Particulate matter and SARS-CoV-2: A possible model of COVID-19 transmission

Indirect Effects of PM2.5 Exposure on COVID-19 Mortality in Greater Jakarta, Indonesia: An Ecological Study

Background

Air pollution, including PM2.5, was suggested as one of the primary contributors to COVID-19 fatalities worldwide. Jakarta, the capital city of Indonesia, was recognized as one of the ten most polluted cities globally. Additionally, the incidence of COVID-19 in Jakarta surpasses that of all other provinces in Indonesia. However, no study has investigated the correlation between PM2.5 concentration and COVID-19 fatality in Jakarta.

Objective

To investigate the correlation between short-term and long-term exposure to PM2.5 and COVID-19 mortality in Greater Jakarta area.

Methods

An ecological time-trend study was implemented. The data of PM2.5 ambient concentration obtained from Nafas Indonesia and the National Institute for Aeronautics and Space (LAPAN)/National Research and Innovation Agency (BRIN). The daily COVID-19 death data obtained from the City's Health Office.

Findings

Our study unveiled an intriguing pattern: while short-term exposure to PM2.5 showed a negative correlation with COVID-19 mortality, suggesting it might not be the sole factor in causing fatalities, long-term exposure demonstrated a positive correlation. This suggests that COVID-19 mortality is more strongly influenced by prolonged PM2.5 exposure rather than short-term exposure alone. Specifically, our regression analysis estimate that a 50 µg/m3 increase in long-term average PM2.5 could lead to an 11.9% rise in the COVID-19 mortality rate.

Conclusion

Our research, conducted in one of the most polluted areas worldwide, offers compelling evidence regarding the influence of PM2.5 exposure on COVID-19 mortality rates. It emphasizes the importance of recognizing air pollution as a critical risk factor for the severity of viral respiratory infections.

Quantitative assessment of aerosol contamination generated during tooth grinding with a speed-increasing handpiece

OBJECTIVES

Tooth grinding produces a significant amount of aerosol particles. The aim of this study was to quantitatively assess particle contamination produced from tooth grinding with a speed-increasing handpiece across a real-world clinical setting.

METHODS

All molar crowns were pretreated into cylinders with a uniform size. A novel computer-assisted numerical control system was used to parametrically study the bur speed: from 20,000 (20 K) to 200 K rpm at 20 K rpm intervals. 5-minute tooth grinding was performed in triplicate at each speed setting. Three online real-time particle counters (ORPC; TR-8301, TongrenCo.) were placed at 3 positions (0.5, 1, and 1.5 m) to evaluate particle production. All experimental instruments were controlled remotely. The data obtained were statistically analyzed using descriptive statistics and non-parametric tests (Scheirer-Ray-Hare and Kruskal-Wallis/ Dunn-Bonferroni tests, p < 0.05).

RESULTS

The concentration level of aerosol particles production during the grinding experiment was elevated above the control group for all conditions, and increased with bur speed at any location (the maximum peak, reaching 5.59 × 107 particles/m3, at 200 K and 1 m), with differences between conditions. The effect of speed on the increment of particles across different channels compared to the control group was statistically significant among locations (p < 0.001).

CONCLUSIONS

Statistically significant particle contamination was produced using a speed-increasing handpiece, but the contamination level for each experimental condition was reduced to baseline within 30 min, and most particles with a diameter greater than 1üm produced at low speeds (80 K or lower) tended to settle within 1 m.

CLINICAL RELEVANCE

Our study suggested that the use of a speed-increasing handpiece below 80 K and 30 min of fallow time may lead to an adequate reduction in the health effects of particle contamination.

Environmental dissemination of respiratory viruses: dynamic interdependencies of respiratory droplets, aerosols, aerial particulates, environmental surfaces, and contribution of viral re-aerosolization

During the recent pandemic of COVID-19 (SARS-CoV-2), influential public health agencies such as the World Health Organization (WHO) and the U.S. Centers for Disease Control and Prevention (CDC) have favored the view that SARS CoV-2 spreads predominantly via droplets. Many experts in aerobiology have openly opposed that stance, forcing a vigorous debate on the topic. In this review, we discuss the various proposed modes of viral transmission, stressing the interdependencies between droplet, aerosol, and fomite spread. Relative humidity and temperature prevailing determine the rates at which respiratory aerosols and droplets emitted from an expiratory event (sneezing, coughing, etc.) evaporate to form smaller droplets or aerosols, or experience hygroscopic growth. Gravitational settling of droplets may result in contamination of environmental surfaces (fomites). Depending upon human, animal and mechanical activities in the occupied space indoors, viruses deposited on environmental surfaces may be re-aerosolized (re-suspended) to contribute to aerosols, and can be conveyed on aerial particulate matter such as dust and allergens. The transmission of respiratory viruses may then best be viewed as resulting from dynamic virus spread from infected individuals to susceptible individuals by various physical states of active respiratory emissions, instead of the current paradigm that emphasizes separate dissemination by respiratory droplets, aerosols or by contaminated fomites. To achieve the optimum outcome in terms of risk mitigation and infection prevention and control (IPAC) during seasonal infection peaks, outbreaks, and pandemics, this holistic view emphasizes the importance of dealing with all interdependent transmission modalities, rather than focusing on one modality.

Development and Effectiveness of the School-Based Education Program for Coping With Particulate Matter

BACKGROUND

Adolescents are considered to be vulnerable to particulate matter (PM). This study aims to develop and verify the effectiveness of the "school-based education program for coping with particulate matter (SEPC_PM)." This program was designed by employing the health belief model.

METHODS

High school students between the ages of 15 and 18 in South Korea participated in the program. This study employed a nonequivalent control group pretest-posttest design. A total of 113 students participated in the study; of these, 56 students participated in the intervention group, and 57 in the control group. The intervention group received 8 intervention sessions the SEPC_PM over the course of 4 weeks.

RESULTS

After the completion of the program, the intervention group's knowledge about PM showed a statistically significant increase (t = 4.79, p < .001). The practice of engaging in health-managing behaviors to protect against PM also showed statistically significant improvement in the intervention group, with the greatest progress in practicing precaution when outdoors (t = 2.22, p = .029). No statistically significant changes were observed regarding other dependent variables. However, a subdomain of the variable of perceived self-efficacy for engaging in health-managing behaviors to protect against PM (degree of body cleansing after returning home) demonstrated a statistically significant increase in the intervention group (t = 1.99, p = .049).

CONCLUSIONS

The SEPC_PM may be proposed for incorporation into regular high school curricula to improve students' health by encouraging them to take necessary actions against PM.

Environmental, meteorological and pandemic restriction-related variables affecting SARS-CoV-2 cases

Three years have passed since the outbreak of Coronavirus Disease 2019 (COVID-19) brought the world to standstill. In most countries, the restrictions have ended, and the immunity of the population has increased; however, the possibility of new dangerous variants emerging remains. Therefore, it is crucial to develop tools to study and forecast the dynamics of future pandemics. In this study, a generalized additive model (GAM) was developed to evaluate the impact of meteorological and environmental variables, along with pandemic-related restrictions, on the incidence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in Córdoba, Argentina. The results revealed that mean temperature and vegetation cover were the most significant predictors affecting SARS-CoV-2 cases, followed by government restriction phases, days of the week, and hours of sunlight. Although fine particulate matter (PM2.5) and NO2 were less related, they improved the model's predictive power, and a 1-day lag enhanced accuracy metrics. The models exhibited strong adjusted coefficients of determination (R2adj) but did not perform as well in terms of root-mean-square error (RMSE). This suggests that the number of cases may not be the primary variable for controlling the spread of the disease. Furthermore, the increase in positive cases related to policy interventions may indicate the presence of lockdown fatigue. This study highlights the potential of data science as a management tool for identifying crucial variables that influence epidemiological patterns and can be monitored to prevent an overload in the healthcare system.

The potential impact of PM2.5 on the covid-19 crisis in the Brazilian Amazon region

OBJECTIVE

This study aims to assess covid-19 morbidity, mortality, and severity from 2020 to 2021 in five Brazilian Amazon states with the highest records of wildfires.

METHODS

A distributed lag non-linear model was applied to estimate the potential exposure risk association with particulate matter smaller than 2.5-µm in diameter (PM2.5). Daily mean temperature, relative humidity, percentual of community mobility, number of hospital beds, days of the week, and holidays were considered in the final models for controlling the confounding factors.

RESULTS

The states of Para, Mato Grosso, and Amazonas have reported the highest values of overall cases, deaths, and severe cases of covid-19. The worrying growth in the percentual rates in 2020/2021 for the incidence, severity, and mortality were highlighted in Rondônia and Mato Grosso. The growth in 2020/2021 in the estimations of PM2.5 concentrations was higher in Mato Grosso, with an increase of 24.4%, followed by Rondônia (14.9%).

