Pathways for degradation of plastic polymers floating in the marine environment

Mass concentration and distribution characteristics of microplastics in landfill mineralized refuse using efficient quantitative detection based on Py-GC/MS

Landfilling is the most traditional disposal method of domestic waste. Plastic waste in landfill sites could degrade to microplastics (MPs) and diffuse to the surrounding environment with leachate. However, MPs pollution in landfill mineralized refuse has not been well recognized. In the present research, a detection method for mixed MPs of polyethylene (PE), polypropylene (PP), and polystyrene (PS) based on Py-GC/MS was established and verified. The method is suitable for the rapid quantitative detection of large-batch of complex solid matrix samples, with an average deviation of less than 10%. Based on the method, samples from a landfill site in South China were studied, where PE was found to be the main component. The total concentration of MPs in mineralized refuse was 7.62 kg/t in the old area and 5.49 kg/t in the young area. Further analysis showed that the content of MPs was correlated with that of plastic waste and the landfill age, indicating that a considerable proportion was secondary MPs. The reserves of MPs in landfill sites may have reached an alarming number. In the absence of adequate safeguards, quantities of MPs may spread from the landfill sites, resulting in serious pollution of the surrounding soil and groundwater.

Eco-Corona Formation on Plastics: Adsorption of Dissolved Organic Matter to Pristine and Photochemically Weathered Polymer Surfaces

Plastic fate in freshwater systems is dependent on particle size, morphology, and physicochemical surface properties (e.g., charge, surface roughness, and hydrophobicity). Environmental aging processes, such as photochemical weathering and eco-corona formation due to dissolved organic matter (DOM) adsorption on plastic surfaces, can alter their physicochemical properties, affecting fate and transport. While plastic aging has been studied from a materials science perspective, its specific implications in environmental contexts remain less understood. Although photochemical weathering and eco-corona formation occur simultaneously in the environment, in this work, we systematically assessed the effects of photochemical weathering on the physicochemical properties of polymers (polyethylene, polypropylene, polyethylene terephthalate, and polystyrene) and how this influences the adsorption of DOMs (Suwannee River humic acid, fulvic acid, and natural organic matter) relative to pristine polymers. Pristine polymers initially had different and distinct physicochemical surface properties, but upon aging, they became more similar in terms of surface properties. Photochemical weathering resulted in a decrease in polymer film thickness, an increase in surface roughness, and hydrophilicity. DOM adlayers on the polymer surfaces resulted in more comparable wettability, effectively masking the initial polymer properties. Collectively, this study explores the physiochemical changes polymers undergo in laboratory studies mimicking environmental conditions. Understanding these changes is the initial step to rationalizing and predicting processes and interactions such as heteroaggregation that dictate the fate of plastics in the environment.

Atmospheric Microplastics: Perspectives on Origin, Abundances, Ecological and Health Risks

Microplastic (MP) pollution has aroused a tremendous amount of public and scientific interest worldwide. MPs are found widely ranging from terrestrial to aquatic ecosystems primarily due to the over-exploitation of plastic products and unscientific disposal of plastic waste. There is a large availability of scientific literature on MP pollution in the terrestrial and aquatic ecosystems, especially the marine environments; however, only recently has greater scientific attention been focused on the presence of MPs in the air and its retrospective health implications. Besides, atmospheric transport has been reported to be an important pathway of transport of MPs to the pristine regions of the world. From a health perspective, existing studies suggest that airborne MPs are priority pollutant vectors, that may penetrate deep into the body through inhalation leading to adverse health impacts such as neurotoxicity, cancer, respiratory problems, cytotoxicity, and many more. However, their effects on indoor and outdoor air quality, and on human health are not yet clearly understood due to the lack of enough research studies on that and the non-availability of established scientific protocols for their characterization. This scientific review entails important information concerning the abundance of atmospheric MPs worldwide within the existing literature. A thorough comparison of existing sampling and analytical protocols has been presented. Besides, this review has unveiled the areas of scientific concern especially air quality monitoring which requires immediate attention, with the information gaps to be filled have been addressed.

Current studies on the degradation of microplastics in the terrestrial and aquatic ecosystem

Soil and water are two important basic ecosystems for the survival of different organisms. The excessive microplastic pollutants in soil have been directly discharged into the terrestrial ecosystems. Microplastic pollutants (MPs) constitute a ubiquitous global menace due to their durability, flexibility, and tough nature. MPs posed threat to the sustainability of the ecosystem due to their small size and easy transportation via ecological series resulting in the accumulation of MPs in aquatic and terrestrial ecosystems. After being emitted into the terrestrial ecosystem, the MPs might be aged by oxidative degeneration (photo/thermal), reprecipitation (bioturbation), and hetero-accumulation. The mechanism of adsorption, degradation, and breakdown of MPs into unaffected plastic debris is accomplished by using several biological, physical, and chemical strategies. This review presents the importance of ecosystems, occurrence and sources of MPs, its toxicity, and the alteration in the ecology of the ecosystems. The inhibitory impact of MPs on the ecosystems also documents to unveil the ecological hazards of MPs. Further research is required to study the immobilization and recovery efficiency of MPs on a larger scale.

Macroplastic fragmentation in rivers

The process of macroplastic (>0.5 cm) fragmentation results in the production of smaller plastic particles, which threaten biota and human health and are difficult to remove from the environment. The global coverage and long retention times of macroplastic waste in fluvial systems (ranging from years to centuries) create long-lasting and widespread potential for its fragmentation and the production of secondary micro- and nanoplastics. However, the pathways and rates of this process are mostly unknown and existing experimental data not fully informative, which constitutes a fundamental knowledge gap in our understanding of macroplastic fate in rivers and the transfer of produced microparticles throughout the environment. Here we present a conceptual framework which identifies two types of riverine macroplastic fragmentation controls: intrinsic (resulting from plastic item properties) and extrinsic (resulting from river characteristics and climate). First, based on the existing literature, we identify the intrinsic properties of macroplastic items that make them particularly prone to fragmentation (e.g., film shape, low polymer resistance, previous weathering). Second, we formulate a conceptual model showing how extrinsic controls can modulate the intensity of macroplastic fragmentation in perennial and intermittent rivers. Using this model, we hypothesize that the inundated parts of perennial river channels-as specific zones exposed to the constant transfer of water and sediments-provide particular conditions that accelerate the physical fragmentation of macroplastics resulting from their mechanical interactions with water, sediments, and riverbeds. The unvegetated areas in the non-inundated parts of perennial river channels provide conditions for biochemical fragmentation via photo-oxidation. In intermittent rivers, the whole channel zone is hypothesized to favor both the physical and biochemical fragmentation of macroplastics, with the dominance of the mechanical type during the periods with water flow. Our conceptualization aims to support future experimental and modelling works quantifying plastic footprint of different macroplastic waste in different types of rivers.

Micro- and nanoplastics (MNPs) and their potential toxicological outcomes: State of science, knowledge gaps and research needs

Plastic waste has been produced at a rapidly growing rate over the past several decades. The environmental impacts of plastic waste on marine and terrestrial ecosystems have been recognized for years. Recently, researchers found that micro- and nanoplastics (MNPs), micron (100 nm - 5 mm) and nanometer (1 - 100 nm) scale particles and fibers produced by degradation and fragmentation of plastic waste in the environment, have become an important emerging environmental and food chain contaminant with uncertain consequences for human health. This review provides a comprehensive summary of recent findings from studies of potential toxicity and adverse health impacts of MNPs in terrestrial mammals, including studies in both in vitro cellular and in vivo mammalian models. Also reviewed here are recently released biomonitoring studies that have characterized the bioaccumulation, biodistribution, and excretion of MNPs in humans. The majority MNPs in the environment to which humans are most likely to be exposed, are of irregular shapes, varied sizes, and mixed compositions, and are defined as secondary MNPs. However, the MNPs used in most toxicity studies to date were commercially available primary MNPs of polystyrene (PS), polyethylene (PE), polyvinyl chloride (PVC), polyethylene terephthalate (PET), and other polymers. The emerging in vitro and in vivo evidence reviewed here suggests that MNP toxicity and bioactivity are largely determined by MNP particle physico-chemical characteristics, including size, shape, polymer type, and surface properties. For human exposure, MNPs have been identified in human blood, urine, feces, and placenta, which pose potential health risks. The evidence to date suggests that the mechanisms underlying MNP toxicity at the cellular level are primarily driven by oxidative stress. Nonetheless, large knowledge gaps in our understanding of MNP toxicity and the potential health impacts of MNP exposures still exist and much further study is needed to bridge those gaps. This includes human population exposure studies to determine the environmentally relevant MNP polymers and exposure concentrations and durations for toxicity studies, as well as toxicity studies employing environmentally relevant MNPs, with surface chemistries and other physico-chemical properties consistent with MNP particles in the environment. It is especially important to obtain comprehensive toxicological data for these MNPs to understand the range and extent of potential adverse impacts of microplastic pollutants on humans and other organisms.

