A review of the occurrence of pharmaceuticals and personal care products in Indian water bodies

Understudied and underestimated impacts of organic UV filters on terrestrial ecosystems

Organic UV filters (OUVFs) are vital components in various personal care products (PCPs) and commercial goods, with the annual consumption estimated at 10,000 tons. Consequently, the unavoidable use of OUVFs in PCPs and other unregulated commercial applications could present a considerable risk to human and environmental health. These chemical entities enter terrestrial ecosystems through wastewater discharge, agriculture, atmospheric deposition, and recreational activities. Compared to aqueous ecosystems, the effects of OUVFs on terrestrial environments should be more studied and potentially underestimated. The present review addresses the abovementioned gap by summarizing 189 studies conducted between 2006 and 2024, focusing on the analytical measures, occurrence, and ecotoxicological effects of OUVFs on terrestrial ecosystems. These studies underscore the harmful effects of certain OUVFs on the development, reproduction, and endocrine systems of terrestrial organisms, highlighting the necessity for comprehensive toxicological assessments to understand their impacts on non-target species in terrestrial ecosystems. Besides, by underscoring the ecological effects of OUVFs, this review aims to guide future research and inform regulatory measures to mitigate the risks posed by these widespread contaminants. Meanwhile, interdisciplinary research is essential, integrating environmental science, toxicology, ecology, and chemistry to tackle OUVF challenges in terrestrial ecosystems.

Estimation of anti-diabetes drug metformin in Turkiye using wastewater-based epidemiology

Metformin is the most commonly used drug for the treatment of type 2 diabetes (T2D), which is dramatically increasing due to factors such as increasing obesity, physical inactivity, and aging of the population. Metformin analysis was carried out in composite wastewater samples seasonally collected from wastewater treatment plants in 10 cities in 2019 and 2020 30 cities in 2021 in Turkiye. Metformin was measured in all wastewater samples, with an average concentration of 97.81 μg/l in 2019, 75.19 μg/l in 2020, and 69.13 μg/l in 2021. This study was utilized to predict metformin usage in different sociodemographic regions in Turkiye using a wastewater-based epidemiology (WBE) approach. As a result of the analysis, the average metformin consumption in Turkiye was estimated to be 22.2 ± 9.6 [1.9-63.8] g/d/1,000 persons (mean ± SD [range]). Furthermore, these estimates were compared with data for time, sociodemographic characteristics, and patient numbers. Assessing the correlation with estimates and the socioeconomic classes of the cities in question revealed that cities with high-income levels had the lowest metformin use rate. Finally, the study provides supporting data aiding the development of public health strategies for decreasing the overall load of T2D across Turkiye.

Recent progress in electro-Fenton technology for the remediation of pharmaceutical compounds in aqueous environments

The global focus on wastewater treatment has intensified in the contemporary era due to its significant environmental and human health impacts. Pharmaceutical compounds (PCs) have become an emerging concern among various pollutants, as they resist conventional treatment methods and pose a severe environmental threat. Advanced oxidation processes (AOPs) emerge as a potent and environmentally benign approach for treating recalcitrant pharmaceuticals. To address the shortcomings of traditional treatment methods, a technology known as the electro-Fenton (EF) method has been developed more recently as an electrochemical advanced oxidation process (EAOP) that connects electrochemistry to the chemical Fenton process. It has shown effective in treating a variety of pharmaceutically active compounds and actual wastewaters. By producing H2O2 in situ through a two-electron reduction of dissolved O2 on an appropriate cathode, the EF process maximizes the benefits of electrochemistry. Herein, we have critically reviewed the application of the EF process, encompassing diverse reactor types and configurations, the underlying mechanisms involved in the degradation of pharmaceuticals and other emerging contaminants (ECs), and the impact of electrode materials on the process. The review also addresses the factors influencing the efficiency of the EF process, such as (i) pH, (ii) current density, (iii) H2O2 concentration, (iv) and others, while providing insight into the scalability potential of EF technology and its commercialization on a global scale. The review delves into future perspectives and implications concerning the ongoing challenges encountered in the operation of the electro-Fenton process for the treatment of PCs and other ECs.

Using Er/Cd-Codoped Bi4O5Br2 Microspheres to Enhance Antibiotic Degradation under Visible Illumination: A Combined Experimental and DFT Investigation

High levels of antibiotic accumulation and the difficulty of degradation can have serious consequences for the environment and, therefore, require urgent attention. To solve this problem, a synergistic Er and Cd ion-codoped Bi4O5Br2 photocatalyst was proposed. The degradation rate of sulfamethoxazole (SMX) by Er/Cd-Bi4O5Br2 was eight times higher than that of pure Bi4O5Br2, exceeding that of single Er-doped or Cd-doped Bi4O5Br2, which was attributed to the ability of Er/Cd-Bi4O5Br2 to generate a variety of free radicals. Experimental results and theoretical calculations suggested a possible mechanism for the improved photocatalytic degradation rate. The reduction of the band gap can facilitate the production of electron-hole pairs, which play a significant role in the production of reactive radicals. Furthermore, an optimal stabilized structure of the ErCd-Bi4O5Br2 dopant system was identified based on the formation energy formulas of different ligand configurations. These findings offer promising potential for the degradation of broad-spectrum antibiotics and provide valuable insights for the design and modification of photocatalytic materials.

Encapsulation of Cu-modified SnO2 yolk-shell in V2O5-amalgamated wrinkled g-C3N4 lamella for boosting antibiotic photodegradation

The remarkable application of tin oxide in various domains is indebted to its photoelectronic merits. However, significant efforts to discover its photocatalytic potential were restricted through arduous challenges, which were the amelioration of light-harvesting and -utilizing. In fact, the uncommon light absorption energy has drawn veil over the brilliance of astounding oxidation potential, which is much more than that of TiO2. Herein, our attention was focused on the taking advantages of self-template structure for simultaneously enjoying the two sides of photoelectronic justification as well as the S-step system for eminent charge dissociation. In this regard, the optimized Cu-modified SnO2 yolk-shell ((5)YS-CuSnO) spheres were engineered through the copper modulation into glycerate-assisted metal-organic structure. As a result, the exceptional light-harvesting was achieved through desirable defects and oxygen vacancy resulted from Cu-doping, and also efficient light-utilization was obtained by the multi-scattering/reflection effect resulted from multi-shell configuration. After the effectual incorporation (40 wt⁒) of (5)YS-CuSnO was encapsulated into the V2O5-decorated wrinkled g-C3N4 lamella (VO-WCN), the dual S-step VO-WCN@(5)YS-CuSnO introduced unprecedented levofloxacin (LFC) decontamination performance, which was kinetically 5.2 and 30.2-times greater than of the (5)YS-CuSnO and bare SnO2 yolk-shell. The conspicuous fulfillment of nanocomposite was manifested in the LFC mineralization, pharmaceutical effluent treatment within 360 min, and successive cycling reactions. The fusion of the extraordinary architecture of YS-CuSnO with S-Step system not only initiates the facile and practical photocatalytic exploitation, but shade light on some undeveloped side of tin oxide.

Wastewater reuse and pharmaceutical pollution in agriculture: Uptake, transport, accumulation and metabolism of pharmaceutical pollutants within plants

The presence of pharmaceutical pollutants in water sources has become a growing concern due to its potential impacts on human health and other organisms. The physicochemical properties of pharmaceuticals based on their intended therapeutical application, which include antibiotics, hormones, analgesics, and antidepressants, is quite diverse. Their presence in wastewater, sewerage water, surface water, ground water and even in drinking water is reported by many researchers throughout the world. Human exposure to these pollutants through drinking water or consumption of aquatic and terrestrial organisms has raised concerns about potential adverse effects, such as endocrine disruption, antibiotic resistance, and developmental abnormalities. Once in the environment, they can persist, undergo transformation, or degrade, leading to a complex mixture of contaminants. Application of treated wastewater, compost, manures or biosolids in agricultural fields introduce pharmaceutical pollutants in the environment. As pharmaceuticals are diverse in nature, significant differences are observed during their uptake and accumulation in plants. While there have been extensive studies on aquatic ecosystems, the effect on agricultural land is more disparate. As of now, there are few reports available on the potential of plant uptake and transportation of pharmaceuticals within and between plant organs. This review summarizes the occurrence of pharmaceuticals in aquatic water bodies at a range of concentrations and their uptake, accumulation, and transport within plant tissues. Research gaps on pharmaceutical pollutants' specific effect on plant growth and future research scopes are highlighted. The factors affecting uptake of pharmaceuticals including hydrophobicity, ionization, physicochemical properties (pKa, logKow, pH, Henry's law constant) are discussed. Finally, metabolism of pharmaceuticals within plant cells through metabolism phase enzymes and plant responses to pharmaceuticals are reviewed.

