Recent advances in studies on magnetosome-associated proteins composing the bacterial geomagnetic sensor organelle

Magnetotactic bacteria (MTB) generate a membrane-enclosed subcellular compartment called magnetosome, which contains a biomineralized magnetite or greigite crystal, an inner membrane-derived lipid bilayer membrane, and a set of specifically targeted associated proteins. Magnetosomes are formed by a group of magnetosome-associated proteins encoded in a genomic region called magnetosome island. Magnetosomes are then arranged in a linear chain-like positioning, and the resulting magnetic dipole of the chain functions as a geomagnetic sensor for magneto-aerotaxis motility. Recent metagenomic analyses of environmental specimens shed light on the sizable phylogenetical diversity of uncultured MTB at the phylum level. These findings have led to a better understanding of the diversity and conservation of magnetosome-associated proteins. This review provided an overview of magnetosomes and magnetosome-associated proteins and introduced recent topics about this fascinating magnetic bacterial organelle. This article is protected by copyright. All rights reserved.

Highly active and magnetically recoverable heterogeneous catalyst for hydrothermal liquefaction of biomass into high quality bio-oil

This article reports a safe, low-cost, and industrially applicable magnetite supported on activated carbon catalyst that can be magnetically retrieved from the solid and reused multiple times without the need of a regeneration step. The FeO_x/C catalyst improved the bio-oil yield by 19.7 ± 0.96 % when compared to the uncatalysed reaction at 320 °C for the HTL of draff (brewer's spent grains). The use of homogeneous Na₂CO₃ base as a catalyst and co-catalyst, improved carbon extraction into the aqueous phase. The exceptional catalytic activity can be attributed to the Fe₃O₄ phase which can produce in-situ H₂ that improves the biomass decomposition and oil property with an energy recovery of ∼84 %. The FeO_x/C catalyst was separated using magnetic retrieval and maintained its catalytic activity even up to 5 reaction cycles showing potential as a cheap catalyst for HTL reactions and can be scaled-up for industrial applications.

Effects of synthesized AlFe2O4 and MgFe2O4 nanoparticles on biogas production from anaerobically digested sugar refinery wastewater

The application of magnetic nanoparticles (MNPs) toward sustainable water economy and bioenergy production has become a subject of great interest. Anaerobic digestion (AD) has been widely exploited in wastewater treatment settings, whereby utilization of MNP additives by microorganism response for degradation of organics into biogas is seen to be eco-friendly and economically viable. The present study investigated the impact of two synthesized MNPs such as aluminum ferrite (AlFe₂O₄) and magnesium ferrite (MgFe₂O₄) on biogas production via biochemical methane potential (BMP) tests. A BMP set-up of three (3) bioreactors was tested with a working volume of 0.8 L which comprises 0.5 L wastewater (WW) and 0.3 L activated sludge (AS) with 1.5 g of the MNPs and a control system without MNPs. The degradation of chemical oxygen demand (COD) was increased with set-ups that contained MNPs as compared to the control system, MgFe₂O₄ (93.96%) > AlFe₂O₄ (85.95%) > control (68.83%). In terms of biogas production, the methane yield was also recorded as MgFe₂O₄ (85.7%) > AlFe₂O₄ (84.3%) > control (65.7%). The physical and chemical stability of MNPs makes them more advantageous for application in biogas production. In the prospects of biogas enhancement and biodegradability, integrating MNPs in an anaerobic digestion system will result in a more efficient anaerobic process performance for biogas production.

Enhanced economic benefit of recycling Fe3O4 for promotion of volatile fatty acids production in anaerobic fermentation of food waste

Fe₃O₄ addition in anaerobic fermentation of food waste (FW) is promising for enhancing volatile fatty acids (VFAs) production. However, the large amount of Fe₃O₄ in the digestate fertilizer leads to the waste of resources and possible toxicity to organisms. Thus, this study investigated the feasibility of Fe₃O₄ recycling for VFAs enhancement in anaerobic fermentation of FW and performed the cost-benefit evaluation of this process. Results revealed that Fe₃O₄ could be successfully recycled twice with recovery rates of 71.5% and 65.5%, respectively. X-ray diffraction analysis revealed a slight change to the Fe₂O₃-like structure after 2-time recycling. The VFAs yields were enhanced by 17.2% and 17.0% in Cycles 1 and 2 owing to the enhanced activities of hydrolytic and acid-forming enzymes. The net income of the Fe₃O₄ recycling process was about 13-fold higher than that of the conventional treatment process, suggesting a promising and economically feasible strategy for enhancing VFAs production.

Kinetics, isotherms, and mechanism of removing cationic and anionic dyes from aqueous solutions using chitosan/magnetite/silver nanoparticles

Modified magnetite chitosan with silver nanoparticles was synthesized and tested for removing cationic and anionic dyes in aqueous solutions. Initial dye concentration, pH, and contact time were examined. Results showed that pH (4.0) was optimal for removing anionic dyes (methyl orange) and pH 8.0 for removing cationic dyes (methylene blue). According to these results, zeta potentials were found to be 8.43 and - 39.17 mV at pH 4.0 and 8.0, respectively. So, it is attracted to positively charged cationic dyes in an alkaline medium and negatively charged anionic dyes in an acidic medium because of their opposite charges. Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), thermal gravimetric analysis (TGA), and zeta potential measurements were used to characterize the synthesized nanosorbents. A pseudo-second-order kinetic model is fitted with the Langmuir adsorption model, with an adsorption capacity of 417 and 476 mg/g for methyl orange and methylene blue, respectively. For both dyes, modified magnetite chitosan with silver nanoparticles showed high regeneration capability and recovery for up to four cycles without adsorption efficiency loss. Furthermore, modified magnetite chitosan with silver nanoparticles, as prepared in the present study, was demonstrated to be an effective adsorbent for organic pollutants in wastewater.

Effects of magnetite on microbially driven nitrate reduction processes in groundwater

Nitrate is a common pollutant in the aquatic environment. Denitrification and dissimilatory nitrate reduction to ammonium (DNRA) are the main reduction processes of nitrate. In the relatively closed sediment environment, the competitive interaction of these two nitrate reduction determines whether the ecosystem removes or retains nitrogen. In the process of NO₃^--N bioreduction, Magnetite, which is a common mineral present in soil and other sediments can play a crucial role. However, it is still not clear whether magnetite promotes or inhibits NO₃^--N bioreduction. In this paper, the effect of magnetite on NO₃^--N bioreduction was studied by batch experiments. The results show that magnetite can increase the NO₃^--N reduction rate by 1.48 %, and can inhibit the DNRA process at the beginning of the reaction and then promote the DNRA process. Magnetite changed the microbial community structure in our experiment systems. The relative abundance of Sphingomonas, which mainly exists in a high carbon and low nitrogen environment, increased under sufficient carbon source conditions. The relative abundance of Fe-oxidizing and NO₃^--N reducing bacteria, such as Flavobacterium, increased in the absence of carbon sources but in the presence of magnetite. In addition, magnetite can significantly increase activity of the microbial electron transport system (ETS). the added microbial electronic activity of magnetite increased nearly two-fold under the same experiment conditions. The acid produced by the metabolisms of Pseudomonas and Acinetobacter further promotes the dissolution of magnetite, thus increasing the concentration of Fe (II) in the system, which is beneficial to autotrophic denitrifying bacteria and promote the reduction of NO₃^--N. These findings can enhance our understanding of the interaction mechanism between iron minerals and nitrate reducing bacteria during nitrate reduction under natural conditions.

Carbon dots decorated magnetite nanocomposite obtained using yerba mate useful for remediation of textile wastewater through a photo-Fenton treatment: Ilex paraguariensis as a platform of environmental interest-part 2

Two carbon dots (CD) with diameters of 4.9 ± 1.5 and 4.1 ± 1.2 nm were successfully synthesized through an acid ablation route with HNO₃ or H₂SO₄, respectively, using Ilex paraguariensis as raw material. The CD were used to produce magnetite-containing nanocomposites through two different routes: hydrothermal and in situ. A thorough characterization of the particles by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), dynamic light scattering (DLS), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) indicates that all nanomaterials have spherical-like morphology with a core-shell structure. The composition of this structure depends on the route used: with the hydrothermal route, the shell is composed of the CD, but with the in situ process, the CD act as nucleation centers, and so the iron oxide domains are in the shell. Regarding the photocatalytic mechanism for the degradation of methyl orange, the interaction between the CD and the magnetite plays an important role in the photo-Fenton reaction at pH 6.2, in which ligand-to-metal charge transfer processes (LTMCT) allow Fe²⁺ regeneration. All materials (100 ppm) showed catalytic activity in the elimination of methyl orange (8.5 ppm), achieving discoloration of up to 98% under visible irradiation over 400 nm in 7 h. This opens very interesting possibilities for the use of agro-industrial residues for sustainable synthesis of catalytic nanomaterials, and the role of the interaction of iron-based catalysts with organic matter in heterogeneous Fenton-based processes.

