolisms and proliferation whereas plasma-treated Dulbecco's Modified Eagle Medium had no effect. Moreover, tumor cell growth attenuation was significantly higher when compared to syngeneic primary murine fibroblasts. Both results were confirmed in a human pancreatic cancer cell line. Finally, plasma-treated PBS also decreased the size of pancreatic tumors in a three-dimensional manner, and induction of apoptosis was found to be responsible for all anticancer effects identified.

CONCLUSION

Plasma-treated PBS inhibited cell growth in 2D and 3D models of cancer. These results may help facilitate the development of new plasma-derived anticancer agent with clinical relevance in the future.

Anemochory of diapausing stages of microinvertebrates in North American drylands

1. Dry, ephemeral, desert wetlands are major sources of windblown sediment, as well as repositories for diapausing stages (propagules) of aquatic invertebrates. Zooplankton propagules are of the same size range as sand and dust grains. They can be deflated and transported in windstorm events. This study provides the evidence that dust storms aid in dispersal of microinvertebrate propagules via anemochory (aeolian transport). 2. We monitored 91 windstorms at six sites in the southwestern U.S. over a 17-year period. The primary study site was located in El Paso, Texas in the northern Chihuahuan Desert. Additional samples were collected from the Southern High Plains region. Dust carried by these events was collected and rehydrated to hatch viable propagules transported with it. 3. Using samples collected over a six-year period, 21 m above the ground which included 59 storm events, we tested the hypothesis that transport of propagules is correlated with storm intensity by monitoring meteorological conditions such as storm duration, wind direction, wind speed, and PM₁₀ (fine dust concentration). An air quality monitoring site located adjacent to the dust samplers provided quantitative hourly measurements. 4. Rehydration results from all events showed that ciliates were found in 92% of the samples, rotifers in 81%, branchiopods in 29%, ostracods in 4%, nematodes in 13%, gastrotrichs in 16%, and tardigrades in 3%. Overall, four bdelloid and 11 monogonont rotifer species were identified from rehydrated windblown dust samples. 5. PCA results indicated gastrotrichs, branchiopods, nematodes, tardigrades, and monogonont rotifer occurrence positively correlated with PM₁₀ and dust event duration. Bdelloid rotifers were correlated with amount of sediment deposited. NMDS showed a significant relationship between PM₁₀ and occurrence of some taxa. Zero-inflated, general linear models with mixed-effects indicated significant relationships with bdelloid and nematode transport and PM₁₀. 6. Thus, windstorms with high particulate matter concentration and long duration are more likely to transport microinvertebrate diapausing stages in drylands.

The object space task shows cumulative memory expression in both mice and rats

Declarative memory encompasses representations of specific events as well as knowledge extracted by accumulation over multiple episodes. To investigate how these different sorts of memories are created, we developed a new behavioral task in rodents. The task consists of 3 distinct conditions (stable, overlapping, and random). Rodents are exposed to multiple sample trials, in which they explore objects in specific spatial arrangements, with object identity changing from trial to trial. In the stable condition, the locations are constant during all sample trials even though the objects themselves change; in the test trial, 1 object’s location is changed. In the random condition, object locations are presented in the sample phase without a specific spatial pattern. In the overlapping condition, 1 location is shared (overlapping) between all trials, while the other location changes during sample trials. We show that in the overlapping condition, instead of only remembering the last sample trial, rodents form a cumulative memory of the sample trials. Here, we could show that both mice and rats can accumulate information across multiple trials and express a long-term abstracted memory.

Memories are stored and retrieved in different ways, depending on the age of memory and the character of the information, but many tasks for rodent subjects cannot differentiate between them. A new training paradigm for rats and mice enables testing for abstracted memory representation while controlling for memory recency.