The Z-Scheme MIL-88B(Fe)/BiOBr Heterojunction Promotes Fe(III)/Fe(II) Cycling and Photocatalytic-Fenton-Like Synergistically Enhances the Degradation of Ciprofloxacin

The Z-scheme MIL-88B/BiOBr (referred to as MxBy, whereas x and y are the mass of MIL-88B(Fe) and BiOBr) heterojunction photocatalysts are successfully prepared by a facile ball milling method. By adding low concentration H2O2 under visible light irradiation, the Z-scheme heterojunction and photocatalytic-Fenton-like reaction synergistically enhance the degradation and mineralization of ciprofloxacin (CIP). Among them, M50B150 showed efficient photodegradation efficiency and excellent cycling stability, with 94.6% removal of CIP (10 mg L-1) by M50B150 (0.2 g L-1) under 90 min of visible light. In the MxBy heterojunctions, the rapid transfer of photo-generated electrons not only directly decomposed H2O2 to generate ·OH, but also improved the cycle of Fe3+/Fe2+ pairs, which facilitated the reaction with H2O2 to generate ·OH and ·O2 - radicals. In addition, the effects of photocatalyst dosages, pH of CIP solution, and coexisting substances on CIP removal are systematically investigated. It is found that the photocatalytic- Fenton-like reaction can be carried out at a pH close to neutral conditions. Finally, the charge transfer mechanism of the Z-scheme is verified by electron spin resonance (ESR) signals. The ecotoxicity of CIP degradation products is estimated by the T.E.S.T tool, indicating that the constructed photocatalysis-Fenton-like system is a green wastewater treatment technology.

Dynamics of antimicrobial resistance and susceptibility profile in full-scale hospital wastewater treatment plants

Drug resistance has become a matter of great concern, with many bacteria now resist multiple antibiotics. This study depicts the occurrence of antibiotic-resistant bacteria (ARB) and resistance patterns in five full-scale hospital wastewater treatment plants (WWTPs). Samples of raw influent wastewater, as well as pre- and post-disinfected effluents, were monitored for targeted ARB and resistance genes in September 2022 and February 2023. Shifts in resistance profiles of Escherichia coli, Pseudomonas aeruginosa, and Acinetobacter baumannii antimicrobial-resistant indicators in the treated effluent compared to that in the raw wastewater were also worked out. Ceftazidime (6.78 × 105 CFU/mL) and cefotaxime (6.14 × 105 CFU/mL) resistant species showed the highest concentrations followed by ciprofloxacin (6.29 × 104 CFU/mL), and gentamicin (4.88 × 104 CFU/mL), in raw influent respectively. WWTP-D employing a combination of biological treatment and coagulation/clarification for wastewater decontamination showed promising results for reducing ARB emissions from wastewater. Relationships between treated effluent quality parameters and ARB loadings showed that high BOD5 and nitrate levels were possibly contributing to the persistence and/or selection of ARBs in WWTPs. Furthermore, antimicrobial susceptibility tests of targeted species revealed dynamic shifts in resistance profiles through treatment processes, highlighting the potential for ARB and ARGs in hospital wastewater to persist or amplify during treatment.

Solar photocatalytic degradation of ciprofloxacin using biochar supported zinc oxide- tungsten oxide photocatalyst

Ciprofloxacin (CIP) is an antibiotic used to treat bacterial infections. It is not completely broken down during conventional wastewater treatment processes and can persist in the environment, leading to the development of antibiotic-resistant bacteria. This study focuses on the solar photocatalytic degradation CIP using biochar-supported photocatalysts. The photocatalysts developed by combining ZnO and WO3 in different ratios (1:2, 1:1, 2:1) were supported on hemp herd biochar. The photocatalyst made with a ratio of 2:1:1 of ZnO:WO3:biochar (Z2W1H) reported the highest CIP degradation efficiency of 87.3% and TOC removal efficiency of 43.1% at a catalyst dosage of 2 g/L, initial CIP concentration of 3 mg/L, and treatment time of 150 min. Subsequently, the effects of operating parameters on CIP degradation were investigated using central composite design (CCD). About 85.4% degradation efficiency of CIP was obtained at optimum conditions (pH ∼8.4, initial CIP concentration ∼4.4 mg/L, catalytic dosage ∼3.4 g/L) within 90 min. A quadradic model was developed to interpret the linear and interactive effect of operating parameters on the CIP degradation efficiency with 2.24-4.59% error. The adsorption-desorption study showed around 42.21% of adsorbed CIP was desorbed from Z2W1H. Scavenger studies demonstrated that the CIP breakdown was notably done by the superoxide radical (O2•-). The mechanism of CIP degradation was adsorption on biochar and subsequent degradation by photocatalyst. The prevalent degradation reactions such as C-N bond cleavage, decarboxylation, decarbonylation, defluorination, and ring opening lead to formation of various intermediates. The Z2W1H reusability test showed ~ 4.2% decrease in CIP removal efficiency after three cycles.

Neurotoxic effects of carbamazepine on the mosquitofish Gambusia affinis

In recent years, the presence of pharmaceuticals in the aquatic environment has gained a significant attention. Carbamazepine, a commonly prescribed antiepileptic drug, has been consistently found in aquatic environments at concentrations ranging from nanograms to micrograms, raising concerns about its potential negative impacts on aquatic organisms. The study examined the acute and chronic neurotoxic effects of environmentally relevant and sublethal concentrations of carbamazepine in the mosquitofish Gambusia affinis. After a 96-hour exposure period, the median lethal concentration (LC50) of carbamazepine for G. affinis was determined as 24 mg L - 1. For the current study, sublethal concentrations i.e., one-tenth (2.4 mg L - 1) and one-fifth (4.8 mg L - 1) of the LC50 value were chosen for assessing the neurotoxic effects along with the environmentally relevant concentration (13 ng L - 1). The research findings indicated that carbamazepine had a disruptive impact on the typical growth and behavior of the fish. During the acute exposure phase, physical deformities were observed in the fish, resulting in neonatal and postneonatal fatalities. Furthermore, the neurotoxic effects of carbamazepine were clearly demonstrated through alterations in various neurological parameters, including acetylcholinesterase, dopamine, gamma-aminobutyric acid, serotonin, monoamine oxidase, 5-hydroxyindole acetic acid, adrenaline, and nor-adrenaline. These findings raise concerns about the survival of fish populations in their natural environment.

Sustainable removal of caffeine and acetaminophen from water using biomass waste-derived activated carbon: Synthesis, characterization, and modelling

The removal of caffeine (CFN) and acetaminophen (ACT) from water using low-cost activated carbons prepared from artichoke leaves (AAC) and pomegranate peels (PAC) was reported in this paper. These activated carbons were characterized using various analytical techniques. The results showed that AAC and PAC had surface areas of 1203 and 1095 m2 g-1, respectively. The prepared adsorbents were tested for the adsorption of these pharmaceuticals in single and binary solutions. These experiments were performed under different operating conditions to evaluate the adsorption properties of these adsorbents to remove CFN and ACT. AAC and PAC showed maximum adsorption capacities of 290.86 and 258.98 mg g-1 for CFN removal, 281.18 and 154.99 mg g-1 for the ACT removal over a wide pH range. The experimental equilibrium adsorption data fitted to the Langmuir model and the kinetic data were correlated with the pseudo-second order model. AAC showed the best adsorption capacities for the removal of these pharmaceuticals in single systems and, consequently, it was tested for the simultaneous removal of these pollutants in binary solutions. The simultaneous adsorption of these compounds on AAC was improved using the central composite design and response surface methodology. The results indicated an antagonistic effect of CFN on the ACT adsorption. AAC regeneration was also analyzed and discussed. A statistical physics model was applied to describe the adsorption orientation of the tested pollutants on both activated carbon samples. It was concluded that AAC is a promising adsorbent for the removal of emerging pollutants due to its low cost and reusability properties.

Role of biochar in superoxide-dominated dye degradation in catalyst-activated peroxymonosulphate process

In recent times, the application of biochar (BC) as an upcoming catalyst for the elimination of recalcitrant pollutants has been widely explored. Here, an iron loaded bamboo biochar activated peroxymonosulphate (PMS) process was tested for removing Congo red (CR) dye from water medium. The catalyst was synthesized using a green synthesis method using neem extracts and characterized using SEM, FTIR, and XRD. The effects of various operating parameters, including solution pH, catalyst dosage, and pollutant dosage, on dye degradation efficiency were examined. The results showed that at the optimized conditions of 300 mg L-1 PMS concentration, 200 mg L-1 catalyst dosage, and pH 6, about 89.7% of CR dye (initial concentration 10 ppm) was removed at 60 min of operation. Scavenging experiments revealed the significant contribution of O2•-, •OH, and 1O2 for dye degradation, with a major contribution of O2•-. The activation of PMS was mainly done by biochar rather than iron (loaded on biochar). The catalyst was highly active even after four cycles.

Emerging Contaminants in the Effluent of Wastewater Should Be Regulated: Which and to What Extent?

