LC- and GC-QTOF-MS as Complementary Tools for a Comprehensive Micropollutant Analysis in Aquatic Systems

New Species and Cytotoxicity Mechanism of Halohydroxybenzonitrile Disinfection Byproducts in Drinking Water

Recently, seven dihalohydroxybenzonitriles (diHHBNs) have been determined as concerning nitrogenous aromatic disinfection byproducts (DBPs) in drinking water. Herein, eight new monohalohydroxybenzonitriles (monoHHBNs), including 3-chloro-2-hydroxybenzonitrile, 5-chloro-2-hydroxybenzonitrile, 3-chloro-4-hydroxybenzonitrile, 3-bromo-2-hydroxybenzonitrile, 5-bromo-2-hydroxybenzonitrile, 3-bromo-4-hydroxybenzonitrile, 5-iodo-2-hydroxybenzonitrile, and 3-iodo-4-hydroxybenzonitrile, were detected and identified in drinking water for the first time. Thereafter, the relative concentration-cytotoxicity contribution of each HHBN was calculated based on the acquired occurrence level and cytotoxicity data in this study, the genome-scale cytotoxicity mechanism was explored, and a quantitative structure-activity relationship (QSAR) model was developed. Results indicated that new monoHHBNs were present in drinking water at concentrations of 0.04-1.83 ng/L and exhibited higher cytotoxicity than some other monohalogenated aromatic DBPs. Notably, monoHHBNs showed concentration-cytotoxicity contribution comparable to diHHBNs, which have been previously identified as potential toxicity drivers in drinking water. Transcriptomic analysis revealed immunotoxicity and genotoxicity as dominant cytotoxicity mechanisms for HHBNs in Chinese hamster ovary (CHO-K1) cells, with potential carcinogenic effects. The QSAR model suggested oxidative stress and cellular uptake efficiency as important factors for their cytotoxicity, highlighting the importance of potential iodinated HHBNs in drinking water, such as 3,5-diiodo-2-hydroxybenzonitrile, for future studies. These findings are meaningful for better understanding the health risk and toxicological significance of HHBNs in drinking water.

Assessment of emerging and persistent contaminants in an anthropogenic-impacted watershed: Application using targeted, non-targeted, and in vitro bioassay techniques

Emerging and persistent contaminants (EPC) pose a significant challenge to water quality monitoring efforts. Effect-based monitoring (EBM) techniques provide an efficient and systematic approach in water quality monitoring, but they tend to be resource intensive. In this study, we investigated the EPC distribution for various land uses using target analysis (TA) and non-target screening (NTS) and in vitro bioassays, both individually and integrated, in the upper Ping River Catchment, northern Thailand. Our findings of NTS showed that urban areas were the most contaminated of all land use types, although agriculture sites had high unexpected pollution levels. We evaluated the reliability of NTS data by comparing it to TA and observed varying inconsistencies likely due to matrix interferences and isobaric compound interferences. Integrating NTS with in vitro bioassays for a thorough analysis posed challenges, primary due to a scarcity of concentration data for key compounds, and potentially additive or non-additive effects of mixture samples that could not be accounted for. While EBM approaches place emphasis on toxic sites, this study demonstrated the importance of considering non-bioactive sites that contain toxic compounds with antagonistic effects that may go undetected by traditional monitoring approaches. The present work emphasizes the importance of improving NTS workflows and ensuring high-quality EBM analyses in future water quality monitoring programs.

Unraveling the fate of 6PPD-Q in aquatic environment: Insights into formation, dissipation, and transformation under natural conditions

The widespread occurrence of N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-Q) in aquatic environments and its hazards to aquatic species underscore the necessity of comprehending its environmental fate. Here, we investigated the transformation from 6PPD to 6PPD-Q and the attenuation of 6PPD-Q in surface water under natural conditions. Contrary to prior findings, this work revealed that 6PPD-Q and its precursor 6PPD-OH/6PPD-(OH)2, were not detected through target analysis and suspect screening during 6PPD transformation in the surface water under the natural conditions. 6PPD-Q predominantly accumulated in TWPs in ambient atmosphere with 1.28 % mass yield from the 6PPD dissipation. Subsequently, 6PPD-Q was eluted from TWPs and released to the water environment. The investigation on the natural attenuation of 6PPD-Q in the surface water demonstrated that direct and indirect photolysis facilitated the rapid dissipation of 6PPD-Q with a half-life of 2.57 h. Utilizing the liquid chromatography high resolution mass spectrometry (LC-HRMS), including both time of flight (TOF) MS and Orbitrap MS, twelve novel transformation products (TPs) of 6PPD-Q were identified by using a comprehensive non-targeted screening strategy. The results from two dimensions gas chromatography (GC×GC) TOF-MS revealed additional two TPs. Based on the molecular structure of TPs, four major pathways of 6PPD-Q attenuation were proposed, including bond cleavage, hydroxylation, quinone cleavage and rearrangement. All TPs were predicted to exhibit lower toxicity, indicating the natural attenuation of 6PPD-Q reduced its toxicity and potential environmental risks. This study provides crucial insights into the environmental fate of 6PPD-Q, highlighting the significance of understanding both its formation from 6PPD and its subsequent attenuation processes under natural conditions.

Developing an Approach for Integrating Chemical Analysis and Transcriptional Changes to Assess Contaminants in Water, Sediment, and Fish

Pharmaceuticals in aquatic environments pose threats to aquatic organisms because of their continuous release and potential accumulation. Monitoring methods for these contaminants are inadequate, with targeted analyses falling short in assessing water quality's impact on biota. The present study advocates for integrated strategies combining suspect and targeted chemical analyses with molecular biomarker approaches to better understand the risks posed by complex chemical mixtures to nontarget organisms. The research aimed to integrate chemical analysis and transcriptome changes in fathead minnows to prioritize contaminants, assess their effects, and apply this strategy in Wascana Creek, Canada. Analysis revealed higher pharmaceutical concentrations downstream of a wastewater-treatment plant, with clozapine being the most abundant in fathead minnows, showing notable bioavailability from water and sediment sources. Considering the importance of bioaccumulation factor and biota-sediment accumulation factor in risk assessment, these coefficients were calculated based on field data collected during spring, summer, and fall seasons in 2021. Bioaccumulation was classified as very bioaccumulative with values >5000 L kg-1, suggesting the ability of pharmaceuticals to accumulate in aquatic organisms. The study highlighted the intricate relationship between nutrient availability, water quality, and key pathways affected by pharmaceuticals, personal care products, and rubber components. Prioritization of these chemicals was done through suspect analysis, supported by identifying perturbed pathways (specifically signaling and cellular processes) using transcriptomic analysis in exposed fish. This strategy not only aids in environmental risk assessment but also serves as a practical model for other watersheds, streamlining risk-assessment processes to identify environmental hazards and work toward reducing risks from contaminants of emerging concern. Environ Toxicol Chem 2024;00:1-22. © 2024 SETAC.

Identification of organic chemical indicators for tracking pollution sources in groundwater by machine learning from GC-HRMS-based suspect and non-target screening data

In this study, the strong analytical power of gas chromatography coupled to a high resolution mass spectrometry (GC-HRMS) in suspect and non-target screening (SNTS) of organic micropollutants was combined with machine learning tools for proposing a novel and robust systematic environmental forensics workflow, focusing on groundwater contamination. Groundwater samples were collected from four different regions with diverse contamination histories (namely oil [OC], agricultural [AGR], industrial [IND], and landfill [LF]), and a total of 252 organic micropollutants were identified, including pharmaceuticals, personal care products, pesticides, polycyclic aromatic hydrocarbons, plasticizers, phenols, organophosphate flame retardants, transformation products, and others, with detection frequencies ranging from 3 % to 100 %. Amongst the SNTS identified compounds, a total of 51 chemical indicators (i.e., OC: 13, LF: 12, AGR: 19, IND: 7) which included level 1 and 2 SNTS identified chemicals were pinpointed across all sampling regions by integrating a bootstrapped feature selection method involving the bootfs algorithm and a partial least squares discriminant analysis (PLS-DA) model to determine potential prevalent contamination sources. The proposed workflow showed good predictive ability (Q2) of 0.897, and the suggested contamination sources were gasoline, diesel, and/or other light petroleum products for the OC region, anthropogenic activities for the LF region, agricultural and human activities for the AGR region, and industrial/human activities for the IND region. These results suggest that the proposed workflow can select a subset of the most diagnostic features in the chemical space that can best distinguish a specific contamination source class.