CONCLUSION

This study establishes an association between wildfire-generated PM2.5 and increasing covid-19 incidence, mortality, and severity within the studied area. The findings showed that the risk of covid-19 morbidity and mortality is nearly two times higher among individuals exposed to high concentrations of PM2.5. The attributable fraction to PM2.5 in the studied area represents an important role in the risk associated with covid-19 in the Brazilian Amazon region.

Experimental and in silico evaluations of the possible molecular interaction between airborne particulate matter and SARS-CoV-2

During the early stage of the COVID-19 pandemic (winter 2020), the northern part of Italy has been significantly affected by viral infection compared to the rest of the country leading the scientific community to hypothesize that airborne particulate matter (PM) could act as a carrier for the SARS-CoV-2. To address this controversial issue, we first verified and demonstrated the presence of SARS-CoV-2 RNA genome on PM2.5 samples, collected in the city of Bologna (Northern Italy) in winter 2021. Then, we employed classical molecular dynamics (MD) simulations to investigate the possible recognition mechanism(s) between a newly modelled PM2.5 fragment and the SARS-CoV-2 Spike protein. The potential molecular interaction highlighted by MD simulations suggests that the glycans covering the upper Spike protein regions would mediate the direct contact with the PM2.5 carbon core surface, while a cloud of organic and inorganic PM2.5 components surround the glycoprotein with a network of non-bonded interactions resulting in up to 4769 total contacts. Moreover, a binding free energy of -207.2 ± 3.9 kcal/mol was calculated for the PM-Spike interface through the MM/GBSA method, and structural analyses also suggested that PM attachment does not alter the protein conformational dynamics. Although the association between the PM and SARS-CoV-2 appears plausible, this simulation does not assess whether these established interactions are sufficiently stable to carry the virus in the atmosphere, or whether the virion retains its infectiousness after the transport. While these key aspects should be verified by further experimental analyses, for the first time, this pioneering study gains insights into the molecular interactions between PM and SARS-CoV-2 Spike protein and will support further research aiming at clarifying the possible relationship between PM abundance and the airborne diffusion of viruses.

Linkage between Airborne Particulate Matter and Viral Pandemic COVID-19 in Bucharest

The long-distance spreading and transport of airborne particulate matter (PM) of biogenic or chemical compounds, which are thought to be possible carriers of SARS-CoV-2 virions, can have a negative impact on the incidence and severity of COVID-19 viral disease. Considering the total Aerosol Optical Depth at 550 nm (AOD) as an atmospheric aerosol loading variable, inhalable fine PM with a diameter ≤2.5 µm (PM2.5) or coarse PM with a diameter ≤10 µm (PM10) during 26 February 2020-31 March 2022, and COVID-19's five waves in Romania, the current study investigates the impact of outdoor PM on the COVID-19 pandemic in Bucharest city. Through descriptive statistics analysis applied to average daily time series in situ and satellite data of PM2.5, PM10, and climate parameters, this study found decreased trends of PM2.5 and PM10 concentrations of 24.58% and 18.9%, respectively compared to the pre-pandemic period (2015-2019). Exposure to high levels of PM2.5 and PM10 particles was positively correlated with COVID-19 incidence and mortality. The derived average PM2.5/PM10 ratios during the entire pandemic period are relatively low (<0.44), indicating a dominance of coarse traffic-related particles' fraction. Significant reductions of the averaged AOD levels over Bucharest were recorded during the first and third waves of COVID-19 pandemic and their associated lockdowns (~28.2% and ~16.4%, respectively) compared to pre-pandemic period (2015-2019) average AOD levels. The findings of this research are important for decision-makers implementing COVID-19 safety controls and health measures during viral infections.

Assessing the supply chain management of waste-to-energy on green circular economy in China: an empirical study

One of the industries that makes a significant contribution to the overall amount of greenhouse gas emissions around the globe is agriculture. In this regard, the use of bioenergy in the agricultural and food processing industries might benefit from the implementation of circular economy techniques. Despite the fact that just roughly 9% of the global economy is circular, there have been worldwide efforts to improve that reality. The linear economy, commonly known as the "take-make-use-dispose" model, is in sharp contrast to the circular economy, also known as "grow-make-use-restore," which seeks to influence the flow of materials and energy in order to maximize the benefits to the environment and minimize any associated costs. Garbage-to-energy, also known as WTE, is the focus of both academics and businesses as a direct result of the increasingly diminishing number of energy supplies and the ever-increasing amount of garbage. This project intends to turn trash into profit, lessen the impact waste has on the environment, and generate energy from biowaste by conceptualizing a focus on the supply chain characteristics of waste-to-energy processing. The adoption of a waste-to-energy (WTE) supply chain as a district energy system should be a viable solution toward a circular industrial economy that can solve energy consumption, waste management, and greenhouse gas emission concerns all at once. In the framework of a "circular economy," this study investigates how the management of waste-to-energy supply chains impacts the performance of businesses. The present investigation makes use of life cycle assessments, technical innovation, waste-to-energy conversion, and capacities related to circular economies. The study makes use of data obtained from an online survey that was administered between March 2021 and November 2021 to employees of 285 representative samples drawn from 457 European enterprises and firms that have accepted the concepts of the circular economy. The data is examined using a technique known as partial least squares structural equation modeling (PLS-SEM for short). The findings indicate that waste-to-energy serves as a mediator between the life cycle assessment and the capabilities of the circular economy and that sustainable supply chain management, sustainable supply chain design, technological progress, and waste-to-energy all have positive effects on these metrics.

An updated estimation approach for SEIR models with stochastic perturbations: Application to COVID-19 data in Bogotá

This paper studies the updated estimation method for estimating the transmission rate changes over time. The models for the population dynamics under SEIR epidemic models with stochastic perturbations are analysed the dynamics of the COVID-19 pandemic in Bogotá, Colombia. We performed computational experiments to interpret COVID-19 dynamics using actual data for the proposed models. We estimate the model parameters and updated their estimates for reported infected and recovered data.

Numerical simulation of social distancing of preventing airborne transmission in open space with lateral wind direction, taking into account temperature of human body and floor surface

This paper presents the numerical results of particle propagation in open space, taking into account the temperature of the human body and the surface of the ground. And also, the settling of particles or droplets under the action of gravitational force and transport in the open air is taken into account, taking into account the temperature during the process of breathing and sneezing or coughing. The temperature of the body and the surface of the ground, different rates of particle emission from the mouth, such as breathing and coughing or sneezing, are numerically investigated. The effect of temperature, cross-inlet wind, and the velocity of particle ejection from a person's mouth on social distancing is being investigated using a numerical calculation. The variable temperature of the human body forms a thermal plume, which affects the increase in the trajectory of the particle propagation, taking into account the lateral air flow. The thermal plume affects the particles in the breathing zone and spreads the particles over long distances in the direction of the airflow. The result of this work shows that in open space, taking into account the temperature of the body and the surface of the ground, a 2-m social distance may be insufficient for the process of sneezing and social distance must be observed depending on the breathing mode.

Severe Acute Respiratory Syndrome and Particulate Matter Exposure: A Systematic Review

BACKGROUND

Particulate matter (PM) exposure is responsible for seven million deaths annually and has been implicated in the pathogenesis of respiratory infections such as severe acute respiratory syndrome (SARS). Understanding modifiable risk factors of high mortality, resource burdensome C19 and exposure risks such as PM is key to mitigating their devastating effects. This systematic review focuses on the literature available, identifying the spatial and temporal variation in the role of quantified PM exposure in SARS disease outcome and planning our future experimental studies.

METHODS

The systematic review utilized keywords adhered to the PRISMA guidelines. We included original human research studies in English.

RESULTS

Initial search yielded N = 906, application of eligibility criteria yielded N = 46. Upon analysis of risk of bias N = 41 demonstrated high risk. Studies found a positive association between elevated PM2.5, PM10 and SARS-related outcomes. A geographic and temporal variation in both PM and C19's role was observed.

CONCLUSION

C19 is a high mortality and resource intensive disease which devastated the globe. PM exposure is also a global health crisis. Our systematic review focuses on the intersection of this impactful disease-exposure dyad and understanding the role of PM is important in the development of interventions to prevent future spread of viral infections.