Effluent discharged from urban wastewater treatment plants (WWTPs) is a major source of emerging contaminants (ECs) requiring effective regulation. To this end, we collected discharge datasets of pharmaceuticals (PHACs) and endocrine-disrupting chemicals (EDCs), representing two primary categories of ECs, from Chinese WWTP effluent from 2012 to 2022 to establish an exposure database. Moreover, high-risk ECs' long-term water quality criteria (LWQC) were derived using the species sensitivity distribution (SSD) method. A total of 140 ECs (124 PHACs and 16 EDCs) were identified, with concentrations ranging from N.D. (not detected) to 706 μg/L. Most data were concentrated in coastal regions and Gansu, with high ecological risk observed in Gansu, Hebei, Shandong, Guangdong, and Hong Kong. Using the assessment factor (AF) method, 18 high-risk ECs requiring regulation were identified. However, only three of them, namely carbamazepine, ibuprofen, and bisphenol-A, met the derivation requirements of the SSD method. The LWQC for these three ECs were determined as 96.4, 1010, and 288 ng/L, respectively. Exposure data for carbamazepine and bisphenol-A surpassed their derived LWQC, indicating a need for heightened attention to these contaminants. This study elucidates the occurrence and risks of ECs in Chinese WWTPs and provides theoretical and data foundations for EC management in urban sewage facilities.

Ecological and human health risk assessment of pharmaceutical compounds in the Sirsa River of Indian Himalayas

The Baddi-Barotiwala-Nalagarh (BBN) region of Indian Himalayas is one of the most important pharmaceutical industrial clusters in Asia. This study investigated the distribution, and ecological and human health risks of four most frequently used pharmaceuticals [ciprofloxacin (CIP), norfloxacin (NOR), cetirizine (CTZ) and citalopram oxalate (ECP)] when co-occurring with metal ions in the Sirsa river water of the BBN region. The concentration range of the selected pharmaceuticals was between 'not detected' to 50 μgL-1 with some exception for CIP (50-100 μgL-1) and CTZ (100-150 μgL-1) in locations directly receiving wastewater discharges. A significant correlation was found between the occurrences of NOR and Al (r2 = 0.65; p = 0.01), and CTZ and K (r2 = 0.50; p = 0.01) and Mg (r2 = 0.50; p = 0.01). A high-level ecological risk [risk quotient (RQ) > 1] was observed for algae from all the pharmaceuticals. A medium-level risk (RQ = 0.01-0.1) was observed for Daphnia from CIP, NOR and ECP, and a high-level risk from CTZ. A low-level risk was observed for fishes from CIP and NOR, whereas CTZ and ECP posed a high-level risk to fishes. The overall risk to ecological receptors was in the order: CTZ > CIP > ECP > NOR. Samples from the river locations receiving water from municipal drains or situated near landfill and pharmaceutical factories exhibited RQ > 1 for all pharmaceuticals. The average hazard quotient (HQ) values for the compounds followed the order: CTZ (0.18) > ECP (0.15) > NOR (0.001) > CIP (0.0003) for children (0-6 years); ECP (0.49) > CTZ (0.29) > NOR (0.005) > CIP (0.001) for children (7-17 years), and ECP (0.34) > CTZ (0.21) > NOR (0.007) > CIP (0.001) for adults (>17 years). The calculated risk values did not readily confirm the status of water as safe or unsafe because the values of predicted no-effect concentration (PNEC) would depend on various other environmental factors such as quality of the toxicity data, and species sensitivity and distribution, which warrants further research.

Mitigating Contaminant-Driven Risks for the Safe Expansion of the Agricultural-Sanitation Circular Economy in an Urbanizing World

The widespread adoption of an agricultural circular economy requires the recovery of resources such as water, organic matter, and nutrients from livestock manure and sanitation. While this approach offers many benefits, we argue this is not without potential risks to human and environmental health that largely stem from the presence of contaminants in the recycled resources (e.g., pharmaceuticals, pathogens). We discuss context specific challenges and solutions across the three themes: (1) contaminant monitoring; (2) collection transport and treatment; and (3) regulation and policy. We advocate for the redesign of sanitary and agricultural management practices to enable safe resource reuse in a proportionate and effective way. In populous urban regions with access to sanitation provision, processes can be optimized using emergent technologies to maximize removal of contaminant from excreta prior to reuse. Comparatively, in regions with limited existing capacity for conveyance of excreta to centralized treatment facilities, we suggest efforts should focus on creation of collection facilities (e.g., pit latrines) and decentralized treatment options such as composting systems. Overall, circular economy approaches to sanitation and resource management offer a potential solution to a pressing challenge; however, to ensure this is done in a safe manner, contaminant risks must be mitigated.

Silk Industry Waste Protein-Derived Sericin Hybrid Nanoflowers for Antibiotics Remediation via Circular Economy

Hybrid protein-copper nanoflowers have emerged as promising materials with diverse applications in biocatalysis, biosensing, and bioremediation. Sericin, a waste biopolymer from the textile industry, has shown potential for fabricating such nanoflowers. However, the influence of the molecular weight of sericin on nanoflower morphology and peroxidase-like activity remains unexplored. This work focused on the self-assembly of nanoflowers using high- and low-molecular-weight (HMW and LMW) silk sericin combined with copper(II) as an inorganic moiety. The peroxidase-like activity of the resulting nanoflowers was evaluated using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and hydrogen peroxide (H2O2). The findings revealed that high-molecular-weight sericin hybrid nanoflowers (HMW-ShNFs) exhibited significantly higher peroxidase-like activity than low-molecular-weight sericin hybrid nanoflowers (LMW-ShNFs). Furthermore, HMW-ShNFs demonstrated superior reusability and storage stability, thereby enhancing their potential for practical use. This study also explored the application of HMW-ShNF for ciprofloxacin degradation to address the environmental and health hazards posed by this antibiotic in water. The results indicated that HMW-ShNFs facilitated the degradation of ciprofloxacin, achieving a maximum degradation of 33.2 ± 1% at pH 8 and 35 °C after 72 h. Overall, the enhanced peroxidase-like activity and successful application in ciprofloxacin degradation underscore the potential of HMW-ShNFs for a sustainable and ecofriendly remediation process. These findings open avenues for the further exploration and utilization of hybrid nanoflowers in various environmental applications.

Current strategies on bioremediation of personal care products and detergents: Sustainability and life cycle assessment

The increased use of personal care products and detergents in modern society has raised concerns about their potential adverse effects on the environment. These products contain various chemical compounds that can persist in water bodies, leading to water pollution and ecological disturbances. Bioremediation has emerged as a promising approach to address these challenges, utilizing the natural capabilities of microorganisms to degrade or remove these contaminants. This review examines the current strategies employed in the bioremediation of personal care products and detergents, with a specific focus on their sustainability and environmental impact. This bioremediation is essential for environmental rejuvenation, as it uses living organisms to detergents and other daily used products. Its distinctiveness stems from sustainable, nature-centric ways that provide eco-friendly solutions for pollution eradication and nurturing a healthy planet, all while avoiding copying. Explores the use of microbial consortia, enzyme-based treatments, and novel biotechnological approaches in the context of environmental remediation. Additionally, the ecological implications and long-term sustainability of these strategies are assessed. Understanding the strengths and limitations of these bioremediation techniques is essential for developing effective and environmentally friendly solutions to mitigate the impact of personal care products and detergents on ecosystems.

Nanomaterials and biochar mediated remediation of emerging contaminants

The unrestricted release of various toxic substances into the environment is a critical global issue, gaining increased attention in modern society. Many of these substances are pristine to various environmental compartments known as contaminants/emerging contaminants (ECs). Nanoparticles and emerging sorbents enhanced remediation is a compelling methodology exhibiting great potential in addressing EC-related issues and facilitating their elimination from the environment, particularly those compounds that demonstrate eco-toxicity and pose considerable challenges in terms of removal. It provides a novel technique enabling the secure and sustainable removal of various ECs, including persistent organic compounds, microplastics, phthalate, etc. This extensive review presents a critical perspective on the current advancements and potential outcomes of nano-enhanced remediation techniques such as photocatalysis, nano-sensing, nano-enhanced sorbents, bio/phyto-remediation, which are applied to clean-up the natural environment. In addition, when dealing with residual contaminants, special attention is paid to both health and environmental implications; therefore, an evaluation of the long-term sustainability of nano-enhanced remediation methods has been considered. The integrated mechanical approaches were thoroughly discussed and presented in graphical forms. Thus, the critical evaluation of the integrated use of most emerging remediation technologies will open a new dimension in environmental safety and clean-up program.