Aerosolomics based approach to discover source molecular markers: A case study for discriminating residential wood heating vs garden green waste burning emission sources

Biomass burning is a significant source of particulate matter (PM) in ambient air and its accurate source apportionment is a major concern for air quality. The discrimination between residential wood heating (RWH) and garden green waste burning (GWB) particulate matter (PM) is rarely achieved. The objective of this work was to evaluate the potential of non-targeted screening (NTS) analyses using HRMS (high resolution mass spectrometry) data to reveal discriminating potential molecular markers of both sources. Two residential wood combustion appliances (wood log stove and fireplace) were tested under different output conditions and wood moisture content. GWB experiments were carried out using two burning materials (fallen leaves and hedge trimming). PM samples were characterized using NTS approaches with both LC- and GC-HRMS (liquid and gas chromatography-HRMS). The analytical procedures were optimized to detect as many species as possible. Chemical fingerprints obtained were compared combining several multivariate statistical analyses (PCA, HCA and PLS-DA). Results showed a strong impact of the fuel nature and the combustion quality on the chemical fingerprints. 31 and 4 possible markers were discovered as characteristic of GWB and RWH, respectively. Complementary work was attempted to identify potential molecular formulas of the different potential marker candidates. The combination of HRMS NTS chemical characterization with multivariate statistical analyses shows promise for uncovering organic aerosol fingerprinting and discovering potential PM source markers.

Identification of polar organic chemicals in the aquatic foodweb: Combining high-resolution mass spectrometry and trend analysis

Environmental risk assessment of chemical contaminants requires prioritizing of substances taken up by biota as it is a starting point for potential adverse effects. Although knowledge about the occurrence of known chemical pollutants in aquatic organisms has significantly improved during the last decade, there is still a poor understanding for a broad range of more polar compounds. To tackle this issue, we proposed an approach that identifies bioaccumulative and biomagnifiable polar chemicals using liquid chromatography coupled with electrospray ionization to high resolution tandem mass spectrometry (LC-HRMS/MS) and combine it with trend analysis using hierarchical clustering. As a proof-of-concept, this approach was implemented on various organisms and compartments (sediment, litter leaves, periphytic biofilm, invertebrates and fish) collected from a small urban river. HRMS/MS data measured via data-independent acquisition mode were retrospectively analysed using two analytical strategies: (1) retrospective target and (2) suspect/non-target screening. In the retrospective target analysis, 56 of 361 substances spanning a broad range of contaminant classes were detected (i.e. 26 in fish, 18 in macroinvertebrates, 28 in leaves, 29 in periphyton and 32 in sediments, with only 7 common to all compartments), among which 49 could be quantified using reference standards. The suspect screening approach based on two suspect lists (in-house, Norman SusDat) led to the confirmation of 5 compounds with standards (three xenobiotics at level 1 and two lipids at level 2) and tentative identification of seven industrial or natural chemicals at level 2 and 3 through a mass spectra library match. Overall, this proof-of-concept study provided a more comprehensive picture of the exposure of biota to emerging contaminants (i.e., the internal chemical exposome) and potential bioaccumulation or biomagnification of polar compounds along the trophic chain.

Effect-Directed Analysis Combined with Nontarget Screening to Identify Unmonitored Toxic Substances in the Environment

Effect-directed analysis (EDA) combined with nontarget screening (NTS) has established a valuable tool for the identification of unmonitored toxic substances in environmental samples. It consists of three main steps: (1) highly potent fraction identification, (2) toxicant candidate selection, and (3) major toxicant identification. Here, we discuss the methodology, current status, limitations, and future challenges of EDA combined with NTS. This method has been applied successfully to various environmental samples, such as sediments, wastewater treatment plant effluents, and biota. We present several case studies and highlight key results. EDA has undergone significant technological advancements in the past 20 years, with the establishment of its key components: target chemical analysis, bioassays, fractionation, NTS, and data processing. However, it has not been incorporated widely into environmental monitoring programs. We provide suggestions for the application of EDA combined with NTS in environmental monitoring programs and management, with the identification of further research needs.

Catchment area, fate, and environmental risks investigation of micropollutants in Danish wastewater

This study aimed to investigate the spatial distribution of micropollutants in wastewater related to catchment area, and their environmental risks and fate. About 24-h flow proportional effluent (n = 26) wastewater samples were collected from eight WWTPs across Denmark. From five of these WWTPs corresponding influent samples (n = 20) were collected. Samples were enriched by multi-layer solid phase and analysed by liquid chromatography-high-resolution mass spectrometry and comprehensive two-dimensional gas chromatography with high-resolution mass spectrometry detection. We detected and quantified 79 micropollutants from a list of 291 micropollutants in at least one influent or effluent wastewater sample. From this we found that 54 micropollutants decreased in concentrations during wastewater treatment, while O-desmethylvenlafaxine, carbamazepine, amitriptyline, benzothiazole, terbutryn, and citalopram increased in concentrations through the WWTP.The toxicity of effluent wastewater samples was assessed by EC50 using Raphidocelis subcapitata (R. subcapitata) and LC50 using the crustacean Daphnia magna (D. Magna), for which six micropollutants were detected above the predicted no-effect concentration. Our study demonstrates that catchment area influences the micropollutant composition of wastewater. Out of 19 pharmaceuticals, the measured concentration in influent wastewater was predicted within a factor of 10 from sale numbers and human excretion, which demonstrates the strong influence of catchment area on micropollutant composition.

Leached Compounds from Smoked Cigarettes and Their Potential for Bioaccumulation in Rainbow Trout (Oncorhynchus mykiss)

Cigarette butts are one of the most prevalent forms of litter worldwide and may leach toxic compounds when deposited in aquatic environments. Previous studies demonstrated that smoked cigarette leachate is toxic toward aquatic organisms. However, the specific bioavailable chemicals from the leachate and the potential for human and wildlife exposure through the food chain were unknown. Using a nontargeted analytical approach based on GC×GC/TOF-MS, 43 compounds were confirmed to leach from smoked cigarettes when exposed to a water source. Additionally, the bioaccumulation potential of organic contaminants in an edible fish, rainbow trout (Oncorhynchus mykiss), was assessed through direct exposure to the leachate of smoked cigarettes at 0.5 CB/L for 28 days. There was a significant reduction in fish mass among the exposed rainbow trout vs the control group (χ2 (1) = 5.3, p = 0.021). Both nontargeted and targeted chemical analysis of representative fish tissue identified four tobacco alkaloids, nicotine, nicotyrine, myosmine, and 2,2'-bipyridine. Their average tissue concentrations were 466, 55.4, 94.1, and 70.8 ng/g, respectively. This study identifies leached compounds from smoked cigarettes and demonstrates the uptake of specific chemicals in rainbow trout, thus suggesting a potential for accumulation in food webs, resulting in human and wildlife exposure.

Screening and prioritization of organic chemicals in a large river basin by suspect and non-target analysis

Many organic chemicals are present in aquatic environments, but how to screen and prioritize these chemicals has always been a difficult task. Here we investigated organic chemicals in the West River Basin by using a developed non-target identification workflow. A total of 957 chemicals were tentatively identified, with 96 assigned as high confidence levels by matching with reference standards, MassBank spectral library, and using CompTox Chemistry Dashboard database as the compound library for MetFrag. More pesticides and their transformation products (e.g., metolachlor ESA, acetochlor ESA, deethylatrazine, and hydroxyatrazine) were detected in the wet season due to the increasing usage. High detection of pharmaceutical and personal care products and their transformation products in the tributaries was linked to rural farming and human activities. Irbesartan that is used to treat high blood pressure was recognized in the river and positive correlations between some detected chemicals and irbesartan were observed, indicating a domestic wastewater source. Ecological risks of the identified chemicals were calculated by toxicological prioritization ranking schemes, and 24 chemicals showed high ToxPi scores in the river. The results from this study show the presence of a large number of emerging organic chemicals in our waterways, and demonstrated conceptual schemes for integrating risk assessment into a non-target screening workflow.