SARS-CoV-2 airborne transmission: a review of risk factors and possible preventative measures using air purifiers

The rapid spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and the resulting worldwide death toll have prompted worries regarding its transmission mechanisms. Direct, indirect, and droplet modes are the basic mechanisms of transmission. SARS-CoV-2 spreads by respiratory droplets (size range >10 μm size ranges), aerosols (5 μm), airborne, and particulate matter. The rapid transmission of SARS-CoV-2 is due to the involvement of tiny indoor air particulate matter (PM_2.5), which functions as a vector. SARS-CoV-2 is more contagious in the indoor environment where particulate matter floats for a longer period and greater distances. Extended residence time in the environment raises the risk of SARS-CoV-2 entering the lower respiratory tract, which may cause serious infection and possibly death. To decrease viral transmission in the indoor environment, it is essential to catch and kill the SARS-CoV-2 virus and maintain virus-free air, which will significantly reduce viral exposure concerns. Therefore, effective air filters with anti-viral, anti-bacterial, and anti-air-pollutant characteristics are gaining popularity recently. It is essential to develop cost-effective materials based on nanoparticles and metal-organic frameworks in order to lower the risk of airborne transmission in developing countries. A diverse range of materials play an important role in the manufacturing of effective air filters. We have summarized in this review article the basic concepts of the transmission routes of SARS-CoV-2 virus and precautionary measures using air purifiers with efficient materials-based air filters for the indoor environment. The performance of air-filter materials, challenges and alternative approaches, and future perspectives are also presented. We believe that air purifiers fabricated with highly efficient materials can control various air pollutants and prevent upcoming pandemics.

Association Between Weather Parameters and SARS-CoV-2 Confirmed Cases in Two South African Cities

Several approaches have been used in the race against time to mitigate the spread and impact of COVID-19. In this study, we investigated the role of temperature, relative humidity, and particulate matter in the spread of COVID-19 cases within two densely populated cities of South Africa-Pretoria and Cape Town. The role of different levels of COVID-19 restrictions in the air pollution levels, obtained from the Purple Air Network, of the two cities were also considered. Our results suggest that 26.73% and 43.66% reduction in PM2.5 levels were observed in Cape Town and Pretoria respectively for no lockdown (Level 0) to the strictest lockdown level (Level 5). Furthermore, our results showed a significant relationship between particulate matter and COVID-19 in the two cities. Particulate matter was found to be a good predictor, based on the significance of causality test, of COVID-19 cases in Pretoria with a lag of 7 days and more. This suggests that the effect of particulate matter on the number of cases can be felt after 7 days and beyond in Pretoria.

Effects of Air Pollution on Chemosensory Dysfunction in COVID-19 Patients

BACKGROUND

In some patients, coronavirus disease 2019 (COVID-19) is accompanied by loss of smell and taste, and this has been reportedly associated with exposure to air pollutants. This study investigated the relationship between the occurrence of chemosensory dysfunction in COVID-19 patients and air pollutant concentrations in Korea.

METHODS

Information on the clinical symptom of chemosensory dysfunction, the date of diagnosis, residential area, age, and sex of 60,194 confirmed COVID-19 cases reported to the Korea Disease Control and Prevention Agency from January 20 to December 31, 2020 was collected. In addition, the daily average concentration of air pollutants for a week in the patients' residential area was collected from the Ministry of Environment based on the date of diagnosis of COVID-19. A binomial logistic regression model, using age and gender, standardized smoking rate, number of outpatient visits, 24-hour mean temperature and relative humidity at the regional level as covariates, was used to determine the effect of air pollution on chemosensory dysfunction.

RESULTS

Symptoms of chemosensory dysfunction were most frequent among patients in their 20s and 30s, and occurred more frequently in large cities. The logistic analysis showed that the concentration of particulate matter 10 (PM₁₀) and 2.5 (PM_2.5) up to 2 days before the diagnosis of COVID-19 and the concentration of sulfur dioxide (SO₂), nitrogen dioxide (NO₂), carbon monoxide (CO), and ozone (O₃) at least 7 days before the diagnosis of COVID-19 affected the development of chemosensory dysfunction. In the logistic regression model adjusted for age, sex, standardized smoking rate, number of outpatient visits, and daily average temperature and relative humidity, it was found that an increase in the interquartile range of PM₁₀, PM_2.5, SO₂, NO₂, and CO on the day of diagnosis increased the incidence of chemosensory dysfunction 1.10, 1.10, 1.17, 1.31, and 1.19-fold, respectively. In contrast, the O₃ concentration had a negative association with chemosensory dysfunction.

CONCLUSION

High concentrations of air pollutants such as PM₁₀, PM_2.5, SO₂, NO₂, and CO on the day of diagnosis increased the risk of developing chemosensory dysfunction from COVID-19 infection. This result underscores the need to actively prevent exposure to air pollution and prevent COVID-19 infection. In addition, policies that regulate activities and products that create high amounts of harmful environmental wastes may help in promoting better health for all during COVID-19 pandemic.

Water-based air purifier with ventilation fan system: a novel approach for cleaning indoor/outdoor transitional air during the pandemic

Abstract

This article presents the design and fabrication of an air purifier that uses a water-based technique to clean indoor/outdoor transitional air to provide a low-tech air purifier against the annual smog crisis and the ongoing COVID-19 pandemic. The air purifier was designed and built. All tests were conducted in a closed room as well as a semi-outdoor area. Particle sizes of PM0.3, 0.5, 1.0, 3.0, 5.0, and 10 μm (particle/m³) were measured at an air inlet, air outlet, 2 m from an air inlet, and 4 m from an air outlet after 0, 5, 10, 15, and 20 min of air treatment, respectively, as well as CO₂ levels and relative humidity (RH). The average airflow rate was also measured. When compare to 0 min, all parameters, except semi-outdoor PM0.3 and CO₂ levels, tend to decrease in both indoor and semi-outdoor conditions. When measure by total airflow specification of a dual ventilation fan, the average airflow rate at an air outlet is reduced by 20 times.

Article Highlights

Design and fabrication of a water-based air purifier.

A low-tech air purifier helping to protect against the annual smog crisis and the ongoing COVID-19 pandemic.

The novel water-based air purifier effectively traps air particles ranging in size from 0.5 to 10 µm.

Cumulative effects of air pollution and climate drivers on COVID-19 multiwaves in Bucharest, Romania

Over more than two years of global health crisis due to ongoing COVID-19 pandemic, Romania experienced a five-wave pattern. This study aims to assess the potential impact of environmental drivers on COVID-19 transmission in Bucharest, capital of Romania during the analyzed epidemic period. Through descriptive statistics and cross-correlation tests applied to time series of daily observational and geospatial data of major outdoor inhalable particulate matter with aerodynamic diameter ≤ 2.5 µm (PM2.5) or ≤ 10 µm (PM10), nitrogen dioxide (NO2), ozone (O3), sulfur dioxide (SO2), carbon monoxide (CO), Aerosol Optical Depth at 550 nm (AOD) and radon (222Rn), we investigated the COVID-19 waves patterns under different meteorological conditions. This study examined the contribution of individual climate variables on the ground level air pollutants concentrations and COVID-19 disease severity. As compared to the long-term average AOD over Bucharest from 2015 to 2019, for the same year periods, this study revealed major AOD level reduction by ~28 % during the spring lockdown of the first COVID-19 wave (15 March 2020-15 May 2020), and ~16 % during the third COVID-19 wave (1 February 2021-1 June 2021). This study found positive correlations between exposure to air pollutants PM2.5, PM10, NO2, SO2, CO and 222Rn, and significant negative correlations, especially for spring-summer periods between ground O3 levels, air temperature, Planetary Boundary Layer height, and surface solar irradiance with COVID-19 incidence and deaths. For the analyzed time period 1 January 2020-1 April 2022, before and during each COVID-19 wave were recorded stagnant synoptic anticyclonic conditions favorable for SARS-CoV-2 virus spreading, with positive Omega surface charts composite average (Pa/s) at 850 mb during fall- winter seasons, clearly evidenced for the second, the fourth and the fifth waves. These findings are relevant for viral infections controls and health safety strategies design in highly polluted urban environments.

Impacts of exposure to air pollution, radon and climate drivers on the COVID-19 pandemic in Bucharest, Romania: A time series study

During the ongoing global COVID-19 pandemic disease, like several countries, Romania experienced a multiwaves pattern over more than two years. The spreading pattern of SARS-CoV-2 pathogens in the Bucharest, capital of Romania is a multi-factorial process involving among other factors outdoor environmental variables and viral inactivation. Through descriptive statistics and cross-correlation analysis applied to daily time series of observational and geospatial data, this study aims to evaluate the synergy of COVID-19 incidence and lethality with air pollution and radon under different climate conditions, which may exacerbate the coronavirus' effect on human health. During the entire analyzed period 1 January 2020-21 December 2021, for each of the four COVID-19 waves were recorded different anomalous anticyclonic synoptic meteorological patterns in the mid-troposphere, and favorable stability conditions during fall-early winter seasons for COVID-19 disease fast-spreading, mostly during the second, and the fourth waves. As the temporal pattern of airborne SARS-CoV-2 and its mutagen variants is affected by seasonal variability of the main air pollutants and climate parameters, this paper found: 1) the daily outdoor exposures to air pollutants (particulate matter PM2.5 and PM10, nitrogen dioxide-NO₂, sulfur dioxide-SO₂, carbon monoxide-CO) and radon - ²²²Rn, are directly correlated with the daily COVID-19 incidence and mortality, and may contribute to the spread and the severity of the pandemic; 2) the daily ground ozone-O₃ levels, air temperature, Planetary Boundary Layer height, and surface solar irradiance are anticorrelated with the daily new COVID-19 incidence and deaths, averageingful for spring-summer periods. Outdoor exposure to ambient air pollution associated with radon is a non-negligible driver of COVID-19 transmission in large metropolitan areas, and climate variables are risk factors in spreading the viral infection. The findings of this study provide useful information for public health authorities and decision-makers to develop future pandemic diseases strategies in high polluted metropolitan environments.