Occurrence and environmental risks of contaminants of emerging concern across the River Athi Basin, Kenya, in dry and wet seasons

Globally, the environmental occurrence of Contaminants of Emerging Concern (CECs) including pharmaceuticals (PhACs), personal care products (PCPs) and modern polar pesticides has raised ecological and human health awareness. However, as the developed world races against time to establish regulatory measures to mitigate their effects, developing nations including Kenya are lagging behind, partly due to unavailability of adequate data. In this work, a multi-residue analysis of 86 CECs was carried out on 198 surface water and 18 effluent samples collected at 24 sites across the River Athi basin area, Kenya, in both dry and rainy seasons. Overall, 57 CECs comprising 31 PhACs (0.4 ng L-1-142 μg L-1), 6 PCPs (0.7-570 ng L-1) and 20 pesticides (0.3 ng L-1-8.3 μg L-1) were detected. The maximum loads varied from 217 g day-1 (PCPs) to 46 kg day-1 (PhACs). Individually, carbamazepine, nevirapine, sulfamethoxazole and DEET were the most ubiquitous CECs, with detection frequencies (DF) higher than 80 %. The highest concentrations were observed at river sites that are heavily impacted by informal settlements, highlighting the critical role of slums in urban rivers pollution. At least 8 CECs including acetamiprid, alachlor, atrazine, diuron, nevirapine and paracetamol show potential risk to algae, Daphnia magna and fish, as exemplified by Risk Quotients (RQ) up to 174. Similarly, potential risk of antibiotic resistant bacteria development is evident (RQ up to 64), being driven by metronidazole, sulfamethoxazole and trimethoprim. Ultimately, further studies on the occurrence and distribution of antibiotic resistant bacteria within the basin and among the communities consuming untreated river water for drinking is merited.

Microbial biofilm metabolization of benzalkonium compounds (benzyl dimethyl dodecyl ammonium & benzyl dimethyl tetradecyl ammonium chloride)

Benzalkonium chlorides (BACs) are quaternary ammonium compounds (QUATs) that are used as biocides. The degradation of these compounds in wastewater treatment plants is essential to reduce their spread into the environment and thus prevent the development of QUAT-resistant genes. The biodegradation of two BACs (BAC-12 and BAC-14) was investigated in moving bed biofilm reactors (MBBRs). Degradation half-lives of 12 and 20 h for BAC-12 and - 14, respectively, were detected as well as the formation of 42 metabolites. Two new degradation pathways for the BACs were identified in this study: 1) one involving an ω-oxidation, followed by β-oxidation and 2) one via an ω-oxidation followed by an α-oxidation that was succeeded by β-oxidation. Similar metabolites were detected for both BAC-12 and BAC-14. Additional metabolites were detected in the study, that could not be assigned to the above-mentioned pathways, revealing even more metabolic pathways in the MBBR which is probably due to the complexity of the microbial community in the biofilm. Interestingly, both TP194 (Benzyl-(carboxymethyl)-dimethylazanium) and TP208B (Benzyl-(2-carboxyethyl)-dimethylazanium) were identified as end products of the ω/β-pathway and the α/β-pathway. TP208B, TP152 and TP250 that were identified in this study, as well as the known BDMA were discovered in the effluent of a wastewater treatment plant.

Environmental remediation of the norfloxacin in water by adsorption: Advances, current status and prospects

Antibiotics are considered as the new generation water pollutants as these disturb endocrine systems if water contaminated with antibiotics is consumed. Among many antibiotics norfloxacin is present in various natural water bodies globally. This antibiotic is considered an emerging pollutant due to its low degradation in aquatic animals. Besides, it has many side effects on human vital organs. Therefore, the present article discusses the recent advances in the removal of norfloxacin by adsorption. This article describes the presence of norfloxacin in natural water, consumption, toxicity, various adsorbents for norfloxacin removal, optimization factors for norfloxacin removal, kinetics, thermodynamics, modeling, adsorption mechanism and regeneration of the adsorbents. Adsorption takes place in a monolayer following the Langmuir model. The Pseudo-second order model represents the kinetic data. The adsorption capacity ranged from 0.924 to 1282 mg g-1. In this sense, the parameters such as the NFX concentration added to the adsorbent textural properties exerted a great influence. Besides, the fixed bed-based removal at a large scale is also included. In addition to this, the simulation studies were also discussed to describe the adsorption mechanism. Finally, the research challenges and future perspectives have also been highlighted. This article will be highly useful for academicians, researchers, industry persons, and government authorities for designing future advanced experiments.

Comparative removal of pharmaceuticals in aqueous phase by agricultural waste-based biochars

The intensification of pharmaceutical use globally has led to an increase in the number of water bodies contaminated by drugs, and an effective strategy must be developed to address this issue. In this work, several biochars produced from Miscanthus straw pellets (MSP550, MSP700) and wheat straw pellets (WSP550, WSP700) at 550 and 700°C, respectively, were selected as adsorbents for removing various pharmaceuticals, such as pemetrexed (PEME), sulfaclozine (SCL), and terbutaline (TBL), from the aqueous phase. The biochar characterizations (physicochemical properties, textural properties, morphological structures, and zeta potentials) and adsorptive conditions (contact times, temperatures, and pH effect) were investigated. The infrared and Raman spectra of biochars before and after pharmaceutical adsorption, as well as quantum chemical computations, were carried out to explore the adsorption mechanisms. The results showed that the general adsorption abilities of biochars for pharmaceuticals were in the order of WSP700 > MSP700 > MSP550 > WSP550. Both the higher drug concentration and higher temperature improved biochar adsorption. By decreasing the pH, the adsorption amounts increased for PEME and SCL. However, TBL exhibited the best adsorption at pH 7, whereas a weakening of affinity occurred at lower or higher pH values. Electrostatic interactions and hydrogen bonding were the main adsorptive mechanisms between all biochars and pharmaceuticals. π-π interactions played a role in the adsorption process of low-temperature-prepared biochars (MSP550 and WSP550). This work can provide new insights into the control of pharmaceuticals from water with low-cost adsorbents. PRACTITIONER POINTS: Use of biochars for pharmaceuticals removal from aqueous phase. Characterization of biochars : physical and chemical properties, textural and surface properties. Simulation calculation for characterization of pharmaceuticals. Kinetic studies of pharmaceuticals adsorption on biochars. DRIFTS and Raman analysis for the understanding of adsorption process.

Impact of chemical mixtures from wastewater treatment plant effluents on human immune cell activation: An effect-based analysis

BACKGROUND

Humans are exposed to many different chemicals on a daily basis, mostly as chemical mixtures, usually from food, consumer products and the environment. Wastewater treatment plant effluent contains mixtures of chemicals that have been discarded or excreted by humans and not removed by water treatment. These effluents contribute directly to water pollution, they are used in agriculture and may affect human health. The possible effect of such chemical mixtures on the immune system has not been characterized.

OBJECTIVE

The aim of this study was to investigate the effect of extracts obtained from four European wastewater treatment plant effluents on human primary immune cell activation.

METHODS

Immune cells were exposed to the effluent extracts and modulation of cell activation was performed by multi-parameter flow cytometry. Messenger-RNA (mRNA) expression of genes related to immune system and hormone receptors was measured by RT-PCR.

RESULTS

The exposure of immune cells to these extracts, containing 339 detected chemicals, significantly reduced the activation of human lymphocytes, mainly affecting T helper and mucosal-associated invariant T cells. In addition, basophil activation was also altered upon mixture exposure. Concerning mRNA expression, we observed that 12 transcripts were down-regulated by at least one extract while 11 were up-regulated. Correlation analyses between the analyzed immune parameters and the concentration of chemicals in the WWTP extracts, highlighted the most immunomodulatory chemicals.

DISCUSSION

Our results suggest that the mixture of chemicals present in the effluents of wastewater treatment plants could be considered as immunosuppressive, due to their ability to interfere with the activation of immune cells, a process of utmost importance for the functionality of the immune system. The combined approach of immune effect-based analysis and chemical content analysis used in our study provides a useful tool for investigating the effect of environmental mixtures on the human immune response.

Covalent organic frameworks: Pioneering remediation solutions for organic pollutants

Covalent Organic Frameworks (COFs) have emerged as a promising class of crystalline porous materials with customizable structures, high surface areas, and tunable functionalities. Their unique properties make them attractive candidates for addressing environmental contamination caused by pharmaceuticals, pesticides, industrial chemicals, persistent organic pollutants (POPs), and endocrine disruptors (EDCs). This review article provides a comprehensive overview of recent advancements and applications of COFs in removing and remedying various environmental contaminants. We delve into the synthesis, properties, and performance of COFs and their potential limitations and future prospects.

Reversing the damage: ecological restoration of polluted water bodies affected by pollutants due to anthropogenic activities

Aquatic ecosystems provide a large number of cultural, regulating, and supporting services to humans and play a pivotal role in sustaining freshwater-dependent ecosystems. However, an increase in human population coupled with economic growth in the last few decades has severely affected their functioning and ecological health. This has led to an increase in concentrations of pollutants originating from anthropogenic activities such as heavy metals, plastics, semi-volatile organic compounds, and endocrine disruptors. These pollutants provoke deleterious impacts on aquatic biodiversity and affect the water quality and functioning. In this paper, we discuss the sources and impacts of such pollutants as well as restoration techniques for reducing their impact on aquatic ecosystems. Several physical and chemical ecological restoration techniques, such as dredging, sediment capping, water diversion, adsorption, aeration, and flushing, can be employed to improve the water quality of water bodies. Additionally, biological techniques such as phytoremediation, phycoremediation, the use of biomembranes, and the construction of ecological floating beds can be employed to increase the population of aquatic organisms and improve the overall ecological health of aquatic ecosystems. Restoration techniques can effectively reduce the concentrations of suspended solids and dissolved phosphorus and increase the levels of dissolved oxygen. The restoration techniques for improving the ecological health of water bodies should not be limited to simply improving the water quality but should also focus on improving the biological processes and ecosystem functioning since it is essential to mitigate the adverse effects of pollutants and restore the vital ecosystem services provided by water bodies for future generations.