Fate of microplastics under the influence of climate change

Plastic pollution and climate change are two major environmental focuses. Having the forming potential due to ambient plastic pollution, the environmental fate of microplastics shall be inevitably impacted by global warming. This manuscript discusses the destiny of environmental microplastics and characterizes their fate considering the framework of the planetary boundary. The major routes for microplastic discharge include the release of microplastic stored in the ice into the sea when the ice melts as a result of global temperature increase, flushing of the plastic/microplastic debris from the shorelines into the adjacent water bodies as a result of increased rainfall, redistribution of the microplastics away from the source of plastic debris as a result of increased wind, and accumulation of microplastics in the soil as a result of drought. A perspective on the impact of climate change and microplastic pollution on aquatic and soil organisms was discussed as well.

Online study of the plasma-accelerated aging process and toxicity of polyethylene terephthalate

Plastic aging occurs in all environmental media and affects their environmental behavior and toxicity. In this study, non-thermal plasma was applied to simulate the aging process of plastics, with polyethylene terephthalate (PET-film) being used as a model. The surface morphology, mass defects, toxicity of aged PET-film and the generation of airborne fine particles were comprehensively characterized. The surface of PET films began to become rough and then gradually became uneven, generating pores, protrusions and cracks. The toxicity of aged PET films was assessed in Caenorhabditis elegans which significantly reduced head thrashing, body bending and brood size. A single particle aerosol mass spectrometry instrument was used to characterize the size distribution and chemical composition of airborne fine particles in real-time. Few particles were observed during the first 90 min, while the generation of particles accelerated significantly after aging time beyond 90 min. For two pieces of PET film with surface area of 5 cm2, during the 180 min, at least 15113 ± 153 fine particles were generated, having a unimodal size distribution with a peak of 0.4 µm. The main components of these particles included metals, inorganic non-metals, and organic components. The results provide useful information on plastic aging and are beneficial in assessing the potential environmental risks.

Differences in microplastic degradation in the atmosphere and coastal water environment from two island nations: Japan and New Zealand

Microplastics are subject to environmental forces that can change polymer organization on a molecular scale. However, it is not clear to what extent these changes occur in the environment and whether microplastics in the atmospheric and water environment differ. Here we identify structural differences between microplastics in the atmosphere and water environment from Japan and New Zealand, representing two archipelagos differing in their proximity to nearby countries and highly populated areas. We first highlight the propensity for smaller microplastics to arrive via air masses from the Asian continent to the Japan Sea coastal area, while New Zealand received larger, locally derived microplastics. Analyses of polyethylene in the Japanese atmosphere indicate that microplastics transported to the Japanese coastal areas were more crystalline than polyethylene particles in the water, suggesting that the plastics arriving by air were relatively more aged and brittle. By contrast, polypropylene particles in New Zealand waters were more degraded than the microplastic particles in the air. Due to the lack of abundance, both polyethylene and polypropylene could not be analyzed for both countries. Nevertheless, these findings show the structural variation in microplastics between environments in markedly different real-world locations, with implications for the toxic potential of these particles.

A Hidden Pathway for Human Exposure to Micro- and Nanoplastics-The Mechanical Fragmentation of Plastic Products during Daily Use

In numerous environmental compartments around the world, the existence of micro- and nanoplastics (MNPs) in the environment has been verified. A growing number of studies have looked at the interaction between MNPs and human activities due to the risks they may pose to humans. Exposure pathways are key factors in measuring MNPs risks. However, current research largely ignores the contribution of mechanical fragmentation pathways to MNPs exposure during the daily use of plastic products. Our critical review demonstrated the research gap between MNP fragmentation and risk assessments via a network analysis. The release of fragmented MNPs and their properties were also described at various scales, with emphasis on environmental stressors and mechanical fragmentation. In the scenarios of daily use, plastic products such as food packaging and clothing provide acute pathways of MNPs exposure. The release tendency of those products (up to 102 mg MNPs) are several orders of magnitude higher than MNPs abundances in natural compartments. Despite the limited evidence available, waste recycling, landfill and municipal activities represented long-term pathways for MNPs fragmentation and point sources of MNPs pollution in environmental media. Assessing the health effects of the fragmentation process, unfortunately, is further hampered by the current absence of human exposure impact assessments for secondary MNPs. We proposed that future studies should integrate aging evaluation into risk assessment frameworks and establish early warning signs of MNPs released from plastic products.

Colloidal Interactions of Microplastic Particles with Anionic Clays in Electrolyte Solutions

Homoaggregation of polystyrene microplastics (MPs) and heteroaggregation of MPs with anionic clay minerals, namely, layered double hydroxide (LDH), in different salt (NaCl, CaCl2, and Na2SO4) solutions were systematically investigated using light scattering techniques. The salt type and ionic strength had significant effects on the stability of both MPs and LDH particles individually and the results could be explained by DLVO theory and the Schulze-Hardy rule. However, once stable colloidal dispersions of the individual particles were mixed, heteroaggregation occurred between the oppositely charged MPs and LDH, which was also confirmed by transmission electron microscopy and X-ray scattering. Adsorption of the LDH particles resulted in neutralization and reversal of MPs surface charge at appropriate LDH doses. Once LDH adsorption neutralized the negative charges of the MP spheres, rapid aggregation was observed in the dispersions, whereas stable samples formed at high and low LDH concentrations. The governing interparticle interactions included repulsive electrical double-layer forces, as well as van der Waals and patch-charge attractions, the strength of which depended on the mass ratio of the interacting particles and the composition of the aqueous solvent. Our results shed light on the colloidal behavior of MPs in a complex aquatic environment and, in the long term, are also useful for developing LDH-based approaches for water remediation to remove contamination with MP particles.

Porous Thermoformed Protein Bioblends as Degradable Absorbent Alternatives in Sanitary Materials

Protein-based porous absorbent structures can be processed and assembled into configurations suitable for single-use, biodegradable sanitary materials. In this work, a formulation based on a mixture of proteins available as industrial coproducts is processed into continuous porous structures using extrusion and assembled using conventional thermal methods. The experimental design led to formulations solely based on zein-gluten protein bioblends that could be manufactured as liquid absorbent pellets, compressed pads, and/or porous films. The processing versatility is attributed to the synergistic effect of zein as a low viscosity thermoformable protein with gluten as a readily cross-linkable high molecular weight protein. The capillary-driven sorption, the biodegradability of the materials, and the possibility to assemble the products as multilayer components provide excellent performance indicators for their use as microplastic-free absorbents. This work shows the potential of biopolymers for manufacturing sustainable alternatives to current nonbiodegradable and highly polluting disposable items such as pads and diapers.

Exploring microplastic contamination in Guiana dolphins (Sotalia guianensis): Insights into plastic pollution in the southwestern tropical Atlantic

Marine mammals are considered sentinel species and may act as indicators of ocean health. Plastic residues are widely distributed in the oceans and are recognised as hazardous contaminants, and once ingested can cause several adverse effects on wildlife. This study aimed to identify and characterise plastic ingestion in the Guiana dolphins (Sotalia guianensis) from the Southwestern Tropical Atlantic by evaluating the stomach contents of stranded individuals through KOH digestion and identification of subsample of particles by LDIR Chemical Imaging System. Most of the individuals were contaminated, and the most common polymers identified were PU, PET and EVA. Microplastics were more prevalent than larger plastic particles (meso- and macroplastics). Smaller particles were detected during the rainy seasons. Moreover, there was a positive correlation between the stomach content mass and the number of microplastics, suggesting contamination through trophic transfer.

The impact of microplastics on bivalve mollusks: A bibliometric and scientific review

Bivalves are important members of the ecosystem and their populations are declining globally, making them a concern for their role in ecosystem services and the fishing industry. Bivalves are excellent bioindicators of MPs pollution due to their widespread distribution, filtering capabilities, and close association with human health. Microplastics (MPs) have direct and indirect impacts on bivalves, affecting their physiology, habitat structure, food sources, and persistence of organic pollutants. This review provides an extensive overview of the impact of MPs on bivalves, covering various aspects such as their economic significance, ecological roles, and importance in biomonitoring environmental quality. The article presents the current state of knowledge on the sources and pathways of MPs in aquatic environments and their effects on bivalves. The mechanisms underlying the effects of MPs on bivalves, including ingestion, filtration activity, feeding inhibition, accumulation, bioaccumulation, and reproduction, are also discussed. Additionally, a bibliometric analysis of research on MPs in bivalves is presented, highlighting the number of papers, geographical distribution, and keyword clusters relating to MPs. Finally, the review emphasizes the importance of ongoing research and the development of mitigation strategies to reduce the negative effects of MPs pollution on bivalves and their habitats in oceans and coastal waters.