Interchromophoric Interactions Determine the Maximum Brightness Density in DNA Origami Structures

An ideal point light source is as small and as bright as possible. For fluorescent point light sources, homogeneity of the light sources is important as well as that the fluorescent units inside the light source maintain their photophysical properties, which is compromised by dye aggregation. Here we propose DNA origami as a rigid scaffold to arrange dye molecules in a dense pixel array with high control of stoichiometry and dye-dye interactions. In order to find the highest labeling density in a DNA origami structure without influencing dye photophysics, we alter the distance of two ATTO647N dyes in single base pair steps and probe the dye-dye interactions on the single-molecule level. For small distances strong quenching in terms of intensity and fluorescence lifetime is observed. With increasing distance, we observe reduced quenching and molecular dynamics. However, energy transfer processes in the weak coupling regime still have a significant impact and can lead to quenching by singlet-dark-state-annihilation. Our study fills a gap of studying the interactions of dyes relevant for superresolution microscopy with dense labeling and for single-molecule biophysics. Incorporating these findings in a 3D DNA origami object will pave the way to bright and homogeneous DNA origami nanobeads.

Design, capabilities, and first results of the new laser blow-off system on Wendelstein 7-X

We present a detailed overview and first results of the new laser blow-off system on the stellarator Wendelstein 7-X. The system allows impurity transport studies by the repetitive and controlled injection of different tracer ions into the plasma edge. A Nd:YAG laser is used to ablate a thin metal film, coated on a glass plate, with a repetition rate of up to 20 Hz. A remote-controlled adjustable optical system allows the variation of the laser spot diameter and enables the spot positioning to non-ablated areas on the target between laser pulses. During first experiments, clear spectral lines from higher ionization stages of the tracer ions have been observed in the X-ray to the extreme ultraviolet spectral range. The temporal behavior of the measured emission allows the estimate of transport properties, e.g., impurity transport times in the order of 100 ms. Although the strong injection of impurities is well detectable, the global plasma parameters are barely changed.

Efficient Extraction of Light from a Nitrogen-Vacancy Center in a Diamond Parabolic Reflector

Quantum emitters in solids are being developed for a range of quantum technologies, including quantum networks, computing, and sensing. However, a remaining challenge is the poor photon collection due to the high refractive index of most host materials. Here we overcome this limitation by introducing monolithic parabolic reflectors as an efficient geometry for broadband photon extraction from quantum emitter and experimentally demonstrate this device for the nitrogen-vacancy (NV) center in diamond. Simulations indicate a photon collection efficiency exceeding 75% across the visible spectrum and experimental devices, fabricated using a high-throughput gray scale lithography process, demonstrating a photon extraction efficiency of (41 ± 5)%. This device enables a raw experimental detection efficiency of (12 ± 1)% with fluorescence detection rates as high as (4.114 ± 0.003) × 10⁶ counts per second (cps) from a single NV center. Enabled by our deterministic emitter localization and fabrication process, we find a high number of exceptional devices with an average count rate of (3.1 ± 0.9) × 10⁶ cps.

Spin-photon interface and spin-controlled photon switching in a nanobeam waveguide

The spin of an electron is a promising memory state and qubit. Connecting spin states that are spatially far apart will enable quantum nodes and quantum networks based on the electron spin. Towards this goal, an integrated spin-photon interface would be a major leap forward as it combines the memory capability of a single spin with the efficient transfer of information by photons. Here, we demonstrate such an efficient and optically programmable interface between the spin of an electron in a quantum dot and photons in a nanophotonic waveguide. The spin can be deterministically prepared in the ground state with a fidelity of up to 96%. Subsequently, the system is used to implement a single-spin photonic switch, in which the spin state of the electron directs the flow of photons through the waveguide. The spin-photon interface may enable on-chip photon-photon gates, single-photon transistors and the efficient generation of a photonic cluster state.

Bright nanowire single photon source based on SiV centers in diamond

The practical implementation of many quantum technologies relies on the development of robust and bright single photon sources that operate at room temperature. The negatively charged silicon-vacancy (SiV^-) color center in diamond is a possible candidate for such a single photon source. However, due to the high refraction index mismatch to air, color centers in diamond typically exhibit low photon out-coupling. An additional shortcoming is due to the random localization of native defects in the diamond sample. Here we demonstrate deterministic implantation of Si ions with high conversion efficiency to single SiV^- centers, targeted to fabricated nanowires. The co-localization of single SiV^- centers with the nanostructures yields a ten times higher light coupling efficiency than for single SiV^- centers in bulk diamond. This enhanced photon out-coupling, together with the intrinsic scalability of the SiV^- creation method, enables a new class of devices for integrated photonics and quantum science.

