Biophysical and biochemical characteristics of cutin, a plant barrier biopolymer

Cutinsomes of Malus Mill. (Rosaceae) leaf and pericarp: genesis, localization, and transport

New data were obtained on specific bionanostructures, cutinsomes, which are involved in the formation of cuticles on the surface of leaf blades and pericarp of Malus domestica Borkh (Malus Mill., Rosaceae)introduced to the mountains at the altitudes of 1200 and 1700 m above sea level. Cutinsomes, which are electron-dense structures of spherical shape, have been identified by transmission electron microscopy. It was demonstrated that plastids can be involved in the synthesis of their constituent nanocomponents. The greatest number of nanoparticles was observed in the granal thylakoid lumen of the chloroplasts in palisade mesophyll cells and pericarp hypodermal cells. The transmembrane transport of cutinsomes into the cell wall cuticle proper by exocytosis has been visualized for the first time. The plasma membrane is directly involved in the excretion of nanostructures from the cell. Nanoparticles of cutinsomes in the form of necklace-like formations line up in a chain near cell walls, merge into larger conglomerates and are loaded into plasmalemma invaginations, and then, in membrane packing, they move into the cuticle, which covers both outer and inner cell walls of external tissues. The original materials obtained by us supplement the ideas about the non-enzymatic synthesis of cuticle components available in the literature and expand the cell compartment geography involved in this process.

Betulin Enables Multifunctional Cellulose-Based Insulative Foams with Low Environmental Impacts

The significance of synthetic foams as insulative materials stems from their mechanical and water resistance as well as their cost-effectiveness. Broadly, the design of building envelopes should also consider fire and mold resistance and the impacts on the environment (end of life and compostability). This study addresses these issues considering the ever-increasing demand for sustainable sources to develop highly porous insulative materials. We introduce a versatile strategy based on wet-foam laying of cellulosic fibers that leads to hierarchical structures whose performance is tailored by the surface incorporation of betulin (BT), a bioactive molecule extracted from tree bark, combined with poly(dimethylsiloxane) (PDMS) after installation of urethane linkages. As such, we introduce an eco-friendly alternative to traditional polyurethane foams with competitive mechanical and thermal insulation performance. The modification of the fiber foams at low BT loading simultaneously endows superhydrophobicity (water contact angle >150°), fire retardancy (self-extinguish within 10 s), microbial resistance, and durability (no degradation in soil conditions after 3 months). BT plays a critical role as an antimicrobial and hydrophobic agent that synergizes with PDMS to achieve fire resistance. The life cycle assessment of the BT-modified foams reveals a significant reduction in greenhouse gas emission and human toxicity compared with rigid polyurethane foams by 96 and 92%, respectively. Overall, the valorization of the bark-derived BT is demonstrated by considering the scalability and cost-effectiveness of solid foams designed to substitute petroleum-derived counterparts.

Research advances on the hard seededness trait of soybean and the underlying regulatory mechanisms

Soybean is one of the world's most economically significant crops and is widely utilized as an essential source of vegetable protein and edible oil. Cultivated soybean is domesticated from its annual counterpart, wild soybean, which is considered valuable germplasm for soybean breeding. However, wild soybean accessions generally produce seeds with impermeable coats, a trait known as hard seededness (HS), which is beneficial for long-term seed survival but is undesirable for the uniform water absorption and germination of seeds, thus limiting the utilization of wild soybeans in breeding. In addition, moderate HS can isolate the embryo from the surrounding environment and is thus beneficial for long-term seed storage and germplasm preservation. The HS trait is primarily associated with the structure and chemical composition of the seed coat. Moreover, its development is also influenced by various environmental conditions, such as water and temperature. Genetic analysis has revealed that HS of soybean is a complex quantitative trait controlled by multiple genes or minor quantitative trait loci (QTL), with many QTLs and several causal genes currently identified. Investigating the physiological and molecular mechanisms underlying this trait is crucial for soybean breeding, production, and food processing. For this article, the literature was reviewed and condensed to create a well-rounded picture of the current understanding of internal and external factors, QTLs, causal genes, and the regulatory mechanisms related to the HS of soybean, with the aim of providing reference for future research and utilization of this trait.

Enhancing Cutin Extraction Efficiency from Industrially Derived Tomato Processing Residues by High-Pressure Homogenization

This study primarily aimed to enhance the extraction of cutin from industrial tomato peel residues. Initially, the conventional extraction process was optimized using response surface methodology (RSM). Subsequently, high-pressure homogenization (HPH) was introduced to improve extraction efficiency and sustainability. The optimization process focused on determining the optimal conditions for conventional extraction via chemical hydrolysis, including temperature (100-130 °C), time (15-120 min), and NaOH concentration (1-3%). The optimized conditions, determined as 130 °C, 120 min, and 3% NaOH solution, yielded a maximum cutin extraction of 32.5%. Furthermore, the results indicated that applying HPH pre-treatment to tomato peels before alkaline hydrolysis significantly increased the cutin extraction yield, reaching 46.1%. This represents an approximately 42% increase compared to the conventional process. Importantly, HPH pre-treatment enabled cutin extraction under milder conditions using a 2% NaOH solution, reducing NaOH usage by 33%, while still achieving a substantial cutin yield of 45.6%. FT-IR analysis confirmed that cutin obtained via both conventional and HPH-assisted extraction exhibited similar chemical structures, indicating that the main chemical groups and structure of cutin remained unaltered by HPH treatment. Furthermore, cutin extracts from both conventional and HPH-assisted extraction demonstrated thermal stability up to approximately 200 °C, with less than 5% weight loss according to TGA analysis. These findings underscore the potential of HPH technology to significantly enhance cutin extraction yield from tomato peel residues while utilizing milder chemical hydrolysis conditions, thereby promoting a more sustainable and efficient cutin extraction process.

Transcriptional and structural analysis of non-specific lipid transfer proteins modulated by fungal endophytes in Antarctic plants under drought

Lipid transfer proteins (LTPs) play crucial roles in various biological processes in plants, such as pollen tube adhesion, phospholipid transfer, cuticle synthesis, and response to abiotic stress. While a few members of the non-specific LTPs (nsLTPs) have been identified, their structural characteristics remain largely unexplored. Given the observed improvement in the performance of Antarctic plants facing water deficit when associated with fungal endophytes, this study aimed to assess the role of these symbiotic organisms in the transcriptional modulation of putative nsLTPs. The study focused on identifying and characterizing two nsLTP in the Antarctic plant Colobanthus quitensis that exhibit responsiveness to drought stress. Furthermore, we investigated the influence of Antarctic endophytic fungi on the expression profiles of these nsLTPs, as these fungi have been known to enhance plant physiological and biochemical performance under water deficit conditions. Through 3D modeling, docking, and molecular dynamics simulations with different substrates, the conducted structural and ligand-protein interaction analyses showed that differentially expressed nsLTPs displayed the ability to interact with various ligands, with a higher affinity towards palmitoyl-CoA. Overall, our findings suggest a regulatory mechanism for the expression of these two nsLTPs in Colobanthus quitensis under drought stress, further modulated by the presence of endophytic fungi.

Crosslinked Polyesters as Fully Biobased Coatings with Cutin Monomer from Tomato Peel Wastes

Cutin, one of the main structural components of tomato peels, is a waxy biopolymer rich in hydroxylated fatty acids. In this study, 10,16-dihydroxyhexadecanoic acid (10,16-diHHDA) was extracted and isolated from tomato peels and exploited to develop fully crosslinked polyesters as potential candidates for replacing fossil-based metal protective coatings. A preliminary screening was conducted to select the base formulation, and then a design of experiments (DoE) was used as a methodology to identify the optimal composition to develop a suitable coating material. Different formulations containing 10,16-diHHDA and other biorefinery monomers, including 2,5-furandicarboxylic acid, were considered. To this end, all polyesters were characterized through differential scanning calorimetry (DSC) and gel content measurements to determine their Tg value and crosslinking efficiency. Compositions exhibiting the best trade-off between Tg value, chemical resistance, and sufficiently high 10,16-diHHDA content between 39 and 48 wt.% were used to prepare model coatings that were characterized for assessing their wettability, scratch hardness, chemical resistance, and adhesion to metal substrates. These polyester coatings showed a Tg in the range of 45-55 °C, a hydrophobic behavior with a water contact angle of around 100°, a good solvent resistance (>100 MEK double rubs), and an adhesion strength to steel higher than 2 MPa. The results obtained confirmed the potential of cutin-based resins as coatings for metal protection, meeting the requirements for ensuring physicochemical properties of the final product, as well as for optimizing the valorization of such an abundant agri-food waste as tomato peels.