Enhancement of photodegradation of polyethylene with adsorbed polycyclic aromatic hydrocarbons under artificial sunlight irradiation

The photodegradation of plastic waste produces microplastics (MPs) in marine environments. Plastics can adsorb hydrophobic organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) and can be transported over long distances. However, the impact of adsorbed pollutants on the photodegradation remains unknown. Here, we show that adsorbed PAHs act as photocatalysts that promote the photodegradation of polyethylene. Upon light irradiation, coloration and surface degradation of the PAH-adsorbed polyethylene sheets were observed, indicating that the PAH-adsorbed polyethylene sheets are less resistant to light. Furthermore, fluorene, phenanthrene, anthracene, benzo[a]anthracene, benzo[a]pyrene, and indeno[1,2,3-cd]perylene adsorbed on polyethylene MP exhibited lower photodegradation rates than the aqueous phase. These results indicate that these PAHs can act as photocatalysts; their role of PAHs may have two adverse effects on marine environment. First, enhanced photodegradation of plastic waste increased the production of MPs. Second, the lifetime of PAHs is extended, thereby enhancing PAHs pollution in marine environments.

Microplastics: Human exposure assessment through air, water, and food

BACKGROUND

Microplastics (MP) are plastic particles with dimension up to 5 mm. Due to their persistence, global spread across different ecosystems and potential human health effects, they have gained increasing attention during the last decade. However, the extent of human exposure to MP through different pathways and their intake have not been elucidated.

OBJECTIVES

The objective of this review is to provide an overview on the pathways of exposure to MP through inhalation, ingestion, and dermal contact considering data from the open bibliography on MP in air, dust, food, water and drinks.

METHODS

A bibliographic search on Scopus and PubMed was conducted using keywords on MP in outdoor and indoor air, indoor dust, food including beverages and water and human intake (n = 521). Articles were sorted by their title and abstract (n = 213), and only studies reporting MP identification and quantification techniques were further considered (n = 168). A total of 115 articles that include quality assurance and quality control (QA/QC) procedures are finally discussed in the present review. Based on MP concentration data available in literature, we estimated the potential inhaled dose (ID), dust intake (DI), the estimated daily intake (EDI) via food and beverages. Finally, the total daily intake (TDI) considering both inhalation and ingestion routes are provided for adults, infants and newborns.

RESULTS

The concentrations of MP in outdoor and indoor air, dust, and in food and water are provided according to the bibliography. Human exposure to MP through dust ingestion, inhalation of air and food/drinks consumption revealed that indoor air and drinking waters were the main sources of MP.

CONCLUSIONS

This study reveals that humans are constantly exposed to MP, and that the indoor environment and the food and water we ingest decisively contribute to MP intake. Additionally, we highlight that infants and newborns are exposed to high MP concentrations and further studies are needed to evaluate the presence and risk of MP in this vulnerable age-population.

Sources, Degradation, Ingestion and Effects of Microplastics on Humans: A Review

Celluloid, the predecessor to plastic, was synthesized in 1869, and due to technological advancements, plastic products appear to be ubiquitous in daily life. The massive production, rampant usage, and inadequate disposal of plastic products have led to severe environmental pollution. Consequently, reducing the employment of plastic has emerged as a pressing concern for governments globally. This review explores microplastics, including their origins, absorption, and harmful effects on the environment and humans. Several methods exist for breaking down plastics, including thermal, mechanical, light, catalytic, and biological processes. Despite these methods, microplastics (MPs, between 1 and 5 mm in size) continue to be produced during degradation. Acknowledging the significant threat that MPs pose to the environment and human health is imperative. This form of pollution is pervasive in the air and food and infiltrates our bodies through ingestion, inhalation, or skin contact. It is essential to assess the potential hazards that MPs can introduce. There is evidence suggesting that MPs may have negative impacts on different areas of human health. These include the respiratory, gastrointestinal, immune, nervous, and reproductive systems, the liver and organs, the skin, and even the placenta and placental barrier. It is encouraging to see that most of the countries have taken steps to regulate plastic particles. These measures aim to reduce plastic usage, which is essential today. At the same time, this review summarizes the degradation mechanism of plastics, their impact on human health, and plastic reduction policies worldwide. It provides valuable information for future research on MPs and regulatory development.

Shapes of Hyperspectral Imaged Microplastics

Shape matters for microplastics, but its definition, particularly for hyperspectral imaged microplastics, remains ambiguous and inexplicit, leading to incomparability across data. Hyperspectral imaging is a common approach for quantification, yet no unambiguous microplastic shape classification exists. We conducted an expert-based survey and proposed a set of clear and concise shapes (fiber, rod, ellipse, oval, sphere, quadrilateral, triangle, free-form, and unidentifiable). The categories were validated on images of 11,042 microplastics from four environmental compartments (seven matrices: indoor air; wastewater influent, effluent, and sludge; marine water; stormwater; and stormwater pond sediments), by inviting five experts to score each shape. We found that the proposed shapes were well defined, representative, and distinguishable to the human eye, especially for fiber and sphere. Ellipse, oval, and rod were though less distinguishable but dominated in all water and solid matrices. Indoor air held more unidentifiable, an abstract shape that appeared mostly for particles below 30 μm. This study highlights the need for assessing the recognizability of chosen shape categories prior to reporting data. Shapes with a clear and stringent definition would increase comparability and reproducibility across data and promote harmonization in microplastic research.

Plastic bottles for chilled carbonated beverages as a source of microplastics and nanoplastics

Carbonated beverages are characterized by low temperatures, multiple microbubbles, high pressure, and an acidic environment, creating ideal conditions for releasing contaminants from plastic bottles. However, the release patterns of microplastics (MPs) and nanoplastics (NPs) are poorly understood. We investigated the effects of plastic type, CO2 filling volume, temperature, sugar content, and additive on the leakage of MPs/NPs and heavy metals. Our results showed that polypropylene bottles released greater MPs (234±9.66 particles/L) and NPs (9.21±0.73 × 107 particles/L) than polyethylene and polyethylene terephthalate bottles. However, subjecting the plastic bottles to 3 repeated inflation treatments resulted in 91.65-93.18% removal of MPs/NPs. The release of MPs/NPs increased with increasing CO2 filling volume, driven by the synergistic effect of CO2 bubbles and pressure. After 4 freeze-thaw cycles, the release of MPs and NPs significantly increased, reaching 450±38.65 MPs and 2.91±0.10 × 108 NPs per liter, respectively. The presence of sugar leads to an elevation in MPs release compared to sucrose-free carbonated water, while the addition of additives to carbonated water exhibits negligible effects on MPs release. Interestingly, actual carbonated beverages demonstrated higher MPs concentrations (260.52±27.18-281.38±61.33 particles/L) than those observed in our well-controlled experimental setup. Our study highlights the non-negligible risk of MPs/NPs in carbonated beverages at low temperatures and suggests strategies to mitigate human ingestion of MPs/NPs, such as selecting appropriate plastic materials, high-pressure carbonated water pretreatment, and minimizing freeze-thaw cycles. Our findings provide insights for further study of the release patterns of the contaminants in natural environments with bubbles, pressure, low temperature, and freeze-thaw conditions.

