Engineered nanomaterial-mediated changes in the metabolism of terrestrial plants

Dose-Dependent Effect on Plant Growth of Exposure to Metal-Organic Framework MIL-101(Cr)

With the increasing use of metal-organic frameworks (MOFs), they will inevitably enter the environment intentionally or unintentionally. However, the effects of MOFs on plant growth are poorly understood. Here, we investigated the effects of exposure of the rhizosphere to MOFs on plant growth. MIL-101(Cr) was selected as a research model due to its commercial availability and wide use. Soybean plants at the two-leaf stage were subjected to various durations (1-7 days) and concentrations (0-1000 mg/L) of exposure in hydroculture with a control group treated with ultrapure water. We found that MIL-101(Cr) had a positive effect on soybean growth at a lower dose (i.e., 200 mg/L); however, at higher doses (i.e., 500 and 1000 mg/L), it exhibited significant toxicity to plant growth, which is evidenced by leaf damage. To investigate the mechanism of this effect, we used Cr as an indicator to quantify, track, and image MIL-101(Cr) in the plant with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Results indicated that MIL-101(Cr) primarily accumulated in the cortex of roots (up to 40 times higher than that in stems), with limited translocation to stems and negligible presence in leaves and cotyledons. In addition, metabolomic analysis of soybeans indicated that low-dose MIL-101(Cr) could increase the sucrose content of soybean roots to promote plant growth, while a high dose could induce lipid oxidation in roots. This study provides valuable insights into the ecological toxicology of MOFs and underscores the importance of assessing their environmental impact for sustainable agricultural practices.

The Impact of Nanomaterials on Photosynthesis and Antioxidant Mechanisms in Gramineae Plants: Research Progress and Future Prospects

As global food security faces challenges, enhancing crop yield and stress resistance becomes imperative. This study comprehensively explores the impact of nanomaterials (NMs) on Gramineae plants, with a focus on the effects of various types of nanoparticles, such as iron-based, titanium-containing, zinc, and copper nanoparticles, on plant photosynthesis, chlorophyll content, and antioxidant enzyme activity. We found that the effects of nanoparticles largely depend on their chemical properties, particle size, concentration, and the species and developmental stage of the plant. Under appropriate conditions, specific NMs can promote the root development of Gramineae plants, enhance photosynthesis, and increase chlorophyll content. Notably, iron-based and titanium-containing nanoparticles show significant effects in promoting chlorophyll synthesis and plant growth. However, the impact of nanoparticles on oxidative stress is complex. Under certain conditions, nanoparticles can enhance plants' antioxidant enzyme activity, improving their ability to withstand environmental stresses; excessive or inappropriate NMs may cause oxidative stress, affecting plant growth and development. Copper nanoparticles, in particular, exhibit this dual nature, being beneficial at low concentrations but potentially harmful at high concentrations. This study provides a theoretical basis for the future development of nanofertilizers aimed at precisely targeting Gramineae plants to enhance their antioxidant stress capacity and improve photosynthesis efficiency. We emphasize the importance of balancing the agricultural advantages of nanotechnology with environmental safety in practical applications. Future research should focus on a deeper understanding of the interaction mechanisms between more NMs and plants and explore strategies to reduce potential environmental impacts to ensure the health and sustainability of the ecosystem while enhancing the yield and quality of Gramineae crops.

Comparative morpho-physiological and biochemical responses of Capsicum annuum L. plants to multi-walled carbon nanotubes, fullerene C60 and graphene nanoplatelets exposure under water deficit stress

Water deficit stress is one of the most significant environmental abiotic factors influencing plant growth and metabolism globally. Recently, encouraging outcomes for the use of nanomaterials in agriculture have been shown to reduce the adverse effects of drought stress on plants. The present study aimed to investigate the impact of various carbon nanomaterials (CNMs) on the physiological, morphological, and biochemical characteristics of bell pepper plants subjected to water deficit stress conditions. The study was carried out as a factorial experiment using a completely randomized design (CRD) in three replications with a combination of three factors. The first factor considered was irrigation intensity with three levels [(50%, 75%, and 100% (control) of the field capacity (FC)] moisture. The second factor was the use of carbon nanomaterials [(fullerene C60, multi-walled carbon nanotubes (MWNTs) and graphene nanoplatelets (GNPs)] at various concentrations [(control (0), 100, 200, and 1000 mg/L)]. The study confirmed the foliar uptake of CNMs using the Scanning Electron Microscopy (SEM) technique. The effects of the CNMs were observed in a dose-dependent manner, with both stimulatory and toxicity effects being observed. The results revealed that exposure to MWNTs (1000 mg/L) under well-watered irrigation, and GNPs treatment (1000 mg/L) under severe drought stress (50% FC) significantly (P < 0.01) improved fruit production and fruit dry weight by 76.2 and 73.2% as compared to the control, respectively. Also, a significant decrease (65.9%) in leaf relative water content was obtained in plants subjected to soil moisture of 50% FC over the control. Treatment with GNPs at 1000 mg/L under 50% FC increased electrolyte leakage index (83.6%) compared to control. Foliar applied MWNTs enhanced the leaf gas exchange, photosynthesis rate, and chlorophyll a and b concentrations, though decreased the oxidative shock in leaves which was demonstrated by the diminished electrolyte leakage index and upgrade in relative water content and antioxidant capacity compared to the control. Plants exposed to fullerene C60 at 100 and 1000 mg/L under soil moisture of 100 and 75% FC significantly increased total flavonoids and phenols content by 63.1 and 90.9%, respectively, as compared to the control. A significant increase (184.3%) in antioxidant activity (FRAP) was observed in plants exposed to 200 mg/L MWCNTs under irrigation of 75% FC relative to the control. The outcomes proposed that CNMs could differentially improve the plant and fruit characteristics of bell pepper under dry conditions, however, the levels of changes varied among CNMs concentrations. Therefore, both stimulatory and toxicity effects of employed CNMs were observed in a dose-dependent manner. The study concludes that the use of appropriate (type/dose) CNMs through foliar application is a practical tool for controlling the water shortage stress in bell pepper. These findings will provide the basis for more research on CNMs-plant interactions, and with help to ensure their safe and sustainable use within the agricultural chains.

Effect of luminescent materials on the biochemistry, ultrastructure, and rhizobial microbiota of Spirodela polyrhiza

Fluorescent materials and technologies have become widely used in scientific research, and due to the ability to convert light wavelengths, their application to photosynthetic organisms can affect their development by altering light quality. However, the impacts of fluorescent materials on aquatic plants and their environmental risks remain unclear. To assess the effects of luminescent materials on floating aquatic macrophytes and their rhizosphere microorganisms, 4-(di-p-tolylamino)benzaldehyde-A (DTB-A) and 4-(di-p-tolylamino)benzaldehyde-M (DTB-M) (emitting blue-green and orange-red light, respectively) were added individually and jointly to Spirodela polyrhiza cultures and set at different concentrations (1, 10, and 100 μM). Both DTB-A and DTB-M exhibited phytotoxicity, which increased with concentration under separate treatment. Moreover, the combined group exhibited obvious stress relief at 10 μM compared to the individually treated group. Fluorescence imaging showed that DTB-A and DTB-M were able to enter the cell matrix and organelles of plant leaves and roots. Peroxidation induced cellular damage, contributing to a decrease in superoxide dismutase (SOD) and peroxidase (POD) activities and malondialdehyde (MDA) accumulation. Decomposition of organelle structures, starch accumulation in chloroplasts, and plasmolysis were observed under the ultrastructure, disrupting photosynthetic pigment content and photosynthesis. DTB-A and DTB-M exposure resulted in growth inhibition, dry weight loss, and leaf yellowing in S. polyrhiza. A total of 3519 Operational Taxonomic Units (OTUs) were identified in the rhizosphere microbiome. The microbial communities were dominated by Alphaproteobacteria, Oxyphotobacteria, and Gammaproteobacteria, with the abundance and diversity varied significantly among treatment groups according to Shannon, Simpson, and Chao1 indices. This study revealed the stress defense response of S. polyrhiza to DTB-A and DTB-M exposures, which provides a broader perspective for the bioremediation of pollutants using aquatic plants and supports the further development of fluorescent materials for applications.

Impact of nanopollution on plant growth, photosynthesis, toxicity, and metabolism in the agricultural sector: An updated review

Nanotechnology provides distinct benefits to numerous industrial and commercial fields, and has developed into a discipline of intense interest to researchers. Nanoparticles (NPs) have risen to prominence in modern agriculture due to their use in agrochemicals, nanofertilizers, and nanoremediation. However, their potential negative impacts on soil and water ecosystems, as well as plant growth and physiology, have caused concern for researchers and policymakers. Concerns have been expressed regarding the ecological consequences and toxicity effects associated with nanoparticles as a result of their increased production and usage. Moreover, the accumulation of nanoparticles in the environment poses a risk, not only because of the possibility of plant damage but also because nanoparticles may infiltrate the food chain. In this review, we have documented the beneficial and detrimental effects of NPs on seed germination, shoot and root growth, plant biomass, and nutrient assimilation. Nanoparticles exert toxic effects by inducing ROS generation and stimulating cytotoxic and genotoxic effects, thereby leading to cell death in several plant species. We have provided possible mechanisms by which nanoparticles induce toxicity in plants. In addition to the toxic effects of NPs, we highlighted the importance of nanomaterials in the agricultural sector. Thus, understanding the structure, size, and concentration of nanoparticles that will improve plant growth or induce plant cell death is essential. This updated review reveals the multifaceted connection between nanoparticles, soil and water pollution, and plant biology in the context of agriculture.