Structural Studies of Mexican Husk Tomato (Physalis ixocarpa) Fruit Cutin

Green tomato (Physalis ixocarpa) is a specie native to Mexico, and it is known as "tomatillo" or "husk tomato". The fruit contains vitamins, minerals, phenolic compounds, and steroidal lactones, presenting antimicrobial activity and antinarcotic effects. Therefore, it is not only used in traditional Mexican cuisine, but also in traditional medicine to relieve some discomforts such as fever, cough, and amygdalitis. However, it is a perishable fruit whose shelf life is very short. As a part of the peel, cuticle, and epicuticular waxes represent the most important part in plant protection, and the specific composition and structural characterization are significant to know how this protective biopolymer keeps quality characteristics in fresh fruits. P. ixocarpa cutin was obtained by enzymatic treatments (cellulase, hemicellulose, and pectinase) and different concentrations of TFA, and studied through Cross Polarization Magic Angle Spinning Nuclear Magnetic Resonance (CPMAS 13C NMR), Ultra-High Performance Liquid Chromatography coupled to Mass Spectrometry (UHPLC-MS), and was morphologically characterized by Confocal Laser Scanning Microscopy (CLSM) and Scanning Electron Microscopy (SEM). The main constituents identified under the basis of UHPLC-MS analysis were 9,10,18-trihydroxy-octadecanoic acid and 9,10-epoxy-18-hydroxy-octadecanoic acid with 44.7 and 37.5%, respectively. The C16 absence and low occurrence of phenolic compounds, besides the presence of glandular trichomes, which do not allow a continuous layer on the surface of the fruit, could be related to a lower shelf life compared with other common fruits such as tomato (Solanum lycopersicum).

Comparative genome analysis of the freshwater fungus Filosporella fistucella indicates potential for plant-litter degradation at cold temperatures

Freshwater fungi play an important role in the decomposition of organic matter of leaf litter in rivers and streams. They also possess the necessary mechanisms to endure lower temperatures caused by habitat and weather variations. This includes the production of cold-active enzymes and antifreeze proteins. To better understand the physiological activities of freshwater fungi in their natural environment, different methods are being applied, and genome sequencing is one in the spotlight. In our study, we sequenced the first genome of the freshwater fungus Filosporella fistucella (45.7 Mb) and compared the genome with the evolutionary close-related species Tricladium varicosporioides (48.2 Mb). The genomes were annotated using the carbohydrate-active enzyme database where we then filtered for leaf-litter degradation-related enzymes (cellulase, hemicellulase, laccase, pectinase, cutinase, amylase, xylanase, and xyloglucanase). Those enzymes were analyzed for antifreeze properties using a machine-learning approach. We discovered that F. fistucella has more enzymes to participate in the breakdown of sugar, leaf, and wood than T. varicosporioides (855 and 719, respectively). Filosporella fistucella shows a larger set of enzymes capable of resisting cold temperatures than T. varicosporioides (75 and 66, respectively). Our findings indicate that in comparison with T. varicosporioides, F. fistucella has a greater capacity for aquatic growth, adaptability to freshwater environments, and resistance to low temperatures.

The COPII subunit CsSEC23 mediates fruit glossiness in cucumber

To improve our understanding of the mechanism underlying cucumber glossiness regulation, a novel cucumber mutant with a glossy peel (Csgp) was identified. MutMap, genotyping, and gene editing results demonstrated that CsSEC23, which is the core component of COPII vesicles, mediates the glossiness of cucumber fruit peel. CsSEC23 is functionally conserved and located in the Golgi and endoplasmic reticulum. CsSEC23 could interact with CsSEC31, but this interaction was absent in the Csgp mutant, which decreased the efficiency of COPII vesicle transportation. Genes related to wax and cutin transport were upregulated in the Csgp mutant, and the cuticle structure of the Csgp-mutant peel became thinner. Moreover, the wax and cutin contents were also changed due to CsSEC23 mutation. Taken together, the results obtained from this study revealed that CsSEC23 mediates cucumber glossiness, and this mediating might be affected by COPII vesicle transportation.

Optimization of the conditions of alkaline extraction of tomato peels and characterization of tomato peel extracts obtained under atmospheric and oxygen free conditions

This study aims to optimize the extraction conditions to obtain the highest yield, to characterize tomato peel extract (TPE) under optimized conditions, and also to determine the effect of ambient oxygen on the properties of TPE. Optimisation were performed at three temperatures (60 °C, 80 °C, 100 °C) and three periods (2, 4, 6 h) by the response surface methodology. The properties of the extract under atmospheric and oxygen-free conditions (AC, OFC) were analysed to determine whether the characteristics of both extracts changed depending on the presence of oxygen; moreover, the morphological, chemical, thermal, biochemical, and antimicrobial properties were analysed. The maximum yield was 31.3% at 100 °C/6 h. A quadratic model was used to create the best fit. Both TPE samples exhibited similar morphological structure, similar weight losses at three stages of TGA curve, similar band assignments in FTIR spectra. GC-MS analysis showed that both samples mainly consisted of cutin in abundance of 70.45% and 68.14% for AC and OFC, respectively. OFC had higher total phenolic content possibly depending on the absence of oxygen. AC and OFC extracts exhibited substantial antimicrobial activity against S. aureus, E. coli, C. albicans, and A. brasiliensis with a MIC value of 100 μg TPE/ mL.

Effects of Foliar-Applied Mixed Mineral Fertilizers and Organic Biostimulants on the Growth and Hybrid Seed Production of a Male-Sterile Inbred Maize Line

Plants of inbred maize lines are characterized by low vigor due to their high rates of homozygosity and may, therefore, benefit from additional nutrients and biostimulants supplied via foliar spraying. The present study innovatively investigated the effects of foliar treatment with three commercial organic-mineral fertilizers/biostimulants on a male-sterile inbred line of maize at the five-leaf stage. The three fertilizers were characterized by their following content: (i) NPK + hydrolyzed animal epithelium + micronutrients (named 'NPK + Hae + micro'), (ii) NK + humified peat (named 'NK + Hp'), and (iii) PK + Ascophyllum nodosum extracts (named 'PK + An'). The resulting shoot and root growth and seed yield and quality were compared to a control (C). Both NPK + Hae + micro and PK + An treatments enhanced root growth in the top 20 cm soil layer at the ten-leaf stage: root dry biomass increased by 80 and 24%, respectively, and the volumetric root length density by 61 and 17%. The two treatments also allowed for a larger number of commercial seeds to be produced (on average +16 bags per gross hectare vs. C) owing to a better seed caliber, which consequently reduced rates of seed disposal (-11 and -20% for PK + An and NPK + Hae + micro, respectively) and, in the case of NPK + Hae + micro, due to an increment in the number of kernels per ear (+5% vs. C). These effects were not associated with any significant changes in shoot growth, height, or leaf net CO2 assimilation. In this preliminary trial, peak commercial benefit was obtained with the use of hydrolyzed epithelium together with macro- and micronutrients. Further investigation into application timing and dose, and the means by which these products alleviate the effects of low vigor and stress conditions observed particularly under mechanical emasculation is, however, necessary for their full exploitation in the production of hybrid maize seeds.

Discovery and rational engineering of PET hydrolase with both mesophilic and thermophilic PET hydrolase properties

Excessive polyethylene terephthalate (PET) waste causes a variety of problems. Extensive research focused on the development of superior PET hydrolases for PET biorecycling has been conducted. However, template enzymes employed in enzyme engineering mainly focused on IsPETase and leaf-branch compost cutinase, which exhibit mesophilic and thermophilic hydrolytic properties, respectively. Herein, we report a PET hydrolase from Cryptosporangium aurantiacum (CaPETase) that exhibits high thermostability and remarkable PET degradation activity at ambient temperatures. We uncover the crystal structure of CaPETase, which displays a distinct backbone conformation at the active site and residues forming the substrate binding cleft, compared with other PET hydrolases. We further develop a CaPETase^M9 variant that exhibits robust thermostability with a T_m of 83.2 °C and 41.7-fold enhanced PET hydrolytic activity at 60 °C compared with CaPETase^WT. CaPETase^M9 almost completely decompose both transparent and colored post-consumer PET powder at 55 °C within half a day in a pH-stat bioreactor.