Magnetic Co/CoOx@NCNT catalysts for activation of potassium peroxymonosulfate to deteriorate phenol from wastewater

Phenols are of much toxicological and they must be effectively removed from the wastewater from industries as well as sewage treatment. Such removal demands a special and strong composite. So, this piece of research aims to activate Potassium peroxymonosulfate (PPMS) with the large surface area of magnetite nitrogen-fixed porous carbon nanotube composites (Co/CoOx@NCNT). Increases in the graphitization degree and structural control brought about by the incorporation of reduced Graphite oxide (rGO) significantly increased the catalyst activity of Co/CoOx@NCNT. It was found that PPMS activation for phenol removal by Co/CoOx@NCNT was nearly as effective as by homogeneous Co²⁺, with nearly 100% removal efficiency in 10 min. Both high reusability and high recycling of Co/CoOx@NCNT were accomplished simultaneously by proving the technology of viability in practical applications. The PPMS activation mechanism in the Co/CoOx@NCNT/PPMS system was driven by the electron transmission from contaminants to PPMS through the sp^2- hybrid carbon nanotubes and nitrogen system. The selectivity of the Co/CoOx@NCNT/PPMS system to remove diverse organic compounds was determined by batch experiments. Due to the insignificant impact of radicals reactive on pollutant breakdown, the ability to inhibit species (such as Cl^- and natural organic materials) from a minor role was significantly decreased. These results not only shed light on the process of PPMS heterogeneous activation but also provided a framework for the balanced project of highly effective nanocarbon-based catalysts for PPMS activation.

Spectral Detection of Nanophase Iron Minerals Produced by Fe(III)-Reducing Hyperthermophilic Crenarchaea

Mineral transformations by two hyperthermophilic Fe(III)-reducing crenarchaea, Pyrodictium delaneyi and Pyrobaculum islandicum, were examined using synthetic nanophase ferrihydrite, lepidocrocite, and akaganeite separately as terminal electron acceptors and compared with abiotic mineral transformations under similar conditions. Spectral analyses using visible-near-infrared, Fourier-transform infrared attenuated total reflectance (FTIR-ATR), Raman, and Mössbauer spectroscopies were complementary and revealed formation of various biomineral assemblages distinguishable from abiotic phases. The most extensive biogenic mineral transformation occurred with ferrihydrite, which formed primarily magnetite with spectral features similar to biomagnetite relative to a synthetic magnetite standard. The FTIR-ATR spectra of ferrihydrite bioreduced by P. delaneyi also showed possible cell-associated organics such as exopolysaccharides. Such combined detections of biomineral assemblages and organics might serve as biomarkers for hyperthermophilic Fe(III) reduction. With lepidocrocite, P. delaneyi produced primarily a ferrous carbonate phase reminiscent of siderite, and with akaganeite, magnetite and a ferrous phosphate phase similar to vivianite were formed. P. islandicum showed minor biogenic production of a ferrous phosphate similar to vivianite when grown on lepidocrocite, and a mixed valent phosphate or sulfate mineral when grown on akaganeite. These results expand the range of biogenic mineral transformations at high temperatures and identify spacecraft-relevant spectroscopies suitable for discriminating mineral biogenicity.

Magnetic susceptibility as a proxy for detection of total petroleum hydrocarbons in contaminated wetlands

Soil petroleum hydrocarbon contamination in the wetlands could cause ecological risk, especially through leakage into water reservoirs. So, the detection of the spatial variability of total petroleum hydrocarbons (TPH) in these soils is very crucial. The variability of TPH and its associations with magnetic susceptibility (χ_lf) in contaminated soils around the Shadegan pond in southern Iran was investigated. TPH varied from 2.1 to 18.1% (w/w), by the variation of χ_lf from 14.08 to 713.93 × 10^-8 m³ kg^-1. The highest variability (coefficient of variation, CV = 107.12%) was obtained for χ_lf indicating significant impacts of magnetic minerals induced by crude oil contamination. High positive correlations were detected among TPH, χ_lf, and different forms of iron (Fe_d: extracted by CBD, Fe_o: extracted by oxalate, and Fe_t: total iron). The results of mineralogy by powdery XRD and scanning electron microscopy (SEM), also revealed the formation of ferrimagnetic minerals (magnetite, maghemite) during the biodegradation of petroleum hydrocarbons. The stepwise multiple regression analysis showed that χ_lf and Fe_d made a great contribution and could explain about 74% of TPH variability in the studied sites. For the extension of this cost-effective and rapid technique, further work is needed to assay saturation isothermal remnant magnetization and isothermal remanet magnetization in contaminated sites.

Dendrimer-based magneto-plasmonic nanosorbents for water quality monitoring using surface-enhanced Raman spectroscopy

In this work, we report the synthesis of magneto-plasmonic dendrimer-based nanosorbents containing Au nanostars and we demonstrate that they can be used as versatile optical sensors for the detection of pesticides in spiked water samples. The magnetic hybrid nanoparticles were obtained by conjugating silica-functionalized G5-NH₂ PAMAM dendrimers to silica-coated magnetite cores. The resulting magnetic-PAMAM conjugates were then used to reduce and sequester Au seeds for the subsequent in situ growth of Au nanostars. The dendrimer-based magneto-plasmonic substrates containing the Au anisotropic nanophases were then investigated regarding their ability to monitor water quality through surface-enhanced Raman scattering (SERS) spectroscopy. As a proof-of-concept, the ensuing multifunctional materials were investigated as SERS probing systems to detect dithiocarbamate pesticides (ziram and thiram) dissolved in water samples. It was observed that the magneto-plasmonic hybrid materials enhance the Raman signal of these pesticides under variable operational conditions, suggesting the versatility of these systems for water quality monitoring. Moreover, a detailed analysis of the SERS data was accomplished to predict the adsorption profile of the dithiocarbamate pesticides to the Au surface.

Metagenomic analysis reveals the size effect of magnetite on anaerobic digestion of waste activated sludge after thermal hydrolysis pretreatment

Although magnetite has been widely investigated in anaerobic digestion (AD), its role in the practical AD of waste-activated sludge (WAS) after thermal hydrolysis pretreatment (THP) and its size effect remain unclear. In this study, magnetite with four different particle sizes was added during the AD of WAS after THP. With the reduction of magnetite particle size, cumulative methane production was increased, while the optimal dosage of magnetite decreased, with 0.1 μm magnetite at an optimal dosage of 2 g/L achieving the highest cumulative methane production increase of 111.97 % compared with the blank group (without magnetite). Smaller magnetite particles increased α-glucosidase and protease activities, coenzyme F₄₂₀ concentration, and electron-transport system activity (20.30 %, 173.02 %, 60.39 % and 158.08 % higher respectively than the blank group). The size of magnetite also influenced the establishment of direct interspecies electron transfer (DIET) during AD. Based on the analysis of the pilA gene abundance, magnetite with a large particle size could promote the formation of e-pili in syntrophic electroactive bacteria (Clostridium, Syntrophomonas, and Pseudomonas) and methanogens (Methanospirillum), thereby completing electron transfer. However, small-sized magnetite particles stimulated DIET by enhancing the secretion of conductive proteins in extracellular polymeric substances and membrane-bound enzymes (Fpo) in Methanosarcina.

High efficiency of magnetite nanoparticles for the arsenic removal from an aqueous solution and natural water taken from Tambo River in Peru

Water is an essential compound on earth and necessary for life. The presence of highly toxic contaminants such as arsenic and others, in many cases, represents one of the biggest problems facing the earth´s population. Treatment of contaminated water with magnetite (Fe3O4) nanoparticles (NPs) can play a crucial role in arsenic removal. In this report, we demonstrate arsenic removal from an aqueous solution and natural water taken from the Peruvian river (Tambo River in Arequipa, Peru) using magnetite NPs synthesized by the coprecipitation method. XRD data analysis of Fe3O4 NPs revealed the formation of the cubic-spinel phase of magnetite with an average crystallite size of ~ 13 nm, which is found in good agreement with the physical size assessed from TEM image analysis. Magnetic results evidence that our NPs show a superparamagnetic-like behavior with a thermal relaxation of magnetic moments mediated by strong particle-particle interactions. FTIR absorption band shows the interactions between arsenate anions and Fe-O and Fe-OH groups through a complex mechanism. The experimental results showed that arsenic adsorption is fast during the first 10 min; while the equilibrium is reached within 60 min, providing an arsenic removal efficiency of ~ 97%. Adsorption kinetics is well modeled using the pseudo-second-order kinetic equation, suggesting that the adsorption process is related to the chemisorption model. According to Langmuir's model, the maximum arsenic adsorption capacity of 81.04 mg·g- 1 at pH = 2.5 was estimated, which describes the adsorption process as being monolayer, However, our results suggest that multilayer adsorption can be produced after monolayer saturation in agreement with the Freundlich model. This finding was corroborated by the Sips model, which showed a good correlation to the experimental data. Tests using natural water taken from Tambo River indicate a significant reduction of arsenic concentration from 356 µg L- 1 to 7.38 µg L- 1, the latter is below the limit imposed by World Health Organization (10 µg L- 1), suggesting that magnetite NPs show great potential for the arsenic removal.