Chitosan-Se Engineered Nanomaterial Mitigates Salt Stress in Plants by Scavenging Reactive Oxygen Species

Soil salinity seriously hinders the sustainable development of green agriculture. The emergence of engineered nanomaterials has revolutionized agricultural research, providing a new means to overcome the limitations associated with current abiotic stress management and achieve highly productive agriculture. Herein, we synthesized a brand-new engineered nanomaterial (Cs-Se NMs) through the Schiff base reaction of oxidized chitosan with selenocystamine hydrochloride to alleviate salt stress in plants. After the addition of 300 mg/L Cs-Se NMs, the activity of superoxide dismutase, catalase, and peroxidase in rice shoots increased to 3.19, 1.79, and 1.85 times those observed in the NaCl group, respectively. Meanwhile, the MDA levels decreased by 63.9%. Notably, Cs-Se NMs also raised the transcription of genes correlated with the oxidative stress response and MAPK signaling in the transcriptomic analysis. In addition, Cs-Se NMs augmented the abundance and variety of rhizobacteria and remodeled the microbial community structure. These results provide insights into applying engineered nanomaterials in sustainable agriculture.

Exposure to single-walled carbon nanotubes differentially affect in vitro germination, biochemical and antioxidant properties of Thymus daenensis celak. seedlings

Carbon nanomaterials such as single-walled carbon nanotubes (SWCNTs) offer a new possibility for phyto-nanotechnology and biotechnology to improve the quality and quantity of secondary metabolites in vitro. The current study aimed to determine the SWCNTs effects on Thyme (Thymus daenensis celak.) seed germination. The seedlings were further assessed in terms of morphological and phytochemical properties. Sterile seeds were cultured in vitro and treated with various concentrations of SWCNTs. Biochemical analyses were designed on seedling sample extracts for measuring antioxidant activities (AA), total flavonoids (TFC) and phenolic contents, and the main enzymes involved in oxidative reactions under experimental treatments. The results indicated that an increase in SWCNTs concentration can enhance the total percentage of seed germination. The improvement was observed in samples that received SWCNTs levels of up to 125 µg ml-1, even though seedling height and biomass accumulation decreased. Seedling growth parameters in the control samples were higher than those of grown in SWCNT-fortified media. This may have happened because of more oxidative damage as well as a rise in POD and PPO activities in tissues. Additionally, secondary metabolites and relevant enzyme activities showed that maximum amounts of TPC, TFC, AA and the highest PAL enzyme activity were detected in samples exposed to 62.5 µg ml-1 SWCNTs. Our findings reveal that SWCNTs in a concentration-dependent manner has different effects on T. daenensis morphological and phytochemical properties. Microscopic images analysis revealed that SWCNTs pierce cell walls, enter the plant cells and agglomerate in the cellular cytoplasm and cell walls. The findings provide insights into the regulatory mechanisms of SWCNTs on T. daenensis growth, germination and secondary metabolites production.

Deciphering morphological and biochemical responses of Salvia leriifolia to seed cold plasma treatment, priming, and foliar spraying with nano-salicylic acid

The pretreatment of seeds with cold plasma (CP) (0 and 100 w for 240 s), and salicylic acid priming (SA) (0 and 2 mM normal and nano form), and foliar spraying of SA at the six-leaf stage (0 and 2 mM normal and nano form) of Salvia leriifolia plants in field condition was studied. Compared to the control plants of S. leriifolia, the results showed that CP + both forms of SA priming + nano-SA spraying increased plant height, leaf length, plant dry weight, total phenol, and the activities of phenylalanine ammonia-lyase (PAL) and tyrosine ammonia-lyase (TAL) enzymes. The chlorophyll a and b contents in all treated plants remained either unchanged or decreased when compared to the control. The highest PAL activity was obtained in CP-free + hydro-priming + nano-SA foliar spraying. The highest content of caffeic acid was achieved in CP + SA priming + SA foliar spraying in the leaf. The maximum contents of rosmarinic and salvianolic acid were obtained in the control plants. In conclusion, CP and nano-SA can increase PAL and TAL activity and total phenol accumulation in S. leriifolia plants, but not rosmarinic and salvianolic acid contents. Other phenolic compound enzymes and their production require further study.

Comparative study on the toxic effects of secondary nanoplastics from biodegradable and conventional plastics on Streptomyces coelicolor M145

Because of the excellent properties, plastics have been widely used in the past decades and caused serious environmental issues. As an excellent substitute for conventional plastics, the biodegradable plastics have attracted increasing attention. However, biodegradable plastics may produce more micro/nanoplastics in the short time compared with conventional plastics, and cause more serious ecological risks. In this study, the short-term toxicity of nanoplastics released from biodegradable and conventional plastics on Streptomyces coelicolor M145 was investigated. After 30 days of degradation, the biodegradable microplastics, polylactic acid (PLA) and polyhydroxyalkanoates (PHA) released more secondary nanoplastics than conventional microplastics, polystyrene (PS). After exposure, PLA and PHA nanoplastics showed significant toxicity to M145. The survival rate of M145 cells was 16.1% after treatment with PLA nanoplastics for 7 days (PLA-7). The toxicity of PHA was lower than that of PLA. This might have been due to the agglomeration of PHA nanoplastics in the solution. Compared with the controls, the PS secondary nanoplastics showed no significant toxicity to M145. After the treatment, the production of antibiotics, actinorhodin (ACT) and undecylprodigiosin (RED), significantly increased. The yields of ACT and RED reached their maximum values after treatment with PLA-7, which were 4.2-fold and 2.1-fold higher than those of the controls, respectively. The addition of biodegradable nanoplastics significantly increased the expression of these key pathway-specific regulatory genes, leading to increased antibiotic production. This study provides toxicological insights into the impacts of conventional and biodegradable microplastics on S. coelicolor.

Foliar-applied nano-cerium dioxide differentially affect morpho-physiological traits and essential oil profile of Salvia mirzayanii Rech. f. & Esfand under drought stress and post-stress recovery conditions

Drought stress is known to diminish the growth and yield of plants by altering the physiological, biochemical and molecular processes, thus threatening food security worldwide. Nanoparticles (NPs) have emerged as an effective strategy to raise plant productivity under current rapid environmental challenges. However, there is little literature on mechanisms underlying the beneficial role of re-watering in drought-stressed plants treated with NPs. In this study, the effects of cerium dioxide nanoparticles [(CeO2 NPs), 0 (control), 125, 250, 500, and 1000 mL L-1] were investigated on morpho-physiological and phytochemical traits of Salvia mirzayanii plants under different drought stress intensities [(25%, 50%, 75%, and 100% (control) of field capacity (FC) moisture] and post-stress re-watering (recovery) in a three-way factorial arrangement based on randomized complete block design. Uptake and accumulation of CeO2 NPs in the leaf tissue of plant samples were confirmed using SEM and EDX techniques. The results of ANOVA demonstrated that growth and physio-phytochemical traits were significantly (p < 0.05) affected by individual treatment and/or their double and triple interactions. Exposure to various levels of CeO2 NPs during drought stress mitigated the adverse effects of stress on growth parameters (e.g., plant height, shoot and root dry weights, and root length) and photosynthetic pigments (chlorophyll a and b) content compared to the respective controls in varying degrees. However, proline and essential oil content were increased in drought-stressed plants, and tended to decrease during the period of recovery. Before re-watering, the antioxidant enzymes, CAT, POD, and SOD, activity in leaf tissues was increased with the increase of drought stress intensity upon both treated and non-treated CeO2 NPs conditions. However, the three-way interaction results demonstrated that recovery after drought stress following CeO2 NPs application particularly 1000 mL L-1 decreased the activity of antioxidant enzymes compared to the controls. Based on GC and GC-MS analysis, all essential oil samples predominantly composed of oxygenated monoterpenes and sesquiterpenes including Decane, Spathulenol, Octane, α-Terpinyl acetate, Hexyl isovalerate, Dodecane, Butanoic acid, Linalool, δ-Cadinene, Muurolol, α-Cadinol, Eudesm-7(11)-en-4-ol, which significantly (p < 0.05) changed under different experimental treatments. The recovery after stress, however, increased only the content of δ-Cadinene in plants from severe drought stress upon foliar application of 1000 mL L-1 CeO2 NPs compared to the non-recovery period. Conclusively, integrative use of CeO2 NPs and re-watering after drought stress could be an encouraging and eco-friendly strategy to improve both drought tolerance, growth and pyhtochemical contents in S. mirzayanii plants.

Nanotoxicity assessment in plants: an updated overview

Nanotechnology is rapidly emerging and innovative interdisciplinary field of science. The application of nanomaterials in agricultural biotechnology has been exponentially increased over the years that could be attributed to their uniqueness, versatility, and flexibility. The overuse of nanomaterials makes it crucial to determine their fate and distribution in the in vitro (in cell and tissue cultures) and in vivo (in living species) biological environments by investigating the nano-biointerface. The literature states that the beneficial effects of nanoparticles come along with their adverse effects, subsequently leading to an array of short-term and long-term toxicities. It has been evident that the interplay of nanoparticles with abiotic and biotic communities produces several eco-toxicological effects, and the physiology and biochemistry of crops are greatly influenced by the metabolic alterations taking place at cellular, sub-cellular, and molecular levels. Numerous risk factors affect nanoparticle's accumulation, translocation, and associated cytogenotoxicity. This review article summarizes the contributing factors, possible mechanisms, and risk assessment of hazardous effects of various types of nanoparticles to plant health. The methods for evaluating the plant nanotoxicity parameters have been elaborated. Conclusively, few recommendations are put forward for designing safer, high-quality nanomaterials to protect and maintain environmental safety for smarter agriculture demanded by researchers and industrialists.

How Can Biological and Chemical Silver Nanoparticles Positively Impact Physio-Chemical and Chloroplast Ultrastructural Characteristics of Vicia faba Seedlings?