Recovery and Purification of Cutin from Tomato By-Products for Application in Hydrophobic Films

Tomato pomace is a low-cost, renewable resource that has been studied for the extraction of the biopolyester cutin, which is mainly composed of long-chain hydroxy fatty acids. These are excellent building blocks to produce new hydrophobic biopolymers. In this work, the monomers of cutin were extracted and isolated from tomato pomace and utilized to produce cutin-based films. Several strategies for the depolymerization and isolation of monomeric cutin were explored. Strategies differed in the state of the raw material at the beginning of the extraction process, the existence of a tomato peel dewaxing step, the type of solvent used, the type of alkaline hydrolysis, and the isolation method of cutin monomers. These strategies enabled the production of extracts enriched in fatty acids (16-hydroxyhexadecanoic, hexadecanedioic, stearic, and linoleic, among others). Cutin and chitosan-based films were successfully cast from cutin extracts and commercial chitosan. Films were characterized regarding their thickness (0.103 ± 0.004 mm and 0.106 ± 0.005 mm), color, surface morphology, water contact angle (93.37 ± 0.31° and 95.15 ± 0.53°), and water vapor permeability ((3.84 ± 0.39) × 10^-11 mol·m/m²·s·Pa and (4.91 ± 1.33) × 10^-11 mol·m/m²·s·Pa). Cutin and chitosan-based films showed great potential to be used in food packaging and provide an application for tomato processing waste.

3D (x-y-t) Raman imaging of tomato fruit cuticle: Microchemistry during development

The cuticle is a protective extracellular matrix that covers the above-ground epidermis of land plants. Here, we studied the cuticle of tomato (Solanum lycopersicum L.) fruits in situ using confocal Raman microscopy. Microsections from cuticles isolated at different developmental stages were scanned to visualize cuticle components with a spatial resolution of 342 nm by univariate and multivariate data analysis. Three main components, cutin, polysaccharides, and aromatics, were identified, with the latter exhibiting the strongest Raman scattering intensity. Phenolic acids and flavonoids were differentiated within the cuticle, and three schematic cuticle models were identified during development. Phenolic acids were found across the entire cuticle at the earliest stage of development, i.e. during the formation of the procuticle layer. Based on a mixture analysis with reference component spectra, the phenolic acids were identified as mainly esterified p-coumaric acid together with free p-hydroxybenzoic acid. During the cell expansion period of growth, phenolic acids accumulated in an outermost layer of the cuticle and in the middle region of the pegs. In these stages of development, cellulose and pectin were detected next to the inner cuticle region, close to the epidermal cell where flavonoid impregnation started during ripening. In the first ripening stage, chalconaringenin was observed, while methoxylated chalcones were chosen by the algorithm to fit the mature cuticle spectra. The colocation of carbohydrates, esterified p-coumaric acid, and methoxylated chalconaringenin suggests that the latter two link polysaccharide and cutin domains. Elucidating the different distribution of aromatics within the cuticle, suggests important functions: (1) overall impregnation conferring mechanical and thermal functions (2) the outermost phenolic acid layer displaying UV-B protection of the plant tissue.

The Molecular, Morphological and Genetic Characterization of Glyphosate Resistance in Conyza bonariensis from South Africa

Six Conyza bonariensis (L.) Cronquist populations were screened in a pot experiment at the University of Pretoria's Hatfield experimental farm to evaluate and confirm the degree of glyphosate response. Resistance factors ranged from 2.7- to 24.8-fold compared to the most susceptible biotype. Partial sequencing of the 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) gene found no mutation at the Thr102, Ala103 or Pro106 positions. EPSPS mRNA expression levels in glyphosate-resistant biotypes (Swellendam and Piketberg seed sampling sites) were comparable or lower than those in susceptible biotypes (George and Fauresmith sites). Additionally, the highest expression level was reported in the susceptible Fauresmith biotype. These results indicate that glyphosate resistance in the tested resistant biotypes is not caused by target-site mutations and EPSPS gene amplification. Leaf surface characteristics can influence the spread and subsequent absorption of glyphosate. The study established non-significant results in the amount of leaf wax and insufficient mean separations in cuticle thickness and trichome density data. Therefore, the observed differences in response of biotypes to glyphosate treatment could not be attributed conclusively to differences in the leaf morphological characteristics investigated. Results from the inheritance study were consistent with glyphosate resistance being inherited in an incompletely dominant manner when plants were treated with glyphosate herbicide at 900 g ae ha^-1.

Cuticle structure and chemical composition of waxes in Phaeoceros laevis (L.) Prosk (Notothyladaceae, Anthocerotophyta)

The development of a hydrophobic cuticle covering the epidermis was a crucial evolutionary novelty ensuring the establishment of land plants. However, there is little information about its structure and chemical composition, as well as its functional implications in avascular lineages such as Anthocerotophyta. The main goal of the present study was to compare the gametophyte and sporophyte cuticles of Phaeoceros laevis. Semithin sections were analyzed through light microscopy (LM), cuticle structure was evaluated by transmission electron microscopy (TEM) and epicuticular wax morphology was analyzed by scanning electron microscopy (SEM). Total waxes were analyzed by CG/MS, and the components were identified based on the mass spectra. A thin lipophilic layer was detected on the sporophyte surface, structured as a stratified cuticular layer, similar to the well-known structure described for vascular plants. On the other hand, the gametophyte cuticle was observed only with TEM as a thin osmiophilic layer. SEM analyses showed a film-type wax on the surface of both life phases. The wax layer was eight-fold thicker on the sporophyte (0.8 µg cm^-2) than on gametophyte (0.1 µg cm^-2). Possible mechanical and/or drought protection are discussed. Fatty acids, primary alcohols, and steroids were identified in both life phases, while the kauren-16-ene diterpene (3%) was detected only on the sporophyte. Although no alkanes were detected in P. laevis, our findings unveil great similarity of the sporophyte cuticle of this hornwort species with the general data described for vascular plants, reinforcing the conservative condition of this character and supporting the previous idea that the biosynthetic machinery involved in the synthesis of wax compounds is conserved since the ancestor of land plants.

Ancestral sequence reconstruction as a tool to study the evolution of wood decaying fungi

The study of evolution is limited by the techniques available to do so. Aside from the use of the fossil record, molecular phylogenetics can provide a detailed characterization of evolutionary histories using genes, genomes and proteins. However, these tools provide scarce biochemical information of the organisms and systems of interest and are therefore very limited when they come to explain protein evolution. In the past decade, this limitation has been overcome by the development of ancestral sequence reconstruction (ASR) methods. ASR allows the subsequent resurrection in the laboratory of inferred proteins from now extinct organisms, becoming an outstanding tool to study enzyme evolution. Here we review the recent advances in ASR methods and their application to study fungal evolution, with special focus on wood-decay fungi as essential organisms in the global carbon cycling.

The methyl-CpG-binding domain family member PEM1 is essential for Ubisch body formation and pollen exine development in rice

Pollen exine is composed of finely-organized nexine, bacula and tectum, and is crucial for pollen viability and function. Pollen exine development involves a complicated molecular network that coordinates the interaction between pollen and tapetal cells, as well as the biosynthesis, transport and assembly of sporopollenin precursors; however, our understanding of this network is very limited. Here, we report the roles of PEM1, a member of methyl-CpG-binding domain family, in rice pollen development. PEM1 expressed constitutively and, in anthers, its expression was detectable in tapetal cells and pollen. This predicted PEM1 protein of 240 kDa had multiple epigenetic-related domains. pem1 mutants exhibited abnormal Ubisch bodies, delayed exine occurrence and, finally, defective exine, including invisible bacula, amorphous and thickened nexine and tectum layer structures, and also had the phenotype of increased anther cuticle. The mutation in PEM1 did not affect the timely degradation of tapetum. Lipidomics revealed much higher wax and cutin contents in mutant anthers than in wild-type. Accordingly, this mutation up-regulated the expression of a set of genes implicated in transcriptional repression, signaling and diverse metabolic pathways. These results indicate that PEM1 mediates Ubisch body formation and pollen exine development mainly by negatively modulating the expression of genes. Thus, the PEM1-mediated molecular network represents a route for insights into mechanisms underlying pollen development. PEM1 may be a master regulator of pollen exine development.