Chlorinated nucleotides and analogs as potential disinfection byproducts in drinking water

Identification of emerging disinfection byproducts (DBPs) of health relevance is important to uncover the health risk of drinking water observed in epidemiology studies. In this study, mutagenic chlorinated nucleotides were proposed as potential DBPs in drinking water, and the formation and transformation pathways of these DBPs in chlorination of nucleotides were carefully investigated. A total of eleven chlorinated nucleotides and analogs were provisionally identified as potential DBPs, such as monochloro uridine/cytidine/adenosine acid and dichloro cytidine acid, and the formation mechanisms involved chlorination, decarbonization, hydrolysis, oxidation and decarboxylation. The active sites of nucleotides that reacted with chlorine were on the aromatic heterocyclic rings of nucleobases, and the carbon among the two nitrogen atoms in the nucleobases tended to be transformed into carboxyl group or be eliminated, further forming ring-opening or reorganization products. Approximately 0.2-4.0 % (mol/mol) of these chlorinated nucleotides and analogs finally decomposed to small-molecule aliphatic DBPs, primarily including haloacetic acids, trichloromethane, and trichloroacetaldehyde. Eight intermediates, particularly chlorinated imino-D-ribose and imino-D-ribose, were tentatively identified in chlorination of uridine. This study provides the first set of preliminary evidence for indicating the promising occurrence of chlorinated nucleotides and analogs as potential toxicological-relevant DBPs after disinfection of drinking water.

Target and non-target analysis of organochlorine pesticides and their transformation products in an agrochemical-contaminated area

Organochlorine pesticides show biological toxicity and their degradation typically takes many years. Previous studies of agrochemical-contaminated areas have mainly focused on limited target compounds, and emerging pollutants in soil have been overlooked. In this study, we collected soil samples from an abandoned agrochemical-contaminated area. Target analysis and non-target suspect screening by gas chromatography coupled with time-of-flight mass spectrometry were combined for qualitative and quantitative analysis of organochlorine pollutants. Target analysis showed that dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethylene (DDE), and dichlorodiphenyldichloroethane (DDD) were the main pollutants. With concentrations between 3.96 × 10⁶ and 1.38 × 10⁷ ng/g, these compounds posed significant health risks at the contaminated site. Non-target suspect screening identified 126 organochlorine compounds, most of which were chlorinated hydrocarbons and 90% of the compounds contained a benzene ring structure. The possible transformation pathways of DDT were inferred from proven pathways and the compounds identified by non-target suspect screening that had similar structures to DDT. This study will be useful for studies of the degradation mechanism of DDT. Semi-quantitative and hierarchical cluster analysis of compounds in soil showed that the distribution of contaminants in soil was influenced by the types of pollution sources and distance to them. Twenty-two contaminants were found in the soil at relatively high concentrations. The toxicities of 17 of these compounds are currently not known. These results improve our understanding of the environmental behavior of organochlorine contaminants in soil and are useful for further risk assessments of agrochemical-contaminated areas.

New insight into fate and transport of organic compounds from pollution sources to aquatic environment using non-targeted screening: A wastewater treatment plant case study

A variety of chemicals discharged into the aquatic environment by the wastewater treatment plant (WWTP), which is a potential source of hazard to the ecological environment and human health. This study established a novel analytical method for all compounds using non-targeted screening to comprehensively explore the fate and transport of organic compounds from WWTP to aquatic environment. 3967 and 3636 features were detected in WWTP samples and river samples, respectively. Multi-level classification was applied to all identified compounds, and results showed that aliphatics were dominant in both abundance and response, accounting for an average of 35.49 % and 74.10 %, respectively. A total of 88 Emerging Contaminants (ECs), including 22 endocrine disrupting chemicals (EDCs), 12 pharmaceuticals and personal care products (PPCPs), 12 pesticides, 10 volatile organic compounds (VOCs), 5 persistent organic pollutants (POPs) and 27 chemicals with other uses, were identified from all compounds, and their traceability analysis was performed. Furthermore, the contribution rate of organic compounds from WWTP effluent to river was calculated to be 33.60 % by the analysis of source-sink relationship. An in-depth and comprehensive exploration of the fate and transport of all organic compounds will help to provide guidelines for the treatment technologies and achieve the traceability of pollutants.

Comprehensive investigation and risk assessment of organic contaminants in Yellow River Estuary using suspect and nontarget screening strategies

Contaminants of emerging concerns (CECs) include numerous chemicals that may pose known and unknown risks to the ecosystem, and identification and risk ranking of these compounds is essential for the environmental management. In this study, liquid and gas chromatography time-of-flight mass spectrometry (LC-QTOF-MS and GC-QTOF-MS) were used to characterize the occurrence of CECs in the surface water of the Yellow River Estuary (YRE). A total of 295 and 315 chemicals were identified by LC-QTOF-MS and GC-QTOF-MS, respectively. The occurrence of two compounds, erucamide and 2-phenylquinoline, was for the first time reported in the aquatic environment in YRE. The concentrations of 121 CECs, including 35 antibiotics, 49 pesticides and veterinary, 16 polycyclic aromatic hydrocarbons and 21 phthalic acid esters were further quantified by target analysis, which showed the detection of 99 compounds in the surface water in the range of 7.07-4611.26 ng/L. Ecological risks of pollutants based on the risk quotient (RQ) method revealed that 13 pollutants posed ecological risks to the aquatic ecosystem (RQ > 1), and pesticides (n = 12) were the main risk contributors. Here, all CECs data sets were finally transformed and ranked in the framework of the toxicological priority index (ToxPi), and a total of 81 priority control pollutants were identified in the surface water of YRE. This study highlighted the necessity of suspect and nontarget screening for CECs in estuaries, and revealed the importance of localized contamination sources in urban and agricultural environment.

Synergistic effect of environmental food pollutants: Pesticides and marine biotoxins

Emerging marine biotoxins such as ciguatoxins and pyrethroid compounds, widely used in agriculture, are independently treated as environmental toxicants. Their maximum residue levels in food components are set without considering their possible synergistic effects as consequence of their interaction with the same cellular target. There is an absolute lack of data on the possible combined cellular effects that biological and chemical pollutants, may have. Nowadays, an increasing presence of ciguatoxins in European Coasts has been reported and these toxins can affect human health. Similarly, the increasing use of phytosanitary products for control of food plagues has raised exponentially during the last decades due to climate change. The lack of data and regulation evaluating the combined effect of environmental pollutants with the same molecular target led us to analyse their in vitro effects. In this work, the effects of ciguatoxins and pyrethroids in human sodium channels were investigated. The results presented in this study indicate that both types of compounds have a profound synergistic effect in voltage-dependent sodium channels. These food pollutants act by decreasing the maximum peak inward sodium currents and hyperpolarizing the sodium channels activation, effects that are boosted by the simultaneous presence of both compounds. A fact that highlights the need to re-evaluate their limits in feedstock as well as their potential in vivo toxicity considering that they act on the same cellular target. Moreover, this work sets the cellular basis to further apply this type of studies to other water and food pollutants that may act synergistically and thus implement the corresponding regulatory limits taking into account its presence in a healthy diet.

Identification of high-concern organic pollutants in tap waters from the Yangtze River in China based on combined screening strategies

Recently, numerous organic pollutants have been detected in water environment. The safety of our drinking water has attracted widespread attention. Effective methods to screen and identify high-concern substances are urgently needed. In this study, the combined workflow for the detection and identification of high-concern organic chemicals was established and applied to tap water samples from the Yangtze River Basin. The solid phase extraction (SPE) sorbents were compared and evaluated and finally the HLB cartridge was selected as the best one for most of the contaminants. Based on target, suspect and non-target analysis, 3023 chemicals/peaks were detected. Thirteen substances such as diundecyl phthalate (DUP), 2-hydroxyatrazine, dioxoaminopyrine and diethyl-2-phenylacetamide were detected in drinking water in the Yangtze River Basin for the very first time. Based on three kinds of prioritization principles, 49 ubiquitous, 103 characteristic chemicals and 13 inefficiently removed chemicals were selected as high-concern substances. Among them, 8, 31, 9, 3, 4 substances overlapped with the toxic, risky or high-concern chemicals lists in China, America, European Union, Japan, Korea, respectively. Specific management and removal strategies were further recommended. The workflow is efficient for identification of key pollutants.