Through interactions with plant cells, silver nanoparticles (AgNPs) with both biological and chemical origins can stimulate physiological and metabolic processes in plants. To ensure their safe application in the food chain, it is necessary to investigate their effects on plant systems. Therefore, the effects of chemical AgNPs (chem-AgNPs) and biologically synthesized AgNPs (bio-AgNPs) at different levels (i.e., 0, 10, and 50 ppm) on physiological and biochemical traits {i.e., root and shoot growth traits, photosynthetic pigments (Chl a, Chl b, carotenoids, and total pigments), soluble sugars, total carbohydrates, starch, H₂O₂, and antioxidant enzyme activities} of Vicia faba L. seedlings were investigated. AgNPs were biosynthesized from silver nitrate (AgNO₃) by a green synthesis approach using Jatropha curcas seed extract. The synthesized AgNPs were characterized by UV-vis spectroscopy, transmission electron microscopy (TEM), zeta potential, Fourier-transform infrared spectra (FT-IR), and X-ray diffraction (XRD). The results showed that bio-AgNPs at 10 ppm resulted in the highest growth, physiological, and biological traits of faba bean seedlings in comparison with those obtained from both AgNO₃ and chem-AgNPs treatments. On the other hand, all AgNPs treatments adversely affected the chloroplast ultrastructure, however, fewer negative effects were obtained with the application of 10 ppm bio-AgNPs. In addition, the roots and shoots of seedlings contained the lowest Ag content under different treatments at 10 ppm AgNPs in comparison to the highest level of AgNPs (50 ppm), which indicates that additional studies should be incorporated to ensure safe use of lower concentrations of bio-AgNPs in seed priming. In conclusion, the application of biogenic nanoparticles at 10 ppm can be recommended to enhance plant growth and the productivity of strategic crops.

Biochemical and phytochemical responses of Ammi visnaga L. (Apiaceae) callus culture elicited by SiO2 and graphene Oxide-SiO2 nanoparticles

Ammi visnaga L. is an enriched medicinal plant with medicinally important compounds. Two types of nanoparticles (NPs) including silica (SiO₂) and graphene oxide bound with SiO₂ (GO-SiO₂) NPs at different concentrations (0, 15, 25 mg L^-1) were used as elicitors to investigate their effects on callus morphology, H₂O₂ content, total phenolic content (TPC), total flavonoids content (TFC), ferric reducing/antioxidant power (FRAP), and few antioxidant enzymes such as catalase (CAT), guaiacol peroxidase (GPX), superoxide dismutase (SOD), ascorbate peroxidase (APX), and polyphenol oxidase (PPO) in the callus cultures of A. visnaga. The effects of elicitation of both NPs on calli were observed using a scanning electron microscope (SEM). The 15 mg L^-1 concentration of GO-SiO₂ NPs produced the highest TPC (193.3 mg GAE g^-1 FW), CAT (13.1 U mg^-1 Protein), GPX (0.0089 U mg^-1 Protein), and APX (0.079 U mg^-1 Protein). Whereas, the maximum content of H₂O₂ (0.68 μmol g^-1 FW), FRAP (0.0092 μmol mg^-1), and TFC (62.27 mg QE g^-1 FW) was observed at 25 mg L^-1 and 15 mg L^-1 of SiO₂ NPs, respectively. Conclusively, in the callus culture of A. visnaga, the 15 mg L^-1 concentration of GO-SiO₂ NPs was the most suitable dosage for enhancing the enzymatic antioxidant activities (CAT, GPX, APX) and TPC, rather than SiO₂ NPs.

Nanobionics: A Sustainable Agricultural Approach towards Understanding Plant Response to Heavy Metals, Drought, and Salt Stress

In the current scenario, the rising concentration of heavy metals (HMs) due to anthropogenic activities is a severe problem. Plants are very much affected by HM pollution as well as other abiotic stress such as salinity and drought. It is very important to fulfil the nutritional demands of an ever-growing population in these adverse environmental conditions and/or stresses. Remediation of HM in contaminated soil is executed through physical and chemical processes which are costly, time-consuming, and non-sustainable. The application of nanobionics in crop resilience with enhanced stress tolerance may be the safe and sustainable strategy to increase crop yield. Thus, this review emphasizes the impact of nanobionics on the physiological traits and growth indices of plants. Major concerns and stress tolerance associated with the use of nanobionics are also deliberated concisely. The nanobionic approach to plant physiological traits and stress tolerance would lead to an epoch of plant research at the frontier of nanotechnology and plant biology.

Foliar-applied nanoscale zero-valent iron (nZVI) and iron oxide (Fe3O4) induce differential responses in growth, physiology, antioxidative defense and biochemical indices in Leonurus cardiaca L

The impacts of nZVI and iron oxides on growth, physiology and elicitation of bioactive antioxidant metabolites in medicinal aromatic plants must be critically assessed to ensure their safe utilization within the food chain and achieve nutritional gains. The present study investigated and compared the morpho-physiological and biochemical changes of Leonurus cardiaca L. plants as affected by various concentrations (0, 250, 500 and 1000 mg L^-1) of nZVI and Fe₃O₄. The foliar uptake of nZVI was verified through Scanning Electron Microscopy (SEM) images and Energy Dispersive X-ray (EDX) analytical spectra. Plants exposed to nZVI at low concentration showed comparatively monotonic deposition of NPs on the surface of leaves, however, the agglomerate size of nZVI was raised as their doses increased, leading to remarkable changes in anatomical and biochemical traits. 250 mg L^-1 nZVI and 500 mg L^-1 Fe₃O₄ significantly (P < 0.05) increased plant dry matter accumulation by 37.8 and 27% over the control, respectively. The treatments of nZVI and Fe₃O₄ at 250 mg L^-1 significantly (P < 0.01) improved chlorophyll a content by 22.4% and 15.3% as compared to the control, and then a rapid decrease (by 14.8% and 4.1%) followed at 1000 mg L^-1, respectively. Both nZVI and Fe₃O₄ at 250 mg L^-1 had no significant impact on malondialdehyde (MDA) formation, however, at an exposure of 500-1000 mg L^-1, the MDA levels and cellular electrolyte leakage were increased. Although nZVI particles could be utilized by plants and enhanced the synthesis of chlorophylls and secondary metabolites, they appeared to be more toxic than Fe₃O₄ at 1000 mg L^-1. Exposure to nZVI levels showed positive, negative and or neutral impacts on leaf water content compared to control, while no significant difference was observed with Fe₃O₄ treatments. Soluble sugar, total phenolics and hyperoside content were significantly increased upon optimum concentrations of employed treatments-with 250 mg L^-1 nZVI being most superior. Among the extracts, those obtained from plants treated with 250-500 mg L^-1 nZVI revealed the strong antioxidant activity in terms of scavenging free radical (DPPH) and chelating ferrous ions. These results suggest that nZVI (at lower concentration) has alternative and additional benefits both as nano-fertilizer and nano-elicitor for biosynthesis of antioxidant metabolites in plants, but at high concentrations is more toxic than Fe₃O₄.

The potential of bacterial microcompartment architectures for phytonanotechnology

The application of nanotechnology to plants, termed phytonanotechnology, has the potential to revolutionize plant research and agricultural production. Advancements in phytonanotechnology will allow for the time-controlled and target-specific release of bioactive compounds and agrochemicals to alter and optimize conventional plant production systems. A diverse range of engineered nanoparticles with unique physiochemical properties is currently being investigated to determine their suitability for plants. Improvements in crop yield, disease resistance and nutrient and pesticide management are all possible using designed nanocarriers. However, despite these prospective benefits, research to thoroughly understand the precise activity, localization and potential phytotoxicity of these nanoparticles within plant systems is required. Protein-based bacterial microcompartment shell proteins that self-assemble into spherical shells, nanotubes and sheets could be of immense value for phytonanotechnology due to their ease of manipulation, multifunctionality, rapid and efficient producibility and biodegradability. In this review, we explore bacterial microcompartment-based architectures within the scope of phytonanotechnology.

Metallophenolomics: A Novel Integrated Approach to Study Complexation of Plant Phenolics with Metal/Metalloid Ions

Plant adaptive strategies have been shaped during evolutionary development in the constant interaction with a plethora of environmental factors, including the presence of metals/metalloids in the environment. Among adaptive reactions against either the excess of trace elements or toxic doses of non-essential elements, their complexation with molecular endogenous ligands, including phenolics, has received increasing attention. Currently, the complexation of phenolics with metal(loid)s is a topic of intensive studies in different scientific fields. In spite of the numerous studies on their chelating capacity, the systemic analysis of phenolics as plant ligands has not been performed yet. Such a systematizing can be performed based on the modern approach of metallomics as an integral biometal science, which in turn has been differentiated into subgroups according to the nature of the bioligands. In this regard, the present review summarizes phenolics–metal(loid)s’ interactions using the metallomic approach. Experimental results on the chelating activity of representative compounds from different phenolic subgroups in vitro and in vivo are systematized. General properties of phenolic ligands and specific properties of anthocyanins are revealed. The novel concept of metallophenolomics is proposed, as a ligand-oriented subgroup of metallomics, which is an integrated approach to study phenolics–metal(loid)s’ complexations. The research subjects of metallophenolomics are outlined according to the methodology of metallomic studies, including mission-oriented biometal sciences (environmental sciences, food sciences and nutrition, medicine, cosmetology, coloration technologies, chemical sciences, material sciences, solar cell sciences). Metallophenolomics opens new prospects to unite multidisciplinary investigations of phenolic–metal(loid) interactions.