Recent advances on microplastics pollution and removal from wastewater systems: A critical review

Microplastics (MPs) (plastic particles <5 mm) are globally acknowledged as a serious emerging micropollutant, which passes through various pathways in natural habitats and eventually ends up in our food chain. In this context, the present study critically reviews recent advances in MPs sampling and detection, occurrence, fate, and removal in wastewater treatment plants (WWTPs) by delineating their characteristics that manifest toxicity in the environment via effluent discharge. While there is currently no standard protocol in place, this work examined and compared the latest approaches adopted for improved sampling, sample processing, and characterization of MPs via fluorescence imaging and certified reference materials for method validation. MPs concentration from different sources in the WWTPs varies considerably ranging between 0.28 and 18285 MPs/L (raw wastewater), 0.004-750 MPs/L (effluent), and 0.00023-10380 MPs/kg (sludge). Assessment of MPs removal efficiency across different treatment stages in various in WWTPs has been performed and elucidated their removal mechanisms. The overall MPs removal efficiency in primary, secondary, and tertiary treatment stages in WWTPs reported to be around 57-99%, 78.1-99.4%, and 90-99.2%, respectively. Moreover, the review covers advanced treatment methods for removing MPs, including membrane bioreactors, coagulation/flocculation, ultrafiltration, rapid sand filtration, ozonation, disc filtration, and reverse osmosis, which have been found to be highly effective (>99%). Membrane bioreactors have been proclaimed to be the most reliable secondary treatment technique for MPs removal. Coagulation (92.2-95.7%) followed by ozonation (99.2%) as a tertiary treatment chain has been demonstrated to be the most efficient in removing MPs from secondary-treated wastewater effluent. Further, the review delineates the effect of different treatment stages on the physical and chemical characteristics of MPs, associated toxicity, and potential impact factors that can influence the MPs removal efficiency in WWTPs. Conclusively, the merits and demerits of advanced treatment techniques to mitigate MPs pollution from the wastewater system, research gaps, and future perspectives have been highlighted.

A review of methods for modeling microplastic transport in the marine environments

Microplastic (MP) pollution is ubiquitous in the oceans and poses serious threats to the marine ecosystems. Nowadays numerical modeling has become one of the widely used tools for monitoring and predicting the transport and fate of MP in marine environments. Despite the growing body of research on numerical modeling of marine MP, the advantages and disadvantages of various modeling methods have not received systematic evaluation in published works. Important aspects such as parameterization schemes for MP behaviors, factors influencing MP transport, and proper configuration in beaching are essential for guiding researchers to choose proper methods in their work. For this purpose, we comprehensively reviewed the current knowledge on factors influencing MP transport, classified modeling approaches according to the governing equations, and summarized up-to-date parameterization schemes for MP behaviors. Critical factors such as vertical velocity, biofouling, degradation, fragmentation, beaching, and washing-off were reviewed in the frame of MP transport processes.

Distribution of microplastics in upstream and downstream surface waters of the Iranian rivers discharging to the southern Caspian Sea

Microplastic pollution in the riverine ecosystems has caught many attentions in the scientific literatures. However, little information is available about the abundance and distribution of microplastics of the rivers discharging to the Caspian Sea. The aim of this study was to assess the spatial and seasonal distribution of microplastics in the surface waters of thirteen rivers discharging to the southern Caspian Sea. Microplastics were found in all stations with uneven distributions. The average concentrations of microplastics in the stations during snowmelt and dry seasons were 1.406 ± 0.1380 microplastics/m3 and 0.4070 ± 0.01500 microplastics/m3, respectively. Positive gradients of the rivers microplastics concentration from upstream to downstream were found. White/transparent polyethylene (PE) particles with the shape of fragment/film and the length (L) of ≤ 1 mm were the most common microplastics in the surface waters of the rivers discharging to the southern Caspian Sea. Also, the mean concentration of microplastics in spring snowmelt and runoff period was 3.45 times higher than in dry period. Factors such as sewage and household wastes; landfills; and recreational-tourism, fishing and agricultural activities along the rivers may contribute to microplastic contamination in downstream stations. Our data provide baseline information of microplastics in surface waters of rivers discharging to the southern Caspian Sea.

Prevalence of microplastics in commonly consumed fish species of the river Old Brahmaputra, Bangladesh

Microplastics (MPs) are pervasive in aquatic environments, but inland waterbodies (rivers and floodplains) have received much less attention. The present study assesses the incidence of MPs in the gastrointestinal tracts of five commercially important edible fish species-two column feeders (n = 30) and three benthivores (n = 45) from upstream, midstream, and downstream of the Old Brahmaputra river in north-central Bangladesh. MPs were detected in 58.93% of fish, with the highest level in freshwater eel, Mastacembelus armatus (10.31 ± 0.75/fish). Fibers (49.03%) and pellets (28.02%) were the most frequent MPs. Nearly 72% MPs were smaller than 1 mm, and 50.97% were black. FTIR analysis showed 59% polyethelene (PE), followed by polyamide (40%) and unidentified (1%). MP ingestion was linked to fish size and weight, and a high incidence was recorded in the downstream river. Two omnivorous benthic fish ingest more MPs than others. The results corroborate the presence of MPs in the inland river and fish fauna and augment our understanding of heterogeneous MP uptake by fish.

Aging behavior of microplastics accelerated by mechanical fragmentation: alteration of intrinsic and extrinsic properties

Microplastics (MPs) inevitably undergo multiple aging processes during their life cycle in the environment. However, the information regarding the mechanical fragmentation behavior of MPs remained unclear, including the changes in the intrinsic properties of aged MPs, the measurement of aging degree, the underlying mechanism, and the interaction with heavy metals. Here, MPs (PS, PP, PET) were aged by crushing (-CR) and ball-milling (-BM) to simulate mild and severe mechanical fragmentation, respectively. Our results indicated that mechanical fragmentation significantly affected the morphology of MPs. The aging degree of MP-BM was deeper compared to MP-CR owing to smaller particle size, larger specific surface area, poorer heat resistance, better hydrophilicity, and richer oxygen-containing functional groups. The carbonyl index (CI) and O/C ratio were used to measure the aging degree of the two mechanical aging treatments. Besides, the mechanism was proposed and the discrepancy between the two treatments was elaborated from three aspects including the excitation energy source, reaction interface, and reaction dynamics. Furthermore, the extrinsic properties of MPs altered with the increase of aging degree; specifically, the adsorption capacities of heavy metals were enhanced. Meanwhile, it was unveiled that the CI value and O/C ratio played a vital role in estimating the adsorption ability of heavy metals. The findings not only reveal the mechanical fragmentation behavior of MPs but also provide new insights into the assessment of the potential risks of the aged MPs via chemical indexes.

Wood decay fungi show enhanced biodeterioration of low-density polyethylene in the absence of wood in culture media

The involvement of microorganisms in low-density polyethylene (LDPE) degradation is widely studied across the globe. Even though soil, landfills, and garbage dumps are reported to be promising niches for such organisms, recently the involvement of wood decay fungi in polyethylene degradation is highlighted. In light of this, 50 fungal samples isolated from decaying hardwoods were assessed for their wood degradation ability and for their depolymerization enzymatic activities. For the LDPE deterioration assay, 22 fungal isolates having wood decay ability and de-polymerization enzymatic activities were selected. Fungal cultures with LDPE sheets (2 cm x 10 cm x 37.5 μm) were incubated in the presence and in the absence of wood as the carbon source (C) for 45 days. Degradation was measured by weight loss, changes in tensile properties, reduction in contact angle, changes of functional groups in Fourier-transform infrared spectroscopy, Scanning electron microscopic imaging, and CO2 evolution by strum test. Among the isolates incubated in the absence of wood, Phlebiopsis flavidoalba out-performed the other fungal species showing the highest percentage of weight reduction (23.68 ± 0.34%), and the lowest contact angle (64.28° ± 5.01). Biodegradation of LDPE by P. flavidoalba was further supported by 46.79 ± 0.67% of the mass loss, and 3.07 ± 0.13% of CO2 emission (mg/L) in the strum test. The most striking feature of the experiment was that all the isolates showed elevated degradation of LDPE in the absence of wood than that in the presence of wood. It is clear that in the absence of a preferred C source, wood decay fungi thrive to utilize any available C source (LDPE in this case) showing the metabolic adaptability of fungi to survive under stressful conditions. A potential mechanism for LDPE degradation is also proposed.

Effect of Aging on Physicochemical Properties and Size Distribution of PET Microplastic: Influence on Adsorption of Diclofenac and Toxicity Assessment

Microplastics (MPs) are detected in the water, sediments, as well as biota, mainly as a consequence of the degradation of plastic products/waste under environmental conditions. Due to their potentially harmful effects on ecosystems and organisms, MPs are regarded as emerging pollutants. The highly problematic aspect of MPs is their interaction with organic and inorganic pollutants; MPs can act as vectors for their further transport in the environment. The objective of this study was to investigate the effects of ageing on the changes in physicochemical properties and size distribution of polyethylene terephthalate (PET), as well as to investigate the adsorption capacity of pristine and aged PET MPs, using pharmaceutical diclofenac (DCF) as a model organic pollutant. An ecotoxicity assessment of such samples was performed. Characterization of the PET samples (bottles and films) was carried out to detect the thermooxidative aging effects. The influence of the temperature and MP dosage on the extent of adsorption of DCF was elucidated by employing an empirical modeling approach using the response surface methodology (RSM). Aquatic toxicity was investigated by examining the green microalgae Pseudokirchneriella subcapitata. It was found that the thermooxidative ageing process resulted in mild surface changes in PET MPs, which were reflected in changes in hydrophobicity, the amount of amorphous phase, and the particle size distribution. The fractions of the particle size distribution in the range 100-500 μm for aged PET are higher due to the increase in amorphous phase. The proposed mechanisms of interactions between DCF and PET MPs are hydrophobic and π-π interactions as well as hydrogen bonding. RSM revealed that the adsorption favors low temperatures and low dosages of MP. The combination of MPs and DCF exhibited higher toxicity than the individual components.