Evaluation of sample preparation methods for suspect and non-target screening in water, sediment, and biota samples using gas chromatography coupled to high-resolution mass spectrometry

In this study, the sample preparation methods were proposed for the suspect and non-target screening (SNTS) using gas chromatography coupled to high-resolution mass spectrometry in the aquatic environment. The pretreatment methods were evaluated based on detection rates, recoveries, and screening detection limits (SDLs) for 316 substances spiked into surface water, sediment, and biota samples. The detection rates of the spiked compounds were 92.1 % and 98.7 % by the sample preparation methods for water (solid-phase extraction using HLB cartridge) and sediment (ultrasonic extraction (USE) with HLB cartridge clean-up), respectively. Similarly, USE with HLB cartridge clean-up gave the highest detection rate (87.9 %) for biota samples; however, additional pretreatment method using deactivated silica gel clean-up was necessary for the detection of persistent organic pollutants (POPs). The SDL ranges of spiked compounds by the suggested pretreatment methods were 0.01-23.5 ng/L for surface water, 0.02-37.5 ng/g dry weight for sediment, and 0.01-12.2 ng/g wet weight for biota. Although some pollutants, such as POPs had SDLs that were higher than the levels normally detected in the aquatic environment as reported in previous studies, the analytical methods suggested in the present study were satisfactory for the SNTS of most pollutants originated from anthropogenic sources.

The influence of bromide and iodide ions on the sulfamethoxazole (SMX) halogenation during chlorination

Disinfection by-products (DBPs) were produced during the chlorination process, posing a threat to drinking water safety and human health. In the presence of bromide and iodide ions, brominated and iodinated DBPs will be generated, which might be more toxic than the parent compound. However, there are few studies on brominated and iodinated DBPs of antibiotics. Therefore, in this study, the fates of sulfamethoxazole (SMX) during chlorination in different systems (Blank; SMX + NaClO; SMX+ NaClO+ Br^-; SMX+ NaClO+I^-; SMX+ NaClO+ Br^- + I^-) were investigated. In different systems, all the reaction followed a pseudo-first-order kinetics, while the reaction rates of NaClO with SMX were different, the reaction rates were in order of SMX + NaClO + Br^- + I^- > SMX + NaClO + Br^- > SMX + NaClO + I^- > SMX + NaClO. When Br^- and I^- existed simultaneously, the reaction rate was the fastest. Iodide played an important role in oxidation and promoted the chlorination of SMX. SMX mainly underwent S-C cleavage, S-N hydrolysis, desulfonation, and substitution reactions. Nine disinfection by-products, including three reported for the first time, were identified using a non-targeted approach, and degradation pathways were proposed. Furthermore, EPI Suite software was applied to predict the environmental accumulation potential and environmental persistence of the degradation products. The results indicated that SMX and degradation products had little environmental accumulative potential and environmental persistence.

Are resource recovery insects safe for feed and food? A screening approach for bioaccumulative trace organic contaminants

Most bioaccumulation assessments select one or several compound classes a priori for analysis performed by either liquid or gas chromatography coupled with mass spectrometry (LC-MS or GC-MS). When organisms are exposed to complex mixtures of trace organic contaminants (TOrCs), targeted chemical assays limit understanding of contaminant profiles in biological tissues and associated risks. We used a semi-quantitative suspect-screening approach to assess the bioaccumulation potential of diverse TOrCs in black soldier fly larvae (BSFL) using almond hulls (by-products of the booming almond industry in California) as test substrates. BSFL digestion is gaining traction as a resource recovery strategy to generate animal feed from low-value organic wastes. We screened almond hulls from six California farms for the presence of 5728 TOrCs using high resolution mass spectrometry. We then categorized the risk potential of 46 TOrCs detected in the hulls based on their predicted bioaccumulation, persistence, and toxicity in order to select two hulls for an in situ BSFL bioaccumulation screening study. We analyzed larvae tissues and feeding substrate initially and after 14 days of growth using targeted, suspect-screening, and nontarget-screening methods. The survival rate of BSFL in all rearing reactors was greater than 90%, indicating low toxicity of the substrates to BSFL. Esfenvalerate, cyhalothrin, and bifenthrin were the most abundant pyrethroids quantified (81.7 to 381.6 ng/g-dw) in the hulls. Bifenthrin bioaccumulated in BSFL tissues (14-day bioaccumulation factor, BAF, of 2.17 ± 0.24). For nontarget analysis, kendrick mass defect (KMD) analysis of PFAS homologous series revealed hydrogen-substituted perfluoroalkyl carboxylic acids (H-PFCAs) in the hulls and BSFL tissues after growth. Our approach demonstrates the utility of suspect-screening in chemical safety assessments when organic wastes with highly diverse and variable contaminant profiles are used in resource recovery pipelines.

Occurrence and transformation of newly discovered 2-bromo-6-chloro-1,4-benzoquinone in chlorinated drinking water

Halobenzoquinones (HBQs) have been reported as an emerging category of disinfection byproducts (DBPs) in drinking water with relatively high toxicity, and the previously reported HBQs include 2,6-dichloro-1,4-benzoquinone, 2,3,6-trichloro-1,4-benzoquinone, 2,6-dichloro-3-methyl-1,4-benzoquinone, 2,6-dibromo-1,4-benzoquinone, 2,6-diiodo-1,4-benzoquinone, 2-chloro-6-iodo-1,4-benzoquinone, and 2-bromo-6-iodo-1,4-benzoquinone. In this study, another HBQ species, 2-bromo-6-chloro-1,4-benzoquinone (2,6-BCBQ), was newly detected and identified in drinking water. The occurrence frequency and levels of 2,6-BCBQ were investigated, and its cytotoxicity was evaluated. Since the formed 2,6-BCBQ was found to be not stable in chlorination, its transformation kinetics and mechanisms in chlorination were further studied. The results reveal that 2,6-BCBQ was generated from Suwannee River humic acid with concentrations in the range of 4.4-47.9 ng/L during chlorination within 120 h, and it was present in all the tap water samples with concentrations ranging from 1.5 to 15.7 ng/L. Among all the tested bromochloro-DBPs, 2,6-BCBQ showed the highest cytotoxicity on the human hepatoma cells. The transformation of 2,6-BCBQ in chlorination followed a pseudo-first-order decay, which was significantly affected by the chlorine dose, pH, and temperature. Seven polar chlorinated and brominated intermediates (including HBQs, halohydroxybenzoquinones, and halohydroxycyclopentenediones) were detected in chlorinated 2,6-BCBQ samples, according to which the transformation pathways of 2,6-BCBQ in chlorination were proposed. Besides, four trihalomethanes and four haloacetic acids were also generated during chlorination of 2,6-BCBQ with molar transformation percentages of 1.6-13.7%.

Comparative study of neonicotinoid insecticides (NNIs) and NNI-Related substances (r-NNIs) in foodstuffs and indoor dust

Comparative studies of neonicotinoid insecticides (NNIs) and NNI-related substances (r-NNIs) in foodstuffs and indoor dust are rare. Herein, we investigated the feature fragmentations of nine NNIs in high-energy collision dissociation cells via high-resolution orbitrap mass spectrometry and observed that NNIs can consistently generate several feature fragments (e.g., C6H5NCl+, C4H3NSCl+, and C6H5NF3+). Consequently, NNIs and r-NNIs were comprehensively (targeted, suspect, and feature fragment-dependent) detected in 107 foodstuff and 49 indoor dust samples collected from Nanjing City (eastern China). We fully or tentatively identified 9 target NNIs and 5 r-NNIs in these samples. NNIs and r-NNIs were detected in 93.5% of the analyzed foodstuff samples, and high concentrations were detected in vegetables (mean: 409 ng/g wet weight [ww]) and fruits (127 ng/g ww). Regarding indoor dust, imidacloprid and acetamiprid exhibited extremely high detection frequencies and contamination levels, and the highest mean concentrations of NNIs and r-NNIs were detected in dormitory samples. Based on the NNI and r-NNI concentrations in the analyzed samples, the mean estimated daily intake values for Chinese adults and children via dietary intake and dust ingestion were 2080-8190 ng/kg bw/day and 378-2680 pg/kg bw/day, respectively.