Importance of Punctual Monitoring to Evaluate the Health Effects of Airborne Particulate Matter

Particulate matter (PM) pollution is one of the major public health problems worldwide, given the high mortality attributable to exposure to PM pollution and the high pathogenicity that is found above all in the respiratory, cardiovascular, and neurological systems. The main sources of PM pollution are the daily use of fuels (wood, coal, organic residues) in appliances without emissions abatement systems, industrial emissions, and vehicular traffic. This review aims to investigate the causes of PM pollution and classify the different types of dust based on their size. The health effects of exposure to PM will also be discussed. Particular attention is paid to the measurement method, which is unsuitable in the risk assessment process, as the evaluation of the average PM compared to the evaluation of PM with punctual monitoring significantly underestimates the health risk induced by the achievement of high PM values, even for limited periods of time.

Factors Modulating COVID-19: A Mechanistic Understanding Based on the Adverse Outcome Pathway Framework

Addressing factors modulating COVID-19 is crucial since abundant clinical evidence shows that outcomes are markedly heterogeneous between patients. This requires identifying the factors and understanding how they mechanistically influence COVID-19. Here, we describe how eleven selected factors (age, sex, genetic factors, lipid disorders, heart failure, gut dysbiosis, diet, vitamin D deficiency, air pollution and exposure to chemicals) influence COVID-19 by applying the Adverse Outcome Pathway (AOP), which is well-established in regulatory toxicology. This framework aims to model the sequence of events leading to an adverse health outcome. Several linear AOPs depicting pathways from the binding of the virus to ACE2 up to clinical outcomes observed in COVID-19 have been developed and integrated into a network offering a unique overview of the mechanisms underlying the disease. As SARS-CoV-2 infectibility and ACE2 activity are the major starting points and inflammatory response is central in the development of COVID-19, we evaluated how those eleven intrinsic and extrinsic factors modulate those processes impacting clinical outcomes. Applying this AOP-aligned approach enables the identification of current knowledge gaps orientating for further research and allows to propose biomarkers to identify of high-risk patients. This approach also facilitates expertise synergy from different disciplines to address public health issues.

Transmission of COVID-19 pandemic (Turkey) associated with short-term exposure of air quality and climatological parameters

The study aims to investigate associations between air pollution, climate parameters, and the diffusion of COVID-19-confirmed cases in Turkey using Spearman's correlation test as an empirical methodology by Statgraphics Centurion XVI (version 16.1) and to determine the risk factors accelerating the spread of SARS-CoV-2 virus. The present study demonstrates the strong impacts of air pollutants and weather conditions on the transmission of COVID-19 morbidity. Particularly, O3 and PM10 from air quality parameters exhibited the strongest correlation with the number of daily cases in Kütahya (rs = -0.62; p < 0.05) and Sivas (rs = -0.62; p < 0.05) provinces, respectively. In meteorological parameters, rainfall showed the highest impact (rs = 0.76; p < 0.05) on the number of daily COVID-19 cases in Denizli distinct. Moreover, this study suggested that the diffusion of the novel coronavirus SARS-CoV-2 in regions with high levels of air pollution and low wind speed is dominant. To prevent the negative effects of the future pandemic crisis on public health and economic systems, manifold implications to encourage strategies to reduce air pollution in the polluted region such as being prevalent the usage of renewable energy technologies in particular electricity generation and sustainable policies such as improving the health system should be implemented by decision-makers.

Photoelectrochemical oxidation assisted air purifiers; perspective as potential tools to control indoor SARS-CoV-2 Exposure

Coronavirus diseases 2019 (COVID-19), a viral infection pandemic, arises due to easy human-to-human transmission of severe acute respiratory syndrome coronavirus (SARS-CoV-2). The SARS-CoV-2 causes severe respiratory disorders and other life-threatening diseases (during/post-infection) such as black mold disease, diabetes, cardiovascular, and neurological disorders/diseases. COVID-19 infection emerged challenging to control as SARS-CoV-2 transmits through respiratory droplets (> 10 µm size range), aerosols (< 5 µm), airborne, and particulate matter (PM_1.0 PM_2.5 and PM_10.0). SARS-CoV-2 is more infective in indoor premises due to aerodynamics where droplets, aerosols, and PM_1.0/2.5/10.0 float for a longer time and distance leading to a higher probability of it entering upper and lower respiratory tracts. To avoid human-to-human transmission, it is essential to trap and destroy SARS-CoV-2 from the air and provide virus-free air that will significantly reduce indoor viral exposure concerns. In this process, an efficient nano-enable photoelectrochemical oxidation (PECO, a destructive approach to neutralize bio-organism) assisted air purification is undoubtedly a good technological choice. This technical perspective explores the role of PECO-assisted Air-Purifiers (i.e., Molekule as a focus example for proof-of-concept) to trap and destroy indoor microorganisms (bacteria and viruses including Coronaviruses), molds, and allergens, and other indoor air pollutants, such as volatile organic compounds (VOCs) and PM_1.0/2.5/10.0. It is observed through various standard and non-standard tests that stimuli-responsive nanomaterials coated filter technology traps and destroys microbial particles. Due to technological advancements according to premises requirements and high-performance desired outcomes, Molekule air purifiers, Air Pro Air -Rx, Air Mini, and Air Mini+, have received Food and Drug Administration (FDA) clearance as a Class II medical device for the destruction of bacteria and viruses.

Effects of short-term ambient particulate matter exposure on the risk of severe COVID-19

OBJECTIVES

Previous studies have suggested a relationship between outdoor air pollution and the risk of coronavirus disease 2019 (COVID-19). However, there is a lack of data related to the severity of disease, especially in China. This study aimed to explore the association between short-term exposure to outdoor particulate matter (PM) and the risk of severe COVID-19.

METHODS

We recruited patients diagnosed with COVID-19 during a recent large-scale outbreak in eastern China caused by the Delta variant. We collected data on meteorological factors and ambient air pollution during the same time period and in the same region where the cases occurred and applied a generalized additive model (GAM) to analyze the effects of short-term ambient PM exposure on the risk of severe COVID-19.

RESULTS

A total of 476 adult patients with confirmed COVID-19 were recruited, of which 42 (8.82%) had severe disease. With a unit increase in PM10, the risk of severe COVID-19 increased by 81.70% (95% confidence interval [CI]: 35.45, 143.76) at a lag of 0-7 days, 86.04% (95% CI: 38.71, 149.53) at a lag of 0-14 days, 76.26% (95% CI: 33.68, 132.42) at a lag of 0-21 days, and 72.15% (95% CI: 21.02, 144.88) at a lag of 0-28 days. The associations remained significant at lags of 0-7 days, 0-14 days, and 0-28 days in the multipollutant models. With a unit increase in PM2.5, the risk of severe COVID-19 increased by 299.08% (95% CI: 92.94, 725.46) at a lag of 0-7 days, 289.23% (95% CI: 85.62, 716.20) at a lag of 0-14 days, 234.34% (95% CI: 63.81, 582.40) at a lag of 0-21 days, and 204.04% (95% CI: 39.28, 563.71) at a lag of 0-28 days. The associations were still significant at lags of 0-7 days, 0-14 days, and 0-28 days in the multipollutant models.

CONCLUSIONS

Our results indicated that short-term exposure to outdoor PM was positively related to the risk of severe COVID-19, and that reducing air pollution may contribute to the control of COVID-19.

Influence of meteorological patterns on the 2020 COVID-19 pandemic in the Mexico City region

Meteorology is a critical factor affecting respiratory infectious diseases such as MERS, SARS, and influenza, but its effect on the spread of the COVID-19 disease remains controversial. Nevertheless, since the infected people cough-jets produce plumes of droplets and aerosols that can travel for several meters in the atmosphere, the possible influence of wind circulation and atmospheric turbulence on the infectious plume's fate cannot be ignored. This paper applied cluster analysis for identifying the near surface wind circulation patterns and associated temperature and humidity distributions in the Mexico City Metropolitan Area (MCMA), then their influence on the spread of the COVID-19 disease during the 2020 pandemic was discussed. Meteorology data and daily numbers of confirmed COVID-19 infections were obtained from public sources. An intense infection activity occurred from October to December 2020, and notable spreading of the disease toward the southwest and south MCMA was observed. In the same period, temperature and humidity conditions that could favor the virus stability and replication were detected in the same sectors, besides 60% of the wind observations revealed considerable northerly components. These findings suggested the existence of correlations between both phenomena. For assessing the possible relationship, the Pearson coefficients between the daily confirmed infections and the temperature and inward flux were estimated, and values from -0.32 to -0.55 and 0.62 to 0.70 were obtained. Correlation was negligible for relative humidity. Multilinear regression for the daily infections in response to the meteorological variables produced coefficients of determination from 0.3839 to 0.6138. Because of its implications for public health, this topic deserves a more in-depth investigation.