Pre-Harvest Application of Multi-Walled Carbon Nanotubes Improves the Antioxidant Capacity of ‘Flame Seedless’ Grapes during Storage

As a widely distributed fruit, grapes are susceptible to oxidative damage during storage and transportation, resulting in declining quality and commodity value. This study aimed to investigate the effects of preharvest application of different concentrations of multi-walled carbon nanotubes (MWCNTs) on the postharvest quality of ‘Flame Seedless’ grapes. The results showed that low-concentration (25 and 50 mg L−1) MWCNTs treatments maintained the comprehensive quality index, firmness, soluble sugar, titratable acid, pH value, and ascorbic acid (AsA) content of grapes. MWCNTs at 25 and 50 mg L−1 increased the activities of peroxidase (POD), catalase (CAT), superoxide dismutase (SOD), and ascorbic acid (APX). Furthermore, MWCNTs reduced the malondialdehyde (MDA) content and decreased the accumulation of excessive reactive oxygen species (ROS) in grape peel and pulp tissues. In addition, transmission electron microscopy (TEM) images demonstrated that MWCNTs were absorbed by parenchymal cells in the grape peel and pulp through the epidermal cell layer. MWCNTs with a specific concentration can be used as a new inducer for the biosynthesis of antioxidants to reduce oxidative damage in grapes during storage.

Nano-priming as emerging seed priming technology for sustainable agriculture-recent developments and future perspectives

Nano-priming is an innovative seed priming technology that helps to improve seed germination, seed growth, and yield by providing resistance to various stresses in plants. Nano-priming is a considerably more effective method compared to all other seed priming methods. The salient features of nanoparticles (NPs) in seed priming are to develop electron exchange and enhanced surface reaction capabilities associated with various components of plant cells and tissues. Nano-priming induces the formation of nanopores in shoot and helps in the uptake of water absorption, activates reactive oxygen species (ROS)/antioxidant mechanisms in seeds, and forms hydroxyl radicals to loosen the walls of the cells and acts as an inducer for rapid hydrolysis of starch. It also induces the expression of aquaporin genes that are involved in the intake of water and also mediates H₂O_2, or ROS, dispersed over biological membranes. Nano-priming induces starch degradation via the stimulation of amylase, which results in the stimulation of seed germination. Nano-priming induces a mild ROS that acts as a primary signaling cue for various signaling cascade events that participate in secondary metabolite production and stress tolerance. This review provides details on the possible mechanisms by which nano-priming induces breaking seed dormancy, promotion of seed germination, and their impact on primary and secondary metabolite production. In addition, the use of nano-based fertilizer and pesticides as effective materials in nano-priming and plant growth development were also discussed, considering their recent status and future perspectives.

Interaction of hyperaccumulating plants with Zn and Cd nanoparticles

Metal hyperaccumulating plant species are an interesting example of natural selection and environmental adaptation but they may also be useful to developing new technologies of environmental monitoring and remediation. Noccaea caerulescens and Arabidopsis halleri are both Brassicaceae and are known metal hyperaccumulators. This study evaluated tolerance, uptake and translocation of zinc sulfide quantum dots by N. cearulescens and cadmium sulfide quantum dots by A. halleri in direct comparison with the non-hyperaccumulator, genetically similar T. perfoliatum and A. thaliana. Growth media were supplied with two different concentrations of metal in either salt (ZnSO₄ and CdSO₄) or nanoscale form (ZnS QDs and CdS QDs). After 30 days of exposure, the concentration of metals in the soil, roots and leaves was determined. Uptake and localization of the metal in both nanoscale and non-nanoscale form inside plant tissues was investigated by Environmental Scanning Electron Microscopy (ESEM) equipped with an X-ray probe. Specifically, the hyperaccumulators in comparison with the non-hyperaccumulators accumulate ionic and nanoscale Zn and Cd in the aerial parts with a BCF ratio of 45.9 for Zn ion, 49.6 for nanoscale Zn, 2.64 for Cd ion and 2.54 for nanoscale Cd. Results obtained with a differential extraction analytical procedure also showed that a significant fraction of nanoscale metals remained inside the plants in a form compatible with the retention of at least a partial initial structure. The molecular consequences of the hyperaccumulation of nanoscale materials are discussed considering data obtained with hyperaccumulation of ionic metal. This is the first report of conventional hyperaccumulating plants demonstrating an ability to hyperaccumulate also engineered nanomaterials (ENMs) and suggests a potential novel strategy for not only understanding plant-nanomaterial interactions but also for potential biomonitoring in the environment to avoid their entering into the food chains.

Nanoparticles as potential hallmarks of drought stress tolerance in plants

Plants are inevitably exposed to drought stress limiting their growth and causing yield loss, thus inciting food crises across the world. Nanoparticles (NPs) are regarded as effective and promising tools for modulation of crop yield to overcome current and future constraints in sustainable agricultural production by upgrading the plant tolerance mechanism under abiotic stress conditions, including drought. NPs exhibit alleviating effects against drought stress via induction of physiological and biochemical readjustments accompanied by modulation of gene expression involved in drought response/tolerance. NPs ameliorate drought-induced reduction in carbon assimilation via increasing the photosynthetic activity. The improved root growth, upregulation of aquaporins, modification of intracellular water metabolism, accumulation of compatible solutes and ion homeostasis are the major mechanisms used by NPs to mitigate the osmotic stress caused by water deficit. NPs reduce water loss from leaves through stomatal closure due to fostered abscisic acid (ABA) accumulation and ameliorate oxidative stress damage by reducing reactive oxygen species and activating the antioxidant defense system. This review provides an evolutionary foundation regarding drought stress in plant life and summarizes the interactions between NPs and plants under drought. The subsequent impact of NPs on plant development and productivity and recent nanobiotechnological approaches to improve drought stress resilience are presented. On the whole, this review highlights the significance of NPs in dealing with the global problem of water scarcity faced by farmers.

Foliar carbon dot amendment modulates carbohydrate metabolism, rhizospheric properties and drought tolerance in maize seedling

Improving maize drought tolerance is of great importance for scaling up production due to food security and population growth. Carbon dots (CDs) were synthesized by hydrothermal method with citric acid and ethylenediamine as carbon sources. Then, CDs (5 ml, 5 mg‧L^-1) were sprayed on 25th day-old maize (Zea mays L., drought-stress, 35% soil moisture) for seven consecutive days (spraying ultra-pure water as control), after which the physiological parameters and rhizospheric properties of maize under drought were evaluated. Foliar sprayed CDs (5 mg‧L^-1) could increase root exudates (e.g., succinic acid (14.5 folds), pyruvic acid (10.0 folds), and betaine (11.8 folds)), and modify microbial community. Particularly, the relative abundance of Pseudomonas, Sphingomonas, Nitrospira, and Conocybe were significantly increased by 344.4%, 233.3%, 126.2%, and 122.6%, respectively. The altered microbial abundance could improve soil available nitrogen and phosphorus by 33.5% and 16.8%, respectively, and increase plant water uptake by 37.2%. The change of exudate synthesis and microbial abundance could be driven by the significantly increased in net photosynthesis rate by 122.9%, and carbohydrate content by 35.4% in shoots and 113.6% in roots, respectively upon foliar application of CDs. Meanwhile, fresh weight of shoots and roots were increased by 62.1% and 50.6%, and dry weight of shoots and roots were increased by 29.2% and 37.5%, respectively. These results demonstrated that foliar application of CDs could improve the rhizosphere environment to enhance maize drought tolerance and even growth. Therefore, foliar application of CDs would be a promising strategy for sustainable nano-agriculture in response to drought stress.

Recent Advances in Plant Nanoscience

Plants have complex internal signaling pathways to quickly adjust to environmental changes and harvest energy from the environment. Facing the growing population, there is an urgent need for plant transformation and precise monitoring of plant growth to improve crop yields. Nanotechnology, an interdisciplinary research field, has recently been boosting plant yields and meeting global energy needs. In this context, a new field, "plant nanoscience," which describes the interaction between plants and nanotechnology, emerges as the times require. Nanosensors, nanofertilizers, nanopesticides, and nano-plant genetic engineering are of great help in increasing crop yields. Nanogenerators are helping to develop the potential of plants in the field of energy harvesting. Furthermore, the uptake and internalization of nanomaterials in plants and the possible effects are also worthy of attention. In this review, a forward-looking perspective on the plant nanoscience is presented and feasible solutions for future food shortages and energy crises are provided.

Differential effects of biogenic and chemically synthesized silver-nanoparticles application on physiological traits, antioxidative status and californidine content in California poppy (Eschscholzia californica Cham)

Silver nanoparticles (AgNPs) of both biologically and chemically origins trigger various physiological and metabolic processes through interaction with plant cells, exerting positive, negative and inconsequential effects. However, their impacts on plant systems must be critically investigated to guarantee their safe application in food chain. In this study, the effects of chemically synthesized (synthetic) AgNPs (sAgNPs) and biologically synthesized (biogenic) AgNPs (bAgNPs) on physiological and biochemical features of Eschscholzia californica Cham were evaluated at different concentrations (0, 10, 25, 50 and 100 mg L^-1). Plants exposed to bAgNPs (at 10 and 25 mg L^-1) and sAgNPs (at 10 mg L^-1) displayed relatively uniform deposition of AgNPs on leaf surface, however, the higher concentration (100 mg L^-1) was accompanied by aggregation of AgNPs, resulting in anatomical and physiological disorders. Foliar application of both AgNPs at lower concentrations resulted in significant (P < 0.01) improve in the content of photosynthetic pigments (chlorophylls a, b, a+b, and carotenoids) and total phenolics over the control in a dose-related manner. Leaf relative water content decreased steadily with increasing both sAgNPs and bAgNPs concentrations-with sAgNPs being more inhibitive. Both types of AgNPs at 100 mg L^-1 significantly (P < 0.05) increased electrolyte leakage index, level of lipid peroxidation product (malondialdehyde), and leaf soluble sugar content when compared to controls. No significant difference was found on cell membrane stability index among the plants exposed to bAgNPs and sAgNPs at the lowest concentration over the control. Californidine content was significantly (P < 0.01, by 45.1%) increased upon all the bAgNPs treatments (with a peak at 25 mg L^-1) relative to control. The obtained extracts from plants treated with bAgNPs at lower concentrations revealed a significant induction of antioxidant capacity (based on DPPH˙ free radical scavenging and ferrous ions-chelating activities) with lower IC₅₀ values compared to the other treatments. Conclusively, bAgNPs at lower concentrations are potent elicitors of pharmaceutically active compounds biosynthesis, which enhance physiological efficiency of E. californica, but at higher concentrations bAgNPs are equally toxic as sAgNPs.