Foliar-applied nanoscale zero-valent iron (nZVI) and iron oxide (Fe3O4) induce differential responses in growth, physiology, antioxidative defense and biochemical indices in Leonurus cardiaca L

The impacts of nZVI and iron oxides on growth, physiology and elicitation of bioactive antioxidant metabolites in medicinal aromatic plants must be critically assessed to ensure their safe utilization within the food chain and achieve nutritional gains. The present study investigated and compared the morpho-physiological and biochemical changes of Leonurus cardiaca L. plants as affected by various concentrations (0, 250, 500 and 1000 mg L^-1) of nZVI and Fe₃O₄. The foliar uptake of nZVI was verified through Scanning Electron Microscopy (SEM) images and Energy Dispersive X-ray (EDX) analytical spectra. Plants exposed to nZVI at low concentration showed comparatively monotonic deposition of NPs on the surface of leaves, however, the agglomerate size of nZVI was raised as their doses increased, leading to remarkable changes in anatomical and biochemical traits. 250 mg L^-1 nZVI and 500 mg L^-1 Fe₃O₄ significantly (P < 0.05) increased plant dry matter accumulation by 37.8 and 27% over the control, respectively. The treatments of nZVI and Fe₃O₄ at 250 mg L^-1 significantly (P < 0.01) improved chlorophyll a content by 22.4% and 15.3% as compared to the control, and then a rapid decrease (by 14.8% and 4.1%) followed at 1000 mg L^-1, respectively. Both nZVI and Fe₃O₄ at 250 mg L^-1 had no significant impact on malondialdehyde (MDA) formation, however, at an exposure of 500-1000 mg L^-1, the MDA levels and cellular electrolyte leakage were increased. Although nZVI particles could be utilized by plants and enhanced the synthesis of chlorophylls and secondary metabolites, they appeared to be more toxic than Fe₃O₄ at 1000 mg L^-1. Exposure to nZVI levels showed positive, negative and or neutral impacts on leaf water content compared to control, while no significant difference was observed with Fe₃O₄ treatments. Soluble sugar, total phenolics and hyperoside content were significantly increased upon optimum concentrations of employed treatments-with 250 mg L^-1 nZVI being most superior. Among the extracts, those obtained from plants treated with 250-500 mg L^-1 nZVI revealed the strong antioxidant activity in terms of scavenging free radical (DPPH) and chelating ferrous ions. These results suggest that nZVI (at lower concentration) has alternative and additional benefits both as nano-fertilizer and nano-elicitor for biosynthesis of antioxidant metabolites in plants, but at high concentrations is more toxic than Fe₃O₄.

As (III) removal using superparamagnetic magnetite nanoparticles synthesized using Ulva prolifera - optimization, isotherm, kinetic and equilibrium studies

In this study, magnetite nanoparticles (MNPs) were synthesized using the seaweed - Ulva prolifera, an amply found marine source in the Western coastal regions of India. The surface and other properties of MNPs were characterized by many sophisticated methods. Spherical nanoclusters were observed in the FESEM image and iron and oxygen elements were seen in EDS results. XRD peaks were consistent with magnetite standards and MNPs had good crystallinity. FTIR portrayed the specific signals for MNPs and TGA profile ascertained the thermal stability. Magnetic saturation of 41.84 emu/g with negligible hysteresis loop substantiated the superparamagnetism. XPS pointed out the presence of Fe and O with oxidation states specific for MNPs, and the results were consistent with EDS. BET revealed a high specific surface area (144.98 m²/g) of MNPs with mesopores. The synthesized MNPs were used as nanoadsorbent for the removal of As (III) from aqueous solution. The central composite design was used for optimizing As (III) adsorption on MNPs. The optimum conditions were found out as 97.5% at pH: 9, rotation speed: 150 rpm, time: 90 min, and MNPs dosage: 1.15 g/L. The adsorption process fitted in a better way with the Langmuir isotherm and pseudo-second-order model. The highest adsorption capacity was 12.45 mg/g, which is substantially larger than the documenter reports. The spontaneous and endothermic nature of adsorption were ascertained from thermodynamic studies. The results suggested that the synthesized MNPs using the extract of U. prolifera could be alternative nanoadsorbents for eliminating toxic heavy metals from waste streams.

Effect of magnetite particle size on propionate degradation in the propionate-based anaerobic system

The size effect of magnetite (Fe₃O₄) on the degradation of propionate (PA) in the PA-based anaerobic system was investigated. The sequential bench-scale experiments were conducted. Results showed that the effects of different sized magnetite particles on PA degradation varied, and reaction cycles also played a role in substrate removal/degradation. With the increase of reaction cycle, nano-magnetite promoted PA degradation and CH₄ production, which caused faster PA degradation rate (0.997 g/L·d) than the control group (CK) without magnetite (0.834 g/L·d), whereas the groups with micron- and millimeter-sized magnetite had slower PA degradation rates (0.746 and 0.636 g/L·d) than CK group. The particle size or surface characteristics of the magnetite may become the main factor determining the PA degradation rate. Furthermore, the analysis of PA conversion and volatile fatty acids (VFAs) distribution showed the C6-dismutation pathway, which converses PA to butyrate, enhanced by the introduction of magnetite. Microbial community analysis showed that PA was degraded mainly by methyl-malonyl-CoA (MMC) pathway. The relative abundance of Syntrophobacter that catalyze MMC pathway in the group with nano-magnetite were much higher after three reaction cycles at 39 %, as compared to micro-magnetite at 28 %, and millimeter-sized magnetite at 27 %, which contributed to faster degradation of PA. Functional enzyme-encoding genes for the four methanogenesis pathways were identified with reference to KEGG database entries. The methanogenesis pathway using acetate was the most abundant pathway in all groups. The observations have important implications for enhancing the PA removal in PA-inhibited anaerobic digester.

Lanthanum carbonate hydroxide/magnetite nanoparticles functionalized porous biochar for phosphate adsorption and recovery: Advanced capacity and mechanisms study

As the increase of global industrial activities, phosphate from industrial wastes such as sewage sludge has become one of the limiting factors for water eutrophication. Herein, lanthanum carbonate hydroxide (La(CO₃)OH)/magnetite (Fe₃O₄) nanoparticles functionalized porous biochar (La/Fe-NBC) with high phosphate adsorption properties is synthesized through molten salt pyrolysis-coprecipitation-hydrothermal multi-step regulation, and further reveal the related processes and mechanisms. La(CO₃)OH functions as active sites for phosphate adsorption, Fe₃O₄ imparts magnetic properties to the composite substance, also porous biochar (NBC) acts as the carrier to prevent the agglomeration of La(CO₃)OH and Fe₃O₄ nanoparticles. The adsorption process of La/Fe-NBC for phosphate fits to the Pseudo-Second Order and Langmuir model, with the theoretical maximum adsorption capacity up to 99.46 mg P/g. And La/Fe-NBC possesses excellent magnetic field (14.50 emu/g), stability, and selectivity, which enables for efficient multiple recovery and reuse. Mechanistic studies have shown that ligand exchange (inner-sphere complexation) between phosphate and carbonate/hydroxyl groups of La(CO₃)OH, and electrostatic attraction play the dominant roles during adsorption process, although susceptible to the solution pH. While co-precipitation is not influenced of pH conditions but with limited contribution to phosphate adsorption. This study may facilitate to optimize the synthesis design of phosphate multi-functional composites for low-carbon and sustainable treatment of industrial phosphate-containing wastes.

Fe3O4 enhanced efficiency of volatile fatty acids production in anaerobic fermentation of food waste at high loading

High treatment capacity for food waste (FW) is required due to the huge amount generated worldwide. Conversion of FW to volatile fatty acids (VFAs) via anaerobic fermentation is a promising technology; however, inhibition of VFAs production could easily occur at high loadings. In this study, Fe3O4 was used to enhance VFAs production in anaerobic fermentation of FW at high loading, and the mechanisms involved were revealed at microbial levels. Results showed that Fe3O4 significantly enhanced VFAs yield and VFAs productivity of microbes by 160% at high loading (substrate to inoculum (S/I) ratio of 3). The enhancement effect of Fe3O4 was mainly due to the accelerated hydrolysis of particulate/soluble organics, the enriched hydrolytic and acidogenic bacteria, and the reduced relative abundance of Lactobacillus. This study provides a new approach for the high-efficient treatment of FW at high loadings, while the performance and economic benefit should be further studied for practical application.