The impact of amine and carboxyl functionalised microplastics on the physiology of daphnids

Plastic waste is considered a major threat for terrestrial, marine and freshwater ecosystems. Ingestion of primary or secondary microparticles resulting from plastic degradation can lead to their trophic transfer raising serious health concerns. In this study, the effect of amine and carboxy functionalized polystyrene microparticles on the physiology of daphnids was investigated with a combination of phenotypic and metabolic endpoints. Carboxy functionalized microparticles showed higher toxicity in acute exposures compared to their amine counterparts. Accumulation of both microparticles in animal gut was confirmed by stereo-microscopy as well as fluorescent microscopy which showed no presence of particles in the rest of the animal. Fluorescence based quantification of microparticles extracted from animal lysates validated their concentration-dependent uptake. Additionally, exposure of daphnids to amine and carboxy functionalized microparticles resulted in increased activities of key enzymes related to metabolism and detoxification. Finally, significant metabolic perturbations were discovered following exposure to microplastics. These findings suggest that polystyrene microparticles can hinder organism performance of the freshwater species and highlight the importance of seeking for holistic and physiological endpoints for pollution assessment.

The influence of various microplastics on PBDEs contaminated soil remediation by nZVI and sulfide-nZVI: Impedance, electron-accepting/-donating capacity and aging

The microplastics (MPs) existed in the environment widely has resulted in novel thinking about in-situ remediation techniques, such as nano-zero-valent iron (nZVI) and sulfided nZVI (S-nZVI), which were often compromised by various environmental factors. In this study, three common MPs such as polyvinyl chloride (PVC), polystyrene (PS), and polypropylene (PP) in soil were found to inhibit the degradation rate of decabromodiphenyl ether (BDE209) by nZVI and S-nZVI to different degrees due to MPs inhibiting of electron transfer which is the main way to degrade BDE209. The inhibition strength was related to its impedance (Z) and electron-accepting (EAC)/-donating capacity (EDC). Based on the explanation of the inhibition mechanism, the reason for different aging degrees of nZVI and S-nZVI in different MPs was illustrated, especially in PVC systems. Furthermore, the aging of reacted MPs, functionalization and fragmentation in particular, indicated that they were involved in the degradation process. Moreover, this work provided new insights into the field application of nZVI-based materials for removing persistent organic pollutants (POPs).

Mini review of microplastic pollutions and its impact on the environment and human health

In recent years, the environmental pollution of microplastics (MPs) has increasingly drawn our attention. MPs are small fragments of plastics that are commonly dispersed in the environment. The accumulation of environmental MPs is due to population growth and urbanization, while natural disasters such as hurricanes, flooding and human activity may influence their distribution. The leaching of chemicals from MPs raises a significant safety problem and environmental approaches aimed at reducing the use and recycling of plastics, with the replacement by bioplastics and wastewater treatment developments are called for. This summary also helps in demonstrating the connection between terrestrial and freshwater MPs and wastewater treatment plants as the major contributors to environmental MPs by discharges of sludge and effluent. More research on the classification, detection, characterization and toxicity of MPs are essential to enable greater options and solutions. Control initiatives need to intensify the comprehensive study of MP waste control and management information programmes in the fields of institutional engagement, technological research and development, legislation and regulation. A comprehensive quantitative analysis approach for MPs should be created in the future, and more reliable traceability analysis methods should be built to examine further its environmental activity and existence, where this should be done to improve scientific research on MP pollution in terrestrial, freshwater and marine environments and hence, develop more scientific and rational control policies.

Biodegradable Zein-Based Biocomposite Films for Underwater Delivery of Curcumin Reduce Thermal Stress Effects in Corals

Massive coral bleaching episodes induced by thermal stress are one of the first causes of coral death worldwide. Overproduction of reactive oxygen species (ROS) has been identified as one of the potential causes of symbiosis breakdown between polyps and algae in corals during extreme heat wave events. Here, we propose a new strategy for mitigating heat effects by delivering underwater an antioxidant to the corals. We fabricated zein/polyvinylpyrrolidone (PVP)-based biocomposite films laden with the strong and natural antioxidant curcumin as an advanced coral bleaching remediation tool. Biocomposites' mechanical, water contact angle (WCA), swelling, and release properties can be tuned thanks to different supramolecular rearrangements that occur by varying the zein/PVP weight ratio. Following immersion in seawater, the biocomposites became soft hydrogels that did not affect the coral's health in the short (24 h) and long periods (15 days). Laboratory bleaching experiments at 29 and 33 °C showed that coral colonies of Stylophora pistillata coated with the biocomposites had ameliorated conditions in terms of morphological aspects, chlorophyll content, and enzymatic activity compared to untreated colonies and did not bleach. Finally, biochemical oxygen demand (BOD) confirmed the full biodegradability of the biocomposites, showing a low potential environmental impact in the case of open-field application. These insights may pave the way for new frontiers in mitigating extreme coral bleaching events by combining natural antioxidants and biocomposites.

Micro- and nanoplastic toxicity: A review on size, type, source, and test-organism implications

Polymeric wastes are among the current major environmental problems due to potential pollution and contamination. Within the spectrum of polymeric waste, microplastics (MPs) and nanoplastics (NPs) have gained ground in recent research since these particles can affect the local biota, inducing toxic effects on several organisms. Different outcomes have been reported depending on particle sizes, shape, types, and exposed organisms and conditions, among other variables. This review aimed to compile and discuss the current knowledge and possible literature gaps regarding the MPs and NPs generation and their toxicological effects as stressors, considering polymer type (as polyethylene, polypropylene, polyethylene terephthalate, polystyrene, polyvinyl chloride, or others), size (micro- or nano-scale), source (commercial, lab-synthesized, or environmental) and test organism group. In that sense, 615 publications were analyzed, among which 72 % discussed micro-sized plastics, while <28 % assayed the toxicity of NPs (<1 μm). For most polymers, MPs and NPs were commercially purchased and used without additional size reduction processes; except for polyethylene terephthalate studies that mostly used grinding and cutting methods to obtain MPs. Polystyrene (PS) was the main polymer studied, as both MPs and NPs. PS accounts for >90 % of NPs reports evaluated, reflecting a major literature gap if compared to its 35.3 % share on MPs studies. Among the main organisms, arthropods and fish combined accounted for nearly 40 % of toxicity testing. Overall, the different types of plastics showed a tendency to report toxic effects, except for the 'Survival/lethality' category, which might indicate that polymeric particles induce mostly sublethal toxic effects. Furthermore, despite differences in publication numbers, we observed greater toxicity reported for NPs than MPs with oxidative stress among the majorly investigated endpoints. This study allowed a hazard profile overview of micro/nanoplastics (MNPs) and the visualization of literature gaps, under a broad diversity of toxicological evidence.

Quantification of Polymer Surface Degradation Using Fluorescence Spectroscopy

One solution to minimizing plastic pollution is to improve reuse and recycling strategies. Recycling, however, is limited by the overall degradation of plastics being used, and current techniques for monitoring this plastic degradation fail to observe this in its early stages, which is key for optimizing reusability. This research seeks to develop an inexpensive, reproducible, and nondestructive technique for monitoring degradation of polyethylene (PE) and polypropylene (PP) materials using Nile red as a fluorescent probe. Changes in Nile red's fluorescence spectra were observed upon exposure to stained, aged PE and PP samples. As the surface hydrophobicity of the plastic decreases, Nile red's fluorescence signal undergoes a corresponding signal shift to longer wavelengths (lower energy). The trends seen in the fluorescent profile were related to more commonly used measurements of plastic degradation, namely, the carbonyl index from infrared spectroscopy and bulk crystallinity from calorimetry. Results demonstrate clear trends in fluorescence spectra shifts as related to the chemical and physical changes to the plastics, with trends dependent on the polymer type but independent of polymer film thickness. The strength of this technique is divided into two defined fits of the fluorescence signal; one fit characterizes the degradation throughout the whole range of degradative oxidation and the other is tailored to provide insight into the early stages of degradation. Overall, this work establishes a characterization tool that assesses the extent of plastics' degradation, which may ultimately impact our ability to recover plastics and minimize plastic waste.