The toxicokinetics and risk assessment of pyrethroids pesticide in tilapia (Oreochromis mossambicus) upon short-term water exposure

Pyrethroids pesticides (PPs) are the widely adopted synthetic pesticides for agriculture and fishery. The frequent use of these pesticides leads to the accumulation of residues in the freshwater environments in China, subsequently affecting aquatic organisms and ecosystems. However, there are few reports on the toxicological and risk assessment of aquaculture aquatic products. In this study, the uptake, depuration kinetics and potential risk to human health and ecology of fenpropathrin, cypermethrin, fenvalerate, and deltamethrin were assessed using tilapia. The results indicated that four PPs were readily accumulated by tilapia. The bioconcentration factors (BCF) of the PPs in plasma and muscle were between 71.3 and 2112.1 L/kg and 23.9-295.3 L/kg, respectively. The half-lives (t_1/2) of muscle and plasma were 2.90-9.20 d and 2.57-8.15 d. The risks of PPs residues in the muscle of tilapia and exposed water were evaluated by hazard quotient (HQ) and risk quotient (RQ). Although PPs residues in tilapia had a low dietary risk to human health, the residues in the exposed water had a high ecological risk to fish, daphnia, and green algae. Therefore, assessing the PPs content in freshwater aquaculture and monitoring their dosages and frequencies are highly necessitated to avoid their adverse effect on the aquaculture environment.

Are preserved coastal water bodies in Spanish Mediterranean basin impacted by human activity? Water quality evaluation using chemical and biological analyses

The Spanish Mediterranean basin is particularly susceptible to climate change and human activities, making it vulnerable to the influence of anthropogenic contaminants. Therefore, conducting comprehensive and exhaustive water quality assessment in relevant water bodies of this basin is pivotal. In this work, surface water samples from coastal lagoons or estuaries were collected across the Spanish Mediterranean coastline and subjected to target and suspect screening of 1,585 organic micropollutants by liquid chromatography coupled to ion mobility separation and high resolution mass spectrometry. In total, 91 organic micropollutants could be confirmed and 5 were tentatively identified, with pharmaceuticals and pesticides being the most prevalent groups of chemicals. Chemical analysis data was compared with data on bioanalysis of those samples (recurrent aryl hydrocarbon receptor (AhR) activation, and estrogenic receptor (ER) inhibition in wetland samples affected by wastewater streams). The number of identified organic contaminants containing aromatic rings could explain the AhR activation observed. For the ER antagonistic effects, predictions on estrogenic inhibition potency for the detected compounds were used to explain the activities observed. The integration of chemical analysis with bioanalytical observations allowed a comprehensive overview of the quality of the water bodies under study.

Non-target and suspect-screening analyses of hydroponic soybeans and passive samplers exposed to different watershed irrigation sources

Water scarcity increases the likelihood of irrigating food crops with municipal wastewater that may pose potential dietary risks of regulated and non-regulated organic chemical uptake to edible plant tissues. Only a few studies have used high resolution mass spectrometry (HRMS) to assess the uptake of chemicals of concern into food crops. This study used non-target and suspect-screening analyses to compare total chemical features, tentatively identified chemicals (TICs), and EPA ToxCast chemicals in soybean plants and passive samplers exposed to five different irrigation sources that were collected from an agricultural watershed during mild drought conditions. Secondary-treated municipal wastewater effluent, two surface waters, two ground waters, and deionized municipal tap water were used for two hydroponic experiments: soybean roots and shoots and Composite Integrative Passive Samplers (CIPS) harvested after fourteen days of exposure and soybeans after fifty-six days. CIPS were sealed in separate glass amber jars to evaluate their efficacy to mimic chemical features, TICs, and ToxCast chemical uptake in plant roots, shoots, and beans. Total soybean biomass and water use were greatest for tap water, municipal wastewater, and surface water downstream of the municipal wastewater facility relative to groundwater samples and surface water collected upstream of the wastewater facility. ToxCast chemicals were ubiquitous across watershed irrigation sources in abundance, chemical use category, and number. Wastewater-exposed soybeans had the fewest extractable TICs in plant tissues of all irrigation sources. More ToxCast chemicals were identified in CIPS than extracted from irrigation sources by solid phase extraction. ToxCast chemicals in beans and CIPS were similar in number, chemical use category, and log Kow range. CIPS appear to serve as a useful surrogate for ToxCast chemical uptake in beans, the edible food product.

Current Role of Mass Spectrometry in the Determination of Pesticide Residues in Food

The extensive use of pesticides represents a risk to human health. Consequently, legal frameworks have been established to ensure food safety, including control programs for pesticide residues. In this context, the performance of analytical methods acquires special relevance. Such methods are expected to be able to determine the largest number of compounds at trace concentration levels in complex food matrices, which represents a great analytical challenge. Technical advances in mass spectrometry (MS) have led to the development of more efficient analytical methods for the determination of pesticides. This review provides an overview of current analytical strategies applied in pesticide analysis, with a special focus on MS methods. Current targeted MS methods allow the simultaneous determination of hundreds of pesticides, whereas non-targeted MS methods are now applicable to the identification of pesticide metabolites and transformation products. New trends in pesticide analysis are also presented, including approaches for the simultaneous determination of pesticide residues and other food contaminants (i.e., mega-methods), or the recent application of techniques such as ion mobility–mass spectrometry (IM–MS) for this purpose.

Suspecting screening "known unknown" pesticides and transformation products in soil at pesticide manufacturing sites

The occurrence and risks of pesticides and their transformation products in soil at the manufacturing sites are "known unknowns." In this study, pesticides and their transformation products were screened in soil at 6 pesticide manufacturing sites across China using liquid and gas chromatography coupled with quadrupole time-of-flight mass spectrometry. The screening strategy can correctly identify 75% of 209 pesticides spiked at 50 ng g^-1. A total of 212 pesticides were identified; 23.1% of pesticides detected were above 200 ng g^-1, and the maximum concentration was 1.5 × 10⁵ ng g^-1. The risk quotients of 20% pesticides were greater than 1, and the maximum risk quotient of imidacloprid reached 6.3 × 10⁴. The most recent site showed a larger number of pesticides with higher diversity, whereas older sites were dominated by organochlorine insecticides. The extended screen identified 163 transformation products with concentrations up to 6.6 × 10⁴ ng g^-1. Half of the transformation products had higher concentrations than their parent compounds, and metabolic ratios up to 371 were observed. The results of this study validate the prevalence of pesticides and their transformation products in soil at pesticide manufacturing sites. The results also highlight the importance of comprehensive screening at industrial sites and call for improved management and regulation of pesticide manufacturing, particularly for in-service facilities.

Chemical Characterization and Non-targeted Analysis of Medical Device Extracts: A Review of Current Approaches, Gaps, and Emerging Practices

The developers of medical devices evaluate the biocompatibility of their device prior to FDA's review and subsequent introduction to the market. Chemical characterization, described in ISO 10993-18:2020, can generate information for toxicological risk assessment and is an alternative approach for addressing some biocompatibility end points (e.g., systemic toxicity, genotoxicity, carcinogenicity, reproductive/developmental toxicity) that can reduce the time and cost of testing and the need for animal testing. Additionally, chemical characterization can be used to determine whether modifications to the materials and manufacturing processes alter the chemistry of a patient-contacting device to an extent that could impact device safety. Extractables testing is one approach to chemical characterization that employs combinations of non-targeted analysis, non-targeted screening, and/or targeted analysis to establish the identities and quantities of the various chemical constituents that can be released from a device. Due to the difficulty in obtaining a priori information on all the constituents in finished devices, information generation strategies in the form of analytical chemistry testing are often used. Identified and quantified extractables are then assessed using toxicological risk assessment approaches to determine if reported quantities are sufficiently low to overcome the need for further chemical analysis, biological evaluation of select end points, or risk control. For extractables studies to be useful as a screening tool, comprehensive and reliable non-targeted methods are needed. Although non-targeted methods have been adopted by many laboratories, they are laboratory-specific and require expensive analytical instruments and advanced technical expertise to perform. In this Perspective, we describe the elements of extractables studies and provide an overview of the current practices, identified gaps, and emerging practices that may be adopted on a wider scale in the future. This Perspective is outlined according to the steps of an extractables study: information gathering, extraction, extract sample processing, system selection, qualification, quantification, and identification.