Fiber-Coupled Diamond Micro-Waveguides toward an Efficient Quantum Interface for Spin Defect Centers

We report the direct integration and efficient coupling of nitrogen vacancy (NV) color centers in diamond nanophotonic structures into a fiber-based photonic architecture at cryogenic temperatures. NV centers are embedded in diamond micro-waveguides (μWGs), which are coupled to fiber tapers. Fiber tapers have low-loss connection to single-mode optical fibers and hence enable efficient integration of NV centers into optical fiber networks. We numerically optimize the parameters of the μWG-fiber-taper devices designed particularly for use in cryogenic experiments, resulting in 35.6% coupling efficiency, and experimentally demonstrate cooling of these devices to the liquid helium temperature of 4.2 K without loss of the fiber transmission. We observe sharp zero-phonon lines in the fluorescence of NV centers through the pigtailed fibers at 100 K. The optimized devices with high photon coupling efficiency and the demonstration of cooling to cryogenic temperatures are an important step to realize fiber-based quantum nanophotonic interfaces using diamond spin defect centers.

A DNA Walker as a Fluorescence Signal Amplifier

Sensing nucleic acids typically involves the recognition of a specific sequence and reporting by, for example, a fluorogenic reaction yielding one activated dye molecule per detected nucleic acid. Here, we show that after binding to a DNA origami track a bound DNA target (a "DNA walker") can release the fluorescence of many molecules by acting as the catalyst of an enzymatic nicking reaction. As the walking kinetics sensitively depends on the walker sequence, the resulting brightness distribution of DNA origamis is a sequence fingerprint with single-nucleotide sensitivity. Using Monte Carlo simulations, we rationalize that the random self-avoiding walk is mainly terminated when steps to nearest neighbors are exhausted. Finally, we demonstrate that the DNA walker is also active in a plasmonic hotspot for fluorescence enhancement, indicating the potential of combining different amplification mechanisms enabled by the modularity of DNA nanotechnology.

Scalable focused ion beam creation of nearly lifetime-limited single quantum emitters in diamond nanostructures

The controlled creation of defect centre—nanocavity systems is one of the outstanding challenges for efficiently interfacing spin quantum memories with photons for photon-based entanglement operations in a quantum network. Here we demonstrate direct, maskless creation of atom-like single silicon vacancy (SiV) centres in diamond nanostructures via focused ion beam implantation with ∼32 nm lateral precision and <50 nm positioning accuracy relative to a nanocavity. We determine the Si+ ion to SiV centre conversion yield to be ∼2.5% and observe a 10-fold conversion yield increase by additional electron irradiation. Low-temperature spectroscopy reveals inhomogeneously broadened ensemble emission linewidths of ∼51 GHz and close to lifetime-limited single-emitter transition linewidths down to 126±13 MHz corresponding to ∼1.4 times the natural linewidth. This method for the targeted generation of nearly transform-limited quantum emitters should facilitate the development of scalable solid-state quantum information processors.

Interfacing spin quantum memories with photons requires the controlled creation of defect centre—nanocavity systems. Here the authors demonstrate direct, maskless creation of single silicon vacancy centres in diamond nanostructures, and report linewidths comparable to naturally occurring centres

[Emergency medical training through simulation : Always the same for everyone?]

Simulation assumes a growing importance in the field of emergency medical education. Many rescue service schools work with simulators or even have their own simulation center. Classic resuscitation training in the classroom is increasingly being replaced by realistic case scenarios. But simulators themselves do not train! Using a simulator in emergency medical training does not necessarily mean achieving sustained learning success among the participants. Depending on the skills, abilities or competences being taught, there seems to be different requirements for simulation. However, there is no scientific evidence about how strong learners should be stressed in order to achieve the best learning effect. However, it can be stated that for training purely technical skills, simulators that represent the anatomical or physiological reality as accurately as possible should be used. If soft skills, practical knowledge and decision-making are the learning objectives, a scenario with extremly realistic conditions needs to be embedded. Mid-fidelity simulators seem to be able to cover the widest range of imparting skills for emergency medical training. No matter what simulator is used, the following applies: The selected scenario must be realistic and the simulation as well as technical capabilities of the simulator must be coordinated. A well-presented scenario with a well-trained teacher using a simple resuscitation doll appears to be better than a highly complex, however unrealistic, amateur simulation scenario for successful learning.