Systematic analysis of circadian disrupting substances with a high-throughput zebrafish circadian behavior screening approach

Circadian rhythm aligns numerous biological functions in majority of animals. Aside from well-known external factors such as the light-dark cycle and temperature, circadian rhythm can also be regulated by rarely explored factors such as synthetic substances. Here, we established a circadian behavior screening approach utilizing zebrafish larvae model, which integrated high-throughput capabilities with automated batch processing. With this approach, we systematically analyzed the circadian disruptive effects of >60 synthetic substances commonly detected in aquatic environment by assessing both the circadian period length and amplitude of circadian behavior, with an exposure concentration set at 100 μg/L. Among tested substances, a series of circadian disrupting compounds (circadian disruptors) were identified. Several categories of the hit compounds can be recognized, such as phthalate (diisopentyl phthalate (DIPP), with 10.1 % and 49.6 % increases for circadian period length and amplitude, respectively), neuroactive substance (mirtazapine, with 10.6 % and 63.1 % increases, respectively), and biocides (thiamethoxam, with 100.3 % increase for amplitude). Among these compounds, DIPP increased circadian period length and amplitude with a high degree. Aside from DIPP, we further examined eleven other phthalates and demonstrated that benzyl butyl phthalate, diisobutyl phthalate and diisohexyl phthalate could also significantly increase the zebrafish circadian period length by 7.9 %, 3.7 % and 8.5 %, respectively. Collectively, the present findings substantiated the feasibility of this high throughput screening strategy for circadian disruptor's discovery and provided novel insights into understanding of the potential risks of synthetic substances.

Preparation and evaluation of a coated smectite clay-based material modified with epichlorohydrin-dimethylamine for the diclofenac removal

This study reports the analysis of diclofenac removal from aqueous solution using a novel adsorbent coating with amphoteric surface. This adsorbent coating was improved using a new amphoteric ratio to increase its performance for the removal of pharmaceuticals such as diclofenac. The adsorbent coating was formulated using acrylic polymer emulsion, smectite-based clay powder and epichlorohydrin-dimethylamine to obtain a layer form via the implementation of a facile synthesis method. In a previous study, this adsorbent coating was successful to remove cationic and anionic dyes. Therefore, this research aimed to further investigate and test its application in the removal of other emerging water pollutants like pharmaceuticals. SEM, EDX, and FTIR analyses were carried out for the characterization of this novel adsorbent. The effects of adsorbent composition, diclofenac concentration, temperature, and solution pH were studied and modeled. The best conditions to improve the diclofenac adsorption was 303 K and pH 3 where the adsorption capacity was 25.59 mg/g. Adsorption isotherms and kinetics were quantified and modeled, and the corresponding adsorption mechanism was also analyzed. Diclofenac adsorption with this novel material was exothermic and spontaneous. This alternative adsorbent is promising for diclofenac removal from industrial wastewater systems.

Nanotechnology-assisted treatment of pharmaceuticals contaminated water

The presence of pharmaceutical compounds in wastewater due to an increase in industrialization and urbanization is a serious health concern. The demand for diverse types of pharmaceutical compounds is expected to grow as there is continuous improvement in the global human health standards. Discharge of domestic pharmaceutical personal care products and hospital waste has aggravated the burden on wastewater management. Further, the pharmaceutical water is toxic not only to the aquatic organism but also to terrestrial animals coming in contact directly or indirectly. The pharmaceutical wastes can be removed by adsorption and/or degradation approach. Nanoparticles (NPs), such as 2D layers materials, metal-organic frameworks (MOFs), and carbonaceous nanomaterials are proven to be more efficient for adsorption and/or degradation of pharmaceutical waste. In addition, inclusion of NPs to form various composites leads to improvement in the waste treatment efficacy to a greater extent. Overall, carbonaceous nanocomposites have advantage in the form of being produced from renewable resources and the nanocomposite material is biodegradable either completely or to a great extent. A comprehensive literature survey on the recent advancement of pharmaceutical wastewater is the focus of the present article.

Algal organic matter induced photodegradation of tinidazole

Antibiotic pollution has become one of the most emerging problems of the modern era. Tinidazole (TDZ) is one the most important nitroimidazole derivative drugs whose use has tremendously increased in the last few years. The proposed research work provides a good alternative cost-effective method for wastewater treatment. In the present investigation, algae were used as a photosensitizer in the treatment of the wastewater that was contaminated with antibiotic residue. The proposed research also provides the probable mechanism involved in the photodegradation of tinidazole. The different factors like concentration and pH of the test solution which play a key role in the photodegradation of drug molecules are also discussed in the present investigation. The result of this study established that the maximum degradation of drug molecules was observed at the algal concentration of 1.6 × 108 Cell/L and approximately 58% of drug molecules were degraded. This study also established that in an acidic medium ie at pH 5 the degradation occurs more efficiently. Results of the current study indicated that the use of algae-induced photodegradation of drug residue became one of the most promising routes for wastewater treatment. The results of the present study provide a new way to treat wastewater contaminated with antibiotics residue.

Comparative risk assessment studies estimating the hazard posed by long-term consumption of PPCPs in river water

This study assesses the risk due to Emerging Contaminants (ECs), present in Indian rivers - Ganga (650 million inhabitants), Yamuna (57 million inhabitants), and Musi (7,500,000 inhabitants), 13 ECs in total, have been used for risk assessment studies. Their concentrations (e.g., Fluconazole: 236950 μg/l, Ciprofloxacin: 31000 μg/l, Caffeine: 21.57 μg/l, etc.) were higher than the threshold concentrations for safe consumption (e.g. Fluconazole allowable level is 3.8 μg/l, and Ciprofloxacin allowable level is 0.51 μg/l). Three different pathways of emerging contaminants (ECs) transfer (oral water ingestion, oral fish ingestion, and dermal water contact) have been considered and the study is carried out in 2 ways: (i) deterministic and (ii) probabilistic approaches (using Monte Carlo iterative methods with 10000 simulations) with the aid of a software - Risk (version 7.5). The risk value, quantified by Hazard Quotient (HQ) is higher than the allowable limit of 1 for several compounds in the three rivers like Fluconazole (HQ = 18276.713), Ciprofloxacin (HQ = 278.675), Voriconazole (HQ = 14.578), Cetirizine (HQ = 1006.917), Moxifloxacin (HQ = 8.076), Caffeine (HQ = 55.150), and Ibuprofen (HQ = 9.503). Results show that Fluconazole and Caffeine pose the maximum risk in the rivers via the "oral pathway" that allows maximum transfer of the ECs present in the river (93% and 82% contribution to total risk). The risk values vary from nearly 25 times to 19000 times the United States Environmental Protection Agency (USEPA) threshold limit of 1 (e.g., Caffeine Infant Risk = 25.990 and Fluconazole Adult Risk = 18276.713). The most susceptible age group, from this study, is "Adults" (19-70 years old), who stand the chance of experiencing the adverse health hazards associated with prolonged over-exposure to the ECs present in the river waters. Musi has the maximum concentration of pollutants and requires immediate remediation measures. Further, both methods indicate that nearly 60-70% of the population in all the three study areas are at risk of developing health hazards associated with over-exposure to ECs regularly, making the areas inhabitable.

Microbial approaches for pharmaceutical wastewater recycling and management for sustainable development: A multicomponent approach

A microbial-driven approach for effluent treatment, recycling, and management of Pharmaceutical and Personal Care Products (PPCPs) has been undertaken to mitigate the menace of water contamination. Bioremediation processes are mainly considered the first preference in pharmaceutical wastewater recycling and management. PPCPs are reported as one of the primary sources of emerging contaminants in various water matrices, which raises concern and requires efficient management. Their widespread utilization, persistently high level, and resistance to breaking down make them one of the potentially dangerous compounds causing harm to the ecosystem. Continually increasing PPCPs level PPCPs contaminants in water bodies raised concern for human health as they can produce potential risks with harmful and untoward impacts on our health. PPCPs are composed of multiple diverse compounds used by humans and animals, which include biopharmaceuticals, vitamins and nutritional supplements, antibiotics, counter-prescription drugs, cosmetics products, and unused pharmaceutical products. Personal care products are found to be bioaccumulative, reduce water quality and potentially impact ecological health. However, continual exposure to PPCPs in aquatic organisms, impacts their endocrine function disruption, gene toxicity, and antibiotic resistance. Decreased water quality may result in an outbreak of various water-borne diseases, which could have acute or long-term health complications and may result in an outbreak of various water-borne diseases, which could have acute or long-term effects on public and community health. Polluted water consumption by humans and animals produces serious health hazards and increased susceptibility to water-borne diseases such as carcinogenic organic or inorganic contaminants and infectious pathogens present in water bodies. Many water resource recovery facilities working on various conventional and advanced methods involve the utilization of microbes for filtration and advanced oxidation processes. Therefore, there is an immense need for bioremediation techniques facilitated by mixed cultures of bacteria, algae, and other microbes that can be used as an alternative approach for removing pharmaceutical content from effluent. This review highlights the various sources of PPCPs and their impacts on soil and water bodies, resulting in bioaccumulation. Different techniques are utilized to detect PPCPs, and various control strategies imply controlling, recycling, and managing waste.