Long term trends in floating plastic pollution within a marine protected area identifies threats for Endangered northern bottlenose whales

"The Gully", situated off Nova Scotia, Canada, is the largest submarine canyon in the western North Atlantic. This unique oceanographic feature, which became a Marine Protected Area (MPA) in 2004, is rich in marine biodiversity and is part of the critical habitat of Endangered northern bottlenose whales (Hyperoodon ampullatus). To understand the potential impact of plastic pollution in the MPA and on this Endangered cetacean, we evaluated trends over time in the abundance and composition of plastics and compared these to the stomach contents of recently stranded northern bottlenose whales. From the 1990s-2010s, the median abundance of micro-sized (<5 mm) and small plastics (5 mm-2.5 cm) increased significantly, while the median abundance of large plastics (>2.5 cm) decreased significantly. Plastic abundance from the 2010s for micro-sized and small plastics varied from 5586-438 196 particles km-2, higher than previously measured estimates for surrounding offshore areas. Polymers identified using FTIR spectroscopy included polyethylene, polypropylene, polyethylene terephthalate polyester, nylon, alkyds (paint), and natural and semi-synthetic cellulosic fibers. The abundance of large debris ranged from 0 to 108.6 items km-2 and consisted of plastic sheets and bags, food wrappers and containers, rope, fishing buoys, and small plastic fragments. Whale stomach contents contained fragments of fishing nets, ropes, bottle caps, cups, food wrappers, smaller plastic fragments, fibers, and paint flakes, consistent with the composition and character of items collected from their critical habitat. Despite being far from centres of human population, the unique oceanographic features of The Gully (i.e. currents and bathymetric complexity) may concentrate plastic debris, increasing exposure rates of whales to plastic pollution. The increase in micro-sized and small plastics over time suggests associated health and welfare impacts of ingested plastics should be accounted for in future recovery plans for this Endangered species.

First quantification and chemical characterization of atmospheric microplastics observed in Seoul, South Korea

This study is the first report on atmospheric microplastics (MPs) observed in five outdoor environments, including an urban forest, a business center, commercial areas, and a public transportation hub in Seoul, South Korea. Air samples were collected using an active air pump sampler for 24 h in each area only on days without rainfall. All observed microplastics are secondary microplastics, in the form of irregularly-shaped fragments or fibers produced through various degradation processes, rather than being primarily produced like microbeads. The abundance of atmospheric MPs varied depending on the environment (i.e., region, height, and time) from 0.33 to 1.21 MP m-3, with the average number of MPs being 0.72 MP m-3 (standard deviation ± 0.39). MPs in the urban forest was observed to be 27% lower in abundance than that in the urban center which is ∼3 km away. The central business district was observed to have a 25% higher abundance during weekdays than on weekends. Our results show the ubiquity of MPs in various areas from high-rise buildings to forests tens of kilometers away from their direct sources, and a positive correlation between the abundance of MP and human activity. Morphologically, the fragment type (87.4%) predominated over the fiber type (12.6%), and chemically, polypropylene (PP) and polyethylene terephthalate (PET) components accounted for 65% of the total MP. PP polymers were found in all observation sites and contributed to 59% of the total MP fragments. The observed fibrous MPs were mainly composed of PET (72.7%) and PP (18.2%) polymers. Compared to other large cities (Shanghai, Beijing, Paris), Seoul is exposed to low levels of atmospheric MPs and high proportions of PP polymers. This study is limited to atmospheric MPs observed in summer and further investigation of MPs is needed to comprehensively understand the distribution and cycle of MPs based on long-term monitoring of atmospheric MPs.

Biodegradation of different types of microplastics: Molecular mechanism and degradation efficiency

Microplastics are widely distributed and a major pollutant in our ecosystem. Microplastics (MPs) are very small size plastic (<5 mm) present in environment, which comes from industrial, agricultural and household wastes. Plastic particles are more durable due to the presence of plasticizers and chemicals or additives. These plastics pollutants are more resistant to degradation. Inadequate recycling and excessive use of plastics lead to a large amount of waste accumulating in the terrestrial ecosystem, causing a risk to humans and animals. Thus, there is an urgent need to control microplastic pollution by employing different microorganisms to overcome this hazardous issue for the environment. Biological degradation depends upon different aspects, including chemical structure, functional group, molecular weight, crystallinity and additives. Molecular mechanisms for degradation of MPs through various enzymes have not extremely studied. It is necessary to degrade the MPs and overcome this problem. This review approaches different molecular mechanisms to degrade different types of microplastics and summarize the degradation efficiency of different types of bacteria, algae and fungal strains. The present study also summarizes the potential of microorganisms to degrade different polymers and the role of different enzymes in degradation of microplastics. To the outstanding of our awareness, this is the first article devoted to the role of microorganisms with their degradation efficiency. Furthermore, it also summarizes the role of intracellular and extracellular enzymes in biological degradation mechanism of microplastics.

Biodegradation of Plastics Induced by Marine Organisms: Future Perspectives for Bioremediation Approaches

Plastic pollution is a distinctive element of the globalized world. In fact, since the 1970s the expansion and use of plastics, particularly in the consumer and commercial sectors, has given this material a permanent place in our lives. The increasing use of plastic products and the wrong management of end-of-life plastic products have contributed to increasing environmental pollution, with negative impacts on our ecosystems and the ecological functions of natural habitats. Nowadays, plastic pollution is pervasive in all environmental compartments. As aquatic environments are the dumping points for poorly managed plastics, biofouling and biodegradation have been proposed as promising approaches for plastic bioremediation. Known for the high stability of plastics in the marine environment, this represents a very important issue to preserve marine biodiversity. In this review, we have summarized the main cases reported in the literature on the degradation of plastics by bacteria, fungi, and microalgae and the degradation mechanisms involved, to highlight the potential of bioremediation approaches to reduce macro and microplastic pollution.

Gaseous products generated from polyethylene and polyethylene terephthalate during ultraviolet irradiation: Mechanism, pathway and toxicological analyses

The generation of various degradation products from microplastics (MPs) has been confirmed under ultraviolet (UV) irradiation. The gaseous products, primarily volatile organic compounds (VOCs), are usually overlooked, leading to potential unknown risks to humans and the environment. In this study, the generation of VOCs from polyethylene (PE) and polyethylene terephthalate (PET) under UV-A (365 nm) and UV-C (254 nm) irradiation in water matrixes were compared. More than 50 different VOCs were identified. For PE, UV-A-derived VOCs mainly included alkenes and alkanes. On this basis, UV-C-derived VOCs included various oxygen-containing organics, such as alcohols, aldehydes, ketones, carboxylic acid and even lactones. For PET, both UV-A and UV-C irradiation induced the generation of alkenes, alkanes, esters, phenols, etc., and the differences between these two reactions were insignificant. Toxicological prioritization prediction revealed that these VOCs have diverse toxicological profiles. The VOCs with the highest potential toxicity were dimethyl phthalate (CAS: 131-11-3) from PE and 4-acetylbenzoate (3609-53-8) from PET. Furthermore, some alkane and alcohol products also presented high potential toxicity. The quantitative results indicated that the yield of these toxic VOCs from PE could reach 10² μg g^-1 under UV-C treatment. The degradation mechanisms of MPs included direct scission by UV irradiation and indirect oxidation induced by diverse activated radicals. The former mechanism was dominant in UV-A degradation, while UV-C included both mechanisms. Both mechanisms contributed to the generation of VOCs. Generally, MPs-derived VOCs can be released from water to the air after UV irradiation, posing a potential risk to ecosystems and human beings, especially for UV-C disinfection indoors in water treatments.