Particulate matter and polycyclic aromatic hydrocarbon uptake in relation to leaf surface functional traits in Mediterranean evergreens: Potentials for air phytoremediation

We explored relationships between particulate matter (PM) and polycyclic aromatic hydrocarbon (PAHs) leaf concentrations, uptake rates and leaf surface functional traits in four Mediterranean evergreen trees (Chamaerops humilis, Citrus × aurantium, Magnolia grandiflora, and Quercus ilex) during a dry month. Pollutant leaf concentration at different dates and uptake rate were correlated. We quantified PM by gravimetric analysis, PAHs were extracted from intact and dewaxed leaves and analyzed by GC-MS, and cuticle thickness, number and surface of stomata (N_s and S_S) and trichomes (N_t and S_t) were determined by optical microscopy. Infrared spectroscopy was used to investigate the leaves surfaces composition and assess esterification index (E). Studied species were characterized by unique combinations of functional traits and pollutant uptake capacities. PM₁₀ uptake scaled positively with S_S, S_t and upper cuticle thickness (T_c,u) across species. PM_2.5 uptake scaled positively with T_c,u, and thicker cuticles were also associated with greater shares of uptake of hydrophobic PM fractions. Uptakes of different fractions of PAH were generally weakly related to different leaf functional traits, except for some correlations with E and S_S. We conclude that both plant surface morphological and chemical leaf traits influence PM and PAH retention, unveiling their potential role in air phytoremediation.

Physio-biochemical and molecular characterization of a rice drought-insensitive TILLING line 1 (ditl1) mutant

Drought stress is a major abiotic stress that limits rice yield. Therefore, the development of new varieties tolerant to drought stress is a high priority in breeding programs. In this study, 150 rice M₁₀ mutant lines, previously developed using gamma-ray irradiation, were used, and a drought-insensitive rice mutant (ditl1) was selected by drought stress screening. The ditl1 mutant exhibited significantly decreased water loss, leaf curling, and H₂ O₂ accumulation under drought stress. Chlorophyll leaching assay and toluidine blue staining suggested lower cuticle permeability in ditl1 mutants than in wild-type (WT) plants. In addition, transmission electron microscopy revealed that ditl1 plants accumulated more cuticular wax on the epidermal surface. Whole-genome resequencing analysis suggested that the deletion of a single nucleotide on the LOC_Os05g48260 gene, a putative ortholog of WSD1 (wax ester synthase/diacylglycerol O-acyltransferase in Arabidopsis), maybe be the gene responsible for the drought insensitive phenotype of ditl1. The ditl1 mutant will be a valuable breeding resource for developing drought stress tolerant rice cultivar.

Biodegradation of plastic polymers by fungi: a brief review

Plastic polymers are non-degradable solid wastes that have become a great threat to the whole world and degradation of these plastics would take a few decades. Compared with other degradation processes, the biodegradation process is the most effective and best way for plastic degradation due to its non-polluting mechanism, eco-friendly nature, and cost-effectiveness. Biodegradation of synthetic plastics is a very slow process that also involves environmental factors and the action of wild microbial species. In this plastic biodegradation, fungi play a pivotal role, it acts on plastics by secreting some degrading enzymes, i.e., cutinase`, lipase, and proteases, lignocellulolytic enzymes, and also the presence of some pro-oxidant ions can cause effective degradation. The oxidation or hydrolysis by the enzyme creates functional groups that improve the hydrophilicity of polymers, and consequently degrade the high molecular weight polymer into low molecular weight. This leads to the degradation of plastics within a few days. Some well-known species which show effective degradation on plastics are Aspergillus nidulans, Aspergillus flavus, Aspergillus glaucus, Aspergillus oryzae, Aspergillus nomius, Penicillium griseofulvum, Bjerkandera adusta, Phanerochaete chrysosporium, Cladosporium cladosporioides, etc., and some other saprotrophic fungi, such as Pleurotus abalones, Pleurotus ostreatus, Agaricus bisporus and Pleurotus eryngii which also helps in degradation of plastics by growing on them. Some studies say that the degradation of plastics was more effective when photodegradation and thermo-oxidative mechanisms involved with the biodegradation simultaneously can make the degradation faster and easier. This present review gives current knowledge regarding different species of fungi that are involved in the degradation of plastics by their different enzymatic mechanisms to degrade different forms of plastic polymers.

Lessons from Biomass Valorization for Improving Plastic-Recycling Enzymes

Synthetic polymers such as plastics exhibit numerous advantageous properties that have made them essential components of our daily lives, with plastic production doubling every 15 years. The relatively low cost of petroleum-based polymers encourages their single use and overconsumption. Synthetic plastics are recalcitrant to biodegradation, and mismanagement of plastic waste leads to their accumulation in the ecosystem, resulting in a disastrous environmental footprint. Enzymes capable of depolymerizing plastics have been reported recently that may provide a starting point for eco-friendly plastic recycling routes. However, some questions remain about the mechanisms by which enzymes can digest insoluble solid substrates. We review the characterization and engineering of plastic-eating enzymes and provide some comparisons with the field of lignocellulosic biomass valorization. Expected final online publication date for the Annual Review of Chemical and Biomolecular Engineering, Volume 13 is October 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

BrWAX2 plays an essential role in cuticular wax biosynthesis in Chinese cabbage (Brassica rapa L. ssp. pekinensis)

Map-based cloning was used to identify the BrWAX2 gene, which was involved in the cuticular wax biosynthesis. The malfunction of BrWAX2 together with other reduced expression of genes in alkane-forming pathway caused the glossy phenotype. Cuticular wax covering the outer plant surface plays various roles in protecting against biotic and abiotic stresses. Wax-less mutant shows glossy in stem and leaf surface and plays important roles in enriching Chinese cabbage germplasm resources for breeding brilliant green varieties. However, genes responsible for the glossy trait in Chinese cabbage are rarely reported. In this study, we identified a glossy Chinese cabbage line Y1211-1. Genetic analysis indicated that the glossy trait in Y1211-1 was controlled by a single recessive locus, BrWAX2 (Brassica rapa WAX 2). Using bulked segregant sequencing (BSA-Seq) and kompetitive allele-specific PCR (KASP) assays, BrWAX2 was fine-mapped to an interval of 100.78 kb. Functional annotation analysis, expression analysis, and sequence variation analysis revealed that Bra032670, homologous to CER1 in Arabidopsis, was the most likely candidate gene for BrWAX2. The gene Bra032670 was absent in glossy mutant. Cuticular wax composition analysis and RNA-Seq analysis suggested that the absence of BrWAX2 together with the decreased expression of other genes in alkane-forming pathway reduced the wax amount and caused the glossy phenotype. Furthermore, we developed and validated the functional marker BrWAX2-sp for BrWAX2. Overall, these results provide insight into the molecular mechanism underlying cuticular wax biosynthesis and reveal valuable information for marker-assisted selection (MAS) breeding in Chinese cabbage.

Liquid and Solid Functional Bio-Based Coatings

The development of new bio-based coating materials to be applied on cellulosic and plastic based substrates, with improved performances compared to currently available products and at the same time with improved sustainable end of life options, is a challenge of our times. Enabling cellulose or bioplastics with proper functional coatings, based on biopolymer and functional materials deriving from agro-food waste streams, will improve their performance, allowing them to effectively replace fossil products in the personal care, tableware and food packaging sectors. To achieve these challenging objectives some molecules can be used in wet or solid coating formulations, e.g., cutin as a hydrophobic water- and grease-repellent coating, polysaccharides such as chitosan-chitin as an antimicrobial coating, and proteins as a gas barrier. This review collects the available knowledge on functional coatings with a focus on the raw materials used and methods of dispersion/application. It considers, in addition, the correlation with the desired final properties of the applied coatings, thus discussing their potential.

Direct Evidence for a Radial Gradient in Age of the Apple Fruit Cuticle

The pattern of cuticle deposition plays an important role in managing strain buildup in fruit cuticles. Cuticular strain is the primary trigger for numerous fruit-surface disorders in many fruit crop species. Recent evidence indicates a strain gradient may exist within the apple fruit cuticle. The outer layers of the cuticle are more strained and thus more susceptible to microcracking than the inner layers. A radial gradient in cuticle age is the most likely explanation. Our study aimed to establish whether (or not) deposition of new cutin in a developing apple fruit occurs on the inner surface of the cuticle, i.e., immediately abutting the outward-facing epidermal cell wall. Developing apples were fed with ¹³C oleic acid through the skin. Following a 14-d period for incorporation, the fruit was harvested and the cuticular membranes (CMs) isolated enzymatically. The CMs were then ablated to varying extents from the inner or the outer surfaces, using a cold atmospheric pressure plasma (CAPP). Afterwards, the ablated CMs were dewaxed and the ¹³C contents were determined by mass spectrometry. The incorporation of ¹³C in the cutin fraction was higher than in the wax fraction. The ¹³C content was highest in non-ablated, dewaxed CM (DCM) and decreased as ablation depth from the inner surface increased. There was no change in ¹³C content when ablation was carried out from the outer surface. As fruit development proceeded, more ¹³C label was found towards the middle of the DCM. These results offered direct evidence for deposition of cutin being on the inner surface of the cuticle, resulting in a radial gradient in cuticular age-the most recent deposition (youngest) being on the inner cuticle surface (abutting the epidermal cell wall) and the earliest deposition (oldest) being on the outer surface (abutting the atmosphere).