Nano magnetite assisted flocculation for efficient harvesting of lutein and lipid producing microalgae biomass

For commercial scale algal biorefining, harvesting cost is a major bottleneck. Thus, a cost-effective, less-energy intensive, and efficient harvesting method is being investigated. Among several harvesting methods, magnetic flocculation offers the benefits of modest operation, energy savings and quick separation. This study aims to develop novel magnetite-(Fe₃O₄) nanoparticles (MNPs) of 20 nm average size and their high reusability potential to reduce the harvesting cost of microalgae biomass. The MNPs were synthesized and characterized using FTIR, Zeta analyzer, and SEM before performing on Chlorella sorokiniana Kh12 and Tu5. For maximum harvesting efficiency >99%, the optimal culture pH, MNPs concentration, and agitation speed were 3, 200 mg/L, and 450 rpm, respectively. Subsequently, MNPs were recovered via alkaline treatment and reused up to 5 cycles as they retained their reactivity and harvesting efficiency. The studied MNPs-based harvesting method could be adopted at a commercial scale for cost-effective algae biorefinery in the future.

The amphibian magnetic sense(s)

Sensitivity to the earth's magnetic field is the least understood of the major sensory systems, despite being virtually ubiquitous in animals and of widespread interest to investigators in a wide range of fields from behavioral ecology to quantum physics. Although research on the use of magnetic cues by migratory birds, fish, and sea turtles is more widely known, much of our current understanding of the functional properties of vertebrate magnetoreception has come from research on amphibians. Studies of amphibians established the presence of a light-dependent magnetic compass, a second non-light-dependent mechanism involving particles of magnetite and/or maghemite, and an interaction between these two magnetoreception mechanisms that underlies the "map" component of homing. Simulated magnetic displacement experiments demonstrated the use of a high-resolution magnetic map for short-range homing to breeding ponds requiring a sampling strategy to detect weak spatial gradients in the magnetic field despite daily temporal variation at least an order of magnitude greater. Overall, reliance on a magnetic map for short-range homing places greater demands on the underlying sensory detection, processing, and memory mechanisms than comparable mechanisms used by long-distance migrants. Moreover, unlike sea turtles and migratory birds, amphibians are exceptionally well suited to serve as model organisms in which to characterize the molecular and biophysical mechanisms underlying the light-dependent 'quantum compass'.

The role of magnetite (Fe3O4) particles for enhancing the performance and granulation of anammox

In this study, two lab-scale sequencing batch reactors each with an effective volume of 2.3 L were operated as C-AMX (no carrier addition) and M-AMX (magnetite carrier added) for 147 days with synthetic wastewater at an NLR range of 0.19-0.47 kgN/m³/d. The long-term effect of magnetite on the granulation and performance of anammox bacteria in terms of nitrogen removal and other essential parameters were confirmed. In phase I (1-24 days), M-AMX took approximately 12 days to obtain a nitrogen removal rate (NRR) above 80 % of the initial input nitrogen. Although free nitrous acid inhibited the reactor at a high concentration at the onset of phase III, the NRR of M-AMX recovered about 3.7 times faster than that of C-AMX. In addition, it was confirmed that the M-AMX granules had a dense and compact structure compared to C-AMX, and the presence of the carrier promoted the development of these resilient granules. While the measured microbial stress gradually increased in C-AMX reactor, a vice versa was observed in the M-AMX reactor as granulation proceeded. Compared to other alternative iron-based carrier particles, the stable crystal structure of magnetite as a carrier created a mechanism where filamentous bacteria groups were repelled from the granulation hence the microbial stress in the M-AMX in the final phase was 61.54 % lower than that in the C-AMX. The iron rich environment created by the magnetite addition led to Ignavibacteria, (a Feammox bacteria) increasing significantly in the M-AMX bioreactor.

Adsorption of caesium and cobalt ions on the muscovite mica clay-graphene oxide-γ-Fe2O3-Fe3O4 composite

The muscovite mica clay-graphene oxide-maghemite-magnetite (γ-Fe₂O₃-Fe₃O₄) composite was first used for the adsorption of caesium(I) and cobalt(II). The presence of clay minerals, graphene oxide, maghemite, and magnetite was detected in the prepared composite by XRD, WD-XRF, Mössbauer spectroscopy, and ATR-FTIR. The SEM and TEM results show that the composite has a layered structure with irregularly shaped pores on the surface. It was found that the adsorption of ions depends on the initial concentration, pH (except for caesium), mass of adsorbent, temperature, and contact time. The maximum adsorption capacity for Cs(I) and Co(II) was 2286 mg/g and 652 mg/g, respectively, and was obtained at concentrations (Cs(I) = 12,630 mg/L; Co(II) = 3200 mg/L), adsorbent mass of 0.01 g, pH (Cs(I) = 7; Co(II) = 5), temperature of 20 ± 1 °C, and contact time of 24 h. The high adsorption capacity of the composite could be due to a diversity of functional groups, a large number of active sites or the multilayer adsorption of caesium and cobalt ions on the surface of the composite. The Freundlich, Langmuir isotherms, and the pseudo-second-order kinetic model better describe the adsorption of these ions on the composite. The adsorption was non-spontaneous endothermic for Cs(I) and spontaneous endothermic for Co(II). The proposed mechanism of adsorption of Cs and Co ions on the composite is complex and involves electrostatic interactions and ion exchange. The ANFIS model proved to be quite effective in predicting the adsorption of Cs(I) and Co(II), as shown by the obtained values of R², MSE, SSE, and ARE.

Theranostics platform of Abemaciclib using magnetite@silica@chitosan nanocomposite

The current study was designed to synthesize a nanoformula comprising of magnetite nanoparticles (MN) with mesoporous silica (MS), which was in turn coated with chitosan (CS) and further loaded with a chemotherapeutic agent, Abemaciclib (ABE). The prepared formula, MN@MS@CS@ABE, was characterized by XRD, FTIR, HRTEM, FESEM, DLS, VSM, BET, and BJH. The ABE loading capacity and entrapment efficiency were calculated, and an in vitro drug release experiment was conducted. Cytoxicity was studied by the MTT assay. The formula was investigated as an anticancer agent versus MCF-7 cells by performing Annexin V-FITC flow cytometry and cell cycle analysis. Furthermore, we examine the formula as a contrast agent in magnetic resonance imaging (MRI). ABE loading and encapsulation efficiency were 24.2 % and 63.4 %, respectively. The formula demonstrated sustained drug release behavior for 72 h. The MTT assay revealed a higher cytotoxicity of free ABE in MCF-7 cells compared to MN@MS@CS@ABE. Flow cytometry revealed early and late phases of apoptosis and necrosis with different percentages. The formula stimulated a reduction in signal intensity in the MR T2-weighted imaging technique. In conclusion, the current study developed a nanoformula which could be a promising theranostic agent in cancer therapy and diagnosis.

Modelling of urea hydrolysis kinetics using genetic algorithm coupled artificial neural networks in urease immobilized magnetite nanoparticles

The presence of urea in runoff from fertilized soil could be contributing to the growth of dangerous blooms. Enzymatic urea hydrolysis is a well-known outstanding process that, when integrated with nanotechnology, would be much more efficient. This research provides a novel perspective on magnetic nanobiocatalysts that reduce diffusion barriers in effective urea hydrolysis. Surprisingly, the model developed with the use of a Genetic Algorithm (GA) and an Artificial Neural Network (ANN) demonstrated that the system's diffusion restrictions were reduced. In order to forecast accurate outputs using artificial intelligence (AI), a neural network with one hidden layer and 20 neurons was built utilizing multilayer feed-forward network and showed highest output (diffusion co-efficient) with least mean square error (MSE). The diffusion coefficients of free urease, urease immobilized onto porous MNs (U-aMNs), and nanobiocatalyst, i.e. urease immobilized onto surface modified MNs (U-MN_β), were 1.9 × 10^-17, 12.62 × 10^-16, and 15.48 × 10^-16 cm²/min, respectively. These results revealed that the addition of Chitosan to the surface of MNs had a considerable impact on enzyme dispersion. The decrease in Damkohler number (Da) from 2.37 ± 0.26 for U-aMNs to 2.19 ± 0.11 for U-MN_β suggested a beneficial effect in overcoming diffusion constraints. Pseudo-first order and pseudo-second order models were used to analyze urea uptake kinetics, with the former model offering the best fit to the system, with R² values that were much closer to unity.