COVID-19 Prediction using Genomic Footprint of SARS-CoV-2 in Air, Surface Swab and Wastewater Samples

Importance

Genomic footprints of pathogens shed by infected individuals can be traced in environmental samples. Analysis of these samples can be employed for noninvasive surveillance of infectious diseases.

Objective

To evaluate the efficacy of environmental surveillance of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) for predicting COVID-19 cases in a college dormitory.

Design

Using a prospective experimental design, air, surface swabs, and wastewater samples were collected from a college dormitory from March to May 2021. Students were randomly screened for COVID-19 during the study period. SARS-CoV-2 in environmental samples was concentrated with electronegative filtration and quantified using Volcano 2 nd Generation-qPCR. Descriptive analyses were conducted to examine the associations between time-lagged SARS-CoV-2 in environmental samples and clinically diagnosed COVID-19 cases.

Setting

This study was conducted in a residential dormitory at the University of Miami, Coral Gables campus, FL, USA. The dormitory housed about 500 students.

Participants

Students from the dormitory were randomly screened, for COVID-19 for 2-3 days / week while entering or exiting the dormitory.

Main Outcome

Clinically diagnosed COVID-19 cases were of our main interest. We hypothesized that SARS-CoV-2 detection in environmental samples was an indicator of the presence of local COVID-19 cases in the dormitory, and SARS-CoV-2 can be detected in the environmental samples several days prior to the clinical diagnosis of COVID-19 cases.

Results

SARS-CoV-2 genomic footprints were detected in air, surface swab and wastewater samples on 52 (63.4%), 40 (50.0%) and 57 (68.6%) days, respectively, during the study period. On 19 (24%) of 78 days SARS-CoV-2 was detected in all three sample types. Clinically diagnosed COVID-19 cases were reported on 11 days during the study period and SARS-CoV-2 was also detected two days before the case diagnosis on all 11 (100%), 9 (81.8%) and 8 (72.7%) days in air, surface swab and wastewater samples, respectively.

Conclusion

Proactive environmental surveillance of SARS-CoV-2 or other pathogens in a community/public setting has potential to guide targeted measures to contain and/or mitigate infectious disease outbreaks.

Key Points

Question: How effective is environmental surveillance of SARS-CoV-2 in public places for early detection of COVID-19 cases in a community?Findings: All clinically confirmed COVID-19 cases were predicted with the aid of 2 day lagged SARS-CoV-2 in environmental samples in a college dormitory. However, the prediction efficiency varied by sample type: best prediction by air samples, followed by wastewater and surface swab samples. SARS-CoV-2 was also detected in these samples even on days without any reported cases of COVID-19, suggesting underreporting of COVID-19 cases.Meaning: SARS-CoV-2 can be detected in environmental samples several days prior to clinical reporting of COVID-19 cases. Thus, proactive environmental surveillance of microbiome in public places can serve as a mean for early detection of location-time specific outbreaks of infectious diseases. It can also be used for underreporting of infectious diseases.

"SARS-CoV-2 is transmitted by particulate air pollution": Misinterpretations of statistical data, skewed citation practices, and misuse of specific terminology spreading the misconception

In epidemiology, there are still outdated myths associated with the spread of respiratory infections. Recently, we have witnessed the origination of a new misconception, to the effect that SARS-CoV-2 is transmitted in the open air by way of particulate air pollution (atmospheric particulate matter (PM)). There is no evidence to support the idea behind this misconception. Nevertheless, more and more people are involved in animated debate and the number of studies concerning atmospheric PM as a carrier of SARS-CoV-2 is growing rapidly. In this work, the origin of the misconception was investigated, and the published papers which have contributed to the spread of this myth were analyzed. The results show that the following factors lie behind the origin and spread of the misconception: a) The specific terminology is not always clearly defined or consistently used by scientists. In particular, the terms 'particulate matter', 'atmospheric aerosol particles', 'air pollutants', and 'atmospheric aerosols' need to be clarified, and besides they are often equated to 'infectious aerosols', 'virus-bearing aerosols', 'bio-aerosols', 'virus-laden particles', 'respiratory aerosol/droplets', and 'droplet nuclei'. b) Authors misinterpret statistical data and information from other sources. Interpretation of the correlation between PM levels and the increasing incidence and severity of COVID-19 infection, is often changed from "PM may reflect the indirect action of certain atmospheric conditions that maintain infectious nuclei suspended for prolonged periods, parameters that also act on atmospheric pollutants" to "PM could cause an increase in infectious droplets/aerosols containing SARS-CoV-2." This is a dramatic change to the meaning. Moreover, it is often not taken into account that PM may reflect activities in areas with high population density and this population density at the same time contributes to the spread COVID-19. c) Skewed citation practices. Many authors cite a hypothetical conclusion from an original study, then other authors cite the papers of these authors as primary sources. This practice leads to the effect that there are many witnesses to a 'phenomenon' that did not ever occur. Thus, the terminology used in interdisciplinary communications should be more nuanced and defined precisely. Authors should be more careful when citing unconfirmed data (and hypotheses) as well as in interpreting statistical data so as to avoid confusion and spreading false information. This is especially important now in the era of the COVID-19 pandemic.

Social disparities in the first wave of COVID-19 incidence rates in Germany: a county-scale explainable machine learning approach

OBJECTIVES

Knowledge about the socioeconomic spread of the first wave of COVID-19 infections in Germany is scattered across different studies. We explored whether COVID-19 incidence rates differed between counties according to their socioeconomic characteristics using a wide range of indicators.

DATA AND METHOD

We used data from the Robert Koch-Institute (RKI) on 204 217 COVID-19 diagnoses in the total German population of 83.1 million, distinguishing five distinct periods between 1 January and 23 July 2020. For each period, we calculated age-standardised incidence rates of COVID-19 diagnoses on the county level and characterised the counties by 166 macro variables. We trained gradient boosting models to predict the age-standardised incidence rates with the macrostructures of the counties and used SHapley Additive exPlanations (SHAP) values to characterise the 20 most prominent features in terms of negative/positive correlations with the outcome variable.

RESULTS

The first COVID-19 wave started as a disease in wealthy rural counties in southern Germany and ventured into poorer urban and agricultural counties during the course of the first wave. High age-standardised incidence in low socioeconomic status (SES) counties became more pronounced from the second lockdown period onwards, when wealthy counties appeared to be better protected. Features related to economic and educational characteristics of the young population in a county played an important role at the beginning of the pandemic up to the second lockdown phase, as did features related to the population living in nursing homes; those related to international migration and a large proportion of foreigners living in a county became important in the postlockdown period.

CONCLUSION

High mobility of high SES groups may drive the pandemic at the beginning of waves, while mitigation measures and beliefs about the seriousness of the pandemic as well as the compliance with mitigation measures may put lower SES groups at higher risks later on.

Interactions of chemical components in ambient PM2.5 with influenza viruses

The significance of this work is that ambient PM_2.5 is a direct transmission mode for influenza virus infection to the human alveolar epithelium. The concentration of PM_2.5 was 11.7 ± 5.5 μg/m³ in Taipei during 24 December 2019-13 January 2020. Approximately 79% of inhaled PM_2.5 is able to reach the upper-to-lower airway, and 47% of PM_2.5 is able to reach the alveolar epithelium for influenza virus infection. Influenza A and B viruses were detected in PM_2.5 on 9 days, and the influenza A/H5 virus was detected on 15 days during the study period. FL and Pyr were negatively correlated with the influenza A virus. D(ah)P and Acp were positively correlated with the influenza B and A/H5 viruses, respectively. Cd, V, and Zn were positively correlated with the influenza A, B, and A/H5 viruses, respectively. Next, influenza A, B, and A/H5 viral plasmids interacted with carbon black, H₂O₂, DEPs, and UD. We observed that H₂O₂ significantly decreased levels of complementary DNA of the three influenza viruses. DEPs and UD significantly decreased influenza A and A/H5 viral levels. In conclusion, chemicals in PM_2.5 may play vital roles in terms of viable influenza virus in the atmosphere.