BnA1.CER4 and BnC1.CER4 are redundantly involved in branched primary alcohols in the cuticle wax of Brassica napus

The mutations BnA1.CER4 and BnC1.CER4 produce disordered wax crystals types and alter the composition of epidermal wax, causing increased cuticular permeability and sclerotium resistance. The aerial surfaces of land plants are coated with a cuticle, comprised of cutin and wax, which is a hydrophobic barrier for preventing uncontrolled water loss and environmental damage. However, the mechanisms by which cuticle components are formed are still unknown in Brassica napus L. and were therefore assessed here. BnA1.CER4 and BnC1.CER4, encoding fatty acyl-coenzyme A reductases localizing to the endoplasmic reticulum and highly expressed in leaves, were identified and functionally characterized. Expression of BnA1.CER4 and BnC1.CER4 cDNA in yeast (Saccharomyces cerevisiae) induced the accumulation of primary alcohols with chain lengths of 26 carbons. The mutant line Nilla glossy2 exhibited reduced wax crystal types, and wax composition analysis showed that the levels of branched primary alcohols were decreased, whereas those of the other branched components were increased. Further analysis showed that the mutant had reduced water retention but enhanced resistance to Sclerotinia sclerotiorum. Collectively, our study reports that BnA1.CER4 and BnC1.CER4 are fatty acyl-coenzyme A reductase genes in B. napus with a preference for branched substrates that participate in the biosynthesis of anteiso-primary alcohols.

Comparative analysis of alfalfa (Medicago sativa L.) seedling transcriptomes reveals genotype-specific drought tolerance mechanisms

Drought is one of the main abiotic factors that affect alfalfa yield. The identification of genes that control this complex trait can provide important insights for alfalfa breeding. However, little is known about how alfalfa responds and adapts to drought stress, particularly in cultivars of differing drought tolerance. In this study, the drought-tolerant cultivar Dryland 'DT' and the drought-sensitive cultivar WL343HQ 'DS' were used to characterize leaf and root physiological responses and transcriptional changes in response to water deficit. Under drought stress, Dryland roots (DTR) showed more differentially expressed genes than WL343HQ roots (DSR), whereas WL343HQ leaves (DSL) showed more differentially expressed genes than Dryland leaves (DTL). Many of these genes were involved in stress-related pathways, carbohydrate metabolism, and lignin and wax biosynthesis, which may have improved the drought tolerance of alfalfa. We also observed that several genes related to ABA metabolism, root elongation, peroxidase activity, cell membrane stability, ubiquitination, and genetic processing responded to drought stress in alfalfa. We highlighted several candidate genes, including sucrose synthase, xylan 1,4-beta-xylosidase, primary-amine oxidase, and alcohol-forming fatty acyl-CoA reductase, for future studies on drought stress resistance in alfalfa and other plant species. In summary, our results reveal the unique drought adaptation and resistance characteristics of two alfalfa genotypes. These findings, which may be valuable for drought resistance breeding, warrant further gene functional analysis to augment currently available information and to clarify the drought stress regulatory mechanisms of alfalfa and other plants.

The Optical Properties of Leaf Structural Elements and Their Contribution to Photosynthetic Performance and Photoprotection

Leaves have evolved to effectively harvest light, and, in parallel, to balance photosynthetic CO2 assimilation with water losses. At times, leaves must operate under light limiting conditions while at other instances (temporally distant or even within seconds), the same leaves must modulate light capture to avoid photoinhibition and achieve a uniform internal light gradient. The light-harvesting capacity and the photosynthetic performance of a given leaf are both determined by the organization and the properties of its structural elements, with some of these having evolved as adaptations to stressful environments. In this respect, the present review focuses on the optical roles of particular leaf structural elements (the light capture module) while integrating their involvement in other important functional modules. Superficial leaf tissues (epidermis including cuticle) and structures (epidermal appendages such as trichomes) play a crucial role against light interception. The epidermis, together with the cuticle, behaves as a reflector, as a selective UV filter and, in some cases, each epidermal cell acts as a lens focusing light to the interior. Non glandular trichomes reflect a considerable part of the solar radiation and absorb mainly in the UV spectral band. Mesophyll photosynthetic tissues and biominerals are involved in the efficient propagation of light within the mesophyll. Bundle sheath extensions and sclereids transfer light to internal layers of the mesophyll, particularly important in thick and compact leaves or in leaves with a flutter habit. All of the aforementioned structural elements have been typically optimized during evolution for multiple functions, thus offering adaptive advantages in challenging environments. Hence, each particular leaf design incorporates suitable optical traits advantageously and cost-effectively with the other fundamental functions of the leaf.

Study of UV-C treatments on postharvest life of blueberries 'O'Neal' and correlation between structure and quality parameters

The effect of different doses of UV-C light (5.3, 8.3 and 11.4 kJ/m²) on native mycobiota and Botrytis cinerea incidence, micro and ultrastructure, biomechanical properties and weight loss of blueberry fruit cv. O'Neal during 20 days of storage at 8 ± 1 °C was evaluated. Decay incidence was significantly reduced by all UV-C light doses for both, native mycobiota and inoculated B. cinerea. The highest UV-C dose studied (11.4 kJ/m²) was the most effective indelaying the onset of fungal and B. cinerea infection (6 and 4 days, respectively). UV-C irradiation caused some distinctive changes in fruit structure characterized by redistribution, alteration and partial removal of epicuticular waxes, reinforcement of epicarp cell walls, and modifications in the cuticle. Biomechanical parameters were not affected by UV-C treatments excepting at day 15 where irradiated samples showed higher values of rupture force (F_R) and deformation (D). Structure changes partially explained the significant increase in weight loss, F_R and D values in irradiated fruit after 15 days of storage. UV-C irradiation could be an alternative for delaying and reducing fungal infection. However, postharvest shelf-life of irradiated blueberries could be limited by the negative effect on weight loss.

Integrative analysis of the cuticular lipidome and transcriptome of Sorghum bicolor reveals cultivar differences in drought tolerance

Cuticular wax and cutin are directly involved in the mechanisms by which plants acclimate to water-limited environments. However, how the two lipid forms balance their contributions to plant drought-tolerance is still not clear. The present study examined the responses of cutin monomers and cuticular waxes to drought stress in two sorghum (Sorghum bicolor (L.) Moench) cultivars, drought-tolerant cv. Kangsi and drought-sensitive cv. Hongyingzi, by combining lipidomic and transcriptomic analysis. Drought increased total cutin contents by 41.3%, the contents of alkanoic acids by 72.6% and 2-hydroxyacids by 117.8% in Kangsi but unchanged those in Hongyingzi. The abundance of cutin monomers were relatively stable for cv Hongyingzi, excepting for a decrease of ω-hydroxyacids from 35.0% to 27.4% in drought-stressed plants. However, for cv Kangsi, the abundance of ω-hydroxyacids decreased from 36.8% to 21.0% and that of alkanoic acids increased from 30.5% to 37.1% in drought-stressed plants. Drought increased total wax coverage in Hongyingzi but reduced it in Kangsi. However, the abundance of aldehydes decreased from 51.2% to 39.3% in drought-stressed cv Kangsi, but increased from 25.2% to 36.1% in drought-stressed cv Hongyingzi. A decrease of sterols (by 76%) and an increase of primary alcohol (by 443%) was also observed in drought-stressed cv Hongyingzi. Transcriptome analysis also revealed that many genes implicated by homology in cutin monomer and cuticular wax biosynthesis also differed in their responses to drought stress between the two sorghum cultivars. Therefore, sorghum cultivars differed in their mechanisms in adjusting chemical profiles of both cutin and cuticular wax under water deficit condition.

GhGPAT12/25 Are Essential for the Formation of Anther Cuticle and Pollen Exine in Cotton (Gossypium hirsutum L.)