Designer nanoparticles for plant cell culture systems: Mechanisms of elicitation and harnessing of specialized metabolites

Plant cell culture systems have become an attractive and sustainable approach to produce high-value and commercially significant metabolites under controlled conditions. Strategies involving elicitor supplementation into plant cell culture media are employed to mimic natural conditions for increasing the metabolite yield. Studies on nanoparticles (NPs) that have investigated elicitation of specialized metabolism have shown the potential of NPs to be a substitute for biotic elicitors such as phytohormones and microbial extracts. Customizable physicochemical characteristics allow the design of monodispersed-, stimulus-responsive-, and hormone-carrying-NPs of precise geometries to enhance their elicitation capabilities based on target metabolite/plant cell culture type. We contextualize advances in NP-mediated elicitation, especially stimulation of specialized metabolic pathways, the underlying mechanisms, impacts on gene regulation, and NP-associated cytotoxicity. The novelty of the concept lies in unleashing the potential of designer NPs to enhance yield, harness metabolites, and transform nanoelicitation from exploratory investigations to a commercially viable strategy.

A review on metal-based nanoparticles and their toxicity to beneficial soil bacteria and fungi

The unregulated deposition of metal-based nanoparticles in terrestrial ecosystems particularly in agricultural systems has alarmingly threatened the sustainability of the environment and diversity of beneficial microbial populations such as soil bacteria and fungi. This occurs due to the poor treatment of biosolids during wastewater treatment and their application in agricultural fields to enhance the fertility of soils. Continuous deposition, low biodegradability, and longer persistence of metal nanoparticles in soils adversely impact the population of soil beneficial bacteria and fungi. The current literature suggests the toxic outcome of nanoparticle-fungi and nanoparticle-bacteria interactions based on various toxicity endpoints. Therefore, due to the extreme importance of beneficial soil bacteria and fungi for soil fertility and plant growth, this review summarizes the production, application, release of metal nanoparticles in the soil system and their impact on various soil microbes specifically plant growth-promoting rhizobacteria, cellular toxicity and impact of nanoparticles on bioactive molecule production by microbes, destructive nanoparticle impact on unicellular, mycorrhizal, and cellulose/lignin degrading fungi. This review also highlights the molecular alterations in fungi and bacteria-induced by nanoparticles and suggests a plausible toxicity mechanism. This review advances the understanding of the nano-toxicity aspect as a common outcome of nanoparticles and fungi/bacteria interactions.

Comparative Analysis of Proteins Regulated during Cadmium Sulfide Quantum Dots Response in Arabidopsis thaliana Wild Type and Tolerant Mutants

In previous work, two independent Arabidopsis thaliana Ac/Ds transposon insertional mutant lines, atnp01 and atnp02, were identified that showed a higher level of tolerance than the wild type (wt) line to cadmium sulfide quantum dots (CdS QDs). The tolerance response was characterized at physiological, genetic and transcriptomic levels. In this work, a comparative analysis was performed on protein extracts from plantlets of the two mutants and of wt, each treated with 80 mg L^-1 CdS QDs. A comparative protein analysis was performed by 2D-PAGE, and proteins were characterized by MALDI-TOF/TOF mass spectrometry. Of 250 proteins identified from all three lines, 98 showed significant changes in relative abundance between control and CdS QD-treated plantlets. The wt, atnp01, and atnp02 control-treated pairs respectively showed 61, 31, and 31 proteins with differential expression. The two mutants had a different response to treatment in terms of type and quantity of up- and downregulated proteins. This difference became more striking when compared to wt. A network analysis of the proteins differentially expressed in atnp01 and atnp02 included several of those encoded by putative genes accommodating the transposons, which were responsible for regulation of some proteins identified in this study. These included nifu-like protein 3 (Nfu3), involved in chloroplast assembly, elongator complex 3 (Elo3), involved in transcriptional elongation, magnesium-chelate subunit-2 (Chli2), involved in chlorophyll biosynthesis, and protein phosphatase 2C (PP2C) which mediates abiotic stress response.

Leaching of graphene oxide nanosheets in simulated soil and their influences on microbial communities

With the wide use of graphene-like nanosheets, especially in agriculture, their release into the environment, it is crucial to grasp the fate of nanosheets in soil and minimum ecological risks. The present work discovered that leaching and migration of nanosheets (rGO) in soil is affected by soil porosity and adsorption processes. And the contents of rGO-Pd in soil layers and leachate increased and then decreased with the decreased of soil porosity. Moreover, physicochemical properties of rGO-Pd nanosheets changed by leaching processes, especially the changes of morphology, thickness and oxygen functional groups. Leaching of rGO-Pd also interfered the soil microbial homeostasis accompanied by the increase of microbial species richness and community diversity. In addition, rGO-Pd altered the usage of carbon sources by edaphon. The utilization of carbon sources by soil microbes, such as polymers, sugars, phenolic acids, carboxylic acids, amino acids, and amines, was also reduced by nanosheets. These findings provide new insights into environmental behaviors of nanomaterials and nanogeochemistry.

A review on in vivo and in vitro nanotoxicological studies in plants: A headlight for future targets

Owing to the unique properties and useful applications in numerous fields, nanomaterials (NMs) received a great attention. The mass production of NMs has raised major concern for the environment. Recently, some altered growth patterns in plants have been reported due to the plant-NMs interactions. However, for NMs safe applications in agriculture and medicine, a comprehensive understanding of bio-nano interactions is crucial. The main goal of this review article is to summarize the results of the toxicological studies that have shown the in vitro and in vivo interactions of NMs with plants. The toxicity mechanisms are briefly discussed in plants as the defense mechanism works to overcome the stress caused by NMs implications. Indeed, the impact of NMs on plants varies significantly with many factors including physicochemical properties of NMs, culture media, and plant species. To investigate the impacts, dose metrics is an important analysis for assaying toxicity and is discussed in the present article to broadly open up different aspects of nanotoxicological investigations. To access reliable quantification and measurement in laboratories, standardized methodologies are crucial for precise dose delivery of NMs to plants during exposure. Altogether, the information is significant to researchers to describe restrictions and future perspectives.

Metal Homeostasis and Gas Exchange Dynamics in Pisum sativum L. Exposed to Cerium Oxide Nanoparticles

Cerium dioxide nanoparticles are pollutants of emerging concern. They are rarely immobilized in the environment. This study extends our work on Pisum sativum L. as a model plant, cultivated worldwide, and is well suited for investigating additive interactions induced by nanoceria. Hydroponic cultivation, which prompts accurate plant growth control and three levels of CeO2 supplementation, were applied, namely, 100, 200, and 500 mg (Ce)/L. Phytotoxicity was estimated by fresh weights and photosynthesis parameters. Additionally, Ce, Cu, Zn, Mn, Fe, Ca, and Mg contents were analyzed by high-resolution continuum source atomic absorption and inductively coupled plasma optical emission techniques. Analysis of variance has proved that CeO2 nanoparticles affected metals uptake. In the roots, it decreased for Cu, Zn, Mn, Fe, and Mg, while a reversed process was observed for Ca. The latter is absorbed more intensively, but translocation to above-ground parts is hampered. At the same time, nanoparticulate CeO2 reduced Cu, Zn, Mn, Fe, and Ca accumulation in pea shoots. The lowest Ce concentration boosted the photosynthesis rate, while the remaining treatments did not induce significant changes. Plant growth stimulation was observed only for the 100 mg/L. To our knowledge, this is the first study that demonstrates the effect of nanoceria on photosynthesis-related parameters in peas.

Deciphering morpho-physiological and phytochemical attributes of Tanacetum parthenium L. plants exposed to C60 fullerene and salicylic acid

This study was aimed to evaluate the effects of C60 fullerene concentrations (0, 125, 250, 500 and 1000 mg/L) and salicylic acid (0 and 0.2 mM) on growth and phytochemical accumulation of two feverfew genotypes (Pharmasaat and Jelitto) in a factorial experiment based on completely randomized design with three replications. According to the ANOVA, triple interaction of treatments were significant on morphological and phytochmical traits, however, the main effect of treatments only affected physiological attributes. Application of salicylic acid differentially influenced the effects of various concentrations of C60 fullerene on growth traits of both genotypes. In Pharmasaat, foliar application of salicylic acid increased growth traits of plants exposed to C60 fullerene at all concentrations, however, it improved the growth of Jelitto at higher levels of fullerene. The maximum increase of flower + leaf dry weight was recorded at 1000 mg/L C60 fullerene in combination with salicylic acid compared to control for Jelitto. In Pharmasaat, the parthenolide content significantly increased following increase of C60 fullerene up to 250 mg/L with salicylic acid, but a rapid decrease followed at 500-1000 mg/L. SEM images showed a wider deposition (many spheres with different sizes) of C60 fullerene on leaf tissue of Pharmasaat exposed to high concentration, involving changes in trichome density and tissue rupture. The essential oil content was not significantly increased upon experimental treatments compared to control. Based on hierarchical cluster analysis, C60 fullerene and salicylic acid treatments caused to a co-induction of ion leakage, chlorophyll a, essential oil and parthenoloide in Pharmasaat.