Development and application of an in-house library and workflow for gas chromatography-electron ionization-accurate-mass/high-resolution mass spectrometry screening of environmental samples

This work presents an optimized gas chromatography–electron ionization–high-resolution mass spectrometry (GC-EI-HRMS) screening method. Different method parameters affecting data processing with the Agilent Unknowns Analysis SureMass deconvolution software were optimized in order to achieve the best compromise between false positives and false negatives. To this end, an accurate-mass library of 26 model compounds was created. Then, five replicates of mussel extracts were spiked with a mixture of these 26 compounds at two concentration levels (10 and 100 ng/g dry weight in mussel, 50 and 500 ng/mL in extract) and injected in the GC-EI-HRMS system. The results of these experiments showed that accurate mass tolerance and pure weight factor (combination of reverse-forward library search) are the most critical factors. The validation of the developed method afforded screening detection limits in the 2.5–5 ng range for passive sampler extracts and 1–2 ng/g for mussel sample extracts, and limits of quantification in the 0.6–3.2 ng and 0.1–1.8 ng/g range, for the same type of samples, respectively, for 17 model analytes. Once the method was optimized, an accurate-mass HRMS library, containing retention indexes, with ca. 355 spectra of derivatized and non-derivatized compounds was generated. This library (freely available at https://doi.org/10.5281/zenodo.5647960), together with a modified Agilent Pesticides Library of over 800 compounds, was applied to the screening of passive samplers, both of polydimethylsiloxane and polar chemical integrative samplers (POCIS), and mussel samples collected in Galicia (NW Spain), where a total of 75 chemicals could be identified.

Framework for nontargeted investigation of contaminants released by wildfires into stormwater runoff: Case study in the northern San Francisco Bay area

Wildfires can be extremely destructive to communities and ecosystems. However, the full scope of the ecological damage is often hard to assess, in part due to limited information on the types of chemicals introduced to affected landscapes and waterways. The objective of this study was to establish a sampling, analytical, and interpretive framework to effectively identify and monitor contaminants of emerging concern in environmental water samples impacted by wildfire runoff. A nontargeted analysis consisting of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC × GC/TOF-MS) was conducted on stormwater samples from watersheds in the City of Santa Rosa and Sonoma and Napa Counties, USA, after the three most destructive fires during the October 2017 Northern California firestorm. Chemicals potentially related to wildfires were selected from the thousands of chromatographic features detected through a screening method that compared samples from fire-impacted sites versus unburned reference sites. This screening led to high confidence identifications of 76 potentially fire-related compounds. Authentic standards were available for 48 of these analytes, and 46 were confirmed by matching mass spectra and GC × GC retention times. Of these 46 compounds, 37 had known commercial and industrial uses as intermediates or ingredients in plastics, personal care products, pesticides, and as food additives. Nine compounds had no known uses or sources and may be oxidation products resulting from burning of natural or anthropogenic materials. Preliminary examination of potential toxicity associated with the 46 compounds, conducted via online databases and literature review, indicated limited data availability. Regional comparison suggested that more structural damage may yield a greater number of unique, potentially wildfire-related compounds. We recommend further study of post-wildfire runoff using the framework described here, which includes hypothesis-driven site selection and nontargeted analysis, to uncover potentially significant stormwater contaminants not routinely monitored after wildfires and inform risk assessment. Integr Environ Assess Manag 2021;17:1179-1193. © 2021 SETAC.

Assessment of Environmental Pollution and Human Exposure to Pesticides by Wastewater Analysis in a Seven-Year Study in Athens, Greece

Pesticides have been used in large amounts around the world for decades and are responsible for environmental pollution and various adverse effects on human health. Analysis of untreated wastewater can deliver useful information on pesticides’ use in a particular area and allow the assessment of human exposure to certain substances. A wide-scope screening method, based on liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry, was applied, using both target and suspect screening methodologies. Daily composite influent wastewater samples were collected for seven or eight consecutive days in Athens between 2014 and 2020 and analyzed for 756 pesticides, their environmental transformation products and their human metabolites. Forty pesticides were quantified at mean concentrations up to 4.9 µg/L (tralkoxydim). The most abundant class was fungicides followed by herbicides, insect repellents, insecticides and plant growth regulators. In addition, pesticide transformation products and/or metabolites were detected with high frequency, indicating that research should be focused on them. Human exposure was evaluated using the wastewater-based epidemiology (WBE) approach and 3-ethyl-carbamoyl benzoic acid and cis-1,2,3,6-tetrahydrophthalimide were proposed as potential WBE biomarkers. Wastewater analysis revealed the presence of unapproved pesticides and indicated that there is an urgent need to include more transformation products in target databases.

Passive sampling with suspect screening of polar pesticides and multivariate analysis in river catchments: Informing environmental risk assessments and designing future monitoring programmes

Pollution of surface water by polar pesticides is a major environmental risk, particularly in river catchments where potable water supplies are abstracted. In these cases, there is a need to understand pesticide sources, occurrence and fate. Hence, we developed a novel strategy to improve water quality management at the catchment scale using passive sampling coupled to suspect screening and multivariate analysis. Chemcatcher® passive sampling devices were deployed (14 days) over a 12 month period at eight sites (including a water supply works abstraction site) in the Western Rother, a river catchment in South East England. Sample extracts (n = 197) were analysed using high-resolution liquid chromatography-quadrupole-time-of-flight mass spectrometry and compounds identified against a commercially available database. A total of 128 pesticides from different classes were found. Statistical analysis of the qualitative screening data was used to identify clusters of pesticides with similar spatiotemporal pollution patterns. This enabled pesticide sources and fate to be identified. At the water supply works abstraction site, spot sampling and passive sampling were found to be complementary, however, the passive sampling method in conjunction with suspect screening detected 50 pesticides missed by spot sampling combined with targeted analysis. Geospatial data describing pesticide application rates was found to be poorly correlated to their detection frequency using the Chemcatcher®. Our analysis prioritised 61 pesticides for inclusion in a future water quality risk assessment at the abstraction site. It was also possible to design a seasonal monitoring programme to effectively characterise the spatiotemporal pesticide profiles within the catchment. A work flow of how to incorporate passive sampling coupled to suspect screening into existing regulatory monitoring is proposed. Our novel approach will enable water quality managers to target the mitigation (non-engineered actions) of pesticide pollution within the catchment and hence, to better inform drinking water treatment processes and save on operational costs.

Emerging Contaminants: An Overview of Recent Trends for Their Treatment and Management Using Light-Driven Processes

The management of contaminants of emerging concern (CECs) in water bodies is particularly challenging due to the difficulty in detection and their recalcitrant degradation by conventional means. In this review, CECs are characterized to give insights into the potential degradation performance of similar compounds. A two-pronged approach was then proposed for the overall management of CECs. Light-driven oxidation processes, namely photo/Fenton, photocatalysis, photolysis, UV/Ozone were discussed. Advances to overcome current limitations in these light-driven processes were proposed, focusing on recent trends and innovations. Light-based detection methodology was also discussed for the management of CECs. Lastly, a cost–benefit analysis on various light-based processes was conducted to access the suitability for CECs degradation. It was found that the UV/Ozone process might not be suitable due to the complication with pH adjustments and limited light wavelength. It was found that EEO values were in this sequence: UV only > UV/combination > photocatalyst > UV/O3 > UV/Fenton > solar/Fenton. The solar/Fenton process has the least computed EEO < 5 kWh m−3 and great potential for further development. Newer innovations such as solar/catalyst can also be explored with potentially lower EEO values.