COVID-19 mortality and exposure to airborne PM2.5: A lag time correlation

COVID-19 has escalated into one of the most serious crises in the 21st Century. Given the rapid spread of SARS-CoV-2 and its high mortality rate, here we investigate the impact and relationship of airborne PM_2.5 to COVID-19 mortality. Previous studies have indicated that PM_2.5 has a positive relationship with the spread of COVID-19. To gain insights into the delayed effect of PM_2.5 concentration (μgm^-3) on mortality, we focused on the role of PM_2.5 in Wuhan City in China and COVID-19 during the period December 27, 2019 to April 7, 2020. We also considered the possible impact of various meteorological factors such as temperature, precipitation, wind speed, atmospheric pressure and precipitation on pollutant levels. The results from the Pearson's correlation coefficient analyses reveal that the population exposed to higher levels of PM_2.5 pollution are susceptible to COVID-19 mortality with a lag time of >18 days. By establishing a generalized additive model, the delayed effect of PM_2.5 on the death toll of COVID-19 was verified. A negative correction was identified between temperature and number of COVID-19 deaths, whereas atmospheric pressure exhibits a positive correlation with deaths, both with a significant lag effect. The results from our study suggest that these epidemiological relationships may contribute to the understanding of the COVID-19 pandemic and provide insights for public health strategies.

BCG vaccination and the risk of COVID 19: A possible correlation

Bacillus Calmette-Guérin (BCG) vaccine is currently used to prevent tuberculosis infection. The vaccine was found to enhance resistance to certain types of infection including positive sense RNA viruses. The current COVID-19 pandemic is caused by positive sense RNA, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). A higher mortality rate of COVID-19 patients was reported in countries where BCG vaccination is not routinely administered, when compared to the vaccinated ones. We hypothesized that BCG vaccine may control SARS-CoV2 infection via modulating the monocyte immune response. We analyzed GSE104149 dataset to investigate whether human monocytes of BCG-vaccinated individuals acquire resistance to SARS-CoV-2 infection. Differentially expressed genes obtained from the dataset were used to determine enriched pathways, biological processes, and molecular functions for monocytes post BCG vaccination. Our data show that BCG vaccine promotes a more effective immune response of monocytes against SARS-CoV2, but probably not sufficient to prevent the infection.

Air quality evaluation during COVID-19 in Southern Italy: the case study of Avellino city

The present study relies on the air quality evaluation during COVID-19 pandemic in Avellino, described in the last years and for several consecutive years, among the worst Italian cities in this context. The main purpose of this manuscript was to investigate the effects of quarantine and lockdown measures on air pollution. The concentrations of the main atmospheric pollutants (Carbon monoxide (CO), Ozone (O₃), Fine Particulate (PM_2.5 and PM₁₀), Benzene (C₆H₆) and Nitrogen dioxide (NO₂) were recorded during the period January-December 2020 using two stationary monitoring stations (AV1 and AV2) of the Regional Environmental Protection Agency (ARPAC). During the lockdown period (March 9-May 18, 2020), results indicated significant reductions only in the levels of CO, benzene and NO₂, while for PM₁₀ the limit of 50 μg m^-3 was passed 8 times for AV1 and 13 times for AV2. The results showed the not predominant role of traffic on air quality in Avellino regards to PM levels and make it necessary a serious reflection about important and not extendable decisions to improve the air quality.

Assessing the impact of air pollution and climate seasonality on COVID-19 multiwaves in Madrid, Spain

While the COVID-19 pandemic is still in progress, being under the fifth COVID-19 wave in Madrid, over more than one year, Spain experienced a four wave pattern. The transmission of SARS-CoV-2 pathogens in Madrid metropolitan region was investigated from an urban context associated with seasonal variability of climate and air pollution drivers. Based on descriptive statistics and regression methods of in-situ and geospatial daily time series data, this study provides a comparative analysis between COVID-19 waves incidence and mortality cases in Madrid under different air quality and climate conditions. During analyzed period 1 January 2020-1 July 2021, for each of the four COVID-19 waves in Madrid were recorded anomalous anticyclonic synoptic meteorological patterns in the mid-troposphere and favorable stability conditions for COVID-19 disease fast spreading. As airborne microbial temporal pattern is most affected by seasonal changes, this paper found: 1) a significant negative correlation of air temperature, Planetary Boundary Layer height, and surface solar irradiance with daily new COVID-19 incidence and deaths; 2) a similar mutual seasonality with climate variables of the first and the fourth COVID-waves from spring seasons of 2020 and 2021 years. Such information may help the health decision makers and public plan for the future.

Short-term air pollution exposure and COVID-19 infection in the United States

The Sars-CoV-2 disease (known as COVID-19) has become a global public health emergency. Researchers have been unveiling the transmission mechanisms and disclosing possible contributing factors. Studies have theorized plausible linkage mechanisms between air pollution exposure and COVID-19 infection and have divided the air pollution exposure into two types: long-term exposure and short-term exposure. However, present studies on impacts of short-term exposure have not reached a conclusive result and are mostly focusing on Asian and European countries. In this study, we conduct a nationwide analysis to examine the association between short-term air pollution exposure and COVID-19 infection in the United States. Daily confirmed cases, air pollution information, and meteorological factors at the county level were collected between March 1st and June 30th, 2020. A total of 806 (out of 3143) counties were included in this study, with 554 counties for PM2.5 and 670 counties for ozone (O3), which account for around 2.1 million cumulative confirmed cases, i.e., about 80% of all confirmed cases in the U.S. over the study period. A generalized additive model was applied to investigate the relationship between short-term exposure to PM2.5/O3 and COVID-19 confirmed cases. The statistically significant results indicate that, with every 10 μg/m3 increase in mean pollutant concentration, the number of daily confirmed cases increases by 9.41% (CI: 8.77%-10.04%) for PM2.5 and by 2.42% (CI: 1.56%-3.28%) for O3. The relative risks associated with short-term PM2.5 exposure remain positive after isolating the impacts of long-term exposure. The results of this study suggest that short-term exposure to air pollution, especially to PM2.5, may contribute to the spread and course of the pandemic. This finding has important implications for policymakers and the public to take preventive measures such as staying at home on polluted days while improving ventilation indoors to lower the probability of infection.

Positive association between outdoor air pollution and the incidence and severity of COVID-19. A review of the recent scientific evidences

In June 2020, we published a review focused on assessing the influence of various air pollutants on the transmission of SARS-CoV-2, and the severity of COVID-19 in patients infected by the coronavirus. The results of most of those reviewed studies suggested that chronic exposure to certain air pollutants might lead to more severe and lethal forms of COVID-19, as well as delays/complications in the recovery of the patients. Since then, a notable number of studies on this topic have been published, including also various reviews. Given the importance of this issue, we have updated the information published since our previous review. Taking together the previous results and those of most investigations now reviewed, we have concluded that there is a significant association between chronic exposure to various outdoor air pollutants: PM2.5, PM10, O3, NO2, SO2 and CO, and the incidence/risk of COVID-19 cases, as well as the severity/mortality of the disease. Unfortunately, studies on the potential influence of other important air pollutants such as VOCs, dioxins and furans, or metals, are not available in the scientific literature. In relation to the influence of outdoor air pollutants on the transmission of SARS-CoV-2, although the scientific evidence is much more limited, some studies point to PM2.5 and PM10 as potential airborne transmitters of the virus. Anyhow, it is clear that environmental air pollution plays an important negative role in COVID-19, increasing its incidence and mortality.

The impact of coal combustion, nitrous oxide emissions, and traffic emissions on COVID-19 cases: a Markov-switching approach

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spread to more than 200 countries with a current case fatality ratio (CFR) of more than 2% globally. The concentration of air pollutants is considered a critical factor responsible for transmitting coronavirus disease among the masses. The photochemical process and coal combustions create respiratory disorders that lead to coronavirus disease. Based on the crucial fact, the study evaluated the impact of nitrous oxide (N₂O) emissions, coal combustion, and traffic emissions on COVID-19 cases in a panel of 39 most affected countries of the world. These three air pollution factors are considered to form a lethal smog that negatively affects the patient's respiratory system, leading to increased susceptibility to coronavirus worldwide. The study used the Markov two-step switching regime regression model for obtaining parameter estimates. In contrast, an innovation accounting matrix is used to assess smog factors' intensity on possibly increasing coronavirus cases over time. The results show that N₂O emissions, coal combustion, and traffic emissions increase COVID-19 cases in regime-1. On the other hand, N2O emissions significantly increase coronavirus cases in regime-2. The innovation accounting matrix shows that N2O emissions would likely have a more significant share of increasing coronavirus cases with a variance of 33.902%, followed by coal combustion (i.e., 6.643%) and traffic emissions (i.e., 2.008%) over the time horizon. The study concludes that air quality levels should be maintained through stringent environmental policies, such as carbon pricing, sustainable urban planning, green technology advancement, renewable fuels, and pollution less accessible vehicles. All these measures would likely decrease coronavirus cases worldwide.