Carbon nanotubes affect early growth, flowering time and phytohormones in tomato

Carbon nanotube (CNT) applications are increasing in consumer products, including agriculture devices, making them an important contaminant to study in the field of plant nanotoxicology. Several studies have observed the uptake and effects of CNTs in plants. However, in other studies differing results were observed on growth and physiology depending on the plant species and type of CNT. This study focused on the effects of CNTs on plant phenotype with growth, time to flowering, fruiting time as endpoints, and physiology, through amino acid and phytohormone content, in tomato after exposure to multiple types of CNTs. Plants grown in CNT-contaminated soil exhibited a delay in early growth and flowering (especially in treatments of 1 mg/kg multi-walled nanotubes (MWNTs), 10 mg/kg MWNTs, and 1 mg/kg MWNTs-COOH). However, CNTs did not affect plant growth or height later in the life cycle. No significant differences in abscisic acid (ABA) and citrulline content were observed between the treated and control plants. However, single-walled nanotube (SWNT) exposure significantly increased salicylic acid (SA) content in tomato. These results suggest that SWNTs may elicit a stress response in tomatoes. Results from this study offer more insight into how plants respond and acclimate to CNTs. These results will lead to a better understanding of CNT impact on plant phenotype and physiology.

Nano-enabled improvements of growth and nutritional quality in food plants driven by rhizosphere processes

With the rising global population growth and limitation of traditional agricultural technology, global crop production could not provide enough nutrients to assure adequate intake for all people. Nano-fertilizers and nano-pesticides have 20-30% higher efficacy than conventional products, which offer an effective solution to the above-mentioned problem. Rhizosphere is where plant roots, soil, and soil biota interact, and is the portal of nutrients transporting from soil into plants. The rhizosphere processes could modify the bioavailability of all nutrients and nanomaterials (NMs) before entering the food plants. However, to date, the overall rhizosphere processes regulating the behaviors and bioavailability of NMs to enhance the nutritional quality are still uncertain. In this review, a meta-analysis is conducted to quantitatively assess NMs-mediated changes in nutritional quality from food plants. Furthermore, the current knowledge and related mechanisms of the behavior and bioavailability of NMs driven by rhizosphere processes, e.g., root secretions, microbial and earthworm activities, are summarized. A series of rhizosphere processes can influence how NMs enter plants and change the biological responses, including signal transduction and nutrient absorption and transport. Moreover, future perspectives are presented to maximize the potentials of NMs applications for the enhancement of food crop production and global food security.

Variations of glaucine, quercetin and kaempferol contents in Nigella arvensis against Al2O3, NiO, and TiO2 nanoparticles

The present study was designed to determine the glaucine, quercetin and kaempferol contents in the root and shoot parts of Nigella arvensis, treated for 21 days with different concentrations of the nanoparticles (NPs), including titanium dioxide (TiO2), alumina (Al2O3) and nickel oxide (NiO) by high-performance liquid chromatography (HPLC). Results showed a significant increase in the total flavonoid and total alkaloid content in treated plants. Glaucine content in shoot parts was significantly higher than the root parts. The highest amount of glaucine was obtained in shoots and roots exposed to NiONPs at concentrations of 1000 and 2500 mg/L with up to 3.2 and 2.6 fold increase compared to the control group, respectively. The maximum content of quercetin was observed in the shoot and root parts under 50 mg/L NiONPs with 2.2 and 1.8 fold increase compared to the control group, respectively. The kaempferol content was significantly decreased in all treatment, except for 1000 mg/L NiONPs treatment in the root parts, which was 2.9 fold higher than the control group. Apart from the toxic effects of some NPs, our findings suggest that the NPs at specific levels can be considered as new and appropriate elicitors for in vitro production and increasing the biosynthesis of secondary metabolites to use in pharmaceutical applications.

Cadmium sulfide quantum dots impact Arabidopsis thaliana physiology and morphology

The differential mechanisms of CdS QDs (Quantum Dots) and Cd ion toxicity to Arabidopsis thaliana (L.) Heynh were investigated. Plants were exposed to 40 and 60 mg L^-1 for CdS QDs and 76.9 and 115.2 mg L^-1 CdSO₄·7H₂O and toxicity was evaluated at 5, 20, 35 (T5, T20, T35) days after exposure. Oxidative stress upon exposure was evaluated by biochemical essays targeting non-enzymatic oxidative stress physiological parameters, including respiration efficiency, total chlorophylls, carotenoids, ABTS and DPPH radicals reduction, total phenolics, GSH redox state, lipid peroxidation. Total Cd in plants was measured with AAS. Root and leaf morphology and element content were assessed in vivo utilizing low-vacuum Environmental Scanning Electron Microscopy (ESEM) with X-ray microanalysis (EDX). This integrated approach allowed identification of unique nanoscale CdS QDs toxicity to the plants that was distinct from CdSO₄ exposure. The analyses highlighted that CdS QDs and Cd ions effects are modulated by the developmental stage of the plant, starting from T20 till T35 the plant development was modulated by the treatments, in particular CdS QDs induced early flowering. Both treatments induced Fe accumulation in roots, but at different intensities, while CdS QDs was associated with Mn increase into plant leaf. CdSO₄ elicited higher levels of oxidative stress compared with QDs, especially the former treatment caused more intense respiration damages and reduction in chlorophyll and carotenoids than the latter. The two types of treatments impact differently on root and leaf morphology.

Advances in nanomaterials as novel elicitors of pharmacologically active plant specialized metabolites: current status and future outlooks

During the last few decades major advances have shed light on nanotechnology. Nanomaterials have been widely used in various fields such as medicine, energy, cosmetics, electronics, biotechnology and pharmaceuticals. Owing to their unique physicochemical characteristics and nanoscale structures, nanoparticles (NPs) have the capacity to enter into plant cells and interact with intracellular organelles and various metabolites. The effects of NPs on plant growth, development, physiology and biochemistry have been reported, but their impact on plant specialized metabolism (aka as secondary metabolism) still remains obscure. In reaction to environmental stress and elicitors, a common response in plants results in the production or activation of different types of specialized metabolites (e.g., alkaloids, terpenoids, phenolics and flavonoids). These plant specialized metabolites (SMs) are important for plant adaptation to an adverse environment, but also a huge number of them are biologically active and used in various commercially-valued products (pharmacy, cosmetic, agriculture, food/feed). Due to their wide array of applications, SMs have attracted much attention to explore and develop new strategies to enhance their production in plants. In this context, NPs emerged as a novel class of effective elicitors to enhance the production of various plant SMs. In recent years, many reports have been published regarding the elicitation of SMs by different types of NPs. However, in order to achieve an enhanced and sustainable production of these SMs, in-depth studies are required to figure out the most suitable NP in terms of type, size and/or effective concentration, along with a more complete understanding about their uptake, translocation, internalization and elicitation mechanisms. Herein, we are presenting a comprehensive and critical account of the plant SMs elicitation capacities of the three main classes of nanomaterials (i.e., metallic NPs (MNPs), metal oxide NPs (MONPs) and carbon related nanomaterials). Their different proposed uptake, translocation and internalization pathways as well as elicitation mechanism along with their possible deleterious effect on plant SMs and/or phytotoxic effects are summarized. We also identified and critically discussed the current research gaps existing in this field and requiring future investigation to further improve the use of these nanomaterials for an efficient production of plant SMs.

Manganese accumulation and plant physiology behavior of Camellia oleifera in response to different levels of nitrogen fertilization

Manganese (Mn) pollution in soil, especially around the mining areas, is a severe problem in China. Seeking for effective remediation methods for Mn-contaminated soil is therefore urgent and necessary. Camellia oleifera (C. oleifera) is one of the world's four major woody oil plants, which is widely cultivated in subtropical acidic soils for oil production and has become an important economic and ecological resource in Guangxi Province. Nitrogen (N) is one of the most common limiting factors for plant growth and development in soils. We carried out this study to evaluate the effects of different N fertilization levels (0, 100, 300 and 500 mg kg^-1) on the morphological and physiological characteristics of C. oleifera in two soils with different Mn-contamination degrees. The results indicate that N fertilization affected the plant growth and the content of photosynthetic pigments, while C. oleifera accumulated great amounts of Mn in both soils. However, the plant biomass reduced significantly at the high-level N fertilization (≥300 mg kg^-1), and the oxidative stress was stimulated under Mn contamination. As a comparison, the plant biomass remained unaffected at the low-level N fertilization (100 mg kg^-1), and the ascorbate peroxidase (APX) activity in C. oleifera leaves were enhanced to alleviate the oxidative stress and therefore protecting the plant from Mn contamination. Meanwhile, plants supplemented with a low-level of N fertilizer (100 mg kg^-1) had appropriate antioxidant enzyme and nonenzymatic antioxidant activities, which indicates that this was favorable growth conditions for C. oleifera. Thus, the recommended N fertilization level for maintaining plant biomass and increasing Mn accumulation in plant is 100 mg kg^-1 N; at which level the efficiency of Mn phytoremediation by C. oleifera can be further enhanced.

Effect of alumina (Al2O3) nanoparticles and macroparticles on Trigonella foenum-graceum L. in vitro cultures: assessment of growth parameters and oxidative stress-related responses

The impact of 100 μg ml-1 alumina (Al2O3) nanoparticles (NPs) on Trigonella foenum (fenugreek) in vitro cultures was studied within 3 weeks (on days 1, 7, 14, and 21) and compared with the control and bulk (macrometer-sized particles) alumina-treated groups. Transmission electron microscopy (TEM) and dynamic light scattering were used for the characterization of NPs. The results of TEM analysis represented a nearly spherical shape for the NPs with agglomeration. The zeta potential of alumina NPs was - 25.4 ± 2.5 mV and the averaged diameter was 20 ± 5 nm. Atomic absorption and inductively coupled plasma-optical emission spectroscopy provided evidence for the release and uptake of aluminum. Treatment of cultures with NPs led to an increase in the formation of lateral roots. Treatment of fenugreek with bulk alumina caused a significant decrease in the number of leaves on day 21 (p < 0.05) and the root length on days 14 and 21 compared with the control group (p < 0.05). Alumina NP has led to a significant increase in the malondialdehyde content on days 7, 14, and 21 (p < 0.001). The glutathione content was decreased significantly in NP and bulk-treated groups on days 1 and 7 (p < 0.05). FRAP assay results showed that NPs and bulk alumina led to a decrease in the antioxidant power on days 7, 14, and 21 (p < 0.001). The increased activity of catalase (p < 0.001) and ascorbate peroxidase (p < 0.001) was observed in the bulk-treated group. Lignin content had a significant increase in response to NPs on days 14 and 21 (p < 0.001). Conclusively, alumina nano/macro particles affected agronomical and physiological properties of T. foenum; however, smaller sized particles do not necessarily imply greater toxicity, while uptake of the aluminum ions should be considered seriously.