Treatment of pharmaceutical wastewater through activated sludge process-a critical review

The occurrence of pharmaceutical compounds in water is a rising issue in the environment. These drugs in the waste may be toxic to aquatic organisms and humans as they disrupt the endocrine system, cause genotoxicity, etc. Several techniques were used for the treatment of pharmaceutical wastewater, such as physical, chemical, physiochemical, and biological processes like adsorption, chemical coagulation, and activated sludge processes, but these techniques possess several merits and demerits, such as higher installation and operation costs. This technique is used to remove color and turbidity; reduce biochemical oxygen demand (BOD), chemical oxygen demand (COD), and total suspended solids (TSS) to permissible limits for reuse of effluent; and prevent diseases caused by pharmaceutical wastewater. This review focuses on the treatment of pharmaceutical wastewater containing drugs like antibiotics, depressants, and hormones, with the activated sludge process having several advantages like good quality effluent and low installation costs.

Congregating Ag into γ-Bi2O3 coupled with CoFe2O4 for enhanced visible light photocatalytic degradation of ciprofloxacin, Cr(VI) reduction and genotoxicity studies

The work attempts to construct a highly effective γ-Bi2O3/CoFe2O4/Ag visible active photocatalyst for the enhanced degradation of ciprofloxacin (CIP) and Cr(VI) reduction. γ-Bi2O3/CoFe2O4/Ag photocatalyst was prepared by simple solid phase and co-precipitation methods. The nanosphere shaped CoFe2O4 photocatalyst are embedded on top of γ-Bi2O3 nanotriangle. The addition of Ag into γ-Bi2O3/CoFe2O4 heterojunction primitively facilitates the photocatalytic activity in higher rate. The quantitative analysis of photocatalyst possesses to have lower e-/h+ recombination rate compared to its counterparts. The prepared γ-Bi2O3/CoFe2O4/Ag photocatalyst showed 96.6% degradation of CIP in 220 min and 99.2% reduction of Cr(VI) in 120 min. Additionally, γ-Bi2O3/CoFe2O4/Ag showed outstanding recyclability and long-term stability with a degradation efficiency of 96.5% even after six cycles. The intermediate products formed were identified and the degradation pathway was elucidated by gas chromatography-mass spectrometry analysis. Total organic carbon measurement was carried over to assess the efficiency of complete degradation and the removal percentage was found to be 98%. The end product toxicity study towards bacteria was proven to have less toxicity level when compared to parent compound. Lastly, the genotoxicity of γ-Bi2O3/CoFe2O4/Ag photocatalyst was tested in Allium cepa and the results confirmed to have no cause of toxicity impacts. Overall, the work not only tends to provide a highly visible active γ-Bi2O3/CoFe2O4/Ag photocatalyst, but also attributes to have no further negative imprints in the environment.

The fate of sulfamethoxazole and trimethoprim in a micro-aerated anaerobic membrane bioreactor and the occurrence of antibiotic resistance in the permeate

This study investigates the effects, conversions, and resistance induction, following the addition of 150 μg·L-1 of two antibiotics, sulfamethoxazole (SMX) and trimethoprim (TMP), in a laboratory-scale micro-aerated anaerobic membrane bioreactor (MA-AnMBR). TMP and SMX were removed at 97 and 86%, indicating that micro-aeration did not hamper their removal. These antibiotics only affected the pH and biogas composition of the process, with a significant change in pH from 7.8 to 7.5, and a decrease in biogas methane content from 84 to 78%. TMP was rapidly adsorbed onto the sludge and subsequently degraded during the long solids retention time of 27 days. SMX adsorption was minimal, but the applied hydraulic retention time of 2.6 days was sufficiently long to biodegrade SMX. The levels of three antibiotic-resistant genes (ARGs) (sul1, sul2, and dfrA1) and one mobile genetic element biomarker (intI1) were analyzed by qPCR. Additions of the antibiotics increased the relative abundances of all ARGs and intI1 in the MA-AnMBR sludge, with the sul2 gene folding 15 times after 310 days of operation. The MA-AnMBR was able to reduce the concentration of antibiotic-resistant bacteria (ARB) in the permeate by 3 log.

The development and application of a novel hazard scoring tool for assessing impacts of cosmetic ingredients on aquatic ecosystems: A case study of rinse-off cosmetics

The cosmetic industry has been committed to promoting less hazardous products to reduce the environmental impacts of cosmetic ingredients. This requires identifying safer cosmetic ingredients for developing cosmetic formulations that are less harmful to the environment. However, one of the challenges in developing eco-friendly cosmetics relies on integrating all environmental hazard (EH) information of cosmetic ingredients to select the most eco-friendly ones (i.e., ingredients least harmful to the aquatic environment). Thus, we developed a hazard scoring tool (IARA matrix), which integrates data on biodegradation, bioaccumulation, and acute aquatic toxicity, providing a hazard index to classify cosmetic ingredients (raw materials) into categories of EH (low, moderate, high, or very high). The classification of the IARA was based on parameters established by Cradle to Cradle (C2C), the US Environmental Protection Agency (USEPA), and European Regulation 1272/2008, considering the most conservative values of each source. The Leopold matrix was employed as a model for the tool, using a numerical scale from 0 to 6 (lowest to highest EH). According to the IARA, we have successfully demonstrated that ultraviolet (UV) filter ingredients have the highest EH out of 41 cosmetic ingredients commonly used for rinse-off products. In addition to UV filters, triclosan (bactericide) and dimethicone (emollient) presented the second-highest EH for aquatic ecosystems, and humectants presented the lowest hazard index. By applying the IARA in the case study of rinse-off products, we have estimated that the aquatic hazard of cosmetic products can be reduced 46% by identifying less hazardous ingredients and combining them into a cosmetic formulation. In summary, the IARA tool allows the estimation of the EH of cosmetic ingredients, provides safer products, and helps achieve sustainability for cosmetic products. Integr Environ Assess Manag 2023;19:1619-1635. © 2023 SETAC.

Capacitive deionization system with ultra-high salt adsorption performance: from lab design to agricultural applications

Capacitive deionization is an emerging water desalination technology for industrial applications. Recent advancements in electrode design and system development have led to the reporting of ultra-high salt adsorption performance, benefiting its potential application in agricultural water treatment at a potentially low cost. In this study, we provide a comprehensive summary of the porous electrode design strategy to achieve ultra-high ion adsorption performance, considering factors such as experimental parameters, chemically tuned material properties, redox chemistry and smart nanoarchitecture for future electrode design. Furthermore, we endeavor to establish a correlation between capacitive deionization (CDI) technology and its applicability in the agricultural sector, specifically concentrating on water treatment with an emphasis on undesirable ions associated with salinity, hardness, and heavy metals, to achieve harmless irrigation. Additionally, to ensure the efficient and cost-effective application of CDI systems in agriculture, a thorough overview of the literature on CDI cost analysis is presented. By addressing these aspects, we anticipate that ultra-high salt adsorption CDI systems hold great promise in future agricultural applications.

Prevalence of Endocrine Disrupting Chemicals in the urban wastewater treatment systems of Dehradun, India: Daunting presence of Estrone

We quantified the occurrences and seasonal variations of the target endocrine disrupting chemicals (EDCs) at four (two major municipals, and two academic institutions) WWTPs in Dehradun city, Uttarakhand, India. The results showed estrone in higher concentrations at μgL-1 levels in influent among the WWTPs, compared to triclosan (TCS) at ngL-1 levels. An astounding concentration of 123.95 μgL-1 was recorded for the estrone in the influent, which is to date the highest ever recorded, globally. Statistical data treatment was performed to test the distribution of the data (Shapiro-Wilk, Anderson-Darling, Lilliefors, and Jarque-Bera tests), and the significant difference between the mean of the wastewater sample population (ANOVA: F statistics, p values, Mann-Whitney test, Tukey's and Dunn's post hoc analysis). Statistical data treatment indicated EDCs concentration with a bi-modal distribution. The Shapiro-Wilk, Anderson-Darling, Lilliefors, and Jarque-Bera tests elucidate a non-normal distribution for the EDCs sample data. A statistically significant difference (F = 8.46; p < 0.0001) in the seasonal data for the abundance of the target EDCs at the WWTPs have been observed. Highest and significantly different mean EDCs concentrations were recorded during the monsoon, compared to the spring (p = 0.025) and summer (p = 0.0004) seasons in the influent waters. The mean influent concentrations of TCS and estrone in monsoon were 66.45 ngL-1 and 78.02 μgL-1, respectively. Maximum removals were recorded for TCS, while maximum negative removal of ∼293% was observed for estrone in the WWTPs. Particularly, the high levels of estrone in the wastewater pose a significant threat as estrone presence could be led to feminization, dysregulation of reproduction in organisms, and carcinogenesis processes in the environment. This study critically highlights the limitation of the WWTPs in the treatment, degradation, and assimilation of EDCs leading to their hyperaccumulation at WWTP effluents, thereby posing a substantial threat to nearby aquatic ecosystems, human health, and the ecological balance of the region.