Exercising under particulate matter exposure: Providing theoretical support for lung deposition and its relationship with COVID-19

The aim of the present study was to investigate lung particulate matter (PM) deposition during endurance exercise and provide a new insight concerning how SARS-CoV-2 could be carried into the respiratory tract. The anatomical and physiological characteristics of the Human Respiratory Tract model were considered for modeling the lung PM deposition during exercise. The Monte Carlo method was performed to randomly generate different values of PM concentrations (1.0, 2.5, and 10.0 μm), minute ventilation, and duration of exercise at moderate, heavy, and severe exercise intensity domains. Compared to moderate and severe intensities, during heavy exercise (75-115 L‧min-1, duration of 10.0-60.0 min) there is greater lung deposition in the bronchiolar region (p < 0.01). In turn, there is greater deposition per minute of exercise at the severe intensity domain (115.0-145.0 L‧min^-1, duration of 10.0-20.0 min, p < 0.01). Considering that SARs-CoV-2 could be adsorbed on the particles, exercising under PM exposure, mainly at the severe domain, could be harmful concerning the virus. In conclusion, beyond the traditional minute ventilation assumption, there is a time vs intensity dependence for PM deposition, whereby the severe domain presents greater deposition per minute of exercise. The results observed for PM deposition are alarming since SARs-CoV-2 could be adsorbed by particles and carried into the deeper respiratory tract.

Probable aerosol transmission of SARS-CoV-2 in a poorly ventilated courtroom

There is increasing evidence of SARS-CoV-2 transmission via aerosol; the number of cases of transmission via this route reported in the literature remains however limited. This study examines a case of clustering that occurred in a courtroom, in which 5 of the 10 participants were tested positive within days of the hearing. Ventilation loss rates and dispersion of fine aerosols were measured through CO₂ injections and lactose aerosol generation. Emission rate and influencing parameters were then computed using a well-mixed dispersion model. The emission rate from the index case was estimated at 130 quanta h^-1 (interquartile (97-155 quanta h^-1 ). Measured lactose concentrations in the room were found relatively homogenous (n = 8, mean 336 µg m^-3 , SD = 39 µg m^-3 ). Air renewal was found to play an important role for event durations greater than 0.5 h and loss rate below 2-3 h^-1 . The estimated emission rate suggests a high viral load in the index case and/or a high SARS-CoV-2 infection coefficient. High probabilities of infection in similar indoor situations are related to unfavorable conditions of ventilation, emission rate, and event durations. Source emission control appears essential to reduce aerosolized infection in events lasting longer than 0.5 h.

PM2.5, NO2, wildfires, and other environmental exposures are linked to higher Covid 19 incidence, severity, and death rates

Numerous studies have linked outdoor levels of PM_2.5, PM₁₀, NO₂, O₃, SO₂, and other air pollutants to significantly higher rates of Covid 19 morbidity and mortality, although the rate in which specific concentrations of pollutants increase Covid 19 morbidity and mortality varies widely by specific country and study. As little as a 1-μg/m³ increase in outdoor PM_2.5 is estimated to increase rates of Covid 19 by as much as 0.22 to 8%. Two California studies have strongly linked heavy wildfire burning periods with significantly higher outdoor levels of PM_2.5 and CO as well as significantly higher rates of Covid 19 cases and deaths. Active smoking has also been strongly linked significantly increased risk of Covid 19 severity and death. Other exposures possibly related to greater risk of Covid 19 morbidity and mortality include incense, pesticides, heavy metals, dust/sand, toxic waste sites, and volcanic emissions. The exact mechanisms in which air pollutants increase Covid 19 infections are not fully understood, but are probably related to pollutant-related oxidation and inflammation of the lungs and other tissues and to the pollutant-driven alternation of the angiotensin-converting enzyme 2 in respiratory and other cells.

International trade as critical parameter of COVID-19 spread that outclasses demographic, economic, environmental, and pollution factors

The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that caused the Coronavirus Disease 2019 (COVID-19), generating high numbers of COVID-19 related infected individuals and deaths, is still circulating in 2021 with new variants of the coronavirus, such that the state of emergency remains in manifold countries. Currently, there is still a lack of a full understanding of the factors determining the COVID-19 diffusion that clarify the causes of the variability of infections across different provinces and regions within countries. The main goal of this study is to explain new and main determinants underlying the diffusion of COVID-19 in society. This study focuses on international trade because this factor, in a globalized world, can synthetize different drivers of virus spread, such as mobility patterns, economic potentialities, and social interactions of an investigated areas. A case study research is performed on 107 provinces of Italy, one of the first countries to experience a rapid increase in confirmed cases and deaths. Statistical analyses from March 2020 to February 2021 suggest that total import and export of provinces has a high association with confirmed cases over time (average r > 0.78, p-value <.001). Overall, then, this study suggests total import and export as complex indicator of COVID-19 transmission dynamics that outclasses other common parameters used to justify the COVID-19 spread, given by economic, demographic, environmental, and climate factors. In addition, this study proposes, for the first time, a time-dependent correlation analysis between trade data and COVID-19 infection cases to explain the relation between confirmed cases and social interactions that are a main source of the diffusion of SARS-CoV-2 and subsequent negative impact in society. These novel findings have main theoretical and practical implications directed to include a new parameter in modelling of the diffusion of COVID-19 pandemic to support effective policy responses of crisis management directed to constrain the impact of COVID-19 pandemic and similar infectious diseases in society.

The role of airborne particles and environmental considerations in the transmission of SARS-CoV-2

Corona Virus Disease 2019 (COVID-19) caused by the novel coronavirus, results in an acute respiratory condition coronavirus 2 (SARS-CoV-2) and is highly infectious. The recent spread of this virus has caused a global pandemic. Currently, the transmission routes of SARS-CoV-2 are being established, especially the role of environmental transmission. Here we review the environmental transmission routes and persistence of SARS-CoV-2. Recent studies have established that the transmission of this virus may occur, amongst others, in the air, water, soil, cold-chain, biota, and surface contact. It has also been found that the survival potential of the SARS-CoV-2 virus is dependent on different environmental conditions and pollution. Potentially important pathways include aerosol and fecal matter. Particulate matter may also be a carrier for SARS-CoV-2. Since microscopic particles can be easily absorbed by humans, more attention must be focused on the dissemination of these particles. These considerations are required to evolve a theoretical platform for epidemic control and to minimize the global threat from future epidemics.

Exploring the Interrelationship between COVID-19 Phobia, Work–Family Conflict, Family–Work Conflict, and Life Satisfaction among School Administrators for Advancing Sustainable Management

This study aims to investigate the relationships between the COVID-19 phobia experienced by school administrators and their work–family conflict, family–work conflict, and life satisfaction. This descriptive research, designed according to the relational survey model, was conducted with the participation of 356 school administrators. The study data were collected through online questionnaires, and then t-test, ANOVA, correlation analysis, and simple linear regression analysis were employed for the statistical analyses. The results revealed that female school administrators experienced greater levels of COVID-19 phobia than their male peers and that COVID-19 phobia is felt more intensely in the psychological and social sub-dimensions. However, female school administrators’ life satisfaction levels were significantly higher than those of male school administrators. In the current study, it was determined that school administrators in the younger age group experienced greater levels of COVID-19 phobia and family–work/work–family conflict than their peers from other age groups. The results of this study revealed a positive and moderate relationship between school administrators’ COVID-19 phobia and their levels of both work–family and family–work conflict. The findings of the study offer significant implications for policy makers in education, showing the importance of developing strategies that will reduce the effects of the pandemic for a more sustainable and efficient employee performance.

Aspectos biofísicos de la transmisión del SARS-CoV-2 y medidas para contrarrestar la COVID-19: una revisión integral

La pandemia por COVID-19 ha tenido al mundo en vilo desde su inicio en diciembre de 2019 al sur de China. Su alcance global obedece a que el SARS-CoV-2, su agente etiológico, ha mostrado una alta facilidad para transmitirse entre humanos. Desde entonces, Gobiernos de todas las naciones han desplegado una batería de medidas para disminuir sus consecuencias. De acuerdo con el crecimiento del contagio, se emplean medidas de contención, mitigación o supresión. La base científica de las medidas se deriva del conocimiento de las características biológicas del virus y de sus vías de transmisión. Por tanto, en este trabajo se revisarán la biología del coronavirus, la física de su transmisión y el concepto de dosis de infección que permiten comprender las intervenciones sanitarias empleadas para disminuir los casos y fallecimientos por la enfermedad, especialmente en el contexto latinoamericano.