Glycerol-3-phosphate acyltransferases (GPATs), critical for multiple biological processes like male fertility, have been extensively characterized. However, their precise functions and underlying regulatory mechanism in cotton anther development are unclear. This research demonstrated the importance of GhGPAT12/25 (a paralogs pair on A12/D12 sub-chromosome of cotton) to regulate the degradation of tapetum, anther cuticle formation, and pollen exine development. GhGPAT12 and GhGPAT25 exhibited specifically detected transcripts in tapetum and pollen exine during the early anther developmental stages. GhGPAT12/25 are sn-2 glycerol-3-phosphate acyltransferases and can transfer the acyl group of palmitoyl-CoA to glycerol-3-phosphate (G3P). CRISPR/Cas9-mediated knockout identified the functional redundancy of GhGPAT12 and GhGPAT25. Knockout of both genes caused completely male sterility associated with abnormal anther cuticle, swollen tapetum, and inviable microspores with defective exine and irregular unrestricted shape. RNA-seq analysis showed that the loss of function of GhGPAT12/25 affects the processes of wax metabolic, glycerol monomer biosynthesis, and transport. Consistently, cuticular waxes were dramatically reduced in mutant anthers. Yeast one-hybrid system (Y1H), virus-induced gene silencing (VIGS), and dual-luciferase (LUC) assays illustrated that GhMYB80s are likely to directly activate the expression of GhGPAT12/25. This study provides important insights for revealing the regulatory mechanism underlying anther development in cotton.

Cutin Synthesis in Developing, Field-Grown Apple Fruit Examined by External Feeding of Labelled Precursors

An intact skin is essential in high-quality apples. Ongoing deposition of cuticular material during fruit development may decrease microcracking. Our objective was to establish a system for quantifying cutin and wax deposition in developing apple fruit. Oleic acid (13C and 14C labelled) and palmitic acid (14C labelled) were fed to developing apples and the amounts incorporated in the cutin and wax fractions were quantified. The incorporation of 14C oleic acid (C18) was significantly higher than that of 14C palmitic acid (C16) and the incorporation in the cutin fraction exceeded that in the wax fraction. The amount of precursor incorporated in the cutin increased asymptotically with time, but the amount in the wax fraction remained about constant. Increasing the concentration of the precursor applied generally increased incorporation. Incorporation in the cutin fraction was high during early development (43 days after full bloom) and decreased towards maturity. Incorporation was higher from a dilute donor solution (infinite dose feeding) than from a donor solution subjected to drying (finite dose feeding) or from perfusion of the precursor by injection. Feeding the skin of a developing apple with oleic acid resulted in significant incorporation in the cutin fraction under both laboratory and field conditions.

Structural Insights into Carboxylic Polyester-Degrading Enzymes and Their Functional Depolymerizing Neighbors

Esters are organic compounds widely represented in cellular structures and metabolism, originated by the condensation of organic acids and alcohols. Esterification reactions are also used by chemical industries for the production of synthetic plastic polymers. Polyester plastics are an increasing source of environmental pollution due to their intrinsic stability and limited recycling efforts. Bioremediation of polyesters based on the use of specific microbial enzymes is an interesting alternative to the current methods for the valorization of used plastics. Microbial esterases are promising catalysts for the biodegradation of polyesters that can be engineered to improve their biochemical properties. In this work, we analyzed the structure-activity relationships in microbial esterases, with special focus on the recently described plastic-degrading enzymes isolated from marine microorganisms and their structural homologs. Our analysis, based on structure-alignment, molecular docking, coevolution of amino acids and surface electrostatics determined the specific characteristics of some polyester hydrolases that could be related with their efficiency in the degradation of aromatic polyesters, such as phthalates.

Molecular dynamics investigation of the interaction between Colletotrichum capsici cutinase and berberine suggested a mechanism for reduced enzyme activity

Berberine is a promising botanical pesticide against fungal plant pathogens. However, whether berberine inhibits the invasion of fungal pathogen across plant surface remains unclear. Here we demonstrated that the enzyme activities of purified cutinase from fungal pathogen Colletotrichum capsici were partially inhibited in presence of berberine toward different substrates. Molecular dynamics simulation results suggested the rigidity of cutinase was decreased with berberine added into the system. Interestingly, aggregations of berberine to the catalytic center of cutinase were observed, and stronger hydrophobic interactions were detected between key residue His 208 and berberine with concentrations of berberine increased. More importantly, this hydrophobic interaction conferred conformational change of the imidazole ring of His 208, which swung out of the catalytic center to an inactive mode. In summary, we provided the molecular mechanism of the effect of berberine on cutinase from C. capsici.

The Cutinase Bdo_10846 Play an Important Role in the Virulence of Botryosphaeria dothidea and in Inducing the Wart Symptom on Apple Plant

Botryosphaeria dothidea is a pathogen with worldwide distribution, infecting hundreds of species of economically important woody plants. It infects and causes various symptoms on apple plants, including wart and canker on branches, twigs, and stems. However, the mechanism of warts formation is unclear. In this study, we investigated the mechanism of wart formation by observing the transection ultrastructure of the inoculated cortical tissues at various time points of the infection process and detecting the expression of genes related to the pathogen pathogenicity and plant defense response. Results revealed that wart induced by B. dothidea consisted of proliferous of phelloderm cells, the newly formed secondary phellem, and the suberized phelloderm cells surrounding the invading mycelia. The qRT-PCR analysis revealed the significant upregulation of apple pathogenesis-related and suberification-related genes and a pathogen cutinase gene Bdo_10846. The Bdo_10846 knockout transformants showed reduced cutinase activity and decreased virulence. Transient expression of Bdo_10846 in Nicotiana benthamiana induced ROS burst, callose formation, the resistance of N. benthamiana to Botrytis cinerea, and significant upregulation of the plant pathogenesis-related and suberification-related genes. Additionally, the enzyme activity is essential for the induction. Virus-induced gene silencing demonstrated that the NbBAK1 and NbSOBIR1 expression were required for the Bdo_10846 induced defense response in N. benthamiana. These results revealed the mechanism of wart formation induced by B. dothidea invasion and the important roles of the cutinase Bdo_10846 in pathogen virulence and in inducing plant immunity.

Raman imaging reveals in-situ microchemistry of cuticle and epidermis of spruce needles

BACKGROUND

The cuticle is a protective layer playing an important role in plant defense against biotic and abiotic stresses. So far cuticle structure and chemistry was mainly studied by electron microscopy and chemical extraction. Thus, analysing composition involved sample destruction and the link between chemistry and microstructure remained unclear. In the last decade, Raman imaging showed high potential to link plant anatomical structure with microchemistry and to give insights into orientation of molecules. In this study, we use Raman imaging and polarization experiments to study the native cuticle and epidermal layer of needles of Norway spruce, one of the economically most important trees in Europe. The acquired hyperspectral dataset is the basis to image the chemical heterogeneity using univariate (band integration) as well as multivariate data analysis (cluster analysis and non-negative matrix factorization).

RESULTS

Confocal Raman microscopy probes the cuticle together with the underlying epidermis in the native state and tracks aromatics, lipids, carbohydrates and minerals with a spatial resolution of 300 nm. All three data analysis approaches distinguish a waxy, crystalline layer on top, in which aliphatic chains and coumaric acid are aligned perpendicular to the surface. Also in the lipidic amorphous cuticle beneath, strong signals of coumaric acid and flavonoids are detected. Even the unmixing algorithm results in mixed endmember spectra and confirms that lipids co-locate with aromatics. The underlying epidermal cell walls are devoid of lipids but show strong aromatic Raman bands. Especially the upper periclinal thicker cell wall is impregnated with aromatics. At the interface between epidermis and cuticle Calcium oxalate crystals are detected in a layer-like fashion. Non-negative matrix factorization gives the purest component spectra, thus the best match with reference spectra and by this promotes band assignments and interpretation of the visualized chemical heterogeneity.

CONCLUSIONS

Results sharpen our view about the cuticle as the outermost layer of plants and highlight the aromatic impregnation throughout. In the future, developmental studies tracking lipid and aromatic pathways might give new insights into cuticle formation and comparative studies might deepen our understanding why some trees and their needle and leaf surfaces are more resistant to biotic and abiotic stresses than others.

Cutinases from thermophilic bacteria (actinomycetes): From identification to functional and structural characterization

Thermophilic cutinases are mainly obtained from thermophilic actinomycetes, and are categorized into two groups, i.e., those with higher (>70°C) or lower (<70°C) thermostabilities. The thermostabilities of cutinases are highly relevant to their ability to degrade polyethylene terephthalate (PET). Many crystal structures of thermophilic cutinases have been solved, showing that their overall backbone structures are identical, irrespective of their ability to hydrolyze PET. One of the unique properties of cutinases is that metal ion-binding on the enzyme's surface both elevates their melting temperatures and activates the enzyme. In this chapter, we introduce the methodology for the identification and cloning of thermophilic cutinases from actinomycetes. For detailed characterization of cutinases, we describe the approach to analyze the intricate dynamics of the enzyme, based on its crystal structures complexed with metal ions and model substrates using a combination of experimental and computational techniques.