Bright Room-Temperature Single-Photon Emission from Defects in Gallium Nitride

Room-temperature quantum emitters in gallium nitride (GaN) are reported. The emitters originate from cubic inclusions in hexagonal lattice and exhibit narrowband luminescence in the red spectral range. The sources are found in different GaN substrates, and therefore are promising for scalable quantum technologies.

Overview of diagnostic performance and results for the first operation phase in Wendelstein 7-X (invited)

Wendelstein 7-X, a superconducting optimized stellarator built in Greifswald/Germany, started its first plasmas with the last closed flux surface (LCFS) defined by 5 uncooled graphite limiters in December 2015. At the end of the 10 weeks long experimental campaign (OP1.1) more than 20 independent diagnostic systems were in operation, allowing detailed studies of many interesting plasma phenomena. For example, fast neutral gas manometers supported by video cameras (including one fast-frame camera with frame rates of tens of kHz) as well as visible cameras with different interference filters, with field of views covering all ten half-modules of the stellarator, discovered a MARFE-like radiation zone on the inboard side of machine module 4. This structure is presumably triggered by an inadvertent plasma-wall interaction in module 4 resulting in a high impurity influx that terminates some discharges by radiation cooling. The main plasma parameters achieved in OP1.1 exceeded predicted values in discharges of a length reaching 6 s. Although OP1.1 is characterized by short pulses, many of the diagnostics are already designed for quasi-steady state operation of 30 min discharges heated at 10 MW of ECRH. An overview of diagnostic performance for OP1.1 is given, including some highlights from the physics campaigns.

Ionic and Non-Ionic Contrast Media Used for Contrast-Enhanced Computed Tomography in Experimental Pancreatitis

Contrast enhancement of the pancreas was studied in pigs using dynamic computed tomography in experimental oedematous and haemorrhagic/necrotizing pancreatitis during the first two minutes after injection of an intravenous bolus of non-ionic contrast medium (iohexol). The prospects of separating the two forms of the disease, known to be possible with ionic contrast media, were tested with a non-ionic contrast medium. In the oedematous form, contrast enhancement after 5 hours of the disease was significantly higher than in the haemorrhagic/necrotizing form. Contrast enhancement after 30 hours of disease tended to vary with the severity of the disease, showing that the course of oedematous pancreatitis is dynamic. Intermediate forms occur and follow-up studies are needed during the disease. A non-ionic contrast medium proved as good for separating the two forms of the disease in the early phase as were ionic contrast media. In severely ill patients, non-ionic contrast media should therefore be used.

Efficient photon coupling from a diamond nitrogen vacancy center by integration with silica fiber

A central goal in quantum information science is to efficiently interface photons with single optical modes for quantum networking and distributed quantum computing. Here, we introduce and experimentally demonstrate a compact and efficient method for the low-loss coupling of a solid-state qubit, the nitrogen vacancy (NV) center in diamond, with a single-mode optical fiber. In this approach, single-mode tapered diamond waveguides containing exactly one high quality NV memory are selected and integrated on tapered silica fibers. Numerical optimization of an adiabatic coupler indicates that near-unity-efficiency photon transfer is possible between the two modes. Experimentally, we find an overall collection efficiency between 16% and 37% and estimate a single photon count rate at saturation above 700 kHz. This integrated system enables robust, alignment-free, and efficient interfacing of single-mode optical fibers with single photon emitters and quantum memories in solids.

Efficient photon collection from a nitrogen vacancy center in a circular bullseye grating

Efficient collection of the broadband fluorescence from the diamond nitrogen vacancy (NV) center is essential for a range of applications in sensing, on-demand single photon generation, and quantum information processing. Here, we introduce a circular "bullseye" diamond grating which enables a collected photon rate of (2.7 ± 0.09) × 10(6) counts per second from a single NV with a spin coherence time of 1.7 ± 0.1 ms. Back-focal-plane studies indicate efficient redistribution of the NV photoluminescence into low-NA modes by the bullseye grating.