Excess of COVID-19 cases and deaths due to fine particulate matter exposure during the 2020 wildfires in the United States

The year 2020 brought unimaginable challenges in public health, with the confluence of the COVID-19 pandemic and wildfires across the western United States. Wildfires produce high levels of fine particulate matter (PM_2.5). Recent studies reported that short-term exposure to PM_2.5 is associated with increased risk of COVID-19 cases and deaths. We acquired and linked publicly available daily data on PM_2.5, the number of COVID-19 cases and deaths, and other confounders for 92 western U.S. counties that were affected by the 2020 wildfires. We estimated the association between short-term exposure to PM_2.5 during the wildfires and the epidemiological dynamics of COVID-19 cases and deaths. We adjusted for several time-varying confounding factors (e.g., weather, seasonality, long-term trends, mobility, and population size). We found strong evidence that wildfires amplified the effect of short-term exposure to PM_2.5 on COVID-19 cases and deaths, although with substantial heterogeneity across counties.

The effect of environmental diesel exhaust pollution on SARS-CoV-2 infection: The mechanism of pulmonary ground glass opacity

Diesel exhaust particles (DEP) are the major components of atmospheric particulate matter (PM) and chronic exposure is recognized to enhance respiratory system complications. Although the spread of SARS-CoV-2 was found to be associated with the PMs, the mechanism by which exposure to DEP increases the risk of SARS-CoV-2 infection is still under discussion. However, diesel fine PM (dPM) elevate the probability of SARS-CoV-2 infection, as it coincides with the increase in the number of ACE2 receptors. Expression of ACE2 and its colocalized activator, transmembrane protease serine 2 (TMPRSS2) facilitate the entry of SARS-CoV-2 into the alveolar epithelial cells exposed to dPM. Thus, the coexistence of PM and SARS-CoV-2 in the environment augments inflammation and exacerbates lung damage. Increased TGF-β1 expression due to DEP accompanies the proliferation of the extracellular matrix. In this case, "multifocal ground-glass opacity" (GGO) in a CT scan is an indication of a cytokine storm and severe pneumonia in COVID-19.

An IoT enabled system for enhanced air quality monitoring and prediction on the edge

Air pollution is a major issue resulting from the excessive use of conventional energy sources in developing countries and worldwide. Particulate Matter less than 2.5 µm in diameter (PM2.5) is the most dangerous air pollutant invading the human respiratory system and causing lung and heart diseases. Therefore, innovative air pollution forecasting methods and systems are required to reduce such risk. To that end, this paper proposes an Internet of Things (IoT) enabled system for monitoring and predicting PM2.5 concentration on both edge devices and the cloud. This system employs a hybrid prediction architecture using several Machine Learning (ML) algorithms hosted by Nonlinear AutoRegression with eXogenous input (NARX). It uses the past 24 h of PM2.5, cumulated wind speed and cumulated rain hours to predict the next hour of PM2.5. This system was tested on a PC to evaluate cloud prediction and a Raspberry P i to evaluate edge devices' prediction. Such a system is essential, responding quickly to air pollution in remote areas with low bandwidth or no internet connection. The performance of our system was assessed using Root Mean Square Error (RMSE), Normalized Root Mean Square Error (NRMSE), coefficient of determination (R 2), Index of Agreement (IA), and duration in seconds. The obtained results highlighted that NARX/LSTM achieved the highest R 2 and IA and the least RMSE and NRMSE, outperforming other previously proposed deep learning hybrid algorithms. In contrast, NARX/XGBRF achieved the best balance between accuracy and speed on the Raspberry P i .

COVID-19 false dichotomies and a comprehensive review of the evidence regarding public health, COVID-19 symptomatology, SARS-CoV-2 transmission, mask wearing, and reinfection

Scientists across disciplines, policymakers, and journalists have voiced frustration at the unprecedented polarization and misinformation around coronavirus disease 2019 (COVID-19) pandemic. Several false dichotomies have been used to polarize debates while oversimplifying complex issues. In this comprehensive narrative review, we deconstruct six common COVID-19 false dichotomies, address the evidence on these topics, identify insights relevant to effective pandemic responses, and highlight knowledge gaps and uncertainties. The topics of this review are: 1) Health and lives vs. economy and livelihoods, 2) Indefinite lockdown vs. unlimited reopening, 3) Symptomatic vs. asymptomatic severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, 4) Droplet vs. aerosol transmission of SARS-CoV-2, 5) Masks for all vs. no masking, and 6) SARS-CoV-2 reinfection vs. no reinfection. We discuss the importance of multidisciplinary integration (health, social, and physical sciences), multilayered approaches to reducing risk ("Emmentaler cheese model"), harm reduction, smart masking, relaxation of interventions, and context-sensitive policymaking for COVID-19 response plans. We also address the challenges in understanding the broad clinical presentation of COVID-19, SARS-CoV-2 transmission, and SARS-CoV-2 reinfection. These key issues of science and public health policy have been presented as false dichotomies during the pandemic. However, they are hardly binary, simple, or uniform, and therefore should not be framed as polar extremes. We urge a nuanced understanding of the science and caution against black-or-white messaging, all-or-nothing guidance, and one-size-fits-all approaches. There is a need for meaningful public health communication and science-informed policies that recognize shades of gray, uncertainties, local context, and social determinants of health.

Role of atmospheric particulate matter exposure in COVID-19 and other health risks in human: A review

Due to intense industrialization and urbanization, air pollution has become a serious global concern as a hazard to human health. Epidemiological studies found that exposure to atmospheric particulate matter (PM) causes severe health problems in human and significant damage to the physiological systems. In recent days, PM exposure could be related as a carrier for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus transmission and Coronavirus disease 2019 (COVID-19) infection. Hence, it is important to understand the adverse effects of PM in human health. This review aims to provide insights on the detrimental effects of PM in various human health problems including respiratory, circulatory, nervous, and immune system along with their possible toxicity mechanisms. Overall, this review highlights the potential relationship of PM with several life-limiting human diseases and their significance for better management strategies.

Air Pollution and COVID-19: A Possible Dangerous Synergy for Male Fertility

Several studies indicate that semen quality has strongly declined in the last decades worldwide. Air pollution represents a significant co-factor with the COVID-19 impact and has negative effects on the male reproductive system, through pro-oxidant, inflammatory and immune-dysregulating mechanisms. It has recently been reported that chronic exposure to PM2.5 causes overexpression of the alveolar ACE2 receptor, the entry route of SARS-CoV-2 into the organism shared by the lungs and testis where expression is highest in the body. In the testis, the ACE2/Ang-(1-7)/MasR pathway plays an important role in the regulation of spermatogenesis and an indirect mechanism of testicular damage could be due to the blockade of the ACE2 receptor by SARS-CoV-2. This prevents the conversion of specific angiotensins, and their excess causes inflammation with the overproduction of cytokines. PM2.5-induced overexpression of the alveolar ACE2 receptor, in turn, could increase local viral load in patients exposed to pollutants, producing ACE2 receptor depletion and compromising host defenses. By presenting an overall view of epidemiological data and molecular mechanisms, this manuscript aims to interpret the possible synergistic effects of both air pollution and COVID-19 on male reproductive function, warning that the spread of SARS-CoV-2 in the fertile years may represent a significant threat to global reproductive health. All of this should be of great concern, especially for men of the age of maximum reproductive capacity, and an important topic of debate for policy makers. Altered environmental conditions, together with the direct and indirect short- and long-term effects of viral infection could cause a worsening of semen quality with important consequences for male fertility, especially in those areas with higher environmental impact.

Airborne transmission of pathogen-laden expiratory droplets in open outdoor space

Virus-laden droplets dispersion may induce transmissions of respiratory infectious diseases. Existing research mainly focuses on indoor droplet dispersion, but the mechanism of its dispersion and exposure in outdoor environment is unclear. By conducting CFD simulations, this paper investigates the evaporation and transport of solid-liquid droplets in an open outdoor environment. Droplet initial sizes (d_p = 10 μm, 50 μm, 100 μm), background relative humidity (RH = 35%, 95%), background wind speed (U_ref = 3 m/s, 0.2 m/s) and social distances between two people (D = 0.5 m, 1 m, 1.5 m, 3 m, 5 m) are investigated. Results show that thermal body plume is destroyed when the background wind speed is 3 m/s (Froude number F_r ~ 10). The inhalation fraction (IF) of susceptible person decreases exponentially when the social distance (D) increases from 0.5 m to 5 m. The exponential decay rate of inhalation fraction (b) ranges between 0.93 and 1.06 (IF=IF₀e^-b(D-0.5)) determined by the droplet initial diameter and relative humidity. Under weak background wind (U_ref = 0.2 m/s, F_r ~ 0.01), the upward thermal body plume significantly influences droplet dispersion, which is similar with that in indoor space. Droplets in the initial sizes of 10 μm and 50 μm disperse upwards while most of 100 μm droplets fall down to the ground due to larger gravity force. Interestingly, the deposition fraction on susceptible person is ten times higher at U_ref = 3 m/s than that at U_ref = 0.2 m/s. Thus, a high outdoor wind speed does not necessarily lead to a smaller exposure risk if the susceptible person locating at the downwind region of the infected person, and people in outdoors are suggested to not only keep distance of greater than 1.5 m from each other but also stand with considerable angles from the prevailing wind direction.