Influence of iron species on the simultaneous nitrate and sulfate removal in constructed wetlands under low/high COD concentrations

Nitrate and sulfate are crucial factors of eutrophication and black and odorous water in the surface water and thus have raised increasing environmental concerns. Constructed wetlands (CWs) are the last ecological barrier before effluent enters the natural water body. To explore the simultaneous removal of nitrate and sulfate, the CW microcosms of CW-Con (with quartz sand), CW-ZVI (quartz sand and zero-valent iron), CW-Mag (quartz sand and magnetite), CW-ZVI + Mag (quartz sand, ZVI and magnetite) groups were set up under the low (100 mg/L)/high (300 mg/L) chemical oxygen demand (COD) concentration. Under the high COD condition, CW-ZVI group showed the best performance in nitrate (97.1%) and sulfate (96.9%) removal. Under the low COD concentration, the removal content of nitrate and sulfate in CW-ZVI group was better than CW-Mag group. The reason for this result was that zero-valent iron (ZVI) could be the electron donor for nitrate and sulfate reduction. Meanwhile, ZVI promoted chemical denitrification under high COD concentration according to PCA analysis. In addition, the produced sulfides inhibited the relative abundance of denitrifying bacteria, resulting in the lowest nitrate removal rate in CW-Mag group with sufficient electron donors. This study provided an alternative method to enhance simultaneous sulfate and nitrate removal in CWs.

Controllable engineering magnetite nanoparticles dispersed in a hierarchical amylose derived carbon and reduced graphene oxide framework for lithium-ion storage

A straightforward and eco-friendly method is demonstrated to engineer magnetite (Fe₃O₄) nanoparticles well dispersed by an amorphous amylose-derived carbon (AMC) and reduced graphene oxide (RGO) framework. Naturally available amylose (AM) serves as both reducing agent for few-layered graphene oxide (GO) in the first mild redox coprecipitation system and precursor for small-sized pyrolytic AMC in the following thermal treatment. In particular, the presence of the AM molecules effectively limits the crystal growth kinetics for the akaganeite (FeOOH) in the intermediate FeOOH@AM/RGO sample, which contributes to the transformation to Fe₃O₄ nanoparticles with significantly controlled size in the final Fe₃O₄@AMC/RGO composite. As a result, both Fe₃O₄ nanoparticles and AMC domains are adjacently anchored on the larger sized RGO sheets, and a unique hierarchical structure has been engineered in the Fe₃O₄@AMC/RGO sample. Compared with the controlled Fe₃O₄@RGO sample, the Fe₃O₄@AMC/RGO composite exhibits remarkably enhanced initial coulombic efficiency, superior cycling stability and rate performance for lithium-ion storage. The mechanisms of the interaction between GO sheets and AM molecules as well as the inspiring electrochemical behaviors of the Fe₃O₄@AMC/RGO electrode have been revealed. The Fe₃O₄@AMC/RGO sample possesses good potential for scaling-up and finding applications in wider fields.

Poly-NIPAM/Fe3O4/multiwalled carbon nanotube nanocomposites for kerosene removal from water

Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H₂SO₄ and HNO₃, and the oxidized MWCNTS were decorated with magnetite (Fe₃O₄). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer-Emmett-Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.

Strategy to enhance semi-continuous anaerobic digestion of food waste by combined use of calcium peroxide and magnetite

Optimizing methane production from food waste (FW) efficiently is always a hot topic in the field of anaerobic digestion (AD). In this study we aimed to improve the conversion of organics to methane by using CaO₂ and magnetite to enhance the semi-continuous AD of food waste. Under the organic load of 2.5 g VS/L·d^-1, the specific methane yield was increased from 333.9 mL CH₄/g·VS to 423.4 mL CH₄/g·VS by adding 0.01 g/L CaO₂ with 0.4 g/L magnetite, improving the production of methane from FW. We assessed reactor performance, ORP changes, mass balance, enzyme activities and characterized the metagenomic profile of microorganisms involved in digestion. These microorganisms showed rapid conversion of volatile fatty acids and increased expression of genes related to hydrolysis and acid production. Thus, the addition of CaO₂ and magnetite optimized the relationship between fermentation bacteria and methanogenic archaea to enhance the overall production of methane. Microorganisms evolved unique adaptive mechanisms in the co-operative environment of CaO₂ and magnetite, as their energy metabolism patterns combined those controlled by individual CaO₂ and magnetite addition. This method of combining a micro-aeration environment with conductive materials provides a new perspective for optimizing the AD of FW.

Hepatotoxic and Neurotoxic Potential of Iron Oxide Nanoparticles in Wistar Rats: a Biochemical and Ultrastructural Study

Iron oxide nanoparticles (IONPs) are increasingly being employed for in vivo biomedical nanotheranostic applications. The development of novel IONPs should be accompanied by careful scrutiny of their biocompatibility. Herein, we studied the effect of administration of three formulations of IONPs, based on their starting materials along with synthesizing methods, IONPs-chloride, IONPs-lactate, and IONPs-nitrate, on biochemical and ultrastructural aspects. Different techniques were utilized to assess the effect of different starting materials on the physical, morphological, chemical, surface area, magnetic, and particle size distribution accompanied with their surface charge properties. Their nanoscale sizes were below 40 nm and demonstrated surface up to 69m²/g, and increased magnetization of 71.273 emu/g. Moreover, we investigated the effects of an oral IONP administration (100 mg/kg/day) in rat for 14 days. The liver enzymatic functions were investigated. Liver and brain tissues were analyzed for oxidative stress. Finally, a transmission electron microscope (TEM) and inductively coupled plasma optical emission spectrometer (ICP-OES) were employed to investigate the ultrastructural alterations and to estimate content of iron in the selected tissues of IONP-exposed rats. This study showed that magnetite IONPs-chloride exhibited the safest toxicological profile and thus could be regarded as a promising nanotherapeutic candidate for brain or liver disorders.

Rationally engineering a hierarchical porous carbon and reduced graphene oxide supported magnetite composite with boosted lithium-ion storage performances

Ferric gallate (Fe-GA), an ancient metal-organic framework (MOF) material, has been recently employed as an eco-friendly and cost-effective precursor sample to synthesize a porous carbon confined nano-iron composite (Fe/RPC), and the Fe element in the Fe/RPC sample could be further oxidized to Fe₃O₄ nanocrystals in a 180 °C hydrothermal condition. On this foundation, this work reports an optimized approach to engineering a hierarchical one-dimensional porous carbon and two-dimensional reduced graphene oxide (RGO) supporting framework with Fe₃O₄ nanoparticles well dispersed. Under mild hydrothermal condition, the redox reaction between metal iron atoms from Fe/RPC and surface functional radicals from few-layered graphene oxide sheets (GO) is triggered. As a result, reinforced microstructure and improved atomic efficiency have been achieved for the Fe₃O₄@RPC/RGO sample. The homogeneously dispersed Fe₃O₄ nanoparticles with controlled size are anchored on the surface of the larger sized RGO coating layers while the smaller sized RPC domains are embedded between the RGO sheets as spacer. Challenges including spontaneous aggregation of RPC, over exposure of Fe₃O₄ nanoparticles and excessive restacking of RGO have been significantly inhibited. Furthermore, micro-sized carbon fiber (CF) is chosen as a structural reinforcement additive during electrode fabrication, and the Fe₃O₄@RPC/RGO sample delivers a good specific capacity of 1170.5 mAh·g^-1 under a current rate of 1000 mA·g^-1 for 500 cycles in the half cell form. The reasons for superior electrochemical behaviors have been revealed and the lithium-ion storage performances of the Fe₃O₄@RPC/RGO sample in the full cell form have been preliminarily investigated.

Biogeochemical Fe(II) generators as a new strategy for limiting Cd uptake by rice and its implication for agricultural sustainability

This work has developed a new strategy of biogeochemical Fe(II) generators for activating microbial Fe(II) generation to immobilize Cd in soils through protons scavenging and coprecipitation. A new biochar modified magnetite (FeBC15) has been fabricated through a top-down method, with which microbial respiration can be stimulated in paddy soil. The FeBC15 exhibits a higher adsorption capacity for Cd than pristine magnetite (1.7 times). The results show that the available Cd can be reduced by 14.4% after adding FeBC15 compared to the control. More importantly, FeBC15 particles promote the conversion of MgCl₂ - Cd to stable crystalline Fe/Al bound Cd under the incubation period. The enhanced pH and Fe(II) leads to a comparably lower Cd availability in soils than in pristine soils, which are supported by the enhanced relative abundance of Geobacter and Clostridium with the FeBC15 treatment (i.e. up to 7.44-7.68 × 10⁹ copies/g soil). The Diffusive Gradients in Thin-films (DGT) study indicates that FeBC15 can lower the replenish capacity of soils (i.e. K_dL values of 0.2-3.6 mL/g) to soil pore waters and limit root absorption. Pot experiments demonstrate that this strategy can alleviate the rice Cd content by 38.4% (< 0.2 mg/kg). This work paves a new pathway for reducing Cd uptake in rice, enabling sustainable remediation of paddy soil.