Identification and determination of emerging pollutants in sewage sludge driven by UPLC-QTOF-MS data mining

Sludge from sewage treatment plants (STPs) is recognized as a sink of moderate to high lipophilic compounds resistant to biodegradation. Herein, we investigate the presence of emerging pollutants in sewage sludge combining the information provided by mass spectrometry detection, following ultra-performance liquid chromatography (UPLC), with the use of an accurate spectral database of pesticides and pharmaceuticals. In a first step, the performance of matrix solid-phase dispersion, as sample preparation technique, and two non-target data acquisition strategies (data dependent, DDA, and data independent analysis modes, DIA), used in combination with a UPLC quadrupole time-of-flight system, are assessed using a selection of deuterated compounds added either to freeze-dried sludge samples, or to sludge extracts. Possibilities and limitations of both modes are discussed. Following the DDA approach, a group of 68 micropollutants was identified in sludge from different STPs. Some of them are reported in this compartment for the first time. Finally, semi-quantitative concentration data are reported for a group of 37 pollutants in samples obtained from 16 STPs. Out of them, 10 pharmaceuticals, showing detection frequencies and median sludge residues above 50% and 100 ng g^-1, respectively; are highlighted as pollutants to be monitored in sludge in order to understand their behaviour during the wastewater treatment.

Using Estrogenic Activity and Nontargeted Chemical Analysis to Identify Contaminants in Sewage Sludge

Diverse organic compounds, many derived from consumer products, are found in sewage sludge worldwide. Understanding which of these poses the most significant environmental threat following land application can be investigated through a variety of predictive and cell-based toxicological techniques. Nontargeted analysis using high-resolution mass spectrometry with predictive estrogenic activity modeling was performed on sewage sludge samples from 12 wastewater treatment plants in California. Diisobutyl phthalate and dextrorphan were predicted to exhibit estrogenic activity and identified in >75% of sludge samples, signifying their universal presence and persistence. Additionally, the application of an estrogen-responsive cell bioassay revealed reductions in agonistic activity during mesophilic and thermophilic treatment but significant increases in antagonism during thermophilic treatment, which warrants further research. Ten nontarget features were identified (metoprolol, fenofibric acid, erythrohydrobupropion, oleic acid, mestranol, 4'-chlorobiphenyl-2,3-diol, medrysone, scillarenin, sudan I, and N,O-didesmethyltramadol) in treatment set samples and are considered to have influenced the in vitro estrogenic activity observed. The combination of predictive and in vitro estrogenicity with nontargeted analysis has led to confirmation of 12 estrogen-active contaminants in California sewage sludge and has highlighted the importance of evaluating both agonistic and antagonistic responses when evaluating the bioactivity of complex samples.

Gold nanoparticles-based assays for biodetection in urine

Urine is a biofluid easy to collect through a non-invasive technique that allows collecting a large volume of sample. The use of urine for disease diagnosis is not yet well explored. However, it has gained attention over the last three years. It has been applied in the diagnosis of several illnesses such as kidney disease, bladder cancer, prostate cancer and cardiovascular diseases. In the last decade, gold nanoparticles (Au NPs) have attracted attention in biosensors' development for the diagnosis of diseases due to their electrical and optical properties, ability to conjugate with biomolecules, high sensitivity, and selectivity. Therefore, this article aims to present a comprehensive view of state of the art on the advances made in the quantification of analytes in urinary samples using AuNPs based assays, with a focus on protein analysis. The type of diagnosis methods, the Au NPs synthesis approaches and the strategies for surface modification aiming at selectivity towards the different targets are highlighted.

Identifying Toxicologically Significant Compounds in Urban Wildfire Ash Using In Vitro Bioassays and High-Resolution Mass Spectrometry

Urban wildfires may generate numerous unidentified chemicals of toxicity concern. Ash samples were collected from burned residences and from an undeveloped upwind reference site, following the Tubbs fire in Sonoma County, California. The solvent extracts of ash samples were analyzed using GC- and LC-high-resolution mass spectrometry (HRMS) and using a suite of in vitro bioassays for their bioactivity toward nuclear receptors [aryl hydrocarbon receptor (AhR), estrogen receptor (ER), and androgen receptor (AR)], their influence on the expression of genetic markers of stress and inflammation [interleukin-8 (IL-8) and cyclooxygenase-2 (COX-2)], and xenobiotic metabolism [cytochrome P4501A1 (CYP1A1)]. Genetic markers (CYP1A1, IL-8, and COX-2) and AhR activity were significantly higher with wildfire samples than in solvent controls, whereas AR and ER activities generally were unaffected or reduced. The bioassay responses of samples from residential areas were not significantly different from the samples from the reference site despite differing chemical compositions. Suspect and nontarget screening was conducted to identify the chemicals responsible for elevated bioactivity using the multiple streams of HRMS data and open-source data analysis workflows. For the bioassay endpoint with the largest available database of pure compound results (AhR), nontarget features statistically related to whole sample bioassay response using Spearman's rank-order correlation coefficients or elastic net regression were significantly more likely (by 10 and 15 times, respectively) to be known AhR agonists than the overall population of compounds tentatively identified by nontarget analysis. The findings suggest that a combination of nontarget analysis, in vitro bioassays, and statistical analysis can identify bioactive compounds in complex mixtures.

Screening for More than 1,000 Pesticides and Environmental Contaminants in Cannabis by GC/Q-TOF

A method has been developed to screen cannabis extracts for more than 1,000 pesticides and environmental pollutants using a gas chromatograph coupled to a high-resolution accurate mass quadrupole time-of-flight mass spectrometer (GC/Q-TOF). An extraction procedure was developed using acetonitrile with solid phase extraction cleanup. Before analysis, extracts were diluted 125:1 with solvent. Two data mining approaches were used together with a retention-time-locked Personal Compound Database and Library (PCDL) containing high-resolution accurate mass spectra for pesticides and other environmental pollutants. (1) A Find-by-Fragments (FbF) software tool extracts several characteristic exact mass ions within a small retention time window where the compound elutes. For each compound in the PCDL, the software evaluates the peak shape and retention time of each ion as well as the monoisotopic exact mass, ion ratios, and other factors to decide if the compound is present or not. (2) A separate approach used Unknowns Analysis (UA) software with a peak-finding algorithm called SureMass to deconvolute peaks in the chromatogram. The accurate mass spectra were searched against the PCDL using spectral matching and retention time as filters. A subset PCDL was generated containing only pesticides that are most likely to be found on foods in the US. With about 250 compounds in the smaller PCDL, there were fewer hits for non-pesticides, and data review was much faster. Organically grown cannabis was used for method development. Twenty-one confiscated cannabis samples were analyzed and ten were found to have no detectable pesticides. The remaining 11 samples had at least one pesticide and one sample had seven detectable residues. Quantitative analysis was run on the confiscated samples for a subset of the pesticides found by screening. Two cannabis samples had residues of carbaryl and malathion that were estimated to be about 10 times greater than the highest US Environmental Protection Agency tolerance set for food and about 4,000 times greater than the Canadian maximum residue limits for dried cannabis flower.

Retrospective screening of high-resolution mass spectrometry archived digital samples can improve environmental risk assessment of emerging contaminants: A case study on antifungal azoles

Environmental risk assessment associated with aquatic and terrestrial contamination is mostly based on predicted or measured environmental concentrations of a limited list of chemicals in a restricted number of environmental compartments. High resolution mass spectrometry (HRMS) can provide a more comprehensive picture of exposure to harmful chemicals, particularly through the retrospective analysis of digitally stored HRMS data. Using this methodology, our study characterized the contamination of various environmental compartments including 154 surface water, 46 urban effluent, 67 sediment, 15 soil, 34 groundwater, 24 biofilm, 41 gammarid and 49 fish samples at 95 sites widely distributed over the Swiss Plateau. As a proof-of-concept, we focused our investigation on antifungal azoles, a class of chemicals of emerging concern due to their endocrine disrupting effects on aquatic organisms and humans. Our results demonstrated the occurrence of antifungal azoles and some of their (bio)transformation products in all the analyzed compartments (0.1-100 ng/L or ng/g d.w.). Comparison of actual and predicted concentrations showed the partial suitability of level 1 fugacity modelling in predicting the exposure to azoles. Risk quotient calculations additionally revealed risk of exposure especially if some of the investigated rivers and streams are used for drinking water production. The case study clearly shows that the retrospective analysis of HRMS/MS data can improve the current knowledge on exposure and the related risks to chemicals of emerging concern and can be effectively employed in the future for such purposes.