Physiological and antioxidative responses to GO/PANI nanocomposite in intact and demucilaged seeds and young seedlings of Salvia mirzayanii

The current study aimed to investigate the impacts of different concentrations of GO/PANI nanocomposites (25, 50 and 100 mg L^-1), in comparison with GO and PANI, on seed germination behaviors, morpho-physiological and biochemical traits in intact (mucilaginous) and demucilaged seeds, and young seedlings of the medicinal plant Salvia mirzayanii. Upon exposure to GO, seed germination was delayed and reduced, and growth attributes (root and shoot length, shoot fresh weight, and total chlorophyll content) declined, all of which could be attributed to the reductions in water uptake and oxidative stress particularly in demucilaged seeds. A hormetic dose-dependent response was observed for the growth traits in both intact and demucilaged seedlings upon exposure to GO/PANI concentrations, i.e. low-concentration stimulation and high-concentration repression. Elevated levels of H₂O₂ in shoot tissue of the seedlings exposed to GO and high concentration of GO/PANI, in comparison with those exposed to low levels of GO/PANI and control, were linked with the activities of the antioxidant enzymes SOD, CAT, POD, and total phenolics. Overall, the results showed high toxicity of GO on germination and early growth of S. mirzayani that was more evident in demucilaged seedlings, whereas GO/PANI stimulated germination, and the effects on seedling growth were stimulatory or inhibitory depending on the application dose and presence of mucilage. Furthermore, the capacity of GO/PANI nanocomposites to improve germination and cause a regular porosity pattern in roots accompanied by improved water uptake and early establishment of S. mirzayanii propose potential implications of GO/PANI nanocomposites for seeds/plants in drought-prone ecosystems.

Effect of explant source, perlite nanoparticles and TiO2/perlite nanocomposites on phytochemical composition of metabolites in callus cultures of Hypericum perforatum

It appears that the biologically-synthesized nanoparticles (NPs) have potential to perform as effective elicitors for the production of valuable secondary metabolites in plants. Besides, it has been reported that the toxicity of the biologically-synthesized NP is not as much as that of the chemically-synthesized NPs. Therefore, it is necessary to test their advantages aspects. In this study, the physical synthesis of perlite NPs and biologically-synthesis of TiO₂/perlite nanocomposites (NCs) were conducted. Subsequently, their effects and explant source influence on the growth characteristics and secondary metabolite profiles of Hypericum perforatum callus cultures were evaluated. According to the obtained results, morphology of the synthesized perlite NPs and TiO₂/perlite NCs were mesoporous and spherical with sizes ranging about 14.51–23.34 and 15.50–24.61 nm, respectively. Addition of perlite NPs and TiO₂/perlite NCs to the culture medium at the concentration range of 25–200 mg/L showed no adverse impacts on the growth characteristics of H. perforatum calli. According to the GC-MS analysis, the stress caused by perlite NPs and TiO₂/perlite NCs led to an increase in the variety, amount and number of volatile compounds. The calli obtained from in vitro grown plants produced more volatile compounds relative to the calli obtained from field grown plants under the nanomaterial stress conditions. The production of hypericin and pseudohypericin were also determined in the callus cultures under desired nanomaterials elicitation. Accordingly, our results suggest that perlite NPs and TiO₂/perlite NCs can possibly be considered as effective elicitors for the production of volatile compounds, hypericin, and pseudohypericin in callus cultures of H. perforatum.

Are Nanoparticles a Threat to Mycorrhizal and Rhizobial Symbioses? A Critical Review

Soil microorganisms can be exposed to, and affected by, nanoparticles (NPs) that are either purposely released into the environment (e.g., nanoagrochemicals and NP-containing amendments) or reach soil as nanomaterial contaminants. It is crucial to evaluate the potential impact of NPs on key plant-microbe symbioses such as mycorrhizas and rhizobia, which are vital for health, functioning and sustainability of both natural and agricultural ecosystems. Our critical review of the literature indicates that NPs may have neutral, negative, or positive effects on development of mycorrhizal and rhizobial symbioses. The net effect of NPs on mycorrhizal development is driven by various factors including NPs type, speciation, size, concentration, fungal species, and soil physicochemical properties. As expected for potentially toxic substances, NPs concentration was found to be the most critical factor determining the toxicity of NPs against mycorrhizas, as even less toxic NPs such as ZnO NPs can be inhibitory at high concentrations, and highly toxic NPs such as Ag NPs can be stimulatory at low concentrations. Likewise, rhizobia show differential responses to NPs depending on the NPs concentration and the properties of NPs, rhizobia, and growth substrate, however, most rhizobial studies have been conducted in soil-less media, and the documented effects cannot be simply interpreted within soil systems in which complex interactions occur. Overall, most studies indicating adverse effects of NPs on mycorrhizas and rhizobia have been performed using either unrealistically high NP concentrations that are unlikely to occur in soil, or simple soil-less media (e.g., hydroponic cultures) that provide limited information about the processes occurring in the real environment/agrosystems. To safeguard these ecologically paramount associations, along with other ecotoxicological considerations, large-scale application of NPs in farming systems should be preceded by long-term field trials and requires an appropriate application rate and comprehensive (preferably case-specific) assessment of the context parameters i.e., the properties of NPs, microbial symbionts, and soil. Directions and priorities for future research are proposed based on the gaps and experimental restrictions identified.

Zinc Uptake, Photosynthetic Efficiency and Oxidative Stress in the Seagrass Cymodocea nodosa Exposed to ZnO Nanoparticles

We characterized zinc oxide nanoparticles (ZnO NPs) by dynamic light scattering (DLS) measurements, and transmission electron microscopy (TEM), while we evaluated photosystem II (PSII) responses, Zn uptake kinetics, and hydrogen peroxide (H₂O₂) accumulation, in C. nodosa exposed to 5 mg L⁻¹ and 10 mg L⁻¹ ZnO NPs for 4 h, 12 h, 24 h, 48 h and 72 h. Four h after exposure to 10 mg L⁻¹ ZnO NPs, we noticed a disturbance of PSII functioning that became more severe after 12 h. However, after a 24 h exposure to 10 mg L⁻¹ ZnO NPs, we observed a hormetic response, with both time and dose as the basal stress levels needed for induction of the adaptive response. This was achieved through the reduced plastoquinone (PQ) pool, at a 12 h exposure, which mediated the generation of chloroplastic H₂O₂; acting as a fast acclimation signaling molecule. Nevertheless, longer treatment (48 h and 72 h) resulted in decreasing the photoprotective mechanism to dissipate excess energy as heat (NPQ) and increasing the quantum yield of non-regulated energy loss (Φ_NO). This increased the formation of singlet oxygen (¹O₂), and decreased the fraction of open reaction centers, mostly after a 72-h exposure at 10 mg L⁻¹ ZnO NPs due to increased Zn uptake compared to 5 mg L⁻¹.

Biochar DOM for plant promotion but not residual biochar for metal immobilization depended on pyrolysis temperature

While biochar on metal immobilization was well understood, a small pool of dissolvable organic matter (DOM) from biochar was recently recognized as a bioactive agent for plant growth promotion. However, how the molecular composition and plant effects of this fraction and the performance for metal immobilization of the DOM-removed biochar could vary with pyrolysis temperature had been not well addressed. In this study, wheat straw biochar pyrolyzed at a temperature of 350 °C, 450 °C, 550 °C were extracted with hot water to separate the DOM fraction. The obtained biochar extracts (BE350, BE450, and BE550) were tested as foliar amendment to Chinese cabbage while the extracted (DOM-removed) biochars were tested for heavy metal immobilization in a contaminated soil. The results showed that BE350 was higher in organic matter content, abundance of organic molecules and mineral nutrients than BE450 and BE550. Compared to control, foliar application of BE350 significantly enhanced the shoot biomass (by 89%), increased leaf soluble sugar content (by 83%) but reduced leaf content of nitrate (by 34%) and of potential toxic metals (by 49% for Cd and by 30% for Pb). Moreover, BE350 treatment increased gene expression of nitrate reductase and glutamine synthetase enzyme activity of the tested plant. Meanwhile, soil amendment of DOM-extracted biochars significantly decreased soil CaCl₂ extractable pool of Cd, Pb, Cu and Zn in a range of 27%-78%. Thus, the performance of DOM extract of biochar on plant growth promotion was indeed dependent of pyrolysis temperature, being greater at 350 °C than at higher temperatures. In contrast, metal immobilizing capacity of biochar was regardless of pyrolysis temperature and DOM removal. Therefore, pyrolyzing wheat straw at low temperature could produce a biochar for valorized separation of a significant DOM pool for use in vegetable production, leaving the residual biochar for amendment to metal contaminated soil.