Application of artificial neural networks to predict Young's moduli of cartilage scaffolds: An in-vitro and micromechanical study

In this study, four-phase Gelatin-Polypyrrole-Akermanite-Magnetite scaffolds were fabricated and analyzed using in-vitro tests and numerical simulations. Such scaffolds contained various amounts of Magnetite bioceramics as much as 0, 5, 10, and 15 wt% of Gelatin-Polypyrrole-Akermanite biocomposite. X-ray diffraction analysis and Fourier transform infrared spectroscopy were conducted. Swelling and degradation of the scaffolds were studied by immersing them in phosphate-buffered saline, PBS, solution. Magnetite bioceramics decreased the swelling percent and degradation duration. By immersing scaffolds in simulated body fluid, the highest formation rate of Apatite was observed in the 15 wt% Magnetite samples. The mean pore size was in an acceptable range to provide suitable conditions for cell proliferation. MG-63 cells were cultured on extracts of the scaffolds for 24, 48, and 72 h and their surfaces for 24 h. Cell viabilities and cell morphologies were assessed. Afterward, micromechanical models with spherical and polyhedral voids and artificial neural networks were employed to predict Young's moduli of the scaffolds. Based on the results of finite element analyses, spherical-shaped void models made the best predictions of elastic behavior in the 0, 5 wt% Magnetite scaffolds compared to the experimental data. Results of the simulations and experimental tests for the ten wt% Magnetite samples were well matched in both micromechanical models. In the 15 wt% Magnetite sample, models with polyhedral voids could precisely predict Young's modulus of such scaffolds.

A novel colorimetric technique for estimating iron in magnetosomes of magnetotactic bacteria based on linear regression

Magnetotactic bacteria (MTB) use iron from their habitat to create magnetosomes, a unique organelle required for magnetotaxis. Due to a lack of cost-effective assay methods for estimating iron in magnetosomes, research on MTB and iron-rich magnetosomes is limited. A systemized assay was established in this study to quantify iron in MTB using ferric citrate colorimetric estimation. With a statistically significant R² value of 0.9935, the iron concentration range and wavelength for iron estimation were optimized using linear regression. This colorimetric approach and the inductively coupled plasma optical emission spectrometry (ICP-OES) exhibited an excellent correlation R² value of 0.961 in the validatory correlative study of the iron concentration in the isolated magnetotactic bacterial strains. In large-scale screening studies, this less-expensive strategy could be advantageous.

Ball-milled magnetite for efficient arsenic decontamination: Insights into oxidation-adsorption mechanism

Conventional adsorbents for decontaminating arsenic exhibit low efficacy for the removal of arsenite (As(III)). This study aims to develop a robust As adsorbent from natural magnetite (M₀) via a facile ball milling process, and evaluate their performance for decontaminating As(III) and As(V) in water and soil systems. The ball milling process decreased the particle size and crystallinity of M₀, resulting in pronounced As removal by the ball-milled magnetite (M_m). Ball milling under air facilitated the formation of Fe-OH and Fe-COOH functional groups on M_m interface, contributing to effective elimination of As(III) and As(V) via hydrogen bonding and complexation mechanisms. Synergistic oxidation effects of hydroxyl and carboxyl groups, and reactive oxygen species (O₂^·-, and ·OH) on the transformation of As(III) to As(V) during the adsorption were proposed to explain the enhanced As(III) removal by M_m. A short-term soil incubation experiment indicated that the addition of M_m (10 wt%) induced a decrease in the concentration of exchangeable As by 30.25%, and facilitated the transformation of water-soluble As into residual fraction. Ball milling thus is considered as an eco-friendly (chemical-free) and inexpensive (scalable, one-stage process) method for upgrading the performance of natural magnetite towards remediating As, particularly for tackling the highly mobile As(III).

Response of methanogenic granules enhanced by magnetite to ammonia stress

Excessive ammonia has an inhibitory effect on anaerobic granular sludge (AnGS) when treating industrial wastewater with high concentration of ammonia and organic matters. The addition of conductive materials has been widely reported to improve the AnGS activity, which has the potential to alleviate the ammonia inhibition. In this study, the addition of magnetite was carried out to enhance the activity of AnGS in UASB reactor, then the response of AnGS to different ammonia levels was investigated. Results showed that magnetite facilitated the enrichment of Methanosaeta and Clostridium sensu stricto 1. Under the ammonia stress (up to 5 g TAN/L), it was interesting that Methanosaeta was better retained (abundance of 45.8%), and the abundance of ammonia-resistant Clostridium sensu stricto 1 increased to 34.3% in presence of magnetite. RT-qPCR analysis revealed that Methanosaeta could maintain metabolically active for counteracting the ammonia inhibition along with the higher transcription of genes encoding for CO₂-dependent pathway. The electron transport activity and ATP content of AnGS were 1.25-2.12 and 1.23-2.56 folds higher than those in the control group, respectively. In addition, the AnGS could maintain the stability of structure because Methanosaeta was the skeleton of AnGS. As a result, the analysis of enzyme activity showed that the overall methanogenic metabolism was more active, thus ensured the effective operation of UASB reactor. This study provided the scientific understanding about the role of magnetite to alleviate the ammonia inhibition, and had important implications for stable treatment and recycling of industrial wastewater.

Recycled mesoporous magnetic composites with high surface area derived from plastic and de-oiled sludge wastes: An empirical comparison on their competitive performance for toxic Cr (VI) removal

The current study focused on the comparative removal of hexavalent chromium using two magnetically modified hybrid adsorbent composites. Their precursor chars were prepared from bio sludge and plastic waste derivatives. The coating of magnetite on the chars' surface was evident from the SEM micrographs. Infusion of magnetite nanoparticles in the native chars aided in the reduction of the composite particles' sizes, thus, forming high surface area composites. Screening of uptake capacities among various blends of char and magnetite were surveyed. Composites of both kinds with a 1:5 ratio of char: iron salts composition answered well. The pH_ZPC and zeta potential values of the composites indicated the neutral charge on the composites' surface. This suggested the need for a highly acidic environment for efficient Cr(VI) removal. Optimum economic conditions for Cr(VI) removal were obtained from the batch studies (solution pH - 1.5; contact time - (a) MPC [magnetic plastic char] - 60 min (b) MBC [magnetic biochar] - 40 min; temperature - 25 °C). The maximum monolayer adsorption capacity of MPC and MBC were found to be 84.67 mg/g and 53.83 mg/g respectively. Isotherm, kinetic and thermodynamic studies revealed the adsorption systems' inclination towards physisorption. From the characterization and modeling results, electrostatic force of attraction and pore filling was anticipated to be the mechanism of adsorption for both MPC and MBC. Thus, in the relative removal studies, MBC was found to compete better than MPC due to its enhanced porosity and surface area.

Simple and low-cost production of magnetite/graphene nanocomposites for heavy metal ions adsorption

It is challenging to produce economical magnetic graphene-based adsorbents on an industrial scale for heavy metal ions removal. Here, magnetite/graphene nanocomposite embedded in activated carbon matrix (magnetite/G-AC) was synthesized via in situ catalytic graphitization of iron-impregnated biochar to obtain graphene encapsulated iron nanoparticles (GEINs) embedded in biochar (BC) matrix, and followed by steam activation of GEINs-BC. Steam activation aimed to upgrade biochar to activated carbon with oxygen functional groups, crack encapsulated graphene shell to graphene nanosheets, and obtain magnetic Fe₃O₄ by oxidation of iron, thereby improving the adsorption capacity of magnetite/G-AC-800 (153.2 mg/g) four times higher than that of GEINs-BC. The parameters on the adsorption capacity were investigated using Pb(II) ions as a typical pollutant as a function of solution pH (3-7), contact time (5-300 min), initial Pb(II) concentration (50-400 mg/L), and adsorbent dosage (0.05-0.25 g). The fitted pseudo-second-order kinetic model and Langmuir model indicated that the main adsorption mechanism was chemical adsorption over monolayer. This research developed a low-cost magnetic adsorbent with the advantage of simple large-scale production and excellent adsorption capacity per unit cost for remediating wastewater.

Photosynthetic bacteria with iron oxide nanoparticles as catalyst for cooking oil removal and valuable products recovery with heavy metal co-contamination

Waste cooking oil discharge causes environmental pollution in receiving waters, particularly when associated with heavy metals that can lead to formation of hazardous organometallic compounds. This study combined iron oxide nanomaterial and the anoxygenic photosynthetic bacterium Rhodopseudomonas faecalis PA2 for removal of cooking oil in the presence of heavy metals. R. faecalis PA2, with known capability to generate beneficial substances from several wastes, was capable of cooking oil removal with production of valuable products. Oil removal, biomass, protein, and carotenoid production were 82.38%, 1.48 g/L, 1,600.19 mg/L, and 1,046.33 mg/L, respectively, under optimal conditions (cooking oil as carbon source and 30% inoculum density). Iron (Fe) stimulates growth of R. faecalis; in this study, Fe₃O₄ nanoparticles were synthesized and used as a catalyst to facilitate interaction and high reactivity between Fe and R. faecalis PA2. Size measurement by transmission electron microscopy (17.44 nm), X-ray diffraction peaks, and magnetic susceptibility confirmed that the synthesized nanoparticles were magnetite Fe₃O₄. Biomass, protein, and carotenoid production of the Fe₃O₄ supplemented experiment increased by 61.56%, 70.78%, and 57.2%, respectively, when compared with the control. When different concentrations of heavy metals (Pb, Ni, Co, and Zn) were supplemented in the media containing cooking oil, Fe₃O₄ addition increased heavy metal tolerance, improved bacterial growth, and enhanced valuable products when compared with the non-supplemented group. This study reports the positive impact of nanoparticle application as a catalyst for valorization of cooking oil waste with heavy metal co-contamination by the photosynthetic bacterium R. faecalis PA2.