Performance of the organic-diffusive gradients in thin-films passive sampler for measurement of target and suspect wastewater contaminants

Although passive sampling is widely accepted as an excellent tool for environmental monitoring, their integration with suspect or non-targeted screening by high-resolution mass spectrometry has been limited. This study describes the application of the organic-diffusive gradients in thin-films (o-DGT) passive sampler as a tool for accurate measurement of both targeted and suspect polar organic contaminants (primarily pharmaceuticals) in wastewater. First, performance of o-DGT was assessed alongside the polar organic chemical integrative sampler (POCIS) and active sampling at two wastewater treatment facilities using targeted analyses. Overall, water concentrations measured by o-DGT, POCIS, and 24-hr integrative active samples were in good agreement with each other. There were exceptions, including a systematic difference between o-DGT and POCIS at certain sites that we propose was a result of site-specific conditions and a difference in sampling rates between the two techniques. The second component of this work involved suspect screening of the o-DGT extracts using high-resolution, high mass accuracy quadrupole time-of-flight mass spectrometry (QTOF). Lamotrigine, venlafaxine, and des-methylvenlafaxine were three suspect compounds identified and selected as proof-of-concept case studies to determine the feasibility and accuracy of o-DGT for estimating water concentrations based upon predicted sampling rates using a previously validated o-DGT diffusion model. Semi-quantification of the suspect compounds was conducting using an average surrogate response factor based on the suite of compounds measured by the targeted analyses. This, combined with the modelled sampling rates provided time-weighted average wastewater concentrations of the identified suspects within a factor of 2 of the true value, confirmed by isotope dilution with mass labelled internal surrogates. To the knowledge of the authors, this work is the first to demonstrate the utility of the o-DGT passive sampler as a potential environmental screening tool that can be integrated into the rapidly advancing field of non-targeted high resolution mass spectrometry.

Assessment of cypermethrin induced hepatic toxicity in Catla catla: A multiple biomarker approach

The study was designed to evaluate chronic toxicity of pyrethroid pesticide cypermethrin through biochemical, histopathological, ultrastructural and molecular biomarkers in liver of freshwater carp Catla catla. The fish were exposed to two sub-lethal concentrations (0.21 μg/L and 0.41 μg/L) for a period of 45 days. Compared to the control, a significant (p < 0.05) increase in the activity of enzymatic antioxidants catalase (CAT), superoxide dismutase (SOD) and glutathione-S-transferase (GST), and glutathione content (GSH) was registered after initial 15 days of exposure to the toxicant, followed by decline on 30th and 45th day. Whereas, MDA level remained elevated throughout the exposure duration at both the tested concentrations. Light microscopy revealed changes like sinusoidal dilation, vacuolation, pycnosis, karyolysis, nuclear pleomorphism, lymphocyte infiltration in liver of the exposed fish, with highest mean degree of tissue change (DTC) value of 58.6 ± 3.19 on 45th day. Ultrastructurally, cytopasmic vacuolation, reduced glycogen granules, dilated RER, deformed nuclear membrane, swollen & distorted mitochondria and augmentation in lipid bodies were the prominently observed cytopathological alterations. These anomalies increased in time-concentration dependent manner, being most severe after 45 days at higher concentration. The gene expression levels of Gadd-45α and Bcl-2 depicted altered patterns. Gadd-45α exhibited significant upregulation by 45th day, while Bcl-2 demonstrated initial upregulation, with subsequent downregulation on 30th and 45th day. Principal component analysis (PCA) generated two components, PC1 (SOD, GSH, MDA and DTC) and PC2 (CAT and GST). The findings suggest that cypermethrin inflicts marked hepatototoxic effects on Catla catla even at sub-lethal concentrations.

Formation and Decomposition of New Iodinated Halobenzoquinones during Chloramination in Drinking Water

Previously four chlorinated and brominated halo-benzoquinones were reported as new disinfection byproducts (DBPs) in drinking water, which have drawn great concern due to their high toxicity. In this study, three new iodinated halobenzoquinones, including 2-chloro-6-iodo-1,4-benzoquinone (2,6-CIBQ), 2-bromo-6-iodo-1,4-benzoquinone (2,6-BIBQ), and 2,6-diiodo-1,4-benzoquinone (2,6-DIBQ), were detected and identified in drinking water for the first time. Their cytotoxicity was evaluated, and their formation under various conditions was examined. Since they were not stable during chloramination, their further decomposition during chloramination was also explored. The results indicated that the concentrations of 2,6-CIBQ, 2,6-BIBQ, and 2,6-DIBQ in drinking water were in the ranges of 0.7-1.3, 1.8-8.0, and 0.4-15.9 ng/L, respectively. Compared with 2,6-dibromo-1,4-benzoquinone, the iodinated halobenzoquinones were generally more cytotoxic. The formation of 2,6-DIBQ during chloramination was significantly affected by the iodide concentration, pH, and natural organic matter. The five tested iodinated halobenzoquinones decomposed during chloramination following pseudo-first-order decay, with the decomposition rate constants in the rank order of 2,6-CIBQ > 2,6-BIBQ > 2,6-DIBQ > 2,3-diiodo-1,4-benzoquinone >2-iodo-1,4-benzoquinone. Nine polar halogenated intermediates as well as ten aliphatic halogenated DBPs were detected as the decomposition products of 2,6-DIBQ during chloramination, based on which the decomposition pathways of 2,6-DIBQ during chloramination were proposed and verified.

Overview of the Phototransformation of Wastewater Effluents by High-Resolution Mass Spectrometry

Photochemical transformation driven by sunlight is one of the most important natural processes for organic contaminant attenuation. In the current study, statistical analysis-assisted high-resolution mass spectrometry was employed to investigate the phototransformation of nontarget features in wastewater effluents under various radical quenching/enhancing conditions. A total of 9694 nontarget features were extracted from the effluents, including photoresistant features, photolabile features, and transformation products. 65% of the wastewater effluent features were photoresistant, and the photolabile features could be classified into five groups: direct photolysis group (group I), HO^•-originated species-dominated group (group II), ³OM*-dominated group (group III), photochemically produced reactive intermediates combination-dominated group (group IV), and non-first-order degradation group (group V). The direct photolyzed features were observed to degrade significantly faster than the indirect photolyzed features. Moreover, group II dominated by HO^•-originated species contributed 34% to the photolabile features. The reaction types that occurred in the phototransformation process were analyzed by linkage analysis. The results suggested that oxygen addition and dealkyl group reactions were the most common reaction types identified in the phototransformation process. Overall, high-resolution mass spectrometry coupled with statistical analysis was applied here to understand the photochemical behavior of the unknown features in wastewater effluents.

Determination of N-Nitrosamines by Gas Chromatography Coupled to Quadrupole–Time-of-Flight Mass Spectrometry in Water Samples

An analytical method based on high-resolution quadrupole–time-of-flight (QToF) mass spectrometry has been developed as an alternative to the classical method, using a low-resolution ion trap (IT) analyzer to reduce interferences in N-nitrosamines determination. Extraction of the targeted compounds was performed by solid-phase extraction (SPE) following the United States Environmental Protection Agency (USEPA) -521 method. First, both electron impact (EI) and positive chemical ionization (PCI) using methane as ionization gas were compared, along with IT and QToF detection. Then, parameters such as limits of detection (LOD) and quantification (LOQ), linearity, and repeatability were assessed. The results showed that the QToF mass analyzer combined with PCI was the best system for the determination of the N-nitrosamines, with instrumental LOD and LOQ in the ranges of 0.2–4 and 0.6–11 ng mL−1, respectively, which translated into method LOD and LOQ in the ranges of 0.2–1.3 and 0.6–3.9 ng L−1, respectively. The analysis of real samples showed the presence of 6 of the N-nitrosamines in influent, effluent, and tap water. N-nitrosodimethylamine (NDMA) was quantified in all the analyzed samples at concentrations between 1 and 27 ng L−1. Moreover, four additional nitrosamines were found in tap and wastewater samples.

Magnetic solid phase extraction using Fe3O4@β-cyclodextrin–lipid bilayers as adsorbents followed by GC-QTOF-MS for the analysis of nine pesticides

A rapid method for the analysis of trace organochlorine pesticides in a complex matrix.