Degradation of a Main Plastic Pollutant Polyethylene Terephthalate by Two Distinct Proteases (Neprilysin and Cutinase-like Enzyme)

In this DFT study, hydrolysis of polyethylene terephthalate (PET), a major cause of plastic pollution, by two distinct enzymes, neprilysin (NEP, a mononuclear metalloprotease) and cutinase-like enzyme (CLE, a serine protease), has been investigated. These enzymes utilize different mechanisms for the degradation of PET. NEP uses either the metal-bound hydroxide attack (MH) mechanism or reverse protonation (RP) mechanism, while CLE utilizes a general acid/base mechanism that includes acylation and deacylation processes. Additionally, the RP mechanism of NEP can proceed through three pathways, RP0, RP1, and RP2. The DFT calculations predict that, among all these mechanisms, the MH mechanism is the energetically most favorable one for the NEP enzyme. In comparison, CLE catalyzes this reaction with a significantly higher barrier. These results suggest that the Lewis acid and nucleophile activations provided by the Zn metal center of NEP are more effective than the hydrogen bonding interactions afforded by the catalytic Ser85-His180-Asp165 triad of CLE. They have provided intrinsic details regarding PET degradation and will pave the way for the design of efficient metal-based catalysts for this critical reaction.

Evaluation of microalgae polysaccharides as biostimulants of tomato plant defense using metabolomics and biochemical approaches

Microalgal polysaccharides (PSs) may be an effective elicitor agent that can efficiently protect plants against biotic stresses. In this study, wee investigates, the effect of PS obtained from microalgae and cyanobacteria (D. salina MS002, P. tricorontum MS023, Porphyridium sp. MS081, Desmodesmus sp., D. salina MS067 and A. platensis MS001) on the biochemical and metabolomics markers linked to defense pathways in tomato plants. The phenylalanine ammonia lyase (PAL), chitinase, 1,3-beta-glucanase and peroxidase (POX) activities have been improved in tomato plants leaves treated by polysaccharides extracted from P. triocnutum (238.26%); Desmodesmus sp. (19.95%); P. triocnutum (137.50%) and Porphyridium sp. (47.28%) respectively. For proteins, polyphenols and H2O2, the maximum effect was induced by D. salina 067 (55.01%), Porphyridium sp. (3.97%) and A. platensis (35.08%) respectively. On the other hand, Gas Chromatography-mass spectrometry (GC-MS) metabolomics analysis showed that PSs induced the modification of metabolite profile involved in the wax construction of tomato leaves, such as fatty acids, alkanes, alkenes and phytosterol. PS treatments improved the accumulation of fatty acids C16:3, C18:2 and C18:3 released from the membrane lipids as precursors of oxylipin biosynthesis which are signaling molecules of plant defense. In addition, PS treatment induced the accumulation of C18:0 and Azelaic acid which is a regulator of salicylic acid-dependent systemic acquired resistance. However, molecular and metabolic studies can determine more precisely the mode of action of microalgal polysaccharides as biostimulants/elicitors plant defense.

Chemical composition of leaf cutin in six Quercus suber provenances

The cutin content and composition of cork oak (Quercus suber) leaves was determined in six provenances with different seed geographical origin spreading across the species natural distribution. The cutin layer on the leaf surface was on average 518 μg/cm² of leaf area and represented 6.7% of the leaf dry weight, with no significant differences among provenances. Cutin depolymerisation was carried out by transesterification on whole leaves. The cutin composition of cork oak leaves is presented here for the first time. It is essentially composed of long-chain aliphatic ω-hydroxy fatty acids (44.4% of the total monomers), mostly with mid-chain hydroxyl and epoxy groups, fatty acids (20.7%), and a smaller proportion of α,ω-dicarboxylic acids (6.5%). The predominant compounds are 10,16-dihydroxy hexadecanoic acid (17.7-25.2%) and 9,10,18-trihydroxyoctadecanoic acid (15.6-18.0%). Alkanols represent 2.8% and aromatic compounds 12.8%, mainly coumarates. Isolation of cuticles from Q. suber leaves was performed using an enzymatic separation procedure and the fragments were analysed. Cuticle isolation is difficult and direct depolymerisation applied to whole leaves proved a suitable method to study cutin monomeric composition, which did not differ substantially to that of the isolated cuticles. No differences between provenances were found regarding cutin content and composition, thereby ruling out a significant genetic determination of these traits, but rather a highly adaptive phenotypic plasticity of cork oak. Although overall similar in their chemical nature, cutin and suberin in cork oak differ in the proportion of the major chemical families, i.e. ω-hydroxy acids, α,ω-diacids, and fatty acids.

Russeting in Apple is Initiated after Exposure to Moisture Ends: Molecular and Biochemical Evidence

Exposure of the fruit surface to moisture during early development is causal in russeting of apple (Malus × domestica Borkh.). Moisture exposure results in formation of microcracks and decreased cuticle thickness. Periderm differentiation begins in the hypodermis, but only after discontinuation of moisture exposure. Expressions of selected genes involved in cutin, wax and suberin synthesis were quantified, as were the wax, cutin and suberin compositions. Experiments were conducted in two phases. In Phase I (31 days after full bloom) the fruit surface was exposed to moisture for 6 or 12 d. Phase II was after moisture exposure had been discontinued. Unexposed areas on the same fruit served as unexposed controls. During Phase I, cutin and wax synthesis genes were down-regulated only in the moisture-exposed patches. During Phase II, suberin synthesis genes were up-regulated only in the moisture-exposed patches. The expressions of cutin and wax genes in the moisture-exposed patches increased slightly during Phase II, but the levels of expression were much lower than in the control patches. Amounts and compositions of cutin, wax and suberin were consistent with the gene expressions. Thus, moisture-induced russet is a two-step process: moisture exposure reduces cutin and wax synthesis, moisture removal triggers suberin synthesis.

Structural Studies of the Cutin from Two Apple Varieties: Golden Delicious and Red Delicious (Malus domestica)

The cuticle, a protective cuticular barrier present in almost all primary aerial plant organs, has a composition that varies between plant species. As a part of the apple peel, cuticle and epicuticular waxes have an important role in the skin appearance and quality characteristic in fresh fruits destined for human consumption. The specific composition and structural characteristics of cutin from two apple varieties, “golden delicious” and “red delicious”, were obtained by enzymatic protocols and studied by means of cross polarization magic angle spinning nuclear magnetic resonance (CP-MAS ¹³C NMR), attenuated total reflection infrared spectroscopy (ATR-FTIR), and mass spectrometry, and were morphologically characterized by specialized microscopy techniques (atomic force microscopy (AFM), confocal laser scanning microscopy (CLMS), and scanning electron microscopy (SEM)). According to CP-MAS ¹³C NMR and ATR-FTIR analysis, cutins from both varieties are mainly composed of aliphatics and a small difference is shown between them. This was corroborated from the hydrolyzed cutins analysis by mass spectrometry, where 9,10,18-trihydroxy-octadecanoic acid; 10,20-Dihydroxy-icosanoic acid; 10,16-dihydroxy hexadecenoic acid (10,16-DHPA); 9,10-epoxy-12-octadecenoic acid; and 9,10-epoxy-18-hydroxy-12-octadecenoic acid were the main monomers isolated. The low presence of polysaccharides and phenolics in the cutins obtained could be related to the low elastic behavior of this biocomposite and the presence of cracks in the apple cutin’s surface. These cracks have an average depth of 1.57 µm ± 0.57 in the golden apple, and 1.77 µm ± 0.64 in those found in the red apple. The results obtained in this work may facilitate a better understanding that mechanical properties of the apple fruit skin are mainly related to the specific aliphatic composition of cutin and help to much better investigate the formation of microcracks, an important symptom of russet formation.