Assessing the photodegradation potential of compounds derived from the photoinduced weathering of polystyrene in water

Benzoate (Bz^-) and acetophenone (AcPh) are aromatic compounds known to be produced by sunlight irradiation of polystyrene aqueous suspensions. Here we show that these molecules could react with ^•OH (Bz^-) and ^•OH + CO₃^•- (AcPh) in sunlit natural waters, while other photochemical processes (direct photolysis and reaction with singlet oxygen, or with the excited triplet states of chromophoric dissolved organic matter) are unlikely to be important. Steady-state irradiation experiments were carried out using lamps, and the time evolution of the two substrates was monitored by liquid chromatography. Photodegradation kinetics in environmental waters were assessed by a photochemical model (APEX: Aqueous Photochemistry of Environmentally-occurring Xenobiotics). In the case of AcPh, a competitive process to aqueous-phase photodegradation would be volatilisation followed by reaction with gas-phase ^•OH. As far as Bz^- is concerned, elevated dissolved organic carbon (DOC) levels could be important in protecting this compound from aqueous-phase photodegradation. Limited reactivity of the studied compounds with the dibromide radical (Br₂^•-, studied by laser flash photolysis) suggests that ^•OH scavenging by bromide, which yields Br₂^•-, would be poorly offset by Br₂^•--induced degradation. Therefore, photodegradation kinetics of Bz^- and AcPh should be slower in seawater (containing [Br^-] ~ 1 mM) compared to freshwaters. The present findings suggest that photochemistry would play an important role in both formation and degradation of water-soluble organic compounds produced by weathering of plastic particles.

Recent advances in micro (nano) plastics in the environment: Distribution, health risks, challenges and future prospects

Environmental micro(nano)plastics have become a significant global pollution problem due to the widespread use of plastic products. In this review, we summarized the latest research advances on micro(nano)plastics in the environment, including their distribution, health risks, challenges, and future prospect. Micro(nano)plastics have been found in a variety of environmental media, such as the atmosphere, water bodies, sediment, and especially marine systems, even in remote places like Antarctica, mountain tops, and the deep sea. The accumulation of micro(nano)plastics in organisms or humans through ingestion or other passive ways poses a series of negative impacts on metabolism, immune function, and health. Moreover, due to their large specific surface area, micro(nano)plastics can also adsorb other pollutants, causing even more serious effects on animal and human health. Despite the significant health risks posed by micro(nano)plastics, there are limitations in the methods used to measure their dispersion in the environment and their potential health risks to organisms. Therefore, further research is needed to fully understand these risks and their impacts on the environment and human health. Taken together, the challenges of micro(nano)plastics analysis in the environment and organisms must be addressed, and future research prospects need to be identified. Governments and individuals must take action to reduce plastic waste and minimize the negative impact of micro(nano)plastics on the environment and human health.

Photoaging process and mechanism of four commonly commercial microplastics

Microplastics (MPs) are the widespread emerging pollutants in the terrestrial systems, and photo-oxidation is an effective process for aging MPs on land. Here, four common commercial MPs were exposed to ultraviolet (UV) light to simulate the photo-aging of MPs on soil, and the changes in surface properties and eluates of photoaging MPs were studied. Results revealed that polyvinyl chloride (PVC) and polystyrene (PS) exhibited more pronounced physicochemical changes than polypropylene (PP) and polyethylene (PE) during photoaging on the simulated topsoil, due to the dechlorination of PVC and the debenzene ring of PS. Oxygenated groups accumulated in aged MPs were strongly correlated with dissolved organic matters (DOMs) leaching. Through analysis of the eluate, we found that photoaging altered the molecular weight and aromaticity of DOMs. PS-DOMs showed the greatest increase in humic-like substances after aging, whereas PVC-DOMs exhibited the highest amount of additive leaching. The chemical properties of additives explained their differences in photodegradation responses, which also accounted for the greater importance of chemical structure of MPs to their structural stability. These findings demonstrate that the extensive presence of cracks in aged MPs facilitates DOMs formation and the complexity of DOMs composition poses a potential threat to soil and groundwater safety.

Microplastics/nanoplastics released from facemasks as contaminants of emerging concern

Facemasks have become a global medical necessity and are a key preventive measure against COVID-19. Typically, facemasks (FMs) are fabricated from non-renewable polymers, particularly polypropylene (PP) and polyethylene (PE), which release secondary microplastic (MPs) due to the chemical, physical, and biological processes. In light of the widespread usage and improper disposal of single-use facemasks, there is concern about their environmental impact since they contribute to plastic pollution during and after pandemics. The repercussions of this have led to millions of tons of plastic waste being dumped into the environment. Due to lack of awareness and improper disposal, the occurrence of micro/nanoplastics released from facemasks in wastewater treatment plants and landfills poses a concern. Infiltration of wastewater treatment processes by micro/nanoplastics at various levels can be problematic because of their chemical nature and broad but small size. Thus, operational and process stability issues can arise during wastewater treatment processes. In addition, landfilling and illegal waste disposal are being used to dispose of potentially infectious COVID-19 waste, leading to an environmental threat to animal and human health and exacerbating plastic pollution. This paper reviews the fate of facemasks in the environment and the repercussions of improper waste management of facemasks in wastewater treatment plants, landfills, and ultimately the environment.

Microplastics and anthropogenic debris in rainwater from Bahia Blanca, Argentina

Concern about atmospheric microplastic (MP) contamination has increased in recent years. This study assessed the abundance of airborne anthropogenic particles, including MPs, deposited in rainfall in Bahia Blanca, southwest Buenos Aires, Argentina. Rainwater samples were collected monthly from March to December 2021 using an active wet-only collector consisting of a glass funnel and a PVC pipe that is only open during rain events. Results obtained show that all rain samples contained anthropogenic debris. The term "anthropogenic debris" is used to refer to the total number of particles as not all the particles found could be determined as plastic. Among all the samples, an average deposition of 77 ± 29 items (anthropogenic debris) m^-2d^-1 was found. The highest deposition was observed in November (148 items m^-2d^-1) while the lowest was found in March (46 items m^-2d^-1). Anthropogenic debris ranged in size from 0.1 mm to 3.87 mm with the most abundant particles being smaller than 1 mm (77.8%). The dominant form of particles found were fibers (95%), followed by fragments (3.1%). Blue color predominated (37.2%) in the total number of samples, followed by light blue (23.3%) and black (21.7%). Further, small particles (<2 mm), apparently composed of mineral material and plastic fibers, were recognized. The chemical composition of suspected MPs was examined by Raman microscopy. The analysis of μ-Raman spectra confirmed the presence of polystyrene, polyethylene terephthalate, and polyethylene vinyl acetate fibers and provided evidence of fibers containing industrial additives such as indigo dye. This is the first assessment of MP pollution in rain in Argentina.

Intertwined synergistic abiotic and biotic degradation of polypropylene pellets in marine mesocosms

The accumulation of plastic waste in the oceans has caused growing concern for its effects on marine life. The interactions of plastics with environmental factors have been linked to fragmentation to micro- and nanoparticles with different properties and consequences, but the mechanism of fragmentation has not been fully understood yet. In this work, we investigate the combined effect of marine communities and ultraviolet (UV) radiation towards the degradation of virgin and artificially weathered polypropylene (PP) pellets after a long-term incubation period in marine mesocosms. The surface chemical alterations and deterioration of the polymer, in conjunction with the attachment and evolution of marine bacterial communities, the development of biofilm and exopolymeric substances (EPS), as well as the colloidal properties (zeta-potential and hydrodynamic diameter) of the mesocosms were studied. The surface area of both types of pellets decreased over time, despite no concrete weight change being observed. Cell growth, EPS production and colloid particle size were correlated to the loss of area. Therefore, we propose that surface area could be effectively monitored, instead of weight loss, as an alternative indicator of polymer degradation in biodegradation experiments. Changes in the chemical structure of the polymer, in addition to the evolution of the biological factors, implied that a complex degradation process alternated between two phases: an abiotic phase, when UV irradiation contributes to the deterioration of the polymer surface layers and a biotic phase, when marine communities degrade the weathered polymer surface to reveal the underlying layer of virgin polymer. Finally, microscopic particles, produced as a result of the decrease in pellet area, promoted the aggregation of colloidal particles. The role and impacts of these colloidal particles in marine ecosystems are yet as unidentified as that of micro- and nano-sized plastic particles and call for further investigation.