XL4 under low carbon to nitrogen ratio: Optimization and mechanism

The removal of nitrate (NO₃^--N) under the low carbon to nitrogen (C/N) ratio is a widespread issue. Here in, a modified biochar (MRHB) was prepared by combining rice husk and magnetite to promote the denitrification performance of Aquabacterium sp. XL4 under low C/N ratio. In addition, when the modified H₂O₂ concentration was 0.6 mM, the dosage was 5.0 g L^-1, the C/N ratio was 1.5, and the pH was neutral, the nitrate removal efficiency is 97.9%. Fluorescence excitation-emission matrix spectra (3D-EEM) showed that the metabolism of strain XL4 was stable under optimal conditions. Furthermore, the results of flow cytometry (FC) showed that the amounts of intact cells with MRHB was excellent. The measurement of cytochrome c concentration, total membrane permeability (T_mp), electron transport system activity (ETSA), and cyclic voltammetry curve (CV) confirmed that the MRHB improved the electron transfer and membrane activity of strain XL4.

Facile synthesis of superparamagnetic thiamine/Fe3O4 with enhanced adsorptivity toward divalent copper ions

The development of environmentally friendly adsorbents has been extensively carried out to overcome the detrimental effects of heavy metal accumulation, which has persistently become a global ecological problem. In pursuit of generating eco-friendly adsorbents, a green method for synthesizing thiamine functionalized-Fe₃O₄ (FT) was developed in this study. A one-step chemical oxidation and functionalization technique was used to prepare FT using the ammonia-containing solvent. A molar ratio of ammonia:Fe:thiamine of 15:1:1 was shown to produce FT15 with high yield, adsorptivity, and purity. XRD, XPS, FTIR, SEM, and SQUID characterization of FT15 revealed the formation of superparamagnetic thiamine functionalized Fe₃O₄ in their particles. This superparamagneticity facilitates the easy recovery of FT15 particles from the waste-containing solution by using an external magnetic force. The batch adsorption of Cu(II) onto FT15 showed the best fit with the Sips adsorption isotherm model with a maximum adsorption capacity of 426.076 mg g^-1, which is 5.69-fold higher capacity than the control unmodified Fe₃O₄ (F15). After five adsorption-desorption cycles, the FT15 can maintain up to 1.95-fold higher capacity than the freshly synthesized F15. Observation on the physicochemical properties of the post-adsorption materials showed the contribution of an amine group, pyrimidine ring, and the thiazolium group of thiamine in boosting its adsorption capacity. This study provides important findings to advance the adsorptivity of magnetic adsorbents with promising recoverability from aqueous solution by employing naturally available and environmentally friendly compounds such as thiamine.

Independent of direct interspecies electron transfer: Magnetite-mediated sulphur cycle for anaerobic degradation of benzoate under low-concentration sulphate conditions

The aim of this study was to investigate the primary mechanism of magnetite promoting anaerobic degradation of aromatic compounds under the low-concentration sulphate conditions. Under influent conditions of benzoate at 50 mM-chemical oxygen demand (COD) and sulphate at 15 mM, magnetite promoted benzoate degradation (77.1% vs 56.3%), while the effluent sulphate concentration was slightly higher than that without magnetite (1.6 mM vs 0.7 mM), inconsistent with functional gene prediction that both sulphate respiration and sulphur compound respiration were relatively more active in the presence of magnetite. Remarkably, X-ray diffraction showed that, signal related to Fe₃O₄ faded away and finally was replaced by FeSO₄ and FeS, indicating that magnetite participated in benzoate degradation coupled to sulphate reduction via dissimilatory Fe(III) reduction. Further X-ray photoelectron spectroscopy showed that, signal related to S⁰ was only detected with magnetite, suggesting the possibility of re-oxidation of sulphide to elemental sulphur coupled to Fe(III) reduction. This was further supported by the increase in abundance of Desulfuromonas acetexigens capable of growing on Fe(III). In addition, magnetite specially enriched the chemolithotrophic sulphur-disproportionating microbes, Desulfovibrio aminophilus, which might proceed the disproportionation of elemental sulphur to sulphate and sulphide to achieve a sulphur cycle for benzoate degradation.

Formation and characterization of conductive magnetite-embedded granules in upflow anaerobic sludge blanket reactor treating dairy wastewater

Promoting direct interspecies electron transfer (DIET) with conductive additives has proved effective in improving anaerobic digestion performance and stability. However, its application is limited by the need to replenish the washout loss of conductive materials. This study reports the formation of conductive magnetite-embedded granular sludge and its long-term influence on the performance of upflow anaerobic sludge blanket reactors treating dairy wastewater. The magnetite-supplemented reactor maintained better performance than the no-magnetite control, with greater sludge settling and electron transport activity, throughout the 192-d experiment at increasing organic loading rates (1.2-8.5 g chemical oxygen demand/L·d). The abundance of electroactive microbes also remained higher in the magnetite-supplemented reactor. The results suggest that DIET-based electric syntrophy was promoted in the magnetite-embedded granules. This study is the first to demonstrate the self-embedment of submicron conductive material into granular sludge and its benefits. These findings offer a new approach to enhancing anaerobic granular sludge systems.

Musca domestica (Diptera: Muscidae) as a biological model for the assessment of magnetite nanoparticles toxicity

The use of nanoparticles (NPs) is rapidly expanding; there is a critical need for efficient assays to first determine the potential toxicity of NPs before their use in human applications. Magnetite nanoparticles (Fe₃O₄ NPs) have tremendous applications which include cell separation, arsenic removal from water and DNA separation. Spherically shaped Fe₃O₄ NPs with sizes ranging from 23 to 30 nm were used in this study. The housefly, Musca domestica is the most common fly species. It is present worldwide and considered to be an important medical insect which can carry and transmit over 100 human pathogens and zoonotic agents. It has been used in this study to assess Fe₃O₄NPs toxicity and give us an overview of their impact. The larvicidal activity of Fe₃O₄NPs was tested against the third instar larvae of M. domestica. We investigated the effects of six varying concentrations (15, 30, 45, 60, 75 and 90 μg/mL) used under laboratory conditions in two differential application assays: contact and feeding. The LC₅₀ value for Fe₃O₄ NPs was 60 and 75 μg/mL by feeding and contact, respectively. To investigate the toxicity effects of Fe₃O₄ NPs on houseflies, morphological and histoarchitectural changes in larvae, pupae and adult flies were analyzed. NP exposure caused morphological abnormalities of larvae and pupae as well as larval pupal intermediates, and deformed adult with crumpled wings. Also, some adults couldn't emerge and remained in their puparia. The histological examinations showed that Fe₃O₄ NPs caused severe tissue damage especially in the cuticle and the digestive system. Thus, besides affecting the organ of first contact (digestive system), remote organs such as the integument are also targeted by Fe₃O₄ NPs suggesting a systemic impact on fly development and physiology.

Effect of magnetite on the catalytic oxidation of polycyclic aromatic hydrocarbons in fly ash from MSW incineration: A comparative study of one-step and two-step hydrothermal processes

Polycyclic aromatic hydrocarbons (PAHs), many of which are carcinogenic, teratogenic, and mutagenic, exist in fly ash (FA) produced from municipal solid waste incineration (MSWI). Hydrothermal treatment (HT) is an efficient approach to remove PAHs from MSWI FA. Here, magnetite (Fe₃O₄) was used as the catalyst and hydrogen peroxide (H₂O₂) as the oxidant for one-step and two-step catalytic hydrothermal methods. When the magnetite dosage increased to 15 wt%, the maximum degradation rates of PAHs were 84.36% and 92.51%, respectively; however, the toxicity equivalent quantity (TEQ) degradation rates of the PAHs both increased upon increasing the magnetite dose. At 20 wt% Fe₃O₄, the maximum TEQ degradation rates of the PAHs were 93.29% and 97.76%, respectively. The reaction between OH and PAHs is non-selective, which means that LMW, MMW, and HMW PAHs were all degraded. The decrease in TEQ was mainly due to the degradation of HMW PAHs, i.e., those with five rings. Under the same Fe₃O₄ dose, oxidant dose, and reaction time, the detoxification of PAHs by the two-step method was significantly better than that of the one-step method, possibly because the two-step method more effectively produced OH. The first step degraded more than 90% of PAHs, and the residual PAHs in the HT products of the first step limited the utilization of the oxidant during the second step. The minerals in the HT products implied that the two-step hydrothermal method not only produced more OH, which reacted with PAHs, but also generated metal-magnetite substitution, which affected its surface reactivity during heavy metal adsorption and catalysis. These results revealed that both magnetite and the two-step hydrothermal treatment degraded PAHs. 20 wt% magnetite was the optimal amount during the two-step hydrothermal catalytic oxidation of MSWI FA.