Microbial and Enzymatic Degradation of Synthetic Plastics

Synthetic plastics are pivotal in our current lifestyle and therefore, its accumulation is a major concern for environment and human health. Petroleum-derived (petro-)polymers such as polyethylene (PE), polyethylene terephthalate (PET), polyurethane (PU), polystyrene (PS), polypropylene (PP), and polyvinyl chloride (PVC) are extremely recalcitrant to natural biodegradation pathways. Some microorganisms with the ability to degrade petro-polymers under in vitro conditions have been isolated and characterized. In some cases, the enzymes expressed by these microbes have been cloned and sequenced. The rate of polymer biodegradation depends on several factors including chemical structures, molecular weights, and degrees of crystallinity. Polymers are large molecules having both regular crystals (crystalline region) and irregular groups (amorphous region), where the latter provides polymers with flexibility. Highly crystalline polymers like polyethylene (95%), are rigid with a low capacity to resist impacts. PET-based plastics possess a high degree of crystallinity (30-50%), which is one of the principal reasons for their low rate of microbial degradation, which is projected to take more than 50 years for complete degraded in the natural environment, and hundreds of years if discarded into the oceans, due to their lower temperature and oxygen availability. The enzymatic degradation occurs in two stages: adsorption of enzymes on the polymer surface, followed by hydro-peroxidation/hydrolysis of the bonds. The sources of plastic-degrading enzymes can be found in microorganisms from various environments as well as digestive intestine of some invertebrates. Microbial and enzymatic degradation of waste petro-plastics is a promising strategy for depolymerization of waste petro-plastics into polymer monomers for recycling, or to covert waste plastics into higher value bioproducts, such as biodegradable polymers via mineralization. The objective of this review is to outline the advances made in the microbial degradation of synthetic plastics and, overview the enzymes involved in biodegradation.

Lipid metabolism is involved in male fertility regulation of the photoperiod- and thermo sensitive genic male sterile rice line Peiai 64S

Peiai 64S (PA64S) is a photoperiod- and thermo sensitive genic male sterile (PTGMS) rice line that has been widely applied in two-line hybrid rice breeding. The male fertility mechanism of PTGMS has always been the research focus. We obtained fertile PA64S (F) and sterile fertile PA64S (S) plants at 21℃ and 28℃, respectively. Here, we analyzed the development of anthers and pollen grains of PA64S (S) and found that the degradation of tapetum and sporopollenin accumulation of pollen exine was abnormal. The content of lipid components in PA64S (F) and PA64S (S) were different by LC-MS, among which sterols, (O-acyl) ω-hydroxy fatty acids, ceramide, and other lipid components were upregulated in PA64S (F). The results of transcriptome showed that many significantly different genes were enriched in the lipid metabolism pathways. Additionally, lipid synthesis and transport genes were downregulated in PA64S (S). In summary, the differences of the PA64S fertility under different temperatures were analyzed through multi-levels comparison. These results suggest that lipid synthesis and transport during PA64S anther development affects the lipid accumulation of pollen exine, and ultimately affected fertility. The differences in lipids content may also be a factor affecting PA64S pollen fertility.

Viburnum tinus Fruits Use Lipids to Produce Metallic Blue Structural Color

Viburnum tinus is an evergreen shrub that is native to the Mediterranean region but cultivated widely in Europe and around the world. It produces ripe metallic blue fruits throughout winter [1]. Despite its limited fleshy pulp [2], its high lipid content [3] makes it a valuable resource to the small birds [4] that act as its seed-dispersers [5]. Here, we find that the metallic blue appearance of the fruits is produced by globular lipid inclusions arranged in a disordered multilayer structure. This structure is embedded in the cell walls of the epicarp and underlaid with a dark layer of anthocyanin pigments. The presence of such large, organized lipid aggregates in plant cell walls represents a new mechanism for structural coloration and may serve as an honest signal of nutritional content.

The R2R3-MYB transcription factor AtMYB49 modulates salt tolerance in Arabidopsis by modulating the cuticle formation and antioxidant defence

Salt stress activates defence responses in plants, including changes in leaf surface structure. Here, we showed that the transcriptional activation of cutin deposition and antioxidant defence by the R2R3-type MYB transcription factor AtMYB49 contributed to salt tolerance in Arabidopsis thaliana. Characterization of loss-of-function myb49 mutants, and chimeric AtMYB49-SRDX-overexpressing SRDX49 transcriptional repressor and AtMYB49-overexpressing (OX49) overexpressor plants demonstrated a positive role of AtMYB49 in salt tolerance. Transcriptome analysis revealed that many genes belonging to the category "cutin, suberin and wax biosyntheses" were markedly up-regulated and down-regulated in OX49 and SRDX49 plants, respectively, under normal and/or salt stress conditions. Some of these differentially expressed genes, including MYB41, ASFT, FACT and CYP86B1, were also shown to be the direct targets of AtMYB49 and activated by AtMYB49. Biochemical analysis indicated that AtMYB49 modulated cutin deposition in the leaves. Importantly, cuticular transpiration, chlorophyll leaching and toluidine blue-staining assays revealed a link between increased AtMYB49-mediated cutin deposition in leaves and enhanced salt tolerance. Additionally, increased AtMYB49 expression elevated Ca²⁺ level in leaves and improved antioxidant capacity by up-regulating genes encoding peroxidases and late embryogenesis abundant proteins. These results suggest that genetic manipulation of AtMYB49 may provide a novel way to improve salt tolerance in plants.

Cuticular wax coverage and its transpiration barrier properties in Quercus coccifera L. leaves: does the environment matter?

Plants prevent uncontrolled water loss by synthesizing, depositing and maintaining a hydrophobic layer over their primary aerial organs-the plant cuticle. Quercus coccifera L. can plastically respond to environmental conditions at the cuticular level. When exposed to hot summer conditions with high vapour-pressure deficit (VPD) and intense solar radiation (Mediterranean atmospheric conditions; MED), this plant species accumulates leaf cuticular waxes even over the stomata, thereby decreasing transpirational water loss. However, under mild summer conditions with moderate VPD and regular solar radiation (temperate atmospheric conditions; TEM), this effect is sharply reduced. Despite the ecophysiological importance of the cuticular waxes of Q. coccifera, the wax composition and its contribution to avoiding uncontrolled dehydration remain unknown. Thus, we determined several leaf traits for plants exposed to both MED and TEM conditions. Further, we qualitatively and quantitatively investigated the cuticular lipid composition by gas chromatography. Finally, we measured the minimum leaf conductance (gmin) as an indicator of the efficacy of the cuticular transpiration barrier. The MED leaves were smaller, stiffer and contained a higher load of cuticular lipids than TEM leaves. The amounts of leaf cutin and cuticular waxes of MED plants were 1.4 times and 2.6 times higher than that found for TEM plants, respectively. In detail, MED plants produced higher amounts of all compound classes of cuticular waxes, except for the equivalence of alkanoic acids. Although MED leaves contained higher cutin and cuticular wax loads, the gmin was not different between the two habitats. Our findings suggest that the qualitative accumulation of equivalent cuticular waxes might compensate for the higher wax amount of MED plants, thereby contributing equally to the efficacy of the cuticular transpirational barrier of Q. coccifera. In conclusion, we showed that atmospheric conditions profoundly affect the cuticular lipid composition of Q. coccifera leaves, but do not alter its transpiration barrier properties.

In situ detection of rice leaf cuticle responses to nitrogen supplies by depth-profiling Fourier transform photoacoustic spectroscopy

Plant cuticle is an important interface on the outmost region of plant and will make the response to environmental changes. However, research about how the variable nutritional status affect plant cuticle is limited. This was the first report about the manners of rice leaf cuticle in answer to different nutritional circumstances of nitrogen detected by the Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS) which with a main superiority for in situ and depth-profiling in mid-infrared range. Rice leaves from the seedlings treated with three nitrogen levels designed as low (22N1), medium (N2) and high (N3) concentration were scanned by three moving mirror velocities (0.32 cm s^-1, 0.47 cm s^-1, and 0.63 cm s^-1) at 900-4000 cm^-1 to acquire the spectra of leaf surfaces. Well-resolved peaks had been detected at 3400, 2800, 1650, 1520 and 1050 cm^-1. Combining with the structures and compositions of cuticle, the spectra recorded with 0.63 cm s^-1 were identified to be from cuticle, and were used to analyze the responses of cuticle. Through curve-fitting, the absorption ratio of the peaks at (cm^-1) 1050/3400, 1050/2800 and 1650/2800 shown regular changes，which were suggested to corresponded with ν(CO)/ν(OH), ν(CO)/ν(CH) and ν(C=C)/ν(CH) mainly. These ratios were supported to reflect the amount or variation of cuticle components, such as cutin, fatty alcohols, acids and unsaturated compounds. It provided insights about how nitrogen affected cuticles and showed great potentials to utilized FTIR-PAS for detecting cuticle variations.