Synergetic effects of catalyst-surface dual-electric centers and microbes for efficient removal of ciprofloxacin in water

Antibiotics and antibiotic resistance genes (ARGs) are still a problem in biological treatment. Herein, we propose a synergetic strategy between microbes and dual-electric centers catalysts (CCN/Cu-Al2O3/ceramsite) for Ciprofloxacin (CIP)-contained (5 mg/L) water treatment in an up-flow biological filter. CIP was cleaved into small molecules by the catalyst, bringing a 57.6% removal and reducing 10.5% ARG. The characterization results verified that a Cu-π electrostatic force occurs on the catalyst surface, forming electron-rich areas around Cu and electron-poor areas at the carbon-doped g-C3N4 (CCN) aromatic ring. Thus, the electrons of adsorbed CIP were delocalized and then captured by the adsorbed extracellular polymeric substance at the electron-rich areas. Therefore, the synergetic process weakened the stress of CIP on bacteria and reduced ARG accumulation. It also enriched more electro-active bacteria on the surface of CCN/Cu-Al2O3/ceramsite, promoting the expression of extracellular electron transfer-related genes and reconstructing the energy metabolism mode. This result provides an opportunity for refractory antibiotic treatment in the biological process.

Single and multi-antibiotics removal via peroxymonosulfate activation using molybdenum disulfide (MoS2): Central composite design and degradation pathway

The efficacy of molybdenum disulfide (MoS2) for the degradation of metronidazole (MET), tetracycline (TET), and ciprofloxacin (CIP) in single and multicomponent systems through peroxymonosulfate (PMS) activation was investigated. Several characterization techniques, such as SEM, XRD, XPS, and EPR were performed to understand the removal mechanism of the three antibiotics in PMS/MoS2 system. In single component system with an initial antibiotic concentration of 10 mg L-1, >95% removal of MET, TET, and CIP were observed within 60 min (PMS = 100 mg L-1; MoS2 = 0.5 g L-1). It was observed that sulfate radical (SO4.-) and reactive ≡Mo- OOSO3- complex played a major role in the removal of antibiotics. Adsorption on MoS2 and direct oxidation by PMS contributed to the removal of TET and CIP in MoS2/PMS system. A Central composite design (CCD) with response surface methodology (RSM) was used to model the removal of MET, TET, and CIP in a multi-antibiotic system. The presence of multiple antibiotics affected the performance of MoS2/PMS system as antibiotics competed for the adsorption sites on MoS2 and the generated reactive species. CIP predominantly deterred the removal of both MET and TET. On the other hand, MET removal was decreased up to 25-40% in the presence of both TET and CIP. Similarly, TET removal decreased up to 15-20% in the presence of MET and CIP. CIP removal decreased up to 15-25% in the presence of MET and TET. In the presence of multiple antibiotics, the deterring effect of one pollutant over another can be overcome by increasing the MoS2 concentration above 1200 mg L-1 and PMS above 200 mg L-1 to obtain 100% removal of all three pollutants. Overall, MoS2 could be an ideal catalyst for the removal of antibiotics through PMS activation.

Prioritizing pharmaceutically active compounds (PhACs) based on occurrence-persistency-mobility-toxicity (OPMT) criteria: an application to the Brazilian scenario

A study of Quantitative Structure Activity Relationship (QSAR) was performed to assess the possible adverse effects of 25 pharmaceuticals commonly found in the Brazilian water compartments and to establish a ranking of environmental concern. The occurrence (O), the persistence (P), the mobility (M), and the toxicity (T) of these compounds in the Brazilian drinking water reservoirs were evaluated. Moreover, to verify the predicted OPMT dataset outcomes, a quality index (QI) was also developed and applied. The main results showed that: (i) after in silico predictions through VEGA QSAR, 19 from 25 pharmaceuticals consumed in Brazil were classified as persistent; (ii) moreover, after in silico predictions through OPERA QSAR, 15 among those 19 compounds considered persistent, were also classified as mobile or very mobile. On the other hand, the results of toxicity indicate that only 9 pharmaceuticals were classified with the highest toxicity level. Ultimately, the QI of 7 from 25 pharmaceuticals were categorized as 'optimal'; 15 pharmaceuticals were categorized as 'good'; and only 3 pharmaceuticals were categorized as 'regular'. Therefore, based on the QI criteria used, it is possible to assume that this OPMT prediction dataset had a good reliability. Efforts to reduce emissions of OPMT-pharmaceuticals in Brazilian drinking water reservoirs are encouraged.

Levels, consumption, and variations of eight artificial sweeteners in the wastewater treatment plants of Dalian city, China

Artificial sweeteners (ASs) are emerging contaminants in the environment, primarily derived from wastewater treatment plant (WWTP) effluents. In this study, the influents and effluents of three WWTPs in the Dalian urban area, China, were analyzed for the distribution of 8 typical ASs to investigate their seasonal fluctuations in the WWTPs. The results showed that acesulfame (ACE), sucralose (SUC), cyclamate (CYC), and saccharin (SAC) were both detected in the influent and effluent water samples of WWTPs, with concentrations ranging from not detected (ND) to 14.02 μg·L-1. In addition, SUC was the most abundant ASs type, accounting for 40 %-49 % and 78 %-96 % of the total ASs in the influent and effluent water, respectively. The WWTPs revealed high removal efficiencies of CYC, SAC, and ACE, while the SUC removal efficiency was poor (26 % ± 36 %). The ACE and SUC concentrations were higher in spring and summer, and all ASs showed lower levels in winter, which may be caused by the high consumption of ice-cream in warmer months. The per capita ASs loads in the WWTPs were determined in this study based on the wastewater analysis results. The calculated per capita daily mas loads for individual ASs ranged from 0.45 g·d-1·1000p-1 (ACE) to 2.04 g·d-1·1000p-1 (SUC). In addition, the relationship between per capita ASs consumption and socioeconomic status showed no significant correlation.

Applying weight of evidence methods to assessing exposure in aquatic environments: Comparing lines of evidence

Weight of evidence (WoE) is a useful approach to quantifying the relative relevance, strength, reliability, and uncertainty associated with estimates of exposure concentrations. WoE is often used in exposure assessments but rarely explored or discussed in detail. In this article, the utility of a WoE approach in aquatic exposure assessments is illustrated via two case studies using a tiered approach and the chemical triclosan. Each case study evaluates the same chemical and pathway to the environment but with substantially different data strength, reliability, and uncertainty. The collection and qualitative evaluation of relevant lines of evidence (LoE) using a three-tiered approach are discussed. Our results demonstrate how a higher tiered WoE approach can reduce uncertainty and improve decision-making based on predicted exposure concentrations. We also identify LoE that played a significant role in the final exposure determinations and describe a framework for conducting exposure assessments using WoE. Integr Environ Assess Manag 2023;19:1207-1219. © 2022 SETAC.

Removal of micropollutants and ecotoxicity during combined biological activated carbon and ozone (BO3) treatment

Ozonation is a viable option to improve the removal of micropollutants (MPs) in wastewater treatment plants (WWTPs). Nevertheless, the application of ozonation is hindered by its high energy requirements and by the uncertainties regarding the formation of toxic transformation products in the process. Energy requirements of ozonation can be reduced with a pre-ozone treatment, such as a biological activated carbon (BAC) filter, that removes part of the effluent organic matter before ozonation. This study investigated a combination of BAC filtration followed by ozonation (the BO3 process) to remove MPs at low ozone doses and low energy input, and focused on the formation of toxic organic and inorganic products during ozonation. Effluent from a WWTP was collected, spiked with MPs (approximately 1 µg/L) and treated with the BO3 process. Different flowrates (0.25-4 L/h) and specific ozone doses (0.2-0.6 g O3/g TOC) were tested and MPs, ecotoxicity and bromate were analyzed. For ecotoxicity assessment, three in vivo (daphnia, algae and bacteria) and six in vitro CALUX assays (Era, GR, PAH, P53, PR, andNrf2 CALUX) were used. Results show that the combination of BAC filtration and ozonation has higher MP removal and higher ecotoxicity removal than only BAC filtration and only ozonation. The in vivo assays show a low ecotoxicity in the initial WWTP effluent samples and no clear trend with increasing ozone doses, while most of the in vitro assays show a decrease in ecotoxicity with increasing ozone dose. This suggests that for the tested bioassays, feed water and ozone doses, the overall ecotoxicity of the formed transformation products during ozonation was lower than the overall ecotoxicity of the parent compounds. In the experiments with bromide spiking, relevant formation of bromate was observed above specific ozone doses of approximately 0.4 O3/g TOC and more bromate was formed for the samples with BAC pre-treatment. This indirectly indicates the effectivity of the pre-treatment in removing organic matter and making ozone more available to react with other compounds (such as MPs, but also bromide), but also underlines the importance of controlling the ozone dose to be below the threshold to avoid formation of bromate. It was concluded that treatment of the tested WWTP effluent in the BO3 process at a specific ozone dose of 0.2 g O3/g TOC, results in high MP removal at limited energy input while no increase in ecotoxicity, nor formation of bromate was observed under this condition. This indicates that the hybrid BO3 process can be implemented to remove MPs and improve the ecological quality of this WWTP effluent with a lower energy demand than conventional MP removal processes such as standalone ozonation.