Uptake and Translocation of Styrene Maleic Anhydride Nanoparticles in Murraya exotica Plants As Revealed by Noninvasive, Real-Time Optical Bioimaging

This work reports the in vivo uptake and translocation of PNPs in the one-year grown terrestrial plant, Murraya exotica ( M. exotica), as investigated by two-photon excitation and time-resolved (TPE-TR) optical imaging with a large field of view (FOV, 32 × 32 mm²) in a noninvasive and real-time manner. The PNPs (⟨ R_h⟩ = 12 ± 4.5 nm) synthesized from poly(styrene- co-maleic anhydride) (SMA) were Eu-luminescence labeled (λ_L ≈ 617 nm). On exposing the roots of living M. exotica plants to the colloidal suspension of SMA PNPs at different concentrations, the spatiotemporal evolution of SMA PNPs along plant stems (60 mm in length) were monitored by TPE-TR imaging, which rendered rich information on the uptake and translocation of PNPs without any interference from the autofluorescence of the plant tissues. The TPE-TR imaging combined with the high-resolution anatomy revealed an intercell-wall route in the lignified epidermis of M. exotica plants for SMA PNP uptake and translocation, as well as the similar accumulation kinetics at different positions along the plant stems. We modeled the accumulation kinetics with Gaussian distribution to account for the trapping probability of a SMA PNP by the lignified cell walls, allowing the statistical parameters, the average trapping time ( t_m) and its variance (σ), to be derived for the quantification of the PNP accumulation in individual plants. The TPE-TR imaging and the analysis protocols established herein will be helpful in exploring the mechanism of plant-PNP interaction under physiological condition.

Lignin-induced growth inhibition in soybean exposed to iron oxide nanoparticles

Plants are occasionally exposed to environmental perturbations that limit their growth. One of these perturbations is the exposure to and interaction with various nanoparticles (NPs) that are discarded continuously into the environment. Hitherto, no study has been carried out evaluating the effects of iron oxide (γ-Fe2O3) NPs on soybean growth and lignin formation, as proposed herein. For comparative purposes, we also submitted soybean plants to non-nanoparticulate iron (FeCl3). Exposure of the plants to γ-Fe2O3 NPs increased cell wall-bound peroxidase (POD) activity but decreased phenylalanine ammonia lyase (PAL) activity due, probably, to the negative feedback of accumulated phenolic compounds. In contrast, FeCl3 decreased cell wall-bound POD activity. Both γ-Fe2O3 NPs and FeCl3 increased the lignin content of roots and stems. However, significant lignin-induced growth inhibition was noted only in stems after exposure to NPs, possibly due to changes in lignin monomer composition. In this case, γ-Fe2O3 NPs decreased the guaiacyl monomer content of roots but increased that of stems. The high levels of monomer guaiacyl in stems resulting from the action of γ-Fe2O3 NPs decreased syringyl/guaiacyl ratios, generating more highly cross-linked lignin followed by the stiffening of the cell wall and growth inhibition. In contrast, FeCl3 increased the contents of monomers p-hydroxyphenyl and syringyl in roots. The observed increase in the syringyl/guaiacyl ratio in plant roots submitted to FeCl3 agrees with the lack of effect on growth, due to the formation of a less condensed lignin. In brief, we here describe that γ-Fe2O3 NPs and FeCl3 act differently in soybean plants.

Elicitation of silver nanoparticles enhanced the secondary metabolites and pharmacological activities in cell suspension cultures of bitter gourd

This study describes the influence of bio-synthesized silver nanoparticles (AgNPs) on phytochemicals and their pharmacological activities in the cell suspension cultures (CSC) of bitter gourd. To standardize the effect of sucrose, plant growth regulators, medium, AgNPs and growth kinetics for the biomass and bioactive compounds accumulation in CSC of bitter gourd. The medium comprising MS salts, sucrose (30 g/L) with 2,4-D (1.0 mg/L) and TDZ (0.1 mg/L) at 28 days of CSC was appropriate for biomass and bioactive compound accumulation. The contents of silver, malondialdehyde and hydrogen peroxide were highly elevated in AgNPs (10 mg/L)-elicited CSC when compared with non-elicited CSC. AgNPs (5 mg/L) elicited CSC extracts had significantly enhanced the production of total phenolic (3.5 ± 0.2 mg/g), and flavonoid (2.5 ± 0.06 mg/g) contents than in the control CSC extracts (2.5 ± 0.1 and 1.6 ± 0.05 mg/g). AgNPs (5 mg/L) elicited CSC showed a higher amount of flavonols (1822.37 µg/g), hydroxybenzoic (1713.40 µg/g) and hydroxycinnamic (1080.10 µg/g) acids than the control CSC (1199, 1394.42 and 944.52 µg/g, respectively). Because of these metabolic changes, the pharmacological activities (antioxidant, antidiabetic, antibacterial, antifungal and anticancer) were high in the AgNPs (5 mg/L)-elicited CSC extracts in bitter gourd. The study suggested the effectiveness of elicitation process in enhancing the accumulation of phenolic compounds and pharmacological activities. AgNPs-elicited CSC offered an effective and favorable in vitro method to improve the production of bioactive compounds for potential uses in pharmaceutical industries.

Recent Developments on Nanotechnology in Agriculture: Plant Mineral Nutrition, Health, and Interactions with Soil Microflora

Plant mineral nutrition is important for obtaining higher agricultural productivity to meet the future demands of the increasing global human population. It is envisaged that nanotechnology can provide sustainable solutions by replacing traditional bulk fertilizers with their nanoparticulate counterparts possessing superior properties to overcome the current challenges of bioavailability and uptake of minerals, increasing crop yield, reducing fertilizer wastage, and protecting the environment. Recent studies have shown that nanoparticles of essential minerals and nonessential elements affect plant growth, physiology, and development, depending on their size, composition, concentration, and mode of application. The current review includes the recent findings on the positive as well as negative effects that nanofertilizers exert on plants when applied via foliar and soil routes, their effects on plant associated microorganisms, and potential for controlling agricultural pests. This review suggests future research needed for the development of sustained release nanofertilizers for enhancing food production and environmental protection.

Molybdenum Sulfide Induce Growth Enhancement Effect of Rice ( Oryza sativa L.) through Regulating the Synthesis of Chlorophyll and the Expression of Aquaporin Gene

Molybdenum sulfide (MoS₂) has been applied widely in industrial and environmental application, leading to increasing release into environment. So far, no studies have been investigated with regard to the potential effect of MoS₂ on plants. Herein, we studied the impact of MoS₂ on the growth, chlorophyll content, lipid peroxidation, antioxidase system, and aquaporins of rice for the first time. Results showed that MoS₂ did not significantly affect the germination of rice seeds, malonaldehyde (MDA) content, and the antioxidant enzyme activity. While the length and biomass of rice root and shoot, chlorophyll content index (CCI), and expression of aquaporin genes were significantly increased. Based on these results, we concluded that MoS₂ promoted rice growth through (i) the promotion of nitrogen source assimilation, (ii) the enhancement of photosynthesis, enzymatic-related biochemical reactions, and metabolic processes, subsequently, (iii) the acceleration of cell division and expansion, furthermore (iv) no abiotic stress and favorable condition of antioxidant enzyme system. These results provided an important insight into the further application of MoS₂ on agriculture and environment.

Pyrolysis of attapulgite clay blended with yak dung enhances pasture growth and soil health: Characterization and initial field trials

Recent studies have shown that the pyrolysis of biomass combined with clay can result in both lower cost and increase in plant yields. One of the major sources of nutrients for pasture growth, as well as fuel and building materials in Tibet is yak dung. This paper reports on the initial field testing in a pasture setting in Tibet using yak dung, biochar, and attapulgite clay/yak dung biochars produced at ratios of 10/90 and 50/50 clay to dung. We found that the treatment with attapulgite clay/yak dung (50/50) biochar resulted in the highest pasture yields and grass nutrition quality. We also measured the properties and yields of mixtures of clay/yak dung biochar used in the field trials produced at 400°C and 500°C to help determine a possible optimum final pyrolysis temperature and dung/clay ratio. It was observed that increasing clay content increased carbon stability, overall biochar yield, pore size, carboxyl and ketone/aldehyde functional groups, hematite and ferrous/ferric sulphate/thiosulphate concentration, surface area and magnetic moment. Decreasing clay content resulted in higher pH, CEC, N content and an enhanced ability to accept and donate electrons. The resulting properties were a complex function of both processing temperature and the percentage of clay for the biochars processed at both 400°C and 500°C. It is possible that the increase in yield and nutrient uptake in the field trial is related to the higher concentration of C/O functional groups, higher surface area and pore volume and higher content of Fe/O/S nanoparticles of multiple oxidation state in the 50/50 clay/dung. These properties have been found to significantly increase the abundance of beneficial microorganisms and hence improve the nutrient cycling and availability in soil. Further field trials are required to determine the optimum pyrolysis production conditions and application rate on the abundance of beneficial microorganisms, yields and nutrient quality.

Toxicity assessment of multi-walled carbon nanotubes on Cucurbita pepo L. under well-watered and water-stressed conditions

The rapid increase in the production and application of various types of nanomaterials increases the possibility of their presence in total environment, which subsequently raises concerns about their potential threats to the first trophic level of organisms, specifically under varying environmental constraints. In this work, seeds of Cucurbita pepo L. were cultured in MS basal medium exposed to multi-walled carbon nanotubes (MWCNTs) at different concentrations (0, 125, 250, 500 and 1000μgmL^-1) under two levels of water potential, well-watered (0MPa) and water stress (-1.5MPa) induced by polyethylene glycol (PEG 6000) for 14 days. Seeds exposed to MWCNTs showed reduction in germination percentage, root and shoot length, biomass accumulation and vigor index in a dose-dependent manner. However, seedlings germinated in MWCNTs-fortified media had significantly lower germination and growth attributes than those of control under water stress conditions. This happened due to increased oxidative injury indices including hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) contents, as well as electrolyte leakage index (ELI) of tissues. The impaired morpho-physiological and biochemical processes of seedlings exposed to different concentrations of MWCNTs under both PEG-induced stress and non-stress growing conditions were consequence of changes in the activation of various cellular antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (POD). Taken together, our findings reveal that MWCNTs played negative role on seed germination and subsequent growth of C. pepo L. seedlings under both levels of water potential.