Combined effect of zero valent iron and magnetite on semi-dry anaerobic digestion of swine manure

Combined effect of zero valent iron (ZVI) and magnetite on semi-dry anaerobic digestion of swine manure was studied. Compared with control, the addition of 5 g/L ZVI, magnetite and their mixture (1:1 wt) increased the CH₄ yield by 17.6%, 22.7% and 21.9%, respectively. The three additives improved CH₄ production through altering the metabolism pathways, rather than improving the solid degradation efficiency. ZVI promoted interspecies hydrogen transfer (IHT) by enriching H₂-comsuming Methanolinea and acetate-oxidizing bacteria (Sedimentibacter and Clostridium). Magnetite enriched dissimilatory iron reduction bacteria (Acinetobacter) to accelerate organic hydrolysis and established direct interspecies electron transfer (DIET) by enriching Methanothrix and Methanospirillum. Key microorganisms relative to IHT (Clostridium) and DIET (Methanothrix and Methanospirillum) were simultaneously enriched with ZVI + magnetite, but they only showed an additive effect on methanogenesis, the lack of synergetic effect was attributable to the possible trade-off between IHT and DIET, or the little improvement effect of additives on substrate biodegradability.

Polyethylene over magnetite-multiwalled carbon nanotubes for kerosene removal from water

In this study, a nano-adsorbent was prepared for kerosene removal from water. Multiwalled carbon nanotubes (MWCNTs) were functionalized with concentrated HNO₃ (nitric acid). Subsequently, Fe₃O₄ (magnetite) nanoparticles were deposited on the MWCNTs to prepare a magnetite/MWCNTs (Fe-MWCNTs) nanocomposite. Then, polyethylene was added to the Fe-MWCNTs to fabricate a polyethylene/magnetite/MWCNTs (PE/Fe-MWCNTs) novel nanocomposite. The nano-adsorbent was characterized using BET, FTIR, Raman, XRD, TEM, and SEM. A kerosene-water model mixture was used for adsorption tests. Several parameters: adsorption time, adsorbent dose, solution pH, solution temperature, and kerosene concentration in the kerosene-water model mixture, were analyzed during adsorption experiments. After each batch experiment, kerosene concentration was determined using high-performance liquid chromatography (HPLC). Magnetic field was used to remove the adsorbent after each experiment. The kerosene adsorption capacity and removal efficiency of the PE/Fe-MWCNTs nanocomposite (3560 mg/g and 71.2 %, respectively) were higher than those of Fe-MWCNTs, ox-MWCNTs, and fresh MWCNTs (3154 mg/g and 63.1 %, 2204 mg/g and 44.0 %, and 2092 mg/g and 41.8 %, respectively). Kerosene adsorption followed a pseudo-second-order kinetic model (R² = 0.999) and the Langmuir isotherm model, suggesting that adsorption was uniform and homogenous process.

Fate and impact of maghemite (γ-Fe2O3) and magnetite (Fe3O4) nanoparticles in barley (Hordeum vulgare L.)

The increasing demand for food in the world has made sustainable agriculture practices even more important. Nanotechnology applications in many areas have also been used in sustainable agriculture in recent years for the purposes to improve plant yield, pest control, etc. However, ecotoxicology and environmental safety of nanoparticles must be evaluated before large-scale applications. This study comparatively explores the efficacy and fate of different iron oxide NPs (γ-Fe₂O₃-maghemite and Fe₃O₄-magnetite) on barley (Hordeum vulgare L.). Various NP doses (50, 100, and 200 mg/L) were applied to the seeds in hydroponic medium for 3 weeks. Results revealed that γ-Fe₂O₃ and Fe₃O₄ NPs significantly improved the germination rate (~37% for γ-Fe₂O₃; ~63% for Fe₃O₄), plant biomass, and pigmentation (P < 0.005). Compared to the control, the iron content of tissues gradually raised by the increasing NPs doses revealing their translocation, which is confirmed by VSM analysis as well. The findings suggest that γ-Fe₂O₃ and Fe₃O₄ NPs have great potential to improve barley growth. They can be recommended for breeding programs as nanofertilizers. However, special care should be paid before the application due to their unknown effects on other living beings.

New insights on plasters, pigments and binder in mural paintings of the Setka tomb (QH 110), Elephantine, Aswan, Upper Egypt

Mural paintings within the tomb of Setka, Qubbet el-Hawa, in Aswan, Upper Egypt, were investigated using a multi-disciplinary analytical approach (Stereomicroscopy, SEM-EXD and FT-IR spectroscopy). The walls of the tomb were hewn from fragile sandstone and covered by a clay plaster, overlaid by two layers of white gypsum plaster. SEM micrographs were indicative of the penetration of fungal mycelium within the pores of the gypsum plaster, forming white encrustations due to the re-precipitation of gypsum. SEM micrographs revealed that the calcification of the gypsum plaster had occurred due to its exposure to a high temperature. The EDX pattern for the white plaster gave the characteristic spectrum of gypsum, the blue pigment was Egyptian blue, the black pigment was magnetite, the white pigment was of gypsum (or anhydrite) and the yellow pigment was limonite. Finally, the FT-IR spectrum of the binder gave the characteristic features of gum Arabic.

Removal of levofloxacin from aqueous solution by green synthesized magnetite (Fe3O4) nanoparticles using Moringa olifera: Kinetics and reaction mechanism analysis

Levofloxacin antibiotic is frequently being detected in the environment and regarded as an emerging contaminant. The present study was focused on the green synthesis of magnetite (Fe₃O₄ - gINPs) nanoparticles from Moringa olifera and its efficiency for removal of levofloxacin from aqueous solution. The adsorbent magnetite nanoparticles (Fe₃O₄) were prepared by green synthesis using Moringa olifera and coprecipitation method. Characterizations analyses of both chemically and green synthesized nanoparticles were performed by SEM, XRD, and FTIR. The average crystallite size of gINPs was 14.34 nm and chemically synthesized was 18.93 nm. The performance of the synthesized product was evaluated by adsorption capacity and removal efficiency. The parameters considered included adsorbent (gINPs) dosage, initial concentration of adsorbate, pH, contact time, and temperature. The obtained data were fitted to kinetic and isotherm models to determine the mechanism. Adsorption batch experiments were conducted to determine the reaction mechanism by studying kinetics while fitting isotherm models for samples analyzed using HPLC at 280 nm. Results showed that 86.15% removal efficiency of 4 mg L^-1 levofloxacin was achieved by 100 mg L^-1 gINPs in 24 h contact time when all other parameters (pH 7, temperature 25 °C) were kept constant. The maximum adsorption capacity achieved at equilibrium was 22.47 mg/g. Further, it was identified as a pseudo-second-order model with R² = 0.965 for adsorption kinetics while isotherm data better fitted to the Freundlich model compared to Langmuir isotherm with R² = 0.994. The potential pathway determined for levofloxacin removal was chemisorption with minor diffusion, multilayer, spontaneous and exothermic processes on the gINPs (Fe₃O₄). Reusability experiments were conducted in four cycles and removal efficiency varied from 85.35% to 80.47%, indicating very high potential of the adsorbent for re-use.

Effect of magnetite on anaerobic digestion treating saline wastewater: Methane production, biomass aggregation and microbial community dynamics

In this study, the effect of magnetite amendment on anaerobic digestion was investigated at three increasing salinity levels (0.5%, 1% and 2% NaCl). The amendment of magnetite enhanced the methane yield by 36.3%, 33.3% and 16.5% at low salinity (0.5% NaCl) and high salinity (1% and 2% NaCl), respectively. Meanwhile, a larger proportion of granules was obtained in the magnetite amended reactor (48.05% vs 33.16% at the end of operation). Microbial analysis suggested magnetite could induce more methanogenesis partnerships between hydrogenotrophic methanogens and syntrophic bacteria. Methanosaeta and Methanocorpusculum were the alternating dominant methanogens at low salinity and high salinity. While Streptococcus and Mesotoga were two prevalent bacteria that showed totally different transition tendency in two reactors. Additionally, the supplement of magnetite could relieve the suppression of methanogenesis-related gene expression caused by salinity, thus facilitated the higher methane production.