An overview on the prevalence and potential impact of antimicrobials and antimicrobial resistance in the aquatic environment of India

India at present is one of the leading countries in antimicrobial drug production and use, leading to increasing antimicrobial resistance (AMR) and public health problems. Attention has mainly been focused on the human and food animals' contribution to AMR neglecting the potential contribution of the perceptibly degraded aquatic environment in India. The paper reviews the available published literature in India on the prevalence of antimicrobial residues and their dissemination pathways in wastewater of pharmaceutical industries, sewage treatment plants, hospitals, riverine, community pond water, and groundwater. The prevalence of antimicrobial residue concentration, pathogenic and non-pathogenic bacteria antimicrobial resistant bacteria (ARB), their drug resistance levels, and their specific antimicrobial resistant genes (ARGs) occurring in various water matrices of India have been comprehensively depicted from existing literature. The concentration of some widely used antimicrobials recorded from the sewage treatment plants and hospital wastewater and rivers in India has been compared with other countries. The ecotoxicological risk posed by these antimicrobials in the various water matrices in India indicated high hazard quotient (HQ) values for pharmaceutical effluents, hospital effluents, and river water. The degraded aquatic environment exhibited the selection of a wide array of co-existent resistant genes for antibiotics and metals. The review revealed improper use of antibiotics and inadequate wastewater treatment as major drivers of AMR contaminating water bodies in India and suggestion for containing the challenges posed by AMR in India has been proposed.

Bioaccumulation of pharmaceuticals and personal care products (PPCPs) in freshwater pearl mussels Hyriopsis cumingii in Poyang Lake

Thirty-five PPCPs were measured in representative freshwater pearl mussels (Hyriopsis cumingii) in Poyang Lake, the largest lake of China, as well as their responses to sedimentary PPCPs. We observed 32 PPCPs in soft tissues of mussels at a total concentration of 2721.5 ± 929.3 ng·g-1 dry weight (dw), much higher than those in sediments (21 PPCPs, 273.2 ± 89.4 ng·g-1 dw). Anti-inflammatories were the primary contaminants detected in both sediments and mussels. PPCP concentrations in mussels exhibited significant organ-specific characteristics, and gonads were identified as a hotspot for these contaminants. Correlation analysis showed that gonads were more likely to assimilate triclosan from sediments. Biochemical analysis revealed a higher physiological sensitivity of glutathione synthesis in gonads to sedimentary PPCPs, suggesting the long-term oxidative damage. Our findings highlight the concern on the potential effects of sedimentary PPCPs to propagation of mussels, and emphasize the necessity to formulate strategies for sedimentary PPCPs control targeting a healthy lake.

Tracking drugged waters from various sources to drinking water-its persistence, environmental risk assessment, and removal techniques

Pharmaceuticals have become a major concern due to their nature of persistence and accumulation in the environment. Very few studies have been performed relating to its toxicity and ill effects on the aquatic/terrestrial flora and fauna. The typical wastewater and water treatment processes are not efficient enough to get these persistent pollutants treated, and there are hardly any guidelines followed. Most of them do not get fully metabolized and end up in rivers through human excreta and household discharge. Various methods have been adopted with the advancement in technology, sustainable methods are more in demand as they are usually cost-effective, and hardly any toxic by-products are produced. This paper aims to illustrate the concerns related to pharmaceutical contaminants in water, commonly found drugs in the various rivers and their existing guidelines, ill effects of highly detected pharmaceuticals on aquatic flora and fauna, and its removal and remediation techniques putting more emphasis on sustainable processes.

A systematic review on photo-Fenton process as an efficient advanced oxidation for degradation of amoxicillin in aqueous environments

Amoxicillin (AMX) is one of the antibiotics in the penicillin category that is used in various fields. Considering the harmful effects of its remains, it is necessary to survey the ways to remove this compound. Advanced oxidation process (AOPs), specially photo-Fenton has been used for the removal of AMX. This study has been conducted based on PubMed, Google Scholar, DOAJ, Web of Science, and Scopus databases during the years 2008-2019. Some factors such as the aquatic solution, light source characteristics, iron, and H₂O₂ concentration, AMX degradation percentage, removal of total organic carbon percentage, and AMX concentration have been surveyed to optimize the process. Studies showed that the photo-Fenton process is highly dependent on pH, and in most studies, the highest efficiency has been observed in acidic pH values. Using a more energy light source can be effective in reducing the use of catalysts and oxidizers. The combined methods of AOPs such as photo-Fenton, electro-Fenton, and photo-electro-Fenton have higher efficiency in increasing mineralization than the photon process. The use of synthetic wastewater has a higher efficiency in the degradation of AMX than in real wastewater in the photo-Fenton process, which can be due to the absence of the interfering agents in synthetic environments.

Low temperature pyrolytic biochar is a preferred choice for sulfonamide-Cu(II) contaminated soil remediation in tropical climate region

Biochar is getting increasing consideration for eco-friendly soil amendment and environmental remediation. Once added to the soil, biochar would undergo the natural ageing process, affecting its physicochemical properties and, as a result, the adsorption and immobilization of pollutants in the water and soil. To evaluate the high/low temperature pyrolyzed biochar performance on complex contaminants and the effect of climate ageing, the batch experiments were conducted on the adsorption of the pollutants of antibiotics sulfapyridine (SPY) and a typical coexisting heavy metal Cu²⁺ as one or binary system on low/high pyrolytic temperature biochars before and after the simulated tropical climate and frigid climate region ageing treatment. The results showed that high-temperature ageing could enhance the SPY adsorption in biochar-amended soil. The SPY sorption mechanism was fully elucidated, and the result confirmed that H-bonding was the dominant role in biochar-amended soil, and π-π electron-donor-acceptor (EDA) interaction and micro-pore filling was another factor for SPY adsorption. This study could lead to the conclusion that low-temperature pyrolytic biochar is a better option for sulfonamide-Cu(II) contaminated soil remediation in tropical regions.

Exploration of an efficient method for removing antibiotics from water and digested sewage sludge using Fe(VI): Kinetics and P phytoavailability and compostability in treated sludge

Potassium ferrate (K₂FeO₄) containing hexavalent iron [Fe(VI)] is an environmentally friendly oxidant, which possesses strong oxidizing power to treat wastewater and sludge. Therefore, the present study investigated degradation of selected antibiotics, namely levofloxacin (LEV), ciprofloxacin (CIP), oxytetracycline (OTC), and azithromycin (AZI), in water and anaerobically digested sewage sludge samples using Fe(VI). The effects of different Fe(VI) concentrations and initial pH values on antibiotic removal efficiency were evaluated. Under the studied conditions, LEV and CIP were almost completely removed from water samples, following second-order kinetics. In addition, over 60% of the four selected antibiotics were removed from sludge samples using 1 g L^-1 Fe(VI). Furthermore, P phytoavailability and compostability of Fe(VI)-treated sludge were evaluated using different extraction reagents and a small composting unit. The extraction efficiency of phytoavailable P using 2% citric acid and neutral ammonium citrate was approximately 40% and 70%, respectively. The mixture of Fe(VI)-treated sludge and rice husk was self-heated in a closed composting reactor through the biodegradation of organic matter derived from the treated sludge. Therefore, Fe(VI)-treated sludge may be used as an organic material containing phytoavailable P for compost.

Evaluating ionic liquids for its potential as eco-friendly solvents for naproxen removal from water sources using COSMO-RS: Computational and experimental validation

An emerging contaminant of concern in aqueous streams is naproxen. Due to its poor solubility, non-biodegradability, and pharmaceutically active nature, the separation is challenging. Conventional solvents employed for naproxen are toxic and harmful. Ionic liquids (ILs) have attracted great attention as greener solubilizing and separating agent for various pharmaceuticals. ILs have found extensive usage as solvents in nanotechnological processes involving enzymatic reactions and whole cells. The employment of ILs can enhance the effectiveness and productivity of such bioprocesses. To avoid cumbersome experimental screening, in this study, conductor like screening model for real solvents (COSMO-RS) was used to screen ILs. Thirty anions and eight cations from various families were chosen. Activity coefficient at infinite dilution, capacity, selectivity, performance index, molecular interactions using σ-profiles and interaction energies were used to make predictions about solubility. According to the findings, quaternary ammonium cations, highly electronegative, and food-grade anions will form excellent ionic liquid combinations for solubilizing naproxen and hence will be better separating agents. This research will contribute easy designing of ionic liquid-based separation technologies for naproxen. In different separation technologies, ionic liquids can be employed as extractants, carriers, adsorbents, and absorbents.