Not so biodegradable: Polylactic acid and cellulose/plastic blend textiles lack fast biodegradation in marine waters

The resistance of plastic textiles to environmental degradation is of major concern as large portions of these materials reach the ocean. There, they persist for undefined amounts of time, possibly causing harm and toxicity to marine ecosystems. As a solution to this problem, many compostable and so-called biodegradable materials have been developed. However, to undergo rapid biodegradation, most compostable plastics require specific conditions that are achieved only in industrial settings. Thus, industrially compostable plastics might persist as pollutants under natural conditions. In this work, we tested the biodegradability in marine waters of textiles made of polylactic acid, a diffused industrially compostable plastic. The test was extended also to cellulose-based and conventional non-biodegradable oil-based plastic textiles. The analyses were complemented by bio-reactor tests for an innovative combined approach. Results show that polylactic acid, a so-called biodegradable plastic, does not degrade in the marine environment for over 428 days. This was also observed for the oil-based polypropylene and polyethylene terephthalate, including their portions in cellulose/oil-based plastic blend textiles. In contrast, natural and regenerated cellulose fibers undergo complete biodegradation within approximately 35 days. Our results indicate that polylactic acid resists marine degradation for at least a year, and suggest that oil-based plastic/cellulose blends are a poor solution to mitigate plastic pollution. The results on polylactic acid further stress that compostability does not imply environmental degradation and that appropriate disposal management is crucial also for compostable plastics. Referring to compostable plastics as biodegradable plastics is misleading as it may convey the perception of a material that degrades in the environment. Conclusively, advances in disposable textiles should consider the environmental impact during their full life cycle, and the existence of environmentally degradable disposal should not represent an alibi for perpetuating destructive throw-away behaviors.

Revealing the sorption mechanisms of carbamazepine on pristine and aged microplastics with extended DLVO theory

The co-occurrence of microplastics (MPs) and organic contaminants in aquatic environment can complexify their environmental fate via sorption interactions, especially when the properties of MPs can even vary due to the aging effect. Thus, quantitatively clarifying the sorption mechanisms is required to understand their environmental impacts. This study selected popularly occurring carbamazepine (CBZ) and four types of MPs as model systems, including polyethylene, polyvinyl chloride, polyethylene terephthalate and polystyrene in their pristine and aged forms, to investigate the sorption isotherms, kinetics, and desorption. The variation of MPs during the aging process were analyzed with scanning electron microscopy, contact angle, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. It was found that the aging process elevated the sorption capacity and intensified the desorption hysteresis of CBZ on MPs via increasing the surface roughness, decreasing the particle size, and altering the surficial chemistry of all MPs. The extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory was innovatively applied hereby to calculate the interfacial free energies and revealed that the hydrophobic interaction was significantly lessened after aging for all MPs with the slightly enhanced van der Waals interaction. Then the total interfacial free energies were dropped down for all MPs, which resulted in their declined specific sorption capacity. This work reveals the sorption mechanisms of CBZ on pristine and aged MPs with XDLVO and provides a useful reference to study the sorption of other neutral organics onto MPs.

Investigation of microplastic ingestion in commercial fish from Surabaya river, Indonesia

Microplastics (MPs) were recognized as emerging environmental contaminants and ubiquitously distributed in aquatic environments, including in commercial biota. Fish are estimated as one of the most susceptible aquatic biota to ingesting microplastic (MP). Commercial fish cultivation is commonly developed in urban rivers. This situation may lead to food web safety and human health risks because most fish products are commercially available for consumption. Surabaya River, one of the main rivers in Indonesia, has been polluted by MPs. This river takes essential parts for providing clean water for Surabaya City and fishery. This study aimed to investigate: (1) MP ingestion, abundance, characteristics in commercial fish species in Surabaya River, and (2) potential influencing factors to MP ingestion in the fish. The MP ingestion was found in gills and gastrointestinal tracts (GITs) of seven commercial fish species from the Surabaya River. The highest MP abundance was found in the gill of Trichopodus trichopterus (280.73 ± 162.25 particles/g WW), in the GIT of Rasbora argyrotaenia (358.75 ± 121.98 particles/g WW), and in Notopterus notopterus (186 ± 130.81 particles/individual). The MP abundance was positively correlated to fish body size. The predominant MP polymer in both fish organs was cellophane. These MPs were mostly fiber-shaped, large-sized, and black-colored. The MP ingestion in the fish might be influenced by active/passive uptake routes, specific feeding habits, preference habitats, fish size, and MP characteristics. This investigation reveals the occurrence of MP ingestion in commercial fish, which is closely associated with human health risks via trophic transfer by accidental consumption.

In-situ and real-time nano/microplastic coatings and dynamics in water using nano-DIHM: A novel capability for the plastic life cycle research

A novel nano-digital inline holographic microscope (nano-DIHM) was used to advance in-situ and real-time nano/microplastic physicochemical research, such as particle coatings and dynamic processes in water. Nano-DIHM data provided evidence of distinct coating patterns on nano/microplastic particles by oleic acid, magnetite, and phytoplankton, representing organic, inorganic, and biological coatings widely present in the natural surroundings. A high-resolution scanning transmission electron microscopy confirmed nano-DIHM data, demonstrating its nano/microplastic research capabilities. The sedimentation of two plastic size categories was examined: (a) ∼10 to 700 µm, and (b) ∼ 1 to 5 mm. Particle size was the primary factor affecting the sedimentation for studied (a) microplastics and (b) pellets. Two types of silicone rubbers exhibited different sedimentation processes. We also demonstrated that inorganic ions in seawater and oleic acid organic coatings altered the sedimentation velocity of studied plastics by 9 - 13% and 5 - 9%, respectively. Semi-empirical probability functions were developed and incorporated into a numerical model (CaMPSim-3D) to simulate the transport of studied microplastics and pellets in the Saint John River estuary. Water dynamics was the driving force of plastic transport, yet the accumulation of plastics was selectively dependant on particle physicochemical properties such as size and density by ∼ 7%. The usage of nano-DIHM for targeted identification of nano/microplastic hotspots and aquatic plastic wastes remediation were discussed.

Formulation Controls the Potential Neuromuscular Toxicity of Polyethylene Photoproducts in Developing Zebrafish

Sunlight transforms plastic into water-soluble products, the potential toxicity of which remains unresolved, particularly for vertebrate animals. We evaluated acute toxicity and gene expression in developing zebrafish larvae after 5 days of exposure to photoproduced (P) and dark (D) leachates from additive-free polyethylene (PE) film and consumer-grade, additive-containing, conventional, and recycled PE bags. Using a "worst-case" scenario, with plastic concentrations exceeding those found in natural waters, we observed no acute toxicity. However, at the molecular level, RNA sequencing revealed differences in the number of differentially expressed genes (DEGs) for each leachate treatment: thousands of genes (5442 P, 577 D) for the additive-free film, tens of genes for the additive-containing conventional bag (14 P, 7 D), and none for the additive-containing recycled bag. Gene ontology enrichment analyses suggested that the additive-free PE leachates disrupted neuromuscular processes via biophysical signaling; this was most pronounced for the photoproduced leachates. We suggest that the fewer DEGs elicited by the leachates from conventional PE bags (and none from recycled bags) could be due to differences in photoproduced leachate composition caused by titanium dioxide-catalyzed reactions not present in the additive-free PE. This work demonstrates that the potential toxicity of plastic photoproducts can be product formulation-specific.

Microplastics in coastal and oceanic surface waters and their role as carriers of pollutants of emerging concern in marine organisms

Microplastics (Mps) pose a significant environmental challenge with global implications. To examine the effect of Mps on coastal and oceanic surface waters, as well as in marine organisms, 167 original research papers published between January 2013 and September 2022 were analyzed. The study revealed an unequal distribution of research efforts across the world. Fragments and fibers were the most frequently detected particles in ocean surface waters and marine biota, which mainly consisted of colored and transparent microparticles. Sampling of Mps was primarily done using collecting nets with a mesh size of 330 μm. Most articles used a stereomicroscope and Fourier-Transform Infrared spectroscopy for identification and composition determination, respectively. Polyethylene and polypropylene were the most frequent polymers found, both in coastal waters and in marine organisms. The major impact observed on marine organisms was a reduction in growth rate, an increase in mortality, and reduced food consumption. The hydrophobic nature of plastics encourages the formation of biofilms called the "plastisphere," which can carry pollutants that are often toxic and can enter the food chain. To better define management measures, it is necessary to standardize investigations that assess Mp pollution, considering not only the geomorphological and oceanographic features of each region but also the urban and industrial occupation of the studied marine environments.

Identification and quantification of photodegradation products of disposed expanded polystyrene buoy used in aquaculture

This study investigated the chemicals extracted from an EPS buoy used in aquaculture, which were subsequently collected from a recycling center. It was observed that the chemicals generated upon photodegradation make disposed buoys more toxic. Analysis of the extracted chemicals revealed the presence of 37 compounds, with four compounds quantitatively determined. Further analysis showed that the quantity of compounds dissolved in seawater was significantly higher than the amount remaining on the buoy surface. Based on the assumption that the buoy was exposed to sunlight for a year, it was estimated that 14.44 mg of the four compounds dissolved into the ocean. Given that South Korea used over 7 million EPS buoys, photodegraded EPS buoys are expected to represent a significant source of potentially hazardous chemicals.